Product Catalog - Nason

TABLE OF CONTENTS 

L Series 

Pneumatic Cylinders 

Features 7 

How to Order 9 

Engineering Data 10 

12mm Bore 11 

20mm Bore 15 

25mm Bore 19 

28.5mm Bore 23 

32mm Bore 27 

40mm Bore 31 

50mm Bore 35 

63mm Bore 39 

76mm Bore 43 

101mm Bore 47 

127mm Bore 49 

152mm Bore 51 

Accessories 

Cylinders 

Solid State Limit Sensors 54 

Sensor Low Profile 55 

Sensor Receptacle 56 

Alignment Couplers 57 

Flange Mountings 58 

Pivot Mountings 60 

Rod End Options 61 

Urethane Shock Pads 62 

NEW 

bore size 

LC Series 

Non-rotating Load 

Carrying Cylinders 

Features 63 



12mm Bore 66 

20mm Bore 67 

25mm Bore 68 

28.5mm Bore 69 

32mm Bore 70 

40mm Bore 71 

50mm Bore 72 

63mm Bore 73

NEW 

product 

NEW 

product 

SC Series 

Stopper Cylinders 

Features 74 



20mm Bore 77 

25mm Bore 80 

32mm Bore 83 

40mm Bore 86 

50mm Bore 89 

Rod End Styles 92 

Flange Mount 93 

Rotary 

ACTUATORS 

NRF Series – Flange 108 

NRS Series – Shaft Output 117 

NEW 

bore size 

L 15 Series 

Hydraulic Cylinders 

Features 94 



20mm Bore 97 

25mm Bore 99 

32mm Bore 101 

40mm Bore 103 

50mm Bore 105 

Custom 

Cylinders 

Custom Products 126

NEW THINKING 

for better solutions

For more than 6 decades Nason has provided pneumatic and hydraulic 

pressure devices to the industrial, military, and mobile hydraulics fields. 

Over a decade ago, Nason took the knowledge gained from designing 

and manufacturing custom devices for harsh environments, limited 

space requirements, and quality, long life products and applied it to 

our newest product offerings, Pneumatic and Hydraulic Automation 

Products. We knew it would take the same commitments to quality that 

make our Pressure, Vacuum, and Temperature devices the standard bearer 

in the industry: quality people, quality materials, and quality designs. 

Privately owned and operated, Nason is located on 40 acres in Upstate 

South Carolina. Nason’s 50,000 square foot manufacturing facility features 

state of the art CNC manufacturing equipment as well as a fully staffed 

manual machinery department which allows Nason to react quickly to 

customer requirements. Nason’s cylinder line is designed around 15 

custom extrusions, of which over 6,000 feet is kept in raw stock ensure 

quick reaction to custom design and delivery requests. All cataloged 

product is kept in stock, in component form, for quick assembly 

and delivery. 

Nason’s Engineering Department is staffed with over 75 years of 

experience in the Pneumatic and Hydraulic fields. Utilizing the latest 

3D CAD software, Nason is fully staffed to meet your most demanding 

design requirements. 3D models as well as 2D prints of all Nason product 

lines are available for download from our website. Custom designs can be 

modeled and delivered quickly for insertion into your assembly models. 

Contact Nason for your next Automation need. Let us show you why 

we are the space saving engineered solutions leader.

SMALLER for greater savings 

Nason cylinders are small for more 

effective use of space but their compact 

package delivers the same power as larger 

competitive products. That means you 

can downsize without compromising 

power capacity. 

STRONGER for longer life 

Our cylinders provide significantly more 

cycles of productive service. We use 

aluminum or stainless-steel bar stock and 

we hone the bore until it has a mirror finish. 

This assures you longer seal and cylinder 

life, and better performance. 

NASON Cylinders at a Glance 

Compact design—more power in a 

smaller package 

Customized to your specifications 

Low breakaway and running friction 

100% precision-machined design 

Field rebuildable 

SMARTER for more flexibility 

Unlike some manufacturers who buy 

extruded stock with pre-drilled holes, we 

custom drill our cylinders. That way we can 

accommodate your design specifications 

for drilling patterns, hole/contour geometry, 

ports, and mountings. Plus, smarter means 

being flexible; small or large quantities, 

any specification, prototype availabily, and 

custom products and service. 

We believe there is a smarter way to 

assure quality as well. All Nason 

cylinders are made in America in our 

own manufacturing plant. No products 

or components are produced offshore.

Low-friction Nitrile seals, 

factory lubricated with PTFE 

impregnated grease 

Self-lubricating 

sintered bronze bearings 

Smooth exterior 

(no bolt together 

or retaining wire 

hole access) 

Hardened, 

double-wound 

302 stainless-steel 

retaining wires 

Low-friction 

cupseal with 

integral wiper (on 

specified models) 

Chrome-plated 

(303, 1045/1050 

stainless-steel rods 

Inch or metric 

mounting and 

porting (direct) 

Thick-walled, 

anodized aluminum 

caps and housings 

(machined bore) 

L SERIES 

Pneumatic Cylinders 

Low Breakaway and 

Running Friction / Long Life 

Designed for low start up and running 

friction, the L series contains low friction 

Nitrile seals and is lubricated at the 

factory with PTFE impregnated grease. 

Precision machined components and 

self-lubricating bearings ensure long life 

and continued low friction operation. 

Compact Size / Clean Design 

Nason L series cylinders were designed 

with today’s automation equipment in 

mind. They offer more power in a smaller 

package than comparable pancake or 

compact type cylinders. The smooth 

exterior of the cylinder body (no bolt 

together or retaining wire hole access) 

means no dirt or grease traps. 

Rugged Construction 

The L series incorporates thick walled, 

anodized aluminum housings and caps. 

Rods are chrome plated 303 stainless steel 

riding in self-lubricating bronze bearings 

and hardened 302 stainless steel retaining 

wires are used for assembly. 

Rebuildable 

All L series cylinders are field rebuildable. 

Versatile Design 

The L series cylinders are metric in design 

(bore and rod sizes). They are offered in 

inch or metric mounting and porting. Due 

to their 100% machined design they are 

easily customized by Nason. 

L SERIES

Individual Features 

Individual Features 

Double Acting, Single Rod 

Type “D” - Double Acting, Double Rod 

Model LS 

• Most compact of 

3 models 

Type “R” - Single Acting, Spring Extend 

Type “S” - Single Acting, Spring Retract 


Model LE 

• Extended internal rod 

bearing for additional 

load support 

• Integral seal and rod 

wiper 


Type “D” - Double Acting, Double Rod 

Model LH 

• Extended internal rod 

bearing for additional 

load support 

• Integral seal and rod 

wiper 

• Wear band added to 

piston for additional 

load support 

8

How to Order 

How to Order 

Example: 

Part Number: LH-32X50MB-EM-HSRS 

x 

LH 32 50 MB EM HS RS 

MODEL BORE STROKE MOUNTING 

OPTIONS 

TYPE MAGNETIC 

MODEL 

LS - Low Friction Standard Duty Cylinder 

LE - Low Friction Medium Duty Cylinder 

LH - Low Friction Heavy Duty Cylinder 

BORE 

12 - 12mm (.47") 

20 - 20mm (.79") 

25 - 25mm (.98") 

28.5 - 28.5mm (1.13") 

32 - 32mm (1.26") 

40 - 40mm (1.58") 

50 - 50mm (1.97") 

63 - 63mm (2.48") 

76 - 76mm (3.00") 

101 - 101mm (4.00") 

127 - 127mm (5.00") 

152 - 152mm (6.00") 

STROKE 

See Stroke Table 

TYPE 

BLANK (No Code) - Double Acting, Single Rod 

D - Double Acting, Double Rod 

S - Single Acting, Spring Retract 

R - Single Acting, Spring Extend 

MOUNTING 

MF - Threads on Front Face (Rod End) 

MR - Threads on Rear Face (Opposite Rod) 

MB - Threads on Both Faces 

MT - Drilled Through and Counterbored for Bolt Clearance 

(See product pages for stroke availability) 

MS - Threads on Side of Cylinder Body 

FF - Flange on Front Face (Rod End) 

FR - Flange on Rear Face (Opposite Rod) 

FS - Flange on Side of Cylinder Body 

PR - Pivot on Rear Face 

PL - Long Pivot 

MAGNETIC 

BLANK (No Code) - Standard "NO MAGNET" Piston 

M - Magnetic Piston and Sensor Mounting 

OPTIONS 

EM - InchThreads (Mounting and Ports) 

(See product pages for sizes) 

HS - High Temperature Seals -10∞C to 150∞C (0∞F to 302∞F) 

(Available on ì LEî and ì LHî Models Only) 

RE - Rod Eye 

RS - Male Stud for Rod End (Length - 2 x Thread Diameter) 

RF - 5mm (.197") Rod Extension 

RT - 10mm (.394") Rod Extension 

RV - 25mm (.984") Rod Extension 

SH - Hydraulic Option (35 Bar 500 PSI) Hydraulic Service 

(Not available on 12, 101, 127 and 152mm Bores) 

PE - Enlarged Ports 

(Available on 50, 63, 76, 101, 127 and 152mm Bores) 

UB - Urethane Shock Pads Both Ends 

(20 thru 76mm Bores) 

UF - Urethane Shock Pad Front (Rod End) 


UR - Urethane Shock Pad Rear (Opposite Rod) 


9

Engineering Data 

Piston Area Chart 

Bore Push Pull 

(Rod Extend) (Rod Retract) 

12 1,13 cm 2 (.18 in 2 ) 0,85 cm 2 (.14 in 2 ) 

20 3,14 cm 2 (.48 in 2 ) 2,64 cm 2 (.40 in 2 ) 

25 4,91 cm 2 (.76 in 2 ) 4,12 cm 2 (.64 in 2 ) 

28.5 6,41 cm 2 (1.0 in 2 ) 5.28 cm 2 (.82 in 2 ) 

32 8,04 cm 2 (1.25 in 2 ) 6,91 cm 2 (1.07 in 2 ) 

40 12,56 cm 2 (1.95 in 2 ) 10,55 cm 2 (1.64 in 2 ) 

50 19,63 cm 2 (3.04 in 2 ) 17,62 cm 2 (2.73 in 2 ) 

63 31,17 cm 2 (4.83 in 2 ) 28,03 cm 2 (4.34 in 2 ) 

76 45,6 cm 2 (7.07 in 2 ) 42,46 cm 2 (6.59 in 2 ) 

101 81,07 cm 2 (12.57 in 2 ) 77,93 cm 2 (12.09 in 2 ) 

127 126,7 cm 2 (19.6 in 2 ) 123,5 cm 2 (19.1 in 2 ) 

152 181,46 cm 2 (28.2 in 2 ) 176,55 cm 2 (27.45 in 2 ) 

Spring Forces (Type S,R) 

Bore Type Compressed 

Spring Force 

Spring Rate 

12 S,R 26.7 N (6 lbs) 0,6 N/mm (3.6 lbs/in) 

20 S,R 40 N (9 lbs) 0,9 N/mm (5.5 lbs/in) 

25 S,R 29.8 N (6.7 lbs) 0,6 N/mm (3.51 lbs/in) 

28.5 S,R 57.8 N (13.0 lbs) 1,31 N/mm (7.53 lbs/in) 

32 S,R 55.6 N (12.5 lbs) 1,31 N/mm (7.53 lbs/in) 

Operating Media: 

Air (Clean, Dry or Lubricated) 

Maximum Operating Pressure: 17 Bar (250 PSI) 

Operating Temperature: -10°C to 95°C (0°F to 200°F) 

Packing: 

Buna N 

Lubrication: 

PTFE impregnated grease 

Stroke Tolerance: +0.75mm/-0mm (+0.03"/-0") 

Cylinder Output Force Formula 

Piston Area x Pressure = Output Force 

Piston Area (in 2 ) x Pressure (PSI) = lbf (Pounds Force) 

Piston Area (cm 2 ) x Pressure (kg/cm 2 ) = kgf (Kilograms Force) 

Piston Area (cm 2 ) x Pressure (kg/cm 2 ) x 9.8 = Newtons 

Piston Area (cm 2 ) x Pressure (Bar) x 10 = Newtons 

Piston Area (cm 2 ) x Pressure (Bar) x 1.02 = kgf (Kilograms Force) 

Stock Stroke Table 

Model LS Model LE Model LH 

Single Rod, Double Rod Spring Extend, 

Single Rod, 

Single Rod 

Spring Retract 

Double Rod 

Bore 

Standard Stroke Lengths 

12 

20 

25 

10, 15, 20, 25, 30, 

35, 40, 45, 50 

5, 10, 15, 20, 25 

5, 10, 15, 20, 25, 30, 35, 40, 45, 50 

5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 65, 75, 90, 100 

28.5 

6.35, 12.7, 19.05, 25.4, 

31.75, 38.1, 44.45, 50.8, 

63.5, 76.2, 88.9, 101.6 

6.35, 12.7, 19.05, 

25.4 

6.35, 12.7, 19.05, 25.4, 31.75, 38.1, 44.45, 

50.8, 63.5, 76.2, 88.9, 101.6 

32 

5, 10, 15, 20, 25 

40 

50 

63 

76 

101 

10, 15, 20, 25, 30, 35, 40, 

45, 50, 65, 75, 90, 100 

N/A – 40mm Bore 

and Higher 

5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 65, 75, 90, 100 

127 

152 

Note: Stroke lengths are in millimeters. Enter stroke code above in appropriate place in part number. 5mm stroke not available as standard in LS model due to fitting interference. 

Contact the factory if a 5mm stroke is required in the LS model as this can be accomplished by special port locations. Other strokes available upon special order. 

10

12mm (1/2") Bore 

Non Magnetic 

Front Mount Cylinder "MF" 

MODEL 

LS 

LE 

LH 

LS 

TYPE 

- 

- 

- 

S,R 

STANDARD STROKES 

10mm - 50mm 

5mm - 50mm 

5mm - 50mm 

5mm - 25mm 

"A" 

16,0(0.63") 

21,0(0.83") 

26,0(1.03") 

31,0(1.22") 

PISTON AREA 

PUSH 1,13 cm ² (0.18 in ² ) 

PULL 0,85 cm ² (0.14 in ² ) 

"B" 

"C" 

"D" 

Standard Threads 

M5X0,8 

"EM" Option 

#10-32 

M4X0,7 #8-32 

M4X0,7 #8-32 

20,0 SQ.(.787") 

2,5(.098") 

"A" + STROKE 

3,25(.128") 

3,25(.128") 

W 

13,5(.531") 

3,0(.118") 

6,4(.25") 

(2 PLACES) 

4,1(.16") 

Rear Mount Cylinder "MR" 

W 

13,5(.531") 

MODEL 

LS 

LE 

LH 

LS 

TYPE 

- 

- 

- 

S,R 

Z 

Y 

X 

"D" TAP X 10,2(.40") DP 

(2 PLACES) 


10mm - 20mm 

5mm - 15mm 

5mm - 10mm 

5mm 

20,0 SQ.(.787") 

3,25(.128") 

3,25(.128") 

6,0(Ø.236") ROD 

"C" TAP 

Non Magnetic 

Thru Mount Cylinder "MT" 

"A" 

16,0(0.63") 

21,0(0.83") 

26,0(1.03") 

31,0(1.22") 

W 

PISTON AREA 

PUSH 1,13 cm ² (0.18 in ² ) 

PULL 0,85 cm ² (0.14 in ² ) 

2,5(.098") 

13,5(.531") 

3,0(.118") 

"B" PORT 

(2 PLACES) 

"A" + STROKE 

"B" 

"C" 

Mount Both End Cylinder "MB" 

Z 

W 

Y 

X 

Standard Threads "EM" Option 

M5X0,8 #10-32 

M4X0,7 #8-32 

6,4(.25") 

(2 PLACES) 

4,1(.16") 

X 

Y 

Z 

13,5(.531") 

Z 

X 

Y 

6,0(Ø.236) ROD 

"C" TAP 

3,5 DIA.(Ø.136") DRILL THRU 

(2 PLACES) 

5,6 DIA.(Ø.22") C'BORE X 5,0(.20") DP 

(4 PLACES, 2 PER FACE) 

"B" PORT 

(2 PLACES) 

12 

x 

MODEL BORE STROKE TYPE MOUNTING OPTIONS 

LS 

LE 

EM - INCH THREADS & PORT OPTIONS 

LH 

HS - HIGH TEMPERATURE SEALS OPTION: 

5mm - 50mm STROKE 

AVAILABLE ON LE AND LH MODELS ONLY 

(SEE STROKE RANGE) 

(SEE PAGE 62) 

BLANK - NO CODE, DOUBLE 

ACTING, SINGLE ROD 

S - SINGLE ACTING, SPRING RETRACT 

R - SINGLE ACTING, SPRING EXTEND 

MT - THRU MOUNT 

MF - FRONT MOUNT 

MR - REAR MOUNT 

MB - BOTH END MOUNTS 

FF - FRONT FLANGE 

FR - REAR FLANGE 

(FOR FLANGES SEE PAGE 58) 

PR - REAR PIVOT 

(FOR PIVOT SEE PAGE 60) 

RE - ROD EYE 

(SEE PAGE 61) 

RS - MALE STUD FOR ROD END 

(SEE PAGE 61) 

RF, RH, RN, RT, RV, RY - ROD EXTENSIONS 

(SEE PAGE 61) 

11

12mm (1/2") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

- 

- 

- 

S,R 


10mm - 50mm 

5mm - 50mm 

5mm - 50mm 

5mm - 25mm 

"A" 

26,0(1.03") 

31,0(1.23") 

36,0(1.42") 

41,0(1.62") 

PISTON AREA 

PUSH 1,13 cm ² (0.18 in ² ) 

PULL 0,85 cm ² (0.14 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 #10-32 

M4X0,7 #8-32 

M4X0,7 #8-32 

20,0 SQ.(.787") 

3,25(.128") 

13,5(.531") 

MODEL 

LS 

LE 

3,25(.128") 

Z 

TYPE 

- 

- 

W 

Y 

X 

2,5(.098") 

13,5(.531") 

"D" TAP X 10,2(.40") DP 

(2 PLACES) 

5mm 

6,0(Ø.236") ROD 

"C" TAP 

Magnetic 


STANDARD STROKES "A" 

10mm 26,0(1.03") 

31,0(1.23") 

3,0(.118") 

SENSOR MOUNTING 

TRACK 

(2 PLACES) 

"A" + STROKE 

PISTON AREA 

PUSH 1,13 cm ² (0.18 in ² ) 

PULL 0,85 cm ² (0.14 in ² ) 

"B" PORT 

(2 PLACES) 

6,4(.25") 

(2 PLACES) 

4,1(.16") 

"B" 

"C" 



Z 

W 

Y 

X 


M5X0,8 #10-32 

M4X0,7 #8-32 

X 

W 

Y 

Z 

20,0 SQ.(.787") 

2,5(.098") 

"A" + STROKE 

3,25(.128") 

3,25(.128") 

W 

13,5(.531") 

SENSOR MOUNTING TRACK 

(2 PLACES) 

3,0(.118") 

6,4(.25") 

(2 PLACES) 

4,1(.16") 

13,5(.531") 

Z 

X 

Y 

6,0(Ø.236) ROD 

"C" TAP 

3,5 DIA.(Ø.136") DRILL THRU 

(2 PLACES) 

5,6 DIA.(Ø.22") C'BORE X 5,0(.20") DP 


"B" PORT 

(2 PLACES) 

12 

x 

12 

M 

SENSORS SOLD SEPERATELY 

SKS, SKP, SCS, SCP - SOLID STATE 

MODEL BORE STROKE TYPE MOUNTING MAGNETIC OPTIONS 

LIMIT SENSORS (SEE PAGE 54) 

LS 

LE 

LH 








(SEE PAGE 62) 



RE - ROD EYE 

(SEE PAGE 61) 





(SEE PAGE 61) 






(FOR PIVOT SEE PAGE 60) 


(SEE PAGE 61)

12mm (1/2") Bore 

Magnetic 

Side Mount Cylinder "MS" 

MODEL 

LS 

LE 

TYPE 

- 

- 


10mm 

5mm 

"A" 

26,0(1.03") 

31,0(1.23") 

PISTON AREA 

PUSH 1,13 cm ² (0.18 in ² ) 

PULL 0,85 cm ² (0.14 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 #10-32 

M4X0,7 #8-32 

M3X0,5 #4-40 

6,4(.25") 

(2 PLACES) 

"A" 

+ STROKE 

2,5(.098") 

20,0 SQ. 

(.787") 

Y 


TRACK 

(2 PLACES) 

3,0(.118") 

8,0(.315") 

3,0(.118") 

X 

Z 

14,0(.551") 

4,1(.16") 

Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

- 

- 

- 

S,R 

"B" PORT 

(2 PLACES) 


15mm - 50mm 

10mm - 50mm 

5mm - 50mm 

5mm - 25mm 

"A" 

26,0(1.03") 

31,0(1.23") 

36,0(1.42") 

41,0(1.62") 

W 

6,0(Ø.236") ROD 

"C" TAP 

PISTON AREA 

PUSH 1,13 cm ² (0.18 in ² ) 

PULL 0,85 cm ² (0.14 in ² ) 

"B" 

"C" 

"D" 

"D" TAP X 4,5(.18") DP 

(2 PLACES) 


M5X0,8 #10-32 

M4X0,7 #8-32 

M3X0,5 #4-40 

"A" + STROKE 

6,4(.25") 

(2 PLACES) 

2,5(.098") 

20,0 SQ. 

(.787") 

Y 

3,0(.118") 

3,0(.118") 

8,0(.315") 

8,0(.315") 

X 

Z 

14,0(.551") 

4,1(.16") 

"B" PORT 

(2 PLACES) 

W 

6,0(Ø.236") ROD 

"C" TAP 


TRACK 

(2 PLACES) 

"D" TAP X 4,5(.18") DP 

(4 PLACES) 

12 

x 


LS 

LE 

LH 

M 










MS - SIDE MOUNT 

FE - FLANGE ON END 

FS - FLANGE ON SIDE 

(SEE PAGE 59) 




(SEE PAGE 62) 

RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 

13

12mm (1/2") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

- 

- 

- 

S,R 


10mm - 20mm 

5mm - 15mm 

5mm - 10mm 

5mm 

"A" 

16,0(0.63") 

21,0(0.83") 

26,0(1.03") 

31,0(1.22") 

PISTON AREA 

PUSH 1,13 cm ² (0.18 in ² ) 

PULL 0,85 cm ² (0.14 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 

"EM" Option 

#10-32 

M4X0,7 #8-32 

M3X0,5 #4-40 

6,4(.25") 

"A" 

+ STROKE 

2,5(.098") 

20,0 SQ. 

(.787") 

Y 

3,0(.118") 

3,0(.118") 

8,0(.315") 

X 

Z 

14,0(.551") 

4,1(.16") 

"B" PORT 

(2 PLACES) 

W 

6,0(Ø.236") ROD 

"C" TAP 

"D" TAP X 4,5 DP 

(2 PLACES) 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

- 

- 

- 

S,R 


25mm - 50mm 

20mm - 50mm 

15mm - 50mm 

10mm - 25mm 

"A" 

16,0(0.63") 

21,0(0.83") 

26,0(1.03") 

31,0(1.22") 

PISTON AREA 

PUSH 1,13 cm ² (0.18 in ² ) 

PULL 0,85 cm ² (0.14 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 #10-32 

M4X0,7 #8-32 

M3X0,5 #4-40 

"A" + STROKE 

6,4(.25") 

(2 PLACES) 

2,5(.098") 

20,0 SQ. 

(.787") 

Y 

3,0(.118") 

3,0(.118") 

8,0(.315") 

8,0(.315") 

X 

Z 

14,0(.551") 

4,1(.16") 

"B" PORT 

(2 PLACES) 

W 

6,0(Ø.236") ROD 

"C" TAP 

"D" TAP X 4,5(.18") DP 

(4 PLACES) 

14 

12 

x 


LS 

LE 


LH 




(SEE PAGE 62) 


RE - ROD EYE 

(SEE PAGE 61) 




(SEE PAGE 61) 






(SEE PAGE 59) 


(SEE PAGE 61)

20mm (3/4") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

4,5(.177") 

TYPE 

_,D 

- 

_,D 

S,R 


10mm - 50mm 

5mm - 100mm 

5mm - 100mm 

5mm - 25mm 

4,5(.177") 

30,0(1.181") 

SQ. 

21,0 

(.827") 

W 

"A" 

18,5(0.73") 

23,5(0.93") 

28,5(1.12") 

33,5(1.32") 

PISTON AREA 

PUSH 3,14 cm ² (0.48 in ² ) 

PULL 2,64 cm ² (0.40 in ² ) 

3,0(.118") "A" + STROKE 

6,9(.272") 

(2 PLACES) 

"B" 

"C" 

"D" 


M5X0,8 #10-32 

M5X0,8 #10-32 

M5X0,8 #10-32 

TYPE D 

3,0(.118") 

+ STROKE 

21,0(.827") 

Z 

X 

5,6(.220") 

Y 

8,0(Ø.315) ROD 

"C" TAP 

"D" TAP X 12,7(.50") DP 

(2 PLACES) 

"B" PORT 

(2 PLACES) 


W 


W 

X 

Z 

Z 

X 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

4,5(.177") 

TYPE 

_,D 

- 

_,D 

S,R 

4,5(.177") 


10mm - 25mm 

5mm - 20mm 

5mm - 15mm 

5mm - 10mm 

30,0(1.181") 

SQ. 

21,0 

(.827") 

W 

"A" 

18,5(0.73") 

23,5(0.93") 

28,5(1.12") 

33,5(1.32") 

PISTON AREA 

PUSH 3,14 cm ² (0.48 in ² ) 

PULL 2,64 cm ² (0.40 in ² ) 

3,0(.118") "A" + STROKE 

6,9(.272") 

(2 PLACES) 

Y 

"B" 

"C" 

Y 


M5X0,8 #10-32 

M5X0,8 #10-32 

TYPE D 

3,0(.118") 

+ STROKE 

21,0(.827") 

Z 

X 

5,6(.220") 

Y 

8,0(Ø.315) ROD 

"C" TAP 

4,2(Ø.165") DRILL THRU 

(2 PLACES) 

7,6(Ø.300) C'BORE X 4,5(.177") DP. 


"B" PORT 

(2 PLACES) 

20 

x 


LS 

LE 


LH 





(SEE PAGE 62) 



RE - ROD EYE 

(SEE PAGE 61) 

D - DOUBLE ACTING, DOUBLE ROD 




(SEE PAGE 61) 









PL - LONG PIVOT 

(FOR PIVOTS SEE PAGE 60) 


(SEE PAGE 61) 

SH - HYDRAULIC OPTION (35 BAR 500 PSI) 

(SEE PAGE 62) 

UB, UF, UR - URETHANE SHOCK PAD OPTION 

(SEE PAGE 62) 

15

20mm (3/4") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

_,D 

_ 

_,D 

S,R 


10mm - 50mm 

5mm - 100mm 

5mm - 100mm 

5mm - 25mm 

"A" 

23,5(0.93") 

28,5(1.12") 

33,5(1.32") 

38,5(1.52") 

PISTON AREA 

PUSH 3,14 cm ² (0.48 in ² ) 

PULL 2,64 cm ² (0.40 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 

"EM" Option 

#10-32 

M5X0,8 #10-32 

M5X0,8 #10-32 

4,5(.177") 

30,0(1.181") 

SQ. 

21,0 

(.827") 

3,0(.118") "A" + STROKE 

6,9(.272") 

(2 PLACES) 

TYPE D 

3,0(.118") 

+ STROKE 

4,5(.177") 

W 


TRACK 

(2 PLACES) 

21,0(.827") 

Z 

X 

5,6(.220") 

Y 

8,0(Ø.315) ROD 

"C" TAP 

"D" TAP X 12,7(.50") DP 

(2 PLACES) 

"B" PORT 

(2 PLACES) 


W 


W 

X 

Z 

Z 

X 

Magnetic 


MODEL 

LS 

LE 

LH 

LS 

4,5(.177") 

TYPE 

_,D 

_ 

_,D 

S,R 


10mm - 20mm 

5mm - 15mm 

5mm - 10mm 

5mm 

4,5(.177") 

30,0(1.181") 

SQ. 

21,0 

(.827") 

W 

"A" 

23,5(0.93") 

28,5(1.12") 

33,5(1.32") 

38,5(1.52") 

PISTON AREA 

PUSH 3,14 cm ² (0.48 in ² ) 

PULL 2,64 cm ² (0.40 in ² ) 


TRACK 

(2 PLACES) 

3,0(.118") "A" + STROKE 

6,9(.272") 

(2 PLACES) 

Y 

"B" 

"C" 

Y 


M5X0,8 #10-32 

M5X0,8 #10-32 

TYPE D 

3,0(.118") 

+ STROKE 

21,0(.827") 

Z 

X 

5,6(.220") 

Y 

8,0(Ø.315) ROD 

"C" TAP 

4,2(Ø.165") DRILL THRU (2 PLACES) 

7,6(Ø.300) C'BORE X 4,5(.177") DP. 


"B" PORT 

(2 PLACES) 

16 

x 

20 

M 





LS 

LE 


LH 





(SEE PAGE 62) 



RE - ROD EYE 


(SEE PAGE 61) 














(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

20mm (3/4") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 

TYPE STANDARD STROKES "A" PISTON AREA Standard Threads "EM" Option 

_,D 10mm - 15mm 23,5(0.93") 

PUSH 3,14 cm ² (0.48 in ² ) 

"B" M5X0,8 #10-32 

_ 5mm - 10mm 28,5(1.12") 

"C" M5X0,8 #10-32 

_,D 5mm 33,5(1.32") PULL 2,64 cm ² (0.40 in ² ) 

"D" M4X0,7 #8-32 

TYPE D 

3,0(.118") 

+ STROKE 

"A" 

+ STROKE 

3,0(.118") 

30,0(1.181") 

SQ. 

10,0(.394") 

Y 

4,5(.177") 

X 

Z 

21,0(.827") 

5,6(.220") 

6,9(.272") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

8,0(Ø.315) ROD 

"C" TAP 


TRACK 

(2 PLACES) 

"D" TAP X 6,0(.24") DP. 

(2 PLACES) 

Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

_,D 

_ 

_,D 

S,R 


20mm - 50mm 

15mm - 100mm 

10mm - 100mm 

5mm - 25mm 

"A" 

23,5(0.93") 

28,5(1.12") 

33,5(1.32") 

38,5(1.52") 

PISTON AREA 

PUSH 3,14 cm ² (0.48 in ² ) 

PULL 2,64 cm ² (0.40 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 

"EM" Option 

#10-32 

M5X0,8 #10-32 

M4X0,7 #8-32 

TYPE D 

3,0(.118") 

+ STK. 

"A" 

+ STROKE 

3,0(.118") 

30,0(1.181") 

SQ. 

10,0(.394") 

10,0(.394") 

Y 

4,5(.177") 

X 

Z 

21,0(.827") 

5,6(.220") 

6,9(.272") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

8,0(Ø.315) ROD 

"C" TAP 


TRACK 

(2 PLACES) 

"D" TAP X 6,0(.24") DP. 

