Moisture Meter - Hygropin

spantec.gmbh.de

Moisture Meter - Hygropin

Moisture Meter - Hygropin Excess moisture in concrete can be tatal to a floor covering installation. To prevent mildew and major demage, the flooring industry requires smart solutions to check surfaces for moisture prior to installing floor coverings or coatings. The Hypropin moisture meter offers the perfect solution to identify and monitor moisture in concret. Due to the small and fast sensor of the moisture meter, diagnosing moisture according to ASTM F2170-09 is quicker and easier than ever before. The relative mumidity test rquires placing a measuring sleeve at a specific depth. This can be done either by drilling a hole or by pre-installing cast holes in fresh concrete. This moisture meter provides the smallest avaiable sensor on the market, minimizing damage to the surface and reducing the installation efforts immensely. Features ■ Depending on the settings this moisture meter is able to display relative humidity, temperature and calculated psychrometric parameters. ■ Fast measuring time ■ Highly integrated sesor with only 5 mm / 0.3" diameter ■ Moisture meter shows trend indicators for each parameter ■ The two independent sensors channels of the moisture meter can measure ambient and concrete characteristics simultaneously. Art-No. Modell Type kg 780 10 000 Hygropin Feuchtigkeitsmessgerät Hygropin Moisture Meter 1,54 more accessories available on request Applications The moisture meter Hygropin can be used in dry as well as in fresh concrete. ■ Drilling an 8 mm hole in the concrete is enough for placing a measuring sleeve ■ The add-on for wet concrete allows pre-installation of measuring sleeves as cast holes in fresh concrete Standardization The following standards can be applied to the moisture meter: ■ CE / EMV ■ EN 61000-6-1 / 6-2 / 6-3 / 6-4 ■ EMV-Richtlinie 2004/108/EG ■ ASTM F2170-09 Standard 2-years limited warrenty on electronic parts of the Hygropin Optional extended warrenty periods up to 3 additional years incl. packing- and transportcosts SPANTEC GmbH In der Scherau 1 86529 Schrobenhausen Tel: 08252 / 97 3415 Fax: 08252 / 97 3420 www.spantec-gmbh.de


Moisture Meter - Hygropin The moisture meter offers two different probes: ■ The in-situ probe measures directly where the moisture hides: below the surface of the concrete ■ The optional ambient probe simplifies capturing the environmental parameters The humidity standard tube allows an easy on-site functional and calibration check of the moisture meter. Hygropin Unit, Artikel Nummer 780 10 000 Hygropin Unit consisting of: - Hygropin Moisture Meter incl. Situ-in probe - Carrying case and accessories (10 measuring probe, USB cable, CD inkl. HygroLink, Documentation) Technical Data Display Unit of the Moisture Meter Battery 9 V alkaline or accumulator Mains Via USB Probe input Two seperate inputs Real time Clock Yes Psychrometric Calculations Yes Interface type USB Memory Max. 10´000 readings Logging interval 5 s to zu 1 h Display Pixel graphic LCD, backlighted Display modes % RH and temperature, date and time % RH, temperature, calculated parameter Dimension 270 x 70 x 30 mm (10.63 x 2.76 x 1.17") IP classification IP 40 In-situ probe of the Moisture Meter Measuring range Accuracy Dimension Ø 5 mm (Ø 0.2") Cable length 200 cm (79") 0 to 100% RH - 40° C to 85° C (- 40° F to 185° F) +- 1.5% RH / +- 0.3 K Standard 2-years limited warrenty on electronic parts of the Hygropin Optional extended warrenty periods up to 3 additional years incl. packing- and transportcosts SPANTEC GmbH In der Scherau 1 86529 Schrobenhausen Tel: 08252 / 97 3415 Fax: 08252 / 97 3420 www.spantec-gmbh.de

More magazines by this user
Similar magazines