oliver valves power industry

alton.com.sg

oliver valves power industry

POWER INDUSTRY

AND

STEAM PLANT

VALVES

AND MANIFOLDS

ASME B31.1 POWER PIPING CODE

RELIABILITY UNDER PRESSURE


ASME B31.1 VALVES

Needle Valves

Features:

• Unique Oliver design non rotating tip

• Specifically designed for high pressure, high

temperature service

• Anti blow out spindle

• ASTM listed body and seal housing material

• Head unit locking plate

• High temperature pusher design

• Positive bubble tight shut off

• Rolled stem threads for extended valve life

• Stem features a special ten micro inch super

finish on the seal diameter which provides

minimum friction and wear between packing

and stem

Technical:

Seats: 316 stainless steel metal to metal

(stellite inlaid seat and stellite tip option

available, also soft and metering tip options

consult factory for temperature ratings)

Maximum Working Temperature:

Grafoil packing 540 0 C (1004 0 F) (at reduced pressure)

Maximum Working Pressure:

Standard 6,000 psi (414 bar) at 38 0 C (100 0 F)

High pressure 10,000 psi (690 bar) at 38 0 C

(100 0 F)

Bore: 0.21” (5.4mm)

CV: 0.46

Handle: T bar (handle locking and position indication available)

Gauge & Two Valve Manifolds

As well as isolation the B31.1 head unit can easily be

incorporated into gauge multiport valves and two valve

manifolds Ideal for isolation, blow down, gauging and block and

bleed applications in direct mounting or remote mounting

configurations also threaded or socket weld and inlet extensions

can be supplied in standard formats.

Three and Five Valve Manifolds

Three and five valve manifolds for differential pressure

measurement applications, both direct and remote mounted

types including various configurations. Many options such as

panel-mounting holes, anti tamper, and designs for integral

steam blocks or other steam tracing requirements. Other specific

manifolds include close coupled range, wall mounting manifold

range as well as dual instrument installation manifolds.


ASME B31.1 VALVES

Gland Outside Screw and Yoke Valves

Features:

• Valving incorporating the gland outside

screw and yoke design of head unit

• Non-rotating tip

• Specifically designed for high pressure,

high temperature service

• Anti blow out spindle

• ASTM listed body and seal housing material

• Positive bubble tight shut off

• Rolled stem threads for extended valve life

• Stem features a special ten micro inch super

finish on the seal diameter which provides

minimum friction and wear between packing

and stem

Technical:

Seats: 316 stainless steel metal to metal

(stellite inlaid seat and stellite tip option available)

Maximum Working Temperature

PTFE Packed (standard) 240 0 C (464 0 F)

Grafoil packed 400 0 C (752 0 F) (at reduced pressure)

Maximum Cold Working Pressure

Standard 6,000 psi (414 Bar) at 38 0 C (100 0 F)

Bore:

/OSY .22” (5.6mm) bore

/OSY38 .375” (9.5mm) bore

Handle: T bar (handle locking and position indication available)

Severe Service Valves

Features:

• 3 Standard bore sizes 4mm, 6mm and 11mm

• Non rotating tip

• Specifically designed for high pressure, high

temperature severe service

• Anti blow out spindle

• ASTM listed body and seal housing material

• High temperature pusher designs

• Positive bubble tight shut off

• Rolled stem threads for extended valve life

• Stem features a special ten micro inch super

finish on the seal diameter which provides

minimum friction and wear between packing

and stem

Technical:

Seats: 316 stainless steel metal to metal

(stellite inlay seats and stellite tip option available)

Maximum Working Temperature:

Grafoil packing 540 0 C (1004 0 F) (at reduced pressure)

Maximum Working Pressure:

Standard 6,000 psi (414 Bar) at 38 0 C (100 0 F)

1,715 psi (118 bar) at 650 0 C (1,200 0 F)

Bore/CV:

11mm (7/16”) cv=2.2

6mm (1/4”) cv=0.86

4mm (5/32”) cv=0.35

Handle: T bar (handle locking and position indication available)

Blow Down Manifold

Steam blow down valves and

traditional 3 valve manifold in

one. First blow down via the

two cross bar handled vents

which incorporate stellite tips

(stellite seats optional), utilize

the isolates and equalize valves

as used in a standard three

valve manifold configuration.

Double Block Manifold

Incorporating two

SSV11 valves in a

compact weight saving

one-piece body, fewer

parts required over a

traditional assembly,

reducing cost of

assembly and reduction

in pipe stresses.

Example shows an SSV11

valve utilizing 11mm bore on

this double block


Other Products

Gauge Accessories

Gauge Syphons: Protecting gauges from steam by condensing into water via the units internal

chambers in a compact 2.81” length, replacing larger fabricated pig tail syphons.

Gauge Adaptors: Allowing 360 0 positioning of gauges on site

Gauge Snubber: Protects gauges from line surges by dampening variations down via a small

variable orifice.

