Download - Can-Am Instruments Ltd.

IndexWhy Measure Viscosity...................................4Laboratory: with software descriptionsDV-II+Pro Viscometer.............................6DV-I Prime Viscometer...........................8DV-E Viscometer................................... 10Dial Reading Viscometer.................... 11Cone & Plate, Wells/Brookfield........ 12CAP 2000+ and CAP 1000+.............. 14DV-III Ultra Rheometer....................... 16PVS Rheometer..................................... 18R/S Plus Rheometers........................... 20R/S-SST Rheometer.............................. 23YR-1 Rheometer.................................... 24KU-2 Viscometer................................... 26Temperature ControlWater Baths............................................ 27Thermosel............................................... 30AccessoriesSmall Sample Adapter........................ 32Enhanced UL Adapter......................... 34Helipath Stand...................................... 36Vane Spindles........................................ 37Adapters (DIN, Spiral).......................... 38Spindles, Cups, Chambers................. 39Quick Connect....................................... 43Instrument Stands............................... 44Ball Bearing & EZ-Lock Options....... 44Protective Covers................................. 45Torque Decals........................................ 45Viscosity Standards.............................. 46Texture AnalyzerWhat is Texture Analysis?................... 48CT3 Texture Analyzer.......................... 50Brookfield SystemsStarch........................................................ 52Chocolate................................................ 52Paints/Coatings/Ink............................. 53Asphalt..................................................... 53Personal Care Products...................... 54Electronics Paste................................... 55Pharmaceutical..................................... 55Petroleum............................................... 56Dairy Products....................................... 57Adhesives................................................ 57Sauces & Dressings.............................. 58Construction Materials....................... 58ProcessWhy Process?......................................... 59AST-100 Viscometer Series................ 60TT-100 Viscometer Series.................. 62TT-200 Viscometer Series.................. 64Probe Viscometer Series.................... 65Viscosel Series (VTE & VTA)............... 66Accessories............................................. 68GeneralTesting & Consulting Services.......... 69Calibration and Certification............ 70IQ, OQ, PQ................................................ 70Education................................................ 71Glossary................................................... 72Dealers..................................................... 73To our customers,THIS CATALOG IS SPECIAL! It highlights the fact that 2009 is the75th year that Brookfield has been in business. By any measure wehave been and are successful in what we do, which is to supply highvalue instrumentation and service to our customers.But it is a mistake to laud ourselves for our success to date. Itis more important to realize what factors allowed Brookfield togrow and thrive for the last 75 years, and to make certain thatwe continue the programs and attitudes and principles that havegiven Brookfield such an enviable position throughout industry andthe world. Offering products that customers need at the levelof quality they expect, developing new products and accessoriesbased on customer feedback and market requirements, andcontinuously improving our after sales support through superiorservice and training, all with an attitude of low cost and high valueto our customers.We recognize that it is our customers who have made Brookfieldsuccessful, and continued success depends solely on protectingand expanding our customer’s satisfaction with Brookfield. In2008 we acquired a company whose products we have been sellingfor 10 years, thereby allowing us to provide faster response andbetter service for our successful RS Rheometer product line. Weare expanding into other fields, such as texture, with products thatprovide high performance at very competitive pricing. We continueto develop and improve our existing product line to meet the needsthat arise from the modern industrial environment.It is our hope, our expectation, that by continuing to do thesethings, which historically have allowed Brookfield to grow and togain our reputation as a top tier supplier, we will be able to proudlyannounce our 100th year and beyond with the same satisfactionand commitment as we now recognize our 75th anniversary.David Brookfield,PresidentT: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Celebrating 75 Years!1934-1958 - The first 25 years“I can make a better one than that!”said a young, confidentDonald Brookfield, Sr. in1933 to his father whileaccompanying him to alaboratory supply house tolook at viscometers for theirsynthetic resin businessventure. And with thisunpredictable statement fromthe recent MIT graduate, ourhistory began.Don went home and beganexperimenting with motorsand springs in the basementof his family’s home. It wasn’t as easy as he thought it wouldbe while at the laboratory supply house with his dad, but Donfound the work challenging, he enjoyed it, and he was goodat it. Don envisioned a different viscometer than what wasconventional at the time and began experimenting with othermaterials that would ultimately produce his first viscometer.This original, single-speed instrument would later developinto what is now known as “the world standard” in viscositymeasurement and control.Business began slowly, but it built at a steady pace as wordof the instrument’s quality — and its inventor — began tospread. Don’s practice of exchanging older units with newand improved ones at no charge was unheard of, and ofcourse, well received. As Don later said, “This gave us greatcredibility…or maybe they just thought we were crazy!”.A few years after the business began to pick up, war brokeout. Brookfield, like many manufacturers of the time, puttheir main business on hold in order to contribute to the WWIIeffort. Although it was necessary to shift the priority fromviscometers to war components, Don felt privileged to helpout any way he could, and in later years, was very proud of thecontribution Brookfield had made.After the war, Don was able to return full-time to developmentby improving on the original single-speed design bydeveloping a two-speed model, then a four-speed, and later,an eight-speed. The instrument continued to evolve over theyears into the multi-speed electronic drive model that is still inproduction today.1959-1983 - The next 25 yearsDon remained true to his original vision of “the highest qualityat the lowest possible price” by developing other significantchanges to the instruments themselves and, also, by creativelyextending their range and uses. Over the next 25 yearsBrookfield continued to address issues of temperature control,the ability to measure small sample volumes, and the needto measure very low viscosities by inventing a wide range ofaccessories to compliment the various model viscometers thathad been engineered over the years. Temperature controldevices, adapters, mixers, and stands were designed to expandthe versatility of Brookfield’s original — and newly developeddigital — line of viscometers. Brookfield also responded torequests by customers to measure continuously in productionby developing a complete range of shear rate defined in-lineProcess Viscometers.What was once a small, application-specific instrumentcompany was now becoming a globally-important resourcein such industrial areas as asphalt, adhesives, biological fluids,chemicals, drilling fluids, foods, paints, personal care products,polymers, etc. During this period, his son, David, joined thecompany and helped to develop the companies’ productand reputation further. The Brookfield Viscometer beganappearing in standards all over the world — and still continuesto be a force in most major industrial applications.1984-2009 - The past 25 yearsTechnology began progressing at an alarming rate, continuallyknocking on the doors of conventional instrumentation.Brookfield answered each call by producing a wide range ofdigital and programmable viscometers and rheometers thatwould operate in stand-alone mode or could be remotelycontrolled by a PC and software. Greater measurementcapabilities would allow customers the ability to perform avariety of testing methods, from simple centipoise readingsto high end shear rate/shear stress calculations. To meetthe needs of the increasing number of customers usingcontinuous viscosity measurement in the automation of theirproduction control, Brookfield expanded its line of processinstruments to include viscosity sensors with no moving partsand no need for field calibration.Brookfield also branched into new areas by adding our firstTexture Analyzer to the product mix. These instrumentsprovided the perfect compliment to our line of R&D and QCtesting instrumentation as it imitated many human testingconditions that a traditional viscometer cannot offer.Don passed away in 2004 but Brookfield Engineeringcontinues to honor his legacy by supplying products of thehighest quality and value with the best service…and of course,by always thinking ahead—of advancing the technology,to find ways of making viscosity measurement and controlinstrumentation even “better.”

Why measure viscosity?The ability to gather data on a material’s viscosity behavior givesmanufacturers an important “product dimension.” Knowledge ofa material’s rheological characteristics is valuable in predicting itspourability, its performance in a dipping or coating operation, orthe ease with which it may be handled, processed, or used. Theinterrelation between rheology and other product dimensionsoften makes the measurement of viscosity the most sensitive orconvenient way of detecting changes in color, density, stability,solids content, and molecular weight.Why Choose Brookfield?Ease of use, flexibility, reliable performance andquality of service have made Brookfield Viscometersfavorites all over the world. All Brookfield Viscometersare accurate within ±1.0% of the range in use andhave a reproducibility within ±0.2%. Test results canbe duplicated anywhere in the world when the samemodel instrument is used.PriceChoices for InstrumentationThis chart shows the Brookfield family of Laboratory Viscometersand Rheometers at a glance. This will help to give you a general ideaof what is available before making a decision. The horizontal axisindicates performance capability and features while the vertical axisaddresses price level.Need to measureviscosity in-line?Brookfield also offers acomplete line of processviscometers. (p59)• TorqueDialReadingDV-E• Calculates Viscosity• TorqueDV-IPrimeCone /Plate• Small Sample Size• Defined Shear RateDV-IPrime• Optional Temp Probe• Calculates Viscosity• TorqueDV-II+ProCone/Plate• Small Sample Size• Defined Shear RateDV-II+Pro• Temp Probe• RS232 (PC control)• Calculates Viscosity• TorqueDV-IIIUltraCone/Plate• Small Sample Size• Defined Shear RateDV-IIIUltra• Stand AloneProgrammable• Temp Probe• RS232 (PC control)• Data Analysis• Calculates Viscosity• Torque• Yield StressCAP2000+Cone/Plate• Broad ShearRate Range• Peltier PlateTemp Control• RS 232 (PC control)• Peltier PlateR/SCone/PlateR/SCoaxialCylinder• Controlled Stress& Rate• Yield Stress• Stand AloneProgrammable• Temp Probe• RS232 (PC control)• Calculates Viscosity• TorquePerformancePVSRheometer• Pressurized SampleChamber• Controlled Rate• Temp Probe• RS232 (PC control)• Calculates Viscosity• TorqueSpecialPurposeInstrumentsYR-IYieldTestRheometer• Yield StressKU-2KREBS• KREBSViscosity• Required forPaint andCoatingsCAPI000+Cone/Plate• SingleShear Rate• Required forPaint andCoatingsR/SSoftSolidsTester• Yield Stress• Creep• RecoveryBrookfield also offers several special purpose instruments which are used to perform a specific type of test or are used to evaluate certain types of materials.BROOKFIELD VISCOMETERS & RHEOMETERST: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Questions to Consider1. What is the viscosity range of your material: Low, medium, high?2. What rotational speeds or shear rates are important?3. How much sample is available for testing?4. Is temperature measurement/control necessary?5. Do you need to record the viscosity data?The Selection MethodThe Model Selection Table (shown at right) shows detailed information onstandard Brookfield Viscometers/Rheometers, including the Dial Reading,DV-E, DV-I Prime, DV-II+Pro, and DV-III Ultra. The Applications Table (shownat lower right) shows information on typical applications of the standardBrookfield viscosity ranges. There may be industry or supplier/vendorspecifications that you need to duplicate. Before making a final selection,we suggest that you confer with people in your industry to find out whichBrookfield Viscometer they are using so that your data can be correlated.More application details may be found throughout this catalog for otherBrookfield instruments on the following pages:CAP1000+/2000+ Viscometers (p14-15) YR-1 Rheometer (p24-25)PVS Rheometer (p18-19)KU-2 Viscometer (p26)R/S Plus series Rheometers (p20-23) Texture Analyzer (p50-51)In addition, you may wish to call us and discuss your application or refer toour extensive library of technical papers which covers a complete spectrumof applications. We can also test your materials at Brookfield to recommendthe instrument most suitable for your application.SpindlesStandard Brookfield Viscometers/Rheometers are supplied with a standardspindle set constructed of stainless steel (#302). Additional spindle optionsare available in #316 stainless steel or with Teflon coating for increasedcorrosion resistance. Other spindles and accessories are also available. (p39-43)Cylindrical SpindlesCylindrical spindles are particularly valuable when measuringnon-Newtonian fluids and are applicable to any Brookfield Viscometermodel with the use of appropriate range tables. Cylindrical spindles may besubstituted for standard spindles upon request.LV Spindle SetRV/HA/HB Spindle SetOptionalCylindrical Spindle SetNeed additional assistance? Our website, www.brookfieldengineering.com, contains additionalinformation on the measurement selection process as well as detailed application notes.Model Selection TableBrookfield StandardViscometers/Rheometers**MODELLVT 1*LVDV-E 1*LVDV-IP 1*LVDV-II+P 1*LVDV-IIIU 1*RVT 100RVDV-E 100RVDV-IP 100RVDV-II+P 100RVDV-IIIU 100HAT 200HADV-E 200HADV-IP 200HADV-II+P 200HADV-IIIU 200HBT 800HBDV-E 800HBDV-IP 800HBDV-II+P 800HBDV-IIIU 800High Viscosity Medium Viscosity Low ViscosityMin. VISCOSITY RANGEMax. 2 M2 M2 M6 M6 M8 M13 M13 M40 M40 M16 M26 M26 M80 M80 M64 M104 M104 M320 M320 MVISCOSITY RANGESPEEDS8181854 selectable0.01 to 25010181854 selectable0.01 to 25010181854 selectable0.01 to 25010181854 selectable0.01 to 250** Standard torque range values * Minimum ranges can be extended to as lowas 1 cP with the use of Brookfield Accessories44444666666666666666# of SpindlesSuppliedM = 1 millionApplications TableConsider application and viscosity range whenselecting model (LV, RV, HA, HB)LV SERIES – LOW VISCOSITYAdhesives (solvent base) Inks Photo ResistBiological Fluids Juices Polymer SolutionsChemicals Latex Rubber SolutionsCosmetics Oils SolventsDairy Products Paints and CoatingsHot WaxesPharmaceuticalsRV SERIES – MEDIUM VISCOSITYAdhesives (hot melt) Gums PlastisolsAsphalt (SHRP) Inks (screen printing) StarchesCeramic Slurries Organisols Surface CoatingsCreams Paints ToothpasteDairy Products Paper Coatings VarnishFood Products Paper PulpHA/HB SERIES – HIGH VISCOSITYAsphaltPastesCaulking Compounds Peanut ButterChocolatePuttyEpoxiesRoofing CompoundsGelsSealantsInks (ballpoint, offset, lithographic) Sheet Molding CompoundMolassesTars

NEW DV-II+Pro Viscometerour most versatile continuous sensing viscometerDisplayed Info:–Viscosity (cP or mPa•s)–Temperature (°C or °F)–Shear Rate/Stress–% Torque–Speed/SpindleBi-directional RS-232 PC interfaceprovides optional computer control andautomatic data gathering capabilityComplete computer controlwith optional Rheocalc softwareCustomizable OptionsDownload custom test programswith DV Loader software(included with instrument)Scroll Keysfor Simple Selectionof Speed & Spindle54 selectable speedsprovide superior range ofviscosity/shear rate measurementsAuto Range Showing–Full Scale Range (FSR) at 100%–Maximum viscosity measuredwith Spindle/Speed combinationBuilt-in RTD Temperature ProbeAccuracy: ±1.0% of rangeRepeatability: ±0.2%MODELLVDV-II+PRVDV-II+PHADV-II+PHBDV-II+PVISCOSITYRANGEMin.1†100††200††800††Max.6M40M80M320MRPM.01-200.01-200.01-200.01-200SPEEDSNumber ofIncrements54545454† 1 cP achieved with UL Adapter accessory. 15 cP on LV with standard spindles.†† Minimum viscosity is achieved with optional RV/HA/HB-1 spindle.BROOKFIELD VISCOMETERST: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

What’s Included?Instrument6 spindles (RV/HA/HB) (p39)or 4 spindles (LV) (p39)DV Loader software ERTD Temperature ProbeSpindle Guard Leg*Lab Stand (Model S) (p44)Carrying Case*Not applicable to HA or HB versionsDV Loader Software IncludedCreate custom tests using your PCDV Loader allows users to create repeatable custom tests with choices ofparameters for speed, test duration, etc. to be downloaded from a PC toa DV-II+ Pro Viscometer. Disconnect the DV-II+Pro from the PC for secure,user-defined test methods.Connect DV-II+Pro to a PC tocreate a custom test program onyour PC and then download testparameters to your viscometerOptional AccessoriesRheocalc32 Software EWingather Software EBall Bearing Suspension (RV/HA/HB) (p44)Viscosity Standards (p46)RV/HA/HB-1 Spindle (p39)EZ-Lock Spindle Coupling System (p44)Quick Action Lab Stand (p44)Temperature Bath (p27)Small Sample Adapter (p32)UL Adapter (p34)Thermosel (p30)Rheocalc32 Software OptionalGet total control of your instrument and test parametersAutomatically control and collect data with Rheocalc32 and a dedicatedcomputer. Rheocalc32 can analyze data, generate multiple plot overlays,print tabular data, run math models and perform other time-savingroutines. Data can be saved in the program or exported to Excel.–Controls test parameters with powerful scripting capabilities–NEW wizard for self-guiding creation of test programs–Looping functions for repetitive tasks–Automates data collection to save time–Math modeling for yield stress calculations, plastic index–Plot up to five data sets for comparisonsHelipath Stand with T-bar Spindles (p36)Spiral Adapter (p38)DIN Adapter (p38)Quick Connect/Extension Links (p43)Vane Spindles (p37 & 42)Protective Keypad Covers (p44)Wingather Software OptionalData collection software to collect, analyze and record test dataWingather software provides an easy way to gather data and plot graphswhile creating permanent test records. Data can be saved in the program orexported to Excel.–Automates data collection to save time–Reduces operator error–Math modeling for yield stress calculations, plastic index–Plot up to five data sets for comparisonsDV-II+Pro CPThe DV-II+Pro is available in aWells/Brookfield Cone & Plate Version (p12)Must be ordered when instrument is first purchased.

DV-I Prime ViscometerThe only viscometer in its class to offer continuoussensing and data display!New Sleek lookwith simple-to-usekeypadNew Output connection to printerDisplayed info:–Viscosity (cP or mPa•s)–% Torque–Speed/Spindle–Temperature (°C or °F)if optional RTD TemperatureProbe is installedNew RS-232 PC interfacefor use with optionalWingather SoftwareAnalog outputsfor recording torqueand temperature(optional)Displays under/over range conditionsAuto Range Showing–Full Scale Range (FSR) at 100%–Maximum viscosity measuredwith Spindle/Speed combinationScroll Keysfor Simple Selectionof Speed & SpindleOptional RTD Temperature Probe DVP-94YMust be ordered when instrument is first purchased.18 speedsprovide greatrange capabilityNew Direct accessto time measurement function(time to torque, time to stop)New Temperature off-setcapability to ±1°CAccuracy: ±1.0% of rangeRepeatability: ±0.2%BROOKFIELD VISCOMETERSMODEL**LVDV-IPRVDV-IPHADV-IPHBDV-IPVISCOSITYRANGEMin.1*100200800Max.2M13M26M104MRPM.3-100.3-100.3-100.3-100* Minimum ranges can be extended to as low as 1 cPwith the use of Brookfield Accessories** Standard torque range valuesSPEEDSNumber ofIncrements18181818T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

What’s Included?Instrument6 spindles (RV/HA/HB) (p39)or 4 spindles (LV) (p39)Spindle Guard Leg*Lab Stand (Model S) (p44)Carrying Case*Not applicable to HA or HB versionsWingather Software OptionalData collection software to collect, analyze and record test dataWingather software provides an easy way to gather data and plot graphswhile creating permanent test records. Data can be saved in the program orexported to Excel.–Automates data collection to save time–Reduces operator error–Math modeling for yield stress calculations, plastic index–Plot up to five data sets for comparisonsOptional AccessoriesRTD Temperature ProbeBall Bearing Suspension (RV/HA/HB) (p44)Viscosity Standards (p46)RV/HA/HB-1 Spindle (p39)Quick Action Lab Stand (p3)EZ-Lock Spindle Coupling System (p44)Temperature Bath (p27)Small Sample Adapter (p32)UL Adapter (p34)Thermosel (p30)Helipath Stand with T-bar Spindles (p36)Spiral Adapter (p38)DIN Adapter (p38)Quick Connect/Extension Links (p43)Vane Spindles (p37 & 42)Protective Keypad Covers (p45)DV-I Prime CPThe DV-I Prime is available in aWells/Brookfield Cone & Plate Version (p12)Must be ordered when instrument is first purchased.

