14.04.2015 Views

Ford Fusion 2008 - Pioneer Navigation System Supplement Printing 3 (pdf)

Ford Fusion 2008 - Pioneer Navigation System Supplement Printing 3 (pdf)

Ford Fusion 2008 - Pioneer Navigation System Supplement Printing 3 (pdf)

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Navigation System

if equipped


Table of Contents

Introduction 4

How to get going 5

Navigation system overview 10

Audio features 14

AM/FM 14

Satellite radio (if equipped) 16

CD 21

Auxiliary input jack (Line in) 23

User Device (if equipped) 23

DVD (if equipped) 23

Sound features 26

Speed compensated volume 28

Rear seat controls (if equipped) 28

System features 30

Hybrid information (if equipped) 30

Date/time settings 35

Security 38

Help 39

MAP DVD - Loading and unloading 41

Cleaning map DVDs 43

Navigation features 44

Map icons 47

Destination entry 49

Previous destination 51

Address Book - destination entry 53

Point of Interest (POI) 55

Intersection 60

Freeway entrance/exit 61

Destination way points 63

Map preferences 65

Address Book - editing 67

Quick POIs 69

Avoid areas 69

Voice recognition 71

1

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Table of Contents

Frequently asked questions 83

General Information 86

Navigation end user license agreement 86

Cleaning 90

Navigation glossary 90

SYNC (if equipped) 91

What is SYNC? 91

Safety information 92

Phone dependent features 92

SYNC voice recognition feature 93

Using voice commands with SYNC 94

Quick reference chart 98

SYNC phone features 99

Quickstart - How to get going 99

Pairing your phone through your navigation system 99

Making a call 100

SYNC phone features 102

Saving a contact or phone number as a Quick Dial 103

Using the quick dial feature 103

Replacing contacts in your Quick Dial locations 104

Accessing your phone book 104

Call history 105

System settings 106

Connecting a phone 106

Adding a phone 107

Deleting a phone 107

Advanced settings 108

Turning Bluetooth on/off 109

Setting a ring tone 110

Message notification 111

Automatically download your phone book 111

Modifying your phone book and call history 112

Turning prompts on/off 114

Returning to factory defaults 115

Performing a master reset 116

2

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Table of Contents

Installing new vehicle applications 117

Accessing SYNC system information 117

Text messaging with your navigation system 118

Forwarding a text message 123

Voice commands in phone mode 124

SYNC media features 125

How to get going with SYNC media 125

Connecting your digital media player to SYNC 125

SYNC media features 126

Using your USB port 127

Supported player, media formats and metadata information 129

What’s playing? 129

Streaming music from your phone 129

Using the Auxiliary input jack (Line in) 130

Using the play all feature 132

Selecting and playing specific artists 132

Selecting and playing specific albums 133

Selecting different genres 133

Accessing your playlists 134

Playing a specific track 134

Exploring the USB device 135

Accessing BT devices 136

Adding a new device in discovery or discoverable mode 137

Voice commands in media mode 138

SYNC End user license agreement 146

Glossary 153

Index 155

All rights reserved. Reproduction by any means, electronic or mechanical

including photocopying, recording or by any information storage and retrieval

system or translation in whole or part is not permitted without written

authorization from Ford Motor Company. Ford may change the contents without

notice and without incurring obligation.

Copyright © 2007 Ford Motor Company

3

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Introduction

NAVIGATION SYSTEM

Your vehicle is equipped with a navigation system which allows you to

listen to the radio, play CDs, and also navigate the vehicle using a

navigation map DVD.

Your system has a large range of features, yet is easy to use. Guidance is

shown on the display screen and is supplemented with voice prompts.

The display screen provides full information for operating the system

through the use of tabbed menus, text screens, and map displays. Screen

selections are made by touching the desired selection on the touch

screen.

4

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


DRIVING RESTRICTIONS

In order to prevent the navigation system from distracting the driver,

access to certain functions are restricted when the vehicle is traveling

above 5 mph (8 km/h). (For example, only QUICK DEST (Destination)

items are available for destination entry. Refer to Destination

Programming). When the vehicle is in motion, the following functions

are restricted:

• Scrolling of long lists

• Continuous scrolling of map

• Editing/Adding entries in the Address Book and Avoid Areas List

• DVD ROM Load and Eject

When the vehicle begins to move, and the Select Route Screen is shown,

the highlighted route is automatically selected and guidance begins.

When the vehicle speed is reduced to 5 mph (8 km/h) or less, system

restrictions are lifted and you have full access to the system.

QUICK START

Introduction

Driving while distracted can result in loss of vehicle control,

accident and injury. Ford strongly recommends that drivers use

extreme caution when using any device that may take their focus off

the road. The drivers primary responsibility is the safe operation of

their vehicle. Only use cell phones and other devices not essential to

the driving task when it is safe to do so.

5

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Introduction

TO PLAY A RADIO STATION

1. Ensure that the navigation system is on.

2. Press MEDIA.

3. Select AM, FM1 or FM2.

4. Press TUNE to adjust manually

up ( ) or down ( ) the

frequency band.

5. Press SEEK to find the next

strong station up ( ) or down

( ) the frequency band.

TO PLAY SATELLITE RADIO

(SR - IF EQUIPPED)

1. Ensure that the navigation system is on.

2. Press MEDIA.

3. If your vehicle is equipped with

Satellite Radio, the SR tab will be

present on the media screen. Select

the SR tab to enter Satellite Radio

mode (if equipped).

For further information on Satellite

Radio, refer to Satellite Radio in

the Audio Features chapter.

6

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Introduction

TO PLAY A PREVIOUSLY LOADED CD:

1. Ensure that the navigation system is on.

2. Press MEDIA.

3. Select the CD tab or press

MEDIA repeatedly until CD is

highlighted. Press the corresponding

memory preset (1–6) to select the

desired CD. The previously loaded

CD will begin to play. The system

will begin playing the discs in order.

Note: If there are no CDs loaded

into the system, NO DISC will display in the status bar and you will not

be able to highlight or select the CD tab.

4. Press SEEK to advance to the

next ( ) or previous ( ) tracks.

TO LOAD CDS:

1. Ensure that the navigation system is on.

2. Press LOAD.

3. When LOAD CD (#) appears on

the status bar, select the desired

slot by pressing the corresponding

memory preset (1–6.)

4. Insert the disc. The CD will begin to play.

USING THE AUXILIARY INPUT JACK:

Your vehicle is equipped with an

auxiliary input jack which allows a

portable audio device to be listened

to through your vehicle’s audio

system. To access the auxiliary

input jack mode:

1. Press the MEDIA hard button.

7

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Introduction

2. Select the LINE IN tab.

Once a 3.5 mm input jack is plugged into the Line In jack, sound from

the device will be emitted through the vehicle speakers.

For information on the auxiliary input jack location, please refer to

Auxiliary input jack in the Entertainment chapter in your Owner’s

Guide.

TO USE THE NAVIGATION SYSTEM:

1. Ensure that the vehicle ignition is on, and the navigation map DVD is

loaded into the navigation map DVD player. If the navigation map DVD is

not loaded, refer to Loading and ejecting navigation map DVDs in the

System Features chapter for loading instructions.

2. Press DEST.

3. Select the desired type of

destination entry: Quick Destination,

Previous Destination, Address Book,

POI, Address (shown), Map, Phone

Number, Intersection or Freeway

Entrance/Exit.

4. Enter the required information.

Please note that:

• The system uses a Smart Speller, which facilitates entering information

through the keyboard.

• Accented characters in English, Spanish and French will be converted

internally to non-accented characters for search purposes.

5. The screen will show the point

entered in a map. If this is the

intended destination, press SET AS

DESTINATION. COMPUTING

ROUTE will display while the

system is computing the route.

8

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Introduction

6. Select the desired route on the

right hand side of the screen. There

will be up to three routes possible

from which to choose, each

highlighted with a different color.

For each route, the overall distance,

route conditions and the estimated

travel time are displayed.

7. Press START ROUTE and follow the instructions.

VOICE RECOGNITION (IF EQUIPPED)

Your navigation system may be equipped with a voice activated feature

that allows you to “speak” certain commands to the system. For further

information, refer to Voice recognition in the Navigation chapter.

MENU TAB ARRANGEMENT

The ‘tabs’ that appear across the top

of the screen will vary depending on

your vehicle’s options. For example,

the ‘SR’ tab will appear if your

vehicle is equipped with Satellite

Radio. The FM tab also varies; and

will be represented as FM or FM1

and FM2 depending on your vehicle’s options.

9

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation system overview

FORD AND MERCURY SYSTEM

LINCOLN SYSTEM

10

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation system overview

Refer to the System Overview

graphics on the previous page.

1. Memory presets: To save a

station (AM/FM1/FM2) in radio mode, tune to the selection. Press and

hold the desired memory preset button (1–6). Press the memory preset

buttons (1-6) to access your preset stations. In CD mode, press the

memory preset buttons (1-6) to play the disc in the corresponding slot

location.

2. CD slot: To load a CD: Press LOAD and a specific memory preset to

load a CD to a specific slot. Once LOAD CD# appears in the display, the

CD door will open. Insert the CD label side up.

3. (Eject): Press the eject

button to eject a single disc. Press

and hold the button to eject all discs

present in the system. To eject a specific disc, press the eject control

and then press the corresponding memory preset button. If you do not

select a specific disc, the system will automatically eject the disc that is

currently playing.

4. LOAD: Press the load button to

load a single disc. Press and hold

the button to load discs in all empty

slot locations.

5. MAP: Press to access the

navigation map. Press while the map

display is active to re-center the

map on the current vehicle position. Press while the map display is

active and a route is active to step through the different map guidance

views.

6. DEST (Destination): Press to

access the navigation destination

entry menu. Press while in the

navigation destination entry menu to show additional destination entry

techniques.

7. NAV (Navigation): Press to

access the navigation menu. Press

while in the navigation menu to step

through the navigation menu tabs.

11

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation system overview

8. REPEAT: Press the repeat button

while navigation guidance is active

to repeat the last spoken navigation

guidance prompt.

9. TUNE: In radio mode, press

TUNE to manually advance

down or up the frequency band. In

MP3 mode, press TUNE to

advance to the previous/next folder.

Note: This feature requires a disc containing MP3 files organized in

multiple folders.

10. SEEK: In radio mode,

press SEEK / to seek to the

next/previous available station. In

CDX6 / DVD mode (if equipped),

press SEEK / to advance to the next/previous track.

11. MENU: Press to access the

system menu. Press while the

system menu is active to step

through the system menu tabs.

12. PHONE: Your vehicle may be

equipped with SYNC, a hands-free

communications and entertainment

system with special phone and

media features. For more information, please refer to the SYNC phone

features chapter.

13. SOUND: Press to access the

Sound menu. Press while in the

sound menu to step through the

sound menu tabs.

14. MEDIA: Press to access the

media menu. Press while in the

media menu to step through the

media menu tabs consisting of various sources.

12

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation system overview

15. On/Off/Volume: Press to turn

the audio system on/off. Press and

hold to turn the navigation radio

completely off. Turn to adjust the

volume of the audio system or the

navigation voice prompts as they are

being given.

Note: If a route is active when the navigation radio is turned off, the

route is resumed when the system is turned on again.

After the system initializes, the screen will be divided in two sections:

• Status bar: This is the top portion of screen that displays the clock

or date and useful information, depending on current mode.

• Display area: The interactive screen that is activated by finger touch

and changes depending on current system operation. Graphical

buttons are displayed in this area depending on the current screen for

the user to make choices.

13

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

THX AUDIO SYSTEM — IF EQUIPPED (LINCOLN VEHICLES ONLY)

Your vehicle may be equipped with

the THX certified premium audio

system. This system creates optimal

acoustic quality for all seating

positions and road conditions.

The system offers an advanced

speaker system, amplifier, subwoofer

and equalizer.

AM

1. Ensure that the navigation system is on.

2. Press MEDIA.

3. Select AM. Once in AM mode,

you may select between SHOW

OPTIONS and SHOW PRESETS.

4. Press SHOW OPTIONS to select

from:

• SCAN: Press for a brief sampling

of all listenable stations. Press

again to disable and remain on

the current selection.

• SCAN PRESETS: Press for a

brief sampling of all the stations

held in the memory presets.

• AUTOSET PRESETS: The autoset feature allows you to set strong

radio stations without losing your original preset stations. This feature

is helpful on trips when traveling between cities with different radio

stations.

To enable, select AUTOSET PRESETS and the six strongest stations

in your current area will be set as presets. To return to your original

presets, press AUTOSET PRESETS again and the feature will disable.

14

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

5. Press SHOW PRESETS to view

the preset stations. To set or change

a preset station, press and hold any

of the memory presets buttons

(1–6) or any of the soft key memory

preset buttons on the screen while

on the desired station. The new

station will replace the previous one

recorded.

FM

1. Ensure that the navigation system is on.

2. Press MEDIA.

3. Select FM1 or FM2. Once in FM

mode, you may select between

SHOW OPTIONS and SHOW PRESETS.

4. Press SHOW OPTIONS to select

from:

• SCAN: Press for a brief sampling of all listenable stations. Press again

to disable and remain on the current selection.

• SCAN PRESETS: Press for a brief sampling of all the stations held in

the memory presets.

• AUTOSET PRESETS: The autoset feature allows you to set strong

radio stations without losing your original preset stations. This feature

is helpful on trips when traveling between cities with different radio

stations.

To enable, select AUTOSET PRESETS and the six strongest stations

in your current area will be set as presets. To return to your original

presets, press AUTOSET PRESETS again and the feature will disable.

• RDS: This feature allows the radio system to receive text information

from RDS-equipped FM radio stations. In FM mode, press RDS to

activate/deactivate. RDS must be activated in order to access PTY and

SET PTY.

15

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

• PTY: This feature allows the user to search for Radio Data System

(RDS) stations selectively by their Program Type (PTY). To be able to

select this feature, RDS must be enabled. PTY and station call letters

will be displayed on the Status Bar.

• SET PTY: Press to select a program type, which, once selected, will

be displayed above the SET PTY button. Once PTY has been

programmed, press SEEK or SCAN to initiate a search up or down the

frequency. The search will stop when the desired program type has

been reached.

Note: The system will scan the frequency band three times for the

chosen program type. If the program type is unavailable in your

reception range, the system will return to the previous station.

5. Press SHOW PRESETS to view

the preset stations. To set or change

a preset station, press and hold any

of the presets while on the desired

station. The new station will replace

the previous one recorded.

SATELLITE RADIO (IF EQUIPPED)

Your vehicle may be equipped with Satellite Radio capability. Vehicles

that are equipped with a factory installed SIRIUS Satellite Radio system

include a limited subscription term which begins on the date of sale/

lease of the vehicle. Extended subscription terms are available, please

contact SIRIUS at 1–888–539–7474.

You will need to give SIRIUS your

Satellite Radio ESN Number for

activation. The ESN number is

found on the System Information

Screen in the lower left corner

(SR ESN:XXXXXXXXXXXX).

If the SYSTEM INFO screen is not

available, press MENU to access the

system information.

For further information on satellite subscription and service, refer to

Satellite radio information later in this chapter.

16

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

SATELLITE RADIO INTERACTION (IF EQUIPPED)

Once the Satellite Radio feature is activated, your navigation system will

have additional features.

Press SR to enter Satellite Radio Mode.

• SR123: You will be able to access

three different Satellite Radio

bands, SR1, SR2 and SR3. You

can save six presets on each

band, for a total of 18 presets.

• SCAN: Press to hear a brief

sampling of Satellite Radio

channels. Press again to stop.

When a scan is active, the system will only scan stations available in

the selected genre setting.

• SCAN PRESETS: Press to hear a brief sampling of all preset stations.

• TEXT: Press once to display artist and title information. Press again

to display album and genre information.

• KEYPAD: Press to display the numeric keypad (0–9). Use the keypad

to manually enter a desired channel. Press ENTER to confirm the

selection, or press BACK to delete the entered numbers.

• SHOW PRESETS/SHOW

OPTIONS: Press to toggle

between displays of the functional

buttons or presets at the bottom

of the screen.

• CHANNEL GUIDE: Press to

display the list of satellite radio

channels. Press the SKIP button

located next to the listed channel

in order to block that station

from being selected when tune,

seek or scan searches are active.

Note: You will not be able to scroll

through the channel guide when the vehicle is in motion.

17

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

• GENRE: Press to scroll through

a variety of different format

types.

• REAR ZONE: Press to

enable/disable the rear controls

(if equipped), turn the

headphones on/off and to select

from different media sources.

SATELLITE RADIO INFORMATION (IF EQUIPPED)

Satellite radio channels: SIRIUS broadcasts a variety of music, news,

sports, weather, traffic and entertainment satellite radio channels. For

more information and a complete list of SIRIUS satellite radio channels,

visit www.sirius.com in the United States, www.sirius-canada.ca in

Canada, or call SIRIUS at 1–888–539–7474.

Satellite radio reception factors: To receive the satellite signal, your

vehicle has been equipped with a satellite radio antenna located on the

roof of your vehicle. The vehicle roof provides the best location for an

unobstructed, open view of the sky, a requirement of a satellite radio

system. Like AM/FM, there are several factors that can affect satellite

radio reception performance:

• Antenna Obstructions: For optimal reception performance, keep the

antenna clear of snow and ice build-up and keep luggage and other

material as far away from the antenna as possible.

• Terrain: Hills, mountains, tall buildings, bridges, tunnels, freeway

overpasses, parking garages, dense tree foliage and thunderstorms can

interfere with your reception.

• Station overload: When you pass a ground based broadcast repeating

tower, a stronger signal may overtake a weaker one and result in an

audio mute.

Unlike AM/FM audible static, you will hear an audio mute when there is

a satellite radio signal interference. Your radio display may display NO

SIGNAL to indicate the interference.

18

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SIRIUS satellite radio service: SIRIUS Satellite Radio is a subscription

based satellite radio service that broadcasts music, sports, news and

entertainment programming. A service fee is required in order to receive

SIRIUS service. Vehicles that are equipped with a factory installed

SIRIUS Satellite Radio system include:

• Hardware and limited subscription term, which begins on the date of

sale or lease of the vehicle.

• Online media player providing access to all 65 SIRIUS music channels

over the internet (U.S. customers only).

For information on extended subscription terms, contact SIRIUS at

1–888–539–7474.

Note: SIRIUS reserves the unrestricted right to change, rearrange, add

or delete programming including canceling, moving or adding particular

channels, and its prices, at any time, with or without notice to you. Ford

Motor Company shall not be responsible for any such programming

changes.

Satellite Radio Electronic Serial Number (ESN): This 12 digit

Satellite Serial Number is needed to activate, modify or track your

satellite radio account. You will need this number when communicating

with SIRIUS. While in Satellite Radio mode, you can view this number by

pressing the MENU hard button and then selecting SYSTEM INFO. The

number will appear in the bottom left corner of the screen. For further

information, please refer to System information in the System features

chapter of this navigation supplement.

Radio Display Condition Action Required

ACQUIRING

Radio requires more No action required.

than two seconds to This message should

produce audio for the disappear shortly.

selected channel.

SAT FAULT

Internal module or

system failure

present.

Audio features

If this message does

not clear within a short

period of time, or with

an ignition key cycle,

your receiver may have

a fault. See your

authorized dealer for

service.

