unidrain® New standard in floor drains - Tengi
unidrain® New standard in floor drains - Tengi
unidrain® New standard in floor drains - Tengi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
unidra<strong>in</strong> ®<br />
<strong>New</strong> <strong>standard</strong> <strong>in</strong> <strong>floor</strong> dra<strong>in</strong>s<br />
International<br />
February 2006
Unidra<strong>in</strong> sets a new <strong>standard</strong> <strong>in</strong> <strong>floor</strong> dra<strong>in</strong>s<br />
Provid<strong>in</strong>g easier implementation, better build<strong>in</strong>g quality - and a completely new design!<br />
Ingenious <strong>in</strong>novation<br />
– so simple<br />
It is no secret that fl oor dra<strong>in</strong>s are<br />
best <strong>in</strong>stalled <strong>in</strong> a fl oor. Unidra<strong>in</strong> also<br />
knows this, all we have done is to<br />
move it!<br />
In contrast to the traditional fl oor<br />
dra<strong>in</strong>, which must always be placed at<br />
a distance from the walls, <strong>in</strong> pr<strong>in</strong>ciple<br />
<strong>in</strong> the middle of the fl oor, Unidra<strong>in</strong> is<br />
placed directly aga<strong>in</strong>st the wall.<br />
With this simple manoeuvre, Unidra<strong>in</strong><br />
solves by and large all the well-known<br />
problems relat<strong>in</strong>g to fl oor dra<strong>in</strong>s, while<br />
at the same time provid<strong>in</strong>g additional<br />
benefi ts to boot.<br />
In technical terms, the solution is just<br />
as simple as it is <strong>in</strong>genious.<br />
In pr<strong>in</strong>ciple all we have done is to<br />
supply the fl oor dra<strong>in</strong> with vertical<br />
wall fl anges, which then form a<br />
waterproof <strong>in</strong>terface to the wall<br />
as well as simultaneously ensur<strong>in</strong>g<br />
precise and proper fasten<strong>in</strong>g dur<strong>in</strong>g<br />
the entire construction process.<br />
<strong>New</strong> <strong>standard</strong> with many benefits<br />
Unidra<strong>in</strong> sets a new <strong>standard</strong> <strong>in</strong> fl oor<br />
dra<strong>in</strong>s of the future with palpable<br />
benefi ts <strong>in</strong> a large number of areas:<br />
• Waterproof <strong>in</strong>terface to wall<br />
• Reliable and precise fasten<strong>in</strong>g<br />
• S<strong>in</strong>gle-sided fl oor slope<br />
• Flat substrate for tiles<br />
• No cutt<strong>in</strong>g of tiles<br />
• Easier and more reliable<br />
<strong>in</strong>stallation<br />
• Faster construction process<br />
• Fewer construction defects<br />
• Better build<strong>in</strong>g quality<br />
• <strong>New</strong> stylishly pure design<br />
Close co-operation with<br />
DTI and SBi<br />
Unidra<strong>in</strong> was developed <strong>in</strong> close<br />
co-operation with the Danish construction<br />
<strong>in</strong>dustry’s lead<strong>in</strong>g research<br />
authorities, the Danish Technological<br />
Institute and SBi.<br />
Comprehensive tests and trials<br />
document Unidra<strong>in</strong>’s superior properties<br />
and conclude that Unidra<strong>in</strong> is<br />
superior to the traditional fl oor dra<strong>in</strong><br />
with respect to construction method,<br />
build<strong>in</strong>g quality and function.<br />
High quality <strong>in</strong> sta<strong>in</strong>less steel<br />
Unidra<strong>in</strong> is produced <strong>in</strong> high-quality<br />
sta<strong>in</strong>less steel (AISI 304). This ensures<br />
optimum strength, great resistance<br />
to corrosion and unsurpassed ease<br />
of clean<strong>in</strong>g characteristics.<br />
Comprehensive quality assurance<br />
system <strong>in</strong> the advanced high-technology<br />
production process ensures<br />
parts hav<strong>in</strong>g cont<strong>in</strong>ually high quality<br />
and a uniform fi nish.<br />
Developed by architects<br />
Unidra<strong>in</strong> was developed by architects<br />
and implemented <strong>in</strong> a modern,<br />
stylishly pure design with strict demands<br />
posed for quality, aesthetics<br />
and functionality.<br />
3<br />
Unidra<strong>in</strong>’s <strong>in</strong>novation <strong>in</strong> design and<br />
function will change the status of fl oor<br />
dra<strong>in</strong>s from simply be<strong>in</strong>g a hole <strong>in</strong><br />
the fl oor to becom<strong>in</strong>g a new design<br />
element <strong>in</strong> modern build<strong>in</strong>g science.<br />
Unidra<strong>in</strong> has received Danish<br />
VA approval<br />
Unidra<strong>in</strong> complies with all applicable<br />
norms for dra<strong>in</strong>age systems, <strong>in</strong>clud<strong>in</strong>g<br />
the EN 1253 common European <strong>standard</strong><br />
and has of course been approved<br />
by Danish Hous<strong>in</strong>g M<strong>in</strong>istry’s<br />
Validation Committee for Water and<br />
Dra<strong>in</strong>age Materials [”VA” approval].<br />
We give priority to service<br />
and support<br />
We desire to be your professional<br />
sparr<strong>in</strong>g partner and support system,<br />
hence we give service and support<br />
a very high priority. We are always<br />
ready to come out and meet with<br />
you, whether it <strong>in</strong>volves technical<br />
consult<strong>in</strong>g <strong>in</strong> connection with specifi c<br />
build<strong>in</strong>gs, ideas for a tangible project<br />
