Usermanual

More documents

Recommendations

Info

Unit 3: InstallationUNPACKING & PARTS IDENTIFICATIONUnpack the printer as directed in the following procedure.1 Place the shipping container (box) upright on a soid, flat surface.2 Open the box, remove any loose items and the first layer of packing material.3 Carefully lift the printer and accessories from the box and place them on a solid flat surface.4 Remove the plastic covers from the packed items and visually inspect for physical damage.5 Ensure all components are present as dictated on the Packing List.6 Report damaged property.Accessory BoxPrinterCushionShipping ContainerFigure 3-1, Unpacking & Parts IdentificationGL408-412e Operator’s Manual 3-2
Unit 3: InstallationPRINTER INSTALLATIONThis chapter provides guidance on how to station, connect, and load the printer once unpacked. Following printersetup, procede to the next chapter for information on interface selection.SITE LOCATION• Stationed on a solid flat surface.• Stationed away from hazardous materials.• Stationed within operational distance of the host based on interface specifications.CABLE CONNECTIONThe diagram below (Figure 3-2) displays the printer’s connectors and ports for power supply and host interfacing.For interfacing, choose the desired method and connect it’s respective cable as indicated.All interface boards are integrated except the LAN/WLAN board. This will have to be installed as shown.When the interface cable is connected, or the board is installed, the interface option will display in the configurationmenus of the operator panel. Refer to the Configuration unit of this manual to configure the printer for hostcomputer interfacing.NOTE: Multiple interface options may display in the printer’s LCD menus, thedesired option must be chosen.Host ComputerPrinterInterface CableInterface BoardLAN/WLAN PortParallel ConnectorUSB ConnectorSerial ConnectorPower CordPower ReceptacleFigure 3-2, Cable Connection DiagramGL408-412e Operator’s Manual 3-3
Page 1 and 2: GL4xxe Operator’s ManualGL4xxe se
Page 3 and 4: TABLE OF CONTENTSINTRODUCTIONAbout
Page 5 and 6: TROUBLESHOOTINGError Signal Trouble
Page 7 and 8: Unit 1: IntroductionABOUT THIS MANU
Page 9 and 10: Unit 1: IntroductionCONTROL FEATURE
Page 11 and 12: Unit 2: Technical DataPHYSICAL CHAR
Page 13 and 14: Unit 2: Technical DataCHARACTER FON
Page 15: Unit 3: InstallationINSTALLATION•
Page 19 and 20: Unit 3: InstallationFan-Fold MediaM
Page 21 and 22: Unit 3: InstallationCONTINUOUS MODE
Page 23 and 24: Unit 3: InstallationREADY/BUSY INTE
Page 25 and 26: Unit 3: InstallationUNIVERSAL SERIA
Page 27 and 28: Unit 3: InstallationWIRELESS LAN SI
Page 29 and 30: Unit 3: InstallationSTATUS5 TIMING
Page 31 and 32: Unit 3: InstallationEXTERNAL SIGNAL
Page 33 and 34: Unit 3: InstallationFigure 3-10, 14
Page 35 and 36: Unit 3: InstallationFigure 3-14, Op
Page 37 and 38: Unit 4: Printer ConfigurationPRINTE
Page 39 and 40: Unit 4: Printer ConfigurationCONFIG
Page 41 and 42: Unit 4: Printer ConfigurationADVANC
Page 43 and 44: Unit 4: Printer ConfigurationSERIAL
Page 45 and 46: Unit 4: Printer ConfigurationCENTRO
Page 47 and 48: Unit 4: Printer ConfigurationLOCAL
Page 49 and 50: Unit 4: Printer ConfigurationPGL EM
Page 51 and 52: Unit 4: Printer ConfigurationDGL EM
Page 53 and 54: Unit 4: Printer ConfigurationIGL EM
Page 55 and 56: Unit 4: Printer ConfigurationPRINTE
Page 57 and 58: Unit 4: Printer ConfigurationSOFT R
Page 59 and 60: Unit 4: Printer ConfigurationUSER M
Page 61 and 62: Unit 4: Printer ConfigurationUSER M
Page 67 and 68:
Unit 4: Printer ConfigurationADVANC
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Unit 4: Printer ConfigurationSERIAL
Page 79 and 80:
Unit 4: Printer ConfigurationSERIAL
Page 81 and 82:
Unit 4: Printer ConfigurationPARALL
Page 83 and 84:
Unit 4: Printer ConfigurationPARALL
Page 85 and 86:
Unit 4: Printer ConfigurationCENTRO
Page 87 and 88:
Unit 4: Printer ConfigurationUNIVER
Page 89 and 90:
Unit 4: Printer ConfigurationLOCAL
Page 91 and 92:
Unit 4: Printer ConfigurationLOCAL
Page 93 and 94:
Unit 4: Printer ConfigurationWIRELE
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Unit 4: Printer ConfigurationPGL EM
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Unit 4: Printer ConfigurationZGL EM
Page 107 and 108:
Unit 4: Printer ConfigurationZGL EM
Page 109 and 110:
Unit 4: Printer ConfigurationDGL EM
Page 111 and 112:
Unit 4: Printer ConfigurationDGL EM
Page 113 and 114:
Unit 4: Printer ConfigurationTGL EM
Page 115 and 116:
Unit 4: Printer ConfigurationSelect
Page 117 and 118:
Unit 4: Printer ConfigurationIGL EM
Page 119 and 120:
Unit 4: Printer ConfigurationDIAGNO
Page 121 and 122:
Unit 4: Printer ConfigurationDIAGNO
Page 123 and 124:
Unit 4: Printer ConfigurationPRINTE
Page 125 and 126:
Unit 5: TroubleshootingTROUBLESHOOT
Page 127 and 128:
Unit 5: TroubleshootingERROR SIGNAL
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Unit 5: TroubleshootingNO PRINTED I
Page 135 and 136:
Unit 5: TroubleshootingLAN ETHERNET
Page 137 and 138:
Unit 5: TroubleshootingNOTE: The on
Page 139 and 140:
Unit 6: MaintenanceCLEANING PROCEDU
Page 141 and 142:
Unit 6: MaintenanceFUSE REPLACEMENT
Page 143 and 144:
ADJUSTMENT PROCEDURESUnit 6: Mainte
Page 145 and 146:
Unit 6: MaintenancePRINT HEAD PRESS
Page 147 and 148:
Unit 6: MaintenanceRIBBON GUIDE ALI
show all

Usermanual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?