19

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

Radio Display Condition Action Required

INVALID CHNL Channel no longer

available.

This previously

available channel is no

longer available. Tune

to another channel. If

the channel was one of

your presets, you may

choose another channel

for that preset button.

UNSUBSCRIBED

NO TEXT

NO TEXT

NO TEXT

Subscription not

available for this

channel.

Artist information not

available.

Song title information

not available.

Category information

not available.

Contact SIRIUS at

1–888–539–7474 to

subscribe to the

channel, or tune to

another channel.

Artist information not

available at this time on

this channel. The

system is working

properly.

Song title information

not available at this

time on this channel.

The system is working

properly.

Category information

not available at this

time on this channel.

The system is working

properly.

20

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Radio Display Condition Action Required

NO SIGNAL

Loss of signal from

the SIRIUS satellite or

SIRIUS tower to the

vehicle antenna.

You are in a location

that is blocking the

SIRIUS signal (i.e.,

tunnel, under an

overpass, dense foliage,

etc). The system is

working properly. When

you move into an open

area, the signal should

return.

UPDATING

CALL SIRIUS

1–888–539–7474

CD

To load a CD:

1. Press LOAD.

Update of channel

programming in

progress.

Satellite service has

been deactivated by

SIRIUS Satellite

Radio.

Audio features

No action required. The

process may take up to

three minutes.

Call SIRIUS at

1–888–539–7474 to

re-activate or resolve

subscription issues.

Note: CD units are designed to play commercially pressed 4.75 in

(12 cm) audio compact discs only. Due to technical incompatibility,

certain recordable and re-recordable compact discs may not

function correctly when used in CD players. Irregular shaped

CDs, CDs with a scratch protection film attached, and CDs with

homemade paper (adhesive) labels should not be inserted into

the CD player. The label may peel and cause the CD to become

jammed. It is recommended that homemade CDs be identified

with permanent felt tip marker rather than adhesive labels.

Ballpoint pens may damage CDs. Please contact your authorized

dealer for further information.

2. Select the desired slot by

pressing the corresponding memory

preset button (1–6).

21

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

3. Insert the disc, label side up,

when LOAD CD# appears in the

status bar. The CD will begin to

play.

The following functions are available

in CD mode:

• SEEK: In CD or MP3 mode, press to listen to the next ( )or

previous ( ) track. In MP3 mode with FOLDER MODE selected,

press SEEK to advance to the first track in the same folder.

• TUNE: In MP3 mode, press to advance to the next ( ) or previous

( ) folder.

• (Reverse): Press to step back through current track.

• / (Play/Pause): Press to play or pause the current track.

• (Fast forward): Press to advance through the current track.

• SCAN: In CD mode, press to hear a brief sampling of all tracks on the

current CD. In MP3 mode, press for a brief sampling of all tracks in all

folders.

For an MP3 disc with multiple folders, pressing FOLDER MODE when

running a scan will result in brief sampling of all songs in the current

folder.

• COMP (Compression): Press to engage the compression feature.

COMPRESSION boosts more quiet music and lowers louder music to

minimize the need for volume adjustments. Press again to disengage.

• REPEAT: Press to repeat the current track. REPEAT will appear in

the Status Bar when selected. Press again to disengage.

• SHUFFLE: Press to engage the shuffle feature. When playing MP3

files, if FOLDER MODE is engaged, the system will shuffle the songs

within the current folder only; otherwise, it will shuffle all the tracks

in the disc. Press again to disengage.

• FOLDER MODE: Press to play only the tracks in the current folder,

when playing MP3 files arranged in separate folders.

• TEXT: When available, displays information from the CD.

22

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


AUXILIARY INPUT JACK (LINE IN)

Your vehicle is equipped with an

audio input jack which will allow a

portable audio device to be listened

to through your vehicle’s audio

system. To activate this feature and

access the LINE IN screen:

1. Press the MEDIA hard button.

2. Select the ’Line In’ tab.

Once a 3.5 mm input jack is plugged into the Line in jack, ensure that

the playing device is turned on with the volume set at the maximum

level. Press the play button and sound from the device will be emitted

through the vehicle speakers. Adjust the volume using the volume

control on the navigation system.

For information on the auxiliary input jack location, please refer to the

Auxiliary input jack in the Entertainment chapter of your Owner’s

Guide.

USER DEVICE

If your vehicle is equipped with

SYNC, there will be a USER

DEVICE tab in your media options.

For more information, please refer

to the SYNC media features

chapter later in this supplement.

Audio features

DVD (IF EQUIPPED)

Your vehicle may be equipped with a DVD player. The navigation system

can provide you interaction with the DVD system in the rear of the

vehicle. To access the DVD screen:

1. Ensure that the navigation system is ON.

23

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

2. Press MEDIA.

3. If your vehicle is equipped with a

DVD player, DVD will appear as a

tab selection in the media screen.

The DVD screen will allow you to

select from the following options:

• (Reverse): Press for reverse play.

• / (Play/Pause): Press to play or pause the DVD.

• (Fast forward): Press for advance play.

• REAR AUX : Press to access rear auxiliary mode. There is an

external video/audio input for the rear seat passengers to connect to

an external DVD player, video games, etc.

• REAR ZONE: Press to access the Rear Zone Entertainment Screen.

This screen allows back seat passengers to select/listen to a different

audio/video source than the front seat passengers. The only restriction

being the front and back seat passengers cannot both listen to a

different frequency band (AM/FM1/FM2).

SEEK: You may press SEEK on the bezel for the next ( ) or previous

( ) chapter.

24

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

4. The screen will show you the

selected playing media of the

different headsets (A and B). To

make adjustments, ensure that the

correct headset (A or B) is

highlighted. The appropriate

controls will appear to allow you to

make adjustments to your current

playing media.

• MEDIA: Press to select the desired media in the selected headset (A

or B).

• FULL ENABLED: When active, rear seat passengers can select any

audio/video source for the A headset (B headset can only choose from

DVD and DVD AUX). If the front seat passengers are listening to the

radio, the rear seat passengers can also select to listen to the radio

and will have control to change the radio station or Satellite Radio

channel.

• REAR ONLY: When active, rear seat passengers can select any

audio/video source for the A headset (B headset can only choose from

DVD and DVD AUX). If the front seat passengers are listening to the

radio, the rear seat passengers can also select to listen to the radio

but will not have control to change the radio station or Satellite Radio

channel.

• DISABLED: When active, all features for the rear seat passengers are

disabled. REAR ZONE OFF will be displayed in front of the A and B

buttons. The audio selection of the front seat will play through all

speakers. At any time the rear seat passengers can turn on the Family

Entertainment System (FES), if equipped, through the DVD player. At

that point, the navigation system will automatically display REAR

ZONE ENTERTAINMENT and enable the headsets. The primary

selection for the front seat will change to DVD.

• HEADPHONES ON/OFF: Press to turn the headphones on/off.

25

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

SOUND FEATURES

The sound menu allows you to access settings such as Bass, Treble,

Fade, Balance, Digital Signal Processing (DSP) and Speed Compensated

Volume (SCV).

1. To access the sound features, press SOUND. The sound screen will

appear.

2. Press the appropriate tab to select from:

BASS/TREBLE: Press + to increase

or — to decrease the level of

bass/treble.

26

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

BALANCE/FADE: Press /

to adjust the sound between the left

and right speakers (Balance)

and / to adjust the sound to

the front and rear speakers (Fade).

DSP (Digital Signal Processing):

Press to optimize the sound quality

for ALL SEATS, DRIVER, REAR or

CONVERTIBLE (if equipped). If

THX equipped, optimization is

available for ALL SEATS, DRIVER

or FRONT.

SCV (Speed Compensated Volume):

Radio volume changes automatically

with vehicle speed to compensate

for road and wind noise. You may

turn the feature on/off, and select a

level of compensation between 1

and 7 by pressing the corresponding

button.

DEFAULT SETTING: Press to clear out any current settings and return

the system to the default settings.

Note: Please refer to your Owner’s Guide for further information.

27

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

REAR SEAT CONTROLS (IF EQUIPPED)

If you have an Expedition or a Navigator, your vehicle is equipped

with Rear Seat Controls. To access the Rear Zone screen through your

Navigation system:

1. Ensure that the navigation system is ON.

2. Press MEDIA.

3. Press REAR ZONE on the AM,

FM, CD or SR media screens.

28

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Audio features

4. The screen will show you the

selected playing media. The

appropriate controls will appear to

allow you to make adjustments to

your current playing media.

• HEADPHONES ON/OFF: Press

to turn the headphones on/off.

• REAR ZONE: Press to turn the

Rear Zone off.

• MEDIA: If the headphones are ON, press the media button to select

between Radio and Rear AUX.

• FULL ENABLED: When active, rear seat passengers can select any

audio/video source. If the front seat passengers are listening to the

radio, the rear seat passengers can also select to listen to the radio

and will have control to change the radio station or Satellite Radio

channel.

• REAR ONLY: When active, rear seat passengers can select any

audio/video source. If the front seat passengers are listening to the

radio, the rear seat passengers can also select to listen to the radio

but will not have control to change the radio station or Satellite Radio

channel.

• DISABLED: When active, all features for the rear seat passengers are

disabled. REAR ZONE OFF will be displayed. The audio selection of

the front seat will play through all speakers. At any time the rear seat

passengers can turn on the Family Entertainment System (FES), if

equipped, through the DVD player. At that point, the navigation

system will automatically display REAR ZONE ENTERTAINMENT and

enable the headsets. The primary selection for the front seat will

change to DVD.

For more information, please refer to Rear seat controls in the

Entertainment Chapter of your Owner’s Guide.

29

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

HYBRID INFORMATION (IF EQUIPPED)

If you have a Hybrid vehicle, your navigation system has special Hybrid

screens which relay Energy Flow and Fuel Economy information. To

access these screens, press MENU and then select the HEV tab.

ENERGY FLOW SCREEN

The Energy flow screen shows a graphical representation of how power

is transferred in the Hybrid system to accelerate the vehicle or recharge

the battery, and also which mode is currently active. These screens are

informational and do not require any input from you.

Note: Due to the screen updates and simplification of the graphics, the

display may not show the actual vehicle status.

1. Engine Power: This line represents how much power is being

provided to the wheels by the engine. The arrow will always flow in one

direction and point to the wheels.

2. Engine: This icon represents the Internal Combustion Engine (ICE).

It will be highlighted in orange only when the ICE is running.

3. Generator Power: This line represents how much power is being

generated by the engine for use by the High Voltage (HV) electric

system, or how much power is being used by the High Voltage (HV)

electric system to control/start the engine.

4. High Voltage (HV) Battery: This icon represents your High Voltage

Battery. The fill level (shown in green), represents the state of charge of

your HV

30

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

5. Battery Power: This line represents how much power the HV battery

is providing to accelerate the vehicle (discharging), or how much power

is being delivered back through the motor to the battery charging.

6. Electric motor: This icon represents the Hybrid Electric Motor. This

symbol will be highlighted in orange after the vehicle has been started

and will remain highlighted until key off to indicate that the vehicle is

ready to be driven.

7. Motor power: This line represents the Hybrid Electric Motor. This

symbol will be highlighted in orange after the vehicle has been started

and will remain highlighted until key off to indicate that the vehicle is

ready to be driven.

Note: The power arrows may point in different directions, indicating

which way the power is flowing. The arrows may also vary in width to

indicate the different levels of power being provided to that component.

The energy flow screens contain a title to indicate which mode is active

within the Hybrid system.

In Hybrid Drive mode, the vehicle

is being powered by both the

electric motor and the engine.

In Charging HV Battery mode, the

vehicle is slowing down and power

is being stored in the high voltage

(HV) battery by the Hybrid system.

In Idle with Charging mode, the

vehicle is in a state similar to idle,

except that power is being

generated to recharge the high

voltage battery.

31

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

In Engine Drive mode, the vehicle

is being powered by the engine, not

the electric motor. This occurs at

higher speeds.

In Idle mode, the vehicle is either

at rest, or is sharing very little

power between the Hybrid parts.

This can occur at higher speeds if

the vehicle is not speeding up or

slowing down.

In Electric Drive mode, the vehicle

is driving in electric mode. The

power is coming from the electric

motor and not the engine.

32

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

FUEL ECONOMY SCREEN

The fuel economy screen displays

instantaneous fuel consumption,

overall average fuel economy and

also a graph of fuel economy

achieved in the last minute of

driving. To view this screen, press

SHOW FUEL ECONOMY on the

HEV tab screen.

• Instantaneous Fuel Consumption (Inst Cons): This is displayed

on the vertical bar on the left of the screen ranging from 0–60 mpg.

Your vehicle must be moving to calculate instantaneous fuel

consumption. When the vehicle is not moving, the Ins Cons function

will display no bar on the Inst Cons graph indicating 0 mpg.

Conversely, if you are driving in electric mode (Engine off), this

function will display 60 mpg. Instantaneous Consumption cannot be

reset.

• Overall Average Fuel Economy (AVG MPG): The AVG MPG is

displayed on the upper left hand corner of the screen. The AVG MPG

will be retained when the key is turned OFF and will continue

averaging when driving resumes. Pressing RESET will reset the AVG

MPG to zero.

• One minute average graph: The graph is updated each minute with

the fuel economy that was achieved during the prior minute of driving.

Each new one minute average will be added to the left side of the

graph, shifting the past data to the right. When the graph area is full,

the right most point will be deleted, keeping a running scroll from left

to right of the last 15 minutes of driving. The graph is intended to

provide a graphical representation of how driving habits/conditions can

affect fuel economy. Note that the graph will be cleared anytime the

key is turned out of RUN (however, the overall average fuel economy

will retain its value). Press RESET to clear the graph.

If the Navigation system has been set to units of Kilometer, the Fuel

Economy screen will display the equivalent Consumption Graph in units

of L/1000 KM. In Consumption (L/1000 KM) mode, the IFE function will

display MAX until the vehicle is moving. For more information on

Average Fuel Economy, refer to Message center in the Driver Controls

chapter in your Owner’s Guide.

33

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

DISPLAY

To access the display settings:

1. Ensure that the navigation system is ON.

2. Press MENU. The Menu screen will display.

3. Press DISPLAY. You may then select from the following options:

• AUTO DIM: Select to automatically dim the display brightness with

the vehicle backlighting (when headlights are turned on). Otherwise,

display brightness can be manually adjusted.

• STATUS BAR: Press to display only the Status Bar until the screen is

touched again. Refer to Status Bar Description in Basic Operation.

• DISPLAY OFF: Press to turn off the entire screen. Press the screen

or any hard button to turn the display on again.

• AUTO: Press to set the display to automatic mode. When headlights

are turned on, the system will automatically switch to the night

display screen. To adjust brightness or contrast, press + or — .

• DAY: Press to select the day screen. To adjust brightness or contrast,

press + or — .

• NIGHT: Press to select the night screen display. To adjust brightness

or contrast, press + or — .

• DEFAULT SETTING: Press to clear any current settings and return

to the system default.

34

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


• SAMPLE MAP: Shows you how the map will appear with the current

settings

DATE/TIME

To access the date/time settings:

1. Ensure that the navigation system is ON.

System features

2. Press MENU. The Menu screen will display.

3. Press DATE / TIME. You may then select from the following options:

SHOW CLOCK / SHOW CALENDAR: Press to toggle between CLOCK

and CALENDAR screens. Under the CLOCK screen, the following

buttons will be available:

• CLOCK ON/OFF : Press ON to enable the clock display in the status

bar. Press OFF to disable the clock display in the status bar.

• TIME SET BUTTONS: Press + or – to adjust the hours and minutes.

• 24 HOUR FORMAT: If enabled, the system will display military time.

If disabled, the user must select AM or PM.

• DEFAULT SETTING: Press to clear current settings and return to

system default settings.

35

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

• SHOW CALENDAR: Press to display the calendar screen.

The calendar screen will display the

current month. Press PREV to view

the previous month or NEXT to

view the next month. Under the

CALENDAR screen, the following

buttons are available:

• GO TO TODAY: Press to highlight the current date.

• SHOW CLOCK: Press to return to the clock screen.

FEEDBACK

To access the feedback screen:

1. Ensure that the navigation system is ON.

2. Press MENU. The Menu screen will display.

3. Press FEEDBACK. The feedback screen will appear. In this screen you

have the following options:

FEEDBACK: One must be selected at all times:

• ALL BUTTONS: Press to hear an audible beep every time any button

on the system is pressed.

36

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

• TOUCH SCREEN: Press to hear an audible beep when any touch

screen button is pressed.

• NONE: Press to turn off all audible beeps. You may press any button

and no beeps will be heard.

LANGUAGE: One must be selected at all times:

• ENGLISH: Press to set the system language to English.

• ESPANOL: Press to set the system language to North American

Spanish.

• FRANCAIS: Press to set the system language to North American

French.

Note: The system will automatically restart after a new language is

chosen.

VOICE VOLUME: Press +/- to select voice prompt volume level (1–34).

You may also turn the volume control during a voice prompt to adjust

the volume level.

TEST: Press to hear an audio sample of voice prompt at the currently

selected volume.

NAVIGATION GUIDANCE: Press ON to hear navigation guidance voice

prompts. Press OFF to turn the voice prompts off.

DEFAULT SETTING: Press to clear any current settings and return to

the system default settings.

37

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

SECURITY

Your navigation system has a special security feature which allows you to

enable the valet mode. In valet mode, if your vehicle is being parked by a

valet, they will be unable to access any of the navigational information

(addresses, destinations, etc.), change any settings or eject any CDs or

the navigation DVD. To access and enable valet mode:

1. Ensure that the navigation system is on.

2. Press MENU.

3. Press SECURITY.

4. Press ENABLE VALET MODE to lock the system using any 4-digit PIN

(Personal Identification Number). When valet mode is activated, the

system will be completely locked. The PIN must be entered in order to

disable Valet Mode and unlock the system. You can select a different PIN

every time the system needs to be locked. If the PIN is forgotten, you

can disable Valet Mode by disconnecting the battery or removing the

appropriate fuse for one minute to reset the system.

38

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

HELP

Your system has a special help feature. To access the help feature:

1. Ensure that the system is on.

2. Press MENU.

3. Press HELP. You may then select from:

• BASIC OPERATION: This screen will provide basic help with the

hard buttons on the system, providing a brief description for each

button.

• DRIVING RESTRICTIONS: This screen will inform you that due to

driver distraction and safety concerns, certain features will be

restricted when the vehicle is in motion.

• NAVIGATION DVD INFORMATION: Press to access information on

the navigation map DVD — basic operation , how to access the DVD,

and also replacement and contact information for the Customer

Relationship Center.

39

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

SYSTEM INFORMATION

The system information screen gives you contact information, current

location and access to the Navigation DVD. To access the System

Information screen:

1. Ensure that the system is on.

2. Press MENU.

3. Press SYSTEM INFO to view the following information:

• Customer Relationship Center (shown as Customer Service Center)

phone numbers in USA and Canada

• Current GPS Location

• Map DVD Release Version

• ACCESS NAVIGATION DVD: Press to access the Navigation Map DVD

from this screen.