(4 PLACES) 

20 


x 

M 




LS 

LE 

LH 





(SEE PAGE 62) 


RE - ROD EYE 

(SEE PAGE 61) 









(SEE PAGE 59) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

17

20mm (3/4") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

_,D 

_ 

_,D 

S,R 


10mm - 20mm 

5mm - 15mm 

5mm - 10mm 

5mm 

"A" 

18,5(0.73") 

23,5(0.93") 

28,5(1.12") 

33,5(1.32") 

PISTON AREA 

PUSH 3,14 cm ² (0.48 in ² ) 

PULL 2,64 cm ² (0.40 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 #10-32 

M5X0,8 #10-32 

M4X0,7 #8-32 

TYPE D 

3,0(.118") 

+ STROKE 

"A" 

+ STROKE 

3,0(.118") 

30,0(1.181") 

SQ. 

10,0(.394") 

Y 

4,5(.177") 

X 

Z 

21,0(.827") 

5,6(.220") 

6,9(.272") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

8,0(Ø.315) ROD 

"C" TAP 

"D" TAP X 6,0(.24") DP. 

(2 PLACES) 

Non Magnetic 


MODEL TYPE STANDARD STROKES "A" 

PISTON AREA 

LS 

LH 

_,D 

_,D 

25mm - 50mm 

15mm - 100mm 

18,5(0.73") 

28,5(1.12") 

LE 

LS 

_ 

S,R 

20mm - 100mm 

10mm - 25mm 

23,5(0.93") 

33,5(1.32") 

PUSH 3,14 cm ² (0.48 in ² ) 

PULL 2,64 cm ² (0.40 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 

"EM" Option 

#10-32 

M5X0,8 #10-32 

M4X0,7 #8-32 

TYPE D 

3,0(.118") 

+ STK. 

"A" 

+ STROKE 

3,0(.118") 

30,0(1.181") 

SQ. 

10,0(.394") 

10,0(.394") 

Y 

4,5(.177") 

X 

Z 

21,0(.827") 

5,6(.220") 

6,9(.272") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

8,0(Ø.315) ROD 

"C" TAP 

"D" TAP X 6,0(.24") DP. 

(4 PLACES) 

18 

20 

x 


LS 

LE 


LH 





(SEE PAGE 62) 

RE - ROD EYE 


(SEE PAGE 61) 



(SEE PAGE 61) 







(SEE PAGE 59) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

25mm (1.0") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

_,D 

_ 

_,D 

S,R 


10mm - 50mm 

5mm - 100mm 

5mm - 100mm 

5mm - 25mm 

"A" 

19,0(0.75") 

24,0(0.95") 

29,0(1.14") 

34,0(1.34") 

PISTON AREA 

PUSH 4,91 cm ² (0.76 in ² ) 

PULL 4,12 cm ² (0.64 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 #10-32 

M5X0,8 #10-32 

M5X0,8 #10-32 

35,0(1.378") 

SQ. 

"A" 

+ STROKE 

TYPE D 

5,0(.197") 

+ STK. 

4,75(.187") 

4,75(.187") 

25,4 

(1.00") 

W 

5,0(.197") 

6,9(.272") 

(2 PLACES) 


X 

W 

Z 

25.4 

(1.00") 

Z 

X 

6,1(.240") 


W 

Y 

10,0(Ø.394") ROD 

"C" TAP 

Non Magnetic 


Y 

"D" TAP X 12,7(.50") DP 

(2 PLACES) 

MODEL TYPE STANDARD STROKES "A" PISTON AREA 

LS 

LH 

_,D 

_,D 

10mm - 25mm 

5mm - 15mm 

19,0(0.75") 

29,0(1.14") 

LE 

LS 

_ 

S,R 

5mm - 20mm 

5mm - 10mm 

24,0(0.95") 

34,0(1.34") 

PUSH 4,91 cm ² (0.76 in ² ) 

PULL 4,12 cm ² (0.64 in ² ) 

"B" PORT 

(2 PLACES) 

"B" 

"C" 

Z 

X 

Y 


M5X0,8 #10-32 

M5X0,8 #10-32 

4,75(.187") 

35,0(1.378") 

SQ. 

25,4 

(1.00") 

5,0(.197") 

6,9(.272") 

(2 PLACES) 

"A" 

+ STROKE 

TYPE D 

5,0(.197") 

+ STK. 

4,75(.187") 

W 

25.4 

(1.00") 

Z 

X 

6,1(.240") 


(2 PLACES) 

7,6(Ø.300) C'BORE X 4,5(.177") DP. 


Y 

10,0(Ø.394") ROD 

"C" TAP 

"B" PORT 

(2 PLACES) 

25 

x 


LS 

LE 


LH 




(SEE PAGE 62) 


PE - PORT ENLARGEMENT (AVAILABLE W/ 


“EM” OPTION ONLY = 1/8-27 NPT PORTS) 















RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

19

25mm (1.0") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

_,D 

_ 

_,D 

S,R 


TRACK 

(2 PLACES) 

4,75(.187") 


10mm - 50mm 

5mm - 100mm 

5mm - 100mm 

5mm - 25mm 

35,0(1.378") 

SQ. 

25,4 

(1.00") 

"A" 

24,0(0.95") 

29,0(1.14") 

34,0(1.34") 

39,0(1.54") 

5,0(.197") 

PISTON AREA 

PUSH 4,91 cm ² (0.76 in ² ) 

PULL 4,12 cm ² (0.64 in ² ) 

6,9(.272") 

(2 PLACES) 

"A" 

+ STROKE 

"B" 

"C" 

"D" 


M5X0,8 #10-32 

M5X0,8 #10-32 

M5X0,8 #10-32 

TYPE D 

5,0(.197") 

+ STK. 


W 

4,75(.187") 

W 

X 

Z 

25.4 

(1.00") 

Z 

X 

6,1(.240") 


W 

Y 

Magnetic 


MODEL 

LS 

LE 

LH 

LS 

10,0(Ø.394") ROD 

"C" TAP 

Y 

"D" TAP X 12,7(.50") DP 

(2 PLACES) 

TYPE STANDARD STROKES "A" PISTON AREA 

_,D 

_,D 

10mm - 20mm 

5mm - 10mm 

24,0(0.95") 

34,0(1.34") 

_ 

S,R 

5mm - 15mm 

5mm 

29,0(1.14") 

39,0(1.54") 

PUSH 4,91 cm ² (0.76 in ² ) 

PULL 4,12 cm ² (0.64 in ² ) 


TRACK 

(2 PLACES) 

4,75(.187") 

35,0(1.378") 

SQ. 

25,4 

(1.00") 

5,0(.197") 

6,9(.272") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

"B" 

"C" 

Z 

Y 


M5X0,8 #10-32 

M5X0,8 #10-32 

"A" 

+ STROKE 

X 

TYPE D 

5,0(.197") 

+ STK. 

4,75(.187") 

W 

25.4 

(1.00") 

Z 

X 

6,1(.240") 


(2 PLACES) 

7,6(Ø.300) C'BORE X 4,5(.177") DP. 


Y 

10,0(Ø.394") ROD 

"C" TAP 

"B" PORT 

(2 PLACES) 

20 

x 


25 

M 




LS 

LE 


LH 





(SEE PAGE 62) 


















RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

25mm (1.0") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 



_,D 10mm - 15mm 24,0(0.95") 

"B" M5X0,8 #10-32 

PUSH 4,91 cm ² (0.76 in ² ) 

_ 5mm - 10mm 29,0(1.14") 

"C" M5X0,8 #10-32 

_,D 5mm 34,0(1.34") PULL 4,12 cm ² (0.64 in ² ) 

"D" M5X0,8 #10-32 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0(.197") 

35,0(1.378") 

SQ. 

Y 

4,75(.187") 

10,0(.394") 

X 

Z 

25,4(1.00") 

6,1(.240") 

6,9(.272") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

10,0(Ø.394") ROD 

"C" TAP 


TRACK 

(2 PLACES) 

"D" TAP X 7,5(.30") DP. 

(2 PLACES) 

Magnetic 



LS 

LH 

_,D 

_,D 

20mm - 50mm 

10mm - 100mm 

24,0(0.95") 

34,0(1.34") 

LE 

LS 

_ 

S,R 

15mm - 100mm 

5mm - 25mm 

29,0(1.14") 

39,0(1.54") 

PUSH 4,91 cm ² (0.76 in ² ) 

PULL 4,12 cm ² (0.64 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 #10-32 

M5X0,8 #10-32 

M5X0,8 #10-32 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

35,0(1.378") 

SQ. 

10,0 

(.394") 

10,0 

(.394") 

Y 

4,75 

(.187") 

X 

Z 

25,4(1.00") 

6,1(.240") 

6,9(.272") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

10,0(Ø.394") ROD 

"C" TAP 


TRACK 

(2 PLACES) 

"D" TAP X 7,5(.30") DP. 

(4 PLACES) 

25 


x 

M 




LS 

LE 


LH 




(SEE PAGE 62) 












(SEE PAGE 59) 

RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

21

25mm (1.0") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

_,D 

_ 

_,D 

S,R 


10mm - 20mm 

5mm - 15mm 

5mm - 10mm 

5mm 

"A" 

19,0(0.75") 

24,0(0.95") 

29,0(1.14") 

34,0(1.34") 

PISTON AREA 

PUSH 4,91 cm ² (0.76 in ² ) 

PULL 4,12 cm ² (0.64 in ² ) 

"B" 

"C" 

"D" 


M5X0,8 #10-32 

M5X0,8 #10-32 

M5X0,8 #10-32 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0(.197") 

35,0(1.378") 

SQ. 

Y 

4,75(.187") 

10,0(.394") 

X 

Z 

25,4(1.00") 

6,1(.240") 

6,9(.272") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

10,0(Ø.394") ROD 

"C" TAP 

"D" TAP X 7,5(.30") DP. 

(2 PLACES) 

Non Magnetic 



LS 

LH 

_,D 

_,D 

25mm - 50mm 

15mm - 100mm 

19,0(0.75") 

29,0(1.14") 

LE 

LS 

_ 

S,R 

20mm - 100mm 

10mm - 25mm 

24,0(0.95") 

34,0(1.34") 

PUSH 4,91 cm ² (0.76 in ² ) 

PULL 4,12 cm ² (0.64 in ² ) 


"B" M5X0,8 #10-32 

"C" M5X0,8 #10-32 

"D" M5X0,8 #10-32 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

35,0(1.378") 

SQ. 

10,0 

(.394") 

10,0 

(.394") 

Y 

4,75 

(.187") 

X 

Z 

25,4(1.00") 

6,1(.240") 

6,9(.272") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

10,0(Ø.394") ROD 

"C" TAP 

"D" TAP X 7,5(.30") DP. 

(4 PLACES) 

22 

25 

x 


LS 

LE 


LH 



(SEE PAGE 62) 













(SEE PAGE 59) 

RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

28,5mm (1-1/8") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

_,D 

_ 

_,D 

S,R 


6,35mm - 101,6mm 

6,35mm - 101,6mm 

6,35mm - 101,6mm 

6,35mm - 25,4mm 

"A" 

19,05(.75") 

25,4(1.00") 

31,75(1.25") 

31,75(1.25") 

PISTON AREA 

PUSH 6,41 cm ² (1.0 in ² ) 

PULL 5,28 cm ² (0.82 in ² ) 

4,75(.187") 

38,1(1.500") 

SQ. 

28,6 

(1.125") 

3,2 

(.125") 

7,1(.280") 

(2 PLACES) 

"A" 

+ STROKE 

TYPE D 

3,2(.125") 

+ STK. 


W 

4,75(.187") 

W 

X 

Z 

28,6(1.125") 

Z 

X 

6,4(.250") 


W 

Y 

Z 

X 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

12,0(Ø.472") ROD 

5/16-18 TAP 

TYPE 

_,D 

_ 

_,D 

S,R 


6,35mm - 25,4mm 

6,35mm - 19,05mm 

6,35mm - 12,7mm 

6,35mm - 12,7mm 

Y 

1/4-20 TAP X .63 DP 

(2 PLACES) 

"A" 

19,05(.75") 

25,4(1.00") 

31,75(1.25") 

31,75(1.25") 

PISTON AREA 

PUSH 6,41 cm ² (1.0 in ² ) 

PULL 5,28 cm ² (0.82 in ² ) 

1/8-27 PORT 

(2 PLACES) 

Y 

4,75(.187") 

38,1(1.500") 

SQ. 

28,6 

(1.125") 

3,2 

(.125") 

7,1(.280") 

(2 PLACES) 

"A" 

+ STROKE 

TYPE D 

3,2(.125") 

+ STK. 

4,75(.187") 

W 

6,4(.250") 

28,6(1.125") 

Z 

X 

12,0(Ø.472") ROD 

5/16-18 TAP 

Y 


(2 PLACES) 

8,5(Ø.334") C'BORE X 5,3(.210") DP 


1/8-27 PORT 

(2 PLACES) 

28,5 

x 


LS 

LE 


LH 


(SEE PAGE 62) 

6,35mm - 101,6mm STROKE 

RE - ROD EYE 


(SEE PAGE 61) 




(SEE PAGE 61) 




(SEE PAGE 61) 













(SEE PAGE 62) 


(SEE PAGE 62) 

23

28,5mm (1-1/8") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

_,D 

_ 

_,D 

S,R 


6,35mm - 101,6mm 

6,35mm - 101,6mm 

6,35mm - 101,6mm 

6,35mm - 25,4mm 

38,1(1.500") 

SQ. 

"A" 

25,4(1.00") 

31,75(1.25") 

38,1(1.50") 

38,1(1.50") 

PISTON AREA 

PUSH 6,41 cm ² (1.0 in ² ) 

PULL 5,28 cm ² (0.82 in ² ) 

3,2 

(.125") 

"A" 

+ STROKE 

TYPE D 

3,2(.125") 

+ STK. 

4,75(.187") 

28,6 

(1.125") 

7,1(.280") 

(2 PLACES) 


W 

4,75(.187") 

W 

X 

Z 

28,6(1.125") 

Z 

X 

6,4(.250") 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 


W 

Y 

12,0(Ø.472") ROD 

5/16-18 TAP 

Y 

1/4-20 TAP X .63 DP 

(2 PLACES) 

1/8-27 PORT 

(2 PLACES) 

Z 

X 

Y 

Magnetic 



LS 

LH 

_,D 

_,D 

6,35mm - 19,05mm 

6,35mm 

25,4(1.00") 

38,1(1.50") 

LE 

LS 

_ 

S,R 

6,35mm - 12,7mm 

6,35mm 

31,75(1.25") 

38,1(1.50") 

PUSH 6,41 cm ² (1.0 in ² ) 

PULL 5,28 cm ² (0.82 in ² ) 

4,75(.187") 

38,1(1.500") 

SQ. 

28,6 

(1.125") 

3,2 

(.125") 

7,1(.280") 

(2 PLACES) 

"A" 

+ STROKE 

TYPE D 

3,2(.125") 

+ STK. 

4,75(.187") 

W 

28,6(1.125") 

Z 

X 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

6,4(.250") 

12,0(Ø.472") ROD 

5/16-18 TAP 

Y 


(2 PLACES) 

8,5(Ø.334") C'BORE X 5,3(.210") DP 


1/8-27 PORT 

(2 PLACES) 

24 

28,5 


x 

M 




LS 

LE 

LH 




(SEE PAGE 62) 


RE - ROD EYE 


(SEE PAGE 61) 



(SEE PAGE 61) 















(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

28,5mm (1-1/8") Bore 

Magnetic 


MODEL 

LS 

LE 


_,D 6,35mm - 12,7mm 25,4(1.00") PUSH 6,41 cm ² (1.0 in ² ) 

_ 6,35mm 31,75(1.25") PULL 5,28 cm ² (0.82 in ² ) 

TYPE D 

3,2(.125") 

+ STK. 

"A" 

+ STROKE 

3,2 

(.125") 

38,1(1.500") 

SQ. 

Y 

4,75 

(.187") 

9,5(.375") 

X 

Z 

28,6(1.125") 

6,4(.250") 

7,1(.280") 

(2 PLACES) 

1/8-27 PORT 

(2 PLACES) 

Magnetic 


12,0(Ø.472") ROD 

5/16-18 TAP 


LS _,D 19,05mm - 101,6mm 25.4(1.00") 

PUSH 6,41 cm 

LE _ 12,7mm - 101,6mm 31,75(1.25") 

² (1.0 in ² ) 

LH _,D 6,35mm - 101,6mm 38,1(1.50") 

PULL 5,28 cm ² (0.82 in ² ) 

LS S,R 6,35mm - 25,4mm 38,1(1.50") 

W 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

#10-24 TAP X .31 DP 

(2 PLACES) 

TYPE D 

3,2(.125") 

+ STK. 

"A" 

+ STROKE 

3,2 

(.125) 

38,1(1.500") 

SQ. 

Y 

4,75 

(.187") 

9,5(.375") 

9,5(.375") 

X 

Z 

28,6(1.125") 

6,4(.250") 

7,1(.280") 

(2 PLACES) 

1/8-27 PORT 

(2 PLACES) 

W 

12,0(Ø.472") ROD 

5/16-18 TAP 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

#10-24 TAP X .31 DP 

(4 PLACES) 

x 

28.5 

M 



MODEL BORE STROKE TYPE MOUNTING MAGNETIC OPTIONS LIMIT SENSORS (SEE PAGE 54) 

LS 

LE 

LH 



6.35mm - 101.6mm STROKE 


(SEE PAGE 62) 

RE - ROD EYE 

(SEE PAGE 61) 




(SEE PAGE 61) 







(SEE PAGE 59) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

25

28,5mm (1-1/8") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 


_,D 6,35mm - 19,05mm 19,05(0.75") 

PUSH 6,41 cm ² (1.0 in ² ) 

_ 6,35mm - 12,7mm 25,4(1.00") 

_,D 6,35mm 31,75(1.25") PULL 5,28 cm ² (0.82 in ² ) 

TYPE D 

3,2(.125") 

+ STK. 

"A" 

+ STROKE 

3,2 

(.125") 

38,1(1.500") 

SQ. 

Y 

4,75 

(.187") 

9,5(.375") 

X 

Z 

28,6(1.125") 

6,4(.250") 

7,1(.280") 

(2 PLACES) 

1/8-27 PORT 

(2 PLACES) 

W 

12,0(Ø.472") ROD 

5/16-18 TAP 

#10-24 TAP X .31 DP 

(2 PLACES) 

Non Magnetic 



LS _,D 25,4mm - 101,6mm 19,05(0.75") 

LE _ 

PUSH 6,41 cm 

19,05mm - 101,6mm 25,4(1.00") 

² (1.0 in ² ) 

LH _,D 12,7mm - 101,6mm 31,75(1.25") 

PULL 5,28 cm 

LS S,R 6,35mm - 25,4mm 31,75(1.25") 

² (0.82 in ² ) 

TYPE D 

3,2(.125") 

+ STK. 

"A" 

+ STROKE 

3,2 

(.125) 

38,1(1.500") 

SQ. 

Y 

4,75 

(.187") 

9,5(.375") 

9,5(.375") 

X 

Z 

28,6(1.125") 

6,4(.250") 

7,1(.280") 

(2 PLACES) 

W 

1/8-27 PORT 

(2 PLACES) 12,0(Ø.472") ROD 

5/16-18 TAP 

#10-24 TAP X .31 DP 

(4 PLACES) 

28,5 

x 


LS 

LE 


LH 


(SEE PAGE 62) 


RE - ROD EYE 


(SEE PAGE 61) 



(SEE PAGE 61) 



(SEE PAGE 61) 







(SEE PAGE 59) 


(SEE PAGE 62) 


(SEE PAGE 62) 

26

32mm (1-1/4") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

5,25(.207") 

TYPE 

_,D 

_ 

_,D 

S,R 

5,25(.207") 


10mm - 100mm 

5mm - 100mm 

5mm - 100mm 

5mm - 25mm 

42,0(1.654") 

SQ. 

31,5 

(1.240") 

W 

"A" 

22,5(0.89") 

27,5(1.08") 

32,5(1.28") 

37,5(1.48") 

4,4 

(.173") 

PISTON AREA 

PUSH 8,04 cm ² (1.25 in ² ) 

PULL 6,91 cm ² (1.07 in ² ) 

5,0 

(.197") 

8,4(.331") 

(2 PLACES) 

"A" 

+ STROKE 

"B" 

"C" 

"D" 


G1/8 PORT 1/8-27 

M6X1,0 1/4-20 

M6X1,0 1/4-20 

TYPE D 

5,0(.197") 

+ STK. 


X 

W 

Z 

31,5(1.240") 

Z 

X 

7,1(.280") 


W 

Y 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

12,0(Ø.472") ROD 

"C" TAP 

Y 


_,D 10mm - 25mm 22,5(0.89") 

_ 5mm - 20mm 27,5(1.08") 

PUSH 8,04 cm ² (1.25 in ² ) 

_,D 5mm - 15mm 32,5(1.28") 

S,R 5mm - 10mm 37,5(1.48") 

PULL 6,91 cm ² (1.07 in ² ) 

5,25(.207") 

5,25(.207") 

42,0(1.654") 

SQ. 

31,5 

(1.240") 

W 

"D" TAP X 15,2(.60") DP 

(2 PLACES) 

4,4 

(.173") 

"B" PORT 

(2 PLACES) 

"B" 

"C" 

5,0 

(.197") 

8,4(.331") 

(2 PLACES) 

Z 


G1/8 PORT 1/8-27 

M6X1,0 1/4-20 

"A" 

+ STROKE 

Y 

X 

TYPE D 

5,0(.197") 

+ STK. 

31,5(1.240") 

Z 

X 

7,1(.280") 

12,0(Ø.472") ROD 

"C" TAP 

32 

x 

Y 


(2 PLACES) 

8,7(Ø.343") C'BORE X 5,5(.217") DP 


"B" PORT 

(2 PLACES) 


LS 

LE 


LH 



(SEE PAGE 62) 



RE - ROD EYE 


(SEE PAGE 61) 



(SEE PAGE 61) 















(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

27

32mm (1-1/4") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 

LS 

5,25(.207") 

TYPE 

_,D 

_ 

_,D 

S,R 

5,25(.207") 


10mm - 100mm 

5mm - 100mm 

5mm - 100mm 

5mm - 25mm 

42,0(1.654") 

SQ. 

31,5 

(1.240") 

W 

"A" 

27,5(1.08") 

32,5(1.28") 

37,5(1.48") 

42,5(1.68") 

4,4 

(.173") 

PISTON AREA 

PUSH 8,04 cm ² (1.25 in ² ) 

PULL 6,91 cm ² (1.07 in ² ) 

5,0 

(.197") 

8,4(.331") 

(2 PLACES) 

"A" 

+ STROKE 

"B" 

"C" 

"D" 


G1/8 PORT 1/8-27 

M6X1,0 1/4-20 

M6X1,0 1/4-20 

TYPE D 

5,0(.197") 

+ STK. 


X 

W 

Z 

31,5(1.240") 

Z 

12,0(Ø.472") ROD 

"C" TAP 

Magnetic 


MODEL 

LS 

LE 

LH 

LS 

5,25(.207") 

TYPE 

_,D 

_ 

_,D 

S,R 

5,25(.207") 


10mm - 20mm 

5mm - 15mm 

5mm - 10mm 

5mm 

Y 

42,0(1.654") 

SQ. 

31,5 

(1.240") 

W 

X 

4,4 

(.173") 

7,1(.280") 

"D" TAP X 15,2(.60") DP 

(2 PLACES) 

"A" 

27,5(1.08") 

32,5(1.28") 

37,5(1.48") 

42,5(1.68") 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

PISTON AREA 

PUSH 8,04 cm ² (1.25 in ² ) 

PULL 6,91 cm ² (1.07 in ² ) 

"B" PORT 

(2 PLACES) 

"B" 

"C" 

5,0 

(.197") 

8,4(.331") 

(2 PLACES) 


Z 

"A" 

+ STROKE 

W 


G1/8 PORT 1/8-27 

M6X1,0 1/4-20 

Y 

X 

Y 

TYPE D 

5,0(.197") 

+ STK. 

31,5(1.240") 

Z 

X 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

7,1(.280") 

28 

12,0(Ø.472") ROD 

"C" TAP 

x 

Y 


(2 PLACES) 

8,7(Ø.343") C'BORE X 5,5(.217") DP 


"B" PORT 

(2 PLACES) 

32 

M 





LS 

LE 


LH 





(SEE PAGE 62) 
















RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

32mm (1-1/4") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 


_,D 10mm - 15mm 27,5(1.08") 

PUSH 8,04 cm ² (1.25 in ² ) 

_ 5mm - 10mm 32,5(1.28") 

_,D 5mm 37,5(1.48") PULL 6,91 cm ² (1.07 in ² ) 


"B" G1/8 PORT 1/8-27 

"C" M6X1,0 1/4-20 

"D" M5X0,8 #10-32 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

4,4 

(.173") 

42,0(1.654") 

SQ. 

Y 

5,25(.207") 

12,0(.472") 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

X 

Z 

31,5 

(1.240") 

7,1(.280") 

8,4(.331") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

Magnetic 



LS 

LH 

_,D 

_,D 

20mm - 100mm 

10mm - 100mm 

27,5(1.08") 

37,5(1.48") 

LE 

LS 

_ 

S,R 

15mm - 100mm 

5mm - 25mm 

32,5(1.28") 

42,5(1.68") 

PUSH 8,04 cm ² (1.25 in ² ) 

PULL 6,91 cm ² (1.07 in ² ) 

TYPE D 

5,0 

"A" 

5,0 

(.197") 

+ STROKE 

(.197") 

+ STK. 

4,4 

(.173") 

42,0(1.654") 

SQ. 

12,0(Ø.472") ROD 

"C" TAP 

Y 

W 


"B" G1/8 PORT 1/8-27 

"C" M6X1,0 1/4-20 

"D" M5X0,8 #10-32 

5,25(.207") 

12,0(.472") 

"D" TAP X 8,5(.33") DP 

(2 PLACES) 

12,0(.472") 

X 

Z 

31,5(1.240") 

7,1(.280") 

8,4(.331") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

12,0(Ø.472") ROD 

"C" TAP 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

"D" TAP X 8,5(.33") DP 

(4 PLACES) 

x 

32 

M 




LS 

LE 

LH 






(SEE PAGE 62) 









(SEE PAGE 59) 

RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

29

32mm (1-1/4") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LS 

TYPE 

_,D 

_ 

_,D 

S,R 


10mm - 20mm 

5mm - 15mm 

5mm - 10mm 

5mm 

"A" 

22,5(0.89") 

27,5(1.08") 

32,5(1.28") 

37,5(1.48") 

PISTON AREA 

PUSH 8,04 cm ² (1.25 in ² ) 

PULL 6,91 cm ² (1.07 in ² ) 


"B" G1/8 PORT 1/8-27 

"C" M6X1,0 1/4-20 

"D" M5X0,8 #10-32 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

4,4 

(.173") 

42,0(1.654") 

SQ. 

Y 

5,25 

(.207") 

12,0(.472") 

X 

Z 

31,5 

(1.240") 

7,1(.280") 

8,4(.331") 

(2 PLACES) 

Non Magnetic 



LS 

LH 

_,D 

_,D 

25mm - 100mm 

15mm - 100mm 

22,5(0.89") 

32,5(1.28") 

LE 

LS 

_ 

S,R 

20mm - 100mm 

10mm - 25mm 

27,5(1.08") 

37,5(1.48") 

PUSH 8,04 cm ² (1.25 in ² ) 

PULL 6,91 cm ² (1.07 in ² ) 

TYPE D 

5,0 

(.197") 

+ STK. 

"A" 

+ STROKE 

"B" PORT 

(2 PLACES) 

5,0 

(.197") 

4,4 

(.173") 

42,0(1.654") 

SQ. 

Y 

W 

12,0(Ø.472") ROD 

"C" TAP 

5,25(.207") 

12,0(.472") 

"D" TAP X 8,5(.33") DP 

(2 PLACES) 


"B" G1/8 PORT 1/8-27 

"C" M6X1,0 1/4-20 

"D" M5X0,8 #10-32 

12,0(.472") 

X 

Z 

31,5(1.240") 

7,1(.280") 

8,4(.331") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

12,0(Ø.472") ROD 

"C" TAP 

"D" TAP X 8,5(.33") DP 

(4 PLACES) 

32 

x 


LS 

LE 


LH 



(SEE PAGE 62) 



RE - ROD EYE 

(SEE PAGE 61) 









(SEE PAGE 59) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

30

40mm (1-1/2") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LH 

6,0(.236") 


_,D 

_ 

10mm - 100mm 

5mm - 100mm 

25,0(0.98") 

40,0(1.58") 

_ 

D 

5mm - 100mm 

5mm - 100mm 

35,0(1.38") 

45,0(1.78") 

PUSH 12,56 cm ² (1.95 in ² ) 

PULL 10,55 cm ² (1.64 in ² ) 

6,0(.236") 

50,0(1.969") 

SQ. 3,6 

(.142") 

38,0 

(1.496") 

W 

5,0 

(.197") 

9,9(.390") 

(2 PLACES) 

"A" 

+ STROKE 

"B" 

"C" 

"D" 


G1/8 PORT 1/8-27 

M8X1,25 5/16-18 

M6X1,0 1/4-20 

TYPE D 

5,0(.197") 

+ STK. 


X 

W 

Z 

38,0(1.496") 

Z 

X 

8,7(.343") 


W 

Y 

16,0(Ø.630") ROD 

"C" TAP 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LH 

Y 

"D" TAP X 15,2(.60") DP 

(2 PLACES) 


_,D 10mm - 25mm 25,0(0.98") 

_ 5mm - 15mm 35,0(1.38") PUSH 12,56 cm ² (1.95 in ² ) 

_ 5mm - 10mm 40,0(1.58") 

D 5mm 45,0(1.78") 

PULL 10,55 cm ² (1.64 in ² ) 

50,0(1.969") 

SQ. 3,6 

(.142") 

38,0 

(1.496") 

6,0(.236") 

"B" PORTS 

(2 PLACES) 

"B" 

"C" 

5,0 

(.197") 

9,9(.390") 

(2 PLACES) 

Z 


G1/8 PORT 1/8-27 

M8X1,25 5/16-18 

"A" 

+ STROKE 

Y 

X 

TYPE D 

5,0(.197") 

+ STK. 

6,0(.236") 

W 

8,7(.343") 

38,0(1.496") 

Z 

X 

16,0(Ø.630") ROD 

"C" TAP 

40 

x 

Y 


(2 PLACES) 

8,7(Ø.343") C'BORE X 5,5(.217") DP 


"B" PORTS 

(2 PLACES) 


LS 

LE 

LH 






(SEE PAGE 62) 
















RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

31

40mm (1-1/2") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 

LH 

6,0(.236") 


_,D 

_ 

10mm - 100mm 

5mm - 100mm 

30,0(1.18") 

45,0(1.78") 

_ 

D 

5mm - 100mm 

5mm - 100mm 

40,0(1.58") 

50,0(1.98") 

PUSH 12,56 cm ² (1.95 in ² ) 

PULL 10,55 cm ² (1.64 in ² ) 

6,0(.236") 

50,0(1.969") 

SQ. 3,6 

(.142") 

38,0 

(1.496") 

W 

5,0 

(.197") 

9,9(.390") 

(2 PLACES) 

"A" 

+ STROKE 

"B" 

"C" 

"D" 


G1/8 PORT 1/8-27 

M8X1,25 5/16-18 

M6X1,0 1/4-20 

TYPE D 

5,0(.197") 

+ STK. 


