Rittal â Small Enclosures

R 

Rittal – Small Enclosures 

Fast and perfect, 

with an exceptionally diverse 

range of system accessories

The original is still the 

best! 

Packaging technology for the future 

Whether you require enclosures for tough industrial 

environments or for telecommunications, Rittal has the right 

solution to suit any application. With our extensive range of 

accessories, even individual configuration requirements 

can be met cost-effectively and to optimum effect. 

2 Rittal Small Enclosures

Rittal small enclosures owe their phenomenal success to a host of decisive benefits: 

Perfectly coordinated sizes, designs and materials, mass production quality, plus the diversity of matching 

system accessories. At Rittal, reliable protection against corrosion, fast global availability and international 

approvals come as standard. 

Polycarbonate 

enclosures PK from page 4 

With metric knockouts . . . . . . . . . . . . . . . . . . . . . . 6 

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

Cast aluminium 

enclosures GA from page 9 

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 

Terminal boxes KL from page 13 

Without gland plate, depth 80/120 . . . . . . . . . . . . 13 

With gland plate, depth 120 . . . . . . . . . . . . . . . . . 14 

Stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 

Premium Line KL from page 16 

Protection category IP 69K, stainless steel . . . . . 16 

E box EB from page 17 

RiLAN Industrial from page 18 

Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 

Junction boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 

Bus enclosures BG from page 22 


Compact enclosures AE from page 27 

Width: 200 – 600, height: 300 – 400 . . . . . . . . . . 27 

Width: 380 – 800, height: 500 – 1000 . . . . . . . . . 28 

Width: 600 – 1000, height: 760 – 1400 . . . . . . . . 29 

Protection category IP 69K . . . . . . . . . . . . . . . . . 30 


Plastic 

enclosures KS from page 32 

Width: 200 – 500, height: 300 – 600 . . . . . . . . . . 32 

Width: 600 – 1000, height: 600 – 1000 . . . . . . . . 33 

Compact system enclosures 

Rittal CM from page 34 

Width: 600 – 1200, height: 800 – 1400 . . . . . . . . 34 

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 

CS Outdoor from page 39 

CS wall-mounted enclosures . . . . . . . . . . . . . . . . 39 

System accessories from page 40 

Smart solutions to the last detail 

The answer is in the detail, and this is where Rittal comes 

into its own. 

• Time-saving quick-release fasteners 

• Multi-folded enclosure protection channel to guard 

against dirt and water 

• Twin seals on the doors of the KS range 

• Sophisticated attachment and mounting options 

All these solutions are designed to save our customers 

time and money. 

Rittal Small Enclosures 

3

Polycarbonate enclosures PK 

T1 

T1 

H1 

H1 

B1 

B1 

1 2 

1 2 

Material: 

Grey enclosure and cover 

(version .000) from 

fibreglass-reinforced 

polycarbonate, transparent 

cover (version .100) from 

polycarbonate, cover screws 

from polyamide, insulating 

bungs from polyethylene. 

Colour: 

RAL 7035 

Protection category: 

IP 66 to EN 60 529/10.91 

Supply includes: 

Enclosure and cover, 

cover screws, 

insulating bung for wall 

mounting screws (not with 

9530.000 and 9531.000), 

all-round foamed-in 

PU seal. 

Approvals: 

● Bureau Veritas 

Width (B1) in mm 50 50 65 65 94 94 94 94 

Height (H1) in mm 52 65 65 65 65 65 94 94 

Depth (T1) in mm 35 35 57 81 57 81 57 81 

1 

Model No. PK 

with cable gland 

9530.000 9531.000 – – – – – – 

Model No. PK 

with grey cover 

– – 9500.000 9501.000 9502.000 9503.000 9504.000 9505.000 

2 

Model No. PK 

with transparent cover 

– – – – – – 9504.100 – 

Packs of 10 10 12 12 8 8 6 6 

Width (B1) in mm 110 110 130 130 130 130 180 180 

Height (H1) in mm 110 110 94 94 130 130 94 94 

Depth (T1) in mm 66 90 57 81 75 99 57 81 

Model No. PK 

with grey cover 

9506.000 9507.000 9508.000 9509.000 9510.000 9511.000 9512.000 9513.000 

2 

Model No. PK 

with transparent cover 

9506.100 9507.100 9508.100 9509.100 9510.100 9511.100 9512.100 9513.100 

Packs of 6 6 4 4 4 4 2 2 

Polycarbonate enclosures – accessories from page 7 General accessories from page 40 



T1 

H1 

B1 

Material: 

Grey enclosure and cover 

(version .000) from 


polycarbonate, transparent 

cover (version .100) from 

polycarbonate, cover screws 

from polyamide, insulating 

bungs from polyethylene. 

Colour: 

RAL 7035 


IP 66 to EN 60 529/10.91 


Enclosure and cover, 

cover screws, 

insulating bungs for wall 

mounting screws, 


PU seal. 

Approvals: 


Width (B1) in mm 180 180 180 182 182 182 

Height (H1) in mm 110 110 110 180 180 180 

Depth (T1) in mm 90 111 165 90 111 165 

Model No. PK with grey cover 9514.000 9515.000 9516.000 9517.000 9518.000 9519.000 

Model No. PK with transparent cover 9514.100 9515.100 9516.100 9517.100 9518.100 9519.100 

Packs of 2 2 2 1 1 1 

Width (B1) in mm 254 254 254 360 360 

Height (H1) in mm 180 180 180 254 254 

Depth (T1) in mm 90 111 165 111 165 

Model No. PK with grey cover 9520.000 9521.000 9522.000 9523.000 9524.000 

Model No. PK with transparent cover 9520.100 9521.100 9522.100 9523.100 9524.100 

Packs of 1 1 1 1 1 

Turn-lock fastener 

A quick, convenient screw fastening aid is 

obtained by clipping into the head of the lid 

screw. 

Material: 

Polyamide 

For all 

enclosures 


1 pack 

Packs of 

Model No. PK 

100 9582.000 



5


With metric knockouts 

T1 

H1 

B1 

Material: 

Grey enclosure and lid of 


polycarbonate, lid screws of 

polyamide, insulating bung 

of polythene. 

Colour: 

RAL 7035 


IP 66 to EN 60 529 


Enclosure and lid, 

cover screws, 

insulating bungs for wall 

mounting screws, 


PU seal. 

Approvals: 


Width (B1) in mm 65 130 180 254 

Height (H1) in mm 65 94 110 180 

Depth (T1) in mm 57 57 90 111 

Model No. PK 9500.050 9508.050 9514.050 9521.050 

Packs of 12 4 2 1 

PK 9500.050 PK 9508.050 

PK 9514.050 PK 9521.050 

M16/20 

M20 

M20/25 

M25/32 

M32/40 



Mounting plate 

For individual configuration of the enclosure 

interior, the mounting plate offers a stable, 

secure and flexible design option. 


Accessories 

Design: 

Melamine phenol-coated laminated paper, 

2.5 mm thick. 

Colour: 

RAL 7035 


Self-tapping assembly screws. 

To fit 

Width Height 

mm mm 

Packs of Model No. PK 

PK 9500.000 / PK 9501.000 45 45 12 9540.000 1) 

PK 9502.000 / PK 9503.000 74 45 12 9541.000 1) 

PK 9504.000 / PK 9505.000 74 74 12 9542.000 1) 

PK 9506.000 / PK 9507.000 90 90 12 9543.000 1) 

PK 9508.000 / PK 9509.000 110 74 12 9544.000 1) 

PK 9510.000 / PK 9511.000 110 110 10 9545.000 

PK 9512.000 / PK 9513.000 160 74 10 9546.000 

PK 9514.000 / PK 9515.000 

PK 9516.000 

150 90 10 9547.000 

PK 9517.000 / PK 9518.000 

PK 9519.000 

150 150 10 9548.000 

PK 9520.000 / PK 9521.000 

PK 9522.000 

220 150 8 9549.000 

PK 9523.000 / PK 9524.000 331 220 4 9550.000 

1) with spacers 


for polycarbonate enclosures 

● PK 9530.000 

● PK 9531.000 

Via a 3-way depth-adjustable assembly 

component, the mounting plate may also be 

used as an inner cover for installed 

equipment. 

For enclosure Packs of Model No. PK 

9530.000 10 9551.000 

9531.000 10 9552.000 

Material: 

Polycarbonate 


Assembly parts. 

Hinges 

For hinged attachment of lids. 

The supplied drilling template ensures 

problem-free assembly. 


1 set = 

2 hinges, 

4 assembly screws, 

3 polyethylene sealing bungs, 

1 drilling template. 

For enclosure Material Packs of Model No. PK 

PK 9500.000 – PK 9513.000 Polycarbonate 10 sets 9580.000 

PK 9514.000 – PK 9524.000 Polystyrene 10 sets 9581.000 

External mounting bracket 

To fit enclosure 

● PK 9530.000 

● PK 9531.000 

With moulded lug for cable tie. 

Material: 

Polyamide 


10 9553.000 




7


Accessories 

Wall mounting brackets 

The enclosure can be screwed to the wall 

using four wall mounting brackets. The 

bracket is securely attached to the 

enclosure by means of pins. 

Material: 

Polyamide, grey 

For all 

enclosures 


1 pack 

Packs of 

Model No. PK 

40 9583.000 

The assembly screw is located in 

the wall mounting bracket, 

making it accessible at all times. 

The wall mounting bracket may 

be fitted to the side or top. 

90˚ 

12.5 

A 

12.5 

12.5 

A 

Wall attachment can also be made directly 

without the bracket: 

Variant 1 

Wall attachment in the 

cover screw channel is 

a simple, secure means of 

attachment. 

M4 

M5 

Variant 2 

By knocking out the hole in the 

enclosure base, mounting in the 

enclosure interior is also 

possible. 

The screws must be concealed 

using the sealing bungs supplied 

with the enclosure. The spacing 

between the attachment holes is 

marked on the rear panel of the 

enclosure. 

Support rail 

The two support rail sections provide good 

flexibility for accommodating terminal blocks 

and installed components. 

Design: 

The support rails are designed in 

accordance with EN 50 045 (TS 15/5.5) or 

EN 50 022 (TS 35/7.5); the surface finish is 

zinc-plated. 


Two self-tapping assembly screws. 

Rail 

Maximum number of terminals 

with the following terminal sizes Bar length 

mm 

2.5 mm 2 4 mm 2 10 mm 2 


5 5 4 49.5 12 9560.000 

TS 15/5.5 

11 11 8 80 12 9561.000 

14 14 10 92 12 9562.000 

18 18 13 111 12 9563.000 

12 9 5 81 12 9564.000 

17 13 8 106 12 9565.000 

TS 35/7.5 24 20 11 144 12 9566.000 

38 32 19 216 12 9567.000 

61 50 30 336 12 9568.000 

Calculation of the maximum number of terminals is based on two end holders and a cover. 


Cast aluminium enclosures GA 

T1 

H1 

B1 

Material: 

Enclosure and lid made from 

cast aluminium, lid with 

neoprene cord seal. 

Surface finish: 

Smooth spray finish similar to 

RAL 7001 


IP 67 to EN 60,529 / 10.91, 

complies with NEMA 4. 


2 or 4 cover screws, captive 

mounted, 

2 or 4 screws for the 

attachment of support rails, 

mounting plates etc., 

1 screw for connection of the 

PE conductor. 

Rittal service: 

Individual standard solutions 

for enclosures and covers 

● Hole drilling 

● Thread tapping 

● Milling 

● Screen printing 

● Engraving 

● Choice of RAL colours 

and other surface finishes 

available on request. 

Width (B1) in mm 50 58 98 150 75 125 175 250 122 

Height (H1) in mm 45 64 64 64 80 80 80 80 120 

Depth (T1) in mm 30 36 36 36 57 57 57 57 80 

Model No. GA 9100.210 9101.210 9102.210 9103.210 9104.210 9105.210 9106.210 9107.210 9108.210 

Packs of 6 5 3 2 1 1 1 1 1 

Width (B1) in mm 220 360 160 260 360 200 280 330 330 

Height (H1) in mm 120 122 160 160 160 230 230 230 230 

Depth (T1) in mm 90 80 90 90 90 110 110 110 180 

Model No. GA 9110.210 9111.210 9112.210 9113.210 9114.210 9116.210 9117.210 9118.210 9119.210 

Packs of 1 1 1 1 1 1 1 1 1 

Cast aluminium enclosures – accessories from page 10 General accessories from page 40 


9


Accessories 


for universal interior installation. 

Material: 

Sheet steel, zinc-plated, passivated, with 

attachment holes. 

Exterior dimensions (mm) 

Width Height 

For enclosure Packs of Model No. GA 

114 69 GA 9105.210 10 9105.700 

164 69 GA 9106.210 10 9106.700 

239 69 GA 9107.210 5 9107.700 

109 107 GA 9108.210 2 9108.700 

207 107 GA 9110.210 2 9110.700 

347 107 GA 9111.210 2 9111.700 

144 142 GA 9112.210 2 9112.700 

245 142 GA 9113.210 2 9113.700 

346 142 GA 9114.210 1 9114.700 

183 214 GA 9116.210 1 9116.700 

264 214 GA 9117.210 1 9117.700 

314 214 

GA 9118.210 

GA 9119.210 

1 9118.700 

Support rail 

To accommodate terminal blocks or other 

installed equipment. 

Material: 

Sheet steel, zinc-plated, passivated, with 

attachment holes. 

Rail 

TS 15/5.5 

to 

EN 50 045 

TS 35/7.5 

to 

EN 50 022 

Maximum number of terminals 

with the following terminal sizes 

2.5 mm 2 4 mm 2 10 mm 2 

TS 15/5.5 TS 35/7.5 

Rail length 

available for 

population 

mm 

35 

For 

enclosure 

width 

mm 

Packs Model No. 

of GA 

15 15 12 95 125 10 9105.150 

27 22 19 145 175 10 9106.150 

42 35 29 220 250 10 9107.150 

12 12 9 80 122 5 9108.350 

18 18 14 115 160 5 9112.350 

25 25 18 155 200 5 9116.350 

29 29 21 180 220 5 9110.350 

34 34 26 215 260 5 9113.350 

37 37 28 230 280 5 9117.350 

46 46 35 290 330 5 9118.350 

51 51 39 320 360 5 9111.350 

15 

1 

1 

10.5 

5.5 

7.5 

27 



Accessories 

Wall mounting bracket 

For external mounting to surfaces – no need 

to dismantle the lid if pre-assembled. 

Material: 

Sheet steel, zinc-plated, passivated 

For 

enclosures 

GA 9108.210 

GA 9110.210 

GA 9111.210 

GA 9112.210 

GA 9113.210 

GA 9114.210 

GA 9116.210 

GA 9117.210 

GA 9118.210 

GA 9119.210 

Packs of Model No. GA 

2 9121.122 

2 9121.160 

2 9121.230 

Hinge, exterior 

For fastening the lid to the enclosure base, 

complete with drilling template. 

Material: 

Die-cast aluminium 

Colour: 

RAL 7001 

For 

enclosures 

GA 9105.210 

GA 9106.210 

GA 9107.210 

GA 9108.210 

GA 9110.210 

GA 9111.210 

GA 9112.210 

GA 9113.210 

GA 9114.210 

GA 9116.210 

GA 9117.210 

GA 9118.210 

GA 9119.210 

Packs of 

2 

+ 8 screws 

2 

+ 8 screws 

Model No. GA 

9123.100 

9123.000 

Cover screws, 

prepared for lead seal 

to protect against unauthorised opening. 

Two per cover are required. 

Material: 

Stainless steel 

For 

enclosures 

GA 9104.210 

GA 9105.210 

GA 9106.210 

GA 9107.210 

Packs of 

Model No. GA 

6 9122.424 


11

A very 

special “twist”! 

New and practical: The lid may be opened or reliably sealed in a flash, with the new quick-action 

screw. A 1/4 rotation instead of x number of tapped threads additionally ensures optimum 

contact pressure for the seal. 

This improvement will be added to the following products 

– Terminal boxes KL, page 13, KL stainless steel, page 15 

– Bus enclosures BG, based on KL, page 22, BG stainless steel, page 26 

for even greater time and cost savings during assembly and servicing. 


Terminal boxes KL 

Without gland plate, depth: 80/120 

T1 

H1 

B1 

Material: 

Enclosure: 

Sheet steel 1.25 mm; 

1.38 mm for KL 1507.510 to 

KL 1513.510 

Cover: 

Sheet steel 1.25 mm 


Case and cover: 

Dipcoat primed, 

powder-coated on the 

outside in textured RAL 7035 


IP 66 to EN 60 529/10.91, 



Enclosure, cover with allround 

foamed-in PU seal 

and quick-action screws, 

including plastic bushes. 