• Satellite Radio Electronic Serial Number (ESN#)

40

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


LOADING AND EJECTING NAVIGATION MAP DVDS

1. Ensure that the system is on.

System features

2. Press MENU.

3. Press SYSTEM INFO.

4. Press ACCESS NAVIGATION

DVD. The following disclaimer will

appear:

“To access the navigation DVD,

select the OPEN button. This will

cause the display to open. If the

navigation DVD is installed, it will

be ejected automatically. The screen

will close automatically when a disc

is inserted, or if no activity is

detected for 5 minutes.”

41

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

5. Press OPEN. The navigation screen will fold down, allowing you to

access the navigation DVD slot. Insert the DVD with the printed side up

into the lowest slot. If you do not wish to change the DVD, simply

reinsert the DVD and the system will close automatically. Do not allow

moisture or foreign objects to enter the slot. The system then will check

the disc inserted. If valid, it will install the software and restart the

system.

If you do not wish to access the DVD, press CANCEL.

LATEST MAP DVDS

The map content is constantly changing due to new roads, traffic,

restrictions, etc. Therefore, it is not always possible to exactly match the

DVD map with the current roadways. For best results, always use the

latest version of the map DVD. Map information is regularly updated, but

all areas are not necessarily covered to the same level of detail. Some

areas, in particular private roads, may not be included on the MAP DVD.

To help with accuracy, always use the latest DVD version for navigation.

Updates to the database will have no effect on the contents of the

address book and other user settings. Loading an older version of the

map DVD may result in data loss.

42

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


System features

CLEANING MAP DVDS

Note: Ensure that you handle the high density digital map DVD with

care and by the edges only. Fingerprints, smudges and scratches on the

disc can affect Navigation System performance.

1. Ensure that you use a soft, non-abrasive, lint-free cloth.

2. DO NOT clean the disc in a circular motion as this may harm the pits

on the surface of the disc.

3. In order to minimize any scratching, wipe the disc with the cloth from

the inner hub to the outside of the disc.

4. DO NOT use any type of liquid cleaning solutions on the discs.

ORDERING ADDITIONAL MAP DVDS

If you wish to order a replacement map, an additional map, or an

updated DVD, in the United States, please contact:

Ford Customer Relationship Center at 1 (800) 392–3673 (FORD)

• Lincoln Mercury Customer Service Center at 1 (800) 521–4140

In Canada, please contact:

Ford Customer Relationship Centre at 1 (800) 565–3673 (FORD)

• Lincoln Customer Service Centre at 1 (800) 387–9333

43

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

DISCLAIMER

After each ignition cycle, a

disclaimer display will appear. Press

AGREE to the content of the screen

in order to access the navigation

functions. If you do not press

AGREE, you will only have access to

non-navigation functions.

MAP MODE

To enter map mode:

1. Ensure that the system is on.

2. Press MAP. The map screen will display.

44

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

When in MAP mode, an icon appears on the upper left side of the

screen; this is a toggle button to change the view of the map displayed.

The following methods exist for orientation of the map:

• Heading up: In this mode, the

direction of forward travel is

always upward direction on

screen. Available for map scales

up to 2.5 mi/5km. For scales above that, the setting for Heading-Up is

remembered, but the map is shown in North-Up only. If the scale

returns below this level, then the Heading-Up setting is restored.

• North up: In this mode, the

Northern Direction is always

upward direction on screen.

MAP SCALE

The map display scale on the map

has 16 levels, ranging from 0.02

miles to 1000 miles. In MAP mode,

you can also zoom in or out,

changing the display scale by

pressing on one of the arrows on the button appearing on the left side of

the screen. When in Full Screen Map Mode, touching this button will

cause the Zoom Direct buttons to appear. The Zoom Direct buttons

represent the most common scales and can be pressed directly to show

the map at the desired scale.

Map road colors and building representation on the map:

• Roads: Will be displayed in a variety of colors. Specifically, pink roads

are not able to be used as routes. Also, purple roads indicate roads

under construction currently or at the time of disc compilation. These

roads will be open in the future.

• Building footprints: Will display areas of major buildings in the

20 largest cities in the U.S. These areas will be displayed depending

on their size and the map zoom level.

45

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

QUICK TOUCH BUTTONS

When in Map mode, you have the

ability to view six quick touch

buttons. In order to view these,

press and release anywhere on the

map display. The map position will

not change and they will appear on

the map. These buttons are:

• TIME TO DESTINATION: Displays the distance and estimated

travel time to the selected destination on the left side of the screen.

When selected, a popup screen will also display the Estimated Time of

Arrival (ETA).

• CURRENT POSITION: Press to show the vehicle’s current location

(street and State/Province).

• SET AS DEST: Press in order to select a scrolled location on the map

as your destination. (You may scroll the map by pressing your index

finger on the map display. When you reach the desired location,

simply let go and then press SET AS DEST to go to the Destination

Map View Screen.

• POI/POI OFF: Allows you to select from various Point of Interest

(POI) icons as well as turn them on/off in the map display. Only one

kind of POI will display on the map at a time (i.e., restaurants, banks,

etc). The selected PIO icon will show on the button.

Note: This is only possible for scales equal or smaller than 0.75 mi /1

km.

If a navigational route is in progress, the following buttons will also

appear at the bottom of the screen when a route exists:

• VIEW ROUTE: Press to adjust the map display to the right scale.

This scale allows the entire route to be visible in the screen. This

screen will also display the following options:

VIEW DEST: Press to shift the destination to the center of the map

display.

TURN LIST: Press to view a list of the roads and waypoints for the

planned route. You can change the route by selecting to AVOID any of

the roads or to DELETE any of the waypoints. At this point the system

will refigure the planned route based on the criteria.

46

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


• EDIT ROUTE: Press in order to adjust the following features of the

current route:

DETOUR: Press to select a portion of the route for the navigation

system to avoid. Select the desired distance (between one and 100

miles) of the current road. A map for each alternative route will display

on the screen. Select the desired route.

EDIT TURN LIST: Press to display the TURN LIST screen and make

any desired adjustments. Refer to Turn list.

EDIT ROUTE PREFERENCES: Press in order to change settings for

route searches. Refer to Route preferences.

EDIT DESTINATION/WAYPOINTS: Press in order to add, delete or

adjust any waypoints or your destination. Refer to

Destination/Waypoints list.

• CANCEL ROUTE: Press to delete the next waypoint or the whole

current route. The route cannot be deleted while a reroute is in

progress.

Note: Once deleted, you will not be able to restore the waypoint or

route.

MAP SCROLLING

Single scroll: In single scroll mode, press and release on the map

display will bring the pressed position to the center of the screen. The

scroll mode will time out after five minutes of inactivity.

Continuous scroll: During scroll mode, press and hold to begin

scrolling continuously in one of eight directions closest to the point that

is pressed. The scroll will continue until the map is released, and will

increase in speed after three seconds. This is not possible if the vehicle

is moving. The scroll mode will time out after five minutes of inactivity.

MAP ICON DESCRIPTIONS

• Vehicle mark: This icon is shown

in scroll mode also. The ring

around the vehicle mark will

flash. The vehicle mark is shown

in the center of the map display,

except when in scroll mode.

Navigation features

47

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

• Scroll cursor: This icon is fixed

in the center of the screen. The

map position closest to the cursor

is in a window on the top center

part of the screen.

• Address book entry default

icon: This icon indicates the

location on the map of an address

book entry. This is the default

symbol shown after the entry has

been stored to the Address Book by any method other than the map.

A different icon can be selected from the 12 icons available; each icon

can be used more than once. Refer to Address book.

• Home: This icon indicates the

location on the map currently

stored as the home position. Only

one entry from the Address Book

can be saved as Home. This icon cannot be changed.

• POI (Point Of Interest) icon:

Icons such as this can be

displayed on the map and can be

turned on or off. There are about

56 subcategories of POIs that can

be selected to be displayed on the map one at a time.

• Waypoints: This icon indicates

the location of a waypoint on the

map. The number inside the

circle is different for each

waypoint and represents the position of the waypoint in the route list.

• Destination symbol: This icon

indicates the location of the final

destination on the map.

• Next maneuver point: This icon

shows the location where the

next turn should occur on the

planned route. You may be able

to see up to the next three turns.

48

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


• No GPS symbol: This icon

Indicates that insufficient GPS

satellite signals are being received

for accurate map positioning. The

symbol may be intermittently

displayed under normal operation in an area with poor GPS access.

Refer to Limited GPS reception in General Information.

DESTINATION PROGRAMMING

Press DEST to set a destination.

There are nine ways to program a

destination. Most of these will be

restricted when the vehicle is in

motion. One tab for each method

will appear on the screen when

DEST is pressed. An additional tab

with the symbol → or ← will be

displayed for additional methods. When entering a destination, the

system uses a Smart Speller, which facilitates entering information

through the keyboard.

Note: The system will not calculate a route to a destination that is

located on the same block as the vehicle’s current location.

QUICK DESTINATION

Press the Quick Destination tab to

view the possible destination

choices when the vehicle is in

motion.

Navigation features

• EMERGENCY: There are two

categories of Hospital and Police

that can be selected under the

Emergency category. They can be

searched for in order of their

distance from the vehicle’s

current location. The maximum

length for the search result will

be 25 items.

49

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

• FIND NEAREST POI: You can

select five POI categories at a

time. Of these five possible, you

can search for one at a time in

the vicinity of the vehicle

position. The defaults for these

five categories are shown in the

graphic, and can be changed.

Refer to Quick POIs.

The search criteria for Find Nearest POI searches varies by specific

category and current road type. The search distance range is 10–80 mi

(16–128 km).

Once one of these categories is selected, a list of matches will be shown

in order of distance from the current location.

LIST ALL CATEGORIES: When

selected, a list of categories will be

shown. When one is selected, a list

of subcategories will appear. After

selecting a subcategory, a search

will show a list with name and

distance to each POI from the

vehicle position. Once a location is

selected, the system will display the Destination map screen for

confirmation.

• DESTINATION PRESETS: Displays the home location and five

entries selected from the Address Book. The icon and the name

associated with the location will appear. Refer to Address Book.

When a route has been initiated, the following buttons become available

under the QUICK DEST tab:

• EDIT/DETOUR ROUTE: Gives

you the following options to

change features of the current

route:

DETOUR: Press to select a portion of the route for the navigation

system to avoid. Select the desired distance (between one and 100

miles) of the detour. A map for each alternative route will display on the

screen. Select the desired route.

50

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

EDIT TURN LIST: Press to display the TURN LIST screen and make

any desired adjustments. Refer to Turn list.

EDIT ROUTE PREFERENCES: Press in order to change settings for

route searches. Refer to Route preferences.

EDIT DESTINATION/WAYPOINTS: Press in order to add, delete or

adjust any waypoints or your destination. Refer to

Destination/Waypoints list.

• CANCEL ROUTE: Press to delete the next waypoint or the whole

current route. The route can be deleted while a reroute is in progress.

PREVIOUS DESTINATION

Your navigation system will allow you to select from a list of the 20 most

recent destinations and waypoints. Once the list is full, any newly added

items overwrite the oldest ones on the list. To access your previous

destinations/waypoints:

1. Press DEST.

51

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

2. Select PREVIOUS DESTINATION.

3. You may now scroll through the

list of previous destinations using

the / soft keys. Once you

have made your destination

selection, you can now choose from:

• SET AS DEST: Press for the

Destination Map screen to appear.

You can then decide if you would

like to set the desired selection as a waypoint or final destination.

• DELETE: Press to delete the desired selection.

• DELETE ALL: Press to delete all entries.

52

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

ADDRESS BOOK — DESTINATION ENTRY

The address book feature of your system allows you to view a list of

address book entries previously saved. To access:

1. Press DEST.

2. Select ADDRESS BOOK.

53

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

3. You may now choose to sort the

list of entries by:

• A–Z:Select to view list in

alphabetical order

• DATE: Select to view list in order

of the entry date.

• ICON: Select to sort on the icon

type.

• INFO: When the vehicle is stationary, you may select this in order to

view the following information about the current address book entry:

NAME

LOCATION

POINT OF INTEREST (POI) PHONE NUMBER

ICON

QUICK DEST / DESTINATION PRESET NUMBER

• SET AS DEST: Press to set the current address book entry as your

destination. The Destination Map screen will then appear. Refer to

Destination map for further information.

Note: If the battery is disconnected, the address book information will

be saved but the previous destinations will be deleted.

To edit address book entries, press the NAV hard control and select

the ’Address Book’ tab. For a complete description, refer to Address

book — editing later in this section.

54

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

POINT OF INTEREST (POI)

To access Points of Interest:

1. Press DEST.

2. Select POINT OF INTEREST

(POI).

55

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

3. POI listings can be sorted

alphabetically or in the order of the

distance from the vehicle position.

Detailed information on POIs

(Name, City name, Street name,

House number, Telephone number)

can also be displayed.

• STATE/PROV: Press to set the

State, Province or Territory using the keyboard or select from List.

The preset value for this field is based on current position (Auto Fill

On) or previous selection (Auto Fill Off), depending on the settings.

USA: Select any state (except Alaska), including Puerto Rico and the

District of Columbia.

CANADA: Select any province or territory.

• CITY: Input city name for desired location.

• CATEGORY: POIs can be searched by category and sub-category.

• NAME: When searching for a POI by name, the search can be done

for a full or partial match.

• LIST: State/Provinces/Territories, Cities, and Names can be selected

from a list determined by the Smart Speller.

56

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

ADDRESS

1. Press DEST.

2. Select ADDRESS.

57

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

3. Enter the following information:

• STATE/PROV: Press to set the

State, Province or Territory using

the keyboard or select from List.

The preset value for this field is

based on current position (Auto

Fill On) or previous selection

(Auto Fill Off), depending on the

settings.

USA: Select any state (except Alaska), including Puerto Rico and the

District of Columbia.

CANADA: Select any province or territory.

• CITY: Input city name for desired location.

• STREET: Streets which include numbers in their name can be

searched if the name is input using digits or a spelling of the number.

This applies to street names containing whole numbers from 1 (one)

to 20 (twenty) or 1st (first) to 20th (twentieth) only.

• NUMBER: After the street has been input, the Smart Speller will

allow the user to enter a house number in the range of the area

specified.

• LIST: State/Province, City, Street can be selected from a list

determined by the Smart Speller.

58

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

POI PHONE NUMBER

The system will allow you to search for an address book entry or POI

using the phone number.

1. Press DEST.

2. Select PHONE NUMBER.

3. Use the key pad to enter the

desired phone number. Press

ENTER. A list of possible matches

will appear. Select the correct one.

You can then set that location as

your destination. If the phone

number matches one of the saved

destinations, the destination map

will appear showing the location.

59

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

INTERSECTION

To set an intersection as a destination:

1. Press DEST.

2. Select INTERSECTION to

program a destination to a major

intersection.

3. Under STREET #1, use the

keypad to type in the name of the

first street. The streets that

intersect with your STREET #1 will

appear in a list. Select the desired

street (STREET #2) from the list.

The list can be sorted alphabetically,

or in the order of distance from the

current position. After entering the desired intersection, select the city

from the list. The Destination Map will appear.

60

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


• STATE/PROV: Press to set the State, Province or Territory using the

keyboard or select from List . The preset value for this field is based

on current position (Auto Fill On) or previous selection (Auto Fill

Off), depending on the settings.

USA: Select any state including District of Columbia and the U.S.

territories of Puerto Rico and U.S. Virgin Islands.

CANADA: Select any province or territory.

• CITY: Input city name for desired location.

• STREET#1: Streets which include numbers in their name can be

searched if the name is input using digits or a spelling of the number.

This applies to street names containing whole numbers from 1 (one)

to 20 (twenty) or 1st (first) to 20th (twentieth) only.

• STREET#2: Enter a valid name for the intersecting street, or select

from a list.

• LIST: State/Provinces/Territories, Cities, and Names can be selected

from a list determined by the Smart Speller.

FREEWAY ENTRANCE/EXIT

To set a freeway entrance or exit as a destination:

Navigation features

1. Press DEST.

61

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

2. Select FREEWAY

ENTRANCE/EXIT.

The system will allow you to input a Freeway name, and an entrance or

exit to that freeway. The entrance/exit list can be sorted alphabetically or

by distance from the vehicle position. After selecting the desired

intersection, the Destination Map will appear.

• STATE/PROV: Press to set the State, Province or Territory using the

keyboard or select from List. The preset value for this field is based

on current position (Auto Fill On) or previous selection (Auto Fill

Off), depending on the settings.

USA: Select any state (except Alaska), including Puerto Rico and the

District of Colombia.

CANADA: Select any province or territory.

• FREEWAY: The Smart Speller will facilitate the entry of a valid

freeway in the area specified.

• LIST: State/Provinces/Territories, Cities, and Names can be selected

from a list determined by the Smart Speller.

DESTINATION MAP

After the destination type has been

selected, and the necessary

information is entered, the desired

location will be shown on the

destination map. You can then plan

a route or save the location by using

one of the buttons at the bottom of

the screen:

• SET AS DESTINATION: Select for the system to calculate your

selected destination immediately. The SELECT ROUTE screen will

then display. Refer to Select route.

• SET AS WAYPOINT: Select for the desired location to be stored as a

waypoint. The DESTINATION/WAYPOINT LIST will then display. Refer

to Destination/Waypoint list.

62

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

• SAVE TO ADDRESS BOOK: Select for the system to store desired

location in the address book.

• EDIT ROUTE PREFERENCES: Select to set or change the

preferences for the selected route. Refer to Route preferences.

DESTINATION/WAYPOINTS LIST

After you have selected a location,

you can set that location as a

waypoint by pressing the SET AS

WAYPOINT while in the

DESTINATION MAP screen. If a

route is already active, press DEST

and select the QUICK DEST tab, or

press EDIT

DESTINATION/WAYPOINTS directly from the map. The

Destination/Waypoint List screen will appear, showing a list of the final

destination and up to five waypoints. From this screen, you can select:

• OPTIMIZE: This appears on screen when multiple waypoints have

been listed. Press in order to find the first closest waypoint and then

the next closest waypoint.

• CHANGE ORDER: This appears after one waypoint has been

selected. Press to manually arrange waypoints moving them one space

up or down at a time in the list. You can also move the destination to

a waypoint, making the last waypoint the new destination.

• ADD ANOTHER: This selection allows you to search and add one

more waypoint or destination to the list. This becomes disabled once

there are five waypoints and one destination programmed.

• DELETE: Press to delete the selected waypoint from the list.

• DELETE ALL: Press to delete all the listed items.

• COMPUTE ROUTE: Press for the system to begin calculating the

selected destination and waypoints.

Note: You can select waypoints before a destination is selected. If a

waypoint is deleted while a route is active, the route is recalculated from

the current position to the following waypoint or destination.

63

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SELECT ROUTE SCREEN

The Select route screen will appear

after COMPUTE ROUTE is selected

from the

DESTINATION/WAYPOINTS LIST

screen or the SET AS

DESTINATION from the

DESTINATION MAP screen. You can

then select from any of the

following options:

• ROUTE PREFS: Press to change settings for route searches. Refer to

Route preferences.

• START ROUTE: Press to begin guidance for the selected route. All

other calculated routes will be deleted.

• CANCEL ROUTE: Press to delete the current route (which you will

not be able to retrieve.)

The system will display all computed routes, and the preferred route will

be highlighted. A route information box will appear on the right hand

side of the screen which consists of:

• ROUTE PREFERENCE ICONS: These icons indicate the status of

the route preferences. Refer to Route preferences.

