Direct attachment of profile steel and aluminium sheeting to steel ...

Fastener range with irius ® drive system from SFS intec.
Direct attachment of profile steel and
aluminium sheeting to steel and timber.

Carbon steel self drilling fasteners with irius ® -drive system for profiled
sheeting to steel structure
Technical information
SD-L12
Material:
Fastener:
Washer:
Drive system:
Plated carbon steel,
case hardened
T = carbon steel
with vulcanised EPDM
irius ® : underhead drive
Application:
Fastening profile steel sheeting to steel in one operation: drilling, thread forming
and sealing.
irius ®
12
d
Underhead drive
L
DI 600
Especially lightweight
screwgun
Special features:
The newly developed underhead drive on
the SD-L12 self-drilling fastener is virtually
invisible!
This aesthetic SD-L12 fastener head blends
especially harmoniously with the cladding
surface.
Advantages in installation:
– optimum fastener guidance
– no veering to one side by the fastener
– fastener is clamped firmly in the E 420
setting tool
Setting tool E 420
Coloured fasteners:
Durable SFS intec powder
coating can be applied in
any colour
2

Carbon steel self drilling fasteners with irius ® -drive system for single
skin construction to steel structure
Example/Order code
Max. Effective Drive Effective
drilling thread system Washer: Thread Overall thread
capacity length irius ® Material, diameter length length
Type VD (mm) KL (mm) Ø 12 mm Diameter d (mm) L (mm) KL (mm)
SD 3 / 15– L12– T15– 4,8x 38
*Select washer to suit application eg:
T15/T16 for walls, T19 for roofs
A32 for rooflights (Please note effective thread
length is reduced by 2 mm)
System and tool information
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
Carbon steel fasteners
SD3– L12–T15– 4,8x
22 10
VD max.
VD max.
Steel:
VD max.:
t min.:
3,0 mm
2 x 0,63 mm
1,5 mm
SD3/15– L12– T15– 4,8x
38 15
VD max.
VD max.
Steel:
VD max.:
t min.:
3,0 mm
2 x 0,63 mm
1,5 mm
VD max.
SDL3– L12– T15– 5,5x
25 8
VD max.
Steel:
VD max.: 3,0 mm
t min.: 1,2 mm
For internal and
external flashing
Steel:
t min.: 2 x 0,4 mm
to
2 x 1,0 mm
3

Carbon steel self drilling fasteners with irius ® -drive system for single
skin construction to steel structure
Example/Order code
System and tool information
Max. Drive Effective
drilling system Washer: Thread Overall thread
capacity irius ® Material, diameter length length
Type VD (mm) Ø 12 mm Diameter d (mm) L (mm) KL (mm)
SD 3– L12– T15– 5,5x 38
*Select washer to suit application eg:
T15/T16 for walls, T19 for roofs
A32 for rooflights (Please note effective thread
length is reduced by 2 mm)
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
SD3– L12– T15*– 5,5x
SD3– L12– T15*– 5,5x
38 18
59 39
VD max.
Steel:
VD max.: 3,0 mm
t min.: 1,2 mm
SD5– L12– T15– 5,5x
25 12
VD max.
Steel:
VD max.:
t min.:
5,0 mm
2,0 mm
t
SD5– L12– A12–5,5x
25
VD max.
Steel:
VD max.: 5,0 mm
t min.: 2,0 mm
4

Carbon steel self drilling fasteners with irius ® -drive system for single
skin construction to steel structure
Example/Order code
Max. Drive Effective
drilling system Washer: Thread Overall thread
capacity irius ® Material, diameter length length
Type VD (mm) Ø 12 mm Diameter d (mm) L (mm) KL (mm)
SD 8– L12– T15– 5,5x 25
*Select washer to suit application eg:
T15/T16 for walls, T19 for roofs
A32 for rooflights (Please note effective thread
length is reduced by 2 mm)
System and tool information
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
Carbon steel fasteners
SD8– L12– T15– 5,5x
25 8
VD max.
Steel:
VD max.:
t min.:
8,0 mm
2,0 mm
SD14–L12– T15*– 5,5x
34 12
VD max.
Steel:
VD max.:
t min.:
14,0 mm
4,0 mm
5

