Polyethylene Fittings Brochure & Price List - JM Eagle

POLYETHYLENE FITTINGS 

MDPE & HDPE FITTINGS MEET ASTM D2513, D2683, D3261 

MetFit FITTINGS MEET ASTM D2513, F1924 

PRICE LIST 

Building essentials 

for a better tomorrow

Polyethylene 

FITTINGS 

PRICE LIST 

MDPE & HDPE FITTINGS 

MEET ASTM D2513, D2683, D3261 

MetFit FITTINGS 

MEET ASTM D2513, F1924 

Material Designation codes and applicable standards 

All USPoly ® fusion fittings are produced from a resin listed in PPI's (Plastic Pipe Institute) tr-4 listing of 

approved materials.The material designation code for MDPE UAC 2000 fittings is PE 2406/PE 2708, with a 

recommended hydrostatic design basis (HDB) of 1250 PSI @ 73 degrees Fahrenheit. 

The material designation code of HDPE fittings is PE 3408/PE 3608/PE 4710, with a recommended hydrostatic 

design basis (HDB) of 1600 PSI @ 73 degrees Fahrenheit. HDPE fittings also meet the applicable AWWA 

specification and ANSI/NSF 61 potable water requirements. 

All USPoly ® PE fittings meet the requirements of ASTM D-2513. This standard specification is incorporated, by 

reference, in Appendixes A and B of Part 192, Title 49 of the Code of Federal Regulations (CFR), "Transportation 

of Natural and Other Gas by Pipeline: Minimum Safety Standards." Fittings are fusion compatible with most 

all brands of polyethylene pipe and are suitable for use with PPI's generic fusion procedures, TR33 &TR41. 

Additionally, Socket fittings meet requirements of ASTM D-2683 and Butt fittings meet the requirements of 

ASTM D-3261. 

MetFit fittings meet the requirements of ASTM D-2513 and requirements of the plastic mechanical specification, 

F1924. The MetFit pressure rating far exceeds every PE pipe or tubing it can be properly joined to. 

Note: All fittings previously manufactured by USPoly ® are currently produced by JM Eagle .

Polyethylene 

FITTINGS 

Contents 

01 

02 

MDPE fittings (PE 2406/2708) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

SOCKET FUSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

BUTT FUSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 

TAPPING TEE (TYPE II) WithOut SLEEVE . . . . . . . . . . . . . . . . . . . . . . . 7 

HIGH VOLUME TAPPING TEE without SLEEVE . . . . . . . . . . . . . . . . . . . 8 

SERVICE SADDLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 

BRANCH SADDLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 

PROTECTIVE SLEEVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 

SPIGOTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 

HDPE fittings (PE 3408/3608/4710) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 

SOCKET fusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 

butt fusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 

TAPPING TEE (TYPE II) without sleeve . . . . . . . . . . . . . . . . . . . . . . . 21 

high volume tapping tee without sleeve . . . . . . . . . . . . . . . . . . 23 

SERVICE SADDLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 

BRANCH SADDLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 

FLANGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 

SOCKET REDUCER TEES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 

03 METFIT® FITTINGS & tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

01 

MDPE PRICE LIST 

Socket fusion fittings (PE 2406/2708) 

socket fusion cap 

NOMINAL SIZE PRODUCT CODE BOX QTY LIST PRICE 

½" CTS 505063000011 100 2.37 

½" 505084000051 100 2.37 

¾" 505105000081 100 2.60 

1" CTS 505113000081 100 3.18 

1" 505132000081 100 3.47 

1¼" 505166000071 100 3.81 

1½" 505190000081 100 3.81 

2" 505238000081 100 3.93 

3" 505350000081 10 13.87 

4" 505450000081 10 20.50 

socket fusion coupling 


½" CTS 500063063011 100 1.50 

½" 500084084051 100 1.50 

¾" 500105105081 100 1.68 

1" CTS 500113113081 100 2.03 

1" 500132132081 100 1.68 

1¼" 500166166071 100 2.06 

1½" 500190190081 100 2.43 

2" 500238238081 100 2.59 

3" 500350350081 10 16.18 

4" 500450450081 10 23.23 

NOTE: IPS is used throughout this catalog unless CTS is designated. 

2 POLYETHYLENE FITTINGS PRICE LIST



socket fusion REDUCER 


½" X ½" CTS 504084063011 100 5.43 

¾" X ½" CTS 504105063011 100 5.66 

¾" X ½" 504105084051 100 5.66 

1" CTS X ½" CTS 504113063011 100 5.66 

1" X ½" CTS 504132063011 100 5.66 

1" X ½" 504132084051 100 6.01 

1" CTS X ¾" 504113105081 100 6.01 

1" X ¾" 504132105081 100 5.66 

1" X 1" CTS 504132113081 100 5.66 

1¼" X ½" 504166084051 100 8.66 

1¼" X ½" CTS 504166063071 100 8.66 

1¼" X ¾" 504166105071 100 8.66 

1¼" X 1" CTS 504166113071 100 8.66 

1¼" X 1" 504166132071 100 8.66 

1½" X ¾" 504190105081 100 10.40 

1½" X 1-¼" 504190166071 100 10.40 

2" X ¾" 504238105081 100 9.82 

2" X 1" CTS 504238113081 100 9.82 

2" X 1" 504238132081 100 9.82 

2" X 1¼" 504238166071 100 9.82 

2" X 1½" 504238190081 100 10.86 

3" X 2" 504350238081 10 13.30 

4" X 2" 504450238081 10 24.67 

4" X 3" 504450350081 10 27.89 

POLYETHYLENE FITTINGS PRICE LIST 

3



(CONTINUED) 

SOCKET FUSION 90 DEGREE ELBOW 


½" CTS 502063063011 100 3.35 

½" 502084084051 100 3.35 

¾" 502105105081 100 3.47 

1" CTS 502113113081 100 3.81 

1" 502132132081 100 3.81 

1¼" 502166166071 100 4.62 

1-½" 502190190081 100 7.97 

2" 502238238081 10 7.80 

3" 502350350081 4 22.00 

4" 502450450081 4 56.83 

SOCKET FUSION TEE 


½" CTS 503063063011 100 2.89 

½" 503084084051 100 2.89 

¾" 503105105081 100 2.89 

1" CTS 503113113081 100 3.81 

1" 503132132081 100 3.68 

1¼" 503166166071 100 5.15 

1½" 503190190081 100 10.05 

2" 503238238081 10 10.40 

3" 503350350081 4 31.92 

4" 503450450081 4 59.66 



BUTT fusion fittings (PE 2406/2708) 

BUTT FUSION CAP 


1¼" 515166000071 100 3.81 

2" 515238000081 100 4.04 

3" 515350000081 10 10.63 

4" 515450000081 10 18.13 

6" 515663000081 5 45.16 

8" 515863000081 1 110.30 

BUTT FUSION 45 DEGREE ELBOW 


3" 511350350081 4 20.56 

4" 511450450081 4 30.15 

6" 511663663081 2 64.91 

8" 511863863081 1 price upon request 

BUTT FUSION 90 DEGREE ELBOW 


1¼" 512166166071 100 6.70 

2" 512238238081 10 8.78 

3" 512350350081 4 20.56 

4" 512450450081 4 30.15 

6" 512663663081 2 64.91 




5


BUTt fusion fittings (PE 2406/2708) 

(CONTINUED) 

BUTT FUSION REDUCER 


2" X 1" 514238132081 10 8.20 

2" X 1¼" 514238166071 10 8.43 

2" X 1½" 514238190081 10 11.61 

3" X 2" 514350238081 10 12.75 

4" X 2" 514450238081 10 17.90 

4" X 3" 514450350081 10 18.94 

6" X 4" 514663450081 6 45.28 

8" X 6" 514863663081 1 79.93 

BUTT FUSION TEE 


1¼" 513166166071 100 8.09 

2" 513238238081 10 13.40 

3" 513350350081 4 22.82 

4" 513450450081 4 33.21 

6" 513663663081 1 84.32 


Most 6" and 8" butt fused fittings are available with SDR 13.5, 17 and SDR 21 outlets, as well as the standard SDR 11/11.5. 

