Facade - Semcoglas

KLIMA CLIMATE GLAZING04SEMCO KLIMA / SEMCO KLIMASTARMore than just solar protectionThe requirements set by modern architecture for large glass surfaces that are fully transparentand neutrally coated are met by Semcoglas with their premium glazings SEMCO KLIMA andSEMCO KLIMASTAR. These Klima climate glazing products were originally developed for use infacades with a glass coverage of more than 50 percent in order to optimally meet the applicablerequirements for summer thermal insulation.SEMCO KLIMA 500 _ Office building, MünsterSEMCO KLIMA 600 _ Central Canteen, BersenbrückMATCHING SEMCO COLOR FACADEPANELS AVAILABLE [ s. P. 22 ]

05SEMCO KLIMA 500 _ Timber Harbor West, HamburgOptimal summerthermal insulationSummer thermal insulation is optimally ensured withthe particularly low g values of Semco Klima glazing -the light comes in, but solar energy and the correspondingheat remains outside. Energy-intensive operation of airconditioners during hot summer months is a thing ofthe past. Our Klima climate glazing is therefore particularlysuitable for facades with a glass proportion of morethan 50 percent.Klima climate glazingSolar energyReflectionReflectionReflectionCoating positionTotal energytransmittance(g value)Secondary heat output through absorptionSEMCO KLIMA permits significantly lesssolar energy transmittance than conventionalthermal insulation glazing.A considerable proportion of the solarenergy falling on the glazing is alreadyreflected away by the outer pane.The rest of the pane construction reflectsso much of the remaining energy thatjust 19 to 37 percent is allowed to passthrough the panes.In the colder seasons, the low Ug value of SEMCOKLIMA and SEMCO KLIMASTAR provides a comfortableroom climate. Long-wave heat radiation is reflectedback into the room.SEMCO KLIMA 700, 600, 500 / OPTIMALLY SUITABLE FOR:•Private, commercial and public buildings such as schools,office buildings, hotels, etc.•Buildings with a glazing proportion of over 50 percentTechnical data on Page 32

06KLIMA CLIMATE GLAZINGSEMCO KLIMA / SEMCO KLIMASTARBE CONVINCED BYTHE COLOR NEUTRALTRANSPARENCYIn comparison to conventional solarprotection glazing, SEMCO KLIMA givesyou a completely clear and faultless viewof objects.SEMCO KLIMA 400SEMCO KLIMA 500SEMCO KLIMA 600SEMCO KLIMA 700 _ Community Center Schloss UeckermündeSEMCO KLIMA 700SEMCO KLIMA GLAZING SCORES HEREFOR MORE TRANSPARENCY Large glass surfaces, color neutrality and glazing uniformity, low color fluctuation,AND LIVING COMFORT bright rooms and optimal living and working climateFOR THE ENVIRONMENTFOR UV PROTECTIONFOR LESS COSTSReduced energy costs with no air conditioning, reduction in artificial lighting and reduced CO2 emissionsGreater UV protection for furniture, plants and wood surfacesLower heating costs through low Ug value of 1.0 and below

FOCAL POINT GLASS STRUCTURES07Light-flooded glass structures should provide a comfortable place to stay both in commercial and private buildings.However, temperatures can develop in transitional and summer months that can make a longer presence in such places unbearable.In addition, textiles and wood surfaces are pitilessly exposed to solar UV radiation and even plants are unprotected from burninglens effects.Living under glass becomes a relaxing event, even in high summer, with the climate glazing SEMCO KLIMA and SEMCO KLIMASTAR.Our Klima climate glazing is also equipped with high UV protection so that the plants and interior decorations remain unaffected.Interior temperature curve in a glass structure without the influence of thermal conditions (Ø monthly values)403530Thermal insulation glazingSEMCO STARSEMCO KLIMA 400 (roof)SEMCO KLIMA 700 (facade)Temperature in °C25201510Germany averageexternal temperature50-5Span of externaltemperatureThermal insulation glazing SEMCO STARSource: Calculation results Krämer-Evers Bauphysik, OsnabrückSEMCO KLIMA 400 (roof)Germany average external temperatureSEMCO KLIMA 700 (facade)Conservatory with penthouse roof, south-west alignment without thermal conditions; high air exchange rateGlass types: SEMCO STAR (Ug=1.1; g= 62 %), SEMCO KLIMA 400 (Ug=1.0; g= 21 %) + SEMCO KLIMA 700 (Ug=1.0; g= 37 %)SEMCO KLIMA 400 _ CFK Research Center, StadeSEMCO KLIMA 400 / OPTIMALLY SUITABLE FOR:•Commercial and private buildings with glass structures,conservatories, overhead glazing, atriums, etc.Technical data on Page 32

THERMAL INSULATION GLAZING08SEMCO STAR / SEMCO ENERGYThermal insulation equivalentto a wallWherever summer thermal insulation does not play a role in facades with a relatively low glasspercentage of under 50 percent, the thermal insulation glazing SEMCO STAR and SEMCO ENERGYprovide an excellent and comfortable room climate.Both product groups meet the requirements of the Energy Savings Act. They can be used in lowenergyand passive houses as they permit a lot of energy into the building but not back out again.Are you planning a facade with a glass percentage over 50 percent? Then SEMCO KLIMA or SEMCOKLIMASTAR are the perfect products for you [cf. P. 04].Ug VALUE:THE SMALLER, THE BETTERHeat transfer(Ug value)ReflectionLong-waveheat radiationoutsideinsideThe Ug value indicates how much heat in a roomis transmitted to the outside through glass witha surface of 1 square meter and a temperaturedifference of 1 Kelvin.The EnEV 2009 requires Ug values of 1.1 W/m²K forglass (new building reference value).This value is undershot by SEMCO KLIMASTAR withUg values of up to 0.4 W/m²K, setting new yardsticksin climate protection and energy savings.SEMCO STAR _ Felix Nussbaum Museum, OsnabrückThis keeps the cold outThe thermal energy of solar radiation is optimally utilized and, thanks to a low Ug value, thewarmth remains in the building. Results are achieved that are comparable to the use of solid wallbuilding materials. Unpleasant drafts are a thing of the past as the pane surface does not radiatethe cold. So, high comfort is guaranteed, even directly next to a window.ALL THERMAL INSULATION GLAZINGALSO AVAILABLE WITH THERMALLYINSULATED PLASTIC MULLIONS!Our triple glazing SEMCO ENERGY is also available with g values of over 60 percent.Ask your consultant.