or perhaps just some good advice to<br />
assist you <strong>in</strong> your work.<br />
We would be pleased to hear from<br />
you!<br />
S<strong>in</strong>cerely<br />
Unidra<strong>in</strong> A/S
Wall membrane<br />
Wall fl ange<br />
Grat<strong>in</strong>g<br />
Frame<br />
Floor fl ange<br />
Govern<strong>in</strong>g Pr<strong>in</strong>ciples<br />
Floor membrane<br />
C<br />
Membrane overlaps wall fl ange<br />
Guaranteed secure wet room cover<strong>in</strong>g aga<strong>in</strong>st wall<br />
The Unidra<strong>in</strong> fl oordra<strong>in</strong> system is placed directly aga<strong>in</strong>st the wall, where<br />
the vertical wall fl anges ensure a waterproof overlap with the wall surface<br />
membranes and tile cover<strong>in</strong>g.<br />
The horizontal fl oor fl anges ensure a seal aga<strong>in</strong>st the surface of the fl oor <strong>in</strong> a<br />
correspond<strong>in</strong>g manner via an overlapp<strong>in</strong>g fl oor membrane and tile cover<strong>in</strong>g.<br />
This causes Unidra<strong>in</strong> to create a wet room that has been waterproofed<br />
aga<strong>in</strong>st both its wall and fl oor surfaces – and we guarantee it!<br />
Wall membrane<br />
Wall tile<br />
Tile mortar<br />
Wall fl ange<br />
Fasten<strong>in</strong>g<br />
Grat<strong>in</strong>g<br />
Frame<br />
Floor tile<br />
Tile mortar<br />
Stra<strong>in</strong>er<br />
Dra<strong>in</strong> unit<br />
Floor fl ange<br />
Floor membrane<br />
Water trap<br />
Outlet unit<br />
4
Construction method<br />
Easier and more reliable implementation<br />
provides better build<strong>in</strong>g quality<br />
Precise and secure fasten<strong>in</strong>g<br />
The cover<strong>in</strong>g and fasten<strong>in</strong>g of the dra<strong>in</strong> unit aga<strong>in</strong>st one or more walls<br />
provides a large number of benefi ts, both <strong>in</strong> the construction process as<br />
well as <strong>in</strong> functional terms.<br />
One of the obvious benefi ts is a s<strong>in</strong>gle-sided slope, which eases the<br />
implementation of a proper base while also provid<strong>in</strong>g a completely fl at<br />
substrate for the til<strong>in</strong>g. This enables the possibility for large tiles to be laid<br />
without mistakes.<br />
Simple and precise mount<strong>in</strong>g and fasten<strong>in</strong>g<br />
Simple and easy mount<strong>in</strong>g with the possibility of precision<br />
fasten<strong>in</strong>g ensures correct placement dur<strong>in</strong>g the entire<br />
course of the construction.<br />
Proper clamp<strong>in</strong>g dur<strong>in</strong>g cast<strong>in</strong>g<br />
The dra<strong>in</strong> unit is held fi rmly <strong>in</strong> place dur<strong>in</strong>g the entire<br />
pour<strong>in</strong>g process, and hence does not dislocate.<br />
The placement aga<strong>in</strong>st the wall, away from the work<br />
location, eases the adaptation of re<strong>in</strong>forcement and fl oor<br />
heat<strong>in</strong>g.<br />
Simple implementation of base with s<strong>in</strong>gle-sided slope<br />
S<strong>in</strong>gle-sided slope eases the implementation of a proper<br />
base without any risks of back slop<strong>in</strong>g or depressions.<br />
The substrate for lay<strong>in</strong>g the tiles is completely smooth and<br />
fl at, enabl<strong>in</strong>g error free lay<strong>in</strong>g of large tiles.<br />
Wet room ensured sealed <strong>in</strong>terfaces aga<strong>in</strong>st wall and <strong>floor</strong><br />
The overlap of the membrane with the fl oor and wall<br />
fl anges of the dra<strong>in</strong> unit creates a wet room with an ensured<br />
seal at the <strong>in</strong>terfaces to both the fl oor and the wall.<br />
Interior corners need not be sealed.<br />
Easy mount<strong>in</strong>g of tiles on completely flat substrate<br />
The completely fl at substrate makes the mount<strong>in</strong>g of tiles<br />
easy – even with very large tiles or slabs.<br />
No cutt<strong>in</strong>g of the tiles around the dra<strong>in</strong>.<br />
5
(5) Stra<strong>in</strong>er (hidden)<br />
(4) Grat<strong>in</strong>g<br />
(1) Dra<strong>in</strong> unit (3) Frame<br />
Configuration<br />
(2) Outlet unit<br />
More than 2000 possible comb<strong>in</strong>ations<br />
2000 corner system<br />
A complete Unidra<strong>in</strong> fl oor dra<strong>in</strong> system consists of 5 separate basic<br />
components, which can all be supplied <strong>in</strong> a large number of types/variants,<br />
depend<strong>in</strong>g upon the type and <strong>in</strong>terior of the build<strong>in</strong>g.<br />
In total, this gives more than 2000 different possible comb<strong>in</strong>ations!<br />
This ensures that the Unidra<strong>in</strong> fl oor dra<strong>in</strong> system advantageously resolves just<br />
about any fl oor dra<strong>in</strong> design requirement.<br />
The follow<strong>in</strong>g 5 components are <strong>in</strong>cluded <strong>in</strong> a complete Unidra<strong>in</strong> <strong>floor</strong><br />
dra<strong>in</strong>age system:<br />
(1) Dra<strong>in</strong> unit – 18 types/variants<br />
Sta<strong>in</strong>less steel with one or more wall fl anges.<br />
Selection of model type is determ<strong>in</strong>ed by the placement of the dra<strong>in</strong> unit<br />
<strong>in</strong> relation to the walls.<br />
