Datasheet: NORAS OR Head Coil 1.5T and 3T to use with SIEMENS ...

noras

Datasheet: NORAS OR Head Coil 1.5T and 3T to use with SIEMENS ...

Datasheet:

NORAS OR Head Coil 1.5T

and 3T to use with SIEMENS

OR Head Holder

Contract product development is one of the

many areas of activity of the Noras Company,

as well as the transformation of innovative ideas

and processes into high quality products.

NORAS OR Head Coil 1.5T and

3T to use with SIEMENS OR Head

Holder

This product, which was developed together

with the companies Brainlab, Siemens und Rapid

Biomed, enables MR supported, neurosurgical

interventions with unmatched precision as well

as minimum limitations for the surgeon.

The Head Holder is to be fixed to various Siemens

OR table tops.

SI7000 to use with Symphony, Sonata OR table

top or the Miyabi transport system

SI7300 to use with the TIM OR table top of the

Espree or Trio

The OR Head Coil mounted in the head clamp

consists of an 8 channel array coil. During the

operation the upper half of the coil is removed

to provide better access to the region of interest

for the surgeon.

(See figure below)

SI7000 with bottom coil

An interface to Brainsuite permits intraoperative

neuronavigation.

A wide selection of operation accessories

may be utilized thanks to individually adapted

interfaces.

Technical Data: see next page

NORAS MRI products GmbH, Leibnizstr. 4, 97204 Höchberg, Germany

Tel.: +49 (0) 931/29927-0; Fax: +49 (0) 931/29927-20; email: info@noras.de; www.noras.de


Technical Data OR-Head Holder and OR Head Coil

NORAS Head Holder

NORAS SI7000

Siemens OR Head Holder

Siemens Part No. 08115201

NORAS SI7300

Siemens OR Head Holder

Siemens Part No. 10092088

The figure right shows the SI7000

and the NORAS 8-Channel Coil

NORAS OR Head Coil

Noras Art. No.: SI7100

Coil with one bottom array SI7120 and one top array SI7110 for 1,5T*

Noras Art. No.: SI7130

Coil with one bottom array SI7120 and two top arrays SI7110 for 1,5T*

Noras Art. No.: SI7200

Coil with one bottom array SI7220 and one top array SI7210 for 3,0T**

Noras Art. No.: SI7230

Coil with one bottom array SI7220 and two top arrays SI7210 for 3,0T**

* 1,5T systems: Siemens Sonata, Symphony, Espree

** 3,0T systems: Siemens Trio A Tim, Verio

Technical Data

OR Head Holder SI7000 and SI7300

(Siemens Part No. 08115201 and 10092088)

Weight kg approx. 7

Skull pin distance max. mm 250

Skull pin distance min. mm 100

NORAS OR Head Coil 1,5T

Weight per array kg approx. 2

Frequency MHz 63,6

NORAS OR Head Coil 3T

Weight per array kg approx. 2

Frequency MHz 123,2

Changes due to technological progress are reserved!

Rev.: 12.05.2009

More magazines by this user
Similar magazines