Publications - Cranfield University
Publications - Cranfield University
Publications - Cranfield University
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
IMRC Final Report<br />
Journal <strong>Publications</strong><br />
2002-2012<br />
2<br />
1
Journal <strong>Publications</strong> 2012<br />
Attia, U. M. and Alcock, J. R. (2012). “Fabrication of ceramic micro-scale hollow<br />
components by micro-powder injection moulding”, Journal of the European Ceramic<br />
Society, 32 (6), pp. 1199-1204.<br />
Durugbo, C., Hutabarat, W., Tiwari, A. and Alcock, J. (2012). “Information channel<br />
diagrams: An approach for modelling information flows”, Journal of Intelligent<br />
Manufacturing, DOI: 10.1007/s10845-011-0523-7.<br />
Kazanas, P., Deherekar, P., Almeida, P., Lockett, H. and Williams S. (2012).<br />
“Fabrication of geometrical features using wire and arc additive manufacture”,<br />
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of<br />
Engineering Manufacture, DOI: 10.1177/0954405412437126.<br />
Martina, F., Mehnen, J., Williams, S. W., Colegrove, P. and Wang, F. (2012).<br />
“Investigation of the benefits of plasma deposition for the additive layer manufacture<br />
of Ti–6Al–4V”, Journal of Materials Processing Technology, 212, pp. 1377-1386.<br />
Reia da Costa, E. F. and Skordos, A. A. (2012). “Modelling flow and filtration in liquid<br />
composite moulding of nanoparticle loaded thermosets”, Composites Science and<br />
Technology, DOI: 10.1016/j.compscitech.2012.02.007.<br />
Reia da Costa, E. F., Skordos, A. A., Partridge, I. K. and Rezai A. (2012). “RTM<br />
processing and electrical performance of carbon nanotube modified epoxy/fibre<br />
composites”, Composites Part A: Applied Science and Manufacturing, 43 (4), pp.<br />
593-602.<br />
Romero Rojo, F. J., Roy, R., Shehab, E. and Cheruvu,K. (2012). “A study on<br />
obsolescence resolution profiles”, Proceedings of the Instiution of Mechanical<br />
Engineers Part B Journal of Engineering Manufacture, 226 (1), pp. 167-177.<br />
Romero Rojo, F. J., Roy, R., Shehab, E., Cheruvu, K. and Mason, P. (2012). “A cost<br />
estimating framework for electronic, electrical and electromechanical (EEE)<br />
components obsolescence within the use-oriented product-service systems<br />
contracts”, Proceedings of the Instiution of Mechanical Engineers Part B Journal of<br />
Engineering Manufacture, 226 (1), pp. 154-166.<br />
2
Journal <strong>Publications</strong> 2011<br />
Adeogun, O., Tiwari, A. and Alcock, J. (2011). “Capabilities of proprietary<br />
intermediate telehealth devices”, Telemedicine and e-Health, 17 (9), pp. 712-721.<br />
Adeogun, O., Tiwari, A. and Alcock, J. (2011). “Models of information exchange for<br />
UK telehealth systems”, International Journal of Medical Informatics, 80 (5), pp. 359-<br />
370.<br />
Assuncao, E., Ganguly, S., Yapp, D., Williams, S. and Paradowska, A. (2011).<br />
“Characterisation of residual stress state in laser welded low carbon mild steel plates<br />
produced in keyhole and conduction mode”, Science and Technology of Welding and<br />
Joining, 16 (3), pp. 239-243.<br />
Attia, U.M. and Alcock, J. R. (2011). “Evaluating and controlling process variability in<br />
micro-injection moulding”, International Journal of Advanced Manufacturing<br />
Technology, 52 (1-4), pp. 183-194.<br />
Attia, U. M. and Alcock, J. R. (2011). “A review of micro-powder injection moulding as<br />
a microfabrication technique”, Journal of Micromechanics and Microengineering, 21<br />
(4), 043001.<br />
Bianchi, F. and Zhang, X. (2011). “A cohesive zone model for predicting<br />
delamination suppression in z-pinned laminates”, Composites Science and<br />
Technology, 71, pp. 1898-1907.<br />
Dimopoulos, A., Skordos, A. A. and Partridge, I. K. (2011). “Cure kinetics, glass<br />
transition temperature development and dielectric spectroscopy of a low temperature<br />
cure epoxy/amine system”, Journal of Applied Polymer Science, 124 (3), pp. 1899-<br />
1905.<br />
Ding, J., Colegrove, P., Mehnen J., Ganguly S., Sequeira Almeida, P.M., Wang, F.<br />
and Williams, S. (2011). “Thermo-mechanical analysis of Wire and Arc Additive Layer<br />
Manufacturing process on large multi-layer parts”, Computational Materials Science,<br />
50 (12), pp. 3315-3322.<br />
Durugbo, C., Tiwari, A. and Alcock, J. (2011). “A review of information flow<br />
diagrammatic models for product-service systems”, International Journal of<br />
Advanced Manufacturing Technology, 52 (9-12), pp. 1193–1208.<br />
Durugbo, C., Hutabarat, W., Tiwari, A. and Alcock, J. (2011). “Modelling collaboration<br />
using complex networks”, Information Sciences, 181 (15), pp. 3143–3161.<br />
Durugbo, C., Tiwari, A. and Alcock, J. (2011). “Service delivery for microsystems<br />
production: A study”, CIRP Journal of Manufacturing Science and Technology, 4 (1),<br />
pp. 101-109.<br />
Erkoyunku, J. A., Roy, R., Shehab, E. and Cheruvu, K. (2011). “Understanding<br />
Service Uncertainties in Industrial Product Service System Cost Estimation”, The<br />
International Journal of Advanced Manufacturing Technology, 52 (9-12), pp. 1223-<br />
1238.<br />
Farnsworth, M., Benkhelifa, E., Tiwari, A., Zhu, M. and Moniri, M. (2011). “An efficient<br />
evolutionary multi-objective framework for MEMS design optimisation: Validation,<br />
comparison and analysis”, Memetic Computing, 3 (3), pp.175-197.<br />
3
Lockett, H.L., Johnson, M., Evans, S. and Bastl, M. (2011). “A paradox of<br />
interdependence. A case study into the impact of the provision of Product-Service<br />
Systems on Supply Chain relationships”, Journal of Manufacturing Technology<br />
Management, 22 (3), pp. 293-313.<br />
Lockett, H. L., Johnson, M., Evans, S. E., Bastl, M. (2011). “Product Service Systems<br />
and Supply Network Relationships: An Exploratory Case Study”, Journal of<br />
Manufacturing Technology Management, 22, (3), pp. 293-313.<br />
Macdonald, E. K., Wilson, H., Martinez, V. and Toossi, A. (2011). “Assessing valuein-use:<br />
a conceptual framework and exploratory study”; Industrial Marketing<br />
Management, 40 (5), pp. 671-682.<br />
Marson, S., Attia, U.M., Lucchetta, G., Wilson, A., Alcock, J. and Allen, D. (2011).<br />
“Flatness optimization of micro-injection moulded parts: the case of a PMMA<br />
microfluidic component”, Journal of Micromechanics and Microengineering, 21 (11),<br />
article number 115024.<br />
Mittermeyer, S. A., Njuguna, J. A., and Alcock, J. R. (2011). “Product-service<br />
systems in health care: case study of a drug-device combination”, International<br />
Journal of Advanced Manufacturing Technology, 52, pp. 1210-1221.<br />
Panikowska, K., Tiwari, A. and Alcock, J. (2011). “Towards service-orientation: The<br />
state of service thoughts in the microfluidic domain”, International Journal of<br />
Advanced Manufacturing Technology, 56 (1-4), pp. 135–142.<br />
Pickin, C. G., Williams, S. and Lunt, M. (2011). “Characterisation of the Cold Metal<br />
Transfer process and its use in low dilution cladding”, Journal of Materials Processing<br />
Technology, 21, pp. 496-502.<br />
Quintino, L., Miranda, R. M., Williams, S. and Kong, C. J. (2011). “Gas shielding in<br />
fibre laser welding of high strength pipeline steel”, Science and Technology of<br />
Welding and Joining, 16(5), pp. 399-404.<br />
Rush, M. T., Colegrove, P.A., Zhang, Z. and Broad, D. (2011). “Liquation and Postweld<br />
heat treatment cracking in Rene 80 Repair welds”, Journal of Materials<br />
Processing Technology, 212 (1), pp. 188-197.<br />
Suder, W., Ganguly, S., Williams, S., Paradowska, A. M. and Colegrove, P. (2011).<br />
“Comparison of joining efficiency and residual stresses in laser and laser hybrid<br />
welding”, Science and Technology of Welding and Joining, 16 (3), pp. 244-248.<br />
Wang, F., Williams, S. and Rush, M. (2011). “Morphology investigation on direct<br />
current pulsed gas tungsten arc welded additive layer manufactured Ti6Al4V alloy”,<br />
The International Journal of Advanced Manufacturing Technology, 57 (5-8), pp.597-<br />
603.<br />
4
Journal <strong>Publications</strong> 2010<br />
Adeogun, O., Tiwari, A., & Alcock, J. (2010). “Informatics-based product-service<br />
systems for point-of-care devices”, CIRP Journal of Manufacturing Science and<br />
Technology, 3 (2), pp. 107-115.<br />
Allen, D. M., Marson, S. (2010). “Computational modelling and optimisation of the<br />
fabrication of nano-structures using focused ion beam and imprint forming<br />
techniques”, Journal of Physics: Conference Series, 253, article number 012008.<br />
Allen, D.M., Simpkins, M. and Almond, H. (2010). “A novel photochemical machining<br />
process for magnesium aerospace and biomedical microengineering applications”<br />
Journal of Micromechanics and Microengineering, 20 (10), article number 105010.<br />
Almond, H. and Allen, D. (2010). “Etching forward”, Materials World 18, (2), pp.28-<br />
29.<br />
Attia, U. M. and Alcock, J. R. (2010). “A process chain for integrating microfluidic<br />
interconnection elements by micro-overmoulding of thermoplastic elastomers”<br />
Journal of Micromechanics and Microengineering, 20 (5), article number 055017.<br />
Attia, U. M. and Alcock, J. R. (2010). “Integration of functionality into polymer-based<br />
microfluidic devices produced by high-volume micro-moulding techniques”,<br />
International Journal of Advanced Manufacturing Technology, 48, pp. 973-991.<br />
Attia, U. M., and Alcock, J. R. (2010). “Optimising process conditions for multiple<br />
quality criteria in micro-injection moulding”, International Journal of Advanced<br />
Manufacturing Technology, 50, pp. 533-542.<br />
Azene, Y.T., Roy R., Farrugia D., Onisa, C., Mehnen J. and Trautmann H. (2010).<br />
“Work roll cooling system design optimisation in presence of uncertainty and<br />
constrains”, CIRP Journal of Manufacturing Science and Technology, 4 (2), pp. 290–<br />
298.<br />
Baines, T. S., Lightfoot, H., Benedettini, O., Whitney, D. and Kay, J. M. (2010). “The<br />
adoption of servitization strategies by UK-based manufacturers”, Proceedings of the<br />
Institution of Mechanical Engineers Part B – Journal of Engineering Manufacture 224,<br />
pp. 815-829.<br />
Baral, N., Cartie, D. D. R., Partridge, I. K., Baley, C. and Davies, P. (2010).<br />
“Improved impact performance of marine sandwich panels using through-thickness<br />
reinforcement: Experimental results”, Composites Part B – Engineering, 41 (2), pp.<br />
117-123.<br />
Bargir, S. and Allen, D. M. (2010), “Use of a PDMS spring element for ink jet printing<br />
applications”, Microsystem Technologies, 16 (7), pp. 239-1242.<br />
Bastl, M., Grubic, T., Templar, S., Harrison, A. and Fan, I. S. (2010). “Interorganisational<br />
costing approaches: the inhibiting factors”, International Journal of<br />
Logistics Management, 21(1), pp. 65-88.<br />
Battisti, A., Skordos, A. A. and Partridge, I.K. (2010). “Percolation threshold of carbon<br />
nanotubes filled unsaturated polyesters”, Composites Science and Technology, 70<br />
(4), pp. 633-637.<br />
5
Bortolani, F. and Dorey, R. A. (2010). “Molten salt synthesis of PZT powder for<br />
direct write inks”, Journal of the European Ceramic Society, 30 (10), pp. 2073-2079.<br />
Brinksmeier, E., Mutlugunes, Y., Klocke, F., Aurich, J. C., Shore, P. and Ohmori, H.<br />
(2010). “Ultra-precision grinding”, CIRP Annals Manufacturing Technology, 59 (2),<br />
pp. 652-671.<br />
Chandraprakaikul, W., Baines, T. S. and Lim, R. Y. (2010). “Strategic positioning of<br />
manufacturing operations within global supply chains”, Proceedings of the Institution<br />
of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (B5), pp.<br />
831-846.<br />
