Meinhard Glass Products

Meinhard Glass ProductsMeinhard Torch, Injector, Spray Chamber, and Cone Price ListMeinhard Part # OEM Part # Description30 June 2009AgilentML190005 G182065028 Quartz Torch, 2.5 mm Injector, 4500ML190008 G182065035 Quartz Torch, Demountable, 4500ML190006 G182065229 Quartz Torch, 1.5 mm Injector, 4500ML190009 G183365422 Quartz Torch, Demountable, w/Placement Pin, 7500ML190010 G183365423 Quartz Torch, 2.5 mm Injector, Placement Pin, 7500 - DISCONTINUED see ML190022ML190011 G183365424 Quartz Torch, 1.5 mm Injector, Placement Pin, 7500ML190012 G183365425 Quartz Torch, 1.0 mm Injector, Oils, Placement Pin, 7500ML190022 G182067002 Quartz Torch, 2.5 mm injector, 7500 Series ICP/MS, 2 Projections, HMI CompatibleME13027500 ES13027500 O-ring free, Precision Quartz Torch, ESIME13024500 ES13024500 O-ring free, Precision Quartz Torch, ESIML190018 G182065026 Quartz Torch Shield, 4500ML190045 G182080235 Pyrex Adapter, Ball to Socket, 56 mm, 4500ML190038 G182080237 Quartz Adapter, Ball to Socket, 56 mm (replaces Pyrex G182080235), 4500ML190043 G183365421 Quartz Torch Shield, 24.5mmL w/glass dot, 7500ML190041 G183365426 Quartz Adapter, Ball to Socket, 82 mm, 7500ML190044 G183365427 Quartz T-connector, Ball to Socket, 82 mm, with optional gas inlet, 7500ML190042 G183380040 Quartz Torch Shield, 24.5mmL, 7500ML190040 Pyrex Adapter, Ball to Socket, 82 mm, 7500ML190033Quartz Socket Adapter, to 1/4" EndML190013 G182065337 Quartz Spray Chamber, Double Pass, 12/5 Socket, for Babington and ConcentricML190014 G182065339 Quartz Spray Chamber, Double Pass, 12/5 Socket, extended inner for Cross-flowML190015Quartz Cyclonic Spray Chamber, Top Socket, 90 deg bendML190015ESML190015 with Easy-Seal threaded nebulizer inlet and Teflon PFA cap.TQ-30-A2 G1820-65138 Quartz concentric nebulizer, 2 mL/min, 1 L/min, 30 psiMM151030Teflon Adapter (end cap), 6mm Nebulizer to 35mm Spray ChamberMC65265 G180265265 Skimmer Cone, NickelMC65050 G182065050 Skimmer Cone, NickelMC65237 G182065237 Skimmer Cone, PlatinumMC65238 G182065238 Sampler Cone, NickelMC65239 G182065239 Sampler Cone, PlatinumMC65497 G183365497 Skimmer Cone, Nickel, 7500GV, MicromassML165008 6366307 Quartz Torch, Demountable for ISISML165005 6368301 Quartz Torch, 1.5mm InjectorML165016 6368303 Pyrex Spray Chamber, Double PassML165015 6368308 Quartz Spray Chamber, Double PassML165020 M695210BD1 Quartz Elbow, Ball/SocketML165025 M695531A Quartz BonnetTQ-30-A2Quartz concentric nebulizer, 2 mL/min, 1 L/min, 30 psiMM151030Teflon Adapter (end cap), 6mm Nebulizer to 35mm Spray ChamberMC695011 M695011BD1 Nickel Skimmer ConeMC695080 M695080BD1 Nickel Sampler Cone, Copper BaseMC695439BD1 M695439BD1 Nickel Sampler Cone, PlatformMC695440BD1 M695440BD1 Nickel Skimmer Cone, PlatformJY - Jobin YvonMA1589 31021589 Alumina Injector, 2.0mmML116050 31023722 Quartz Torch Tube, Outer Dem 71mmML116052 31023723 Quartz Torch Tube, Inner, DemML116053 31023724 Teflon Centering RingML116070 31031099 Quartz Torch Tube, Outer, Panorama 105mmML135005 49010100 Quartz Torch, Fixed Injector, 1.5mmML116051Quartz Torch Tube, Outer Dem 82.5mmML116059Quartz Injector, 2.0mmMM116200 46702525 O-ring, Viton, Pack of 4ML116054 31026996 Spray Chamber Scott Type (also 31031326)ML116055 31030809 Cyclonic Spray Chamber (also 31031279), top socket, 4 mm drainML116055ESML116055 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML116056Cyclonic Spray Chamber, 50 mL, top socket, ground glass tapered (14/20) drainML116057 47929046 ML116055 with water jacket for coolingML116060 47929049 Cyclonic Spray Chamber, 20 mL, top socket, 4mm drain2009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 2 of 14

Meinhard Glass ProductsMeinhard Part # OEM Part # DescriptionML135005 0047-2048 Quartz Torch, w/Ball Jt, 1.5 InjectorML135012 0047-2047 Spray Chamber "Scott" Type, BarrelML135025 0047-2033 Quartz BonnetML131001Quartz Torch Tube, Optima 3000R, 3 slots, 138mmML131003 N058-0528 Quartz Torch Tube Type II, 3 slotML131003W N068-1690 Quartz Torch Tube Type II, Wear Metals, 3 slotsML131004 N0690568 Quartz Torch Tube, Optima 3000R, 1 slot, 138mmML131005Quartz Torch Tube, Optima 3000, no slot, 125mmML131007 N058-0233 Quartz Torch TubeML131009 N058-0376 Quartz Torch Tube, SlottedML131011 N0695379 Quartz Torch Tube, Optima XL, 1 slotML131012Quartz Torch Tube, Optima 3x00 DV, 2 slotsML131014 N0691662 Quartz Torch Tube, Optima 3x00 DV, 1 SlotML131015Quartz Torch Tube, Optima DV, 3 SlotML131016 N0771500 Quartz Torch Tube, 4000V , 3 slotsML131017 N0770344 Quartz Torch Tube, 2000/4000/5000 DV, Short, OrganicsML131019 N0770343 Quartz Torch Tube, 2000/4000/5000 DV, No SlotML131020 N0770338 Quartz Torch Tube, 2000/4000/5000 DV, 1 slotML131021 N0772005 Quartz Torch Tube, 2000/4000/5000 DV, 3 slotsML131024 N058-2235 Quartz Bonnet for Plasma IIML131025 N0775289 Quartz Bonnet for 2000/4000 SeriesML131031 N0691664 Quartz Bonnet for 3000 DVML131032 N0695456 Quartz Bonnet for 3000 (after 9/21/94)ML131033 N0695295 Quartz Bonnet for 3000R (before 9/21/94)ML131040 N0775225 Quartz Injector, 0.8mm, 2000/4000,ML131041 N0775226 Quartz Injector, 1.2mm, 2000/4000,ML131042 N0775223 Quartz Injector, 1.6mm, 2000/4000,ML131043 N0775014 Quartz Injector, 2.0mm, 2000/4000,ML131044 N0775224 Quartz Injector, 3.0mm, 2000/4000,ML132033 N0681631 Quartz Injector, 1.2mmML132034 047-3292 Quartz Injector, 1.5mmML132035 N8125029 Quartz Injector, 2.0mmML132040 N0695441 Quartz Injector, 2.0mm, 3000ML132041 N0695442 Quartz Injector, 2.0 mm, 3000XLML132044 N0695449 Quartz Injector, 1.6mm, 3000XLML130046 N0695460 Quartz Injector, 1.2 mm, Optima 3000 XL, 4300V, 5300VMA1531 N0771531 Alumina Injector, 1.2 mm, Optima 2000V/4000V/5000V,MA2184 N0582184 Alumina Injector, 2.0 mm, 1000/2000/II/400/Optima 3000RMA2185 N0582185 Alumina Injector, 1.5mm, 1000/2000/II/400/40, Optima 3000RMA2186 N0582186 Alumina Injector, 0.85mm, 1000/2000/II/400/40/ Optima 3000R,MA5177 N0775177 Alumina Injector, 2.0mm, Optima 2000/4000/5000, DV,MA5227 N0775227 Alumina Injector, 0.80mm, 2000/4000/5000 DV,MA5228 N0775228 Alumina Injector, 1.2mm, 2000/4000/5000 DV,MA5362 N0695362 Alumina Injector, 2.0mm, 3000XL, 3x00DV, 4300V, 5300V,MA6093 N0776093 Alumina Injector, 1.2mm, 2000/4000/5000 DV,ML132060 N0681234 Purge TubeML135025 0047-2033 Quartz Bonnet, ICP6500, ICP5500MM5297 N0775297 Copper Foil, Optima 2000/4000/5000 torch, 24 piecesMM690269 N0690269 O-ring Kit for 3x00R, Pk of 5MM690769 N0690769 O-ring Kit for 3000XL, 3000DV, Pk of 9MM770437 N0770437 O-ring Kit for Optima 2000/4000/5000, pack of 6MM902155 9902155 Viton O-rings for Optima 3x00, Pack of 5MP690780 N0690780 Injector Support Adapter, Cyclonic Spray Chamber for Optima 3000 XL/DVML130019Cyclonic Spray Chamber, Optima 3000 Radial, SCRML130019XL N8122188 Cyclonic Spray Chamber, Optima 3000, XL, DVML130020 N0776053 Cyclonic Spray Chamber 2x00/4x00/5x00DV, Baffle, UnifitML130020ESML130020 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML130021 N0776052 Cyclonic Spray Chamber 2x00/4x00/5x00DV, No Baffle, UnifitML130021ESML130021 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML130022Cyclonic Spray Chamber, 2x00/4x00/5x00DV, Baffle, o-ringsML130023 N0771501 Cyclonic Spray Chamber, 4x00/5x00V, Baffle, Top Socket, UnifitML130031 N0776090 Cyclonic Spray Chamber 2x00/4x00/5x00DV, 4 mm Baffle (organics), UnifitML130031ESML130031 with Easy-Seal threaded nebulizer inlet and Teflon PFA capMM80256 218080256 Nebulizer Adapter - unifit for 6 mm o.d. nebulizer to 16 mm Unifit inletTR-30-A3 00472020 Type A nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiTR-50-C1 0047-2022 Type C nebulizer, glass, 1 mL/min and 1 L/min @ 50 psiTR-30-K3 N068-1574 Type K nebulizer, glass, 3 mL/min and 0.7 L/min @ 30 psiTR-30-C3 N810-2011 Type C nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiTR-30-C0.5 N810-2012 Type C nebulizer, glass, 0.5 mL/min and 1 L/min @ 30 psiTQ-30-A3 WE024371 Type A nebulizer, Quartz, 3 mL/min and 1 L/min @ 30 psiSnapper 1.251 N0777460 Nebulizer gas tubing clampMP2731 9992731 Axial purge window, Optima 2x00/3x00XL/3000SCXMP6549 B0066549 Axial purge window, Optima 3000 DVMP1497 N0581497 Radial purge window, Optima 3000R, 3000 SCR, 3000 RL, 4x00V, 5x00VMP0672 N0690672 Radial purge window, Optima 3000 DV - short tubeMP1689 N0691689 Axial purge window, Optima 3000 DV - long tubeMP770322 N0770322 Radial purge window, Optima 4x00DV/5x00DVMP1116 N0771116 Axial purge window, Optima 4x00/5x002009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 4 of 14