• CALCULATED POSSIBLE ROUTES: These routes will be displayed

simultaneously, each highlighted with a different color. To view the

details of each route, press the corresponding button.

RECALCULATION OF ROUTE

If the vehicle deviates from the selected guidance route, the navigation

system will automatically recalculate the route from the current location.

VOICE GUIDANCE PROMPTS

Once a route is selected, you will begin to hear voice guidance prompts.

If you are not currently on the route, there will be a prompt. There may

be up to three voice prompts for each maneuver, depending on the

vehicle speed and the distance before the maneuver. The voice prompts

will announce all road names in route guidance instructions. Road name

pronunciations may vary from local pronunciations. The last prompt will

be a double tone and will give just enough time for you to complete the

maneuver.

To adjust the volume level of the voice guidance prompts, turn the

volume control during a voice prompt, or set to the desired level on the

FEEDBACK screen. (Refer to the Menu section).

64

Navigation features

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

NAVIGATION MENU

MAP PREFERENCES

Your navigation system allows you to set specific map preferences. In the

Map Preference screen you may select from:

MAP CONTENT Select one of the

following map displays:

• CURRENT STREET NAME:

Displays the current street name

in a window at the top of the

screen.

• TIME TO DESTINATION:

Displays the distance and

estimated travel time to the selected destination on the left side of the

screen. When selected, a popup screen will also display the Estimated

Time of Arrival (ETA).

• BREADCRUMBING: Stores and allows the display of the vehicle’s

previous route(s). These routes are indicated by white dots on the

map display. The system can store up to about 140 miles/230 km.

GUIDANCE VIEW: Select one of the guidance views:

• FULL SCREEN MAP MODE:

The map is displayed on the full

screen and a turn icon appears in

the upper right hand corner of

the screen.

• SPLIT SCREEN ARROW

MODE: The screen is divided in

two: the map is displayed on the

left, while a turn icon and street

name signify the upcoming

maneuver on the right.

65

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

• SPLIT SCREEN TURN LIST

MODE: The screen is divided in

two, the map is displayed on the

left, and the planned turn list is

on the right.

Regardless which guidance view is

selected, a detailed intersection

screen will appear on the right side

of the map display when the vehicle

is approaching the next turn.

TURN LIST FORMAT: You can

select which order the guidance

instructions appear on the screen:

• TOP TO BOTTOM

• BOTTOM TO TOP

66

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

ROUTE PREFERENCES

You can select certain preferences for your route.

• AVOID FREEWAYS / TOLL

ROADS / FERRIES: The system

will search for routes attempting

to avoid the use of freeways, toll

roads and/or ferries whenever

possible.

• PREFERRED ROUTE: The

system can search for up to three

routes: fastest route, shortest route and unrestricted route (the fastest

or shortest route without any avoid settings). If there are not any

Avoid settings, only two routes will be calculated and displayed. The

preferred route will be automatically highlighted on the map for route

selection.

ADDRESS BOOK — EDITING

The ADDRESS BOOK tab allows

you to view and edit the address

book entries. The maximum number

of entries that can be stored in the

address book is 25. Five of these

entries can be set as Destination

Presets (to be easily accessed), and

one entry can be saved as the Home

location. To set an Address Book entry as a destination preset, select the

address book entry and select the view/edit button.

Select the set button at the bottom of the screen adjacent to Quick Dest.

The list of entries can be sorted by:

• A-Z: List entries by alphabetical order.

• DATE: List entries by date of entry.

• ICON: List entries by icon type.

67

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

VIEW/EDIT: The information

related to each entry can be

changed or entered according to the

following criteria:

• NAME: Input a name or leave this blank.

• LOCATION: Previously programmed address.

• PHONE NUMBER: Select to edit phone number for the specified

entry.

• ICON: Select from a list of available icons. All icons, except for the

Home icon, can be used more than once.

• QUICK DEST SET/CLEAR: A

maximum of five entries can be

selected as Destination Preset

entries. These entries are

accessible directly from the

QUICK DEST tab under the

DEST menu as well as through

any of the ADDRESS BOOK tabs.

• VOICE NAMETAG SET/CLEAR: Use for voice tag designation.

ADD: You can select a location by one of the following methods:

• PREVIOUS DEST

• POI

• ADDRESS

• INTERSECTION

• MAP

• FREEWAY ENT/EXIT

• PHONE NUMBER

DELETE: Press to delete the selected entry from the list.

DELETE ALL: Press to delete all entries in the address book.

SET AS DEST: Press for the DESTINATION MAP screen to appear with

more options from which to select. Refer to Destination menu.

68

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

QUICK POINTS OF INTEREST (POIS)

This tab allows you to set the five

most frequently used Point of

Interest (POI) categories.

• QUICK POI LIST: Lists five preset POI categories. You can change

any of them.

• EDIT: Press to select a different POI category/subcategory from a list.

AVOID AREAS

You can search avoiding all roads

(even freeways) within specified

avoid areas. If any road within an

avoid area is used for the route, an

icon will be displayed on the screen

for route selection. A maximum of

five areas can be stored as Avoid

Areas. They are represented on the

map as colored squares. If a road is specified as an avoid area, it is

represented by a different color to other roads.

VIEW/EDIT: After entries are programmed, they are shown in a list.

Highlight your selection to change/edit the following attributes:

• NAME: Select to enter a different name for the area.

• LOCATION: A map with the selected location will appear on the

screen. You can then:

REDUCE AREA

SAVE AREA

EXPAND AREA

• RETURN: Saves changes to the selected area.

ADD: Add an avoid area by selecting an input method and entering the

required information:

• PREVIOUS DEST

• POI

• ADDRESS

69

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

• INTERSECTION

• MAP

• FREEWAY ENTRANCE/EXIT

• PHONE NUMBER

• CANCEL

DELETE: Press to delete the selected entry.

DELETE ALL: Press to delete all entries in the Avoid Area list.

SETTINGS

UNITS: The system can be set to

display different units:

• ENGLISH (MILES)

• METRIC (KILOMETERS)

AUTO-FILL STATE/PROV: When selected, the State/Province field will

be automatically filled in based on current location for destination entry.

If it is not selected, the last State/Province will be displayed.

AVERAGE SPEED (MPH): You can preset speeds based on driving

habits for calculation of travel time and ETA (Estimated Time Arrival).

• RESIDENTIAL

• MAIN ROADS

• FREEWAY

CALIBRATE: The navigation system supports a quick method to

calibrate the vehicle position. Under normal circumstances this

calibration is done automatically, but over a longer period of time. The

user may want to recalibrate the system if the vehicle icon is not

tracking proper position resulting in inaccurate route guidance

instructions.

• POSITION: The system supports manual adjustment of the vehicle’s

position and heading via the Map. Press to scroll on map until the

desired location is reached and press ENTER. Adjust the vehicle

heading by pressing the arrow buttons until the desired heading is

reached. Press ENTER to save the new settings.

DEFAULT SETTINGS: Press to set all the features in this screen back

to system default.

70

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


VOICE RECOGNITION (IF EQUIPPED)

Your navigation system may be equipped with Voice Recognition (VR), a

hands-free way of operating the radio and navigation system while

driving. With this feature, you can control navigation, audio, display and

voice settings by “speaking” specific commands.

Press or VOICE on your steering wheel controls to activate Voice

recognition. Speak clearly and ensure that the commands are spoken

exactly as they are written or they may not function. You must say the

system function followed by the sub command. System functions are

listed in bold below; subcommands are listed beneath. For example, if

you wanted the map to be shown on the system screen, you would say

Navigation Show Map”.

If the voice system is already engaged in a specific function, there is no

need to continue repeating that function for future commands within a

30 second period. For example, if you just finished saying “Navigation

Show Map” and then wanted to zoom the map in, you could say “Zoom

In” instead of “Navigation Zoom In”. After 30 seconds has elapsed, the

voice system will start the next voice session from the main menu.

Navigation+ Audio+ Display +

Voice

Settings +

Tutorial +

Line In

Rear Aux

Radio +

Detour / Play ON Interaction Lesson 1

Reroute

Mode

Cancel Route Auto Preset OFF Interaction

Mode

Standard

Lesson 2

Cancel Next

Waypoint

Repeat

Instruction

Seek Up Night Interaction

Mode

Advanced

Seek Down Day Profile

Create

Navigation features

Lesson 3

Previous

Lesson

71

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

Navigation+ Audio+ Display +

Voice

Settings +

Voice On Tune Auto Profile

Frequency

Delete

(Profile

Name)

Voice Off Tune AM Brighter Profile Select

(Profile

Name)

Voice Louder Tune FM Dimmer Profile Select

None

Voice Softer Tune FM1 Help Help

Help

Tune FM2

Map

Tune Preset #

Commands

Show Map Store Preset #

Zoom In

Zoom Out Help

Zoom In CD +

Minimum

Zoom In Play

Maximum

Show Play Disc #

Destination

Show or Clear Play Track #

Next

Waypoint

Show or Clear Play Folder #

Route

Show North Play Disc #

Up

Folder #

Track #

Show Heading

Up

Play Next

Disc

Tutorial +

Next Lesson

72

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

Navigation+ Audio+ Display +

Destination

Commands

Route

Home/Return

Home

Destination

(Nametag)

Play

Nametags

Destination or

Find a

Restaurant

Destination or

Find all

Restaurants

Destination or

Find an

American

Restaurant

Destination or

Find an

Chinese

Restaurant

Destination or

Find a Fast

food

Restaurant

Destination or

Find an Italian

Restaurant

Play Next

Folder

Play Next

Track

Play Previous

Disc

Play Previous

Folder

Play Previous

Track

Folder Mode

Folder Mode

On

Folder Mode

Off

Shuffle,

Random or

Mix

Shuffle,

Random or

Mix On

Voice

Settings +

Tutorial +

73

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

Navigation+ Audio+ Display +

Destination or

Find a

Mexican

Restaurant

Destination or

Find a

Seafood

Restaurant

Destination or

Find a Steak

House

Restaurant

Destination or

Find a

Vegetarian

Restaurant

I’m Hungry

Destination or

Find an Auto

Parts

Destination or

Find an/a

automobile /

car dealership

Destination or

Find a Ford

dealership

Destination or

Find a Lincoln

dealership

Shuffle,

Random or

Mix Off

Help

DVD+

Play

Play Next or

Previous

Chapter

Play Next or

Previous

Chapter

Play Next or

Previous

Folder

Play AUX

Play Previous

Folder

Voice

Settings +

Tutorial +

74

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

Navigation+ Audio+ Display +

Destination or

Find a

Mercury

dealership

Destination or

Find an oil

change

Destination or

Find a

Business

Facility

Destination or

Find a

Community

Center

Destination or

Find

Education

Destination or

Find Higher

Education/

College/

University

Destination or

Find K-12

Schools

Destination or

Find an

Exhibition/

Conference

Center

Destination or

Find a Library

Headphones

ON

Headphones

OFF

Shuffle Tracks

Shuffle ON

Shuffle OFF

Folder Mode

ON

Folder Mode

OFF

Help

*Satellite

Radio +

Voice

Settings +

Tutorial +

75

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

Navigation+ Audio+ Display +

Destination or

Find a Named

Place

Destination or

Find a

Hospital

Destination

Police, Find a

Police Station

or Find Police

Destination or

Find an

Amusement

Theme Park

Destination or

Find a Casino

Destination or

Find a Movie

Theater

Destination or

Find a

Museum

Destination or

Find a

Performing

Arts

Destination or

Find a

Zoo/Botanical

Gardens

Destination or

Find an ATM

Play

Seek up

Seek Down

Tune (#)

Tune SR1

Tune SR2

Turn SR3

Preset #

Store Preset #

Next Channel

Voice

Settings +

Tutorial +

76

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

Navigation+ Audio+ Display +

Destination

Bank/Banking

or Find a

Bank

Destination or

Find a

Historical

Monument

Destination or

Find an

International

Border

Crossing

Destination or

Find Parking

Destination or

Find Public

Transit

Destination or

Find an

Airport

Destination or

Find a Bus

Station

Destination or

Find a

Commuter

Rail

Destination or

Find a Ferry

Terminal

Previous

Channel

Voice

Settings +

Tutorial +

77

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

Navigation+ Audio+ Display +

Voice

Settings +

Tutorial +

Destination or

Find a Rest

Area

Destination or

Find a Tourist

Attraction

Destination or

Find Tourist

Information

Destination or

Find Coffee

House, Find

Cafe

Destination or

Find

Pharmacies

Destination or

Find a Book

Store

When voice commands are given for points of interest searches (i.e.

Navigation + Destination + All restaurants), the search criteria varies by

specific category and current road type. The search distance range is

10–80 mi (16–128 km).

Note: Satellite Radio and DVD voice commands are operational only on

vehicles equipped with those features.

78

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

A listing of all available voice commands also resides in the navigation

system. To access this list:

1. Press the MENU hard key.

2. Press SYSTEM INFO.

3. Press HELP.

4. Select VOICE SETTING

COMMANDS.

Voice recognition (VR) operates for all system languages. There is a push

to talk button on the vehicle steering wheel labeled either VOICE or .

Press to activate Voice Recognition. The system will state available

commands, and then listen for a spoken response from you. Speak the

command clearly to ensure that the system is able to recognize and

perform the desired function.

79

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

VOICE RECOGNITION VISUAL FEEDBACK

(NAVIGATION STATUS BAR)

When Voice recognition (VR) is activated, the following icons will appear

on the screen in the status bar.

VR State VR Icon VR Device Text

Main Menu

Main Menu

Audio system

Audio System

Navigation

Navigation

MP3

MP3

Satellite Radio

Satellite Radio

FM Radio

FM

AM Radio

AM

CD

CD

Voice Preferences

Voice Settings

Display

Display

Tutorial

Tutorial

DVD

DVD

DVD_MP3

DVD_MP3

DVD_CD

DVD_CD

VR Recognition Failure

Listening Failed

VR Session Successful

Voice Success

Completion

VR Session Unsuccessful

Voice Failed

Termination

Listening

Listening

80

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

For the best system performance, please adhere to the following:

• The interior of the vehicle needs to be as quiet as possible. Wind noise

from open windows, road vibrations, and radio volume may prevent

the system from correctly recognizing voice commands.

• Wait until the tone sounds after pressing the push to talk button

before speaking a command.

• Speak naturally without large pauses in between words.

• Please realize voice recognition performance is not 100% and varies by

user. The voice recognition system is meant to be a secondary

convenience control and if it doesn’t operate optimally, users can still

operate their navigation system via the touch screen and hard buttons.

To speak voice commands:

1. Push VOICE or on the steering wheel. A tone will sound.

2. ‘Main Menu’ and will appear in the status bar.

3. The system will speak the available voice commands and a tone will

sound.

4. ‘Listening’ and will appear in the status bar and the system

waits for your response.

5. If the system is not confident that it recognized your voice command,

it will ask for a confirmation of yes or no.

6. If the system does not recognize or hear the your voice command, it

will say, “Sorry, please say ....“andrepeat the available voice

commands. The voice failed icon will be displayed in the status

bar.

7. If the system does not recognize or hear your voice command a

second time, the system will say, “Sorry, please press the voice button

and try again” and the voice session is terminated.

8. Once confirmation / recognition takes place, the voice success

icon is displayed. The system will speak the next level of available

commands, a tone will sound, and the appropriate voice menu name and

icon will be displayed.

9. If the voice session is not complete, the system will then speak the

next set of available voice commands, a tone will sound, and the system

will display ‘listening’ and again, waits for a response.

10. This sequence of events occurs until the voice recognition session is

complete.

81

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Navigation features

Three voice recognition tutorials are available through the voice

system:

• Lesson One: What you can do with speech

• Lesson Two: How we’ll work together

• Lesson Three: Getting accustomed to the system

To access the tutorials, press the voice button on the steering wheel and

say, “Tutorial Lesson (1, 2 or 3)”.

Voice settings

Voice settings are adjusted through the voice recognition. In voice

settings, you can customize the system to behave the way you prefer as

well as train the system to fine tune its listening to a specific user by

creating a profile. The following settings are available:

• Interaction mode: standard or advanced

Standard system provides detailed user instructions and announces all

available voice commands

Advanced system speaks less and assumes that the user knows the voice

commands

• Profile: trains the system to create voice profiles of users. The vehicle

must be in Park and the profile takes approximately 10 minutes to

complete.

Voice Tags

Voice recognition includes a

function that allows you to input

personal names for locations to be

recognized by the system. These are

called ‘voice name tags’. You can

assign voice name tags to all

locations stored in the address book

to be used later as destinations.

82

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


FREQUENTLY ASKED QUESTIONS

How do I turn off the Navigation System?

Press and hold the Volume control for at least 3 seconds.

How do I hear the navigation voice prompts?

1. Press the MENU hard button.

2. Select the FEEDBACK tab.

3. Check the VOICE VOLUME LEVEL and that the NAVIGATION

GUIDANCE setting is on.

How do I recover after accidental language re-set?

1. Press the MENU hard button.

2. Select the FEEDBACK/Retour/Reaccion tab.

3. Press the ENGLISH/Anglais/Ingles button to reset language to English.

4. Press the SPANISH/Espanol/Espanol button to reset language to

Spanish.

5. Press the FRENCH/Francais/Frances button to reset language to

French.

Or, you can also turn vehicle off to restart system. Then from the

DISCLAIMER screen, select the desired language before pressing

AGREE.

TROUBLESHOOTING

Symptoms Possible Cause Action

Focus Error

System unable to play Contact your dealer.

reproduced disc.

Bad Disc

Disc was inserted

upside down or the

system is unable to

read the information

in the disc.

The mechanism will

automatically eject

disc.

Track Error

Frequently asked questions

The system is unable

to reproduce a corrupt

MP3 file.

The system will skip

the corrupted track.

83

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Frequently asked questions

Symptoms Possible Cause Action

Invalid Disc Detected Dirty DVD Wipe the DVD with a

dry, soft cloth from

the center to the outer

edge of the disc.

System has detected

incompatible NAV

DVD

Would you like to

change a NEW DVD?

(Popup window)

Address not found/

Address range does

not exist. Show the

midpoint of the street?

(Popup window)

Navigation Fault. A

system fault has been

detected that may

cause the navigation

to perform abnormally.

Please contact your

dealership. (Popup

window)

Error. PINs did not

match. Please re-enter.

(Popup window)

Invalid PIN. Please

Re-enter. (Popup

window)

The DVD mechanism

is unable to reproduce

the information in the

disc inserted in the

DVD slot.

The house number

entered is not

registered in the

database.

System hardware or

software error

A different PIN was

entered to unlock the

system for valet mode.

System does not

recognize PIN as valid.

Eject the currently

loaded disc, and insert

the correct map DVD

in the DVD slot. Refer

to Loading and

Ejecting Navigation

Map DVDs in the

System Features

section.

Press NO and enter a

valid number for the

specified street, or

press YES to view the

middle point of the

street.

Contact your dealer.

Press OK and try

entering PIN again. If

unable, contact your

dealer.

Press OK and enter

different PIN to lock

the system.

84

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Symptoms Possible Cause Action

Map DVD is not in

DVD slot.

Error. Map DVD must

be loaded in order to

change language.

(Popup window)

Navigation DVD error.