Approvals: 

● UL 

● CSA 

● TÜV 

● Germanischer Lloyd 

● Norske Veritas 

● Russian Maritime Register 

of Shipping 

● Lloyds Register 

of Shipping 


● VDE 

Depth 80 mm 

Width (B1) in mm P. of 150 200 200 300 300 400 600 

Height (H1) in mm 150 150 200 150 200 200 200 

Depth (T1) in mm 80 80 80 80 80 80 80 

Model No. KL 1 1514.510 1528.510 1516.510 1515.510 1517.510 1518.510 1519.510 

Weight (kg) 1.4 1.6 1.9 2.1 2.6 3.2 4.6 

Depth 120 mm 

Width (B1) in mm P. of 150 200 200 300 300 300 400 400 400 

Height (H1) in mm 150 150 200 150 200 300 150 200 300 

Depth (T1) in mm 120 120 120 120 120 120 120 120 120 

Model No. KL 1 1500.510 1529.510 1502.510 1501.510 1503.510 1507.510 1589.510 1504.510 1508.510 

Weight (kg) 1.6 1.8 2.3 2.6 3.0 4.0 3.2 3.6 4.8 

Width (B1) in mm P. of 400 500 500 600 600 600 800 800 

Height (H1) in mm 400 200 300 200 300 400 200 400 

Depth (T1) in mm 120 120 120 120 120 120 120 120 

Model No. KL 1 1511.510 1505.510 1509.510 1506.510 1510.510 1512.510 1527.510 1513.510 

Weight (kg) 6.2 4.4 5.8 5.7 6.8 8.4 6.8 11.0 

To order terminal boxes in textured RAL 7032 please add extension .210 to the Model No., and for primed terminal 

boxes use extension .310. Delivery times available on request. 

Cover retainer 

The cover retainer is easily 

fitted without drilling, and 

allows the covers to be 

opened upwards, even when 

the terminal box below is 

bayed. 

Cover hinge 

The cover hinge is simply 

screwed to the box 

protection channel and to 

the edge fold. 

German patent 

no. P 33 40 491 

Packs of Model No. KL 

3 pairs 1591.000 

Packs of Model No. KL 

6 1592.000 

General accessories from page 40 


13


With gland plate, depth 120 

T1 

T1 

H1 

H1 

B1 

B1 

Material: 

Enclosure: 

Sheet steel 1.38 mm; 

1.25 mm for KL 1530.510 to 

KL 1534.510 and 

KL 1542.510 

Cover: 

Sheet steel 1.25 mm 







IP 55 to EN 60 529/10.91, 



Enclosures with gland 

apertures, cover with 

foamed-in special seal and 

quick-action screws 

including plastic bushes, 

sheet steel gland plates with 

seals and assembly parts. 

Approvals: 

● UL 

● CSA 

● TÜV 




of Shipping 


of Shipping 


● VDE 

Width (B1) in mm Packs of 300 300 300 400 400 400 

Height (H1) in mm 150 200 300 200 300 400 

Depth (T1) in mm 120 120 120 120 120 120 

Model No. KL 1 1530.510 1531.510 1535.510 1532.510 1536.510 1539.510 

Weight (kg) 2.7 3.3 4.5 4.0 5.2 6.7 

Gland plate 

(top + bottom) 

1 + 1 1 + 1 1 + 1 1 + 1 1 + 1 1 + 1 

Gland plate 

(left + right) 

– – 1 + 1 – 1 + 1 1 + 1 

Width (B1) in mm Packs of 500 500 600 600 600 800 800 

Height (H1) in mm 200 300 200 300 400 200 400 

Depth (T1) in mm 120 120 120 120 120 120 120 

Model No. KL 1 1533.510 1537.510 1534.510 1538.510 1540.510 1542.510 1541.510 

Weight (kg) 4.9 5.2 5.9 7.7 9.0 7.2 12.0 

Gland plate 

(top + bottom) 

2 + 2 2 + 2 2 + 2 2 + 2 2 + 2 3 + 3 3 + 3 

Gland plate 

(left + right) 

– 1 + 1 – 1 + 1 1 + 1 – 1 + 1 







T1 

H1 

B1 

Material: 

Stainless steel 1.4301 

(AISI 304) 

Enclosure: 1.25 mm 

Cover: 1.25 mm 



Brushed, grain 180 


IP 66 to EN 60 529/10.91, 

complies with NEMA 4X 


Enclosure, cover with allround 

foamed-in PU seal 

and quick-action screws, 

including plastic bushes. 

Approvals: 

● UL 

● CSA 

● TÜV 




of Shipping 


of Shipping 


● VDE 

Width (B1) in mm Packs of 150 300 200 300 400 300 

Height (H1) in mm 150 150 200 200 200 300 

Depth (T1) in mm 80 80 80 80 120 120 

Model No. KL 1 1521.010 1522.010 1523.010 1524.010 1525.010 1526.010 

Weight (kg) 1.3 1.8 1.8 2.4 3.6 3.9 

Quick-action screws 4 4 4 4 4 4 

To order terminal boxes in 1.4404 (AISI 316L), please add extension .510 to the Model No. 

Delivery times available on request. 



15

Premium Line KL 

Protection category IP 69K, stainless steel 

T1 

H1 

B1 

A new design, a new 

concept for the seal and 

lock 

● Resistant to highpressure 

cleaning 

(protection category 

IP 69K). The seal lies 

between two seals and is 

ideally compressed by the 

screw fastening. 

● Suitable for clean room 

use. 

Optional screw fastening 

to comply with high 

standards in the food and 

hygiene sectors: 

1 external with hex screws 

2 internal with plastic 

stoppers 

● Optimum 

EMC conditions. 

The labyrinthine seal 

achieves a particularly 

high level of RF shielding 

of the enclosure. 

● Accessibility. 

Internal rear panel bracket. 

This solution is clearly 

superior to external hinges 

from a hygiene point of 

view. 

● Wall mounting can be 

implemented directly from 

the rear using M8 pull-in 

nuts, or from the front 

using wall mounting 

brackets. 

Material: 


(AISI 304), 1.5 mm 




IP 69K to 

DIN 40 050-9/5.93 


Other sizes and other 

enclosures with this sealing 

concept are available on 

request. 

Cut-outs and drilled holes to 

your specifications. 

Width (B1) in mm Packs of 150 150 300 400 

Height (H1) in mm 150 150 200 300 

Depth (T1) in mm 80 120 120 120 

Model No. KL 1 1024.010 1024.020 1024.030 1024.040 

Quick-action screws 4 4 6 10 

To order Premium Line KL in 1.4404 (AISI 316L), please add extension .5X0 to the Model No. 




E-Box EB 

F1 

T1 

H1 

G1 

B1 

Material: 

Sheet steel 


1.38 mm for 

EB 1555.500, 

EB 1556.500, 

EB 1577.500 to 

EB 1579.500 


Enclosure and door: 




Mounting plate: Zinc-plated 


IP 66 to EN 60 529/10.91 


Enclosure with mounting 

plate, 

door including 180° hinges 

and cam lock with double-bit 

insert. 

Approvals: 

● UL 

● CSA 

● TÜV 




of Shipping 


of Shipping 


● VDE 

Depth 80 mm 

Width (B1) in mm P. of 150 150 200 200 200 

Height (H1) in mm 150 300 200 300 400 

Depth (T1) in mm 80 80 80 80 80 

Mtg. plate width (F1) mm 125 125 175 175 175 

Mtg. plate height (G1) mm 135 285 185 285 385 

Model No. EB 1 1551.500 1545.500 1546.500 1552.500 1547.500 

Weight (kg) 1.7 2.6 2.4 3.2 4.4 

Depth 120 mm 

Width (B1) in mm P. of 150 150 200 200 200 300 300 200 

Height (H1) in mm 150 300 200 300 400 300 400 500 

Depth (T1) in mm 120 120 120 120 120 120 120 120 

Mtg. plate width (F1) mm 125 125 175 175 175 275 275 175 

Mtg. plate height (G1) mm 135 285 185 285 385 285 385 485 

Model No. EB 1 1553.500 1548.500 1549.500 1554.500 1550.500 1555.500 1556.500 1557.500 

Weight (kg) 2.0 3.0 2.8 3.6 5.0 5.0 6.4 6.2 

Depth 155 mm 

Width (B1) in mm P. of 300 300 300 

Height (H1) in mm 400 600 800 

Depth (T1) in mm 155 155 155 

Mtg. plate width (F1) mm 275 275 275 

Mtg. plate height (G1) mm 385 585 785 

Model No. EB 1 1577.500 1578.500 1579.500 

Weight (kg) 7.1 11.0 13.2 

Lock systems 

Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 47, 

lock cylinder inserts, plastic handles and T handles, type B, see page 47/48. 





17

RiLAN Industrial 

Enclosures 

760 

210 

480 

600 

140 

Empty enclosure for industrial 

distributor 

W x H x D: 600 x 760 x 210 mm 

Offers space for Ethernet connection of 24 

subscribers with patch panel. 

Material: 

Sheet steel 



Dipcoat primed, powder-coated in textured 

RAL 7035 on the outside, 



IP 56/54 to EN 60 529 

(depending on the gland plate fitted). 


Enclosure, one-door, without gland plate in 

the enclosure base, r/h door hinge, with 

2 cam locks, polycarbonate viewing panel, 

foamed-in door seal, mounting plate. 

Packs of 

Model No. IN 

1 1076.290 1) 

1) Stainless steel and plastic versions 

available on request. 

Accessories: 

Metal gland plate 


Page 

of IN 

Solid 1 2563.150 20 

Pre-punched 1 2203.010 20 

With cable glands 1 2203.020 20 

With grommets 1 2203.030 20 


Mounting of components available from 

Rittal. 

Cut-outs e. g. for 

interface flaps, see page 69 and 

signal pillars, see Catalogue 31, page 1041. 

300 

535 

125 

120 

600 

110 

50 

Empty enclosure for industrial 

distributor 

W x H x D: 600 x 300 x 125 mm 

Provides space for Ethernet connection of 

● up to 24 users without patch panel 

● up to 12 users with patch panel. 

Material: 

Sheet steel 



Dipcoat primed, powder-coated in textured 

RAL 7035 on the outside 


IP 65 to EN 60 529 

(with fitted gland plate) 


Enclosure, without gland plate in the 

enclosure base, lid hinged at the bottom, 

opening angle of lid limited to 90° by a 

retaining cord, 3 quick-release fasteners for 

screwdrivers, polycarbonate viewing panel, 

foamed-in lid seal, 2 fitted support rails 

TS 35/7.5 (590 and 150 mm long), 3 fitted 

cable shunting rings DK 7112.000. 

Packs of 

Model No. IN 

1 1510.280 

Accessories: 



Page 

of IN 

Solid 1 2207.010 20 

Pre-punched 1 2207.020 20 

With cable glands 1 2207.030 20 


Mounting of components available from 

Rittal. 

Cut-outs e. g. for 

interface flaps, see page 69 and 

signal pillars, see Catalogue 31, page 1041. 



Junction boxes 

Junction box IP 67 

Plastic 

Junction box with PROFINET-compatible 

RJ 45 connector. For use in areas with more 

demanding requirements in terms of 

protection category, such as 

● Industrial plant 

● Warehouses and assembly halls 

● Laboratories and workshops 

Design: 

● Robust enclosure for surface-mounting 

● 2 RJ 45 jacks for cable AWG 22 – 24 

(solid/flexible), Category 6 to 

ISO/IEC 11801:2002 and EN 50 173-1 

● Cable infeed from above or below via 

cable glands 

● Integral cable manager for secure cable 

routing 

● Insulation stripping aid 

● Protective flaps, captive, self-closing 

● Option for adding a lead seal 

● Watertight label panel. 

Packs of 

Model No. IN 

1 2203.500 

Dimensions: 

W x H x D: 90 x 152 x 69 mm 

Material: 

Polycarbonate, impact-resistant, halogenfree, 

UL 94-V0 

Colour: 

RAL 9011 


IP 67 to EN 60 529 


Enclosure with cable manager, 

2 RJ 45 jacks, 2 cable glands, 

1 sealing bung, assembly instructions. 

Junction box IP 65 


Robust junction box for use in areas with 

more demanding requirements in terms of 

protection category and impact resistance. 

The RJ 45 connector is recommended by 

the IAONA. 

Design: 

● Robust enclosure for surface-mounting 

● 2 side slots RJ 45 (right) 

Category 5 to ISO/IEC 11801:2002 and 

EN 50 173-1 

● Connection via LSA connection strips on 

PCB 

● Cable infeed via two M20 cable glands, 

capacity 5 – 13 mm. 

Packs of 

Model No. IN 

1 2203.600 

Dimensions: 

W x H x D: 80 x 125 x 57 mm (enclosure 

only) 

Material: 


Colour: 

RAL 7035 


IP 65 EN 60 529 


Enclosure with PCB and integral 

RJ 45 jacks, 2 cable glands M20, 

1 sealing bung. 


19


Accessories 

Metal gland plates 

solid/prepunched/ 

with cable glands 

Design: 

● Solid 

● With 27 prepunchings for cable glands 

M20 x 1.5. 

Simply knock out the holes using a 

screwdriver. 

● With 27 polyamide cable glands 

M20 x 1.5. 

Material: 

Sheet steel 

Colour: 

Textured RAL 7035 


IP 66 to EN 60 529 

when mounting in the usual position, bottom. 

For IN 

1076.290 

534 x 149 

mm 

For IN 

1510.280 

555 x 92 

mm 

Design 


of IN 

Solid 1 2563.150 

Pre-punched 1 2203.010 

With cable 

glands 

1 2203.020 

Design 


of IN 

Solid 1 2207.010 

Pre-punched 1 2207.020 

With cable 

glands 

1 2207.030 

Accessories: 

Sealing bungs for sealing any cable glands 

that are not required, see page 66. 

Cable glands M20 x 1.5, see page 65. 


Cutouts for other interfaces. 


with grommets 

Design: 

Including 4 inserts each with 8 grommets for 

cable diameters up to 13 mm. 

Material: 

Gland plate: Sheet steel, zinc-plated, 

passivated 

Cable entry grommet: 

Body: Polypropylene. 

Cover: Thermoplastic elastomer. 


IP 54 to EN 60 529 

when mounting in the usual position, bottom. 

For IN 1076.290 Packs of Model No. IN 

534 x 149 mm 1 2203.030 



Accessories 

Patch panels 

With slots, prepared for cable clamping with 

cable ties SZ 2597.000. 

Design: 

Suitable for direct attachment on mounting 

plates and, by using mounting clip 

SZ 2309.000, also on support rails. 

Material: 




Accessories: 

Mounting clip SZ 2309.000 

see page 53. 

Cable tie SZ 2597.000 

see page 68. 

Manufacturer Usable modules 

Packs Model No. IN 

of 1 slot 2 slots 8 slots 

ADC KRONE RJ 45 KM8 STP 1 – 2203.260 2203.270 

BTR RJ 45 E-DAT module 8 (8) Cat. 6 1 – 2203.200 2203.210 

Corning Cable RJ 45 FutureCom TM S250 

Systems module 

1 – 2203.220 2203.230 

Dätwyler 

RJ 45 unilan ® module MS 1/8 

Cat. 6 

1 – 2203.200 2203.210 

Reichle & De- 

Massari (R&M) 

Tyco Electronics 

Corporation 

(AMP 

NETCONNECT) 

RJ 45 connection module 

Cat. 5e and Cat. 6, 

fibre-optic couplings SC-RJ 

and E2000 TM Compact 

(via module recess) 

RJ45 SL series 

(Toolless Jacks, 110Connect 

Jacks, AMP-TWIST-6S Jacks) 

1 2203.110 2203.120 2203.160 

1 – 2203.240 2203.250 

FutureCom is a brand name of Corning Cable Systems Brands, Inc. 

unilan is a registered trademark of Dätwyler Kabel+Systeme. 

AMP NETCONNECT and AMP-TWIST are brand names of Tyco Electronics Corporation. 

Fibre-optic splicing cassette 

support 

To accommodate up to 4 splicing cassettes 

to DIN 47 662. 

The cassettes may be removed individually, 

to avoid damaging intact connections during 

maintenance work. 

May be installed in two positions on the 

mounting plate or on punched sections, to 

ensure space-saving integration. 

There is plenty of space for buffered fibres. 

Strain relief of buffered fibres and cable 

pigtails may be provided from above and 

below using cable ties. 

Holder and support 

for 1 splicing cassette 

(maximum 

configuration: 

4 supports) 

Support for 1 splicing 

cassette (extension) 

Packs 

of 

Dimensions: 

W x H x D: 104 x 250 x 165 mm 

Material: 




Model No. 

IN 

1 2203.300 

1 2203.310 

Nylon loop 

Ensures orderly cable routing. 

Supplied on a reel for cutting to the required 

length. 

Unlike cable ties, 

● protects the cable sheathing 

● easily reopened 

● reusable 

Length Width Packs Model No. 

mm mm of IN 

5000 16 1 2203.400 


21

Bus enclosures BG 

Bus enclosure 

Material: 

Sheet steel 


Door: 1.5 mm 

Viewing window made from polycarbonate, 

4 mm 



Powder coated in textured RAL 7035 


IP 65 to EN 60 529/10.91 


Door hinged on the left, 

1 cam lock with double-bit insert, 

2 (1) support rail(s) TS 35/7.5 

(for BG 1586.510). 

Drilled holes for cable glands in the base. 

Approvals: 

● TÜV 

● Lloyds Register of Shipping 

● VDE 

● UL 

● C-UL 

B 

Accessories: 

Cable glands made from polyamide or 

brass, see page 65. 

T 

B 

76 

181 

300 

76 

B 

181 

119 

300 

224 

300 

Dimensions 

mm 

Number 

of PG holes 

PG version 

Metric version 

Number 

of metric 

holes 

Model No. 

BG 

Model No. 

BG 

W (B) H D (T) 9 11 13.5 16 21 M12 M20 M25 

200 300 80 1 8 – 1 1 1583.510 2 5 2 1583.520 

300 300 80 1 14 – 1 1 1584.510 2 9 2 1584.520 

400 300 80 1 18 – 1 2 1585.510 2 13 3 1585.520 

500 300 80 3 – 24 – – 1586.510 3 24 – 1586.520 

Lock systems 

Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, 

see page 47 and plastic handles, type B, see page 47. 

