conveying chains - tecoStyle
conveying chains - tecoStyle
conveying chains - tecoStyle
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
LO-PROFILE<br />
EXTENDED PITCH<br />
Single Pin<br />
Driving Link<br />
Single Pin<br />
Driving Link<br />
Produced to the same quality standards<br />
as standard conveyor, Ramsey Lo-Profile<br />
Single Pin conveyor has a reduced overall link<br />
Guide Link<br />
height and larger flats on link points.<br />
The increased surface area on the bottom of the<br />
chain serves to reduce bearing stress on wear plates,<br />
effectively reducing link wear and resistance to<br />
sliding. It works well where a more compact chain<br />
is needed.<br />
1/2"<br />
Single Pin Assembly<br />
Pitch Line<br />
.202"<br />
.402"<br />
Extended pitch conveyor was<br />
developed in cooperation with<br />
Single Pin glass industry engineers looking<br />
Guide Link<br />
for a lightweight, long-lasting<br />
chain that would operate on existing 1/2" pitch<br />
sprockets. This was achieved by increasing the<br />
average thickness of individual links from 0.060"<br />
to 0.090" and increasing the pitch from 1/2" to 1".<br />
The resulting chain has less mass than a<br />
comparable width standard conveyor. With fewer<br />
joints per foot, it has a reduced number of<br />
contacts for fouling and wear.<br />
1"<br />
Pitch Line<br />
.280"<br />
.490"<br />
Single Pin Assembly<br />
4
Change language