Headers - OPGI.com

opgi.com

Headers - OPGI.com

Largest Inventory Anywhere

We've Expanded (Again) Into A

New 2-Acre Facility To Better Serve You!

The first home of the Original Parts Group was located in Anaheim, California

and was approximately 1200 square feet. That was over 19 years ago and since

then we have moved six times, always going to larger and larger facilities to

expand our product line and improve our customer service. Our newest facility

is located on over 2 acres (90,000 square feet), making it the largest operation

in the United States devoted exclusively to GM A-body parts and accessories.

There is over 50,000 square feet under roof, with a further 4,000 square feet

under construction. We are located on Bolsa Ave., a main thoroughfare in

Huntington Beach, California, directly across the street from the southern

California headquarters facility of the Boeing Corporation. With the operational

capabilities we have in this enormous new building, we are able to pull, pack,

and fill orders for shipping with unparalleled accuracy and speed. We would like

to thank you, our loyal customers, for this explosive growth and support through

the years. Be assured that we will continue to uphold Original Parts Group's

company mission: To offer the finest reproduction and aftermarket parts and

accessories for GM A-bodies at the very best prices anywhere. So, we would

like to say…. Thank you very much for shopping at Original Parts Group.

BUY DIRECT!

We manufacture our own

Injection molded plastic/interior trim

Die Cast Moldings and Chrome Trim

Roll Formed Steel and Aluminum Parts

Die Cut Gaskets and Molded Rubber

Abbreviations Used

In This Catalog

AT/AUTO = Automatic transmission

BCKT = Bucket seat

BB = Big-block engine

CI = Cubic inches

CPE = Coupe or hardtop without pillar posts

CONV = Convertible

CYL = Cylinder (6 or 8)

DR = Door (as in 2- or 4-doors)

HP = High-performance

OM = Original Equipment Manufacturer

(usually General Motors)

PG = Powerglide

PS = Power steering

REPRO = Aftermarket reproduction designed

to original GM part specification

RR = Rear

SB = Small-block engine

STD = Standard ( non-SS or non-high performance)

TH = Turbo Hydramatic shift transmissions

4-SPD = 4-speed transmission

Left (or LH) = Driver side of vehicle

Right (or RH) = Passenger side of vehicle

Order By Phone

CALL TOLL FREE

Call Toll Free to place your order at OPG.

Simply call 1-800-243-8355. For local or

international orders, please call (714) 230-6000.

Order By FAX

FAX 24 HOURS A DAY

You can FAX your order to us 24 hours a day,

7 days a week and always get the fast service

you’ve come to expect at (714) 230-6050.

Order By Mail

Simply fill in the order form(s) in the back of this

catalog: enclose your payment of money order,

certified check, cashier’s check or credit card,

and place it in the mail. We also accept personal

checks, but the order must be held for 20 days

pending check clearance. Minimum mail order

purchase is $20.00.

Minimum Order

When ordering by mail and paying by check, we

require a $20 minimum order. Credit card orders

also require a minimum of $20. If you're purchasing

parts in person at OPG, no minimum is required.

SHOWROOM HOURS:

Monday through Friday 8:00AM to 5:00PM

Saturday 10:00AM to 3:00PM

We're closed on Sunday and Major U.S. Holidays


Quality Reproductions

At Original Parts Group, we pride ourselves on offering only the highest

quality restoration parts and accessories. Our full-time research department

ensures that all of our parts meet or exceed original factory specifications

for quality and durability. Our company philosophy enables us to offer a

"100% SATISFACTION GUARANTEE" policy on all parts.

Telephone Sales &

Customer Service Hours

Order desk hours are (Pacific Daylight Time) 7:30AM to 5:00PM Monday

through Friday, and on Saturday from 10:00AM to 3:00PM. Our showroom

opens daily at 8:00AM and on Saturday at 10:00AM.

We’re closed on Sunday and major U.S. Holidays. FAX 24 HOURS A DAY

You can FAX your order to us 24 hours a day, 7 days a week and always get the

fast service you’ve come to expect at (714) 230-6050

Methods Of Payment

All major credit cards, money orders, and cashier’s checks are accepted.

We also accept any first party, preprinted personal checks. U.S Funds only,

please. C.O.D. (Cash On Delivery) orders are also accepted to anywhere

in the continental U.S.

Customer Service Representatives

Original Parts Group’s customer service representatives are available to

answer all your restoration questions and to take orders for merchandise

six days a week. Please have your customer number ready (on your catalog

above your name) when you call in. Find out how many frequent buyer points

you have, what they’re worth, and if you have any credit to use. You can

easily check on whether your parts and accessories were shipped, the date

they were shipped, and an estimate of the date of delivery to your door.

Shop

online 24/7 at ...

GMRESTOPARTS.COM

Our website

makes it easy!