Contact the JM Eagle sales department for price and delivery. 

Protective sleeves are available. The last number of the Product Code is changed from a 1 to a 5 when a protective sleeve 

is included. Add $0.86 each when sleeves are included for sizes ½" CTS to ¾" IPS. Add $1.44 each for 1" CTS and 1" IPS. 

Add $2.48 each for 1¼" IPS size. 



TAPPING TEE (TYPE II) Without SLEEVE (PE 2406/2708) 

¾" PUNCH: Socket fusion OUTLET 

(SADDLE CONTOUR SIZE X OUTLET SIZE) 


1¼" X ½" 547166084151 10 11.95 

1¼" X ½" CTS 547166063111 10 11.95 

1¼" X ¾" 547166105181 10 11.95 

1¼" X 1" CTS 547166113181 10 13.05 

1¼" X 1" 547166132181 10 13.05 

1¼" X 1¼" 547166166171 10 22.00 

1½" X ½" 547190084151 10 11.95 

1½" X ½" CTS 547190063111 10 11.95 

1½" X ¾" 547190105181 10 11.95 

1½" X 1" CTS 547190113181 10 13.05 

1½" X 1" 547190132181 10 13.05 

1½" X 1¼" 547190166171 10 22.00 

2" X ½" 547238084151 10 11.95 

2" X ½" CTS 547238063111 10 11.95 

2" X ¾" 547238105181 10 11.95 

2" X 1" CTS 547238113181 10 13.05 

2" X 1" 547238132181 10 13.05 

2" X 1¼" 547238166171 10 22.00 

3" X ½" 547350084151 10 11.95 

3" X ½" CTS 547350063111 10 11.95 

3" X ¾" 547350105181 10 11.95 

3" X 1" CTS 547350113181 10 13.05 

3" X 1" 547350132181 10 13.05 

3" X 1¼" 547350166171 10 22.00 

4" X ½" 547450084151 10 11.95 

4" X ½" CTS 547450063111 10 11.95 

4" X ¾" 547450105181 10 11.95 

4" X 1" CTS 547450113181 10 13.05 

4" X 1" 547450132181 10 13.05 

4" X 1¼" 547450166171 10 22.00 

6" X ½" 547663084751 10 11.95 

6" X ½" CTS 547663063711 10 11.95 

6" X ¾" 547663105781 10 11.95 

6" X 1" CTS 547663113781 10 13.05 

6" X 1" 547663132781 10 13.05 

6" X 1¼" 547663166771 10 22.00 

8" X ½" 547863084751 10 11.95 

8" X ½" CTS 547863063711 10 11.95 

8" X ¾" 547863105781 10 11.95 

8" X 1" CTS 547863113781 10 13.05 

8" X 1" 547863132781 10 13.05 

8" X 1¼" 547863166771 10 22.00 


Protective sleeves are available. The last number of the Product Code is changed from a 1 to a 5 when a protective sleeve is 

included. Add $0.86 each when sleeves are included for sizes ½" CTS to ¾" IPS. Add $1.44 each for 1" CTS and 1" IPS. Add 

$2.48 each for 1-¼" IPS size. Additionally, emery cloths and alcohol wipes are available upon request for an additional cost. 


7


HIGH VOLUME TAPPING TEE Without SLEEVE (PE 2406/2708) 

SOCKET outlet 

(2" Main, 1.5" Punch; 3"- 8" Main, 1.8" Punch) 


2" X 1¼" * 50A238166571 5 109.86 

3" X 1¼" * 50A350166671 5 109.86 

4" X 1¼" * 50A450166671 5 109.86 

6" X 1¼" * 50A663166671 5 109.86 

8" X 1¼" * 50A863166671 5 109.86 

* 1¼" socket high volume tap tee outlet outside diameter is not designed to accept 

a socket fusion fitting. 2" butt fusion HVSPT's should be used for this application. 

BUTT outlet 

(2" Main, 1.5" Punch; 3"- 8" Main, 1.8" Punch) 


2" X 2" 51A238238581 5 109.86 

3" X 2" 51A350238681 5 109.86 

4" X 2" 51A450238681 5 109.86 

6" X 2" 51A663238681 5 109.86 

8" X 2" 51A863238681 5 109.86 

Contact the JM Eagle sales department for availability of 2" IPS socket outlet and 

1¼" IPS butt fusion outlet high volume tapping tees. Protective sleeves are available. 

The last number of the Product Code is changed from a 1 to 5 when a protective sleeve 

is included. Add $2.90 each when sleeves are included. 

TAPPING TEE TEST CAPS 


TYPE I 255000000005 1 44.10 

Yellow PE Cap "Aldyl Style" 

TYPE II 255000000002 1 44.10 

PE Cap - Buttress Thread Side "O" Ring 

TYPE II 255000000002 1 44.10 

Yellow PE Cap - Buttress Thread Side "O" Ring 

HIGH VOLUME 255000000008 1 56.70 

QUICK CONNECTOR 713273 1 18.31 

¼" N.P.T. Female x Female Quick Connector 

HOSE ONLY 713274 1 24.99 

" I.D. Hose x 24" with ½" N.P.T. Male Outlets 

HOSE ASSEMBLY 713275 1 43.30 

713273 + 713274 Assembled 



PURGE POINT CAPS 


2" Butt Fusion Purge Point Cap 51C238000081 1 32.34 

1¼" Butt Fusion Purge Point Cap 51C166000071 1 31.76 

SDR 10 

1¼" Butt Fusion Purge Point Cap 51C166000081 1 31.76 

SDR 11 

PURGE / TEST QUICK CONNECTOR 713273 1 20.14 

¼" N.P.T. FEMALE X FEMALE QUICK CONNECTOR 

PURGE / TEST HOSE 713274 1 27.49 

" I.D. Hose X 24" with ¼" N.P.T MALE OUTLETS 

PURGE / TEST HOSE ASSEMBLY 

713273 + 713274 ASSEBLED 

7132375 1 47.63 

NOTE: Other sizes available utilizing fusion reducers. 

TAPPING TEE TOOLS without handle 


TYPE I ( ½") AMA1-01 1 19.43 

TYPE I ( ¾") AMA2-01 1 19.43 

TYPE II 713251 1 19.43 

TAPPING TEE TOOLS with t-handle 


TYPE II Tool 713252 1 32.03 

HIGH VOLUME Tool 713268 1 56.70 

Repair Kits (Flat Rate) 


Overcap Repair Kit UC4201 5 21.72 

Electrofusion Repair Kit 

without Coupling 

EFRK02 1 16.00 


9


SERVICE SADDLE fittings (PE 2406/2708) 