Meinhard Glass ProductsMeinhard Part # OEM Part # DescriptionMM21045 O-ring kit for GemTip Nebulizer, pack of 4Tube-PVCSD-30 09908587 Two-stop peristaltic pump tubing in PVC, black/black, pack of 12Tube-PVCSD-30-F Flared two-stop peristaltic pump tubing in PVC, black/black, 12,Tube-PVCSD-45 N0680375 Two-stop peristaltic pump tubing in PVC, red/red, pack of 12Tube-SolFSD-30 00473550 Two-stop peristaltic pump tubing in SolventFlex, black/black, pack of 12Tube-SolFSD-30-F Flared two-stop peristaltic pump tubing in SolventFlex, black/black, 12Tube-SolFSD-45 N0680376 Two-stop peristaltic pump tubing in SolventFlex, red/red, pack of 12PE Sciex Elan ICP-MS 5000,6000, 9000, DRC, DRC IIME11021000 ES11021000 O-ring free, Demountable, Precision Quartz Torch, ESIML140009 N8102001 Quartz Torch, One Piece, Long Tube, 36.4ML140010 N8122006 Quartz Torch Tube, Demountable SystemMA2186 N8126039 Alumina Injector, 0.85mmMA2185 N8126040 Alumina Injector, 1.5mmMA2184 N8126041 Alumina Injector, 2.0mmMC021137 WE021137 Skimmer cone, Nickel, includes o-ringsMC021140 WE021140 Sampler cone, Nickel, includes o-ringsML140030 WE023948 Quartz Injector, 2.0mm, w/Ball Joint, w/Support RingTQ-30-A3 WE024371 Type A nebulizer, Quartz, 3 mL/min and 1 L/min @ 30 psiFit Kit 3 WE024372 Solution Inlet Adapter for 4 mm nebulizers, includes 1.2 m ETFE tubing.ML140020 WE025221 Quartz Cyclonic Spray Chamber for Ball Joint InjectorML140020ESQuartz Cyclonic Spray Chamber for Ball Joint Injector, with EasySeal InletML140024ESQQuartz Cyclonic Spray Chamber for Ball Joint Injector, with EasySeal InletML140024ESGlass Cyclonic Spray Chamber for Ball Joint Injector, with EasySeal InletML140031 WE027030 Quartz Injector, 0.85mm, w/Ball Joint, w/Support RingMC027802 WE027802 Sampler cone, Platinum,MC027803 WE027803 Skimmer cone, PlatinumML140032 WE027005 Quartz injector, 1.5 mm, w/Ball Joint, w/Support RingTube-PVCSD-30 09908587 Two-stop peristaltic pump tubing in PVC, black/black, pack of 12Tube-PVCSD-30-F Flared two-stop peristaltic pump tubing in PVC, black/black, 12,Tube-PVCSD-45 N0680375 Two-stop peristaltic pump tubing in PVC, red/red, pack of 12Tube-SolFSD-30 00473550 Two-stop peristaltic pump tubing in SolventFlex, black/black, pack of 12Tube-SolFSD-30-F Flared two-stop peristaltic pump tubing in SolventFlex, black/black, 12Tube-SolFSD-45 N0680376 Two-stop peristaltic pump tubing in SolventFlex, red/red, pack of 12Tube-PVCSD-125 N8122012 Two-stop peristaltic pump tubing in PVC, White/Black, pack of 12Plasma Therm ICPML135005ML135012ML135015ML135025Quartz Torch, One Piece, standard, fixed, 1.5 InjSpray Chamber, "Scott Type" BarrelCyclonic Spray ChamberBonnet Quartz TorchSeiko InstrumentsML195005 042220016A3 Quartz Torch, Type A, 1.5mm InjectorML195008Quartz Torch, Type D, 0.8 mm InjectorML195010 CA16012B3 Quartz Torch, Type C, 2.0mm InjectorML195011 CE11511E3 Quartz Torch, Demountable, w/Joint ConnectML195012Pyrex Spray Chamber, Double PassML195025Quartz BonnetTR-50-C1Type C nebulizer, glass, 1 mL/min and 1 L/min @ 50 psiShimadzuML160005 20470272 Quartz Torch, Tapered Injector (1.5 mm) Ball JointML160007 21146605 Quartz Torch, Axial, with curved inlet to tapered injectorSpectro Analytical InstrumentsML175005 75060596 Quartz Torch, Spectroflame, fixed inj 1.8mmML175006 75060545 Quartz Torch, Radial, Demountable, 80mm LengthML175007 48205001 Quartz Torch, Spectroflame Fixed 1.0 Inj OilsML175008Quartz Torch, SpectroFlame Fixed 2.5 InjML175040 48105052 Quartz Torch, EOP, Fixed Flared End 2.5Inj (75160526)ML175041Quartz Torch, EOP, Fixed Flared End 2.2InjML175042 48105052A Quartz Torch, EOP, Fixed Flared End 1.8Inj (75160592)ML175043 48206002 Quartz Torch, SOP, Demountable, No Flare, 100mm LengthML175044 48206007 Quartz Torch, EOP, Demountable No Flare, 80mm LengthML175045 GE318081458 Quartz Torch, EOP, Demountable, Flare,ML175047 75260533 Quartz Torch, EOP, w/Sheath Gas, 3.2 mm InjectorML175048 75160537 Quartz Torch, EOP w/Sheath Gas, 2.5 mm Injector2009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 5 of 14

Meinhard Glass ProductsMeinhard Part # OEM Part # DescriptionML175049 75160549 Quartz Torch, EOP w/Sheath Gas, 1.8 mm InjectorMM175055 Tubing and gas connectors 44302072, 44302077ML175021 48105008 Quartz Injector, 1.5 mmML175022 48105010 Quartz Injector, 1.8mmML175023 48105009 Quartz Injector, 2.5mmML175010Spray Chamber, SlurryML175012 48105003 Spray Chamber, Upward Conical OpenML175014 48105006 Spray Chamber, Large Double PassML175018 48106008 Spray Chamber, Lg, Dbl Pass, Jacketed, Threaded PortsML175019 48105051 Spray Chamber, EOP, Lg Dbl PassML175026 48105001 Cyclonic Spray Chamber, Top Socket, Pump DrainML175026ESML175026 with Easy-Seal threaded nebulizer inlet and Teflon PFA CapML175026EOP 48105061 Cyclonic Spray Chamber, EOP,Pump DrML175026EOP-ESML175026EOP with Easy-Seal threaded nebulizer inlet and Teflon PFA CapML175026QQuartz Cyclonic Spray Chamber, SocketML175026QJ USA00850 Quartz Cyclonic Spray Chamber, Jacketed, Threaded PortsML175031 48105011 Adapter, 12/5 socket, 45 mm for ICPTR-30-C1 76060510 Type C nebulizer, glass, 1 mL/min and 1 L/min @ 30 psiMM175100Liquid inlet fitting and argon tubing with quick disconnect for TR-30-C1Thermo ARLML110005 139009-0003 Quartz Torch, MaxiML112040 173131-0000 Quartz Torch Maxi, Demountable for HFML111030 173463-0000 Quartz Torch, MiniML111031 173473-0000 Quartz Torch, Mini, DemountableML111038 S111403 Quartz Torch MaximML111033 173142-0002 Spray Chamber, Mini, ConicalMP111034 173142-0003 Spray Chamber, Mini, Conical, MDSNML111036 173142-0004 Spray Chamber, Mini, Jacketed, ConicalML110012 173142-0000 Spray Chamber, Maxi, ConicalML111035 173252-0000 Torch Bonnet, MiniML110027 173251-0000 Torch Bonnet, Induction CoilTR-30-A3 914319-000M Type A nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiTR-30-K3 915375-000M Type K nebulizer, glass, 3 mL/min and 0.7 L/min @ 30 psiTR-30-C3 TR-30-C3 Type C nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiMP080963 915817 V-groove high solids nebulizerThermo Elemental, Thermo Jarrell-Ash, TJAML127508 12512401 Radial Base Torch Kit, High Flow, 1.0 Center TubeML127512 12512405 Radial Base Torch Kit, Slotted, 1.0 Center TubeML125041 12540700 Quartz 1.5 mm Center Tube, for Base TorchML125040 12540701 Quartz 1.0 mm Center Tube, for Base TorchML127507 12643201 Radial Base Torch Kit, High Flow, 1.5 Center TubeML127507R Rebuild of user-supplied torch 127507/12644001ML127506 12643202 Radial Base Torch Kit, Low Flow, 1.5 Center TubeML127506R Rebuild of user-supplied torch 127506/12644002ML127510 12643203 Trace Axial Base Torch Kit, 1.5 Center TubeML127510R Rebuild of user-supplied torch 127510/12644003ML127513 12643204 Radial Base Torch Kit, Slotted, 1.5 Center TubeML127507N 12644001 Radial Base Torch, High Flow, No Center TubeML127506N 12644002 Radial Base Torch, Low Flow, No Center TubeML127510N 12644003 Trace Axial Base Torch Body, No Center TubeML127511N 12644005 DUO Axial Base Torch, w/Hole, No Center TubeML127512N 12644006 Radial Base Torch Body, Slotted, No Center TubeMA0700C 13643601 Alumina Center Tube, 1.5 mm, for Base TorchMA0702C 13643602 Alumina Center Tube, 2.0 mm, for Base TorchML125042 13650201 Quartz 2.0 mm Center Tube, for Base TorchML125043 13650202 Quartz 2.4 mm Center Tube, for Base TorchML127511 13856200 DUO Axial Base Torch Kit, w/Hole, 1.5 Center TubeML127511R Rebuild of user-supplied torch 127511/12644005ML127514 13913700 Quartz Torch, fixed inj. 1.5mmML128005 842312051141 Radial Quartz Torch, iCAP 6x00ML128007 842312051241 Duo Quartz Torch, iCAP 6x00ML128040 824312051341 Quartz Center Tube, 1.0 mm, iCAP 6x00ML128041 842312051351 Quartz Center Tube, 1.5 mm, iCAP 6x00ML128042 842312051371 Quartz Center Tube, 2.0 mm, iCAP 6x00ML128050 842312051841 EMT Duo Quartz Torch, iCAP 6x00ML128052 842312051741 EMT Radial Quartz Torch, iCAP 6x00ML128070 842312051941 Quartz Center Tube, 1.0 mm, iCAP 6x00ML128071 842312051951 Quartz Center Tube, 1.5 mm, iCAP 6x00ML128072 842312051971 Quartz Center Tube, 2.0 mm, iCAP 6x00MM125847 12584700 O-ring for Base Torch Injector, pack of 4MM125849 O-ring for Base Torch Teflon Adapter, pack of 4ML125019 13008900 Spray Chamber, Cylindrical, Open Both Ends, Glass Onl2009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 6 of 14

Meinhard Glass ProductsMeinhard Part # OEM Part # DescriptionML127515 13462000 Cyclone Axial Spray Chamber, ICAP 61E TraceML127519 13610500 Cyclone Radial Spray Chamber, Benchtop Iris, Iris Advantage, Gravity DrainML127522 13612000 Cyclone Axial Spray Chamber, TraceScan Iris, Advantage Axial and Iris AP, GravityML127523 13612900 Cyclone Spray Chamber, Right Angle InletML127534 13912300 Conical Spray Chamber, Jacketed, O-ring Inlet, Bent DrainML127533 13921900 Conical Spray Chember, O-ring Inlet, Bent DrainML127517 13966200 Cyclone Axial Chamber, Atomscan, Tracescan IrisML127518 13966300 Cyclone Radial Spray Chamber, Benchtop Iris, Iris Advantage, Pump DrainML127521 14118700 Vertical Cyclone Radial Spray Chamber, Atomscan Advantage Radial ICAPML125012 19040065 Spray Chamber, Cylindrical, Glass OnlyML128010 842312051411 Glass Cyclonic Spray Chamber, iCAP 6x00ML128010ESML128010 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML128012 842312051311 Glass Cyclonic Spray Chamber, with Baffle, iCAP 6x00ML128012ESML128012 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML128020 842312051151 Spray Chamber Adapter, Radial, iCAP 6x00ML128021 842312051251 Spray Chamber Adapter, Duo, iCAP 6x00ML127525 8520700 Anti-arc CapML127526 8520701 Anti-arc Cap, w/Flat EdgeMM125100 Nebulizer gas line Luer fitting, male/female pair (TJA 13584100/13584200)TR-30-K2 13918400 Type K nebulizer, glass, 2 mL/min and 0.7 L/min @ 30 psiTR-30-A2 842312051431 Type A nebulizer, glass, 2 mL/min and 1 L/min @ 30 psiTR-50-A2Type A nebulizer, glass, 2 mL/min and 1 L/min @ 50 psiTR-50-C2 842312051331 Type C nebulizer, glass, 2 mL/min and 1 L/min @ 50 psiMP080963 824312051321 V-Groove Nebulizer, Noordermeer, 6 mm O.D., 30 psiMiraMist 842312051471 MiraMist Parallel-Path Nebulizer in PEEK. 1 L/min @ 45 psiTube-PVCSD-25 842312051511 PVC 2-stop tubing, 0.025", or/whTube-PVCSD-25-FPVC 2-stop tubing, 0.025", or/wh, flared both endsTube-PVCSD-40 842312051521 PVC 2-stop tubing, 0.040", wh/whTube-PVCSD-35-3 13017700 PVC 3-stop tubing, 0.035", or/orTube-PVCSD-35-3FPVC 3-stop tubing, 0.035", or/or, flared both endsTube-PVCSD-45-3 13107701 PVC 3-stop tubing, 0.045", red/redThermo Finnigan ICP-MSML185006Quartz Torch, Element, 1.0 mm InjectorML185007Quartz Torch, Element, 1.5 mm InjectorML185008Quartz Torch, Element, 2.0 mm InjectorML185010 1091250 Quartz Torch, Element, Demountable TubeME10021000 ES10021000 O-ring free, Precision Quartz Torch, Element, ESIME1002 ES1002 Quartz Torch, Type CDML185018Quartz Spray Chamber, Element, Jacketed for Coolant, Threaded Port ConnectionsML185033Quartz Collar/SleeveMC1044530 1044530 Sampler Cone, NickelMC1067500 1067500 Sampler Cone, PlatinumMC1067600 1067600 Skimmer Cone, NickelMC1047460 1047460 Skimmer Cone, PlatinumMC1142160 1142160 Skimmer Cone (X), NickelMC1142150 1142150 Skimmer Cone (X), PlatinumTQ-30-A1Type A nebulizer, Quartz, 1 mL/min and 1 L/min @ 30 psiTQ-50-A1Type A nebulizer, Quartz, 1 mL/min and 1 L/min @ 50 psiTR-30-A1Type A nebulizer, borosilicate glass, 1 mL/min and 1 L/min @ 30 psiTR-50-A1Type A nebulizer, borosilicate glass, 1 mL/min and 1 L/min @ 50 psiCIR-50-HK 70005-98010 Helium nebulizer for LC-MSThermo VG InstrumentsML145005 3201192 Quartz Torch, ICPMS, w/Ball Jt, 1.5 InjectorML145006 3201732 Quartz Torch, ICPMS, w/Ball Jt, 2.0 InjectorML145007Quartz Torch, ICPMS, w/Ball Jt, 1.0 InjectorML145008 1200080 Quartz Torch, ICPMS, DemountableML145009Quartz Torch, ICPMS, Demountable, AxiomML145010 3600970 Quartz Torch, ICPMS X Series, DemountableML145011 3600969 Quartz Torch, ICPMS X Series, w/Ball Joint, 1.5mm InjectorML145012 3600791 Quartz Torch, ICPMS X Series, w/Ball Joint, 2.0mm InjectorML145029 3203789 Quartz Shield, ICPMS (also VG# 3600884)ML145050 3601145 Quartz Torch, ICPMS X Series, w/Ball Joint, 1.5mm InjectorML145053 3601149 Quartz Shield, X-series ICPMSME12020201 ES12020201 O-ring free, Precision Quartz Torch, PQ-series, ESIME12020301 ES12020301 O-ring free, Precision Quartz Torch, X-series, ESIML145032 3200727 Quartz Coupling, Ball/Socket, 90 deg, for 3200841 Spray ChamberML145016 3200841 Quartz Spray Chamber, Scott type, Jacketed for coolantML145022 3204313 Glass Spray Chamber, Impact, Conical, JacketedML145027 3600093 Quartz Cyclonic Spray Chamber, X-SeriesML145025 3600169 Quartz Coupling, Ball/Socket, 17 degML145024 3600170 Quartz Spray Chamber, Peltier CooledML145023 3600374 Quartz Spray Chamber, Impact, JacketedMC0860 3200860 VG HPI Skimmer Cone, Nickel, does not include gaskets2009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 7 of 14

