Emergency Lighting Fire Detection - WF Senate
Emergency
Lighting
Fire Detection
Bulkheads 72
Decorative / Utility 73-74
Exit Signs 74
Twin Beams 75
Conversion Kits & LED Emegency 76
Fire - Alarms Domestic 77
For a wider range of products and technical advice
please refer to the Citadel Plus Catalogue or visit
www.senate.co.uk
Fire Alarms - Commercial 78-79
Fire Alarm Common Accessories 79-81
Fire Alarms Analogue Addressable 80
Power Supplies 82
Batteries 83
Guide To Emergency Lighting 84
& Domestic Smoke Alarms
71
EMERGENCY LIGHTING & FIRE DETECTION
SELF CONTAINED BULKHEADS
72
EL-JRL8/3NM
Emergency Lighting & Fire Detection
8W Bulkheads
Removable gear for easy fixing.
ABS body with snap-on polycarbonate diffuser.
Shallow profile.
IP65.
1 year guarantee.
Description Dimensions (mm)
L x W x D
Part No.
8W IP65 Non-Maintained Bulkhead 353x96x75 SEM83NM
8W IP65 Maintained Bulkhead 353x96x75 SEM83M
Recessing Kit to Suit SEM8RECKIT
Self Adhesive Legend SEM83LEGEND
Rapidlite
SEM83NM
Time saving first fix base and plug in gear tray.
High performance.
Vandal resistant.
IP65.
1 year guarantee.
Description Dimensions (mm)
L x W x D
Part No.
3hr 8W Non-Maintained Bulkhead 330x135x80 EL-JRL8/3NM
3hr 8W Maintained Bulkhead 330x135x80 EL-JRL8/3M
Self Adhesive Legend EL-LEXSABL
SELF CONTAINED BULKHEADS
Waylux
EL-WL8/3NM
Very low profile - only 55mm deep
Light optimised diffuser.
Ideal for low ceilings.
IP42.
Slim Body.
Description Dimensions (mm)
L x W x D
Part No.
3hr 8W Non-Maintained 360x193x55 EL-WL8/3NM
3hr 8W Maintained 360x193x55 EL-WL8/3M
Self Adhesive Legend EL-WL/LEG
Refer to page 83 for replacement batteries
This information is now available as a download
Emergency Lighting & Fire Detection
EL-FL8/3NM
EL-JSQ28/3NM
Flushlite
DECORATIVE & UTILITY SELF CONTAINED LUMINAIRES
Fully recessed.
Winged feature for ceiling tile mount.
Use as stand alone luminaire or as recessed
exit light.
IP20.
Description
Luminaires
3hr 8W Non-maintained
Dimensions (mm)
L x W x D
Part No.
Recessed Body
3hr 8W Non-maintained
407x165x65 EL-FL8/3NM
Recessed Body 407x165x65 EL-FL8/3M
Diffusers
Standard Diffuser EL-FL/DIF
Standard Diffuser with Slot
for Edge Lit Legend EL-FL/SDIF
Legends
Edge Lit Legend
(Running Man / Door / Arrow Right) EL-FL/LEG/R
Edge Lit Legend
(Running Man / Door / Arrow Left) EL-FL/LEG/L
Edge Lit Legend
(Running Man / Door / Arrow Down) EL-FL/LEG/D
Squarelite
Low profile 2D 28W low energy.
Easy to install.
Matching mains luminaire.
IP20.
Description Dimensions (mm)
L x W x D
Part No.
3hr 28W Non-Maintained 260x260x90 EL-JSQ28/3NM
3hr 28W Maintained 260x260x90 EL-JSQ28/3M
28W Mains 260x260x90 EL-JSQ28/2DF
EL-JCL28/3NM
EL-SOLP/28/3M
Circulite
www.senate.co.uk
Low profile 2D16W or 28W low energy.
Easy to install.
Matching mains luminaire.
IP20.
Description Diameter
+ Depth mm
Part No.
3hr 28W Non-Maintained 285 Ø x 100 EL-JCL28/3NM
3hr 28W Maintained 285 Ø x 100 EL-JCL28/3/M
28W Mains 285 Ø x 100 EL-JCL28/2D
3hr 16W Non-Maintained 285 Ø x 100 EL-JCL16/3NM
3hr 16W Maintained 285 Ø x 100 EL-JCL16/3M
16W Mains 285 Ø x 100 EL-JCL16/2D
Solar Plus
EL-SOLP/TRIM/W
EL-SOLP/TRIM/G
Choice of decorative trims.
High frequency control gear.
Easy installation features.