Socket fused OUTLET 


NOMINAL SIZE product code box qty LIST PRICE 

1¼" X ½" CTS 508166063011 10 3.70 

1½" X ½" CTS 508190063011 10 3.70 

2" X ½" CTS 508238063011 10 3.70 

3" X ½" CTS 508350063011 10 3.70 

4" X ½" CTS 508450063011 10 3.70 

6" X ½" CTS 508663063011 10 3.70 

8" X ½" CTS 508863063011 10 3.70 

1¼" X ½" 508166084051 10 3.70 

1½" X ½" 508190084051 10 3.70 

2" X ½" 508238084051 10 3.70 

3" X ½" 508350084051 10 3.70 

4" X ½" 508450084051 10 3.70 

6" X ½" 508663084051 10 3.70 

8" X ½" 508863084051 10 3.70 

1¼" X ¾" 508166105081 10 3.70 

1½" X ¾" 508190105081 10 3.70 

2" X ¾" 508238105081 10 3.70 

3" X ¾" 508350105081 10 3.70 

4" X ¾" 508450105081 10 3.70 

6" X ¾" 508663105081 10 3.70 

8" X ¾" 508863105081 10 3.70 

1¼" X 1" 508166113081 10 6.12 

2" X 1" CTS 508238113081 10 6.12 

3" X 1" CTS 508350113081 10 6.12 

4" X 1" CTS 508450113081 10 6.12 

6" X 1" CTS 508663113081 10 6.12 

8" X 1" CTS 508863113081 10 6.12 

1¼" X 1" 508166132081 10 6.12 

2" X 1" 508238132081 10 6.12 

3" X 1" 508350132081 10 6.12 

4" X 1" 508450132081 10 6.12 

6" X 1" 508663132081 10 6.12 

8" X 1" 508863132081 10 6.12 



Socket fused OUTLET 

(SADDLE CONTOUR SIZE X OUTLET SIZE) (continued) 


1¼" X 1¼" 508166166071 10 9.82 

1½" X 1¼" 508190166071 10 9.82 

2" X 1¼" 508238166071 10 9.82 

3" X 1¼" 508350166071 10 9.82 

4" X 1¼" 508450166071 10 9.82 

6" X 1¼" 508663166071 10 9.82 

8" X 1¼" 508863166071 10 9.82 

Butt fused OUTLET 



1¼" X ¾" 518166105081 10 6.65 

1½" X ¾" 518190105081 10 6.65 

2" X ¾" 518238105081 10 6.65 

3" X ¾" 518350105081 10 6.65 

4" X ¾" 518450105081 10 6.65 

6" X ¾" 518663105081 10 6.65 

8" X ¾" 518863105081 10 6.65 

1¼" X 1" 518166132081 10 6.65 

2" X 1" 518238132081 10 6.65 

3" X 1" 518350132081 10 6.65 

4" X 1" 518450132081 10 6.65 

6" X 1" 518663132081 10 6.65 

8" X 1" 518863132081 10 6.65 

1¼" X 1¼" 518166166071 10 6.65 

1½" X 1¼" 518190166071 10 6.65 

2" X 1¼" 518238166071 10 6.65 

3" X 1¼" 518350166071 10 6.65 

4" X 1¼" 518450166071 10 6.65 

6" X 1¼" 518663166071 10 6.65 

8" X 1¼" 518863166071 10 6.65 

Protective sleeves are available. The last number of the Product Code is changed from a 1 to a 5 when a protective sleeve 

is included. Add $0.86 each when sleeves are included for sizes ½" CTS to ¾" IPS. Add $1.44 each for 1" CTS and 1" IPS. 

Add $2.48 each for 1¼" IPS size. 


11


BRANCH SADDLE fittings (PE 2406/2708) 

BUTT FUSED OUTLET: ROUND BASE 



2" X 2" 519238238081 10 17.29 

3" X 2" 519350238081 10 18.80 

4" X 2" 519450238081 10 21.34 

6" X 2" 519663238081 10 24.62 

8" X 2" 519863238081 10 27.65 

3" X 3" 519350350081 5 26.92 

4" X 3" 519450350081 5 26.92 

6" X 3" 519663350081 5 32.74 

8" X 3" 519863350081 5 32.74 

4" X 4" 519450450081 5 36.02 

6" X 4" 519663450081 5 36.02 

8" X 4" 519863450081 5 118.85 

6" X 6" 519663663081 5 118.85 

8" X 6" 519863663081 5 118.85 

BUTT FUSED OUTLET: RECTANGULAR BASE 



2" X 2" 539238238081 10 16.46 

3" X 2" 539350238081 10 17.90 

4" X 2" 539450238081 10 20.33 

6" X 2" 539663238081 10 23.44 

8" X 2" 539863238081 10 26.33 

3" X 3" 539350350081 5 25.64 

4" X 3" 539450350081 5 25.64 

4" X 4" 539450450081 5 31.19 

6" X 4" 539663450081 5 31.19 

8" X 4" 539863450081 5 34.30 

6" X 6" 539663663081 5 113.19 

8" X 6" 539863663081 5 113.19 

FABRICATED FITTINGS 

A wide variety of fabricated fittings are available. These include reducer tees, assemblies, spigot fittings, purge cap kits and 

specially designed connections. Please contact the JM Eagle sales department for availability, price, and delivery. Minimum 

order quantities may apply. 




PROTECTIVE SLEEVES (PE 2406/2708) 

Protective Sleeves 


½" cts SFTT, BFTT, IPS BFTT 450072401200 10 1.42 

½" IPS , CTS, ¾" IPS, spt's type 1 (AF 45-01) (1.0) 450072401223 10 2.31 

½" ips SFTT, ¾" IPS BFTT, 1" CTS BFTT 450072401201 10 1.96 

¾" IPS SFTT, 1" CTS SFTT, 1" IPS BFTT 450072401202 10 2.51 

1" IPS/CTS OUTLET MULTI SADDLES & OVERCAP SPT'S TYPE 1 

(AF 45-07) (3.0) 

450072401225 10 4.06 

1" IPS SFTT, 1¼" IPS BFTT 450072401205 10 3.42 

1¼" IPS SFTT 450072401207 6 4.31 

1" IPS/CTS , 1¼" IPS OUTLET HIGH VOLUME 

MULTISADDLES & HIGH VOL SPT'S ALDYL ONLY (AF 45-11) (4.5) 

NOTE: Protective sleeves are manufactured in polyethylene (PE) yellow or black. 


450072401226 10 6.12 

2" X 2" IPS TF, HIGH VOLUME TAPPING TEE (12" sleeve) 450072401210 6 5.45 


13


SPIGOT fittings (PE 2406/2708) 

SOCKET FUSED OUTLET 

NOMINAL SIZE SDR or wall product code LIST PRICE 

½" CTS Tee .09 543063063011 25.53 

½" IPS Tee 9.3 543084084051 11.28 

¾" IPS Tee 11.0 543105105081 11.28 

1" CTS Tee .099 543113113091 23.52 

1¼" IPS Tee 10.0 543166166071 21.62 

2" IPS Tee 11.0 553238238081 33.00 

3" IPS Tee 11.5 553350350091 60.06 

4" IPS Tee 11.5 553450450091 61.06 

6" IPS Tee 11.5 553663663091 157.41 

6" IPS Tee 13.5 553663663061 170.48 

8" IPS Tee 11.0 553863863081 421.60 

8" IPS Tee 13.5 553863863061 429.15 

½" CTS 90 DEGREE ELBOW .090 542063063011 13.44 

½" IPS 90 DEGREE ELBOW 9.3 542084084051 5.78 

¾" IPS 90 DEGREE ELBOW 11.0 542105105081 5.91 

1" CTS 90 DEGREE ELBOW .099 542113113091 6.60 

1¼" IPS 90 DEGREE ELBOW 10.0 542166166071 24.88 

2" IPS 90 DEGREE ELBOW 11.0 552238238081 22.77 







½" CTS CAP .090 545063000011 4.46 

½" IPS CAP 9.3 545084000051 4.46 

¾" IPS CAP 11.0 545105000081 4.62 

1" CTS CAP .099 545113000091 4.77 

1" IPS CAP 11.0 545132000081 5.31 

1¼" IPS CAP 10.0 545166000071 5.68 

2" IPS CAP 11.0 555238000081 10.99 

3" IPS CAP 11.5 555350000091 18.71 

4" IPS CAP 11.5 555450000061 30.27 



SOCKET FUSED OUTLET (continued) 