Call Toll Free:

1-800-243-8355

Includes Alaska, Hawaii and Puerto Rico

Our phone sales representatives are available to answer your

questions regarding restoration and to take orders for merchandise

six days a week. We accept VISA, MASTERCARD, AMERICAN

EXPRESS, and DISCOVER. You may also arrange to have orders

shipped C.O.D. (See “CASH ON DELIVERY” on the Ordering and

Shipping page for details.) International Customers Please Dial

(714) 230-6000.

FAX Number:

1-714-230-6050

Original Parts Group offers a convenient FAX line for customers

who have access to a FAX machine. Our FAX machine is available

24 hours a day, 7 days a week.

By Mail

5252 Bolsa Avenue, Huntington Beach, CA 92649

Simply fill in the order form(s) provided in the back of this catalog.

Money orders, certified checks and charge cards are accepted.

We recommend that you FAX your order blanks for faster service

when using a credit card, however all mail orders are processed

the same day that they are received.

Order Through

The Internet

Http://www.gmrestoparts.com

or www.originalpartsgroup.com

Check out our world wide web site and virtual catalog.

Order parts and accessories 24 hours a day on our secure

server that utilizes the latest encryption technology.

*See our Ordering and Shipping Information page in the back of this catalog for

shipping information, merchandise return policy, and important additional

Original Parts Group policies.


VOLUME

DISCOUNTS!

VOLUME

DISCOUNTS!

ARE YOU PLANNING A

MAJOR RESTORATION?

We have the largest selection and the best prices...

Why not go one step further and save an additional

5 or 10% on selected items? You can get it all here

and take advantage of the best service and selection

available anywhere!

If your order is over $1000.00 and you pre-pay

with a MONEY ORDER or CASHIER’S CHECK,

you will receive a 10% DISCOUNT PLUS FREE

FREIGHT. Order must exceed $1000.00 after

discount is applied.

If your order is over $1000.00 and you pre-pay

with a CREDIT CARD you will receive a 5%

DISCOUNT PLUS FREE FREIGHT. Order must

exceed $1000.00 after discount is applied.

If your order is over $500.00 and you pre-pay

with a MONEY ORDER or CASHIER’S Check,

you will receive a 5% DISCOUNT. Order must

exceed $500.00 after discount is applied.

IMPORTANT DISCOUNT QUALIFICATIONS:

To qualify for discount you must absolutely order all

parts at one time (no exceptions). Sorry, personal

checks do not qualify for discount (certified funds only).

C.O.D. orders are not eligible for discounts either.

Special Note:

Volume Discount pricing cannot be used in conjunction

with any other special promotions, sales, or discounts!

TRUCK FREIGHT AND OVERSIZED FedEx GROUND

ITEMS NOT FREIGHT FREE.

General Information

Credit Cards

You may place your order using VISA, MASTERCARD,

AMERICAN EXPRESS, or DISCOVER. When placing

your credit card order, be sure to include your name as

it appears on the card, the entire card number, the

date of expiration, and the security code located on the

back of VISA, MasterCard, Discover and the front of

American Express. IMPORTANT: We must be able to

verify the shipping address as the credit card holder’s.

Minimum credit card purchase is $20.00.

Money Orders & Cashier’s Check

Money orders, cashier’s check and certified checks are

accepted. On pre-paid mail orders, this is the fastest

method of insuring that your order is processed as

quickly as possible, usually within 24 hours.

Personal Checks

To use a personal check or business check on pre-paid

orders, the name, address, and check number must be

pre-printed on the check. Only first party checks will be

accepted. All orders paid by personal check are held 20

business days pending check clearance. If you are

mailing your order and need the parts in a hurry, we

recommend sending a money order, cashier’s check,

or paying by any of the major credit cards that we accept.

Prices

The prices in this catalog were in effect at the time of printing, and

supersede all prices in any previous OPG publication. OPG reserves

the right to change prices without notice. Availability of all parts and

accessories in this catalog subject to change without notice. OPG

reserves the right to discontinue products, services, and accessories

without notice.

Back Orders

Many items in our giant inventory move quickly, and rarely are we out

of stock on any items for any length of time. Over 90% of all items that

are out of stock at the time you place your original order are in within

5 days. We maintain a sophisticated back order tracking system in our

computer that automatically ships any items due to you when they become

available. Normally, back orders take as little as 5 days to receive, but can

take as much as 30 days. For an estimated time of arrival, call our

customer service department at 1-800-243-8355.

Sales Tax Information

Orders outside California are exempt from California State Sales Tax at

the time of this printing. California residents are required to add sales tax.

Due to the periodic unforeseen changes in the California Sales Tax and

Federal Interstate Tax System, rates are subject to change. The current

California State Sales Tax at the time of this printing is 7-3/4 %.

*See our Ordering and Shipping Information page in the back of this catalog for shipping information, merchandise return policy, and important additional Original Parts Group policies.


Icon References

Reproductions Manufactured in-house

by Original Parts Group.

Your satisfaction 100% Guaranteed!

We have added hundreds of new products for 2003.

From interior products to quality steel reproductions and

everything in between! Throughout the catalog there is

something new for everyone!