Meinhard Glass ProductsMeinhard Part # OEM Part # DescriptionMC4661 3004661 VG HPI Sampler Cone, Nickel, includes gasketsMC1101 3201101 Skimmer Cone, PlatinumMC0262 3200262 Sampler Cone, PlatinumMM145100 Viton O-rings for VG ICPMS Interface, pack of 3TR-30-A3 1040894 Type A nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiTR-30-A1 1201318 Type A nebulizer, glass, 1 mL/min and 1 L/min @ 30 psiTQ-30-A3Type A nebulizer, Quartz, 3 mL/min and 1 L/min @ 30 psiTR-30-C3 TR-30-C3 Type C nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiVarian Analytical InstrumentsML180005B 2010069610 Quartz Torch, ICP-ES, w/Ball JointML180005 2010069690 Quartz Torch, ICP-ESML180005SQuartz Torch, ICP-ES, Socket JointML180025 2010070700 Quartz Bonnet, ICP (also 2010070790)ML180010 2010072900 Quartz Torch, Demountable ICP-ESML180047 2010077500 Quartz Injector, 0.8mm IDML180006 2010078300 Quartz Torch, ICP-MSML180011 2010079390 Quartz Torch, Demountable ICP-MSML180014 2010081200 Quartz Torch, ICP AX, 2.3 mm injectorML180015 2010083400 Quartz Torch, Demountable AXML180017 2010090400 Quartz Torch, ICP AX, w/Right Angle End, 2.3 mm injectorML180016 2010092800 Quartz Torch, ICP AX, w/Right Angle End, 2.3 mm injectorML180030 2010100700 Quartz Torch, ICPMS, w/Ball JointML180026 2010104700 Quartz Torch, ICP AX, w/Right Angle End, 0.8 mm injectorML180027 2010104800 Quartz Torch, ICP AX, w/Right Angle End, 1.5 mm injectorML180028 2010117400 Quartz Torch, ICP Radial, 0.8 mm injectorML180029 2010117500 Quartz Torch, ICP Radial, 1.4 mm injectorMP180048 9910057300 Injector Support Adapter PTFEMA6759 2410067590 Alumina Injector 1.8 mmID x 4mmOD x 129mmML180046 9910057000 Quartz Injector, 1.4mm IDML180018 GE#808-0540 Quartz Torch, ICP AX, w/Right Angle SocketML180012 GE#809-0549 Long Transfer Tube, Chamber to Torch, w/Ball JointsML180005SQuartz Torch, ICP, w/SocketML180013Pyrex Cyclone Spray Chamber, Baffle, Top Socket, UnifitML180019 7910043700 Pyrex Cyclone Spray Chamber, Baffle, 8 mm Top, UnifitML180019ESML180019 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML180021 2010081700 Pyrex Cyclonic Spray Chamber, 8 mm Top, O-ring InletML180021ESML180021 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML180022Pyrex Cyclonic Spray Chamber, Baffle, 8 mm Top, O-ring InletML180023 9910070400 Spray Chamber, Glass, Jacket/CoolantML180031 0102-932 Quartz Spray Chamber, ICPMS, Double PassML180032 0102-1064 Quartz Universal Joint, ExtensionML180033 0102-933 Quartz Make-up IN-Port 2MG800256 218080256 Nebulizer Adapter - unifit for 6 mm o.d. nebulizer to 16 mm inletTR-30-K3 2010081600 Type K nebulizer, glass, 3 mL/min and 0.7 L/min @ 30 psiTR-30-C2 2010076500 Type C nebulizer, glass, 2 mL/min and 1 L/min @ 30 psiTR-30-K2 2010069500 Type K nebulizer, glass, 2 mL/min and 0.7 L/min @ 30 psiTube-PVCSD-30 3710027200 PVC 2-Stop Tubing 0.030" Black/BlackTube-PVCSD-40 3710034400 PVC 2-Stop Tubing 0.040" White/WhiteTube-PVCSD-51 3710034500 PVC 2-Stop Tubing 0.051" Gray/GrayTube-PVCSD-65 3170034600 PVC 2-Stop Tubing 0.065" Blue/BlueMC10094100 9910094100 Skimmer cone, Nickel,MC10094000 9910094000 Sampler cone, Nickel,ML130035 9910040000 VGA 76/77: Quartz Absorption Cell, pk of 2ML130030 9910040700 VGA 76/77: Quartz Mercury Flow Cell KitML130060 9910054400 VGA 76/77: Quartz Atom Concentrator Tube, ACT 80, pk of 102009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 8 of 14

Meinhard Glass ProductsMEINHARD PERISTALTIC PUMP TUBING30 June 2009ALL TUBING - PACK OF 12 PIECESSTANDARD SIZESMeinhard Part #Tube-PVCSD-05Tube-PVCSD-05-FTube-PVCSD-075Tube-PVCSD-075-FTube-PVCSD-10Tube-PVCSD-10-FTube-PVCSD-15Tube-PVCSD-15-FTube-PVCSD-20Tube-PVCSD-20-FTube-PVCSD-25Tube-PVCSD-25-FTube-PVCSD-30Tube-PVCSD-30-3Tube-PVCSD-30-FTube-PVCSD-35Tube-PVCSD-35-3Tube-PVCSD-35-3FTube-PVCSD-35-FTube-PVCSD-40Tube-PVCSD-45Tube-PVCSD-45-3Tube-PVCSD-45-FTube-PVCSD-51Tube-PVCSD-56Tube-PVCSD-56-3Tube-PVCSD-65Tube-PVCSD-69Tube-PVCSD-81Tube-PVCSD-90Tube-PVCSD-125Tube-SolFSD-30Tube-SolFSD-30-3Tube-SolFSD-30-FTube-SolFSD-35Tube-SolFSD-35-3Tube-SolFSD-35-FTube-SolFSD-45Tube-SolFSD-45-3Tube-SolFSD-45-FTube-SolFSD-51Tube-SolFSD-56Tube-SolFSD-81Tube-Viton-20Tube-Viton-30Tube-Viton-30-3Tube-Viton-35Tube-Viton-35-3Tube-Viton-40Tube-Viton-40-3Tube-Viton-45Tube-Viton-45-3Tube-Viton-51Tube-Viton-81Tube-Viton-81-3Tube-Antipuls16-30Tube-Antipuls16-51DescriptionPVC 2-Stop Tubing 0.005" Orange/BlackPVC 2-Stop Tubing 0.005" Orange/Black, Flared both endsPVC 2-Stop Tubing 0.0075" Orange/RedPVC 2-Stop Tubing 0.0075" Orange/Red, Flared both endsPVC 2-Stop Tubing 0.010" Orange/BluePVC 2-Stop Tubing 0.010" Orange/Blue, Flared both endsPVC 2-Stop Tubing 0.015" Orange/GreenPVC 2-Stop Tubing 0.015" Orange/Green, Flared both endsPVC 2-Stop Tubing 0.020" Orange/YellowPVC 2-Stop Tubing 0.020" Orange/Yellow, Flared both endsPVC 2-Stop Tubing 0.025" Orange/WhitePVC 2-Stop Tubing 0.025" Orange/White, Flared both endsPVC 2-stop tubing 0.030" Black/BlackPVC 3-stop tubing 0.030" Black/BlackPVC 2-stop tubing 0.030" Black/Black, Flared both endsPVC 2-stop tubing 0.035" Orange/OrangePVC 3-stop tubing 0.035" Orange/OrangePVC 3-stop tubing 0.035" Orange/Orange, Flared both endsPVC 2-stop tubing 0.035" Orange/Orange, Flared both endsPVC 2-Stop Tubing 0.040" White/WhitePVC 2-stop tubing 0.045" Red/RedPVC 3-stop tubing 0.045" Red/RedPVC 2-stop tubing 0.045" Red/Red, Flared both endsPVC 2-stop tubing 0.051" Gray/GrayPVC 2-Stop Tubing 0.056" Yellow/YellowPVC 3-Stop Tubing 0.056" Yellow/YellowPVC 2-Stop Tubing 0.065" Blue/BluePVC 2-Stop Tubing 0.069" Blue/GreenPVC 2-Stop Tubing 0.081" Purple/PurplePVC 2-Stop Tubing 0.090" Purple/BlackPVC 2-Stop Tubing 0.125" White/BlackSolventFlex 2-Stop Tubing 0.030" Black/BlackSolventFlex 3-Stop Tubing 0.030" Black/BlackSolventFlex 2-Stop Tubing 0.030" Black/Black, Flared both endsSolvent Flex 2-Stop Tubing 0.035" Orange/OrangeSolvent Flex 3-Stop Tubing 0.035" Orange/OrangeSolvent Flex 2-Stop Tubing 0.035" Orange/Orange, Flared both endsSolventFlex 2-Stop Tubing 0.045" Red/RedSolventFlex 3-Stop Tubing 0.045" Red/RedSolventFlex 2-Stop Tubing 0.045" Red/Red, Flared both endsSolventFlex 2-Stop Tubing 0.051" Gray/GraySolventFlex 2-Stop Tubing 0.056" Yellow/YellowSolventFlex 2-Stop Tubing 0.081" Purple/PurpleAcidflex/Viton 2-Stop Tubing 0.020" Orange/YellowAcidflex/Viton 2-Stop Tubing 0.030" Black/BlackAcidflex/Viton 3-Stop Tubing 0.030" Black/BlackAcidflex/Viton 2-Stop Tubing 0.035" Orange/OrangeAcidflex/Viton 3-Stop Tubing 0.035" Orange/OrangeAcidflex/Viton 2-Stop Tubing 0.040" White/WhiteAcidflex/Viton 3-Stop Tubing 0.040" White/WhiteAcidflex/Viton 2-Stop Tubing 0.045" Red/RedAcidflex/Viton 3-Stop Tubing 0.045" Red/RedAcidflex/Viton 2-stop Tubing 0.051" Gray/GrayAcidfelx/Viton 2-stop Tubing 0.081" Purple/PurpleAcidfelx/Viton 3-stop Tubing 0.081" Purple/PurplePVC 2-Stop Tubing 0.030" Black/BlackPVC 2-Stop Tubing 0.051" Gray/Gray2009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 9 of 14