NOMINAL SIZE SDR or wall product code LIST PRICE 

4" IPS CAP 13.5 555450000091 29.11 

6" IPS CAP 13.5 555663000061 75.38 

6" IPS CAP 11.5 555663000091 73.27 

8" IPS CAP 13.5 555863000061 137.21 

8" IPS CAP 11.0 555863000081 134.88 

¾" IPS X ½" CTS Reducer 11 X .090 544105063011 6.82 

¾" IPS X ½" IPS Reducer 11 X 9.3 544105084051 6.82 

1" IPS X ¾" IPS Reducer 11 X 11 544132105081 7.84 

1" IPS X 1" CTS Reducer 11 X .099 544132113081 7.98 

1¼" IPS X ¾" IPS Reducer 10 X 11 544166105071 15.25 

1¼" IPS X 1" CTS Reducer 10 X .099 544166113071 15.25 

1¼" IPS X 1" IPS Reducer 10 X 11 544166132071 15.25 

2" IPS X ¾" IPS Reducer 11 X 11 544238105081 15.59 

2" IPS X 1" CTS Reducer 11 X .099 544238113081 15.59 

2" IPS X 1" IPS Reducer 11 X 11 544238132081 15.69 

2" IPS X 1¼" IPS Reducer 11 X 10 544238166071 15.80 

3" IPS X 2" IPS Reducer 11.5 X 11 554350238091 20.89 

4" IPS X 2" IPS Reducer 11.5 X 11 554450238091 31.78 

4" IPS X 3" IPS Reducer 11.5 X 11.5 554450350091 34.30 


8" IPS X 6" IPS Reducer 11 X 11.5 554863663081 166.32 


Spigot "Pup" LengthS Before Fusion: 

½" CTS - 1¼" CTS = 10" LONG 

1¼" IPS - 2" IPS = 12" LONG 

3" IPS - 4" IPS = 14" LONG 

6" IPS - 12" IPS = 24" Long 

Socket fusion fittings are used as the standard for tee's, elbows, caps 1¼" CTS and smaller and 2" IPS x smaller reduction 

reducer. Butt fusion fittings are used as the standard for all fittings 1¼" IPS through 12" IPS. For special spigots utilizing non 

standard butt or socket fittings, contact your sales representative for price and availability. 


15

02 

HDPE PRICE LIST 

Socket fusion fittings (PE 3408/3608/4710) 

socket fusion CAPS 


½" CTS 505063000012 100 2.37 

½" 505084000052 100 2.37 

¾" 505105000082 100 2.60 

1" CTS 505113000082 100 3.18 

1" 505132000082 100 3.47 

1¼" 505166000072 100 3.81 

1½" 505190000082 100 3.93 

2" 505238000082 100 3.92 

3" 505350000082 10 23.60 

4" 505450000082 10 42.30 

socket fusion REDUCERS 


½" X ½" CTS 504084063012 100 5.99 

¾" X ½" CTS 504105063012 100 5.94 

¾" X ½" 504105084052 100 5.94 

1" CTS X ½" CTS 504113063012 100 5.94 

1" X ½" CTS 504132063012 100 5.94 

1" X ½" 504132084052 100 6.31 

1" CTS X ¾" 504113105082 100 5.94 

1" X ¾" 504132105082 100 5.15 

1" X 1" CTS 504132113082 100 5.15 

1¼" X ½" CTS 504166063012 100 5.94 

1¼" X ¾" 504166105072 100 9.09 

1¼" X 1" CTS 504166113072 100 9.09 

1¼" X 1" 504166132072 100 8.66 

1½" X ¾" 504190105082 100 10.92 

1½" X 1¼" 504190166072 100 10.40 

2" X ¾" 504238105082 100 9.82 

2" X 1" 504238132082 100 9.82 

2" X 1¼" 504238166072 100 9.82 

2" X 1½" 504238190082 100 10.86 

3" X 2" 504350238082 100 12.24 

4" X 2" 504450238082 100 22.99 

4" X 3" 504450350082 100 25.13 



socket fusion Coupling 


½" CTS 500063063012 100 1.50 

½" 500084084052 100 1.50 

¾" 500105105082 100 1.68 

¾" CTS 500088088052 100 2.66 

1" CTS 500113113082 100 2.03 

1" 500132132082 100 1.68 

1¼" 500166166072 100 1.76 

1¼" CTS 500138138082 100 2.06 

1½" 500190190082 100 2.43 

2" 500238238082 100 2.49 

3" 500350350082 10 15.13 

4" 500450450082 10 21.45 

socket fusion 90 DEGREE ELBOW 


½" CTS 502063063012 100 3.35 

½" 502084084052 100 3.35 

¾" 502105105082 100 3.47 

1" CTS 502113113082 100 3.81 

1" 502132132082 100 4.62 

1¼" 502166166072 100 4.62 

1½" 502190190082 100 7.97 

2" 502238238082 10 7.80 

3" 502350350082 4 22.15 

4" 502450450082 4 110.53 

socket fusion TEE 


½" CTS 503063063012 100 2.89 

½" 503084084052 100 2.89 

¾" 503105105082 100 2.89 

1" CTS 503113113082 100 3.81 

1" 503132132082 100 3.68 

1¼" 503166166072 100 5.15 

1½" 503190190082 100 10.05 

2" 503238238082 10 10.40 

3" 503350350082 4 35.90 

4" 503450450082 4 66.13 


17


butt fusion fittings (PE 3408/3608/4710) 

butt fusion caps 


1" CTS 515113000082 100 10.38 

½" 515084000052 100 6.60 

¾" 515105000082 100 4.67 

1" 515132000082 100 4.95 

1¼" 515166000072 100 5.28 

1½" 515190000082 100 5.61 

2" 515238000082 100 5.94 

3" 515350000082 10 7.78 

4" 515450000082 10 16.80 

6" 515663000082 5 40.85 

8" 515863000082 1 73.13 

butt fusion tee 90 degREE ELBOW 


¾" 512105105082 100 8.21 

1" 512132132082 100 8.62 

1¼" 512166166072 100 8.09 

1½" 512190190082 10 7.31 

2" 512238238082 10 8.45 

3" 512350350082 4 19.45 

4" 512450450082 4 26.18 

6" 512663663082 2 61.79 

8" 512863863082 1 208.66 

2" SDR 7 512238238012 10 15.02 

2" SDR 9 512238238042 10 15.02 

3" SDR 7 512350350012 4 32.92 

3" SDR 9 512350350042 4 32.92 

4" SDR 7 512450450012 4 43.89 

4" SDR 9 512450450042 4 43.89 



utt fusion 45 DEGREE ELBOW 


3" 511350350082 4 19.45 

4" 511450450082 4 26.18 

6" 511663663082 2 61.79 

8" 511863863082 1 216.48 

10" 511075075082 1 238.13 

12" 511275275082 1 1086.75 

3" SDR 7 511350350012 4 32.92 

3" SDR 9 511350350042 4 32.92 

4" SDR 7 511450450012 4 43.89 

4" SDR 9 511450450042 4 43.89 

butt fusion REDUCERS 


½" X ½" CTS 514084063012 100 12.26 

¾" X ½" CTS 514105063012 100 8.79 

1" CTS X ½" CTS 514113063012 100 9.45 

1" X ½" CTS 514132063012 100 13.65 

1" X ½" 514132084052 100 16.80 

1" X ¾" 514132105082 100 17.22 

1" X 1" CTS 514132113082 100 18.08 

1¼" X 1" CTS 514166113082 10 15.33 

1¼" X 1" 514166132082 10 16.59 

2" X 1" 514238132082 10 8.89 

2" X 1¼" 514238166072 10 8.16 

2" X 1½" 514238190082 10 11.61 

3" X 2" 514350238082 10 12.71 

4" X 2" 514450238082 10 14.46 

4" X 3" 514450350082 10 18.18 

6" X 4" 514663450082 6 42.99 

8" X 6" 514863663082 1 84.50 

10" X 8" 514075863082 1 256.20 

12" X 8" 514275863082 1 378.92 

2" X 1¼" SDR 7 514238166012 10 18.57 

2" X 1¼" SDR 9 514238166042 10 18.57 

3" X 2" SDR 7 514350238012 10 20.79 

3" X 2" SDR 9 514350238042 10 20.79 

4" X 2" SDR 7 514450238012 10 26.57 

4" X 2" SDR 9 514450238042 10 26.57 

4" X 3" SDR 7 514450350012 10 27.72 

4" X 3" SDR 9 514450350042 10 27.72 


19


butt fusion fittings (PE 3408/3608/4710) 