There are hundreds of products throughout

this catalog that are either special purchases from the

manufacturer, overstocked in our warehouse, or loss

leaders. Whatever the reason, our sale merchandise is

still the best you can get at rock bottom pricing!

Our made in the USA icon speaks for itself...

American-manufactured products, of course!

In this catalog, the GM Restoration Parts Emblem

indicates that a product is officially licensed to

Original Parts Group by General Motors.

All merchandise in this catalog having a trademark or related logo of General

Motors is licensed as necessary pursuant to copyright and trademark laws

under agreements between Original Parts Group’s supplier and General Motors.

Guide, Chevelle, El Camino and the GM RESTORATION PARTS emblems

are trademarks of General Motors Corporation and are used under license to

Original parts Group Incorporated.

Come In And Visit

Our Brand New

SHOWROOM

Table Of Contents

Interior and soft trim................. 4-71

Weatherstripping.................... 72-76

Emblems and nameplates........ 77-78

Body moldings and trim.......... 79-82

Lamp, lenses and accessories

............................................... 83-85

Door handles, hinges, and

accessories............................... 87-90

Hoods and accessories............ 91-93

Steel and fiberglass body

parts......................................... 94-103

Bumper pads and jacks................. 104

Engine and body decals...... 105-108

Suspension and Components

...........................................

Steering and brakes...........

Fuel and carburetor............

Transmission and clutch...........

Batteries and accessories....

Ignition, wiring, and electrical

........................................... 187-203

Nitrous systems and components

........................................... 204-211

Engine, components, and

accessories........................ 212-291

Cooling and air conditioning

...........................................

Exhaust components.........

Washer/wipers...................

Wheels and tires................

Tools and welding supplies

...........................................

Bolts, clips, and fasteners.....

Keys, lock sets....................

109-125

126-137

138-168

169-182

183-186

292-302

303-312

313-314

315-325

326-345

346-349

350-351

Car covers and masks............... 352

Wash/wax supplies............. 353-358

Paint and rust treatment..... 359-367

License plates, gifts, apparel

........................................... 368-402

Videos and literature........... 403-422

Order Blanks & Shipping Policy in Back of Catalog


Exhaust Systems

Complete High-Performance Exhaust Kits

STARTING AT

$259.95

This high-performance exhaust system is constructed of 2-1/2" aluminized mandrel bent tubing and fully welded H-pipe. Complete with all hardware

(hangers and clamps) necessary. The American Thunder complete kit includes all the above including 30-Series Flowmaster Mufflers. Fits 1964-72 Chevelle.

17107 70-72 (without mufflers)....................................................................................................................................................................... KIT 259.95

171070 70-72 (with mufflers)............................................................................................................................................................................ KIT 359.95

17119 70-72 (with mufflers)............................................................................................................................................................................ KIT 339.95

CH21992 70-72 reducer 3", 2-1/2" tailpipe.......................................................................................................................................................... pair 27.95

NOTE: This item is OVERSIZED and requires an additional freight charge of $25.90. NOTE 2: Welding required for installation.

1970-72 High-Performance Tailpipes

$149.95

Original equipment replacement 2-1/2" tailpipes. Fits in original position over rear axle. High-quality, double-walled steel tubing. Get that great musclecar sound

with FLOWMASTER mufflers and tailpipes.

C26713 70-72 .................................................................................................................................................................................................. pair 149.95

NOTE: This item is OVERSIZED and requires an additional freight charge of $14.95 each.

303


Exhaust Accessories

Hooker Aero Chamber Mufflers

Flowmaster High-Performance

Mufflers

$59.95

The Aero Chamber Muffler is designed for a throaty powerful sound and flows

23% better to produce more horsepower and torque with it’s aerodynamic

design. Made of 16-gauge aluminized steel with a stainless steel perforated

plate to eliminate internal rust.

CH24905 2-1/2" in/out....................................................... each 59.95

Sweet Thunder Chambered

Mufflers

$94.95

Gain 10 to 15 horsepower to the rear wheels by adding these high-performance

mufflers. Manufactured in the USA using the highest-quality materials and the

latest technology, the standard in high-performance exhaust. These extreme

high-flow mufflers will give your vehicle that powerful musclecar sound that

you are looking for.

42553HP 70-77 2-1/2" inlet/outlet (3 chamber)................... each 94.95

Edelbrock High-Performance

Mufflers

STARTING AT

$64.95

These general-use chambered mufflers come in three standard lengths for

virtually any A-body application: 18", 24" and 30". The custom-designed inner

baffles are tuned for optimum air flow and that awesome musclecar rumble!

Andremember, Sweet Thunder Mufflers are available in aluminum or 304

StainlessSteel. Your total satisfaction guaranteed. The Custom version are

the samemufflers, but with a more mellow sound.

