The new PFERD hoof plane:

NEW
The new PFERD hoof plane:
Extremely effective and cost-efficient
■ Fast results due to outstanding cutting performance.
■ Creates uniformly smooth hoof surfaces.
■ Minimizes physical effort and back strain during use.
1

The new PFERD hoof plane:
Extremely effective and cost-efficient
Hoof rasps have been manufactured since the
late 18th century and were among the first
PFERD tools.
Order No. Length
[mm]
2
Hoof plane
Unlike conventional products, this hoof plane
does not have rasp cut or cross cut faces but
possesses milled teeth on both sides (one fine,
one coarse side).
It can be used for planing the hoof surface,
trimming the hoof wall and filing the toe.
Thanks to the high material quality employed,
With this new hoof plane, PFERD presents
an innovative, extremely effective and costefficient
product for smoothing and shaping
horse hooves.
even hoof nails can be dressed with this
tool after shoeing – neither the nails nor the
steel of the horseshoe will cause its teeth to
become blunt.
Supplied as a rectangular file with tang, teeth
on all four sides.
Length
[Inch]
Cut EAN
4007220
Recommendation for use:
The PFERD hoof plane can be fitted with standard
file handles of the appropriate size.
Cross-section
[mm]
3515 350 14 milled 809631 44,0 x 6,0 5 2.600
Long hoof chips obtained with coarse side cut. Trimming and cleaning hooves.
Filing hoof nails after shoeing. Dressing the hoof wall and toe.
Its outstanding cutting performance ensures
fast results while minimizing physical effort
and back strain during use. At the same time,
rapid stock removal and a high-grade surface
finish are guaranteed.
819 142 10/2009 Technical Changes Reserved.
Printed in Germany.