(CONTINUED) 

butt fusion TEE 


½" CTS 513063063012 100 7.98 

½" 513084084052 100 8.82 

¾" 513105105082 100 8.53 

1" CTS 513113113082 100 9.45 

1" 513132132082 100 9.66 

1¼" 513166166072 100 10.03 

1½" 513190190082 10 17.81 

2" 513238238082 10 10.67 

3" 513350350082 4 21.76 

4" 513450450082 4 31.65 

6" 513663663082 1 78.31 

8" 513863863082 1 345.91 

2" SDR 7 513238238012 10 15.02 

2" SDR 9 513238238042 10 15.02 

3" SDR 7 513350350012 4 35.23 

3" SDR 9 513350350042 4 35.23 

4" SDR 7 513450450012 4 46.20 

4" SDR 9 513450450042 4 46.20 

Geothermal 


U Bend ¾" IPS 585105105082 10 29.946 

U Bend 1" IPS 585132132082 10 31.71 

U Bend 1¼" IPS 585166166082 6 33.51 

Note: U Bend fittings are designed for geothermal closed loop pump applications. 

U Bends are available with or without pups and available fused to 

custom length double coils. Check with your JM Eagle sales representative 

for pricing and availability. 



TAPPING TEE (TYPE II) without sleeve (PE 3408/3608/4710) 

¾" PUNCH: Socket Fusion OUTlet 


1¼" X ½" 547166084152 10 11.19 

1¼" X ½" CTS 547166063112 10 11.19 

1¼" X ¾" 547166105182 10 11.19 

1¼" X 1" CTS 547166113182 10 13.05 

1¼" X 1" 547166132182 10 13.05 

1¼" X 1¼" 547166166172 10 23.36 

1½" X ½" 547190084152 10 11.19 

1½" X ½" CTS 547190063112 10 11.19 

1½" X ¾" 547190105182 10 11.19 

1½" X 1" CTS 547190113182 10 13.05 

1½" X 1" 547190132182 10 13.05 

1½" X 1¼" 547190166172 10 23.36 

2" X ½" 547238084152 10 11.19 

2" X ½" CTS 547238063112 10 11.19 

2" X ¾" 547238105182 10 11.19 

2" X 1" CTS 547238113182 10 13.05 

2" X 1" 547238132182 10 13.05 

2" X 1¼" 547238166172 10 23.36 

3" X ½" 547350084152 10 11.19 

3" X ½" CTS 547350063112 10 11.19 

3" X ¾" 547350105182 10 11.19 

3" X 1" CTS 547350113182 10 13.05 

3" X 1" 547350132182 10 13.05 

3" X 1¼" 547350166172 10 23.36 

4" X ½" 547450084152 10 11.19 

4" X ½" CTS 547450063112 10 11.19 

4" X ¾" 547450105182 10 11.19 

4" X 1" CTS 547450113182 10 13.05 

4" X 1" 547450132182 10 13.05 

4" X 1¼" 547450166172 10 23.36 

6" X ½" 547663084752 10 11.19 

6" X ½" CTS 547663063712 10 11.19 

6" X ¾" 547663105782 10 11.19 

6" X 1" CTS 547663113782 10 13.05 

6" X 1" 547663132782 10 13.05 

6" X 1¼" 547663166772 10 23.36 

8" X ½" 547863084752 10 11.19 

8" X ½" CTS 547863063712 10 11.19 

8" X ¾" 547863105782 10 11.19 

8" X 1" CTS 547863113782 10 13.05 

8" X 1" 547863132782 10 13.05 

8" X 1¼" 547863166772 10 23.36 

* Change last digit from 2 to 6 when including protective sleeve, add $.86 for ½" 

CTS to ¾" IPS, add $1.44 each for 1" CTS & 1" IPS, add $2.48 for 1¼" IPS. 


21


TAPPING TEE (TYPE II) without sleeve (PE 3408/3608/4710) 

(CONTINUED) 

22 POLYETHYLENE FITTINGS PRICE LIST 

¾" PUNCH: Butt Fusion OUTlet 


1¼" X ½" 557166084152 10 11.19 

1¼" X ½" CTS 557166063112 10 11.19 

1¼" X ¾" 557166105182 10 11.19 

1¼" X 1" CTS 557166113182 10 13.05 

1¼" X 1" 557166132182 10 13.05 

1¼" X 1¼" 557166166172 10 23.36 

1½" X ½" 557190084152 10 11.19 

1½" X ½" CTS 557190063112 10 11.19 

1½" X ¾" 557190105182 10 11.19 

1½" X 1" CTS 557190113182 10 13.05 

1½" X 1" 557190132182 10 13.05 

1½" X 1¼" 557190166172 10 23.36 

2" X ½" 557238084152 10 11.19 

2" X ½" CTS 557238063112 10 11.19 

2" X ¾" 557238105182 10 11.19 

2" X 1" CTS 557238113182 10 13.05 

2" X 1" 557238132182 10 13.05 

2" X 1¼" 557238166172 10 23.36 

3" X ½" 557350084152 10 11.19 

3" X ½" CTS 557350063112 10 11.19 

3" X ¾" 557350105182 10 11.19 

3" X 1" CTS 557350113182 10 13.05 

3" X 1" 557350132182 10 13.05 

3" X 1¼" 557350166172 10 23.36 

4" X ½" 557450084152 10 11.19 

4" X ½" CTS 557450063112 10 11.19 

4" X ¾" 557450105182 10 11.19 

4" X 1" CTS 557450113182 10 13.05 

4" X 1" 557450132182 10 13.05 

4" X 1¼" 557450166172 10 23.36 

6" X ½" 557663084752 10 11.19 

6" X ½" CTS 557663063712 10 11.19 

6" X ¾" 557663105782 10 11.19 

6" X 1" CTS 557663113782 10 13.05 

6" X 1" 557663132782 10 13.05 

6" X 1¼" 557663166772 10 23.36 

8" X ½" 557863084752 10 11.19 

8" X ½" CTS 557863063712 10 11.19 

8" X ¾" 557863105782 10 11.19 

8" X 1" CTS 557863113782 10 13.05 

8" X 1" 557863132782 10 13.05 

8" X 1¼" 557863166772 10 23.36 

NOTE: IPS is used throughout this catalog unless CTS is designated.


high volume tapping tee without sleeve (PE 3408/3608/4710) 

SOCKET outlet 

(2" main, 1½" punch; 3"-8" main, 1 " punch) 


2" X 1¼" 50A238166572 5 109.86 

3" X 1¼" 50A350166672 5 109.86 

4" X 1¼" 50A450166672 5 109.86 

6" X 1¼" 50A663166672 5 109.86 

8" X 1¼" 50A863166672 5 109.86 

10" X 1¼" 50A075166672 5 109.86 

12" X 1¼" 50A275166672 5 109.86 

1¼" socket high volume tap tee outlet outside diameter is not designed to accept a socket fusion fitting. 2" butt fusion 

HVSPT's should be used for this application. 

