Datasheet solar panel SHARP Thin Film Amorphous ...

NA series (1.42 m 2 )
135 W | 128 W | 121 W
Microamorphous silicon thin-film photovoltaic modules
Say yes to solar power!
Because it protects the climate.
Innovations from a
photovoltaic pioneer
As a solar specialist with
50 years' experience in
photovoltaics (PV), Sharp
makes significant contributions
to groundbreaking
progress in solar technology.
The NA series of thin-film
photovoltaic modules consists
of an amorphous and a
microcrystalline silicon layer.
This microamorphous tandem
structure not only absorbs visible
light but also the invisible
portion of the solar spectrum.
This makes especially efficient
use of solar energy.
All module types of the Sharp NA Series
offer optimum system integration, in
terms of both technology and economy,
and are suitable for installations in gridconnected
PV systems.
Brief details for the installer
■ Tandem structure consisting of an amorphous
and a microcrystalline silicon layer
■ 180 cells
■ 2,400 N/m 2 mechanical load-bearing capacity (245 kg/m 2 )
■ 1,000 V DC maximum system voltage
■ IEC/EN 61646, IEC/EN 61730, Class II (VDE: 40023069)
Product features
■ Tandem structure with an amorphous and a microcrystalline silicon
layer offering a stabilised module efficiency of up to 9.5%.
■ Optimised for grid-connected roof mounting PV systems.
■ Use of white glass, encapsulation material, weather protection film
and a newly designed silver anodised aluminium frame for long-term
use. This guarantees simple and safe installation.
■ Higher energy yields per watt at high temperatures.
■ Output: connection cable with waterproof plug connector.
Quality from Sharp
Benchmarks are set by the quality standards of Sharp Solar.
Con tinual checks guarantee a consistently high level of quality.
Every module undergoes visual, mechanical, and electrical
inspection. This is recognisable by means of the original Sharp
label, the serial number, and the Sharp guarantee:
■ 10-year product guarantee
■ 10-year performance guarantee on a power output of 90%
■ 25-year performance guarantee on a power output of 80%
The detailed guarantee conditions and additional information can
be found at www.sharp.eu/solar.
■ End users are required to register the modules with Sharp in order
for the product and service warranty to be effective.
The registration documents will be handed out by the installation
staff or supplied directly by Sharp.
As at: January 2012

Open-circuit voltage V oc, I sc, P max (%)
c
)
)
120
110
100
90
80
70
60
50
40
30
20
10
0
120
100
80
60
40
20
0
0 60
P m
140
Power (W)
Mechanical data
Cell
Bypass diodes 1
140
120
3.5 1,000 (W/m 2 )
110
120
Temperature coefficient – short-circuit current l sc +0.07 +0.07 3.0 +0.07 +0.07 100 +0.07 +0.07 % / °C
800 (W/m 2 )
100
90
2.5
V oc
Temperature coefficient – power P
80
m – 0.24 – 0.24 600 (W/m– 2 ) 0.24 – 0.24 – 0.24 – 0.24 % / °C
80
2.0
70
The electrical data applies under standard test conditions (STCs): irradiation 1,000 W/m 2 with light spectrum AM 1.5 and a cell temperature of 6025 °C. The rated electrical
60
characteristics P max
are subject to a manufacturing
1.5 400 (W/m 2 )
50
tolerance of + 10 % / – 5 % (121, 128 W p) and + 5 % / – 5 % (135 W p). NOCT conditions: irradiation of 800 W/m 2 , ambient temperature of 20 °C and wind speed of 1 m/s.
1.0
40
40
200 (W/m 2 )
I sc
30
0.5
20
20
0
Characteristic curves NA-F135GK
Applications
10
10 20 30 40 50 60
0
,
Characteristic curves: open-circuit voltage / shortcircuit
current and maximum power vs. irradiation Characteristic curves: normalised values
■ On-grid PV systems
Characteristic curves: current / power vs. voltage
(cell temperature: 25 °C)
(cell temperature: 25°C)
I sc / V oc / P max vs. cell temperature
1,40 , 9
140
120
Frame r
1,409
■
Solar ce l
3.5 1,000 (W/ 2
On-roof l r ll PV systems
. , ( /m 2 ) )
Frame
Solar cell 110
I sc
120
. 3.0
100
800 ((W/ /m 2 )
P m
V oc 100
90
. 2.5
V V ■
oc
oc
Ground-mounted PV systems
Junction box 80
600 ((W/ /m 2 )
80
J Junction box
P max
. 2.0
70
60
60
1,409
. 1.5 400 ((W/ /m 2 )
P max
120
50
Frame
Solar cell
Please read our detailed installation manual carefully
before installing the photovoltaic modules.
. 1.0
40
110
40
200 ((W/ /m 2 )
II ,
sc Screw
100
Junction box 30
. 0.5
20
1,409
46
90
20
The instructions in the installation manual must
140
120
Frame
Solar cell
V oc
3.5 1,000 (W/m 2 )
0 Plug connector
110
80
120
10
always be observed (e. g. minus pole must be
10 20 30 40 3.0 50 06
100
800 (W/m
0
Junction box
70
2 )
100
90
2.5
V oc
,,
grounded, protection
Screw r
with blocking diodes/fuses).