DV-E Viscometerour lowest cost digital viscometerNo calculationsrequired–Direct readingof viscosity in cPor mPa•sDisplayed info:–Viscosity(cP or mPa•s)–% Torque–Speed/SpindleEasy-to-Use:–Flip a switch–Turn a knobSpindle/SpeedSelectionFlip to “Speed”–Turn the knob–Choose RPMFlip to “Spindle”–Turn the knob–Choose spindleAuto Rangepush fordeterminingfull scalerange (FSR)viscosity18 Speedsfor completerange capabilityWhat’s Included?Instrument6 spindles (RV/HA/HB) (p39)or 4 spindles (LV) (p39)Spindle Guard Leg*Lab Stand (Model A) (p44)Carrying Case*Not applicable to HA or HB versionsOptional AccessoriesViscosity Standards (p46)RV/HA/HB-1 Spindle (p39)Quick Action Lab Stand (p44)Temperature Bath (p27)Small Sample Adapter (p32)UL Adapter (p34)Thermosel (p30)Helipath Stand with T-bar Spindles (p36)Spiral Adapter (p38)DIN Adapter (p38)Quick Connect/Extension Links (p44)Vane Spindles (p37 & 42)Accuracy: ±1.0% of rangeRepeatability: ±0.2%MODELLVDV-ERVDV-EHADV-EHBDV-EVISCOSITYRANGESPEEDSMin. Max. RPM1 †2M .3-100 18800 †† 104M .3-100 18100 ††13M .3-100 18200 ††26M .3-100 18Number ofIncrements† 1 cP achieved with UL Adapter accessory. 15 cP on LV with standard spindles.†† Minimum viscosity is achieved with optional RV/HA/HB-1 spindle.BROOKFIELD VISCOMETERS10 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Dial Reading Viscometerour original…now celebrating 75 years!The WorldwideStandard ViscometerElectronic Drivemeans quiet,reliable operation2–Year LimitedWarrantyAvailable in explosion proofU.L. Class 1, Group D locations(w/o Electronic Drive)Accuracy: ±1.0% of rangeRepeatability: ±0.2%Easy–to–SelectSpeedsAnalog display–Shows % Torque–Use Factor Finderto convert readingto centipoiseSimple-to-use,easy setupWhat’s Included?Instrument6 spindles (RV/HA/HB) (p39)or 4 spindles (LV) (p39)Spindle Guard Leg*Lab Stand (Model A) (p44)Carrying Case*Not applicable to HA or HB versionsOptional AccessoriesViscosity Standards (p46)RV/HA/HB-1 Spindle (p39)Quick Action Lab Stand (p44)Temperature Bath (p27)Small Sample Adapter (p32)UL Adapter (p34)Thermosel (p30)Helipath Stand with T-bar Spindles (p36)Spiral Adapter (p38)DIN Adapter (p38)Quick Connect/Extension Links (p43)Vane Spindles (p37 & 42)MODELLVTRVTHATHBTVISCOSITYRANGESPEEDSMin. Max. RPM1 †2M .3-60 8800 †† 64M .5-100 10100 ††8M .5-100 10200 ††16M .5-100 10Number ofIncrements† 1 cP achieved with UL Adapter accessory. 15 cP on LV with standard spindles.†† Minimum viscosity is achieved with optional RV/HA/HB-1 spindle.Easy SpeedAdjustmentand On/OffControl11

Wells/Brookfield Cone & Platefor small samplesDetermine absolute viscosityof small samples (0.5 – 2.0 mL)Available in these models–DV-III Ultra Rheometer–DV-II+Pro Viscometer–DV-I Prime ViscometerRTD Temperature Sensorin Sample Cup (Optional)provides direct measurementof sample temperaturePrecise shear ratesfor determining a material’sflow curve behaviorElectronic Gap Adjustment–simplified setup–accurate–easy-to-useControl Sample Temperatureusing a Brookfield circulatingwater bath (p27)Rapid temperature controldue to small sample sizeAccuracy: ±1.0% of rangeRepeatability: ±0.2%MODELLVDV-IIIUCPLVDV-II+PCPLVDV-IPCPRVDV-IIIUCPRVDV-II+PCPRVDV-IPCPHADV-IIIUCPHADV-II+PCPHADV-IPCPHBDV-IIIUCPHBDV-II+PCPHBDV-IPCPCone Spindle CPE-40.1 - 3K.2 - 3K.3 - 1K1 - 32K1.6 - 32K3 - 10K2.6 - 65K3 - 65K6.6 - 21K10.5 - 261K13 - 261K26 - 87KSample Volume .5mLShear Rate (sec -1 7.5NCone Spindle CPE-41.5 - 11K.6 - 11K1 - 3K5 - 122K6 - 122K12 - 41K10 - 245K12 - 245K24 - 81K39 - 982K49 - 982K98 - 327KSample Volume 2.0mLShear Rate (sec -1 2.0NCone Spindle CPE-42.2 - 6K.3 - 6K.6 - 2K2 - 64K3 - 64K6 - 21K5 - 128K6 - 128K12 - 42K20 - 512K25.6 - 512K51 - 170KSample Volume 1.0mLShear Rate (sec -1 3.84NCone Spindle CPE-512 - 48K2 - 48K5 - 16K20 - 512K25 - 512K51 - 170K41 - 1M51 - 1M102 - 341K163 - 4M204 - 4M409 - 1MSample Volume .5mLShear Rate (sec -1 3.84NCone Spindle CPE-523 - 92K4 - 92K9 - 30K39 - 983K49 - 983K98 - 327K78 - 2M98 - 2M196 - 655K314 - 7.8M393 - 7.8M786 - 2.6M N = RPM e.g. Spindle CPE-40 7.50 x 10 (rpm) = 75.0 sec-1* Dependant upon cone selected.Sample Volume .5mLShear Rate (sec -1 2.0NRPM.01 - 250.01 - 2000.3 - 100.01 - 250.01 - 2000.3 - 100.01 - 250.01 - 2000.3 - 100.01 - 250.01 - 2000.3 - 100SPEEDSNumber ofIncrements2.6K54182.6K54182.6K54182.6K5418BROOKFIELD VISCOMETERS12 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

What’s Included?InstrumentLab Stand (p44)Choice of one Cone Spindle (p40)Sample Cup (p40)Optional AccessoriesEmbedded Temperature Probein Sample Cup (p40)Luer and Purge fittingsRheocalc32 Software OptionalGet total control of your instrument and test parametersAutomatically control and collect data with Rheocalc32 and a dedicatedcomputer. Rheocalc32 can analyze data, generate multiple plot overlays,print tabular data, run math models and perform other time-savingroutines. Data can be saved in the program or exported to Excel.–Controls test parameters with powerful scripting capabilities–NEW wizard for self-guiding creation of test programs–Looping functions for repetitive tasks–Automates data collection to save time–Math modeling for yield stress calculations, plastic index–Plot up to five data sets for comparisonsBall Bearing Suspension (p44)Additional Cone Spindles (p40)Viscosity Standards (p46)Circulating Temperature Bath (p27)Rheocalc32 Software E(DV-III+ Ultra & DV-II+Pro only)Wingather Software E(DV-II+Pro only)Protective Keypad Covers (p45)ElectronicGap LED’sVernierAdjustmentRingConeSpindleWingather Software OptionalData collection software to collect, analyze and record test dataWingather software provides an easy way to gather data and plot graphswhile creating permanent test records. Data can be saved in the program orexported to Excel.–Automates data collection to save time–Reduces operator error–Math modeling for yield stress calculations, plastic index–Plot up to five data sets for comparisonsCupOptional EmbeddedTemperature Probe(not shown) fordirect temperaturemeasurement ofsampleOptional Sample CupPurge Fittingschoice of 2, 3, or 4Luer Fittingfor sample inletwith luer and purge fittings for introducingand removing test sample while cup remainsattached to instrument13

CAP 1000+ & CAP 2000+Cone & Plate ViscometersEasy–to–Use Control Handlefor accurate, automatic cone positioningDesigned to handle repetitive testingin production environmentswith easy setup and cleaning4–Line Displayallows simultaneous viewingof all test parametersKeypadfor directinput of testparametersChoice of instruments:CAP1000+ (single speed)CAP2000+ (variable speed)Small sample size(less than 1 mL)Cone Spindleis easily removedfor cleaningAutomatic cone/gap positioningBuilt-in Peltier Platefor temperaturecontrol of sample:L Series: 5°C — 75°CH Series: 50°C — 235°CMODELCAP 1000+CAP 2000+VISCOSITYRANGE*Min.Max.see chart on(p15)SPEEDSRPM900/7505-1KNumber ofIncrements2995* Dependant on cone selected.BROOKFIELD VISCOMETERS14 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

What’s Included?InstrumentChoice of Torque Range:High Torque (ICI Specification): 181,000 dyne • cmLow Torque: 7,970 dyne • cmChoice of One Cone Spindle (p40)Choice of Temperature Control: L or HOptional AccessoriesCAP Viscosity Standards (p47)Additional Cone Spindle (p40)Capcalc32 Software EProtective Keypad Covers (p45)Capcalc32 Software OptionalTurn your CAP2000+ Viscometer into a more powerful rheometerCapcalc32 allows control of the CAP2000+ Viscometer while providingautomatic data capture and graphical display. Automate your CAP 2000+Viscometer and generate flow curves quickly and easily.–Controls test parameters with powerful scripting capabilities–Looping functions for repetitive tasks–Automates data collection to save time–Reduces operator error–Math modeling for yield stress calculations, plastic index–Plot up to five data sets for comparisonsCAP1000+: Single speed 750 or 900 rpminstrument, ideal for QC. Optional choice ofalternative speed is available upon request.See examples below at 400 rpm and 100 rpm.CAP2000+: Variable speed 5-1000 rpminstrument ideal for R&D as well as moredetailed QC testing. Automated PC control(using optional Capcalc32 software).ApplicationsMEDIUM VISCOSITYAdhesives (hot melt) Coatings ResinsArchitectural Coatings Industrial Coatings StarchesAutocoats (Hi-performance) Inks (screen printing) SurfaceCreams Organisols UV CoatingsFood Products Paints VarnishGelsPaper CoatingsGumsPlastisolsHIGH VISCOSITYAdhesives Gels SealantsAsphalt Inks (ballpoint, offset, lithographic) Sheet Molding CompoundChocolate Molasses TarsComposite Polymers Pastes Vinyl EstersEpoxiesRoofing CompoundsPerfect forPaints & CoatingsMeets Industry Standards:ASTM D4287, ISO 2884, BS 3900High Shear Rate Cone & Plate(10,000 sec -1 )15

DV-III Ultra Rheometerfor measuring viscosity and yield stressThe “all-in-one” toolto easily predict amaterial’s completeflow behaviorDisplayed info:–Viscosity (cP or mPa•s)–Temperature (°C or °F)–Shear Rate/Stress–% Torque–Speed/Spindle–Step Program Status–Math Model Calculations2600 Speedsto characterizea wide range offlow behaviorAnalyze characteristicssuch as yield stress, flow curves,(mixing, pumping, spraying),leveling and recoveryBi-directional RS-232 PC interfaceprovides optional computer control andautomatic data gathering capabilityComplete computer controlusing optional Rheocalc32 software letsyou control all aspects of rheologicaltesting directly from the computerDownload custom test programswith RheoLoader software(included with instrument)Built-in math modelsfor data analysis instand-alone mode.E.g. Casson, Bingham,Power LawStand-alone programming:Enter test method steps, temperaturerequirements, start program, seeresults on built-in displayAccuracy: ±1.0% of rangeRepeatability: ±0.2%Built-in RTD Temperature ProbeMODELLVDV-IIIURVDV-IIIUHADV-IIIUHBDV-IIIUVISCOSITYRANGESPEEDSMin. Max.RPM1 †6M .01-250 2.6K800 †† 320M .01-250 2.6K100 ††40M .01-250 2.6K200 ††80M .01-250 2.6KNumber ofIncrements† 1 cP achieved with UL Adapter accessory. 15 cP on LV with standard spindles.†† Minimum viscosity is achieved with optional RV/HA/HB-1 spindle.BROOKFIELD RHEOMETERS16 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

What’s Included?Instrument6 spindles (RV/HA/HB) (p39)or 4 spindles (LV) (p39)RheoLoader software EEZ-Yield Software ERTD Temperature ProbeSpindle Guard Leg*Lab Stand BaseCarrying Case*Not applicable to HA or HB versionsRheoLoader Software IncludedCustomize your test criteria for routine product QCThis exclusive Brookfield software allows you to create customizedprograms for your instrument, each with as many as 50 commands. Oncea program is downloaded from a host computer, comprehensive viscositytests can be run automatically in stand-alone mode.Optional AccessoriesRheocalc32 Software EBall Bearing Suspension (p44)Viscosity Standards (p46)RV/HA/HB-1 Spindle (p39)EZ-Lock Spindle Coupling System (p44)Temperature Bath (p27)Small Sample Adapter (p32)UL Adapter (p34)Thermosel (p30)Helipath Stand with T-bar Spindles (p36)Spiral Adapter (p38)DIN Adapter (p38)Quick Connect/Extension Links (p43)Vane Spindles (p37 & 42)Protective Keypad Covers (p45)EZ-Yield Software IncludedYield tests can be performed with EZ-Yield software and vane spindles.EZ-Yield Test Plots forMultiple SamplesTORQUERANGELVRVHAHB5xHBSHEAR STRESSRANGEPa dyne/cm 2.5-1001-2004-80020-4KContact Brookfield5-1K10-2K40-8K200-40KRheocalc32 Software OptionalGet total control of your instrument and test parametersAutomatically control and collect data with Rheocalc32 and a dedicatedcomputer. Rheocalc32 can analyze data, generate multiple plot overlays,print tabular data, run math models and perform other time-savingroutines. Data can be saved in the program or exported to Excel.–Controls test parameters with powerful scripting capabilities–NEW wizard for self-guiding creation of test programs–Looping functions for repetitive tasks–Automates data collection to save time–Math modeling for yield stress calculations, plastic index–Plot up to five data sets for comparisonsDV-III Ultra CPThe DV-III Ultra is available in aWells/Brookfield Cone & Plate Version (p12)Must be ordered when instrument is first purchased.17

PVS Rheometer1’ x 1’ x 2’ instrument for portable site-to-site mobilityRobust Motorcapable of speedsup to 1000 rpmVacuum to high pressuremeasurements up to 1,000 psiQuick and easy setupin minutesHastelloy C cup and bobsfor operation in severe field environmentsSafety Relief Valve1000psi(high pressure)Low Shear Rate Viscosity (LSRV)measurement to .02 sec -1Temperature conditions:from -40°C to +200°CAvoids sample boil-offCouette Geometry -Outside Cylinder Rotates,“Bob” inside remainsstationary, generating shearrates up to 1700 sec -1RTD on the inner cylinderinsures accurate sampletemperature measurementTest to industry standardsPVS Rheometer RangesBOB/STATORSAMPLECUPPVS-B1-D-HCPVS-B2-D-HCPVS-B5-D-HCPVS-TA5B5-D-HCHC = Hastelloy CVISCOSITYRANGEcP (mPa•s)1-3M20-36M5-9M.5-1MSHEARRATE(sec -1 )1.7N0.38N0.85N0.85NSAMPLEVOLUME(mL)235340150VAPORVOLUME(mL)90909090M = 1 million N = RPM mL = MilliliterMODELPVSVISCOSITYRANGE*SPEEDSMin. Max. RPM.5 36M .05-1K 10KNumber ofIncrements* Ranges depend on “Bob” spindle selected.BROOKFIELD RHEOMETERS18 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

What’s Included?InstrumentChoice of spindle (bob) (p41)Sample Cup (p41)RheoVision software ECarrying Case (shown below)Optional AccessoriesViscosity Standards (p46)Additional spindle (bobs) (p41)ComputerTemperature Control BathRheoVision Software IncludedFor automation and control of all test parametersSpecifically designed for sophisticated rheological analysis, RheoVisionmakes viscosity measurement under pressurized and temperature controlledconditions an easy task. Powerful scripting language provides simple tocomplex data collection programs including automatic calculation of yieldstress using Bingham, Herschel-Bulkley, Power Law equations.–Enhanced graphing capabilities–Instantaneous flow curves–Built in math modeling–User-friendly ramp wizard for quick API testing–Seal history tracking featureThermo Bath (shown below)Available with triple annulus geometry for increasedsensitivity when measuring low viscosity fluidsApplicationsFracturing FluidsDrilling MudsVolatile ChemicalsPetroleum ProductsBlack LiquorThermo Bath optionfor sample heating with small spacerequirement. Call for details.Carrying Casefor portability in the field19

R/S Plus Rheometersfor Controlled Rate/Stress MeasurementMODELR/S-CPS Cone/PlateR/S-SST Soft Solids TesterR/S CPS ModelsR/S-CPS Cone/PlateR/S-CPS Plate/PlateR/S Coaxial CylinderR/S-SSTVISCOSITYRANGE*Min.20201ApplicationsCoatingsCosmeticsCreamsGelsApplicationsAdhesivesCosmeticsFoodsGelsMax.3.2M9.9M30Msee page 23 for rangesInksPaintsPastesPuttiesRPM0.1-10000.1-10000.1-10000.1-1000* Using spindles provided. Ranges can be expanded or reduced using accessories.SPEEDSNumber ofIncrements>10K>10K>10K>10KApplicationsChemicalsDairy ProductsInksJuicesOilsPaints/CoatingsPolymer SolutionsSlurriesR/S-CC Coaxial CylinderPastesSealantsViscous PolymersR/S represents the best that Brookfield hasto offer — an instrument that operates bothin controlled Rate (rpm) and controlledshear Stress (torque) modes. The BrookfieldR/S Plus Rheometers out perform and offergreater flexibility than other rheometers intheir class.The R/S Plus series of rheometers is nowavailable with enhanced encoder forincreased measuring and control capabilitieswhile maintaining sophisticated rheologicalanalysis — all at an affordable price.The R/S Plus is available in threeconfigurations: Model R/S-CC (coaxialcylinder), Model R/S-CPS (cone and plate)and Model R/S-SST (soft solids tester withvane spindles) for a variety of samples.All R/S Plus Rheometers have a ruggeddesign for many years of trouble-freeoperation. Rapid spindle attachment andeasy to clean surfaces ensure its use will saveyou time and money.R/S Plus Rheometers include such uniquefeatures as:E Wide torque range: 0.05 to 50 mNmE Variable speed from 0.01 to 1000 rpmE Stand-alone operation for quick singlepoint evaluation or programmed testsusing keypadE PC interface for powerful capability of flowcurve analysis, determination of yieldstress and thixotropy when runningRheo3000 softwareE Measurement of yield stress and strain,modulus and creepE Test method sequencing capability toassess complete flow behavior of sampleincluding rebuild/recovery evaluationafter shearingE Quality controlmode enablestolerance bandsto be placedaround measurementdata forimmediate visualpass/fail determinationBROOKFIELD RHEOMETERS20 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

R/S-CPS RheometerCone/Plate & Plate/Plate Systems for small samplesChoice of several cone spindlesto accommodate all sample andmeasurement requirements (p41)Plate/Plate measurementcapability for highly filled sampleUser-friendly keypadand display forstand-aloneoperationControlled shear stress/shear rateoperation makes it easy to studymaterial behavior from initial yieldto flow curve response (p41)Quick and easyCone/Plateor Plate/PlateGap SettingWhat’s Included?InstrumentBaseOptional AccessoriesChoice of Spindle geometries (p41)Rheo3000 Software HViscosity Standards (p47)Additional Spindles (p41)Water Baths (p27)Solvent TrapThermal Barrier**two part chamber provides thermal isolation of themeasurement zoneVery small sample sizepermits rapid test setup and clean up (p41)Precision HeightGauge ShowsActual GapSettingQuick ConnectSpindle CouplingRheo3000 Software OptionalFor programmed controland data analysis with a computerProgram shear stress or shear rate,temperature and test time requirements, andlet your PC do the data collection and analysiswork for you! Mathematical data analysismodels included: Newton, Bingham, Casson,Herschel-Bulkley, Ostwald, Steiger-OryCone/Plate Temperature Control OptionsTemperature Controlvia Brookfield Bath,Peltier Device orElectrical HeatingRapid temperature controlof plate with Peltier option provides quickprofiling of viscosity vs. temperatureMODELR/S-CPSR/S-CPS-P1R/S-CPS-P2R/S-CPS-E1DescriptionBathPeltier P1Peltier P2ElectronicSee page 41 for spindle ranges and sample volumes.Temperature-15° to 250°C0° to 135°C20° to 180°C60° to 250°C21

R/S-CC Coaxial Cylinder Rheometerfor accurate shear rate control and absolute viscosity measurementStand-alone operationpermits use onproduction floorUser-friendly keypadand displaySmall sample sizefacilitates rapidtemperaturecontrol duringtestingControlled shear stress/shear rateoperation makes it easy to studymaterial behavior from initial yieldto flow curve response (p41)Quick ConnectCouplingCoaxial sensing geometryfor single point QC or fullrheological profilingWhat’s Included?InstrumentBaseOptional AccessoriesChoice of Spindle Geometries (p41)Rheo3000 Software HViscosity Standards (p47)Additional Spindles/Chambers (p41)Disposable ChambersQuick Connect Bayonet ChambersFTK Water Jacket for Temperature ControlPT-E Immersion Temperature Sensor PT100KE Cooling Device**required for temperatures over 90°CRheo3000 Software OptionalFor programmed controland data analysis with a computerProgram shear stress or shear rate,temperature and test time requirements,and let your PC do the data collection andanalysis work for you! Mathematical dataprocessing models included: Newton,Bingham, Casson, Herschel-Bulkley, Ostwald,Steiger-Ory. For integrated temperaturecontrol, contact Brookfield for details.ChambersWater JacketCoaxial Cylinder SpindlesSample Chamber OptionsChambersImmersion ChambersFTK Water Jacket ChambersDisposable ChambersSee page 41 for spindle ranges and sample volumes.Temperature-20°C to 180°C-20°C to 180°C-20°C to 180°CBROOKFIELD SPECIALTY INSTRUMENTS22 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