CH24803 aluminized - 18" x 2.5"....................................... each 69.95

CH24804 aluminized - 18" x 3".......................................... each 69.95

CH24805 aluminized - 24" x 2.5"....................................... each 84.95

CH24806 aluminized - 24" x 3".......................................... each 84.95

CH24807 aluminized - 30" x 2.5"....................................... each 99.95

CH24808 aluminized - 30" x 3".......................................... each 99.95

CH24809 stainless - 18" x 2.5".......................................... each 89.95

CH24810 stainless - 18" x 3"............................................. each 89.95

CH24811 stainless - 24" x 2.5".......................................... each 109.95

CH24812 stainless - 24" x 3"............................................. each 109.95

CH24813 stainless - 30" x 2.5".......................................... each 129.95

CH24814 stainless - 30" x 3"............................................. each 129.95

CH24971 aluminized - 18" x 2.5" (custom)........................ each 64.95

CH24972 aluminized - 24" x 2.5" (custom)........................ each 84.95

CH24973 aluminized - 30" x 2.5" (custom)........................ each 99.95

CH24974 stainless - 18" x 2.5" (custom)........................... each 89.95

CH24975 stainless - 24" x 2.5" (custom)........................... each 109.95

CH24976 stainless - 30" x 2.5" (custom)........................... each 129.95

NOTE: Includes a 3-year warranty from the manufacturer.

$108.95

Edelbrock RPM series mufflers feature an extremely durable 409 stainless

steel case that resists rust and corrosion. The stainless steel inner core

features durable ceramic packing that withstands temperatures of over 1800

degrees. The unique Tru-Flo design improves exhaust flow, giving your vehicle

more torque, horsepower and a better sound.

CH20409 70-77 2-1/2" inlet/outlet (Edel. # 5544)................ each 108.95

304


Headers

Hooker "Super Competition "

Headers

Hooker "Competition " Headers

STARTING AT

$359.95

Horsepower is everybody’s main objective, so go with the best header on the

market to achieve that goal. Hooker Super Competition headers are made to

perform on specific engines improving engine efficiency, maximizing

horsepower, and in most cases improving mileage. Super Competition headers

are made of the lightest material possible, with maximum strength and coated

with high heat-resistant black paint or metallic ceramic thermal barrier

coating, your choice!

C980160- 70-77 (265-400) Will not fit angle plug heads

1-5/8" x 31" with a 3" collector

Gasket: C980180 Reducer: C980183

C980162- 70-75 (265-400) Will fit angle plug heads, No AC

1-3/4" x 31" with a 3" collector

Gasket: C980180 Reducer: C980183

C980164- 70-74 (396-454) Will not work with Powerglide, Big-

Block frame stands and motor mounts

must be used to insure proper engine

location and header fit.

1-3/4" x 30" with a 3" collector

Gasket: C980181 Reducer: C980183

C980170- 70-74 (396-454) Big-block frame stands and motor

mounts must be used to insure

proper engine location and header fit

1-7/8" x 35" with a 3-1/2" collector

Gasket: C980181 Reducer: C980184

C980172- 72-74 (396-454) Big-block frame stands and motor

mounts must be used to insure

proper engine location and header fit

2" x 35" with a 3-1/2" collector

Gasket: C980181 Reducer: C980184

C980175- 70-72 (396-454) One tube over each side of frame,

No AC, Round exhaust port in head

2-1/8" x 36" with a 3-1/2" collector

Gasket: C980182 Reducer: C980184

C980160 black (Hooker # 2124).......................................... pair 359.95

C980161 ceramic coated (Hooker # 2124-1)....................... pair 599.95

C980162 black (Hooker # 2116).......................................... pair 359.95

C980163 ceramic coated (Hooker # 2116-1)....................... pair 579.95

C980164 black (Hooker # 2118).......................................... pair 377.95

C980165 ceramic coated (Hooker # 2118-1)....................... pair 597.95

C980170 black (Hooker # 2250).......................................... pair 420.95

C980171 ceramic coated (Hooker # 2250-1)....................... pair 640.95

C980172 black (Hooker # 2217).......................................... pair 420.95

C980173 ceramic coated (Hooker # 2217-1)....................... pair 640.95

C980174 black (Hooker # 2265).......................................... pair 429.95

C980175 ceramic coated (Hooker # 2265-1)....................... pair 649.95

C980180 gasket (Hooker # 10808)...................................... pair 9.95

C980181 gasket (Hooker # 10809)...................................... pair 9.95

C980182 gasket (Hooker # 10810)...................................... pair 9.95

C980183 reducer 3" to 2-1/2" (Hooker # 11030).................. pair 27.95

C980184 reducer 3-1/2" to 2-1/2" (Hooker # 11035)............ pair 27.95

STARTING AT

$149.95

Headers can be an expensive investment, so if you’re looking for something a

little more affordable, Hooker has made the Competition header to fit your

needs as well as your pocketbook. Competition headers are made for the stock

or mildly modified engine. Made of 16-gauge material, they’re approximately

30% heavier than the Super Competition headers, but weld easier and are

slightly more durable. Available in high heat-resistant black paint or metallic

ceramic thermal barrier coating.