Sample Cylinders: For the safe efficient handling and transportation of liquid or gas samples from a

process sampling point. Sample Cylinders are available in various sizes and materials. In addition

various options of valves, electro polished finish end caps and carrying handles may be offered.

How to order

Stage 2 Material (*)

E.G.

S

C

316 Stainless Steel

EN1A Carbon Steel

Y 3 4 S / B 3 1

(other materials available on request)

Stage 3 Connections

FSW

MSW-SCH***

BW-SCH***

Female socket weld connections

Socket weld, schedule 40, 80, 160, XXS (nominal pipe size)

Butt weld schedule 40,80,160,XXS (nominal pipe size)

Stage 1

Standard Power Needle Valves (bore 5.4mm)

F25*/B31 Hand Valve 1 /4” female x female

F38*/B31 Hand Valve 3 /8” female x female

F50*/B31 Hand Valve 1 /2” female x female

M50*/B31 Hand Valve 1 /2” male x female

OR50*/B31

OR75*/B31

GM1*/B31

GM1*/3EXT/B31

GM175/50*/B31

G12FF*/B31

YH24*/B31

Y24*/B31

Y34*/B31

Y33*/B31

Y53*/B31

Y54*/B31

Orifice plate style multiport root valve, utilizing standard needle valve 1 /2” NPT

connections (1 inlet, 2 outlets)

Orifice plate style multiport root valve, utilizing standard needle valve 3 /4” NPT

connections (1 inlet, 2 outlets)

Gauge multiport valve 1 /2” NPT connections (1 inlet, 3 outlets)

3” Ext Gauge multiport valve 1 /2” NPT connections (1 inlet, 3 outlets)

Gauge multiport valve 3 /4” NPT inlet connection, x 3, 1 /2” NPT outlet

connections (1inlet, 3 outlets)

Two valves manifold, pipe to pipe 1 /2” NPT female x female

Direct mounting pipe to flange two valve manifold utilizing 2 sets of bolting

Direct mounting pipe to flange two valve manifolds

Direct mounting pipe to flange three valve manifold

Remote mounting pipe to pipe three valve manifold

Direct mounting pipe to flange five valve manifold

Remote mounting pipe to pipe five valve manifold

OS & Y Valves (Bores 5.6mm=OSY, 9.5mm=OSY38 (Shown))

F50*/OSY38 Hand valve style 1 /2” female x female

F75*/OSY38 Hand valve style 3 /4” female x female

GM1*/OSY38 Gauge multiport valve 1 /2” NPT cons (1 inlet, 3 outlets)

OR50*/OSY38 Orifice plate style multiport root valve 1 /2” NPT (1 inlet, 2 outlets)

OR75*/OSY38 Orifice plate style multiport root valve 3 /4” NPT (1 inlet, 2 outlets)

Severe Service Valves (Bores 4mm, 6mm, 11mm)

F25*/SSV4 Severe Service Needle Valve 4mm bore, 1 /4” NPT female x female

F25*/SSV6 Severe Service Needle Valve 6mm bore, 1 /4” NPT female x female

F38*/SSV6 Severe Service Needle Valve 6mm bore, 3 /8” NPT female x female

F50*/SSV6 Severe Service Needle Valve 6mm bore, 1 /2” NPT female x female

F50*/SSV11 Severe Service Needle Valve 11mm bore, 1 /2” NPT female x female

F75*/SSV11 Severe Service Needle Valve 11mm bore, 3 /4” NPT female x female

F10*/SSV11 Severe Service Needle Valve 11mm bore, 1” NPT female x female

SW-OD Socket weld, outside diameter tube

BW-OD Butt weld outside diameter tube

25 1/4”

38 3/8”

50 1/2”

14mm

14mm

16mm

16mm

20mm

20mm

25mm

25mm

Stage 4 Options

Other Options: (Specify in alphabetical order)

AT

Anti tamper (eg AT-V if vent)

AT-key

Anti tamper key

ATEQ

AT on equalize (for 3 and 5 valve manifolds)

BKTC

Carbon steel bracket complete with mounting bolts

BKTS

Stainless steel bracket complete with mounting bolts

CSHW

Carbon steel handwheel

FS

Firesafe

HD/10HP

10,000 psi max pressure (Heavy Duty Head unit for isolation valves only)

HD/15HP

15,000 psi max pressure (Heavy Duty Head unit for isolation valves only)

HL

Handwheel locking (PAD - Padlock)

HL-PI

Handwheel locking and position indication

HP

10,000 psi maximum pressure rating (except direct mount) for

Standard needle valve

MTG

Two mounting holes to mount BKT

MT

Metering tip (Needle Valves)

NA

NACE MR-01-75 latest revision

PAD

Padlock (for HL option)

PK

Peek soft tip (Needle Valves)

PM

Panel Mount (gauge valves only)