R/S-SST Soft Solids Testerfor pastes, slurries and materials with particulatesProvides Viscoelastic Data– Yield Stress– Shear Modulus– Recovery– CreepQuantifies meaningful propertieslike wobbliness, sloppiness,consistency and textureWhat’s Included?Instrument with adjustable heightAdjustable Sample Container Clamp on Lab StandOptional AccessoriesChoice of Vane Spindle (p41)Rheo3000 Software with Soft Solids Analysis HViscosity Standards (p47)Additional Vane Spindles (p41)Coaxial Cylinder Spindles (p41)Smooth Height Adjustmentfor easy insertion of spindleinto sample without disruptingstructure of sampleCoaxial Cylinderscan also be used for completeflow curve analysisRheo3000 Software Optionalwith Soft Solids AnalysisSoftwareprovides visualinformationand test dataon viscoelasticbehavior suchas viscous creepand recoveryVane Spindle Geometry– Quick-Connect coupling– Easy-to-test method– Allows spindle insertionwithout compromisingsample structureRugged basewith adjustable samplecontainer clamp for precisepositioning of sampleR/S-SST Spindle RangesSpindleV3-80-40V3-60-30V3-40-20V3-30-15V3-20-10V3-10-5Quality Control Mode enablestolerance bands to be placed aroundmeasurement data for immediatevisual pass/fail determinationCustom vane spindles available. Call for details.Shear Stress Range (Pa)6-20015-50551-1700120-4000408-136003276-10920023

YR-1 Yield Stress Rheometera low-cost QC tool to enhance material characterizationDisplayed Information:– Yield Stress Value (Pascal)– % TorqueIdeal for QCEZ-Yield Software includedfor use with a PCUser-friendly Keypadand display forstand-aloneoperationTemperature Probe included(not shown)Vane Spindle Geometryworks with thin tohighly viscous materials(Does not disturb sampleduring spindle insertion)Simple to useExcellent repeatabilityAffordableChoice of Spindle Sizesto fit any samplecontainerBROOKFIELD SPECIALTY INSTRUMENTS24 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

What’s Included?InstrumentV-72 & V-73 Vane Spindles (p37 & 42) HEZ-Yield Software ERTD Temperature ProbeLab Stand (Model S) (p44)Carrying CaseOptional AccessoriesV-71, V-74 & V-75 Vane Spindles (p37 & 42)Viscosity Standards (p46)Temperature Bath (p27)Protective Keypad Covers (p45)Quick Action Lab Stand (p44)Applications1/4 RV SERIES — VERY LOW YIELDJuicesBeveragesRV SERIES — LOW YIELDFood Products ShampooGelsYogurtHair GelsHB SERIES — MEDIUM YIELDChocolateLotionsFood Products KetchupHand Cream Personal Care ProductsJellyToothpaste5xHB SERIES — HIGH YIELDAdhesive Caulk PastesCheese Spread Peanut ButterFruit Preserves ShorteningYR-1 Vane SpindlesV-72 and V-73 vane spindles with caseare supplied with YR-1.V-71 (large), V-74 (small) and V-75 (small)vane spindles are optional.EZ-Yield Software IncludedEasily program and capture dataEZ-Yield software is included with all YR-1 Yield Stress Rheometers andallows for simple data collection on a PC. Collecting data affords you arecord of all your valuable testing results.EZ-Yield Data CollectionEZ-Yield software features a simple parameter menu for set up of 10 differenttest programs. Test parameters include: test number and name, spindle #,immersion mark, pre-shear (rpm), wait time before test startup, run speed(rpm), and low & high yield control limits (Pa) for QC use.Streaming data can be viewed and test data — torque vs. time, stress vs. strain— is displayed in both tabular and graphical formats on a PC when using EZ-Yield software.Vane Spindle RangesSPINDLEV-71V-72V-73V-74V-75V-71V-72V-73V-74V-75V-71V-72V-73V-74V-75V-71V-72V-73V-74V-75TORQUERANGE1/4RV1/4RV1/4RV1/4RV1/4RVRVRVRVRVRVHAHAHAHAHAHBHBHBHBHBSHEAR STRESSRANGE (Pa).125-1.25.5-52.5-2525-25010-100.5-52-2010-100100-1K40-4001-104-4020-200200-2K80-8004-4016-16080-800800-8K320-3.2KNote:1. 1 Pa = 10 dyne/cm22. Viscosity Range is given at rotational speed of 10 RPM3. 5xHB is the highest torque range available4. Not for use with DV-E ViscometersM = 1 million K = 1 thousand Pa = PascalEZ-Yield Test Plotsfor Multiple Samples25

KU-2 Viscometerfor Paints, Coatings, and InksASTM D562 Compatible(industry specification)Easy to useno weights,simplifies anestablished testprocedureLED Display Info:–Krebs Units–Gram Units(Weight)–Centipoise*Select Krebs orGrams or CentipoiseLock-In Test Resultswith Hold SwitchAccuracy: ±1.0% of rangeRepeatability: ±0.5%What’s Included?InstrumentKrebs-type Spindle (p42)Communications Port for PrinterAdapter for Quart, Pint and Half-Pint Cans †Optional AccessoriesAir PurgePaste Spindle (p42)ApplicationsPaints Coatings AdhesivesInksPastes*Centipoise values based on the conversion from KrebsUnits as defined in the ASTM D562.†Adapters which accommodate metric size cans areavailable for an additional fee — contact Brookfield todiscuss your requirementsStandard Krebs SpindleMeasurement range:40 to 141 KU, 32 to 1099 gm,and 27 to 5274 cP*Printer Connectionfor automatic testdocumentationAdapter providedfor 1/2 Pint, Pint, &Quart ContainersBROOKFIELD SPECIALTY INSTRUMENTS26 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Temperature ControlYou need to control sample temperatureduring viscosity measurementsTemperature control during viscositymeasurement helps insure accuratetest results. The addition of a Brookfieldcirculating water bath is a smart investment.The Brookfield TC Series Circulating WaterBaths are uniquely configured for use withyour Brookfield Viscometer or Rheometer.Full Graphic DisplayProgrammableController shownProgrammable Controllersoffer the highest level of performance, flexibility,and control for the most demanding applications.Full graphic display with help menusIntuitive, one-touch controlTime and temperature programmingwith data loggingRS-232 Interface –Use with Rheocalc (p7)or RheoVision (p19) SoftwareBuilt-in service reminderFive speed pump controlDigital Controllershave easy-to-use controls. Just dial in yourset-point and push a button, you’re done!LED readout displays set point and fluidtemperature3 adjustable temperature pre-setsUnique rotary control allows rapid set-pointadjustmentsTwo speed pumpTemperature BathsMODELTC-602PTC-602DTC-502PTC-502DTC-202P*TC-202D*TC-102P*TC-102D*TC-351-20°C-20°C-20°C-20°C-20°C-20°C-20°C-20°C-20°CTemperatureRange Low+200°C+150°C+200°C+150°C+150°C+150°C+200°C+150°CN/ATemperatureRange HighControllerProgrammableDigitalProgrammableDigitalProgrammableDigitalProgrammableDigitalN/A* For use at lower temperatures, use the built-in tap water cooling, or use model TC-351 Cooler for control to -20°C.FOR TEMPERATURES HIGHER THAN 80°C, PLEASE CONTACT BROOKFIELD FOR FLUID RECOMMENDATIONS.Note: 1. Specify voltage and frequency when ordering.CoolingRefrigeratedRefrigeratedRefrigeratedRefrigeratedTap Water**Tap Water**Tap Water**Tap Water**N/A0.01°C0.05°C0.01°C0.05°C0.01°C0.05°C0.01°C0.05°CN/ATemperatureStability†LCD/±.25LED/±.5LCD/±.25LED/±.5LCD/±.25LED/±.5LCD/±.25LED/±.5N/ADigital Readout/AccuracyReservoirCapacity6.0 liters6.0 liters6.0 liters6.0 liters10.0 liters10.0 liters6.0 liters6.0 litersN/AInternalWork AreaDxWxH (inches)5 1 /4 x 5 1 /4 x 5 1 /25 1 /4 x 5 1 /4 x 5 1 /25 1 /4 x 5 1 /4 x 5 1 /25 1 /4 x 5 1 /4 x 5 1 /25 1 /4 x 8 1 /2 x 7 3 /45 1 /4 x 8 1 /2 x 7 3 /45 1 /4 x 5 1 /4 x 5 1 /25 1 /4 x 5 1 /4 x 5 1 /2N/AOverallDimensionsDxWxH (inches)15 3 /4 x 8 1 /4 x 22 1 /215 3 /4 x 8 1 /4 x 22 1 /215 3 /4 x 18 3 /4 x 1715 3 /4 x 18 3 /4 x 1715 1 /2 x 10 7 /8 x 14 3 /415 1 /2 x 10 7 /8 x 14 3 /414 1 /4 x 8 1 /4 x 1414 1 /4 x 8 1 /4 x 1417 x 14 x 14Weight(Gross)70 lbs64 lbs78 lbs67 lbs39 lbs33 lbs29 lbs23 lbs72 lbs** Tap water connection required.N/A - Not Applicable† Temperature stability may vary depending on bathvolume, surface area, insulation and type of fluidBROOKFIELD TEMPERATURE CONTROL27

TC-502Circulating Water BathRefrigeratedAvailable with Programmable Controlleror enhanced Digital ControllerProvides stand-alone operation– No tap water requiredEasy control of set-pointConfigured to measure viscosity directly in thebath – accommodates 600 mL beakerProgrammable Controller version is designed toautomate sample temperature controlBuilt-in circulator to pump to external devicesProgrammableController shownProgrammableController shownTC-602Circulating Water BathCompact-RefrigeratedAvailable with Programmable Controlleror enhanced Digital ControllerCompact — small “footprint” on your lab bench,only 8 1/4 inches wideSpecifically designed for use with water-jacketed devices–Wells-Brookfield Cone/Plate–Small Sample Adapter Accessory–Ultra-Low Adapter Accessory–R/S-CC Rheometer–R/S-CPS RheometerProvides stand-alone operation – no tap water is requiredEasy control of set-pointProgrammable Controller version is designed toautomate sample temperature controlBROOKFIELD TEMPERATURE CONTROL28 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

TC-102Circulating Water BathNon-RefrigeratedAvailable with ProgrammableController or enhancedDigital ControllerCompact – small “footprint”Built-in circulator pumpBuilt-in tap watercooling coilPerfect choice foruse with Brookfieldwater-jacketed devices–Wells-Brookfield–Cone/Plate–Small Sample Adapter–Accessory–Ultra-Low Adapter–Accessory–R/S-CC Rheometer–R/S-CPS RheometerTC-202Circulating Water BathNon-RefrigeratedAvailable with ProgrammableController or enhancedDigital ControllerConfigured for measuringmultiple samples directlyin the bathWork areaaccommodates 600 mLand 1000 mL beakers(cover is removable forlarge sample containerrequirements)Built-in tap watercooling coilBuilt-in circulator pumpTC-351 Cooler Not ShownEnhancedDigitalControllershownEnhancedDigitalControllershownWater BathAccessoriesAlgicide 8 oz.TC-Fluid 1Keeps circulator baths clean,odor free and resists black algaeEthylene Glycol 1 gal.TC-Fluid 2 -20°C to +100°CLaboratory grade bath fluidNormally mixed with water at 50:50 ratioHigh Temperature Fluid 1 gal.TC-Fluid 3 +50°C to +150°CTC-Fluid 4 +100°C to +200°CPVS-152 +25°C to +200°CThese Heat Transfer fluids provide superiorthermal stabilityLow Temperature Fluid 1 gal.TC-Fluid 5 -50°C to +58°CExcellent low temperature performanceLittle or no evaporationFor continuous low temperature applicationsBath Cleaner 8 oz.TC-Fluid 6Removes rust and mineral depositsConcentrated liquid18” Lab Stand RodVS-CRA-18SDesigned for increasing viscometer heightwhen measuring in a TC-202 or TC-502 BathEliminates tap water requirements on non-refrigerated bathsIncreases lower range of most baths to –20°C29

Thermosel for Elevated Temperature TestingCompatiblewith standardBrookfieldViscometersand DV-III UltraRheometersNote: requires optionalcable DVP-141Provides controlof sampletemperatureup to +300°CTemperature Rampingbetween set points is possible if used withRheocalc (DV-III Ultra & DV-II+Pro) SoftwareNote: Requires optional cable HT-106Thermo Container(Heating Chamber)Computer Controlledwhen used with DV-II+Pro or DV-III Ultraand Rheocalc32 SoftwareProgrammable Temperature Controlleroffers single set point or up to 10programmable set points.The difficulty with viscosity measurements of hot melts and liquids at elevatedtemperatures has been in maintaining accurate temperature control that isconsistent from sample to sample so that meaningful data could be obtained.The Brookfield Thermosel solves this problem by providing a stable, preciselycontrolled sample environment. This, together with the inherent accuracy ofthe Brookfield Viscometers, is fundamental to the Thermosel System, whichproduces viscosity measurements that are not only accurate but entirelyreproducible.Several factors contribute to the stable environment:Non-fluctuating temperature controlSmall sample volume and insulated sample chamber which reducestemperature gradients within the sampleThe rotating spindle, which acts as a built-in stirring deviceThe test procedure is quite straightforward. Once familiar with the system,unskilled operators can easily produce accurate, reproducible data.What’s Included?Choice of one SC4 SpindleSpecify when orderingAlignment BracketThermo Container with safety guardand insulating cap1 Removable Sample Chamber (p41)5 Disposable Sample Chambers (p41)Order additional chambers in quantities of 100, HT-2DB-10018” Lab Stand RodExtracting ToolsTemperature Controller with an RTD probeApplicationsHot MeltsWaxAsphaltPolymersBROOKFIELD TEMPERATURE CONTROL30 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Additional InformationAlignment Bracket ensuresconcentricity of spindle andsample chamber.SPINDLESAMPLE VOLUMESHEAR RATE (sec -1 MODELLVDV-IIIULVDV-II+PLVDV-IPLVDVELVTRVDV-IIIURVDV-II+PRVDV-IPRVDVERVTHADV-IIIUHADV-II+PHADV-IPHADVEHATHBDV-IIIUHBDV-II+PHBDV-IPHBDVEHBTSC4-188mL1.32N1.2-30K1.5-30K3-10K3-10K5-10KOther components suppliedinclude sample chamberholder, RTD probe, insulatingcap, coupling link, couplingnut and choice of SC4spindle.SC4-3110mL.34N12-300K15-300K30-100K30-100K50-100KSC4-349.5mL.28N24-600K30-600K60-200K60-200K100-200KNot applicable for historical reasons.However, it is possible to use theabove spindles with any of theseinstruments. DigitalViscometers/Rheometers willautomatically calculate viscosity.Please contact Brookfield or anauthorized dealer if you requireinformation on viscosity range.Extracting Tool enablesthe sample chamber to behandled easily and safely.SC4-218mL.93NNot applicable for historical reasons. However, it is possibleto use the above spindles with any of these instruments.Digital Viscometers/Rheometers will automatically calculateviscosity. Please contact Brookfield or an authorized dealerif you require information on viscosity range.20-500K25-500K50-170K50-170K50-100K40-1M50-1M100-300K100-300K100-200K160-4M200-4M400-1.3M400-1.3M400-800KSC4-27*10.5mL.34N100-2.5M125-2.5M250-830K250-830K250-500K200-5M250-5M500-1.7M500-1.7M500-1M800-20M1K-20M2K-6.7M2K-6.7M2K-4MSC4-2811.5mL.28N200-5M250-5M500-1.7M500-1.7M500-1M400-10M500-10M1K-3.3M1K-3.3M1K-2M1.6K-40M2K-40M4K-13.3M4K-13.3M4K-8MOption: Disposable SampleChamber with OptionalDisposable Spindle SC4-27D*is ideal for asphalts or anydifficult-to-clean material.Order disposable SC4-27D spindle inquantities of 100, Part No. SC4-27D-100.Requires special chuck/closer, Part No. SC4-DSY, for attachment to viscometer.Order disposable HT-2DB chambers inquantities of 100, Part No. HT-2DB-100.SC4-2913mL.25N400-10M500-10M1K-3.3M1K-3.3M1K-2M800-20M1K-20M2K-6.7M2K-6.7M2K-4M3.2K-80M4K-80M8K-26.7M8K-26.7M8K-16MHT-DIN-81**7mL1.29N1.0-10K3.4-10K3.4-10KN/A5.7-10K14.6-10K36.5-10K36.5-10KN/A36.5-10K29.2-10K73.0-10K73.0-10KN/A73.0-10K116.8-10K292.0-10K292.0-10KN/A292.0-10K*Optional disposable SC4-27D spindle is available in quantities of 100, Part No. SC4-27D-100. Requires special chuck/closer, Part No. SC4-DSY, for attachment to viscometer.**The 81 spindle, Part No. HT-DIN-81, works in an HT-2 or HT-2DB chamber.31

Small Sample Adapterfor rheological evaluation where sample volume is limitedStandard SampleChamber with embeddedtemperature probeprovides direct temperaturemeasurement of sample9.8.DisposableSample Chamber(Requires SSA-DCUWater Jacket)Complete system shows the DV-II+ProViscometer and Small Sample Adapterwith Circulating Water Bath fortemperature control.6.5.The Small Sample Adapter provides adefined geometry system for accurateviscosity measurements at precise shearrates. Consisting of a cylindrical samplechamber and spindle, the Small SampleAdapter is designed to measure small samplevolumes of 2 to 16 mL, and easily attachesto all standard Brookfield Viscometers/Rheometers.Removable Sample ChamberThe design of the Small Sample Adapterallows the sample chamber to be easilychanged and cleaned without disturbing theset-up of the viscometer or temperature bath.This means that successive measurements canbe made under identical conditions.Temperature ControlThe sample chamber fits into a water jacketso that precise temperature control can beachieved when the Brookfield circulatingtemperature bath is used. The stirring actionof the rotating spindle, plus the small samplevolume, helps to keep the temperaturegradient across the sample to a minimum.Direct readout of sample temperature isprovided using sample chambers withoptional embedded RTD sensor connectedto the DV-I Prime and DV-II+Pro Viscometersand the DV-III Ultra Rheometer. Workingtemperature range for the Small SampleAdapter is from –15°C to 100°C.Cylindrical GeometryThe Small Sample Adapter’s coaxial cylindergeometry provides extremely accurateviscosity measurements at defined shear rates.Disposable Sample ChambersDisposable 13R chambers, for hard-to-cleanmaterials, are available in a kit that comescomplete with 100 chambers and specialsizedwater jacket (Part No. SSA-DCU).Additional disposable chambers can bepurchased in quantities of 100 (Part No. SC4-13RD-100).BROOKFIELD ACCESSORIES32 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