X 

W 

Z 

38,0(1.496") 

Z 

16,0(Ø.630") ROD 

"C" TAP 

Magnetic 


MODEL 

LS 

LE 

LH 

6,0(.236") 

Y 

X 

8,7(.343") 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

"D" TAP X 15,2(.60") DP 

(2 PLACES) 


_,D 10mm - 20mm 30,0(1.18") 

PUSH 12,56 cm ² (1.95 in ² ) 

_ 5mm - 10mm 40,0(1.58") 

_ 

5mm 45,0(1.78") PULL 10,55 cm ² (1.64 in ² ) 

50,0(1.969") 

SQ. 3,6 

(.142") 

38,0 

(1.496") 

"B" PORTS 

(2 PLACES) 

"B" 

"C" 

5,0 

(.197") 

9,9(.390") 

(2 PLACES) 


Z 


G1/8 PORT 1/8-27 

M8X1,25 5/16-18 

"A" 

+ STROKE 

W 

Y 

X 

TYPE D 

5,0(.197") 

+ STK. 

Y 

6,0(.236") 

W 

38,0(1.496") 

Z 

X 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

8,7(.343") 

32 

16,0(Ø.630") ROD 

"C" TAP 

x 

Y 


(2 PLACES) 

8,7(Ø.343") C'BORE X 5,5(.217") DP 


"B" PORTS 

(2 PLACES) 


40 

M 




LS 

LE 

LH 






(SEE PAGE 62) 
















RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

40mm (1-1/2") Bore 

Magnetic 


MODEL 

LS 

LE 


_,D 10mm - 15mm 30,0(1.18") PUSH 12,56 cm ² (1.95 in ² ) 

_ 

5mm 40,0(1.58") PULL 10,55 cm ² (1.64 in ² ) 


"B" G1/8 PORT 1/8-27 

"C" M8X1,25 5/16-18 

"D" M6X1,0 1/4-20 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

3,6 

(.142") 

50,0(1.969") 

SQ. 

Y 

6,0 

(.236") 

12,0(.472") 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

X 

Z 

38,0(1.496") 

8,7(.343") 

9,9(.390) 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

Magnetic 


MODEL 

LS 

LE 

LH 

LH 

W 

16,0(Ø.630") ROD 

"C" TAP 


_,D 

_ 

20mm - 100mm 

5mm - 100mm 

30,0(1.18") 

45,0(1.78") 

_ 

D 

5mm - 100mm 

5mm - 100mm 

40,0(1.58") 

50,0(1.98") 

PUSH 12,56 cm ² (1.95 in ² ) 

PULL 10,55 cm ² (1.64 in ² ) 

"D" TAP X 9,5(.37") DP 

(2 PLACES) 


"B" G1/8 PORT 1/8-27 

"C" M8X1,25 5/16-18 

"D" M6X1,0 1/4-20 

TYPE D 

5,0 

(.197") 

+ STK. 

"A" 

+ STROKE 

3,6 

(.142") 

5,0 

(.197") 

50,0(1.969") 

SQ. 

Y 

6,0(.236") 

12,0(.472") 

12,0(.472") 

X 

Z 

38,0(1.496") 

8,7(.343") 

9,9(.390) 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

16,0(Ø.630") ROD 

"C" TAP 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

"D" TAP X 9,5(.37") DP 

(4 PLACES) 

40 

x 

M 





LS 

LE 


LH 



(SEE PAGE 62) 











(SEE PAGE 59) 

RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

33

40mm (1-1/2") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 



_ 5mm - 10mm 35,0(1.38") 

_ 

5mm 40,0(1.58") PULL 10,55 cm ² (1.64 in ² ) 


"B" G1/8 PORT 1/8-27 

"C" M8X1,25 5/16-18 

"D" M6X1,0 1/4-20 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

3,6 

(.142") 

50,0(1.969") 

SQ. 

Y 

6,0(.236") 

12,0(.472") 

X 

Z 

38,0(1.496") 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LH 

8,7(.343") 

9,9(.390) 

"B" PORT 

(2 PLACES) 

W 

16,0(Ø.630") ROD 

"C" TAP 


_,D 

_ 

25mm - 100mm 

10mm - 100mm 

25,0(0.98") 

40,0(1.58") 

_ 

D 

15mm - 100mm 

5mm - 100mm 

35,0(1.38") 

45,0(1.78") 

PUSH 12,56 cm ² (1.95 in ² ) 

PULL 10,55 cm ² (1.64 in ² ) 

"D" TAP X 9,5(.37") DP 

(2 PLACES) 


"B" G1/8 PORT 1/8-27 

"C" M8X1,25 5/16-18 

"D" M6X1,0 1/4-20 

TYPE D 

5,0 

(.197") 

+ STK. 

"A" 

+ STROKE 

3,6 

(.142") 

5,0 

(.197") 

50,0(1.969") 

SQ. 

Y 

6,0(.236") 

12,0(.472") 

12,0(.472") 

X 

Z 

38,0(1.496") 

8,7(.343") 

9,9(.390) 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

16,0(Ø.630") ROD 

"C" TAP 

"D" TAP X 9,5(.37") DP 

(4 PLACES) 

34 

40 

x 


LS 

LE 


LH 





(SEE PAGE 62) 









(SEE PAGE 59) 

RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

50mm (2.0") Bore 

Non Magnetic 



LS 

LH 

_,D 

_ 

10mm - 100mm 

5mm - 100mm 

28,5(1.12") 

43,5(1.72") 

LE 

LH 

_ 

D 

5mm - 100mm 

5mm - 100mm 

38,5(1.52") 

48,5(1.91") 

PUSH 19,63 cm ² (3.04 in ² ) 

PULL 17,62 cm ² (2.73 in ² ) 

6,5(.256") 

6,5(.256") 

63,0(2.48") SQ. 

50,0 

(1.968") 

W 

5,0 

(.197") 

10,9(.430") 

(2 PLACES) 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M10X1,5 3/8-24 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 


X 

W 

Z 

50,0(1.968") 

Z 

X 

8,7(.343") 


W 

Y 

Z 

X 

16,0(Ø.630") ROD 

"C" TAP 

Non Magnetic 


Y 

"D" TAP X 20,3(.80") DP 

(2 PLACES) 


LS 

LH 

_,D 

_ 

10mm - 40mm 

5mm - 25mm 

28,5(1.12") 

43,5(1.72") 

LE 

LH 

_ 

D 

5mm - 30mm 

5mm - 20mm 

38,5(1.52") 

48,5(1.91") 

PUSH 19,63 cm ² (3.04 in ² ) 

PULL 17,62 cm ² (2.73 in ² ) 

63,0(2.48") SQ. 

6,5(.256") 

6,5(.256") 

50,0 

(1.968") 

W 

5,0 

(.197") 

10,9(.430") 

(2 PLACES) 

"B" PORTS 

(2 PLACES) 

"B" 

"C" 


G1/8 PORT 1/8-27 

M10X1,5 3/8-24 

"A" 

+ STROKE 

Y 

TYPE D 

5,0(.197") 

+ STK. 

8,7(.343") 

50,0(1.968") 

Z 

X 

16,0(Ø.630") ROD 

"C" TAP 

50 

x 

Y 


(2 PLACES) 

10,3(Ø.406") C'BORE X 6,9(.27") DP 


"B" PORTS 

(2 PLACES) 


LS 

LE 


LH 





(SEE PAGE 62) 





RE - ROD EYE 


(SEE PAGE 61) 












(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

35

50mm (2.0") Bore 

Magnetic 



LS 

LH 

_,D 

_ 

10mm - 100mm 

5mm - 100mm 

33,5(1.32") 

48,5(1.91") 

LE 

LH 

_ 

D 

5mm - 100mm 

5mm - 100mm 

43,5(1.72") 

53,5(2.11") 

PUSH 19,63 cm ² (3.04 in ² ) 

PULL 17,62 cm ² (2.73 in ² ) 

6,5(.256") 

6,5(.256") 

63,0(2.48") SQ. 

50,0 

(1.968") 

W 

5,0 

(.197") 

10,9(.430") 

(2 PLACES) 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M10X1,5 3/8-24 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 


X 

W 

Z 

Magnetic 


MODEL 

LS 

LE 

LH 

LH 

50,0(1.968") 

Z 

16,0(Ø.630") ROD 

"C" TAP 

Y 

8,7(.343") 


_,D 10mm - 35mm 33,5(1.32") 

_ 5mm - 25mm 43,5(1.72") PUSH 19,63 cm ² (3.04 in ² ) 

_ 5mm - 20mm 48,5(1.91") 

D 5mm - 15mm 53,5(2.11") 

PULL 17,62 cm ² (2.73 in ² ) 

6,5(.256") 

6,5(.256") 

50,0(1.968") 

Z 

63,0(2.48") SQ. 

50,0 

(1.968") 

W 

X 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

"D" TAP X 20,3(.80") DP 

(2 PLACES) 

X 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

5,0 

(.197") 

10,9(.430") 

(2 PLACES) 

8,7(.343") 

"B" PORTS 

(2 PLACES) 

"B" 

"C" 


Z 


G1/8 PORT 1/8-27 

M10X1,5 3/8-24 

"A" 

+ STROKE 

W 

Y 

X 

Y 

TYPE D 

5,0(.197") 

+ STK. 

16,0(Ø.630") ROD 

"C" TAP 

Y 


(2 PLACES) 

10,3(Ø.406") C'BORE X 6,9(.27") DP 


"B" PORTS 

(2 PLACES) 

36 

x 

50 

M 





LS 

LE 


LH 





(SEE PAGE 62) 
















RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

50mm (2.0") Bore 

Magnetic 


MODEL 

LS 

LE 



_ 

5mm 43,5(1.72") PULL 17,62 cm ² (2.73 in ² ) 


"B" G1/8 PORT 1/8-27 

"C" M10X1,5 3/8-24 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

63,0(2.48") SQ. 

Y 

6,5(.256") 

12,0(.472") 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

X 

Z 

50,0 

(1.968") 

8,7(.343") 

10,9(.430") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

Magnetic 


MODEL 

LS 

LE 

LH 

LH 

W 

16,0(Ø.630") ROD 

"C" TAP 


_,D 

_ 

20mm - 100mm 

5mm - 100mm 

33,5(1.32") 

48,5(1.91") 

_ 

D 

10mm - 100mm 

5mm - 100mm 

43,5(1.72") 

53,5(2.11") 

PUSH 19,63 cm ² (3.04 in ² ) 

PULL 17,62 cm ² (2.73 in ² ) 

"D" TAP X 12,0(.47") DP 

(4 PLACES) 


"B" G1/8 PORT 1/8-27 

"C" M10X1,5 3/8-24 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

63,0(2.48") SQ. 

Y 

6,5(.256") 

12,0(.472") 

12,0(.472") 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

X 

Z 

50,0 

(1.968") 

8,7(.343") 

10,9(.430") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

16,0(Ø.630") ROD 

"C" TAP 

"D" TAP X 12,0(.47") DP 

(4 PLACES) 

x 

50 

M 





LS 

LE 


LH 




(SEE PAGE 62) 






RE - ROD EYE 

(SEE PAGE 61) 





(SEE PAGE 59) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

37

50mm (2.0") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 


_,D 10mm - 20mm 28,5(1.12") 

PUSH 19,63 cm ² (3.04 in ² ) 

_ 5mm - 10mm 38,5(1.52") 

_ 

5mm 43,5(1.72") PULL 17,62 cm ² (2.73 in ² ) 


"B" G1/8 PORT 1/8-27 

"C" M10X1,5 3/8-24 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

63,0(2.48") SQ. 

Y 

6,5(.256") 

12,0(.472") 

X 

Z 

50,0 

(1.968") 

8,7(.343") 

10,9(.430") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

16,0(Ø.630") ROD 

"C" TAP 

"D" TAP X 12,0(.47") DP 

(2 PLACES) 

Non Magnetic 


MODEL 

LS 

LE 

LH 

LH 


_,D 25mm - 100mm 28,5(1.12") 

_ 15mm - 100mm 38,5(1.52") PUSH 19,63 cm ² (3.04 in ² ) 

_ 10mm - 100mm 43,5(1.72") PULL 17,62 cm ² (2.73 in ² ) 

D 5mm - 100mm 48,5(1.91") 


"B" G1/8 PORT 1/8-27 

"C" M10X1,5 3/8-24 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

63,0(2.48") SQ. 

Y 

6,5(.256") 

12,0(.472") 

12,0(.472") 

X 

Z 

50,0 

(1.968") 

8,7(.343") 

10,9(.430") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

W 

16,0(Ø.630") ROD 

"C" TAP 

"D" TAP X 12,0(.47") DP 

(4 PLACES) 

38 

50 

x 


LS 

LE 


LH 




(SEE PAGE 62) 










(SEE PAGE 59) 

RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

63mm (2-1/2") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

8,0(.315") 


_,D 10mm - 100mm 32,0(1.26") 

PUSH 31,17 cm 

_ 5mm - 100mm 42,0(1.66") 

² (4.83 in ² ) 

_,D 5mm - 100mm 52,0(2.05") PULL 28,03 cm ² (4.34 in ² ) 

8,0(.315") 

60,0 

(2.362") 

Z 

76,0(2.992") 

SQ. 

60,0 

(2.362") 

W 

X 

6,0(.236") 

11,7(.46") 

20,6(.81") 

5,0 

(.197") 

12,7(.50") 

(2 PLACES) 

22,0 

(.866") 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M10X1,5 3/8-24 

TYPE D 

5,0(.197") 

+ STK. 



W 

X 

W 

Y 

Z 

Non Magnetic 


MODEL 

LS 

LE 

LH 

20,0(Ø.787") ROD 

"C" TAP 

Y 


_,D 10mm - 40mm 32,0(1.26") 

PUSH 31,17 cm 

_ 5mm - 30mm 42,0(1.66") 

² (4.83 in ² ) 


8,0(.315") 

60,0 

(2.362") 

8,0(.315") 

Z 

76,0(2.992") 

SQ. 

60,0 

(2.362") 

W 

"D" TAP X 23,9(.94") DP 

(4 PLACES) 

X 

6,0(.236") 

11,7(.46") 

20,6(.81") 

"B" PORTS 

(2 PLACES) 

"B" 

"C" 

5,0 

(.197") 

12,7(.50") 

(2 PLACES) 

22,0 

(.866") 

Z 


G1/8 PORT 1/8-27 

M12X1,75 1/2-13 

"A" 

+ STROKE 

Y 

X 

TYPE D 

5,0(.197") 

+ STK. 

20,0(Ø.787") ROD 

"C" TAP 

63 

x 

Y 


(4 PLACES) 

13,5(Ø.53") C'BORE X 8,4(.33") DP 


"B" PORTS 

(2 PLACES) 


LS 

LE 


LH 



(SEE PAGE 62) 







RE - ROD EYE 

(SEE PAGE 61) 













(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

39

63mm (2-1/2") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 

8,0(.315") 


_,D 10mm - 100mm 37,0(1.46") 

PUSH 31,17 cm ² (4.83 in ² ) 

_ 5mm - 100mm 47,0(1.85") 


8,0(.315") 

60,0 

(2.362") 

Z 

76,0(2.992") 

SQ. 

60,0 

(2.362") 

W 

X 

6,0(.236") 

11,7 

(.46") 

20,6(.81") 

SENSOR TRACK 

(2 PLACES) 

5,0 

(.197") 

12,7(.50") 

(2 PLACES) 

22,0 

(.866") 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M10X1,5 3/8-24 

TYPE D 

5,0(.197") 

+ STK. 



W 

X 

W 

Y 

Z 

Magnetic 


MODEL 

LS 

LE 

LH 

20,0(Ø.787") ROD 

"C" TAP 

Y 

"D" TAP X 23,9(.94") DP 

(4 PLACES) 


_,D 10mm - 35mm 37,0(1.46") 

PUSH 31,17 cm ² (4.83 in ² ) 

_ 5mm - 25mm 47,0(1.85") 


8,0(.315") 

8,0(.315") 

60,0 

(2.362") 

Z 

76,0(2.992") 

SQ. 

60,0 

(2.362") 

W 

X 

6,0(.236") 

11,7(.46") 

20,6(.81") 

SENSOR TRACK 

(2 PLACES) 

"B" PORTS 

(2 PLACES) 

"B" 

"C" 

5,0 

(.197") 

12,7(.50") 

(2 PLACES) 

22,0 

(.866") 

Z 


G1/8 PORT 1/8-27 

M12X1,75 1/2-13 

"A" 

+ STROKE 

Y 

X 

TYPE D 

5,0(.197") 

+ STK. 

40 

20,0(Ø.787") ROD 

"C" TAP 

x 

Y 


(4 PLACES) 

13,5(Ø.53") C'BORE X 8,4(.33") DP 


"B" PORTS 

(2 PLACES) 

63 

M 





LS 

LE 


LH 





(SEE PAGE 62) 
















RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

63mm (2-1/2") Bore 

Magnetic 


MODEL 

LS 

LE 



_ 

5mm 47,0(1.85") PULL 28,03 cm ² (4.34 in ² ) 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

6,0(.236") 

76,0(2.992") 

SQ. 

Y 

12,0(.472") 

8,0 

(.315") 

SENSOR TRACK 

(2 PLACES) 

X 

Z 

60,0 

(2.362") 

22,0(.866") 

20,6(.81") 

12,7(.50") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

11,7(.46") 

W 

20,0(Ø.787") ROD 

"C" TAP 

"D" TAP 15,0(.59") DP 

(2 PLACES) 

Magnetic 


MODEL 

LS 

LE 

LH 


_,D 20mm - 100mm 37,0(1.46") 

PUSH 31,17 cm ² (4.83 in ² ) 

_ 10mm - 100mm 47,0(1.85") 



"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

6,0 

(.236") 

76,0(2.992") 

SQ. 

Y 

12,0(.472") 

8,0 

(.315") 

12,0(.472") 

SENSOR TRACK 

(2 PLACES) 

X 

Z 

60,0 

(2.362") 

22,0(.866") 

20,6(.81") 

12,7(.50") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

11,7(.46") 

W 

20,0(Ø.787") ROD 

"C" TAP 

"D" TAP X 15,0(.59") DP 

(4 PLACES) 

63 x 

M 





LS 

LE 

LH 





(SEE PAGE 62) 










(SEE PAGE 59) 

RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

41

63mm (2-1/2") Bore 

Non Magnetic 


MODEL 

LS 

LE 



_ 5mm - 10mm 42,0(1.66") PULL 28,03 cm ² (4.34 in ² ) 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

6,0(.236") 

76,0(2.992") 

SQ. 

Y 

12,0(.472") 

8,0 

(.315") 

X 

Z 

60,0 

(2.362") 

22,0(.866") 

20,6(.81") 

12,7(.50") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

11,7(.46") 

W 

20,0(Ø.787") ROD 

"C" TAP 

"D" TAP X 15,0(.59") DP 

(2 PLACES) 

Non Magnetic 


MODEL 

LS 

LE 

LH 


_,D 25mm - 100mm 32,0(1.26") 

PUSH 31,17 cm ² (4.83 in ² ) 

_ 15mm - 100mm 42,0(1.66") 



"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

6,0 

(.236") 

76,0(2.992") 

SQ. 

Y 

12,0(.472") 

8,0 

(.315") 

12,0(.472") 

X 

Z 

60,0 

(2.362") 

22,0(.866") 

20,6(.81") 

12,7(.50") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

11,7(.46") 

W 

20,0(Ø.787") ROD 

"C" TAP 

"D" TAP X 15,0(.59") DP 

(4 PLACES) 

42 

63 

x 


LS 

LE 


LH 




(SEE PAGE 62) 










(SEE PAGE 59) 

RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

76mm (3.0") Bore 

Non Magnetic 


MODEL 

LS 

LE 

LH 

8,0(.315") 


_,D 10mm - 100mm 38,0(1.50") 

PUSH 45,6 cm 

_ 5mm - 100mm 48,0(1.89") 

² (7.07 in ² ) 


8,0(.315") 

89,0(3.504") 

SQ. 

73,0 

(2.874") 

W 

5,0 

(.197") 

14,2(.56") 

(2 PLACES) 

20,6(.81") 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M10X1,5 3/8-24 

TYPE D 

5,0(.197") 

+ STK. 


X 

W 

Z 

73,0 

(2.874") 

Z 

X 


W 

Y 

Non Magnetic 


MODEL 

LS 

LE 

LH 

8,0(.315") 

20,0(Ø.787") ROD 

"C" TAP 

"D" TAP X 23,9(.94) DP 

(4 PLACES) 


_,D 10mm - 40mm 38,0(1.50") 

PUSH 45,6 cm 

_ 5mm - 30mm 48,0(1.89") 

² (7.07 in ² ) 


8,0(.315") 

Y 

89,0(3.504") 

SQ. 

73,0 

(2.874") 

W 

"B" PORTS 

(2 PLACES) 

"B" 

"C" 

5,0 

(.197") 

14,2(.56") 

(2 PLACES) 

Z 


G1/8 PORT 1/8-27 

M12X1,75 1/2-13 

"A" 

+ STROKE 

Y 

X 

TYPE D 

5,0(.197") 

+ STK. 

20,6(.81") 

73,0 

(2.874") 

Z 

X 

20,0(Ø.787") ROD 

"C" TAP 

76 

x 

Y 


(4 PLACES) 

13,5(Ø.53") C'BORE X 8,4(.33") DP 


"B" PORTS 

(2 PLACES) 


LS 

LE 


LH 



(SEE PAGE 62) 







RE - ROD EYE 


(SEE PAGE 61) 












(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

43

76mm (3.0") Bore 

Magnetic 


MODEL 

LS 

LE 

LH 

8,0(.315") 


_,D 10mm - 100mm 43,0(1.69") 

PUSH 45,6 cm 

_ 5mm - 100mm 53,0(2.09") 

² (7.07 in ² ) 


8,0(.315") 

89,0(3.504") 

SQ. 

73,0 

(2.874") 

W 

5,0 

(.197") 

14,2(.56") 

(2 PLACES) 

20,6(.81") 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M10X1,5 3/8-24 

TYPE D 

5,0(.197") 

+ STK. 


X 

W 

Z 

73,0 

(2.874") 

Z 

X 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 


W 

Y 

Magnetic 


MODEL 

LS 

LE 

LH 

8,0(.315") 

20,0(Ø.787) ROD 

"C" TAP 


_,D 10mm - 35mm 43,0(1.69") 

PUSH 45,6 cm 

_ 5mm - 25mm 53,0(2.09") 

² (7.07 in ² ) 


8,0(.315") 

73,0 

(2.874") 

Z 

Y 

89,0(3.504") 

SQ. 

73,0 

(2.874") 

W 

"D" TAP X 23,9(.94) DP 

(4 PLACES) 

X 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

"B" 

"C" 

5,0 

(.197") 

14,2(.56") 

(2 PLACES) 

20,6(.81") 

"B" PORTS 

(2 PLACES) 

Z 


G1/8 PORT 1/8-27 

M12X1,75 1/2-13 

"A" 

+ STROKE 

Y 

X 

TYPE D 

5,0(.197") 

+ STK. 

20,0(Ø.787") ROD 

"C" TAP 

Y 


(4 PLACES) 

13,5(Ø.53") C'BORE X 8,4(.33") DP 


"B" PORTS 

(2 PLACES) 

44 

x 

76 

M 





LS 

LE 


LH 




(SEE PAGE 62) 






RE - ROD EYE 

(SEE PAGE 61) 



(SEE PAGE 61) 












(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

76mm (3.0") Bore 

Magnetic 


MODEL 

LS 

LE 



_ 

5mm 53,0(2.09") PULL 42,46 cm ² (6.59 in ² ) 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M10X1,5 3/8-24 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

X 

89,0(3.504") 

SQ. 

Y 

Z 

16,0(.630") 

8,0 

(.315") 

73,0 

(2.874") 

20,6(.81") 

W 

14,2(.56") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

20,0(Ø.787") ROD 

"C" TAP 

"D" TAP X 19,0(.75") DP 

(2 PLACES) 

Magnetic 


MODEL 

LS 

LE 

LH 


_,D 20mm - 100mm 43,0(1.69") 

PUSH 45,6 cm 

_ 10mm - 100mm 53,0(2.09") 

² (7.07 in ² ) 



"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M10X1,5 3/8-24 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

89,0(3.504") 

SQ. 

Y 

8,0(.315") 

16,0(.630") 

16,0(.630") 

SENSOR 

MOUNTING 

TRACK 

(2 PLACES) 

X 

Z 

73,0 

(2.874") 

20,6(.81") 

W 

14,2(.56") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

20,0(Ø.787") ROD 

"C" TAP 

"D" TAP X 19,0(.75") DP 

(4 PLACES) 

76 x 

M 





LS 

LE 

LH 





(SEE PAGE 62) 





RE - ROD EYE 


(SEE PAGE 61) 





(SEE PAGE 59) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62) 

45

76mm (3.0") Bore 

Non Magnetic 


MODEL 

LS 

LE 



_ 5mm - 10mm 48,0(1.89") PULL 42,46 cm ² (6.59 in ² ) 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M10X1,5 3/8-24 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

89,0(3.504") 

SQ. 

Y 

8,0 

(.315") 

16,0(.630") 

X 

Z 

73,0 

(2.874") 

20,6(.81") 

W 

14,2(.56") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

20,0(Ø.787") ROD 

"C" TAP 

"D" TAP 19,0(.75") DP 

(2 PLACES) 

Non Magnetic 


MODEL 

LS 

LE 

LH 


_,D 25mm - 100mm 38,0(1.50") 

PUSH 45,6 cm 

_ 15mm - 100mm 48,0(1.89") 

² (7.07 in ² ) 



"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M10X1,5 3/8-24 

TYPE D 

5,0(.197") 

+ STK. 

"A" 

+ STROKE 

5,0 

(.197") 

89,0(3.504") 

SQ. 

Y 

8,0(.315") 

16,0(.630") 

16,0(.630") 

X 

Z 

73,0 

(2.874") 

20,6(.81") 

W 

14,2(.56") 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

20,0(Ø.787") ROD 

"C" TAP 

"D" TAP X 19,0(.75") DP 

(4 PLACES) 

46 

76 

x 


LS 

LE 


LH 





(SEE PAGE 62) 









(SEE PAGE 59) 

RE - ROD EYE 

(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 61) 


(SEE PAGE 62) 


(SEE PAGE 62)

101mm (4.0") Bore 

Non Magnetic 



LS _,D 10mm - 100mm 41,5(1.63") 

PUSH 81,07 cm 

LE _ 5mm - 100mm 51,5(2.03") 

² (12.57 in ² ) 

LH _,D 5mm - 100mm 61,5(2.42") PULL 77,93 cm ² (12.09 in ² ) 

127,0(5.0") 

80,8(3.182") 

40,4 

(1.591") 

W 

5,0 

(.197") 

16,5(.65") 

(2 PLACES) 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 


W 

X 

Z 

40,4 

(1.591") 

80,8 

(3.182") 

Z 

X 


W 

Y 

20,0(Ø.787") ROD 

"C" TAP 

Non Magnetic 


Y 

"D" TAP X 19.8(.78") DP 

(4 PLACES) 


LS _,D 10mm - 50mm 41,5(1.63") 

PUSH 81,07 cm 

LE _ 5mm - 40mm 51,5(2.03") 

² (12.57 in ² ) 


"B" PORT 

(2 PLACES) 

"B" 

"C" 

Z 


G1/8 PORT 1/8-27 

M12X1,75 1/2-13 

Y 

X 

127,0(5.0") 

80,8(3.182") 

W 

40,4 

(1.591") 

5,0 

(.197") 

16,5(.65") 

(2 PLACES) 

"A" 

+ STROKE 

TYPE D 

5,0(.197") 

+ STK. 

80,8 

(3.182") 

40,4 

(1.591") 

Z 

X 

20,0(Ø.787") ROD 

"C" TAP 

Y 


(4 PLACES) 

"B" PORT 

(2 PLACES) 

101 

x 


LS 

LE 


LH 




(SEE PAGE 62) 







RE - ROD EYE 

(SEE PAGE 61) 





(SEE PAGE 61) 





(SEE PAGE 61) 


47

101mm (4.0") Bore 

Magnetic 



LS _,D 10mm - 100mm 51,5(2.03") 

PUSH 81,07 cm 

LE _ 5mm - 100mm 61,5(2.42") 

² (12.57 in ² ) 


SENSOR 

MOUNTING 

TRACK 

127,0(5.0") 

80,8(3.182") 

40,4 

(1.591") 

W 

5,0 

(.197") 

16,5(.65") 

(2 PLACES) 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 


W 

X 

Z 

80,8 

(3.182") 

40,4 

(1.591") 

Z 

X 


W 

Y 

MODEL 

LS 

LE 

LH 

20,0(Ø.787") ROD 

"C" TAP 

Magnetic 


Y 

"D" TAP X 19.8(.78") DP 

(4 PLACES) 


_,D 10mm - 40mm 51,5(2.03") 

PUSH 81,07 cm 

_ 5mm - 30mm 61,5(2.42") 

² (12.57 in ² ) 


"B" PORT 

(2 PLACES) 

"B" 

"C" 

Z 


G1/8 PORT 1/8-27 

M12X1,75 1/2-13 

Y 

X 

SENSOR 

MOUNTING 

TRACK 

127,0(5.0") 

80,8(3.182") 

W 

40,4 

(1.591") 

5,0 

(.197") 

16,5(.65") 

(2 PLACES) 

"A" 

+ STROKE 

TYPE D 

5,0(.197") 

+ STK. 

80,8 

(3.182") 

40,4 

(1.591") 

Z 

X 

20,0(Ø.787") ROD 

"C" TAP 

Y 


(4 PLACES) 

"B" PORT 

(2 PLACES) 

48 

x 

MODEL 

101 

BORE STROKE TYPE MOUNTING 

M 

MAGNETIC OPTIONS 




LS 

LE 

LH 






(SEE PAGE 62) 






RE - ROD EYE 


(SEE PAGE 61) 





(SEE PAGE 61) 





(SEE PAGE 61)

127mm (5.0") Bore 

Non Magnetic 



LS _,D 10mm - 100mm 44,5(1.75") 

PUSH 126,7 cm 

LE _ 5mm - 100mm 54,5(2.15") 

² (19.6 in ² ) 


152,0(5.98") 

98,8(3.889") 

49,4 

(1.945") 

W 

5,0 

(.197") 

17,0(.67") 

(2 PLACES) 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 


W 

X 

Z 

98,8 

(3.889") 

49,4 

(1.945") 

Z 

X 


W 

Y 

20,0(Ø.787") ROD 

"C" TAP 

Non Magnetic 


Y 

"D" TAP X 19,8(.78") DP 

(4 PLACES) 


LS _,D 10mm - 45mm 44,5(1.75") 

PUSH 126,7 cm 

LE _ 5mm - 35mm 54,5(2.15") 

² (19.6 in ² ) 


"B" PORT 

(2 PLACES) 

"B" 

"C" 

Z 


G1/8 PORT 1/8-27 

M12X1,75 1/2-13 

Y 

X 

152,0(5.98") 

98,8(3.889") 

49,4 

(1.945") 

5,0 

(.197") 

17,0(.67") 

(2 PLACES) 

"A" 

+ STROKE 

TYPE D 

5,0(.197") 

+ STK. 