PP

Pressure plug

SG

Grafoil flange seal rings (Direct mount manifolds)

SSB

Stainless steel bolts (rated to 4,500 psi) for Direct Mount Manifolds

SSB-6K

Stainless steel bolts (rated to 6,000 psi) for Direct Mount Manifolds

SS-TAG

Stainless steel tag

STT

Stellite 6 hard tip

STS

Stellite 12 seat

LTB

For SSV11 valve a 5 1 /4 long tee bar in 316 stainless steel

17.4T 17.4 PH precipitation hardened stainless steel tip

Oliver Valves Ltd., Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England Tel: 01565 632636 (14 Lines)

Fax: 01565 654089 or 01565 650060 Email: sales@valves.co.uk WWW: valves.co.uk or olivervalves.com

The Oliver Group products are made in England and sold and supported in over 50 countries worldwide.

CAT PWR REV1-01


Oliver Valves Power Br NEW.qx 12/5/2004 12:45 PM Page 1

OUR CAPABILITIES

We supply technically advanced, high quality

valve products designed for critical service in

the oil, gas, petrochemical and power

generation industries worldwide.

Our pipeline and instrumentation valves are

available in materials of your choice,

incorporating a wide variety of process

connections. Our modular designs and

manufacturing flexibility, guarantees short

delivery times.

Our ISO 9000 Quality Product Range includes:

NEEDLE VALVES TO

15,000 PSI – (1,000 BAR)

BALL VALVES TO 15,000 PSI – (1,000 BAR)

NEEDLE AND BALL VALVE STYLE

MANIFOLDS FOR ALL MAKES OF

PRESSURE AND FLOW TRANSMITTERS

COMPACT, SPACE SAVING SLIMLINE VALVES

AND MONO FLANGE VALVES

DOUBLE BLOCK AND BLEED VALVES

A WIDE RANGE OF INSTRUMENT ACCESSORIES

SPECIAL HIGH AND LOW TEMPERATURE

VALVES, OXYGEN SERVICE VALVES

CUSTOMISED VALVE PRODUCTS FOR MANY

SPECIAL APPLICATIONS

Wide Product Range

A comprehensive range of instrument and

piping valves designed to meet the

demands of today’s

international

clients.

Unusual

Flexibility

From standard

designs to specially

manufactured

assemblies, we offer total flexibility and

creative innovative design concepts.

Strong Worldwide Capability

Our products –

designed to meet

international

standards – are stocked

and marketed in over

50 countries worldwide

by factory trained local

service specialists.

Delivery

Reliability

The modern modular design and “just in

time” manufacturing philosophy of

Oliver Valves ensuring short lead times,

remain an attractive feature of doing

business with our company.

Power Industry and Steam Plant Valves

to ASME B31-1 Power Piping Code

• Normal Service Valves (• 6,000psi • 240 o C)

NSV11

• Severe Service Valves (• 6,000psi • 650 o C)

SSV6 / SSV9 / SSV11 / SSV16 / SSV20

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 (14 Lines) Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk WWW: valves.co.uk or olivervalves.com

The Oliver Group products are made in England and sold and supported in over 50 countries worldwide.

• Over Critical Severe Service Valves (• 10,000psi • 650 o C)

OSSV6 / OSSV11

CAT POWER REV 1-04


Oliver Valves Power Br NEW.qx 12/5/2004 12:45 PM Page 2

NSV11 Series

Normal Service Needle Valve

• 6000psig @ 38 o C

• 4088psig @ 240 o C

Oliver Valves Normal Service Needle Valve range has been specifically designed to meet the most demanding operating conditions. Engineered

for high performance and high pressure, the Normal Service valve is particularly suited to applications where process flowrate is important.

DESIGN FEATURES

• 11mm Bore

• NPT Threaded Ends

• PTFE Seals

OSSV11 Series

High Pressure Severe Service Needle Valve

• 10,000psig @ 38 o C • 11mm Bore

• 2775psig @ 650 o C • Socket Weld

Oliver Valves Over Critical Severe Service Needle Valve range has been specifically designed to meet the most demanding operating conditions.

Engineered for high pressure and high temperature applications such as steam lines, hot gas and liquids, the Severe Service valve is particularly

suited to power station operations.