C980176- 64-77 (265-400) Will not work on angle plug heads

1-5/8" x 30" with a 3" collector

Gasket: C980180 Reducer: C980183

C980178- 64-74 (396-454) 2" x 30" with a 3-1/2" collector

Gasket: C980181 Reducer: C980184

C980176 black (Hooker # 2451)............................................ pair 149.95

C980177 ceramic coated (Hooker # 2451-1)......................... pair 334.95

C980178 black (Hooker # 2455)............................................ pair 149.95

C980179 ceramic coated (Hooker # 2455-1)......................... pair 349.95

C980180 gasket (Hooker # 10808)........................................ pair 9.95

C980181 gasket (Hooker # 10809)........................................ pair 9.95

C980183 reducer (Hooker # 11030)...................................... pair 27.95

C980184 reducer (Hooker # 11035)...................................... pair 27.95

Shop "Original Parts" & save.

Compare our discount pricing to others in the Chevelle

restoration business ... We have consistently offered the

best pricing on the finest merchandise for over 18 years.

305


Headers

Hedman Headers

CH25657

CH25672

STARTING AT

$149.95

Hedman is a name that is known for quality and performance at a fair price. Bolting on a set of these headers will improve both performance and engine

efficiency. They are available in two different styles, full-length and shortie (provides maximum ground clearance), and three different versions of each;

standard painted versions, ceramic-coated HTC for long-lasting looks and performance, and the Elite series headers with 3/8"-thick flanges, 14-gauge steel

primary tubes, and HTC ceramic coating. They fit small- and big-block Chevelles with the shortie version for automatic transmissions only and the full-length

fits both manual and automatic transmissions. Footnotes:

1. Without smog injection or injection heads

6. Modifications to stock exhaust required to retain catalytic convertor.

15. Shortie-style header (maximum ground clearance).

20. Not recommended for use with aluminum heads.

45. Not legal for sale or use in California on pollution-controlled motor vehicles.

49. Will not fit Saginaw 825 close ratio power steering box.

103. Will fit angle plug heads. (Chevy aluminum only)

121. Must modify radial AC compressor bracket.

208. Gen VI 502 engines with aluminum heads will have clearance problems around spark plugs, plug wires, starters and frames on some applications.

CH25669 70-77 283-400 (black) full length (1,6,45,49,103) (Hedman # 68290).............................................................................................. pair 159.95

CH25670 70-77 283-400 (coated) full length (1,6,45,49,103) (Hedman # 68296)............................................................................................ pair 349.95

CH25671 70-77 283-400 (elite) full length (1,6,45,49,103) (Hedman # 68298)................................................................................................ pair 269.95

CH25672 70-77 396-502 (black) full length (1,6,20,45,49,208) (Hedman # 68190)......................................................................................... pair 149.95

CH25673 70-77 396-502 (coated) full length (1,6,20,45,49,208) (Hedman # 68196)....................................................................................... pair 349.95

CH25674 70-77 396-502 (elite) full length (1,6,20,45,49,208) (Hedman # 68198)........................................................................................... pair 289.95

CH25655 70-77 283-400 (black) shorty (1,6,15,45,49,103,121) (Hedman # 68600)........................................................................................ pair 159.95

CH25656 70-77 283-400 (coated) shorty (1,6,15,45,49,103,121) (Hedman # 68606)..................................................................................... pair 349.95

CH25657 70-77 283-400 (elite) shorty (1,6,15,45,49,103,121) (Hedman # 68608).......................................................................................... pair 269.95

CH25658 70-77 396-502 (black) shorty (1,6,15,20,45,49,208) (Hedman # 68610).......................................................................................... pair 159.95

CH25659 70-77 396-502 (coated) shorty (1,6,15,20,45,49,208) (Hedman # 68610-6).................................................................................... pair 349.95

CH25660 70-77 396-502 (elite) shorty (1,6,15,20,45,49,208) (Hedman # 68618)........................................................................................... pair 269.95

NOTE: HTC is a show quality header that is made from standard gauge steel. The Elite coated header is a performance oriented header built specifically for extremely "hard use" conditions.

306


Headers

headers

Doug's Headers

Doug's Header

Notes:

1.) Will fit factory Bow Tie

angle plug heads.

3.) Stick or automatic.

5.) Four-tube design

9.) Automatic only.

10.) Stock or Dart cast

iron heads.

26.) Rear exit.

31.) Will not fit column shift.

32.) Console shift only.

35.) May require AC bracket.

39.) Shortie design for maximum

ground clearance.

44.) Vehicles equipped with

locking steering columns

require linkage to be removed.

46.) OEM big-block frame stands

and motor mounts must be used

to ensure proper header fit.