Meinhard Glass ProductsElemental Scientific Sample Introduction Kits and Accessories30 June 2009PFA Cyclonic Spray chambersES-31zz-3001ES-31zz-3011ES-31zz-3101ES-31zz-3111O-ring free PFA cyclonic spray chamber for ICP-OES (no baffle), ESI injector connectionO-ring free PFA baffled cyclonic spray chamber for ICPMS, ESI injector connectionO-ring free PFA cyclonic spray chamber (no baffle) with 1/4-28 threaded port, ESI injectorconnectionO-ring free PFA baffled cyclonic spray chamber with 1/4-28 threaded port, ESI injector connectionMust specify instrument manufacturer and model (zz)Standard HF-Resistant Sample Introduction KitsEach kit includes: 2 MicroFlow Teflon PFA Nebulizers (specify aspiration rate)1 PureCap Teflon PFA Spray Chamber End Cap1 PureChamber low-flow, double-pass, Teflon PFA spray chamber1 Sapphire Injector, 1.8 mm i.d., with Teflon PFA base1 Quartz TorchPart Number OEM Part No. DescriptionES-2160-4500-xx Agilent 4500 ICPMSES-2160-7500-xxAgilent 7500 ICPMSES-2290-0350-xxGV Instruments ICPMSES-2280-0351-xxHoriba Jobin-Yvon radial ICPES-2260-0470-xxLeeman Labs ICPES-2320-8210-xxNU Instruments ICPMSES-2170-0352-xxPerkinElmer/Sciex ELAN 6000, 9000, DRC, DRC II ICPMS (35mm)ES-2170-0472-xxPerkinElmer/Sciex ELAN 6000, 9000, DRC, DRC II ICPMS (47mm)ES-2270-4470-xxPerkinElmer Optima 2000/4000 series ICPES-2270-2470-xxPerkinElmer Optima 3000 series radial ICPES-2270-1470-xxPerkinElmer Optima 3000 series axial ICPES-2250-0470-xxSpectro Ciros ICPES-2185-0471-xxThermo Finnigan Element, Neptune ICPMS (Type CD torch)ES-2230-1470-xxThermo Jarrell-Ash Iris axial ICPES-2230-2470-xxThermo Jarrell-Ash Iris radial ICPES-2190-0350-xxThermo VG Axiom, PQ3 (water-cooled spray chamber) ICPMSES-2190-1470-xxThermo VG X-series ICPMSES-2240-3470-xxVarian Liberty ICPES-2240-1470-xxVarian UltraMass ICPMSES-2240-2470-xxVarian Vista ICPES-2240-4470-xxVarian ICPMSMicroFlow and PolyPro NebulizersPart Number OEM Part No. Description Each $USES-2040-yy PFA-ST nebulizer with one exchangeable external capillary (specify) 992ES-2020 PFA-20, 20 uL/min 1,155ES-2000 PFA-50, 50 uL/min 1,045ES-2002 PFA-100, 100 uL/min 1,045ES-2005 PFA-400, 400 uL/min 1,045ES-4040-yy PolyPro-ST Polypropylene nebulizer with one exchangeable external capillary 5202009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 10 of 14

Meinhard Glass ProductsNebulizer Combinations for Upgrade KitsPart Numberxx=10xx=11xx=12xx=13xx=14xx=15xx=16xx=17xx=18xx=19xx=20xx=21xx=22xx=23xx=24xx=25xx=26xx=27xx=28xx=29xx=40xx=41DescriptionPFA-20 (20 uL/min) and PFA-20 (20 uL/min)PFA-20 (20 uL/min) and PFA-50 (50 uL/min)PFA-20 (20 uL/min) and PFA-100 (100 uL/min)PFA-20 (20 uL/min) and PFA-400 (400 uL/min)PFA-20 (20 uL/min) and PFA-ST (variable)PFA-50 (50 uL/min) and PFA-50 (50 uL/min)PFA-50 (50 uL/min) and PFA-100 (100 uL/min)PFA-50 (50 uL/min) and PFA-400 (400 uL/min)PFA-50 (50 uL/min) and PFA-ST (variable)PFA-100 (100 uL/min) and PFA-100 (100 uL/min)PFA-100 (100 uL/min) and PFA-400 (400 uL/min)PFA-100 (100 uL/min) and PFA-ST (variable) - standard for ICPMSPFA-400 (400 uL/min) and PFA-400 (400 uL/min)PFA-400 (400 uL/min) and PFA-ST (variable)PFA-ST (variable) and PFA-ST (variable)1 PFA-20 (20 uL/min) (deduct $995 from kit price)1 PFA-50 (50 uL/min) (deduct $995 from kit price)1 PFA-100 (100 uL/min) (deduct $995 from kit price)1 PFA-400 (400 uL/min) (deduct $995 from kit price)1 PFA-ST (variable) (deduct $945 from kit price)PolyPro-ST (variable) and PolyPro-ST (variable)1 PolyPro-ST (variable) (deduct $495 from kit price)Capillary Selection Guide for ST NebulizersPart Numberyy=25yy=26yy=27yy=28yy=29Description20 uL/min50 uL/min100 uL/min400 uL/min700 uL/minApexApex - fully integrated, high-sensitivity sample inlet systems for ICPMS and ICP-OES. Includestwo PFA MicroFlow nebulizers. Specify electrical outlet, instrument manufacturer and model.Each $USApex Q ES-43zz-1000-21 Apex Q System with one PFA-100 nebulizer and one PFA-ST nebulizer 12,900Apex HF ES-44zz-1000-21 Apex HF System with one PFA-100 nebulizer and one PFA-ST nebulizer 17,900Apex IR ES-45zz-1000-21 Apex IR System with one PFA-100 nebulizer and one PFA-ST nebulizer 14,900Apex E ES-48zz-1000-24 Apex E System for ICP with two PFA-ST nebulizers 11,400ACM Module ES-4599-2000 Cooled Micro-porous Nafion membrane desolvation unit 3,990Spiro TMD ES-4599-3000 Heated Macro-porous Teflon membrane desolvation unit 4,500Must specify instrument manufacturer and model (zz)PC3PC3 - a small, simple, and robust Peltier cooler for cyclonic spray chambersEach $USES-41zz-1001 PC3 with quartz cyclonic spray chamber for ICP-OES (no baffle), ESI injector connection 2,455ES-41zz-1011 PC3 with baffled quartz cyclonic spray chamber for ICPMS, ESI injector connection 2,480ES-41zz-1101 PC3 with quartz cyclonic and 1/4-28 threaded port for auxiliary gas, ESI injector connection 2,530ES-41zz-1111PC3 with baffled quartz cyclonic and 1/4-28 threaded port for auxiliary gas, ESI injectorconnection 2,555ES-41zz-3001 PC3 with PFA cyclonic spray chamber for ICP-OES (no baffle), ESI injector connection 2,925ES-41zz-3011 PC3 with baffled PFA cyclonic spray chamber for ICPMS, ESI injector connection 2,950ES-41zz-3101 PC3 with PFA cyclonic spray chamber and 1/4-28 threaded port, ESI injector connection 3,000ES-41zz-3111 PC3 with baffled PFA cyclonic spray chamber and 1/4-28 threaded port, ESI injector connection 3,025Must specify instrument manufacturer and model (zz)2009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 11 of 14

Meinhard Glass ProductsSpetec Peristaltic Pumps and Accessories30 June 2009Part Number OEM Part No. DescriptionPerimax 12/1 - SM 08-1000 1 channel, 12 rollers, adjustable tension, with basic remote control, 115/230V 50/60Hz 70WPerimax 12/2 - SM 08-10012 channels, 12 rollers, individually adjustable tension, with basic remote control 115/230V 50/60Hz70WPerimax 12/4 - SM 08-10034 channels, 12 rollers, individually adjustable tension, with basic remote control 115/230V 50/60Hz70WPerimax 12/6 08-0109 6 channels, 12 rollers, individually adjustable tension, with basic remote control (rmds), 115VPerimax 12/6 08-0104 6 channels, 12 rollers, individually adjustable tension, with basic remote control (rmds), 230VPerimax 16/1 - SM 08-1500Perimax 16/2 - SM 08-1502Perimax 16/3 08-0509Perimax 16/3 08-05031 channel, 16 rollers, individually adjustable tension (or 2 standard channels), with basic remotecontrol 115/230V 50/60Hz 70W2 channels, 16 rollers, individually adjustable tension (or 4 standard channels), with basic remotecontrol 115/230V 50/60Hz 70W3 channels, 16 rollers, individually adjustable tensions (or 6 standard channels), with basic remotecontrol (rmds), 115V3 channels, 16 rollers, individually adjustable tensions (or 6 standard channels), with basic remotecontrol (rmds), 230VPart Number OEM Part No. DescriptionGilson rem option 08-0148 Allows Spetec pump to be controlled by Gilson interface, off/on/high speedGilson adapter 08-0045 Allows Spetec pump head to be used on Gilson pump chassisPump head, 12/1 08-0005Pump head, 12/2 08-0006Pump head, 12/4 08-0008Pump head, 12/6 08-0009Pump head, 16/1 08-0046Pump head, 16/2 08-0047Pump head, 16/3 08-0048Drive motor 115V 24-0011 115 V, includes gear and optical encoderDrive motor 230V 24-0010 230 V, includes gear and optical encoder2009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 12 of 14

Meinhard Glass ProductsModel W(mm) D(mm) H(mm) W(in) D(in) H(in)FBS 21 610 350 700 24.0 13.8 27.6FBS 37 610 610 700 24.0 24.0 27.6FBS 56 915 610 700 36.0 24.0 27.6FBS 75 1220 610 700 48.0 24.0 27.6FBS 93 1525 610 700 60.0 24.0 27.6FBS 112 1830 610 700 72.0 24.0 27.6OptionsPlastic coatingFrame base, for FBS 21, stainless steel, with castorsFrame base, for FBS 37, stainless steel, with castorsFrame base, for FBS 56, stainless steel, with castorsFrame base, for FBS 75, stainless steel, with castorsFrame base, for FBS 93, stainless steel, with castorsFrame base, for FBS 112, stainless steel, with castorsCabinet, for FBS 21, 2 drawers, 1 cupboardCabinet, for FBS 37, 2 drawers, 1 cupboardCabinet, for FBS 56, 2 drawers, 1 cupboardCabinet, for FBS 75, 2 drawers, 1 cupboardCabinet, for FBS 93, 2 drawers, 1 cupboardCabinet, for FBS 112, 2 drawers, 1 cupboardInterior lighting, fluorescent tube, external switchInterior lighting, UV lamp, external switchAutomatic flow controller, with filter charge indicatorSpare Filter, FBS 21Spare Filter, FBS 37Spare Filter, FBS 56Spare Filter, FBS 75Spare Filter, FBS 93Spare Filter, FBS 112Other ModelsPBS-37FMS-37FBS-V-37EFBS-37EFBS-V-37Call for more informationSpetec Portable Cleanroom Technology30 June 20092009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 13 of 14