Installation failed.

Please install a valid

Navigation DVD.

(Popup window)

Frequently asked questions

The DVD mechanism

is unable to reproduce

the information in the

disc inserted in the

DVD slot.

Press OK, then load a

valid map DVD.

Eject the currently

loaded disc, and insert

the correct map DVD

in the DVD slot. Refer

to Loading and

Ejecting Navigation

Map DVDs in the

System Features

section.

85

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


General Information

SYSTEM HELP

Please refer to the system Help Menu or system functional descriptions.

If additional help is required, please contact Ford Customer Service in

the US at 1 (800) 392–3673 and in Canada 1 (800) 565–3673.

MAP DATA DVD END-USER LICENSE TERMS

The data (“Data”) is provided for your personal, internal use only and

not for resale. It is protected by copyright, and is subject to the following

terms and conditions which are agreed to by you, on the one hand, and

(Licensee). (“Licensee”) and its licensors (including their licensors and

suppliers) on the other hand. Such licensors include NAVTEQ North

America, LLC. Without limiting the foregoing, you agree that NAVTEQ

North America, LLC shall have the right to enforce these Terms directly

against you. 2004 NAVTEQ. All rights reserved. The Data for areas of

Canada includes information taken with permission from Canadian

authorities, including: Her Majesty the Queen in Right of Canada,

Queen’s Printer for Ontario, Canada Post Corporation, Geobase .

TERMS AND CONDITIONS

Personal use only: You agree to use this Data together with your FLM

navigation system for solely personal, non commercial purposes for

which you were licensed, and not for service bureau, time-sharing or

other similar purposes. Accordingly, but subject to the restrictions set

forth in the following paragraphs, you may copy this Data only as

necessary for your personal use to (i) view it, and (ii) save it, provided

that you do not remove any copyright notices that appear and do not

modify the Data in any way. You agree not to otherwise reproduce copy,

modify, decompile, disassemble or reverse engineer any portion of this

Data, and may not transfer or distribute it in any form, for any purpose,

except to the extent permitted by mandatory laws.

Restrictions: Except where you have been specifically licensed to do so

by (Licensee), and without limiting the preceding paragraph, you may

not (a) use this Data with any products, systems, or applications

installed or otherwise connected to or in communication with vehicles,

capable of vehicle navigation, positioning, dispatch, real time route

guidance, fleet management or similar applications; or (b) with or in

communication with any positioning devices or any mobile or

wireless-connected electronic or computer devices, including without

limitation cellular phones, palmtop and handheld computers, pagers, and

personal digital assistants or PDAs.

86

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


General Information

No warranty: This Data is provided to you “as is,” and you agree to use

it at your own risk. (Licensee) and its licensors (and their licensors and

suppliers) make no guarantees, representations or warranties of any

kind, express or implied, arising by law or otherwise, including but not

limited to, content, quality, accuracy, completeness, effectiveness,

reliability, fitness for a particular purpose, usefulness, use or results to be

obtained from this Data, or that the Data or server will be uninterrupted

or error-free.

Disclaimer of warranty:(Licensee) and its licensors (including their

licensors and suppliers) disclaim any warranties, express or implied, of

quality, performance, merchantability, fitness for a particular purpose or

non infringement. Some States, Territories and Countries do not allow

certain warranty exclusions, so to that extent the above exclusion may

not apply to you.

Disclaimer of liability: (Licensee) and its licensors (including their

licensors and suppliers) shall not be liable to you: in respect of any

claim, demand or action, irrespective of the nature of the cause of the

claim, demand or action alleging any loss, injury or damages, direct or

indirect, which may result from the use or possession of the information;

or for any loss of profit, revenue, contracts or savings, or any other

direct, indirect, incidental, special or consequential damages arising out

of your use of or inability to use this information, any defect in the

information, or the breach of these terms or conditions, whether in an

action in contract or tort or based on a warranty, even if (Licensee) or

its licensors have been advised of the possibility of such damages. Some

States, Territories and Countries do not allow certain liability exclusions

or damages limitations, so to that extent the above may not apply to you.

Export control: You agree not to export from anywhere any part of the

Data provided to you or any direct product thereof except in compliance

with, and with all licenses and approvals required under, applicable

export laws, rules and regulations.

Termination for Breach or Bankruptcy: (Licensee) and its licensors,

including NAVTEQ, may terminate this Agreement if you breach any of

its terms. Upon any such termination, you shall immediately cease your

use of the Data and return all copies thereof to LICENSEE or NAVTEQ,

as instructed. (Licensee) and its licensors also may terminate this

Agreement in the event that you (i) fail to pay license fees due for the

Data, or (ii) if any of the following events occur affecting you: (a)

voluntary bankruptcy or application for bankruptcy; (b) involuntary

bankruptcy or application for bankruptcy not discharged within sixty

(60) days; (c) appointment of receiver for all or a portion of your assets;

or (d) any assignment for the benefit of creditors.

87

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


General Information

Entire agreement: These terms and conditions constitute the entire

agreement between (Licensee) (and its licensors, including their

licensors and suppliers) and you pertaining to the subject matter hereof,

and supersedes in their entirety any and all written or oral agreements

previously existing between us with respect to such subject matter.

Governing law: The above terms and conditions shall be governed by

the laws of the Illinois, without giving effect to (i) its conflict of laws

provisions, or (ii) the United Nations Convention for Contracts for the

International Sale of Goods, which is explicitly excluded. You agree to

submit to the jurisdiction of Illinois for any and all disputes, claims and

actions arising from or in connection with the Data provided to you

hereunder.

FCC COMPLIANCE

Changes or modifications not approved by Ford Lincoln Mercury could

void user’s authority to operate the equipment. This equipment has been

tested and found to comply with the limits with the Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to consult the dealer or an

experienced radio/TV technician for help.

PRINCIPLES OF NAVIGATION

The system directs the user based on information derived from global

positioning satellites, road maps stored on the DVD, sensors in the

vehicle and the desired destination. The system compiles all necessary

information to guide the user to the selected destination. Space satellites

broadcast information used to determine the vehicle’s current location.

88

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


General Information

LIMITED GPS RECEPTION

System performance may be adversely affected if GPS reception is

interrupted or interference occurs over a distance of several miles.

The following are possible causes for GPS reception being interrupted.

If the vehicle is:

• In multi-story parking garages

• In tunnels and under bridges

• Inside or in between buildings

• By forests or tree-lined avenues

• In heavy rain showers and thunderstorms

• In valleys and in mountainous regions

• Roads under cliffs

Ensure that you do not have any metal objects on the dashboard and

that if your windows are tinted, they use non-metal tinting instead of

metal oxide tinting. Both of these factors can also interrupt GPS

reception.

If the vehicle has been parked for a long period of time, the navigation

function may be temporarily unresponsive. The navigation system will

operate reliably again once GPS reception is available for a few minutes.

SYSTEM LIMITATIONS

Cold temperature start: When operating the system below 32° F

(0°C), the display screen requires a 2–3 minutes warm-up time to

achieve maximum brightness.

Other conditions: When calculating a route, the system doesn’t take

into consideration any of the following conditions:

• Traffic Conditions

• Weather Conditions

• Driving Habits

• Construction Zones

• New Roads

89

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


General Information

CLEANING THE NAVIGATION DISPLAY SCREEN

Do not spray cleaning fluid directly onto the navigation display screen as

this may cause damage. Instead, spray the cleaning fluid onto a soft cloth

and gently wipe the screen and unit. Use only rubbing alcohol-based

cleaners (i.e. methyl alcohol) or a damp clean cloth.

Do not clean any part of the screen or system with acid cleaners, alkali

cleaners, benzene cleaners, paint thinner or any other solvent.

Do not spill liquids of any kind into the unit.

GLOSSARY

COMP: Compression

DEST: Destination

DSP: Digital Signal Processing

ETA : Estimated Time of Arrival

FCC: Federal Communications Commission

GPS: Global Positioning System

MAP/NAVIGATION DVD: The disc containing a map database to

operate the navigation system.

POI: Point(s) Of Interest

PROV: Province

PTY: Program Type

RDS: Radio Data System

SCV: Speed Compensated Volume

SMART SPELLER: Feature that provides a number of available

candidates matching partial input entered by the user.

SR: Satellite Radio

TOUCH SCREEN: A touch-sensitive screen that lets the user make

choices by touching icons or graphical buttons on the screen.

WAYPOINT: An intermediate stop or destination before the final

destination.

90

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC (if equipped)

WHAT IS SYNC?

SYNC is a hands-free communications and entertainment system that

literally ‘syncs up’ with all other multimedia systems in your vehicle.

SYNC delivers convenience with voice activated calling and hands-free

conversations, digital media player command and control as well as easy

to use voice commands. The world outside your vehicle cabin may be

chaotic, but inside, with SYNC, it’s always a smooth ride. All you have to

do is sync it and stow it. We’ll take care of the rest.

Welcome to the new world of ingenuity and passion - technology that is

both fun and functional. Welcome to SYNC.

Please visit www.SyncMyRide.com.

SYNC features

SYNC offers a variety of phone and media features, such as:

• Send and receive hands-free calls

• Play your digital music through voice activated commands

• Use voice recognition to access your cell phone’s contact list

• Transfer an active phone conversation to a hands-free environment

• Play music stored on your digital media player

• Use your device while charging through the USB port

91

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


• Listen to music streaming from your Bluetooth enabled cellular

phone

• Advanced voice recognition system fluent in English, French and

Spanish

SAFETY INFORMATION

Driving while distracted can result in loss of vehicle control,

accident and injury. Ford strongly recommends that drivers use

extreme caution when using any device that may take their focus off

the road. The driver’s primary responsibility is the safe operation of

their vehicle. Only use cell phones and other devices not essential to

the driving task when it is safe to do so.

• Do not attempt to service or repair SYNC. See your authorized dealer.

• Do not operate playing devices if the power cords and/or cables are

broken, split or damaged. Carefully place cords and/or cables where

they will not be stepped on or interfere with the operation of pedals,

seats and/or compartments, or safe driving abilities.

• Do not leave playing devices in the vehicle in extreme conditions as it

could cause damage to your device. Refer to your device’s user guide

for further information.

• For your safety, some SYNC functions are speed dependent and

cannot be performed when the vehicle is traveling at speeds greater

than 3 mph (4.82 km/h).

• Ensure that you review your device’s user guide before using with

SYNC.

PHONE DEPENDENT FEATURES

While SYNC supports a variety of features, many are dependent upon the

functionality of your cell phone with Bluetooth wireless technology. At

a minimum, most cellular phones with Bluetooth wireless technology

support the following functions:

• Answering an incoming call

• Ending a call

• Using privacy mode

• Dial a number

• Redial

• Call waiting notification

92

SYNC (if equipped)

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC (if equipped)

• Caller ID

Other features, such as text messaging via Bluetooth, and automatic

phone book download are phone dependent features. To ensure that you

have a compatible cellular phone, refer to your phone’s user manual and

visit www.SyncMyRide.com.

SYNC VOICE RECOGNITION FEATURE

SYNC is equipped with an advanced interactive Voice Recognition (VR)

system. This system allows you to perform many operations by

“speaking” certain commands to the system. The system will respond

with a series of audible tones, prompts, questions and spoken

confirmations depending on the situation and the chosen level of

dialogue interaction.

Feedback through audible tones

Your VR system will respond through various audible tones. You may

hear a tone at the following times:

• When you press VOICE or on your steering wheel controls.

• When you access the help feature.

• When the VR system does not understand your request

• When a VR session is completed successfully

• When a VR session is ended unsuccessfully

• When a speed dependent feature has been accessed

• When a new device is connected

SYNC has five different audible tones that will play depending on the

circumstance.

• Initial: Sounds when you are entering a new mode.

• Positive: Sounds for a positive recognition or a successful VR session

completion.

• Negative: Sounds for a negative recognition, an unsuccessful VR

session, or when a speed dependent feature has been accessed.

• Listening: Sounds when the system is ready to listen for a command.

• Help: Sounds when you ask for ’Help’.

Confirmation prompts

Confirmation prompts are short questions asked by the system when the

system has not clearly understood your request or when there are many

93

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


possible responses to your request. For example, if you have

Confirmation prompts ON, the system may say, “Phone, is that correct?”.

The system will then listen for a “Yes” or “No” confirmation from you. If

you say “Yes”, the system will proceed. If you say “No”, the system will

ask you to say the command again. If you have Confirmation prompts

OFF, the system will simply make a best guess as to what you requested.

If the system has a low confidence level of what was asked, it will

prompt you to try again or ask for help.

Note: Even with Confirmation prompts turned OFF, you may be asked to

confirm certain settings occasionally.

Clarification through candidate lists

Candidate lists are created when the system has several possible options

of similar level of confidence as a result of your request. The system will

submit back to you as many as four possibilities for your clarification.

This may happen either with your phone book and/or music selections.

Example #1:

You want to call John Doe at home, so you say, “Call John Doe at home”.

If the system has a similar confidence level for a few items, it may

respond with:

• (initial tone) “Say 1 after the tone to call John Doe at home. Say 2

after the tone to call Johnny Doe on mobile. Say 3 after the tone to

call Jane Doe at home.” (listen tone)

Example #2:

You want to listen to a certain artist, so you say, “Search Artist John”. If

the system has a similar confidence level for two possible options, it may

respond with:

• (initial tone) “Say 1 after the tone to search John Doe. Say 2 after the

tone to search Johnny Doe.” (listen tone)

Using voice commands with your SYNC system

There is a push to talk button on your steering wheel controls labeled

either VOICE or . Press to activate Voice Recognition. You will hear a

tone, signaling that the system is ready to accept your command. Any

command spoken prior to the beep will not register with the system.

Speak the command clearly to ensure that the system is able to

recognize and perform the desired function.

For the best system performance:

• Ensure that the interior of the vehicle is as quiet as possible. Wind

noise from open windows, road vibrations, and radio volume may

prevent the system from correctly recognizing voice commands.

94

SYNC (if equipped)

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC (if equipped)

• Wait until the tone sounds after pressing the push to talk button

before speaking a command.

• At any time, you can interrupt the system while it is speaking by

pressing VOICE or . The system will respond with a listening tone

and allow you to speak a command.

• Speak naturally without large pauses in between words.

• Voice recognition performance is not 100% and is meant to be a

secondary convenience control. SYNC can always be operated through

the navigation and steering wheel controls.

At any time, you may say these commands to change modes:

• Phone

• Voice settings

• Cancel

• Help

Phone: Say to access hands-free phone mode.

Voice Settings: Say to access the voice settings menu. Refer to

Commands for voice settings in the following section.

Help: Say at any time for options in a specific mode. SYNC will list

various options for you audibly. The ’help’ request is always available.

Cancel: Say to cancel the requested action.

Commands for voice settings

In voice settings, you can customize the level of system interaction, help

and feedback. The system default settings include standard interaction as

well as candidate lists and confirmation prompts as all provide the most

guidance and feedback.

At any time, while in voice settings, you may say these commands

to adjust the voice settings:

• Interaction mode advanced • Interaction mode standard

• Confirmation prompts on • Confirmation prompts off

• Media candidate lists on • Media candidate lists off

• Phone candidate lists on • Phone candidate lists off

Interaction mode standard/advanced: Standard interaction mode

provides more detailed interaction and guidance while the advanced

mode has less audible interaction and more tone prompts.

Confirmation prompts on/off: Confirmation prompts are short

questions asked by the system when the system has not clearly heard or

understood your request. Note: Even with Confirmation prompts turned

OFF, you may be asked to confirm settings occasionally.

95

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Phone/media candidate lists on/off: Candidate lists are a list of

possible results from your voice commands. These occur when SYNC has

equal confidence of several possible results from your voice command.

For voice commands available in SYNC phone mode, refer to Voice

commands in phone mode in the Phone chapter.

For voice commands available in SYNC media mode, refer to Voice

commands in media mode in the Media chapter.

Using SYNC voice commands with your navigation system

When Voice recognition (VR) is activated, the following icons will appear

in the status bar.

VR State

VR Icon

Main Menu

Audio system

Navigation

Voice Preferences

Display

VR Recognition Failure

VR Session Successful Completion

VR Session Unsuccessful Termination

Listening

SYNC Phone

SYNC media

For the best system performance, please adhere to the following:

• The interior of the vehicle needs to be as quiet as possible. Wind noise

from open windows, road vibrations, and radio volume may prevent

the system from correctly recognizing voice commands.

• Wait until the tone sounds after pressing the push to talk button

before speaking a command.

• Speak naturally without large pauses in between words.

• Please realize voice recognition performance is not 100% and varies by

user. The voice recognition system is meant to be a secondary

convenience control and if it doesn’t operate optimally, you can still

operate your navigation system via the touch screen and hard buttons.

96

SYNC (if equipped)

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC (if equipped)

To speak voice commands:

1. Push the VOICE or button on the steering wheel. A tone will

sound.

2. The system will say, “Main menu” and the ‘Listening’ icon ( ) will

appear in the status bar.

3. Say “Phone” to access SYNC’s phone features or say “User Device” to

access SYNC’s media features. Depending on your choice, SYNC will say

“Phone” or “USB”, “Please say a command”. A tone will sound signifying

SYNC is ready for your response.

4. ‘Listening’ and will appear in the status bar and the system

waits for your response.

5. If the system is not confident that it recognized your command, it will

ask for a confirmation of yes or no.

6. If the system does not recognize your command, the voice failed

icon will be displayed in the status bar. The system will give you a

short list of commands you can say. Say the command again. If the

system doesn’t recognize the repeated command, the system will say,

“Please say a command, help or cancel”.

7. If the system does not recognize your command a second time, the

system will say, “I didn’t understand you, please try again.”

8. Once confirmation / recognition takes place, the voice success

icon is displayed, the system will speak the next level of available

commands, a tone will sound, and the appropriate voice menu name and

icon will be displayed.

9. If the voice session is not complete, the system will then speak the

next set of available voice commands, a tone will sound, and the system

will display ‘Listening’ and again, waits for a response.

10. This sequence of events occurs until the voice recognition session is

complete.

97

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC (if equipped)

QUICK REFERENCE CHART

SYNC works with your navigation system, DVD system (if equipped),

voice commands and also through your steering wheel controls. Below is

a listing of the functions of your steering wheel controls and navigation

bezel controls when using SYNC.

Navigation

bezel control

N/A

Steering wheel

control

Function

Press to answer an incoming call.

Press to send a call or text message.

Press and hold to end a call.

Press it initiate a redial.

N/A VOICE Press to activate Voice Recognition.

Press and hold to end an active

voice session.

Refer to SYNC voice recognition

feature for further information.

SEEK ,

,

Press to access the previous/next

track.

N/A OK Press to confirm your selection.

MEDIA N/A Press to access all available media

sources in your vehicle, including

SYNC MEDIA. For further

information, refer to the SYNC

media features chapter.

PHONE N/A Press to access SYNC PHONE

features.

98

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


QUICK START — HOW TO GET GOING

SYNC phone features

Driving while distracted can result in loss of vehicle control,

accident and injury. Ford strongly recommends that drivers use

extreme caution when using any device that may take their focus off

the road. The drivers primary responsibility is the safe operation of

their vehicle. Only use cell phones and other devices not essential to

the driving task when it is safe to do so.