Cheng, K., and Shore, P. (2010). “Special issue on design of ultraprecision and<br />
micro machine tools and their key enabling technologies’, International Journal of<br />
Machine Tools and Manufacture, 50 (4), pp. 309-309.<br />
Dorey, R. A. (2010). “Piezo2009: Piezoelectric for end users V”, Advances in Applied<br />
Ceramics, 109 (3), pp. 129-129.<br />
Durazo-Cardenas, I. S., Corbett, J. and Stephenson, D. J. (2010). “The performance<br />
of a porous ceramic hydrostatic journal bearing’, Proceedings of the Institution of<br />
Mechanical Engineers Part J – Journal of Engineering Tribology, 224, (J1), pp. 81-<br />
89.<br />
Durazo-Cardenas, I. S., Stephenson, D. J. and Corbett, J. (2010). “Controlled<br />
Porosity Alumina Structures for Ultra-Precision Hydrostatic Journal Bearings”,<br />
Journal of the American Ceramic Society, 93 (11), pp. 3671-3678.<br />
Durugbo, C., Erkoyuncu, J., Tiwari, A., Alcock, J. R., Roy, R. and Shehab, E. (2010).<br />
“Data Uncertainty Assessment and Information Flow Analysis for Product-Service<br />
Systems: A Library Case Study”, International Journal of Services Operations and<br />
Informatics, 5 (4), pp. 330-350.<br />
Fielding, J. P., Mills, A. and Smith, H. (2010). “Design and manufacture of the<br />
DEMON unmanned air vehicle demonstrator vehicle”, Proceedings of the Institution<br />
of Mechanical Engineers part G – Journal of Aerospace Engineering, 224, pp.365-<br />
372.<br />
Grubic, T., Bastl, M., Fan, I. S., Harrison, A. and Templar, S. (2010). “Towards the<br />
integrative supply chain model”, International Journal of Logistics – Research and<br />
Applications, 13 (1), pp. 59-73.<br />
Grubic, T., Fan, I. S. (2010). “Supply chain ontology: Review, analysis and<br />
synthesis”, Computers in Industry, 61 (8), pp. 776-786.<br />
James, C. W., Comyn, T., Dorey, R. A., Underhill, D. and Milne, S.J. (2010). “Lasertransfer<br />
processing of functional ceramic films”, Journal of the European Ceramic<br />
Society, 30 (2), pp. 419-422.<br />
Jariyaboon, M., Davenport, A. J., Ambat, R., Connolly, B.J., Williams, S. W. and<br />
Price, D. A. (2010). “Effect of cryogenic cooling on corrosion of friction stir welded<br />
AA7010-T7651”, Anti-Corrosion Methods and Materials, 57 (2), pp. 83-89.<br />
Ko, M., Tiwari, A. and Mehnen, J. (2010). “A review of soft computing applications in<br />
supply chain management”, Applied Soft Computing, 10 (3), pp. 661-674.<br />
6
Koulikoff-Souviron, M. and Harrison, A. (2010). “Evolving HR Practices in a Strategic<br />
Intra-Firm Supply Chain”, Human Resource Management, 49 (5), pp. 913-938.<br />
Lettice, F., Wyatt, C., and Evans, S. (2010). “Buyer-supplier partnerships during<br />
product design and development in the global automotive sector: Who invests, in<br />
what and when?” International Journal of Production Economics, 127 (2), pp. 309-<br />
319.<br />
Li, P., Zdebski, D., Langen, H. H., Hoogstrate, A. M., Oosterling, J. A. J., Schmidt, R.<br />
H. M. and Allen, D. M. (2010). “Micromilling of thin ribs with high aspect ratios”,<br />
Journal of Micromechanics and Microengineering, 20 (11), article number 115013.<br />
Li, S.J., Ge, Y., Tiwari, A. and Cao, S. S. (2010). “A Temperature-Responsive<br />
Nanoreactor”, Small, 6 (21), pp. 2453-2459.<br />
Martinez, V., Bastl, M., Kingston, J. and Evans, S. (2010). “Challenges in<br />
transforming manufacturing organisations into product-service providers”, Journal of<br />
Manufacturing Technology Management, 21 (4), pp. 449-469.<br />
Martinez, V., Pavlov, A. and Bourne, M. (2010). “Reviewing performance: an<br />
analysis of the structure and functions of performance management reviews”,<br />
Production Planning and Control, 21 (1), pp. 70-83.<br />
Meier, H., Roy, R., and Seliger, G. (2010). “Industrial Product-Service Systems-<br />
IPS2’, CIRP Annals – Manufacturing Technology, 59 (2) pp. 607-627.<br />
Mills, A.R. and Jones, J. (2010). “Investigation, manufacture, and testing of damageresistant<br />
airframe structures using low-cost carbon fibre composite materials and<br />
manufacturing technology”, Proceedings of the Institution of Mechanical Engineers<br />
Part G – Journal of Aerospace Engineering, 224, pp. 489-497.<br />
Miranda, R., Quintino, L., Williams, S. and Yapp D. (2010). “Welding with High<br />
Power Fiber Laser API5L-X100 Pipeline Steel”, Advanced Materials Forum V Part 1<br />
and 2, 636-637, pp. 592,596.<br />
Mollen, A., and Wilson, H. (2010). “Engagement, telepresence and interactivity in<br />
online consumer experience: Reconciling scholastic and managerial perspectives”,<br />
Journal of Business Research, 63, pp. 919-925.<br />
Momoh, A., Roy, R. and Shehab, E. (2010). “Challenges in enterprise resource<br />
planning implementation: state-of-the-art”, Business Process Management Journal,<br />
16 (4), pp. 537-565.<br />
Ofem, U. U., Colegrove, P. A., Addison, A. and Russell, M. J. (2010). “Energy and<br />
force analysis of linear friction welds in medium carbon steel”, Science and<br />
Technology of Welding and Joining, 15, pp. 479-485.<br />
Paradowska, A. M., Suder, W. and Williams, S. (2010). “Neutron Diffraction Residual<br />
Stress Measurements in Key-Hole Laser Formed Weldments”, Journal of Physics:<br />
Conference Series, 251, pp. 1-4.<br />
Peng, T. J. A., Lin, N. J., Martinez, V. and Yu, C. M. J. (2010). “Managing triads in a<br />
military avionics service maintenance network in Taiwan’, International Journal of<br />
Operations and Production Management, 30, pp. 398-422.<br />
7
Peppard, J. (2010). “Unlocking the Performance of the Chief Information Officer<br />
(CIO)”, California Management Review, 52 (4), pp. 73-99.<br />
Pickin, C. G., Williams, S. W., Prangnell, P., Derry, C. and Lunt, M. (2010). “Control<br />
of weld composition when arc welding high strength aluminium alloys using multiple<br />
filler wires”, Science and Technology of Welding and Joining, 15 (6), pp. 491-496.<br />
Prentner, S., Allen, D. M., Larcombe, L., Marson, S., Jenkins, K. and Saumer, M.<br />
(2010). “Effects of channel surface finish on blood flow in microfluidic devices”,<br />
Microsystems Technologies, 16, 7, pp. 1091-1096.<br />
Richards, D. G., Prangnell, P. B., Withers, P. J., Williams, S. W., Nagy, T. and<br />
Morgan, S. (2010). “Efficacy of active cooling for controlling residual stresses in<br />
friction stir welds”, Science and Technology of Welding and Joining, 15 (2), pp. 156-<br />
165.<br />
Raja, J. Z., Green, S. D. and Leiringer, R. (2010). “Concurrent and disconnected<br />
change programmes: strategies in support of servitization and the implementation of<br />
business partnering”, Human Resource Management Journal, 20 (3), pp. 258-276.<br />
Rojo, F. J. R., Roy, R. and Shehab, E. (2010). “Obsolescence management for longlife<br />
contracts: state of the art and future trends”, International Journal of Advanced<br />
Manufacturing Technology, 49, pp. 1235-1250.<br />
Rush, M. T., Colegrove, P. A., Zhang, Z. and Courtot, B. (2010). “An investigation<br />
into cracking in nickel-base superalloy repair welds”, Advanced Materials Research,<br />
89-91, pp. 467-472.<br />
Salinas-Ruiz, M. D. M., Skordos, A. A. and Partridge, I. K. (2010). “Rubbertoughened<br />
epoxy loaded with carbon nanotubes: structure-property relationships”,<br />
Journal of Materials Science, 45 (10), pp. 2633-2639.<br />
Shehab, E. M., Bouin-Portet, M., Hole, R. and Fowler C. (2010). “Enhancing of<br />
Digital Design Data Availability in the Aerospace Industry”, CIRP Journal of<br />
Manufacturing Science and Technology, 2 (4), pp. 240-246.<br />
Shore, P., Cunningham, C., DeBra, D., Evans, C., Hough, J., Gilmozzi, R.,<br />
Kunzmann, H., Morantz, P. and Tonnellier, X. (2010). “Precision engineering for<br />
astronomy and gravity science”, CIRP Annals – Manufacturing Technology, 59 (2),<br />
pp. 694-716.<br />
Siedlok, F., Smart, P. and Gupta, A. (2010). “Convergence and reorientation via<br />
open innovation: the emergence of nutraceuticals”, Technology Analysis and<br />
Strategic Management, 22 (5), pp. 571-592.<br />
Stelling, M. T., Roy, R., Tiwari, A. and Majeed, B. (2010). “Evaluation of business<br />
processes using probability-driven activity-based costing”, Service Industries Journal,<br />
30 (13), pp. 2239-2260.<br />
Tan A., Matzen D., McAloone T. and Evans S. (2010), Strategies for Designing and<br />
Developing Services for Manufacturing Firms, CIRP Journal of Manufacturing<br />
Science and Technology, 3, pp. 90–97.<br />
8
Tiwari, A., Younis, K., Turner, C., Sackett, P. and Bautista, M.C. “Capturing and<br />
evaluating process information for high-performance complex manufacturing<br />
operations”, Journal of Manufacturing Technology Management, 21 (5), pp .585-603.<br />
Toossi, A., Lockett, H., Greenough, R., Macdonald, E. K. and Roozendaal E. (2010).<br />
“Maintenance outsourcing: A step towards Product-Service Systems”, Maintenance<br />
and Asset Management Journal, 25 (3), pp. 38-41.<br />
Van Hoek, R. and Johnson, M. (2010). “Sustainability and energy efficiency –<br />
Research implications from an academic roundtable and examples from Walmart and<br />
Cisco”, International Journal of Physical Distribution and Logistics Management, 40<br />
(1-2), pp. 148-158.<br />
Van Hoek, R., Johnson, M., Godsell, J. and Birtwistle, A. (2010). “Changing chains<br />
Three case studies of the change management needed to reconfigure European<br />
supply chains”, International Journal of Logistics Management, 21 (2), pp. 230-250.<br />
Vitanov, V. I., Javaid, N. and Stephenson, D .J. (2010). “Application of response<br />
surface methodology for the optimisation of micro friction surfacing process”, Surface<br />
and Coatings Technology, 204, 21-22, pp. 3501-3508.<br />
Wang, D., Rocks, S. A., Dorey, R. A. (2010). “Formation of PZT micro-scale<br />
structures using electrohydrodynamic atomization filling of metallic moulds”, Journal<br />
of the European Ceramic Society, 30 (8), pp. 1821-1826.<br />
Wen, S. W., Colegrove, P. A., Williams, S. W., Morgan, S. A., Wescott, A. and Poad,<br />
M. (2010). “Rolling to control residual stress and distortion in friction stir welds”,<br />
Science and Technology of Welding and Joining, 15 (6), pp. 440-447.<br />
Wen, S. W., Colegrove, P. A., Williams, S.W., Morgan, S. A., Wescott, A. and Poad,<br />
M. (2010). “Rolling to control residual stress and distortion in friction stir welds”,<br />
Science and Technology of Welding and Joining, 15, pp. 440-447.<br />
Wilson, S. A., Jourdain, R. P. and Owens, S. (2010). “Pre-stressed piezoelectric<br />
bimorph micro-actuators based on machined 40 mu m PZT thick films: batch scale<br />
fabrication and integration with MEMS”, Smart Materials and Structures, 19, 094001-<br />
094008<br />
Zarrelli, M., Skordos, A. A. and Partridge, I.K. (2010). “Toward a constitutive model<br />
for cure-dependent modulus of a high temperature epoxy during the cure”, European<br />
Polymer Journal, 46 (8), pp. 1705-1712.<br />
Zhu, M. L., Worthington, E. and Tiwari, A. (2010). “Design Study of Piezoelectric<br />
Energy-Harvesting Devices for Generation of Higher Electrical Power Using a<br />
Coupled Piezoelectric-Circuit Finite Element Method”, IEEE Transactions on<br />
Ultrasonics Ferroelectrics and Frequency Control, 57 (2), pp. 427-437.<br />
9
Journal <strong>Publications</strong> 2009<br />
Allen, D.M., Almond, H. J., Bedner, K., Cabeza, M., Courtot, B., Duval, A., Impey, S.<br />
A. and Saumer, M. (2009). “Processing and characterisation of precision microparts<br />
from nickel-based materials”, Microsystems Technologies, 15 (8), pp. 1287-1291.<br />
Allen, D. M., Shore, P., Evans, R. W., Fanara, C, O’Brien, W., Marson, S. and<br />
O’Neill, W. (2009). “Ion beam, focused ion beam, and plasma discharge machining”,<br />