Meinhard Glass Products30 June 2009Analab EVAPOCLEANPart NumberEV.3.25.RNPEV.6.25.RNPEV.12.25.RNPEV.3.125.RNPEV.6.125.RNPEV.12.125.RNPEV.3.25.RPEV.6.25.RPEV.12.25.RPEV.3.125.RPEV.6.125.RPEV.12.125.RPEV.COUDE.25EV.COUDE.125STAND-6x25mLSTAND-6x125mLDescriptionEvapoclean with 3 ports, 3 elbows, 6 vessels (17 or 33mL), basic controller 110 or 230 VEvapoclean with 6 ports, 6 elbows, 12 vessels (17 or 33mL), basic controller, 110 or 230 VEvapoclean with 12 ports, 12 elbows, 24 vessels (17 or 33mL), basic controller, 110 or 230 VEvapoclean with 3 ports, 3 elbows, 6 vessels (60, 90, or 180mL), basic controller, 230VEvapoclean with 6 ports, 6 elbows, 12 vessels (60, 90, or 180mL), basic controller, 230VEvapoclean with 12 ports, 12 elbows, 24 vessels (60, 90, or 180mL), basic controller, 230VEvapoclean with 3 ports, 3 elbows, 6 vessels (17 or 33mL), programmable controller, 110 or 230VEvapoclean with 6 ports, 6 elbows, 12 vessels (17 or 33mL), programmable controller, 110 or 230VEvapoclean with 12 ports, 12 elbows, 24 vessels (17 or 33mL), programmable controller, 110 or 230VEvapoclean with 3 ports, 3 elbows, 6 vessels (60, 90, or 180mL), programmable controller, 230VEvapoclean with 6 ports, 6 elbows, 12 vessels (60, 90, or 180mL), programmable controller, 230VEvapoclean with 12 ports, 12 elbows, 24 vessels (60, 90, or 180mL), programmable controller, 230VPTFE Elbow for 17, 24, 33, 64 mL vesselsPTFE Elbow for 60, 90, 180 mL vesselsOptional stand with 6 positions for 25 mL bottlesOptional stand with 6 positions for 125 mL bottlesAnalab EASYDIGESTED.8/180-230V.RNPED.24/50-230V.RNPED.48/50-230V.RNPED.8/180-230.RPED.24/50-230V.RPED.48/50-230V.RPEasydigest with 8 positions for 180 mL vessels (59 mm o.d.), basic controller, 230VEasydigest with 24 positions for 50 mL PP vessels (66 mm o.d.), basic controller, 230VEasydigest with 48 positions for 60 mL PFA vessels (49 mm o.d.), basic controller, 230VEasydigest with 8 positions for 180 mL vessels (59 mm o.d.), programmable controller, 230VEasydigest with 24 positions for 50 mL PP vessels (66 mm o.d.), programmable controller, 230VEasydigest with 48 positions for 60 mL PFA vessels (49 mm o.d.), programmable controller, 230VAnalab Hot PlatesPL.A4.100.110.RNP Acid inert hot plate, 300 mm x 200 mm x 40 mm, 100 - 110v, 50/60 Hz, basic controllerPL.A4.230.RNPAcid inert hotplate, 300 mm x 200 mm x 40mm, 230v, 50/60 Hz, basic controllerPL.A3.100.110.RNPAcid inert hotplate, 300 mm x 400 mm x 40 mm, 100 - 110v, 50/60 Hz, basic controllerPL.A3.230.RNPAcid inert hot plate, 300 mm x 400 mm x 40 mm, 230v, 50/60 Hz, basic controllerPL.380X540X40.230V.RNP Acid inert hotplate, 540 mm x 380 mm x 40 mm, 230v, 50/60 Hz, basic controllerAsk about other sizes and configurations.Analab Mini Vessel CleanerMV.1Closed system cleaner uses condensation of high purity solvent vapors to clean labware2009 Price ListPrinted 8/10/2009700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 sales@meinhard.com www.meinhard.comPage 14 of 14

Teflon ® PFA, HF-resistant sample introduction components,“Preferred by the semiconductor industry.”• Clean Teflon ® PFA components for lower background equivalent concentrations (BECs) and detection limits• O-ring free connections ensure lowest BECs, highest chemical resistance, and easy cleaning• Chemically resistant to strong acids, strong alkalis, and organic solvents• Available for all major ICPAES and ICPMS modelsMicroFlow PFA Nebulizers• Chemically resistant, all-Teflon ® construction• Low, spike-free background• Resistant to clogging, reliably self-aspirated or pumped• Fine aerosol, high transport efficiency• Fully interchangeable with Meinhard ® nebulizers• Self-aspirate at 20, 50, 100, or 400 µL/min• Threaded interface for low dead-volume connections• ST version includes 2 exchangeable capillaries; 100 µL/min is standard; .see Selection Guide for uptakeand capillary selection alternatives• ST-full version includes 100, 400, and 700 µL/min capillaries.O-ring free Injectors and Precision Quartz Torches• Reduces contamination, easy to clean, easy to insert• Precise alignment• Pt injector (2 mm i.d.) for sub-ppt determinations• Sapphire injector (1.8 mm i.d.) for most high-purity and low background applications• Quartz injector (1.5 mm i.d.) offers economical solution for most non-HF applicationsPFA PureChamber and PureCap• Low contamination, chemically inert• O-ring free seals – easy to clean, low maintenance• Excellent short-term and long-term stability• High transmission, high sensitivity• Fast washout• Adapts to 6 mm o.d. Meinhard ® nebulizer• Available for most ICP and ICPMS systemsPolyPro Nebulizer• Low-cost alternative to PFA• Excellent chemical resistance• Can be used where aggressive chemicals are to be analyzed for an extended period of time• Fully interchangeable with Meinhard ® nebulizers• ST version standard for ICP-OES; see Selection Guide for uptake and capillary selection; 400 µL/min isstandardComplete Teflon ® PFA Upgrade Kits for ICPAES and ICPMS include:• 2 PFA MicroFlow nebulizers• 1 PFA o-ring free PureCap end cap• 1 PFA PureChamber spray chamber• 1 HF-resistant injector (Pt or sapphire)• 1 Quartz torch• All necessary gas lines and connectorsUpgrade kits are available for all major ICP and ICPMS instruments. Please supply the model name or numberwhen ordering.Recommendations:• The PFA-20 is intended for use in Semicon labs with Si wafer samples, or for petrochemicals that areparticle-free.• The PFA-50 is recommended for low-flow semicon applications and organic solvents.• The PFA-100 is recommended for general purpose semicon and research applications. This is the defaultnebulizer for ICPMS applications.• The PFA-ST is recommended for ICP and ICPMS when samples have large, undissolved particles.• The PolyPro-ST is recommended for ICPAES, for a higher sample flow rate, and a lower-cost HF-resistantsample introduction system. This is the default nebulizer for ICP systems.Meinhard Glass Products700 Corporate Circle, Suite A Golden, Colorado 80401 USA1.800.MEINHARD 303.277.9776 Sales@meinhard.com www.meinhard.com

3100 Series O-ring-free Cyclonic Spray Chambers in HF-Resistant PolypropyleneES-31zz-debuCreate a part number by selecting the instrument model (zz), spray chamber material (d), auxiliary gasport (e), baffle (b), and choose the outlet for the ICP injector (u).Refer to the table for instrument model (zz).The additional price for an auxiliary port and baffle are indicated below.Spray Chamber OptionsUS Listd = chamber material (normally 1 or 2)d = 1 quartz (High Purity) $525d = 2 polypropylene (HF resistant) $700d = 4 glass $300e =auxilary port (required for Agilent and for organic solvent applications)e = 0 no aux. port (standard configuration) $0e = 1 threaded aux. port, 1/4-28 (standard aux. port for oxygen or make up gas) $75e = 2 aux. port, 2mm x 4 mm $60b = baffle typeb = 0 non-baffled (recommended for ICP-AES) $0b = 1 baffled (recommended for ICP-MS) $25u = outlet connector typeu = 1 ESI injector connectionu = 7 TJA base torch connector (3/8" straight-tube outlet)u = 8 12/5 socket connection (many OEM, PE ELAN OEM Quartz Injector)u = 9 PerkinElmer connector (non-glass, non-12/5 socket)zz = instrumentzz = 50 Genericzz = 51 Finnigan Element 1zz = 52 Finnigan Element 2zz = 53 Finnigan Neptunezz = 54 PE Elan 5000/6000/9000/DRCzz = 55 PE Optima 3000 Radialzz = 56 PE Optima 3000 XL/DVzz = 57 PE Optima 2000/4000zz = 58 VG Axiomzz = 59 VG PQzz = 60 VG X Serieszz = 61 Agilent 4500zz = 62 Agilent 7500zz = 63 GV Isoprobezz = 64 GV Platformzz = 65 Varian Vista/Vista Prozz = 66 Varian Libertyzz = 79 Varian ICPMSzz = 67 Spectro Ciroszz = 68 TJA ICP Axialzz = 71 TJA ICP Radialzz = 69 Seiko ICPMSzz = 70 Seiko ICPAESzz = 75 Micromass PT2zz = 76 JY Ultratracezz = 81 JY Radialzz = 77 Leeman DRE (Axial)zz = 78 Leeman Radialzz = 80 ARL 3500 serieszz = 82 NU InstrumentElemental Scientific’s PolyProCyclonic Spray Chambers acceptany 6mm nebulizer and may beused with ESI’s PC3 Peltier chiller.Note:All 3100 series Cyclonic Spray Chambers will fit the ESI PC3 Peltier Cooler.3100 Series Cyclonic Spray Chambers may also be used stand-alone.Meinhard Glass Products700 Corporate Circle, Suite A Golden, Colorado 80401 USA1.800.MEINHARD 303.277.9776 Sales@meinhard.com www.meinhard.com

PC3 – Spray Chamber Temperature ControlCompact, Peltier-cooled Cyclonic Spray Chamber for ICP-OES and ICP-MSPC3 Advantages‣ Thermal stabilization of spray chamberimproves long-term stability• Reduces effect of laboratory temperaturevariation on signal stability• Reduces solvent loading of plasma‣ Fast rinse-out using o-ring-free cyclonicspray chamber in quartz or Teflon ® PFA‣ Reduced oxides in ICP-MS‣ Optional oxygen addition port for organicsolventsPC3 Features‣ User-selectable control of spray chambertemperature: +2 C or -5 C (-20 C optional)‣ Quartz cyclonic spray chamber or TeflonPFA spray chamber for HF resistance‣ Direct connection to torch injector‣ Completely o-ring free to facilitateanalysis of organic solvent solutions‣ Accepts 6 mm o.d. concentric nebulizers• Meinhard TR- and TQ-series• Elemental Scientific PFA-series‣ PC3-SSI model for isotope ratiodetermination or other high precisionanalyses‣ Optional mounting tray for x-y-z torchadjustment‣ Water-cooled or air-cooled modelsavailableMeinhard Glass Products700 Corporate Circle, Suite A Golden, Colorado 80401 USA1.800.MEINHARD 303.277.9776 Sales@meinhard.com www.meinhard.com

PC3 Peltier Cooler for Cyclonic Spray ChambersThe PC3 is a small, simple, and robust cooler for ICP-MS and ICP-0ES cyclonic spray chambers. The PC3 coolsthe outer walls of the cyclonic spray chamber to a constant temperature enhancing long-term signal stability,reducing polyatomic ion interferences such as oxides and reducing solvent loading especially when volatile organicsolvents are analyzed. The cyclonic spray chamber offers the advantages of low memory effects, fast rinse-outand, in many cases, higher sample transport efficiency.Create a part number by selecting the instrument model (zz), electrical outlet configuration (a), injector type (i),torch type (t), choose the mounting bracket (g), spray chamber material (d), auxiliary gas port (e), baffle (b), choosethe outlet for the ICP injector (u), and choose the nebulizer configuration (xx).Standard temperature settings are +2C/-5C. Any temperature settings can be accommodated. For custom settings,indicate the upper and lower settings after the part number using the following notation: [@T1@T2]Unless otherwise specified, PC3 Inlet System Kits will include one PFA-100 nebulizer and one PFA-ST nebulizer(xx = 21).PC3 Inlet System Kit ES-41zz-debu-aitg-xxPC3 Peltier Cooler (only) ES-4100Spray Chamber Options (debu)d = chamber material (normally 1 or 3)d = 1 quartz (High Purity)d = 2 polypropylened = 3 PFA (HF resistant)d = 4 glasse = auxilary port (mixed gas & organic solvents)e = 0 no aux. port (standard)e = 1 threaded aux. port, 1/4-28 (oxygen or make up gas)e = 2 aux. port, 2mm x 4 mmb = baffle typeb = 0 non-baffled (ICP-OES)b = 1 baffled (ICP-MS)u = outlet connector typeu = 1 ESI injector connection (straight connection)u = 7 TJA base torch connector (3/8" straight-tube outlet)u = 8 12/5 socket connectionu = 9 Perkin Elmer injector connection(e.g., connector for Ryton Spray Chamber)PC3 Kit Options (aitg)a = electrical outlet configurationa = 1 North America and Japana = 2 Europea = 3 UKa = 4 Chinaa = 5 Indiaa = 6 Australiai = injector typei = 0 No injectori = 1 ESI 1.5mm Quartzi = 3 ESI 1mm Quartzi = 2 ESI 2mm Quartzi = 4 ESI 1.8mm Sapphirei = 7 ESI 2mm Platinumi = 9 OEM Injectort = torch typet = 0 no torcht = 1 OEM Torcht = 2 ESI o-ring-free specifiedt = 3 ESI (o-ring specified)t = 4 One-piece quartzg = mounting bracket/ temperature settingsg = 0 standard without bracketg = 1 standard with bracketO-ring-free Teflon® PFA Cyclonic Spray ChamberMeinhard Glass Products700 Corporate Circle, Suite A Golden, Colorado 80401 USA1.800.MEINHARD 303.277.9776 Sales@meinhard.com www.meinhard.com

Apex High-Sensitivity SystemElemental Scientific has designed the new Apex family of high sensitivity and low backgroundsample introduction systems to increase signal intensity while often reducing relativebackground contamination for ICPMS and ICPAES analyses. The Apex improves sensitivityprimarily by increasing both sample transport efficiency and the quality of aerosol introduced tothe ICP instrument. The Apex controls background contamination by employing high-purity,inert, and o-ring-free wetted surfaces. When combined with a self-aspirating MicroFlow PFAnebulizer even aggressive and concentrated chemicals may be analyzed at very high sensitivityand very low contamination.Apex Q High-Sensitivity SystemThe Apex may be used with nebulizers operating over a wide range of sample flow rates from 20µL/min to over 1 mL/min. The nebulizers may be either self-aspirated or pumped.OperationLiquid samples are nebulized into a patent-pending spray chamber and desolvation system wherethe sample aerosol is efficiently conditioned to produce an intense and uniform aerosol that istransported to the ICP.When compared to conventional ICPMS sample introduction systems the Apex will typicallyincrease ICPMS sensitivity by approximately 10x when using a 300 µL/min nebulizer and byapproximately 3x when using a 100 µL/min nebulizer. These improvement factors are in spite ofthe lower Apex sample consumption rate. ICP-MS detection limits are in the sub-ppt to sub-ppqrange for most elements.ICPAES detection limits can be improved by up to a factor of 6-10 when operating at 1 ml/minusing a MicroFlow PFA or PolyPro ST nebulizer together with the Apex. Alternatively, thecombination of a low flow nebulizer with the Apex maintains ICP-AES sensitivity while reducingsample consumption by a factor of 5 to 10, improving ICP-AES determinations when the volumeof sample is limited.

