User Manual Samsung SRD-470D/470DC DVR

• POS Device Setup : Sets the communication setups for thePOS device and DVR. It is independent to the Remote Device setup.POS DevicePOS USEPOS Device SetupPOS CH Preset Port/Ethernet1 None No preset NonePOS 2 Device None Setup No preset None3 None No preset NoneData Transfer Baudrate Parity Stop bit typeNo preset None4 None 8 Half 9600 None 1 DuplexOKCancelOKCancel• CH : Select the camera to be synchronized to the POSdevice. If selected a channel input field, “Sync Channel Setup” windowappears. One POS device can be synchronized to up to 4 cameras(channels), however one channel cannot be synchronized tomultiple POS devices. Channels to be synchronized to a POS device should be set to“Event” in “Main Menu > Record > Recording Schedule”.(Page 50)POS DevicePOS USEPOS Device SetupPOS CH Preset Port/Ethernet1 None No preset NoneNone Sync Channel Setup No preset 2 None3 None No preset NoneCH No 1 preset 2 3 44 None NoneOK CancelOK Cancel USING THE DVR• Preset : Sets the name, start and end strings of the receiptfor the preset. Preset name should be unique. Use button to display “Add Preset” window, and set itsname, start string, and end string.• Port/Ethernet : Sets the port number for the DVR and POSdevice connection. COM1 : For RS-232C connections 7001~7016 : For Ethernet connections3. When the POS Device setup is done, press .POS DevicePOS USE Preset SetupPOS Device SetupPOS CH Preset Port/Ethernet Add1 Add PresetNone No preset NoneNo. Name Start End char. Set DelInput2 None No preset None3 None • NameNo preset None4 None • Start Keyword No preset None5 None No preset None• End Keyword6 None No preset None7 None No preset NoneOK Cancel8 None No preset NonePrevious/Next PageOK CancelOK CancelEnglish _47