7.MODELLVDV-IIIULVDV-II+PLVDV-IPLVDVELVTRVDV-IIIURVDV-II+PRVDV-IPRVDVERVTHADV-IIIUHADV-II+PHADV-IPHADVEHATHBDV-IIIUHBDV-II+PHBDV-IPHBDVEHBT1.2.Spindle SC4-18Sample Chamber* SC4-13R(P)Sample Volume 6.7mL1.2-30K1.5-30K3-10K3-10K5-10K4.3.12-300K15-300K30-100K30-100K50-100KShear Rate (sec -1 ) 1.32NSpindle SC4-31Sample Chamber* SC4-13R(P)Sample Volume 9.0mLShear Rate (sec -1 ) .34N24-600K30-600K60-200K60-200K100-200KSpindle SC4-34Sample Chamber* SC4-13R(P)Sample Volume 9.4mLShear Rate (sec -1 ) .28NSpindle SC4-16Not applicable for historical reasons.However, it is possible to use theabove spindle/chamber combinationswith any of these instruments. DigitalViscometers/Rheometers willautomatically calculate viscosity.Please contact Brookfield or anauthorized dealer if you requireinformation on viscosity range.Water jacket allows rapid andprecise temperature controlof sampleSample chamber easilychanged - slides into waterjacket and locks in placeSimultaneous sampletemperature measurementis possible by orderingembedded temperatureprobe in sample chamber48-1.2M60-1.2M120-400K120-400K200-400KOptional disposable chamberalso availableShear Rate (sec -1 ) .29NSpindle SC4-25Sample Chamber* SC4-8R(P)Sample Volume 4.2mL192-4.8M240-4.8M800-1.6M800-1.6M800-1.6MSample Chamber* SC4-13R(P)Sample Volume 16.1mLShear Rate (sec -1 ) .22NSpindle SC4-21Sample Chamber* SC4-13R(P)Sample Volume 7.1mLShear Rate (sec -1 ) .93NSpindle SC4-27Sample Chamber* SC4-13R(P)Sample Volume 10.4mLShear Rate (sec -1 ) .34NSpindle SC4-15Spindle SC4-28Sample Chamber* SC4-13R(P)Sample Volume 11.0mLShear Rate (sec -1 ) .28NSpindle SC4-29Sample Chamber* SC4-13R(P)Sample Volume 13.5mLShear Rate (sec -1 ) .25NSample Chamber* SC4-7R(P)Sample Volume 3.8mLShear Rate (sec -1 ) .48NNot applicable for historical reasons. However, it is possible to usethe above spindle/chamber combinations with any of theseinstruments. Digital Viscometers/Rheometers will automaticallycalculate viscosity. Please contact Brookfield or an authorizeddealer if you require information on viscosity range.20-500K25-500K50-170K50-170K50-100K40-1M50-1M100-300K100-300K100-200K160-4M200-4M400-1.3M400-1.3M400-800K100-2.5M125-2.5M250-830K250-830K250-500K200-5M250-5M500-1.7M500-1.7M500-1M800-20M1K-20M2K-6.7M2K-6.7M2K-4MWhat’s Included?1. Water Jacket2. Locating Channel Assembly3. Choice of one SC4 Spindle*4. Choice of one SC4 Sample Chamber*5. Insulating Cap6. Extension Link with Coupling NutStorage Case (not shown)*Specify when orderingOptional Accessories7. Embedded RTD temperature Probe in Chamber8. SC4-13RD Disposable Sample Chambers (p42)Requires special water jacket9. Temperature Bath (p27)For more info on Small Sample AdapterAccessory Kits visit our website.200-5M250-5M500-1.7M500-1.7M500-1M400-10M500-10M1K-3.3M1K-3.3M1K-2M1.6K-40M2K-40M4K-13.3M4K-13.3M4K-8M200-5M250-5M500-1.7M500-1.7M500-1M400-10M500-10M1K-3.3M1K-3.3M1K-2M1.6K-40M2K-40M4K-13.3M4K-13.3M4K-8M400-10M500-10M1K-3.3M1K-3.3M1K-2M800-20M1K-20M2K-6.7M2K-6.7M2K-4M3.2K-80M4K-80M8K-26.7M8K-26.7M8K-16MN/A = Not applicable for historical reasons. However, it is possible to use any spindle/chamber combination with any torque range. Digital viscometers/rheometers will automatically calculate viscosity.* ExamplesSC4-13R Sample ChamberSC4-13RP Sample Chamber with RTD temperature probeSC4-13RPY Sample Chamber with RTD temperature probe and cable to viscometer/rheometer SC4-13RD-100 Disposable Sample Chamber available in packages of 100** Disposable chamber available in 13R size and requires SC4-45YD water jacket500-12.5M625-12.5M1.25K-4.2M1.25K-4.2M1.25K-2.5M1K-25M1.25K-25M2.5K-8.3M2.5K-8.3M2.5K-5M4K-100M5K-100M10K-33.3M10K-33.3M10K-20MSpindle SC4-14Sample Chamber* SC4-6R(P)Sample Volume 2.1mLShear Rate (sec -1 ) .40N33

Enhanced UL Adapterideal for low viscosity materialsReduces measuring range toas low as 1 cP, depending onviscometer usedSimple attachment to astandard Brookfield Viscometeror DV-III Ultra RheometerSmall sample size: 16 mLCylindrical geometry providesdefined shear rates for detailedproduct analysisRemovable cap of low densitypolyethylene can be considereddisposable for one-time use ifrequiredStainless steel parts are easilycleanedThe Brookfield UL Adapter is used withany standard Brookfield Viscometer andRheometer to make accurate and reproduciblemeasurements on low viscosity materials.Newtonian and non-Newtonian materials canbe measured. It is most commonly used withthe LV series instrument (at 60 rpm, thesemodels have a full scale range of 1-10 cP withthe UL Adapter). The UL Adapter consists of aprecision cylindrical spindle rotating inside anaccurately machined tube. Its rheologicallycorrect cylindrical geometry providesextremely accurate viscosity measurementsand shear rate determinations.The tube has a removable end cap whichallows the open ended tube to be used ina beaker or tank. With the cap in place, theclosed tube can be immersed in a temperaturebath or used with the ULA-40Y water jacketfor precise temperature control. Workingtemperature range is from –15°C to 100°C.Why replace your currentUL Adapter?The new design saves a significant amount oftime on set up and tear down of equipment.The new spindle with universal connector iseasier to thread onto the viscometer.The entire assembly can remain in placebetween tests with only the chamber beingremoved to prepare the next sample fortesting.LVT, LVDV-ELVDV-IP, LVDV-II+PLVDV-IIIU1.0 - 2KRVTRVDV-ERVDV-IP6.4 - 2KRVDV-II+PRVDV-IIIU3.0 - 2KHATHADV-EHADV-IP12.8 - 2KHADV-II+PHADV-IIIU6.0 - 2KHBTHBDV-EHBDV-IP51.2 - 2KHBDV-II+PHBDV-IIIU24.0 - 2KK = 1 thousandBROOKFIELD ACCESSORIES34 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Quick & Easy Design Saves TimeQuick & easyattachment of spindle:1.2.3.Longer coupling nut for better gripand twist action to connect spindle toviscometer.Redesigned bracket for attaching ULAassembly to viscometer. Provides moreclearance for finger grip on coupling nut.Quick & easyremoval of chamber:Simply loosen thumbwheel, chamber slidesdown and out.Permits rapid testing of multiple samplesby swapping out chambers.Choice of leaving spindle attached toviscometer or disconnecting spindle andremoving it with chamber.Water jacket sleeve remains in placeattached to viscometer while chamberand/or spindle only are removed. Saves setup time for the operator.Unique ULA Assembly Design ProvidesMultiple Benefits:Sturdy collar attaches to locating channel assembly which isconnected to viscometer pivot cup.Sample chamber is held firmly in place by the collar which providesproper alignment for the spindle rotation within the chamber.Universal coupling nut on spindle ensures firm connection withviscometer and automatic self-centering of spindle in chamberduring rotation.Direct immersion of chamber in temperature bath is quick and easy.Water jacket grips slide over collar and operator manually aligns thecollar/jacket assembly to allow easy insertion of chamber containingsample to be tested.4.6.Detail of UL Adapter: 1. Locating ChannelAssembly, 2. Water Jacket, 3. Chamber Tube,4. Collar with thumbwheel, 5. Tube End Cap,6. Spindle with universal couplingWhat’s Included?Locating Channel AssemblySpindle (304 s/s) (p40)with universal coupling nutCollar assembly with thumbwheelWater JacketChamber TubeTube End Caps (package of 6)Optional Accessories5.Closed Tube andSpindle made from 316 s/s35

Helipath Standdesigned for measurement of non-flowing substancesFor viscosity/consistency measurement ofgels, pastes, creams, putty, gelatin and othernon-flowing substances.A Brookfield Viscometer or Rheometer ismounted on the Helipath drive motor and aT-bar spindle is attached to the viscometerusing a special coupling. The drive motorslowly lowers or raises the viscometer sothat the T-bar spindle creates a helical paththrough the test sample thus eliminating theproblem of “channeling”.Compatible with standard BrookfieldViscometers and DV-III Ultra RheometersSimple to set up and cleanProvides a solution for hard-to-measurematerialsComplete with drive motor, 6 T-bar spindleswith coupling, case, lab stand, rod and baseThe Helipath Stand can be used with anystandard Brookfield Viscometer model, andis supplied complete with a set of six T-barspindles and a special coupling.LV Viscosity RangeRV Viscosity RangeHA Viscosity RangeHB Viscosity RangeDIAL, DV-E, DV-IP DV-II+P DV-IIIU156 - 3,120K2K - 20M4K - 40M16K - 160M156 - 9,360K2K - 100M4K - 200M16K - 800M156 - 9,360K2K - 100M4K - 200M16K - 800MBROOKFIELD ACCESSORIES36 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Vane Spindlesfor foods, cosmetics, sealants……for use with paste-like materials, gels and fluids wheresuspended solids migrate away from the measurementsurface of standard spindles.Minimal disruption of sample during spindle immersionKeeps particles in suspension during testing cycleViscosity data includes complete flow curve analysis when software is usedProvides information on yield behavior at low rotational speedsFollows industry recommendations on length/diameter ratios forvane spindles3-piece spindle set for versatile range capabilityOptional V-74 and V-75 spindles for even greater range capability andimmersion into small size sample containersVane Spindle RangesSPINDLEV-71V-72V-73V-74V-75V-71V-72V-73V-74V-75V-71V-72V-73V-74V-75V-71V-72V-73V-74V-75V-71V-72V-73V-74V-75TORQUERANGESHEAR STRESSRANGE (Pa)VISCOSITY RANGENOT RECOMMENDED FOR USE ON LV TORQUELVLVLVLVRVRVRVRVRVHAHAHAHAHAHBHBHBHBHB5xHB5xHB5xHB5xHB5xHB.188-1.88.938-9.389.38-93.83.75-37.5.5-52-2010-100100-1K40-4001-104-4020-200200-2K80-8004-4016-16080-800800-8K320-3.2K20-20080-800400-40004K-40K1.6K-16K104.04-1.04K502-5.02K5.09-50.9K1.996K-19.96K262-2.62K1.11K-11.1K5.35K-53.5K54.3K-543K21.3K-213K524-5.24K2.22K-22.2K10.7K-107K108.6K-1.086M42.6K-426K2.096K-20.96K8.88K-88.8K42.8K-428K434.4K-4.344M170.4K-1.704M10.48K-104.8K44.4K-444K214K-2.14M2.172M-21.72M852K-8.52MNote: 1. 1 Pa = 10 dyne/cm2 2. Viscosity Range is given at rotational speed of 10 RPM3. 5xHB is the highest torque range available 4. Not for use with DV-E ViscometersThe instrument shown is a DV-III Ultra.These spindles also work well with otherBrookfield Viscometers.V-73V-71V-72Brookfield Vane Spindle SetIncludes V-71, V-72, and V-73 vane spindles.See the individual specifications in thespindle section. (p42)Optional V-74 and V-75 spindles are smaller insize than V-73.37

DIN AdapterComplies with DIN 53019 requirements for testgeometry. DIN is the German equivalent to the U.S.ASTM Standards.Designed to provide an alternative for thosecustomers having limited sample volume. Requires16 mL to 20 mL sample size.Cylindrical geometry providesdefined shear rates.Comes with threespindles and chambers formeasurementrange of 1 to50,000 cP.LVT1.9 - 37.9KLVDV-ELVDV-IP1.2 - 37.9KLVDV-II+PLVDV-IIIU1.0 - 50KRVTRVDV-ERVDV-IP12.2 - 50KRVDV-II+PRVDV-IIIU5.0 - 50KHATHADV-EHADV-IP24.4 - 50KHADV-II+PHADV-IIIU10.0 - 50KHBTHBDV-EHBDV-IP97.6 - 50KHBDV-II+PHBDV-IIIU40.0 - 50KSpiral AdapterDesigned for measuring the viscosity of heavypaste-like materials such as solder paste, cosmetics,pharmaceuticals, food products and other nonflowingproducts. Provides variable shear rates fordetecting pseudoplastic and thixotropic behavior.The spiral adapter is mounted onto a BrookfieldViscometer; with the chamber immersed in thetest sample and the motor turned on, material is“pumped thru” and reaches a steady flow rate.Shear rate is 0.677 sec -1 per rpm.Spiral AdapterRanges cP(mPa•s)LV SeriesRV SeriesHA SeriesHB Seriesto 100Kto 1.1Mto 2.2Mto 9.0MK = 1 thousand M = 1 million cP = CentipoisemPa•s = milliPascal•secondsCompatible with standard Brookfield Viscometersand DV-III Ultra RheometersCompatible with electronics industry solder pastespecificationsComplete with chamber, two spindles, assemblyclamp and caseNote: RV/HA/HB torque ranges recommendedBROOKFIELD ACCESSORIES38 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Spindles(available as an option)LV-1LV-2LV-3LV-4LV-2CLV-3CLV-5RV-1HA/HB-1RV-2HA/HB-2SPINDLE RANGE*LV-1 15 - 20KLV-2 50 - 100KLV-3 200 - 400KLV-4 1K - 2MLV-5LV-2CLV-3C* Based on Standard LV speeds .3 - 60 rpmM = 1 million K = 1 thousandNote: LV-1 through LV-4 are supplied with LV instruments.LV-2C & LV-3C are optional “cylindrical spindles” offering geometry for calculating shear rates.LV and RV/HA/HB spindles are supplied in 302 stainless steel.Optional 316 stainless or teflon coated spindles are availableSPINDLERV-1**HA/HB-1**RV-2HA/HB-2RV/HA/HB-3RV/HA/HB-4RV/HA/HB-5RV/HA/HB-6RV/HA/HB-72K - 4M50 - 100K200 - 400KLV-5 is an optional spindle designed to increase measuring range.RANGE*RV SERIES100 - 20K100 - 20K100 - 80K100 - 80K100 - 200K200 - 400K400 - 800K1K - 2M4K - 8MRANGE*HA SERIES200 - 40K200 - 40K200 - 160K200 - 160K200 - 400K400 - 80K800 - 1.6M2K - 4M8K - 16MRANGE*HB SERIES800 - 160K800 - 160K800 - 640K800 - 640K800 - 1.6M1.6K - 3.2M3.2K - 6.4M8K - 16M32K - 64M* Based on standard RV/HA/HB speeds .5-100 RPM.M = 1 million K = 1 thousandNote: LV and RV/HA/HB spindles are supplied in 302 stainless steel.Optional 316 stainless or teflon coated spindles are available** This spindle available as an optionRV/HA/HB-3RV/HA/HB-4RV/HA/HB-5SPINDLE RACKSR-23YRV/HA/HB-6RV/HA/HB-7RV/HA/HB Spindle Set includes spindles #2 - #7 and is suppliedwith standard Brookfield Viscometers and Rheometers.Spindle #1 is available as an option.Spindle Rack is also available as an option with both LV andRV/HA/HB spindle sets.39

SpindlesCPE-44YCPE-40CPE-41CPE-42CABLE SC4-61YCPE-51CPE-52Wells/Brookfield Spindles & CupsSPINDLECPE-40CPE-41CPE-42CPE-51CPE-52CUPCPE-44YCPE-44PYPCPE-3YPCPE-6YPCPE-4YPCPE-7YSHEARRATE7.50N sec -12.00N sec -13.84N sec -13.84N sec -12.00N sec -1SAMPLEVOLUME.5 mL2.0 mL1.0 mL.5 mL.5 mLCONEANGLE.8°3°1.5°1.5°3°Standard cup without temperature probeStandard cup with RTD temperature probeCup with 1 purge fittingCup with luer fitting and 1 purge fittingCup with luer fitting and 2 purge fittingsCup with luer fitting and 4 purge fittingsNote: 1. Wells-Brookfield cones and cups are calibrated at the factory.Cones ordered after shipment require cups to be returned for calibration to new cone.2. See page 12 for viscosity rangesCONERADIUS2.4cm2.4cm2.4cm1.2cm1.2cmCAP-XXCAP SpindlesSPINDLECAP-01CAP-02CAP-03CAP-04CAP-05CAP-06CAP-07CAP-08CAP-09CAP-10SHEARRATESAMPLEVOLUME13.3N sec -15.0N sec -1 170 µL13.3N sec -1 38 µL13.3N sec -1 24 µL3.3N sec -1 134 µL3.3N sec -1 67 µL3.3N sec -1 30 µL2.0N sec -1 1700 µL2.0N sec -1 400 µL2.0N sec -1 100 µLCONEANGLE0.45°0.45°0.45°1.8°1.8°1.8°3.0°3.0°3.0°1.2°Note: 1. Recommend ordering calibration fluids specific to cone for field calibration2. See page 15 for viscosity rangesCONERADIUS1.511cm1.200cm0.953cm1.200cm0.953cm0.702cm2.399cm1.511cm0.953cm1.511cmYULA-15EDIN-85UL Spindles & ChambersSPINDLEYULA-15(E)YULA-15(E)ZULA-31(E)YULA-35(E)YZTYPESpindle - 304 stainless steelSpindle - 316 stainless steelSample Chamber - 304 stainless steelSample Chamber - 316 stainless steelNote: 1. See page 34 for viscosity ranges2. (E) represents enhanced UL version (introduced Jan. 2006)DIN SpindlesSPINDLEULA-DIN-85ULA-DIN-86ULA-DIN-87HT-DIN-81 for ThermoselSC4-DIN-82 for SSASC4-DIN-83 for SSACHAMBERULA-DIN-6YDAA-1SHEARRATE1.29N1.29N1.29N1.29N1.29N1.29Nfor use with ULA-DIN-86 and 87for use with ULA-DIN-8540 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.comSAMPLE SHEARVOLUME RATE16mL16mLSAMPLEVOLUME17.0 mL6.5 mL2.0 mL7.0 mL1.5 mL1.5 mL1.224N1.224NN = rpm

SpindlesPVS CHAMBERPVS SPINDLECHAMBER RACK HT-54CC3-XXRC3-XX-XV3-80-40SC4-XXBS SOLID SHAFT*SC4-XX LINK HANGINGHT-2HT-2DB-100PVS Spindles and ChambersBOBB1B2B5CHAMBERPVS-30 (standard)Triple AnnulusR/S SpindleSPINDLECOAXIALVISCOSITYRANGE (Pa•s)DG0.002-19CC3-40 0.004-134CC3-25 0.026-883CC3-14 0.151-5035CC3-8 0.813-27111CONERC3-25-1 0.061-2037RC3-25-2 0.122-4074RC3-50-1 0.008-255RC3-50-2 0.015-509RC3-75-1* 0.002-75RC3-75-2* 0.005-151PLATERP3-25 0.373-12450RP3-50 0.023-779RP3-75* 0.005-153VANEVANESPINDLE LENGTH (mm)V3-80-40 80V3-60-30 60V3-40-20 40V3-30-15 30V3-20-10 20V3-10-5 10Thermosel Spindles and ChambersLink hanging configuration is standardSPINDLESC4-18SC4-31SC4-34SC4-21SC4-27**SC4-28SC4-29HT-DIN-81*SC4-XXBS = Solid Shaft. Not available for SC4-18 and SC4-21 spindles**Also available as SC4-27D-100 = Disposable spindle, 100 unitsCHAMBERHT-2HT-2DB-100Note: See page 31 for spindle rangesSHEARRATE1.32N.34N.28N.93N.34N.28N.25N1.29NSHEARRATE1.7N0.38N0.85NSAMPLEVOLUME23 mL53 mL40 mLfor use with B1, B2 or B5 spindlefor use with PVS - TA5 B5 - D - HCRS Rheometers with serial numbers beginning with “302” and“303” use different spindles. Call for details.SHEAR MAX. SHEARRATE STRESS4-4344 sec -1 83 Pa2-2148 sec -1 287 Pa1-1291 sec -1 1140 Pa1-1291 sec -1 6500 Pa1-1291 sec -1 35000 Pa6-6000 sec -1 12223 Pa3-3000 sec -1 12223 Pa6-6000 sec -1 1528 Pa3-3000 sec -1 1528 Pa6-6000 sec -1 453 Pa3-3000 sec -1 453 Pa1-1309 sec -1 16297 Pa3-2618 sec -1 2040 Pa4-3927 sec -1 600 PaVANEDIAMETER (mm)40302015105SAMPLEVOLUME8.0 mL10.0 mL9.5 mL8.0 mL10.5 mL11.5 mL13.0 mL7.0 mLSHEARTYPESample Chamber - Reuseable, stainless steelSample Chamber - Disposable, aluminum, 100 unitsSAMPLEVOLUME21mL45mL17mL3mL0.5mL0.08mL0.3mL0.7mL1.5mL2.0mL3.9mL0.5mL2mL4.5mLSTRESS6-200 Pa15-505 Pa51-1700 Pa120-4000 Pa408-13600 Pa3276-109200 Pa*For use with water bath version only1 Pa•s = 1,000 cPNotes: 1) Values based on minimum speed of 1 RPM and maximum speed of 1000 RPM2) 75 mm plates cannot be used with Peltier Plate or electrically heated rheometers41