ModelsThe Apex sample introduction system is available in four basic models: Apex E, Apex Q, ApexHF, and Apex IR.The Apex E has been primarily designed as an inlet system for ICP-AES. the Apex E is very simpleto use with only 1 switch operation and has a Pyrex flow path to produce a relatively low cost,high sensitivity inlet system. The Apex E is supplied with either PolyPro-ST of PFA-ST nebulizers.The Apex Q has an o-ring-free quartz flow path for high sensitivity and low background forsamples that do not contain hydrofluoric acid. The Apex Q gives the fastest rinse-out of any highsensitivity ICP introduction system. Two MicroFlow PFA nebulizers are included with the Apex Q.The Apex HF uses a high-purity PFA Teflon flow path to provide resistance to hydrofluoric acid.The Apex HF is recommended for many geochemistry and semiconductor applications wheresamples containing HF are analyzed. Two MicroFlow PFA nebulizers are included with the ApexHF.The Apex IR has a quartz flow path and includes the ApexAreo membrane desolvation modulefor reducing ICPMS spectral interferences that arise from solvent-derived polyatomic ions. ThreeMicroFlow PFA nebulizers: 50, 100, and 300 µL/min are included with the Apex IR.Performance DataThe patent pending design of the sample flow path ensures minimal memory effects with rinseoutscomparable if not faster than simple cyclonic systems, even with initial higher count rates.

Enhanced stability, which can be further improved with the use of the Apex IR or the addition ofthe ACM to the other Apex platforms.Improvements in sensitivity that can range from 3x to 15x depending on the sample flow rateused. The Apex is over 90% efficient at transporting the sample analyte to the plasma.Capable of running with high matrix samples such as 10% Urine, giving 3.2% rsd after 10 x 5 minsample replicates.

Membrane DesolvationAn optional ACM Nafion fluoropolymer membrane desolvation module is available to removeresidual solvent vapor in the sample aerosol stream. The ACM membrane module may be usedwith any of the ICP-MS Apex models. The membrane module is easily demounted for the Apexexit port. This feature allows the Apex to be used either with or without a membrane to best suitspecific analytical applications.ACM Membrane is easilyattached or detachedWith the ACM membrane desolvation module oxides and other ICP-MS interferences are furtherreduced. For example, CeO+/Ce+ was reduced to < 0.1% when using the Apex with membranedesolvation.The Apex is useful for many types of trace element determinations in diverse fields such asclinical, semiconductor, environmental, petrochemical, and many different research areas.Available from:Meinhard Glass Products700 Corporate Circle, Suite A Golden, CO 80401-5636Tel. 303.277.9776 Fax 303.216.2649 Email: sales@meinhard.com

Elemental Scientific Inc.New AutosamplersClean and fast!Clean, fast, flexible and small are some of the best terms to describe the new series ofautosamplers from Elemental Scientific. Excellent value is another.Developed as part of ESI’s cleanroom concept, these new autosamplers feature all-fluoropolymer constructionin the sample flow path for superior acid and solvent resistance. Sealed electrical components ensure a longlife. All mechanical and metal parts have been isolated below the sample rack table to prevent samplecontamination from wearing parts. ESI’s unique integrated autosampler probe design does away with tubingconnections that leak or come apart, while providing a rigid probe that does not require a guide, eliminatinganother common source of cross-contamination. The sampling arm moves between sample racks, not overthem, using linear/polar control to obtain simultaneous changes in X-Y coordinates. Both the SC2 series andthe SC14 series feature dual flow-through rinse stations – for two separate and constantly replenished rinsesolutions. ESI’s autosamplers are clean and fast.The SC2 series is a full-featured version with a small footprint that can suit virtually any laboratory. Standardrack sizes range from 96-well microtiter plates to 21-positions racks for 50 mL containers. The normalconfiguration has 10 standard positions, 2 rinse positions, and 4 rack positions. The software allows for themixing of rack sizes and custom layouts. An optional HEPA filter cabinet will prevent contamination fromexternal sources.Meinhard Glass Products700 Corporate Circle, Suite A Golden, Colorado 80401 USA1.800.MEINHARD 303.277.9776 Sales@meinhard.com www.meinhard.com

The SC14 series offers the highest sample capacity for unattended overnight runs, with the smallest persamplefootprint. Using conventional off-the-shelf racks, the SC14 can handle more than 1,200 samples.When equipped with microtiter plates, more than 2,900 samples can be handled. Major options include atraveling rinse station to reduce sample-to-sample time, a flow-injection rapid analysis unit to further reducesample-to-sample time, and a HEPA filter cabinet to exclude external contaminants.Competitively priced from $7,700 for theSC2 and $9,900 for the SC14, withindustry-leading performance andflexibility, these new autosamplers fromESI offer exceptional value.Custom solutions are available:Meinhard Glass Products700 Corporate Circle, Suite A Golden, Colorado 80401 USA1.800.MEINHARD 303.277.9776 Sales@meinhard.com www.meinhard.com

Perimax 12General Information1. Drive UnitIdentical drive units are employed in the Perimax 12 and Perimax16 pumps, which differ only in the pump head. A stepper motorensures that liquid transport is highly reproducible and constant.2. Remote controlSpeed and direction can be externally controlled (analog: 0-5 Vdcor digital: 26-2100 Hz) through a rear-mounted DB-9 plug.3. ApplicationsThe Perimax peristaltic pump is used in all branches of analyticalchemistry, especially where it is essential to supply a system withaccurately defined liquid quantities.• Analytical Instrumentation• Biotechnology, Bioanalytical Chemistry• Liquid Chromatography• Column Chromatography• ICP and AA Instrumentation• Liquid Transfer, Dosing, and Mixing• Laboratory and Production4. TubingPeristaltic pump tubing is manufactured from highly flexible plasticmaterials having a very precise internal diameter. Tubing isavailable in 19 different sizes from 0.19 mm to 3.18 mm insidediameter to provide a flow rate of 0.004 to 40 mL/min.5. Technical Data• Pump head with 12 rollers (Perimax 12) provides 1to 6 channels of liquid flow that is adjustable from0.004 ml/min to 40 ml/min; or• Pump head with 16 rollers phase-displaced(Perimax 16) for 1 to 3 channels of pulse-free liquidflow that is adjustable from 0.004 ml/min to 40ml/min.• Individually adjustable channels accommodate awide variety of tubing materials and sizes.• Speed range: 1 to 80 rpm, controlled by a ten-turnpotentiometer with digital readout.Meinhard Glass Products700 Corporate Circle, Suite A Golden, CO 80401 USA303.277.9776 sales@meinhard.com www.meinhard.com• High-speed key: temporarily overrides the setspeed for fast-flush of the pump tubing• Switch for off, or clockwise/anti-clockwise rotation• Power required: 115/230 Vac at 50/60 Hz, 70 W• Dimensions: 160x160x200 mm• Weight: 4 to 5 kg, depending on the number ofchannels6. OperationThe Perimax 12 peristaltic pump is very simple to operate. The pump tubing is placed around the pump head and securedat each end in a tubing retainer. Pressure against the tubing in each channel is adjusted with a fine screw on the pressurebracket. Function keys are provided for ON/OFF and RIGHT/LEFT rotation. The rotational speed of the pump head iscontinuously adjustable via a 10-turn potentiometer. The digital indicator (0-999) ensures a reproducible speed settingand, therefore, a precise flow rate. A high-speed key provides for brief operation at maximum speed, for example, toobtain fast wash-out of the tubing when changing to another liquid.Perimax 16 Antipuls Pump HeadThe 16-roller pump head consists of two half-channels of 8 rollers each in which the rollers are arranged with a 180-degree phase displacement. A piece of pump tubing is inserted into each half-channel; downstream from the pump head,a Y-fitting combines the half-channels. Consequently, a peak in one half-channel is cancelled by a trough in the parallelhalf-channel so that the combined flow produced is completely pulsation-free. The Perimax 16/2 can be operated with 2pulse-free channels, 4 pulsating channels, or one pulse-free and 2 pulsating channels. Also available are the Perimax16/1 and Perimax 16/3.Sets of pre-assembled pump tubing are available in a variety of sizes for the Perimax 16 Antipuls. A Y-fitting splits theflow between two half-channels; a second Y-fitting recombines the flows downstream.

Peristaltic Pump Flow Rates – for Perimax 12 – SM SeriesOrangeBlackOrangeRedOrangeBlueOrangeGreenOrangeYellowOrangeWhiteBlackBlackOrangeOrangeWhiteWhitei.d.Digit RPM mm 0.127 0.191 0.254 0.381 0.508 0.635 0.762 0.889 1.016 1.143in 0.005 0.0075 0.01 0.015 0.02 0.025 0.03 0.035 0.04 0.045000 1 0.0007 0.0021 0.0035 0.0091 0.0135 0.0210 0.0307 0.0439 0.0550 0.0630111 10 0.012 0.035 0.067 0.160 0.266 0.370 0.535 0.709 1.033 1.113222 19 0.023 0.068 0.130 0.312 0.518 0.719 1.040 1.374 2.012 2.164333 27 0.034 0.101 0.193 0.463 0.771 1.069 1.544 2.039 2.990 3.214444 36 0.045 0.134 0.256 0.615 1.023 1.418 2.049 2.704 3.968 4.264555 45 0.056 0.167 0.319 0.766 1.276 1.767 2.553 3.369 4.946 5.314666 54 0.067 0.199 0.382 0.917 1.528 2.116 3.058 4.034 5.925 6.365777 62 0.078 0.232 0.445 1.069 1.781 2.465 3.562 4.698 6.903 7.415888 71 0.089 0.265 0.508 1.220 2.033 2.814 4.067 5.363 7.881 8.465999 80 0.100 0.298 0.571 1.371 2.286 3.164 4.571 6.028 8.859 9.515RedRedRedGrayGrayGrayYellowYellowYellowBlueBlueBlueGreenGreenPurplePurplePurpleBlackPurpleOrangePurpleWhiteBlackWhiteDigit RPM 1.219 1.295 1.422 1.524 1.651 1.854 2.057 2.286 2.540 2.794 3.1750.048 0.051 0.056 0.060 0.065 0.073 0.081 0.090 0.100 0.110 0.125000 1 0.144 0.153 0.179 0.188 0.248 0.298 0.350 0.393 0.465 0.517 0.623111 10 0.655 0.697 0.824 0.874 0.994 1.314 1.543 1.802 2.072 2.364 2.776222 19 1.166 1.241 1.469 1.560 1.741 2.330 2.737 3.211 3.678 4.212 4.929333 27 1.678 1.784 2.115 2.246 2.488 3.346 3.930 4.621 5.285 6.059 7.082444 36 2.189 2.328 2.760 2.932 3.234 4.361 5.123 6.030 6.892 7.906 9.235555 45 2.700 2.872 3.405 3.619 3.981 5.377 6.317 7.439 8.498 9.754 11.388666 54 3.212 3.416 4.051 4.305 4.728 6.393 7.510 8.848 10.105 11.601 13.541777 62 3.723 3.959 4.696 4.991 5.474 7.409 8.703 10.258 11.712 13.449 15.694888 71 4.235 4.503 5.341 5.677 6.221 8.425 9.897 11.667 13.318 15.296 17.847999 80 10.848 11.536 13.684 14.546 15.926 21.579 25.349 29.888 34.114 39.186 45.714Meinhard Glass Products700 Corporate Circle, Suite A Golden, CO 80401 USA303.277.9776 sales@meinhard.com www.meinhard.com