W 

98,8 

(3.889") 

49,4 

(1.945") 

Z 

X 

20,0(Ø.787") ROD 

"C" TAP 

Y 


(4 PLACES) 

"B" PORT 

(2 PLACES) 

127 

x 


LS 

LE 


LH 




(SEE PAGE 62) 







RE - ROD EYE 

(SEE PAGE 61) 









(SEE PAGE 61) 


(SEE PAGE 61) 

49

127mm (5.0") Bore 

Magnetic 



LS _,D 10mm - 100mm 54,5(2.15") 

PUSH 126,7 cm ² (19.6 in ² ) 

LE _ 5mm - 100mm 64,5(2.54") 


SENSOR 

MOUNTING 

TRACK 

152,0(5.98") 

98,8(3.889") 

49,4 

(1.945") 

W 

5,0 

(.197") 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M12X1,75 1/2-13 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 

17,0(.67") 


(2 PLACES) W 

X 

Z 

98,8 

(3.889") 

49,4 

(1.945") 

Z 

X 


W 

Y 

20,0(Ø.787") ROD 

"C" TAP 

Magnetic 


Y 

"D" TAP X 19,8(.78") DP 

(4 PLACES) 


LS _,D 10mm - 35mm 54,5(2.15") 

PUSH 126,7 cm 

LE _ 5mm - 25mm 64,5(2.54") 

² (19.6 in ² ) 


"B" PORT 

(2 PLACES) 

"B" 

"C" 

Z 


G1/8 PORT 1/8-27 

M12X1,75 1/2-13 

Y 

X 

SENSOR 

MOUNTING 

TRACK 

152,0(5.98") 

98,8(3.889") 

W 

49,4 

(1.945") 

5,0 

(.197") 

17,0(.67") 

(2 PLACES) 

"A" 

+ STROKE 

TYPE D 

5,0(.197") 

+ STK. 

98,8 

(3.889") 

49,4 

(1.945") 

Z 

X 

20,0(Ø.787) ROD 

"C" TAP 

Y 


(4 PLACES) 

"B" PORT 

(2 PLACES) 

50 

x 

127 

M 




LS 

LE 

LH 






(SEE PAGE 62) 






RE - ROD EYE 


(SEE PAGE 61) 





(SEE PAGE 61) 





(SEE PAGE 61)

152mm (6.0") Bore 

Non Magnetic 


MODEL 

LS 


PUSH 181,46 cm ² (28.2 in ² ) 

_,D 10mm - 100mm 51,0(2.00") 

PULL 176,55 cm ² (27.45 in ² ) 

177,0(6.97") 

116,7(4.596") 

W 

58,4 

(2.298") 

5,0(.197") 

19,8(.78") 

(2 PLACES) 

"A" 

+ STROKE 


"B" 

"C" 

"D" 

G1/8 PORT 

M16X2,0 

M8X1,25 

1/8-27 

5/8-18 

5/16-18 

TYPE D 

5,0(.197") 

+ STK. 


W 

X 

Z 

58,4 

(2.298") 

116,7 

(4.596") 

Z 

X 


W 

Y 

Z 

X 

Non Magnetic 


MODEL 

LS 

25,0(Ø.984") ROD 

"C" TAP 

Y 

"D" TAP X 19.8(.78") DP 

(4 PLACES) 


_,D 10mm - 40mm 

PUSH 181,46 cm ² (28.2 in ² ) 

51,0(2.00") 

PULL 176,55 cm ² (27.45 in ² ) 

"B" PORT 

(2 PLACES) 

"B" 

"C" 


G1/8 PORT 1/8-27 

M16X2,0 5/8-18 

Y 

177,0(6.97") 

116,7(4.596") 

58,4 

(2.298") 

5,0(.197") 

19,8(.78") 

(2 PLACES) 

"A" 

+ STROKE 

TYPE D 

5,0(.197") 

+ STK. 

W 

116,7 

(4.596") 

58,4 

(2.298") 

Z 

X 

25,0(Ø.984") ROD 

"C" TAP 

Y 


(4 PLACES) 

"B" PORT 

(2 PLACES) 

152 

x 


LS 

LE 


LH 




(SEE PAGE 62) 







RE - ROD EYE 

(SEE PAGE 61) 









(SEE PAGE 61) 


(SEE PAGE 61) 

51

152mm (6.0") Bore 

Magnetic 


MODEL 

LS 

SENSOR 

MOUNTING 

TRACK 


_,D 

10mm - 100mm 

177,0(6.97") 

116,7(4.596") 

W 

58,4 

(2.298") 

PUSH 181,46 cm ² (28.2 in ² ) 

61,0(2.40") 

PULL 176,55 cm ² (27.45 in ² ) 

5,0(.197") 

19,8(.78") 

(2 PLACES) 

"A" 

+ STROKE 


"B" G1/8 PORT 1/8-27 

"C" M16X2,0 5/8-18 

"D" M8X1,25 5/16-18 

TYPE D 

5,0(.197") 

+ STK. 


W 

X 

Z 

58,4 

(2.298") 

116,7 

(4.596") 

Z 

X 


W 

Y 

25,0(Ø.984") ROD 

"C" TAP 

Magnetic 


MODEL 

LS 

Y 

"D" TAP X 19.8(.78") DP 

(4 PLACES) 


PUSH 181,46 cm ² (28.2 in ² ) 

_,D 10mm - 30mm 61,0(2.40") 

PULL 176,55 cm ² (27.45 in ² ) 

"B" PORT 

(2 PLACES) 

"B" 

"C" 

Z 


G1/8 PORT 1/8-27 

M16X2,0 5/8-18 

Y 

X 

SENSOR 

MOUNTING 

TRACK 

177,0(6.97") 

116,7(4.596") 

W 

58,4 

(2.298") 

5,0(.197") 

19,8(.78") 

(2 PLACES) 

"A" 

+ STROKE 

TYPE D 

5,0(.197") 

+ STK. 

116,7 

(4.596") 

58,4 

(2.298") 

Z 

X 

25,0(Ø.984") ROD 

"C" TAP 

Y 


(4 PLACES) 

"B" PORT 

(2 PLACES) 

52 

x 

MODEL 

152 

BORE STROKE TYPE MOUNTING 

M 

MAGNETIC OPTIONS 




LS 

LE 

LH 






(SEE PAGE 62) 






RE - ROD EYE 


(SEE PAGE 61) 





(SEE PAGE 61) 





(SEE PAGE 61)

Cylinder 

Accessories 

12mm - 152mm Bore 

ACCESSORIES

Solid State Limit Sensors 

Solid State Limit Sensors 

Nason limit sensors are 

magnetically activated 

digital output devices. 

They are on/off devices 

used to sense piston 

location on Nason "L" 

series cylinders. A 

magnet is added to the 

piston of the cylinder and 

a 60∞dovetail is machined 

into the cylinder body to 

allow the sensors to be 

added. Magnetoresitive 

technology (similar to Hall 

Effect) is used to produce 

the sensors. This results 

in greater sensitivity and 

reduced dead-band 

compared to Hall devices. 

Specifications 

Part Number SKS, SKP SCS, SCP 

Switch Logic 

Solid State Output, 

Normally Open 


Normally Open 

Sensor Type NPN, Current Sinking PNP, Current Sourcing 

Operating Voltage 

5-28 VDC 

Switching Current 

200mA max. 

Voltage Drop 

1.0 V max 

Switching Power 

4.8 Watts max. 

LED Indicator: 

Switch Active 

Red 

Operating Temperature 

-20∞C to 80∞C (-4∞F to 176∞F) 

Switching Speed 

4 uS operate, 4 uS release 

Enclosure Classification IP67, NEMA 6 

Cable 

2.6 dia, 3C, 26 AWG, Black PVC 

Housing 

Glass-filled Polypropylene 

Shock 

50 G max 

Vibration 

9 G max 

Flying Lead Sensors - Part #: SKS, SCS 

11,0 

(.43") 19,0 

(.75") 

2,75 METER 

(108") 

WIRING: 

BROWN (+) 

BLACK (O) 

BLUE (-) 

6,4 

(.25") LED 

LOCKING SCREW 

UNDER CABLE 

ÿ 2,6mm 

(.10") 

Quick Disconnect Sensors - Part #: SKP, SCP 

11,0 

(.43") 

19,0 

(.75") 

0,15 METER 

(6.0") 

WIRING: 

PIN 1 (+) 

PIN 4 (O) 

PIN 3 (-) 

6,4 

(.25") 

LED 

LOCKING SCREW 

UNDER CABLE 

4 

1 

ÿ 2,6mm 

(.10") M8x1 

3 PIN MALE CONNECTOR 

3 

Mates with Part Number "SR" sensor receptacle. See page 56. 

54

Sensor Low Profile 

Low Profile Solid State Limit Sensors 

Nason limit sensors are 

magnetically activated digital 

output devices. They are 

on/off devices used to sense 

piston location on Nason "C" 

series cylinders. A magnet is 

added to the piston of the 

cylinder and a dovetail is 

machined into the cylinder 

body to allow the sensors to 

be added. Magnetoresitive 

technology (similar to Hall 

Effect) is used to produce the 

sensors. This results in 

greater sensitivity and reduced 

dead-band compared to Hall 

devices. 


Part Number NPL, NPP PNL, PNP 

Switch Logic 


Normally Open 


Normally Open 

Sensor Type NPN, Current Sinking PNP, Current Sourcing 

Operating Voltage 

5-28 VDC 

Current Consumption: 

On 

Off 

Switching Current 

Voltage Drop 

Response Frequency 

16mA @ 24 VDC 14mA @ 24 VDC 

7mA @ 24 VDC 7mA @ 24 VDC 

100mA @ 24 VDC, 30mA @ 5 VDC 

1.5 V max @ 100mA 

1 KHz max 

LED Indicators: 

Power On 

Switch Active 

Green 

Red 

Operating Temperature 

-10∞C to 70∞C (14∞F to 158∞F) 

Circuit Protection 

Reverse Polarity, Surge Suppression 

Enclosure Classification 

IEC 529 IP67, NEMA 6P 

Cable 

3.3 dia, 3C, 24 AWG, Black PVC 

Housing Zinc Diecast - Black Zinc Diecast - Silver 

Shock 

50 G max 

Vibration 

9 G max 

Flying Lead Sensors - Part #: NPL, PNL 

6,0 

(.24") 

LOCKING 

SCREW 

1,0 METER 

(39.27") 

WIRING: 

BROWN (+) 

BLACK (O) 

BLUE (-) 

14,0 (.55") 

P S 

14,2 

(.56") 

ÿ 3,3 

(.13") 

LED INDICATORS 

Quick Disconnect Sensors - Part #: NPP, PNP 

6,0 

(.24") 

LOCKING 

SCREW 

0,15 METER 

(6.0") 

WIRING: 

PIN 1 

PIN 4 

PIN 3 

(+) 

(O) 

(-) 

14,0 (.55") 

P S 

14,2 

(.56") 

LED INDICATORS 

ÿ 3,3 

(.13") 

4 

1 

M8x1 

3 PIN MALE CONNECTOR 

3 

Mates with Part Number "SR" sensor receptacle. See page 56. 

55

Sensor Receptacle 

Sensor Receptacle 

8mm female molded locking connector 

Mates with SCP, SKP, NPP, PNP Sensors 

Part #: SR 

5,0 METER 

(196") 

32,0 

(1.26") 

WIRING: 

BROWN, PIN 1 

BLACK, PIN 4 

BLUE, PIN 3 

(+) 

(O) 

(-) 

4 

3 

1 

ÿ 4,5 

(.18") 

ÿ 9,7 

(.38") 

M8x1 

3 SOCKET FEMALE CONNECTOR 

Sensor Schematics 

PNP (Sourcing) output sensors complete a circuit by 

connecting the load to the supply current. These sensors 

are typically used on controllers with a single power 

supply. All sensors will utilize the same supply voltage. 

+5 to +28 VDC 

NPN (Sinking) output sensors complete a circuit 

by connecting the load to ground. These sensors 

are typically used on controllers with multiple power 

supplies. All sensors can utilize different supply 

voltages. The ground is their common factor. 

+5 to +28 VDC 

SCS, SCP, 

PNL, PNP 

SENSORS 

BROWN + 

BLACK O 

LOAD 

SKS, SKP, 

NPL, NPP 

SENSORS 

BROWN + 

BLACK O 

LOAD 

PNP (SOURCING) OUTPUT 

(Shown not activated) 

BLUE - 

NPN (SINKING) OUTPUT 

(Shown not activated) 

BLUE - 

Important Notes 

- All Nason sensors are magnetically activated devices. Cylinders should be ordered with option "M" for a magnetic piston. 

- Presence of electromagnetic fields, external magnets, welding fields, etc. may effect operation of Nason sensors. 

- Temperature ratings for sensors should be observed and will override seal option temperature ratings of the cylinder. 

56

Alignment Couplers 

"F" DIA. 

"D" 

"G" DIA 

"E" 

Features 

• Hardened Steel Components with 

Black Oxide Finish 

"C" 

LATERAL ADJUSTMENT 

(FROM CENTERLINE) 

"H" 

WRENCH FLAT 

1∞MAX. 

• 0,15mm (.006") Max. Axial Play 

• Temperature rating -10∞C to 204∞C 

(0∞F to 400∞F) 

"J" HEX 

FOR MALE THREAD 

"B" FEMALE THREAD 

"A" MALE THREAD 

Load Rating 

Bore A B C D E F G H J Max Pull 

Part Number Male Thread Female Thread 5 X S.F. 

AC-M4 

AC-M4-C8 

AC-C8 

AC-C8-M4 

AC-M5 

AC-M5-F10 

AC-M5-C10 

AC-F10 

AC-F10-M5 

AC-F10-C10 

AC-C10 

AC-C10-M5 

AC-C10-F10 

AC-M6 

AC-M6-C14 

AC-M6-F14 

AC-C14 

AC-C14-M6 

AC-C14-F14 

AC-F14 

AC-F14-M6 

AC-F14-C14 

AC-M8 

AC-M8-C516 

AC-M8-F516 

AC-C516 

AC-C516-M8 

AC-C516-F516 

AC-F516 

AC-F516-M8 

AC-F516-C516 

AC-M10 

AC-M10-F38 

AC-M10-C38 

AC-F38 

AC-F38-M10 

AC-F38-C38 

AC-C38 

AC-C38-M10 

AC-C38-F38 

AC-M12 

AC-M12-C12 

AC-M12-F12 

AC-C12 

AC-C12-M12 

AC-C12-F12 

AC-F12 

AC-F12-M12 

AC-F12-C12 

M4x0,7 X 6,3mm 

M4x0,7 X 6,3mm 

#8-32 X .31" 

#8-32 X .31" 

M5x0,8 X 8,4mm 

M5x0,8 X 8,4mm 

M5x0,8 X 8,4mm 

#10-32 X .31" 

#10-32 X .31" 

#10-32 X .31" 

#10-24 X .31" 

#10-24 X .31" 

#10-24 X .31" 

M6x1,0 X 9,5mm 

M6x1,0 X 9,5mm 

M6x1,0 X 9,5mm 

1/4-20 X .41" 

1/4-20 X .41" 

1/4-20 X .41" 

1/4-28 X .41" 

1/4-28 X .41" 

1/4-28 X .41" 

M8x1,25 X 13,7mm 

M8x1,25 X 13,7mm 

M8x1,25 X 13,7mm 

5/16-18 X .54" 

5/16-18 X .54" 

5/16-18 X .54" 

5/16-24 X .54" 

5/16-24 X .54" 

5/16-24 X .54" 

M10X1,5 X 13,7mm 

M10x1,5 X 13,7mm 

M10x1,5 X 13,7mm 

3/8-24 X .54" 

3/8-24 X .54" 

3/8-24 X .54" 

3/8-16 X .54" 

3/8-16 X .54" 

3/8-16 X .54" 

M12x1,75 X 21,8mm 

M12x1,75 X 21,8mm 

M12x1,75 X 21,8mm 

1/2-13 X .88" 

1/2-13 X .88" 

1/2-13 X .88" 

1/2-20 X .88" 

1/2-20 X .88" 

1/2-20 X .88" 

M4x0,7 X 5,5mm 

#8-32 X .22" 

#8-32 X .22" 

M4x0,7 X 5,5mm 

M5x0,8 X 8,0mm 

#10-32 X .31" 

#10-24 X .31" 

#10-32 X .31" 

M5x0,8 X 8,0mm 

#10-24 X .31" 

#10-24 X .31" 

M5x0,8 X 8,0mm 

#10-32 X .31" 

M6x1,0 X 11,0mm 

1/4-20 X .44" 

1/4-28 X .44" 

1/4-20 X .44" 

M6x1,0 X 11,0mm 

1/4-28 X .44" 

1/4-28 X .44" 

M6x1,0 X 11,0mm 

1/4-20 X .44" 

M8x1,25 X 12,0mm 

5/16-18 X .50" 

5/16-24 X .50" 

5/16-18 X .50" 

M8x1,25 X 12,0mm 

5/16-24 X .50" 

5/16-24 X .50" 

M8x1,25 X 12,0mm 

5/16-18 X .50" 

M10x1,5 X 14,0mm 

3/8-24 X .56" 

3/8-16 X .56" 

3/8-24 X .56" 

M10x1,5 X 14,0mm 

3/8-16 X .56" 

3/8-16 X .56" 

M10x1,5 X 14,0mm 

3/8-24 X .56" 

M12x1,75 X 22,0mm 

1/2-13 X .88" 

1/2-20 X .88" 

1/2-13 X .88" 

M12x1,75 X 22,0mm 

1/2-20 X .88" 

1/2-20 X .88" 

M12x1,75 X 22,0mm 

1/2-13 X .88" 

0,5 

(.02") 

0,8 

(.03") 

0,8 

(.03") 

0,8 

(.03") 

0,8 

(.03") 

1,5 

(.06") 

10,3 

(.40") 

14,3 

(.56") 

19,3 

(.76") 

21,0 

(.83") 

24,0 

(.95") 

33,5 

(1.33") 

8,7 

(.34") 

10,3 

(.41") 

14,3 

(.56") 

16,0 

(.63") 

19,0 

(.75") 

28,5 

(1.13") 

14,0 

(.55") 

19,0 

(.75") 

28,5 

(1.13") 

28,5 

(1.13") 

28,5 

(1.13") 

38,0 

(1.50î ) 

6,0 

(.24") 

8,0 

(.31") 

12,7 

(.50") 

12,7 

(.50") 

16,0 

(.63") 

19,0 

(.75") 

5,0 

(.20") 

7,0 

(.28") 

11,0 

(.43") 

11,0 

(.43") 

14,0 

(.55") 

17,0 

(.67") 

2,5 

5/64 

3 

3/32 

4 

1/8 

5 

5/32 

6 

3/16 

8 

1/4 

.67 kN 

(150 lbs.) 

1.11 kN 

(250 lbs.) 

3.55 kN 

(800 lbs.) 

4.66 kN 

(1050 lbs.) 

7.11 kN 

(1600 lbs.) 

15.55 kN 

(3500 lbs.) 

57

Front Flanges 

Face Flange Mounting - "FF" & "FR" 

12mm Thru 76mm Bores 

"A" 

"F" 

FLANGES CAN BE 

ROTATED 90∞ 

"B" 

"H" 

"G" 

"C" 

"D" 

Material: Anodized Aluminum 

"E" 

(2 PLACES) SHOWN AS "FF" 

FRONT FLANGE 

USE "FR" FOR REAR FLANGE 

Face Flange Mounting - "FF" & "FR" 


"A" SQ. 

"C" 

"D" 

"B" 

"C" 

"F" 

"D" 

12∞(127mm 

BORE ONLY) 

"E" 

(4 PLACES) 

Material: 

101mm Bore - Anodized Aluminum 

127mm & 152mm Bore - Zinc Plated Steel 

"F" 

SHOWN AS "FR" 

USE "FF" FOR FRONT FLANGE 

58 

BORE "A" "B" "C" "D" "E" "F" "G" "H" 

12 6,4 (.25") 22,2 (0.88") 11,1 (.44") 

5,4 (.21") 40,0 (1.58") 

20 50,8 (2.0") 

4,5 (.18") 25,4 (1.0") 31,8 (1.25") 15,9 (.63") 

9,5 (.38") 

25 

3,9 (.15") 43,0 (1.69") 

38,1 (1.50") 19,05 (.75") 

28,5 

6,4 (.25") 6,4 (.25") 50,8 (2.00") 

63,5 (2.5") 

31,8 (1.25") 

32 

5,75 (.23") 52,0 (2.05") 5,5 (.22") 

44,5 (1.75") 22,25 (.88") 

9,5 (.38") 

40 76,2 (3.0") 

8,1 (.32") 60,0 (2.36") 

38,1 (1.50") 50,8 (2.00") 25,4 (1.00") 

50 93,0 (3.66") 

7,5 (.30") 78,0 (3.07") 8,5 (.33") 46,5 (1.83") 63,5 (2.50") 31,8 (1.25") 

12,7 (.50") 

63 120,0 (4.72") 

102,0 (4.02") 

59,9 (2.36") 76,2 (3.00") 38,1 (1.50") 

9,0 (.35") 

10,5 (.41") 

76 133,1 (5.24") 

115,1 (4.53") 

66,5 (2.62") 88,9 (3.50") 44,45 (1.75") 

19,05 (.75") 

101 127,0 (5.0") 

9,5 (.38") 108,0 (4.25") 8,64 (.34") 63,5 (2.50") 

127 

N/A N/A 

177,8 (7.0") 9,5 (.38") 12,7 (.50") 152,4 (6.00") 10,5 (.41") 88,9 (3.50") 

152

Side Flange Mounting 

Side Flange Mounting - "FS" 


"F" 

"B" 

"G" 

"E" 

SEE CYLINDER PAGES 

FOR SECOND BRACKET 

REQUIREMENTS 

"A" 

"D" 

"C" 


Bore "A" "B" "C" "D" "E" "F" "G" 

12 44,5 (1.75") 6,35 (.25") 4,8 (.19") 35 (1.38") 16 (.63") 7,9 (.31") 

20 

5,4 (.21") 40 (1.58") 4,5 (.18") 

50,8 (2.0") 9,5 (.38") 

25 

3,9 (.15") 43 (1.69") 

19 (.75") 9,5 (.38") 

28,5 

4,8 (.19") 6,35 (.25") 50,8 (2.0") 5,5 (.22") 

63,5 (2.5") 

32 

5,75 (.23") 52 (2.05") 

9,5 (.38") 

5,5 (.22") 

40 76,2 (3") 8,1 (.32") 60 (2.36") 

50 93 (3.66") 12,7 (.50") 7,5 (.30") 78 (3.07") 8,5 (.33") 25,4 (1.00") 12,7 (.50") 

63 120 (4.72") 102 (4.02") 

19 (.75") 9,0 (.35") 

76 133 (5.24") 

115 (4.53") 

10,5 (.41") 

End Flange Mounting - "FE" 


"B" 

"G" 

"F" 


FOR SECOND BRACKET 

REQUIREMENTS 

"E" 

"A" 

"D" 

"C" 

"H" 


Bore "A" "B" "C" "D" "E" "F" "G" 

12 25,4 (1.00") 6,35 (.25") 4,2 (.17") 17,0 (.67") 24,0 (.95") 

20 31,8 (1.25") 

4,4 (.17") 23,0 (.91") 4,5 (.18") 

4,0 (.16") 8,0 (.32") 

9,5 (.38") 

27,0 (1.06") 

25 38,1 (1.50") 

4,05 (.16") 30,0 (1.18") 

28,5 38,1 (1.50") 4,8 (.19") 4,8 (.19") 28,6 (1.13") 5,6 (.22") 28,6 (1.13") 4,8 (.19") 9,7 (.38") 

32 44,5 (1.75") 5,0 (.20") 34,5 (1.36") 

9,5 (.38") 

40 50,8 (2.00") 4,9 (.19") 41,0 (1.61") 

5,5 (.22") 35,4 (1.39") 5,0 (.20") 10,0 (.39") 

50 63,5 (2.50") 12,7 (.50") 8,0 (.32") 47,5 (1.87") 8,5 (.33") 41,4 (1.63") 8,0 (.32") 16,0 (.63") 

63 76,2 (3.00") 10,1 (.40") 56,0 (2.20") 

19 (.75") 

76 88,9 (3.50") 

9,95 (.39") 69,0 (2.72") 

10,5 (.41") 45,4 (1.79") 10,0 (.39") 20,0 (.79") 

59

Pivot 

Long Pivot 

Mounting Style - "PL" 

"F" 

"A" 

"G" 

"N" 

"H" ÿ PIN 

"C" ÿ 

"D" 

"E" 

"B" 

"L" 

"M" 

"J" 

"K" 

Bore "A" "B" "C" "D" "E" "F" 

20 48,8 (1.92") 

5,4 (.21") 20 (.79") 31.8 (1.25") 25 (.98") 

25 52,8 (2.08") 

6,35 (.25") 

28.5 48,3 (1.90") 5,5 (.22") 27 (1.06") 38,1 (1.50") 25,4 (1.0") 

32 54,9 (2.16") 

22 (.87") 31.8 (1.25") 

6,8 (.27") 

25 (.98") 

40 58,7 (2.31") 27 (1.06") 38,1 (1.50") 

50 65,8 (2.59") 34 (1.34") 50,8 (2.00") 35 (1.38") 

9,53 (.38") 

63 67,8 (2.67") 

8,7 (.34") 

46 (1.81") 63,5 (2.50") 40 (1.58") 

76 73,7 (2.90") 

"G" "H" "J" "K" "L" "M" "N" 

12,5 (.49") 8,0 (.32") 6,0 (.24") 13 (.51") 25,0 (.98") 7,0 (.28") 

12,7 (.50") 7,9 (.31") 6,35 (.25") 12,7 (.50") 25,4 (1.0") 9,7 (.38") 

12,5 (.49") 8,0 (.32") 6,0 (.24") 13 (.51") 

28,0(1.10") 

9,0 (.35") 

30,0 (1.18") 

17,5 (.69") 8,0 (.32") 19 (.75") 

20,0 (.79") 

36,0 (1.42") 13,0 (.51") 

23,0 (.91") 

25,0 (.98") 

10,0 (.39") 

40,0 (1.58") 

10,0 (.39") 20 (.79") 40,0 (1.58") 16,0 (.63") 

- LONG PIVOTS ALLOW FOR A MINIMUM 180∞OF MOVEMENT 

- LONG PIVOTS ARE ANODIZED ALUMINUM WITH SINTERED BRONZE BEARINGS 

- PIVOT PINS ARE STEEL WITH STEEL COTTER PIN, INCLUDED 

Pivot on Rear Face 

Mounting Style - "PR" 

"A" 

"C" 

"B" 

"H" 

ÿ "D" 

"E" 

"G" RADIUS 

ÿ "F" DIA. 

Bore "A" "B" "C" "D" "E" "F" "G" "H" 

12 20 (.79") 5,9 (.23") 6 (.24") 12 (.47") 6 (.24") 5 (.20") 13,9 (.55") 10,9 (.43") 

20 

12 (.47") 

14 (.55") 

23 (.91") 

22 (.87") 11 (.43") 8 (.32") 

25 

15,5 (.61") 12,5 (.49") 

28.5 

12 (.47") 

7,9 (.31") 

16 (.63") 

32 25 (.98") 

25 (.98 ") 12,5(.49") 

16 (.63") 

8 (.32") 

12 (.47") 

40 

50 

23 (.91") 

19 (.75") 35 (1.38") 17,5 (.69") 

63 40 (1.58") 14 (.55") 

10 (.39") 25 (.98") 

21 (.83") 

76 

25 (.98") 40 (1.58") 20 (.79") 

60 

- REAR PIVOT CAN BE ROTATED 90∞ 

- REAR PIVOT OPTION IS ONLY AVAILABLE ON SINGLE END MODELS ONLY 

- REAR PIVOTS ARE ANODIZED ALUMINUM WITH A SINTERED BRONZE BEARING

Rod End Options 

Rod Eye 

Option - "RE" 

"A" SQ. 

"C" 

"B" 


FOR THREAD SIZE 

"D" 

Bore "A" "B" "C" "D" "E" "F" 

12 7,9(.31") 8,0(.32") 4,0(.16") 3,96(.156") 3,0(.119") 5,0(.20") 

20 

12 (.47") 6 (.24") 

25 12,7 (.50") 

6,35 (.25") 

5 (.20") 8 (.32") 

28,5 12,7(.50") 6,35(.25") 6,35(.25") 7,6(.30") 

32 

40 

16 (.63") 20 (.79") 10 (.39") 8 (.32") 8 (.32") 12 (.47") 

50 

19 (.75") 

9,5 (.38") 

63 

25 (.98") 12,5 (.49") 

10 (.39") 14 (.55") 

76 25,4 (1.00") 

12,7 (.50") 

"F" RADIUS 

"E" 

Rod Extensions 

Option - See Chart Below 

"EXTENSION" 

STD. EX. 

Extension 

Length 

"RF" "RT" "RN" "RY" "RV" "RH" 

5 (.20") 10 (.39") 15 (.59") 20 (.79") 25 (.98") 35 (1.38") 

TYPE "D" 

CYLINDER 

For standard extension, see catalog pages. 

If cylinder is double ended, extension will be on both ends. 

Consult factory for single ended extension on a double ended cylinder. 

STD. EX. 

+ STROKE 

"EXTENSION" 

Rod Stud 

Option - "RS" 

STD. EXT. 

THREAD LENGTH 

(2 X THD. DIAMETER) 

THREAD SIZES STANDARD 

PER CATALOG PAGES 

Bore Std. Ext. Thread Length 

12 3 (.12") 8 (.32") 

20 3 (.12") 10 (.39") 

25 

28,5 

5 (.20") 

3,2(.13") 

10 (.39") 

16(.63") 

32 

40 

50 

63 

76 

5 (.20") 

5 (.20") 

5 (.20") 

5 (.20") 

5 (.20") 

12 (.47") 

16 (.63") 

20 (.79") 

24 (.95") 

24 (.95") 

61

Urethane Shock Pads 

Urethane Shock Pads 

Option - "UF", "UR", "UB" 

UF 

(URETHANE SHOCK PAD 

ON FRONT) 

UR 

(URETHANE SHOCK PAD 

ON REAR) 

UB 

(URETHANE SHOCK PADS 

ON BOTH ENDS) 

- Urethane shock pads available on 20mm thru 76mm Bores in models LS, LE, LH, and LC. 

- Pneumatic service only. 

- Temperature rating: -18∞C to 82∞C (0∞F -180∞F). 

- Use for increased noise reduction, minor piston impact, or high cycle rates. 

- Does not increase cylinder length. 

- Shock pads mechanically retained in cap and head. 

- Shock pads are replaceable. 

- Shock pads are NOT suitable replacements in applications requiring shock absorbers. 

