Connector Tooling Guide - AeroElectric Connection

PNEUMATICCRIMP TOOLS®DANIELSMANUFACTURINGCORPORATIONThe DMC Power Crimp toolsWA27F, WA22P and WA22 are directequivalents of their correspondinghand tools. They use the same turretheads or positioners, the gages andother accessories. As productionneeds grow, all that needs to beadded is the tool frame itself. Theresulting power capability can inmany instances compare with anautomated system costing thousandsof dollars more.These pneumatic tools are widelyused in both military and proprietaryprograms. Their popularity has comeabout in part because of theirunequaled reputation for trouble-free,dependable service and their costsaving and adaptability.Whether upper, middle or lowerrange, the power tools fulfill the sameprecise crimp requirements as thehand models. They use the sameindenter configuration, the same gagingdimensions and selector settings.No additional operator training isnecessary. Accurate calibration ismaintained by a unique 8 stepmachined steel block that holdsgaging tolerances far longer than theusual adjustment screw method. Thissolid gaging means high output withless downtime.The compact size and light weightof these tools allows them to be usedeasily as hand tools, as well as highproduction bench tools. The handtrigger is designed for equal ease ofuse by right or left handed operators.Bench mounted, the optional footvalve allows hands-free operation. Thebench mount will allow the tool to besecured at virtually any angle for individualcomfort, thereby minimizingoperator fatigue.The foot valve, when installedin-line with an air supply, makes aportable system which is adaptable toany work bench. Air supply requirementsare 80-120 PSI (5.5 to 8.0atmospheres) clean dry air. The systemuses standard air fittings readilyavailable in most shops.UPPER RANGE WA27F(EQUIVALENT TO AF8)accommodates TH-XXXMIL-STDheads. TH-XXX series turret heads orTP-XXX series positioners, length 10″,diameter 2 3/4″, weight 50 oz.MIDDLE RANGE WA22P(EQUIVALENT TO MH860)accommodates 86-XXX seriespositioners, length 8″, diameter 2 1/4″,weight 32 oz.LOWER RANGE WA22(EQUIVALENT TO AFM8)accommodates K series positioners,length 8″, diameter 2 1/4″,weight 32 oz.BENCH MOUNT BM-2FOOT VALVE WA10PAGE 8© COPYRIGHT 2003 DANIELS MANUFACTURING CORPORATION