09SEMCO STAR _ H10 Hotel, BerlinCoating positionNoble gas fillingThermally separatedspacersOutsideInsidePane structure SEMCO STAR (double) and SEMCO ENERGY (triple)OPTIMALLY SUITABLE FOR:•Private and commercial buildings with punctuatedfacades and low glass percentage•Buildings with a glazing proportion of less than 50 percent•Low-energy or passive building designsSEMCO STAR and SEMCO COLOR _ Administration offices, HamburgTechnical data on Page 32

SOLAR PROTECTION GLASS10SEMCO SUN / SEMCO SUN REFLECTCreative reflectionsBuildings get an unmistakably animated profile with the solar protection glazing SEMCO SUN and SEMCO SUN REFLECT. Depending on thearchitectural visual requirements, the choice lies between neutral, blue, bronze, green, silver or gray reflective glass. An individually elegant,aesthetically colored and reflective facade can be achieved through different color gradations of the tinted glazing and different reflectionstrengths.Brilliant and modern surfaces are shown by SEMCO SUN and SEMCO SUN REFLECT, for example, when used in STRUCTURAL GLAZING facadeswhere they can meet the requirements of modern architecture for almost completely seamless glass facades [cf. P. 19].The facade is not just visually brilliant: The excellentthermal insulation with a Ug value of 1.0 W/m²K alsomeets the highest of requirements.Incidentally: If you are planning a facade with a glazingproportion exceeding 50 percent and you also want afully neutral view through the glass, then SEMCO KLIMAor SEMCO KLIMASTAR are the ideal products [cf. P. 04].SEMCO SUN 550/1 and SEMCO COLOR _ Berlin Hyp Bank, BerlinSEMCO SUN 340/1 und SEMCO COLOR _ Mercedes-Benz Car Dealership, Oldenburg

11SEMCO SUN 340/1 and SEMCO COLOR _ Germaniahafen, KielMATCHING SEMCO COLORFACADE PANELS AVAILABLE [ s. P. 22 ]OPTIMALLY SUITABLE FOR:•Mainly commercial properties•Reflective or color-reflective facades•For use in STRUCTURAL GLAZING facadesTechnical data on Page 33

SOUND INSULATION GLAZING12SEMCO PHONENo chance for noiseStreet noise, loud operating noise or the noise from aircraft: Noise pollution through our environment hasincreased greatly in the past.Semcoglas provides silence. The noise stays on the outside with tested sound insulation glazing. SEMCO PHONEoffers the appropriate glazing for various noise sources – whether for buildings on heavy traffic routes or in theneighborhood of discos and airports. Semcoglas can resolve small and large noise problems with a wide range ofsound insulation glazing. Securely and effectively.SEMCO PHONE can, of course, also be combined with the appropriate climate, thermal insulation, solar protectionand safety glass. For complete protection at all times inside a building.

15Fall protection glazingSEMCO SAFE offers integrated protection against cuts with the shard-binding property of the composite film and also providesremaining structural capacity in the case of glass breakage. It is also suitable for fall protection in the correct glass applicationsaccording to TRAV (technical rules for the use of safety glazing). These rules are issued by the German Institute for ConstructionEngineering (DIBt) and taken into consideration in all Federal states by the supervising building authorities.Semcoglas has a „General building inspection test certificate“ (AbP) for safety insulation glazing (double and triple) in the TRAVcategories A, C2 and C3.The minimum configuration is CSG8-0.76 / PIS10 / CSG6-0.38. This can be expanded by a middle pane for triple glazing configurations.It can be produced with safety glass or even float glass. If glazing is produced according to the AbP, then the impact resistance isproven according to TRAV. This avoids the necessity of experimental tests or approvals in individual cases!Numerous easy optionsThe individual glass panes in the composite safety glass SEMCO SAFE SENTRYGLAS ® are bonded together with SentryGlas ® intermediatefilm layers. A wide-ranging field of applications is made possible by the resulting high stiffness.Larger dimensions and less weight are just two of the advantages that this product offers in comparison to composite safety glassusing PVB film as an intermediate layer. SEMCO SAFE SENTRYGLAS ® opens up new architectural possibilities for architects andconstruction engineers.OPTIMALLY SUITABLE FOR:•Protection of valuable objects•Fall protection safety glazing(e.g. balcony balustrades, railings)•Protection of and against personsTechnical data on Page 34

ALARM GLAZING16SEMCO DUR ALARMSecurely monitoredAccording to crime statistics, half of all break-ins are carried out via unsecured glazing areas.Semcoglas sounds the alarm: Excellent protection for buildings with SEMCO DUR ALARM, whether in the private, commercialor public sector.Burglars simply stand no chance when buildings are equipped with safety glass and integrated alarm function. The alarmstrip is either positioned invisibly or discreetly visible - as a preventative deterrent. As soon as the glass is damaged, the alarmis triggered. SEMCO DUR ALARM reacts within seconds – driving the burglars away.SEMCO DUR ALARM with discreetly positionedalarm strip (top) and completely hidden alarmstrip (bottom)SEMCO DUR ALARM and SEMCO KLIMA 700 _ C & A premises, OsnabrückSemcoglas offers safety with quality, which pays in emergency situations: SEMCO DUR ALARM meets all legal VdS andDIN specifications for burglar alarm systems Class C. You are also on the safe side with SEMCO DUR ALARM with regardsto damage regulation in insurance cases.The system can be combined with all commercial alarm systems and other functions such as thermal insulation, solarprotection, sound protection and climate glazing.OPTIMALLY SUITABLE FOR:•Protecting commercial and private properties frombreak-in•Shop windows