Annals of the CIRP, 58 (2), pp. 647-662.<br />
Ajai, O., Tiwari, A. and Alcock J. R. (2009). “Evaluation of the State-of-the-Art in<br />
Informatics in Glucometers”, Informatics for Health and Social Care, 34 (3), pp. 171-<br />
179.<br />
Attia, U. M. and Alcock, J. R. (2009). “An evaluation of process-parameter and partgeometry<br />
effects on the quality of filling in micro-injection moulding”, Microsystems<br />
Technologies, 15, pp. 1861–1872 .<br />
Attia, U. M. and Alcock, J. R. (2009). “Integration of functionality into polymer-based<br />
microfluidic devices produced by high-volume micro-moulding techniques”,<br />
International Journal of Advanced Manufacturing Technology, 48 (9-12), pp. 973-991.<br />
Attia, U. M., Marson, S. and Alcock J. (2009). “Micro-injection moulding of polymer<br />
microfluidic devices”, Microfluidics and Nanofluidics, 7, pp. 1-28.<br />
Baines, T.S., Lightfoot, H. and Benedettini, O. (2009). “The Servitization of<br />
Manufacturing: a review of the literature”, Journal of Technology Management, 20<br />
(5), pp. 547 – 567.<br />
Baines, T. S., Lightfoot, H., Whitney, D. and Kay, J. M. (2009). “Servitized<br />
manufacture: Practical challenges of delivering integrated products and services”,<br />
Proceedings of the Institution of Mechanical Engineers, Part B, 223, pp. 1-9.<br />
Baines, T. S., Lightfoot, H., Peppard, J., Johnson, M., Tiwari, A., Shehab, E. and<br />
Swink M. (2009). “Towards an operations strategy for product-centric servitization”,<br />
Journal of Operations and Production Management, 29 (5), pp. 494-519.<br />
Battisti, A., Skordos, A. A. and Partridge I, K. (2009). “Dielectric monitoring of carbon<br />
nano-tube network formation in curing thermosetting nanocomposites”, Journal of<br />
Physics D: Applied Physics, 42 (15), article number 155402.<br />
Battisti, A., Skordos, A. A. and Partridge, I. K. (2009). “Monitoring dispersion of<br />
carbon nanotubes in a thermosetting polyester resin”, Composites Science and<br />
Technology, 69, pp. 1516-1520.<br />
Benedettini, O., Baines, T., Lightfoot, H. and Greenough, R. (2009). “State-of-the-art<br />
in Integrated Vehicle Health Management”, Proceedings of the Institution of<br />
Mechanical Engineers, Part G: Journal of Aerospace Engineering, 223 (2), pp. 157-<br />
170.<br />
Benkhelifa, E., Farnsworth, M., Bandi, G., Tiwari, A, Zhu, M. and Ramsden, J.<br />
(2009). “Design and Optimisation of Microelectromechanical Systems: A Review of<br />
the State-of-the-Art”, International Journal of Design Engineering, 3 (1), pp. 41-76.<br />
10
Cartie, D. D. R, Laffaille, J-M, Partridge, I. K. and Brunner, A. J. (2009). “Fatigue<br />
delamination behaviour of unidirectional carbon fibre/epoxy laminates reinforced by<br />
Z-Fiber (R) pinning”, Engineering Fracture Mechanics, 76, pp. 2834-2845.<br />
Colin de Verdiere, M., Pickett, A. K., Skordos, A. A. and Witzel, V. (2009).<br />
“Evaluation of the mechanical and damage behaviour of tufted non crimped fabric<br />
composites using full field measurements”, Composites Science and Technology, 69,<br />
pp. 131-138.<br />
Dimopoulos, A. Buggy, S. J., Skordos, A. A., James, S.W., Tatam R. P. and<br />
Partridge, I. K. (2009). “Monitoring cure in epoxies containing carbon nanotubes<br />
using an optical fibre Fresnel refractometer”, Journal of Applied Polymer Science,<br />
113 (2), pp. 730-735.<br />
Guo, S., Morishima, R., Zhang, X. and Mills A. (2009). “Cutout shape and<br />
reinforcement design for composite C-section beams under shear load”, Composite<br />
Structures, 88 (2), pp. 179-187.<br />
Pickin, C., Williams S., Prangnell, P and Lunt M. (2009). “Control of weld composition<br />
when welding high strength aluminium alloy using the tandem process”, Science and<br />
Technology of Welding and Joining, 14 (8), pp. 734-739.<br />
Rocks, S. A., Tredez, Q., Almond, H. J., Shaw, C. P. and Dorey R. A. (2009).<br />
“Bottom up fabrication of a nickel-lead zirconate titanate piezoelectric micro<br />
cantilevers”, Materials Letters, 63 (1), pp. 88-90.<br />
Roy, R. and Cheruvu K. S. (2009). “A competitive framework for industrial product<br />
service systems”, International Journal of Internet Manufacturing and Services, 2 (1),<br />
pp. 4-29.<br />
Trautmann, H. and Mehnen, J. (2009). “Preference-based Pareto optimization in<br />
certain and noisy environments”, Engineering Optimization, 41, pp. 23-38.<br />
Trautmann, H. and Mehnen J. (2009). “Statistical Methods for Improving Multiobjective<br />
Evolutionary Optimisation”, International Journal of Computational<br />
Intelligence, 5, pp. 72-78.<br />
Zhu, M., Worthington, E. and Njuguna J. (2009). “Analyses of power output of<br />
piezoelectric energy harvesting devices directly connected to a resistive load using a<br />
coupled piezoelectric-Circuit finite element method”, IEEE Transactions on<br />
Ultrasonics Ferroelectrics and Frequency Control, 56 (7), pp. 1309-1318.<br />
Zhu, M., Worthington, E. and Tiwari, A. (2009). “Design study of piezoelectric energy<br />
harvesting devices for generation of higher electrical power output using a coupled<br />
piezoelectric-circuit finite element method”, IEEE Transactions on Ultrasonics<br />
Ferroelectrics and Frequency Control, 57 (2), pp. 427-437.<br />
Zhu, M., Kirby, P., Wacklerle, M., Herz, M. and Richter M. (2009). “Optimization<br />
design of multi-material micropump using finite element method”, Sensors and<br />
Actuators A: Physical, 149 (1), pp. 130-135.<br />
11
Journal <strong>Publications</strong> 2008<br />
Ahnannai, B., Greenough, R. and Kay, J. (2008). “A decision support tool based on<br />
QFD and FMEA for the selection of manufacturing automation technologies”,<br />
Robotics And Computer-Integrated Manufacturing, 4, pp. 501-507.<br />
Brintrup, A. M., Ramsden, J., Takagi, H. and Tiwari, A. (2008). “Ergonomic chair<br />
design by fusing qualitative and quantitative criteria using interactive genetic<br />
algorithms”, IEEE Transactions On Evolutionary Computation, 3, pp. 343-354.<br />
Cheung, C.S., Topliss, S. M., James, S. W. and Tatam, R. P. (2008). “Response of<br />
fiber-optic long-period gratings operating near the phase-matching turning point to<br />
the deposition of nanostructured coatings”, Journal of the Optical Society of America<br />
B-Optical Physics, 6, pp. 897-902.<br />
Dorey, R. A., Rocks, S. A., Dauchy, F., Wang, D., Bortolani, F. and Hugo, E. (2008).<br />
“Integrating functional ceramics into microsystems”, Journal of The European<br />
Ceramic Society, 7, pp. 1397-1403.<br />
Fletcher, S. R., Baines, T. S. and Harrison, D. K. (2008). “An investigation of<br />
production workers' performance variations and the potential impact of attitudes”,<br />
International Journal of Advanced Manufacturing Technology, 35 (11-12), pp. 1113-<br />
1123.<br />
Harrison, A. and Skipworth, H. (2008). “Implications of form postponement to<br />
manufacturing: a cross case comparison”, International Journal of Production<br />
Research, 46 (1), pp. 173-195.<br />
Houseman, O., Coley, F. and Roy, R. (2008). “Comparing the cognitive actions of<br />
design engineers and cost estimators”, Journal of Engineering Design, 2, pp. 145-<br />
158.<br />
Jin, T. and Stephenson, D.J. (2008). “A study of the convection heat transfer<br />
coefficients of grinding fluids”, CIRP Annals-Manufacturing Technology, 57 (1), pp.<br />
367-370.<br />
Johnson, M. and Mena, C. (2008). “Supply chain management for servitised<br />
products: A multi-industry case study”, International Journal of Production<br />
Economics, 1, pp. 27-39.<br />
Koulikoff-Souviron, M. and Harrison, A. (2008). “Interdependent supply relationships<br />
as institutions: the role of HR practices”, International Journal of Operations and<br />
Production Management, 28 (5), pp. 412-432.<br />
Lockett, H. and Guenov, M. (2008). “Similarity measures for mid-surface quality<br />
evaluation”, Computer-Aided Design, 40 (3), pp. 368-380.<br />
Miranda, R. M., Lopes, G., Quintino, L., Rodrigues, J. P. and Williams, S. (2008).<br />
“Rapid prototyping with high power fiber lasers”, Materials and Design, 10, pp. 2072-<br />
2075.<br />
Monroy Aceves, C., Skordos, A. A. and Sutcliffe, M. P. F. (2008). “Design selection<br />
methodology for composite structures”, Materials and Design, 29, pp. 418-426.<br />
12
Richards, D. G., Prangnell, P. B., Williams, S. W. and Withers, P.J. (2008). “Global<br />
mechanical tensioning for the management of residual stresses in welds”, Materials<br />
Science And Engineering A-Structural Materials Properties Microstructure and<br />
Processing, 489, pp. 351- 362.<br />
Roy, R. (2008). “Cost Engineering”, Journal of Engineering Design, 19 (2), pp. 97-98.<br />
Roy, R. and Mehnen, J. (2008). “Dynamic Multi-objective Optimisation for Machining<br />
Gradient Materials”, CIRP Annals-Manufacturing Technology, 57, pp. 429-432.<br />
Roy, R., Souchoroukov, P. and Griggs, T. (2008) “Function-based cost estimating”,<br />
International Journal of Production Research, 10, pp. 2621-2650.<br />
Sarantavgas, G. F., Ford, H. D. and Tatam, R. P. (2008). “Imaging fibre bundles for<br />
Fizeau-based optical coherence tomography - art. no. 68470C”, Coherence Domain<br />
Optical Methods and Optical Coherence Tomography in Biomedicine XII, 6847, pp.<br />
8470-8470.<br />
Tiwari, A., Oduguwa, V. and Roy, R. (2008). “Rolling system design using<br />
evolutionary sequential process optimisation”, IEEE Transactions on Evolutionary<br />
Computation, 2, pp. 196-202.<br />
Tiwari, A., Sackett, P., Rehman, S. and Linton, H. (2008). “Good operations practice<br />
supervisor profiles in cell-centric manufacturing”, International Journal of Production<br />
Research, 15, pp. 4083-4110.<br />
Tiwari, A., Turner, C.J. and Majeed, B. (2008). “A review of business process<br />
mining: state-of-the-art and future trends”, Business Process Management Journal,<br />
14 (1), pp. 5-22.<br />
Tiwari, A., Vergidis, K. and Kuo, Y. (2008). “Computer assisted decision making for<br />
new product introduction investments”, Computers in Industry, 59, pp. 96-105.<br />
Tiwari, A., Vergidis, K., Lloyd, R. and Cushen, J. (2008). “Automated inspection using<br />
database technology within the aerospace industry”, Proceedings of the Institution of<br />
Mechanical Engineers Part B-Journal of Engineering Manufacture, 2, pp. 175-183.<br />
Vergidis, K., Tiwari, A. and Majeed, B. (2008). “Business process analysis and<br />
optimization: Beyond reengineering”, IEEE Transactions on Systems Man and<br />
Cybernetics, Part C-Applications and Reviews, 38 (1), pp. 69-82.<br />
Vergidis, K., Turner, C. J. and Tiwari, A. (2008). “Business process perspectives:<br />
Theoretical developments vs. real-world practice”, International Journal of Production<br />
Economics, 1, pp. 91-104.<br />
Vitanov, V. I., Tjahjono, B. and Marghalany, I. (2008). “Heuristic Rules-Based Logic<br />
Cell Formation Algorithm”, International Journal of Production Research, 46 (2), pp.<br />
321-344.<br />
Zarrelli, M., Skordos, A. A. and Partridge, I.K. (2008). “Thermomechanical analysis of<br />
a toughened thermosetting system”, Mechanics of Composite Materials, 44 (2), pp.<br />
181-190.<br />
Journal <strong>Publications</strong> 2007<br />
13
Almond, H. J. A., Allen, D .M. and Blondeau, S. (2007). “A technical and economic<br />
comparison of the photochemical machining of AISI 304 and AISI 201 stainless<br />
steels with ferric chloride etchants”, PCMI Journal, 105, pp. 14-16.<br />
Baines, T. S., Lightfoot, H. W., Evans, S., Neely, A. D., Greenough, R. M., Peppard,<br />
J., Roy, R., Shehab, E., Braganza, A., Tiwari, A., Alcock, J. R., Angus, J., Bastl, M.,<br />
Cousens, A., Irving, P., Johnson, M., Kingston, J. C., Lockett, H. L., Martinez, V.,<br />