Pairing your phone through your navigation system

Note: This is a speed dependent feature and will not work if your

vehicle is traveling at speeds greater than 3 mph (4.82 km/h).

The first thing you will need to do to get going is to pair your

Bluetooth enabled cellular phone with SYNC.

1. Press PHONE on the navigation bezel.

2. The screen will read NO PHONE

CONNECTED. Press SETTINGS to

go to the SETTINGS tab.

3. Press ADD.

4. If Bluetooth is on, SYNC will

begin the pairing process between

your Bluetooth enabled phone or

device and SYNC.

Note: Please refer to your phone’s user guide for specific pairing

instructions.

99

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

5. SYNC will give you a six digit Pass-key (PIN) that you will need to

enter into your phone or device when prompted.

When the pairing is complete, PAIRING SUCCESSFUL and then DEVICE

NAME CONNECTED will appear on the screen.

6. Press YES or NO when SYNC prompts you to set the phone as the

FAVORITE PHONE.

As a favorite phone, SYNC will search for this phone upon each

connection cycle. If a phone is not set as a primary, it will still be stored

in the device listing to enable you to reconnect to it at any time.

7. If supported by your Bluetooth enabled cellular phone, SYNC will

prompt you to download your phone book/call history. Press YES or NO.

Note: Selecting YES will tell SYNC to re-download the phone book and

call history information from your Bluetooth enabled cellular phone (if

supported) EVERY time your phone reconnects to SYNC. If you have

made any changes to your phone book/call history in SYNC, they will be

overwritten with the new download.

SYNC will confirm when the phone book and call history are downloaded.

Making a call using your navigation system

Making a phone call using SYNC is easy.

Press PHONE on the navigation bezel and select from one of the

following:

• Use the keypad on the PHONE

tab to manually enter a phone

number and press SEND.

OR

100

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


• Select the PHONE BOOK tab (if

the desired number is saved in

the downloaded phone book

information).

• Use the quick sort buttons to

browse to the desired contact.

• Select the desired contact and

press DIAL.

Note: This is a phone dependent feature.

OR

• Select the CALL HISTORY tab (if

the desired number is saved in

the downloaded call history

information).

• Select the desired contact and

press DIAL.

SYNC phone features

Note: This is a phone dependent feature.

Making a call using voice commands

1. Press or VOICE. A tone will sound and the system will say “Main

menu”.

2. Say “Phone”.

3. When prompted, say, “Call or say “Dial”

and the desired number.

To erase the last spoken digit, say “Delete”.

To erase all spoken digits, say “Clear”.

4. Once the desired number/contact is on the screen, either say “Call” or

“Dial”. SYNC will attempt to connect to the desired number.

Note: Once the call is placed, it will be logged into your outgoing call

history folder.

101

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

USING PHONE FEATURES WITH YOUR NAVIGATION SYSTEM

While SYNC has a variety of features, many of them are dependent on

your phone’s functionality. To ensure that you have a compatible phone

or to check which features are compatible with SYNC, please check your

phone’s user guide and also visit www.SyncMyRide.com.

Hands-free calling is one of the main features of SYNC. SYNC works in

conjunction with your Bluetooth enabled cellular phone and your

navigation system to offer many options. To access:

1. Press PHONE on the navigation bezel.

2. On the phone screen you can

choose from:

• SEND: Press to receive an

incoming call, make an outgoing

call, or to redial.

• END: Press to end or ignore a

call.

• PRIVACY MODE: Press to activate privacy mode. During an active

phone call with SYNC, you can choose to transfer the call to your

Bluetooth enabled cellular phone for a private conversation.

Note: This is a phone dependent feature.

• HOLD CALL: Press to put an active call on hold to have a private

conversation within your vehicle cabin. Press again to take off hold.

Note: This is a phone dependent feature.

• JOIN CALLS: Press to join two active calls.

Note: This is a phone dependent feature.

• Digit entry: Press the numbers to manually enter a phone number to

call.

• Signal/battery strength and roaming status

Note: This is a phone dependent feature.

• : Press to see additional numbers or information (if available).

• : This Bluetooth icon illuminates when a Bluetooth enabled phone

is connected to SYNC.

102

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

SAVING A CONTACT OR A PHONE NUMBER AS A QUICK DIAL

After you have connected your Bluetooth enabled cellular phone and

downloaded your phone book/call history, SYNC allows you to save

10 frequently called numbers for quick access.

1. Press PHONE on the navigation

bezel.

2. Press the PHONE BOOK or CALL

HISTORY tab.

3. Select the phone number or the

contact you wish to save to the

Quick Dial screen.

4. Press SAVE.

5. Select the Quick Dial location in

which you wish to store the contact.

6. Press SET/REPLACE at the

bottom of the screen to save the

contact’s number to the chosen

Quick Dial location.

The system will confirm when the

number of the contact is

successfully stored.

Using Quick Dial numbers

1. Press PHONE on the navigation bezel.

2. Select the QUICK DIAL tab to

access saved numbers. The icon to

the right of the contact’s name will

identify the location of the

respective contact (i.e. home, work,

cell, etc). The number to the left of

the name will identify the Quick

Save location.

Note: The location icon is a phone dependent feature.

3. Select the desired contact to initiate a call.

103

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

Replacing contacts in your Quick Dial locations

SYNC allows you to replace contacts in your Quick Dial section.

1. Press PHONE on the navigation

bezel.

2. Press the PHONE BOOK or CALL

HISTORY tab to select the desired

contact or number with which to

replace an existing contact or

number saved to a Quick Dial.

3. Select the number or the contact

you wish to save to the Quick Dial screen.

4. Press SAVE.

5. Select the location in which to

place the desired contact or number

and press SET/REPLACE at the

bottom of the screen.

6. Select the location in which you

wish to replace the current one.

The system will prompt you to

confirm the replacement.

USING THE PHONE BOOK FEATURE

Note: This is a speed dependent feature. The vehicle must be moving

less than 3 mph (4.82 km/h) to use this feature.

SYNC enables you to view the contacts downloaded from your Bluetooth

enabled cellular phone. To access:

1. Press PHONE on the navigation bezel.

104

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

2. Select the PHONE BOOK tab to

access the phone numbers of the

contacts downloaded from your

Bluetooth enabled cellular phone.

Note: SYNC will categorize your

contacts alphabetically in the Quick

Sort buttons on the right of the

screen. The buttons will be

highlighted if there are contacts stored in that category. Press the

highlighted category to access those listings.

For your safety, while you are driving, SYNC limits the number of

viewable contacts. However, all contacts are always available through

voice commands.

Note: If supported by your phone, SYNC will assign location icons for

the numbers (i.e., cellular number, home number).

USING YOUR CALL HISTORY

If your Bluetooth enabled cellular phone supports phone book/call

history downloads via Bluetooth, SYNC will provide these numbers

sorted in the CALL HISTORY tab. If your Bluetooth enabled cellular

phone does NOT support phone book/call history downloads via

Bluetooth, then SYNC will log all calls made through SYNC in the CALL

HISTORY tab.

1. Press PHONE on the navigation bezel.

2. Select the CALL HISTORY tab

which allows you to have quick

access to recent call activity.

Press OUTGOING to view your outgoing calls.

Press INCOMING to view your incoming calls.

Press MISSED to view your missed calls.

105

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

SYSTEM SETTINGS

SYNC allows you to connect, add, delete or set specified phones as a

favorite as well as change advanced settings.

To access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab and

then choose the desired device.

You can now choose from the

following options:

CONNECT

ADD

DELETE

SET AS FAV (Favorite)

ADVANCED

Please refer to the following sections for more information on these

features.

Connecting a previously paired phone to SYNC

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Select the desired device.

4. Press CONNECT.

SYNC will confirm it is connecting

to the selected phone.

Note: When SYNC connects the newly selected phone, it will disconnect

the previously connected phone.

106

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

Adding a new phone to SYNC

Note: This is a speed dependent feature. For your safety, this procedure

cannot be completed if the vehicle is traveling at speeds faster than

3 mph (4.82 km/h).

Note: SYNC can store up to 12 previously paired phones.

This feature allows you to add (pair) a new Bluetooth enabled phone to

SYNC. To access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADD.

4. When prompted on your phone’s

display, enter the PIN provided by

SYNC.

Depending on your phone’s

capability, you may be prompted

with additional options from your

phone or SYNC such as downloading

the phone book/call history and

setting a favorite.

Deleting a phone from SYNC

This feature allows you to delete a previously paired phone from SYNC.

Note: Deleting your phone will remove all information relevant to that

phone such as phone book/call history, text messages, etc.

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Select the desired phone.

4. Press DELETE. The system will

ask you to confirm.

107

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

Setting a phone as your favorite

SYNC allows you to set a phone as your favorite. This will then be the

primary phone that SYNC reconnects to after each ignition cycle.

To access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Select the desired device.

4. Press SET AS FAV.

Note: A star icon ( ) will appear to the left of the currently selected

favorite phone, and a double arrow icon ( ) will appear to the right of

the currently connected phone.

Advanced settings

SYNC allows you to change many Advanced Settings.

To access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADVANCED.

4. Scroll using / on the

navigation screen to cycle through

the following options:

• Bluetooth On/Off

• Incoming Call Ringer

• Text Message Notification

• Automatic Download On/Off

• Modify Phonebook

108

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

• Provider

• Prompts On/Off

• Factory Defaults

• Master Reset

• Install

System Information

Turning Bluetooth on/off

Turning Bluetooth OFF will turn off access to all features to all SYNC

Bluetooth related features (i.e., text messaging, hands-free calling,

Bluetooth media streaming). Any incoming text or phone messages will

go into their respective missed folders.

To access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADVANCED.

4. Select ‘Bluetooth On/Off’.

109

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

5. Select On or Off.

Selecting your ring tone

SYNC allows you to select from various ringers which will sound during

an incoming call. To access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADVANCED.

4. Scroll using / on the

navigation screen and select

‘Incoming Call Ringer’.

5. Select from three ring tones, your

cellular phone’s ring tone or to turn

the ringer off.

110

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

Turning the text message notification on/off

You can choose to turn SYNC’s text message notification on or off. To

access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADVANCED.

4. Select ‘Txt Msg Notification’ and

turn the feature on or off.

Press YES to turn text message

notification on. With notifications

turned on, an audible tone sounds

during an incoming text message

and response options appear in the

display (i.e., view the message, have

the system read the message aloud,

dial the person sending the message

or cancel).

Press NO to turn text notifications off. With notifications turned off, you

will not be notified by a tone and the incoming text message will not

appear on screen.

Selecting automatic downloading

If you choose, SYNC will automatically download your phone book and

call history from your connected Bluetooth enabled cellular phone upon

every connection cycle. This automatic download will overwrite your

existing phone book and call history stored in SYNC.

To access:

1. Press PHONE on the navigation bezel.

111

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

2. Select the SETTINGS tab.

3. Press ADVANCED.

4. Select ‘Auto Download On/Off’.

5. Select On or Off.

Modifying your phone book and call history

SYNC allows you to add contacts as well as download and delete your

phone book/call history.

Note: Erasing a contact or all contacts in your phone book/call history in

your SYNC system will NOT erase any information in your cellular phone.

To access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADVANCED.

112

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

4. Select ‘Modify Phonebook’ and

select from:

ADD CONTACTS: Select to ‘push’

contacts from your Bluetooth

enabled cellular phone. SYNC will

prompt you to send the contacts

from your phone. When successfully

sent, the display will read XXX

CONTACTS RECEIVED FINISHED?

Press YES if you are finished or

press NO if you wish to send more contacts to SYNC.

Note: Pushing contacts via Bluetooth is a phone dependent feature.

Refer to your phone’s user guide for instructions.

DOWNLOAD PHONE BOOK /

CALL HISTORY: Select YES to

automatically download the phone

book/call history from your currently

connected Bluetooth enabled

cellular phone. Select NO and the

system will not perform this

function upon every connection

cycle.

DELETE PHONE BOOK / CALL

HISTORY: Select YES to delete the

entire phone book/call history from

SYNC. Note: This function will NOT

delete any information from your

connected Bluetooth enabled

cellular phone.

113

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

Viewing your phone’s provider

Note: This is a phone dependent feature.

To view your phone’s provider through SYNC:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADVANCED.

4. Scroll using / on the

navigation screen until ‘Provider’

appears.

Choosing prompts on/off

SYNC is equipped with an advanced voice recognition system which can

perform a multitude of tasks. For example, SYNC’s voice recognition

system will ask for clarification if it does not have a high level of

confidence in what was spoken. The level of feedback which SYNC

provides can be adjusted. You can choose a higher level of verbal

prompts for more guidance or you can choose to simply hear the

prompts when the system needs direction.

To access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADVANCED.

114

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

4. Scroll using / on the

navigation screen and select

‘Prompts On/Off’.

5. Select ‘On’ for a higher level of

voice interaction or ‘Off’ to turn off

the voice prompts.

Returning to the factory default settings

SYNC allows you to return to its factory default settings. This selection

will not erase your downloaded phone book/call history, text messages,

etc. If you wish to erase all information, refer to Performing a master

reset in the following section.

To access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADVANCED.

4. Scroll using / on the

navigation screen and select

‘Factory Defaults’.

115

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

5. SYNC will ask you to confirm

your selection. Press YES and the

system will confirm FACTORY

DEFAULTS RESET.

Performing a master reset

Performing a master reset will not only return all preference settings to

the factory defaults, but it will also completely erase all phone book, call

history and text messages previously downloaded to SYNC. To access:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADVANCED.

4. Scroll using / on the

navigation screen and select ‘Master

Reset’.

5. SYNC will ask you to confirm.

Press YES to continue.

116

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

SYNC will confirm when the reset is

complete.

Installing a new application

You can download new software applications (if available) and then load

the desired applications onto SYNC through your USB port. Please refer

to www.SyncMyRide.com for more information.

To install any downloaded software:

1. Press PHONE on the navigation bezel.

2. Select the SETTINGS tab.

3. Press ADVANCED.

4. Scroll using / on the

navigation screen and select ‘Install’.

Follow the prompts.

Accessing system information

To access SYNC system information:

1. Press PHONE on the navigation bezel.

117

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

2. Select the SETTINGS tab.

3. Press ADVANCED.

4. Scroll using / on the

navigation screen and select ‘System

Information’.

This screen will show you SYNC’s

system information.

TEXT MESSAGING

Note: Downloading and sending text messages via Bluetooth are phone

dependent features.

Note: Certain features in text messaging are speed dependent and

cannot be completed when the vehicle is traveling at speeds over 3 mph

(4.82 km/h).

SYNC not only enables you to send and receive text messages via

Bluetooth, but SYNC will read them to you aloud and also translate many

popularly used text messaging acronyms such as “lol”. SYNC also allows

you to respond with a list of predefined messages.

To access:

1. Press PHONE on the navigation bezel.

118

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

2. Select the TEXT MESSAGE tab.

SYNC will automatically check to

see if the currently connected

phone supports text messaging. If it

does not, this screen will display.

3. If your phone is equipped for text

messaging, SYNC will take you to

the text messaging screen. From

this screen you will be able to select

from the following options:

VIEW: Select the desired text message and press VIEW to view the text

message.

Note: For your safety, this is a speed dependent feature.

LISTEN: Select desired message and press LISTEN to have the system

read the text message to you aloud.

COMPOSE: Select to compose a new text message.

Note: For your safety, this is a speed dependent feature.

DELETE ALL: Select to delete all text messages from SYNC.

Note: This will not delete all messages from your Bluetooth enabled

cellular phone.

DOWNLOAD: If your phone supports downloading text messages via

Bluetooth wireless technology, you can download your unread text

messages to SYNC.

Note: SYNC does not download read text messages from your phone.

119

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

Receiving an incoming text message

When there is an incoming text

message, an audible tone will sound

and the screen will display a pop up

with the caller name and ID if the

caller is saved in your phone book.

Press VIEW to view the text

message.

Press LISTEN for SYNC to read the

message to you aloud.

Press REPLY to send a reply text

message.

Press DIAL to call the contact.

Press CANCEL to exit the screen.

From the VIEW screen, you can

then choose to:

• LISTEN as SYNC reads the

message to you aloud.

• COMPOSE your own message.

• REPLY to the message.

• FORWARD the text message to

someone in your phone book or to a phone number.

Sending a text message

Note: Sending text messages via Bluetooth is a phone dependent

feature.

Note: This is a speed dependent feature and cannot be completed when

the vehicle is traveling at speeds over 3 mph (4.82 km/h).

1. Press PHONE on the navigation bezel.

120

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

2. Select the TEXT MESSAGE tab.

3. Press COMPOSE.

4. Scroll using / on the

navigation screen to cycle through a

list of 15 predefined text messages

you can send from SYNC.

• Can’t talk right now

• Call me

• Call you later

• Be there in 10 minutes

• Be there in 20 minutes

• Yes

• No

• Why?

• Thanks

• Where R you?

• I need more directions

• I love you

• Too funny

• Can’t wait to see you

• I’m stuck in traffic

5. Select the desired text message. In addition to your text, the message

will also contain a signature of : “This message was sent from my Ford,

Lincoln or Mercury vehicle.”

121

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

6. Press RECIPIENTS. SYNC

will now allow you to choose to

whom you would like to send your

text message.

Note: Only one recipient per text

message is allowed.

7. Press PHONE BOOK to access

your phone book listings.

Press / to cycle through the

contacts. Press the desired contact

and press SEND.

Press PHONE NUMBER to send

your text message to a phone

number (which is not listed with a

contact in your phone book/call

history). Use the dial pad to

manually enter the desired number.

Once the number is entered,

press SEND.

SYNC will ask you to confirm.

Press SEND.

122

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

Forwarding a text message

Note: Forwarding text messages via Bluetooth is a phone dependent

feature.

Note: This is a speed dependent feature and cannot be completed when

the vehicle is traveling at speeds over 3 mph (4.82 km/h).

1. Press PHONE on the navigation bezel.

2. Select the TEXT MESSAGE tab.

3. Press COMPOSE.

4. Scroll using / on the

navigation screen to select one of

SYNC’s 15 predefined text messages.

5. Press RECIPIENTS.

SYNC will now allow you to choose

to whom you would like to send

your text message.

Note: Only one recipient per text message is allowed.

6. Press PHONE BOOK to access

your phone book contacts.

Select the desired contact and

press SEND.

SYNC will ask you to confirm.

Press SEND.

123

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC phone features

VOICE COMMANDS IN PHONE MODE

Driving while distracted can result in loss of vehicle control,

accident and injury. Ford strongly recommends that drivers use

extreme caution when using any device that may take their focus off

the road. The drivers primary responsibility is the safe operation of

their vehicle. Only use cell phones and other devices not essential to

the driving task when it is safe to do so.

In phone mode, you may say any of the following commands:

• Dial

• Call

• Call at home

• Call on mobile OR cell

• Call at work OR • Call on other

call in office

Note: In the above possible commands, “” is a dynamic listing in

that it could be any desired name from your phone book, call history,

etc.

Note: With the above commands, words in ( ) are optional and do not

have to be spoken for the system to understand the command.

In phone mode, you can say “Dial” to access any of the following

commands:

• Number 0–9

• Dial

• Delete (deletes one digit) • Clear (deletes all entered digits)

• Plus

• Star

• Asterisk (*)

• 800 (eight hundred)

• 700 (seven hundred)

• 900 (nine hundred)

• 411 (four-one-one), 911

• # / (pound, slash)

(nine-one-one), etc.