PRIVACY PROTECTION GLASSSEMCO KLIMA LIGHT DIFFUSION17Not for dazzlersSEMCO KLIMA LIGHT DIFFUSION (LD) brings light into industrial buildings and sports halls: The light diffusing characteristic of the glassprevents direct dazzling and also guarantees visual protection. It also meets the requirements for listed buildings and has been tested asball-impact resistant for use in sports halls.In comparison to conventional hall glazing systems, the thermal insulation is significantly higher with Ug values of up to 1.0 W/m²K (doubleglazing) and 0.5 W/m²K (triple glazing). SEMCO KLIMA LD also keeps the heat out in summer, thus providing comfortable temperatures.A glass full of good properties.SEMCO KLIMA LD _ Sports hall, WesenbergOPTIMALLY SUITABLE FOR:•Halls for commercial or public use and visualprotection requirements•Sports halls•Listed buildings

FULLY GLAZED FACADES18SEMCO STRUCTURAL GLAZINGSEMCO STRUCTURAL GLAZING and FINI CURVE _ Abford House, LondonFacelifts for facadesGlazing options with STRUCTURAL GLAZINGCrystal clear aesthetics across the board offered by SEMCOSTRUCTURAL GLAZING. Is it new or old? The viewer can onlyguess where windows are placed with functional glazing andwhere wall elements are used with SEMCO COLOR.‚STRUCTURAL GLAZING‘ was developed over 25 years ago in theUSA. With its filigree, flush-mounted appearance, this structuralconfiguration is preferentially used in representative entrances,stairwells and facades of office buildings. In addition, the lack oftransverse and longitudinal profiles means that such facades areextremely easy to clean.All Semcoglas functional glazing can be combined with amatching facade panel so that we, as a certified STRUCTURALGLAZING partner, can guarantee a facelift that can show its faceanywhere.Flush-mounted dry glazing inhorizontal sectionWet sealing in horizontalsectionFlush-mounted dry glazingin vertical sectionU-shaped dry glazing invertical sectionOPTIMALLY SUITABLE FOR:•Visually frameless glass facades•Facade claddingMATCHING SEMCO COLORFACADE PANELS AVAILABLE [ s. P. 22 ]

POINT-FIXED GLAZINGSEMCO POINT19Perfect and to the pointFloating facades and transparent lightness of design:The advantages of clear glass facades are clearly pointed out with SEMCOPOINT. Thanks to this excellent system, large surface areas can be realizedwithout frames. The fittings are flush-integrated in the panes with countersunkholes or combined with disc holders through cylindrical glass bores. Themain point here is that: The point-fixed system is equipped with an articulatedholder whose rotation point lies within the glass plane.SEMCO POINT is so simply relaxed: Forces that occur are directly divertedinto the sub-structure. The intrinsic weight of the glass pane does nottherefore cause any additional stresses in the holding area. The thicknessof the glass can be reduced to a minimum. SEMCO POINT makes brilliantfacade design possible through perfect technology.We also even offer a system with optimal grip for canopy systems and fullglazing systems such as glazed passages, waiting rooms or public transportstops.SEMCO POINT _ Cruise Center, Warnemünde (top/bottom)SEMCO POINT _ Municipal museum, DemminDisc holderCountersunk holderOPTIMALLY SUITABLE FOR:•Large area glazing, overhead glazing•Canopy systems•Fully glazed systems such as e.g. glazed passages,waiting rooms and public transport stops

SCREEN PRINTING20SEMCO DESIGNFantasy glass designGlass surfaces take on clearly unique appearances with SEMCO DESIGN.Graphic patterns, company logos or text - we ensure that your individual taste is reflected onthe surface of the glass.SEMCO DESIGN is just as suitable for the design of facades, balustrades, canopies and roofingas it is for public transport stops, porches or signs.The process is perfectly easy: The design is applied with ceramic colors to the glass usingscreen printing and burnt on during the tempering process. The product is water and scratchresistant,ensuring long durability. There are no limits to the choice of color. The entire colorspectrum is available, based on the RAL, RAL Design, NCS, Pantone and Sikkens systems. Thetempered SEMCO DESIGN is always subject to a Heat-Soak test (SGS-H), if used in facades, tominimize the risk of spontaneous breakage due to nickel-sulfide inclusions.SEMCO DESIGN _ Car park, Rostock (top/right)

21SEMCO DESIGN and SEMCO KLIMA 600 _ Cruise Center Altona, Hamburg (top/bottom)SEMCO DESIGN _ Logo design on office buildingYOU CAN FIND NUMEROUS POPULAR DESIGNTEMPLATES IN OUR PATTERN BOOKCustom patterns are displayed perfectly on clear or colored floatglass and white glass.SEMCO DESIGN can be combined as a mono or insulation glasswith our climate, thermal insulation and sound insulation glazingand with safety functions. Fantastic glazing with extra functionality- for extra safety and comfort.OPTIMALLY SUITABLE FOR:•Color designs with transparency•Depiction of Corporate Design elements such as e.g.company logos•Signs, orientation systems•Visual protection

FACADE PANELS22SEMCO COLORSEMCO COLOR _ Marienkrankenhaus hospital, HamburgSEMCO COLOR _ River police headquarters, RostockColorful interactions onfacadesFantastic effects can be achieved with colors. Facades shine in unique animatedappearances with SEMCO COLOR. A broad color range can be selected for thefacade panels, depending on the architectural requirements, colors that are ofcourse available for all our glass types. The colors can also be optimally matchedto other materials using the RAL, RAL Design, NCS, Pantone and Sikkens systems.The advantages of SEMCO COLOR can be seen: The facades are eye-catchingwith permanently burnt-in special colors on the outside, but opaque to theinterior. SEMCO COLOR on white glass has a particular brilliance.The mixture does it with SEMCO COLOR. The use of special glass types results inboth unusual mixed color effects and homogenous glass facades in combinationwith SEMCO SUN or SEMCO SUN REFLECT [cf. P. 10].The tempered Semcoglas single glazing safety glass meets all relevant constructionapproval requirements. We only use enamel colors free from heavy metals inour standard color range, in accordance with our concept of ecologicallycompatibleconstruction materials.SEMCO COLOR is always subject to a Heat-Soak test (SGS-H), if used in facades,to minimize the risk of spontaneous breakage due to nickel-sulfide inclusions.