Optional trim colours and semi recess kit.
IP20.
Description
Luminaires
Diameter
+ Depth mm
Part No.
3 hr 28W Maintained 350 Ø x 118 EL-SOLP/28/3M
28W Mains 350 Ø x 118 EL-SOLP/28/2D
Accessories
Dec. Angled Trim (White) 426 Ø EL-SOLP/TRIM/W
Dec. Angled Trim (Gold) 426 Ø EL-SOLP/TRIM/G
Dec. Angled Trim (Silver) 426 Ø EL-SOLP/TRIM/S
Dec. Angled Trim (Black) 426 Ø EL-SOLP/TRIM/B
Semi-Recess Kit 426 Ø EL-SOLP/SRK
73
DECORATIVE & UTILITY SELF CONTAINED LUMINAIRES
DECORATIVE & UTILITY SELF CONTAINED LUMINAIRES + EXIT BOXES
74
EL-VIB28/3M
Viola
Emergency Lighting & Fire Detection
DECORATIVE & UTILITY SELF CONTAINED LUMINAIRES + EXIT BOXES
Opal diffuser, brass gallery.
Ideal in prestigious surroundings.
IP20.
Description Diameter
+ Depth mm
Part No.
3hr 28W Maintained Brass 389 Ø x 178 EL-VIB28/3M
8W Mains Brass 389 Ø x 178 EL-VIB28/2D
Robolite 2
Vandal resistant.
Heavy duty construction.
IP65.
2 year guarantee.
Description Dimensions (mm)
L x W x D
Part No.
3hr 8W Non-Maintained 400x140x100 EL-ROB8/3NM
3hr 8W Maintained 400x140x100 EL-ROB8/3M
8W Mains 400x140x100 EL-ROB8/230
Self Adhesive Legend EL-ROBLEG
Exit Box
Icel approval.
30 metre viewing distance.
Generous downlight panel.
2 year guarantee.
Supplied with legend.
IP20.
EL-ROB8/3NM
SEMEX83NM+
Description Dimensions (mm)
L x W x D
Part No.
3 hr 8W Non-Maintained 483x236x64 SEMEX83NM+
3 hr 8W Maintained 483x236x64 SEMEX83M+
EL-JSNV2/8/3NM
Inovalite
Connect with the Best
Unique dual function downlight and exit sign.
Vandal resistant.
Supplied with legend.
IP20.
Description Dimensions (mm) Part No.
L x W x D
3hr 8W Non-Maintained 380x180x75 EL-JSNV2/8/3NM
3hr 8W Maintained 380x180x75 EL-JSNV2/8/3M
Edgelite
EL-EDG8/3NM/B
Ceiling or wall mounted.
Brass / stainless / white finishes.
Ideal for prestigious applications.
IP20.
Support pod dimensions: 358 x 42 x 61mm.
EL-EDG8/3NM/W
Description Dimensions (mm)
L x W x D
Part No.
Luminaires - Exit Lights
3hr 8W Non-Maintained
(Stainless Steel) 358x300x61 EL-EDG8/3NM/S
3hr 8W Non-Maintained (Brass) 358x300x61 EL-EDG8/3NM/B
3hr 8W Non-Maintained (White) 358x300x61
3hr 8W Maintained
EL-EDG8/3NM/W
(Stainless Steel) 358x300x61 EL-EDG8/3M/S
3hr 8W Maintained (Brass) 358x300x61 EL-EDG8/3M/B
3hr 8W Maintained (White) 358x300x61 EL-EDG8/3M/W
Single Sided Legends
Edge Lit Legend (Running
Man / Door / Arrow Left)
Edge Lit Legend (Running
358x180 EL-EDG/LEG/L
Man / Door / Arrow Right)
Edge Lit Legend (Running
358x180 EL-EDG/LEG/R
Man / Door / Arrow Down) 358x180 EL-EDG/LEG/D
Single Sided Legends
Edge Lit Legend (Running
Man / Door / Arrow Down)
Edge Lit Legend (Running
358x180 EL-EDG/LEG/DS1
Man / Door / Arrow Left / Right)
Edge Lit Legend (Running
358x180 EL-EDG/LEG/DS2
Man / Door / Arrow Up) 358x180 EL-EDG/LEG/DS3
Emergency Lighting & Fire Detection
SEM18TB
Double Beam (2 x 18W)
2 x 18W beam projector.
Access via hinged front door.
Adjustable heads.
3hr duration.
IP20.
TWIN BEAMS
Description Dimensions (mm) Part No.