Seal Options 

OPTION MATERIAL MODEL BORE SIZE PRESSURE TEMPERATURE 

RATING RATING 

BLANK 

12mm 10 BAR (150 PSI) -18∞C to 95∞C 

NITRILE 

(NO CODE) LS, LE, LH 20mm thru 76mm 17 BAR (250 PSI) (0∞F to 200∞F) 

101mm thru 152mm 14 BAR (200 PSI) 

12mm 10 BAR (150 PSI) 

FLUOROCARBON 

-18∞C to 150∞C 

HS 

LE, LH 20mm thru 76mm 17 BAR (250 PSI) 

101mm thru 152mm 14 BAR (200 PSI) (0∞F to 302∞F) 

35 BAR 

SH NITRILE LS, LE, LH 20mm thru 76mm 

-10∞C t0 70∞C 

(500 PSI) (14∞F to 158∞F) 

MEDIA 

Air 

(Clean, Dry or Lubricated) 

Air 

(Clean, Dry or Lubricated) 

Hydraulic Fluid 

(Mineral Oil, Water Polyglycal Solutions 

Water-in-Oil Emulsions) 

- Temperature and pressure ratings are based on a combination of seal materials, lubrication, and cylinder design. 

- For higher or lower temperature and/or pressure ratings, consult Nason for a custom solution. Nason has successfully designed 

cylinders to operate at temperature extremes of -40∞F and +500∞F respectively, as well pressures as low as 5 PSI and as high as 

3000 PSI. 

62

Chrome plated 

guide rods 

Sintered bronze bearing 

with non-migrating lubricant 

Fabric reinforced 

phenol resin wear strip 

Machine bore 

anodized aluminum 

housing 

Anodized aluminum 

tooling plate 

Low friction figure 

8 piston seal 

Low friction 

cupseal-integral rod 

Double wound 302 

SS retaining wire 

Magnet for position sensing 

LC SERIES NON-ROTATING LOAD CARRYING CYLINDERS 

Common Features 

Nason’s LC series of pneumatic guided load 

actuators were designed to be compact, 

long lasting, load carrying devices for today’s 

demanding design requirements. They are 

offered in various mounting styles, bores, 

and strokes to fill the need of today’s 

design engineers. 

Actuator 

The LC series guided cylinder actuator is based 

on Nason’s LH cylinder. Extended internal rod 

bearing, wear banded piston, and integral rod 

wiper are all standard. Precision machined 

components, self-lubricating bearings, and 

PTFE impregnated lubricant ensure long life 

and continued low friction operation. 

Guiding Mechanism 

Oversized, chrome plated guide rods riding in 

specially formulated sintered bronze bearings 

provide rigid load carrying capability. Guide rods 

are located externally of the sealed cylinder 

chamber but inside the overall envelope of the 

cylinder. The guide rods are extended past the 

cylinder housing to ensure no finger trap exists. 

The guide rods are piloted into the tooling plate 

to provide more rigidity and ease of disassembly 

for modification. 

Tooling Plate 

Tooling plates are thick, anodized aluminum and 

are provided with tapped through holes for direct 

mounting, or through mounting, into your part. 

Magnetic Piston Sensing 

Magnetic piston and sensor mounting tracks 

are included as standard. See the sensor 

section for Nason’s solid state sensor selection 

(sold separately). 

Rebuildable 

All LC series cylinders are field rebuildable. 

LC SERIES

How to Order 

How to Order 

Example: 

Part Number: LC-20X40MR-EMHS 

x 

LC 20 40 

MR EM HS 


MODEL 

LC - Non-Rotating, Guided Load cylinder 

BORE 

12 - 12mm (.47") 

20 - 20mm (.79") 

25 - 25mm (.98") 

28.5 - 28.5mm (1.13") 

32 - 32mm (1.26") 

40 - 40mm (1.58") 

50 - 50mm (1.97") 

63 - 63mm (2.48") 

STROKE 

See Stroke Table 

TYPE 

Blank (No Code) - Double Acting, Single Rod 

MOUNTING 




PR - Pivot on Rear Face 

OPTIONS 

EM - InchThreads (Mounting, Ports, and Tooling Plate) 


HS - High Temperature Seals -10∞C to 150∞C (0∞F to 302∞F) 

(Available on ì LEî and ì LHî Models Only) 

BP - Blank Tooling Plate (No Holes) 

PE - 1/4 Ports (Available on 50 and 63mm Bores) 

With EM Option 

UB - Urethane Shock Pads Both Ends 


UF - Urethane Shock Pad Front (Rod End) 





64





Operating Temperature: -10∞C to 95∞C (0∞F to 200∞F) 

Packing: 

Buna N 

Lubrication: 


Stroke Tolerance: +0,75mm/-0mm (+0.03"/-0") 


Bore Push 

(Rod Extend) 

Pull 

(Rod Retract) 

12 1,13 cm 2 (.18 in 2 ) 0,85 cm 2 (.14 in 2 ) 

20 3,14 cm 2 (.48 in 2 ) 2,64 cm 2 (.40 in 2 ) 

25 4,91 cm 2 (.76 in 2 ) 4,12 cm 2 (.64 in 2 ) 

28.5 6,41 cm 2 (1.0 in 2 ) 5,28 cm 2 (.82 in 2 ) 

32 8,04 cm 2 (1.25 in 2 ) 6,91 cm 2 (1.07 in 2 ) 

40 12,56 cm 2 (1.95 in 2 ) 10,55 cm 2 (1.64 in 2 ) 

50 19,63 cm 2 (3.04 in 2 ) 17,62 cm 2 (2.73 in 2 ) 

63 31,17 cm 2 (4.83 in 2 ) 28,03 cm 2 (4.34 in 2 ) 

Stock Stroke Table 

Bore 

12 

20 

25 

28.5 

32 

40 

50 

63 

Standard Stroke Lengths 

15, 25, 40 

15, 25, 40, 50 

12.7, 25.4, 38.1, 50.8 

15, 25, 40, 50 

15, 25, 40, 50, 75 

LOAD kg (lbs) 

10.89 (24) 

10.43 (23) 

9.98 (22) 

9.53 (21) 

9.07 (20) 

8.62 (19) 

8.16 (18) 

7.71 (17) 

7.25 (16) 

6.80 (15) 

6.35 (14) 

5.90 (13) 

5.44 (12) 

4.99 (11) 

4.54 (10) 

4.08 (9) 

3.63 (8) 

3.18 (7) 

2.72 (6) 

2.27 (5) 

1.81 (4) 

1.36 (3) 

.91 (2) 

.45 (1) 

.34 (.75) 

.23 (.50) 

.11 (.25) 

0 

Load Chart 

1. Loads based on .08mm (.003") deflection 

up to 25mm stroke and .16mm (.006") 

deflection over 25mm stroke and maximum 

life. 

2. Rotational tolerance = +/ñ .5 degree 

3. Speed controls or external shock 

absorbers are recommended to reduce 

impact and extend cylinder life. 

LC-40 

LC-28.5 

LC-32 

LC-20 

LC-12 

LC-63 

LC-50 

LC-25 

5 (.20) 15 (.59) 25 (.98) 40 (1.57) 50 (1.97) 75 (2.95) 

STROKE mm (in) 








65

LC 12mm (1/2") Bore 


MODEL 

LC 


15mm 

25mm 

40mm 

"A" PISTON AREA Standard Threads "EM" Option 

PUSH 1,13 cm ≤ (0.18 in ≤ ) 

"B" M4X0,7 #8-32 

36,0(1.42") 

"C" M5X0,8 #10-32 

PULL 0,85 cm ≤ (0.14 in ≤ ) 

"D" M4X0,7 #8-32 

19,0 SQ. 

(.75") 

8,0(.32") 

"A" 

+ STK. 

2,5(.10") 

20,0 SQ. 

(.79") 

W 

12,0(.47") 

6,0(.24") 

6,0(.24") 

7,6(.30") 

6,4(.25") 

(2 PLACES) 

4,1(.17") 

13,5(.53") 3,3(.13") 

3,3(.13") 

Z 

X 

12,0(.47") 

13,5(.53") 

Y 

"B" TAP THRU 

(2 PLACES) 

8,0(ÿ .315") X 

2,5(.10") DP 

"C" PORT 

(2 PLACES) 

"D" TAP X 10,4(.41") DP 

(2 PLACES) 

SENSOR TRACK 

(2 PLACES, 

180∞APART) 


MODEL 

LC 


15mm 

25mm 

40mm 


PUSH 1,13 cm ≤ (0.18 in ≤ ) 

"B" M4X0,7 #8-32 

36,0(1.42") 

"C" M5X0,8 #10-32 

PULL 0,85 cm ≤ (0.14 in ≤ ) 

"D" M3X0,5 #4-40 

8,0(ÿ .315") X 1,5(.06") DP 

9,0(.35") 

8,0(ÿ .315") X 

2,5(.10") DP 

19,0 SQ. 

(.75") 

12,0(.47") 

6,0(.24") 

8,0(.32") 

7,6(.30") 

"A" 

+ STK. 

6,4(.25") 

(2 PLACES) 

7,0(.28") 

W 

6,0(.24") 

4,1(.17") 

10,0(.39") 

Z 

X 

12,0(.47") 

"D" TAP X 4,5(.18") DP 

(2 PLACES) 

Y 

SENSOR TRACK 

(2 PLACES, 

180∞APART) 

"C" PORT 

(2 PLACES) 

8,0 

(.31") 

4,0(.16") 

"B" TAP THRU 

(2 PLACES) 

LC 

12 

x 

MODEL BORE STROKE MOUNTING OPTIONS 


(SEE CHART ABOVE) 




PR - PIVOT REAR 

(SEE PAGE 58-60 FOR DETAILS) 



LIMIT SENSORS 

(SEE CATALOG PAGE 54 FOR DETAILS) 

EM - INCH THREADS & PORT OPTIONS: 



BP - BLANK TOOLING PLATE 

66

LC 20mm (3/4") Bore 


MODEL 

LC 

13,5 

(.53") 


15mm 

PUSH 3,14 cm ≤ (0.48 in ≤ ) 

25mm 

_,D 

33,5(1.32") 

40mm 

PULL 2,64 cm ≤ (0.40 in ≤ ) 

50mm 

W 

30,25(1.19") 

SQ. 

6,75(.27") 

6,75(.27") 

9,15(.36") 

13,0(.51") 

"A" 

+ STK. 

TYPE D 

13,0(.51") 

+ STK 

"B" 

"C" 

"D" 

6,9(.27") 

(2 PLACES) 

6,4(.25") 


M4X0,7 

"EM" Option 

#8-32 

M5X0,8 #10-32 

M5X0,8 #10-32 

21,0 

(.83") 

31,75(1.25") 

SQ. 

5,37(.21") 

5,37 

(.21") 

Z 

X 

13,5(.53") 

21,0 

(.83") 

Y 

"B" TAP THRU 

(2 PLACES) 

10,0(ÿ .394) X 

2,5(.10") DP 

"C" PORT 

(2 PLACES) 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"D" TAP X 11,2(.44") DP 

(2 PLACES) 


MODEL 

LC 


15mm 

PUSH 3,14 cm ≤ (0.48 in ≤ "B" M4X0,7 #8-32 

) 

25mm 

"C" M5X0,8 #10-32 

_,D 

33,5(1.32") 

40mm 

PULL 2,64 cm ≤ (0.40 in ≤ ) 

"D" M4X0,7 #8-32 

50mm 

8,0(ÿ .315") X 2,5(.10") DP 

10,0(.39") 

8,0(.32") 

30,25(1.19") 

SQ. 

13,5 

(.53") 

10,0(ÿ .394") X 

2,5(.10") DP 

W 

6,75(.27") 

9,15(.36") 

6,75(.27") 

13,0(.51") 

"A" 

+ STK. 

TYPE D 

13,0(.51") 

+ STK 

6,9(.27") 

(2 PLACES) 

6,4 

(.25") 

Z 

X 

13,5(.53") 

13,0(.51") 

"D" TAP X 5,8(.23") DP 

(2 PLACES) 

5,0(.20") 

10,0(.39") 

Y 

"B" TAP THRU 

(2 PLACES) 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) 

LC 20 

x 




LIMIT SENSORS 




BLANK - NO CODE 

D - DOUBLE ROD 

(SEE PAGE 64 FOR DETAILS) 












67

LC 25mm (1.0") Bore 


MODEL 

LC 


15mm 

25mm 

PUSH 4,91 cm ≤ (0.76 in ≤ ) 

_,D 

34,0(1.34") 

40mm 

PULL 4,12 cm 

50mm 

≤ (0.64 in ≤ ) 


"B" 

"C" 

M5X0,8 

M5X0,8 

#10-32 

#10-32 

"D" M5X0,8 #10-32 

"E" M6X1,0 1/4-20 

"B" TAP THRU 

(2 PLACES) 

21,0 

(.83") 

W 

33,5(1.32") 

SQ. 

10,5(.41") 

10,0(ÿ .394") X 

2,5(.10") DP 

10,5(.41") 

15,0 

(.59") 

9,15 

(.36") 

"A" 

+ STK. 

TYPE D 

15,0(.59") 

+ STK 

6,9(.27") 

(2 PLACES) 

6,1(.24") 

25,5 

(1.00") 

35,0(1.38") 

SQ. 

4,75(.19") 

4,75 

(.19") 

13,5(.53") 

Z 

X 

21,0(.83") 

25,5 

(1.00") 

6,75(.27") 

"E" TAP THRU 

(2 PLACES) 

Y 

6,75(.27") 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) "D" TAP X 11,2(.44") DP 

(2 PLACES) 

13,5(.53") 


MODEL 

LC 


15mm 

"B" M5X0,8 #10-32 

25mm 

PUSH 4,91 cm ≤ (0.76 in ≤ ) 

"C" M5X0,8 #10-32 

_,D 

34,0(1.34") 

40mm 

"D" M4X0,7 #8-32 

PULL 4,12 cm 

50mm 

≤ (0.64 in ≤ ) 

"E" M6X1,0 1/4-20 

33,5(1.32") 

SQ. 

15,0 

(.59") 

"A" 

+ STK. 

8,0(ÿ .315") X 

2,5(.10") DP 

21,0 

(.83") 

10,5(.41") 

9,15 

(.36") 

TYPE D 

15,0(.59") 

+ STK 

12,0(.47") 

9,5 

(.37") 

"B" TAP THRU 

(2 PLACES) 

W 

10,0(ÿ .394") X 

2,5(.10") DP 

10,5(.41") 

6,9(.27") 

(2 PLACES) 

6,1(.24") 

14,0(.55") 

13,5(.53") 

Z 

X 

21,0(.83") 

6,0 

(.24") 

12,0 

(.47") 

"D" TAP X 5,8(.23") DP 

(2 PLACES) 

6,75(.27") 

"E" TAP THRU 

(2 PLACES) 

13,5(.53") 

Y 

6,75(.27") 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) 

LC 25 

x 




LIMIT SENSORS 


68 
















(SEE CATALOG PAGE 62 FOR DETAILS)

LC 28,5mm (1-1/8") Bore 


MODEL 

LC 


12,7(.50") 

PUSH 6,41 cm 

25,4(1.00") 

≤ (0.99 in ≤ ) 

_,D 

38,1(1.50") 

38,1(1.50") 

PULL 5,28 cm 

50,8(2.00") 

≤ (0.82 in ≤ ) 

20,2(.80") 

4,06(.16") DRILL THRU 

(2 PLACES) 

11,9(.47") 

Z 

W 

X 

36,6(1.44") 

SQ. 

10,1(.40") 

12,7(ÿ .500") X 

3.0(.12") DP 

10,1(.40") 

20,2(.80") 

16,0(.63") 

9,15 

(.36") 

"A" 

+ STK. 

TYPE D 

16,0(.63") 

+ STK 

7,1(.28") 

(2 PLACES) 

6,4(.25") 

28,6 

(1.13") 

38,1(1.50") 

SQ. 

28,6 

(1.13") 

4,8(.19") 

.19"(4,8) 

28,6 

(1.13") 

5,8(.23") 

5,5(.22) DRILL THRU 

(2 PLACES) 

18,3(.72") 

Y 

9,1(.36") 

SENSOR TRACK 

1/8-27 PORT 

(2 PLACES) 

1/4-20 TAP X 16,0(.63") DP 

(2 PLACES) 

3,3(.13") 

3,2(ÿ .13") X 6,4(.25") DP 

(PIN LOCATOR) 


MODEL 

LC 


12,7(.50") 

PUSH 6,41 cm 

25,4(1.00") 

≤ (0.99 in ≤ ) 

_,D 

38,1(1.50") 

38,1(1.50") 

PULL 5,28 cm ≤ (0.82 in ≤ ) 

50,8(2.00") 

#6-32 TAP X 3,8(.15") DP 

(2 PLACES) 

11,2 

(.44") 

11,2(.44") 

20,2(.80") 


(2 PLACES) 

W 

36,6(1.44") 

SQ. 

10,1(.40") 

12,7(ÿ .500") X 

3,0(.12") DP 

10,1(.40") 

16,0(.63") 

9,15 

(.36") 

"A" 

+ STK. 

TYPE D 

16,0(.63") 

+ STK 

7,1(.28") 

(2 PLACES) 

6,4 

(.25") 

22,4(.88") 

11,9(.47") 

Z 

X 

20,2(.80") 

16,7 

(.66") 

7,1(.28") 

10,4 

(.41") 

5,8(.23") 


(2 PLACES) 

Y 

9,1(.36") 

SENSOR TRACK 

1/8-27 PORT 

(2 PLACES) 

12,7(ÿ .500") X 

2,3(.09") DP 

18,3(.72") 

LC 

28,5 

x 


12,7(.50") - 50,8(2.00") 

STROKE 












LIMIT SENSORS 







69

LC 32mm (1-1/4") Bore 


MODEL 

LC 


15mm 

25mm 

PUSH 8,04 cm ≤ (1.25 in ≤ ) 

_,D 

37,5(1.48") 

40mm 

PULL 6,91 cm 

50mm 

≤ (1.07 in ≤ ) 

"B" 

"C" 

"D" 

"E" 


M5X0,8 #10-32 

G1/8 PORT 1/8-27 

M6X1,0 1/4-20 

M6X1,0 1/4-20 

21,0 

(.83") 

40,0(1.58") 

SQ. 

10,5(.41") 

9,15 

(.36") 

15,0 

(.59") 

"A" 

+ STK. 

TYPE D 

15,0(.59") 

+ STK 

8,4(.33") 

(2 PLACES) 

31,5 

(1.24") 

42,0(1.65") 

SQ. 

5,25(.21") 

"B" TAP THRU 

(2 PLACES) 

W 

12,0(ÿ .473") X 

2,5(.10") DP 

10,5(.41") 

7,1(.28") 

5,25 

(.21") 

13,5(.53") 

Z 

X 

21,0(.83") 

31,5 

(1.24") 

6,75(.27") 

"E" TAP THRU 

(2 PLACES) 

Y 

6,75(.27") 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) 

"D" TAP X 16,0(.63") DP 

(2 PLACES) 

13,5(.53") 


MODEL 

LC 


15mm 

"B" M5X0,8 #10-32 

25mm 

PUSH 8,04 cm ≤ (1.25 in ≤ ) 

"C" G1/8 PORT 1/8-27 

_,D 

37,5(1.48") 

40mm 

"D" M4X0,7 #8-32 

PULL 6,91 cm 

50mm 

≤ (1.07 in ≤ ) 

"E" M6X1,0 1/4-20 

10,0(ÿ .394") X 

2,5(.10") DP 

12,0 

(.47") 

12,5(.49") 

"B" TAP THRU 

(2 PLACES) 

21,0 

(.83") 

W 

40,0(1.58") 

SQ. 

10,5(.41") 

12,0(ÿ .473") X 

2,5(.10") DP 

10,5 

(.41") 

9,15 

(.36") 

"A" 

+ STK. 

TYPE D 

15,0(.59") 

+ STK 

15,0 

(.59") 8,4(.33") 

(2 PLACES) 

7,1(.28") 

18,2 

(.72") 

6,0(.24") 

12,0(.47") 

"D" TAP X 5,8(.18") DP 

(4 PLACES) 

25,0(.98") 

13,5(.53") 

6,75(.27") 

"E" TAP THRU 

(2 PLACES) 

13,5 

(.53") 

Z 

Y 

X 

6,75(.27") 

21,0(.83") 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) 

LC 32 

x 




LIMIT SENSORS 


70 

















LC 40mm (1-1/2") Bore 


MODEL 

LC 


15mm 

PUSH 12,56 cm 

25mm 

≤ (1.95 in ≤ ) 

_,D 

45 (1.78") 

40mm 

PULL 10,55 cm ≤ (1.64 in ≤ ) 

50mm 

"B" 

"C" 

"D" 


M6X1,0 1/4-20 

G1/8 PORT 1/8-27 

M6X1,0 1/4-20 

25,5 

(1.00") 

48,0 (1.89") 

SQ. 

12,75 (.50") 

12,45 

(.49") 

15,0 

(.59") 

"A" 

+ STK. 

TYPE D 

15,0 (.59") 

+ STK 

9,9 (.39") 

(2 PLACES) 

38,0 

(1.50") 

50,0 (1.98") 

SQ. 

6,0 (.24") 

W 

12,5 (ÿ .492") X 

2,5 (.10") DP 

12,75 (.50") 

8,7 (.34") 

6,0 

(.24") 

21,0 (.83") 

Z 

X 

25,5 (1.00") 

38,0 

(1.50") 

10,5 (.41") 

"B" TAP THRU 

(4 PLACES) 

Y 

10,5 (.41") 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) 

"D" TAP X 16,0 (.63") DP 

(2 PLACES) 

21,0 (.83") 


MODEL 

LC 


15mm 

"B" M6X1,0 1/4-20 

25mm 

PUSH 12,56 cm ≤ (1.95 in ≤ ) 

"C" G1/8 PORT 1/8-27 

_,D 

45 (1.78") 

40mm 

"D" M4X0,7 #8-32 

PULL 10,55 cm 

50mm 

≤ (1.64 in ≤ ) 

12,0 (ÿ .473") X 

2,5 (.10") DP 

12,0 

(.47") 

15,0 (.59") 

48,0 (1.89") 

SQ. 

12,5 (ÿ .492") X 

2,5 (.10") DP 

25,5 

(1.00") 

W 

12,75 (.50") 

12,75 (.50") 

15,0 

(.59") 

12,45 

(.49") 

"A" 

+ STK. 

TYPE D 

15,0 (.59") 

+ STK 

9,9 (.39") 

(2 PLACES) 

8,7 

(.34") 

22,0 

(.87") 

6,0 (.24") 

12,0 (.47") 

"D" TAP X 5,8 (.20") DP 

(4 PLACES) 

30,0 

(1.18") 

21,0 (.83") 

10,5 (.41") 

"B" TAP THRU 

(4 PLACES) 

Z 

21,0 (.83") 

Y 

X 

10,5 (.41") 

25,5 (1.00") 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) 

LC 40 

x 




LIMIT SENSORS 


















71

LC 50mm (2.0") Bore 


MODEL 

LC 

TYPE 

_,D 


15mm 

25mm 

40mm 

"A" 

48,5(1.91") 

PISTON AREA 

PUSH 19,63 cm ≤ (3.04 in ≤ ) 

50mm 

PULL 17,62 cm ≤ (2.73 in ≤ ) 

75mm 

"B" 

"C" 

"D" 

"E" 


M6X1,0 1/4-20 

G1/8 PORT 1/8-27 

M8X1,25 5/16-18 

M8X1,25 5/16-18 

31,5 

(1.24") 

"B" TAP THRU 

(2 PLACES) 

W 

61,0(2.40") 

SQ. 

15,75(.62") 

16,0(ÿ .631") X 

2,5(.10") DP 

15,75(.62") 

12,45 

(.49") 

15,0 

(.59") 

"A" 

+ STK. 

TYPE D 63,0(2.48") 

15,0(.59") 

SQ. 

+ STK 

50,0 

(1.97") 

10,9(.43") 

(2 PLACES) 

8,7(.34") 

6,5(.26") 

6,5 

(.26") 

25,5(1.00") 

Z 

X 

31,5(1.24") 

50,0 

(1.97") 

12,75(.50") 

"E" TAP THRU 

(2 PLACES) 

Y 

12,75(.50") 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) 

"D" TAP X 20,1(.79") DP 

(2 PLACES) 

25,5(1.00") 


MODEL 

LC 


15mm 

"B" M6X1,0 1/4-20 

25mm 

PUSH 19,63 cm ≤ (3.04 in ≤ ) 

"C" G1/8 PORT 1/8-27 

_,D 40mm 48,5(1.91") 

"D" M5X0,8 #10-32 

50mm 

PULL 17,62 cm ≤ (2.73 in ≤ ) 

"E" M8X1,25 5/16-18 

75mm 

16,0(ÿ .631") X 

3,0(.12") DP 

18,0 

(.71") 

16,0(.63") 

31,5 

(1.24") 

"B" TAP THRU 

(2 PLACES) 

W 

61,0(2.40") 

SQ. 

15,75(.62") 

16,0(ÿ .630") X 

2,5(.10") DP 

15,75(.62") 

15,0 

(.59") 

12,45 

(.49") 

"A" 

+ STK. 

TYPE D 

15,0(.59") 

+ STK 

10,9(.43") 

(2 PLACES) 

8,7(.34") 

30,0 

(1.18") 

8,0 

(.32") 

16,0 

(.63") 

32,0 

(1.26") 

25,5 

(1.00") 

12,75(.50") 

"E" TAP THRU 

(2 PLACES) 

Z 

Y 

X 

12,75(.50") 

31,5 

(1.24") 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) 

"D" TAP X 7,1(.28") DP 

(4 PLACES) 

25,5(1.00") 

LC 50 

x 




LIMIT SENSORS 


72 

















LC 63mm (2-1/2") Bore 


MODEL 

LC 

TYPE 

_,D 


15mm 

25mm 

40mm 

"A" 

57,0(2.25") 

PISTON AREA 

PUSH 31,17 cm ≤ (4.83 in ≤ ) 

50mm 

PULL 28,03 cm ≤ (4.34 in ≤ ) 

75mm 

"B" 

"C" 

"D" 


M8X1,25 5/16-18 

G1/8 PORT 1/8-27 

M10X1,5 3/8-24 

38,0 

(1.50") 

W 

74,0(2.91") 

SQ. 

19,0(.75") 

22,0(ÿ .866") X 

2,5(.10") DP 

19,0(.75") 

15,0 

(.59") 

12,45 

(.49") 

"A" 

+ STK. 

TYPE D 

15,0(.59") 

+ STK 

12,7(.50") 

(2 PLACES) 

22,0(.87") 

6,0 

(.24") 

60,0 

(2.36") 

76,0(2.99") 

SQ. 

8,0 

(.32") 

8,0 

(.32") 

31,5(1.24") 

Z 

X 

38,0(1.50") 

60,0 

(2.36") 

15,75(.62") 

"B" TAP THRU 

(4 PLACES) 

Y 

15,75(.62") 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) 

"D" TAP X 23,9(.94") DP 

(2 PLACES) 

31,5(1.24") 


MODEL 

LC 


15mm 

"B" M8X1,25 5/16-18 

25mm 

PUSH 31,17 cm ≤ (4.83 in ≤ ) 

"C" G1/8 PORT 1/8-27 

_,D 40mm 57,0(2.25") 

"D" M5X0,8 #10-32 

50mm 

PULL 28,03 cm ≤ (4.34 in ≤ ) 

75mm 

"A" 

+ STK. 

20,0(ÿ .788") X 

3,0(.12") DP 

25,0 

(.98") 

20,0(.79") 

38,0 

(1.50") 

W 

74,0(2.91") 

SQ. 

19,0(.75") 

22,0(ÿ .866") X 

2,5(.10") DP 

19,0(.75") 

15,0 

(.59") 

12,45 

(.49") 

TYPE D 

15,0(.59") 

+ STK 

12,7(.50") 

(2 PLACES) 

22,0(.87") 

38,0 

(1.50") 

40,0 

(1.57") 

31,5 

(1.24") 

Z 

X 

38,0 

(1.50") 

12,5 

(.49") 

25,0 

(.98") 

15,75(.62") 

"B" TAP THRU 

(4 PLACES) 

Y 

15,75(.62") 

SENSOR TRACK 

(2 PLACES, 

90∞APART) 

"C" PORT 

(2 PLACES) 

"D" TAP X 8,6(.34") DP 

(4 PLACES) 

31,5(1.24") 

LC 63 

x 




LIMIT SENSORS 


















73

High strength 

threaded connection 

Low friction cup sealintegral 

rod wiper 

Double wound 302 

SS retaining wire 

60,000 PSI tensile 

strength electro-less 

nickel rod bearing 

Low friction figure 8 

piston seal 

Magnetic 

piston, available 

Hard chrome plated 100,000 

PSI yield strength rod 

Zinc plated dust cover 

Machined bore anodized 

aluminum housing 

SC series Stopper Cylinders 

SC SERIES 


Nason’s SC series stopper cylinders were 

designed for today’s demanding conveyor 

systems. With more power in a smaller package, 

the SC series stopper cylinder is offered in seven 

different mounting styles with three different 

rod end configurations to fit into almost any 

design situation. 

Compact Size 

Nason’s SC series cylinders were designed 

with todays conveyor systems in mind. Five 

bore sizes with a variety of strokes and rod end 

options ensure a perfect fit for each application. 

Nason is able to fit a larger bore size into 

the same package as comparable 

competitive products. 


The SC series incorporates 60,000 PSI tensile 

strength bearings with an oversized 100,000 

PSI yield strength rod for maximum 

stopping power. 


The SC series stopper cylinders are metric in 

design (bore & rod size). They are offered in inch 

or metric mounting and porting. Five different 

threaded mounting options and two different 

flange mounting options ensure an exact fit 

into today’s tight space requirements. Due to 

their 100% machined design they are easily 

customized by Nason. 

Rebuildable 

All SC series cylinders are field rebuidable.