Application examples for connecting panelsoutside inside outside inside outside inside outside inside23Mineral insulation materialRock wool WLG 035AL plate with Z-edgingColor as requiredAL plateColor as requiredPUR rigid foamWLG 035AL plateColor as requiredVacuum insulationPIS filled with noble gasSGS facade panel, RAL orNCS with HS testSGS facade panel, RALor NCS with HS testSGS facade panel, RALor NCS with HS testSGS facade panel, RALor NCS with HS testSGS with thermal insulationGlass-aluminum composite panelwith Z-edging for wall and balustradecladding with good thermal and soundinsulation propertiesGlass sandwich panel is a thermalinsulation panel with low mountingdepth for use in the facade sectorVacuum insulation panel with lowmounting depth for use in facade sectorsthat do not permit use of conventionalcanted panelsGlass-glass panel with insulation glazingappearance and excellent depth effect forpost-beam construction in an all-glass lookTHE COMPREHENSIVE COLORRANGE CAN BE FOUND IN OURCOLOR CATALOGSSEMCO COLOR and SEMCO COLOR VANCEVA _ Employment Agency, BerlinSEMCO COLOR _ UTA Headquarters, AschaffenburgOPTIMALLY SUITABLE FOR:•Creative color solutions•Homogeneous glass facades in combination with otherfunctional glazing in our product range

COLOR FILMS24SEMCO COLOR VANCEVAOver a thousand color nuancesavailable at the click of a buttonColorful aspects and perspectivesSEMCO COLOR VANCEVA brings color into our lives: Blue glass roofs make the viewer think of a permanentlyblue sky, green tinted windows turn the vision of a green paradise behind glass into reality. SEMCO COLORVANCEVA creates harmony in color and design.Wonderful perspectives are possible thanks to the novel color film generation. Over a thousand design variantscan thus be realized on high-quality composite safety glass (CSG), up to 2440 x 4500mm. The palette rangesfrom standard colors to personally created tones. Various levels of light permeability can also be achieved withthree different white films.SEMCO COLOR VANCEVA _Wandsbek Market, HamburgSEMCO COLOR VANCEVA makes exciting architecture worth looking at – also with regards to facade designsusing company colors. If your clients love extravagant glass design, then this is the product for them.SEMCO COLOR VANCEVA _ Shopping Center, GreifswaldSEMCO COLOR VANCEVA _ Campus, MarburgOPTIMALLY SUITABLE FOR:•Partially transparent glazing with color effects, e.g.balconies, railings, etc.•Transparent building design in company colorsSEMCO COLOR VANCEVA _ Einkaufszentrum, Greifswald

MOTIF FACADESSEMCO PICTURE25Gigantic imagesFacades are displayed in an entirely new light with customized images.Creativeness without limit. With the free selection of images, SEMCOPICTURE is extremely versatile and fascinating in topic-based architecturewith individually designed glass surfaces.The glass surfaces can be displayed transparently or opaque with theselected image according to the application area. SEMCO PICTURE is alsoexemplary when it comes to production: The absolutely UV-resistant PVBfilm holding the image is protected by being laminated within the panestructure of the composite safety glazing.SEMCO PICTURE _ Office buildingSEMCO PICTURE _ Office buildingOPTIMALLY SUITABLE FOR:•Creative decorative elements on glass•Company photos / Illustrations within the frameworkof Corporate Design

CURVED FACADE GLAZING26FINI CURVEGlass with verveGlazing goes round the bend with FINI CURVE: Curves shapes setnew trends in facade design. Cylindrical, spherical or conical curves -the object in question will have an unusual and amazing aspect.Through the innovative engineering of FINI CURVE, special shapescan be realized with verve. The facade will become an aestheticeye-catcher in interaction with colored glazing.We can, of course, also shape solar protection and thermal insulationglazing.FINI CURVE _ Lehrter Railway Station, BerlinFlexible glazingBending capacity SGS CSGInsulatingglazingClear float glass ü ü üExtra-white glass ü ü üSatin-finished glass ü ü üColored glass ü ü üAnti-reflective glass ü ü üScreen-printed glass ü ü üOrnamental glass - ü üSolar protection glass ü ü üThermal insulation glazing ü ü üFINI CURVE _ Ramada Hotel, Berlin

FINI CURVE FLOAT AND FINI CURVE CSG HAVETHE FIRST GENERAL CONSTRUCTION APPROVALFOR CURVED GLASS (Z-70.4-146)27FINI CURVE _ Abford House, LondonPrinciples of dimension terminologyOuter chord SInner chordBending angleGlass thicknessPane height outside ShOuter radiusBending axisInner curve (concave side)Outer curve (convex side)Pane height HFINI CURVE _ Rabobank, UtrechtOuter girth LFurther information on curved glazing can be foundunder www.finiglas.deOPTIMALLY SUITABLE FOR:•Curved facades•Balustrades•Circular structure glazing

28 QUALITY FROM SEMCOGLASFLOAT GLASSThe production of float glass in our float glass plant inOsterweddingen is a long, constant, never-ending flow.Only the highest of precision throughout the entire productionline can guarantee the high quality of our float glass. Ourplant can be rightly said to be one of the most modern glassworksin the world.COATINGCoatings, e.g. with silver and metal dioxide, can specificallyinfluence the properties of glass. These materials have a hightransmissivity in the visible spectral range and a highreflectivity in the infrared range. In addition, metal oxideswith a high refractive index are applied for antireflection.

29BLANKThe material glass requires a lot of know-how, secure handlingand state of the art technology. Our experienced specialistsensure perfect results are achieved for blanks, rounded andcanted edges, cut-outs and model panes with the use of stateof the art CNC technology. A comprehensive stock of float andcast glass, together with design and special glazing, ensuresrapid processing of orders.We can meet diverse requirements with precisely dimensionedblanks and process these into high-quality glass products.SPACERHollow profiles made of aluminum, stainless steel, plastic or TPS(Thermo Plastic Spacer) are used as spacers.The two panes in insulation glazing can be held at the requireddistance in this manner.Desiccant is stored in the metal spacers. TPS in contrast does notneed additional desiccant; such a warm edge system enables amore uniform temperature distribution over the glass surface andensures that energy losses are minimized along the edge areas ofinsulation glazing.SEALINGIn the last step, the individual glass panes joined by a spacerare initially sealed circumferentially with Butyl (primary seal).The term Butyl stands for a specific butyl rubber recipe that isproduced through the polymerization of polyisobutyls (PIB).Following this butyling, the insulation glazing panes are sealed(secondary sealing) with a sealant, generally based on polyurethaneor polysulfide. Some of the main properties of Butylare the very high gas and water vapor impermeability, whilethe sealing material is primarily used to secure the stability ofthe insulation glazing pane and hold the Butyl cord in place, inaddition to its sealing function. The standard edge connectorheight is approx. 11 mm.

