RULEBOOK ON MACHINERY SAFETY ("Official Gazette of RS ", No. 13/2010) I INTRODUCTION PROVISIONS Article 1 This ong>Rulebookong> sets out the essential health and safety requirements relating to design and constructionof machinery, and other requirements and conditions that shall be met prior to placing machinery on the market or putting into service; the contents of Declarationof Conformity of the machinery and Declarationof Incorporationof partly completed machinery; the contents of technical documentation; conformity assessment procedures; criteria that shall be met by conformity assessment bodies to be notified; conformity mark and conformity marking; confidentiality and safeguard clause. Scope Article 2 This ong>Rulebookong> shall apply to the following machines and products: 1) Machinery; 2) Interchangeable equipment; 3) Safety components; 4) Lifting accessories; 5) Chains, ropes and webbing; 6) Removable mechanical transmission devices; 7) Partly completed machinery. Products excluded from the scope of this ong>Rulebookong> Article 3 This ong>Rulebookong> shall not apply to the following machines and products: 1) Safety components intended to be used as spare parts to replace identical components and supplied by the manufacturer of the original machinery; 2) Specific equipment for use in fairgrounds and/or amusement parks; 3) Machinery specially designed or put into service for nuclear purposes which, in the event of failure, may result in an emissionof radioactivity;
Machinery World was launched in 1982 to serve the machinery & production engineering market. Editorially Machinery World is a news and information source that gives direct contact with the provider of innovative services and equipment. Editorial is available both online and in hard copy.