DESIGN FEATURES

• 316 Stainless construction, other materials available

• Packing bolt design allows for spindle seal adjustment

• 316 Stainless construction, other materials available

• Packing bolt design allows for spindle seal adjustment

• 100% factory tested to 6000 psig

• Panel mount option available

• 100% factory tested to 10,000 psig

• Panel mount option available

• Non rotating spindle tip provides repetitive leak tight

process shut off

• Safety back seating spindle seals in fully open position

• Fully enclosed body seal ensures leak free body joint

• PTFE gland packing as standard

• Hardened packing bolt to extend thread life

• Non rotating spindle tip provides repetitive leak tight

process shut off

• Safety back seating spindle seals in fully open position

• Firesafe design

• Fully enclosed grafoil body seal ensures leak free body

joint

• Grafoil gland packing as standard

• Hardened packing bolt to extend thread life

TECHNICAL DATA

TECHNICAL DATA

• Pressure-Temperature Rating (see table)

6000psig @ 100 o F (414 bar @ 38 o C)

4088 psig @ 500 o F (282 bar @ 240 o C)

• Cv = 2.2

• Bore Dia = 11mm

• Lubrication - Molybdenum Disulphide

• Weight - 1.7kgs

• No of turns - 4

• Connections - 1 /2” NPT

• Pressure-Temperature Rating (see table)

10,000psig @ 100 o F (690 bar @ 38 o C)

2775 psig @ 1200 o F (191 bar @ 650 o C)

• Cv = 2.2

• Bore Dia = 11mm

• Lubrication - Molybdenum Disulphide

• Weight - 2kgs

• No of turns - 4

• Connections - Female socket weld from 14mm to 28mm

dia

TEMPERATURE

PRESSURE

deg C deg F psi bar MPa

38 100 6000 414 41.4

93 200 5160 356 35.6

149 300 4660 321 32.1

205 400 4280 295 29.5

240 500 4088 282 28.2

TEMPERATURE

PRESSURE

deg C deg F psi bar MPa

38 100 10000 690 68.9

93 200 9290 641 64.1

149 300 8390 579 57.8

205 400 7705 531 53.1

260 500 7165 494 49.4

316 600 6770 467 46.7

344 650 6660 459 45.9

371 700 6515 449 44.9

399 750 6410 442 44.2

427 800 6335 437 43.7

455 850 6265 432 43.2

483 900 6230 430 43.0

510 950 5795 400 40.0

537 1000 5245 362 36.2

566 1050 5155 356 35.5

594 1100 4575 316 31.5

622 1150 3550 245 24.5

650 1200 2775 191 19.1

PART NUMBER

PART NUMBER

EXAMPLE

NSV11/S/50F

316ss - 1 /2” NPT thread inlet & outlet - PTFE seals

Also available in 6, 9, 16 and 20mm full flow bore. Other connections available are compression fitting.

EXAMPLE

OSSV11/S/SW14-OD

OSSV11/S/SW16-OD-IN / SW14-OD-OUT

OSSV11/S/SW18-OD

OSSV11/S/SW20-OD

316ss - 14mm dia socket weld inlet & outlet

316ss - 16mm dia socket weld inlet & 14mm socket weld outlet

316ss -18mm dia socket weld inlet & outlet

316ss - 20mm dia socket weld inlet & outlet

OSSV11/S/SW28-OD

316ss - 28mm dia socket weld inlet & outlet

Also available in 6mm full flow bore. Other connections available are butt weld, threaded and compression fitting.

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk

Website: www.valves.co.uk or olivervalves.com

DATA SHEET No

NSV11 / 1-04

page 1

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk

Website: www.valves.co.uk or olivervalves.com

DATA SHEET No

OSSV11 / 1-04

page 10


Oliver Valves Power Br NEW.qx 12/5/2004 12:45 PM Page 3

OSSV6 Series

High Pressure Severe Service Needle Valve

• 10,000psig @ 38 o C • 6mm Bore

• 2775psig @ 650 o C • Socket Weld

SSV6 Series

Severe Service Needle Valve

• 6000psig @ 38 o C • 6mm Bore

• 1545psig @ 650 o C • Socket Weld

Oliver Valves Over Critical Severe Service Needle Valve range has been specifically designed to meet the most demanding operating conditions.

Engineered for high pressure and high temperature applications such as steam lines, hot gas and liquids, the Severe Service valve is particularly

suited to power station operations.

DESIGN FEATURES

Oliver Valves Severe Service Needle Valve range has been specifically designed to meet the most demanding operating conditions. Engineered

for high pressure and high temperature applications such as steam lines, hot gas and liquids, the Severe Service valve is particularly suited to

power station operations.

DESIGN FEATURES

• 316 Stainless construction, other materials available

• Packing bolt design allows for spindle seal adjustment

• 316 Stainless construction, other materials available

• Packing bolt design allows for spindle seal adjustment

• 100% factory tested to 10,000 psig

• Panel mount option available

• 100% factory tested to 6000 psig

• Panel mount option available

• Non rotating spindle tip provides repetitive leak tight

process shut off

• Fully enclosed grafoil body seal ensures leak free body

joint

• Non rotating spindle tip provides repetitive leak tight

process shut off

• Fully enclosed grafoil body seal ensures leak free body

joint

• Safety back seating spindle seals in fully open position

• Grafoil gland packing as standard

• Safety back seating spindle seals in fully open position

• Grafoil gland packing as standard

• Firesafe design

• Hardened packing bolt to extend thread life

• Firesafe design

• Hardened packing bolt to extend thread life

TECHNICAL DATA

TECHNICAL DATA

• Pressure-Temperature Rating (see table)

