Software Developer's Manual Raster Command Reference RJ-4030 ...

5. MCR Command Specifications
5.1. Command details
ESC #1 MCR on command
Description
ASCII: ESC # 1 {n1} {n2} {n3}
Hexadecimal: 1B 23 31 {n1} {n2} {n3}
� Turns on MCR. Does nothing if it is already on.
� Definitions of {n1} through {n3}
{n1}: Set read/response mode
00h: Continuous reading mode
01h: Single reading mode (Reading ends even if it failed)
*Does nothing if none of the above
{n2}: Timeout setting (seconds, 1 (min.) to 255 (max.)); 0 (00h) indicates no timeout.
{n3}: Read track setting
ESC #0 MCR off command
{n3}
- 30 -
Read track
Track3 Track2 Track1
1 (01h) - - ○
2 (02h) - ○ -
3 (03h) - ○ ○
4 (04h) ○ - -
5 (05h) ○ - ○
6 (06h) ○ ○ -
7 (07h) ○ ○ ○
*7 (07h) if other than 1 through 7
ASCII: ESC # 0
Hexadecimal: 1B 23 30
Description
� Turns off MCR. Does nothing if it is already off.
Raster Command Reference
5. MCR Command Specifications