L x W x D
3hr 8W Non-Maintained 2 x 18W 360x355x80 SEM18TB
Overall height includes heads
Double Beam (2 x 18W)
Time Delay
EL-DB/2X18TD
2 x 18W.
Time delay facility for use where discharge lighting
is installed.
Allows mains fittings to reach optimum light level.
Adjustable heads.
3hr duration.
IP20.
2 year guarantee.
Description Dimensions (mm) Part No.
L x W x D
3hr 8W Non-Maintained 2 x 18W
(C/W Time Delay/Over-Run Timer) 260x358x99 EL-DB/2X18TD
EL-DB/2X55
EL-DB/2X20IP
Double Beam (2 x 55W)
Powerful 2 x 55W lamps.
Adjustable heads.
Easy installation.
Removable front cover.
IP20.
2 year guarantee.
Description Dimensions (mm) Part No.
L x W x D
1hr Non-Maintained 2 x 55W 343x320x135 EL-DB/2X55
Double Beam (External)
Remote lamp heads.
Choice of 20W or 55W lamps.
Easy installation.
Remote multi-directional heads with brackets.
IP65.
2 year guarantee.
Description Dimensions (mm)
L x W x D
Part No.
3hr Non-Maintained 2 x 20W 280x280x130 EL-DB/2X20IP
1hr Non-Maintained 2 x 55W 280x280x130 EL-DB/2X55IP
Overall height includes heads
Best for just about everything electrical
75
TWIN BEAMS
BOXED CONVERSION KITS & LED EMERGENCY
76
EL-CON/LV/TH/B
EL-CON/FL3C
Emergency Lighting & Fire Detection
Boxed Conversion Units
(Fluorescent)
Fully wired.
Suitable for most electronic ballasts.
Will convert 4 pin CFL and 2D lamps.
Description Dimensions (mm)
L x W x D
Part No.
3.6V 3 Cell Conversions 330x94x44 EL-CON/FL3C
4.6V 4 Cell Conversions 330x94x44 EL-CON/FL4C
6.0V 5 Cell Conversions 370x94x44 EL-CON/FL5C
Compact 3.6V 3 Cell Conv. 330x94x44 EL-CON/CFL3C
Boxed Conversion Units
(Low Voltage)
Suitable for 20w, 35w & 50w lamps.
3 hour duration.
Suitable for maintained & non maintained
applications.
Maintained applications require the addition
of external transformers.
Description Dimensions (mm) Part No.
L x W x D
Boxed LV Emergency Pack 254x215x88 EL-CON/LV/TH/B
Needlepack Conversion
(Low Voltage)
Slimline style to fit through 70mm aperture.
Suppled with 1 hour intumescent sleeve.
Suitable for maintained and non-maintaned
applications.
Maintained applications require the addition
of external transformers.
Description Dimensions (mm) Part No.
L x W x D
Low Voltage Emergency Pack EL-CON/LV/TH/S
Charger 247x53x40
Battery 450x50x71
BOXED CONVERSION KITS & LED EMERGENCY
EL-CON/LV/TH/S
CONVERSION SERVICE
We offer a full emergency conversion
service on many luminaires.
All conversions are tested and approved.
5 year guarantee.
Ask at your local branch for details.
LED Emergency
EL-LED/1NM/S
Compact design with high efficiency LED light source.
High quality plug & play emergency LED downlights.
Simple and quick installation.
100-110 emergency lumens.
Economical and discreet.
Almost zero maintenance.
choice of colour finishes.
3 hour emergency duration.
50,000+ hours lamp life.
Dimensions: (Dia.)50mm x (Cut Out)41mm.
Description Finish Part No.
1W Non Maintained Kit White EL-LED/1NM/W
1W Non Maintained Kit Silver EL-LED/1NM/S
Please refer to the Citadel Plus catalogue (page 13)
for guidance on selecting the best conversion kit
for your project.
This information is now available as a download
Emergency Lighting & Fire Detection
SD3 PLUS
SMPR
FIRE ALARMS - DOMESTIC/ANCILLIARIES
Conforms with BS5446-1:2000 where applicable
Battery Operated
Low battery warning.
Test button.
Battery & fixings included.
5 year guarantee.
Description Part No.
9V Battery - Ionisation Smoke Alarm SD1M
9V Battery - Heat Alarm SD1H
Mains Operated
(Battery Backup)
Interconnect up to 12 alarms.
Test button / pause button.
LED indicators.
Low battery indicator.
Push fit connector.
Description Part No.
240V Ionisation Smoke Alarm SD3 PLUS
240V Optical Smoke Alarm SD12
240V Heat Alarm SD10
Mains (Capacitor Backup)
Description Part No.