STARTING AT

$399.95

What is the main thing you’re looking for when shopping for a new set of headers? Performance of course! And with Doug’s, you’ve got it. You’ll also

get the ease of installation and a great selection of applications for all years. And Doug’s headers feature heavy wall construction with 3/8" thick

mounting flanges, ensuring durability and longevity under the most demanding circumstances. All the necessary mounting hardware is included with

each set: bolts, gaskets, and reducers. It’s a no brainer. Look no further than Doug’s for your next set of headers. Available in a high-temp protective

EA310 coating or coated finish.

CH22483/CH22484 - Small-block full-length headers - 1-5/8" tubes, 3" collector, will work on angle plug, stock or Sportsman heads, automatic or

manual transmission

CH22485/CH22486 - Small-block shorty headers - 1-5/8" tubes, 3" collector, will work on angle plug, stock or Sportman heads, automatics only

CH25267/CH25268 - Big-block shorty headers - 1-3/4" tubes, 3" collector, console shift only, OEM BB frame stands and motor mounts must be used to

ensure proper fit.

CH22483 EA310 (1,5,9,10,35,44)(Doug's # D308N)............................................................................................................................................ pair 399.95

CH22484 Coated (1,5,9,10,35,44)(Doug's # D308C)........................................................................................................................................... pair 519.95

CH22485 EA310 (1,5,9,10,35,39,44)(Doug's # D304N)....................................................................................................................................... pair 399.95

CH22486 Coated (1,5,9,10,35,39,44)(Doug's # D304C)...................................................................................................................................... pair 519.95

CH25267 EA310 (3,5,26,31,32,39,44,46)(Doug's # D306N)................................................................................................................................ pair 399.95

CH25268 coated (3,5,26,31,32,39,44,46)(Doug's # D306C)................................................................................................................................ pair 519.95

NOTE: The nickel headers are Electroless Nickel Plated with a non-rust protective finish, which makes them impervious to rust, flaking, or bubbling.

307


Exhaust Accessories

X-Over Pipe

Balances exhaust pulses

for more power

Electric Exhaust Cut-Outs

$119.95

CH22490 2 1/2"................................................................. each 119.95

CH22491 3"....................................................................... each 119.95

Hooker Super Competition

Exhaust Racing Cut-A-Ways

$499.95

Stainless slides, Dayton gear reduction motors, harness pre-wired for easy

installations, self-synchronizing motors, ceramic coated. You can be uncorked

at a push of a button for race tracks that don’t require mufflers. Mounts between

collector & headpipes.

CH22492 2-1/2"..................................................................... set 499.95

CH22493 3"........................................................................... set 499.95

CH22494 3-1/2"..................................................................... set 499.95

Big-Block Exhaust Manifolds

BBEM001

$23.95

This is the easy way to uncork your headers without having to drop the head

pipes. By welding Cut-A-Ways to the front of your head pipes at the

collector, you can use a wrench one-handed to turn the acorn nuts off the

machined block-off plate and free up the horsepower. Features include:

-One part can be adapted to fit 2"-3-1/2" diameter pipes

-By using one of Hooker’s three different sized collector ring kits

(see listing for different sizes and part numbers), the Cut-A-Ways

will work on different brands of headers,

-Block-off plate and ring surface are machined so no gaskets are needed.

-Removable studs make changing damaged studs easy.

-Chrome acorn nuts and studs don’t require special tools for

installation and removal.

-Cut-A-Ways are coated with high heat-resistant black paint.

CH24857 2"-3-1/2" exhaust............................................... pair 64.95

CH24858 collector ring (2-1/2")......................................... KIT 23.95

CH24859 collector ring (3")............................................... KIT 23.95

CH24860 collector ring (3-1/2")......................................... KIT 23.95

$369.95

These exhaust manifolds are manufactured to original GM specifications right

down to the original GM casting numbers.

BBEM001 70-72 w/o smog.................................................. pair 369.95

BBEM002 70-72 w/smog..................................................... pair 369.95

NOTE: This item is OVERSIZED and requires an additional freight charge of $14.95 each.

Mr. Gasket Cable Operated

Exhaust Cut-Outs

$46.95

This cut-out, allows you to control the flow of your vehicle’s exhaust either

through the stock exhaust system or straight out of the pipe. will accept 2"

O.D. exhaust pipes, and made of durable cast iron. Comes complete with a

control cable and installation instructions.

CH24872 1 required.............................................................. each 46.95

308


Exhaust Accessories

Flowmaster Header Collector

Ball Flange Kit

Exhaust Insulating Wrap

STARTING AT

$60.95 STARTING AT

This is a gasket-free bolt together design. These quality flange kits are

intended to replace a standard 3-bolt flange on header collectors. The design

relies on a tapered flare to seal the connection and never having problems

with gaskets blowing out or leaking. This is a two-piece unit designed to

bolt together with a slip-fit tapered ball connection. Includes all necessary

bolts, nuts and washers.