30QUALITY AND APPROVAL MARKSThe careful selection of high quality preliminary products, the use of environmentally-friendly materials and modern technology, theconstant qualification of the employees and systematic in-house and third-party monitoring from production to delivery all ensureuniform quality of Semcoglas functional glazing for windows and facades.High quality standards are a prerequisite for high customer satisfaction! The following quality and approval marks are evidence ofSemcoglas quality:CE certificationSemcoglas verifies conformity of its produced multi-pane insulation glazing and safety glazing with the requirements ofthe European product standards. The respective initial type tests required for this purpose and the compulsory factoryproduction control (FPC) are implemented in all production factories. In order to guarantee our customers a high qualitystandard over and above this, the FPC and the relevant standard product tests in the individual insulating and safetyglazing works are subject to voluntary third-party monitoring by an independent test authority approved at Europeanlevel, for example:Information about the CE marking of our standard products can be found on the Internet under www.semcoglas.com/ce.All relevant performance features are listed there in tabular form, sorted according to the respective product. We candraw up a CE declaration of conformity for you on request for special insulation glazing and safety glass configurations.Ü mark (German mark of conformity) - legal requirementSemcoglas declares with this mark that its products also conform to the legal national requirements for insulation andsafety glazing, in addition to the CE mark.

31DIN EN ISO 9001 – Systematic qualityThis mark documents that Semcoglas is monitored according to the guidelines of the quality management system set out in ISO9001:2008. A continuous improvement process (CIP) is implemented on this basis, with the aim of optimizing working sequencesin all operational divisions and maintaining uniformly high quality of products.RAL - a valued quality markThe RAL quality mark identifies those products and services that are produced according to high specified quality criteria. Thequality and approval specifications of the Gütegemeinschaft Mehrscheiben-Isolierglas (GMI - Association for thermal insulationglass producers) are met by Semcoglas. These include primarily a tolerance for the Ug value ≤ 0.1 W/m²K and the emissivity of thecoatings of ≤ 0.01. In addition, independent third-party monitoring of production is implemented.„No RAL-tested window without RAL-tested insulation glazing!“KOMO – certified quality on siteThe KOMO mark is a guarantee for an above-average insulation glazing standard in the Netherlands. The latest quality requirementsof the Dutch foundation „Building quality“ and legal specifications are thereby met. They include regular product testing andthird-party monitoring by the KIWA Product Cert GmbH.DS - CertificeretSemcoglas is certified and monitored in compliance with the Danish Standard (DS) with this approval mark. Product tests areimplemented and ongoing production monitored by an external body.SP - Sveriges Provnings- och ForskningsinstitutThe P mark signals Scandinavian customers that Semcoglas is also subject to constant monitoring within the framework of theSP certification. This includes strict product tests and third-party monitoring by the Swedish testing and research institute (SP).Benor - CertificatSemcoglas is certified with this approval mark in compliance with the Belgian standard requirements by the BCCA (BelgianConstruction Certification Association). Product tests and two third-party monitoring production inspections per year areimplemented.VdS - certificateGlazing with alarm systems and the relevant production factories are certified and monitored by the VdS Schadenverhütung GmbH. Thecorresponding requirements regarding production of the alarmed glazing - whether insulation or safety glazing - are met here by Semcoglas.