Carbon steel self drilling stitchers with irius ® -drive system for side laps
and flashings
Technical information
SL2-T-L12
Material:
Fastener:
Washer:
Drill point:
Drive system:
Plated carbon steel,
case hardened
A = Aluminium
case hardened carbon steel with vulcanised EPDM
irius ® : underhead drive
Application:
Side lap stitching to steel sheets and flashings. The thread-free zone under the fastener
head prevents the threads stripping in the sheets. Sheets are pulled
together tightly, clamped in the thread-free zone and sealed through the sealing
washer.
irius ®
Underhead drive
Example/Order code
System and tool information
Max. Drive Steel
drilling Material: system Washer: Thread Overall sheet
capacity carbon irius ® Material, diameter length thickness
Type VD (mm) steel Ø 12 mm Diameter d (mm) L (mm) t (mm)
SL 2– T– L12– A10– 4,8x 20
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
SL2–T–L12– A14–4,8x
20 2x0,4
2x1,0
VD max.:
2 x 0,4 mm
to
2 x 1,0 mm
6

7
Carbon steel fasteners

Austenitic stainless steel self drilling fasteners with irius ® -drive system
for steel and aluminium structure
Technical information
SX-L12
Material:
Fastener: Austenitic stainless steel, grade 304
Washer: S = Stainless steel, grade 304
A = Aluminium
with vulcanised EPDM
Drill point: Case hardened, carbon steel
Application:
Stainless steel fastening of steel or aluminium sheet to steel or aluminium structure
in one operation: drilling, thread forming and sealing.
irius ®
d
12
Underhead drive
L
DI 600
Especially lightweight
screwgun
Special features:
The newly developed underhead drive on
the SX-L12 self-drilling fastener is virtually
invisible!
This aesthetic SX-L12 fastener head blends
especially harmoniously with the cladding
surface.
Advantages in installation:
– optimum fastener guidance
– no veering to one side by the fastener
– fastener is clamped firmly in the E 420
setting tool
Setting tool E 420
Coloured fasteners:
Durable SFS intec powder
coating can be applied in
any colour
8

Austenitic stainless steel self drilling fasteners with irius ® -drive system
for internal twin skin construction to steel structure
Example/Order code
System and tool information
Max. Effective Drive Effective
drilling thread system Washer: Thread Overall thread
capacity length irius ® Material, diameter length length
Type VD (mm) KL (mm) Ø 12 mm Diameter d (mm) L (mm) KL (mm)
SX 3 / 4– L12– S16– 5,5x 22
*Select washer to suit application eg:
S16 for walls, S19 for roofs
A32 for rooflights (Please note effective thread
length is reduced by 2 mm)
Min.-Max.
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
VD max.
SX3/4– L12– S16*–5,5x
22 4
VD max.
SX3/10– L12– S16*– 5,5x
SX3/15– L12– S16*– 5,5x
28 10
38 15
KL max.
VD max.: 3,0 mm
t min. steel: 2 x 0,63 mm
1,2 mm
t min. alu: 2,0 mm
VD max.:
t min.:
t min. alu:
3,0 mm
1,2 mm
2,0 mm
Stainless steel fasteners
SX3/20–34–L12–S16–5,5x52 20–34
t
SX3/ 4– L12– A12– 5,5x
SX3/10– L12– A12– 5,5x
22 4
28 10
VD max.
Steel:
VD max.: 3,0 mm
t min.: 2 x 0,63 mm
1,5 mm
Alu:
VD max.: 3,0 mm
t min.: 2,0 mm
9

Austenitic stainless steel self drilling fasteners with irius ® -drive system
for single skin construction to steel structure
Example/Order code
System and tool information
Max. Effective Drive Effective
drilling thread system Washer: Thread Overall thread
capacity length irius ® Material, diameter length length
Type VD (mm) KL (mm) Ø 12 mm Diameter d (mm) L (mm) KL (mm)
SX 6 / 6– L12– S16*–5,5x 26
*Select washer to suit application eg:
S16 for walls, S19 for roofs
A32 for rooflights (Please note effective thread
length is reduced by 2 mm)
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
VD max.
SX6/6– L12– S16*– 5,5x
26 6
VD max.
VD max.:
6,0 mm
t min. steel: 2,0 mm
t min. alu: 3,0 mm
VD max.
SX6/12– L12– S16*– 5,5x
SX6/15– L12– S16*– 5,5x
32 12
38 15
VD max.:
6,0 mm
t min. steel: 2,0 mm
t min. alu: 3,0 mm
VD max.
SX6/ 6– L12– A12– 5,5x
SX6/12– L12– A12– 5,5x
SX6/15– L12– A12– 5,5x
26 6
32 12
38 15
VD max.:
6,0 mm
t min. steel: 2,0 mm
t min. alu: 3,0 mm
10