10,000psig @ 100 o F (690 bar @ 38 o C)

2775 psig @ 1200 o F (191 bar @ 650 o C)

• Cv = 0.46

• Bore Dia = 6mm

• Lubrication - Molybdenum Disulphide

• Weight - 0.8kgs

• No of turns - 4

• Connections - Female socket weld from 6mm (min) to

20mm dia

• Pressure-Temperature Rating (see table)

6000psig @ 100 o F (414 bar @ 38 o C)

1545 psig @ 1200 o F (107 bar @ 650 o C)

• Cv = 0.46

• Bore Dia = 6mm

• Lubrication - Molybdenum Disulphide

• Weight - 0.5kgs

• No of turns - 4

• Connections - Female socket weld from 6mm (min) to

20mm dia (max)

TEMPERATURE

PRESSURE

deg C deg F psi bar MPa

38 100 10000 690 68.9

93 200 9290 641 64.1

149 300 8390 579 57.8

205 400 7705 531 53.1

260 500 7165 494 49.4

316 600 6770 467 46.7

344 650 6660 459 45.9

371 700 6515 449 44.9

399 750 6410 442 44.2

427 800 6335 437 43.7

455 850 6265 432 43.2

483 900 6230 430 43.0

510 950 5795 400 40.0

537 1000 5245 362 36.2

566 1050 5155 356 35.5

594 1100 4575 316 31.5

622 1150 3550 245 24.5

650 1200 2775 191 19.1

TEMPERATURE

PRESSURE

deg C deg F psi bar MPa

38 100 6000 414 41.4

93 200 5160 356 35.6

149 300 4660 321 32.1

205 400 4280 295 29.5

260 500 3980 274 27.4

316 600 3760 259 25.9

344 650 3700 255 25.5

371 700 3620 250 25.0

399 750 3560 246 24.5

427 800 3520 243 24.3

455 850 3480 240 24.0

483 900 3460 239 23.9

510 950 3220 222 22.2

537 1000 2915 201 20.1

566 1050 2865 198 19.8

594 1100 2545 176 17.6

622 1150 1970 136 13.6

650 1200 1545 107 10.7

PART NUMBER

PART NUMBER

EXAMPLE

OSSV6/S/SW6-OD

OSSV6/S/SW10-OD-IN / SW14-OD-OUT

OSSV6/S/SW18-OD

316ss - 6mm dia socket weld inlet & outlet

316ss - 10mm dia socket weld inlet & 14mm socket weld outlet

316ss -18mm dia socket weld inlet & outlet

EXAMPLE

SSV6/S/SW6-OD

SSV6/S/SW10-OD-IN / SW16-OD-OUT

SSV6/S/SW18-OD

316ss - 6mm dia socket weld inlet & outlet

316ss - 10mm dia socket weld inlet & 16mm socket weld outlet

316ss -18mm dia socket weld inlet & outlet

OSSV6/S/SW20-OD

316ss - 20mm dia socket weld inlet & outlet

SSV6/S/SW20-OD

316ss - 20mm dia socket weld inlet & outlet

Also available in 11mm full flow bore. Other connections available are butt weld, threaded and compression fitting.

Also available in 9, 11, 16 and 20mm full flow bore. Other connections available are butt weld, threaded and compression fitting.

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk

Website: www.valves.co.uk or olivervalves.com

DATA SHEET No

OSSV6 / 1-04

page 9

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk

Website: www.valves.co.uk or olivervalves.com

DATA SHEET No

SSV6 / 1-04

page 2


Oliver Valves Power Br NEW.qx 12/5/2004 12:45 PM Page 4

SSV6 Series

Severe Service Needle Valve

• 6000psig @ 38 o C • 6mm Bore

• 1545psig @ 650 o C • Butt Weld

SSV20 Series

Severe Service Needle Valve

• 6000psig @ 38 o C • 20mm Bore

• 1545psig @ 650 o C • Socket Weld

Oliver Valves Severe Service Needle Valve range has been specifically designed to meet the most demanding operating conditions. Engineered

for high pressure and high temperature applications such as steam lines, hot gas and liquids, the Severe Service valve is particularly suited to

power station operations.

DESIGN FEATURES

Oliver Valves Severe Service Needle Valve range has been specifically designed to meet the most demanding operating conditions. Engineered

for high pressure and high temperature applications such as steam lines, hot gas and liquids, the Severe Service valve is particularly suited to

power station operations.

