TIMBER Pro - Dlubal Software

6 Printout
6. Printout
6.1 Printout Report
Similar to RSTAB, the program generates a printout report for the TIMBER Pro results that
can be completed by graphics and descriptions. In the report you can also decide which input
and output tables appear in the printout.
The printout report is described in detail in the RSTAB manual. In particular, chapter
10.1.3.4 Selecting Data of Add-on Modules on page 227 provides information concerning
the selection of input and output data in add-on modules.
For complex structures with a high number of design cases, it is recommended to split the
data into several small printout reports which allows for a clearly-arranged printout and a
faster work.
6.2 TIMBER Pro Graphic Printout
Every picture that is displayed in the graphic window of the main program RSTAB can be included
in the printout report. This means that the design ratios displayed in the RSTAB
model can be prepared for the printout, too. The graphics can be integrated in the global
printout report or sent directly to the printer. Printing graphics is described in detail in the
RSTAB manual, chapter 10.2.
Designs in the RSTAB model
To print the TIMBER Pro graphic currently displayed in the RSTAB work window,
select Print on the File menu
or use the toolbar button shown on the left.
Figure 6.1: Button Print in the toolbar of the main window
Result diagrams
In the same way, you can integrate the result diagrams of members into the report by using
the [Print] button. It is also possible, to print them directly.
Figure 6.2: Button Print in the toolbar of the Result Diagram window
The following dialog box opens:
52
Program TIMBER Pro © 2011 Ing. Software Dlubal