To order enclosures in RAL 7032, please add the extension .210 or .220 to the 

Model No. Delivery times available on request. 

T 

B 

300 

224 

119 



Bus enclosure 

Material: 

Sheet steel 


Door: 1.5 mm 


4 mm 





IP 65 to EN 60 529/10.91 


Door with r/h hinge, 

1 cam lock with double-bit insert, 

1 support rail TS 35 /7.5. 


Approvals: 

● TÜV 


● VDE 

● UL 

● C-UL 

T 

B 

135 

300 

B 

135 

300 

PG version 

Metric version 

Dimensions 

mm 

Number 

Number 

of PG holes Model No. of metric holes Model No. 

BG 

BG 

W (B) H D (T) 9 13.5 29 36 M12 M20 M32 M50 

200 300 120 2 – 5 – 1605.510 2 – 5 – 1605.520 

400 300 120 – 2 9 1 1606.510 – 2 9 1 1606.520 

Lock systems 


see page 47 and plastic handles, type B, see page 47. 

To order enclosures in RAL 7032, please add the extension .210 or .220 to the 


T 

B 

B 

100 

200 

100 

200 

Bus enclosure 

Material: 

Sheet steel 


Door: 1.5 mm 


4 mm 



Dipcoat primed, powder coated 



IP 65 to EN 60 529/10.91 

Dimensions mm 

W (B) H D (T) 

Model No. BG 

400 200 125 1558.510 

600 200 125 1559.510 

To order enclosures in RAL 7032, please 

add the extension .210 to the Model No. 



Door with bottom hinge, 

2 (3) quick-release fasteners for 

screwdrivers (with BG 1559.510), 

1 support rail TS 35 /7.5, 

1 gland plate at bottom. 

Holes for cable glands in the gland plate or 

directly in the enclosure available on 

request. 

Approvals: 

● TÜV 


● VDE 

● UL 

● C-UL 


23


H1 

H2 

T 

B = Width 

T = Depth 

F1 

B 

F1 

B 

H 

H 

G1 

G1 

Bus enclosure 

Material: 

Sheet steel 


Door: 1.5 mm 

Polycarbonate viewing window 

Zinc-plated mounting plate 






cam lock with double-bit insert 

may be exchanged for lock inserts, 

type A, page 47 and plastic handles, type B, 

page 47. 

Approvals: 

● TÜV 


● VDE 

● UL 

● C-UL 

Dimensions mm 

Enclosures 

Mounting Cam Model No. 

plate lock EB 

B H T F1 G1 

400 300 155 385 275 1 1577.500 

600 300 155 585 275 2 1578.500 

800 300 155 785 275 2 1579.500 




Bus enclosure modifications 

Viewing window and gland plates, see table. 

Height of 

viewing Gland plate 

window cut-out 2) Model No. BG 

mm at bottom 

(clearance 

H1 H2 width) mm Basic Extension 

327 x 97 1577. 

527 x 97 1578. 

2 off 327 x 97 1579. 

115 92 – .520 1) 

190 42 – .530 1) 

115 92 .550 1) 

190 42 .560 1) 

155 92 – .450 1) 

1) Extended delivery times. 

2) Gland plates 14 mm larger all-round. 

B 

100 

200 

440 

500 

Bus enclosure 

Material: 

Sheet steel 


Door: 1.5 mm 


4 mm 




Approvals: 

● TÜV 


● VDE 

● UL 

● C-UL 

Dimensions Number of 

mm 

Model No. 

holes for 

BG 

B H T PG 13.5 or M20 

400 500 160 33 1611.510 





Door with r/h hinge, 

1 cam lock with 3 mm double-bit insert, may 

be exchanged for type A lock inserts, 

page 47 and type B plastic handles, 

page 47. 

3 support rails TS 35 /7.5. 


T 

B 

440 

500 

200 

100 

B = Width 

T = Depth 



B 

115 

300 

Bus enclosure 

Material: 

Sheet steel 


Door: 1.5 mm 


4 mm 




Approvals: 

● TÜV 


● VDE 

● UL 

● C-UL 

Dimensions Number of 

mm 

Model No. 

holes for 

BG 

B H T PG 13.5 or M20 

500 300 120 48 1609.510 






2 quick-release fasteners for screwdrivers, 

1 support rail TS 35 /7.5. 


T 

B 

300 

115 

B = Width 

T = Depth 

500 

500 

132 

232 

440 

Bus enclosure 

for modular cable entry 

Material: 

Sheet steel 


Door: 1.5 mm 


4 mm 





IP 55 to EN 60 529/10.91 

(in conjunction with module plates) 

Approvals: 

● TÜV 


● VDE 

● UL 

● C-UL 

Width Height Depth Model No. 

mm mm mm BG 

500 500 210 1050.900 


18 cut-outs in the base for module plates, 

Pre-configured top-hat rail for bus systems 

(I/O modules, motor starters) and terminal 

blocks. 

Door with viewing panel for visual monitoring 

of the installed components. 

Also required: 

Module plates, 

see page 64. 

T 

500 

440 

232 

500 

132 


25



Bus enclosure 


Material: 

Stainless steel 1.4301 (AISI 304) 


Cover: 1.25 mm 

Hinges: Die-cast zinc 




Hinges: plated 


IP 66 to EN 60 529/10.91, 

complies with NEMA 4X 


Enclosure with 1 support rail TS 35/7.5, 

cover with foamed in seal, 

180° hinges with quick-release fasteners. 

Width (B1) in mm 

Packs 

of 

200 300 400 400 600 

Height (H1) in mm 300 300 300 200 200 

Depth (T1) in mm 80 80 80 123 123 

Model No. BG 1 1583.010 1) 1584.010 1) 1585.010 1) 1558.010 2) 1559.010 2) 

Weight (kg) 2.8 3.7 4.5 4.5 6.0 

To order bus enclosures in 1.4404 (AISI 316L), please add extension .500 to the 


1) Support rail attached to studs 

2) Support rail adjustable on profile strip 

B1 

T1 

B1 

B1 

H1 

100 

H1 

H1 

135 

135 


Compact enclosures AE 

Width: 200 – 600, height: 300 – 400 

F1 

F1 

B1 

T1 

B1 

H1 

H1 

G1 

G1 

Material: 

Sheet steel 








IP 66 to EN 60 529/10.91 

Complies with NEMA 12. 

(AE 1032.500, AE 1035.500) 


(AE 1030.500, AE 1031.500, 

AE 1380.500, AE 1039.500 

AE 1339.500) 


Enclosure of all-round solid 

construction, single door, 

1 gland plate in the 

enclosure base, r/h door 

hinge, may be swapped to 

opposite side (except with 

AE 1032.500 and 

AE 1035.600), with one cam 

lock, foamed-in door seal, 

mounting plate. 

Approvals: 

● UL 

● CSA 

● TÜV 




of Shipping 


of Shipping 


● VDE 


Packs 

of 

200 200 300 300 380 380 380 600 600 

Height (H1) in mm 300 300 300 400 300 300 380 380 380 

Depth (T1) in mm 120 155 210 210 155 210 210 210 350 

Mounting plate width 

(F1) mm 

162 162 254 254 334 334 334 549 549 

Mounting plate height 

(G1) mm 

275 275 275 375 275 275 355 355 355 

Mtg. plate thickness mm 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 

Model No. AE 1 1032.500 1035.500 1033.500 1034.500 1030.500 1031.500 1380.500 1039.500 1339.500 

Weight (kg) 4.0 4.5 7.0 8.8 7.4 7.5 9.8 15.4 20.0 

Lock systems 


see page 47, lock cylinder, plastic handles and T handles, type B, see page 47. 

To order enclosures in textured RAL 7032 please add extension .600 to the Model No., and for primed enclosures use 

extension .800. Delivery times available on request. 



27


Width: 380 – 800, height: 500 – 1000 

F1 

F1 

B1 

T1 

B1 

H1 

H1 

G1 

G1 

Material: 

Sheet steel 








to EN 60 529/10.91: 

IP 56, 

IP 66 for AE 1038.500, 

AE 1338.500, AE 1045.500, 

AE 1050.500, AE 1350.500, 

AE 1060.500, AE 1360.500, 




construction, single door, 

1 gland plate in the 

enclosure base, 

r/h door hinge, may be 

swapped to opposite side, 

with 2 cam locks, foamed-in 

door seal, zinc-plated 


Approvals: 

● UL 

● CSA 

● TÜV 




of Shipping 


of Shipping 


● VDE 


Packs 

of 

380 380 400 500 500 500 600 600 

Height (H1) in mm 600 600 500 500 500 700 600 600 

Depth (T1) in mm 210 350 210 210 300 250 210 350 

Mounting plate width (F1) mm 334 334 354 449 449 449 549 549 

Mounting plate height (G1) mm 570 570 475 470 470 670 570 570 

Mounting plate thickness mm 2.5 2.5 2.0 2.5 2.5 3.0 2.5 2.5 

Model No. AE 1 1038.500 1338.500 1045.500 1050.500 1350.500 1057.500 1060.500 1360.500 

Weight (kg) 15.6 19.4 13.0 16.8 19.6 31.2 22.8 28.4 


Packs 

of 

600 600 600 600 760 760 800 

Height (H1) in mm 760 760 800 1000 760 760 1000 

Depth (T1) in mm 210 350 250 250 210 300 300 

Mounting plate width (F1) mm 549 549 549 539 704 704 739 

Mounting plate height (G1) mm 730 730 770 955 730 730 955 

Mounting plate thickness mm 3.0 3.0 3.0 3.0 3.0 3.0 3.0 

Model No. AE 1 1076.500 1376.500 1058.500 1090.500 1077.500 1073.500 1180.500 

Weight (kg) 32.1 36.0 34.2 50.5 40.0 44.5 57.0 

Lock systems 


see page 47, lock cylinder, plastic handles and T handles, type B, see page 47/48. 






Width: 600 – 1000, height: 760 – 1400 

F1 

F1 

B1 

T1 

B1 

H1 

H1 

G1 

G1 

Material: 

Sheet steel 


Door: 2.0 mm 

Mounting plate: 3.0 mm 








IP 55 to EN 60 529/10.91 


IP 56 to EN 60 529/10.91 

for AE 1260.500 and 

AE 1280.500. 



construction, single door: 

1 gland plate, twin-door: 

2 gland plates in the 

enclosure base, 

3-point lock system, 

prepared for use of the 

Ergoform-S lock system, 

2 cam locks for 1100.500, 

1130.500, 1110.500, 

foamed-in door seal, zincplated 


Approvals: 

● UL 

● CSA 

● TÜV 




of Shipping 


of Shipping 


● VDE 

Possible 

alternative: 

Compact System Enclosures 

Rittal CM, see page 34. 


Height (H1) in mm 1200 1200 760 760 1000 1200 1400 

Depth (T1) in mm 300 300 210 300 300 300 300 



Model No. AE 1 1260.500 1280.500 1100.500 1130.500 1110.500 1213.500 1114.500 

Door(s) 1 1 2 2 2 2 2 

Weight (kg) 55.0 70.0 52.0 56.0 71.0 85.0 97.0 

Lock systems 


see page 47 and Ergoform-S lock system (not for 1100.500, 1130.500, 1110.500), see page 46. 





29


Protection category IP 69K 

F1 

F1 

B1 

T1 

B1 

H1 

H1 

G1 

G1 

Perfect protection in a 

tough environment 

The compact enclosure AE 

in IP 69K is the ideal solution 

when a high protection 

category and corrosion 

resistance are needed. 

● Resistant to high-pressure 

cleaning (protection 

category IP 69K). The 

interior seal is protected 

against direct hosed water. 

● Ideal for mounting on 

vehicles: Lock, hinges and 

mounting plate are all 

vibration resistant. 

● The enclosure and door 

have an aluminium zinc 

coating for a high level of 

corrosion protection. 

● Foamed-in silicone seal, 

water-impermeable, with 

high resistance to 

temperature and 

chemicals. 

● Prepared to accommodate 

the door stay 1101.800 

and the interior door. 

● Wall mounting 

Material: 

Sheet steel 



Aluminium zinc coating, 

powder coated in textured 

RAL 7035 



IP 69K to 

DIN 40 050-9/5.93 



construction, single-door, 

door hinge may be swapped 

to opposite side by rotating 

the enclosure, cam lock with 

double-bit insert, other 

inserts available on request. 


Other dimensions available 

on request. Cut-outs and 

drilled holes to your 

specifications. 

Width (B1) in mm Packs of 230 400 400 650 

Height (H1) in mm 330 400 650 650 

Depth (T1) in mm 155 250 250 250 

Mounting plate width (F1) mm 162 334 334 549 

Mounting plate height (G1) mm 275 355 570 570 

Mounting plate thickness mm 2 2 2.5 2.5 

Model No. AE 1 1101.010 1101.020 1101.030 1101.040 

Weight (kg) 6.6 13.8 20 29.6 

Locks 1 2 2 2 





F1 

F1 

T1 

B1 

T1 

B1 

H1 

G1 

H1 

G1 

Material: 


(AISI 304) 



Mounting plate: Sheet steel 

Cam lock: Die-cast zinc, 

nickel-plated 






IP 66 to EN 60 529/10.91 

for AE 1002.600 – 

AE 1017.600, complies with 

NEMA 4X. 

IP 55 to EN 60 529/10.91 

for AE 1018.600, 

AE 1019.600, 



Enclosure, door(s) with 

foamed-in PU seal, mounting 

plate. 

Approvals: 

● UL 

● CSA 

● TÜV 




of Shipping 


of Shipping 


● VDE 


Height (H1) in mm 300 300 380 380 500 500 600 

Depth (T1) in mm 155 155 210 210 210 300 210 



Model No. AE 1 1002.600 1004.600 1005.600 1006.600 1007.600 1013.600 1008.600 

Door(s) 1 1 1 1 1 1 1 

Weight (kg) 4.5 8.8 8.7 12.0 18.4 18.9 17.0 

Width (B1) in mm Packs of 600 600 600 760 800 800 1000 1000 

Height (H1) in mm 380 600 760 760 1000 1200 1000 1200 

Depth (T1) in mm 210 210 210 300 300 300 300 300 

Mounting plate width (F1) mm 549 549 549 704 739 – 939 – 

Mounting plate height (G1) mm 355 570 730 730 955 – 955 – 

Model No. AE 1 1009.600 1010.600 1012.600 1014.600 1016.600 1017.600 1018.600 1019.600 

Door(s) 1 1 1 1 1 1 2 2 

Weight (kg) 17.0 25.0 31.7 42.5 52.9 70.0 71.0 85.0 

Lock systems 

Standard double-bit lock insert may be exchanged in enclosures with cam (except AE 1018.600/AE 1019.600) for lock 

inserts 41 mm, lock cylinder insert, plastic handles, T-handles, type C, see Cat. 31, page 886 – 889. 

With AE 1018.600, may only be exchanged for lock inserts 41 mm, see Cat. 31, page 888. 

For enclosures with locking rod, may be exchanged for 27 mm lock inserts, type A, see page 47 and Ergoform-S lock 

system, see page 46. 

To order enclosures in stainless steel 1.4404 (AISI 316L), please add extension .500 to the Model No. 




31

Plastic enclosures KS 

Width: 200 – 500, height: 300 – 600 

F1 

F1 

B1 

T1 

B1 

H1 

H1 

G1 

G1 

Material: 


Fibreglass-reinforced 

unsaturated polyester 


For KS with viewing window: 

Impact resistant glazed 

acrylic, 3.0 mm with allround 

rubber cable clamp 

strip 



No after-treatment, 

dyed plastic, 

similar to RAL 7032 



KS without viewing window: 

IP 66 to EN 60 529/10.91 

Complies with NEMA 4X 

KS with viewing window: 

IP 56 to EN 60 529/10.91 

Complies with NEMA 12 


Enclosure of solid all-round 

construction, r/h door hinge, 

door hinge may be swapped 

to opposite side by rotating 

the enclosure, mounting 

plate, all-round foamed-in PU 

seal in the door, 

twin seal on the top and 

bottom edges of the door 

(integral rain protection 

strip), press-fitted 

C sections at the sides for 

infinitely variable mounting 

plate depth adjustment. 

Note: 

Under the influence of longterm 

UV radiation (sunlight) 

in conjunction with wind and 

rain, the surface finish may 

become visually impaired. 

In other words, the fibreglass 

portions become 

visible on unprotected surfaces. 

This does not impair 

the protection of the installed 

electrical components in any 

way. All other surface finishes 

are likewise impaired 

by ultraviolet radiation. 

If the enclosures cannot be 

protected from radiation, e.g. 

via a sun canopy, we recommend 

that they should be 

painted with a PUR paint. 

Older enclosures where the 

surface finish already reveals 

visible fibreglass portions 

can likewise be treated in 

this way after thorough 

cleaning. 

Of course, all enclosures can 

also be supplied spray-finished 

in RAL colours. For 

outdoor siting, we recommend 

pale shades. 

Permissible ambient 

temperature: 

–30°C to +75°C. 