(2) Outlet unit – 12 types/variants<br />
Injection-moulded plastic (PP) with <strong>in</strong>-built detachable water trap.<br />
Available with vertical or horizontal discharge with/without side <strong>in</strong>let.<br />
All variants fi t with all dra<strong>in</strong> units, irrespective of length and variant.<br />
(3) Frame – 54 types/variants<br />
Brushed sta<strong>in</strong>less steel. Available <strong>in</strong> heights of 8/10/12 mm.<br />
Frame type is determ<strong>in</strong>ed by the type/length of the dra<strong>in</strong> unit and the<br />
thickness of the fl oor tiles.<br />
(4) Grat<strong>in</strong>g – 26 types/variants<br />
3 mm brushed sta<strong>in</strong>less steel. Choose between 4 modern stylishly pure<br />
designs.<br />
The length must correspond to the dra<strong>in</strong> unit/frame length<br />
(5) Stra<strong>in</strong>er<br />
Stra<strong>in</strong>er<br />
Brushed sta<strong>in</strong>less steel.<br />
Practical accessory that helps prevent clogg<strong>in</strong>g of the water trap.<br />
6
1001 dra<strong>in</strong> unit<br />
Dra<strong>in</strong> unit for shower stall with 3 walls<br />
With 3 wall fl anges and one fl oor fl ange for placement <strong>in</strong> a shower stall<br />
aga<strong>in</strong>st the rear wall and 2 fi xed side walls.<br />
Produced <strong>in</strong> heavy-duty 1.5 mm sta<strong>in</strong>less steel with a pickled surface fi nish.<br />
(H) = Distance from top edge of outlet unit to<br />
top side of fl oor fl ange/bottom side of tiles.<br />
Total overall height (excl. frame/grat<strong>in</strong>g) =<br />
(H) + height of outlet unit.<br />
Specifications<br />
Type of build<strong>in</strong>g: Residential Wall fl anges: Rear wall/left/right<br />
Application: Shower stall, etc. Material: Sta<strong>in</strong>less steel (AISI 304)<br />
Floor structure: Concrete/light Gauge: 1.5 mm<br />
Membrane: Lubrication membrane Surface: Pickled<br />
Floor cover<strong>in</strong>g: Stone/tiles Associated frame: 1501<br />
Product range<br />
Length model Length (L) Frame (R) Centre (C) Height (H) Item No. EAN No.<br />
700 mm 700 mm 696 mm 350 mm 17 mm 1001.0700 5707692001210<br />
800 mm 800 mm 796 mm 400 mm 18 mm 1001.0800 5707692001227<br />
900 mm 900 mm 896 mm 450 mm 19 mm 1001.0900 5707692001234<br />
1000 mm 1000 mm 996 mm 500 mm 20 mm 1001.1000 5707692001241<br />
7
1002 dra<strong>in</strong> unit<br />
Dra<strong>in</strong> unit for shower stall with 2 walls (L)<br />
With 2 wall fl anges and 2 fl oor fl anges for placement <strong>in</strong> shower stall aga<strong>in</strong>st<br />
rear wall and left side wall. Right side open or with glass.<br />
Produced <strong>in</strong> heavy-duty 1.5 mm sta<strong>in</strong>less steel with a pickled surface fi nish.<br />
(H) = Distance from top edge of outlet unit<br />
to top side of fl oor fl ange/bottom side of tiles.<br />
Total overall height (excl. frame/grat<strong>in</strong>g) =<br />
(H) + height of outlet unit.<br />
Specifications<br />
Type of build<strong>in</strong>g: Residential Wall fl anges: Rear wall/left<br />
Application: Shower stall Material: Sta<strong>in</strong>less steel (AISI 304)<br />
Floor structure: Concrete/light Gauge: 1.5 mm<br />
Membrane: Lubrication membrane Surface: Pickled<br />
Floor cover<strong>in</strong>g: Stone/tiles Associated frame: 1502<br />
Product range<br />
Length model Length (L) Frame (R) Centre (C) Height (H) Item No. EAN No.<br />
700 mm 750 mm 688 mm 350 mm 17 mm 1002.0700 5707692001272<br />
800 mm 850 mm 788 mm 400 mm 18 mm 1002.0800 5707692001289<br />
900 mm 950 mm 888 mm 450 mm 19 mm 1002.0900 5707692001296<br />
1000 mm 1050 mm 988 mm 500 mm 20 mm 1002.1000 5707692001302<br />
8
1003 dra<strong>in</strong> unit<br />
Dra<strong>in</strong> unit for shower stall with 2 walls (R)<br />
With 2 wall fl anges and 2 fl oor fl anges for placement <strong>in</strong> shower stall aga<strong>in</strong>st<br />
rear wall and right side wall. Left side open or with glass.<br />
Produced <strong>in</strong> heavy-duty 1.5 mm sta<strong>in</strong>less steel with a pickled surface fi nish.<br />
(H) = Distance from top edge of outlet unit<br />
to top side of fl oor fl ange/bottom side of tiles.<br />
Total overall height (excl. frame/grat<strong>in</strong>g) =<br />
(H) + height of outlet unit.<br />
Specifications<br />
Type of build<strong>in</strong>g: Residential Wall fl anges: Rear wall/right<br />
Application: Shower stall Material: Sta<strong>in</strong>less steel (AISI 304)<br />
Floor structure: Concrete/light Gauge: 1.5 mm<br />
Membrane: Lubrication membrane Surface: Pickled<br />
Floor cover<strong>in</strong>g: Stone/tiles Associated frame: 1503<br />
Product range<br />
Length model Length (L) Frame (R) Centre (C) Height (H) Item No. EAN No.<br />
700 mm 750 mm 688 mm 350 mm 17 mm 1003.0700 5707692001333<br />
800 mm 850 mm 788 mm 400 mm 18 mm 1003.0800 5707692001340<br />
900 mm 950 mm 888 mm 450 mm 19 mm 1003.0900 5707692001357<br />
1000 mm 1050 mm 988 mm 500 mm 20 mm 1003.1000 5707692001364<br />
9
1004 dra<strong>in</strong> unit<br />
Dra<strong>in</strong> unit for shower stall or bathroom<br />
With 1 wall fl ange and 3 fl oor fl anges for free placement aga<strong>in</strong>st rear wall<br />
<strong>in</strong>dependently of possible side wall placement.<br />
Well-suited for open bathrooms without side walls and <strong>in</strong> exist<strong>in</strong>g shower stalls<br />
with ”crooked” dimensions.<br />