SpindlesKREBS SPINDLE KU1-10PASTE SPINDLE KU1-75YSC4-27SD SOLID SHAFT**SC4-27 LINK HANGINGCABLE SC4-61YSC4-13RPYSC4-13RDKU-2 SpindlesSPINDLEKU1-10KU1-75YTYPEStandard Krebs SpindleOptional Paste SpindleSmall Sample Spindles and ChambersSPINDLESHEARRATESAMPLEVOLUMESC4-181.32N6.7 mLSC4-13RD-100 † Sample Chamber - Disposable, aluminum, 100 unitsSC4-31SC4-34SC4-16SC4-25SC4-21SC4-27SC4-15SC4-28SC4-29SC4-14SC4-DIN-82SC4-DIN-830.34N0.28N0.29N0.22N0.93N0.34N0.48N0.28N0.25N0.40N1.29N1.29N9.0 mL9.4 mL4.2 mL16.1 mL7.1 mL10.4 mL3.8 mL11.0 mL13.5 mL2.1 mL1.5 mL1.5 mLCHAMBER TYPESC4-13RSC4-13RPYSC4-8RSC4-8RPYSC4-7RSC4-7RPYSC4-6RSC4-6RPYSample Chamber w/o temperature probeSample Chamber w/RTD temperature probe & cableSample Chamber w/o temperature probeSample Chamber w/RTD temperature probe & cableSample Chamber w/o temperature probeSample Chamber w/RTD temperature probe & cableSample Chamber w/o temperature probeSample Chamber w/RTD temperature probe & cableNote: See page 33 for spindle/chamber ranges**Solid shaft option available for spindles SC4-21 (Part No. SC4-21SD) and SC4-27 (Part No. SC4-27SD).† Requires the use of special water jacket SC4-45YDT-BAR SPINDLE T-A THRU T-FCHUCK/WEIGHT/CLOSER ASSEMBLY BTU-18YSPIRAL ADAPTER SPINDLE SA-70T-Bar Spindles cP(mPa•s)SPINDLE LVT-A 156 - 62.5KT-B 312 - 124.8KT-C 780 - 312KT-D 1.5K - 624KT-E 3.9K - 1.5MT-F 7.8K - 3.1MRV2K - 400K4K - 800K10K - 2M20K - 4M50K - 10M100K - 20MSpiral Adapter SpindleSPINDLESA-70Note: See page 38 for rangesCHAMBERSA-1YVane SpindlesSPINDLEV-71V-72V-73V-74V-75VANELENGTH (in)2.7081.706.998.463.63242 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.comV-71HA4K - 800K8K - 6M20K - 4M40K - 8M100K - 20M200K - 40MVANEDIAMETER (in)1.354.853.499.232.316HB16K - 3.2M24K - 6.4M80K - 16M160K - 32M400K - 80M800K - 160MM = 1 million K = 1 thousandNote: Container diameter should be twice (2x) the vane diameter when possible. See page 37 for ranges.

Options & Specialty ItemsMVS-1Y4B2ABZSP1-UC-YYDX-1SP1-UC-YEXTENSION LINKSP-7Y QUICK CONNECT COUPLINGSP-4 SP-3SP-5MVS-1Y Flag Impeller SpindleUse with the Small Sample Adapter to help keep samplematerials in suspension4B2 SpindleRequired for viscosity testing in accordance withASTM D2983 (Low Temperature Viscosity Measurement ofAutomotive Fluid Lubricants)ABZ SpindleUsed for viscosity testing of thick film pastes.Short spindle length is suitable for immersion into shallowdepth containers. Sensing length of spindle is less than 1-inch.Custom SpindlesCustom spindles can be developed to meetyour particular test requirements.Contact Brookfield or an authorized dealer for details.Type D Extension LinkSPINDLEYDX-1SP1-UC-YSXV-XXTYPEMale coupling nut; attaches to spindleFemale coupling nut; attaches to viscometerExtension link; see below for lengthsType S Extension LinkSPINDLEAvailable in LV-4 and RV/HA/HB spindle configurationsExtensionLINKSXV-08SXV-09SXV-24SXV-32SXV-48SXV-80SXV-96LENGTH1"1.12"3"4"6"10"12"Note: Other lengths available; call for detailsUSED WITHUL AdapterSmall Sample AdapterThermoselType D/S ExtensionType D/S ExtensionType D/S ExtensionType D/S ExtensionQuick Connect Coupling (SP-7Y)PARTSP-3SP-4SP-5coupling to viscometer/rheometercoupling to spindlesleeve (to hold together)43

Options & Specialty ItemsModel A Lab Stand: Dial, DV-EModel S Lab Stand: DV-I Prime, DV-II+Pro, YR-1All standard viscometers — and the YR-1 Rheometer — aresupplied with either a Model A or Model S Laboratory Stand.These traditional stands move the viscometer up and down byturning the knob on the rod and clamp assembly. The clampitself has been newly redesigned to allow for an easier, moreergonomic grip.MODEL ALAB STANDQuick Action Lab Stand:Optional purchase for Dial, DV-E, DV-I Prime, DV-II+Pro & YR-1Taking measurements hasnever been so fast or easy!With the push of a button,the instrument moves up anddown the lab stand, quickerand easier than ever before.The Quick Action Lab Standis perfect for busy labenvironments, especiallythose with multipleoperators or multiplesamples. This stand isavailable as an option fornew Dial, DV-E, DV-I Primeand DV-II+Pro Viscometersand is also compatible withexisting models.MODEL QLAB STANDMODEL SLAB STANDEZ-Lock Spindle Coupling SystemQuickly and more safely changespindles with this spring-loadedspindle coupling attachment.Attach the EZ-Lock SpindleCoupling to a spindle and insertthe spindle into the chuck. That’sit! Changing spindles has neverbeen quicker or easier...makingthis the perfect option for busylabs with multiple samples to test.EZ-Lock can be purchased as anoption for new DV-I Prime and DV-II+Pro Viscometers as well as theDV-III Ultra Rheometer. It can alsobe retrofitted to your existing DV-Iand DV-II series Viscometer as well as any of yourDV-III series Rheometers.EZ-Lock is also available for use with your favoriteBrookfield accessories such as the Thermosel andHelipath Stand as well as the following adapters: Small SampleAdapter, UL Adapter, Enhanced UL Adapter, and DIN Adapter.** Special brackets may be required to accommodate the length of the EZ-Locksystem; requirement can be determined at time of ordering.Ball Bearing OptionIf your viscometer or rheometer is used by multiple operatorsor in a busy lab environment, a more durable ball bearingsuspension system may help keep your instrument incalibration longer with less “down time”. This option can beordered at the time of purchase and is also available as aretrofit to existing instruments. The Ball Bearing Option isavailable for DV-I Prime and DV-II+Pro Viscometers as well asDV-III Ultra Rheometers, including Cone/Plate versions.**** This option is for the torque ranges of RV, HA, and HB only - it is not available forinstruments in the LV torque range.Annual Service ContractPromote longer life for your new viscometer by purchasingan Annual Service Contract. This complete, preventativemaintenance program will ensure your instrument runs atoptimal performance. We will handle all of the administrativedetails, including contacting you when the instrument is duefor its annual calibration and certification service. Contact ourCustomer Sales and Service Department for more details.**Available for instruments bought in the United States only.44 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Complimentary Torque DecalsNow you can quicklyidentify the torquerange of your standardBrookfield Viscometer/Rheometer witheasy-to-read decals.The decals provide aconvenient labelingsystem for your lab orproduction personnel.The label sheet comeswith pressure-sensitivedecals, two large andtwo small for LV, RV, HAand HB torque ranges.The small decals fit onthe instrument faceplateand the large decalsthe on the side, back or top of the instrument. These freedecals are also available for CAP series Viscometers.Protective Instrument CoversBrookfield protective instrumentcovers are designed to shieldyour instrument from dust anddirt in the most challengingenvironments. These covers arealso ideal in situations wheresample testing materials mayaccidentally be spilled on theinstrument and cause damage.Protective instrument coversquickly slip over the viscometer/rheometer protecting boththe front and sides of theinstrument. The clear, seethroughmaterial allows the use of the keypad while the coveris in place on DV-I+/DV-II+/CAP series Viscometers and DV-IIIseries Rheometers.Protective Keypad CoversProtect your keypad againstdirt, scratches, spillage anddust with these “peel and stick”protective covers. They are idealfor instruments with multipleusers and for busy, high trafficwork areas. These flexibleprotective covers are packagedin quantities of 10 and areavailable for DV-I series, DV-IIseries, CAP series, DV-III series,YR-1, VTE series and AST-300SYtouch screen controller models.The Brookfield WebsiteLooking for more information? Then the Brookfield websiteis the place to visit. Here you can download manuals, MSDSs,article reprints, and brochures. Find representatives in yourarea or register your instrument online. Find out when ourpopular training series will be in your area or watch ournew, free online videos. The website is updated frequentlyso there’s always something new to discover at www.brookfieldengineering.com.45

Viscosity StandardsBrookfield Viscosity Standards provide a convenient, reliableway to verify the calibration of your Brookfield LaboratoryViscometer/Rheometer. Brookfield Viscosity StandardsSilicone Viscosity StandardsThese fluids are most commonly used to verify calibration ofBrookfield Viscometers/Rheometers.Accuracy: ±1% ofviscosity valueExcellent temperaturestabilityRecommended for usewith Brookfield andmost other rotationalviscometersMost economicalSpecial viscosity valuesand temperaturecalibrations availableupon requestVisCal KitThe Brookfield VisCal Kit provides all thenecessary items to verify calibration of yourViscometer/Rheometer. Includes Brookfield600mL Beaker, 1 pint of Silicone ViscosityStandard, Dispersing Bottle for cleanup andTrapper Cleaning Agent (available only in USA).are Newtonian, and they are available as either silicone or oil.Silicone fluids are less temperature sensitive than oil fluids.Note: Brookfield recommends that all fluids be replaced annuallyGeneral Purpose Silicone FluidsBrookfieldPart #5 cps10 cps50 cps100 cps500 cps1000 cps5000 cps12500 cps30000 cps60000 cps100000cpsNominal ViscositycP (mPa•s) Temp °C510501005001,0005,00012,50030,00060,000100,00025.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°CHigh Temperature Silicone FluidsBrookfieldPart #HT30000HT60000HT100000Nominal ViscositycP (mPa•s) Temp °C Temp °F30,0009,0004,50060,00018,0009,000100,00030,00015,00025.0°C93.3°C149.0°C25.0°C93.3°C149.0°C25.0°C93.3°C149.0°C77°F200°F300°F77°F200°F300°F77°F200°F300°FSpecial Order Silicone FluidsFor our customers needing a nonstandard viscosity ortemperature range, our silicone fluids can be modified to meetmost requirements.Viscosity Blends Calibrated at 25°C (77°F)Minimum: 5 cP (mPa•s)Maximum: 60,000 cP (mPa•s)Blends will be within ±2% of requested valueTemperature CalibrationsMinimum: 10°C (50°F)Maximum: 80°C (176°F)Minimum temperature increment: 2°CBROOKFIELD ACCESSORIES46 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Oil Viscosity StandardsThese fluids are used for specific instrumentsusing cone/plate or Krebs spindle geometry.Also, certain industries may require use of oilstandards.Accuracy: ±1% of viscosity valueAppropriate for use at shearrates greater than 500 sec-1Recommended for use withcone/plate Viscometers atviscosities above5,000 cPRecommended forBrookfield CAP seriesand KU-2 Viscometersand R/S RheometersBrookfield oil viscositystandards are hydrocarbonbased, eithermineral oil or polybutenesNote: Other oil fluids are available – call for detailsBrookfield Viscosity Standards are accurate to ±1% of thestated viscosity and are certified by methods traceable to theUnited States National Institute of Standards and Technology(NIST). The selection of one or two fluids will normallyprovide sufficient measurement points to verify calibrationof your instrument. All fluids are supplied in 1/2 liter (1 pint)containers complete with a certificate of calibration. CAP OilFluids are supplied in 150 mL (4 oz) containersFree jar openerwith thepurchase oftwo or moreviscositystandards.CAP Viscometer Oil FluidsFor calibrating CAP Series cones each spindle has its own fluidHOW TO SELECT A CAP FLUID• Determine which viscometer is being used: High Torque or Low Torque.• Determine which temperature model is being used:Low Temperature (5°C-75°C) or High Temperature (50°C-235°C)• Determine which cone is being used.HIGH TORQUE CAPLOW TORQUE CAPLow Temp 25°C High Temp 60°C Low Temp 25°C High Temp 60°CConeSpindle12345678910BrookfieldPart #CAP1LCAP2LCAP3LCAP4LCAP5LCAP6LCAP7LCAP8LCAP9LCAP10LViscositycP (mPa•s)891773547081,4173,5421,3285,31321,250236BrookfieldPart #CAP1HCAP2HCAP3HCAP4HCAP5HCAP6HCAP7HCAP8HCAP9HCAP10HViscositycP (mPa•s)891773547081,4173,5421,3285,31321,250236BrookfieldPart #CAP0LCAP1LCAP2LCAP3LCAP4LCAP5LCAP1LCAP3LCAP5LCAP2LViscositycP (mPa•s)57891773547081,417893541,417177BrookfieldPart #CAP0HCAP1HCAP2HCAP3HCAP4HCAP5HCAP1HCAP3HCAP5HCAP2HViscositycP (mPa•s)57891773547081,417893541,417177Krebs Viscometer Oil FluidsBrookfield Nominal ViscosityPart # Krebs Units Temp °CKU61KU73KU87KU99KU106General Purpose Oil FluidsBrookfieldPart #B29B200B600B1060B2000B10200B21000B73000B200000B36000061738799106Nominal ViscositycP (mPa•s) Temp °C292006001,0602,00010,20021,00073,000200,000360,00025.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°C25.0°CR/S Rheometer Oil FluidsSpindleC25-1C50-1C50-2C75-1C75-2BrookfieldPart #B41000B10200B41000B4900B4900Nominal Viscosity Temp °C41,00010,20041,0004,9004,90025.0°C25.0°C25.0°C25.0°C25.0°C47

What is texture analysis?Texture analysis is primarily concerned with the evaluationof mechanical characteristics where a material is subjectedto a controlled force from which a deformation curve of itsresponse is generated. These mechanical characteristics infood can be further sub-divided into primary and secondarysensory characteristics which have proven to be correlatedto sensory perception.Primary CharacteristicsPARAMETER SENSORIAL DEFINITION INSTRUMENTAL DEFINITIONHARDNESSSPRINGINESSADHESIVENESSCOHESIVENESSForce required to compress a food between molars.Defined as force necessary to attain given deformation.Rate at which a deformed material goes back to its undeformedcondition after deforming force is removed.The work necessary to overcome the attractive forces betweenthe surface of the food and the surface of other materials withwhich the food comes into contact (e.g. tongue, teeth, palate).Work required to pull food away from a surface.The strength of internal bonds making up the body of theproduct (greater the value the greater the cohesiveness)Peak force of the first compression cycle.Height that the food recovers during thetime that elapses between the end of thefirst bite and the start of the second bite.The negative area for the first bite,representing the work necessary to pullcompressing probe away from sample.The ratio of positive force during the secondto that of the first compression cycle(downward strokes only)Secondary CharacteristicsPARAMETER SENSORIAL DEFINITION INSTRUMENTAL DEFINITIONBRITTLENESS(Fracture force)GUMMINESSCHEWINESSForce at which a material fractures. Related to the primaryparameters of hardness and cohesiveness, where brittlematerials have low cohesiveness. Not all foods fracture andthus value may relate to hardness if only single peak is present.Brittle foods are never adhesive.Energy required to disintegrate a SEMI-SOLID food product to a stateready for swallowing. Related to foods with low hardness levels.Energy required to chew a SOLID food product to a statewhere it is ready for swallowing. attribute is difficult toquantify precisely due to complexities of mastication(shear, compression, tearing and penetration).The first significant break in the firstcompression cycle.Calculated parameter:Product of Hardness x CohesivenessCalculated Parameter:Product of Gumminess x Springiness(essentially primary parameters ofHardness x Cohesiveness x Springiness)*Parameters utilized in determining the manner in which a food handles and behaves in the mouth.PARAMETERS AS DENOTED WITHIN ORIGINAL SZCZESNIAK et al (1963) AND BOURNE (1978) TPA WORKBROOKFIELD TEXTURE ANALYZER48 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Why measure texture?Consumer products succeed in the marketplace in partbecause their “textural characteristics” are pleasing tocustomers. This is certainly true with food products but it alsoapplies to cosmetics, pharmaceuticals, packaging, industrialmaterials and even adhesive type materials.ApplicationsQuality Control, Product Development and R & DFoodDairyYogurtButterCheeseBakeryDoughBreadPastrySnack FoodsChipsGranolaBarsConfectionsMeatBeefPoultrySeafoodFruit andvegetablesCosmeticsLipstickMascaraPowdercompactsEye liner pencilsCreamsSoap barsPharmaceuticalsGelatinsTablet hardnessOintmentAdhesive dressingMaterialsPackagingAdhesivesCaulkingRubberGreaseWaxWhy Choose Brookfield?Brookfield has over 75 years experience in providing reliable,low cost viscosity measuring instruments while offering highquality product support. We are now using this recipe forsuccess to expand our line of physical testing products toinclude texture analyzers.The Brookfield Texture Division provides customers with acomplete texture assessment service. We specialize in thedevelopment of novel and innovative test applications andaccessories for solid and semi-solid materials, enabling ourcustomers to maximize the practical value of their texturestudies within all test environments.Utilizing simple compression or tension forces, we are able toimitate almost all conditions imposed during the manufactureor handling of a wide range of foods, industrial materialsand personal care products. Such measures provide a “reallife” insight into the physical properties of a product, ofteninvaluable in maintaining consistent quality manufacturewhile minimizing rejects in production.Brookfield’s redesign of the CT3 (formerly known as LFRA)enhances the load capacity and test speeds of the old model,which evolved from the Stevens range of Texture Analyzersand further back to the Boucher Jelly Tester.PropertiesMeasuredRipenessYield PointSpreadabilityTackinessConsistencyRelaxationPliabilityAdhesivenessChewinessFracture ForceElasticityHardnessCohesivenessBurst StrengthBreaking PointGel StrengthApparent ModulusGumminessBrookfield now offers a complete bath system for processinggelatin samples in batches of 12 Bloom bottles. Thissystem complies with GMIA and GME gelatin processingrequirements, and the Brookfield Bloom bottles arerecognized by both organizations.49

CT3 Texture Analyzercompression and tension testing for rapid QC analysisNEW Tension Modeprovides tensile testing capabilityNEW Additional Load CellsSeven measurement ranges up to 50kgAn extensive history andcustomer input have contributedto the development of the mostpowerful, low cost, stand-aloneTexture Analyzer ever produced.With six test modes (pluscalibration check) and a widechoice of accessories, no othertexture analyzer has ever doneso much without a computerand software!Easy-to-Read Backlit DisplayEasy-to-Use Intuitive ControlsUSB Computer InterfaceNEW Choice of Base Tablesallows for larger samples andmore accessory choicesStandard Test ModesNormal Test:a single compression cycleHold Time Test:compress and holdCycle Count Test:compress multiple timesBloom Test:gelatin bloom strength testTPA Test:texture profile analysisTension Test:tensile testingStatic Load Test:calibration checkFixture Base TableNEW Texture LoaderNEW Texture Loader softwareallows adding up to ten customtests to suit your everydayapplicationsRotary Base TableNEW Increased Probe Travel Distancewith more space for larger samplesBROOKFIELD TEXTURE ANALYZER50 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