80
60
600 (W/m Glass
Voltage (V) P Current vs. voltage
2 )
80
Junction box
max
2.0
70
J Junction box
50
Power vs. voltage
60
60
Irradiance (W/m 2 1.5 400 (W/m )
Cell temperature 46(°C)
2 )
P max
50
40
Side seal Plastic Solar cell
1,409
I sc
1.0
40
40
200 (W/m Back cover
30
2 )
I sc
30
Plug l connector t r
120
Frame
0.5
20
Solar cell
3.5 Frame 1,000 (W/m
Exterior dimensions
2 )
20
110
20
0
10 120
100
10 20 30 40 503.060
800 (W/m
90
Note
2 )
10
0
100
2.5
, V
74
oc
Screw
80
Junction box
0
II 600 (W/m sc
2 )
80
Junction box
2.0
70
46
,
Gla l sss
900 ± 30
900 ± 30 60
60
Screw
1.5 400 (W/m P
P
2 )
max Junction box
Plug connector
m
50
74
1,409
1.0
4046
40
V I
oc
200 (W/m sc
Rear view
Cross-section A-A’ Technical data is subject to change without prior
2 )
30
Frame I 0.5
20
sc
20
Solar cell
1,409Plug connector
Glass
0
notice. Side i s seal l Before P l lasti stic using Solar Sharp l r ce lllproducts, please request
P m
10
10 20 30 40 50 60
649.5 8,0
V oc
0
Back rcover
,
Screw the latest data sheets from Sharp. Sharp accepts
Side seal Plastic Solar Junction cell box
46
Back cover
no
Frame rresponsibility for damage to devices which have
Glass
Frame
Plug connector
been equipped with Sharp products on the basis of
Junction box
I sc
Open-circuit voltage V oc, I sc, P max (%)
Current (A
Normalised values I
cs , V o , P
m
(% )
1,009
46
Tandem cell of amorphous (-Si) and
microcrystalline (c-Si) silicon
Dimensions 1,409 × 1,009 × 46 mm (1.42 m 2 )
Weight
Connector
18 kg
SMK (MC4 compatible), Type CCT9901-2452F / CCT9901-2362F
To extend the module connection leads, only use SMK connector from the same series or
MultiContactAG MC4 connector (PV-KST04/PV-KBT04)
Electrical data
Power (W
Junction box
Plug connector
Open-circuit voltage V o c, I s c, Pm a x (%)
Screw
Initial values
Current (A)
Normalised values I sc, V oc, P m (%)
Limit values
Storage air humidity (relative) up to 90 %
Operating temperature (cell) – 40 to + 90 °C
Storage temperature – 40 to + 90 °C
Maximum system voltage 1,000 V DC
Maximum mechanical load 2,400 N/m 2
Over-current protection 5 A
1,00
9
Power (W)
Open-circuit voltage V oc, I sc, P max (%)
Plastic 090 Solar ± 30 cell
Back cover
Nominal values
NA-F135GK NA-F128GK NA-F121GK NA-F135GK NA-F128GK NA-F121GK
Maximum power 158.9 W p 150.6 W p 142.4 W p 135 W p 128 W p 121 W p
Open-circuit voltage V oc 62.5 60.8 60.2 61.3 59.8 59.2 V
Short-circuit current I sc 3.49 3.54 3.43 3.41 3.45 3.34 A
Voltage at point of maximum power V pm 49.7 48.6 48.2 47.0 45.4 45.0 V
Current at point of maximum power I pm 3.20 3.10 2.96 2.88 2.82 2.69 A
Module efficiency m 9.5 9.0 8.5 %
NOCT 44 44 44 °C
Temperature coefficient – open-circuit voltage V oc – 0.30 – 0.30 – 0.30 – 0.30 – 0.30 – 0.30 % / °C
1,009
Current (A)
Normalised values I sc, V oc, P m (%)
Current (A)
Normalised values I sc, V oc, P m (%)
Power (W)
Open-circuit voltage V oc, I sc, P max (%)
140
I sc
P m
V oc
1,009
Power (W)
Open-circuit voltage V oc, I sc, P max (%)
1,009
900 ± 30
Side seal
Frame
Connection cable
1,009
74
504.5 8.0
74
1,009
74
Cross-section B-B’
Plastic Solar 900 ± 30cell
900 ± 30
Back cover 74
Side seal
900 ± 30
900 ± 30
Frame
74
74
Glass
900 ± 30
unverified information.
74
The specifications may deviate slightly and are not
090 ± 30
guaranteed. Installation and operating instructions
74 1,409
are to be found in the corresponding handbooks, or
649.5 8,0
can be downloaded from www.sharp.eu.
This module should not be directly connected to
a load.
1,009
504.5 8.0
1,409
649.5 8,0
1,009
46
The photo on the front page shows a 31.74 kWp thin-film system by Sharp at an agricultural building in Rodenäs, Germany.
1,409 ,
649. .
Glass
Sharp Energy Solution Europe
Side seal Plastic Solar cell
a division of Sharp Electronics (Europe) Back cover GmbH
Frame
Sonninstrasse 3, 20097 Hamburg, Germany
Tel: + 49 (0) 40 / 2376 - 0 · Fax: + 49 (0) 40 / 2376 - 21 93
74
www.sharp.eu/solar
900 ± 30
900 ± 30
74
1,009
Local responsibility:
Austria
SolarInfo.at@sharp.eu
Benelux
SolarInfo.seb@sharp.eu
Central & Eastern Europe
SolarInfo.scee@sharp.eu
1,409
649.5 8,0
504.5 8.0
1,409
1,009
Denmark
SolarInfo.dk@sharp.eu
France
SolarInfo.fr@sharp.eu
Germany
SolarInfo.de@sharp.eu
1,009
649.5 8,0
SunFields Europe
Lope Gomez de Marzoa - Feuga 12
Santiago de Compostela, 15706, Spain
504.5 8.0
Scandinavia
SolarInfo.sen@sharp.eu
Spain & Portugal
SolarInfo.es@sharp.eu
Switzerland
SolarInfo.ch@sharp.eu
United Kingdom
SolarInfo.uk@sharp.eu
Tel: + 34 981 59 58 56· Mail: info@sfe-solar.com
www.sfe-solar.com
504.5 8.0
1,00
9
SolarNA_142_E0112