32 SPECIFICATIONSGlass productGlass thicknessGlass structureoutside/PIS/inside(outside/PIS/center/PIS/inside)Gas typeWeightU g -valueDIN EN 673(ΔT=15K)g valueDIN EN 410Light transmissivity(D65) t vLight reflectionoutside (D65) r vColor reproductionindex Rab factor(shading coefficient)mm mm kg/m 2 W/m²K % % % %Klima climate glazingSemco Klima 400 26 6*/16/4 Ar 25 1,0 21 40 25 91 0,26Semco Klima 400 28 8*/16/4 Ar 30 1,0 21 40 25 90 0,26Semco Klima 400 30 8*/16/6 Ar 35 1,0 21 39 25 90 0,26Semco Klimastar 400 38 6*/12/4/12/*4 Ar 35 0,7 19 35 26 90 0,24Semco Klimastar 400 42 6*/14/4/14/*4 Ar 35 0,6 19 35 26 90 0,24Semco Klimastar 400 Kr 38 6*/12/4/12/*4 Kr 35 0,5 19 35 26 90 0,24Standard recommendation color-matched Semco COLOR facade panel: Type SC 8372 ESemco Klima 500 26 6*/16/4 Ar 25 1,0 26 51 19 91 0,33Semco Klima 500 28 8*/16/4 Ar 30 1,0 26 50 19 90 0,33Semco Klima 500 30 8*/16/6 Ar 35 1,0 26 50 19 90 0,33Semco Klimastar 500 38 6*/12/4/12/*4 Ar 35 0,7 24 45 20 90 0,30Semco Klimastar 500 42 6*/14/4/14/*4 Ar 35 0,6 24 45 20 90 0,30Semco Klimastar 500 Kr 38 6*/12/4/12/*4 Kr 35 0,5 24 45 20 90 0,30Standard recommendation color-matched Semco COLOR facade panel: Type SC 8372 ESemco Klima 600 26 6*/16/4 Ar 25 1,0 32 64 18 93 0,40Semco Klima 600 28 8*/16/4 Ar 30 1,0 32 63 18 92 0,40Semco Klima 600 30 8*/16/6 Ar 35 1,0 32 63 18 92 0,40Semco Klimastar 600 38 6*/12/4/12/*4 Ar 35 0,7 29 56 20 92 0,36Semco Klimastar 600 42 6*/14/4/14/*4 Ar 35 0,6 29 56 20 92 0,36Semco Klimastar 600 Kr 38 6*/12/4/12/*4 Kr 35 0,5 29 56 20 92 0,36Standard recommendation color-matched Semco COLOR facade panel: Type SC 8687 ESemco Klima 700 26 6*/16/4 Ar 25 1,0 37 68 13 96 0,46Semco Klima 700 28 8*/16/4 Ar 30 1,0 37 67 13 96 0,46Semco Klima 700 30 8*/16/6 Ar 35 1,0 37 67 13 95 0,46Semco Klimastar 700 38 6*/12/4/12/*4 Ar 35 0,7 34 60 16 95 0,43Semco Klimastar 700 42 6*/14/4/14/*4 Ar 35 0,6 34 60 16 95 0,43Semco Klimastar 700 Kr 38 6*/12/4/12/*4 Kr 35 0,5 34 60 16 95 0,43Standard recommendation color-matched Semco COLOR facade panel: Type SC 9207 EThermal insulation glazingSemco Star 24 4/16/*4 Ar 20 1,1 63 79 13 98 0,79Semco Star Kr 16 4/8/*4 Kr 20 1,2 63 79 13 98 0,79Semco Star Kr 18 4/10/*4 Kr 20 1,0 63 79 13 98 0,79Semco Star Kr 20 4/12/*4 Kr 20 1,1 63 79 13 98 0,79Semco Energy 28 4*/8/4/8/*4 Ar 30 1,0 50 70 17 97 0,63Semco Energy 32 4*/10/4/10/*4 Ar 30 0,8 50 70 17 97 0,63Semco Energy 36 4*/12/4/12/*4 Ar 30 0,7 50 70 17 97 0,63Semco Energy 36 4/12/*4/12/*4 Ar 30 0,7 53 70 16 97 0,66Semco Energy 40 4*/14/4/14/*4 Ar 30 0,6 50 70 17 97 0,63Semco Energy 44 4*/16/4/16/*4 Ar 30 0,6 50 70 17 97 0,63Semco Energy Kr 24 4*/6/4/6/*4 Kr 30 0,8 50 70 17 97 0,63Semco Energy Kr 28 4*/8/4/8/*4 Kr 30 0,7 50 70 17 97 0,63Semco Energy Kr 32 4*/10/4/10/*4 Kr 30 0,6 50 70 17 97 0,63Semco Energy Kr 36 4*/12/4/12/*4 Kr 30 0,5 50 70 17 97 0,63Semco Energy Kr 36 4/12/*4/12/*4 Kr 30 0,5 53 70 16 97 0,66Semco Star+ 24 4/16/*4 Ar 20 1,0 53 70 19 97 0,66Semco Star+ 16 4/8/*4 Kr 20 1,1 53 70 19 97 0,66Semco Star+/A Kr 18 4/10/*4 Kr 20 0,9 53 70 19 97 0,66Semco Star+/A Kr 20 4/12/*4 Kr 20 0,9 53 70 19 97 0,66Semco Energy+ 28 4*/8/4/8/*4 Ar 30 0,9 37 56 26 95 0,46Semco Energy+ 32 4*/10/4/10/*4 Ar 30 0,8 37 56 26 95 0,46

33Glass productGlass thicknessGlass structureoutside/PIS/inside(outside/PIS/center/PIS/inside)Gas typeWeightU g -valueDIN EN 673(ΔT=15K)g valueDIN EN 410Light transmissivity(D65) t vLight reflectionoutside (D65) r vColor reproductionindex Rab factor(shading coefficient)mm mm kg/m 2 W/m²K % % % %Semco Energy+ 36 4*/12/4/12/*4 Ar 30 0,7 37 56 26 95 0,46Semco Energy+ 36 4/12/*4/12/*4 Ar 30 0,7 41 56 26 94 0,51Semco Energy+ 40 4*/14/4/14/*4 Ar 30 0,6 37 56 26 95 0,46Semco Energy+ 44 4*/16/4/16/*4 Ar 30 0,5 37 56 26 95 0,46Semco Energy+ Kr 24 4*/6/4/6/*4 Kr 30 0,8 37 56 26 95 0,46Semco Energy+ Kr 28 4*/8/4/8/*4 Kr 30 0,6 37 56 26 95 0,46Semco Energy+ Kr 32 4*/10/4/10/*4 Kr 30 0,5 37 56 26 95 0,46Semco Energy+ Kr 36 4*/12/4/12/*4 Kr 30 0,4 37 56 26 95 0,46Semco Energy+ Kr 36 4/12/*4/12/*4 Kr 30 0,4 41 56 26 94 0,51Semco Energy 73/62 36 4*/12/4/12/*4 Ar 30 0,8 62 73 18 97 0,78Semco Energy 73/62 40 4*/14/4/14/*4 Ar 30 0,7 62 73 18 97 0,78Semco Energy 73/62 44 4*/16/4/16/*4 Ar 30 0,7 62 73 18 97 0,78Semco Energy 73/62 Kr 36 4*/12/4/12/*4 Kr 30 0,6 62 73 18 97 0,78Solar protection glassSemco Sun+ 270/1 silver-gray 26 *6/16/*4 Ar 25 1,0 22 23 35 93 0,28Standard recommendation color-matched Semco COLOR facade panel: Type SC 8393 E or SC 8247 ESemco Sun+ 270/2 steel-gray 26 ESG-H6*/16/*4 Ar 25 1,0 23 24 13 94 0,29Standard recommendation color-matched Semco COLOR facade panel: Type SC 8417 ESemco Sun+ 340/1 silver-blue 26 *6/16/*4 Ar 25 1,0 23 31 38 85 0,29Standard recommendation color-matched Semco COLOR facade panel: Type SC 8392 ESemco Sun+ 340/2 steel-blue 26 ESG-H6*/16/*4 Ar 25 1,0 24 32 20 85 0,30Standard recommendation color-matched Semco COLOR facade panel: Type SC 8375 ESemco Sun+ 350/1 silver-amber 26 *6/16/*4 Ar 25 1,0 28 31 36 91 0,35Standard recommendation color-matched Semco COLOR facade panel: Type SC 8374 ESemco Sun+ 350/2 steel-amber 26 6*/16/*4 Ar 25 1,0 29 32 31 91 0,36Standard recommendation color-matched Semco COLOR facade panel: Type SC 9532 ESemco Sun+ 450/1 silver-green 26 *6/16/*4 Ar 25 1,0 24 40 39 91 0,30Standard recommendation color-matched Semco COLOR facade panel: Type SC 8376 ESemco Sun+ 450/2 steel-green 26 ESG-H6*/16/*4 Ar 25 1,0 25 40 28 91 0,31Standard recommendation color-matched Semco COLOR facade panel: Type SC 8389 ESemco Sun+ 550/1 silver-light 26 *6/16/*4 Ar 25 1,0 40 50 42 95 0,50Standard recommendation color-matched Semco COLOR facade panel: Type SC 8373 ESemco Sun+ 550/2 steel-silver 26 6*/16/*4 Ar 25 1,0 40 50 41 95 0,50Standard recommendation color-matched Semco COLOR facade panel: Type SC 8372 ESemco Sun+ 330 gray 26 ESG6/16/*4 Ar 25 1,0 29 34 8 95 0,36Standard recommendation color-matched Semco COLOR facade panel: Type SC 8642 ESemco Sun+ 400 bronze 26 ESG6/16/*4 Ar 25 1,0 32 39 9 92 0,40Standard recommendation color-matched Semco COLOR facade panel: Type SC 8643 ESemco Sun+ 600 green 26 ESG6/16/*4 Ar 25 1,0 37 60 16 90 0,46Standard recommendation color-matched Semco COLOR facade panel: Type SC 8644 Ewith cleaning-supported effect:Semco Dur Clean Star+ 26 *ESG6/16/*4 Ar 25 1,0 43 56 35 97 0,54Semco Dur Clean Star+ 30 *ESG6/16/*VSG8-0,76 Ar 35 1,0 43 55 36 97 0,54Semco Dur Clean Star+ 32 *ESG8/16/*VSG8-0,76 Ar 40 1,0 42 54 36 96 0,53Standard recommendation color-matched Semco COLOR facade panel: Type SC 8508 ESemco Clean Classico Star+ 26 *ESG6/16/*4 Ar 25 1,0 30 48 33 92 0,38Semco Clean Classico Star+ 30 *ESG6/16/*VSG8-0,76 Ar 35 1,0 30 47 33 91 0,38Semco Clean Classico Star+ 32 *ESG8/16/*VSG8-0,76 Ar 40 1,0 26 44 33 88 0,33Standard recommendation color-matched Semco COLOR facade panel: Type SC 8363 E