Produced <strong>in</strong> heavy-duty 1.5 mm sta<strong>in</strong>less steel with a pickled surface fi nish.<br />
(H) = Distance from top edge of outlet unit<br />
to top side of fl oor fl ange/bottom side of tiles.<br />
Total overall height (excl. frame/grat<strong>in</strong>g) =<br />
(H) + height of outlet unit.<br />
Specifications<br />
Type of build<strong>in</strong>g: Residential Wall fl anges: Rear wall<br />
Application: Shower stall Material: Sta<strong>in</strong>less steel (AISI 304)<br />
Floor structure: Concrete/light Gauge: 1.5 mm<br />
Membrane: Lubrication membrane Surface: Pickled<br />
Floor cover<strong>in</strong>g: Stone/tiles Associated frame: 1504<br />
Product range<br />
Length model Length (L) Frame (R) Centre (C) Height (H) Item No. EAN No.<br />
700 mm 800 mm 680 mm 400 mm 17 mm 1004.0700 5707692001395<br />
800 mm 900 mm 780 mm 450 mm 18 mm 1004.0800 5707692001401<br />
900 mm 1000 mm 880 mm 500 mm 19 mm 1004.0900 5707692001418<br />
1000 mm 1100 mm 980 mm 550 mm 20 mm 1004.1000 5707692001425<br />
10
1005 dra<strong>in</strong> unit<br />
Dra<strong>in</strong> unit for free placement aga<strong>in</strong>st wall<br />
With 1 wall fl ange and 3 fl oor fl anges for free placement aga<strong>in</strong>st rear wall.<br />
Used as normal fl oor dra<strong>in</strong> or <strong>in</strong> shower stalls.<br />
Produced <strong>in</strong> heavy-duty 1.5 mm sta<strong>in</strong>less steel with a pickled surface fi nish.<br />
(H) = Distance from top edge of outlet unit<br />
to top side of fl oor fl ange/bottom side of tiles.<br />
Total overall height (excl. frame/grat<strong>in</strong>g) =<br />
(H) + height of outlet unit.<br />
Specifications<br />
Type of build<strong>in</strong>g: Residential Wall fl anges: Rear wall<br />
Application: Shower stall Material: Sta<strong>in</strong>less steel (AISI 304)<br />
Floor structure: Concrete/light Gauge: 1.5 mm<br />
Membrane: Lubrication membrane Surface: Pickled<br />
Floor cover<strong>in</strong>g: Stone/tiles Associated frame: 1505<br />
Product range<br />
Length model Length (L) Frame (R) Centre (C) Height (H) Item No. EAN No.<br />
300 mm 419 mm 299 mm 209 mm 12 mm 1005.0300 5707692001456<br />
11
1100 modular system<br />
Modularly constructed system for larger bathrooms<br />
The Unidra<strong>in</strong> modular system is an elegant fl oor dra<strong>in</strong> set aga<strong>in</strong>st the wall <strong>in</strong><br />
lengths of over 1 metre.<br />
The system is based upon 5 types of dra<strong>in</strong>s <strong>in</strong> fi xed modular dimensions that<br />
are delivered welded and surface-treated <strong>in</strong> customised lengths.<br />
1101<br />
Intermediate module with rear fl ange and<br />
without side fl anges.<br />
1102<br />
Left end module with rear fl ange and vertical<br />
end fl ange.<br />
1103<br />
Right end module with rear fl ange and vertical<br />
end fl ange.<br />
1104<br />
Left end module with rear fl ange and horizontal<br />
end fl ange.<br />
1105<br />
Right end module with rear fl ange and horizontal<br />
end fl ange.<br />
M<strong>in</strong>imum length 1400 mm. Subsequently <strong>in</strong> lengths of 100 mm <strong>in</strong>crements based upon the<br />
module dimensions shown below.<br />
Each dra<strong>in</strong> unit has a centre discharge, which fi ts with outlet unit type 1300 and 1400.<br />
Grat<strong>in</strong>gs and frames are <strong>standard</strong> from the general product l<strong>in</strong>e.<br />
Mount<strong>in</strong>g and technical specifi cations are as per the general Unidra<strong>in</strong> fl oor dra<strong>in</strong>age system.<br />
Specifications<br />
Dra<strong>in</strong> unit Length module Length Frame type Frame length Item No.<br />
1101<br />
1102<br />
1103<br />
1104<br />
1105<br />
700 mm 680 680 mm 1101.0700<br />
800 mm 780<br />
780 mm 1101.0800<br />
900 mm 880<br />
1504<br />
880 mm 1101.0900<br />
1000 mm 980 980 mm 1101.1000<br />
700 mm 690 688 mm 1102.0700<br />
800 mm 790<br />
788 mm 1102.0800<br />
900 mm 890<br />
1502<br />
888 mm 1102.0900<br />
1000 mm 990 988 mm 1102.1000<br />
700 mm 690 688 mm 1103.0700<br />
800 mm 790<br />
788 mm 1103.0800<br />
900 mm 890<br />
1503<br />
888 mm 1103.0900<br />
1000 mm 990 988 mm 1103.1000<br />
700 mm 740 680 mm 1104.0700<br />
800 mm 840<br />
780 mm 1104.0800<br />
900 mm 940<br />
1504<br />
880 mm 1104.0900<br />
1000 mm 1040 980 mm 1104.1000<br />
700 mm 740 680 mm 1105.0700<br />
800 mm 840<br />
780 mm 1105.0800<br />
900 mm 940<br />
1504<br />
880 mm 1105.0900<br />
1000 mm 1040 980 mm 1105.1000<br />
12
1301 outlet unit<br />
Outlet unit with horizontal discharge without<br />
water trap<br />
Low outlet unit with horizontal discharge ø32 mm without water trap.<br />
Total overall height (excl. frame/grat<strong>in</strong>g) = Height outlet unit + (H)<br />
(H) = Distance from top edge of outlet unit to top side of fl oor fl ange/bottom side of tiles.<br />
(See dimension spec. for the selected dra<strong>in</strong> unit).<br />
Specifications<br />
Outlet dimension: ø32 mm Capacity: > 0.4 l/s<br />
Outlet direction: Vertical Material: Plastic (PP)<br />
Water trap: Without Seal: EPDM<br />
Side <strong>in</strong>let: Without Fits with dra<strong>in</strong> units: 1001/1002/1003/1004/1005<br />
Product range<br />
Discharge dim. Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø32 mm Horizontal Without Without 1301.0032 5707692002521<br />
13
1401 outlet unit<br />
Outlet unit with water trap and horizontal discharge<br />