CH22302 3.5" collector, 2.5" exhaust (Flowmaster # 15922)... each 77.95

CH22303 3.5" collector, 3.0" exhaust (Flowmaster # 15923)... each 77.95

CH22304 3.0" collector, 2.25" exhaust (Flowmaster # 15924).. each 60.95

CH22305 3.0" collector, 2.5" exhaust (Flowmaster # 15925)... each 60.95

NOTE: Original header collector must be removed and welding of new ball flanges in their place.

ARP Header Bolts

STARTING AT

$13.95

$8.95

Reduces under hood temperatures up to 70%. Withstands continuous heat up to

2000F. Increase life of engine & electronic system components. Snaptrap is

necessary to secure insulation wrap. Available in graphite black as well.

Increase Horsepower and fuel efficiency.

C220379 1" x 1/16" x 50’....................................................... each 23.95

C220380 2" x 1/16" x 50’....................................................... each 35.95

C220381 2" x 1/16" x 100’..................................................... each 73.95

C220382 1" x 1/16" x 15’....................................................... each 8.95

C220383 2" x 1/16" x 15’....................................................... each 13.95

C220384 1" x 1/16" x 50’ (black)........................................... each 28.95

C220385 2" x 1/16" x 50’ (black)........................................... each 42.95

C220386 2" x 1/16" x 100’ (black)......................................... each 74.95

C220387 snap strap 20’strap/20 clips................................... each 16.95

C220388 snap strap 25’strap/25 clips................................... each 17.95

High-Velocity Exhaust Jackets

Rated at 170,000 psi, these are the best bolts made for your headers.

Available in stainless or black oxide.

CH20084 BB 3/8 hex head - black............................... set 18.95

CH20085 BB 12 pt. head - black.................................. set 18.95

CH20086 BB 3/8 hex head - stainless.......................... set 26.95

CH20087 BB 12 pt. head - stainless............................. set 26.95

CH20080 SB 3/8 hex head - black............................... set 13.95

CH20081 SB 12 pt. head - black.................................. set 13.95

CH20082 SB 3/8 hex head - stainless.......................... set 19.95

CH20083 SB 12 pt. head - stainless............................. set 19.95

Hi-Heat Coating

$9.95

To finish off Exhaust Insulating Wrap, it’s

recommended to use Hi-Heat Coating.

This will protect the wrap from abrasions

and harmful liquid spills. Resins and binders

toughen the surface to help extend the life

of the wrap by protecting it from friction

and sealing the pores.

CH24993 Black - 11 oz....................................................... each 9.95

CH24994 Aluminum - 11 oz................................................ each 9.95

$74.95

This exhaust header wraps can reduce engine compartment exhaust heat up to

70%. Installs with headers mounted, provides maximum breathability, and can

withstand heat up to 2000-degrees F, works on all headers using 2"-diameter

primary tubes or smaller.

C220378 V8.......................................................................... KIT 74.95

NOTE: Kit includes 22" insulation for each primary tube and all necessary clips.

Cool It- Thermotec Clamp-On

Heat Shield

STARTING AT

$21.95

The Cool-It composite construction clamp-on heat shields use a proprietary

Thermal-Conduction-Technology developed by Thermo-Tech. They are great

for blocking heat from your fuel lines and battery cables. These clamp-on heat

shields reject 98% of the damaging radiant heat from the exhaust system and

engine. Keeping the temperature of the fuel lines down prevents vapor lock and

the cooler the fuel the more the power. Clamping the heat shields on the battery

cables prevents the cables from melting on the exhaust manifolds or causing a

voltage drain from overheated cables. Reject the heat!

CH25923 1 ft.......................................................................... each 21.95

CH25924 2 ft.......................................................................... each 30.95

CH25925 3 ft.......................................................................... each 38.95

309


Exhaust Accessories

Original Exhaust Manifold Bolts

Exhaust Manifold Heat

Riser Valves

$19.95

All original with correct head markings. 3/8" extra-thick original washer.

38EX000 70-72 small-block................................................ set 19.95

Exhaust Manifold French

Lock Sets

STARTING AT

$59.95

The valve assemblies include all working assembled parts, as shown.

87A0014 70 4BC, BB..................................................... each 59.95

87A0012 70-72 SB.............................................................. each 59.95

87A0013 71 454 w/sp/hi-perf......................................... each 109.95

Stainless Steel Exhaust Clamps

$13.95

CH25631 70-77 SB............................................................. set 13.95

STARTING AT

$4.95

This sturdy stainless steel clamp will never rust. It is commonly used on the

rear next to the exhaust tip, where the clamp is visable.

C210121 70-77 2-1/2" inlet.............................................. each 6.95

0200T 70-77 T.bolt exhaust clamp.............................. each 4.95

310


Exhaust Accessories

Exhaust Flange Stud Kit

$24.95

Studs that hold the headpipe to the exhaust manifolds. These high-quality

reproductions are made of stainless steel to inhibit rust. Superior to OEM quality.

DETSS38 70-77 .................................................................................................................................................................................................... KIT 24.95

Koolmat Muffler Heat Shield

High flexible heat shield,

reflects heat away

$51.95

Highly flexible heat shield secures tightly to undercarriage.