34SPECIFICATIONSGlass productGlass thicknessGlass structureoutside/PIS/inside(outside/PIS/center/PIS/inside)Gas typeWeightU g -valueDIN EN 673(ΔT=15K)g valueDIN EN410Light transmissivity(D65) t vLight reflectionoutside (D65) r vColor reproductionindex Rab factor(shading coefficient)Evaluated soundinsulation valueR w(C;C tr)Sound protection and thermal insulation glazingmm mm kg/m 2 W/m²K % % % % dBSemco Phone 37/8 S (monolithic) 8 VSG8-0,76SC - 21 - - - - - - 37 (-1;-4)Semco Phone 39/10 S (monolithic) 10 VSG10-0,5SI - 26 - - - - - - 39 (-1;-3)Semco Phone 40/12 S (monolithic) 12 VSG12-0,5SI - 31 - - - - - - 40 (-1;-2)Semco Phone 42/16 S (monolithic) 16 VSG16-0,5SI - 40 - - - - - - 42 (-1;-2)Semco Phone 32/24 Star 24 4/16/*4 Ar 20 1,1 63 79 13 98 0,79 32Semco Phone 36/26 Star 26 6/16/*4 Ar 25 1,1 61 79 13 98 0,76 36 (-1;-5)Semco Phone 37/28 Star 28 8/16/*4 Ar 30 1,1 60 78 12 97 0,75 37 (-2;-6)Semco Phone 38/28 Star 28 VSG8-0,76/16/*4 Ar 30 1,1 57 77 13 97 0,71 38 (-2;-6)Semco Phone 38/30 Star 30 8/16/*6 Ar 35 1,1 60 78 12 97 0,75 38 (-2;-6)Semco Phone 39/32 Star 32 10/16/*6 Ar 40 1,1 59 77 12 96 0,74 39 (-2;-4)Semco Phone 39/32 Star 32 VSG8-0,38/16/*VSG8-0,38 Ar 40 1,1 57 77 13 96 0,71 39Semco Phone 39/28 Star 28 VSG6-0,5SI/16/*6 Ar 31 1,1 57 78 12 97 0,71 39 (-1;-5)Semco Phone 40/30 Star 30 VSG8-0,76/16/*6 Ar 35 1,1 57 77 13 97 0,71 40Semco Phone 40/34 Star 34 10/20/*4 Ar 35 1,2 59 78 12 97 0,74 40 (-2;-6)Semco Phone 41/36 Star 36 10/20/*6 Ar 40 1,2 59 77 12 96 0,74 41 (-2;-5)Semco Phone 41/30 Star 30 VSG6-0,5SI/16/*8 Ar 35 1,1 57 77 12 97 0,71 41 (-2;-6)Semco Phone 41/30 Star 30 VSG8-0,5SI/16/*6 Ar 36 1,1 56 77 12 97 0,70 41 (-2;-7)Semco Phone 42/32 Star 32 VSG8-0,5SI/16/*8 Ar 41 1,1 56 77 12 96 0,70 42 (-2;-6)Semco Phone 43/34 Star 34 VSG10-0,5SI/16/*8 Ar 46 1,1 55 76 12 96 0,69 43 (-2;-6)Semco Phone 45/34 Star 34 VSG8-0,5SI/16/*10 Ar 46 1,1 56 76 12 96 0,70 45 (-2;-6)Semco Phone 47/32 Star 32 VSG12-0,5SI/12/*VSG8-0,5SI Ar 51 1,3 54 75 12 95 0,68 47 (-2;-6)Semco Phone 49/36 Star 36 VSG12-0,5SI/16/*VSG8-0,5SI Ar 51 1,1 54 75 12 95 0,68 49 (-3;-8)Semco Phone 50/40 Star 40 VSG12-0,5SI/20/*VSG8-0,5SI Ar 51 1,2 54 75 12 95 0,68 50 (-3;-8)Semco Phone 32/36 Energy 36 4*/12/4/12/*4 Ar 30 0,7 50 70 17 97 0,63 32 (-1;-5)Semco Phone 37/38 Energy 38 6*/12/4/12/*4 Ar 35 0,7 49 69 16 96 0,61 37 (-2;-6)Semco Phone 39/42 Energy 42 8*/12/4/12/*6 Ar 45 0,7 48 68 16 96 0,60 39 (-2;-5)Semco Phone 41/44 Energy 44 10*/12/4/12/*6 Ar 50 0,7 47 68 16 95 0,59 41 (-2;-4)Semco Phone 43/42 Energy 42 VSG8-0,5SI*/12/4/12/*6 Ar 45 0,7 45 68 16 96 0,56 43 (-2;-6)Semco Phone 45/44 Energy 44 VSG8-0,5SI*/12/4/12/*8 Ar 50 0,7 45 67 16 95 0,56 45 (-2;-6)Semco Phone 46/48 Energy 48 VSG10-0,5SI*/12/6/12/*VSG8-0,5SI Ar 60 0,7 44 66 16 94 0,55 46 (-1;-7)Manual attack resistant thermal insulation glazingImpact-resistant glazingSemco Safe P2A Star (RC1) 1 28 VSG8-0,76/16/*4 Ar 31 1,1 57 77 13 97 0,71 -Semco Safe P4A Star (RC2) 1 29 VSG8-1,52/16/*4 Ar 32 1,1 57 78 13 97 0,71 -Semco Safe P5A Star (RC3) 1 33 VSG10/16/*6 Ar 38 1,1 56 78 13 97 0,70 -Semco Safe P4A Star (RC2) 1 23 VSG8-1,52/10/*4 Kr 30 1,0 57 78 13 97 0,71 -Penetration-resistant glazingSemco Safe P6B Star (RC4) 1 40 VSG18/16/*6 Ar 57 1,1 51 73 15 94 0,64 -Semco Safe P7B Star (RC5) 1 49 VSG27/16/*6 Ar 64 1,1 46 70 16 92 0,58 -Semco Safe P8B Star (RC6) 1 54 VSG32/16/*6 Ar 75 1,1 44 68 16 91 0,55 -Data in brackets: Corresponding resistance class as per DIN EN 1627, Issue August 2011Bullet-resistant glazing (monolithic)Semco Safe BR3-S P6B/28 (bank glazing)² VSG28 - 68 - - - - - - -Semco Safe BR3-S P7B/38 (bank glazing)² VSG38 - 90 - - - - - - -1) Resistance class as per DIN EN 356, data in brackets: Minimum resistance class for glazing as per DIN EN 1627, Issue Sept. 2011, Table 12) Resistance class as per DIN EN 1063 and DIN EN 356