Tranfield, D. R., Walton, I. M. and Wilson, H. (2007). “State-of-the-art in product<br />
service systems”, Proceedings of the Institution of Mechanical Engineers Part B-<br />
Journal of Engineering Manufacture, 221 (10), pp. 1543-1552.<br />
Baxter, D., Gao, J., Case, K., Harding, J., Young, R., Cochrane, S. and Dani, S.<br />
(2007). “An engineering design knowledge reuse methodology using process<br />
modelling”, Research in Engineering Design, 18 (1), pp. 37-48.<br />
Bradfield, D. and Gao, X. (2007). “A methodology to facilitate knowledge sharing in<br />
the new product development process”, International Journal of Production<br />
Research, 45 (7), pp. 1489-1504.<br />
Brown, N. J., Swift, K. G., Jared, G. E. M. and Rodriguez Toro, C. A. (2007).<br />
“Manufacturability in the Designers' Sandpit”, Proceedings of The Institution of<br />
Mechanical Engineers Part B-Journal of Engineering Manufacture, 221 (2), pp. 143-<br />
153.<br />
Bucknall, C. B. (2007). “Quantitative approaches to particle cavitation, shear<br />
yielding, and crazing in rubber-toughened polymers”, Journal of Polymer Science<br />
Part B-Polymer Physics, 45 (12), pp. 1399-1409.<br />
Buggy, S., Chehura, E., James, S. and Tatam, R. (2007). “Optical fibre grating<br />
refractometers for resin cure monitoring”, Journal of Optics A -Pure and Applied<br />
Optics, 9, pp. 60-65.<br />
Butcher, T. J. and Greenough, R. (2007). “Information systems support for CNC<br />
machinists: Evaluating the Impact of Information Technology at the Shopfloor”,<br />
Human Factors and Ergonomics in Manufacturing, 17 (9), pp. 299-314.<br />
Chehura, E., James, S. and Tatam, R. (2007). “Temperature and strain<br />
discrimination using tilted fibre bragg gratings”, Optics Communications, 275 (2), pp.<br />
344-347.<br />
Colegrove, P. A., Shercliff, H. R. and Zettler, R. (2007). “Model for predicting heat<br />
generation and temperature in friction stir welding from the material properties”,<br />
Science and Technology of Welding and Joining, 12, (4), pp. 284-297.<br />
Dauchy, F. and Dorey, R. A. (2007). “Patterned crack-free PZT thick films for microelectromechanical<br />
system applications”, International Journal of Advanced<br />
Manufacturing Technology, 33 (1-2), pp. 86-94.<br />
Dauchy, F. M. and Dorey, R. A. (2007). “Patterned high frequency thick film MEMS<br />
transducer”, Integrated Ferroelectrics, 90, pp. 42-52.<br />
Dell'Anno, G., Cartie, D. D. R., Partridge, I. K. and Rezai, A. (2007). “Exploring<br />
mechanical property balance in tufted carbon”, Composites Part A-Applied Science<br />
and Manufacturing, 38, pp. 2366-2373.<br />
14
Durazo-Cardenas, I. S., Shore, P., Luo, X., Jacklin, T., Impey, S. A. and Cox, A.<br />
(2007). “3D characterisation of tool wear whilst diamond turning silicon”, Wear, 262<br />
(3-4), pp. 340-349.<br />
Evans, S., Partidario, P. and Lambert, J. (2007). “Industrialization as a key element<br />
of sustainable product-service solutions”, International Journal of Production<br />
Research, 45 (18), pp. 4225-4246.<br />
Franco, M., Kennerley, M. P., Micheli, P., Martinez, V., Mason, S., Marr, B., Gray, D.<br />
and Neely, A. D. (2007). “Towards a definition of a business performance system”,<br />
International Journal of Operations & Production Management, 27, (8), pp. 784-801.<br />
Gao, X. and Baxter, D. (2007). “Guest editorial: Enabling technologies and<br />
frameworks for new product development: a selection of papers from ICMR2005",<br />
International Journal of Production Research, 45, (7), pp. 1485-1487.<br />
Greenough, R. and Tjahjono, B. (2007). “An Interactive Electronic Technical Manual<br />
for an Advanced Aerospace Assembly Machine”, International Journal of Advanced<br />
Manufacturing Technology, 33 (9), pp. 1045-1055.<br />
Groves, R., Chehura, E., Li, W., Staines, S. E., James, S. W. and Tatam, R. P.<br />
(2007). “Surface stain measurement: a comparison of speckle shearing<br />
interferometry and optical fibre bragg gratings with resistance foil strain gauges",<br />
Measurement Science & Technology, 18, pp. 1175-1184.<br />
Hadden, J., Tiwari, A., Roy, R. and Ruta, D. (2007). “Computer Assisted Customer<br />
Churn Management: State-of-the-art and Future Trends”, Computers & Operations<br />
Research, 34 (10), pp. 2902-2917.<br />
Jallow, A. K., Majeed, B., Vergidis, K., Tiwari, A. and Roy, R. (2007). “Operational<br />
risk analysis in business processes”, Bt Technology Journal, 25 (1), pp. 168-177.<br />
Julka, N., Baines, T. S., Tjahjono, B., Lendermann, P. and Vitanov, V. I. “A review of<br />
multi-criteria capacity expansion models for manufacturing plants: Search for a<br />
holistic decision process”, International Journal of Production Economics, 106 (2), pp.<br />
607-621.<br />
Leinvuo, J. T., Wilson, S. A., Whatmore, R. W. and Cain, M. G. (2007). “A new<br />
flextensional piezoelectric ultrasonic motor - design, fabrication and characterisation”,<br />
Sensors And Actuators A-Physical, 133 (1), pp. 141-151.<br />
Ma, B. J., Fan, Z. J. and Stephenson, D. J. (2007). “Influence of magnetic field<br />
distribution on ECM process”, Key Engineering Materials, 339, pp. 50-58.<br />
Mountney, S. and Gao, X. (2007). “A Knowledge System to Support Manufacturing<br />
Knowledge During Preliminary Design”, International Journal of Production<br />
Research, 45 (7), p. 1521-1537.<br />
Murphy, R. P., James, S. W. and Tatam, R. P. (2007). “Multiplexing of Fibre optic<br />
long period Grating based interferometric sensors”, Journal of Lightwave Technology,<br />
25, pp. 825-829.<br />
Oduguwa, V., Roy, R. and Farrugia, D. (2007). “Development of a soft computingbased<br />
framework for engineering design optimisation with quantitative and qualitative<br />
search spaces”, Applied Soft Computing, 7 (1), pp. 166-188.<br />
15
Partidario, P. J., Lambert, J. and Evans, S. (2007). “Building more sustainable<br />
solutions in production - consumption systems: the case of food for people with<br />
reduced access”, Journal of Cleaner Production, 15 (6), pp. 513 – 524.<br />
Quintino, L., Costa, A., Miranda, R., Yapp, D., Kumar, V. and Kong, C. (2007)<br />
“Welding with High Power Lasers - A preliminary study”, Materials and Design, 28<br />
(4), pp. 1231-1237.<br />
Ramsden, J. J., Allen, D. M., Stephenson, D. J., Alcock, J. R., Peggs, G. N., Fuller,<br />
G. D. and Goch, G. (2007). “The design and manufacture of biomedical surfaces”,<br />
CIRP Annals-Manufacturing Technology , 56 (2), pp. 687-711.<br />
Richards, D. G., Prangnell, P. B., Withers, P. J., Williams, S. W., Wescott, A. and<br />
Oliver, E.C. (2007). “FE Modelling of Mechanical Tensioning for Controlling Residual<br />
Stresses in Friction Stir Welds”, Materials Science Forum, 539-543, pp. 4025-4030.<br />
Skordos, A. A., Monroy Aceves, C. and Sutcliffe, M. P. F. (2007). “A simplified rate<br />
dependent model of forming and wrinkling of pre-impregnated woven composites”,<br />
Composites Part A-Applied Science and Manufacturing, 38 (5), pp. 1318-1330.<br />
Skordos, A. A. and Partridge, I. K. (2007). “Effects of Tool-Embedded dielectric<br />
sensors on heat transfer phenomena during composite cure”, Polymer Composites,<br />
28, pp. 139-152.<br />
Skordos, A. A. and Sutcliffe, M. P. F. (2007). “Stochastic simulation of woven<br />
composites forming”, Composites Science and Technology, 68 (1), pp. 283-296.<br />
Tan, C. K., Irving, P. and Mba, D. (2007). “A comparative experimental study on the<br />
diagnostic and prognostic capabilities of acoustics emission, vibration and<br />
spectrometric oil analysis for spur gears”, Mechanical Systems and Signal<br />
Processing, 21 (1), pp. 208-233.<br />
Tiwari, A., Turner, C. J. and Sackett, P. (2007). “A framework for implementing cost<br />
and quality practices within manufacturing”, Journal of Manufacturing Technology<br />
Management, 18 (6), pp. 731-760.<br />
Tonnellier, X., Morantz, P. M. H., Shore, P., Baldwin, A., Evans, R. and Walker, D. D.<br />
(2007). “Subsurface damage in precision ground ULE and Zerodur surfaces”, Optics<br />
Express, 15 (19), pp. 12197-12205.<br />
Vergidis, K., Tiwari, A., Majeed, B. and Roy, R. (2007). “Optimisation of business<br />
process designs: An algorithmic approach with multiple objectives”, International<br />
Journal of Production Economics, 109 (1-2), p. 105-121.<br />
Vitanov, V. I., Tjahjono, B. and Marghalany, I. (2007). “A Decision Support Tool to<br />
Facilitate the Design of Cellular Manufacturing Layouts”, Computers & Industrial<br />
Engineering, 52 (4), pp. 380-403.<br />
Wilson, S. A., Jourdain, R. P. R., Zhang, Q., Dorey, R. A., Bowen, C. R., Willander,<br />
M., Ul Wahab, Q., Willander, M., Al-Hilli, A. M., Nur, O., Quandt, E., Johansson, C.,<br />
Pagounis, E., Kohl, M., Matovic, J., Samel, B., Van Der Wijngaart, W., Jager, E. W.<br />
H., Carlsson, D., Djinovic, Z., Wegener, M., Moldovan, C., Iosub, R., Abad, E.,<br />
Wendlandt, M., Rusu, C. and Persson, K. (2007). “New Materials for Micro-scale<br />
16
Sensors and Actuators - an Engineering Review”, Materials Science & Engineering<br />
R-Reports, 56 (1-6), pp. 1-129.<br />
Zhao, Q., Liang, Y., Stephenson, D. J. Corbett, J. (2007). “Surface and subsurface<br />
integrity in diamond grinding of optical glasses on Tetraform 'C'”, International<br />
Journal of Machine Tools & Manufacture, 47 (14), pp. 2091-2097.<br />
17
Journal <strong>Publications</strong> 2006<br />
Achanga, P. Shehab, E. Roy, R. and Nelder, G. (2006). “Critical Success Factors<br />
for Lean Implementation within SMEs”, Journal of Manufacturing Technology<br />
Management, 17 (4), pp. 460-471.<br />
Allen, D.M. and Jefferies, P. (2006). “An economic, environment-friendly oxygenhydrochloric<br />
acid regeneration system for ferric chloride etchants used in<br />
photochemical machining”, CIRP Annals – Manufacturing Technology, 55 (1), pp.<br />
205-208.<br />
Angelidis, N., Wei, C.Y. and Irving, P.E. (2006). “Response to discussion of paper:<br />
The electrical resistance response of continuous carbon fibre composite laminates to<br />
mechanical strain”, Composites Part A – Applied Science and Manufacturing, 379,<br />
pp. 1495-1499.<br />
Baines, T., Lightfoot, H., Williams, G.M. and Greenough, R. (2006). “State-of-the-art<br />
in lean design engineering: a literature review on white collar lean”, Proceedings of<br />
the Institution of Mechanical Engineers Part B – Journal of Engineering Manufacture,<br />
220 (9), pp. 1539-1547.<br />
Barnes, R. A. (2006). “Fiber-reinforced polymer strengthening of concrete bridges<br />
that remain open to traffic: Discussion”, ACI Structural Journal, 2006, 103 (5), pp.<br />
754-754.<br />
Blackwell, P., Shehab, E. M. and Kay, J. M. (2006). “An effective decision-support<br />
framework for implementing enterprise information systems within SMEs”,<br />
International Journal of Production Research, 44 (17), pp. 3533-3552.<br />
Brintrup, A. M., Takagi, H., Tiwari, A. and Ramsden, J. (2006). “Evaluation of<br />
sequential, multi-objective, and parallel interactive genetic algorithms for multiobjective<br />
optimization problems”, Journal of Biological Physics and Chemistry, 6 (3),<br />
pp. 137-146.<br />
Bruno, G., Fanara, C., Guglielmetti, F. and Malard, B. (2006). “Characterization and<br />
residual stress analysis of wear resistant Mo thermal spray-coated steel gear<br />
wheels”, Surface and Coatings Technology, 2006, 200 (14-15), pp. 4266-4276.<br />
Cartie, D., Davies, P., Peleau, M. and Partridge, I. K. (2006). “The influence of<br />
hydrostatic pressure on the interlaminar fracture toughness of carbon/epoxy<br />
composites”, Composites Part B – Engineering, 37, pp. 292-300.<br />
Cartie, D. D. R., Dell'Anno, G., Poulin, E. and Partridge, I. K. (2006). “3D<br />