Austenitic stainless steel self drilling fasteners with irius ® -drive system
for single skin construction to steel structure
Example/Order code
System and tool information
Max. Effective Drive Effective
drilling thread system Washer: Thread Overall thread
capacity length irius ® Material, diameter length length
Type VD (mm) KL (mm) Ø 12 mm Diameter d (mm) L (mm) KL (mm)
SX 14 / 12– L12– S16*–5,5x 38 12
*Select washer to suit application eg:
S16 for walls, S19 for roofs
A32 for rooflights (Please note effective thread
length is reduced by 2 mm)
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
VD max.
SX14/12– L12– S16*– 5,5x
SX14/20– L12– S16*– 5,5x
38 12
44 20
VD max.: 14,0 mm
t min. steel: 4,0 mm
SX14/38– L12– S16*–5,5x
/58–
/75–
61 6-38
81 26-58
98 44-75
VD max.
VD max.:
t min. steel:
14,0 mm
4,0 mm
Stainless steel fasteners
11

Austenitic stainless steel self drilling fasteners with irius ® -drive system
for single skin construction to timber structure
Technical information
SXW– L12
Material:
Fastener: Austenitic stainless steel, grade 304
Washer: S = Stainless steel, grade 304
with vulcanised EPDM
Drive system: irius ® : underhead drive
Application:
Stainless steel fastening of steel or aluminium sheets to
timber structure.
irius ® Underhead drive
d
12
L
DI 600
Especially lightweight
screwgun
Special features:
The newly developed underhead drive on
the SX-L12 self-drilling fastener is virtually
invisible!
This aesthetic SX-L12 fastener head blends
especially harmoniously with the cladding
surface.
Advantages in installation:
– optimum fastener guidance
– no veering to one side by the fastener
– fastener is clamped firmly in the E 420
setting tool
Setting tool E 420
Coloured fasteners:
Durable SFS intec powder
coating can be applied in
any colour
12

Austenitic stainless steel self drilling fasteners with irius ® -drive system
for single skin construction to timber structure
Example/Order code
System and tool information
Drive
system Washer: Thread Overall
irius ® Material, diameter length
Type Ø 12 mm Diameter d (mm) L (mm)
SXW– L12– S16*– 6,5x 50
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
*Alternative washer:
Ø S19
VD max.
SXW– L12– S16*–6,5x
50
74
VD: 1 x 0,5 mm
to
2 x 1,0 mm
VD max.
SXW– L12– S16*–5,5x
40
VD max.
VD: 1 x 0,5 mm
to
2 x 1,0 mm
Stainless steel fasteners
13
13

Austenitic stainless steel and aluminium stitching fasteners with
irius ® -drive system
Technical information
SXL– L12
Material:
Fastener: Austenitic stainless steel, grade 304
Washer: S = Stainless steel, grade 304
with vulcanised EPDM
Drive system: irius ® : Underhead drive
Application:
Stainless steel fastening of side laps and flashings. The thread-free zone under
the fastener head prevents stripping of the threads in the sheets. The sheets are
pulled together tightly, clamped in the thread-free zone and sealed.
irius ®
d
12
Underhead drive
L
Example/Order code
System and tool information
Max. Drive Effective
drilling system Washer: Thread Overall thread
capacity irius Material, diameter length length
Type VD (mm) Ø 12 mm Diameter d (mm) L (mm) KL (mm)
SXL 2– L12– S16*– 5,5x 22
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
VD max.
SXL2– L12– S14– 5,5x
22 2x0,4
to
2x1,0
VD max.: 2 x 1,0 mm
SXL2– L12– S16–6,3x
25 2x0,4
to
2x1,0
14

Austenitic stainless steel repair fasteners with irius ® -drive system
Example/Order code
Drive
Material: system Washer: Thread Overall
stainless irius ® Material, diameter length
Type steel Ø 12 mm Diameter d (mm) L (mm)
TDC– S– L12– S19– 7,1x 19
System and tool information
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
Applications
TDC–S– L12– S16– 7,1x
19
– Over-torqued fastening in purlin:
The Ø 7,1x19 repair fastener can be used
to repair overdriven fasteners in purlins.
However, in that case the existing hole has to
be enlarged to Ø 6,55. Only suitable for steel
purlin up to 3 mm.
– Over-tourqued fastening in side lap
applications
1. Take out over torqued fastener
2. Insert TDC-S-S19-7,1x19 fastener in the same
hole
3. Tighten and seal
(carefully tighten using engineers hand brace)
Stainless steel fasteners
15