GLOSSARY35Ug valueg valueUnit of measurement for heat loss of glazing. The smaller the Ug value, the better the thermal insulation.Ug values determined for vertical installation as per DIN EN 673. For physical reasons, the Ug value of insulation glazingincreases dependent on inclination angle when installed at an angle.Unit of measurement for total energy transmittance through glazing.High g value: Additional and free thermal use of sunshine.Low g value: Reduction of summer heating of rooms due to sunshine.Light transmissionDegree of light transmittance in percent. Indicates the percentage of visible light (for the radiation band between 380 nmand 780 nm) that can pass through the glass and is therefore dependent on the glass thickness and coatings.The higher the light transmission, the greater the daylight utilization.Degree of light reflectionThe percentage of visible light (for the radiation range from 380 nm to 780 nm) that is mirrored or reflected on the glasspane surface. A high degree of light reflection means a reduction of glare inside the room.R a valueThe general color reproduction index Ra describes the color impression that the human eye has when viewing an objectilluminated by daylight coming through glazing. With clear glass, R ais 99%.Shading coefficient (b-factor)Average transparency factor of solar energy, based on the total energy transmittance of a double glazing insulation glass,used to calculate the cooling load of glazed rooms.Shading coefficient (b factor) = g value / 0.80 (VDI 2078)R w valueFacade panelsValue for the sound insulation. The higher the sound insulation value, the better the sound insulation.In addition to the sound insulation value, the frequency of the sound source is taken into account with correction factors(C; C (C; C tr) for good noise insulation.Facade panels made of enamelled glass matched in color to the glazing. As color impressions are subjectively evaluated,sampling is recommended before specifying the glazing. The facade panels are mainly used to cover blank sections onbuildings, e.g. ceilings.Glass thickness measurementThe person ordering our products is responsible for ensuring the correct measurement of glass thickness, depending on theapplication, according to the applicable technical regulations and standards.• Combinations with different glass thicknesses are possible.• Dimensional tolerances, see DIN EN 572-8• Tolerance for the emissivity of the coatings: + 0.01 (as per RAL quality criteria)• Tolerance for the Ug value: + 0.1 W/m²K (as per RAL quality criteria)• Tolerance for the g value: ± 0.02 (as per RAL quality criteria)• The functional values given here for the glass products were determined with calculation software validated andcertified by ift Rosenheim (Test Report No. 41041462). The data for the software was based on functional values onstandard structures determined according to the relevant and currently valid test standards by correspondinglyaccredited test institutes. Formats and combinations deviating from this can lead to a change in individual functionalvalues.• The light and radiation-related physical data are calculated or measured values that may fluctuate by ± 2 or 3%depending on the glass manufacturer and the glass thickness, as well as unavoidable production tolerances. Thedata shown here are therefore subject to change.

With more than 20 sites in three regions across the nation, Semcoglas is one of the leading complete suppliers for architectural glass.The Service centers in the individual regions are closely networked with our application engineering and product development sites.So we can achieve the optimum solution for every challenge together with you. That‘s a promise.Your SEMCOGLAS Partnerwww.semcoglas.com1/2012