How to Order 

How to Order 

Example: 

Part Number:SC-32X15WFS-EMHS 

x 

SC 32 15 W FS EM HS 

MODEL BORE STROKE MOUNTING 

OPTIONS 

ROD STYLE MAGNETIC 

MODEL 

SC - Stopper Cylinder 

BORE 

20 - 20mm (.79") 

25 - 25mm (.98") 

32 - 32mm (1.26") 

40 - 40mm (1.58") 

50 - 50mm (1.97") 

MOUNTING 




MT - Drilled Through and Counterbored for Bolt Clearance 



FS - Flange on Side of Cylinder Body 

STROKE 

20mm Bore 

25mm Bore 

32mm Bore 

40mm Bore 

50mm Bore 

10 - 10mm Stroke 














MAGNETIC 

BLANK (No Code) - Standard "NO MAGNET" Piston 


OPTIONS 


HS - High Temperature Seals -10∞C to 150∞C 

(0∞F to 302∞F) 


ROD STYLE 

BLANK (No Code) - Round Rod 

F - Flat Rod 

W - Flat Rod with Roller 

75



Maximum Operating Pressure: 

Operating Temperature: 

Packing: 

Lubrication: 

Stroke Tolerance: 


17 Bar (250 PSI) 

-10∞C to 95∞C (0∞F to 200∞F) 

Buna N 


+1,0mm/-0mm (+0.04"/-0") 

Unit Weights 

kg (lbs) 

BORE 

20 

25 

32 

40 

50 

STROKE 

10 15 20 25 30 

0.15 0.16 

(.34) (.36) 

0.21 0.23 0.24 

(.47) 

0.43 

(.50) 

0.45 

(.53) 

0.48 

(.94) (1.0) (1.06) 

0.74 0.79 0.83 

(1.67) 

1.10 

(1.75) 

1.15 

(1.83) 

1.19 

(2.43) (2.53) (2.63) 

Operating Ranges 

Minimum Operating Pressure for Load 

10 (145) 

Weight - kilograms (pounds) 

55 (121) 

45 (99) 

30 (66) 

25 (55) 

20 (44) 

15 (33) 

10 (22) 

5 (11) 

4 (8.8) 

3 (6.6) 

SC-50 

SC-40 

SC-32 

SC-25 

SC-20 

Pressure - Bar (PSI) 

9 (130.5) 

8 (116) 

7 (101.5) 

6 (87) 

5 (72.5) 

4 (58) 

3 (43.5) 

SC-20 

SC-25 

SC-32 

SC-40 

SC-50 

2 (4.4) 

2 (29) 

1 (14.5) 

1 (2.2) 

1 5 10 15 20 

(3.3) (16.5) (33) (49.5) (66) 

Speed - meters/minute 

(feet/minute) 

0 

10 (22) 20 (44) 30 (66) 40 (88) 50 (110) 60 (132) 70 (154) 80 (176) 

Lateral load - kilograms (pounds) 

76

SC 20mm (3/4") Bore 

Non Magnetic 


MODEL 

SC 


10mm 

15mm 

"A" 

38,0 (1.50") 

PISTON AREA 

2 2 

PUSH 3,14 cm (0.48 in ) 

2 2 

PULL 2,32 cm (0.36 in ) 

"B" 

"C" 


M5X0,8 #10-32 

M5X0,8 #10-32 

30,0 SQ. 

(1.181") 

18,0 

(.71") 

"A" 

+ STROKE 

4,5 

(.18") 

21,0 

(.83") 

21,0 

(.83") 

6,9 

(.27") 

5,6 

(.22") 

4,5 

(.18") 

W 


W 

21,0 

(.83") 

Z 

X 

ÿ 20,0 

(.79") 

X 

Z 

Y 

10,0 (ÿ .394) ROD 

(ROD FLUSH WITH FACE) 

"C" TAP X 11 (.44") DP 

(2 PLACES) 

"B" PORT 

(2 PLACES) 


W 

Z 

X 

Y 

Y 

Non Magnetic 


MODEL 

SC 


10mm 

15mm 

"A" 

38,0 (1.50") 

PISTON AREA 

2 2 

PUSH 3,14 cm (0.48 in ) 

2 2 

PULL 2,32 cm (0.36 in ) 

"B" 


M5X0,8 #10-32 

4,5 

(.18") 

30,0 SQ. 

(1.181") 

21,0 

(.83") 

18,0 

(.71") 

21,0 

(.83") 

"A" 

+ STROKE 

6,9 

(.27") 

4,5 

(.18") 

W 

5,6 

(.22") 

21,0 

(.83") 

Z 

X 

ÿ 20,0 

(.79") 

10,0 (ÿ .394) ROD 


Y 

4,2 (ÿ .165") DRILL THRU 

7,6 (ÿ .30") C'BORE X 4,5 (.18") DP 

(2 PLACES, OPPOSITE FACE) 

"B" PORT 

(2 PLACES) 

SC 20 

x 

MODEL BORE STROKE ROD STYLE MOUNTING OPTIONS 

10 - 10mm STROKE 


BLANK (NO CODE) - ROUND ROD (SHOWN) 

F - FLAT ROD (SEE PAGE 92) 

W - FLAT ROD WITH ROLLER (SEE PAGE 92) 

EM - INCH THREADS & PORTS 

HS - HIGH TEMP SEALS (SEE PAGE 62) 

UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) 





FR - FLANGE ON REAR FACE (SEE PAGE 93) 

77


Magnetic 


MODEL 

SC 


PISTON AREA 

2 2 

10mm 

PUSH 3,14 cm (0.48 in ) 

38,0 (1.50") 

2 2 

15mm 

PULL 2,32 cm (0.36 in ) 

"B" 

"C" 


M5X0,8 #10-32 

M5X0,8 #10-32 

30,0 SQ. 

(1.181") 

18,0 

(.71") 

"A" 

+ STROKE 

4,5 

(.18") 

21,0 

(.83") 

SENSOR SLOT 

(2 PLACES, 

180∞APART) 

21,0 

(.83") 

6,9 

(.27") 

5,6 

(.22") 

4,5 

(.18") 

W 


W 

21,0 

(.83") 

Z 

Y 

X 

10,0 (ÿ .394) ROD 


ÿ 20,0 

(.79") 

"C" TAP X 12,7 (.50") DP 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

X 


W 

Z 

X 

Y 

Z 

Y 

Magnetic 


MODEL STANDARD STROKES "A" 

PISTON AREA 

2 2 

10mm 

PUSH 3,14 cm (0.48 in ) 

SC 

38,0 (1.50") 

2 2 

15mm 

PULL 2,32 cm (0.36 in ) 

"B" 


M5X0,8 #10-32 

4,5 

(.18") 

30,0 SQ. 

(1.181") 

21,0 

(.83") 

SENSOR SLOT 

(2 PLACES, 180∞APART 

18,0 

(.71") 

21,0 

(.83") 

"A" 

+ STROKE 

6,9 

(.27") 

4,5 

(.18") 

W 

5,6 

(.22") 

21,0 

(.83") 

Z 

X 

ÿ 20,0 

(.79") 

10,0 (ÿ .394) ROD 


Y 


7,6 (ÿ .30") C'BORE X 4,5(.18") DP 


"B" PORT 

(2 PLACES) 

SC 20 

x 

MODEL BORE STROKE ROD STYLE MOUNTING MAGNETIC OPTIONS 

M 

78 








LIMIT SENSORS 









UR - URETHANE SHOCK PAD REAR 

(SEE PAGE 62)


Non Magnetic 


MODEL 

SC 


10mm 

38,0 (1.50") 

15mm 

PISTON AREA 

2 2 

PUSH 3,14 cm (0.48 in ) 

2 2 

PULL 2,32 cm (0.36 in ) 

"B" 

"C" 


M5X0,8 #10-32 

M4X0,7 #8-32 

10,0 

(.39") 

20,0 

(.79) 

30,0 SQ. 

(1.181") 

18,0 

(.71") 

21,0 

(.83") 

"A" 

+ STROKE 

6,9 

(.27") 

4,5 

(.18") 

W 

5,6 

(.22") 

21,0 

(.83") 

Z 

X 

"C" TAP X 6,1 (.24") DP. 

(4 PLACES) 

Y 

10,0 (ÿ .394) ROD 


ÿ 20,0 

(.79") 

"B" PORT 

(2 PLACES) 

Magnetic 


MODEL 

SC 


10mm 

15mm 

"A" 

38,0 (1.50") 

PISTON AREA 

2 2 

PUSH 3,14 cm (0.48 in ) 

2 2 

PULL 2,32 cm (0.36 in ) 

"B" 

"C" 


M5X0,8 #10-32 

M4X0,7 #8-32 

10,0 

(.39") 

SENSOR SLOT 

(2 PLACES, 

180∞APART) 

20,0 

(.79) 

30,0 SQ. 

(1.181") 

18,0 

(.71") 

21,0 

(.83") 

"A" 

+ STROKE 

6,9 

(.27") 

4,5 

(.18") 

W 

5,6 

(.22") 

21,0 

(.83") 

Z 

X 

"C" TAP X 6,1 (.24") DP. 

(4 PLACES) 

Y 

10,0 (ÿ .394) ROD 


ÿ 20,0 

(.79") 

"B" PORT 

(2 PLACES) 

SC 20 

x 




MS - SIDE THREADS 

FS - SIDE FLANGES 

(SEE PAGE 93) 




(SEE PAGE 62) 






LIMIT SENSORS 


BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON 

M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS 

79

SC 25mm (1.0") Bore 

Non Magnetic 


MODEL 

SC 


10mm 

15mm 

20mm 

"A" 

38,0 (1.50") 

PISTON AREA 

2 2 

PUSH 4,91 cm (0.76 in ) 

2 2 

PULL 3,81 cm (0.59 in ) 

"B" 

"C" 


M5X0,8 #10-32 

M5X0,8 #10-32 

35,0 SQ. 

(1.378") 

22,0 

(.87") 

"A" 

+ STROKE 

4,75 

(.19") 

4,75 

(.19") 

25,4 

(1.00") 

W 

20,8 

(.82") 

6,9 

(.27") 

6,1 

(.24") 


W 

25,4 

(1.00") 

Z 

X 

ÿ 24,0 

(.95") 

X 

Z 

12,0 (ÿ .472) ROD 


Y 

"C" TAP X 12,7 (.50") DP 

(2 PLACES) 

"B" PORT 

(2 PLACES) 


W 

Z 

X 

Y 

Y 

Non Magnetic 


MODEL 

SC 


10mm 

15mm 

20mm 

"A" 

38,0 (1.50") 

PISTON AREA 

2 2 

PUSH 4,91 cm (.76 in ) 

2 2 

PULL 3,81 cm (.59 in ) 

"B" 


M5X0,8 #10-32 

35,0 SQ. 

(1.378") 

22,0 

(.87") 

"A" 

+ STROKE 

4,75 

(.19") 

4,75 

(.19") 

25,4 

(1.00") 

W 

20,8 

(.82") 

6,9 

(.27") 

6,1 

(.24") 

25,4 

(1.00") 

Z 

X 

ÿ 24,0 

(.95") 

12,0 (ÿ .472) ROD 


Y 


7,6 (ÿ .30") C'BORE X 4,5 (.18") DP 


"B" PORT 

(2 PLACES) 

SC 25 

x 


80 














FR - FLANGE ON REAR FACE (SEE PAGE 93)


Magnetic 


MODEL 

SC 


10mm 

15mm 

20mm 

"A" 

38,0 (1.50") 

PISTON AREA 

2 2 

PUSH 4,91 cm (0.76 in ) 

2 2 

PULL 3,81 cm (0.59 in ) 

"B" 

"C" 


M5X0,8 #10-32 

M5X0,8 #10-32 

35,0 SQ. 

(1.378") 

22,0 

(.87") 

"A" 

+ STROKE 

4,75 

(.19") 

4,75 

(.19") 

25,4 

(1.00") 

W 

20,7 

(.82") 

6,9 

(.27") 

6,1 

(.24") 


W 

25,4 

(1.00") 

Z 

X 

ÿ 24 

(.95") 

X 

Z 

12,0 (ÿ .472) ROD 


Y 

"C" TAP X 12,7 (.50") DP 

(2 PLACES) 

SENSOR SLOT 

(2 PLACES, 180∞APART) 

"B" PORT 

(2 PLACES) 


W 

Z 

X 

Y 

Y 

Magnetic 


MODEL 

SC 


10mm 

15mm 

20mm 

"A" 

38,0 (1.50") 

PISTON AREA 

2 2 

PUSH 4,91 cm (.76 in ) 

2 2 

PULL 3,81 cm (.59 in ) 

"B" 


M5X0,8 #10-32 

35,0 SQ. 

(1.378") 

22,0 

(.87") 

"A" 

+ STROKE 

4,75 

(.19") 

4,75 

(.19") 

25,4 

(1.00") 

W 

SENSOR SLOT 


20,7 

(.82") 

6,9 

(.27") 

6,1 

(.24") 

25,4 

(1.00") 

Z 

X 

ÿ 24,0 

(.95") 

12,0 (ÿ .472) ROD 


Y 


7,6 (ÿ .30") C'BORE X 4,5(.18") DP 


"B" PORT 

(2 PLACES) 

SC 25 

x 


M 









LIMIT SENSORS 










(SEE PAGE 62) 

81


Non Magnetic 


MODEL 

SC 

10,0 

(.39") 


10mm 

15mm 

20mm 

"A" 

38,0 (1.50") 

PISTON AREA 

2 2 

PUSH 4,91 cm (0.76 in ) 

2 2 

PULL 3,81 cm (0.59 in ) 

20,0 

(.79") 

35,0 SQ. 

(1.378") 

22,0 

(.87") 

"B" 

"C" 


M5X0,8 #10-32 

M5X0,8 #10-32 

20,8 

(.82") 

"A" 

+ STROKE 

6,9 

(.27") 

4,75 

(.19") 

W 

6,1 

(.24") 

25,4 

(1.00") 

Z 

X 

"C" TAP X 7,6 (.30") DP 

(4 PLACES) 

ÿ 24,0 (.95") 

Y 

12,0 (ÿ .472) ROD 


"B" PORT 

(2 PLACES) 

Magnetic 


MODEL 

SC 

10,0 

(.39") 


10mm 

15mm 

20mm 

"A" 

38,0 (1.50") 

PISTON AREA 

2 2 

PUSH 4,91 cm (0.76 in ) 

2 2 

PULL 3,81 cm (0.59 in ) 

20,0 

(.79") 

35,0 SQ. 

(1.378") 

22,0 

(.87") 

"B" 

"C" 


M5X0,8 #10-32 

M5X0,8 #10-32 

20,8 

(.82") 

"A" 

+ STROKE 

6,9 

(.27") 

4,75 

(.19") 

W 

6,1 

(.24") 

25,5 

(1.00") 

Z 

X 

"C" TAP X 7,6 (.30") DP 

(4 PLACES) 

Y 

ÿ 24,0(.95") 

SENSOR SLOT 


12,0 (ÿ .472) ROD 


"B" PORT 

(2 PLACES) 

SC 25 

x 







(SEE PAGE 93) 




(SEE PAGE 62) 

82 






LIMIT SENSORS 



M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS

SC 32mm (1-1/4") Bore 

Non Magnetic 


MODEL 

SC 


10mm 

15mm 

20mm 


2 2 

PUSH 8,04 cm (1.25 in ) 

"B" G 1/8 PORT 1/8-27 

44,0 (1.73") 

2 2 

"C" M6X1,0 1/4-20 

PULL 4,91 cm (0.76 in ) 

5,3 

(.21") 

5,3 

(.21") 

42,0 SQ. 

(1.654") 

31,5 

(1.24") 

W 

4,4 

(.17") 

20,0 

(.79") 

25,1 

(.99") 

"A" 

+ STROKE 

8,4 

(.33") 

7,1 

(.28") 


W 

31,5 

(1.24") 

Z 

X 

ÿ 36,0 

(1.42") 

X 

Z 

20,0 (ÿ .787) ROD 


Y 

"C" TAP X 16,0 (.63") DP 

(2 PLACES) 

"B" PORT 

(2 PLACES) 


W 

Y 

Z 

X 

Y 

Non Magnetic 


MODEL 

SC 


10mm 

15mm 

20mm 

"A" 

44,0 (1.73") 

PISTON AREA 

2 2 

PUSH 8,04 cm (1.25 in ) 

2 2 

PULL 4,91 cm (0.76 in ) 

"B" 


G 1/8 PORT 1/8-27 

5,3 

(.21") 

5,3 

(.21") 

42,0 SQ. 

(1.654") 

31,5 

(1.24") 

W 

4,4 

(.17") 

20,0 

(.79") 

25,1 

(.99") 

"A" 

+ STROKE 

8,4 

(.33") 

7,1 

(.28") 

31,5 

(1.24") 

Z 

X 

ÿ 36,0 

(1.42") 

Y 

20,0 (ÿ .787) ROD 



8,6 (ÿ .34") C'BORE X 5,6 (.22") DP 


"B" PORT 

(2 PLACES) 

SC 32 

x 
















83

SC 32mm (1-1/4") Bore 

Magnetic 


MODEL 

SC 


10mm 

15mm 

20mm 


2 2 

"B" G 1/8 PORT 1/8-27 

PUSH 8,04 cm (1.25 in ) 

44,0 (1.73") 

2 2 

"C" M6X1,0 1/4-20 

PULL 4,91 cm (0.76 in ) 

5,3 

(.21") 

5,3 

(.21") 

42,0 SQ. 

(1.654") 

31,5 

(1.24") 

W 

4,4 

(.17") 

20,0 

(.79") 

25,1 

(.99") 

"A" 

+ STROKE 

8,4 

(.33") 

7,1 

(.28") 


W 

31,5 

(1.24") 

Z 

X 

ÿ 36,0 

(1.42") 

X 

Z 

20,0 (ÿ .787) ROD 


Y 

"C" TAP X 16,0 (.63") DP 

(2 PLACES) 

"B" PORT 

(2 PLACES) 


W 

Y 

SENSOR SLOT 

(2 PLACES. 180∞APART) 

Z 

X 

Y 

Magnetic 


MODEL 

SC 


10mm 

15mm 

20mm 

"A" 

44,0 (1.73) 

PISTON AREA 

2 2 

PUSH 8,04 cm (1.25 in ) 

2 2 

PULL 4,91 cm (0.76 in ) 

"B" 


G 1/8 PORT 1/8-27 

5,3 

(.21") 

5,3 

(.21") 

42,0 (1.654") 

SQ. 

31,5 

(1.24") 

W 

4,4 

(.17") 

SENSOR SLOT 

(2 PLACES. 

180∞APART) 

20,0 

(.79") 

25,1 

(.99") 

"A" 

+ STROKE 

8,4 

(.33") 

7,1 

(.28") 

31,5 

(1.24") 

Z 

X 

ÿ 36,0 

(1.42") 

Y 

20,0 (ÿ .787) ROD 



8,6 (ÿ .34") C'BORE X 5,6 (.22") DP 


"B" PORT 

(2 PLACES) 

SC 32 

x 


M 

84 









LIMIT SENSORS 










(SEE PAGE 62)

SC 32mm (1-1/4") Bore 

Non Magnetic 


MODEL 

SC 


10mm 

15mm 

20mm 

"A" 

44,0 (1.73") 

PISTON AREA 

2 2 

PUSH 8,04 cm (1.25 in ) 

2 2 

PULL 4,91 cm (0.76 in ) 

"B" 

"C" 


G 1/8 PORT 1/8-27 

M5X0,8 #10-32 

20,0 

(.79") 

"A" 

+ STROKE 

12,0 

(.47") 

15,5 

(.61") 

5,3 

(.21") 

42,0 SQ. 

(1.654") 

W 

4,4 

(.17") 

25,1 

(.99") 

8,4 

(.33") 

7,1 

(.28") 

31,5 

(1.24") 

Z 

X 

ÿ 36,0 

(1.42") 

"C" TAP X 8,0 (.32") DP 

(4 PLACES) 

Y 

20,0 (ÿ .787) ROD 


"B" PORT 

(2 PLACES) 

Magnetic 


MODEL 

SC 


10mm 

15mm 

20mm 

"A" 

44,0 (1.73") 

PISTON AREA 

2 2 

PUSH 8,04 cm (1.25 in ) 

2 2 

PULL 4,91 cm (0.76 in ) 

20,0 

(.79") 

"B" 

"C" 


G 1/8 PORT 1/8-27 

M5X0,8 #10-32 

"A" 

+ STROKE 

12,0 

(.47") 

15,5 

(.61") 

5,3 

(.21") 

42,0 SQ. 

(1.654") 

W 

4,4 

(.17") 

25,1 

(.99") 

8,4 

(.33") 

7,1 

(.28") 

31,5 

(1.24") 

Z 

X 

ÿ 36,0 

(1.42") 

SC 

"C" TAP X 8,0 (.32") DP 

(4 PLACES) 

32 

x 

Y 

20,0 (ÿ .787) ROD 


SENSOR SLOT 



"B" PORT 

(2 PLACES) 






(SEE PAGE 93) 




(SEE PAGE 62) 






LIMIT SENSORS 




85

SC 40mm (1-1/2") Bore 

Non Magnetic 


MODEL 

SC 


PISTON AREA 

20mm 

2 2 

PUSH 12,56 cm (1.95 in ) 

25mm 47,0 (1.85") 

2 2 

30mm PULL 9,42 cm (1.46 in ) 

"B" 

"C" 


G 1/8 PORT 1/8-27 

M6X1,0 1/4-20 

6,0 

(.24") 

6,0 

(.24") 

50,0 SQ. 

(1.968") 

38,0 

(1.50") 

W 

3,6 

(.14") 

28,0 

(1.10") 

26,4 

(1.04") 

"A" 

+ STROKE 

9,9 

(.39") 

8,7 

(.34") 


W 

38,0 

(1.50") 

Z 

X 

Ø44,0 

(1.73") 

X 

Z 

Y 

25.0(Ø.984") ROD 


Y 

"C" TAP X 15,2(.60") DP 

(2 PLACES) "B" PORT 

(2 PLACES) 


W 

Z 

X 

Y 

Non Magnetic 


MODEL 

SC 


20mm 

25mm 

30mm 

"A" 

47,0 (1.85") 

PISTON AREA 

2 2 

PUSH 12,56 cm (1.95 in ) 

2 2 

PULL 9,42 cm (1.46 in ) 

"B" 


G 1/8 PORT 1/8-27 

6,0 

(.24") 

6,0 

(.24") 

50,0 SQ. 

(1.968") 

38,0 

(1.50") 

W 

3,6 

(.14") 

28,0 

(1.10") 

26,4 

(1.04") 

"A" 

+ STROKE 

9,9 

(.39") 

8,7 

(.34") 

38,0 

(1.50") 

Z 

X 

Ø44,0 

(1.73") 

25.0 (Ø.984") ROD 


Y 

5,2 (Ø.204") DRILL THRU 

8,6 (Ø.34") C'BORE X 5,6(.22") DP 


"B" PORT 

(2 PLACES) 

SC 40 

x 


86 














FR - FLANGE ON REAR FACE (SEE PAGE 93)

SC 40mm (1-1/2") Bore 

Magnetic 


MODEL 

SC 


20mm 

25mm 

30mm 

"A" 

47,0 (1.85") 

PISTON AREA 

2 2 

PUSH 12,56 cm (1.95 in ) 

2 2 

PULL 9,42 cm (1.46 in ) 

"B" 

"C" 


G 1/8 PORT 1/8-27 

M6X1,0 1/4-20 

6,0 

(.24") 

6,0 

(.24") 

50,0 SQ. 

(1.968") 

38,1 

(1.50") 

W 

3,6 

(.14") 

28,0 

(1.10") 

26,4 

(1.04") 

"A" 

+ STROKE 

9,9 

(.39") 

8,7 

(.34") 


W 

38,0 

(1.50") 

Z 

X 

Ø44,0 

(1.73") 

X 

Z 

Y 

25.0 (Ø.984") ROD 


Y 

"C" TAP X 15,2 (.60") DP 

(2 PLACES) 

SENSOR SLOT 

(2 PLACES. 180° APART) 

"B" PORT 

(2 PLACES) 


W 

Z 

X 

Y 

Magnetic 


MODEL 

SC 


20mm 

25mm 47,0 (1.85") 

30mm 

6,0 

(.24") 

6,0 

(.24") 

50,0 SQ. 

(1.968") 

38,0 

(1.50") 

W 

PISTON AREA 

2 2 

PUSH 12,56 cm (1.95 in ) 

2 2 

PULL 9,42 cm (1.46 in ) 

3,6 

(.14") 

SENSOR SLOT 


28,0 

(1.10") 

"B" 


G 1/8 PORT 1/8-27 

26,4 

(1.04") 

"A" 

+ STROKE 

9,9 

(.39") 

8,7 

(.34") 

38,0 

(1.50") 

Z 

X 

Ø44,0 

(1.73") 

25.0 (Ø.984") ROD 


Y 

5,2 (Ø.204") DRILL THRU 

8,6 (Ø.34") C'BORE X 5,6 (.22") DP 


"B" PORT 

(2 PLACES) 

SC 40 

x 


M 









LIMIT SENSORS 










(SEE PAGE 62) 

87

SC 40mm (1-1/2") Bore 

Non Magnetic 


MODEL 

SC 


20mm 

25mm 

30mm 

"A" 

47,0 (1.85") 

PISTON AREA 

2 2 

PUSH 12,56 cm (1.95 in ) 

2 2 

PULL 9,42 cm (1.46 in ) 


"B" G 1/8 PORT 1/8-27 

"C" M6X1,0 1/4-20 

12,0 

(.47") 

25,0 

(.98") 

6,0 

(.24") 

50,0 SQ. 

(1.968") 

W 

3,6 

(.14") 

28,0 

(1.10") 

26,4 

(1.04") 

"A" 

+ STROKE 

9,9 

(.39") 

8,7 

(.34") 

38,0 

(1.50") 

Z 

X 

Ø44,0 

(1.73") 

"C" TAP X 9,7 (.38") DP 

(4 PLACES) 

Y 

25.0 (Ø.984") ROD 


"B" PORT 

(2 PLACES) 

Magnetic 


MODEL 

SC 


20mm 

25mm 

30mm 

"A" 

47,0 (1.85") 

PISTON AREA 

2 2 

PUSH 12,56 cm (1.95 in ) 

2 2 

PULL 9,42 cm (1.46 in ) 


"B" G 1/8 PORT 1/8-27 

"C" M6X1,0 1/4-20 

28,0 

(1.10") 

"A" 

+ STROKE 

12,0 

(.47") 

25,0 

(.98") 

6,0 

(.24") 

50,0 SQ. 

(1.968") 

W 

3,6 

(.14") 

26,4 

(1.04") 

9,9 

(.39") 

8,7 

(.34") 

38,0 

(1.50") 

Z 

X 

Ø44,0 

(1.73") 

"C" TAP X 9,7 (.38") DP 

(4 PLACES) 

Y 

25.0 (Ø.984") ROD 


SENSOR SLOT 


"B" PORT 

(2 PLACES) 

SC 40 

x 







(SEE PAGE 93) 




(SEE PAGE 62) 

88 






LIMIT SENSORS 



M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS


Non Magnetic 


MODEL 

SC 


20mm 

25mm 

30mm 

"A" 

49,5 (1.95") 

PISTON AREA 

2 2 

PUSH 19,63 cm (3.04 in ) 

2 2 

PULL 14,72 cm (2.28 in ) 


"B" G 1/8 PORT 1/8-27 

"C" M8X1,25 5/16-18 

6,5 

(.26") 

6,5 

(.26") 

63,0 (2.48") 

SQ. 

50,0 

(1.97") 

W 

28,0 

(1.10") 

26,9 

(1.06") 

"A" 

+ STROKE 

10,9 

(.43") 

8,7 

(.34") 


W 

X 

Z 

50,0 

(1.97") 

Z 

X 

ÿ 56,0 

(2.21") 

Y 


25,0 (ÿ .984) ROD 


Y 

"C" TAP X 20,3 (.80") DP 

(2 PLACES) 

"B" PORT 

(2 PLACES) 

Z 

W 

X 

Y 

Non Magnetic 


MODEL 

SC 


20mm 

25mm 

30mm 

"A" 

49,5 (1.95") 

PISTON AREA 

2 2 

PUSH 19,63 cm (3.04 in ) 

2 2 

PULL 14,72 cm (2.28 in ) 

"B" 


G 1/8 PORT 1/8-27 

6,5 

(.26") 

63,0 (2.48") 

SQ. 

50,0 

(1.97") 

28,0 

(1.10") 

26,9 

(1.06") 

"A" 

+ STROKE 

10,9 

(.43") 

6,5 

(.26") 

W 

8,7 

(.34") 

50,0 

(1.97") 

Z 

X 

ÿ 56,0 

(2.21") 

25,0 (ÿ .984) ROD 


Y 


10,4 (ÿ .41") C'BORE X 6,9 (.27") DP 


"B" PORT 

(2 PLACES) 

SC 50 

x 
















89


Magnetic 


MODEL 

SC 


20mm 

25mm 

30mm 

"A" 

49,5 (1.95") 

PISTON AREA 

2 2 

PUSH 19,63 cm (3.04 in ) 

2 2 

PULL 14,72 cm (2.28 in ) 


"B" G 1/8 PORT 1/8-27 

"C" M8X1,25 5/16-18 

63,0 SQ. 

(2.48") 

28,0 

(1.10") 

"A" 

+ STROKE 

6,5 

(.26") 

6,5 

(.26") 

50,0 

(1.97") 

W 

26,9 

(1.06") 

10,9 

(.43") 

8,7 

(.34") 


W 

50,0 

(1.97") 

Z 

X 

ÿ 56,0 

(2.21") 

X 

Z 

Y 

25,0 (ÿ .984) ROD 


Y 

"C" TAP X 20,3(.80") DP 

(2 PLACES) 

SENSOR SLOT 


"B" PORT 

(2 PLACES) 


W 

Z 

X 

Y 

Magnetic 


MODEL 

SC 


20mm 

25mm 

30mm 

"A" 

49,5 (1.95") 

PISTON AREA 

2 2 

PUSH 19,63 cm (3.04 in ) 

2 2 

PULL 14,72 cm (2.28 in ) 


"B" G 1/8 PORT 1/8-27 

63,0 SQ. 

(2.48") 

28,0 

(1.10") 

"A" 

+ STROKE 

6,5 

(.26") 

6,5 

(.26") 

50,0 

(1.97") 

W 

SENSOR SLOT 


26,9 

(1.06") 

10,9 

(.43") 

8,7 

(.34") 

50,0 

(1.97") 

Z 

X 

ÿ 56,0 

(2.21") 

25,0 (ÿ .984) ROD 


Y 


10,4 (ÿ .41") C'BORE X 6,9 (.27") DP 


"B" PORT 

(2 PLACES) 

SC 50 

x 


M 

90 









LIMIT SENSORS 










(SEE PAGE 62)


Non Magnetic 


MODEL 

SC 


20mm 

25mm 

30mm 

"A" 

49,5 (1.95") 

PISTON AREA 

2 2 

PUSH 19,63 cm (3.04 in ) 

2 2 

PULL 14,72 cm (2.28 in ) 


"B" G 1/8 PORT 1/8-27 

"C" M8X1,25 5/16-18 

12,0 

(.47") 

25,0 

(.98") 

6,5 

(.26") 

63,0 SQ. 

(2.48") 

W 

28,0 

(1.10") 

26,9 

(1.06") 

"A" 

+ STROKE 

10,9 

(.43") 

8,7 

(.34") 

50,0 

(1.97") 

Z 

X 

ÿ 56,0 

(2.21") 

"C" TAP X 12,0 (.47") DP 

(4 PLACES) 

Y 

25,0 (ÿ .984) ROD 


"B" PORT 

(2 PLACES) 

Magnetic 


MODEL 

SC 


20mm 

25mm 

30mm 

"A" 

49,5 (1.95") 

PISTON AREA 

2 2 

PUSH 19,63 cm (3.04 in ) 

2 2 

PULL 14,72 cm (2.28 in ) 


"B" G 1/8 PORT 1/8-27 

"C" M8X1,25 5/16-18 

12,0 

(.47") 

25,0 

(.98") 

6,5 

(.26") 

63,0 SQ. 