Carbon steel and austenitic stainless steel self drilling fasteners
with irius ® -drive system for composite panels to steel structure
Technical information
SDT–L12 / SXC–L12
Material:
Fastener:
SDT: Carbon steel, case hardened
SXC: Austenitic stainless steel, grade 304
(European Standard 1.4301)
Grade 316 (European Standard 1.4401)*
Washer: S = Stainless steel, grade 304 or 316
A = Aluminium
with vulcanised EPDM
Drive system:
irius ® : underhead drive
Application:
Fastening composite panels to steel or timber structure. The unique thread free
zone underneath the head and stress rings on the shank of the heavy section
fastener all ensures a long term problem free fastening.
irius ®
SDT
d 7
d 5,5
12
L
irius ®
SXC
d 7
d
12
L
DI 600
Especially lightweight
screwgun
Special features:
The newly developed underhead drive
on the SDT–L12 and SXC–L12 self-drilling
fastener is virtually invisible!
This aesthetic fastener head blends especially
harmoniously with the cladding surface.
Advantages in installation:
– optimum fastener guidance
– no veering to one side by the fastener
– fastener is clamped firmly in the E 420
setting tool
Setting tool E 420
Coloured fasteners:
Durable SFS intec powder
coating can be applied in
any colour
16

Carbon steel self drilling fasteners with irius ® -drive system
for composite panels to steel structure
Example/Order code
System and tool information
Max.
Drive
drilling system Washer: Thread Overall Panel
capacity irius ® Material, diameter length thickness
Type VD (mm) Ø 12 mm Diameter d (mm) L (mm) D (mm)
SDT 5– L12– A19– 5,5x 55
Coloured
fasteners
Setting tool
DI 600
D
t min.
1,5 mm
SDT5– L12– A19– 5,5x
67 31– 45
77 39– 55
97 49– 75
112 54– 90
137 69–115
VD max:
5,0 mm
D
t min.
4,0 mm
SDT14– L12– A19– 5,5x
74 38– 48
93 48– 67
113 68– 87
132 87–106
VD max.
14 mm
17
Fasteners for composite panels

Austenitic stainless steel self drilling fasteners with irius ® -drive system
for composite panels to steel structure
Example/Order code
System and tool information
Max.
Drive
drilling system Washer: Thread Overall Panel
capacity irius ® Material, diameter length thickness
Type VD (mm) Ø 12 mm Diameter d (mm) L (mm) D (mm)
SXC 14 / L12– S19*–5,5x 67
*Select washer to suit application eg:
S16 for walls, S19 for roofs
A32 for rooflights (Please note effective thread
length is reduced by 2 mm)
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
D
SXC14– L12– S19*–5,5x
67* 27– 38
76* 37– 48
95* 48– 76
114* 67– 86
134* 86–106
162* 105–134
VD max.:
14,0 mm
t min.:
4,0 mm
*available on request
18

Austenitic stainless steel self drilling fasteners with irius ® -drive system
for composite panels to timber structure
Technical information
SXCW– L12
Material:
Fastener: Austenitic stainless steel, grade 304
Washer: S = Stainless steel, grade 304
with vulcanised EPDM
Drive system: irius ® : underhead drive
Application:
Stainless steel fastening of composite panels
to timber structure.
irius ®
d
12
Underhead drive
L
Example/Order code
System and tool information
Drive
system Washer: Thread Overall Panel
irius ® Material, diameter length thickness
Type Ø 12 mm Diameter d (mm) L (mm) D (mm)
SXCW– L12– S16*– 6,5x 50
Accessories:
Setting tool E 420
Depth locator Z 661
Setting tools
and accessories
Chapter 13
DI 600
*Alternative washer:
Ø S19
SXCW– L12– S19– 6,5x 90* 28– 37
105* 38– 55
115* 48– 65
135* 68– 85
155* 78–105
185* 100–135
*available on request
D
VD max.: 2,0 mm
19
Fasteners for composite panels

Installation tools and accessories
Couloured fasteners
Setting tool E 420
DI 600 Screw gun
The E420 setting tool is required
for installing self-drilling fasteners
with the irius system.
For installing fasteners efficiently and
reliably. The lightweight tool facilitates
fatigue-free installation. Its high
performance and practical depth stop
are ideal for direct fastening.
The options created by the new
fasteners for using colour in cladding
design are almost unlimited. The
colour of the fastener head can be
coordinated precisely with the
roofing and cladding.
High-quality SFS intec powder coating,
already used successfully on millions
of fasteners.
High-quality attachment starts at the planning stage
SFS intec has set up an advisory
service to enable planners, architects
and contractors to make a fast, ideal
choice of fasteners from the wide
range availabe.
Play it safe and take advantage of
our many years of experience in the
field of mechanical fastening.
© SFS intec 2003 Technical changes reserved
RC 10.00.03 E Produced in Switzerland
Advice and sales
SFS intec Inc., FasteningSystems
US-Wyomissing, PA 19610 Phone (1) 610 376 5751
Spring St. & Van Reed Rd. Fax (1) 610 376 8551
P.O. Box 6326
www.constructionfasteners.com