What’s Included?Instrument with choice of load cellNEW Texture Loader SoftwareUSB CableThe probes and fixtures shown here are just a small selection from ouroptional accessories. Brookfield can develop custom equipment to meetmost any texture measurement application.Optional AccessoriesThe CT3 has a wide variety of probes, fixturesand jigs which enable it to be very versatile.Brookfield can also custom design a fixtureand probe for most applications.Choice of Base TableSnap Test JigDual Grip AssemblyOttawa CellTexturePro CT SoftwareGelatin Bath System for sample conditioningBloom Jar - industry approvedTemperature ProbeTexturePro CT SoftwareOptionalCollect data and perform detailed dataanalysis with real-time graphic plotting.Cylinder ProbeAOAC Probe(Bloom Gel Test)Extrusion CellEasily create custom reports and graphs rightfrom the menu screen.• Sample identification set-up screen helpsnew operators quickly get started; testfields outline a variety of parameters• Intuitive set up for test methods and databasefile structures in a single window• Data is captured as a graph and stored intabular database format• Advanced data analysis with builtinparameter calculations such asspringiness, chewiness, hardness andmuch more!Junior PunchAccessoryAdjustable Vice JigSmall ScaleShear BladeMODELCT3-100CT3-1000CT3-1500CT3-4500CT3-10kgCT3-25kgCT3-50kgLoad Range/Resolution*0-100g/0.01g0-1000g/0.10g0-1500g/0.20g0-4500g/0.50g1-10000g/1.0g1-25000g/1.0g2-50000g/2.0gALL CT3 MODEL SPECIFICATIONSSpeed:RangeAccuracyPosition:RangeResolutionAccuracyg = grams kg = kilograms*Accuracy = ±0.5% Full Scale Range (FSR) mm = millimeter s = seconds0.01-0.1mm/s (increments 0.01mm/s)0.1 - 10mm/s (increments 0.1mm/s)±0.1% of setpoint0-100mm0.01mm0.1mm51

SSB: Starch ApplicationsRecommended viscometer choicesRVDV-II+ProViscometer (p6)or RVDV-III UltraRheometer (p16)Ball BearingSuspension (p44)HADV-II+Pro Viscometer (p6)or HADV-III Ultra Rheometer (p16)Ball Bearing Suspension (p44)TC-112P ProgrammableWater BathTC-102 Water Bath (p29)Small Sample Adapter (p32)SC4-27 Spindle (p42)SC4-13RPY Sample Chamberw/RTD probe (p42)TT-200 ProcessViscometer (p64)Small SampleAdapter (p32)SC4-21 SpindleSC4-13RPYSample Chamberw/RTD probe (p42)TT-100 ProcessViscometer (p62)Chocolate ApplicationsRecommended viscometer choicesR/S-CC PlusRheometer (p22)The SSB (Starch System Brookfield) is designedto monitor the viscosity of industrial starchesduring automated quick-cook (gelatinization)and fast cool-down of starch samples.TT-100 Process Viscometer is used for real timestarch measurements in paper coatings andadhesives manufacturing.Lab Features & BenefitsFast, reproducible results means productionadjustments can be made immediately.Automated, easy-to-compare test resultsusing Optional SoftwareProgrammable temperature control +35°C to+95°CProcess Features & BenefitsEnsures correct viscosity of end productControls coating thickness during applicationMeasuring chocolate viscosity is importantto the confectioner in order to help optimizechocolate flow properties in a meltedcondition for various mixing and coatingapplications.Lab Features & BenefitsDetermines Casson yield and Plastic ViscosityConforms to NCA and Bureau of the TechnicalCommittee Office Internationale du Cacao etdu Chocolat.Control of melting temperatures assuringreproducible comparisonsEasy to clean, easy to operateProcess Features & BenefitsProvides real time chocolate viscositymeasurement and controlBROOKFIELD SYSTEMS52 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Paints, Coatings & Ink ApplicationsRecommended viscometer choicesCAP 2000+Viscometer (p14)KU-2Viscometer (p26)TT-100 ProcessViscometer (p62)AST-100 ProcessViscometer (p60)Brookfield has viscometers that havebeen designed specifically for use in Paintand Coating applications. Whether yourrequirement is to duplicate results from aKrebs system with the KU-2, simulate behaviorat high shear with the CAP, or to measureand control viscosity with the AST-100 orthe TT-100 Process Viscometers, we have thesolution.Lab Features & BenefitsEasy to clean, easy to operateInstant results, no calculations meansfewer errorsEnsure coating qualityLong term reliable performanceEconomically pricedProcess Features & BenefitsProvides continuous measurementand controlGuarantees consistent coating qualityMinimize operating costs with less wasteAsphalt ApplicationsRecommended viscometer choicesRVDV-II+ProViscometer (p6)or RVDV-III UltraRheometer (p16)Thermosel (p30)SC4-27Spindle (p42)ProgrammableController (p30)TT-100 ProcessViscometer (p62)R/S-CPS PlusRheometer (p21)Specific test methods for measuring theviscosity of highway asphalt “binders” atmixing and compacting temperatures usingBrookfield’s Thermosel System have beendefined by SHRP, the Strategic HighwayResearch Program, sponsored by the USGovernment. New methods are also underinvestigation to ensure consistent asphaltquality during processing using Brookfield’sTT-100 in-line Process Viscometer.Lab Features & BenefitsAdheres to ASTM Spec D4402Ensures asphalt pumpabilityProvides multiple temperature and shear ratevariables for complete viscosity profilesProcess Features & BenefitsImmediate adjustment of process operationsto avoid out-of-spec materialsVerify asphalt binder spec without grabsamples53

Personal Care Products ApplicationsRecommended instrument choicesR/S-CPS PlusRheometer (p21)TT-100 ProcessViscometer (p62)Shampoos and lotions need to flow easily yetretain sufficient thickness. Viscosity analysisand temperature profiling are importantQC tools to use in confirming the desiredbehavioral properties. The Brookfield R/S-CPS Rheometer, or any standard BrookfieldRheometer/Viscometer, is important forcomprehensive data analysis while the TT-100Process Viscometer provides in-line viscositycontrol during processing.Lab Features & BenefitsSmall sample volumeRapid temperature control with R/S-CPSProcess Features & BenefitsCorrelation with lab dataConsistent product qualityExtrusion CellCT3TextureAnalyzer (p50)The physical consistency of face creamsand cosmetic ointments is one of the mostimportant subjective characteristics of theseproducts. Following extrusion principles, theCT3 Texture Analyzer can displace the semisolidgel of cream or ointment in a controlledmanner, revealing the yield and flowcharacteristics of the product.Texture Features & BenefitsSimple, reliable operation for QC or factoryenvironmentReal-life measure of sample responseMultiple characteristics from a single testBROOKFIELD SYSTEMS54 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Electronics Paste ApplicationsRecommended viscometer choicesHBDV-II+Pro Viscometer (p6)Spiral Adapter (p38)Ball Bearing Suspension (p44)The rheological properties of solder paste affect behaviorduring application to electronic assemblies. This includesdispensing operations and flow characteristics during screenand stencil printing. The Brookfield RVDV-I Prime Viscometerwith Helipath Stand and T-bar spindle provides single pointviscosity measurement for QC control. The Brookfield HBDV-II+ Pro Viscometer with Spiral Adapter offers an automatedtest method for total flow curve evaluation.Lab Features & BenefitsSpindle can be inserted directly into paste containerMethods comply with IPC test specificationsR/S-CPS PlusRheometer (p21)RVDV-I Prime Viscometer (p8)Model D Helipath Stand (p36)Pharmaceutical ApplicationsRecommended instrument choicesMost ointments need to be sufficiently thick when standingto prevent them from oozing away from the intended areaof use. They also need to flow easily when applied (knownas shear thinning behavior). The R/S-CPS Rheometer is theideal instrument to measure high viscosity at near zero shearrate to determine yield stress values and to create viscosity vs.shear rate flow curves which simulate rubbing and spreading.Lab Features & BenefitsSmall sample volumeAutomated test methodRapid temperature equilibrationEasily cleaned and maintainableCT3TextureAnalyzer (p50)The physical properties of tablets and capsules are a criticalcharacteristic to both ease of manufacture and productfunctionality. The hardness of a tablet or the strength of a gelcapsule will have an effect on drug release rate in the body.Tests for hardness serve as a QC indicator at the point ofpacking or filling. The CT3 and its associated test accessoriescan accommodate variable geometries of capsules andtablets while maximizing the value of data obtained fromtexture investigations.Texture Features & BenefitsMultiple applications with single instrumentRapid measurement of physical properties, such as tablethardness and gelatin strengthStand-alone or PC operation55

Petroleum ApplicationsFor exploration, lab research or drilling/fracturing sitefluid monitoring, Brookfield handles your viscosity needsRecommended viscometer choicesPVS Rheometer (p18)PVS RheometerFracturing fluids, drilling muds, cements and oil/wateremulsions are examples of materials easily analyzed.Compact and portable, the PVS offers the oil and gas industrythe most versatile instrument of its kind.Features & BenefitsViscosity measurements under pressure and elevatedtemperatureAutomate standard test proceduresEasily cleaned and maintainedTT-220 ProcessViscometer(p65)TT-100 ProcessViscometer (p62)LVDV-II+ProViscometer (p6)TT-100 & TT-220Well fracturing operators require in-line viscosity control toensure the proper rheology of the fracturing fluid being sentdown-hole. The TT-100 in-line Viscometers provides real-timemeasurements of fluids in pressurized lines from storagetanks through blenders before pumping down-hole. Themultiple speed TT-220 provides real-time drill mud viscositydata that allows rig operators to obtain yield point and plasticviscosity continuously.Features & BenefitsCharacterizes drilling fluid viscosity and maintains consistencyEliminates “grab” samples; saves time, provides repeatablemeasurementsLVDV-II+Pro ViscometerFor field engineers at the well site, a simple bench-topLaboratory Viscometer ensures a quick and easy way tocheck fracturing fluid viscosity before use. The BrookfieldLVDV-II+Pro Viscometer with special cylindrical spindlesprovides coaxial cylinder geometry measurement, simulatingappropriate shear rate conditions.Features & BenefitsCompact size and versatile for use in the laboratoryor field environmentsSimulates low shear conditionsBROOKFIELD SYSTEMS56 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Dairy Products ApplicationsRecommended instrument choicesR/S-SST PlusRheometer (p23)CT3TextureAnalyzer (p50)LVDV-I PrimeViscometer(p8)UL Adapter(p34)Model DHelipathStand (p36)AST-100FSY ProcessViscometer (p61)The dairy industry has a broad range ofproducts requiring viscosity and texturemeasurement, from milk and creams toyogurts and butters. Brookfield offers aselection of instruments to ensure consistentproduct quality, flow/spread behavior, andmouth-feel.Lab Features & BenefitsAccommodates homogenous liquids tomixtures with particlesGuarantees customer satisfaction becausequality is repeatableTexture Features & BenefitsSimple, easy-to-implement test methodsWide choice of probes to simulate customerexperience in handling/consumptionof productProcess Features & Benefits3A approved designedReal-time process controlAdhesives ApplicationsRecommended instrument choicesThermosel (p30)RVDV-I Prime Viscometer (p8)Model D Helipath Stand (p36)RV or HBDV-II+ProViscometer (p6)ProgrammableController (p30)HBDV-III Ultra CPRheometer (p16)AST-100 ProcessViscometer (p60)Adhesives can vary significantly inviscosity. In-process flow behavior duringmanufacturing may have lower viscosityvalues compared to end-point conditions.Final product viscosity can be modest witheasy flow capability to paste-like consistency,requiring high force to apply to a substrate.Choosing the proper test method is critical.Lab Features & BenefitsMultiple choices for “best-fit” instrumentand spindleGuarantees consistent end product frombatch-to-batchSmall sample size (

Sauces & Dressings ApplicationsRecommended instrument choicesRVDV-I Prime Viscometer (p8)Model D Helipath Stand (p36)R/S-SST PlusRheometer (p23)CT3TextureAnalyzer (p50)Maintaining consistent food quality andrepeatable flow behavior is imperative inthe food industry — especially in saucesand dressings. Whether the product will bepoured, squeezed from a bottle or used forcoating, designing the right test method iskey.Lab Features & BenefitsMultiple instrument/spindle choices to suitmost applicationsEconomically priced to meet low budgetrequirementsQuick, single point viscosity tests often meetthe objectiveTexture Features & BenefitsQuick, easy method to quantify flow out of thebottle or tubeRugged, easy-to-use instrument for use on theproduction floorConstruction MaterialsRecommended viscometer choicesRVDV-II+Pro Viscometer (p6)Spiral Adapter (p38)RVDV-III UltraRheometer (p16)Vane Spindle (p39)R/S-SST PlusRheometer (p23)Vane Spindle (p37)The construction industry manufactures awide range of materials with medium to highviscosity. New methods are available with theintroduction of spindle geometries that canhandle the mix of product materials rangingfrom cements, concretes, mortars and groutsto various clay mixtures.Lab Features & BenefitsMultiple spindle types can be used with thesame instrument minimizing investment costYield stress test gives more information thantraditional “slump test”Flow curves are quickly generated to showcomplete shear thinning behavior forconsistent quality performanceBROOKFIELD SYSTEMS58 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Why Measure Viscosity In-Line?Why Measure Viscosity In-Line?Practical application of viscosity measurement data often leadsto the need for in-process control of viscosity. The installation ofviscosity control equipment on a process can provide a level ofcontrol achievable by no other means. Variations in viscosity aredetected and corrected instantly before they can negatively affectproduct quality. Real time viscosity control can reduce downtimeand material waste by ensuring that the process is operating withinits specified viscosity parameters. In many cases, the savings fromincreased efficiency can pay back the cost of the viscometer in onlya few months.Why Choose Brookfield?Brookfield builds its Process Control Viscometers to thesame high standards of performance and value as itsLaboratory Viscometers. Particular attention has beendevoted to making these instruments rugged and easyto maintain for long service in demanding industrialenvironments.AST-100Advanced sensortechnologyfor direct inlineviscositymeasurement (p60)TT-100For in-line systemapplicationsrequiring pipelinemounting (p62)TT-200For in-line systemapplicationsrequiring flangemounting (p64)TT-220ProbeFor both solventand water basedproducts (p65)ViscoselFor systemsopen to theatmosphere (p66)Questions to Consider1. What is the viscosity range of your material?2. Is your material Newtonian, Dilatant, Non-Newtonian,Thixotropic or Plastic?3. What is the minimum, maximum and average pressurerequirement of your application?4. What is the minimum, maximum and averagetemperature of your application?5. What is the minimum, maximum and average flow rateof your application?6. Where in production would you like the viscometer:in-line, on the top of the tank or on the side of the tank?7. What electrical code requirements do you have:NEMA 1 (general purpose—indoor)NEMA 4 (watertight/dust tight for indoor/outdoor use)NEMA 7 (explosion proof—Class 1, Div. 1&2, Group D)ATEX (explosion proof—Code: EE x d 11B T6)The above parameters may eliminate some of theinstrument models because, for example, the viscosity ishigher than the range of the instrument or outside of thepressure rating of the instrument. In many cases, more thanone instrument may be applicable.Please allow us to assist you in choosing the best viscositycontrol system for your application.59

AST-100 Viscosity ControllerAdvanced Sensor Technology for simple, directin-line viscosity measurementRugged 316 SSconstructionNo moving partsto wear, bind orcontact processmaterialsContinuous, reliable4-20 mA, RS232 orRS485 outputCompact designfor easy installationAssembly GuidesAST-100Available in food grade andexplosion-proof designsSaves you moneywhile increasingyour productionAvailable with sensor andcontroller or as sensor onlyCapable of pressuresup to 200 psi (13.8 bar)and temperatures up to250°F (120°C)Product OutletViscosity Sensor& ChamberSimple Clean-In-Place designProduct InletProbe StyleThis design allowsfor insertion into thetank from above.Flange MountFlange mount designs areavailable to allow directmounting onto a process tankthrough a sidewall flange.BROOKFIELD PROCESS VISCOMETERS60T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

What’s Available?Instrument in Nema 4, Nema 7, ATEX,Sanitary or pH Control Configurations(see page 3 for optional configurations)Optional AccessoriesSingle Station ControllerMulti-Station ControllerMounting BracketsSolenoid Control ValveViscosity Standards (p48)Protective Covers for AST-300SY (p3)12”10”5”5”AST-100FSYSanitary UnitProcess Viscosity ControllersThe AST-300SY Single Station Viscosity Controller andAST-400SY Multi-Station Viscosity Controller are designed foruse with Brookfield AST-100 Systems to accurately measureand control viscosity.– Precise, programmable, on/off dosing control– Intuitive screen layout– Quick selection of setup and menu items– At-a-glance set point and alarm status– Displays viscosity in cP, mPa•s, cSt or cup-seconds,current pH value and temperature in °C or °F– Viscosity and pH data trending– pH and pump interlock– Multi-level password protection– Viscosity high/low alarmsAST-300SY Single Station Viscosity ControllerThe AST-300SY Single Station Controller is designed for usewith the Brookfield AST-100TSY as part of the viscosity controlsystem to measure viscosity and temperature, interlock withother process devices, and accurately control the viscosity ofyour product in a variety of industrial applications.Sensor-onlyOption:Economicallypriced, sensortransmitterdesignfor simpleequipmentintegration.AST-300SYSingle Station ControllerAST-400SY Multi-Station Viscosity ControllerThe AST-400SY Multi-Station Controller is designed for usewith up to ten Brookfield AST-100TSY viscosity control unitsas part of a multi-product viscosity control system. The systemwill measure viscosity and temperature, interlock with otherprocess devices, and accurately control the viscosity of yourproducts in a variety of industrial applications.AST-400SYMulti-Station ControllerAST-100VibratingProbeSensorCompact design for easy installation61

TT-100 Viscometerfor in-line system applicationsSTT100 conforms to 3A sanitary conditionsand has clean-in-place (CIP) designDefined shear meansagreement with BrookfieldLaboratory measurementsat equivalent shear ratesConstant speed orvariable speed motorSTT-100Sanitary UnitContinuous measurementeliminates need for “Grab”sampling and allows for predictionand constant control of finalproduct propertiesTorque Sensorgives 4-20 mALinear SignalShear Rates 10-1,000 sec -1Concentric cylinders (Couette type)provides defined shear measurement4-20mA output signal provides a variety ofdisplay and control capabilitiesMounts in-linesupported by connectionsMeasurement “Zone” is protected frommain flow, allowing accurate, repeatablemeasurement under variable conditionsAvailable in 1”, 1-1/2”, 2” or 4”pipeline connections; threadedor flanged, or 3” or 4” sanitaryEasy to checkand maintain calibrationCapable of pressures up to 500psi (34 bar) and temperaturesup to 500°F (260°C)Can be operated at shearrates of 511 sec -1 for AmericanPetroleum Institute (API)measurement needsBROOKFIELD PROCESS VISCOMETERS62T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

What’s Available?Instrument in Nema 4, Nema 7 (explosionproof Class I, Division 1 & 2, Group D design),ATEX or Sanitary ConfigurationsOptional AccessoriesOptional 12V or 24V DC operationReadout IndicatorVariable Speed MotorTT-100Standard instrument forgeneral serviceTT-100VSOptional variable speedinstrument for multipleshear rates63

TT-200 Viscometerfor in-line system applicationsSynchronous orvariable speeddrive motorDefined shear meansagreement with BrookfieldLaboratory measurements atequivalent shear ratesSignal transducerhousingWhat’s Available?Instrument in Nema 4 or Nema 7 (explosionproof Class I, Division 1 & 2, Group D design)ConfigurationsOptional AccessoriesOptional 12V or 24V DC operationReadout IndicatorVariable Speed MotorContinuous measurementeliminates need for “Grab”sampling and allows for predictionand constant control of finalproduct propertiesCapable of pressures up to 500psi (34 bar) and temperaturesup to 500°F (260°C)Mounting flangeFlushing fittingoptionalFlange mountabledirectly into tank orin pipeline teeConcentric cylindersprovide defined shearmeasurement 4-20mAoutput signal providesa variety of display andcontrol capabilitiesShear Rates 10-1,000 sec -1Rugged 300 SSconstructionCan be operated at shearrates of 511 sec -1 for AmericanPetroleum Institute (API)measurement needsRepeatable to ±.5% of spanBROOKFIELD PROCESS VISCOMETERS64 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

TT-220 Probe Viscometerfor direct in-tank measurementLight enoughto be hand heldOptional 3-speedmotor driveConcentric Cylindersprovide definedshear measurementContinuous, quick,linear responseModularfor easy removalor insertionDefined shearmeasurementWhat’s Available?Instrument in Nema 4 or Nema 7 (explosionproof Class I, Division 1 & 2, Group D design)ConfigurationsOptional AccessoriesReadout Indicator/ControllerHelps reduceproduction andoperating costsContinuous linear4-20mA outputAdjustable supportfor immersion depthOptimizes productquality throughautomatic controlMinimum operator involvementrequired for start-upProvides permanent recordof production historyOperates at -40°C to 100°CMounts in opentank or container11”, 17”, 24”, 30” and 38”probe lengths availableOptional controllerprovides viscosity set-point,monitor and control65