240V Ionisation Smoke Alarm SD4
240V Optical Smoke Alarm SD6
240V Heat Alarm SD11
Mounting Bases
S/FX600
Can be used with all Sector mains alarms.
Relay base provides voltfree changeover contacts
for connection to ancillary equipment.
Description Part No.
Surface Mount Base SMP
Surface Mount Base with Integral c/o Relay SMPR
www.senate.co.uk
SCO850B
Fire Extinguishers
Dry powder.
Supplied with mounting bracket.
Description Part No.
Fire Extinguisher (600g) S/FX600
Fire Extinguisher (950g) S/FX950
Fire Blanket
S/FB
Description Part No.
Fire Blanket 1m x 1m S/FB
Mains Carbon Monoxide
Alarm
BS EN 50291
Power/alarm/fault indicators.
Interconnect up to 18 alarms.
Self testing sensor.
Description Part No.
CO Alarm 230V SCO850MI
Battery Carbon Monoxide
Alarm
Power/alarm/fault indicators.
9V battery operated.
Self testing sensor.
Simple to install.
5 year guarantee (excludes batteries).
Silence and test button
Electrochemical CO sensor.
85db at 3 metres.
Description Part No.
CO Alarm 9V Battery SCO850B
77
FIRE ALARMS - DOMESTIC/ANCILLIARIES
FIRE ALARMS COMMERCIAL - 2 WIRE
78
Emergency Lighting & Fire Detection
FIRE ALARMS COMMERCIAL - 2 WIRE
Twintech 2 Wire Typical Twintech Wiring
Saves up to 40% installation time.
Built in E.O.L. device.
Up to 32 devices per zone.
Auxiliary sounder circuit.
Fully compliant to EN54.
Eliminates disruption of nuisance alarms.
Kits include: 1 x panel, 6 x detector/sounders
2 x callpoint sounders & removal tool.
Requires 2 x 2.1Ah batteries - See page 83
Description Dimensions (mm) Part No.
HxWxD
2-Wire Fire Alarm Kits
2 Zone Kit 245x313x92 FIR-VFPK22SEN
4 Zone Kit 245x313x92 FIR-VFPK24SEN
2-Wire Fire Alarm Panels & Repeaters
2 Zone Panel 245x313x92 FIR-VFP22SEN
4 Zone Panel 245x313x92 FIR-VFP24SEN
8 Zone Panel 245x313x92 FIR-VFP28SEN
16 Zone Repeater 245x313x92 FIR-VFPREP16
8 Zone Repeater 245x313x92 FIR-VFPREP8
2-Wire Fire Alarm Panels (Houses multiple occupancy)
2 Zone 2-Wire Panel (Plus) 245x313x92 FIR-VFP32SEN
4 Zone 2-Wire Panel (Plus) 245x313x92 FIR-VFP34SEN
8 Zone 2-Wire Panel (Plus) 245x313x92 FIR-VFP38SEN
2-Wire Fire Alarm Accessories
Call Point FIR-VF121SEN
Call Point (IP65) FIR-VF121IPSEN
Call Point & Sounder FIR-VF122SEN
Call Point & Sounder (IP65) FIR-VF122IPSEN
Spare Keys for Call Point 5pk FIR-VF120SEN
Detector FIR-VF721SEN
Detector / Sounder FIR-VF722SEN
Detector Base (for mini trunking) FIR-VF720SEN
Sounder (Red) FIR-VF322SEN
Sounder (White) FIR-VF323SEN
Sounder Square (Red) FIR-VF422SEN
Sounder Square (White) FIR-VF423SEN
Sounder Square (IP55) FIR-VF424SEN
Sounder Beacon 1 (Red) FIR-VF327SEN
Sounder Beacon 2 (Red) FIR-VF328SEN
Beacon (Red IP55) FIR-VF329SEN
Industrial Horn FIR-VF321SEN
Output Relay FIR-VF500SEN
Head Removal Tool FIR-VFTOOL
Connect with the Best
Please consult your local Systems Engineer for
further advice and assistance with system design
Please refer to Citadel Plus Catalogue for further information.
Emergency Lighting & Fire Detection
FIRE ALARMS COMMERCIAL - CONVENTIONAL & ACCESSORIES
FIR-CB2001/03
Conform with BS5839: Pt 4 where applicable
Fire Alarm Conventional
4 alarm circuits standard on 4 & 8 zone units.
Surface or semi flush mount as standard.
Easy test facility.
Requires 2 x 2.1Ah batteries.
EN54 compliant.