The first non-pulsingPeristaltic PumpPerimax 16 - AntipulsPump headThis pump head has two groups of eightrollers, with the groups offset from eachother. The incoming flow is split between twopieces of peristaltic pump tubing, one runningover each of the roller groups, thenrecombined downstream from the head. Thewave peak in one tube coincides with thewave trough in the other tube so that peaksand troughs cancel each other. The resultingflow is therefore completely free frompulsations.The roller head has 16 rollers and providesfour half channels of 8 rollers each, with twophase-displaced tubes being combined. The16/4 pump can then be operated either with 2pulse-free channels or with 4 slightly pulsingchannels.• Pump head with 2 channels• Output continuously variable from 0.12 mL/min to 36 mL/min• Reproducible, constant output through optoelectronic speed control• Universal tubing holders for wide range of pump tubing types and sizes• Speed range 1 - 80 rpm, controlled by digital readout potentiometer• Fast-speed key• Switch for clockwise / counterclockwise rotation• Remote control ON / OFF, fast speed (option)• Interface between sample changer and pump for continuously variable wash time (Fast speed)

Meinhard Peristaltic Pump TubingMeinhard Part #Tube-PVCSD-05Tube-PVCSD-075Tube-PVCSD-10Tube-PVCSD-10-FTube-PVCSD-15Tube-PVCSD-15-FTube-PVCSD-20Tube-PVCSD-20-FTube-PVCSD-25Tube-PVCSD-30Tube-PVCSD-30-3Tube-PVCSD-30-FTube-PVCSD-35Tube-PVCSD-35-3Tube-PVCSD-35-FTube-PVCSD-40Tube-PVCSD-45Tube-PVCSD-45-3Tube-PVCSD-45-FTube-PVCSD-51Tube-PVCSD-56Tube-PVCSD-65Tube-PVCSD-69Tube-PVCSD-81Tube-PVCSD-90Tube-PVCSD-125Tube-SolFSD-30Tube-SolFSD-30-3Tube-SolFSD-30-FTube-SolFSD-35Tube-SolFSD-35-3Tube-SolFSD-35-FTube-SolFSD-45Tube-SolFSD-45-3Tube-SolFSD-45-FTube-SolFSD-51Tube-SolFSD-56Tube-SolFSD-81Tube-Viton-20Tube-Viton-30Tube-Viton-30-3Tube-Viton-35Tube-Viton-35-3Tube-Viton-40Tube-Viton-40-3Tube-Viton-45Tube-Viton-45-3Tube-Viton-51Tube-Viton-81Tube-Viton-81-3ALL TUBING - PACK OF 12 PIECESSTOCK SIZESDescriptionPVC 2-Stop Tubing 0.005" Orange/BlackPVC 2-Stop Tubing 0.0075" Orange/RedPVC 2-Stop Tubing 0.010" Orange/BluePVC 2-Stop Tubing 0.010" Orange/Blue, Flared both endsPVC 2-Stop Tubing 0.015" Orange/GreenPVC 2-Stop Tubing 0.015" Orange/Green, Flared both endsPVC 2-Stop Tubing 0.020" Orange/YellowPVC 2-Stop Tubing 0.020" Orange/Yellow, Flared both endsPVC 2-Stop Tubing 0.025" Orange/WhitePVC 2-stop tubing 0.030" Black/BlackPVC 3-stop tubing 0.030" Black/BlackPVC 2-stop tubing 0.030" Black/Black, Flared both endsPVC 2-stop tubing 0.035" Orange/OrangePVC 3-stop tubing 0.035" Orange/OrangePVC 2-stop tubing 0.035" Orange/Orange, Flared both endsPVC 2-Stop Tubing 0.040" White/WhitePVC 2-stop tubing 0.045" Red/RedPVC 3-stop tubing 0.045" Red/RedPVC 2-stop tubing 0.045" Red/Red, Flared both endsPVC 2-stop tubing 0.051" Gray/GrayPVC 2-Stop Tubing 0.056" Yellow/YellowPVC 2-Stop Tubing 0.065" Blue/BluePVC 2-Stop Tubing 0.069" Blue/GreenPVC 2-Stop Tubing 0.081" Purple/PurplePVC 2-Stop Tubing 0.090" Purple/BlackPVC 2-Stop Tubing 0.125" White/BlackSolventFlex 2-Stop Tubing 0.030" Black/BlackSolventFlex 3-Stop Tubing 0.030" Black/BlackSolventFlex 2-Stop Tubing 0.030" Black/Black, Flared both endsSolvent Flex 2-Stop Tubing 0.035" Orange/OrangeSolvent Flex 3-Stop Tubing 0.035" Orange/OrangeSolvent Flex 2-Stop Tubing 0.035" Orange/Orange, Flared both endsSolventFlex 2-Stop Tubing 0.045" Red/RedSolventFlex 3-Stop Tubing 0.045" Red/RedSolventFlex 2-Stop Tubing 0.045" Red/Red, Flared both endsSolventFlex 2-Stop Tubing 0.051" Gray/GraySolventFlex 2-Stop Tubing 0.056" Yellow/YellowSolventFlex 2-Stop Tubing 0.081" Purple/PurpleAcidflex/Viton 2-Stop Tubing 0.020" Orange/YellowAcidflex/Viton 2-Stop Tubing 0.030" Black/BlackAcidflex/Viton 3-Stop Tubing 0.030" Black/BlackAcidflex/Viton 2-Stop Tubing 0.035" Orange/OrangeAcidflex/Viton 3-Stop Tubing 0.035" Orange/OrangeAcidflex/Viton 2-Stop Tubing 0.040" White/WhiteAcidflex/Viton 3-Stop Tubing 0.040" White/WhiteAcidflex/Viton 2-Stop Tubing 0.045" Red/RedAcidflex/Viton 3-Stop Tubing 0.045" Red/RedAcidflex/Viton 2-stop Tubing 0.051" Gray/GrayAcidfelx/Viton 2-stop Tubing 0.081" Purple/PurpleAcidfelx/Viton 3-stop Tubing 0.081" Purple/PurpleTube-Antipuls16-30Tube-Antipuls16-51PVC 2-Stop Tubing 0.030" Black/BlackPVC 2-Stop Tubing 0.051" Gray/Gray

Laminar FLOW BOX BasicPortable Cleanroom TechnologyGrowing product quality and reliability requirements are making itincreasingly necessary to manufacture or process products in particlefreeconditions these days. Cleanroom technology has come to play animportant role in practically all high-tech sectors, including chemicalproduction, biotechnology, genetic engineering, microelectronics, theoptical industry, precision engineering and the food, filling andpackaging industries. For this reason, cleanrooms have becomestandard in many branches of production, but entail high costs in termsof installation and operation.In developing the Laminar FLOW BOX Basic, Spetec ® made it its goal toproduce a simple and inexpensive solution for virtually particle-freeworkspaces. The result of our efforts, the Laminar FLOW BOX Basic, isa portable cleanroom that can be manufactured according to individualsize requirements. No matter whether you wish to protect analysissamples from contamination or need dust-free conditions for otherapplications, the Spetec ® Laminar FLOW BOX Basic represents acleanroom workstation that can be adapted to your specific wishes andrequirements.The Spetec ® Laminar FLOW BOX Basic features a filter equipped with an HF-type laminar air flow director offering99.995% dust collection efficiency. In other words, the filter screens out at least 99.995% of all particles measuring 0.5µm in size, or larger, and at least 99.95% of all particles measuring 0.21 µm. The flow velocity of the Spetec ® LaminarFLOW BOX Basic is 0.45 m/sec. as tested and certificated by the Fraunhofer Institute for Production Engineering andAutomation in Stuttgart, complete with all other technical details.Model designation:Test parameters:Type of testing:Spetec ® Laminar FLOW BOX BasicOperation of the Laminar FLOW BOX Basic in a test environment featuring aparticulate aerosol in a class 10,000 cleanroom(pursuant to the US Federal Standard 209E)Random particle measurement at representative placesTest findings/classification: The Spetec ® Laminar FLOW BOX Basic has an isolation factor of < 10 3Applied standards/regulations:US Federal Standard 209ETest parameters of the cleanroom environment: Class 10,000 cleanroom (pursuant to the US Federal Standard 209E)The measuring devices used in the testing are regularly calibrated and comply with national and international standards. In cases in which nationalstandards do not exist for the testing procedure, it is performed according to current technical regulations and standards.The documentation drawn up in connection with the testing procedure can be provided upon request.Test application: Operation of the Laminar FLOW BOX Basic in a cleanroom of the 100,000 airborne particulate cleanliness class (pursuant to the USFederal Standard 209E).Maximum ambient concentration of particles ≥ 0.5 µm/ft 3 : 100,000.Maximum concentration of particles ≥ 0.5 µm/ft 3 in the Laminar FLOW BOX Basic: 100.

Laminar FLOW BOX BasicPortable Cleanroom TechnologyModel FBS-V-37Laminar flow module with vinyl curtainModel FBS-37With optional frame base/cabinetModel EFBS-V-37Laminar flow module with vinyl curtainand exhaust

Aerosol-to-LiquidParticle eXtractionSystem (ALPXS)*A new device developed at Savannah RiverNational Laboratory collects and concentratesairborne metals into a liquid sample foronsite/real time or laboratory analysis. Useful asa tool for coupling ICPMS/OES to airborne particleanalysis, the ALPXS can offer near real timesampling and analysis of welding fumes,workplace exposure measurement, orenvironmental metal particle monitoring. Thedevice is portable and consumes only 12 watts ofpower.Uses wet electrostatic precipitation to separateparticles from air.Collection efficiency is greater than 90% forparticles less than 0.3 micrometers in diameter.Particles in air are drawn through the ionizationchamber at a flow rate of between 200 and 300LPM.Ionization chamber charges particles at 8000volts.Particles are collected in a liquid reservoir with avolume of 10 - 200 mL.Liquid continuously washes collection electrode togather particles during the measurement.Collection Efficiency versus sampling air flow rate.Now, for the first time, you can potentially measure metal concentrationsapproaching picogram per cubic meter levels, or lower.Comparison with OSHA PEM for Lead (Pb) ExposureDevice Sampling Total Air PbTime, hr Volume, m 3 ug/m 3ALPXS 0.8 14.4 4.8OSHA PEM 2.5 0.3 2.7* Analysis for Pb by ICPOES*U.S. Patent 6955075, Washington Savannah River Company LLC

Aerosol-to-Liquid Particle eXtraction System - ALPXSPrinciple of OperationAir is drawn into the ionization chamber.Particles assume a negative charge.Collection electrode is maintained atpositive high voltage and particles areattracted to it.As the particles migrate towards thecollection electrode they are trapped bythe liquid layer that continuously washesthe surface of the collection electrode andaccumulate.An auxiliary pump transports a very smallfraction of the reservoir volume to anICPMS, ICP-OES or AA for determination ofmetal species in the liquid.Technical SpecificationsFootprint: 8” x 8” with chimney height23” (approx).Power requirements: 12vdc @ 1.25A,battery or converter.Air intake flow rate: 200-300 LPMIonization voltage: 0-10kV, adjustable.Liquid reservoir volume: 20-100 mLs.Duty cycle: Continuous.ALPXS is a 2003 R&D 100 Award WinnerMeinhard Glass ProductsA Division of Analytical Reference Materials International Corporation700 Corporate Circle, Suite A, Golden, CO 80401Tel: (303) 277-9776) Fax: (303) 216-2649Email: Sales@Meinhard.com Web: www.meinhard.com

ANALABTel: +33 (0)3 88 51 79 51 Fax: +33 (0)3 88 51 79 13E-mail: analab@wanadoo.fr Web: www.analab.frEVAPOCLEANPatentedEvapoclean 6.25.R1 with programmable temperature controllerCLOSED-ENVIRONMENT ENVIRONMENT forEVAPORATION, PRECONCENTRATION,DISSOLUTION, ACID DIGESTIONDeveloped at the Institute of Physics of the Earth (Paris, France), the primary function of the EVAPOCLEAN isto preconcentrate various chemical solutions under controlled conditions. Evaporation (at temperatures upto 250 °C) and immediate condensation occur in a closed system that does not exchange with laboratoryair.The EVAPOCLEAN device allows the analyst to process organic solvents, aqueous solutions, acidic andalkaline solutions, and concentrated solutions which derive from the dissolution of various materials withaggressive reagents (HF, HCl, HBr, HNO 3, HClO 4, H 2S0 4, H 2O 2, NH 4OH). Applications include rawmaterials (rocks, minerals, ores, natural waters), industrial and advanced materials (cements, metals, glassproducts, ceramics), as well as basic chemicals for industry, highly pure chemicals, and liquid and solidwastes.EVAPOCLEAN devices are also designed for trace and ultra-trace element analyses which require acleanroom environment. Evaporation-condensation cells are made with non-contaminating, corrosionresistant,high-purity grade fluoropolymer materials, machined under controlled conditions. They do notemit dust particles.Depending on the EVAPOCLEAN model that is chosen, 1 to 12 samples can be processed simultaneously orindependently, without risk of cross-contamination. It is possible to evaporate to dryness or to leave a smallresidual volume of the evaporating liquid, to concentrate solutions, and to purify liquid reagents.The top face of EVAPOCLEAN devices is equipped with ports to allow acid digestion of samples andcleaning of jars by reflux of acid vapor or water vapor in the closed container.The basic EVAPOCLEAN incorporates a simple controller which raises the block temperature to a specifiedtemperature and holds the temperature for a specified period, after which the EVAPOCLEAN will cool toambient temperature. An optional programmable controller stores up to four programs of sixteensegments each.