Approvals: 

● UL (without viewing 

window) 

● CSA (without viewing 

window) 

● TÜV 




of Shipping 


of Shipping 


● VDE 

Packs of Without viewing window With viewing window 

Width (B1) in mm 200 250 300 400 400 500 400 400 500 

Height (H1) in mm 300 350 400 400 600 500 400 600 500 

Depth (T1) in mm 150 150 200 200 200 300 200 200 300 

Mtg. plate width 

(F1) mm 

145 195 245 345 345 417 345 345 417 

Mtg. plate height 

(G1) mm 

250 300 350 350 550 450 350 550 450 

Mtg. plate 

thickness mm 

2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.5 2.5 

Model No. KS 1 1423.600 1432.600 1434.600 1444.600 1446.600 1453.600 1448.600 1449.600 1454.600 

Door(s) 1 1 1 1 1 1 1 1 1 

Weight (kg) 3.0 4.1 6.0 7.9 11.5 12.9 8.0 11.5 13.4 

Lock systems 

Standard double-bit lock insert may be exchanged for lock inserts, type E, see Cat. 31, page 888, 

and plastic handle, type E, KS 1484.000, see Cat. 31, page 886. 



Plastic enclosures KS 

Width: 600 – 1000, height: 600 – 1000 

F1 

F1 

B1 

T1 

B1 

H1 

H1 

G1 

G1 

Material: 


Fibreglass-reinforced 

unsaturated polyester 


For KS with viewing window: 

Impact resistant glazed 

acrylic, 3.0 mm with allround 

rubber cable clamp 

strip 



No after-treatment, 

dyed plastic, 

similar to RAL 7032 



KS 1466.600, KS 1468.600: 

IP 66 to EN 60 529 


KS single-door 

without viewing window: 

IP 56 to EN 60 529 


KS twin-door and 

KS with viewing window: 

IP 56 to EN 60 529 

Complies with NEMA 12 


Enclosure of solid all-round 

construction, r/h door hinge, 

may be swapped to opposite 

side by rotating the 

enclosure (only with singledoor 

models), mounting 

plate, all-round foamed-in 

PU seal in the door, 

twin seal on the top and 

bottom edges of the door 

(integral rain protection 

strip), press-fitted 

C sections at the sides for 

infinitely variable mounting 

plate depth adjustment. 

KS 1400.600 additionally 

with removable centre bar in 

the enclosure. 

Note: 

Under the influence of longterm 

UV radiation (sunlight) 

in conjunction with wind and 

rain, the surface finish may 

become visually impaired. 

In other words, the fibreglass 

portions become 

visible on unprotected surfaces. 

This does not impair 

the protection of the installed 

electrical components in any 

way. All other surface finishes 

are likewise impaired 

by ultraviolet radiation. 

If the enclosures cannot be 

protected from radiation, e.g. 

via a sun canopy, we recommend 

that they should be 

painted with a PUR paint. 

Older enclosures where the 

surface finish already reveals 

visible fibreglass portions 

can likewise be treated in 

this way after thorough 

cleaning. 

Of course, all enclosures can 

also be supplied spray-finished 

in RAL colours. For 

outdoor siting, we recommend 

pale shades. 

Permissible ambient 

temperature: 

–30°C to +75°C. 

Approvals: 

● UL (without viewing 

window) 

● CSA (without viewing 

window) 

● TÜV 




of Shipping 


of Shipping 


● VDE 

Packs of Without viewing window With viewing window 

Width (B1) in mm 600 600 800 1000 600 600 800 

Height (H1) in mm 600 800 1000 1000 600 800 1000 

Depth (T1) in mm 200 300 300 300 200 300 300 



Mounting plate thickness mm 2.5 3.0 3.0 3.0 2.5 3.0 3.0 

Model No. KS 1 1466.600 1468.600 1480.600 1400.600 1467.600 1469.600 1479.600 

Door(s) 1 1 1 2 1 1 1 

Weight (kg) 15.9 26.0 39.0 50.0 15.9 25.5 33.0 

Lock systems 

Standard double-bit lock insert may be exchanged for lock inserts, type E, see Cat. 31, page 888, 

and Ergoform-S lock system, KS 1490.000, see page 46. 



33

Compact system enclosures Rittal CM 

Width: 600 – 1200, height: 800 – 1400 

F 

F 

T 

B 

B 

H 

H 

G 

G 

T 

Material: 

Sheet steel 


Door: 2.0 mm 

Mounting plate: 3.0 mm 








IP 55 with selection of the 

appropriate gland plates, 

see page 35. 


Enclosure with one door, r/h 

door hinge, may be 

swapped to opposite side, 

mounting plate, 

open base for individual 

cable entry, 

see page 35. 

Width (B) mm 

Packs 

of 

600 600 600 600 800 800 800 800 

Height (H) in mm 800 1000 1200 1200 1000 1000 1200 1200 

Depth (T) in mm 400 400 300 400 300 400 300 400 

Mounting plate width (F) in mm 540 540 540 540 740 740 740 740 

Mounting plate height (G) in mm 755 955 1155 1155 955 955 1155 1155 

Model No. CM 1 5110.500 5111.500 5112.500 5113.500 5114.500 5115.500 5116.500 5117.500 

Door 1 1 1 1 1 1 1 1 

Width (B) mm 

Packs 

of 

1000 1000 1000 1000 1000 1200 

Height (H) in mm 1000 1200 1200 1400 1400 1200 

Depth (T) in mm 300 300 400 300 400 400 

Mounting plate width (F) in mm 940 940 940 940 940 1140 

Mounting plate height (G) in mm 955 1155 1155 1355 1355 1155 

Model No. CM 1 5118.500 5119.500 5120.500 5121.500 5122.500 5123.500 

Doors 2 2 2 2 2 2 

Lock systems 

Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 47, 

and folding lever handle, see page 37. 

To order primed enclosures, please add extension .800 to the Model No. Delivery times available on request. 

Compact system enclosures Rittal CM accessories from page 35 General accessories from page 40 



Accessories 

Combination options: 

Depth 300 mm 

One-piece/ 

8 3 

Cable gland 

Divided/ 

Cable gland 

Divided/ 

Cable clamp 

strip, centre 

Divided/ 

Cable clamp 

strip, rear 

Divided/ 

Cable clamp 

strip, centre and 

rear 

Divided/ 

1 x grommets 

Divided/ 

2 x grommets 

EMC 

2 8 1 

1 

9 

5 

2 

1 

Gland plates 

Select suitable gland plates depending on 

the application. The following examples 

illustrate the individuality of cable entry 

design. Potential equalisation is provided via 

assembly components and earthing points. 

Depth 400 mm 

4 8 

2 8 3 8 

1 

5 

3 

9 2 2 

9 1 5 2 

6 1 

6 3 

6 

7 

6 

1 

2 

For enclosure width 

mm 

600 800 1000 1200 

Model No. 

1 5001.210 5001.211 5001.212 5001.213 

2 5001.214 5001.215 5001.216 5001.217 

3 5001.218 5001.219 5001.220 5001.221 

4 5001.222 5001.223 5001.224 5001.225 

6 5001.226 1) 5001.227 1) 5001.228 1) 5001.229 1) 

1) Cable entry grommets see Cat. 31, 

page 965. 

Design 

Material: 



IP 55 if mounted correctly. 


1 piece, including assembly parts. 

Note: 

For greater stability and universal cable 

entry, the base opening is divided in the 

width for 1000 and 1200 mm wide 

enclosures, and is suitable for various 

configurations. 

Key: 

1 Gland plate, depth 50 mm 




5 Section for cable entry, centre, 

see Cat. 31, page 965. 

6 Cable entry plate, depth 100 mm, 

see above. 

Grommets, see Cat. 31, page 965 

7 EMC gland plate, 


8 Cable glands, 


9 Section for cable entry, rear, 

see page 61. 

Order example: 

CM 5120.500 

(W/H/D 1000 x 1200 x 400 mm) 

– On the left, two-piece gland plates with 

cable clamp strip 

– On the right, one-piece gland plate 

5 

1 3 

4 

You will need: 

5 2 sections for cable entry, centre, 

TS 8802.100, see Cat. 31, page 965 

(Packs of 4) 

1 1 gland plate, depth 50 mm, 5001.212 




35


Accessories 

Cover plate 

To conceal the entire base opening or as a 

lid with a fitted enclosure rotated through 

180°. 

Material: 

Sheet steel 

Colour: 




For enclosure Model No. 

W (B) mm D (T) mm CM 

600 

5001.100 

800 300 5001.110 

1000 5001.120 

600 

5001.130 

800 5001.140 

400 

1000 5001.150 

1200 5001.160 

B 

T - 25.5 

106.5 56.5 

12.5 

2 1 2 

280 20 

20.25 12.5 

1 

2 

32.5 

M6 x 12 only with enclosure width 600, 

800 

M6 x 12 only with enclosure width 1000, 

1200 

M8 x 30 

1 2 

3 

Cable clamp rail 

C section 

For strain relief with cable entry. 

The length of the cable clamp rail is tailored 

to the width of the CM and TS mounting 

plate. The mounting bracket included with 

the supply supports three different 

installation situations on the mounting plate: 

1 

2 

3 

straight, at a distance of 23 mm from the 

mounting plate 

straight, at a distance of 10 mm from the 

mounting plate 

tilted, towards the mounting plate 

Material: 

Sheet steel 


Zinc plated, passivated 


Two mounting brackets and assembly 

screws. 

For 

enclosure 

width 

mm 

Length 

mm 

Model No. CM 

600 499 5001.080 

800 699 5001.081 

1000 899 5001.082 

1200 1099 5001.083 

Accessories: 

Cable clamps for C rails 

For 

cable diameter Packs of Model No. DK 

mm 

6 – 14 25 7077.000 

12 – 18 25 7078.000 

18 – 22 25 7097.000 

22 – 26 25 7097.220 

26 – 30 25 7097.260 

30 – 34 25 7097.300 

34 – 38 25 7097.340 

38 – 42 25 7098.000 

42 – 56 25 7098.100 

56 – 64 25 7099.000 



Accessories 

Folding lever handle 

Because the handle does not take up any 

swing space, due to its folding mechanism, 

the door surface area may be maximised for 

installed equipment. 

Colour: 

Enclosure: Sim. to RAL 9005 

Handle: Sim. to RAL 9006 

Prepared for the installation of: 

● Semi-cylinders with an overall length of 40 

or 45 mm (to DIN 18 254) 

● All lock inserts 

● As well as SZ lock and push-button inserts 

Packs of Model No. CM 

Standard version 1 5001.060 

For padlock 1 5001.062 

Accessories: 

Lock inserts, 

see page 47. 

SZ lock and push-button inserts, 

see page 46. 

Prepared for the installation of: 


KESO 1 5001.063 

ASSA 1 5001.064 

With security lock insert E1. 

Only for applications in VW, Audi, SEAT, 

SkodaAuto. 

Supplied without key. 

Other locks available on request. 


Lock E1 1 5001.061 

Lock inserts 

For folding lever handle CM 5001.060 and 

standard CM lock (in exchange for the 

standard double-bit lock insert). 

Design 

Model No. TS 

7 mm square 8611.100 

8 mm square 8611.110 

6.5 mm triangular 8611.220 

7 mm triangular 8611.120 


Screwdriver 8611.140 

Daimler 8611.150 

3 mm double-bit 8611.160 

Fiat 8611.170 

Hinges, 180° 

For retrospective conversion of standard 

doors with 130° hinges. One pack is 

sufficient for one door – i.e. with two-door 

enclosures, two packs will be required. 


3 5001.000 




37


Accessories 

Rails for interior installation 

For mounting on the threaded bolts provided 

on the enclosure. 

With TS system punchings on three sides. 

Material: 

Sheet steel, zinc plated, passivated 



For enclosure height/ Packs 

width mm of 

Model No. 

SZ 

600 4 5001.050 

800 4 5001.051 

1000 4 5001.052 

1200 4 5001.053 

1400 4 5001.054 

Installation accessories 

Model No. 

For depth mm 

300 400 

1 TS punched section with mounting flange, 

17 x 73 mm for the outer level 

8612.130 8612.140 

2 TS support strip for the outer level – 4694.000 

3 TS punched rail 18 x 38 mm – 8612.240 

20 PS punched rail 23 x 23 mm 

with mounting bracket TS 

– 4169.000 

For width (mm) 

600 800 1000 1200 

4 TS punched section with mounting flange, 

17 x 73 mm for the inner level 

8612.060 8612.080 8612.000 8612.020 

5 TS support strip for the inner level 8800.130 4579.000 – – 

PS punched section without mounting 

7 

flange 23 x 73 mm, with support bracket 

TS (alternatively with one or two punched 

rails 23 x 23 mm) 

4376.000 4377.000 4382.000 4378.000 

1 

Partial mounting plates 

for universal interior installation, 


Installation: 

static via TS punched sections with 

mounting flanges mounted in the depth 1, 

horizontally hinged via PS punched sections 

without mounting flanges mounted in the 

depth 7 and hinge attachment for partial 

mounting plates, see Cat. 31, page 914. 

1 4 

4 

2 5 

Swing frame, small 

for 600 and 800 mm wide enclosures, 


Installation: 

via PS punched sections without mounting 

flanges mounted in the depth 7. 

4 

1 

5 

7 7 

2 

3 

20 


CS Outdoor 

CS wall-mounted enclosures 

B3 

T1 

B1 

B2 

T2 

H1 

H2 

H3 

1 2 

Material: 

Aluminium AlMg3 

Enclosure: 

Exterior: 2.0 mm 

Interior: 1.5 mm / 2.0 mm 

Doors: 2.0 mm 

Mounting plate/rotating 

frame: 

2.0 mm clear chromated 

Colour: 

RAL 7035 


IP 55 to EN 60 529/10.91 


Inner enclosure with door, 

aluminium mounting plate 

or rotating frame, 

security lock 

(CS 9791.045 and 

CS 9791.145 with 2 security 

locks), 

foamed-in door seals, 

gland plate at bottom, 

mounting bracket for 

thermostat, 

outer enclosure with integral 

vent louvres, 

designer cover with security 

lock, C rails on the rear 

panel. 

Protection rights for wallmounted 

enclosure with 

mounting plate: 

German utility model 

no. 297 16 467 

German registered design 

no. 97 08 625 

UK registered design 

no. 2 072 965 

IR reg. design 

no. DM/044 110 

with validity for ES, FR, IT, 

Indonesia 

US patent no. 6,024,236 

European patent 

no. 0 902 514 

with validity for FI, GB, SE 

Japan. patent no. 3 189 210 

1 

2 

Wall-mounted enclosure 

with mounting plate 

482.6 mm (19˝) rotating 

frame 


Complete customised 

interior installation 

of the wall-mounted 

enclosure up to integration 

level 4 to the customer's 

specifications is available. 

Detailed drawing, 

can be found on the Internet. 


Packs 

of 

370/300 420/350 530/460 630/580 630/580 

Height (H1) in mm 522.5/400 560.5/440 700/565 780/580 780/580 

Depth (T1) in mm 210/170 210/170 265/220 380/333 380/333 

Clearance width (B2) in mm 280 330 440 560 560 

Clearance height (H2) in mm 380 420 545 560 560 

Clearance depth (T2) in mm 145 145 195 308 240 2) 

Mounting plate width (B3) in mm 270 320 430 550 – 

Mounting plate height (H3) in mm 380 410 535 550 – 

Model No. CS 1 9791.015 9791.025 9791.035 9791.045 9791.145 1) 

1) With 5 U rotating frame instead of mounting plate. 

2) Max. installation depth in the 482.6 mm (19˝) level. 

Wall mounting 

For mounting on a wall or 

panel. 

Material: 


(AISI 304) 

Packs of Model No. CS 

4 9765.120 

Pole clamp 


4 clamping sections, 

2 clamping straps, 

4 clamping brackets. 