Viscosel Seriesfor systems open to the atmosphereIn-lineautomaticviscositycontrolDigital DisplayOutput signal4-20mAEconomicallypricedNEWVTE-250ViscometerSelectable readoutdirectly in cP orunits of choice(cup seconds or otherengineering units)New Easy to UseControlsSimple to install,start up, operateand cleanWhat’s Available?VTE-250 In-Line ViscometerOptional AccessoriesSample chambers, plastic or stainless steel (p68)Solenoid Control Valve (p68)Solvent Bottle (p68)Test Stand, stationary or with wheels (p68)Mounting Brackets (p68)Additional SpindlesViscosity Standards (p46)Protective Keypad Covers (p45)UniversalmountingbracketSample Chamber– Durable andeasily cleaned– Available inplastic orstainless steelViscosity Range:10-10,000 cP(mPa• s)Easy viscosity range changecan be made without specialtools or recalibrationAutomatically operateswith 90-264 VAC, 47-63 Hz20 watts power supplyQuick ConnectFittingsBuilt-in control feature:(up to 3 amp solenoid relay)BROOKFIELD PROCESS VISCOMETERS66 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

VTA-120ViscometerComplete in-lineautomatic viscositycontrol systemEasy-to-readIndicator– Responsive– ContinuoussensingSolventor wateradditionmadedirectly intothe samplechamberthroughbuilt-in valveSolvent valvegaugeBuilt-in viscosityindicatorOptionalcup-secondsindicatorViscosity Range:1-4,000 cP(mPa• s)Built-In, easily-readset pointindicator/controllerSimple to install,start up, operateand cleanWhat’s Available?VTA-120 In-Line ViscometerOptional AccessoriesSample chambers, plastic or stainless steel (p68)Solenoid Control Valve (p68)Solvent Bottle (p68)Test Stand, stationary or with wheels (p68)Mounting Brackets (p68)Additional SpindlesViscosity Standards (p46)Output signalwith pneumaticindicator 3-15 psi(.20-1 bar) or 4-20mAwith converter,0-15 psi (0-1 bar) tosolvent valveOperates on 20-22 PSIG(1.4-1.5 bar) air inputwith 3.5 CFM maximumconsumptionEasy viscosity range changecan be made without toolsor recalibrationNo electrical componentssafe for solvent environmentsSample Chamberavailable in plastic orstainless steel67

Used withTT-100 SeriesViscometersSB-10YSolvent BottleSB-1YSolvent BottleHolderTT-100-2894-20mA InputSignal IndicatorVTA 106-212AYSolvent LineAssemblyVTA 106-104AYAir Set AssemblySCV-1HYSolvent ControlValveVTA 106-155YSolenoid ValveAssemblyVTA 107-2Support BracketSB-248” ColumnSB-3Y BaseVTA 107-44SInlet QuickConnectUsed withViscosel SeriesViscometersVTA 107-33TSample ChamberVTA 107-45OutletQuick ConnectVTA 107-36TSample ChamberVTA 107-44Inlet QuickConnectSB-23YPipe StandAssemblyUsed withProbe SeriesViscometersSB-9Y Portable BaseBROOKFIELD PROCESS VISCOMETERS68 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Testing & ConsultingViscosity Testing Services AvailableTest and RecommendA simple evaluation designed to help determine the appropriate Brookfieldequipment for your application.Fluid ProfilingAnalysis testing to determine properties of your fluid sample. We willsupply a complete report on the characteristics of your sample.Dispute ResolutionAnalysis testing for mediating a resolution between producers and/orsuppliers obtaining varying viscosity results of the same material.Brookfield’s state-of-the-art laboratory offersa variety of viscosity testing services capableof measuring Newtonian and non-Newtonianfluids using a wide range of spindle geometries.Detailed test results include equipment andmeasurement system description, viscosity datawhich includes appropriate tables and graphs, andany recommendations pertinent to your specificmaterial and associated method.Multiple Sample TestExpands the capability of your laboratory by utilizing Brookfield’s services toaccomplish testing work on a timely basis.Viscosity Test Services are performed for a fee with the exception of “Testand Recommend”.For more information, contact our Rheology Laboratory:Tel: 800.628.8139 or 508.946.6200, ext. 144Fax: 508.946.6262E-mail: testing@brookfieldengineering.comThe key to successful quality control is designingeffective viscosity test methods. Our MethodologyConsulting Service brings a Brookfield consultingengineer to your facility to review and recommendappropriate test methods for your materials. Wewill work with you to define acceptable viscositybehavior taking into consideration relevantshear rates, shear stresses, temperature and timesensitivity issues.Methodology Consulting Service OnViscosity Test Development*A detailed report will include:–Sample preparation method–Equipment recommendations–Controlled shear rate and shear stress tests–Temperature profiling–Thixotropic testing–Material structure recovery evaluation–Data collection and reporting–QC viscosity control limit valuesFor more information, contact our Consulting Services Department:Tel: 800.628.8139 or 508.946.6200, ext. 143Fax: 508.946.6262E-mail: consult@brookfieldengineering.com*Note: Consulting Services can also be scheduled to take place at Brookfield’s facility inMiddleboro, MA69

Calibration & Certification…for long life and optimalperformance of your Viscometer,Rheometer and Texture AnalyzerViscosityStandardsFluids shouldbe replacedannuallySee pages 46 & 47for details.For your viscometers andrheometers, we will inspectyour instrument for wear,clean, adjust and lubricatethe internal mechanisms,replace part of the sensingsystem element (the pivotsupport assembly and, when required, the pointershaft), and check your spindles. Spindles thatare returned to a Brookfield Service Center arealso straightened if necessary. In addition to thismaintenance, we calibrate and certify in writingthat your instrument is operating within properBrookfield specifications. This certification statesthat your instrument has been calibrated againststandards which are traceable to the NationalInstitute of Standards & Technology (NIST). This isbecoming an increasingly important requirementas industry throughout the world takes steps tocomply with ISO 9000 regulations.For texture analyzers, we also inspect for wear,clean, adjust and lubricate internal mechanisms,and adjust, if necessary, the zero and span forproper load cell performance. Certified calibrationweights can be purchased for your textureanalyzer.Brookfield Service CenterCalibration and CertificationBrookfield Engineering recommends that you return your instrument toBrookfield or an authorized dealer on an annual basis for our Calibration andCertification Service. Please call for a Return Authorization Number.Special Arrangements:Loan instruments are available should you need a temporary replacement whileyour instrument is in for service. Contact Brookfield or an authorized dealer.Twenty-Four and 48 hour rush service can be arranged. Call for details.Ball Bearing Retrofit for RV/HA/HB torque range on DV-I Prime, DV-II+ or Proand DV-III+ or UltraContact the Customer Service Department for complete details:T: 800.628.8139 or 508.946.6200 E-mail: service@brookfieldengineering.comOutside the United States, contact our authorized representatives. See Pages 73-75 for acomprehensive list.Brookfield On-Site ServiceCalibration and Certification*We now offer On-Site Calibration and Certification Service. Ideal for multipleinstrument users, this service allows all your instruments to be serviced atyour facility by our trained technician in one convenient visit.Benefits include:–Minimal production disruption–Reduced down time–No shipping damage or costs–Expert on-site advice in preventative maintenanceFor more information, contact our Field Service Specialists:T: 800.628.8139 or 508.946.6200 E-mail: onsite@brookfieldengineering.com*Note: Spindle straightening not performed on-site. Spindles mustbe shipped to Brookfield Engineering in Middleboro, MAIQ, OQ, PQ for Brookfield ProductsFor those customers in specific industries who need documented validationof installed instrument systems we offer a number of approaches. Call fordetails or go to www.brookfieldengineering.com.Ball Bearing Suspension OptionSee pages 44 for details.EZ-Lock Spindle Coupling SystemSee pages 44 for details.70 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

EducationPractical Courseon Texture AnalysisA single-day course designed to provide a betterunderstanding of texture analysis as well as thepractical use of Brookfield Texture Analyzers. Thiscourse addresses:– Principles of texture analysis– Considerations for successfulinstrumental measurements– An overview of accessories andtheir applications– Proper texture testing measurements– Developing test methodPractical Course on Viscosity MeasurementsA single-day course designed to address the major concerns about Brookfieldrotational viscosity measurements. At this course, you will learn:– Principle of Operation: How the viscometer makes measurements– Calibration: The truth about calibration checks– Rheology: Why fluids change their flow behavior and why you needto understand it– Methodology: How to write a method everyone can live with — and use– Data Interpretation: What all the viscosity data really meansTwo options for attendance are offered:Option #1: At Brookfield, Middleboro, MA– Provides hands-on lab time, small class size and the opportunityto test your sampleOption #2: At major metropolitan areas– Regionally located for convenience– Limited hands-on time with your fluidWho are the instructors?Experienced presenters from the technical staffof Brookfield Engineering Laboratories lead eachseminar.What else?Customers are encouraged to bring samples oftheir material for discussion with prior approval.Course Attendees will receive a course workbookand Brookfield Training Certificate for their trainingrecords.Note: Classes can be presented at the customer’s site. Pleaseask for information regarding this option.For more information on the schedules or to register fora course, contact the Customer Training Department atBrookfield:Tel: 800.628.8139 or 508.946.6200Fax: 508.946.6262E-mail: edu@brookfieldengineering.comAdvanced Course on Rheology Test MethodsA single day course designed to use real sample testing data to determinebest methodology. At this course you will address:– Flow behaviors and how to characterize method development– Controlled stress vs. controlled rate measurements– Measuring yield stress, creep and recovery of product structure after flow– Math modeling for advanced data analysis– Measuring viscosity on-line in your processThis course is being offered once per calendar quarter and only at Brookfieldin Middleboro MA. Includes hands-on lab time working with your sample todevelop best practice test methodology.71

GlossaryViscosity Glossary3Aa US industrial standard for process equipmentdesign; required certification for clean-in-placecapability.Absolute Viscositythe viscosity value associated with aNewtonian materialASTMAmerican Society of Testing and MaterialsAutorangemaximum viscosity value that can be measuredusing a specific spindle at a designed rpm.bobspindle used with PVS Rheometer;also referred to as “bob/stator” because it does notrotate on this instrument. The sample cup rotatesinstead, causing the shearing action.Concentric Cylindera cylinder within a cylinder. For viscositymeasurement, a cylindrical spindle rotates withina cylindrical chamber. Also known as “CoaxialCylinder” because both cylindershave the same center line.DINDeutsche Industrie Normung, Germanorganization responsible for establishing teststandards; similar to ASTM in United States.dyne•cma unit of measurement for torque.Footprintthe bench space or area required for an item ofequipment.Gapthe distance between the spindle and thechamber or cup in which the spindle is rotating.Guard Legthe protective bracket for spindles supplied withstandard Brookfield LV and RVViscometers/Rheometers.In-lineprocess viscometer placement in a pipe.NISTNational Institute of Standards and Technology.US Government organization for test standards.Newtoniana material whose viscosity value is the same at allshear rates.Non-Newtoniana material whose viscosity changes as shear ratechanges.On-lineuse of a process viscometer to provide continuousviscosity measurement of a material.Pneumaticair operatedPPplate and plate geometry.Relative Viscositythe viscosity value of a non-Newtonianmaterial at a defined shear rate.RPMrotations per minute; a unit of measurement forspindle speed.RTDresistance thermal detector; type of sensorfor measuring temperaturesec -1the scientific unit of measurement for shear rate;expressed as “reciprocal seconds” or “inverseseconds.”Shear Ratethe velocity gradient in a flowing material;the shape and rotational speed of the spindlerotating in a chamber or cup are used tocalculate shear rate.Shear Stressthe force per unit area used to move a material.Spindle Geometrythe shape of a spindle. Brookfield spindlessupplied with standard Viscometers/Rheometers(Dial Reading, DV-E, DV-I Prime, DV-II+Pro, DV-III+)are disc type. Other choices include Cylindrical,Cone, Plate, KREBS, etc.Torque Rangethe torque measurement capability of a BrookfieldViscometer/Rheometer measured in dyneocm;designations such as LV, RV, HA or HB are used todefine the Torque Range for a specific instrument.Torque %the amount of torque resistance measured by arotating spindle immersed in a material.Yield Stressthe amount of force required to cause amaterial to flow.Texture Analysis GlossaryCompression Testingthe sample is “compressed” with a probe of greatersurface area to that of the sample.Deformationthe change in height of a sample whena force is applied.Extrusion Testingthe sample is compressed until flow commencesthrough an outlet. Texture analysis utilizesboth forward (forced through an aperture) andbackward extrusion (forced back around thecompressing probe).72 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.comPenetration Testingthe sample is “penetrated” with a probe of smallersurface area than that of the sample. This createsboth shear and compression forces within thesample and provides a good indication of producthardness and consistency.Shear Testingblades or wires are utilized to cut throughthe sample and evaluate cross-sectionedcharacteristics using a combination ofcompression, shear and tearing forces dependantupon the geometry of the cutting fixture.Snap Testingused to assess the fracture and bendcharacteristics of solid materials supportedat either end and compressed in its center.Stress Relaxationsample is compressed to a target distance andheld for a period of time. The sample relaxesunder constant stress and the rate and degree ofrelaxation is used to evaluate sample elasticity,freshness, etc.Tension Testingthe sample is fixed to both the base and thetraveling beam of the texture analyzer and“stretched” via an upward movement.Conversion TablesViscosity1 cP = 1 mPa•s1 P = 100 cP1 Pa•s = 1,000 mPa•sSample Volume1 L = 1000 mL1 mL = 1000 µL1 gal = 8 pt. = 3.7 L1 pt = 16 oz.Torque RangeLV = 673.7 dyne•cmRV = 7,187 dyne•cmHA = 14,374 dyne•cmHB = 57,496 dyne•cm5xHB = 287,480 dyne•cm1N•m = 10 7 dyne•cmTemperature°C =5 (°F-32) _9Texture1 Kg = 1000 g1 Kg = 9.8 N1 inch = 2.54 cm1 cm = 10 mmPlease refer to Brookfield’s publication“More Solutions to Sticky Problems” for adetailed explanation of viscosity and Brookfieldmethodology for making measurements.

Brookfield DealersDOMESTIC DEALERSL = Laboratory P = ProcessALABAMATOTAL EQUIPMENT, INC. – LBrewton, AL 36426Tel: (251) 809-3076E-mail: totalequip@bellsouth.netARIZONAPHOENIX INSTRUMENTATION, INC. – L,PPhoenix, AZ 85021Tel: (602) 393-3045E-mail: EthanM@iwestco.comWebsite: www.iwestco.comCALIFORNIACFM-SF, INC. – L,PMartinez, CA 94553Tel: (925) 370-1500E-mail: EthanM@iwestco.comWebsite: www.iwestco.comGOLDEN STATE CONTROLS – PIrvine, CA 92618Tel: (949) 559-1941E-mail: EthanM@iwestco.comWebsite: www.iwestco.comPACIFIC PROCESS INC. – LNewhall, CA 91322Tel: (661) 424-1690E-mail: pacificprocess@gmail.comCOLORADOCFM - PROCESS CONTROLS LLC – PLakewood, CO 80214-2403Tel: (303) 232-4996E-mail: EthanM@iwestco.comwww.iwestco.comROCKY MOUNTAIN SCIENTIFICSOLUTIONS – LColorado Springs, CO 80921Tel: (719) 484-0045E-mail: rmssinc@aol.comWebsite: www. rmscientificsolutions.comFLORIDAPALM BEACH SCIENTIFIC – LWellington, FL 33414Tel: (561) 792-3396E-mail: larry.unger@palmbeachscientific.comWebsite: www.palmbeachscientific.comPAUL N. GARDNER COMPANY – LPompano Beach, FL 33060Tel: (954) 946-9454 (800) 762-2478E-mail: gardner@gardco.comWebsite: www.gardco.comGEORGIAHORTON INSTRUMENT CO., INC. – PAtlanta, GA 30305Tel: (404) 231-3131E-mail: hicatl@mindspring.comILLINOISBROOKFIELD ENGINEERING LABS. – L,PMt. Prospect, IL 60056Tel: (847) 368-8472E-mail: d_larson@brookfieldengineering.comwww.belusa.comLOUISIANAPETRO-CHEM EQUIPMENT CO. – PBaton Rouge, LA 70816Tel: (225) 292-8400E-mail: kevin@petrochemequipment.comWebsite: www.petrochemequipment.comMARYLANDBYK-GARDNER USA – LColumbia, MD 21046-2729Tel: (800) 343-7721 (301) 483-6500E-mail: Info.BYK.GardnerUSA@altana.comWebsite: www.byk.comMASSACHUSETTSPROCESS EQUIPMENT &TECHNOLOGIES, INC. – L,PHanover, MA 02339Tel: (781) 871-5843E-mail: petinc@earthlink.netMICHIGANADVANCE AUTOMATEDSYSTEMS, INC. – PSparta, MI 49345Tel: (616) 887-0316E-mail: dale@advanceautomatedsystems.comWebsite: advanceautomatedsystems.comMINNESOTACOMBUSTION & CONTROLENGINEERING, INC. – L,PMaplewood, MN 55117Tel: (651) 488-5518E-mail: cce245@aol.comWebsite: www.combustionandcontroleng.comMISSOURIECC SUPPLY COMPANY – L,PSt. Louis, MO 63144Tel: (314) 645-2420E-mail: mkrziske@eccstl.comWebsite: www.eccstl.comNEW MEXICOPHOENIX INSTRUMENTATION, INC. – PAlbuquerque, NM 87107Tel: (480) 991-1440E-mail: EthanM@iwestco.comWebsite: www.iwestco.comNORTH CAROLINAW.K. HILE COMPANY, INC. – L,PMatthews, NC 28106-1015Tel: (704) 847-9125E-mail: sales@wkhile.comWebsite: www.wkhile.comOHIOFOX & DOLETECHNICAL SALES, INC. – L,PCleveland, OH 44146Tel: (440) 735-0100E-mail: sales@foxanddole.comWebsite: www.foxanddole.comW.T. BRYAN & ASSOCIATES, INC. – L,PCincinnati, OH 45231Tel: (513) 522-8532E-mail: alicekelsey@wtbryan.comWebsite: www.wtbryan.comPENNSYVANIAIVES EQUIPMENT CORP. – L,PKing of Prussia, PA 19406Tel: (610) 768-1600E-mail: msegal@mjsegalassoc.comWebsite: mjsegalassoc.comFOX & DOLE TECH. SALES, INC. – L,PBridgeville, PA 15017-0256Tel: (412) 257-0200E-mail: sales@foxanddole.comWebsite: www.foxanddole.comTENNESSEEP.O. DES MARAIS CO. – PNorris, TN 37828Tel: (865) 494-9368E-mail: phil@podtn.comWebsite: www.podtn.comTEXASJD INSTRUMENTS, INC. – L,PHouston, TX 77224-9463Tel: (713) 468-8087E-mail: sales@jdinstruments.comWebsite: www.jdinstruments.comUTAHMOUNTAIN STATES INSTRUMENTS – PSalt Lake City, UT 84120Tel: (801) 521-8045E-mail: EthanM@iwestco.comWebsite: www.iwestco.comWASHINGTONFIELD INSTRUMENTS & CONTROLS – PSpokane, WA 99218Tel: (509) 466-8226E-mail: jamie@fieldinst.comWebsite: www.fieldinst.comEXPORT DEALERSL = Laboratory P = ProcessALGERIA, MOROCCO, TUNISIAELCOMETER SA – LHermalle sous Argenteau, BelgiumTel: (32) 4/379-9610E-mail: be_info@elcometer.beWebsite: www.elcometer.beARGENTINABIO ANALÍTICA ARGENTINA S. A. – LBuenos Aires, ArgentinaTel: (54) 11/4515-0117E-mail: info@bioanalitica.com.arWebsite: www.bioanalitica.com.arpH. ELECTRONICA S.A. – PCapital Federal BS AS, ArgentinaTel: (54) 11/4331-0707E-mail: luftman@phelectronica.com.arWebsite: www.phelectronica.com.arAUSTRALIABIOLAB (AUST.) PTY LTD – LScoresby, VIC, AustraliaTel: (61) 1300/736767E-mail: industrial@biolab.com.auWebsite: www.biolab.com.auINDUSTRIAL TECHNOLOGIES(DIV. OF BIOLAB) - PBraeside, VIC, AustraliaTel: (61) 1300 SENSOR (736-767)E-mail: shaunn@aus.biolabgroup.comWebsite: www.davidson.com.auAUSTRIAINULA GmbH – L,PVienna, AustriaTel: (43) 1/405-6235E-mail: office@inula.atWebsite: www.inula.atBANGLADESHASHZAM ASSOCIATES – LDhaka, BangladeshTel: (880) 2/875-2434E-mail: ashzam.associates@yahoo.comBELGIUMANALIS N.V. – LGent, BelgiumTel: (32) 9/243-7710E-mail: phystest@analis.beWebsite: www.analis.comELSCOLAB NV – L, PKruibeke, BelgiumTel: (32) 3/250-1570E-mail: elscolab@elscolab.comWebsite: www.elscolab.comBRAZILALEM MAR COMERCIAL EINDUSTRIAL S.A. – LSão Paulo, SP, BrazilTel: (55) 11/3229-8344E-mail: alemmar@alemmar.com.br /comercial@alemmar.com.brWebsite: www.alemmar.com.brBRASEQ BRASILEIRA DEEQUIPAMENTOS LTDA. – L, PJarinu, SP, BrazilTel: (55) 11/4016-0000E-mail: brookfieldlab@braseq.com.brWebsite: www.braseq.com.brBULGARIA/MACEDONIAMARVEL LTD. – LPlovdiv, BulgariaTel: (359) 32/678026E-mail: sales@marvel.bgWebsite: www.marvel.bgCANADACAN-AM INSTRUMENTS LTD. – L,POakville, Ontario, CanadaTel: 905-829-0030E-mail: can-am@can-am.netWebsite: www.can-am.netCANADA - Alberta onlyJD INSTRUMENTS, INC. – PHouston, Texas 77224-9463Tel: (713) 468-8087E-mail: sales@jdinstruments.comWebsite: www.jdinstruments.comCANADA – Quebec & MaritimePROVAN CONTROLES – PSt. Laurent, Quebec, CanadaTel: (514) 332-3230E-mail: info@provan.caWebsite: www.provan.caCHILEARQUIMED S.A. – L,PSantiago, ChileTel: (56) 2/634-6266E-mail: arquimed@arquimed.clWebsite: www.arquimed.clCHINA (P.R.)CHE SCIENTIFIC CO. (HONG KONG) LTD. – LHong Kong, P.R. ChinaTel: (852) 2481-1323E-mail: sales@chescientific.comWebsite: www.chescientific.comCHELLESON SCIENTIFIC INSTRUMENTSCOMPANY - LHong Kong, P.R. ChinaTel: (852) 2413-6700E-mail: bonniekwong@chelleson.com.hkWebsite: www.chelleson.comPRECISA INTERNATIONAL (SHANGHAI)CO., LTD. - LShanghai, P.R. ChinaTel: (86) 021/6447-7888E-mail: info@precisa.cnWebsite: www.precisa.cnSHANGHAI RENHE SCIENTIFICINSTRUMENT CO., LTD. - LShanghai, P.R. ChinaTel: (86) 21-6485-0099E-mail: wendy@renhesci.comWebsite: www.renhe.net73