Please contact sales representative for availability of 2" IPS socket outlet and 1¼" IPS butt fusion outlet high volume tapping 

tees. Protective sleeves are available. The last number of the Product Code is changed from a 2 to 5 when a protective sleeve 

is included. Add $2.90 each when sleeves are included. 

butt fused outlet 

(2" main, 1½" punch; 3"-8" main, 1 " punch) 


2" X 2" 51A238238582 5 109.86 

3" X 2" 51A350238682 5 109.86 

4" X 2" 51A450238682 5 109.86 

6" X 2" 51A663238682 5 109.86 

8" X 2" 51A863238682 5 109.86 

10" X 2" 51A075238682 5 109.86 

12" X 2" 51A275238682 5 109.86 

* Change last digit from 2 to 5 when including protective sleeve, add $2.90 each when sleeves are included. 

tapping tee test caps 

DESCRIPTION product code box qty LIST PRICE 

TYPE II 255000000002 10 44.10 

Yellow Polyethylene Cap - Buttress Thread Side "O" Ring 

HIGH VOLUME 255000000003 10 56.70 

Black Polyethylene Cap - Buttress Thread Side "O" Ring 

Quick Connector 713273 10 18.31 

¼" N.P.T. Female X Female Quick Connector 

Hose Only 713274 10 24.99 

" I.D. Hose X 24" with ¼" N.P.T. Male Outlets 

Hose Assembly 713275 10 43.30 

713273 + 713274 Assembled 



23


SERVICE SADDLES (PE 3408/3608/4710) 

SOCKET FUSED OUTLETS 



1¼" X ½" CTS 508166063012 10 5.89 

1½" X ½" CTS 508190063012 10 5.89 

2" X ½" CTS 508238063012 10 5.89 

3" X ½" CTS 508350063012 10 5.89 

4" X ½" CTS 508450063012 10 5.89 

6" X ½" CTS 508663063012 10 5.89 

8" X ½" CTS 508863063012 10 5.89 

1¼" X ½" 508166084052 10 5.89 

1½" X ½" 508190084052 10 5.89 

2" X ½" 508238084052 10 5.89 

3" X ½" 508350084052 10 5.89 

4" X ½" 508450084052 10 5.89 

6" X ½" 508663084052 10 5.89 

8" X ½" 508863084052 10 5.89 

1¼" X ¾" 508166105082 10 5.89 

1½" X ¾" 508190105082 10 5.89 

2" X ¾" 508238105082 10 5.89 

3" X ¾" 508350105082 10 5.89 

4" X ¾" 508450105082 10 5.89 

6" X ¾" 508663105082 10 5.89 

8" X ¾" 508863105082 10 5.89 

1¼" X 1" 508166132082 10 6.93 

2" X 1" 508238132082 10 6.93 

3" X 1" 508350132082 10 6.93 

4" X 1" 508450132082 10 6.93 

6" X 1" 508663132082 10 6.93 

8" X 1" 508863132082 10 6.93 

1¼" X 1¼" 508166166072 10 9.82 

1½" X 1¼" 508190166072 10 9.82 

2" X 1¼" 508238166072 10 9.82 

3" X 1¼" 508350166072 10 9.82 

4" X 1¼" 508450166072 10 9.82 

6" X 1¼" 508663166072 10 9.82 

8" X 1¼" 508863166072 10 9.82 



utT FUSED OUTLETS 


1¼" X ¾" 518166105082 10 6.65 

1½" X ¾" 518190105082 10 6.65 

2" X ¾" 518238105082 10 6.65 

3" X ¾" 518350105082 10 6.65 

4" X ¾" 518450105082 10 6.65 

6" X ¾" 518663105082 10 6.65 

8" X ¾" 518863105082 10 6.65 

1¼" X 1" 518166132082 10 6.65 

2" X 1" 518238132082 10 6.65 

3" X 1" 518350132082 10 6.65 

4" X 1" 518450132082 10 6.65 

6" X 1" 518663132082 10 6.65 

8" X 1" 518863132082 10 6.65 

1¼" X 1¼" 518166166072 10 6.93 

1½" X 1¼" 518190166072 10 6.93 

2" X 1¼" 518238166072 10 6.93 

3" X 1¼" 518350166072 10 6.93 

4" X 1¼" 518450166072 10 6.93 

6" X 1¼" 518663166072 10 6.93 

8" X 1¼" 518863166072 10 6.93 

Protective sleeves are available. The last number of the Product Code is changed from 

2 to a 6 when protective sleeve is included. Add $0.86 each when sleeves are included 

for sizes ½" CTS to ¾" IPS. Add $1.44 each for 1" CTS and 1" IPS. Add $2.48 each for 

1¼" IPS size. 


25


BRANCH SADDLES (PE 3408/3608/4710) 

BUTT FUSED OUTLET: ROUND BASE 

(SADDLE CONTOUR SIZE x OUTLET SIZE) 


2" X 2" 519238238082 10 18.64 

3" X 2" 519350238082 10 18.64 

4" X 2" 519450238082 10 18.64 

6" X 2" 519663238082 10 18.64 

8" X 2" 519863238082 10 18.64 

3" X 3" 519350350082 10 24.97 

4" X 3" 519450350082 10 24.97 

6" X 3" 519663350082 10 24.97 

8" X 3" 519863350082 10 24.97 

4" X 4" 519450450082 10 34.17 

6" X 4" 519663450082 10 34.17 

8" X 4" 519863450082 10 34.17 

6" X 6" 519663663082 10 81.68 

8" X 6" 519863663082 10 81.68 




FLANGES (PE 3408/3608/4710) 

flange adaptors 


2" X 6" LONG 516238238082 10 15.25 

3" X 6" LONG 516350350082 4 18.85 

4" X 6" LONG 516450450082 4 23.76 

6" X 8" LONG 516663663082 2 37.23 

8" X 9" LONG 516863863082 1 52.25 

backup flanges 

(For use with flange adaptors) 


2" 150071208000 1 19.44 

3" 150071208100 1 26.13 

4" 150071208200 1 51.37 

6" 150071208300 1 52.88 

8" 150071208400 1 90.33 



27


SOCKET REDUCER TEES (PE 3408/3608/4710) 