Packs of Model No. CS 

1 set 9765.125 



39

Accessories 

Base/doors/locks from page 41 

Base/plinth, complete . . . . . . . . . . . . . . . . 41 

Base/plinth components, front and rear . . 42 

Base/plinth trim, side . . . . . . . . . . . . . . . . . 42 

Interior door . . . . . . . . . . . . . . . . . . . . . . . . 43 

Acrylic glazed cover . . . . . . . . . . . . . . . . . 43 

System windows . . . . . . . . . . . . . . . . . . . . 44 

Viewing window . . . . . . . . . . . . . . . . . . . . . 45 

Operating panel . . . . . . . . . . . . . . . . . . . . . 45 

The Ergoform S lock system . . . . . . . . . . . 46 

Ergoform standard . . . . . . . . . . . . . . . . . . . 46 

Lock and push-button inserts . . . . . . . . . . 46 

Plastic handles . . . . . . . . . . . . . . . . . . . . . . 47 

T handles . . . . . . . . . . . . . . . . . . . . . . . . . . 47 

Lock inserts . . . . . . . . . . . . . . . . . . . . . . . . 47 

Cylinder inserts . . . . . . . . . . . . . . . . . . . . . 48 

Semi-cylinder lock . . . . . . . . . . . . . . . . . . . 48 

Enclosure keys . . . . . . . . . . . . . . . . . . . . . . 48 

Universal enclosure key . . . . . . . . . . . . . . . 48 

Plastic wiring plan pocket . . . . . . . . . . . . . 49 

180° hinges . . . . . . . . . . . . . . . . . . . . . . . . 49 

Hinge pin remover . . . . . . . . . . . . . . . . . . . 50 

Roof/wall mounting from page 50 

Eyebolts . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 

Wall mounting bracket . . . . . . . . . . . . 50 – 51 

Wall angle . . . . . . . . . . . . . . . . . . . . . . . . . 51 

Wall bracket . . . . . . . . . . . . . . . . . . . . . . . . 51 

Pole clamp . . . . . . . . . . . . . . . . . . . . . . . . . 51 

Interior installation from page 52 

Mounting plates . . . . . . . . . . . . . . . . . . . . . 52 

Mounting bracket . . . . . . . . . . . . . . . . . . . . 53 

Support rails TS 35/7.5 and TS 35/15 . . . . 53 

Support rails. . . . . . . . . . . . . . . . . . . . . . . . 53 

Mounting clip . . . . . . . . . . . . . . . . . . . . . . . 53 

Mounting plates . . . . . . . . . . . . . . . . . . . . . 54 

Rail mounting bracket . . . . . . . . . . . . . . . . 54 

Universal bracket . . . . . . . . . . . . . . . . . . . . 54 

Mounting block . . . . . . . . . . . . . . . . . . . . . 55 

Threaded inserts M6 . . . . . . . . . . . . . . . . . 55 

Self-tapping screws . . . . . . . . . . . . . . . . . . 55 

Captive nuts M5/M6 . . . . . . . . . . . . . . . . . . 55 

System lights . . . . . . . . . . . . . . . . . . . . . . . 56 

Standard light. . . . . . . . . . . . . . . . . . . . . . . 56 

Courtesy light . . . . . . . . . . . . . . . . . . . . . . . 56 

Universal light. . . . . . . . . . . . . . . . . . . . . . . 57 

System light with filament tube 

(Linestra) . . . . . . . . . . . . . . . . . . . . . . . . . . 57 

Connection accessories. . . . . . . . . . . . . . . 58 

Earth straps . . . . . . . . . . . . . . . . . . . . . . . . 59 

Earthing strap. . . . . . . . . . . . . . . . . . . . . . . 59 

Contact washers . . . . . . . . . . . . . . . . . . . . 59 

Cable management from page 59 

Cable entry plates . . . . . . . . . . . . . . . . . . . 59 

Cable entry grommets . . . . . . . . . . . . . . . . 60 

Connector grommets . . . . . . . . . . . . . . . . . 60 

Foam rubber cable clamp strip . . . . . . . . . 60 

Section for cable entry . . . . . . . . . . . . . . . . 60 

Section for cable entry, rear. . . . . . . . . . . . 61 

Plastic cable gland plates . . . . . . . . . 61 – 62 

Plastic gland plates . . . . . . . . . . . . . . . . . . 62 

Metal gland plates . . . . . . . . . . . . . . . 63 – 64 

Module plates . . . . . . . . . . . . . . . . . . . . . . 64 

Cable gland, brass . . . . . . . . . . . . . . . . . . 65 

Cable gland, polyamide. . . . . . . . . . . . . . . 65 

Multi-seal inserts . . . . . . . . . . . . . . . . . . . . 66 

Stoppers. . . . . . . . . . . . . . . . . . . . . . . . . . . 66 

Double-membrane gland . . . . . . . . . . . . . . 66 

Stepped collar . . . . . . . . . . . . . . . . . . . . . . 66 

Connector gland . . . . . . . . . . . . . . . . . . . . 67 

Cable conduit and cable conduit holder . . 67 

Cable fastening . . . . . . . . . . . . . . . . . . . . . 67 

Cable ties . . . . . . . . . . . . . . . . . . . . . . . . . . 68 

Metal cable ties . . . . . . . . . . . . . . . . . . . . . 68 

Miscellaneous from page 68 

Compact swing frame . . . . . . . . . . . . . . . . 68 

Utility shelf . . . . . . . . . . . . . . . . . . . . . . . . . 69 

Interface flap . . . . . . . . . . . . . . . . . . . . . . . 69 


Base/plinth, complete 

Sheet steel 

for AE, AK, AP, AP universal console, 

ES, PC-ES 

Consisting of: 

Trim panels at the front and rear with fitted 

corner pieces and side trim panels. 

Material: 

Sheet steel, spray finished 

Colour: 

RAL 7022 

Accessories 

Base/plinth 


Assembly parts including 4 screws and 

captive nuts M12 for mounting on the 

enclosure. 

100 mm high: 

4 corner pieces, 2 trim panels front/rear 

2 trim panels, side. 

200 mm high: 

4 corner pieces, 

1 trim panel front/rear x 200 mm, 

2 trim panels front/rear x 100 mm, 

4 trim panels, side. 

Base/plinth for AE, AK, AP 

For enclosures / consoles Base/plinth 

Model No. SO 

Width (B) mm Depth mm 

depth (T) 

mm 100 mm high 200 mm high 

600 300 279 2816.200 2826.200 

600 400 370 2911.200 2912.200 

800 300 279 2818.200 2828.200 

800 400 370 2901.200 2902.200 

800 500 440 2841.200 2842.200 

1000 300 279 2801.200 2802.200 

1000 400 370 2891.200 2892.200 

1200 400 370 2921.200 2922.200 

1200 500 440 2851.200 2852.200 

1600 400 370 2961.200 2962.200 

1600 500 440 2863.200 2864.200 

Accessories: 

Fastening bolts for base/plinth trim, 

see Catalogue 31, page 838. 

Base assembly plate, 


12.5 

37.5 

125 

100 

30 

125 

100 

Plinth, 100 mm high 

25 

18 x 14 

22.5 

52.5 

50 

Ø 8.5 

T 

30 

□ 14 

52.5 

25 

98 

100 

Plinth, 200 mm high 

12.5 

37.5 

62.5 62.5 

32.5 32.5 

2 

98 98 

200 

B 


41

Accessories 

Base/plinth 

Base/plinth components 

front and rear 

Sheet steel 

for TS, CM, PC-TS, IW, FR(i), TE 

Base/plinth component consisting of one 

trim panel and two pre-configured corner 

pieces. In 200 mm high base/plinth 

components, one trim panel is divided into 

two for cable entry. 

Material: 

Sheet steel, spray finished in RAL 7022 

Cover caps: Plastic RAL 9005 


1 set = 

2 base/plinth components, 4 cover caps, 

4 screws and captive nuts M12 

for mounting on the enclosure. 

Base/plinth trim, side 

Sheet steel 

for TS, CM, PC-TS, IW, FR(i), TE 

For mounting between the base/plinth 

components. At 200 mm height, two 100 mm 

base/plinth trims may be used. 

Material: 

Sheet steel, spray finished in RAL 7022 


1 set = 

2 base/plinth trim panels, including parts for 

attaching to the base/plinth components. 

For enclosure Model No. TS 

width mm 100 mm high 200 mm high 

600 8601.600 8602.600 

800 8601.800 8602.800 

1000 8601.000 8602.000 

1200 8601.200 8602.200 

Accessories: 

Base assembly plate SO 2817.000, 


German patent no. 198 60 408 

For enclosure Model No. TS 

depth mm 100 mm high 200 mm high 

300 8601.030 8602.030 

400 8601.040 8602.040 

Accessories: 

Fastening bolts for base/plinth trim, 



Accessories 

Doors 

Interior door 

with mounting frame 

for compact enclosure AE IP 69K 

For the installation of control and display 

components. Mounting frame, depthadjustable 

for a distance between the outer 

surface and the inside of the outer door of 

35 to 85 mm (80 mm with AE 1101.010). 

Material: 

Sheet steel, 1.5 mm 

Colour: 

RAL 7035 


Mounting frame, door with cam lock and 

screwdriver insert, 

including assembly parts. 

For 

AE enclosure 

W (B) 

mm 

H 

mm 

Model No. 

AE 

1101.010 160 260 1101.910 

1101.020 330 330 1101.920 

1101.030 330 580 1101.930 

1101.040 580 580 1101.940 

H 

23 

23 

30 30 

70 

B 

Acrylic glazed cover 

With security lock, 

lock no. 3524 E. 

Material: 

Frame: 

Extruded aluminium sections with 

die-cast corner pieces 

Glass panel: Smoked acrylic 


IP 54 to EN 60 529/10.91 

Acrylic glazed covers, 482.6 mm (19˝) 

U 


mm mm mm FT 

3 320 158 47.5 2780.000 

3 534 158 47.5 2781.000 

6 534 291.5 47.5 2782.000 

9 534 425 47.5 2796.000 

Max. installation depth: 43 mm 

Visible area: 

(width – 40 mm) x (height – 20.5 mm) 

Metric acrylic glazed covers 


mm mm mm FT 

400 200 47.5 2784.000 

400 400 47.5 2785.000 

500 200 47.5 2786.000 

500 400 47.5 2787.000 

600 200 47.5 2788.000 

600 400 47.5 2789.000 

Max. installation depth: 43 mm 

Visible area: 

(width – 40 mm) x (height – 20.5 mm) 


43

Accessories 

Windows 

Profile height 30 

Profile height 60 

33 

System windows 

To conceal display and operating 

instruments or cut-outs, and to protect 

against dirt and liquids as well as 

unauthorised access. 

Consisting of the following components: 

1. Base frame: 

● Easily screw-fastened to the door thanks 

to modified dimensions (tubular door 

frame may be used as a drilling template). 

● Readily height-adjustable. 

● Stabilises the door cut-out. 

● Conceals the cut edge. 

● The rain canopy 

− prevents dirt from landing on the seal, 

− protects the glass from being lifted out, 

− prevents the ingress of dirt and moisture 

when opening the window. 

2. Viewing window: 

● Made from single-pane safety glass: 

− high level of resistance to solvents and 

scratches, 

− anti-static, 

− reduced risk of injury if broken. 

● Integral cam lock with double-bit insert, 

easily exchanged for all standard lock 

inserts and semi-cylinders in the 

Ergoform-S lock system 

(not with FT 2735.500 and .560). 

● Hinge with 180° opening angle, easily 

inserted. 

Material: 

System windows: 

Extruded aluminium sections with die-cast 

zinc corner pieces and single-pane safety 

glass. 


Base frame: 

Powder coated in RAL 7035. 

Hinge and lock section: 

Natural anodised. 


IP 54 to EN 60 529/10.91. 

63 

To fit 

Window size (mm) 

TS, ES, IW external internal Model No. FT Model No. FT 

with width 

30 section 60 section 

mm 

W H w h 

270 

200 2735.500 – 

370 300 2735.510 2736.510 

600 500 470 430 400 2735.520 2736.520 

570 500 2735.530 2736.530 

670 600 2735.540 2736.540 

270 

200 2735.560 – 

370 300 2735.570 – 

800 700 470 630 400 2735.580 2736.580 

570 500 2735.590 2736.590 

670 600 2735.250 2736.500 

Other sizes 1) 2735.509 2736.509 

Lock systems 


see page 47 and Ergoform-S lock system (except H = 270 mm), see page 46. 

1) Please also specify the external dimensions of the viewing window. 


Example: 

System window (30 profile) to fit door width 500 mm 

with width W = 400 mm x height H = 480 mm (w x h = 330 mm x 410 mm) 

Model No. FT 2735.509/W x H = 400 x 480 mm. 


Accessories 

Windows/operating panels 

Viewing window 

For mounting on 

● AE instead of door 

● Surfaces 

Material: 

Frame: Aluminium, natural anodised. 

Glass panel: Acrylic 


IP 54 to EN 60 529/10.91 


Plastic handle with lock 

insert no. 3524 E. 

For use 

Width Height 

Model No. FT 

as door variant with AE mm mm Depth = 34 mm Depth = 60 mm 

1039.500, 1339.500, 1009.500 599 377 2730.000 2760.000 

1050.500, 1350.500, 1007.500 499 497 2733.000 2763.000 

1010.500, 1060.500, 1360.500 599 597 2731.000 2761.000 

1012.500, 1076.500, 1376.500 599 757 2732.000 2762.000 

for 3 U subrack 599 197 2734.000 – 

Max. installation depth: (depth – 4 mm) Visible area: (width – 60 mm) x (height – 60 mm) 

Note: 

Other modules available on request. 

Operating panel 

For mounting on: 

● AE instead of door 

● Surfaces 

Frame construction with corner connectors 

on the inside, 3 mm aluminium plate 

secured from the inside and sealed against 

the frame. 

Material: 

Aluminium, natural anodised. 


IP 54 to EN 60 529/10.91 


Aluminium frame, display panel, 

hinges, brackets. 

German patent no. 28 47,994 

European patent no. 10,763 

with validity for AT, BE, CH, FR, GB, 

NL, SE 

Accessories: 

Cam lock FT 2749.000, 


For use as door variant Width Height Depth 

for AE 

mm mm mm 

Model No. FT 

1002.500, 1032.500, 1035.500 199 297 34 2740.000 1) 

1004.500, 1030.500, 1031.500 379 297 34 2741.000 

1006.500, 1380.500 379 377 34 2742.000 

1008.500, 1038.500, 1338.500 379 597 34 2743.000 

1007.500, 1013.500, 1050.500, 

1350.500 

499 497 34 2745.000 

1009.500, 1039.500, 1339.500 599 377 34 2744.000 

1010.500, 1060.500, 1360.500 599 597 34 2746.000 

1) With AE, only for use on the rear panel 

Area available for population: (width – 70 mm) x (height – 70 mm) 

Dimensions of aluminium plate: (width – 54 mm) x (height – 54 mm) 

Note: 

Other modules available on request. 


45

Accessories 

Locks 

The Ergoform S 

lock system 

The unlocked handle folds down forwards 

and is swivelled to open the lock. 

Material: 

Die-cast zinc 


Powder coated 

Ergoform standard 

Prepared for the installation of semicylinders 

with a total length of 40 or 45 mm 

(to DIN 18 254) and all 27 mm lock inserts, 

version A, see page 47. 

Design 

Model No. SZ 

RAL 7032 

With brown handle 

2450.000 

Brown 2451.000 

Matt nickel-plated 2452.000 

RAL 7032 2454.000 

RAL 7035 2435.000 

RAL 7032 1) 

With brown handle and 2455.000 

bracket 

1) Hole diameter = 7 mm 

for padlock 

To fit KS plastic enclosures. Prepared for 

the installation of semi-cylinders with a total 

length of 40 mm (to DIN 18 254), all 27 mm 

lock inserts, version A, and lock and pushbutton 

inserts, see page 46/47. 

Design 

RAL 7032 

With brown handle 

Model No. KS 

1490.000 

Lock and push-button inserts 

For installation in 

● comfort handle for semi-cylinder, 

see Cat. 31, page 882 

● Ergoform-S standard 

see page 46 

● CM folding lever handle, 

see page 37 

Design 

Model No. SZ 

Lock insert 

2467.000 

Lock no. 3524 E 

1) 

Push-button insert 2468.000 

Lock and 

push-button insert, 

lock no. 2123; 

2469.000 1) 

No other lock is 

possible 

1) with 2 keys 


1 

Plastic handles 

with cylinder insert. 

Lock no. 3524 E including assembly parts, 

seal and 2 keys. 

Accessories 

Locks 

Note: 

The universal lock systems allows the 

installation of a suitable handle to suit almost 

any application or customer specification. 

The relevant product ordering page shows 

which handles can be fitted into each 

particular assembly. 

Version B 

Colour Model No. SZ 

1 RAL 9011 2576.000 

RAL 7030 2439.000 

2 

Version B, 

but without cylinder insert. 

2 

Colour Model No. SZ 

RAL 9011 2533.000 

T handles 

Version B 

Material: 

Die-cast zinc, chrome-plated 

Design 

Model No. SZ 

With lock insert, 

lock no. 3524 E 

2575.000 

Without lock insert 2572.000 


Seal and 2 keys. 

Lock inserts 

Version A 

Material: 

Die-cast zinc 

Note: 

The universal lock systems allows the 

installation of a suitable lock to suit almost 

any application or customer specification. 

The relevant product ordering page shows 

which locks can be fitted into each particular 

assembly. 

Length 27 mm Model No. SZ 

7 mm square 2460.000 

8 mm square 2461.000 



Screwdriver 2464.000 

Daimler insert 2465.000 

3 mm double-bit 2466.000 

Fiat 2307.000 

6.5 mm triangular 

(CNOMO) 

2460.650 


47

Accessories 

Locks 

Cylinder inserts 

Version B 

Lock no. 3524 E with 2 keys. 

Material: 

Die-cast zinc 

Packs of Model No. SZ 

1 2571.000 

Semi-cylinder lock 

for compact enclosures AE 

For retro-fitting to single-door enclosures 

with cam lock. 

The cover plate is locked by semi-cylinders 

with a total length of 40/45 mm (to 

DIN 18 254). An additional cover protects 

the cylinder against dirt. The protection 

category of the enclosure is not impaired. 

Supplied without semi-cylinder. 

Material: 

Die-cast zinc 

Design 

Model No. SZ 

RAL 7035 2534.100 

RAL 7032 2534.000 

Nickel-plated (matt) 2534.500 


European patent no. 0778 913 

with validity for GB, FR, IT 


Jap. patent no. 3.088.465 

Enclosure key 

For lock inserts (one double-bit key is 

supplied with every enclosure). 

Design 

Model No. SZ 

Double-bit key no. 5 2531.000 

Security key no. 3524 E 2532.000 



7 mm square 2547.000 

8 mm square 2548.000 

Daimler key 2521.000 

Fiat key 2308.000 

Universal enclosure key 

Double-bit, 8 mm square, 8 mm triangular 

(also for 7 mm inserts), with integral 

screwdriver. 


1 2549.000 


Wiring plan pocket 

made of plastic 

for AE 

For installation options, refer to table 

● B = Screw-fastened to the perforated door 

strip on both sides 

● E = Screw-fastened on one side, other 

side stuck with adhesive 

or stuck entirely with adhesive 

Accessories 

Doors 


2 holders with double-sided sticky tape, 

acrylic glazed pane, 

assembly parts. 

Note: 

The acrylic glazed pane may be shortened 

to any required size for shorter doors. 