EVAPOCLEANEV-EVAPO.6.25.RNPModel 6.25ml: the hot block is equipped with 6 ports (side) for evaporation-condensation in 17 ml or 33 mlvessels (evaporation of less than one milliliter volumes down to microliter volumes is achieved with small ormicro containers) and 14 ports (top) for sample digestion and vessel cleaning. Includes: hot block, 6 highpurity PTFE elbows, 12 SAVILLEX® PFA vessels (size at your convenience), basic regulator (up, hold, down).DIM: 370mm x 110mm x 171mm (h) Weight: 12 Kg Current: 220V/115VEV-EVAPO.12.25.RNPModel 12.25ml: the hot block is equipped with 12 ports (sides) for evaporation-condensation steps in 17 ml or33 ml vessels (using small or micro containers identical to Model 6.25 ml) and 18 ports (top) for sampledigestion and vessel cleaning. Includes: hot block, 12 high purity PTFE elbows, 24 SAVILLEX® PFA vessels(size at your convenience), basic regulator (up, hold, down).DIM: 370mm x 190mm x 171mm (h) Weight: 20 Kg Current: 220V/115VEvapoclean 12.25EV-EVAPO.6.125.RNPModel 6.125ml: the hot block is equipped with 6 ports (side) for evaporation-condensation steps in 60, 90 or180 ml vessels, and 14 ports (top) for sample digestion and vessel cleaning. Includes: hot block, 6 high purityPTFE elbows, 12 SAVILLEX® PFA vessels (size at your convenience), basic regulator (up, hold, down).DIM: 540mm x 160mm x 217mm (h) Weight: 30 Kg Current : 220V/115VEV-EVAPO.12.125.RNPModel 12.125ml: the hot block is equipped with 12 ports (side) for evaporation-condensation steps in 60, 90or 180 ml vessels, and 28 ports (top) for sample digestion and vessel cleaning. Includes: hot block, 12 highpurity PTFE elbows, 24 SAVILLEX® PFA vessels (size at your convenience), basic regulator (up, hold, down).DIM. : 540mm x 290mm x 217mm (h) Weight: 60 Kg Current : 220V/115VA programmable controller (4 programs,16 segments) is available.

EASYDIGESTANALAB has designed EASYDIGEST devices for wet digestion or wet extraction of samplesusing mineral acids. These acid-resistant graphite-filled-PFA monoblocks include up to 48positions and provide controlled and homogeneous heat to the sample batch. Temperaturecontrol is achieved either with a set-point power regulator or with a programmable controller (4programs, 16 segments each).Standard housings accept 60ml SAVILLEX ® Teflon ® PFA jars or 120ml polypropylene (PP)containers. The 60ml housings accept 7 mL, 17 mL, 24 mL, 33 mL and 64mL SAVILLEX ® jars byaddition of acid-resistant graphite-filled-PFA adapters (sold separately). Custom housings canbe manufactured to suit your containers. (Sample stirring is in development).ED-EASY24/60ML-RPThis model has 24 positions for 60 ml SAVILLEX ®jars and a programmable temperature controller (4programs, up to 16 segments each)306mm x 214mm x 110mm (h) Weight: 15 KgMains: 220 V or 110 VED-EASY24/60ML-RNPThis model has 24 housings for 60 ml SAVILLEX®jars with set-point temperature controller306mm x 214mm x 110mm (h) Weight: 15 KgMains: 220 V or 110 VED-EASY48/120mL-RNPThis model has 48 positions for 120 ml PPcontainers with set-point temperature regulator590mm x 450mm x 70mm (h) Weight: 40 KgMains: 220 V or 110 VED-EASY48/120mL-RPThis model has 48 positions for 120 ml PPcontainers and a programmable temperaturecontroller (4 programs, up to 16 segments each)590mm x 450mm x 70mm (h) Weight : 40 KgMains: 220 V or 110 VOptions:Volume Detection: ED-DETECT.NIVEAU allows the analyst to control and to fix the volume reductionduring evaporation. Lead time: 4 weeks.In-situ Temperature Monitor: ED-TEMP.IN.SITU monitors the temperature of a reference solution ratherthan the monoblock temperature. Lead time: 4 weeks.Container Adapters: Graphite-filled Teflon ® PFA machined to adapt smaller containers to either the 60 mLor 120 mL Easydigest system.ANALAB sarl23 route de la Wantzenau, BP 40141 Hoenheim67804 Bischheim cedex, FranceMeinhard Glass Products700 Corporate Circle, Suite A Golden, Colorado 80401 USA1-800-MEINHARD Sales@meinhard.com www.meinhard.com

ANALABTél: +33 (0)3 88 51 79 51 Fax: +33 (0)3 88 51 79 13E-mail : analab@wanadoo.fr Web : www.analab.frMINI VESSEL CLEANERAnalysis for trace and ultra trace species requiresappropriate cleaning of sample vessels.How does it work ?Vapor rises from the bath and condenses on the vessels;droplets carrying impurities return to the acid bath.containersAcid bathPTFE supportvapor dropletsAcid-resistant Hot PlatePrinciple:Cleaning is accomplished byconvection and condensationof high purity acid vapors.The process offers a veryhigh level of purity thatcannot be obtained byimmersion in a bath.This mini vessel cleaner isideal for the cleaning ofcontainers and accessories inPFA, PTFE…Requires just a smallquantity of reagent.Adaptable to many sizes andshapes of vessels.The Mini Vessel Cleaner:• has no metallic parts.• can be used on any hot plate.

CleanAcids ®PatentedPURIFICATIONThe Cleanacid allows you topurify your reagents (acid andalkaline solutions, organicsolvents) by sub-boilingdistillation. For ultra-traceanalysis, purification of thesereagents just before sampleprocessing reduces oreliminates contaminationwhich may occur during weeksor months of storage.SIMULTANEOUS PROCESSINGof up to 12 vessels with volumesof 25mL, 125 mL and 1Liter,depending on the model.CLOSED ENVIRONMENTprotects your staff andlaboratory against corrosivevapours. It reduces youroperating costs while avoidingany investment in vapourneutralization system, scrubbersand pumps.ACID INERT• All surfaces are covered with Teflon• Cups are made of Teflon PFA, elbows of high quality PTFE• The 1.7 m cable between the temperature controller and the heating blockallows the controller to be placed outside the corrosive area

Technical DataCleanacidModels:Voltage:1 position for purification of 1 Liter3, 6 or 12 positions for purification of 25 mL or 125 mL (with 6, 12 or 24 positionsfor mineralization)Includes 1, 3, 6 or 12 elbows and corresponding 33 mL,180 mL, 2 L vesselsthermal protection230 Volts (100-110 Volts upon request)Temperature: Ambient to 235°CUniformity +/- 2°C3 over temperature protections (available)Material:Hot block: PFA coated graphiteVessels: PFAElbows: high quality PTFETemperature controllerModels:Voltage:basic up/down (RNP)programmable: 4 programs of 16 segments (RP)These 2 models can be equipped with an additional screen for monitoring of thein situ temperature or a recording device Easylog (please consult us).230 Volts (100-110 Volts upon request)OptionsIn situ probe for monitoring vessel temperature, to be used with the suitable controllerCovers for cleaning of the PFA vesselsStand for elbowsCooling system to improve the rate of condensation and reagent production by up to 3-foldAcid inert pump to feed the acid (1 liter model )Products manufactured by analabSubject to technical changesCertification: CEM 89/336/CEE LVD 73/23/CEE EN 61010Warranty: 1 year on electrical/electronic parts, 2 years on defects in constructionanalabwww.analab.euEmail: analab@wanadoo.frTelephone: +33 (0)3 88 51 79 51Fax: +33 (0)3 88 51 79 1323 route de la WantzenauBP 40141, Hoenheim67804 Bischheim, FRANCEMeinhard Glass Productswww.meinhard.comEmail: sales@meinhard.comTelephone: 303.277.9776Fax: 303.216.2649700 Corporate Circle, Suite AGolden, Colorado 80401USA

THE LEADER IN “APPLICATION-SPECIFIC”CERTIFIED REFERENCE MATERIALSIARMSINTERNATIONAL ANALYTICALREFERENCE MATERIALS“Application-Specific” means just that, IARMs thatare readily available in the physical forms necessary tosupply the calibration needs of your laboratory. In additionto our original thin disks for X-ray methods, allCRMs are available in physical forms tailored to yourspecific applications; thick solid disks for Optical Emissionand Glow Discharge spectrometry, and chips for wetchemical or solution instrumental techniques (ICP, AA,etc.). Also, for combustion analysis, chips are availableto analyze carbon and sulfur.E-MAIL: SALES@ARMI.COMWEB: WWW.ARMI.COMTELEPHONE: (303) 216-2621FAX: (303) 216-2649700 CORPORATE CIRCLE, SUITE AGOLDEN, CO 80401USAIN THE US AND CANADA CALLOR FAX TOLL FREETELEPHONE: (800) 421-9454FAX (800) 421-1445

CELEBRATING EXCELLENCE SINCE 1984Analytical Reference Materials International’s (ARMI) primary objective hasbeen to develop and implement an industry acceptable system for the characterizationand certification of metal alloy materials. The resulting Certified Reference Materials(CRMs) afford the scientific community an unequivocal level of confidence.Equally important is our desire that the final certified results be traceable to nationaland/or international certifying bodies with emphasis on our own National Instituteof Standards & Technology (NIST).In the beginning, the Company purchased metal certified materials from recognizedcertifying bodies and produced what is now known the world over as the “thin X-raydisk” specific to X-ray analytical procedures. Because of the success of the thin X-ray disks during the late 1980s, demand dramatically increased for more of a varietyof products to address the needs of all analytical techniques. The Company reached apoint where it became obvious that its dependence on others to supply materials anddata limited its ability to meet the market’s existing and future needs. Therefore, in1989 the ARMI Inter-Laboratory Analysis Program (ILAP) was formed.The ILAP originated and remains today as the only totally voluntary organizationin private industry dedicated to the production and development of qualityCRMs. ILAP is the classic example of industry working together for a commongoal. The membership now consists of experts from over 70 laboratories representingmajor metal producers, commercial laboratories, aerospace, and general industryfrom the US, Canada and other countries in Europe and Asia. The group is comprisedof wonderfully dedicated people who are experts in the analysis of metals andmetal alloys.Today ARMI’s inventory consists of more than 600 different CRMs that include carbonsteels, low alloy steels, stainless and high temperature steels, nickel, cobalt, copper,aluminum, titanium, and hydrocarbon based materials. ARMI’s CRMs (IARMs)can be found in the application laboratories of most of the major instrument manufacturersaround the world.Finally, one of the major factors contributing to the success of the ARMI/ILAP programover the years has been “you”, the analytical consumer. You have voiced youropinions as well as your needs. The personnel at ARMI, as well as the ILAP members,wish to sincerely thank you for your continued suggestions and support and offerour pledge to enthusiastically make every effort possible to respond to yourneeds in the years to come.

Pittcon 2009 – New Products – Featured ProductsEasySeal Spray Chamber Inlet – Secure, Clean, EconomicalFit Kit 3T – Solution Inlet or Spray Chamber DrainIncluded With Every NebulizerLaser Ablation Gas Mixing ChamberStandard and Flared-end PeristalticPump TubingMeinhard Glass Products is a division of Analytical Reference Materials International, 700 Corporate Circle, Suite A, Golden, Colorado 80401 USATel: 303.277.9776 Fax: 303.216.2649 Web: www.meinhard.com Email: sales@meinhard.com

Pittcon 2009 – New Products – Featured ProductsALPXS – Aerosol-to-Liquid Particle Extraction SystemElectrostatically extracts airborne particulates into liquid for rapid sampling and analysis.Prodigy DC Arc SpectrometerA dramatic improvement to the classic technique for direct analysis of solids.Meinhard Glass Products is a division of Analytical Reference Materials International, 700 Corporate Circle, Suite A, Golden, Colorado 80401 USATel: 303.277.9776 Fax: 303.216.2649 Web: www.meinhard.com Email: sales@meinhard.com

Meinhard Glass ProductsA Division of Analytical Reference Materials International700 Corporate Circle, Suite A Golden, Colorado 80401 USA1.800.MEINHARD 303.277.9776 Sales@meinhard.com www.meinhard.com