Socket Reducer Tees 

A x B x C Size product code box qty LIST PRICE 

1¼" X ¾" X ¾" 561661051052 1 9.50 

1¼" X ¾" X 1" 561661051322 1 9.50 

1¼" X ¾" X 1¼" 561661051662 1 9.50 

1¼" X 1" X ¾" 561661321052 1 9.50 

1¼" X 1" X 1" 561661321322 1 9.50 

1¼" X 1" X 1¼" 561661321662 1 9.50 

1¼" X 1¼" X ¾" 561661661052 1 9.07 

1¼" X 1¼" X 1" 561661661322 1 9.07 

1½" X ¾" X ¾" 561901051052 1 12.07 

1½" X ¾" X 1" 561901051322 1 12.07 

1½" X ¾" X 1¼" 561901051662 1 12.07 

1½" X ¾" X 1½" 561901051902 1 12.07 

1½" X 1" X ¾" 561901321052 1 12.07 

1½" X 1" X 1" 561901321322 1 12.07 

1½" X 1" X 1¼" 561901321662 1 12.07 

1½" X 1" X 1½" 561901321902 1 12.07 

1½" X 1¼" X ¾" 561901661052 1 12.07 

1½" X 1¼" X 1" 561901661322 1 12.07 

1½" X 1¼" X 1¼" 561901661662 1 12.07 

1½" X 1¼" X 1½" 561901661902 1 12.07 

1½" X 1½" X ¾" 561901901052 1 11.73 

1½" X 1½" X 1" 561901901322 1 11.73 

1½" X 1½" X 1¼" 561901901662 1 11.73 

2" X 1¼" X ¾" 562381661052 1 13.17 

2" X 1¼" X 1" 562381661322 1 13.17 

2" X 1¼" X 1¼" 562381661662 1 13.17 

2" X 1½" X ¾" 562381901052 1 13.17 

2" X 1½" X 1" 562381901322 1 13.17 

2" X 1½" X 1¼" 562381901662 1 13.17 

2" X 2" X 1¼" 562382381662 1 12.82 

2" X 2" X ¾" 562382381052 1 12.82 

2" X 2" X 1" 562382381322 1 12.82 



03 

METFIT ® 

FITTINGS & tools 

caps 

product code bag qty LIST PRICE 

½" CTS .090 WALL SDR 7 605063000012 25 11.08 

½" CTS .062 WALL SDR 10 605063000072 25 11.34 

½" IPS .090 WALL SDR 9.3 605084000052 25 18.48 

¾" CTS .090 WALL SDR 9.8 605088000062 25 18.48 

¾" IPS .095 WALL SDR 11 605105000082 25 20.58 

1" CTS .090 WALL SDR 12.5 605113000002 20 23.90 

1" CTS .099 WALL SDR 11/11.5 605113000092 20 22.85 

1" IPS .119 WALL SDR 11 605132000082 20 41.58 

1¼" CTS .090 WALL SDR 15.3 605138000082 10 42.57 

1¼" IPS .166 WALL SDR 10 605166000072 10 50.19 

1¼" IPS .151 WALL SDR 11 605166000082 10 51.92 

2" IPS .216 WALL SDR 11 605238000082 10 62.54 

COUPLINGS 

product code bag qty LIST PRICE 

½" CTS .090 WALL SDR 7 600063063012 25 12.15 

½" CTS .062 WALL SDR 10 600063063072 25 12.42 

½" IPS .090 WALL SDR 9.3 600084084052 25 14.13 

¾" CTS .090 WALL SDR 9.8 600088088062 25 14.96 

¾" IPS .095 WALL SDR 11 600105105082 25 24.95 

1" CTS .099 WALL SDR 11/11.5 600113113092 10 24.95 

1" CTS .090 WALL SDR 12.5 600113113002 10 27.74 

1" IPS .119 WALL SDR 11 600132132082 10 31.36 

1¼" CTS .090 WALL SDR 15.3 600138138082 10 48.43 

REPAIR COUPLINGS 

product code box qty LIST PRICE 

1¼" IPS .151 WALL SDR 11 601166166082 25 56.96 

1¼" IPS .166 WALL SDR 10 601166166072 25 58.41 

1½" IPS .173 WALL SDR 11 601190190082 25 64.09 

2" IPS .216 WALL SDR 11 601238238082 25 78.98 



29

METFIT ® 


(CONTINUED) 

90 DEGREE ELBOWS 

product code bAG qty LIST PRICE 

½" CTS .090 WALL SDR 7 602063063012 25 28.88 

½" IPS .090 WALL SDR 9.3 602084084052 25 33.21 

¾" CTS .090 WALL SDR 9.8 602088088062 10 34.65 

¾" IPS .095 WALL SDR 11 602105105082 10 47.57 

1" CTS .099 WALL SDR 11/11.5 602113113092 10 51.23 

1" CTS .090 WALL SDR 12.5 602113113002 10 53.67 

1" IPS .119 WALL SDR 11 602132132082 10 54.29 

1¼" CTS .090 WALL SDR 15.3 602138138082 5 57.89 

1¼" IPS .166 WALL SDR 10 602166166072 5 95.29 

1¼" IPS .151 WALL SDR 11 602166166082 5 98.16 

2" IPS .216 WALL SDR 11 602238238082 5 136.01 

TEES 

product code bAg qty LIST PRICE 

½" CTS .090 WALL SDR 7 603063063012 25 29.40 

½" IPS .090 WALL SDR 9.3 603084084052 25 29.40 

¾" CTS .090 WALL SDR 11 603088088062 5 42.92 

¾" IPS .095 WALL SDR 11 603105105082 5 42.92 

1" CTS .099 WALL SDR 11/11.5 603113113092 5 56.45 

1" CTS .090 WALL SDR 12.5 603113113002 5 59.14 

1" IPS .119 WALL SDR 11 603132132082 5 59.14 

1¼" CTS .090 WALL SDR 15.3 603138138082 5 86.00 

1¼" IPS .166 WALL SDR 10 603166166072 5 86.00 

1¼" IPS .151 WALL SDR 11 603166166082 5 86.00 

2" IPS .216 WALL SDR 11 603238238082 5 86.00 


educers 

SDr SDr product code bag qty LIST PRICE 

½" CTS .090 WALL 7 ½" CTS .062 WALL 10 604063063002 20 17.33 

½" IPS .090 WALL 9.3 ½" CTS .090 WALL 7 604084063002 20 31.19 

¾" CTS .090 WALL 9.8 ½" CTS .090 WALL 7 604088063012 20 31.19 

¾" CTS .090 WALL 9.8 ½" IPS .090 WALL 9.3 604088084052 20 32.34 

¾" IPS .095 WALL 11 ½" CTS .090 WALL 7 604105063002 20 32.40 

¾" IPS .095 WALL 11 ½" IPS .090 WALL 9.3 604105084002 20 34.65 

¾" IPS .095 WALL 11 ¾" CTS .090 WALL 9.8 604105088062 20 34.65 

1" CTS .099 WALL 11.5 ½" IPS .090 WALL 9.3 604113084062 20 39.27 

1" CTS .090 WALL 12.5 ½" IPS .090 WALL 9.3 604113084012 20 40.43 

1" CTS .099 WALL 11.5 ¾" CTS .090 WALL 9.8 604113088062 20 40.43 

1" CTS .090 WALL 12.5 ¾" CTS .090 WALL 9.8 604113088002 20 40.43 

1" CTS .090 WALL 12.5 ¾" IPS .095 WALL 11 604113105002 20 34.65 

1" CTS .099 WALL 11.5 ¾" IPS .095 WALL 11 604113105012 20 34.65 

1" CTS .099 WALL 11.5 ½" CTS .090 WALL 7 604113063012 20 34.16 

1" CTS .090 WALL 12.5 ½" CTS .090 WALL 7 604113063002 20 35.85 

1" IPS .119 WALL 11 ½" CTS .090 WALL 7 604132063002 10 46.20 

1" IPS .119 WALL 11 ½" IPS .090 WALL 9.3 604132084002 10 46.20 

1" IPS .119 WALL 11 ¾" CTS .090 WALL 9.8 604132088002 10 46.20 

1" IPS .119 WALL 11 ¾" IPS .095 WALL 11 604132105002 10 46.20 

1" IPS .119 WALL 11 1" CTS .090 WALL 12.5 604132113002 10 56.20 

1" IPS .119 WALL 11 1" CTS .099 WALL 11.5 604132113092 10 46.20 

1¼" CTS .090 WALL 15.3 ½" CTS .090 WALL 7 604138063012 10 51.98 

1¼" CTS .090 WALL 15.3 ½" IPS .090 WALL 9.3 604138084052 10 57.75 

1¼" CTS .090 WALL 15.3 ¾" CTS .090 WALL 9.8 604138088062 10 57.75 

1¼" CTS .090 WALL 15.3 ¾" IPS .095 WALL 11 604138105082 5 51.98 

1¼" CTS .090 WALL 15.3 1" CTS .099 WALL 11.5 604138113092 5 51.98 

1¼" CTS .090 WALL 15.3 1" CTS .090 WALL 12.5 604138113002 5 51.98 

1¼" CTS .090 WALL 15.3 1" IPS .119 WALL 11 604138132082 5 51.98 

2" IPS .216 WALL 11 1¼" IPS .166 WALL 10 604238166072 5 95.29 

2" IPS .216 WALL 11 1¼" IPS .151 WALL 11 604238166082 5 95.29 


31

METFIT ® 


(CONTINUED) 