Horizontal discharge <strong>in</strong> ø50 mm or ø75 mm with built-<strong>in</strong> detachable/<br />
separable water trap with large self-clean<strong>in</strong>g effect.<br />
With a need for a discharge fac<strong>in</strong>g backwards the hous<strong>in</strong>g can be<br />
turned 180º.<br />
Available soon <strong>in</strong> lower version.<br />
Total overall height (excl. frame/grat<strong>in</strong>g) = Height outlet unit + (H)<br />
(H) = Distance from top edge of outlet unit to top side of fl oor fl ange/bottom side of tiles.<br />
(See dimension spec. for the selected dra<strong>in</strong> unit).<br />
Specifications<br />
Outlet dimension: ø50/75 mm Capacity: > 0.8 l/s<br />
Outlet direction: Horizontal Material: Plastic (PP)<br />
Water trap: Detachable/separable Seals: EPDM<br />
Side <strong>in</strong>let: Without Fits with dra<strong>in</strong> unit: 1001/1002/1003/1004/1005<br />
Product range<br />
Discharge dim. Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø 50 mm Horizontal Yes Without 1401.0050 5707692001463<br />
ø 75 mm Horizontal Yes Without 1401.0075 5707692001470<br />
14
1402 outlet unit<br />
Outlet unit with water trap and vertical discharge<br />
Vertical discharge ø75 mm with detachable/separable water trap with large<br />
self-clean<strong>in</strong>g effect.<br />
Total overall height (excl. frame/grat<strong>in</strong>g) = Height outlet unit + (H)<br />
(H) = Distance from top edge of outlet unit to top side of fl oor fl ange/bottom side of tiles.<br />
(See dimension spec. for the selected dra<strong>in</strong> unit).<br />
Specifications<br />
Outlet dimension: ø75 mm Capacity: > 0.8 l/s<br />
Outlet direction: Vertical Material: Plastic (PP)<br />
Water trap: Detachable/separable Seals: EPDM<br />
Side <strong>in</strong>let: Without Fits with dra<strong>in</strong> units: 1001/1002/1003/1004/1005<br />
Product range<br />
Discharge dim. Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø 75 mm Vertical Yes Without 1402.0075 5707692002484<br />
15
1403 outlet unit<br />
Outlet unit with water trap and horizontal discharge,<br />
side <strong>in</strong>let<br />
Horizontal discharge ø75 mm with 2 ø40 mm side <strong>in</strong>let and<br />
detachable/separable water trap with large self-clean<strong>in</strong>g effect.<br />
With a need for a discharge fac<strong>in</strong>g backwards the outlet unit can be<br />
turned 180º.<br />
Total overall height (excl. frame/grat<strong>in</strong>g) = Height outlet unit + (H)<br />
(H) = Distance from top edge of outlet unit to top side of fl oor fl ange/bottom side of tiles.<br />
(See dimension spec. for the selected dra<strong>in</strong> unit).<br />
Specifications<br />
Outlet dimension: ø75 mm Capacity: >1.4 l/s<br />
Outlet direction: Horizontal Material: Plastic (PP)<br />
Water trap: Detachable/separable Seals: EPDM<br />
Side <strong>in</strong>let: 2 ø40 mm Fits with dra<strong>in</strong> units: 1001/1002/1003/1004/1005<br />
Product range<br />
Discharge dim. Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø 75 mm Horizontal Yes 2 ø40 mm 1403.0075 5707692002507<br />
16
1404 outlet unit<br />
Outlet unit with water trap and vertical discharge,<br />
side <strong>in</strong>let<br />
Vertical discharge ø75 mm with 2 ø40 mm side <strong>in</strong>let and detachable/<br />
separable water trap with large self-clean<strong>in</strong>g effect.<br />
Total overall height (excl. frame/grat<strong>in</strong>g) = Height outlet unit + (H)<br />
(H) = Distance from top edge of outlet unit to top side of fl oor fl ange/bottom side of tiles.<br />
(See dimension spec. for the selected dra<strong>in</strong> unit).<br />
Specifications<br />
Outlet dimension: ø75 mm Capacity: > 1.4 l/s<br />
Outlet direction: Vertical Material: Plastic (PP)<br />
Water trap: Detachable/separable Seals: EPDM<br />
Side <strong>in</strong>let: 2 ø40 mm Fits with: 1001, 1002, 1003, 1004, 1005<br />
Product range<br />
Discharge dim. Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø 75 mm Vertical Yes 2 ø40 mm 1404.0075 5707692002514<br />
17
Frames<br />
Frames <strong>in</strong> brushed sta<strong>in</strong>less steel<br />
Frame type and length are determ<strong>in</strong>ed by the type/length of the selected<br />
dra<strong>in</strong> unit.<br />
1505 Frame for 1005 dra<strong>in</strong> unit<br />
Delivered <strong>in</strong> heights of 8, 10 and 12 mm depend<strong>in</strong>g upon the thickness of<br />
the fl oor tile.<br />
Frame height (H) = tile thickness + approx. 2 mm<br />
for tile adhesive and membrane.<br />
Frame width aga<strong>in</strong>st fl ange (wall)<br />
Frame width aga<strong>in</strong>st fl oor surface<br />
= 18 mm<br />
= 10 mm<br />
Specifications<br />
Material: Sta<strong>in</strong>less steel (AISI 304) Heights (H): 8/10/12 mm<br />
Surface: Brushed Insert: Rubber (EPDM)<br />
Product range<br />
Frame type<br />
Length Height 8 mm (H) Height 10 mm (H) Height 12 mm (H)<br />
model (L) Item No. EAN No. Item No. EAN No. Item No. EAN No.<br />
1501<br />
(for dra<strong>in</strong> unit 1001)<br />
700 mm 696 mm 1501.0708 5707692001487 1501.0710 57076920011494 1501.0712 5707692001500<br />
800 mm 796 mm 1501.0808 5707692001517 1501.0810 5707692001524 1501.0812 5707692001531<br />
900 mm 896 mm 1501.0908 5707692001548 1501.0910 5707692001555 1501.0912 5707692001562<br />
1000 mm 996 mm 1501.1008 5707692001579 1501.1010 5707692001586 1501.1012 5707692001593<br />
1502<br />