reinforcement of stiffener-to-skin T-joints by Z-pinning and tufting”, Engineering<br />
Fracture Mechanics”, 73 (16), pp. 2532-2540.<br />
Cartie, D. D.R., Troulis, M. and Partridge, I.K. (2006). “Delamination of Z-pinned<br />
carbon fibre reinforced laminates”, Composites Science and Technology, 66 (6), pp.<br />
855-861.<br />
Charrett, T. O.H. and Tatam, R. P. (2006). “Single camera three component planar<br />
velocity measurements using two-frequency planar Doppler velocimetry (2 nu-PDV)”,<br />
Measurement Science and Technology, 17 (5), pp. 1194-1206.<br />
18
Chau, E. T. F., Friend, C. M., Allen, D. M., Hora, J. and Webster, J. R. (2006). “A<br />
technical and economic appraisal of shape memory alloys for aerospace<br />
applications”, Materials Science and Engineering A-Structural Materials Properties<br />
Microstructure and Processing, 438-440, pp. 589-592.<br />
Cheung, W. M., Bramall, D. G., Maropoulos, P. G., Gao, J. X. and Aziz, H. (2006).<br />
“Organizational knowledge encapsulation and re-use in collaborative product<br />
development”, International Journal of Computer Integrated Manufacturing”, 19 (7),<br />
pp. 736-750.<br />
Ciurana, J., Ferrer, I. and Gao, J. X. (2006). “Activity model and computer aided<br />
system for defining sheet metal process planning”, Journal of Materials Processing<br />
Technology, 173 (2), pp. 213-222.<br />
Clarke, M. and Butcher, D. (2006). “Reconciling hierarchy and democracy - The<br />
value of management learning”, Management Learning, 37 (3), pp. 313-333.<br />
Comley, P., Walton, I., Jin, T. and Stephenson, D. J. (2006). “A high material removal<br />
rate grinding process for the production of automotive crankshafts”, CIRP Annals –<br />
Manufacturing Technology, 55 (1), pp. 347-350.<br />
Cook, M. B., Bhamra, T. A. and Lemon, M. (2006). “The transfer and application of<br />
Product Service Systems: from academia to UK manufacturing firms”, Journal of<br />
Cleaner Production, 14 (17), pp. 1455-1465.<br />
Davenport, A.J., Jariyaboon, M., Padovani, C., Tareelap, N., Connolly, B. J.,<br />
Williams, S. and Siggs, E. (2006). “Corrosion and protection of friction stir welds”,<br />
Materials Science Forum III Part 1-2, 519-521, pp. 699-704.<br />
Edwards, L., Fitzpatrick, M., Irving, P., Sinclair, I., Zhang, X. and Yapp, D. (2006).<br />
“An Integrated approach to the determination and consequences of residual stress<br />
on the fatigue performance of welded aircraft structures”, Journal of ASTM<br />
International, 3 (2), paper ID JAI12547.<br />
Emberson, C., Storey, J., Godsell, J. and Harrison, A. (2006). “Managing the supply<br />
chain using in store supplier-employed merchandisers”, International Journal of<br />
Retail and Distribution Management, 34 (6), pp. 467-481.<br />
Eti, M. C., Ogaji, S. O.T. and Probert, S. D. (2006). “Reducing the cost of preventive<br />
maintenance (PM) through adopting a proactive reliability-focused culture”, Applied<br />
Energy, 83 (11), pp. 1235-1248.<br />
Fanara, C., Shore, P., Nicholls, J. R., Lyford, N., Kelley, J., Carr, J. and Sommer, A.<br />
(2006). “New reactive atom plasma technology (RAPT) for precision machining: The<br />
etching of ULE (R) surfaces”, Advanced Engineering Materials, 8 (10), pp. 933-939.<br />
Fernando, G. F. and Degamber, B. (2006). “Process monitoring of fibre reinforced<br />
composites using optical fibre sensors”, International Materials Reviews, 51 (2), pp.<br />
65-106.<br />
Grassi, M., Cox, B. and Zhang, X. (2006). “Simulation of pin-reinforced single-lap<br />
composite joints”, Composites Science and Technology, 66, pp.1623-1638.<br />
19
Greenough, R. and Williams, D. (2006). “Investigating the Transfer of Techniques for<br />
Electronic Support Documentation from Aerospace to Machine Tools”, International<br />
Journal of Advanced Manufacturing Technology. 32 (7-8), pp. 774-779.<br />
Greve, L. and Pickett, A. K. (2006). “Delamination testing and modelling for<br />
composite crash simulation”, Composites Science and Technology, 66 (6), pp. 816-<br />
826.<br />
Greve, L. and Pickett, A. K. (2006). “Modelling damage and failure in carbon/epoxy<br />
non-crimp fabric composites including effects of fabric pre-shear”, Composites Part A<br />
– Applied Science and Manufacturing, 37 (11), pp. 1983-2001.<br />
Groves, R. M. Furfari, D., Barnes, S. E., James, S. W., Fu, S., Irving, P. and Tatam,<br />
R. P. (2006). “Full field Laser Shearography Instrumentation for detection and<br />
characterisation of fatigue cracks in titanium 10-2-3”, Journal of ASTM International,<br />
3 (4), paper ID JAI12757.<br />
Harrison, A. and Skipworth, H. (2006). “Implications of form postponement to<br />
manufacturing: a cross-case comparison”, International Journal of Production<br />
Research, 44 (8), pp. 1627-1652.<br />
Harrison, A. and White, A. (2006). “Intelligent distribution and logistics”, IEEE<br />
Transactions on Intelligent Transport Systems, 153 (2), pp. 167-180.<br />
Hillier, E. M. K. and Robinson, M. J. (2006). “Permeation measurements to study<br />
hydrogen uptake by steel electroplated with zinc-cobalt alloys”, Corrosion Science,<br />
48 (5), pp. 1019-1035.<br />
Houseman, O., Roy, R., Wainwright, C. and Lavdas, E. (2006). “Cost-Optimising<br />
Aircraft Systems at a Conceptual Design Stage”, International Journal of<br />
Manufacturing Technology, 15 (3-4), pp. 328-345.<br />
Huang, Z., Zhang, Q., Corkovic, S. and Dorey, R. (2006). “Comparative<br />
measurements of piezoelectric coefficient of PZT films by Berlincourt, interferometer,<br />
and vibrometer methods”, IEEE Transactions on Ultrasonics, Ferroelectrics and<br />
Frequency Control, 53 (12), pp. 2287-2293.<br />
James, S. W. and Tatam, R.P. (2006). “Fibre optic sensors with nano-structured<br />
coatings”, Journal of Optics A –Pure and Applied optics, 8 (7), Special Issue, SI<br />
S430-S444.<br />
Jin, T. and Stephenson, D. J. (2006). “Analysis of grinding chip temperature and<br />
energy partitioning in high-efficiency deep grinding”, Proceedings of the Institution of<br />
Mechanical Engineers Part B – Journal of Engineering Manufacture, 220 (5), pp.<br />
615-625.<br />
Jin, T. and Stephenson, D. J. (2006). “Heat flux distributions and convective heat<br />
transfer in deep grinding”, International Journal of Machine Tools and Manufacture,<br />
46(14), pp. 1862-1868.<br />
Jin, T. and Stephenson, D. J. (2006). “Optimising the process conditions in ultraprecision<br />
grinding to achieve surface finish of optical quality”, Advances in Grinding<br />
and Abrasive Technology XIII, Key Engineering Materials, 304-305, pp. 8-13.<br />
20
Juttner, U., Godsell, J. and Christopher, M. G. (2006). “Demand chain alignment<br />
competence - delivering value through product life cycle management”, Industrial<br />
Marketing Management, 35 (8), pp. 989-1001.<br />
Kerr, C. I. V., Roy, R. and Sackett, P. J. (2006). “Requirements management: an<br />
enabler for concurrent engineering in the automotive industry”, International Journal<br />
of Production Research, 44 (9), pp. 1703-1717.<br />
Koulikoff, M. and Harrison, A. (2006). “The pervasive human resource picture in<br />
interdependent supply relationships”, International Journal of Operations and<br />
Production Management, 27(1), pp. 8-27.<br />
Leahy, M., Mba, A., Cooper, P., Montgomery, A. and Owen, D. (2006). “Detecting<br />
shaft-to-seal rubbing in power generation turbines with the acoustic emission<br />
technology”, Journal of Vibration and Acoustics – Transactions of the ASME, 128 (6),<br />
pp.798-800.<br />
Leinvuo, J. T., Wilson, S. A., Whatmore, R. W. and Cain, M. G. (2006). “Flextensional<br />
ultrasonic piezoelectric micro-motor”, IEEE Transactions on Ultrasonics,<br />
Ferroelectrics and Frequency Control, 53 (12), pp. 2357-2366.<br />
Leng, J. S., Barnes, R. A., Hameed, A., Winter, D., Tetlow, J., Mays, G. C. and<br />
Fernando, G. F. (2006). “Structural NDE of concrete structures using protected EFPI<br />
and FBG sensors”, Sensors and Actuators A - Physical, 126 (2), pp. 340-347.<br />
Leng, J. S., Winter, D., Barnes, R. A., Mays, G. C. and Fernando, G. F. (2006).<br />
“Structural health monitoring of concrete cylinders using protected fibre optic<br />
sensors”, Smart Materials and Structures, 15 (2), pp. 302-308.<br />
Lim, Y., Guan R., Baines, T. S. and Tjahjono, B. and Chandraprakaikul, W. (2006).<br />
“Integrated Strategic Supply Chain Positioning Methodology for SMEs: an empirical<br />
study”, International Journal of Logistics Management, 17 (2), pp. 260-276.<br />
Ma, B., Zhu, Y. and Stephenson, D. J. (2006). “Experimental study on the growth<br />
behaviour of oxide layers in ELID pre-dressing process”, Materials Science Forum,<br />
532-591, pp. 588-591.<br />
Marasco, A. I., Cartie, D. D.R., Partridge, I. K. and Rezai, A. (2006). “Mechanical<br />
properties balance in novel Z-pinned sandwich panels: Out-of-plane properties”,<br />
Composites Past A – Applied Science and Manufacturing, 37 (2), pp. 295-302.<br />
McCarthy, I. P., Tsinopoulos, C., Allen, P. and Rose-Anderssen, C. (2006). “New<br />
product development as a complex adaptive system of decisions”, Journal of Product<br />
Innovation Management, 23 (5), pp. 437-456.<br />
Mills, A. (2006). “Development of an automated preforming technology for resin<br />
infusion processing of aircraft components”, Proceedings of the Institution of<br />
Mechanical Engineers Part G – Journal of Aerospace Engineering, 220 (G5), pp.<br />
499-505.<br />
Newman, J. C., Irving, P. E., Lin, J. and Le, D. D. “Crack growth predictions in a<br />
complex helicopter component under spectrum loading”, Fatigue and Fracture of<br />
Engineering Materials and Structures, 29 (11), pp. 949-958.<br />
21
Nicholls, J. R., and Rose, T. (2006). “Rapid cyclic oxidation tests, using joule heating<br />
of wire and foil materials”, Materials and Corrosion, 57(1), pp. 43-52.<br />
Oduguwa, P. A., Roy, R. and Sackett, P. J. (2006). “Cost impact analysis of<br />
requirement changes in the automotive industry: a case study”, Proceedings of the<br />
Institution of Mechanical Engineers Part B – Journal of Engineering Manufacture, 220<br />
(9), pp. 1509-1525.<br />
Oduguwa, V., Roy, R., Farrugia, D. (2006). “Design optimisation within quantitative<br />
and qualitative search space using approximate models”, Applied Soft Computing, 7<br />
(1), pp. 166-188.<br />
Oduguwa, V. and Roy, R. (2006). “A Review of Rolling System Design Optimisation”,<br />
International Journal of Machine Tools and Manufacture, 46 (7-8), pp. 912-928.<br />
Pickett, A. K. and Fouinneteau, M. R. C. (2006). “Material characterisation and<br />
calibration of a meso-mechanical damage model for braid reinforced composites”,<br />
Composites Part A – Applied Science and Manufacturing, 37 (2), pp. 368-377.<br />
Quintino, L., Costa, A., Miranda, R., Yapp, D., Kumar, V. and Kong, C. J. (2006).<br />
“Welding with high power lasers - a preliminary study”, Materials and Design, 28 (4),<br />
pp. 1231-1237.<br />
Roy, R. (2006). “Editorial”, International Journal of Production Research, 44 (9),<br />
pp.1657-1657.<br />
Ryan, P., Prangnell, P. B. and Williams, S.W. (2006). “Epitaxial grain growth during<br />
surface modification of friction stir welded aerospace alloys by a pulsed laser<br />
system”, Aluminium Alloys, Parts 1 and 2, Materials Science Forum, 519-521 (1-2),<br />
pp. 1169-1174.<br />
Sackett, P. J., Al-Gaylani, M. F., Tiwari, A. and Williams, D. “A review of data<br />
visualization: opportunities in manufacturing sequence management”, International<br />
Journal of Computer Integrated Manufacturing, 19 (7), pp. 689-704.<br />
Shehab, E. M. and Abdalla, H. S. (2006). “A cost-effective knowledge-based<br />
reasoning system for design for automation, Proceedings of the Institution of<br />
