Planicrete AC Planicrete AC - Northland Construction Supplies
Planicrete AC Planicrete AC - Northland Construction Supplies
Planicrete AC Planicrete AC - Northland Construction Supplies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Planicrete</strong> ®<br />
<strong>AC</strong><br />
On walls<br />
1. Read all installation instructions thoroughly before<br />
installation.<br />
2. Before the application of the mortar mix, apply a slurry<br />
bondcoat of <strong>Planicrete</strong> <strong>AC</strong> onto the properly prepared<br />
surface.<br />
3. While the slurry bond coat is still wet, apply the repair<br />
mortar to the required thickness using a margin trowel.<br />
Work the mortar into the slurry bondcoat to promote a<br />
mechanical bond to the substrate. Do not spread mortar<br />
on a dry or partially dry slurry bondcoat because a dry<br />
slurry bond coat will act as a bond breaker.<br />
CURING<br />
1. Protect from excessive heat or draft conditions during<br />
the first 24 to 72 hours of curing. Alternatively use damp<br />
burlap, polyethylene sheeting or water-based curing<br />
compound. Excessive heat and/or wind could cause<br />
premature surface drying and result in cracking. Do not<br />
use solvent-based curing compounds.<br />
2. Cure cement-based mixes modified with <strong>Planicrete</strong><br />
<strong>AC</strong> for at least 5 to 7 days at 73°F (23°C) before total<br />
immersion (ponds, pools, planter walls, cisterns, water<br />
tanks, etc.).<br />
CLEANUP<br />
• Wash hands and tools promptly with water before<br />
material hardens. Cured material must be mechanically<br />
removed.<br />
Refer to MAPEI’s MSDS for specific data related to VOCs,<br />
health and safety, and handling of product.<br />
Statement of<br />
Responsibility<br />
Before using, user shall determine the suitability of the<br />
product for its intended use and user alone assumes all<br />
risks and liability whatsoever in connection therewith. Any<br />
claim shall be deemed waived unless made in<br />
writing to us within fifteen (15) days from<br />
date it was, or reasonably should have been,<br />
discovered.<br />
We proudly support the following industry organizations:<br />
MAPEI Headquarters of the Americas<br />
1144 East Newport Center Drive<br />
Deerfield Beach, Florida 33442<br />
Phone: 1-888-US-MAPEI<br />
(1-888-876-2734)<br />
Technical Services<br />
1-800-992-6273 (U.S. and Puerto Rico)<br />
1-800-361-9309 (Canada)<br />
Customer Service<br />
1-800-42-MAPEI (1-800-426-2734)<br />
For the most current BEST-B<strong>AC</strong>KED<br />
product data and warranty information,<br />
visit www.mapei.com.<br />
Edition Date: June 16, 2010<br />
PR608 P<strong>AC</strong>D_F10Evp © 2010 MAPEI Corporation.<br />
All Rights Reserved. Printed in the USA.