Revision of a "Hyper" in Accordance with an ... - Neuman & Esser

◄ Since the acquisition of the Penn
Process Compression line (PPC) in
Sept. 2010 and the associated
extensive documentation, the NEA
gRoUP in the US was confronted
with a space issue and started initial
planning for an expansion in late
2010, finalizing the basic concept in
early 2011.
On Aug. 23, 2011, in Katy, TX, demolition
work was started in the
existing area planned for the building
extension, after which the whole
construction process ran in ac-
cordance with the estimated time
◄ On Nov. 18, NEA South East
Asia had good reason to be happy
as, following 52 intense weeks'
coordination and monitoring, their
large-scale construction project in
Rayong was successfully completed.
It was planned to expand
the existing 1,600 m² compressor
skid packaging hall by a further
1,125 m² including a 30 t overhead
crane and 50 t package handling
equipment required for the completion
of large compressor sys-
schedule. The expansion of the
building comprises 275 m² on two
floors. The new space will host four
offices and two large employee
areas, each with four employees
and space for six to seven. The new
structure will be ready for move-in
prior to Dec. 15 and work can then
proceed on changes to the existing
office. This includes the relocation
of several walls and adding a rolling
shelving system to store most of the
PPC documentation. Following this,
the NEA GROUP in the US will have
adequate space for future growth!
tems. Additionally there will be two
staff offices, a storage room, factory
washroom facilities, a 10 m
wide entrance road, a new gate
house as well as various roads
and parking on the premises. On
Dec. 2, Stefanie Peters, Managing
Partner, will inaugurate the operating
facility in its new outfit within
the scope of the Compressor Day
in front of some 100 guests. This
will set the foundation for further
growth in Australasia.
USA
Thailand
7