Mechanical Engineers Part B – Journal of Engineering Manufacture, 220 (5), pp.<br />
729-743.<br />
Shore, P., Morantz, P. and Lee, D. (2006). “Manufacturing and measurement of the<br />
MIRI spectrometer optics for the James Webb Space Telescope”, CIRP Annals –<br />
Manufacturing Technology, 55 (1), pp. 543-546.<br />
Skipworth, H. and Harrison, A. “Implications of form postponement to manufacturing<br />
a customized product”, International Journal of Production Research, 44 (8), pp.<br />
1627-1652.<br />
Stephenson, D., Sun, X. and Zervos, C. (2006). “A study on ELID ultra precision<br />
grinding of optical glass with acoustic emission”, International Journal of Machine<br />
Tools and Manufacture, 46 (10), pp. 1053-1063.<br />
Storey, J., Emberson, C., Godsell, J. and Harrison, A. (2006). “Supply chain<br />
management: theory, practice and future challenges”, International Journal of<br />
Operations and Production Management, 26 (7), pp. 754-774.<br />
22
Sun, X., Stephenson, D. J., Ohnishi, O. and Baldwin, A. (2006). “An investigation into<br />
parallel and cross grinding of BK7 glass”, Precision Engineering, 30 (2), pp. 145-153.<br />
Tatam, R. P. and Jones, J. D.C. (2006). “Editorial: Optical Fibre Sensors 17 (OFS-<br />
17)”, Measurement Science and Technology, 17 (5).<br />
Todinov, M. T. (2006). “Equations and a fast algorithm for determining the probability<br />
of failure initiated by flaws”, International Journal of Solids and Structures, 43 (17),<br />
pp. 5182-5195.<br />
Todinov, M. T. (2006). “Reliability analysis based on the losses from failures”, Risk<br />
Analysis, 26 (2), pp. 311-335.<br />
Varga, L. and Allen, P. (2006). “A case-study of the three largest aerospace<br />
manufacturing organisations: An exploration of organisational strategy, innovation<br />
and evolution”, Emergence: Complexity and Organisation, 8 (2), pp. 48-64.<br />
Vergidis, K., Tiwari, A.,Majeed, B. (2006). “Business process improvement using<br />
multi-objective optimisation”, BT Technology Journal, 24 (2), pp. 229-235.<br />
Walton, I. M., Stephenson, D. J. Baldwin, A. (2006). “The measurement of grinding<br />
temperatures at high specific material removal rates”, International Journal of<br />
Machine Tools and Manufacture, 46, pp. 1617-1625.<br />
Wells, M., Lee, D., Shore, P. and Morantz, P. (2006). “The MIRI spectrometer - IFUs<br />
in a cryogenic space environment”, New Astronomy Review, 50, pp. 290-293.<br />
Wilson, H. and Daniel, E. (2006). “The multi-channel challenge: a dynamic<br />
capabilities approach”, Industrial Marketing Management, 36 (1), pp. 10-20.<br />
Zarrelli, M., Partridge, I. K. and D'Amore, A. (2006). “Warpage induced in bi-material<br />
specimens: Coefficient of thermal expansion, chemical shrinkage and viscoelastic<br />
modulus evolution during cure”, Composites part A – Applied Science and<br />
Manufacturing, 37 (4), pp. 565-570.<br />
23
Journal <strong>Publications</strong> 2005<br />
Allen, D. M., Almond, H. J. A., Gaben, F. and Impey, S. (2005). “The causes and<br />
prevention of smut on etched AISI 300 stainless steels”, CIRP Annals –<br />
Manufacturing Technology, 54 (1), pp. 187-190.<br />
Allen, P. M. and Strathern, M. (2005). “Models, knowledge creation and their limits”,<br />
Futures, 37 (7), pp. 729-744.<br />
Allen, P. M. and Torrens, P.M. (2005). “Knowledge and complexity”, Futures, 37 (7),<br />
pp. 581-584.<br />
Angelidis, N., Khemiri, N. and Irving, P. E. (2005). “Experimental and finite element<br />
study of the electrical potential technique for damage detection in CFRP laminates”,<br />
Smart Materials and Structures, 14 (1), pp. 147-154.<br />
Aziz, H., Gao, J., Maropoulos, P. and Cheung, W. M. (2005). “Open standard, open<br />
source and peer-to-peer tools and methods for collaborative product development”,<br />
Computers in Industry, 56 (3), pp. 260-271.<br />
Baines, T.S., Asch, R., Hadfield, L., Mason, J. P., Fletcher, S. and Kay, J. M. (2005).<br />
“Towards a theoretical framework for human performance modelling within<br />
manufacturing systems design”, Simulation Modelling Practice and Theory, 13 (6),<br />
pp. 486-504.<br />
Baines, T. S., Kay, G., Adesola, S. and Higson, M. (2005). “Strategic positioning: an<br />
integrated decision process for manufacturers”, International Journal of Operations<br />
and Production Management, 25 (2), pp. 180-201.<br />
Baldwin, J. S., Allen, P. M., Winder, B. and Ridgway, K. (2005). “Modelling<br />
manufacturing evolution: thoughts on sustainable industrial development”, Journal of<br />
Cleaner Production, 13(9), pp. 887-902.<br />
Bennett, M. J., Nicholls, J. R., Simms, M. J., Naumenko, D., Quadakkers, W. J.,<br />
Kochubey, V., Fordham, R., Bachorczyk, R., Goossens, D., Hattendorf, H., Smith, A.<br />
B. and Britton, D. (2005). “Lifetime extension of FeCrAIRE alloys in air: Potential<br />
roles of an enhanced Al-reservoir and surface pretreatment”, Materials and<br />
Corrosion, 56 (12), pp. 854-866.<br />
Chehura, E., Skordos, A. A., Ye, C. C., James, S. W. Partridge, I. K. and Tatam, R.<br />
P. (2005). “Strain development in curing epoxy resin and glass fibre/epoxy<br />
composites monitored by fibre Bragg grating sensors in birefringent optical fibre”,<br />
Smart Materials and Structures, 14 (2), pp. 354-362.<br />
Daniel, E. and White, A. (2005). “The future of inter-organisational system linkages:<br />
Findings of an international Delphi study European Journal of Information Systems,<br />
14, pp. 188-203.<br />
Ford, H. D., Beddows, R., Casaubieilh, P. and Tatam, R. P. (2005). “Comparative<br />
signal-to-noise analysis of fibre-optic based optical coherence tomography systems”,<br />
Journal of Modern Optics, 52 (14), pp. 1965-1979.<br />
Groves, R. M., Fu, S., James, S. W. and Tatam, R. P. (2005). “Single-axis combined<br />
shearography and digital speckle photography instrument for full surface strain<br />
characterization”. Optical Engineering, 44, (2), article number 025602.<br />
24
Huang, Y. P., Fu, S. and Thompson, C. (2005). “Stereovision-based object<br />
segmentation for automotive applications”, EURASIP Journal on Applied Signal<br />
Processing, 2005, (14), pp. 2322-2329.<br />
Ishaq, I. M., Quintela, A., James, S. W., Ashwell, G. J., Lopez-Higuera, J. M. and<br />
Tatam, R. P. (2005). “Modification of the refractive index response of long period<br />
gratings using thin film overlays”, Sensors and Actuators B – Chemical, 107(2), pp.<br />
738-741.<br />
James, S. W., Ishaq, I., Ashwell, G. J. and Tatam, R. P. (2005). “Cascaded longperiod<br />
gratings with nanostructured coatings”, Optics Letters, 30 (17), pp. 2197-2199.<br />
Kamiya, A., Ovaska, S. J., Roy, R. and Kobayashi, S. (2005). “Fusion of soft<br />
computing and hard computing for large-scale plants: a general model”, Applied Soft<br />
Computing”, 5 (3), pp. 265-279.<br />
Kazilas, M. C. and Partridge, I. K. (2005). “Exploring equivalence of information from<br />
dielectric and calorimetric measurements of thermoset cure-a model for the<br />
relationship between curing temperature, degree of cure and electrical impedance”,<br />
Polymer, 46 (16), pp. 5868-5878.<br />
Kazilas, M. C., Skordos, A. A. and Partridge, I. K. (2005). “Parameter estimation in<br />
equivalent circuit analysis of dielectric cure monitoring signals using genetic<br />
algorithms”, Inverse Problems in Science and Engineering, 13 (2), pp. 157-176.<br />
Minarro-Viseras, E., Baines, T. and Sweeney, M. (2005). “Key success factors when<br />
implementing strategic manufacturing initiatives”, International Journal of Operations<br />
and Production Management, 25 (2), pp. 151-179.<br />
Oduguwa, V., Tiwari, A. and Roy, R. (2005). “Evolutionary computing in<br />
manufacturing industry: an overview of recent applications”, Applied Soft Computing,<br />
5 (3), pp. 281-299.<br />
Partridge, I.K. and Cartie, D. D. R. (2005). “Delamination resistant laminates by Z-<br />
Fiber (R) pinning: Part I - manufacture and fracture performance”, Composites Part A<br />
– Applied Science and Manufacturing, 36 (1), pp. 55-64.<br />
Philpott, E., Hamblin, D. J., Baines, T. S. and Kay, G. (2005). “The use of models and<br />
methods for strategic planning: An holistic view of strategy”, International<br />
Transactions in Operations Research, 11 (2), pp. 203-216.<br />
Rao, J., Cruz, R., Lawson, K. J. and Nicholls, J. R. (2005). “Sputtered DLC-TiB2<br />
multilayer films for tribological applications”, Diamond and Related Materials, 14 (11-<br />
12), pp. 1805-1809.<br />
Rao, J., Lawson, K. J. and Nicholls, J. R. (2005). “The characterisation of e-beam<br />
evaporated and magnetron sputtered carbon films fabricated for atomic oxygen<br />
sensors”, Surface and Coatings Technology, 197 (2-3), pp. 154-160.<br />
Rose-Anderssen, C., Allen, P. M., Tsinopoulos, C. and McCarthy, I. (2005).<br />
“Innovation in manufacturing as an evolutionary complex system”, Technovation, 25<br />
(10), pp. 1093-1105.<br />
25
Roy, R., Colmer, S. and Griggs, T. (2005). “Estimating the cost of a new technology<br />
intensive automotive product: A case study approach”, International Journal of<br />
Production Economics, 97 (2), pp. 210-226.<br />
Roy, R., Kerr, C. I. V., Sackett, P. J. and Corbett, J. (2005). “Design requirements<br />
management using an ontological framework”, CIRP Annals – Manufacturing<br />
Technology, 54 (1), pp. 109-11.2<br />
Smith, D. J. and Tranfield, D. (2005). “Talented suppliers? Strategic change and<br />
innovation in the UK aerospace industry”, R & D Management, 35 (1), pp. 37-49.<br />
Stephenson, D. J. (2005). “Trends in fluid application strategy for grinding<br />
processes”, Advanced in Abrasive Technology VIII, Key Engineering Materials, 291-<br />
292, pp. 245-250.<br />
Storey, J., Emberson, C., Harrison, A. and Godsell, J. (2005). “Supply chain<br />
management: theory, practice and future challenges”, International Journal of<br />
Operations and Production Management, 26 (7), pp. 754-774.<br />
Tan, C. K., Irving, P. and Mba, D. (2005). “Diagnostics and prognostics with acoustic<br />
emission, vibration and spectrometric oil analysis for spur gears - a comparative<br />
study”, Insight, 47 (8), pp. 478-480.<br />
Tatlock, G. J., Al-Badairy, H., Bennett, M. J., Newton, R., Nicholls, J. R. and Galerie,<br />
A. (2005). “Air oxidation of commercial FeCrAlRE alloy foils between 800 and 950<br />
degrees C”, Materials Science and Technology, 21 (8), pp. 893-900.<br />
Tranfield, D., Rowe, A., Smart, P. K., Levene, R., Deasley, P. and Corley, J. (2005).<br />
“Coordinating for service delivery in public-private partnership and private finance<br />
initiative construction projects: early findings from an exploratory study”, Proceedings<br />
of the Institution of Mechanical Engineers Part B – Journal of Engineering<br />
Manufacture, 219 (1), pp. 165-175.<br />
Turnbul, J. and Thompson, C. P. (2005). “Transient averaging to combine large eddy<br />
simulation with Reynolds averaged Navier-Stokes simulations”, Computers and<br />
Chemical Engineering, 29 (2), pp. 379-392.<br />
Ward, J., Hemingway, C. and Daniel, E. (2005). “A framework for addressing the<br />
organisational issues of enterprise systems implementation”, Journal of Strategic<br />
Information Systems, 14 (2), pp. 97-119.<br />
Wellman, R. G., Deakin, M. J. and Nicholls, J. R. (2005). “The effect of TBC<br />
morphology and aging on the erosion rate of EB-PVD TBCs”, Tribology International,<br />
38 (9), pp. 798-804.<br />
Wellman, R. G. and Nicholls, J. R. (2005). “The effect of TBC morphology on the<br />
erosion rate of EB PVD TBCs”, Wear, 258 (1-4), pp. 349-356.<br />
Ye, C. C. and Tatam, R. P. (2005). “Ultrasonic sensing using Yb3 + /Er3 + -doped<br />