(for dra<strong>in</strong> unit 1002)<br />
700 mm 688 mm 1502.0708 5707692001661 1502.0710 5707692001678 1502.0712 5707692001685<br />
800 mm 788 mm 1502.0808 57076920011692 1502.0810 5707692001708 1502.0812 5707692001715<br />
900 mm 888 mm 1502.0908 5707692001722 1502.0910 5707692001739 1502.0912 5707692001746<br />
1000 mm 988 mm 1502.1008 5707692001753 1502.1010 5707692001760 1502.1012 5707692001777<br />
1503<br />
(for dra<strong>in</strong> unit 1003)<br />
700 mm 688 mm 1503.0708 5707692001845 1503.0710 5707692001852 1503.0712 5707692001869<br />
800 mm 788 mm 1503.0808 5707692001876 1503.0810 5707692001883 1503.0812 5707692001890<br />
900 mm 888 mm 1503.0908 5707692001906 1503.0910 5707692001913 1503.0912 5707692001920<br />
1000 mm 988 mm 1503.1008 5707692001937 1503.1010 5707692001944 1503.1012 5707692001951<br />
1504<br />
(for dra<strong>in</strong> unit 1004)<br />
1505<br />
(for dra<strong>in</strong> unit 1005)<br />
700 mm 680 mm 1504.0708 5707692002026 1504.0710 5707692002033 1504.0712 5707692002040<br />
800 mm 780 mm 1504.0808 5707692002057 1504.0810 5707692002064 1504.0812 5707692002071<br />
900 mm 880 mm 1504.0908 5707692002088 1504.0910 5707692002095 1504.0912 5707692002101<br />
1000 mm 980 mm 1504.1008 5707692002118 1504.1010 5707692002125 1504.1012 5707692002132<br />
300 mm 299 mm 1505.0308 5707692002200 1505.0310 5707692002217 1505.0312 5707692002224<br />
18
Grat<strong>in</strong>gs<br />
Modern streaml<strong>in</strong>ed grat<strong>in</strong>g design <strong>in</strong> brushed<br />
sta<strong>in</strong>less steel<br />
1005 Standard with Inca design<br />
Choose between 4 unique grat<strong>in</strong>g designs <strong>in</strong> 3 mm solid sta<strong>in</strong>less steel with<br />
handsome brushed surface fi nish.<br />
Specifications<br />
Material: Sta<strong>in</strong>less steel (AISI 304) Width: 51 mm<br />
Gauge: 3 mm solid Surface: Brushed<br />
Product range<br />
Design Length Dim. (L) Item No. EAN No.<br />
Classic<br />
Column<br />
Inca<br />
Square<br />
300 mm 280 mm 1601.0300 5707692002231<br />
300 mm ø35 mm pipe hole 280 mm 1601.0301 5707692002248<br />
700 mm 660 mm 1601.0700 5707692001098<br />
800 mm 760 mm 1601.0800 5707692001104<br />
900 mm 860 mm 1601.0900 5707692001111<br />
1000 mm 960 mm 1601.1000 5707692002255<br />
300 mm 280 mm 1602.0300 5707692002286<br />
300 mm ø35 mm pipe hole 280 mm 1602.0301 5707692002293<br />
700 mm 660 mm 1602.0700 5707692001128<br />
800 mm 760 mm 1602.0800 5707692001135<br />
900 mm 860 mm 1602.0900 5707692001142<br />
1000 mm 960 mm 1602.1000 5707692002309<br />
300 mm 280 mm 1603.0300 5707692002330<br />
300 mm ø35 mm pipe hole 280 mm 1603.0301 5707692002347<br />
700 mm 660 mm 1603.0700 5707692001159<br />
800 mm 760 mm 1603.0800 5707692001166<br />
900 mm 860 mm 1603.0900 5707692001173<br />
1000 mm 960 mm 1603.1000 5707692002354<br />
300 mm 280 mm 1604.0300 5707692002385<br />
300 mm ø35 mm pipe hole 280 mm 1604.0301 5707692002392<br />
700 mm 660 mm 1604.0700 5707692001180<br />
800 mm 760 mm 1604.0800 5707692001197<br />
900 mm 860 mm 1604.0900 5707692001203<br />
1000 mm 960 mm 1604.1000 5707692002408<br />
19
2001 dra<strong>in</strong> unit<br />
Dra<strong>in</strong> unit for corner placement<br />
With 2 wall fl anges and 1 fl oor fl ange for placement <strong>in</strong> corner.<br />
Produced <strong>in</strong> heavy-duty 1.5 mm sta<strong>in</strong>less steel with a pickled surface fi nish.<br />
INSIDE CORNER<br />
Specifications<br />
Type of build<strong>in</strong>g: Residential Wall fl anges: 2 rear walls<br />
Application: Corner placement Material: Sta<strong>in</strong>less steel (AISI 304)<br />
Floor structure: Concrete/light Gauge: 1.5 mm<br />
Membrane: Lubrication membrane Surface: Pickled<br />
Floor cover<strong>in</strong>g: Stone/tiles Associated frame: 2501<br />
Product range<br />
Length model Side length Overall height Frame dim. Item No. EAN No.<br />
200 mm 267 mm See dim. spec. See page 27 2001.0200 5707692002538<br />
for hous<strong>in</strong>gs<br />
21
2301 outlet unit<br />
Outlet unit with horizontal discharge without<br />
water trap<br />
Low outlet unit with horizontal discharge ø32 mm without water trap.<br />
INSIDE CORNER<br />
Specifications<br />
Outlet dimension: ø 32 mm Capacity: > 0.4 l/s<br />
Outlet direction: Horizontal Material: Plastic (PP)<br />
Water trap: Without Seals: EPDM<br />
Side <strong>in</strong>let: Without Fits with: 2001 corner dra<strong>in</strong> unit<br />
Product range<br />
Discharge dim. Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø 32 mm Horizontal Without Without 2301.0032 5707692002545<br />
22
2401 outlet unit<br />
Outlet unit with water trap and horizontal discharge<br />
Horizontal discharge <strong>in</strong> ø50 mm or ø75 mm with built-<strong>in</strong> detachable/<br />
separable water trap with large self-clean<strong>in</strong>g effect.<br />
INSIDE CORNER<br />
Specifications<br />
Outlet dimension: ø50/75 mm Capacity: > 0.8 l/s<br />
Outlet direction: Horizontal Material: Plastic (PP)<br />
Water trap: Detachable/separable Seals: EPDM<br />
Side <strong>in</strong>let: Without Fits with: 2001 corner dra<strong>in</strong> unit<br />
Product range<br />
Discharge dim. Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø 50 mm Horizontal Yes Without 2401.0050 5707692002552<br />
ø 75 mm Horizontal Yes Without 2401.0075 5707692002569<br />
23
2402 outlet unit<br />
Outlet unit with water trap and vertical discharge<br />
