You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>M22</strong> G <strong>HPA</strong> GSP<br />
<strong>M22</strong> SPRAY GUNS<br />
The <strong>M22</strong> <strong>HPA</strong> GSP has our outstanding ergonomic gun body design with a<br />
unique combination pressure/gravity cup for hard to atomize coatings such<br />
as high solids and water-borne materials.<br />
FEATURES<br />
New ergonomics and body design<br />
Reduced trigger pull effort<br />
<br />
<br />
Improved design : the cup is under<br />
pressure during application<br />
Stainless steel wetted parts<br />
Unique aircap design<br />
Fine thread packing unit<br />
E-Z adjust aircap<br />
Reduced number of components<br />
BENEFITS<br />
The operator can focus on the spraying and<br />
applying the material, not the weight and stress<br />
of the gun and cup on their body<br />
Full security during application : cup pressure<br />
<br />
Full operator safety<br />
Compatible with high viscosity materials (water based<br />
<br />
<br />
Fine packing adjustment for improved sealing<br />
Allows adjustment without loosening the retaining ring<br />
Easy maintenance<br />
SPECIFICATIONS<br />
<strong>Spray</strong>ed materials<br />
Varnishes, lacquers, stains, Polyurethanes,<br />
two component<br />
Body of the gun<br />
Anodized forged aluminum<br />
Maximum air inlet pressure<br />
87 psi (6 bar)<br />
Recommended atomization air pressure<br />
27-58 psi (2 - 4 bar)<br />
Maximum cup air pressure<br />
Air consumption<br />
Weight (with cup)<br />
<br />
<br />
Nozzle<br />
Needle<br />
Wetted parts<br />
FITTINGS<br />
<br />
3 /h)<br />
<br />
<br />
<br />
Stainless steel<br />
Stainless steel<br />
Stainless steel<br />
Air inlet<br />
M 1/4" NPS (+ M 1/4" BSP)<br />
Fluid inlet (gravity cup - under pressure) -<br />
AIRCAPS<br />
EN5<br />
CONFIGURATION OF THE <strong>M22</strong> G <strong>HPA</strong> GSP<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
E ESS<br />
<br />
15 EN5 <br />
<br />
<br />
18 EN5 <br />
<br />
22 EN5 <br />
(grey)<br />
<br />
PROJECTORS FOR <strong>M22</strong> G <strong>HPA</strong> GSP SPRAY GUNS<br />
<br />
<br />
in CA 4<br />
<br />
<br />
<br />
Air<br />
<br />
<br />
<br />
Type <br />
<br />
<br />
15 EN5 <br />
<br />
<br />
3 /h)<br />
18 EN5 <br />
22 EN5 (1)<br />
(1) polyacetal end needle<br />
SEAL KITS<br />
<br />
<br />
Seal kit<br />
<br />
Repair kit (includes the seal kit)<br />
<br />
23