distributed feedback fibre grating lasers”, Smart Materials and Structures, 14 (1), pp.<br />
170-176.<br />
26
Journal <strong>Publications</strong> 2004<br />
Allen, D. M. and Almond, H. J. A. (2004). “Characterisation of aqueous ferric chloride<br />
etchants used in industrial photochemical machining”, Journal of Materials<br />
Processing Technology, 149 (1-3), pp. 238-245.<br />
Allen, D.M. (2004). “Photochemical machining: from 'manufacturing's best kept<br />
secret' to a $6 billion per annum, rapid manufacturing process”, CIRP Annals –<br />
Manufacturing Technology, 53 (2), pp. 559-572.<br />
Angelidis, N., Wei, C. Y. and Irving, P. E. (2004). “The electrical resistance response<br />
of continuous carbon fibre composite laminates to mechanical strain”, Composites<br />
Part A – Applied Science and Manufacturing, 35 (10), pp. 1135-1147.<br />
Aziz, H., Gao, J.X., Maropoulos, P.G. and Cheung, W.M. (2004). “Open standard,<br />
open source and peer-to-peer tools and methods for collaborative product<br />
development”, Computers in Industry, 2004, 56 (3), pp. 260-127.<br />
Bacos, M. P., Josso, P., Vialas, N., Poquillon, D., Pieraggi, B., Monceau, D., Nicholls,<br />
J. R., Simms, N., Encinas-Oropesa, A., Ericsson, T. and Stekovic, S. (2004).<br />
ALLBATROS advanced long life blade turbine coating systems”, Applied Thermal<br />
Engineering, 24 (11-12), pp. 1745-1753.<br />
Baines, T. S. (2004). “An integrated process for forming manufacturing technology<br />
acquisition decisions”, International Journal of Operations and Product Management,<br />
24, pp. 447-467.<br />
Baines, T. S., Mason, S., Siebers, P. O.and Ladbrook, J. (2004). “Humans: the<br />
missing link in manufacturing simulation?”, Simulation Modelling Practice and<br />
Theory, 12, pp. 515-526.<br />
Barnes, C. J., Jared, G. E. M. and Swift, K. G.(2004). “Decision support for sequence<br />
generation in an assembly oriented design environment”, Robotics and Computer-<br />
Integrated Manufacturing, 20 (4), pp. 289-300.<br />
Bennett, M. J., Newton, R., Nicholls, J. R., Al-Badairy, H. and Tatlock, G. J. (2004).<br />
“The oxidation behaviour of the commercial FeCrA1RE alloys aluchrom YHf and<br />
Kanthal AF foils in air at 800 degrees-950 degrees C”, High Temperature Corrosion<br />
and Protection of Materials 6, Part 1 and 2, Materials Science Forum, 461-464, pp.<br />
463-472.<br />
Bucknall, C. B. and Altstadt, V. (2004). “Blends containing core-shell impact<br />
modifiers. Part 4 - Fatigue crack growth behaviour”, Plastics, Rubber and<br />
Composites, 33 (6), pp. 234-241.<br />
Bucknall, C. B. (2004). “Blends containing core-shell impact modifiers. Part 5 -<br />
Ductile-brittle transition temperatures in impact and slow bending”, Plastics, Rubber<br />
and Composites, 33 (6), pp. 242-248.<br />
Bucknall, C. B. and Soares, V. L. P. (2004). “Cavitation of rubber particles in highimpact<br />
polystyrene: Effects of crosslinking by gamma-irradiation”, Journal of Polymer<br />
Science Part B – Polymer Physics, 42 (11), pp. 2168-2180.<br />
27
Burr, M. and Denyer, D. (2004). “Co-producing management knowledge: the<br />
Mouchel Parkman <strong>Cranfield</strong> Case Study”, Journal of Advancing Information and<br />
Management Studies, 1, pp. 33-41.<br />
Byrne, G. D., James, S. W. and Tatam, R. P. (2004). “A single-headed fibre optic<br />
laser Doppler anemometer probe for the measurement of flow angles”, Measurement<br />
Science and Technology, 15 (1), pp. 1-8.<br />
Cai, G. Q., Zhao, H. H., Feng, B. F. and Jin, T. (2004). “Thermal models of high<br />
efficiency deep grinding and grinding temperature”. Advances in Grinding and<br />
Abrasive Processes, Key Engineering Materials, 259 (2), pp. 170-173.<br />
Charrett, T. O. H., Ford, H. D., Nobes, D. S. and Tatam, R. P. (2004). “Twofrequency<br />
planar Doppler velocimetry (2 nu-PDV)”, Review of Scientific Instruments,<br />
75 (11), pp. 4487-4496.<br />
Chehura, E., Ye, C. C., Staines, S. E., James, S. W. and Tatam, R. P. (2004).<br />
“Characterization of the response of fibre Bragg gratings fabricated in stress and<br />
geometrically induced high birefringence fibres to temperature and transverse load”,<br />
Smart Materials and Structures, 13 (4), pp. 888-895.<br />
Comley, P., Stephenson, D. J. and Corbett, J. (2004). “High efficiency deep grinding<br />
and the effect on surface integrity”, Advanced in Abrasive Technology VI, Key<br />
Engineering Materials, 257-258, pp. 207-212.<br />
Daniel, E. M., Hoxmeier, J., White, A. and Smart, A. A. (2004). “Framework for the<br />
Sustainability of E-Marketplaces”, Business Process Management Journal 10 (3), pp.<br />
277-289.<br />
Daniel, E. M., White, A. and Ward, J. (2004). “Exploring the Role of Third Parties in<br />
Inter-Organisational Web Service Adoption”, Journal of Logistics Information<br />
Management, 17 (5), pp. 351-360.<br />
Denyer, D. and Neely, A. (2004). “Introduction to special issue: Innovation and<br />
productivity performance in the UK”, International Journal of Management Reviews,<br />
38873, pp. 131-135.<br />
Dunn, S., Impey, S., Kimpton, C., Parsons, S. A., Doyle, J. and Jefferson, B. (2004).<br />
“Surface diagnostics for scale analysis2, Water Science and Technology, 49 (2), pp.<br />
183-190.<br />
Edwards, T., Battisti, G. and Neely, A. (2004. “Value creation and the UK economy: a<br />
review of strategic options”, International Journal of Management Reviews, 38873,<br />
pp. 191-213.<br />
Fu, S. and Thompson, C. (2004). “Intelligent vision systems for automotive<br />
applications”, Computing and Control Engineering Journal, 15 (4), pp. 20-24.<br />
Groves, R. M., James, S. W. and Tatam, R. P. (2004). “Shape and slope<br />
measurement by source displacement in shearography”, Optics and Lasers in<br />
Engineering, 41 (4), pp. 621-634.<br />
Kazilas, M. C. and Partridge, I. K. (2004). “Temperature modulated dielectric analysis<br />
(TMDA): a new experimental technique for the separation of temperature and<br />
28
eaction effects in dielectric cure monitoring signals”, Measurement Science and<br />
Technology, 15 (5), L1-L4.<br />
Jin, T. and Stephenson, D. J. (2004). “Three dimensional finite element simulation of<br />
transient heat transfer in high efficiency deep grinding”, CIRP Annals –<br />
Manufacturing Technology, 53 (1), pp. 259-262.<br />
Leseure, M. J., Bauer, J., Birdi, K., Neely, A. and Denyer, D. (2004). “Adoption of<br />
promising practices: a systematic review of the evidence”, International Journal of<br />
Management Reviews, 38873, pp. 169-190.<br />
Mena, C., Aspinall, R., Bernon, M., Templar, S. and Whicker, L. (2004). “Gaining<br />
visibility of supply-chain costs: the supply chain time and cost mapping toolkit keeps<br />
cost visible”, Logistics and Transport Focus, 6 (7), pp. 54-57.<br />
Nobes, D. S., Ford, H. D. and Tatam, R. P. (2004). “Instantaneous, three-component<br />
planar Doppler velocimetry using imaging fibre bundles”, Experiments in Fluids, 36<br />
(1), pp. 3-10.<br />
Nobes, D. S., Wieneke, B. and Tatam, R. P. (2004). “Determination of view vectors<br />
from image warping mapping functions”, Optical Engineering, 43 (2), pp. 407-414.<br />
Oduguwa, V., Tiwari, A. and Roy, R. (2004). “Sequential process optimisation using<br />
Genetic Algorithms” Lecture Notes in Computer Science, 3242, pp. 782-791.<br />
O'Dwyer, M. J., Ye, C. C., James, S. W. and Tatam, R. P. (2004). “Thermal<br />
dependence of the strain response of optical fibre Bragg gratings”, Measurement<br />
Science and Technology, 15 (8), pp. 1607-1613.<br />
Pickett, A. K., Pyttel, T., Payen, F., Lauro, F., Petrinic, N., Werner, H. and Christlein,<br />
J. (2004). “Failure prediction for advanced crashworthiness of transportation<br />
vehicles”, International Journal of Impact Engineering, 30 (7), pp. 853-872.<br />
Pittaway, L., Robertson, M., Munir, K., Denyer, D. and Neely, A. (2004). “Networking<br />
and innovation: a systematic review of the evidence”, International Journal of<br />
Management Reviews, 38873, pp. 137-168.<br />
Pollard, S. J. T., Strutt, J. E., MacGillivray, B. H., Hamilton, P. D. and Hrudey, S. E.<br />
(2004). “Risk analysis and management in the water utility sector - A review of<br />
drivers, tools and techniques”, Process Safety and Environmental Protection, 82<br />
(B6), pp. 453-462.<br />
Rao, J., Cruz, R., Lawson, K. J. and Nicholls, J. R. (2004). “Carbon and titanium<br />
diboride multilayer coatings”, Diamond and Related Materials, 13 (11-12), pp. 2221-<br />
2225.<br />
Roy, R., Adesola, B. A. and Thornton, S. (2004). “Development of a knowledge<br />
model for managing schedule disturbance in steel-making”, International Journal of<br />
Production Research, 42 (18), pp. 3975-3994.<br />
Roy, R., Allen, D. and Zamora, O. (2004). “Cost of photochemical machining”,<br />
Journal of Materials Processing Technology, 149 (1-3), pp. 460-465.<br />
29
Skipworth, H. and Harrison, A. (2004). “Implications of form postponement to<br />
manufacturing: a case study”, International Journal of Production Research, 42 (10),<br />
pp. 2063-2081.<br />
Skordos, A. A. and Partridge, I. K. (2004). “Determination of the degree of cure under<br />
dynamic and isothermal curing conditions with electrical impedence spectroscopy”<br />
Journal of Polymer Science Part B – Polymer Physics, 42 (1), pp. 146-154.<br />
Skordos, A. A. and Partridge, I. K. (2004). “Inverse heat transfer for optimization and<br />
on-line thermal properties estimation in composites curing”, Inverse Problems in<br />
Engineering, 12 (2), pp. 157-172.<br />
Simms, N. J., Encinas-Oropesa, A. and Nicholls, J. R. (2004). “Development of hot<br />
corrosion on coated single crystal superalloys”, High Temperature Corrosion and<br />
Protection of Materials 6, Part 1 and 2, Proceedings Materials Science Forum, 461-<br />
464, pp. 941-948.<br />
Stanev, P. T., Wardle, F. and Corbett, J. (2004). “Investigation of grooved hybrid air<br />
bearing performance”, Proceedings of the Institution of Mechanical Engineers Part K<br />
– Journal of Multi-Body Dynamics, 218 (2), pp. 95-106.<br />
Shore, P., Billing, O. and Puhasmagi, V. (2004). “A standard grinding wheel<br />
assessment method to support a sophisticated grinding knowledge based system”,<br />
Advances in Abrasive Technology VI, Key Engineering Materials, 257-258, pp. 285-<br />
290.<br />
Tranfield, D. R. and Denyer, D.(2004). “Linking Theory to Practice: A ‘grand<br />
challenge’ for management research in the 21st century?”, Organisation<br />
Management Journal, Linking Theory and Practice1(1), pp. 10-14.<br />
Tranfield, D. R., Denyer, D. and Burr, M. (2004). “The strategic management of long<br />
term assets SMoLTA: an unexpected lever for performance improvement”,<br />
Management Decision, 42 (2), pp. 277-291.<br />
Wang, R. K., Tatam, R. P. and Somekh, M. (2004). “Optical biosensing – Preface”,<br />
Biosensors and Bioelectronics, 20(3), pp. 413-413.<br />
Wellman, R. G. Nicholls, J. R. (2004). “A Monte Carlo model for predicting the<br />
erosion rate of EB PVD TBCs”, Wear, 256 (9-10), pp. 889-899.<br />
Wellman, R. G. and Nicholls, J. R. (2004). “High temperature erosion-oxidation<br />
mechanisms, maps and models”, Wear, 256 (9-10), pp. 907-917.<br />
Wellman, R. G., Dyer, A. and Nicholls, J. R. (2004). “Nano and micro indentation<br />
studies of bulk zirconia and EB PVD TBCs”, Surface and Coatings Technology, 176<br />
(2), pp. 253-260.<br />
Wellman, R. G. and Nicholls, J. R.(2004). “On the effect of ageing on the erosion of<br />
EB-PVD TBCs”, Surface and Coatings Technology, 177, pp. 80-88.<br />
Wellman, R. G., Tourmente, H., Impey, S. and Nicholls, J. R. (2004). “Nano and<br />
microhardness testing of aged EB PVD TBCs”, Surface and Coatings Technology,<br />
188-89, pp. 79-84.<br />
30