Model No. SZ 2514.500 2514.600 2514.800 

Usable width mm 340 415 615 

Usable depth mm 18 18 18 

Height of acrylic glazed pane mm 167 167 167 

Installation options: 

For Model No. AE Width mm 

1050.500 500 B – – 

1057.500 500 B – – 

1058.500 600 E E – 

1060.500 600 E E – 

1073.500 760 E E – 

1076.500 600 E E – 

1077.500 760 E E – 

1090.500 600 E E – 

1100.500 1000 B – – 

1110.500 1000 B – – 

1114.500 1000 B 1) – – 

1130.500 1000 B – – 

1180.500 800 E E E 

1213.500 1000 B 1) – – 

1260.500 600 E B – 

1280.500 800 E E B 

1350.500 500 B – – 

1360.500 600 E E – 

1376.500 600 E E – 

1) Prepared for the installation in the l/h side door; for installation in the r/h side door, the 

acrylic glazed pane can be shortened. 

Hinges 180° 

For retrospective conversion of standard 

doors with 130° hinges. 


For AE 

Material: 

Die-cast zinc 


2 2449.000 


49

Accessories 

Locks/roof/wall mounting 

Hinge pin remover 

For safe and easy removal of hinge pins. 

For enclosure Model No. SM 

AP/AK 2431.000 

AE/FM 2432.000 

Eyebolts 

for AE, AK 

For crane transportation of enclosures, with 

reinforcement plate to be inserted 

underneath. 

Thread: M12 


Eyebolts, reinforcement plates. 


4 2509.000 

Eyebolts 

for CM 

For crane transportation of enclosures, with 

reinforcement plate to be inserted 

underneath. 

Thread: M12 


Eyebolts, reinforcement plates. 


2 2509.500 


For the attachment of KL, EB, BG and EL 

enclosures as well as DK and FM wallmounted 

distributors. 


Assembly parts for mounting on the 

enclosure. 

Note: 

For hygiene reasons, and in view of the 

protection category, the stainless steel 

enclosures do not have any drilled holes for 

the wall mounting brackets. 

Material 

Brass 

nickelplated 

Sheet steel 

zinc-plated, 

passivated 

Stainless 

steel 1.4301 

(AISI 304) 

Wall 

distance 

mm 

Packs 

of 

Model No. 

KL 

8 4 1580.000 

8 4 1590.000 

8 4 1594.000 


For the attachment of KL, EB, BG, AE, CM 

and EL enclosures as well as DK and FM 

wall-mounted distributors. 



enclosure. 

Note: 

For hygiene reasons, and in view of the 

protection category, the stainless steel 

enclosures do not have any drilled holes for 

the wall mounting brackets. 

Material 

Sheet steel 

zinc-plated, 

passivated 

Wall 

distance 

mm 

40 

10 

Packs 

of 

Model No. 

SZ 

1 2503.000 1) 

4 2503.010 

1 2508.000 1) 

4 2508.010 

Stainless 

steel 1.4301 10 4 2433.000 

(AISI 304) 

1) Without assembly parts. 


Accessories 

Wall mounting 


for KS 

For attachment to the wall, only possible 

from the outside of the enclosure. 

Material: 

Fibreglass-reinforced polyamide 1) 



enclosure. 

Colour 


of KS/KE 

Sim. to RAL 7032 4 1483.000 

Sim. to RAL 9011 4 9266.000 1) 

1) With graphite additive for Ex applications. 

Wall angle 

For compact enclosures (additional holes 

required in the enclosure). 

Material Colour 


of SZ 

Sheet steel 

RAL 7035 1 2505.500 

RAL 7032 1 2505.200 


1.4301 

(AISI 304) 

– 1 2583.000 

Wall bracket 

For wall attachment of TS and ES enclosures 

at the roof, e. g. with heavy components on 

the door. 

Material: 


Packs of Model No. PS 

4 4595.000 

Pole clamp 

For reliable, convenient fastening to round or 

square poles. 

For pole diameter / size: 

Ø from 40 to 190 mm 

□ from 50 to 150 mm 

Material: 

Mounting angles, clamping section: 


Clamping strap: Stainless steel 1.4301 

(AISI 304) 

For KL, EB, BG, AE, KS 


2 mounting angles, 600 mm long 

4 clamping sections, 

2 clamping straps, 

4 clamping brackets, 

4 screws and nuts M8 

for mounting on the enclosure. 


1 set 2584.000 


51

Accessories 

Interior installation 

Mounting plates 

for KL 

For component installation outside of the 

enclosure. Assembly screws included as 

accessories with the enclosure. 

Material: 

Sheet steel, 2 mm, zinc-plated, passivated 

Accessories: 

Self-tapping screws SZ 2487.000, 

see page 55. 

Possible 

alternative: 

Support rails, 

see page 53. 

G1 

1 

14.5 

23.5 

F2 

18.5 

6.6 

1 

F1 

F2 

12.5 

8.2 

Attachment in the centre 

only for 125 mm wide 

plates 

42.5 

For size 

Dimensions in mm Model No. 

For Model No. KL 

mm 

G1 F1 F2 KL 

150 x 150 1500.510, 1514.510, 1521.010 135 125 – 1560.700 

200 x 150 1528.510, 1529.510 185 125 – 1575.700 

300 x 150 

1501.510, 1515.510, 1522.010, 

1530.510 

285 125 – 1561.700 

400 x 150 1589.510 385 125 – 1576.700 

200 x 200 1502.510, 1516.510, 1523.010 185 175 50 1562.700 

300 x 200 

1503.510, 1517.510, 1524.010, 

1531.510 

285 175 50 1563.700 

400 x 200 

1504.510, 1518.510, 1525.010, 

1532.510 

385 175 50 1564.700 

500 x 200 1505.510, 1533.510 485 175 50 1565.700 

600 x 200 1506.510, 1519.510, 1534.510 585 175 50 1566.700 

800 x 200 1527.510, 1542.510 785 175 50 1574.700 

300 x 300 1507.510, 1526.010, 1535.510 285 275 50 1567.700 

400 x 300 1508.510, 1536.510 385 275 50 1568.700 

500 x 300 1509.510, 1537.510 485 275 50 1569.700 

600 x 300 1510.510, 1538.510 585 275 50 1570.700 

400 x 400 1511.510, 1539.510 385 375 62.5 1571.700 

600 x 400 1512.510, 1540.510 585 375 62.5 1572.700 

800 x 400 1513.510, 1541.510 785 375 62.5 1573.700 


for Premium KL 

For installing at a distance from the rear 

panel. 

Material: 



Spacer bolts 

and assembly parts. 

For W (B) H Packs Model No. 

KL enclosures mm mm of KL 

1024.010 

1024.020 

100 100 1 1024.910 

1024.030 250 150 1 1024.920 

1024.040 350 250 1 1024.930 


mounting 

B 

12.5 

25 

H 

12.5 

1 

1 

Spacer bolts 

M5 x 15 

12.5 

12.5 


Accessories 


Mounting bracket 

for Premium KL 

For variable attachment of support rails on a 

12.5 mm pitch pattern. 

Material: 

Stainless steel 1.4301 (AISI 304) 



For 

L N Packs Model No. 

KL enclosures 

of KL 

1024.010 

1024.020 

85 6 2 1024.810 

1024.030 135 10 2 1024.820 

1024.040 235 18 2 1024.830 

36.5 

L 

N x 12.5 = H3 

1 

1 

Variable to 

mounting 

bracket 

15 

25 

6 

5.5 

Support rails TS 35/7.5 

and TS 35/15 

to EN 50 022 

for KL, AE 

Length sized to the enclosure width. 

For 

enclosure 

width 

mm 

Support rails 

length 

mm 

Version 

Packs of 

Model No. 

SZ 

150 137 

10 2314.000 

200 187 10 2315.000 

TS 35/7.5 

300 287 10 2316.000 

400 387 10 2317.000 

500 487 

10 2318.000 

TS 35/15 

600 587 10 2319.000 

Support rails 

to EN 50 022 

Fixed length 2 m 

Version Length 


of SZ 

TS 35/15 2 m 6 2313.150 

TS 35/7.5 2 m 6 2313.750 

Mounting clip 

for support rails 

For fast, secure attachment of: 

● Cable ducts 

● Mounting plates 

● Mounting angles 

on support rail TS 35/7.5 and TS 35/15 to 

EN 50 022. 

Simply pre-assemble the mounting clip on 

the part to be installed, then snap into 

position on the support rail. 


30 2309.000 


European patent no. 0 776 077 

with validity for ES, FR, IT, SE 


53

Accessories 


Mounting plates 

Screw-fastened, small 

Material: 



Assembly screws. 


4 4532.000 

Rail mounting bracket 

for individual rail mounting. 

Material: 


Cable retainer Packs of Model No. SZ 

Flat 20 2365.000 

Inclined 20 2366.000 

35 

M5 

35° 

M6 

47 

Ø 7 

30 

Ø 7 

60 

73 

60 

81 

Universal bracket 

For installing 

● Enclosure lights in 

− Compact enclosures AE and AK 

− Compact system enclosures Rittal CM 

− Console systems AP 

● Door-operated switches in 

− Compact enclosures AE 


● Cable conduit holder SZ 2593.000 and 

SZ 2591.000 in 

− Compact enclosures AE 


● Support rails for terminals in 

− Operating housings and command 

panel housings with door. 

Mounting screws are concealed when the 

door is closed. Existing holes for mounting 

blocks or hinges may be used with AE. 

Material: 





6 2373.000 

45 

28 Ø 4.2 

8 


Accessories 


Mounting block 

for AE 

As an accessory for additional interior 

installation, e.g. mounting of cable ties, 

PS punched rails, top hat rails and C rails 

(e.g. for a second pair of mounting angles). 




20 2574.000 

Threaded inserts M6 

for KS 

For securing installed equipment to the 

moulded bosses in the door and in the 

enclosure rear panel. 

Screw length available for insertion: 8 mm. 

Packs of Model No. KS 

20 1482.000 

Self-tapping screws 

Mark, drill and tighten in a single operation 

using electric or pneumatic tools. 

For metal thickness: 0.8 – 3 mm 

Length: 16 mm 

Usable length: 9.5 mm 

Width across flats: 8 mm 

Dimensions 

mm 


ST 4.8 x 16 300 2487.000 

Captive nuts M5/M6 

For the attachment of rack-mounted 

electronic, equipment, 482,6 mm (19˝) 

installed equipment and blanking plates to 

the mounting angles, 482.6 mm (19˝). 

For use with metal thickness from 

0.8 – 2.0 mm. In areas of narrow tolerance, 

captive nuts for metal thicknesses of 

1.2 – 1.5 mm should be used. Optionally 

with or without contact of the installed 

equipment to the 482.6 mm (19˝) section/ 

enclosure. 

Captive nut M5 

Design 

with 

contact 

without 

contact 

For metal 

thicknesses 

mm 

Packs 

of 

Model No. 

EL 

0.8 – 2.0 50 2094.500 

0.8 – 2.0 50 2092.500 

Captive nut M6 

Design 

For metal 


thicknesses 

of EL 

mm 

with 

contact 

0.8 – 2.0 50 2094.200 

without 

contact 

0.8 – 2.0 50 2092.200 

with 

contact 

1.2 – 1.5 50 2094.300 

without 

contact 

1.2 – 1.5 50 2092.300 


55

Accessories 


System lights 

For mounting in AE, AK and AP using 

universal bracket SZ 2373.000. 

Light: 

Universal white 


IP 20 to EN 60 529/10.91 


Connection accessories, see page 58. 

Accessories: 

Adaptor bracket, see Catalogue 31, 

page 931. 

Universal bracket, see page 54. 

Components 

Standard 

light 

Courtesy 

light 

Universal 

light 

System light 

Sockets and connectors for: 

– Power supply 

– Through-wiring 

– Facility for connecting a door-operated switch 

Jack for normally open contact 

Motion sensor 

 

Interference suppression via: 

– Radio interference suppression capacitor 

– Full-electronic ballast 

Additional manual switching with rocker or slide switch 

Light cover 

Light cone adjustment 

 

Individual voltage supply 110 – 240 V 

Standard light 

Technical 


Socket 

specifications 

mm mm mm SZ 

Approvals 

14 kW, 230 V, 50 Hz Yes 452 117 50 4138.140 ENEC 

18 kW, 230 V, 50 Hz Yes 682 117 50 4138.180 ENEC 

30 kW, 230 V, 50 Hz Yes 987 117 50 4138.300 ENEC 

With fluorescent lamp, socket G 13, length 375/604/908 mm 

Courtesy light 

Technical 


Socket 


mm mm mm SZ 

Approvals 

14 W, 100 – 240 V, 

50/60 Hz 

Yes 452 117 50 4139.140 ENEC 

18 W, 100 – 240 V, 

50/60 Hz 

Yes 682 117 50 4139.180 ENEC 

30 W, 100 – 240 V, 

50/60 Hz 

Yes 987 117 50 4139.300 ENEC 

With fluorescent lamp, socket G 13, length 375/604/908 mm 


Universal light 

Accessories 


Technical 

Model No. 

Socket W mm H mm D mm Approvals 


SZ 

Yes 345 95 55 4155.100 VDE 

26 W, 110 – 240 V, 

No 345 95 55 4155.000 VDE 

50 – 60 Hz 

No 345 95 55 4155.500 UL 

With compact fluorescent lamp, TC-DEL 26 W, base G24q-3, length 174 mm 

System light with 

filament tube (Linestra) 

Technical specifications Socket W mm H mm D mm 

Model No. 

SZ 

35 W, 230 V AC/DC No 380 59 41 4103.350 1) 

60 W, 230 V AC/DC No 580 59 41 4103.600 2) 

With filament tube. 

1) base 35 S14s, length 300 mm 

2) base 60 S14s, length 500 mm 


57

Accessories 


Connection accessories 

The following components can be used for 

time-saving and simple installation of the 

lights: 

Accessories: 

Cable ties for quick assembly, 

see page 68. 

Connection cable 

for 

Power supply 

(with socket, without connector) 

Power supply 

(with jack and strain relief, 

without connector) 

Length 

mm 

Packs 

of 

Model No. SZ 

Orange Yellow Grey 

3000 5 4315.100 4315.110 – 

3000 1 – – 4315.150 

Door-operated switch 

Length Packs Model No. SZ 

with mounting accessories 

mm of Orange Yellow 

600 

4315.500 4315.510 

With connection cable 

1000 1 4315.300 4315.310 

Without connection cable – 4127.000 

Connection component with circuit-breaker 10 A 

Reduce assembly costs: 

Power is supplied quickly and reliably to system lights via the 

connection cable. 

For independently configured cables, connector SZ 2507.200 must 

be used. 

Connection component to be snapped onto the top hat rail. 

Model No. 

Packs of 

SZ 

1 2507.500 

For self-assembly Packs of Model No. SZ 

Sockets for power supply 

2507.100 

5 

Connector for door operated switch cable 2507.400 


Accessories 

Interior installation/cable management 

Earth straps 

For configuring a reliable earthing 

connection with perfect contact. 

● With ring terminals in M6 and M8 to match 

the earthing screw 

● Length-optimised and ready to install 

For Door/lid Enclosures 

KL, EB, 

AE 1032.XXX, M6 M6 

AE 1035.XXX 

AE, AP M6 M8 

TS, ES, PC, 

AP universal 

console, KE 

M8 M8 

Length 

mm 


of SZ 

M8 – M8 4 170 5 2564.000 

M8 – M8 16 170 5 2565.000 

M8 – M8 25 170 5 2566.000 

M6 – M6 10 200 5 2565.100 

M8 – M8 4 300 5 2567.000 

M6 – M8 10 300 5 2565.110 

M8 – M8 10 300 5 2565.120 

M8 – M8 16 300 5 2568.000 

M8 – M8 25 300 5 2569.000 

Earthing strap 

Tin-plated copper, in various lengths and 

cross-sections with press-fitted contact 

rings. Earthing straps counteract the current 

displacement effect at high frequencies, 

whilst at the same time offering highly 

flexible connection opportunities. 

For 

Connection 

Crosssection 

mm 2 

Crosssection 

Length 

mm 

mm 2 

Packs 

of 

Model No. 

SZ 

M6 10 200 10 2412.210 

M8 16 200 10 2412.216 

M8 25 200 10 2412.225 

M6 10 300 10 2412.310 

M8 16 300 10 2412.316 

M8 25 300 10 2412.325 

Contact washers 

Toothed contact washers facilitate secure PE 

conductor connection. As a result, there is 

no need to manually strip paint in the 

connection area. 

Size Packs of Model No. SZ 

M5 100 2343.000 

M6 100 2334.000 

M8 100 2335.000 

Cable entry plates 

For 

● Cable entry grommets 

● Connector grommets 

instead of segments of the standard divided 

gland plates. 

Material: 




Suitable for installation in TS, CM and 

PC enclosures based on TS 

Enclosure 

width 

mm 

Cut-outs 

per plate 

Packs 

of 

Model No. 

TS 

600 5 2 8800.060 

800 8 2 8800.080 

1000 4 4 8800.100 

1200 6 4 8800.120 


59

Accessories 

Cable management 

Cable entry grommets 

In conjunction with the cable entry plate, 

simple and fast sealing of cables inserted in 

the base area of enclosures. 

Material: 

Body: Polypropylene 

Cover: Thermoplastic elastomer 


IP 55 subject to correct mounting. 