Vertical discharge ø75 mm with built-<strong>in</strong> detachable/separable water trap<br />
with large self-clean<strong>in</strong>g effect.<br />
INSIDE CORNER<br />
Specifications<br />
Outlet dimension: ø75 mm Capacity: > 0.8 l/s<br />
Outlet direction: Vertical Material: Plastic (PP)<br />
Water trap: Detachable/separable Seals: EPDM<br />
Side <strong>in</strong>let: Without Fits with: 2001 corner dra<strong>in</strong> unit<br />
Product range<br />
Discharge dim. Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø 75 mm Vertical Yes Without 2402.0075 5707692002576<br />
24
2403 outlet unit<br />
Outlet unit with water trap, horizontal discharge<br />
and side <strong>in</strong>let<br />
Horizontal discharge ø75 mm with 1 ø40 mm side <strong>in</strong>let and<br />
detachable/separable water trap with large self-clean<strong>in</strong>g effect.<br />
INSIDE CORNER<br />
Specifications<br />
Outlet dimension: ø75 mm Capacity: > 1.4 l/s<br />
Outlet direction: Horizontal Material: Plastic (PP)<br />
Water trap: Detachable/separable Seals: EPDM<br />
Side <strong>in</strong>let: 1 ø40 mm Fits with: 2001 corner dra<strong>in</strong> unit<br />
Product range<br />
Discharge dim. Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø 75 mm Horizontal Yes 1 ø 40 mm 2403.0075 5707692002583<br />
25
2404 outlet unit<br />
Outlet unit with water trap, vertical discharge<br />
and side <strong>in</strong>let<br />
Vertical discharge ø75 mm with 1 ø40 mm side <strong>in</strong>let and detachable/<br />
separable water trap with large self-clean<strong>in</strong>g effect.<br />
INSIDE CORNER<br />
Specifications<br />
Outlet dimension: ø75 mm Capacity: > 1.4 l/s<br />
Outlet direction: Vertical Material: Plastic (PP)<br />
Water trap: Detachable/separable Seals: EPDM<br />
Side <strong>in</strong>let: 1 ø40 mm Fits with: 2001 corner dra<strong>in</strong> unit<br />
Product range<br />
Discharge dim. Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø 75 mm Vertical Yes 1 ø40 mm 2404.0075 5707692002590<br />
26
Frames<br />
Frames <strong>in</strong> brushed sta<strong>in</strong>less steel<br />
Frames <strong>in</strong> sta<strong>in</strong>less steel with brushed surface fi nish.<br />
Delivered <strong>in</strong> heights of 8, 10 and 12 mm depend<strong>in</strong>g upon the tile thickness.<br />
Frame height (H) = tile thickness + approx. 2 mm<br />
for tile adhesive and membrane.<br />
Frame width aga<strong>in</strong>st fl ange (wall)<br />
Frame width aga<strong>in</strong>st fl oor surface<br />
= 18 mm<br />
= 10 mm<br />
Specifications<br />
Material: Sta<strong>in</strong>less steel (AISI 304) Heights (H): 8/10/12 mm<br />
Surface: Brushed Insert: Rubber (EPDM)<br />
Product range<br />
Frame height For dra<strong>in</strong> unit Tile thickness Item No. EAN No.<br />
8 mm 2001 4-6 mm 2501.0208 5707692002606<br />
10 mm 2001 7-9 mm 2501.0210 5707692002613<br />
12 mm 2001 10-12 mm 2501.0212 5707692002620<br />
27
Grat<strong>in</strong>gs<br />
Streaml<strong>in</strong>ed m<strong>in</strong>imalistic grat<strong>in</strong>g design<br />
The grat<strong>in</strong>gs match the general product l<strong>in</strong>e, and with their modest<br />
dimensions fi t <strong>in</strong> with any modern bathroom environment.<br />
3 mm solid sta<strong>in</strong>less steel with brushed surface fi nish.<br />
Classic<br />
Column<br />
Specifications<br />
Material: Sta<strong>in</strong>less steel (AISI 304) Surface: Brushed Gauge: 3 mm solid<br />
Product range<br />
Design Fits with Item No. EAN No.<br />
Column Frame 2501 2602.0200 5707692002668<br />
Classic Frame 2501 2601.0200 5707692002651<br />
28
Inspiration Xxxxx xxxxxx<br />
1001<br />
Aga<strong>in</strong>st side walls<br />
1002<br />
Aga<strong>in</strong>st left wall<br />
Unidra<strong>in</strong>’s unique<br />
design and <strong>in</strong>genious<br />
functionality provides entirely<br />
new possibilities for the<br />
organisation of shower stalls<br />
and bathrooms.<br />
The sketches illustrate<br />
examples of simple<br />
and functional <strong>in</strong>terior<br />
layout of shower stalls<br />
with the Unidra<strong>in</strong> fl oor<br />
dra<strong>in</strong>age system.<br />
1004<br />
Independent of<br />
side walls<br />
1004<br />
Between 2 glass walls<br />
1004<br />
Free aga<strong>in</strong>st wall<br />
1100<br />
Modular system<br />
1005<br />
Diagonally <strong>in</strong> corner<br />
1005<br />
Diagonally <strong>in</strong> corner<br />
1005<br />
In a circle<br />
2001<br />
Corner placement<br />
2001<br />
Corner placement<br />
2001<br />
Corner placement<br />
Blue arrow <strong>in</strong>dicate s<strong>in</strong>gle-sided slope direction of the fl oor<br />
30
1000 l<strong>in</strong>e system<br />
1001 1001 dra<strong>in</strong> unit Frame 8 mm Frame 10 mm Frame 12 mm<br />
Length module Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.<br />
700 mm 1001.0700 5707692001210 1501.0708 5707692001487 1501.0710 5707692001494 1501.0712 5707692001500<br />
800 mm 1001.0800 5707692001227 1501.0808 5707692001517 1501.0810 5707692001524 1501.0812 5707692001531<br />
900 mm 1001.0900 5707692001234 1501.0908 5707692001548 1501.0910 5707692001555 1501.0912 5707692001562<br />
1000 mm 1001.1000 5707692001241 1501.1008 5707692001579 1501.1010 5707692001586 1501.1012 5707692001593<br />
1002 1002 dra<strong>in</strong> unit Frame 8 mm Frame 10 mm Frame 12 mm<br />
Length module Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.<br />