TOOLS / KITS / CUTTERS 

product code box qty LIST PRICE 

½" CTS — 1¼" CTS Series 200 V Tool (including pins) 727007 1 642.68 

½" CTS — 1½" IPS, ¾" IPS, 1" CTS UNIVERSAL 

ADAPTOR JAWS (including pins) 

727100 1 97.02 

½" CTS Adaptor Jaws (set of 2) for V-Tool 727101 1 60.64 

½" IPS — ¾" CTS Adaptor Jaws (set of 2) for V-Tool 727102 1 60.64 

1" CTS Adaptor Jaws (set of 2) for V-Tool 727121 1 60.64 

1" IPS — 1¼" CTS Adaptor Jaws (set of 2) V-Tool 727131 1 72.77 

¾" IPS Adaptor Jaws (set of 2) for V-Tool 727112 1 72.77 

½" CTS — 1¼" CTS Pins (set of 2) for V-Tool 727401 1 36.00 

Series 200 Hydraulic Tool with 2" IPS adaptor jaws 727006 1 970.20 

RELIEF VALVE FOR SERIES 200 HYDRAULIC TOOL 727546 1 86.47 

Hydraulic Pump-Dual stage 727052 1 424.20 

Hydraulic Hose 727053 1 97.02 

Series 200 Hydraulic System with 2" IPS jaws 

INCLUDES HYDRAULIC TOOL, PUMP, HOSE 

727016 1 1443.17 

Series 200 Hydraulic System with 1¼" & 2" IPS jaws 

INCLUDES HYDRAULIC TOOL, PUMP, HOSE 

727018 1 1617.77 

1¼" IPS Hydraulic Adaptor Jaws 727206 1 186.90 

1½" IPS Hydraulic Adaptor Jaws 727208 1 194.25 

2" IPS Hydraulic Adaptor Jaws 727207 1 210.00 

Ratchet Mechanical Tool 727013 1 537.00 

½" CTS - 1" CTS Installation Tool 727011 1 299.25 

½" CTS Installation Tool (Nutcracker) 727001 1 246.89 

Metfit ® Tool Kit includes 1 each of the following items: 

1. Tool box 

2. 727007 V-tool 

3. 727100 Universal Jaw 

4. 727131 1" IPS/ 1¼" CTS Jaw 

5. 727006 Hydro Tool without 2" Jaws 

6. 727206 1¼" IPS Jaws 

7. 727208 1½" IPS Jaws 

8. 727052 Hydraulic Pump 

9. 727053 Hydraulic Hose 

Metfit ® Tool Kit includes same as 727020 but also 

includes ½" CTS Installation Tool (Nutcracker) 

727020 1 2750.00 

727021 1 3050.00 


Warranty 

JM EAGLE PRODUCTS LIMITED WARRANTY 

J-M Manufacturing Co., Inc. (JM Eagle ) warrants that its standard polyvinyl chloride (PVC), polyethylene (PE), conduit/ 

plumbing/Solvent Weld and Acrylonitrile-Butadiene-Styrene (ABS) pipe Products (“Products”) are manufactured in accordance 

with applicable industry specifications referenced on the Product and are free from defects in workmanship and materials. Every 

claim under this warranty shall be void unless in writing and received by JM Eagle within thirty (30) days of the date the defect 

was discovered, and within one (1) year of the date of shipment from the JM Eagle plant. Claims for Product appearance defects, 

such as sun-bleached pipe etc., however, must be made within thirty (30) days of the date of the shipment from the JM Eagle 

plant. This warranty specifically excludes any Products allowed to become sun-bleached after shipment from the JM Eagle 

plant. Proof of purchase with the date thereof must be presented to the satisfaction of JM Eagle , with any claim made pursuant 

to this warranty. JM Eagle must first be given an opportunity to inspect the alleged defective Products in order to determine 

if it meets applicable industry standards, if the handling and installation have been satisfactorily performed in accordance with 

JM Eagle recommended practices and if operating conditions are within standards. Written permission and/or a Return 

Goods Authorization (RGA) must be obtained along with instructions for return shipment to JM Eagle of any Products claimed 

to be defective. 

The limited and exclusive remedy for breach of this Limited Warranty shall be, at JM Eagle’s sole discretion, the replacement 

of the same type, size and like quantity of non-defective Product, or credits, offsets, or combination of thereof, for the 

wholesale purchase price of the defective unit. 

This Limited Warranty does not apply for any Product failures caused by user’s flawed designs or specifications, unsatisfactory 

applications, improper installations, use in conjunction with incompatible materials, contact with aggressive chemical agents, 

freezing or overheating of liquids in the product and any other misuse causes not listed here. This Limited Warranty also 

excludes failure or damage caused by fire stopping materials, tread sealants, plasticized vinyl products or damage caused by 

the fault or negligence of anyone other than JM Eagle , or any other act or event beyond the control of JM Eagle . 

JM Eagle’s liability shall not, at any time, exceed the actual wholesale purchase price of the Product. The warranties in 

this document are the only warranties applicable to the Product and there are no other warranties, expressed or implied. This 

Limited Warranty specifically excludes any liability for general damages, consequential or incidental damages, including without 

limitation, costs incurred from removal, reinstallation, or other expenses resulting from any defect. IMPLIED WARRANTIES 

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY DISCLAIMED AND JM EAGLE 

SHALL NOT BE LIABLE IN THIS RESPECT NOTWITHSTANDING JM EAGLE’S ACTUAL KNOWLEDGE THE PRODUCT’S 

INTENDED USE. 

JM Eagle’s Products should be used in accordance with standards set forth by local plumbing and building laws, 

codes, or regulations and the applicable standards. Failure to adhere to these standards shall void this Limited 

Warranty. Products sold by JM Eagle that are manufactured by others are warranted only to the extent and limits of 

the warranty of the manufacturer. No statement, conduct or description by JM Eagle or its representative, in addition 

to or beyond this Limited Warranty, shall constitute a warranty. This Limited Warranty may only be modified in writing signed 

by an officer of JM Eagle . 


33

DATA: 


Notes:

Notes:

PLANT LOCATIONS 

J-M Manufacturing Co., Inc. and PW Eagle, Inc. are doing business as JM Eagle .

JM Eagle 

• The leader in pipe innovation 

• The highest level of quality 

• The largest breadth of product 

• The widest capacity 

• Express delivery 

Tacoma 

Sunnyside 

McNary 

Cameron Park 

Stockton 

Visalia 

Kingman 

Fontana 

Perris 

Pueblo 

Wilton 

Hastings 

Columbia 

Tulsa 

Magnolia 

Meadville 

Butner 

Conroe 

Wharton 

Batchelor 

Adel 

Mexico 

Plant Locations 

Revised March 2011 

JME-17F 

© J-M Manufacturing Co., Inc. 

Building essentials 

for a better tomorrow 

5200 West Century Blvd 

Los Angeles, CA 90045 

T: 800.621.4404 

F: 800.451.4170 

www.JMEagle.com 

REGIONAL OFFICE: 

Nine Peach Tree Hill Road 

Livingston, NJ 07039 

T: 973.535.1633 

F: 973.533.4185 

PE Fittings Customer Service: 800.962.1514

Polyethylene Fittings Brochure & Price List - JM Eagle

Create successful ePaper yourself

Delete template?

Save as template?