Cables per max. Ø Packs Model No. 

grommet mm of PS 

8 13 25 4316.000 

3 21 25 4317.000 

1 47 25 4318.000 


European patent no. 0560119 

with validity for FR, GB, IT, NL 

Japan. Patent no. 2533052 


Connector grommets 

Suitable for cable diameters from 8 to 

36 mm. 

Material: 

Outer cover: Polypropylene covered with 

thermoplastic elastomer 

Seal: Cellular rubber 




10 4311.000 


Italian patent no. 127 3503 

French patent no. 2 716 583 

Foam rubber cable clamp strip 

For sealing the cable entry between the 

gland plates. Particularly suitable for 

identical cable cross-sections. 

Material: 

Seal PU foam, 

cross-section: 30 x 30 mm 




3 m 2573.000 

Section for cable entry 

for TS, CM 

For mounting on top of the gland plates 

existing in the enclosure. The better 

alternative to the foam rubber cable clamp 

strip, thanks to: 

● Easier mounting 

● Full-surface support 

● High level of sealing of cables inserted 

into the enclosure. 

Material: 

Extruded aluminium section, 

seal PU foam, 




For 

enclosure width Packs of Model No. TS 

mm 

600 2 8802.060 

800 2 8802.080 

1000 4 8802.100 

1200 4 8802.120 


Accessories 


Section for cable entry, rear 

for TS, CM 

Unlike the section for cable entry, centre, the 

rear section is mounted directly onto the 

base opening. In this way, when installing 

the mounting plate in the rearmost position 

(TS) or with CM, the cable may be routed 

directly on a cable clamping rail with no 

large radii. In conjunction with the new cable 

clamp rail, see page 36, optimum 

adjustment between the cable entry and 

mounting plate can be achieved. 

Material: 

Extruded aluminium section, 

seal PU foam, 




For 

enclosure width Packs of Model No. TS 

mm 

600 1 set 8802.065 

800 1 set 8802.085 

1000 2 sets 8802.105 

1200 2 sets 8802.125 


1 set = 

1 section for base opening, 

1 section for base plate, 

each with bonded seal. 

Plastic cable gland plates 

With prepunched PG holes for cable glands. 

Used for sealing standard gland plates. 

Temperature range: 

suitable for use from –40°C to +70°C. 

Material: 

SZ 2560.000, SZ 2561.000 = PS 

SZ 2562.000 = ABS 

SZ 2563.000 = Polyamide, glass bead 

reinforced 

Colour: 

RAL 7035 

Size For 


of SZ 

1 AE 1032.500, AE 1035.500 10 2560.000 

3 AE 1030.500, AE 1031.500, AE 1380.500, AE 1038.500 10 2561.000 

4 

AE 1110.500, AE 1114.500, AE 1338.500, AE 1100.500, 

AE 1045.500, AE 1057.500, AE 1050.500, AE 1130.500, 

AE 1213.500, AE 1350.500, CS 9771.111, CS 9771.115, 5 2562.000 

CS 9751.145, CS 9751.165, CS 9774.200, CS 9774.210, 

CS 9774.250, CS 9774.400, CS 9774.410, CS 9774.450 

5 

AE 1039.500, AE 1339.500, AE 1060.500, AE 1076.500, 

AE 1077.500, AE 1180.500, AE 1058.500, AE 1090.500, 

AE 1360.500, AE 1376.500, AE 1073.500, AE 1260.500, 

AE 1280.500, EL 1919.200, EL 1920.200, EL 1926.200, 

DK 7011.535, DK 7012.535, DK 7013.535, DK 7014.535, 

DK 7644.000, DK 7641.000, DK 7643.000, DK 7645.000, 

CS 9772.111, CS 9772.115 

5 2563.000 

Size 1 

Size 3 

70 

45 120 

330 

120 

339 

49.5 

120 

120 

149 

133 

8 

56 7 

25 

160 

110 

90 

75 7.5 

Pg 11 

Pg 13.5 

Pg 16 

Pg 21 

Pg 29 

Pg 36 

Size 4 

Size 5 

530 

45 110 110 110 110 

149 

133 

8 


61

Accessories 


Plastic cable gland plates 

for KL and small fibre-optic distributors 

based on AE. 

With prepunched PG holes for cable glands. 

Used for sealing standard gland plates. 

Temperature range: 

suitable for use from –40°C to +70°C. 

Material: 

ABS 

Colour: 

RAL 7035 

KL 1581.000 

Ø 5 

220 

202 


Size PG No. 

of KL 

13.5 12 5 1581.000 

2 13.5 6 

16 2 5 1582.000 

21 2 

KL 1582.000 

90 

72 

PG 

13.5 

76 

PG PG PG PG PG 

13.5 21 16 13.5 13.5 

PG 

13.5 

PG 

13.5 

PG 

16 

PG 

21 

PG 

13.5 

Plastic gland plates 

with membranes 

for AE, EL, DK, CS 

Simply pierce the plastic with a sharp 

object, and pull through the cable. 

Material: 

Plastic to UL 94-V2 

Colour: 

Similar to RAL 7035 


IP 65 with careful cable entry. 

Size For 


of SZ 

3 AE 1030.500, AE 1031.500, AE 1038.500, AE 1380.500 1 2561.500 

4 

AE 1045.500, AE 1050.500, AE 1057.500, AE 1100.500, 

AE 1110.500, AE 1114.500, AE 1130.500, AE 1213.500, 

AE 1338.500, AE 1350.500, CS 9771.111, CS 9771.115, 1 2562.500 

CS 9751.145, CS 9751.165, CS 9774.200, CS 9774.210, 

CS 9774.250, CS 9774.400, CS 9774.410, CS 9774.450 

5 

AE 1039.500, AE 1058.500, AE 1060.500, AE 1073.500, 

AE 1076.500, AE 1077.500, AE 1090.500, AE 1180.500, 

AE 1260.500, AE 1280.500, AE 1339.500, AE 1360.500, 

AE 1376.500, EL 1919.200, EL 1920.200, EL 1926.200, 

DK 7011.535, DK 7012.535, DK 7013.535, DK 7014.535, 

DK 7641.000, DK 7643.000, DK 7644.000, DK 7645.000, 

CS 9772.111, CS 9772.115 

1 2563.500 

Size 3 Size 4 

45 

7.5 

Size 5 

120 

Ø 7.2 

330 

120 

75 

90 

534 

47 110 110 110 110 

Ø 7.2 

8 

49.5 

8 

133 

149 

120 

Ø 7.2 

339 

120 

133 

149 

Diameter 

mm 

Number 

of cable entries for 

Model No. SZ 

2561.500 2562.500 2563.500 

5 – 9 – – 18 

6 – 11 17 – – 

7 – 12 – 24 16 

10 – 15 27 48 36 

15 – 21 2 4 – 

15 – 24 – – 6 

15 – 25 – 8 – 

16 – 25 4 – – 

19 – 34 2 – – 

23 – 30 – – 2 

26 – 35 – 4 2 

26 – 54 – – 4 

50 – 110 – – 1 


Accessories 



Pre-punched 

for AE, EL, DK, CS 

Simply knock out the holes for the cable 

glands using a screwdriver. 

Material: 

Sheet steel 

Colour: 

RAL 7035 


IP 66 when mounting in the usual position, 

bottom. 

Accessories: 

Cable glands made from polyamide or 

brass, see page 65. 

Size 

For 

Packs 

of 

Model No. 

SZ 

2 

KL 1530.510, KL 1531.510, KL 1532.510, KL 1533.510, 

KL 1534.510, KL 1535.510, KL 1536.510, KL 1537.510, 

KL 1538.510, KL 1539.510, KL 1540.510, KL 1541.510, 

1 1581.100 

KL 1542.510 

3 AE 1030.500, AE 1031.500, AE 1038.500, AE 1380.500 1 2561.100 

4 

AE 1045.500, AE 1050.500, AE 1057.500, AE 1100.500, 

AE 1110.500, AE 1114.500, AE 1130.500, AE 1213.500, 

AE 1338.500, AE 1350.500, CS 9771.111, CS 9771.115, 1 2562.100 

CS 9751.145, CS 9751.165, CS 9774.200, CS 9774.210, 

CS 9774.250, CS 9774.400, CS 9774.410, CS 9774.450 

5 

AE 1039.500, AE 1058.500, AE 1060.500, AE 1073.500, 

AE 1076.500, AE 1077.500, AE 1090.500, AE 1180.500, 

AE 1260.500, AE 1280.500, AE 1339.500, AE 1360.500, 

AE 1376.500, EL 1919.200, EL 1920.200, EL 1926.200, 

DK 7011.535, DK 7012.535, DK 7013.535, DK 7014.535, 

DK 7641.000, DK 7643.000, DK 7644.000, DK 7645.000, 

CS 9772.111, CS 9772.115 

1 2563.100 

Size 2 Size 3 

221 

330 

90 

72 9 

9.5 

101 101 

76 7 

90 

75 7.5 

45 

120 

120 

7.5 315 

Size 4 Size 5 

339 

534 

49.5 120 

120 

47 

110 

110 

110 

110 

149 

8 

133 

149 

133 8 

8 323 8 

518 

Diameter 

Number of cable entries for 

Model No. SZ 

1581.100 2561.100 2562.100 2563.100 

M12 – – – 1 

M16 – – 2 – 

M20 12 9 5 12 

M25 – 4 13 11 

M32 – 2 2 8 

M40 – – 2 4 


63

Accessories 



For 

● KL terminal boxes, see page 13. 

● CP pillar, see Catalogue 31, page 236. 

● IW enclosures, see Catalogue 31, 

page 240 – 255. 

Material: 

Sheet steel, spray finished 

Colour: 

RAL 7035 

Cut-out 


of KL 

Without 6 1158.500 

1 x connector, 

16-pole 

6 1158.560 

1 x connector, 

24-pole 

6 1158.540 

3 x module plates 6 1158.530 

Accessories: 

Module plates for individual cable entry, 

see page 64. 

Module plates 

for individual cable entry 

1 2 

3 4 

Fig. Design Material 

1 

With connector 

grommet for 2 cables 

with connectors up to 

d = 8.5 mm 

Module plate: 

Sheet steel, 

zinc-plated, passivated 

Connector gland: 

(For details, see SZ 2400.300, 

see Cat. 31, page 975) 


of BG 

1 1158.900 

2 Perforated for M25 

1158.910 

metric cable gland 

Sheet steel, zinc-plated, 

3 

M32 10 1158.920 

passivated 

4 Solid 1158.930 

5 For direct, 

2 + 21) Plastic module plate with 

1158.940 

strain relief and flexible 

IP-protected 

sealing membrane, including 1 

6 insertion of sensor/ 8 stoppers for any unused 

actuator cables 

2) 1158.950 

openings 

To fit Ø 

1) 2 cables from 6.8 to 8.8 mm and 

2 cables from 7.8 to 10.7 mm 

2) 8 cables from 3.8 to 6.3 mm 

5 6 


1 

2 

3 

4 

5 

Cable gland, brass 

Benefits: 

● Because the gland and lock nut are sold 

together in a single pack, this saves 

additional ordering and storage. 

● Clamping membranes for even tightening 

and strain relief which protects the cables. 

● Insulation thanks to plastic insert. 

● Optimum seal on the connection thread, 

thanks to O-ring. 

● The lock nut cuts automatically into the 

spray-finish, thereby creating a conductive 

connection. 

1 Top-hat nut 

2 Neoprene seal 

3 Plastic insert 

4 O-ring 

5 Lock nut 

Size 

Accessories 


Cable 

diameter 

mm 

Packs 

of 

Model No. 

SZ 

M12 x 1.5 3 – 6.5 15 2411.800 

M16 x 1.5 4.5 – 10 15 2411.810 

M20 x 1.5 6 – 12 10 2411.820 

M25 x 1.5 11 – 17 10 2411.830 

M32 x 1.5 15 – 21 5 2411.840 

M40 x 1.5 19 – 28 4 2411.850 

M50 x 1.5 27 – 38 2 2411.860 

M63 x 1.5 34 – 44 1 2411.870 

Material: 

Nickel-plated brass, neoprene seal 


IP 68 (5 bar, 30 min.) to EN 60 529/10.91 

Approval: 

VDE tested to EN 50 262 

1 

2 

3 

4 

5 

Cable gland, polyamide 

Benefits: 

● Because the gland and lock nut are sold 

together in a single pack, this saves 

additional ordering and storage. 

● Clamping membranes for even tightening 

and strain relief which protects the cables. 

● Spray-moulded sealing lip ensures an 

optimum seal against the enclosure. 

● Trapezoid thread for secure screwfastening 

of the top-hat nut. 

1 Top-hat nut 

2 Neoprene seal 

3 Trapezoid thread 

4 Sealing lip 

5 Lock nut 

Size 

Cable 

diameter 

mm 

Packs 

of 

Model No. 

SZ 

M12 x 1.5 3 – 6.5 50 2411.600 

M16 x 1.5 4.5 – 10 50 2411.610 

M20 x 1.5 6 – 12 50 2411.620 

M25 x 1.5 11 – 17 25 2411.630 

M32 x 1.5 15 – 21 15 2411.640 

M40 x 1.5 19 – 28 5 2411.650 

M50 x 1.5 27 – 38 5 2411.660 

M63 x 1.5 34 – 44 3 2411.670 

Material: 

Polyamide 6, neoprene seal 

Colour: 

RAL 7035 


IP 68 (5 bar, 30 min.) to EN 60 529/10.91 

Approval: 

VDE tested to EN 50 262 


65

Accessories 


Multi-seal inserts 

For the secure entry of several individual 

cables into a single cable gland. 

Material: 

Neoprene 

Size 

M20 

M25 

M32 

Cable diameter Number of 

mm 

cables 


3 4 25 2411.500 

4 3 25 2411.501 

5 3 25 2411.502 

6 2 25 2411.503 

3 7 25 2411.504 

4 6 25 2411.505 

5 4 25 2411.506 

6 3 25 2411.507 

3 9 25 2411.508 

4 9 25 2411.509 

5 6 25 2411.510 

6 6 25 2411.511 

Stoppers 

For the reliable sealing of unused cable 

entries. 

Simply insert into the multi-seal inserts 

instead of a cable, and clamp via the cable 

gland. 

Length 14 mm. 

Material: 

Polyamide 6 

Diameter 

mm 


3 25 2411.520 

4 25 2411.521 

5 25 2411.522 

6 25 2411.523 

Double-membrane gland 

For wall thicknesses from 1.5 to 4.5 mm 

A high protection category can be achieved 

with cable entry, thanks to the double seal. 

Material: 

Plastic to UL 94-HB 



For 

hole 

Sealing 

range 

mm 

Packs 

of 

Model No. 

SZ 

M16 5 – 9 50 2898.160 

M20 7 – 12 50 2898.200 

M25 9 – 16 50 2898.250 

M32 14 – 21 25 2898.320 

Stepped collar 

For wall thicknesses from 1.5 to 4.5 mm 

For cable entry, simply cut off at the required 

level to match the cable diameter. 

Material: 

Plastic to UL 94-HB 



For 

hole 

Sealing 

range 

mm 

Packs 

of 

Model No. 

SZ 

M20 5 – 16 100 2899.200 

M25 5 – 21 50 2899.250 

M32 13 – 26.5 25 2899.320 

M40 13 – 34 20 2899.400 


Accessories 


Connector gland 

for connector cut-outs (24-pole) 

For the entry of 2 pre-assembled cables in 

the connector cut-out, without dismantling 

the connector. 

For cable diameter from 8 – 36 mm. 

Material: 

Plastic 

Clamp terminals: Sheet steel, zinc-plated, 

passivated 


1 set = 

2 half-shells, including seals, 

with fastening clamp. 


1 set 2400.000 

Cable conduit and cable 

conduit holder 

For secure cable routing e.g. from the 

enclosure or mounting plate to the door. 

Option of attaching the cable conduit holder 

tailored to system punchings TS and to 

482.6 mm (19˝) pitch pattern with no drilling 

required. 

Attachment facility for standard 

commercially available cable ties is 

provided on the cable conduit holder, so that 

cables may be attached upon entry to/exit 

from the cable conduit. 

Material: 

Cable conduit: Polythene 

Cable conduit holder: polyamide 

Cable conduit holder: 


European patent no. 0 257 367 

with validity for DE, ES, FR, GB, IT 


Cable conduit 

Internal Ø mm 

Packs 

of 

Model No. SZ 

16 25 m 2595.000 

29 25 m 2589.000 

36 25 m 2596.000 

48 25 m 2590.000 

Cable conduit holder 

For cable conduit Packs 

Ø mm of 

Model No. SZ 

16 20 2593.000 1) 

29 20 2591.000 1) 

36 20 2594.000 

48 20 2592.000 

1) Installation in compact enclosures AE 

with universal bracket SZ 2373.000, 

see page 54. 

Cable fastening 

For professional, secure fastening of cables 

and conduits. 

For fastening: 

● Slide into the mounting rail 23 x 23 mm, 

● screw-fasten onto the round punchings of 

the enclosures, as well as all punched 

rails and punched sections. 

As the fastening attachments are bayable, 

several fastening attachments, even those of 

different sizes, can be assembled using just 

2 screws. 

Material: 

Polyamide 

For cable 

diameter 

from – to 


mm 

6 – 9 50 4319.090 

9 – 12 50 4319.120 

12 – 16 50 4319.160 

16 – 20 50 4319.200 


Posidrive raised countersunk screw 

M5 x 12 mm, SZ 2488.000, for screwfastening 

to the round system punchings, 


Accessories: 

Punched rail 23 x 23 mm, 



67

Accessories 

Cable management/miscellaneous 

Cable ties 

The super-fast solution for fastening cables 

to the enclosure profile or mounting system 

parts. Simply clip into the round system 

punchings. 

