3 years ago



Correlation Setting

Correlation Setting (Optional) • QA Users can establish correlation parameters for each IRMA TRUpoint product type to adjust IRMA TRUpoint patient test results to values that would be expected if samples were run on another reference analyzer. There are 2 correlation options: • Off: Correlation parameters will not be used by the analyzer to adjust IRMA TRUpoint patient test results. • On: Correlation parameters will be used by the analyzer to adjust IRMA TRUpoint patient test results.

Activating Correlations 1. Highlight Correlation from TEST SETTINGS and press edit. An Attention message appears, stating that adjusting correlation factors will affect future patient test results. Press ok. 2. Highlight the desired Product Type and press edit. 3. Highlight ”on” or ”off” button and press next. If ”on” is selected, go to “Establishing or Changing Correlation Factors”.

The Media – Microbicide Friend or Foe? - IRMA
Irma Lagomarsino - California Biodiversity Council
IRMA 2012 prospectus - Escales-Verlag
Irma Arguello - FMWG
Go tell it on Table Mountain - rectal microbicide advocacy ... - IRMA
IRMA Survey on Lubes Used for Anal Sex: Preliminary Results
IRMA – Brussels Mobility analysis tools - EasyWay ITS
Risques Infos n°29 - IRMa - Institut des risques majeurs
STK-2032 - Franklin Electronic Publishers, Inc.
Canon FAXPHONE L100 - FAXPHONE L100 Basic Operation Guide
Amstrad® -
Treasures ©2011 Correlation -
Owner's Manual (V-Piano_OM.pdf) - Roland
Canon imageCLASS D530 - imageCLASS D530 Basic Operation Guide