(2.48") 

W 

28,0 

(1.10") 

26,9 

(1.06") 

"A" 

+ STROKE 

10,9 

(.43") 

8,7 

(.34") 

50,0 

(1.97") 

Z 

X 

ÿ 56,0 

(2.21") 

SC 

"C" TAP X 12,0 (.47") DP 

(4 PLACES) 

50 

x 

Y 

25,0 (ÿ .984) ROD 


SENSOR SLOT 



"B" PORT 

(2 PLACES) 






(SEE PAGE 93) 




(SEE PAGE 62) 






LIMIT SENSORS 




91

Rod End Styles 

Round Rod - Rod Code Blank (No Code) 

STROKE 

(RETRACTS FLUSH) 

SHOWN EXTENDED 

W 

Z 

X 

Y 

"A" DIA. 

(SHOWN EXTENDED) 

Flat Rod - Rod Code"F" 

W 

Z 

X 

"B" 

WORKPIECE TRANSFER DIRECTION 

STROKE 

(RETRACTS FLUSH) 

SHOWN EXTENDED 

Y 

"A" DIA. 

(SHOWN EXTENDED) 

Standard orientation for flat is side "W". Flat can be reoriented to any position. 

Flat Rod With Roller - Rod Code - "W" 

SHOWN RETRACTED 

Z 

W 

"C" 

X 

"B" 

WORKPIECE TRANSFER DIRECTION 

"E" 

Y 

"A" DIA. 

"F" DIA. 

Standard orientation for flat is side "W". Flat can be reoriented to any position. 

Bore "A" "B" "C" "D" "E" 

"F" 

20 

25 

32 

40 

50 

10,0(0.394") 8,0(0.315") 

12,0(0.472") 10,0(0.394") 

20,0(0.787") 18,0(0.709") 

25,0(0.984") 22,5(0.886") 

25,0(0.984") 22,5(0.886") 

3,5 (.14") 

4,0(.16") 

8,0 (.32") 

9,0 (.35") 

9,0 (.35") 

6,35(0.25") 8,5 (0.33") 8,0 (0.32") 

8,6(0.34") 

17,0(0.67") 

20,6(0.81") 

20,6(0.81") 

11,0 (.43") 

19,0 (.75") 

25,0 (.98") 

25,0 (.98") 

10,0 (0.39") 

18,0 (0.71") 

24,0 (0.95") 

24,0 (0.95") 

92 

- Rod shown extended on Round Rod and Flat Rod Styles 

- Roller material: Plastic

Rear Face Flange Mount 

Rear Face Flange Mount - "FR" 

"C" 

"G" 

"H" 

FLANGE CAN BE 

ROTATED 90∞ 

"B" 

SEE INDIVIDUAL PRODUCT 

PAGE FOR CYLINDER DIMENSIONS 

"D" 

"A" 

"F" 

"E" 

(2 PLACES) 


Bore 

20 

25 

32 

40 

50 

"A" "B" "C" "D" "E" "F" "G" "H" 

5,4 (.21") 40,0 (1.58") 

31,8 (1.25") 15,9 (.63") 

50,8 (2.0") 9,5 (.38") 

4,5 (.18") 25,4 (1.0") 

3,9 (.15") 43,0 (1.69") 

38,1 (1.50") 19,05 (.75") 

63,5 (2.5") 

5,75 (.23") 52,0 (2.05") 

31,8 (1.25") 44,5 (1.75") 22,25 (.88") 

9,5 (.38") 

5,5 (.22") 

76,2 (3.0") 

8,1 (.32") 60,0 (2.36") 

38,1 (1.50") 50,8 (2.00") 25,4 (1.00") 

93,0 (3.66") 12,7 (.50") 7,5 (.30") 78,0 (3.07") 8,5 (.33") 46,5 (1.83") 63,5 (2.50") 31,8 (1.25") 

Side Flange Mount - "FS" 

"F" 

"F" 

"B" 

SEE INDIVIDUAL PRODUCT 

PAGE FOR CYLINDER DIMENSIONS 

"G" 

"G" 

"A" 

"D" 

"J" 

"H" 

"E" 

(4 PLACES) 

"C" 


Bore "A" "B" 

20 

25 

50,8 (2.00") 9,5 (.38") 

"C" 

5,4 (.21") 

"D" 

40 (1.58") 

3,9 (.15") 43 (1.69") 

32 63,5 (2.50") 5,75 (.23") 52 (2.05") 

9,5 (.38") 

40 76,2 (3.00") 8,1 (.32") 60 (2.36") 

"E" 

4,5 (.18") 

5,5 (.22") 

50 93 (3.66") 12,7 (.50") 7,5 (.30") 78 (3.07") 8,5 (.33") 

"F" "G" 

19 (.75") 9,5 (.38") 

25,4 (1.00") 12,7 (.50") 

"H" 

19.5 (.77") 

16,25 (.64") 

25,75 (1.01") 

"J" 

25,4 (1.0") 

31,8 (1.25") 

38,1 (1.50") 

46,5 (1.83") 

93

Hard chrome 

plated steel rod 

Figure 8 hydraulic 

piston seal 

Fabric reinforced 

phenol resin 

wear strip 

Long bronze 

rod bearing 

Rod wiper 

Machined bore anodized 

aluminum housing 

Bolt-on anodized 

aluminum heads 

L15 SERIES 1500PSI HYDRAULIC CYLINDERS 


Nason’s L15 series hydraulic actuators were 

designed to be compact, low friction, long 

lasting devices for today’s demanding design 

requirements. They are offered in single and 

double rod configurations with inch or metric 

mounting and ports. 


The L15 series incorporates thick walled, 

anodized aluminum housings and caps. Rods 

are chrome plated 1045/1050 steel riding in selflubricating 

bronze bearings. Hardened fasteners 

are used for assembly. Steel pistons with wear 

rings and rod wipers are standard on all models. 

L 15 SERIES 

Low Breakaway and Running 

Friction / Long Life 

Designed for low start up and running friction, 

the L15 series contains low friction Nitrile seals 

and are lubricated at the factory with PTFE 

impregnated grease. Precision machined 

components and self-lubricating bearings ensure 

long life and continued low friction operation. 

Compact Size 

Nason L15 cylinders were designed with today’s 

automation equipment in mind. They offer more 

power in a smaller package than comparable 

1500 PSI hydraulic cylinders. 


The L15 series cylinders are metric in design 

(bore and rod sizes). They are offered in inch 

or metric mounting and porting. Due to their 

100% machined design, they are easily 

customized by Nason. 

Rebuildable 

All L15 series cylinders are field rebuildable.

How to Order 

How to Order 

Example: 

Part Number: L15-32X25MS-EMRVRS 

x 

L15 32 25 MS EM RV RS 

MODEL BORE STROKE 

MOUNTING 

MAGNETIC 

OPTIONS 

TYPE 

MODEL 

L15 - 1500 PSI Hydraulic Cylinder 

MOUNTING 





BORE 

20 - 20mm (.79") 

25 - 25mm (.98") 

32 - 32mm (1.26") 

40 - 40mm (1.58") 

MAGNETIC 

BLANK (No Code) - Standard No Magnet 


50 - 50mm (1.97") 

STROKE 

15 - 15mm (.59") 

25 - 25mm (.98") 

40 - 40mm (1.58") 

50 - 50mm (1.97") 

65 - 65mm (2.56") 

75 - 75mm (2.95") 

OPTIONS 



RS - Male Stud for Rod End (Length - 2 x Thread Diameter) 

RF - 5mm (.197") Rod Extension 

RT - 10mm (.394") Rod Extension 

RV - 25mm (.984") Rod Extension 

TYPE 

BLANK (No Code) - Double Acting, Single Rod 


95



Mineral oil, water polyglycal 

solutions, water-in-oil 

emulsions 


Operating Temperature: 

Packing: 

Lubrication: 

Stroke Tolerance: 

-10˚C to 70˚C (0˚F to 158˚F) 

Buna N 


+0,75mm/-0mm 

(+0.03"/-0") 


Bore Push Pull 

(Rod Extend) (Rod Retract) 

20 3,14 cm 2 (.48 in 2 ) 2,64 cm 2 (.40 in 2 ) 

25 4,91 cm 2 (.76 in 2 ) 4,12 cm 2 (.64 in 2 ) 

32 8,04 cm 2 (1.25 in 2 ) 6,91 cm 2 (1.07 in 2 ) 

40 12,56 cm 2 (1.95 in 2 ) 10,55 cm 2 (1.64 in 2 ) 

50 19,63 cm 2 (3.04 in 2 ) 16,49 cm 2 (2.56 in 2 ) 









96

L15 20mm (3/4") Bore 

Non Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 3,14 cm (0.48 in ) 

47,0 (1.85") 

50mm 

2 2 

PULL 2,64 cm (0.40 in ) 

65mm 

75mm 

"B" 

"C" 

"D" 


R 1/8 (1/8-28 BSPT) 1/8-27 

M5X0,8 #10-32 

M4X0,7 #8-32 

4,0 (.16") 

4,0 (.16") 

31,8 (1.25") 

SQ. 

23,8 

(.94") 

W 

5,0 

(.20") 

"A" + STROKE 

5,0 (.20") 

+ STROKE 

TYPE D 

18,5 (.73") 

(2 PLACES) 6,4 (.25") 


W 

Z 

X 

23,8 

(.94") 

8,0 (ÿ .315) ROD 

"C" TAP 

Z 

15,9 

(.63") 

Non Magnetic 


Y 

X 

15,9 

(.63") 

"D" TAP X 8,0 (.31") DP 

(4 PLACES) 


15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 3,14 cm (0.48 in ) 

47,0 (1.85") 

50mm 

2 2 

PULL 2,64 cm (0.40 in ) 

65mm 

75mm 

"B" PORT 

(2 PLACES) 


W 

Z 

Y 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M5X0,8 #10-32 

"D" M4X0,7 #8-32 

X 

Y 

4,8 (.19") 

(2 PLACES) 

31,8 (1.25") 

SQ. 

5,0 

(.20") 

"A" + STROKE 

18,5 (.73") 

(2 PLACES) 

5,0 (.2 0") 

+ STROKE 

TYPE D 

6,4(.25") 

11,6 (.46") 

W 

8,5 (.33") 

Z 

X 

"D" TAP X 6,0 (.24") DP 

(4 PLACES) 

Y 

8,0 (ÿ .315) ROD 

"C" TAP 

"B" PORT 

(2 PLACES) 

L15 20 

x 











MB - BOTH END MOUNT 




97

L15 20mm (3/4") Bore 

Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 3,14 cm (0.48 in ) 

62,0 (2.44") 

50mm 

2 2 

PULL 2,64 cm (0.40 in ) 

65mm 

75mm 

4,0 (.16") 

4,0 (.16") 

31,8 (1.25") 

SQ. 

23,8 

(.94") 

W 

5,0 

(.20") 

"A" + STROKE 

"B" 

"C" 

"D" 


R 1/8 (1/8-28 BSPT) 1/8-27 

M5X0,8 #10-32 

M4X0,7 #8-32 

5,0 (.20") 

+ STROKE 

TYPE D 

18,5(.73") 

(2 PLACES) 6,4 (.25") 


W 

X 

Z 

23,8 

(.94") 

8,0 (ÿ .315) ROD 

"C" TAP 

Z 

15,9 

(.63") 

Y 

X 

15,9 

(.63") 

"D" TAP X 8,0 (.31") DP 

(4 PLACES) 

"B" PORT 

(2 PLACES) 

SENSOR 

TRACK 



W 

Z 

X 

Y 

Y 

Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 3,14 cm (0.48 in ) 

62,0 (2.44") 

50mm 

2 2 

PULL 2,64 cm (0.40 in ) 

65mm 

75mm 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M5X0,8 #10-32 

"D" M4X0,7 #8-32 

4,8 (.1 9") 

(2 PLACES) 

31,8 (1.25") 

SQ. 

5,0 

(.20") 

"A" + STROKE 

18,5 (.73") 

(2 PLACES) 

5,0 (.20") 

+ STROKE 

TYPE D 

11,6 (.46") 

W 

6,4 (.25") 

8,5 (.33") 

Z 

X 

"D" TAP X 6,0 (.24") DP 

(4 PLACES) 

L15 

20 

x 


Y 

8,0 (ÿ .315) ROD 

"C" TAP 

M 

SENSOR 

TRACK 

(2 PLACES, 

90∞APART) 

"B" PORT 

(2 PLACES) 

98 
















LIMIT SENSORS 

(SEE PAGE 54 FOR DETAILS)

L15 25mm (1.0") Bore 

Non Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 4,91 cm (0.76 in ) 

53,0 (2.09") 

50mm 

2 2 

PULL 4,12 cm (0.64 in ) 

65mm 

75mm 

"B" 

"C" 

"D" 


R 1/8 (1/8-28 BSPT) 1/8-27 

M6X1,0 1/4-20 

M5X0,8 #10-32 

35,0 (1.38") 

SQ. 

5,0 (.20") 

25,0 

(.98") 

5,0 

(.20") 

"A" + STROKE 

21,0 (.83") 

(2 PLACES) 

5,0 (.20") 

+ STROKE 

TYPE D 

6,4 (.25") 

5,0 (.20") 

W 


W 

25,0 

(.98") 

10,0 (ÿ .394") ROD 

"C" TAP 

Z 

17,5 

(.69") 

Y 

X 

17,5 

(.69") 

"D" TAP X 10,0( .39") DP 

(4 PLACES) 

"B" PORT 

(2 PLACES) 


W 

Z 

X 

X 

Y 

Z 

Non Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 4,91 cm (0.76 in ) 

53,0 (2.09") 

50mm 

2 2 

PULL 4,12 cm (0.64 in ) 

65mm 

75mm 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M6X1,0 1/4-20 

"D" M5X0,8 #10-32 

Y 

6,0 (.24") 

(2 PLACES) 

12,5 (.49") 

35,0(1.38") 

SQ. 

W 

5,0 

(.20") 

"A" + STROKE 

21,0 (.83") 

(2 PLACES) 

5,0 (.20") 

+ STROKE 

TYPE D 

6,4 (.25") 

Z 

X 

"D" TAP X 7,5 (.30") DP 

(4 PLACES) 

10,0 (.39") 

Y 

10,0 (.394") ROD 

"C" TAP 

"B" PORT 

(2 PLACES) 

L15 25 

x 















99

L15 25mm (1.0") Bore 

Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 4,91 cm (0.76 in ) 

68,0 (2.68") 

50mm 

2 2 

PULL 4,12 cm (0.64 in ) 

65mm 

75mm 

"B" 

"C" 

"D" 


R 1/8 (1/8-28 BSPT) 1/8-27 

M6X1,0 1/4-20 

M5X0,8 #10-32 

35,0 (1.38") 

SQ. 

5,0 (.20") 

25,0 

(.98") 

5,0 

(.20") 

"A" + STROKE 

21,0 (.83") 

(2 PLACES) 

5,0 (.20") 

+ STROKE 

TYPE D 

6,4 (.25") 

5,0 (.20") 

W 


W 

25,0 

(.98") 

10,0 (ÿ .394") ROD 

"C" TAP 

Z 

17,5 

(.69") 

Magnetic 


Y 

X 

17,5 

(.69") 

"D" TAP X 10,0 (.39") DP 

(4 PLACES) 


15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 4,91 cm (0.76 in ) 

68,0 (2.68") 

50mm 

2 2 

PULL 4,12 cm (0.64 in ) 

65mm 

75mm 

"B" PORT 

(2 PLACES) 

SENSOR 

TRACK 



W 

Z 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M6X1,0 1/4-20 

"D" M5X0,8 #10-32 

Y 

X 

X 

Y 

Z 

6,0 (.24") 

(2 PLACES) 

12,5 (.49") 

35,0(1.38") 

SQ. 

W 

5,0 

(.20") 

"A" + STROKE 

21,0 (.83") 

(2 PLACES) 

5,0 (.20") 

+ STROKE 

TYPE D 

6,4 (.25") 

Z 

X 

10,0 (.39") 

"D" TAP X 7,5 (.30") DP 

(4 PLACES) 

Y 

10,0 (.394") ROD 

"C" TAP 

SENSOR 

TRACK 

(2 PLACES, 

90∞APART) 

"B" PORT 

(2 PLACES) 

L15 25 

x 


M 

100 
















LIMIT SENSORS 


L15 32mm (1-1/4") Bore 

Non Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 8,04 cm (1.25 in ) 

60,0 (2.36") 

50mm 

2 2 

PULL 6,91 cm (1.07 in ) 

65mm 

75mm 

"B" 

"C" 

"D" 


R 1/8 (1/8-28 BSPT) 1/8-27 

M8X1,25 5/16-18 

M6X1,0 1/4-20 

6,0(.24") 

6,0 (.24") 

42,0 (1.65") 

SQ. 

30,0 

(1.18") 

W 

4,4 (.17") 

6,0 

(.24") 

"A" + STROKE 

6,0 (.24") 

+ STROKE 

TYPE D 

23,7 (.93") 

(2 PLACES) 7,1 (.28") 


X 

W 

Z 

30,0 

(1.18") 

12,0 (ÿ .472") ROD 

"C" TAP 

Z 

21,0 

(.83") 

Non Magnetic 


Y 

X 

21,0 

(.83") 

"D" TAP X 12,0 (.47") DP 

(4 PLACES) 


15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 8,04 cm (1.25 in ) 

60,0 (2.36") 

50mm 

2 2 

PULL 6,91 cm (1.07 in ) 

65mm 

75mm 

"B" PORT 

(2 PLACES) 


W 

Z 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M8X1,25 5/16-18 

"D" M6X1,0 1/4-20 

Y 

X 

Y 

6,0 

(.24") 

"A" + STROKE 

6,0 (.24") 

+ STROKE 

TYPE D 

7,0 (.28") 

(2 PLACES) 

42,0 (1.65") 

SQ. 

4,4 (.17") 

23,7 (.93") 

(2 PLACES) 

14,0 (.55") 

W 

7,1 (.28") 

Z 

X 

14,0 (.55") 

"D" TAP X 9,0 (.35") DP 

(4 PLACES) 

Y 

12,0 (.472") ROD 

"C" TAP 

"B" PORT 

(2 PLACES) 

L15 32 

x 















101

L15 32mm (1-1/4") Bore 

Magnetic 


MODEL 

L15 

TYPE 

_,D 


15mm - 75mm 

"A" 

75,0 (2.95") 

PISTON AREA 

2 2 

PUSH 8,04 cm (1.25 in ) 

2 2 

PULL 6,91 cm (1.07 in ) 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M8X1,25 5/16-18 

"D" M6X1,0 1/4-20 

42,0 (1.65") 

SQ. 

6,0 

(.24") 

"A" + STROKE 

TYPE D 

6,0 (.24") 

+ STROKE 

6,0 (.24") 

6,0 (.24") 

30,0 

(1.18") 

W 

4,4(.17") 

23,7 (.93") 

(2 PLACES) 

7,1 (.28") 


W 

Magnetic 


MODEL 

L15 

30,0 

(1.18") 

12,0 (ÿ .472") ROD 

"C" TAP 

TYPE 

_,D 

Z 

21,0 

(.83") 

Y 

X 

21,0 

(.83") 

"D" TAP X 12,0 (.47") DP 

(4 PLACES) 

SENSOR 

TRACK 



PISTON AREA 

15mm - 75mm 75,0 (2.95") 

2 2 

PUSH 8,04 cm (1.25 in ) 

2 2 

PULL 6,91 cm (1.07 in ) 

"B" PORT 

(2 PLACES) 

Y 


W 

Z 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M8X1,25 5/16-18 

"D" M6X1,0 1/4-20 

Y 

X 

X 

Z 

6,0 

(.24") 

"A" + STROKE 

TYPE D 

6,0 (.24") 

+ STROKE 

7,0 (.28") 

(2 PLACES) 

42,0 (1.65") 

SQ. 

4,4 (.17") 

23,7 (.93") 

(2 PLACES) 

14,0 (.55 ") 

W 

7,1 (.28") 

Z 

X 

"D" TAP X 9,0 (.35") DP 

(4 PLACES) 

L15 

32 

x 

14,0(.55") 

12,0 (.472") ROD 

"C" TAP 


Y 

M 

SENSOR 

TRACK 

(2 PLACES, 

90∞APART) 

"B" PORT 

(2 PLACES) 

102 
















LIMIT SENSORS 


L15 40mm (1-1/2") Bore 

Non Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 12,56 cm (1.95 in ) 

76,5 (3.01") 

50mm 

2 2 

PULL 10,55 cm (1.64 in ) 

65mm 

75mm 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M10X1,5 3/8-24 

"D" M6X1,0 1/4-20 

50,0 (1.97") 

SQ. 

6,0 

(.24") 

"A" + STROKE 

6,0 (.24") 

+ STROKE 

TYPE D 

6,0 (.24") 

38,0 

(1.50") 

3,6 (.14") 

31,3 (1.23") 

(2 PLACES) 

8,7 (.34") 


W 

6,0 (.24") 

W 

X 

Z 

38,0 

(1.50") 

Z 

X 

25,0 

(.98") 


W 

Y 

16,0 (ÿ .630") ROD 

"C" TAP 

25,0 

(.98") 

Non Magnetic 


Y 

"D" TAP X 15,0 (.59") DP 

(4 PLACES) 


15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 12,56 cm (1.95 in ) 

76,5 (3.01") 

50mm 

2 2 

PULL 10,55 cm (1.64 in ) 

65mm 

75mm 

"B" PORT 

(2 PLACES) 

Z 

Y 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M10X1,5 3/8-24 

"D" M8X1,25 5/16-18 

X 

6,0 

(.24") 

"A" + STROKE 

6,0 (.24") 

+ STROKE 

TYPE D 

10,0 (.39") 

(2 PLACES) 

50,0 (1.97") 

SQ. 

3,6 

(.14") 

31,3 (1.23") 

(2 PLACES) 

15,0(.59") 

W 

8,7 (.34") 

Z 

X 

20,0 (.79") 

"D" TAP X 12,0 (.47") DP 

(4 PLACES) 

Y 

16,0 (ÿ .630) ROD 

"C" TAP 

"B" PORT 

(2 PLACES) 

L15 40 

x 















103

L15 40mm (1-1/2") Bore 

Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 12,56 cm (1.95 in ) 

91,5 (3.60") 

50mm 

2 2 

PULL 10,55 cm (1.64 in ) 

65mm 

75mm 

6,0 (.24") 

50,0 (1.97") 

SQ. 

38,0 

(1.50") 

6,0 

(.24") 

3,6 (.14") 

"A" + STROKE 

31,3 (1.23") 

(2 PLACES) 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M10X1,5 3/8-24 

"D" M6X1,0 1/4-20 

6,0 (.24") 

+ STROKE 

TYPE D 

8,7 (.34") 


W 

6,0 (.24") 

W 

X 

Z 

38,0 

(1.50") 

Z 

X 

25,0 

(.98") 

Y 


W 

16,0 (ÿ .630") ROD 

"C" TAP 

Y 

25,0 

(.98") 

Magnetic 


"D" TAP X 15,0 (.59") DP 

SENSOR 

(4 PLACES) 

TRACK 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 12,56 cm (1.95 in ) 

91,5 (3.60") 

50mm 

2 2 

PULL 10,55 cm (1.64 in ) 

65mm 

75mm 

"B" PORT 

(2 PLACES) 

Z 

Y 


"B" R 1/8 (1/8-28 BSPT) 1/8-27 

"C" M10X1,5 3/8-24 

"D" M8X1,25 5/16-18 

X 

10,0 (.39") 

(2 PLACES) 

50,0 (1.97") 

SQ. 

6,0 

(.24") 

3,6 

(.14") 

"A" + STROKE 

31,3 (1.23") 

(2 PLACES) 

6,0 (.24") 

+ STROKE 

TYPE D 

15,0 (.59") 

W 

8,7 (.34") 

Z 

X 

20,0 (.79") 

"D" TAP X 12,0 (.47") DP 

(4 PLACES) 

L15 

40 

x 

Y 

16,0 (ÿ .630) ROD 

"C" TAP 


M 

SENSOR 

TRACK 

(2 PLACES, 

90∞APART) 

"B" PORT 

(2 PLACES) 

104 
















LIMIT SENSORS 


L15 50mm (2.0") Bore 

Non Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 19,63 cm (3.04 in ) 

80,0 (3.15") 

50mm 

2 2 

PULL 17,62 cm (2.73 in ) 

65mm 

75mm 

"B" 

"C" 

"D" 


R 1/8 (1/8-28 BSPT) 

"EM" Option 

1/8-27 

M12X1,75 1/2-13 

M8X1,25 5/16-18 

6,6 (.26") 

6,6 (.26") 

63,0 (2.48") 

SQ. 

50,0 

(1.97") 

W 

6,0 

(.24") 

"A" + STROKE 

31,3 (1.23") 

(2 PLACES) 

6,0 (.24") 

+ STROKE 

TYPE D 

17,5 (.69") 


W 

50,0 

(1.97") 

20,0 (ÿ .787") ROD 

"C" TAP 

Z 

Non Magnetic 


Y 

X 

"D" TAP X 15,7 (.62") DP 

(4 PLACES) 

31,5 

(1.24") 

31,5 

(1.24") 


15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 19,63 cm (3.04 in ) 

80,0 (3.15") 

50mm 

2 2 

PULL 17,62 cm (2.73 in ) 

65mm 

75mm 

"B" PORT 

(2 PLACES) 

6,0 

(.24") 

"B" 

"C" 

"D" 


W 

Z 

Y 


R 1/8 (1/8-28 BSPT) 

"EM" Option 

1/8-27 

M12X1,75 1/2-13 

M8X1,25 5/16-18 

"A" + STROKE 

X 

X 

Y 

TYPE D 

6,0 (.24") 

+ STROKE 

Z 

10,0 (.39") 

(2 PLACES) 

63,0 (2.48") 

SQ. 

31,3 (1.23") 

(2 PLACES) 

W 

17,5 (.69") 

20,0 (.79") 

Z 

X 

23,0 (.91") 

"D" TAP X 15,0 (.59") DP 

(4 PLACES) 

Y 

20mm (ÿ .787") ROD 

"C" TAP 

"B" PORT 

(2 PLACES) 

L15 50 

x 















105

L15 50mm (2.0") Bore 

Magnetic 



15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 19,63 cm (3.04 in ) 

95,0 (3.74") 

50mm 

2 2 

PULL 17,62 cm (2.73 in ) 

65mm 

75mm 

6,6 (.26") 

6,6 (.26") 

63,0 (2.48") 

SQ. 

50,0 

(1.97") 

W 

6,0 

(.24") 

"A" + STROKE 

31,3 (1.23") 

(2 PLACES) 

"B" 

"C" 

"D" 


R 1/8 (1/8-28 BSPT) 1/8-27 

M12X1,75 1/2-13 

M8X1,25 5/16-18 

6,0 (.24") 

+ STROKE 

TYPE D 

17,5 (.69") 


W 

50,0 

(1.97") 

20,0 (ÿ .787") ROD 

"C" TAP 

Z 

Magnetic 


Y 

X 

"D" TAP X 15,7 (.62") DP 

(4 PLACES) 

31,5 

(1.24") 

31,5 

(1.24") 

SENSOR 

TRACK 

(2 PLACES, 

180∞APART) 


15mm 

L15 _,D 

25mm 

2 2 

40mm 

PUSH 19,63 cm (3.04 in ) 

95,0 (3.74") 

50mm 

2 2 

PULL 17,62 cm (2.73 in ) 

65mm 

75mm 

6,0 

(.24") 

"B" PORT 

(2 PLACES) 

"B" 

"C" 

"D" 


W 

Z 

Y 


R 1/8 (1/8-28 BSPT) 

"EM" Option 

1/8-27 

M12X1,75 1/2-13 

M8X1,25 5/16-18 

"A" + STROKE 

X 

X 

Y 

TYPE D 

6,0 (.24") 

+ STROKE 

Z 

10,0 (.39") 

(2 PLACES) 

63,0 (2.48") 

SQ. 

31,3 (1.23") 

(2 PLACES) 

W 

17,5 (.69") 

20,0 (.79") 

Z 

X 

23,0 (.91") 

"D" TAP X 15,0 (.59") DP 

(4 PLACES) 

L15 

50 

x 


Y 

20mm (ÿ .787") ROD 

"C" TAP 

M 

SENSOR 

TRACK 

(2 PLACES, 

180∞APART) 

"B" PORT 

(2 PLACES) 

106 
















LIMIT SENSORS 


Rotary Actuators 

Nason Rotary Actuators are available in 

two series. The NRF series is a flange 

output with precision end stop positioning, 

and the NRS series is a shaft output for 

simple rotary applications such as diverter 

gates, escapements and ejection stations. 

Both the NRF and NRS series have 

rotational capabilities up to 180 degrees, 

torque ranges from 8 in-lbs up to 68 

in-lbs and are manufactured from 7000 

series aluminum. The NRF has payload 

capabilities from 1 lb up to 15 lbs and all 

rotaries are field repairable. 

ROTARY ACTUATORS

Rotary Actuator NRF-19M Flanged Series 

2.69 

[68] 

.7500 

[19.05] 

[M3 X 5 DP] 

DO NOT EXCEED DEPTH 

[ 3H7 X 4 DP] 

5.9 3 

[151] 

2.13 ±0.02 

[54 ±0.5] 

.7500 

[19.05] 

.938 

[23.8] 

1.875 

[47.6] 

1 TO 3° 

OVERTRAVEL 

BOTH ENDS 

M 10 X 1. 0 

[ 4.4] THRU 

1.156 

[29.4] 

.705 

[17.9] 

1.125 

[28.5] 

1.875 [47.6] 

2.125 [54.0] 

UN IT SHOWN IN 0 POSITIO N 

ROTATED FU LLY C W 

1.938 

[49.2] 

1.886 

[47.9] 

[M4] THRU TOP FLANGE 

4X [ 3.3] THRU TOP FLANGE 

1.529 

[38.8] 

1.313 

[33.4] 

"A " 

"A" 

2X [M5 X 5 DP] 

AIR PORTS 

O DRF-003 

SH OW N 

-S SHOCK ABSO RBER OPTIO N 

SHOWN ABOVE 

SH OCKS FULLY ACTIVATED ON LY A T 

45 , 90 , 135 AND 180 ROTATION S 

IM TERM EDIATE ROT AT ION WI LL REDUCE 

SH OCK ABSORB ER ABI LI TY A ND PAYLOAD 

MU ST BE REDUCE D 

HA RD STOP 

AD JUST IN G SCREWS 

1.76 

[44] 

1.875 

[47.6] 

.750 

[19.1] 

[ 3.3] THRU BOTTOM FLANGE 

[M4] THRU BOTTOM FLANGE 

2X .7 2 

[18] 

2X .2 5 

[6 ] 

1.5000 

[38.10] 

DOWELS 

1.500 

[38.1] 

1.875 

[47.6] 

2X .2 5 

[6 ] 

1.53 

[37] 

VI EW "A-A" 

C L PINIO N 

M AX FOR STANDA RD ROTATION S 

[M5 X 5 DP] 

[ M5 H7 X 5 DP] 

Dimensions are 

symmetrical about 

centerline 

UNLESS OTHERWISE NOTED ALL TOLERANCES ARE AS SHOWN BELOW 

Imperial in. Metric [mm] 

Third Angle 

Projection 

All Dowel Holes are SF (Slip Fit). 