Brookfield DealersCHINA (P.R.)SHANGHAI YINKE TECHNOLOGYCO., LTD. - PShanghai, P.R. ChinaTel: (86) 21-6243-3309E-mail: warren_zhou@yinkepump.comWebsite: yinkepump.comSINOINSTRUMENT CO., LTD. - LGuangzhou, P.R. ChinaTel: (86) 020/8351-0088E-mail: dongnan@sinoinstrument.comWebsite: www.sinoinstrument.comSTOWELL COMPANY - PBeijing, P.R. ChinaTel: (86) 010-8773-0218E-mail: office@stowellchina.comWebsite: www.wjs-stowell.comSUN WILLOW TECHNOLOGYTRADING CO. LTD. - PGuangzhou, P.R. ChinaE-mail: sales@process-instrument.comWebsite: process-instrument.comTIANJIN DIAMOND INDUSTRY & TRADECO. LTD. - LTianjin, P.R. ChinaTel: (86) 022/2332-7102E-mail: tjdemeng@126.comWebsite: www.bf17.comCOLOMBIABIOLABOR S.A. – L,PBogota, ColombiaTel: (57) 1/262-7351E-mail: biolabor@biolabor.netWebsite: www.biolabor.netCOSTA RICAANALYTICAL INSTRUMENTS, S.A. – LSan Jose, Costa RicaTel: (506) 2272-4700E-mail: info@ai.co.crWebsite: www.ai.co.crCZECH REPUBLIC/UKRAINE/BELARUSSYNPO A.S. – L,PPardubice Czech RepublicTel: (420) 46/606-7293E-mail: instruments@synpo.czWebsite: www.synpo.czDENMARKBlumLab – PStubbekøbing, DenmarkTel: (45) 55/312009E-mail: info@blumlab.comWebsite: www.blumlab.comVWR/BIE & BERNTSEN – LHerlev, DenmarkTel: (45) 4386-8788E-Mail: info@dk.vwr.comWebsite: www.vwr.comEGYPTCTS CHEMICAL & TECHNICAL SERVICES – L,PCairo, EgyptTel: (20) 2/2378-2908 / 2378-4973E-mail: ctsegypt@ctsegypt.comwww.ctsegypt.comESTONIA/LATVIA/LITHUANIAG. W. BERG OÜ – LTallinn, EstoniaTel: (372) 6/505658E-mail: gwb@gwb.eeWebsite: www.gwb.eeFINLANDOY G.W. BERG & CO. AB – L, PVantaa, FinlandTel: (358) 201/255255E-mail: gwb@gwb.fiWebsite: www.gwb.fiFRANCEEQUIPEMENTS SCIENTIFIQUES – PGarches, FranceTel: (33) 1/479-59990E-mail: daniel.guez@es-france.comWebsite: www.es-france.comLABOMAT ESSOR – LSaint-Denis Cedex, FranceTel: (33) 1/4809-6611E-mail: info@labomat.comWebsite: www.labomat.comVWR INTERNATIONAL S.A.S. – LFontenay-sous-Bois, FranceTel: (33) 1/4514-8500E-mail: Support.technique@fr.vwr.comWebsite: www.fr.vwr.comGERMANYBROOKFIELD ENGINEERING LABS.VERTRIEBS GmbH – L,PLorch, GermanyTel: (49) 7172/927100E-mail: info@brookfield-gmbh.deWebsite: www.brookfield-gmbh.deVWR INTERNATIONAL GmbH – LDarmstadt, GermanyTel: (49) 06151/3972-152E-mail: brookfield@de.vwr.comWebsite: www.vwr.comGREECEALFA ANALYTICAL INSTRUMENTS. – LAthens, GreeceTel: (30) 210/957-3172E-mail: sales@instruments.grWebsite: www.instruments.grHONG KONGCHE SCIENTIFIC CO. (HONG KONG) LTD. – LKwai Chung, N.T. , Hong Kong, P.R. ChinaTel: (852) 2481-1323E-mail: sales@chescientific.comWebsite: www.chescientific.comHUNGARYSZIKKTI LABOR LTD. – L, PBudapest, HungaryTel: (36) 1/388-8752E-mail: szikktilaborkft@t-online.huWebsite: www.szikktilaborkft.huICELANDGROCO ehf – LReykjavik, IcelandTel: (354) 568-8533E-mail: bingo@groco.isWebsite: www.groco.isINDIAM/S. M. J. CORPORATION – LMumbai, IndiaTel: (91) 22/2578-5712E-mail: cabhay@bom3.vsnl.net.inWebsite: www.cabhay.co.inSUNJAY BIOTECH SOLUTIONS PVT. LTD. – L,PMumbai, IndiaTel: (91) 22/2417-1475E-mail: info@anmalliance.comWebsite: www.anmalliance.comINDONESIAPT. TRANSINDOTAMA SINAR PERKASA – L,PJakarta, IndonesiaTel: (62) 21/45840670E-mail: transindotama@transindotama.comWebsite: www.transindotama.comIRELANDFANNIN LTD – LDublin, IrelandTel: (353) 1/290-7000E-mail: info@fannin.ieWebsite: www.fannin.ieFULLBROOK SYSTEM LIMITED – PHerts, EnglandTel: (353) 1-442-876777E-mail: carlton@fullbrook.comWebsite: www.fullbrook.comISRAELAGENTEK (1987) LTD. – L, PTel-Aviv, IsraelTel: (972) 3/649-3111E-mail: sales2@agentek.co.ilWebsite: www.agentek.co.ilITALYGENERALCONTROL S.P.A. – PMilano, ItalyTel: (39) 02/3801-1111E-mail: vendita@generalcontrol.itWebsite: www.generalcontrol.itURAI SPA – LASSAGO (Milano), ItalyTel: (39) 02/892-3991E-mail: apparecchi@urai.itWebsite: www.urai.itJAPANJAPAN MACHINERY COMPANY – PChuo-Ku, Tokyo, JapanTel: (81) 3/3573-5421E-mail: jmctok@japanmachinery.comWebsite: www.japanmachinery.comNIPPON S.T. JOHNSONSALES CO., LTD. – LTokyo, JapanTel: (81) 3/5210-5211E-mail: kikaibu@njc-net.co.jpWebsite: www.njc-net.co.jpKOREAHWASHIN INSTRUMENT CO., LTD. – L,PSeoul, KoreaTel: (82) 2/3450-5605E-mail: mail@hwashin.netWebsite: www.hwashin.netMALAYSIAMECOMB MALAYSIA SDN. BHD. – LSelangor, MalaysiaTel: (60) 3/7874-3422E-mail: brookfield@simedarby.comWebsite: www.mecomb.comPRECISION CONTROL SDN BHD – PSelangor, MalaysiaTel: (60) 3-5191-8113E-mail: sales@precisioncontrol.com.myWebsite: www.precisioncontrol.com.myMEXICOEL CRISOL, S.A. DE C.V. – LMexico D.F., MexicoTel: (52) 55/5264-5500E-mail: crisol@elcrisol.com.mxWebsite: www.elcrisol.com.mxEQUIPAR, S.A. DE C.V. – LMexico, D.F., MexicoTel: (52) 55/5420-9901E-mail: equipar@equipar.com.mxWebsite: www.equipar.com.mxPROVEEDOR CIENTIFICO, S.A. – LMexico D.F., MexicoTel: (52) 55/5483-1050E-mail: procimex@proveedorcientifico.com.mxWebsite: www.proveedorcientifico.com.mxREACTIVOS Y EQUIPO, SA DE CV - LMonterrey, Nuevo Leon, MexicoTel: (52) 81/8333-6691E-Mail: rh@reactivosyequipos.com.mxWebsite: www.reactivosyequipos.com.mxMEXICO, ECUADOR, PANAMAGRUPO MAGNACOLOR, S.A. DE C.V. – PAtizapan, Edo. De MexicoTel: (52) 55/5308-09-41E-mail: info@grupomagnacolor.comWebsite: grupomagnacolor.comNETHERLANDSBENELUX SCIENTIFIC BV – LOchten, NetherlandsTel: (31) 344/655556E-mail: info@brookfield.nlWebsite: www.brookfield.nlELSCOLAB NETHERLANDS B.V – PUtrecht, NetherlandsTel: (31) 30/241-4200E-mail: main@elscolab.nlWebsite: www.elscolab.nlNEW ZEALANDBIOLAB LTD – L, PAuckland, New ZealandTel: 0800248222E-mail: industrialtech@biolab.co.nzWebsite: www.biolab.co.nzNORWAYNERLIENS MESZANSKY AS – L, POslo, NorwayTel: (47) 22/666500E-mail: info@nmas.noWebsite: www.nmas.noPAKISTANRAYS TECHNOLOGIES – LLahore, PakistanTel: (92) 42/637-1244, 637-4163E-mail: info@raystechno.comWebsite: www.raystechno.comPARAGUAYSIREX PARAGUAY – LMontevideo, UruguayTel: (598) 2/400-3854PERUARSA REPRESENTACIONES – LLima, PeruTel: (51) 1/4221167E-mail: ventas@arsarep.com.peWebsite: www.arsarep.com.pePHILIPPINESDAKILA TRADING CORPORATION – LMandaluyong City, PhilippinesTel: (63) 2/724-7511 to 16E-mail: sales@dakila.comWebsite: www.dakila.comGOLDEN BAT (FAR EAST) INC. – LQuezon City, PhilippinesTel: (63) 2/731-9745 to 46E-mail: gbat@pldtdsl.netWebsite: www.goldenbat.ph74 T: 800.628.8139 or 508.946.6200 F: 508.946.6262 www.brookfieldengineering.com

Brookfield DealersPOLANDLABO PLUS LTD. – L, PWarszawa, PolandTel: (48) 22/646-7727E-mail: laboplus@laboplus.plWebsite: www.laboplus.plPORTUGALSOQUÍMICA – LLisboa, PortugalTel: (351) 21/711 9300E-mail: soquimica@soquimica.ptWebsite: www.soquimica.ptPUERTO RICOPUERTO RICO PROCESSTECHNOLOGY, INC. – L,PFajardo, PRTel: (787) 801-4483E-mail: jgwt@coqui.netRUSSIAAVRORA LTD. – LMoscow, RussiaTel: (7) 495 258-8305/06/07E-mail: avrora@com2com.ruWebsite: www.viscometer.ruLAB DEPOT – LSt. Petersburg, RussiaTel: (7) 812 320-6048E-mail: info@labdepot.ruWebsite: www.labdepot.ruARGOSY TECHNOLOGIES LTD. – PMoscow, RussiaTel: (7) 095 510-6236E-mail: moscow@argosy-tech.ruWebsite: www.argosy-tech.ruSAUDI ARABIAK. I. ABDULKADIR &PARTNERS CO. LTD. – LJeddah, Saudi ArabiaTel: (966) 2/640-5846 Ext. 306E-mail: info@kiaksa.comWebsite: www.kiaksa.comAL-ABDULKARIM TRADING – PDammam Saudi ArabiaTel: (966) 3/833-7110E-mail: alkaram@akte.saudia1.comWebsite: www.akte.com.saSERBIA, MONTENEGROMEDIA ZEMUN DOO – L,PBeograd, SerbiaTel: (381) 11/261-4729E-mail: office@mediazemun.comWebsite: www.mediazemun.comSINGAPOREMECOMB SINGAPORE LIMITED – LSingaporeTel: (65) 6572-1200E-mail: mecomb@singnet.com.sgWebsite: www.mecomb.com.sgPRECISION CONTROL PTE. LTD. – PSingaporeTel: (65) 6285-3011E-mail: sales@pcsin.com.sgWebsite: www.precisioncontrol.com.sgSLOVAK REPUBLICECOTEST, S.R.O. – LTopolcany, Slovak RepublicTel: (421) 38/532-0171 / 2E-mail: ecotest@isternet.skWebsite: www.ecotest.skSLOVENIA/CROATIA/BOSNIA-HERZEGOVINALABSYS, LJUBLJANA, D.O.O. – L,PLjubljana, SloveniaTel: (386) 1/511-2559E-mail: labsys@labsys.siWebsite: www.labsys.siSOUTH AFRICAMONITORING & CONTROLLABORATORIES (PTY) LTD. – LJohannesburg, South AfricaTel: (27) 11/327-6524E-mail: sales@moncon.co.zaWebsite: www.moncon.co.zaWIRSAM SCIENTIFIC & PRECISIONEQUIPMENT (PTY) LTD. – PAuckland Park, South AfricaTel: (27) 11-482 1060/5E-mail: wirsamjb@wirsam.comWebsite: www.wirsam.comSPAINMAB INDUSTRIAL, S.A.U. – L,PBarcelona, SpainTel: (34) 93/430- 8301E-mail: mabindustrial@mab.esWebsite: www.mabindustrial.esSRI LANKAHEMSONS INTERNATIONAL (PTE) LTD – LColombo, Sri LankaTel: (94) 11/232-7948 / 232-3308E-mail: hemaslab@slt.lkWebsite: www.hemsons.lkSWEDENCHEMICAL INSTRUMENTS AB – LSollentuna, SwedenTel: (46) 8/5448-1260E-mail: info@ciab.seWebsite: www.ciab.seTEAMATOR AB – PHelsingborg, SwedenTel: (46) 42-250351E-mail: info@teamator.comWebsite: www.teamator.comSWITZERLANDHUNTER & CAPREZ AG – L,PZumikon, SwitzerlandTel: (41) 44/918-0808E-mail: mail@huntercaprez.comWebsite: www.huntercaprez.comTAIWANCHIN CHI TECHNOLOGY CO., LTD. – LHsinchuang Taipei Hsien, Taiwan, R.O.C.Tel: (886) 2/2299-7300E-mail: chinchi1@ms16.hinet.netWebsite: www.chinchi-tech.com.twTODAY’S INSTRUMENTS CO., LTD. – L,PLin-Kou Township, Taipei County, Taiwan, R.O.C.Tel: (886) 2/2603-2311E-mail: todays@todays.com.twWebsite: www.todays.com.twTHAILANDPRECISION CONTROL LTD. – PBangkok, ThailandTel: (66) 2/910-5280E-mail: sales@precisioncontrol.com.sgWebsite: www.precisioncontrol.com.sgSCIENTIFIC PROMOTION CO., LTD. – LPrakanong, Bangkok, ThailandTel: (66) 2/185-4333E-mail: marketing@spcgroup.co.thWebsite: www.spcgroup.co.thTURKEYARIF SALTUK LTD. STI. – L,PNisantasi Istanbul, TurkeyTel: (90) 212/233-9504E-mail: arifsaltuk@superonline.comWebsite: www.arifsaltuk.comSEM LAB. CHIHAZLARI PAZ. SAN ve TICLTD STI – LKozyatagi, Istanbul, TurkeyTel: (90) 216/571-0200E-mail: info@semlab.com.trWebsite: semlab.com.trUKRAINETEC ENGINEERING LTD. – LKiev, UkraineTel: (38) 44/496-2690E-mail: lab@tec.com.uaWebsite: www.tec.com.uaUNITED ARAB EMIRATES, OMAN,QATAR, BAHRAIN, KUWAIT, YEMENVENKTRON ELECTRONICS L.L.C. – L,PSharjah, United Arab EmiratesTel: (971) 6/532-9797E-mail: venk@emirates.net.aeWebsite: www.venktron.comUNITED KINGDOMBROOKFIELD VISCOMETERS LIMITED – LHarlow, Essex, EnglandTel: (44) 1279/451774E-mail: sales@brookfield.co.ukWebsite: www.brookfield.co.ukFULLBROOK SYSTEMS LIMITED – PHerts, EnglandTel: (44) 1-442-876777E-mail: sales@fullbrook.comWebsite: www.fullbrooksystems.co.ukURUGUAYLABIMED SA - LMontevideo, UruguayTel: (598) 2/903-2902E-mail: info@labimed.com.uyWebsite: www.labimed.com.uyVENEZUELADIDACTA, C.A. – LCaracas, VenezuelaTel: (58) 212/278-5811E-mail: cotizaciones@didacta.com.veWebsite: www.didacta.com.veVIETNAMVIETCO SCIENTIFIC & TECHNICAL EQUIP-MENT CO. LTD. – LHochiminh City, VietnamTel: (84) 8-8611388E-mail: vietco@saigonnet.vnRONG TIEN CO., LTD – L,PHochiminh City, VietnamTel: (84) 8/845-7084E-mail: rongtienvn@hcm.vnn.vnWebsite: www.rongtien.comBrookfieldRegional OfficesBrookfield ViscometersLimitedBrookfield Technical Centre1 Stadium WayHarlow, Essex CM19 5GX, EnglandTel: 1279/451774Fax: 1279/451775E-mail: sales@brookfield.co.ukWebsite: www.brookfield.co.ukBrookfield Engineering Labs.Vertriebs GmbHHauptstrasse 18D-73547 Lorch, GermanyTel: 7172/927100Fax: 7172/927105E-mail: info@brookfield-gmbh.deWebsite: www.brookfield-gmbh.deBrookfield EngineeringLaboratories, Inc.Midwest Regional Office8 North Maple StreetMt. Prospect, IL 60056 USATel: (847) 368-8472E-mail: d_larson@brookfieldengineering.comWebsite: www.belusa.comGuangzhou BrookfieldViscometers and TextureInstruments Service Co. Ltd.Room 5C, Tianxing Building East Tower,No. 21, Zhongshan Yi Road,Guangzhou, 510600, P.R.ChinaTel: (86) 20/3760-0995; -8953Fax: (86) 20/3760-0548; -8953E-mail: marketing@brookfield.com.cnWebsite: www.brookfield.com.cnRheoTecMesstechnik GmbHa division of Brookfield EngineeringSchutterwälder Straße 23D-01458 Ottendorf-OkrillaTel: 03 52 05/59 67-0Fax: 03 52 05/59 67-30E-mail: info@rheotec.deWebsite: www.rheotec.de75

DV-II ProViscometer(p6)CT3TextureAnalyzer(p50)AST-100In-lineViscometer(p60)Brookfield Engineering Laboratories, Inc.11 Commerce Boulevard, Middleboro, MA 02346-1031 USAT: 800.628.8139 or 508.946.6200 F: 508.946.6262W: www.brookfieldengineering.com