Description Dimensions (mm) Part No.
L x W x D
Conventional & Repeater Panels
Precept Panels
Meets EN54-2 & EN54.4.
Comprehensive user facility.
Requires batteries (not supplied):
2, 4, 8 & 16 zone: 2 x 7Ah, 32 zone: 2 x 12Ah
One man test facility.
Description Dimensions (mm) Part No.
L x W x D
Conventional Panels
2 Zone Control Panel 370x325x126 FIR-PREC2EN
4 Zone Control Panel 370x325x126 FIR-PREC4EN
8 Zone Control Panel 370x325x126 FIR-PREC8EN
16 Zone Control Panel 370x325x126 FIR-PREC16EN
32 Zone Control Panel 441x400x131 FIR-PREC32EN
Conventional Repeater Panels
8 Zone Repeater Panel 370x325x126 FIR-2605/115
16 Zone Repeater Panel 370x325x126 FIR-2605/116
32 Zone Repeater Panel 441x400x131 FIR-2605/117
Repeater Panel Driver Card FIR-2605/061
EN54 Conventional Repeater Panels
8 Zone Repeater Panel
(with integral PSU) 370x325x126 FIR-2605/110
16 Zone Repeater Panel
(with integral PSU) 370x325x126 FIR-2605/111
32 Zone Repeater Panel
(with integral PSU) 441x400x131 FIR-2605/112
Semi Flush Bezel (for Precept Panel)
Semi Flush Bezel 370x325x126 FIR-2603/011
Semi Flush Bezel 441x400x131 FIR-2603/012
FIR-PREC2EN
1 Zone Control Panel 313x245x92 FIR-CB2001/03
2 Zone Control Panel 313x245x92 FIR-CB2002/03
4 Zone Control Panel 313x245x92 FIR-CB2004/03
8 Zone Control Panel
Repeater Panel
313x245x92 FIR-CB2008/03
(with integral PSU) 313x245x92 FIR-2500/967
Repeater Panel 313x245x92 FIR-2500/968
Smoke & Heat Detectors
Wide operating voltage.
Proven performance.
Description
Smoke & Heat Detectors
Part No.
Optical Smoke Detector 55000-317APO
Ionisation Smoke Detector 55000-217APO
Integrating Ionisation Smoke Detector 55000-220APO
Heat Detector Rate Of Rise A1R (57° C) 55000-122APO
Heat Detector Rate Of Rise BR (75° C) 55000-127APO
Heat Detector Rate Of Rise CR (90° C) 55000-132APO
Heat Detector Static CS (90° C)
Detector Bases
55000-137APO
Standard Detector Base with Diode 45681-201APO
Standard Relay Base
Mounting
45681-245APO
Conduit Box 45681-204APO
Detector Ceiling Tile Mounting Box 45681-309APO
Sounder Ceiling Tile Mounting Box
Detector Bases & Sounders
45681-310APO
Sounder Base with Diode 45681-513APO
125ml Tester Aerosol FIR-AER300/001
Call Points
Available in yellow, white, blue & green.
A universal manual unit.
470 ohm or 680 ohm available.
Description
Internal Break Glass Call Point
Part No.
Universal Surface Manual Call Point (Red) CXLGPRBB470680
Hinged Cover (Pack of 10) CXPC
Spare Keys (Pack of 10) CXSPARE KEY
Resettable Plastic Element (Conversion Kit) CXPKIT
Spare Glass (Pack 10) CXSPARE GLASS
External Break Glass Call Point
Surface Manual Call Point IP66 (Red) CXLGPR470680IP
Best for just about everything electrical
79
FIRE ALARMS COMMERCIAL - CONVENTIONAL & ACCESSORIES
FIRE ALARMS COMMERCIAL - ANALOGUE ADDRESSABLE
80
Emergency Lighting & Fire Detection
Voyager Analogue
Addressable
FIRE ALARMS COMMERCIAL - ANALOGUE ADDRESSABLE
FIR-VOYAGER1
Requires 2 x 12Ah batteries.
Complies with EN54.
User friendly controls.
A fully networkable system.
We advise that a design/survey is carried out
before any installation.
Description Dimensions (mm)
L x W x D
Part No.
EN54 Analogue Addressable Fire Alarm Panels
1 Loop Control Panel
(with zonal LED’s)
2 Loop Control Panel
370x325x126 FIR-VOYAGER1
(with zonal LED’s) 370x325x126 FIR-VOYAGER2
Semi Flush Bezel (for Voyager Panel)
Semi Flush Bezel FIR-2603/011
We advise battery standby calculations are carried out for each
individual project to ensure that the battery size is sufficient to
provide a standby period in line with the requirements set out in BS5839.
