MSDS - Leader Pumps
MSDS - Leader Pumps
MSDS - Leader Pumps
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Product Name<br />
Hazchem Code<br />
TRIPLE 7 ENVIROCLEAR<br />
None Allocated<br />
6. ACCIDENTAL RELEASE MEASURES<br />
Spillage<br />
If spilt (bulk), flush to drains. Use personal protective equipment. CAUTION: Spill site may be slippery.<br />
7. STORAGE AND HANDLING<br />
Storage<br />
Handling<br />
Store in cool, dry, well ventilated area, removed from oxidising agents, acids, bleach, caustic drain cleaners and<br />
foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in<br />
use.<br />
Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin<br />
contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating,<br />
drinking and smoking in contaminated areas.<br />
8. EXPOSURE CONTROLS/ PERSONAL PROTECTION<br />
Exposure Stds<br />
No exposure standard(s) allocated.<br />
Biological Limits<br />
Engineering<br />
Controls<br />
PPE<br />
No biological limit allocated.<br />
Avoid inhalation. Use in well ventilated areas.<br />
Wear splash-proof goggles. Individuals with sensitive skin should consider wearing: rubber or PVC gloves.<br />
9. PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance AMBER COLOURED LIQUID Solubility (Water) SOLUBLE<br />
Odour SLIGHT SURFACTANT ODOUR Specific Gravity 1.01<br />
pH 10.2 - 10.5 % Volatiles > 60 %<br />
Vapour Pressure 18 mm Hg @ 20°C Flammability NON FLAMMABLE<br />
Vapour Density NOT AVAILABLE Flash Point NOT RELEVANT<br />
Boiling Point 100°C Upper Explosion Limit NOT RELEVANT<br />
Melting Point 0°C (Approximately) Lower Explosion Limit NOT RELEVANT<br />
Evaporation Rate<br />
AS FOR WATER<br />
10. STABILITY AND REACTIVITY<br />
Chemical Stability<br />
Stable under recommended conditions of storage.<br />
Conditions to Avoid<br />
Avoid heat, sparks, open flames and other ignition sources.<br />
Material to Avoid<br />
Hazardous<br />
Decomposition Products<br />
Hazardous Reactions<br />
Health Hazard<br />
Summary<br />
Eye<br />
Inhalation<br />
Skin<br />
Incompatible with oxidising agents (eg. hypochlorites), acids (eg. nitric acid), bleach and caustic drain<br />
cleaners.<br />
Not expected to evolve toxic gases during normal use due to the high decomposition temperature.<br />
Polymerization is not expected to occur.<br />
11. TOXICOLOGICAL INFORMATION<br />
Ingestion<br />
Low toxicity - low irritant. Adverse health effects are not anticipated with normal use.<br />
Irritant. Contact may result in irritation, lacrimation, pain and redness.<br />
Low irritant. Due to the low vapour pressure, an inhalation hazard is not anticipated with normal use.<br />
Low irritant. Prolonged or repeated contact may result in mild irritation, rash and dermatitis.<br />
Low toxicity.<br />
Page 2 of 4<br />
RMT<br />
Reviewed: 03 Jan 2007<br />
Printed: 17 Jun 2009