Length 

mm 


150 100 2597.000 

Metal cable ties 


D 

T max. 

Compact swing frame 

for AE, AP 

For the installation of electronic equipment, 

482.6 mm (19˝) across the entire height. 

Technical specifications: 

Torsionally stiff frame, welded from 

rectangular tube and triple-folded support 

section. 

Material: 

Sheet steel 

Colour: 

RAL 7035 


Double-bit lock insert and assembly parts. 

Accessories: 

41 mm lock insert, type C, 


For AE 

For compact enclosure AE Height units 6 U 11 U 14 U 

Enclosure 

Max. 

Model No. SR 2026.200 2027.200 2034.200 

Installation For enclosure height 

380 600 760 

Width Depth depth mm 

mm mm (T max.) H1 (mm) 320 542 676 

mm 

H2 (mm) 270 492 626 

600 210 145 

Spray-finished 1039.500 1060.500 1076.500 

Stainless steel 1009.500 1010.500 1012.500 

600 350 265 Spray-finished 1339.500 1360.500 1376.500 

760 210 145 Spray-finished – – 1077.500 

760 300 235 

Spray-finished – – 1073.500 

Stainless steel – – 1014.500 


Accessories 

Other 

Utility shelf 

Fastened with screws 

With support mat for: 

Measuring tools, writing equipment, mouse, 

scanner, small parts etc. 

For mounting on surfaces (doors, rear 

panels) via rear assembly holes. 

Material: 

Sheet steel 

Colour: 

RAL 7035 



52.5 

35 

Width (B) 

mm 

Model No. CP 

220 6514.110 

450 6514.100 

21.5 

20 

M6 

185 

150 

B 

150/375 

1 

1 

Additional central thread 

only for CP 6514.100 

Interface flap 

The compact alternative to the interface box. 

For secure accommodation of all standard 

sockets, computer ports, 3 1 / 2˝ or CD-ROM 

drives. 

The cast aluminium flap ensures a high 

mechanical load-bearing capacity, and 

guards against unauthorised access. 

For: 

● Any sufficiently large surface. 

Standard double-bit lock insert may be 

exchanged for lock inserts, 

see page 47. 

Material: 

Cover: Cast aluminium, finely textured 

Cover plate: Sheet steel 2 mm, zinc-plated, 

passivated 

Colour: 

RAL 7035 


IP 65 to EN 60 529/10.91 


Seal and assembly parts. 

View without flap 

6 

66 

66 

66 

1 


1 2482.200 

70 

max. 

54 

1 

max. 146 

189 

View with flap 

Surface for interface cut-outs 

81 

218 

11 

15 

22.5 


69

List of model numbers 

Model No. Page 

1002.600 31 

1004.600 31 

1005.600 31 

1006.600 31 

1007.600 31 

1008.600 31 

1009.600 31 

1010.600 31 

1012.600 31 

1013.600 31 

1014.600 31 

1016.600 31 

1017.600 31 

1018.600 31 

1019.600 31 

1024.010 16 

1024.020 16 

1024.030 16 

1024.040 16 

1024.810 53 

1024.820 53 

1024.830 53 

1024.910 52 

1024.920 52 

1024.930 52 

1030.500 27 

1031.500 27 

1032.500 27 

1033.500 27 

1034.500 27 

1035.500 27 

1038.500 28 

1039.500 27 

1045.500 28 

1050.500 28 

1050.900 25 

1057.500 28 

1058.500 28 

1060.500 28 

1073.500 28 

1076.290 18 

1076.500 28 

1077.500 28 

1090.500 28 

1100.500 29 

1101.010 30 

1101.020 30 

1101.030 30 

1101.040 30 

1101.910 43 

1101.920 43 

1101.930 43 

1101.940 43 

1110.500 29 

1114.500 29 

1130.500 29 

1158.500 64 

1158.530 64 


1158.540 64 

1158.560 64 

1158.900 64 

1158.910 64 

1158.920 64 

1158.930 64 

1158.940 64 

1158.950 64 

1180.500 28 

1213.500 29 

1260.500 29 

1280.500 29 

1338.500 28 

1339.500 27 

1350.500 28 

1360.500 28 

1376.500 28 

1380.500 27 

1400.600 33 

1423.600 32 

1432.600 32 

1434.600 32 

1444.600 32 

1446.600 32 

1448.600 32 

1449.600 32 

1453.600 32 

1454.600 32 

1466.600 33 

1467.600 33 

1468.600 33 

1469.600 33 

1479.600 33 

1480.600 33 

1482.000 55 

1483.000 51 

1490.000 46 

1500.510 13 

1501.510 13 

1502.510 13 

1503.510 13 

1504.510 13 

1505.510 13 

1506.510 13 

1507.510 13 

1508.510 13 

1509.510 13 

1510.280 18 

1510.510 13 

1511.510 13 

1512.510 13 

1513.510 13 

1514.510 13 

1515.510 13 

1516.510 13 

1517.510 13 

1518.510 13 

1519.510 13 


1521.010 15 

1522.010 15 

1523.010 15 

1524.010 15 

1525.010 15 

1526.010 15 

1527.510 13 

1528.510 13 

1529.510 13 

1530.510 14 

1531.510 14 

1532.510 14 

1533.510 14 

1534.510 14 

1535.510 14 

1536.510 14 

1537.510 14 

1538.510 14 

1539.510 14 

1540.510 14 

1541.510 14 

1542.510 14 

1545.500 17 

1546.500 17 

1547.500 17 

1548.500 17 

1549.500 17 

1550.500 17 

1551.500 17 

1552.500 17 

1553.500 17 

1554.500 17 

1555.500 17 

1556.500 17 

1557.500 17 

1558.010 26 

1558.510 23 

1559.010 26 

1559.510 23 

1560.700 52 

1561.700 52 

1562.700 52 

1563.700 52 

1564.700 52 

1565.700 52 

1566.700 52 

1567.700 52 

1568.700 52 

1569.700 52 

1570.700 52 

1571.700 52 

1572.700 52 

1573.700 52 

1574.700 52 

1575.700 52 

1576.700 52 

1577.500 17, 24 

1578.500 17, 24 


1579.500 17, 24 

1580.000 50 

1581.000 62 

1581.100 63 

1582.000 62 

1583.010 26 

1583.510 22 

1583.520 22 

1584.010 26 

1584.510 22 

1584.520 22 

1585.010 26 

1585.510 22 

1585.520 22 

1586.510 22 

1586.520 22 

1589.510 13 

1590.000 50 

1591.000 13 

1592.000 13 

1594.000 50 

1605.510 23 

1605.520 23 

1606.510 23 

1606.520 23 

1609.510 25 

1611.510 24 

2026.200 68 

2027.200 68 

2034.200 68 

2092.200 55 

2092.300 55 

2092.500 55 

2094.200 55 

2094.300 55 

2094.500 55 

2203.010 20 

2203.020 20 

2203.030 20 

2203.110 21 

2203.120 21 

2203.160 21 

2203.200 21 

2203.210 21 

2203.220 21 

2203.230 21 

2203.240 21 

2203.250 21 

2203.260 21 

2203.270 21 

2203.300 21 

2203.310 21 

2203.400 21 

2203.500 19 

2203.600 19 

2207.010 20 

2207.020 20 

2207.030 20 


2307.000 47 

2308.000 48 

2309.000 53 

2313.150 53 

2313.750 53 

2314.000 53 

2315.000 53 

2316.000 53 

2317.000 53 

2318.000 53 

2319.000 53 

2334.000 59 

2335.000 59 

2343.000 59 

2365.000 54 

2366.000 54 

2373.000 54 

2400.000 67 

2411.500 66 

2411.501 66 

2411.502 66 

2411.503 66 

2411.504 66 

2411.505 66 

2411.506 66 

2411.507 66 

2411.508 66 

2411.509 66 

2411.510 66 

2411.511 66 

2411.520 66 

2411.521 66 

2411.522 66 

2411.523 66 

2411.600 65 

2411.610 65 

2411.620 65 

2411.630 65 

2411.640 65 

2411.650 65 

2411.660 65 

2411.670 65 

2411.800 65 

2411.810 65 

2411.820 65 

2411.830 65 

2411.840 65 

2411.850 65 

2411.860 65 

2411.870 65 

2412.210 59 

2412.216 59 

2412.225 59 

2412.310 59 

2412.316 59 

2412.325 59 

2431.000 50 

2432.000 50 


2433.000 50 

2435.000 46 

2439.000 47 

2449.000 49 

2450.000 46 

2451.000 46 

2452.000 46 

2454.000 46 

2455.000 46 

2460.000 47 

2460.650 47 

2461.000 47 

2462.000 47 

2463.000 47 

2464.000 47 

2465.000 47 

2466.000 47 

2467.000 46 

2468.000 46 

2469.000 46 

2482.200 69 

2487.000 55 

2503.000 50 

2503.010 50 

2505.200 51 

2505.500 51 

2507.100 58 

2507.400 58 

2507.500 58 

2508.000 50 

2508.010 50 

2509.000 50 

2514.500 49 

2514.600 49 

2514.800 49 

2521.000 48 

2531.000 48 

2532.000 48 

2533.000 47 

2534.000 48 

2534.100 48 

2534.500 48 

2545.000 48 

2546.000 48 

2547.000 48 

2548.000 48 

2549.000 48 

2560.000 61 

2561.000 61 

2561.100 63 

2561.500 62 

2562.000 61 

2562.100 63 

2562.500 62 

2563.000 61 

2563.100 63 

2563.150 20 

2563.500 62 


List of model numbers 


2564.000 59 

2565.000 59 

2565.100 59 

2565.110 59 

2565.120 59 

2566.000 59 

2567.000 59 

2568.000 59 

2569.000 59 

2571.000 48 

2572.000 47 

2573.000 60 

2574.000 55 

2575.000 47 

2576.000 47 

2583.000 51 

2584.000 51 

2589.000 67 

2590.000 67 

2591.000 67 

2592.000 67 

2593.000 67 

2594.000 67 

2595.000 67 

2596.000 67 

2597.000 68 

2730.000 45 

2731.000 45 

2732.000 45 

2733.000 45 

2734.000 45 

2735.250 44 

2735.500 44 

2735.509 44 

2735.510 44 

2735.520 44 

2735.530 44 

2735.540 44 

2735.560 44 

2735.570 44 

2735.580 44 

2735.590 44 

2736.500 44 

2736.509 44 

2736.510 44 

2736.520 44 

2736.530 44 

2736.540 44 

2736.580 44 

2736.590 44 

2740.000 45 

2741.000 45 

2742.000 45 

2743.000 45 

2744.000 45 

2745.000 45 

2746.000 45 

2760.000 45 


2761.000 45 

2762.000 45 

2763.000 45 

2780.000 43 

2781.000 43 

2782.000 43 

2784.000 43 

2785.000 43 

2786.000 43 

2787.000 43 

2788.000 43 

2789.000 43 

2796.000 43 

2801.200 41 

2802.200 41 

2816.200 41 

2818.200 41 

2826.200 41 

2828.200 41 

2841.200 41 

2842.200 41 

2851.200 41 

2852.200 41 

2863.200 41 

2864.200 41 

2891.200 41 

2892.200 41 

2898.160 66 

2898.200 66 

2898.250 66 

2898.320 66 

2899.200 66 

2899.250 66 

2899.320 66 

2899.400 66 

2901.200 41 

2902.200 41 

2911.200 41 

2912.200 41 

2921.200 41 

2922.200 41 

2961.200 41 

2962.200 41 

4103.350 57 

4103.600 57 

4127.000 58 

4138.140 56 

4138.180 56 

4138.300 56 

4139.140 56 

4139.180 56 

4139.300 56 

4155.000 57 

4155.100 57 

4155.500 57 

4311.000 60 

4315.100 58 

4315.110 58 


4315.150 58 

4315.300 58 

4315.310 58 

4315.500 58 

4315.510 58 

4316.000 60 

4317.000 60 

4318.000 60 

4319.090 67 

4319.120 67 

4319.160 67 

4319.200 67 

4532.000 54 

4595.000 51 

5001.050 38 

5001.051 38 

5001.052 38 

5001.053 38 

5001.054 38 

5001.060 37 

5001.061 37 

5001.062 37 

5001.063 37 

5001.064 37 

5001.080 36 

5001.081 36 

5001.082 36 

5001.083 36 

5001.100 36 

5001.110 36 

5001.120 36 

5001.130 36 

5001.140 36 

5001.150 36 

5001.160 36 

5001.210 35 

5001.211 35 

5001.212 35 

5001.213 35 

5001.214 35 

5001.215 35 

5001.216 35 

5001.217 35 

5001.218 35 

5001.219 35 

5001.220 35 

5001.221 35 

5001.222 35 

5001.223 35 

5001.224 35 

5001.225 35 

5001.226 35 

5001.227 35 

5001.228 35 

5001.229 35 

5110.500 34 

5111.500 34 

5112.500 34 


5113.500 34 

5114.500 34 

5115.500 34 

5116.500 34 

5117.500 34 

5118.500 34 

5119.500 34 

5120.500 34 

5121.500 34 

5122.500 34 

5123.500 34 

6514.100 69 

6514.110 69 

7077.000 36 

7078.000 36 

7097.000 36 

7097.220 36 

7097.260 36 

7097.300 36 

7097.340 36 

7098.000 36 

7098.100 36 

7099.000 36 

8800.060 59 

8800.080 59 

8800.100 59 

8800.120 59 

8802.060 60 

8802.065 61 

8802.080 60 

8802.085 61 

8802.100 60 

8802.105 61 

8802.120 60 

8802.125 61 

9100.210 9 

9101.210 9 

9102.210 9 

9103.210 9 

9104.210 9 

9105.150 10 

9105.210 9 

9105.700 10 

9106.150 10 

9106.210 9 

9106.700 10 

9107.150 10 

9107.210 9 

9107.700 10 

9108.210 9 

9108.350 10 

9108.700 10 

9110.210 9 

9110.350 10 

9110.700 10 

9111.210 9 

9111.350 10 

9111.700 10 


9112.210 9 

9112.350 10 

9112.700 10 

9113.210 9 

9113.350 10 

9113.700 10 

9114.210 9 

9114.700 10 

9116.210 9 

9116.350 10 

9116.700 10 

9117.210 9 

9117.350 10 

9117.700 10 

9118.210 9 

9118.350 10 

9118.700 10 

9119.210 9 

9121.122 11 

9121.160 11 

9121.230 11 

9122.424 11 

9123.000 11 

9123.100 11 

9266.000 51 

9500.000 4 

9500.050 6 

9501.000 4 

9502.000 4 

9503.000 4 

9504.000 4 

9504.100 4 

9505.000 4 

9506.000 4 

9506.100 4 

9507.000 4 

9507.100 4 

9508.000 4 

9508.050 6 

9508.100 4 

9509.000 4 

9509.100 4 

9510.000 4 

9510.100 4 

9511.000 4 

9511.100 4 

9512.000 4 

9512.100 4 

9513.000 4 

9513.100 4 

9514.000 5 

9514.050 6 

9514.100 5 

9515.000 5 

9515.100 5 

9516.000 5 

9516.100 5 

9517.000 5 


9517.100 5 

9518.000 5 

9518.100 5 

9519.000 5 

9519.100 5 

9520.000 5 

9520.100 5 

9521.000 5 

9521.050 6 

9521.100 5 

9522.000 5 

9522.100 5 

9523.000 5 

9523.100 5 

9524.000 5 

9524.100 5 

9530.000 4 

9531.000 4 

9540.000 7 

9541.000 7 

9542.000 7 

9543.000 7 

9544.000 7 

9545.000 7 

9546.000 7 

9547.000 7 

9548.000 7 

9549.000 7 

9550.000 7 

9551.000 7 

9552.000 7 

9553.000 7 

9560.000 8 

9561.000 8 

9562.000 8 

9563.000 8 

9564.000 8 

9565.000 8 

9566.000 8 

9567.000 8 

9568.000 8 

9580.000 7 

9581.000 7 

9582.000 5 

9583.000 8 

9765.120 39 

9765.125 39 

9791.015 39 

9791.025 39 

9791.035 39 

9791.045 39 

9791.145 39 


71

R 

All in all – solutions from Rittal 

Industrial enclosures 

Small enclosures Compact enclosures Large enclosures 

Products for the human/machine interface Console systems 

Material: sheet steel, stainless steel, aluminium and plastic 

Industrial network technology Input and signalling devices 

Solutions for EMC and Ex Cable glands 

Power distribution 

Electronic packaging 

System climate control 

IT solutions 

Communication systems 

Rittal has one of the largest ranges of enclosures available 

for immediate delivery. However, Rittal also supplies integrated 

solutions – up to Level 4. This comprises mechanical 

installation, power supply, electronic components, climate 

control and central monitoring. 

For all of your requirements. Fully assembled and functional. 

Wherever in the world you develop and implement solutions 

for yourself and your customers, we are close at hand. The 

global alliance between production, distribution and service 

guarantees closeness to the customer. Worldwide! 

11/06 E155 

Rittal GmbH & Co. KG Postfach 1662 D-35726 Herborn 

Telephone: +49(0)2772 505-0 Telefax: +49(0)2772 505-2319 eMail: info@rittal.de www.rittal.com 

Switch to perfection

Rittal â Small Enclosures

Create successful ePaper yourself

Delete template?

Save as template?

Rittal â Small Enclosures