In some cases this may result in the need for a remote
battery enclosure.
Please consult your local Systems Engineer for further advice.
Smoke/Heat Detectors &
Accessories
Digital protocol for reliability.
Elegant & unobtrusive.
Wide compatibility.
Automatic addressing with patented xpert card.
Description Part No.
Smoke & Heat Detector
Optical Smoke Detector (XP95) 55000-600APO
Ionisation Smoke Detector (XP95) 55000-500APO
Heat Detector (55° C) 55000-400APO
Heat Detector - Hi Temp (90°C) 55000-401APO
Multi Sensor 55000-885APO
Smoke/Heat Detectors &
Accessories (continued)
Description Part No.
Detector Bases
XP95 Detector Base 45681-210APO
XP95 Isolating Detector Base 45681-321APO
Mounting Bases
Conduit Box 45681-204APO
Detector Ceiling Tile Mounting Box 45681-309APO
Sounder Ceiling Tile Mounting Box 45681-310APO
XP95 Loop Isolator & Base
XP95 Isolator(Base Required) 55000-720APO
XP95 Base For Isolator 45681-211APO
XP95 Manual Call Points
XP95 Surface Mount Manual
Call Point With Isolator 55100-908APO
XP95 Surface Mount Manual Call
Point With Isolator (External IP65) 58100-951APO
XP95 External Loop Powered Sounders & Beacons
XP95 External 100dB Loop Powered Sounder (Red) 55000-274APO
XP95 External 100dB Loop
Powered Sounder (White) 55000-275APO
XP95 External Loop Powered
Sounder Beacon with Isolator (Red) 55000-298APO
XP95 External Loop Powered
Sounder Beacon with Isolator (White) 55000-299APO
XP95 Bases, Beacons & Sounders
XP95 Integrated Loop Powered Base Sounder 45681-278APO
XP95 Integrated Loop Powered
Base Sounder with Isolator 45681-277APO
XP95 Integrated Loop Powered
Sounder Beacon Base 45681-331APO
XP95 Integrated Loop Powered
Sounder Beacon Base with Isolator 45681-330APO
White Cap for Integrated Base Sounder 45681-292APO
Red Cap for Integrated Base Sounder 45681-293APO
XP95 Accessories
XP95 Input / Output Unit with Isolator 55000-847APO
XP95 Output Unit with Isolator 55000-849APO
XP95 Sounder Control Unit with Isolator 55000-852APO
Blank XPERT Card (1) 38531-771
Pre-Addressed XPERT Cards 1 - 126 (126) 45682-127APO
This information is now available as a download
Emergency Lighting & Fire Detection
FIRE ALARMS - COMMON ACCESSORIES
Electronic Sounders Bells
High output.
Low current comsumption.
Volume control.
Shallow base IP54 - Deep base IP65.
Roshni
ROLP/R/S
Description Part No.
Sounder Shallow Base (Red) ROLP/R/S
Sounder Deep Base (Red) ROLP/R/D
Sounder U Base (Red) ROLP/R/U
Sounder Shallow Base (White) ROLP/W/S
Sounder Deep Base (White) ROLP/W/D
Sounder U Base (White) ROLP/W/U
Squashni
IP54 rated.
Volume control.
Low current consumption.
Askari Compact
IP54 rated.
High sound output.
Description Part No.
Sounder Surface (Red) AC/R/BB
Sounder Flush (Red) AC/R/3
Sounder Surface (White) AC/W/BB
Sounder Flush (White) AC/W/3
Symphoni
SQ/W/3
IP42 - IP66 rated.
High sound output - Up to 120db.
Volume control.
Automatic synchronisation.
AC/R/BB
Description Part No.
Electronic Platform Sounder (White) SQ/W/3
Electronic Platform Sounder (Red) SQ/R/3
White Cover Plate For Squashni SQ/COVER/W
Red Cover Plate For Squashni SQ/COVER/R
SY/R
Description Part No.
Internal Open Area Electronic Sounder (Red) SY/R
Internal Open Area Electronic Sounder (White) SY/W
External Open Area Electronic Sounder - (Red) SYHO/R/IP
External Open Area Electronic Sounder - (White) SYHO/W/IP
Internal Open Area Electronic Sounder (Red) SYHO/R
Internal Open Area Electronic Sounder (White) SYHO/W
Internal Open Area Electronic Sounder/Beacon (Red) SYAV/RL/R
Internal Open Area Electronic Sounder/Beacon (White) SYAV/CL/W
SYHO/R/IP
www.senate.co.uk
ROLP/SB/RL/RS
REM/C/B
High output.
