Views
3 years ago

IRMA TRUpoint

IRMA TRUpoint

Uploading QC Values 1.

Uploading QC Values 1. Obtain the IRMA-specific assay sheets from the ITC website. 2. Access the Settings Options menu. 3. Press “QC”, press “controls”, “select”, “product type”, press “next”. 4. Press “add” to setup new control. 5. Select control level (1,2,3) and press “next”. 6. Enter control lot number and press “next”. 7. Enter control expiration date and press “next”. 8. Select analytes to be measured when running control and press “next”. 9. Enter or barcode scan in the control limits. 10. Uploading of control values will allow automatic flagging of any QC results that test out of range.

Defining Calculated Values QA Users can define the calculated values to be reported with each test and the formulas used to derive the calculated values using the Calculations option: 1. Go to Menu → Settings → Test → Calculations 2. Highlight Calculations and press edit. 3. Highlight Calculated Values from the picklist and press edit. 4. Highlight the calculated values to be reported (depending on product type) with each patient test, and press next. 5. Follow prompts and select settings. **See next slide for notes regarding normalized Ca++.

Irma Arguello - FMWG
The Media – Microbicide Friend or Foe? - IRMA
Irma Lagomarsino - California Biodiversity Council
IRMA 2012 prospectus - Escales-Verlag
Go tell it on Table Mountain - rectal microbicide advocacy ... - IRMA
IRMA – Brussels Mobility analysis tools - EasyWay ITS
Risques Infos n°29 - IRMa - Institut des risques majeurs
IRMA Survey on Lubes Used for Anal Sex: Preliminary Results
STK-2032 - Franklin Electronic Publishers, Inc.
Canon FAXPHONE L100 - FAXPHONE L100 Basic Operation Guide
Treasures ©2011 Correlation - MHEonline.com
Canon imageCLASS D530 - imageCLASS D530 Basic Operation Guide
Amstrad® - Astra2.org
Owner's Manual (V-Piano_OM.pdf) - Roland