Made of woven silica w/flexible Mylar finish. Used to reflect radiant heat away

from floorboard between muffler & body.

C220389 24" x 40" Mylar....................................................... each 51.95

Billet Exhaust Tips

STARTING AT

$34.95

CH22178

CH22175

CH22181

These billet exhaust tips have a polished finish and are available with flames, Bow Tie, or ball-milled.

Made of 6061 T-6 aircraft aluminum with a 3" square body with 2", 2-1/4", or 2-1/2" diameter pipes.

CH22175 flames - 2"............................................................................................................................................................................................... each 34.95

CH22176 flames - 2-1/4"......................................................................................................................................................................................... each 39.95

CH22177 flames - 2-1/2"......................................................................................................................................................................................... each 39.95

CH22178 ball milled - 2".......................................................................................................................................................................................... each 34.95

CH22179 ball milled - 2-1/4".................................................................................................................................................................................... each 39.95

CH22180 ball milled - 2-1/2".................................................................................................................................................................................... each 39.95

CH22181 "powered by" - 2"..................................................................................................................................................................................... each 34.95

CH22182 "powered by" - 2-1/4"............................................................................................................................................................................... each 39.95

CH22183 "powered by" - 2-1/2"............................................................................................................................................................................... each 39.95

311


Exhaust Accessories

Megaphone-Style Exhaust Tips

1970-72 Oval Chrome

Exhaust Tips

CH25346

STARTING AT

$49.95

CET0002

CH25358

Now available, 2 styles to choose from. The reproduction tips are not exactly

like the GM ones, but are less expensive. The originals feature the GM part

number on them as you would expect. The reproduction ones appear slightly

larger than the originals.

CET0002 70-72 (reproduction)............................ pair 59.95 49.95

A360 70-72 (original GM)............................. pair 159.95 149.95

NOTE: Fits 2-1/2" tailpipes.

Oval-Style Exhaust Tips

Precision manufactured in chromed mild steel and polished stainless steel.

Available with either a straight or angle cut outlet.

Part # Tail Pipe

Dia.

Outlet

Dia. (A)

Overall

Length (B)

Mount Price

CHROME PLATED

CH25355 2" 4" S 11-3/8" Weld $36.95

CH25356

CH25357

CH25358

CH25359

CH25360

2"

2-1/4"

2"

2"

2-1/4"

4"

4"

4"

4"

4"

S

S

A

A

A

17-1/2"

10-3/4"

11-3/8"

17-1/2"

10-3/4"

Weld

Clamp

Weld

Weld

Clamp

$42.95

$38.95

$36.95

$42.95

$38.95

STAINLESS STEEL

CH25346 2" 4" S 11-1/2" Clamp $48.95

CH25347 2" 4" S 17-1/2" Weld $48.95

CH25348 2-1/4" 4" S 10-3/4" Clamp $48.95

CH25349 2-1/2" 4" S 13-1/2" Clamp $49.95

CH25350 3" 4" S 11" Clamp $41.95

CH25351 2" 4" A 11-1/2" Clamp $48.95

CH25352

CH25353

CH25354

CLAMPS

2"

2-1/4"

2-1/2"

4"

4"

4"

A

A

A

17-1/2"

10-3/4"

13-1/2"

Weld

Clamp

Clamp

$48.95

$48.95

$49.95

0100T

C210121

2-1/4"

2-1/2"

0"

0"

0"

0"

Clamp

Clamp

$4.95

$6.95

PART #

TAIL PIPE DIA.

OUTLET DIA. (A)

Note: A= angle outlet, S= straight outlet.

LENGTH (B)

MOUNT

PRICE

Part # Tail Pipe

Dia.

Outlet

Dia. (A)

Overall

Length (B)

Mount Price

CHROME PLATED

CH25336 2" 2-1/8" x 5" S 11-3/8" Weld $40.95

CH25337 2-1/4" 2-1/8" x 5" S 10-3/4" Clamp $42.95

CH25338 2" 2-1/8" x 5" A 11-3/8" Weld $40.95

CH25339 2-1/4" 2-1/8" x 5" A 10-3/4" Clamp $42.95

STAINLESS STEEL

CH25341 2" 2-1/8" x 5" S 11-3/8" Weld $44.95

CH25342 2-1/4" 2-1/8" x 5" S 10-3/4" Clamp $45.95

CH25343 2" 2-1/8" x 5" A 11-3/8" Weld $44.95

CH25344 2-1/4" 2-1/8" x 5" A 10-3/4" Clamp $45.95

CH25345 2-1/2" 2-1/8" x 5" A 9-1/4" Clamp $45.95

PART #

CH25338

Available in either chromed steel or highly polished 409 stailess steel.

Your choice of a straight or angle cut outlet.

TAIL PIPE DIA.

OUTLET

DIA. (A)

Note: A= angle outlet, S= straight outlet.

LENGTH (B)

MOUNT

PRICE

312

More magazines by this user
Similar magazines