DESIGN FEATURES

• 316 Stainless construction, other materials available

• Packing bolt design allows for spindle seal adjustment

• 316 Stainless construction, other materials available

• Packing bolt design allows for spindle seal adjustment

• 100% factory tested to 6000 psig

• Panel mount option available

• 100% factory tested to 6000 psig

• Panel mount option available

• Non rotating spindle tip provides repetitive leak tight

process shut off

• Fully enclosed grafoil body seal ensures leak free body

joint

• Non rotating spindle tip provides repetitive leak tight

process shut off

• Fully enclosed grafoil body seal ensures leak free body

joint

• Safety back seating spindle seals in fully open position

• Grafoil gland packing as standard

• Safety back seating spindle seals in fully open position

• Grafoil gland packing as standard

• Firesafe design

• Hardened packing bolt to extend thread life

• Firesafe design

• Hardened packing bolt to extend thread life

TECHNICAL DATA

TECHNICAL DATA

• Pressure-Temperature Rating (see table)

6000psig @ 100 o F (414 bar @ 38 o C)

1545 psig @ 1200 o F (107 bar @ 650 o C)

• Cv = 0.46

• Bore Dia = 6mm

• Lubrication - Molybdenum Disulphide

• Weight - 0.5kgs

• No of turns - 4

• Connections - Butt weld from 12mm (min) to 25mm dia

pipe (max)

• Pressure-Temperature Rating (see table)

6000psig @ 100 o F (414 bar @ 38 o C)

1545 psig @ 1200 o F (107 bar @ 650 o C)

• Cv = 7.0

• Bore Dia = 20mm

• Lubrication - Molybdenum Disulphide

• Weight - 3.3kgs

• No of turns - 6

• Connections - Female socket weld 28mm dia. Other sizes

available but body size will change

TEMPERATURE

PRESSURE

deg C deg F psi bar MPa

38 100 6000 414 41.4

93 200 5160 356 35.6

149 300 4660 321 32.1

205 400 4280 295 29.5

260 500 3980 274 27.4

316 600 3760 259 25.9

344 650 3700 255 25.5

371 700 3620 250 25.0

399 750 3560 246 24.5

427 800 3520 243 24.3

455 850 3480 240 24.0

483 900 3460 239 23.9

510 950 3220 222 22.2

537 1000 2915 201 20.1

566 1050 2865 198 19.8

594 1100 2545 176 17.6

622 1150 1970 136 13.6

650 1200 1545 107 10.7

TEMPERATURE

PRESSURE

deg C deg F psi bar MPa

38 100 6000 414 41.4

93 200 5160 356 35.6

149 300 4660 321 32.1

205 400 4280 295 29.5

260 500 3980 274 27.4

316 600 3760 259 25.9

344 650 3700 255 25.5

371 700 3620 250 25.0

399 750 3560 246 24.5

427 800 3520 243 24.3

455 850 3480 240 24.0

483 900 3460 239 23.9

510 950 3220 222 22.2

537 1000 2915 201 20.1

566 1050 2865 198 19.8

594 1100 2545 176 17.6

622 1150 1970 136 13.6

650 1200 1545 107 10.7

PART NUMBER

PART NUMBER

EXAMPLE

SSV6/S/BW12-OD

SSV6/S/BW12-OD-IN / BW16-OD-OUT

316ss - 12mm dia butt weld inlet & outlet

316ss - 12mm dia butt weld inlet & 16mm butt weld outlet

EXAMPLE

SSV20/S/SW28-OD

316ss - 28mm dia socket weld inlet & outlet

SSV6/S/BW18-OD

316ss -18mm dia butt weld inlet & outlet

Also available in 6, 9, 11, and 16mm full flow bore. Other connections available are butt weld, threaded and compression fitting.

SSV6/S/BW25-OD

316ss - 25mm dia butt weld inlet & outlet

Also available in 11, 16 and 20mm full flow bore. Other connections available are socket weld, threaded and compression fitting.

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk

Website: www.valves.co.uk or olivervalves.com

DATA SHEET No

SSV6 / 1-04

page 3

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk

Website: www.valves.co.uk or olivervalves.com

DATA SHEET No

SSV20 / 1-04

page 8


Oliver Valves Power Br NEW.qx 12/5/2004 12:45 PM Page 5

SSV16 Series

Severe Service Needle Valve

• 6000psig @ 38 o C • 16mm Bore

• 1545psig @ 650 o C • Socket Weld

SSV9 Series

Severe Service Needle Valve

• 6000psig @ 38 o C • 9mm Bore

• 1545psig @ 650 o C • Socket Weld

Oliver Valves Severe Service Needle Valve range has been specifically designed to meet the most demanding operating conditions. Engineered

for high pressure and high temperature applications such as steam lines, hot gas and liquids, the Severe Service valve is particularly suited to

power station operations.

DESIGN FEATURES

Oliver Valves Severe Service Needle Valve range has been specifically designed to meet the most demanding operating conditions. Engineered

for high pressure and high temperature applications such as steam lines, hot gas and liquids, the Severe Service valve is particularly suited to

power station operations.