Low current comsumption.
Simple installation.
Description Part No.
Internal Motorised
24V dc 6" Motorised Bell (Red) CFB6D24
Internal Solenoid
24V dc 6" Electronic Solenoid Bell (Red) FB/24/RED
External Solenoid
24V dc 6" Electronic Solenoid Bell (Red) FB/24/RED/WP
Solista Sounder/Beacon
LED technology.
Low profile.
Sounder and beacon in one unit.
CFB6D24
Description
Electronic Sounder Beacon
Part No.
Sounder Beacon Shallow Base (Red) ROLP/SB/RL/RS
Sounder Beacon Deep Base (Red) ROLP/SB/RL/RD
Sounder Beacon Shallow Base (White) ROLP/SB/RL/WS
Sounder Beacon Deep Base (White) ROLP/SB/RL/WD
Remote Indicators and Relays
1 gang size.
Ideal for locations where detector is concealed.
Description Part No.
Remote LED Indicator BF318
Relay on Plate 24v 5A BF376
BF318
Remote LED Indicator REM/C
Remote LED Indicator & Buzzer REM/C/B
81
FIRE ALARMS - COMMON ACCESSOIRES
FIRE ALARMS COMMERCIAL, POWER SUPPLIES AND DOOR RETAINERS
82
Emergency Lighting & Fire Detection
FIRE ALARMS COMMERCIAL, POWER SUPPLIES AND DOOR RETAINERS
FIR-2401MPL
FIR-2402TR
Maintained Power Supplies
27.6V dc regulated output.
Full current to load.
Fault LED.
Battery current limiting protection circuit.
Mains transient protector.
Short circuit protection.
Lid tamper.
Mains fail relay.
Fuse blown and battery missing alarm.
Description Dimensions (mm)
H x W x D
Part No.
24V 1A Power Supply Unit 330x330x80 FIR-2401MPL
24V 2A Power Supply Unit 330x330x80 FIR-2402MPL
24V 3A Power Supply Unit 330x330x80 FIR-2403MPL
24V 5A Power Supply Unit 330x330x80 FIR-2405MPL
Transformer Rectifier
Ideal for powering fire door hold open magnets,
which will be released on activation of the fire alarm.
22-30V dc non regulated output.
Mains present LED indicator.
Fault LED indicator.
Full current to load.
Mains transient protector.
Short circuit protection.
Description Dimensions (mm)
H x W x D
Part No.
Transformer Rectifiers 24V 2A 250x215x80 FIR-2402TR
Transformer Rectifiers 24V 4A 250x215x80 FIR-2404TR
FSMD/024/40W
Door Retainers
Connect with the Best
FSMD/230/40W
Suits wide range of applications.
Enables doors to be held open under normal
conditions.
Automatic release in the event of a fire alarm.
Description Part No.
24Vdc Magnetic Door Retainer FSMD/024/40W
230Vac Magnetic Door Retainer FSMD/230/40W
Floor Mounting Bracket for above FLOOR MNT BKT
Dorgard Acoustic
Fire Door Retainer
1328-A01KIT
FLOOR MNT BKT
Installs in under five minutes.
Improves access for wheelchair users
in line with the D.D.A.
Complies with BS EN 1155 and accepted
by the Fire Brigade.
Automatically releases fire doors when
.the fire alarm sounds
Automatic night-time release facility.
Complies with BS 7273-4 category C
Available in Red, Black, White and
Mahogony finishes.
Description Part No.
Fire Door Retainer Kit (Red) 1328-A01KIT
Emergency Lighting & Fire Detection
BATTERIES
Sealed Lead Acid Batteries Replacement Batteries
(High Temp Ni-Cad)
Description
NP
Part No.
1.2AH 12V FIR-NP1.2-12
2.1AH 12V FIR-NP2.1-12
2.3AH 12V FIR-NP2.3-12
2.8AH 12V FIR-NP2.8-12
3.2AH 12V FIR-NP3.2-12
4AH 12V FIR-NP4-12
7AH 12V FIR-NP7-12
12AH 12V FIR-NP12-12
17AH 12V FIR-NP17-12
24AH 12V FIR-NP24-12
38AH 12V FIR-NP38-12
Cyclic
17AH 12V FIR-NPC17-12
24AH 12V FIR-NPC24-12
38AH 12V FIR-NPC38-12
EN60285 compliant.
Suitable for most emergency luminaires.
Description Part No.