700 mm 1002.0700 5707692001272 1502.0708 5707692001661 1502.0710 5707692001678 1502.0712 5707692001685<br />
800 mm 1002.0800 5707692001289 1502.0808 5707692001692 1502.0810 5707692001708 1502.0812 5707692001715<br />
900 mm 1002.0900 5707692001296 1502.0908 5707692001722 1502.0910 5707692001739 1502.0912 5707692001746<br />
1000 mm 1002.1000 5707692001302 1502.1008 5707692001753 1502.1010 5707692001760 1502.1012 5707692001777<br />
Product overview<br />
1003 1003 dra<strong>in</strong> unit Frame 8 mm Frame 10 mm Frame 12 mm<br />
Length module Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.<br />
700 mm 1003.0700 5707692001333 1503.0708 5707692001845 1503.0710 5707692001852 1503.0712 5707692001869<br />
800 mm 1003.0800 5707692001340 1503.0808 5707692001876 1503.0810 5707692001883 1503.0812 5707692001890<br />
900 mm 1003.0900 5707692001357 1503.0908 5707692001906 1503.0910 5707692001913 1503.0912 5707692001920<br />
1000 mm 1003.1000 5707692001364 1503.1008 5707692001937 1503.1010 5707692001944 1503.1012 5707692001951<br />
1004 1004 dra<strong>in</strong> unit Frame 8 mm Frame 10 mm Frame 12 mm<br />
Xxx xx x xxxx<br />
Length module Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.<br />
700 mm 1004.0700 5707692001395 1504.0708 5707692002026 1504.0710 5707692002033 1504.0712 5707692002040<br />
800 mm 1004.0800 5707692001401 1504.0808 5707692002057 1504.0810 5707692002064 1504.0812 5707692002071<br />
900 mm 1004.0900 5707692001418 1504.0908 5707692002088 1504.0910 5707692002095 1504.0912 5707692002101<br />
1000 mm 1004.1000 5707692001425 1504.1008 5707692002118 1504.1010 5707692002125 1504.1012 5707692002132<br />
1005 1005 dra<strong>in</strong> unit Frame 8 mm Frame 10 mm Frame 12 mm<br />
Length module Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.<br />
300 mm 1005.0300 5707692001456 1505.0308 5707692002200 1505.0310 5707692002217 1505.0312 5707692002224<br />
Grat<strong>in</strong>gs Classic Column Inca Square<br />
Length module Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.<br />
300 mm 1601.0300 5707692002231 1602.0300 5707692002286 1603.0300 5707692002330 1604.0300 5707692002385<br />
300 mm (pipe hole) 1601.0301 5707692002248 1602.0301 5707692002293 1603.0301 5707692002347 1604.0301 5707692002392<br />
700 mm 1601.0700 5707692001098 1602.0700 5707692001128 1603.0700 5707692001159 1604.0700 5707692001180<br />
800 mm 1601.0800 5707692001104 1602.0800 5707692001135 1603.0800 5707692001166 1604.0800 5707692001197<br />
900 mm 1601.0900 5707692001111 1602.0900 5707692001142 1603.0900 5707692001173 1604.0900 5707692001203<br />
1000 mm 1601.1000 5707692002255 1602.1000 5707692002309 1603.1000 5707692002354 1604.1000 5707692002408<br />
Outlet units<br />
Discharge dimension Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø32 mm Horizontal Without Without 1301.0032 5707692002521<br />
ø50 mm Horizontal With Without 1401.0050 5707692001463<br />
ø75 mm Horizontal With Without 1401.0075 5707692001470<br />
ø75 mm Vertical With Without 1402.0075 5707692002484<br />
ø75 mm Horizontal With 2 ø40 1403.0075 5707692002507<br />
ø75 mm Vertical With 2 ø40 1404.0075 5707692002514<br />
Accessory<br />
Item No.<br />
EAN No.<br />
Stra<strong>in</strong>er 1810.0010 5707692002446<br />
1100 modular system<br />
For specifi cations see page 12<br />
2000 corner system<br />
2001 2001 dra<strong>in</strong> unit Frame 8 mm Frame 10 mm Frame 12 mm<br />
Length module Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.<br />
200 mm 2001.0200 5707692002538 2501.0208 5707692002606 2501.0210 5707692002613 2501.0212 5707692002620<br />
Grat<strong>in</strong>gs Classic Column<br />
Length module Item No. EAN No. Item No. EAN No.<br />
200 mm 2601.0200 5707692002651 2602.0200 5707692002668<br />
Facts on Unidra<strong>in</strong><br />
Tested and approved by the<br />
Danish Technological Institute<br />
accord<strong>in</strong>g to the new European<br />
Standard EN 1253 (gullies for<br />
build<strong>in</strong>gs).<br />
Tested and approved by the<br />
Danish Build<strong>in</strong>g Research Institute<br />
- SBi for secure watertight connection<br />
to the walls.<br />
Outlet units<br />
Discharge dimension Direction Water trap Side <strong>in</strong>let Item No. EAN No.<br />
ø32 mm Horizontal Without Without 2301.0032 5707692002545<br />
ø50 mm Horizontal With Without 2401.0050 5707692002552<br />
ø75 mm Horizontal With Without 2401.0075 5707692002569<br />
ø75 mm Vertical With Without 2402.0075 5707692002576<br />
ø75 mm Horizontal With 1 ø40 2403.0075 5707692002583<br />
ø75 mm Vertical With 1 ø40 2404.0075 5707692002590<br />
Accessory<br />
Item No.<br />
EAN No.<br />
Stra<strong>in</strong>er 2810.0010 5707692002675<br />
31
For further technical specifi cations, documentation and<br />
draw<strong>in</strong>gs, etc. please refer to our homepage at www.unidra<strong>in</strong>.com<br />
If you have a need for technical support, good advice or guidance<br />
or if you n eed any other <strong>in</strong>formation, please do not hesitate to give us a r<strong>in</strong>g at<br />
+45 3910 1010 or send an E-mail to: <strong>in</strong>fo@unidra<strong>in</strong>.com<br />
Unidra<strong>in</strong> A/S Farum Gydevej 71 DK-3520 Farum Denmark<br />
T +45 3910 1010 F +45 3910 1020 www.unidra<strong>in</strong>.com<br />
The Unidra<strong>in</strong> ® dra<strong>in</strong>age system is patent pend<strong>in</strong>g <strong>in</strong> over 20 countries/regions of the world. Unidra<strong>in</strong> ® is a registered trademark.