Chemical Anchor Technical Handbook
Chemical Anchor Technical Handbook
Chemical Anchor Technical Handbook
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Product Details<br />
CF800 <strong>Technical</strong> Information<br />
<strong>Chemical</strong> <strong>Anchor</strong>ing<br />
Product Overview<br />
<strong>Chemical</strong> <strong>Anchor</strong>ing<br />
Theory<br />
Contents<br />
Applications<br />
1. Areas of<br />
Application<br />
2. Benefits<br />
3. Properties<br />
Usage Instructions<br />
CF800<br />
Reaction resin mortar, polyester-based<br />
Concrete / solid stone<br />
Usage<br />
Heavy load-carrying attachments in solid stone, concrete, porous<br />
concrete and light concrete<br />
Suitable for attachment points close to the edge, since chemical<br />
anchoring is free of expansion forces<br />
Also suitable as repair or adhesive mortar for concrete components<br />
Attachment of anchor rods, threaded collars, reinforcement bars, profiles etc.<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Can be used in various solid stones<br />
Cartridge can be used until the expiration date by replacing either the<br />
static mixer or resealing cartridge with the sealing cap<br />
Water-impermeable joint, i.e. no water can penetrate into the hole at<br />
the side of the adhesive compound<br />
Galvanized steel, stainless steel, highly corrosion-resistant steel<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
For use with a special application gun and static mixers<br />
Bending tensile strength mean value of 56 N/mm 2<br />
Compression strength mean value of 108 N/mm 2<br />
Dynamic elasticity module mean value of 1200 N/mm 2<br />
Raw density mean value of 1,61 kg/dm 3<br />
Temperature resistant up to 80°C<br />
Application temperature of the cartridge should be at least 20°C<br />
Storage temperature from 5°C up to a max. of 25°C<br />
Storage life: 12 months<br />
Undersurface: Concrete, solid stone<br />
Product Overview<br />
<strong>Chemical</strong> <strong>Anchor</strong>ing<br />
Contents Applications<br />
Theory<br />
Product Details<br />
Drill hole with percussion drill Clean drill hole (blow out: 4x,<br />
brush out: 4x, blow out: 4x )<br />
Screw mixer to cartridge<br />
Product Details<br />
Squeeze out and discard approx.<br />
10 cm of compound before use<br />
Starting from the back end,<br />
fill hole completely with mortar<br />
Push anchor into base of hole<br />
while turning clockwise<br />
Additional<br />
Information<br />
Visual check of mortar filling Observe hardening time Install component, apply torque<br />
3.2.1<br />
Additional<br />
Information
Change language