DESIGN FEATURES

• 316 Stainless construction, other materials available

• 100% factory tested to 6000 psig

• Non rotating spindle tip provides repetitive leak tight

process shut off

• Safety back seating spindle seals in fully open position

• Firesafe design

• Packing bolt design allows for spindle seal adjustment

• Panel mount option available

• Fully enclosed grafoil body seal ensures leak free body

joint

• Grafoil gland packing as standard

• Hardened packing bolt to extend thread life

• 316 Stainless construction, other materials available

• 100% factory tested to 6000 psig

• Non rotating spindle tip provides repetitive leak tight

process shut off

• Safety back seating spindle seals in fully open position

• Firesafe design

• Packing bolt design allows for spindle seal adjustment

• Panel mount option available

• Fully enclosed grafoil body seal ensures leak free body

joint

• Grafoil gland packing as standard

• Hardened packing bolt to extend thread life

TECHNICAL DATA

TECHNICAL DATA

• Pressure-Temperature Rating (see table)

6000psig @ 100 o F (414 bar @ 38 o C)

1545 psig @ 1200 o F (107 bar @ 650 o C)

• Cv = 4.0

• Bore Dia = 16mm

• Lubrication - Molybdenum Disulphide

• Weight - 2.2kgs

• No of turns - 5

• Connections - Female socket weld 25mm dia. Other sizes

available but body size will change

• Pressure-Temperature Rating (see table)

6000psig @ 100 o F (414 bar @ 38 o C)

1545 psig @ 1200 o F (107 bar @ 650 o C)

• Cv = 1.2

• Bore Dia = 9mm

• Lubrication - Molybdenum Disulphide

• Weight - 0.8kgs

• No of turns - 4

• Connections - Female socket weld 14mm (min) to

20mm dia (max)

TEMPERATURE

PRESSURE

deg C deg F psi bar MPa

38 100 6000 414 41.4

93 200 5160 356 35.6

149 300 4660 321 32.1

205 400 4280 295 29.5

260 500 3980 274 27.4

316 600 3760 259 25.9

344 650 3700 255 25.5

371 700 3620 250 25.0

399 750 3560 246 24.5

427 800 3520 243 24.3

455 850 3480 240 24.0

483 900 3460 239 23.9

510 950 3220 222 22.2

537 1000 2915 201 20.1

566 1050 2865 198 19.8

594 1100 2545 176 17.6

622 1150 1970 136 13.6

650 1200 1545 107 10.7

TEMPERATURE

PRESSURE

deg C deg F psi bar MPa

38 100 6000 414 41.4

93 200 5160 356 35.6

149 300 4660 321 32.1

205 400 4280 295 29.5

260 500 3980 274 27.4

316 600 3760 259 25.9

344 650 3700 255 25.5

371 700 3620 250 25.0

399 750 3560 246 24.5

427 800 3520 243 24.3

455 850 3480 240 24.0

483 900 3460 239 23.9

510 950 3220 222 22.2

537 1000 2915 201 20.1

566 1050 2865 198 19.8

594 1100 2545 176 17.5

622 1150 1970 136 13.6

650 1200 1545 107 10.7

PART NUMBER

EXAMPLE

SSV16/S/SW25-OD

316ss - 25mm dia socket weld inlet & outlet

Also available in 6, 9, 11, and 20mm full flow bore. Other connections available are butt weld, threaded and compression fitting.

PART NUMBER

EXAMPLE

SSV9/S/SW14-OD

SSV9/S/SW14-OD-IN / SW20-OD-OUT

SSV9/S/SW18-OD

SSV9/S/SW20-OD

316ss - 14mm dia socket weld inlet & outlet

316ss - 14mm dia socket weld inlet & 20mm socket weld outlet

316ss - 18mm dia socket weld inlet & outlet

316ss - 20mm dia socket weld inlet & outlet

Also available in 11, 16 and 20mm full flow bore. Other connections available are butt weld, threaded and compression fitting.

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk

Website: www.valves.co.uk or olivervalves.com

DATA SHEET No

SSV16 / 1-04

page 7

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk

Website: www.valves.co.uk or olivervalves.com

DATA SHEET No

SSV9 / 1-04

page 4


Oliver Valves Power Br NEW.qx 12/5/2004 12:45 PM Page 6

SSV11 Series

Severe Service Needle Valve

• 6000psig @ 38 o C • 11mm Bore

• 1545psig @ 650 o C • Socket Weld

SSV11 Series

Severe Service Needle Valve

• 6000psig @ 38 o C • 11mm Bore

• 1545psig @ 650 o C • Butt Weld

Oliver Valves Severe Service Needle Valve range has been specifically designed to meet the most demanding operating conditions. Engineered

for high pressure and high temperature applications such as steam lines, hot gas and liquids, the Severe Service valve is particularly suited to

power station operations.

DESIGN FEATURES

Oliver Valves Severe Service Needle Valve range has been specifically designed to meet the most demanding operating conditions. Engineered

for high pressure and high temperature applications such as steam lines, hot gas and liquids, the Severe Service valve is particularly suited to

power station operations.

