TRILUX supply systems for intensive care units

30ı31IS 200• Minimal footprint with wide variety of equipmentoptions and ergonomic layout of theintensive care unit.• The four vertical faces of the column may befitted out with electrical and medical gassupply outlets on an individual needs basis.• The IS 200 with its free-standing configuration,wide variety of possible electrical andmedical gas supply elements and theflexible use of rotating equipment carriersform the basis of an optimum ergonomiclayout for the intensive care unit.• Optionally one or two arms, each pivotable ina range from –15° to + 45°, can accommodateequipment carriers that rotate 360°. Theposition of the equipment carriers on thearms may be adapted as required.• Where ever fitted in the room, the installationsystem may be equipped with supply linesfor– Electrical devices– Communications technology– Patient monitoring– Medical gases and vacuum– Equipment monitoring, e.g. infusionpumps and syringe drivers– Anaesthetic gas extraction depending onthe room types of the intensive care unitand the individual requests of the user.• The equipment carriers, consist of a ruggedcast aluminium cross-arm and two stainlesssteel tubes, Ø 38 mm, are designed for aload of up to 100 kg. A wide variety ofmedical devices, shelves, poles, compactrails and other commercially availableaccessories can be mounted on the verticalstainless steel tubes, allowing the mountingof equipment, examination lights, storageareas for utensils.• Other useful accessories are available likedrawers, pull-out writing surfaces andmonitor arms.15°45°360°15°45°360°Equipment carriers may easily be positionedas needed at the hospital bed.An IS 200 with two wide equipment carrierscan serve two incubator spacesAn IS 200 with a narrow and a wide equipmentcarrier is designed to serve a hospital bed.For the entire programme, including equipmentcarriers, poles, shelves, etc., please consult ourseparate accessories catalogue.