Locational Tolerance 

±.0005" or [±.013mm] 

Metric Threads 

Course Pitch 

0.00 = ±.01 [0.] = [±.25] 

0.000 = ±.005 [0.0] = [±.13] 

0.0000 = ±.0005 [0.00] = [±.013] 

How to Order: (Order Accessories separately from Basic Model) 

BASIC MODEL 

NRF - 19 M - 

ROTATION 

- S 

SHOCK ABSORBERS 

DEGREES OF ROTATION: 45°, 90°, 135°,180° 

(Consult factory for intermediate degrees of rotation) 

ROTARY ACCESSORIES ORDER # QTY/UNIT 

Turntable Blank, Metric RBTT - 19 1 

SENSOR ACCESSORIES ORDER # QTY/UNIT 

Magneto Resistive Sensor (PNP)* Consult Factory 1 or 2 

Magneto Resistive Sensor (NPN)* Consult Factory 1 or 2 

REPAIR KITS ORDER # QTY/UNIT 

Seal Repair Kit (Standard Buna-N) KR - NRF19 1 

Shock Seal Repair Kit KR - SNRF19 1 

*Sensor and cable sold separately 

108



NRF-19M 

Maximum Payload with shocks (-S) ................... 1 lbs. 0.45 kg 

Maximum Payload without shocks ..................... 0.5 lbs. 0.23 kg 

Maximum Payload Inertia with shocks (-S) ........ 0.0016 in-lbs.-sec. 2 1.8 X10 -4 N-m-sec. 2 

Maximum Payload Inertia without shocks .......... 0.0008 in-lbs.-sec. 2 9.0 X10 -5 N-m-sec. 2 

Maximum Torque @ 100psi/7 bar ...................... 8.3 lbs.-in. 0.9 N-m 

Maximum Rotation .............................................. 180° 180° 

Pitch Diameter of Pinion...................................... 0.375 in. 9.5 mm 

Weight with shocks (-S Option)........................... 0.72 lbs. 0.34 kg 

Weight without shocks ....................................... 0.54 lbs. 0.24 kg 

Pressure Range ................................................... 40-100 psi 3-7 bar 

Bore..................................................................... 0.750 in. 19.1 mm 

Displacement (180°)............................................ 0.31 in 3 . 5.1 cm 3 

Actuation Time (180° @ 100psi/7 bar) ............... 0.38 sec. 0.38 sec. 

Actuation Time (90° @ 100psi/7 bar) ................ 0.29 sec. 0.29 sec. 

Over Travel (each end)......................................... 1° to 3° 1° to 3° 

Temperature Range without Shocks ................... -30°~180° F -35°~82° C 

Temperature Range with Shocks (-S) ................ 32°~150° F 0°~66° C 

End Stop Adjustability (each end)........................ 23° 23° 

Repeatability........................................................ ±0.02° ±0.02° 

Valve required to actuate..................................... 

4-way, 2-position 

Loading Capacity Static Dynamic 

Maximum Tensile T 10 lbs. [44 N] 2 lbs. [9 N] 

Maximum Compressive C 20 lbs. [89 N] 4 lbs. [18 N] 

Maximum Moment Mx 20 in-lbs. [2.3 Nm] 4 in-lbs. [0.5 Nm] 

Maximum Moment My 20 in-lbs. [2.3 Nm] 4 in-lbs. [0.5 Nm] 

Maximum Payload W (with shocks) 

1.0 lbs. [0.45 kg] 

Maximum Inertia J (with shocks) 0.0016 in-lbs.-sec. 2 

(1.8 X 10 -4 N-m-sec. 2 ) 

Note: Higher payloads and inertia possible with external shocks and stops. 

"C" 

W,J 

"T" 

"M",x 

"X" 

"Z" 

"M",y 

"Z" 

"Y" 

Accessory Mounting Technical Data 

2. 38 .0 3 

[ 60 .8 ] 

RBTT-19 

.715 

[18.1] 

BL AN K 

T URNTABL E 

4X . 0938 SF THRU 

[ 3 H7 THRU] 

0.727 

[18.5] 

Flanged Output Options 

• Easily machinable by customer 

• Blank Turntable, easily removed, pin located 

• High quality aircraft aluminum, Black anodize finish 

• Mounts through pinion with one screw & two dowels 

Sensors 

• PNP and NPN Magneto 

Resistive available 

• Sensors are slot mounted, 

no mounting kits required 

• Simple adjustment with slotted 

screw driver 

• Built-in LED for ease of positioning 

and troubleshooting 

• Sensor Magnet standard 

109


3.38 

[86] 

.7500 

[19.05] 

[M3 X 6 DP] 


[ 3 H7 X 5 DP] 

7.45 

[189] 

2.78 ±0.02 

[71 ±0.5] 

2.406 

[61.1] 

.7500 

[19.05] 

1.203 

[30.6] 

1 TO 3° 

OVERTRAVEL 

BOTH ENDS 

M 12 X 1. 0 

[ 5.3] THRU 

1.375 

[34.9] 

2.375 [60.3] 

2.781 [70.6] 



2.375 

[60.3] 


4X [ 5.1] THRU TOP FLANGE 

"A " 

O DRF-009 

SH OW N 

2.04 

[52] 

1.313 

[33.3] 

.844 

[21.4] 

2.468 

[62.7] 

2.375 

[60.3] 

1.500 

[38.1] 

1.764 

[44.8] 

1.531 

[38.9] 

"A" 

2X [M5 X 11 DP] 

AIR PORT S 




SHOWN ABOVE 

SH OCKS FULLY ACTIVATED ONLY AT 

45 ,90 , 135 AND 180 ROTATION S 




.8 1 

[21] 

HA RD STOP 


2X .4 1 

[10] 

1.5000 

[38.10] 

DOWELS 

1.500 

[19.1] 

2.406 

[61.1] 

.2 8 

[7 ] 

C L PINIO N 

1.85 

[49] 

VI EW "A-A" 


M5 X 8DP .750 

[19.1] 

[ M5 H7 X 7 DP] 



Dimensions are Third Angle All Dowel Holes are SF (Slip Fit). Metric Threads 0.00 = ±.01 [0.] = [±.25] 

symmetrical about Projection Locational Tolerance Course Pitch 0.000 = ±.005 [0.0] = [±.13] 

centerline 

±.0005" or [±.013mm] 

0.0000 = ±.0005 [0.00] = [±.013] 


BASIC MODEL 

NRF - 24 M - 

ROTATION 

- S 













110



NRF-24M 

Maximum Payload with shocks (-S) ................... 3 lbs. 1.4 kg 


Maximum Payload Inertia with shocks (-S) ........ 0.0111 in-lbs.-sec. 2 1.3 X10 -3 N-m-sec. 2 








Bore..................................................................... 0.938 in. 23.8 mm 


Actuation Time (180° @ 100psi/7 bar) .............. 0.38 sec. 0.38 sec. 







Valve required to actuate..................................... 4-way, 2-position 







3 lbs. [1.4 kg] 


(1.3 X 10 -3 N-m-sec. 2 ) 


"C" 

W,J 

"T" 

"M",x 

"X" 

"Z" 

"M",y 

"Z" 

"Y" 


3. 00 .0 3 

[ 76 .8 ] 

RBTT-24 

0.727 

[18.5] 

4X . 0938 S F THRU 

[ 3 H7 THRU] 

BL AN K 

T URNTABL E 

.734 

[18.6] 






Sensors 






screw driver 




111


4.54 

[115] 

1.5000 

[38.10] 

[M5 X 8 DP] 


[ 5 H7 X 5 DP] 

9.84 

[250] 

3.94 ±0.02 

[100 ±0.5] 

1.5000 

[38.10] 

1.625 

[41.3] 

3.250 

[82.6] 

1 TO 3° 

OVERTRAVEL 

BOTH ENDS 

M 14 X 1. 5 

2.000 

[50.8] 

3.250 [82.6] 

3.938 [100.0] 



3.406 

[86.5] 

[M6] 

THRU TOP FLANGE 

4X [ 6.0] 


"A " 

O DRF-015 

SH OW N 

2.59 

[66] 

1.688 

[42.9] 

1.031 

[26.2] 

3.690 

[93.7] 

2.500 

[63.5] 

1.500 

[38.1] 

2.279 

[57.9] 

1.938 

[49.2] 

"A" 

2X [M5 X 13 DP] 

AIR PORTS 

[ M8 H7 THRU BOTTOM FLANGE ] 



SHOWN ABOVE 


45 ,90 , 135 AND 180 ROTATION S 




HA RD STOP 

AD JUST IN G SCRE W 

3.0000 

[76.20] 

DOWELS 

1.5000 

[38.10] 

DOWELS 


1.500 

[38.1] 

3.000 

[76.2] 

1.13 

[29] 

.3 1 

[8 ] 

3.03 

[74] 

C 

L PINIO N 

VI EW "A-A" 


2X.7 5 

[19] 

M5 X 7 DP 

[ M5 H7 X 5 DP] 

.750 

[19.1] 



Dimensions are Third Angle All Dowel Holes are SF (Slip Fit). Metric Threads 0.00 = ±.01 [0.] = [±.25] 

symmetrical about Projection Locational Tolerance Course Pitch 0.000 = ±.005 [0.0] = [±.13] 

centerline 

±.0005" or [±.013mm] 

0.0000 = ±.0005 [0.00] = [±.013] 


BASIC MODEL 

NRF - 27 M - 

ROTATION 

- S 













112



NRF-27M 

Maximum Payload with shocks (-S ) .................. 8 lbs. 3.6 kg 

Maximum Payload without shocks ..................... 4 lbs. 1.8 kg 

Maximum Payload Inertia with shocks (-S ) ........ 0.0414 in-lbs.-sec. 2 4.7 X10 -3 N-m-sec. 2 








Bore..................................................................... 1.063 in. 27.0 mm 


Actuation Time (180° @ 100psi/7 bar) .............. 0.60 sec. 0.60 sec. 















8 lbs. [3.6 kg] 


(4.7 X 10 -3 N-m-sec. 2 ) 


"C" 

W,J 

"T" 

"M",x 

"X" 

"Z" 

"M",y 

"Z" 

"Y" 


4. 00 .0 3 

[ 102 .8 ] 

RBTT - 27 

0.727 

[18.5] 

4X . 1875 S F THRU 

[ 5 H7 THRU] 

BL AN K 

T URNTABL E 

.715 

[18.2] 






Sensors 






screw driver 




113


5.25 ±0.02 

[133 ±0.5] 

6.02 

[153] 

1.5000 

[38.10] 

[M5 X 9 DP] 


[ 5 H7 X 6 DP] 

11.85 

[301] 

1.5000 

[38.10] 

4.500 

[114.3] 

2.250 

[57.2] 

4.500 [114.3] 

5.250 [133.4] 



4.125 [ 104.8] 

2.250 

[57.2] 


4X [ 9.9] 


"A " 

1 TO 3∞ 

OVERTRAVEL 

BOTH ENDS 

2X [G1/8 X 8 DP] 

AIR PORTS 

O DRF-021 

SH OW N 

M 20 X 1. 5 

3.20 

[81] 

2.115 

[53.7] 1.325 

[33.7] 

4.750 [120.7] 

2.821 

[71.7] 

2.450 

[62.2] 

"A " 

[ M8 H7 X 10 DP] 

- S SHOCK ABSO RBER OPTIO N 

SHOWN ABOVE 


45 ,90 , 135 AND 180 ROTATIONS 




4.500 [114.3] 

3.000 [76.2] 



HA RD STOP 


[M10 X 16 DP] 

1.44 

[37] 

2X.8 1 

[19] 

3.0000 1.5000 

[76.20] [38.10] 

DOWELS DOWELS 

1.500 

[38.1] 

3.000 

[76.2] 

4.500 

[114.3] 

.3 8 

[10] 

3.62 

[86] C L PINION 

VI EW "A-A" 


[M5 X 7 DP] 

1.500 

[38.1] 

.750 

[19.1] 

[ M5 H7 X 5 DP] 



centerline 



Third Angle 

Projection 



±.0005" or [±.013mm] 


Course Pitch 

0.00 = ±.01 [0.] = [±.25] 

0.000 = ±.005 [0.0] = [±.13] 

0.0000 = ±.0005 [0.00] = [±.013] 


BASIC MODEL 

NRF - 33 M - 

ROTATION 

- S 













114



NRF-33M 

Maximum Payload with shocks (-S ) ................... 15 lbs. 6.8 kg 


Maximum Payload Inertia with shocks (-S ) ........ 0.0970 in-lbs.-sec. 2 1.1 X10 -2 N-m-sec. 2 


Maximum Torque @ 100psi/7 bar ...................... 67.6 lbs-in. 7.6 N-m 



Weight with shocks (-S Option)........................... 6.8 lbs. 3.1kg 



Bore..................................................................... 1.313 in. 33.4 mm 

















15 lbs. [6.8 kg] 


(1.1 X 10 -2 N-m-sec. 2 ) 


"C" 

W,J 

"T" 

"M",x 

"X" 

"Z" 

"M",y 

"Z" 

"Y" 


5. 25 .03 

[ 133 . 8] 

RBTT - 33 

0.727 

[18.5] 

BL AN K 

T URNTABL E 

4X . 1875 S F THRU 

[ 5 H7 THRU] 

.734 

[18.6] 






Sensors 






screw driver 




115

NRF Series Assembled View 

10 

4 

9 

8 

1 

2 

7 

Item Qty Name 

01 1 Body 

02 1 Pinion Shaft 

04 1 Upper Bearing 

06 1 Rack 

07 1 Piston 

08 1 Upper Bearing Retainer 

09 1 Hub 

10* 2 Stop Pucks 

20 2 Fixed Orifices 

21 2 Stop Screws 

24 2 Shock Blocks 

25 2 Shocks 

6 

21 

20 

Warning: R emoval of 

Orfi ces w ill void 

wa rrant y 

-S O ption Show n 

S hock Absorber s 

24 

25 

*NOTES: 

1) Contact the Nason Sales 

Department for a complete spare parts 

list with order numbers and prices. 

2) Item #10 Quantity 1 for 180° rotations, 

all other rotations Quantity 2. 

Accessory Installation & Adjustment Instructions 

51 

52 

54 

60 

59 

58 

57 

56 

50 

Item Qty Name 

50 1 Soc Head Cap Screw 

51 1 Blank Turntable 

52 1 DIRECTCONNECT Turntable 

54 2 Dowel Pins 

57 1 or 2 Magneto Resistive Sensor, with Quick Disconnect 

Magneto Resistive Sensors 

1) Insert sensors #57 or #60 from either end of the profile 

slots and set the sensor with the integrated slotted 

screw set. 

Turntable 

1) Insert the two Dowel Pins #54 into the hub (slip fit). 

2) Attach the turntable #51 or #52, onto the dowel Pins. 

3) Put thread lock on the Socket Head Screw #50, insert 

it through the Pinion and tighten. 

116

Rotary Actuator NRS-19M Shaft Output Series 

2.13 ±0.02 

[54 ±0.5] 

.08 TO BASE 

[2] OF KEY 

1.875 

[47.6] 

.938 

[23.8] 

2.69 

[68] 

1 TO 3° 

OVERTRAVEL 

BOTH ENDS 

[3+.03-.0] 

KEYWAY 

4.08 

[104] 

Max 

1.125 

[28.6] 

1.875 [47.6] 

2.125 [54.0] 

UNIT SHOWN IN 0 POSITION 

ROTATED FULLY CW 

[M 4] THRU TOP FLANGE 

[ 3.3] THRU TOP FLANGE 

"A" 

.705 

[17.9] 

1.886 

[47.9] 

1.875 

[47.6] 

1.313 

[33.4] 

1.37 

[35] 

[M5 X 5 DP] 

AIR PORTS 

"A" 



2X .25 

[6] 

-ADJ ROTATIONAL ADJUSTMENT OPTION 

SHOWN ABOVE 

ALLOWS UP TO 23 ADJUSTMENT 

EACH SIDE 

+.000 

.311 -.002 

[7.9+.0-.05] 

2X .72 

[18] 

VIEW "A-A" 

1.00 

[25] 

2X .25 

[6] 

2.51 

[64] 

1.5000 

[38.10] 

DOWELS 

1.500 

[38.1] 

1.875 

[47.6] 

[ M5 H7 X 5 DP] .750 

[M5 X 5 DP] 

[19.1] 

UNLESS OTHERWISE NOTED ALL 

TOLERANCES ARE AS SHOWN BELOW 



centerline 


Course Pitch 

Third Angle 

Projection 



±.0005" or [±.013mm] 


0.00 = ±.01 [0.] = [±.25] 

0.000 = ±.005 [0.0] = [±.13] 

0.0000 = ±.0005 [0.00] = [±.013] 


BASIC MODEL ROTATION DEGREES OF ROTATION: 45°, 90°, 135°,180° 

(for intermediate degrees of rotation use -ADJ option) 

NRS - 19M - 

- ADJ 

ROTATIONAL ADJUSTMENTS 





Seal Repair kit (Standard Buna-N) KR-NRS19 1 

Rotational Adjustment Seal Kit (Standard Buna-N) KR-ADJNRS19 1 


117



NRS-19M 

Maximum Payload.............................................. 0.5 lbs. 0.23 kg 

Maximum Payload Inertia................................... 0.0008 in-lbs.-sec. 2 9.0 X10 -5 N-m-sec. 2 

Maximum Torque @ 100psi/7 bar ..................... 8.3 lbs.-in. 0.9 N-m 

Maximum Rotation............................................. 180° 180° 

Pitch Diameter of Pinion..................................... 0.375 in. 9.5 mm 

Weight without rotational adjuster ..................... 0.52 lbs. 0.24 kg 

Weight without rotational adjuster (-ADJ option) 0.72 lbs. 0.33 kg 

Pressure Range.................................................. 40-100 psi 3-7 bar 

Bore.................................................................... 0.750 in. 19.1 mm 

Displacement (180°) .......................................... 0.31 in 3 . 5.1 cm 3 

Actuation Time (180° @ 100psi/7 bar) ............. 0.38 sec. 0.38 sec. 


Temperature Range: Standard Seals.................. -30°~180° F -35°~82° C 

End Stop Adjustability (-ADJ option) .................. 23° 23° 

Over Travel (each end)........................................ 1° to 3° 1° to 3° 

Valve required to actuate ................................... 







Maximum Payload W 

0.5 lbs. [.23 kg] 

Maximum Inertia J .0008 in-lbs.-sec. 2 

[9.0 X 10 -5 N-m-sec. 2 ] 


"C" 

"T" 

W,J 

"M",x 

"X" 

"Z" 

"Z" 

"M",y 

"Y" 


0.727 

[18.5] 

Sensors 

• PNP and NPN Magneto Resistive available 

• Sensors are slot mounted, no mounting kits required 

• Simple adjustment with slotted screw driver 

• Built-in LED for ease of positioning and troubleshooting 


.715 

[18.1] 

118


.11 TO BASE 

[3] OF KEY 

2.78 ±0.02 

[71 ±0.5] 

2.406 

[47.6] 

3.38 

[85] 

[3+.03-.0] 

KEYWAY 

5.22 

[135] 

Max 

1.203 

[23.8] 

1 TO 3° 

OVERTRAVEL 

BOTH ENDS 

1.375 

[34.9] 

2.375 [60.3] 

2.781 [70.6] 




[ 5.1] THRU TOP FLANGE 

"A" 

.844 

[21.4] 

1.531 

[38.9] 

1.72 

[44] 


SHOWN ABOVE 


EACH SIDE 

2.468 

[62.7] 

2.375 

[60.3] 

1.500 

[38.1] 

[M5 X 6 DP] 

AIR PORTS 

"A" 



2X .81 

[21] 

+.000 

.374 -.002 

[9.50+.0/-.05] 

1.13 

[39] 

2X .41 

[10] 

3.02 

[76] 

1.5000 

[38.10] 

DOWELS 

1.500 

[38.1] 

2.406 

[61.1] 

2X .28 

[7] 

VIEW "A-A" 



[ M5 H7 X 8 DP] 

.750 

[19.1] 

[M5 X 8 DP] 



centerline 


Course Pitch 

Third Angle 

Projection 



±.0005" or [±.013mm] 


0.00 = ±.01 [0.] = [±.25] 

0.000 = ±.005 [0.0] = [±.13] 

0.0000 = ±.0005 [0.00] = [±.013] 




NRS - 24M - 

- ADJ 









119



NRS-24M 



Maximum Torque @ 100psi/7 bar ..................... 17.3 lbs.-in. 1.9 N-m 






Bore.................................................................... 0.938 in. 23.8 mm 





End Stop Adjustability (-ADJ option)................... 23° 23° 










1.5 lbs. [0.68 kg] 

Maximum Inertia J 0.0056 in-lbs.-sec. 2 

[6.3 X 10 -4 N-m-sec. 2 ] 


"C" 

"T" 

W,J 

"M",x 

"X" 

"Z" 

"Z" 

"M",y 

"Y" 


0.727 

[18.5] 

Sensors 






1.004 

[25.5] 

120


.17 TO BASE 

[4] OF KEY 

4.54 

[102] 

6.97 

[177] 

Max 

3.94 ±0.02 

[100 ±0.5] 

3.250 

[82.6] 

1.625 

[41.3] 

1 TO 3° 

OVERTRAVEL 

BOTH ENDS 

[3+.03-.0] 

KEYWAY 

2.000 

[50.8] 


3.250 [82.6] [ 6.0] THRU TOP FLANGE 

3.938 [100.0] 

UNIT SHOWN IN 0 POSITIO N 


"A" 

1.031 

[26.2] 

1.938 

[49.2] 

2.19 

[55.6] 

"A" 

3.690 

[93.7] [M5 X 6 DP ] 

AIR PORTS 

2.500 

[38.1] 

1.500 

[60.3] 

[ M8 H7 THRU BOTTOM FLANGE] 




SHOWN ABOVE 


EACH SIDE 

+.000 

.499 -.002 

[12.7+.0/-.05] 

2X 1.13 

[29] 

1.75 

[44] 

2X .75 

[19] 

4.01 

[102] 

3.0000 

[76.20] 

DOWELS 

1.5000 

[38.10] 

DOWELS 

1.500 

[38.1] 

3.000 

[76.2] 

2X .31 

[8] 

VIEW "A-A" 



[ M5 H7 X 5 DP] 

.750 

[19.1] 

[M5 X 7 DP] 



centerline 


Course Pitch 

Third Angle 

Projection 



±.0005" or [±.013mm] 


0.00 = ±.01 [0.] = [±.25] 

0.000 = ±.005 [0.0] = [±.13] 

0.0000 = ±.0005 [0.00] = [±.013] 




NRS - 27M - 

- ADJ 









121



NRS-27M 

Maximum Payload.............................................. 4 lbs. 1.8 kg 

Maximum Payload Inertia................................... . 0.0207 in-lbs.-sec. 2 2.3 X10 -3 N-m-sec. 2 

Maximum Torque @ 100psi/7 bar ..................... 33.2 lbs.- in. 3.8 N-m 


Pitch Diameter of Pinion..................................... . 0.750 in. 19.1 mm 




Bore.................................................................... 1.063 in. 27.0 mm 















4 lbs. [1.8 kg] 


[2.3 X 10 -3 N-m-sec. 2 ] 


"C" 

"T" 

W,J 

"M",x 

"X" 

"Z" 

"Z" 

"M",y 

"Y" 


0.727 

[18.5] 

Sensors 






.715 

[18.2] 

122


.18 TO BASE 

[5] OF KEY 

6.02 

[153] 

8.81 

[224] 

Max 

5.25 ±0.02 

[133 ±0.5] 

[3+.03-.0] 

KEYWAY 

4.500 

[82.6] 

2.250 

[41.3] 

1 TO 3° 

OVERTRAVEL 

BOTH ENDS 

2.250 

[M10] THRU TO P FLANGE 

[50.8] 

4.500 [114.3] [ 9.9] THRU TOP FLANGE 

5.250 [133.4] 



[G1/8 X 8 DP] 

AIR PORTS 

"A" 

1.325 

[33.7] 

2.450 

[62.2] 

2.71 

[68.8] 


SHOWN ABOVE 

ALLOWS UP T0 23 ADJUSTMENT 

EACH SIDE 

4X 3/8-16 X .62 DP 

[M10 X 16 DP] 

4.750 [120.7] 

4.500 

[114.3] 

3.000 

[76.2] 

"A" 

[ M8 H7 X 10 DP] 



2X 1.44 

[37] 

+.000 

.593 -.002 

[15.1+.0/-.05] 

2.13 

[54] 

2X .81 

[21] 

5.02 

[128] 

3.0000 

[76.20] 

DOWELS 

1.5000 

[38.10] 

DOWELS 

1.500 

[38.1] 

3.000 

[76.2] 

4.500 

[114.3] 

2X .38 

[7] 

VIEW "A-A" 



[ M5 H7 X 5 DP] 

.750 

[19.1] 

1.500 

[38.1] 

[M5 X 7 DP] 



centerline 


Course Pitch 

Third Angle 

Projection 



±.0005" or [±.013mm] 


0.00 = ±.01 [0.] = [±.25] 

0.000 = ±.005 [0.0] = [±.13] 

0.0000 = ±.0005 [0.00] = [±.013] 




NRS - 33M - 

- ADJ 









123



NRS-33M 



Maximum Torque @ 100psi/7 bar ..................... 68 lbs-in. 7.6 N-m 






Bore.................................................................... 1.313 in. 33.4 mm 















7.5 lbs. [3.4 kg] 


[5.5 X 10 -3 N-m-sec. 2 ] 


"C" 

"T" 

W,J 

"M",x 

"X" 

"Z" 

"Z" 

"M",y 

"Y" 


0.727 

[18.5] 

Sensors 






.715 

[18.2] 

124

NRS Series Assembled View 

22 

4 

1 

2 

8 

9 

Item Qty Name 

7 

12 

11 

21 

S hown with -ADJ Option 

Ro tational Adjusters 

01 1 Body 

02 1 Pinion Shaft 

04 1 Upper Bearing 

06 1 Rack 

07 1 Piston 

08* 1 Bearing Retainer 

09* 1 Retaining Ring 

11 2 Gasket 

12 2 Bumper 

20 2 Fixed Orifice 

21 2 Angle Adjuster 

22 2 End Plate Rotational 

Adjuster 

6 

20 

Warning: Removal of Orifices will void warranty. 

*NOTES: 

1) Contact the Nason Sales 

Department for a complete spare parts 

list with order numbers and prices. 

2) Item #09 is for size -075 only. 

125

Engineered 

Solutions For 

Your Application... 

Custom Products 

Stop working around everyone else’s 

standard cylinder. Your machine is unique 

so why not have Nason design a unique 

custom cylinder for your specific application. 

Just show us what you want and we can 

provide a prototype for your approval. On 

the following pages are some examples 

of solutions we have provided other 

customers. Each one was unique in its 

design parameters. Some are made from 

specific materials or have unique coatings 

for harsh or clean room environments, some 

are made for high output in a small package, 

and some are just plain unusual. Talk to 

Nason about your next design need and you 

will be pleasantly surprised.

Nason 

Custom 

Products 

Specialty Slides 

“All stainless steel” slide designed 

for heavy wash down application in 

the food packaging industry. 

Powerful “1500 PSI hydraulic” slide 

in a compact package. 

A low cost simple slide. 

A heavy duty load carrying cylinder, 

made from plastic, for a highly 

corrosive environment. 

Need a direct replacement of a 

competitor’s product? Nason can 

help.

Special Materials 

and Coatings 

Custom Projects 

Food Grade 

Plastic cylinders up to 2 1⁄2” 

bore. Great for wash down 

environments. 

Z Compliance 

Special compliance devices 

that will meet your special 

needs are available. When 

you can’t find what you need 

in the marketplace just give 

us a call. 

All Steel 

Great for heavy duty 

applications. 3000 psi 

hydraulic cylinders available 

in up to 3” bores. 

Hard Coat Anodized 

with Teflon 

For those applications that 

require extremely low friction 

at very high speeds. 

Locking Cylinders 

Custom mechanical locking 

cylinders designed for a true 

locking application. 

Multi-bore Cylinders 

Multiple cylinders in a 

common housing. This 

allows for multiple cylinders 

to fit in tight spaces and 

hold tight tolerances. 

Valve Manifold Cylinder 

With the valve mounting 

directly to the cylinder, 

response times are 

very quick. 

Hard Coat Anodizing 

We can hard coat anodize 

any aluminum cylinder 

manufactured by Nason to 

help prevent corrosion. 

Adjustable Stroke 

Dial in your stroke with our 

adjustable extend stroke 

cylinder. 

All Stainless Steel 

We can manufacture most of 

our product line out of 303 

stainless steel. 

Air to Oil booster 

From 4:1 intensification 

up to 50:1 and hydraulic 

outputs up to 5000 PSI.

Coming Soon! 

Our new, expanded Nason 

switch catalog. 

At Nason, we are fanatical about 

responding to our customer’s exact 

requests. It’s what sets us apart from 

the competition. So for most design 

engineers, our catalog is not just our 

product listing... it’s our starting point. 

When it comes to switches, Nason 

has the industry’s widest range of 

options including set points, fluid and 

electrical connections, switch circuitry, 

current ratings, severe duty service 

and more. And our manufacturing 

strategy means we are able to deliver 

you switches quickly, economically 

even with prototype assignments. So, 

when it comes to making switches 

that meet your exact needs, we 

deliver. At Nason, we don’t think of 

that as custom work...we think of it as 

customer service. That’s what Nason’s 

New Thinking is all about.

1307 S Highway 11 • Walhalla SC 29691 

800.229.4955 • Phone: 864.638.9521 

Fax: 864.638.7903 • Orders: 800.229.4955 

www.nasonptc.com 

WARRANTY: 

It is the sole responsibility of the user to determine the suitability of any product or information 

supplied by Nason for any application or use by the user. 

THE FOLLOWING IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 

THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

The Nason Company warrants each product to be free from defects in material and workmanship 

under normal use and service. Nason’s obligation under this warranty is limited to repairing of or 

supplying, at our option, a part or parts to replace any defective part(s) within one (1) year from the 

date of original sale. Wear components including but not limited to seals, wear bands, and bearings 

are excluded from this warranty. No product will be returned without prior authorized approval. If 

authorized, the transportation charges are to be prepaid to The Nason Company, Walhalla, SC. 

Unauthorized returns will be returned freight collect. The provisions of this warranty will not apply 

to any part(s) which have been subject to misuse, negligence, or accident, or which have been 

repaired or altered outside of The Nason Company service department in any way so as in the 

judgement of Nason to adversely affect its performance, stability, or reliability. The Nason Company 

neither assumes nor authorizes anyone to assume for it any other obligation or liability for any loss 

or damage either direct, incidental or consequential resulting from or arising out of or in connection 

with any of its defective part(s). Nason will not be responsible for any labor or other charges in 

connection with the removal of a product deemed to be defective or for installation or replacement 

of a defective or repaired product. Buyer’s sole remedies are as provided herein. In no event shall 

Nason be liable for any cost of Buyer’s cover, or for any indirect, special, consequential, incidental, 

or punitive damages of any sort, whether based on tort or breach of contract and/or warranty. 

Request Nason’s catalog 

of custom engineered 

switches by calling toll 

free 800-229-4955 or 

visit our website at 

www.nasonptc.com 

NAS-CYL 6/10

Product Catalog - Nason

Create successful ePaper yourself

Delete template?

Save as template?