In phone mode, you may say these commands at any time:

• Phone

• Voice settings

• Cancel

• Help

124

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


HOW TO GET GOING WITH SYNC MEDIA

SYNC media features

Driving while distracted can result in loss of vehicle control,

accident and injury. Ford strongly recommends that drivers use

extreme caution when using any device that may take their focus off

the road. The drivers primary responsibility is the safe operation of

their vehicle. Only use cell phones and other devices not essential to

the driving task when it is safe to do so.

Connecting your digital media player to SYNC

1. Ensure that the vehicle and navigation system are ON.

2. Plug the media device into the USB port and ensure that the device is

ON. (Refer to your vehicle’s Owner’s guide for exact USB port location.)

3. Press MEDIA on the navigation bezel.

4. Select the USER DEVICE tab.

5. Press SOURCE repeatedly until

USB appears.

6. Press MUSIC LIBRARY.

7. Select from the listed features.

Please refer to Using the Media

Music Library later in this chapter.

125

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Connecting your digital media player to SYNC via voice commands

1. Ensure that the vehicle and navigation system are ON.

2. Plug the media device into the USB port and ensure that the device is

ON. (Refer to your vehicle’s Owner’s guide for exact USB port location.)

3. Press VOICE or . SYNC will say, “ Main menu” and the listening

icon will appear in the display.

4. Say “User Device”. The system will say, “USB, please say a command.”

SYNC will begin indexing the music media when the device is plugged

into the USB port. If your digital media player contains many media files,

INDEXING may appear in the display. When the indexing process is

complete, you may access the media content in your digital media player

using voice commands.

5. Once the music is indexed, you can play music on your digital media

player by saying any of the following commands:

• Play All

• Play Artist

• Play Album

• Play Genre

• Play Playlist

• Play track

SYNC MEDIA SOURCES AND FEATURES

The USER DEVICE tab provides you access and control over the SYNC

media sources: USB, BT AUDIO and LINE IN. Once you choose which

SYNC media source you would like to listen to, you can then use SYNC’s

many other features to make playing adjustments.

To access:

1. Ensure that your playing device is plugged into the USB port or

Auxiliary input jack (LINE IN) and is ON.

Note: If you already have a device connected to the USB port, you

cannot access the LINE IN feature. Some digital media players require

both USB and LINE IN ports to stream data and music separately.

2. Press MEDIA on the navigation bezel.

126

SYNC media features

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

3. Select the USERS DEVICE tab.

4. Press SOURCE repeatedly to

cycle through the possible media

sources of USB, BT AUDIO and

LINE IN.

You can also access the following

buttons:

• MUSIC LIBRARY: Provides you access to SYNC’s many media

features, such as: Play All, Play Artists, Play Albums, Play Tracks, Play

Playlists, and Explore the USB.

• SIMILAR MUSIC: In USB mode, select to have SYNC create a new

playlist of music similar to the currently playing track.

• REPEAT: Select to repeat the current track in USB mode.

• SHUFFLE: Select to shuffle the current tracks in USB mode.

• SETTINGS: Refer to Advanced settings in the SYNC phone features

chapter for information on how to make adjustments to the prompts,

language, master reset, factory defaults, etc.

• TEXT: Press to view additional information, if available.

ACCESSING AND USING YOUR USB PORT

Your vehicle is equipped with a USB port. (For exact location, refer to

your vehicle’s Owner’s guide). You can use the USB port to plug in and

access media devices as well as charge devices (if supported by your

device). For a list of compatible media players, refer to

www.SyncMyRide.com.

Note: Since your USB port allows you to charge your device (if

supported by your device), SYNC will not automatically change media

modes when something is initially plugged into the USB port. To access:

1. Ensure that your digital playing device is plugged into the USB and is

ON.

2. Press MEDIA on the navigation bezel.

127

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

3. Select the USER DEVICE tab.

4. Press SOURCE repeatedly to until

USB appears in the line above

SOURCE.

If the connected device and media content is supported, SYNC will begin

indexing available media files. NO MEDIA will appear if there are no

readable media files for SYNC to play. If there are readable files,

INDEXING may appear. If Autoplay is ON, SYNC gives you the ability to

access media files randomly as they are indexed. If Autoplay is OFF,

indexed media is not available until the indexing process is complete.

After indexing is complete, INDEXED will appear.

Once indexing is complete, you may press / to access the

previous/next track. You may also press / to play/pause the

current track.

Note: SYNC is capable of indexing thousands of average size media files.

The time required to complete the indexing process is dependent upon

the size of the media content being indexed.

If at any time the device is removed

from the USB port, USB REMOVED

will appear.

128

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

Supported media players, formats and metadata information

SYNC is capable of hosting nearly any digital media player, including

iPod, Zune, “Plays from device” players, and most USB drives.

Supported audio formats include MP3, WMA, WAV and AAC.

SYNC is also able to organize and sort your indexed media from your

playing device by metadata tags. Metadata tags are descriptive software

identifiers embedded in your media files which provide information about

the media file. SYNC supports the following metadata tags:

• Artist

• Album

• Genre

• Track

If your indexed media files contain no information embedded in these

metadata tags, SYNC will automatically classify the empty metadata tags

as UNKNOWN.

What’s playing?

At any time while a track is playing, SYNC will read the metadata tags of

the track to you (if populated). Simply press or VOICE. A tone will

sound and SYNC will say “Main menu”. Say “USER DEVICE” and, when

prompted, ask “What’s playing?”

STREAMING MUSIC FROM YOUR BLUETOOTH ENABLED PHONE

Note: This is a phone dependent feature. Refer to your phone’s user

guide for further information on how to stream Bluetooth audio.

SYNC allows you to stream music from your Bluetooth enabled cellular

phone to play through SYNC. To access:

1. Ensure that the desired music is playing on your paired phone and

your phone is in Bluetooth audio streaming mode.

2. Press MEDIA on the navigation bezel.

129

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

3. Select the USER DEVICE tab.

4. Press SOURCE repeatedly to until

BT AUDIO appears in the line above

SOURCE.

USING LINE IN (AUXILIARY INPUT JACK) WITH SYNC

Your vehicle is equipped with an auxiliary input jack which allows you to

plug in and play your portable music player over the vehicle speakers.

For exact location of your auxiliary input jack, refer to your vehicle’s

Owner’s guide.

To access:

Note: If you already have a device connected to the USB port, you

cannot access the LINE IN feature. Some digital media players require

both USB and LINE IN ports ot stream data and music separately.

1. Ensure that the desired device is plugged into the Auxiliary input jack

and is playing.

2. Press MEDIA on the navigation bezel.

3. Select the USER DEVICE tab.

130

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

4. Press SOURCE repeatedly to until

LINE IN appears in the line above

SOURCE. The music will begin to

play over the vehicle’s speakers.

USING THE MEDIA MUSIC LIBRARY

Once your music has been indexed into SYNC through the USB port, you

can then use the many features of the media library. To access:

1. Press MEDIA on the navigation bezel.

2. Select the USER DEVICE tab.

Press SOURCE repeatedly until USB

appears in the display.

3. Press MUSIC LIBRARY.

From this screen, you can access

the following:

• Play All

• Artists

• Albums

• Genres

• Playlists

• Tracks

• Explore USB

131

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

Accessing the Play All feature

The Play All feature in SYNC will play all indexed media (tracks) from

your playing device in flat file mode, one at a time in alphabetical order.

To access:

1. Press MEDIA on the navigation bezel.

2. Select the USER DEVICE tab.

3. Press SOURCE repeatedly until

USB appears in the display.

4. Press MUSIC LIBRARY.

5. Scroll using / on the

navigation screen to select ‘Play All’.

Selecting and playing specific artists

SYNC allows you to sort all indexed media by artists. To access:

1. Press MEDIA on the navigation bezel.

2. Select the USER DEVICE tab.

3. Press SOURCE repeatedly until

USB appears in the display.

4. Press MUSIC LIBRARY.

5. Scroll using / on the

navigation screen and select

‘Artists’.

132

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

SYNC will allow you to scroll through all indexed artists and select which

you would like to hear.

Selecting and playing specific albums

SYNC allows you to play all indexed media by ALBUMS. To access:

1. Press MEDIA on the navigation bezel.

2. Select the USER DEVICE tab.

3. Press SOURCE repeatedly until

USB appears in the display.

4. Press MUSIC LIBRARY.

5. Scroll using / on the

navigation screen and select

‘Albums’.

6. Use / to scroll through

and select the desired album to play.

Selecting from different genres

SYNC allows you to sort indexed music by genre (category) type. SYNC

will automatically re-categorize your indexed music according to the

available genre metadata tags. To access:

1. Press MEDIA on the navigation bezel.

2. Select the USER DEVICE tab.

3. Press SOURCE repeatedly until

USB appears in the display.

4. Press MUSIC LIBRARY.

133

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

5. Scroll using / on the

navigation screen and select

‘Genres’.

Accessing your playlists

SYNC supports many playlists formats, such as: .ASX, .M3U, .WPL and

.MTP. To access:

1. Press MEDIA on the navigation bezel.

2. Select the USER DEVICE tab.

3. Press SOURCE repeatedly until

USB appears in the display.

4. Press MUSIC LIBRARY.

5. Scroll / using on the

navigation screen and select

‘Playlists’.

6. Scroll using / to select

the desired playlist.

Playing a specific track

SYNC allows you to search for and play a specific track which has been

indexed. To access:

1. Press MEDIA on the navigation bezel.

134

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

2. Select the USER DEVICE tab.

3. Press SOURCE repeatedly until

USB appears in the display.

4. Press MUSIC LIBRARY.

5. Scroll using / on the

navigation screen and select ‘Tracks’

to view your indexed tracks.

6. Scroll using / and select

the desired track to play.

Exploring the USB device

SYNC allows you to explore through all supported digital media on your

media device which is connected through the USB port. To access:

1. Press MEDIA on the navigation bezel.

2. Select the USER DEVICE tab.

3. Press SOURCE repeatedly until

USB appears in the display.

4. Press MUSIC LIBRARY.

5. Scroll using / on the

navigation screen and select

‘Explore USB’.

135

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

6. Use / to scroll through all

indexed media on your USB device.

Note: Media can be played directly

through the Explore USB feature by

selecting the desired track or by

selecting PLAY ALL.

Note: When you are playing USB SYNC MEDIA using the Explore USB

feature, and you have folders saved on your playing device, you are in

folder mode. In folder mode, you can say, “Play next folder” or “Play

previous folder” to advance within your saved folders.

Accessing your BT Devices menu and features

The BT DEVICES menu allows you to connect, add and delete Bluetooth

devices from SYNC.

To access:

1. Press MEDIA on the navigation

bezel.

2. Select the USER DEVICE tab.

3. Press BT DEVICES.

4. Select from available options of:

• CONNECT: Select to connect a

previously paired device to SYNC.

• ADD: Select to add a device

through Discovery and

Discoverable modes. Refer to

Adding a new device in

discovery or discoverable mode

in the following section.

• DELETE: Select to delete a previously paired device.

• ADVANCED: Refer to Advanced Settings in the SYNC phone

features chapter for information on how to make adjustments to

advanced settings.

136

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

Adding a new device in discovery or discoverable mode

1. Press MEDIA on the navigation

bezel.

2. Select the USER DEVICE tab.

3. Press BT DEVICES.

4. Select ADD.

5. If your device supports

discoverable mode, enter the PIN

given by SYNC. If your device

supports discovery mode, press

FIND OTHER DEVICES.

6. Select the desired device.

7. SYNC will take you to the NEW

DEVICE menu. Enter the PIN given

by your device into SYNC via the

touch pad and press ENTER.

137

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


VOICE COMMANDS WHEN USING THE USB PORT

Driving while distracted can result in loss of vehicle control,

accident and injury. Ford strongly recommends that drivers use

extreme caution when using any device that may take their focus off

the road. The drivers primary responsibility is the safe operation of

their vehicle. Only use cell phones and other devices not essential to

the driving task when it is safe to do so.

When using the USB port, you may say “User Device” and, when

prompted, any of the following commands:

• Play all

• Play

• Pause

• What’s playing?

• Similar music

• Play next track

• Play previous track • Play next folder 2

• Shuffle • Play previous folder 2

• Autoplay on

• Autoplay off

• Repeat off

• Repeat on

• Play album • Play playlist 1

• Play genre 1 • Play artist 1

• Play track 1

1 Voice commands are not available until indexing is complete.

2 Voice commands only available in folder mode. For more information,

refer to Exploring the USB device.

Note: In the above possible commands, “name” is a dynamic listing in

that it could be the name of any desired group, artist, etc.

Autoplay: With this feature ON, SYNC will automatically begin to play

your music as it is being indexed. As the system is finishing indexing all

of your songs, you can listen to music. With this feature OFF, SYNC will

not begin to play any of your music until it has all been indexed.

Note: The larger the number of songs SYNC has to index, the longer

indexing will take.

Play Genre: You can play a specific genre (type) of music. SYNC will

read all the data from your indexed music and, if available, will begin to

play that type of music.

Note: You can only play genres of music which are present in the music

you have indexed to SYNC.

Similar music: You can tell SYNC to play music ‘similar’ to what you are

currently playing.

138

SYNC media features

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

Voice commands when in Bluetooth audio mode

When in Bluetooth audio mode, you may use the following

commands:

• Play

• Pause

• Play next track

• Play previous track

Note: Please refer to your device’s user guide to see if these commands

are supported for Bluetooth audio.

At any time, you may say these commands:

• User Device

• Help

• Help

• Phone

• Line in

•Cancel

Voice commands while using Line in

While using the Line in feature (Auxiliary input jack), you may

speak the following commands:

• Cancel

• Line in

ACCESSING SYNC MEDIA FEATURES THROUGH YOUR DVD

SYSTEM (IF EQUIPPED)

Rear seat passengers can listen to SYNC media sources (USB, BT

AUDIO, LINE IN) through the DVD system (if equipped).

To access:

1. Ensure that:

• The DVD and audio system are ON.

• Your digital media playing device is plugged into the USB port or

SYNC’s Auxiliary input jack (Line in), if desired.

139

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

• Your Bluetooth enabled cellular phone from which you wish to stream

music is ON and is currently paired to SYNC as a Bluetooth Device.

2. Ensure that your wireless

headphones are set to Channel A.

(Channel A can access any possible

media source: AM, FM1, FM2, SAT

(satellite radio, if equipped), CD,

DVD, AUX, SYNC (USB, BT AUDIO

and LINE IN). Channel B can only

access DVD and AUX sources.)

3. Press A on the DVD system to

gain access to your possible media

selections.

4. Press MEDIA (on the DVD system or on the remote control)

repeatedly until SYNC appears on the DVD screen in the A status

bar. (You cannot access SYNC through B.) Either press ENTER or

wait until the system times out.

After choosing the SYNC media source, you can then choose from the

media settings (Shuffle, Repeat, Autoplay) as well as choosing from

these options: Play All music, Play Artists, Play Albums, Play Genres,

Play tracks, Explore the USB device or accessing/playing your Playlists.

140

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

You can use the following remote

controls to help make SYNC menu

selections:

• Use the cursor controls

( / / / ) to make menu

selections.

• Press ENTER to confirm a

selection.

• Press / to

reverse/advance to the next track.

Note: Once SYNC USB is chosen, SYNC will begin indexing your media

information. Depending on how much supported media content there is,

this process may take a few minutes. You can, however, choose to

activate the Autoplay feature which will begin playing the first song as

soon as possible so that you will not have to wait until all of the music is

indexed prior to playing.

Media menu

Once you have chosen a SYNC media source from which to play, you can

then make playing selections through the Media Menu.

• From the main screen, select

‘Menu’.

141

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

• Then select ‘Media Menu’ to

choose from:

Play Menu: Choose how to play your SYNC USB media. Access Play All,

Artists, Albums, Tracks, Genres, Playlists and Explore USB.

Select Source: Choose another SYNC media source (USB, BT AUDIO,

LINE IN).

Media Settings: Choose to activate/deactivate Shuffle, Repeat or

Autoplay.

Play menu

The Play Menu gives the choice of how to play music from your SYNC

media source. To access:

• From the main screen, select

‘Menu’.

Select ‘Play Menu’.

142

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

Select from:

Play All: Choose to play all supported media content on your playing

device alphabetically.

Artists: In the Artists screen, you

can select to play All Artists, or you

can select any available artist. Press

the cursor controls

( / / / ) to highlight the

desired choice and press ENTER.

Albums: The Albums screen lists all loaded albums alphabetically. Press

the cursor controls ( / / / ) to highlight the desired choice

and press ENTER.

Genres: The Genre screen lists all available genres. Press the cursor

controls ( / / / ) to highlight the desired choice and press

ENTER.

Playlists: The Playlist screen allows you to view and select from any

previously saved playlists on your playing device. Press the cursor

controls ( / / / ) to highlight the desired choice and press

ENTER.

Tracks: The Track screen lists all tracks in your playing device

alphabetically. Use the scroll bar to advance/reverse in the list. Select to

begin play.

Explore USB : The Explore USB screen allows you to scroll through all

supported media content stored on your device. Press the cursor

controls ( / / / ) to highlight the desired choice and press

ENTER.

143

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

Similar Music The Similar Music screen allows you to play music similar

to what is currently playing from the USB port. The system will use the

metadata information of each song to compile a playlist for you.

Select source menu

The SYNC select source menu screen allows you to choose which SYNC

media source to access.

• From the main screen, select

‘Menu’.

• Choose ‘Select Source’.

Choose from:

• USB: Select to access any

supported device plugged into the

USB port.

• Bluetooth Stereo: Select to

stream audio from your Bluetooth

stereo enabled device over the

vehicle’s speakers.

• Line In: Select to access any

playing device plugged into the Auxiliary input jack (Line in).

144

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC media features

Media settings

The Media Settings screen allows you to turn Shuffle, Repeat and

Autoplay on/off. To access:

• From the main screen, select

‘Menu’.

• Select ‘Media Settings’.

You can now access:

Shuffle: Select to turn Shuffle

on/off. Shuffle will randomly shuffle

all selected music.

Repeat: Select to turn repeat on/off. The repeat feature will repeat the

currently chosen track until turned off.

Autoplay: Select to begin playing USB tracks as soon as possible during

the indexing process. With Autoplay turned off, the chosen USB tracks

will not begin to play until all of the USB tracks have been indexed by

SYNC. Depending on the size of the playable media and the device being

indexed, this may take a few minutes.

145

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC DEVICE END USER LICENSE AGREEMENT (EULA)

You have acquired a device (“DEVICE”) that includes software licensed

by FORD MOTOR COMPANY from an affiliate of Microsoft Corporation

(“MS”). Those installed software products of MS origin, as well as

associated media, printed materials, and “online” or electronic

documentation (“SOFTWARE”) are protected by international intellectual

property laws and treaties. The SOFTWARE is licensed, not sold.

All rights reserved.

The SOFTWARE may be configured to interface with and/or

communicate with, or may be later upgraded to interface with and/or

communicate with additional software systems provided by FORD

MOTOR COMPANY. These additional software systems of FORD MOTOR

COMPANY origin, as well as associated media, printed materials, and

“online” or electronic documentation (“FORD SOFTWARE”) are

protected by international intellectual property laws and treaties.