DESIGN FEATURES

• 316 Stainless construction, other materials available

• 100% factory tested to 6000 psig

• Non rotating spindle tip provides repetitive leak tight

process shut off

• Safety back seating spindle seals in fully open position

• Firesafe design

• Packing bolt design allows for spindle seal adjustment

• Panel mount option available

• Fully enclosed grafoil body seal ensures leak free body

joint

• Grafoil gland packing as standard

• Hardened packing bolt to extend thread life

• 316 Stainless construction, other materials available

• 100% factory tested to 6000 psig

• Non rotating spindle tip provides repetitive leak tight

process shut off

• Safety back seating spindle seals in fully open position

• Firesafe design

• Packing bolt design allows for spindle seal adjustment

• Panel mount option available

• Fully enclosed grafoil body seal ensures leak free body

joint

• Grafoil gland packing as standard

• Hardened packing bolt to extend thread life

TECHNICAL DATA

TECHNICAL DATA

• Pressure-Temperature Rating (see table)

6000psig @ 100 o F (414 bar @ 38 o C)

1545 psig @ 1200 o F (107 bar @ 650 o C)

• Cv = 2.2

• Bore Dia = 11mm

• Lubrication - Molybdenum Disulphide

• Weight - 1.7kgs

• No of turns - 4

• Connections - Female socket weld from 14mm (min) to

28mm dia (max)

• Pressure-Temperature Rating (see table)

6000psig @ 100 o F (414 bar @ 38 o C)

1545 psig @ 1200 o F (107 bar @ 650 o C)

• Cv = 2.2

• Bore Dia = 11mm

• Lubrication - Molybdenum Disulphide

• Weight - 1.6kgs

• No of turns - 4

• Connections - Butt weld to suit from 17mm (min) to 34mm

dia pipe (max).

TEMPERATURE

PRESSURE

deg C deg F psi bar MPa

38 100 6000 414 41.4

93 200 5160 356 35.6

149 300 4660 321 32.1

205 400 4280 295 29.5

260 500 3980 274 27.4

316 600 3760 259 25.9

344 650 3700 255 25.5

371 700 3620 250 25.0

399 750 3560 246 24.5

427 800 3520 243 24.3

455 850 3480 240 24.0

483 900 3460 239 23.9

510 950 3220 222 22.2

537 1000 2915 201 20.1

566 1050 2865 198 19.8

594 1100 2545 176 17.6

622 1150 1970 136 13.6

650 1200 1545 107 10.7

TEMPERATURE

PRESSURE

deg C deg F psi bar MPa

38 100 6000 414 41.4

93 200 5160 356 35.6

149 300 4660 321 32.1

205 400 4280 295 29.5

260 500 3980 274 27.4

316 600 3760 259 25.9

344 650 3700 255 25.5

371 700 3620 250 25.0

399 750 3560 246 24.5

427 800 3520 243 24.3

455 850 3480 240 24.0

483 900 3460 239 23.9

510 950 3220 222 22.2

537 1000 2915 201 20.1

566 1050 2865 198 19.8

594 1100 2545 176 17.6

622 1150 1970 136 13.6

650 1200 1545 107 10.7

PART NUMBER

EXAMPLE

SSV11/S/SW14-OD

316ss - 14mm dia socket weld inlet & outlet

SSV11/S/SW14-OD-IN / SW16-OD-OUT 316ss - 14mm dia socket weld inlet & 16mm socket weld outlet

SSV11/S/SW16-OD

316ss -16mm dia socket weld inlet & outlet

SSV11/S/SW18-OD

316ss - 18mm dia socket weld inlet & outlet

SSV11/S/SW20-OD

316ss - 20mm dia socket weld inlet & outlet

SSV11/S/SW28-OD

316ss - 28mm dia socket weld inlet & outlet

Also available in 6, 9, 16 and 20mm full flow bore. Other connections available are butt weld, threaded and compression fitting.

PART NUMBER

EXAMPLE

SSV11/S/BW17-OD

316ss - 17mm dia butt weld inlet & outlet

SSV11/S/BW17-OD-IN / BW20-OD-OUT 316ss - 17mm dia butt weld inlet & 20mm butt weld outlet

SSV11/S/BW34-OD

316ss - 34mm dia butt weld inlet & outlet

Also available in 6, 9, 16 and 20mm full flow bore. Other connections available are socket weld, threaded and compression fitting.

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk

Website: www.valves.co.uk or olivervalves.com

DATA SHEET No

SSV11 / 1-04

page 5

Parkgate Industrial Estate Knutsford Cheshire WA16 8DX England

Tel: 0044 (0)1565 632636 Fax: 0044 (0)1565 654089 Email: sales@valves.co.uk

Website: www.valves.co.uk or olivervalves.com

DATA SHEET No

SSV11 / BW / 1-04

page 6

More magazines by this user
Similar magazines