Single Cell Tagged EL-4000DHB*
2 Cell Stick Tagged EL-2/4000DH4*
3 Cell Stick Tagged EL-3/4000DH4*
4 Cell Stick Tagged EL-4/4000DH4*
2 Cell Side by Side Tagged EL-2/4000DH3*
3 Cell Side by Side Tagged EL-3/4000DH3*
6V 12Ah Battery FIR-NP12-6
*Add suffix ‘F’ for flying leads
Best for just about everything electrical
83
BATTERIES
EMERGENCY LIGHTING SPACING TABLE & SMOKE ALARM GUIDE
84
Emergency Lighting & Fire Detection
SPACING TABLE & SMOKE ALARM GUIDE
Spacing Table - Emergency Lighting
Luminaire
Model &
Part No.
Mounting
Height
in metres
Transverse
distance
to wall in
metres
Emergency Escape Routes
Transverse to
transverse in
metres
Axial distance
to wall in
metres
Domestic Smoke Alarm Guide
Axial to axial
spacing in
metres
Anti Panic Open Areas 0.5 Lux Minimum
Transverse
distance
to wall in
metres
Transverse to
transverse in
metres
Axial distance
to wall in
metres
This information is now available as a download
Axial to axial
spacing in
metres
SECTOR BULKHEAD 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.5 LUX 0.5 LUX 0.5 LUX 0.5 LUX
SEM83NM 2.5m 4.2 11.6 3.4 8.3 1.8 7.2 0.9 5.6
RAPIDLITE 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.5 LUX 0.5 LUX 0.5 LUX 0.5 LUX
EL-JRL8/3NM 2.5 5.4 1.6 12.9 7.4 3.0 1.3 7.3 4.3 2.5 9.1 1.4 5.3
ROBOLITE 2 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.5 LUX 0.5 LUX 0.5 LUX 0.5 LUX
EL-ROB8/3NM 2.5 3.5 1.1 8.2 4.4 3.0 0.9 7.8 3.8 2.6 7.2 2.3 6.1
EL-ROB8/3M 2.5 3.5 1.1 8.2 4.4 3.0 0.9 7.8 3.8 2.6 7.2 2.3 6.1
SQUARELITE 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.5 LUX 0.5 LUX 0.5 LUX 0.5 LUX
EL-JSQ28/3NM 2.5 4.2 2.1 10.4 6.0 4.2 2.1 10.4 6 2.1 7.0 2.1 7.0
EL-JSQ28/3M 2.5 4.0 1.9 10.0 5.6 4.0 1.9 10 5.6 1.9 6.7 1.9 6.7
CIRCULITE 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.5 LUX 0.5 LUX 0.5 LUX 0.5 LUX
EL-JCL28/3NM 2.5 4.2 2.1 10.4 6.0 4.2 2.1 10.4 6.0 2.1 7.0 2.1 7.0
EL-JCL28/3M 2.5 4.0 1.9 10.0 5.6 4.0 1.9 10.0 5.6 1.9 6.7 1.9 6.7
EL-JCL16/3NM 2.5 3.5 1.5 9.0 4.8 3.5 1.5 9.0 4.8 1.6 5.6 1.6 5.6
EL-JCL16/3M 2.5 4.4 2.3 11.1 6.3 4.4 2.3 11.1 6.3 2.1 7.2 2.1 7.2
SOLAR-PLUS 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.5 LUX 0.5 LUX 0.5 LUX 0.5 LUX
EL-SOLP/28/3M 2.5 - - 11.0 6.3 - - - - - - - -
VIOLA 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.5 LUX 0.5 LUX 0.5 LUX 0.5 LUX
EL-VIB28/3M 2.5 - - 10.1 5.9 - - - - - - - -
NEW FLUSHLITE 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.5 LUX 0.5 LUX 0.5 LUX 0.5 LUX
EL-FL8/3NM 2.5 3.7 2.7 9.5 7.8 3.3 1.4 8.3 4.5 5.6 13.6 3.4 8.4
EL-FL8/3M 2.5 3.7 2.7 9.5 7.8 3.3 1.4 8.3 4.5 5.6 13.6 3.4 8.4
WAYLUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.2 LUX 1 LUX 0.5 LUX 0.5 LUX 0.5 LUX 0.5 LUX
EL-WL8/3NM 2.5 - 1.9 - 6.0 - 1.5 - 4.5 3.0 7.9 2.2 5.9
EL-WL8/3M 2.5 - 1.9 - 6.0 - 1.5 - 4.5 3.0 7.9 2.2 5.9
Please refer to Citadel Plus for further information
Change language