The FORD SOFTWARE is licensed, not sold. All rights reserved.

IF YOU DO NOT AGREE TO THIS END USER LICENSE

AGREEMENT (“EULA”), DO NOT USE THE DEVICE OR COPY

THE SOFTWARE. ANY USE OF THE SOFTWARE, INCLUDING

BUT NOT LIMITED TO USE ON THE DEVICE, WILL

CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR

RATIFICATION OF ANY PREVIOUS CONSENT).

GRANT OF SOFTWARE LICENSE: This EULA grants you the

following license:

• You may use the SOFTWARE as installed on the DEVICE.

• You may use the FORD SOFTWARE as installed on the vehicle.

DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS:

• Speech Recognition: If the SOFTWARE includes speech recognition

component(s), you should understand that speech recognition is an

inherently statistical process and that recognition errors are inherent

in the process. Neither FORD MOTOR COMPANY nor its suppliers

shall be liable for any damages arising out of errors in the speech

recognition process.

• Limitations on Reverse Engineering, Decompilation and

Disassembly: You may not reverse engineer, decompile, or

disassemble nor permit others to reverse engineer, decompile or

disassemble the SOFTWARE, except and only to the extent that such

activity is expressly permitted by applicable law notwithstanding this

limitation.

146

SYNC End user license agreement

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC End user license agreement

You may not reverse engineer, decompile, or disassemble nor permit

others to reverse engineer, decompile or disassemble the FORD

SOFTWARE, except and only to the extent that such activity is

expressly permitted by applicable law notwithstanding this limitation.

• Single EULA: The end user documentation for the DEVICE may

contain multiple versions of this EULA, such as multiple translations

and/or multiple media versions (e.g., in the user documentation and in

the software). Even if you receive multiple versions of the EULA, you

are licensed to use only one (1) copy of the SOFTWARE and only one

(1) copy of the FORD SOFTWARE.

• SOFTWARE Transfer: You may permanently transfer all of your

rights under this EULA only as part of a sale or transfer of the

DEVICE, provided you retain no copies, you transfer all of the

SOFTWARE (including all component parts, the media and printed

materials, any upgrades, this EULA and, if applicable, the

Certificate(s) of Authenticity), and the recipient agrees to the terms

of this EULA. If the SOFTWARE is an upgrade, any transfer must

include all prior versions of the SOFTWARE.

• Termination: Without prejudice to any other rights, FORD MOTOR

COMPANY or MS may terminate this EULA if you fail to comply with

the terms and conditions of this EULA.

• Security Updates/Digital Rights Management: Content owners use

the WMDRM technology included in your DEVICE to protect their

intellectual property, included copyrighted content. Portions of the

SOFTWARE on your DEVICE use WMDRM software to access

WMDRM-protected content. If the WMDRM software fails to protect

the content, content owners may ask Microsoft to revoke the

SOFTWARE’s ability to use WMDRM to play or copy protected

content. This action does not affect unprotected content. When your

DEVICE downloads licenses for protected content, you agree that

Microsoft may include a revocation list with the licenses. Content

owners may require you to upgrade the SOFTWARE on your DEVICE

to access their content. If you decline an upgrade, you will not be able

to access content that requires the upgrade.

• Consent to Use of Data: You agree that MS, Microsoft Corporation,

their affiliates and/or their designated agent may collect and use

technical information gathered in any manner as part of product

support services related to the SOFTWARE. MS, Microsoft

Corporation, their affiliates and/or their designated agent may use this

information solely to improve their products or to provide customized

services or technologies to you. MS, Microsoft Corporation, their

147

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


affiliates and/or their designated agent may disclose this information to

others, but not in a form that personally identifies you.

• Internet-Based Services Components: The SOFTWARE may

contain components that enable and facilitate the use of certain

Internet-based services. You acknowledge and agree that MS, Microsoft

Corporation, their affiliates and/or their designated agent may

automatically check the version of the SOFTWARE and/or its

components that you are utilizing and may provide upgrades or

supplements to the SOFTWARE that may be automatically

downloaded to your DEVICE.

• Additional Software/Services: The SOFTWARE may permit FORD

MOTOR COMPANY, MS, Microsoft Corporation, their affiliates and/or

their designated agent to provide or make available to you

SOFTWARE updates, supplements, add-on components, or

Internet-based services components of the SOFTWARE after the date

you obtain your initial copy of the SOFTWARE (“Supplemental

Components”).

If FORD MOTOR COMPANY provides or makes available to you

Supplemental Components and no other EULA terms are provided along

with the Supplemental Components, then the terms of this EULA shall

apply.

If MS, Microsoft Corporation, their affiliates and/or their designated agent

make available Supplemental Components, and no other EULA terms are

provided, then the terms of this EULA shall apply, except that the MS,

Microsoft Corporation or affiliate entity providing the Supplemental

Component(s) shall be the licensor of the Supplemental Component(s).

FORD MOTOR COMPANY, MS, Microsoft Corporation, their affiliates

and/or their designated agent reserve the right to discontinue without

liability any Internet-based services provided to you or made available to

you through the use of the SOFTWARE.

• Links to Third Party Sites: The SOFTWARE may provide you with

the ability to link to third party sites through the use of the

SOFTWARE. The third party sites are not under the control of MS,

Microsoft Corporation, their affiliates and/or their designated agent.

Neither MS nor Microsoft Corporation nor their affiliates nor their

designated agent are responsible for (i) the contents of any third

party sites, any links contained in third party sites, or any changes or

updates to third party sites, or (ii) webcasting or any other form of

transmission received from any third party sites. If the SOFTWARE

provides links to third party sites, those links are provided to you only

148

SYNC End user license agreement

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC End user license agreement

as a convenience, and the inclusion of any link does not imply an

endorsement of the third party site by MS, Microsoft Corporation,

their affiliates and/or their designated agent.

• Obligation to Drive Responsibly: You recognize your obligation to

drive responsibly and keep attention on the road. You will read and

abide with the DEVICE operating instructions particularly as they

pertain to safety and assumes any risk associated with the use of the

DEVICE.

UPGRADES AND RECOVERY MEDIA:

If the SOFTWARE is provided by FORD MOTOR COMPANY separate

from the DEVICE on media such as a ROM chip, CD ROM disk(s) or via

web download or other means, and is labeled “For Upgrade Purposes

Only” or For Recovery Purposes Only you may install one (1) copy of

such SOFTWARE onto the DEVICE as a replacement copy for the

existing SOFTWARE, and use it in accordance with this EULA, including

any additional EULA terms accompanying the upgrade SOFTWARE.

INTELLECTUAL PROPERTY RIGHTS: All title and intellectual

property rights in and to the SOFTWARE (including but not limited to

any images, photographs, animations, video, audio, music, text and

“applets,” incorporated into the SOFTWARE), the accompanying printed

materials, and any copies of the SOFTWARE, are owned by MS,

Microsoft Corporation, their affiliates or suppliers. The SOFTWARE is

licensed, not sold. You may not copy the printed materials accompanying

the SOFTWARE. All title and intellectual property rights in and to the

content which may be accessed through use of the SOFTWARE is the

property of the respective content owner and may be protected by

applicable copyright or other intellectual property laws and treaties. This

EULA grants you no rights to use such content. All rights not specifically

granted under this EULA are reserved by MS, Microsoft Corporation,

their affiliates and suppliers. Use of any on-line services which may be

accessed through the SOFTWARE may be governed by the respective

terms of use relating to such services. If this SOFTWARE contains

documentation that is provided only in electronic form, you may print

one copy of such electronic documentation.

All title and intellectual property rights in and to the FORD SOFTWARE

(including but not limited to any images, photographs, animations, video,

audio, music, text and “applets,” incorporated into the FORD

SOFTWARE), the accompanying printed materials, and any copies of the

FORD SOFTWARE, are owned by FORD MOTOR COMPANY. The FORD

SOFTWARE is licensed, not sold. You may not copy the printed materials

accompanying the FORD SOFTWARE. All title and intellectual property

149

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


ights in and to the content which may be accessed through use of the

FORD SOFTWARE is the property of the respective content owner and

may be protected by applicable copyright or other intellectual property

laws and treaties. This EULA grants you no rights to use such content.

All rights in the FORD SOFTWARE not specifically granted under this

EULA are reserved by FORD MOTOR COMPANY. Use of any on-line

services which may be accessed through the FORD SOFTWARE may be

governed by the respective terms of use relating to such services. If the

FORD SOFTWARE contains documentation that is provided only in

electronic form, you may print one copy of such electronic

documentation.

EXPORT RESTRICTIONS: You acknowledge that the SOFTWARE is

subject to U.S. and European Union export jurisdiction. You agree to

comply with all applicable international and national laws that apply to

the SOFTWARE, including the U.S. Export Administration Regulations,

as well as end-user, end-use and destination restrictions issued by U.S.

and other governments. For additional information, see

http://www.microsoft.com/exporting/.

TRADEMARKS: This EULA does not grant you any rights in connection

with any trademarks or service marks of FORD MOTOR COMPANY, MS,

Microsoft Corporation, their affiliates or suppliers.

PRODUCT SUPPORT: Product support for the SOFTWARE is not

provided by MS, its parent corporation Microsoft Corporation, or their

affiliates or subsidiaries. For product support, please refer to FORD

MOTOR COMPANY instructions provided in the documentation for the

DEVICE. Should you have any questions concerning this EULA, or if you

desire to contact FORD MOTOR COMPANY for any other reason, please

refer to the address provided in the documentation for the DEVICE.

No Liability for Certain Damages: EXCEPT AS PROHIBITED BY

LAW, FORD MOTOR COMPANY, MS, MICROSOFT CORPORATION AND

THEIR AFFILIATES SHALL HAVE NO LIABILITY FOR ANY INDIRECT,

SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING

FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF

THE SOFTWARE AND/OR THE FORD SOFTWARE. THIS LIMITATION

SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL

PURPOSE. IN NO EVENT SHALL MS, MICROSOFT CORPORATION

AND/OR THEIR AFFILIATES BE LIABLE FOR ANY AMOUNT IN

EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00).

• THERE ARE NO WARRANTIES OTHER THAN THOSE THAT MAY

EXPRESSLY BE PROVIDED FOR YOUR NEW VEHICLE.

150

SYNC End user license agreement

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC End user license agreement

END USER NOTICE

MICROSOFT WINDOWS MOBILE FOR AUTOMOTIVE IMPORTANT

SAFETY INFORMATION

This system Ford SYNC contains software that is licensed to

Manufacturer FORD MOTOR COMPANY by an affiliate of Microsoft

Corporation pursuant to a license agreement. Any removal, reproduction,

reverse engineering or other unauthorized use of the software from this

system in violation of the license agreement is strictly prohibited and

may subject you to legal action.

Read and follow instructions

Before using your Windows Automotive-based system, read and follow all

instructions and safety information provided in this end user manual

(“User’s Guide”). Not following precautions found in this User’s Guide

can lead to an accident or other serious consequences.

Keep User’s Guide in Vehicle

When kept in the vehicle, the User’s Guide will be a ready reference for

you and other users unfamiliar with the Windows Automotive-based

system. Please make certain that before using the system for the first

time, all persons have access to the User’s Guide and read its

instructions and safety information carefully.

Operating certain parts of this system while driving can distract

your attention away from the road, and possibly cause an

accident or other serious consequences. Do not change system settings

or enter data non-verbally (using your hands) while driving. Stop the

vehicle in a safe and legal manner before attempting these operations.

This is important since while setting up or changing some functions

you might be required to distract your attention away from the road

and remove your hands from the wheel.

General operation

Voice Command Control

Functions within the Windows Automotive-based system may be

accomplished using only voice commands. Using voice commands while

driving allows you to operate the system without removing your hands

from the wheel.

Prolonged Views of Screen

Do not access any function requiring a prolonged view of the screen

while you are driving. Pull over in a safe and legal manner before

151

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


attempting to access a function of the system requiring prolonged

attention. Even occasional short scans to the screen may be hazardous if

your attention has been diverted away from your driving task at a critical

time.

Volume Setting

Do not raise the volume excessively. Keep the volume at a level where

you can still hear outside traffic and emergency signals while driving.

Driving while unable to hear these sounds could cause an accident.

Use of Speech Recognition Functions

Speech recognition software is inherently a statistical process which is

subject to errors. It is your responsibility to monitor any speech

recognition functions included in the system and address any errors.

Navigation Features

Any navigation features included in the system are intended to provide

turn by turn instructions to get you to a desired destination. Please make

certain all persons using this system carefully read and follow

instructions and safety information fully.

Distraction Hazard

Any navigation features may require manual (non-verbal) setup.

Attempting to perform such set-up or insert data while driving can

seriously distract your attention and could cause an accident or other

serious consequences. Stop the vehicle in a safe and legal manner before

attempting these operations.

Let Your Judgment Prevail

Any navigation features are provided only as an aid. Make your driving

decisions based on your observations of local conditions and existing

traffic regulations. Any such feature is not a substitute for your personal

judgment. Any route suggestions made by this system should never

replace any local traffic regulations or your personal judgment or

knowledge of safe driving practices.

Route Safety

Do not follow the route suggestions if doing so would result in an unsafe

or illegal maneuver, if you would be placed in an unsafe situation, or if

you would be directed into an area that you consider unsafe. The driver

is ultimately responsible for the safe operation of the vehicle and

therefore, must evaluate whether it is safe to follow the suggested

directions.

152

SYNC End user license agreement

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC End user license agreement

Potential Map Inaccuracy

Maps used by this system may be inaccurate because of changes in

roads, traffic controls or driving conditions. Always use good judgment

and common sense when following the suggested routes.

Emergency Services

Do not rely on any navigation features included in the system to route

you to emergency services. Ask local authorities or an emergency

services operator for these locations. Not all emergency services such as

police, fire stations, hospitals and clinics are likely to be contained in the

map database for such navigation features.

GLOSSARY OF TERMS

Autoplay: With Autoplay turned ON, SYNC allows you to listen to music

which has already been randomly indexed during the indexing process.

With Autoplay turned off, the chosen music will not begin to play until

all of the music has been indexed by SYNC. Depending on the size of the

material, this may take a few minutes.

Bluetooth enabled cellular phone: Any cellular phone which has the

Bluetooth wireless technology which will enable the phone to connect

with SYNC and exchange information wirelessly.

Digital media player / USB Device: This is a generic term used to

signify any of the following media devices: iPod, Zune, “Plays from

device” players, and most USB drives (thumb drives, flash drives, PEN

drives, etc.)

Discoverable mode: A mode which allows other Bluetooth enabled

devices to find your Bluetooth enabled device.

Discovery mode: A mode which allows your Bluetooth enabled device

to search for other ‘discoverable’ Bluetooth enabled devices.

In-band ringing: This is a phone dependent feature. If your Bluetooth

enabled cellular phone supports this feature, SYNC can play your ring

tone during incoming calls.

Indexing: A process in which SYNC builds a voice recognition grammar

for the media content of your digital media player. While indexing, SYNC

will play already indexed media if Autoplay is on. However, voice

recognition is not available for the media until the indexing process is

complete.

Metadata: Descriptive tags embedded in your digital media which

provide SYNC with information such as ARTIST, ALBUM, GENRE and

TRACK.

153

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


SYNC End user license agreement

Pairing: To use your Bluetooth enabled cellular phone with SYNC, you

must go through a pairing (bonding) process. “Pairing” is a special

process used when two devices connect for the first time. The pairing

process is used to generate a link key that is used for authentication

purposes during subsequent Bluetooth connections between the two

devices.

PIN (Personal Identification number): This six digit number

(sometimes referred to as a passkey) will be shown in the radio display

during the pairing process with your Bluetooth enabled device. You do

not need to write down this number as it will only be used for that

specific pairing procedure.

154

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Index

A

Accessing SYNC system

information ................................117

Accessing your phone book .....104

Accessing your playlists ...........134

Adding a new device in

discovery or discoverable

mode ..................................136–137

Adding a phone .........................107

Address Book -

destination entry .........................53

Address Book - editing ...............67

Advanced settings .....................108

AM/FM .........................................14

Automatically download

your phone book .......................111

Auxiliary input jack

(Line in) ......................................23

Avoid areas ..................................69

C

Call history ................................105

CD ................................................21

Cleaning .......................................90

Cleaning Map DVDs ....................43

Connecting a phone ..................106

Connecting your digital media

player to SYNC ..........................125

D

Date/time settings .......................35

Deleting a phone .......................107

Destination entry ........................49

Destination map ..........................62

Destination way points ...............63

Displays .......................................34

DVD (if equipped) ......................23

E

Exploring the USB device ........135

F

Forwarding a text message ......123

Freeway entrance/exit ................61

G

Glossary .....................................153

GPS reception .............................89

H

Help ..............................................39

How to get going ..........................5

How to get going with

SYNC media ..............................125

Hybrid information

(if equipped) ...............................30

I

Installing new vehicle

applications ...............................117

Intersection .................................60

L

Latest map DVDs ........................42

M

Making a call .............................100

155

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Index

MAP DVD - Loading and

Unloading ....................................41

Map icons ....................................47

Map preferences .........................65

Message notification .................111

Modifying your phone book

and call history .........................112

N

Navigation end user license

agreement ....................................86

Navigation glossary .....................90

O

Ordering additional

map DVDs ...................................43

P

Pairing your phone through

your navigation system ..............99

Performing a master reset .......116

Phone dependent features .........92

Playing a specific track ............134

Point of Interest (POI) ...............55

Previous destination ...................51

Q

Quick destination ........................49

Quick POIs ..................................69

Quick reference chart ................98

Quick touch buttons ...................46

R

Rear seat controls

(if equipped) ...............................28

Replacing contacts in your

Quick Dial locations ..................104

Returning to factory

defaults ......................................115

S

Safety information ......................92

Satellite Radio (if equipped) .....16

Saving a contact or phone

number as Quick Dial ...............103

Security .......................................38

Select route .................................64

Selecting and playing

specific albums ..........................133

Selecting and playing

specific artists ...........................132

Selecting different genres ........133

Setting a ring tone ....................110

Settings ........................................70

Sound features ............................26

Speed compensated volume ......28

Streaming music from

your phone ................................129

Supported player, media

formats and metadata

information ................................129

SYNC media features ................126

SYNC phone features ...............102

SYNC voice recognition

feature .........................................93

System information .....................40

156

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


Index

System introduction .....................4

System limitations ......................89

System overview .........................10

System settings .........................106

T

Text messaging with your

navigation system .....................118

Troubleshooting ..........................83

Turning Bluetooth on/off ..........109

Turning prompts on/off ............114

U

USB port ....................................127

User Device (if equipped) .........23

Using the Auxiliary input jack

(Line in) ....................................130

Using the play all feature .........132

Using the quick dial feature ....103

Using voice commands

with SYNC ...................................94

V

Voice commands in media

mode ..........................................138

Voice commands in phone

mode ..........................................124

Voice recognition ........................71

W

What is SYNC? ............................91

What’s playing? .........................129

157

2008 Pioneer Navigation w/voice recognition (nv1)

Supplement

USA (fus)


158


159


160


8E6J 19A285 AB

October 2007

Second Printing

Owner’s Guide Supplement

Navigation System

Litho in U.S.A.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!