White, A., Daniel, E. M. and Wilkinson, M. (2004). “The Impact of E-Marketplaces on<br />
Dyadic Buyer-Supplier Relationships: Evidence from the Healthcare Sector”, Journal<br />
of Logistics Information Management, 3, pp. 127-140.<br />
Wilcox, M. (2004). “Prediction and pragmatism in Shewharts theory of statistical<br />
control. Management Decision”, Journal of Management History, 42 (1), pp. 152-165.<br />
Zhao, Q. L., Stephenson, D., Corbett, J., Hedge, J., Wang, J.H. and Liang,<br />
Y.C.(2004). “Single grit diamond grinding of Spectrosil 2000 glass on Tetraform 'C'”,<br />
Advances in Abrasive Technology VI, Key Engineering Materials, 257-258, pp. 107-<br />
112.<br />
31
Journal <strong>Publications</strong> 2003<br />
Allen, D. M. (2003). “The state of the art of photochemical machining at the start of<br />
the twenty-first century”, Proceedings of the Institution of Mechanical Engineers Part<br />
B – Journal of Engineering Manufacture, 217 (5), pp. 643-650.<br />
Baines, T. S., Oyarbide, A., Kay, J. M. and Ladbrook, J. A. (2003). “Manufacturing<br />
Systems Modelling using System Dynamics: forming a dedicated modelling tool”,<br />
Journal of Advanced Manufacturing Systems, 2 (1), pp. 71-87.<br />
Barnes, C. J., Jared, G. E. M. and Swift, K. G. (2003). “A pragmatic approach to<br />
interactive assembly sequence evaluation”, Proceedings of the Institution of<br />
Mechanical Engineers Part B - Journal of Engineering Manufacture, 217 (4), pp. 541-<br />
550.<br />
Bennett, M.J., Newton, R. and Nicholls, J.R. (20003). “The behaviour of commercial<br />
FeCrAIRE alloys in nitrogen-oxygen - water vapour bioxidant environments”,<br />
Materials at High Temperatures, 20 (3), pp. 347-356.<br />
Bowland, N. W., Gao, J. X. and Sharma, R. A. (2003). “PDM- and CAD-integrated<br />
assembly modelling environment for manufacturing planning”, Journal of Materials<br />
Processing Technology, 138, pp. 82-88.<br />
Bussu, G. and Irving, P.E. (2003). “The role of residual stress and heat affected zone<br />
properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium<br />
joints”, International Journal of Fatigue, 25 (1), pp. 77-88.<br />
Challis, R. E., Unwin, M. E., Chadwick, D. L., Freemantle, R. J., Partridge, I. K., Dare,<br />
D. J. and Karkanas, P. I. (2003). “Following network formation in an epoxy/amine<br />
system by ultrasound, dielectric, and nuclear magnetic resonance measurements: A<br />
comparative study”, Journal of Applied Polymer Science, 88 (7), pp. 665-1675.<br />
Chehura, E., Ye, C. C. and Tatam, R. P. (2003). “In-line laser Doppler velocimeter<br />
using fibre-optic Bragg grating interferometric filters”, Measurement Science and<br />
Technology, 2003, 14 (6), pp. 724-735.<br />
Daniel, E. M., Hoxmeier, J., White, A. and Smart, A. (2003). “A Framework for the<br />
Sustainability of E-Marketplaces”, Business Process Management Journal, 10 (3),<br />
pp. 277-289.<br />
Frost, M., Solanki, D. and Mills, A. (2003). “Resin film infusion process of carbon fibre<br />
composite automotive body panels”, SAMPE Journal, 39 (4), pp. 44-49.<br />
Gao, J. X., Aziz, H., Maropoulos, P. G. and Cheung, W. M. (2003). “Application of<br />
product data management technologies for enterprise integration” International<br />
Journal of Computer Integrated Manufacturing, 16, pp. 491-500.<br />
Garcia-Fornieles, J. M., Fan, I. S., Perez, A., Wainwright, C. and Sehdev, K. “A work<br />
breakdown structure that integrates different views in aircraft modification projects”,<br />
Concurrent Engineering-Research and Applications, 11 (1), pp. 47-54.<br />
Garcia-Miquel, J. L., Zhang, Q., Allen, S. J., Rougier, A., Blyr, A., Davies, H. O.,<br />
Jones, A. C., Leedham, T. J., Williams, P. A. and Impey, S.A. (2003). “Nickel oxide<br />
sol-gel films from nickel diacetate for electrochromic applications”, Thin Solid Films,<br />
424 (2), pp. 165-170.<br />
32
Gelman, L., Petrunin, I., Sanderson, M. and Thompson, C. (2003). “Vibro-acoustic<br />
deposit detection in pipelines”, Insight, 45 (7), pp. 466.<br />
Gelman, L., Sanderson, M. and Thompson, C. (2003). “Signal recognition: Fourier<br />
transform vs. cosine transform”, Pattern Recognition Letters, 24 (15), pp. 2823-2827.<br />
Gelman, L., Sanderson, M. and Thompson, C. (2003). “Signal recognition: Fourier<br />
transform vs. Hartley transform”, Pattern Recognition, 36 (12), pp. 2849-2853.<br />
Groves, R. M., James, S. W. and Tatam, R. P. (2003). “Pipe weld investigation using<br />
shearography”, Strain, 39 (3), pp. 101-105.<br />
Hall, P. L. and Strutt, J. E. (2003). “Probabilistic physics-of-failure models for<br />
component reliabilities using Monte Carlo simulation and Weibull analysis: a<br />
parametric study”, Reliability Engineering and Systems Safety, 80 (3), pp. 233-242.<br />
James, S. W., Tatam, R. P., Twin, A., Bateman, R. and Noonan, P. (2003).<br />
“Cryogenic temperature response of fibre optic long period gratings”, Measurement<br />
Science and Technology, 14 (8), pp. 1409-1411.<br />
James, S. W. and Tatam, R. P. (2003). “Optical fibre long-period grating sensors:<br />
Characteristics and application”, Measurement Science and Technology, 14 (5), R49-<br />
R61.<br />
Jin, T., Stephenson, D. J. and Rowe, W. B. (2003). “Estimation of the convection<br />
heat transfer coefficient of coolant within the grinding zone”, Proceedings of the<br />
Institution of Mechanical Engineers Part B – Journal of Engineering Manufacture, 217<br />
(3), pp. 397-407.<br />
Jin, T. and Stephenson, D. J. (2003). “Investigation of the heat partitioning in high<br />
efficiency deep grinding”, International Journal of Machine Tools and Manufacture,<br />
43 (11), pp. 1129-1134.<br />
Kennerley, M. and Neely, A. (2003). “Measuring performance in a changing business<br />
environment”, International Journal of Operations and Production Management, 23<br />
(2), pp. 213-229.<br />
Louaked, M., Hanich, L. and Thompson, C.P. (2003). “Well-posedness of<br />
incompressible models of two- and three-phase flow”, IMA Journal of Applied<br />
Mathematics, 68 (6), pp. 595-620.<br />
Nicholls, J. R., Bennett, M. J. and Newton, R. (2003). “A life prediction model for the<br />
chemical failure of FeCrAIRE alloys: preliminary assessment of model extension to<br />
lower temperatures”, Materials at High Temperatures, 20 (3), pp. 429-438.<br />
Nicholls, J. R., Newton, R., Simms, N. J. and Norton, J. F. (2003). “Modelling the<br />
oxidation of FeCrAl-RE ODS alloys in simulated natural gas combustion<br />
environments”, Materials at High Temperatures, 20 (2), pp. 93-108.<br />
Nicholls, J. R., Wellman, R. G. and Deakin, M. J. (2003). “Erosion of thermal barrier<br />
coatings”, Materials at High Temperatures, 20 (2), pp. 207-218.<br />
Niewolak, L., Lawson, K., Rossbach, R., Wessel, E., Shemet, V., Nicholls, J. R.,<br />
Singheiser, L. and Quadakkers, W. J. (2003). “Transient oxidation of alumina forming<br />
33
Ti-Al-Ag-based alloys and coatings studied by SEM, AFM, XPS and LRS”, Materials<br />
at High Temperatures, 20 (4), pp. 631-637.<br />
Petzing, J. and James, S. (2003). Editorial, Strain, 39 (3), pp. 93-93.<br />
Prince, J. and Kay, J. M. (2003). “Combining lean and agile characteristics: Creation<br />
of virtual groups by enhanced production flow analysis”, International Journal of<br />
Production Economics, 85 (3), pp. 305-318.<br />
Ranaweera, C. and Neely, A. (2003). “Some moderating effects on the service<br />
quality-customer retention link”, International Journal of Operations and Production<br />
Management, 23 (2), pp. 230-248.<br />
Rodriguez-Toro, C. A., Tate, S. J., Jared, G. E.M. and Swift, K. G. (2003).<br />
“Complexity metrics for design (simplicity plus simplicity equals complexity)”,<br />
Proceedings of the Institution of Mechanical Engineers Part B – Journal of<br />
Engineering Manufacture, 217 (5), pp. 721-725.<br />
Roy, R., Tiwari, A. and Corbett, J. (2003). “Designing a turbine blade cooling system<br />
using a generalised regression genetic algorithm”, CIRP Annals – Manufacturing<br />
Technology, 52 (1), pp. 415-418.<br />
Samaras, Z. I. and Partridge, I. K. (2003). “Effects of styrene evaporation on the cure<br />
kinetics behaviour of a vinylester resin system suitable for composite pultrusion”,<br />
Polymers and Polymer Composites, 11 (8), 623-632<br />
Silva, M. F. V., Hancock, P. and Nicholls, J. R. (2003). “An improved three-point<br />
bending method by nanoindentation”, Surface and Coatings Technology, 169, pp.<br />
748-752.<br />
Simms, N .J., Newton, R., Norton, J. F., Encinas-Oropesa, A., Oakey, J. E., Nicholls,<br />
J. R. and Wiber, J. (2003). “Degradation of Fe-Cr-Al-RE and Ni-Cr-Al-RE foils in air<br />
and combustion gas atmospheres”, Materials at High Temperatures, 20 (3), pp. 439-<br />
451.<br />
Smart, P. K., Tranfield, D., Deasley, P., Levene, R., Rowe, A. and Corley, J. (2003).<br />
“Integrating 'lean' and 'high reliability' thinking”, Proceedings of the Institution of<br />
Mechanical Engineers B – Journal of Engineering Manufacture, 217 (5), pp. 733-739.<br />
Tate, S. J. and Jared, G. E. M. (2003). “Recognising symmetry in solid models”,<br />
Computer Aided Design, 35 (7), pp. 673-692.<br />
Tranfield, D. R., Denyer, D., Marcos, J. and Burr, M. (2003). “Co-producing<br />
Management Knowledge”, Management Decision, 42 (3-4), pp. 375-386.<br />
Tranfield, D., Denyer, D. and Smart, P. (2003). “Towards a methodology for<br />
developing evidence-informed management knowledge by means of systematic<br />
review”, British Journal of Management, 14 (3), pp. 207-222.<br />
Tranfield, D. R., Young, M., Partington, D., Bessant, J. and Sapsed, J. (2003).<br />
“Knowledge Management routines for Innovation Projects: Developing a Hierarchial<br />
Process Model”, International Journal of Innovation Management, 7 (1), pp. 27-49.<br />
34
Van der Zwan, F. and Bhamra, T. (2003). “Alternative function fulfilment:<br />
incorporating environmental considerations into increased design space”, Journal of<br />
Cleaner Production, 11 (8), pp. 897-903.<br />
Van Der Zwan, F. M. and Bhamra, T. A. (2003). “Services marketing: taking up the<br />
sustainable development challenge”, Journal of Services Marketing, 17 (4), pp. 341-<br />
356.<br />
Warrior, N. A., Pickett, A. K. and Lourenco, N. S. F. (2003). “Mixed-mode<br />
delamination - Experimental and numerical studies”, Strain, 39 (4), pp. 153-159.<br />
White, A., Daniel, E. M. and Wilkinson, M. (2003). “The Impact of E-Marketplaces on<br />
Buyer-Supplier Relationships: Support for the Move to the Middle Hypothesis”,<br />
International Journal of Information Technology and Management, 3 (2-4), pp. 127-<br />
140.<br />
Wilcox, M. and Bourne, M. (2003). “Predicting Performance”, Management Decision,<br />
41 (8), pp. 806-816.<br />
Williams, K., Robertson, N., Haritonov, C. R. and Strutt, J. (2003). “Reliability<br />
capability evaluation and improvement strategies for subsea equipment suppliers”,<br />
Underwater Technology, 25 (4), pp. 165-173.<br />
35
Journal <strong>Publications</strong> 2002<br />
Allen, D., Baston, G., Bradley, A. E., Gorman, T., Haile, A., Hamblett, I., Hatter, J. E.,<br />
Healey, M. J. F., Hodgson, B., Lewin, R., Lovell, K. V., Newton, B., Pitner, W. R.,<br />
Rooney, D. W., Sanders, D., Seddon, K. R., Sims, H. E. and Thied, R. C. (2002). “An<br />
investigation of the radiochemical stability of ionic liquids”, Green Chemistry, 4 (2),<br />
pp. 152-158.<br />
Allen, P., Ramlogan, R. and Randles, S. (2002). “Complex systems and the merger<br />
process”, Technology Analysis and Strategic Management, 14 (3), pp. 315-329.<br />
Allsopp, D. J., Harrison, A. and Sheppard, C. (2002). “A database architecture for<br />
reusable Common KADS agent specification components”, Knowledge-Based<br />
Systems, 15 (38873), pp. 275-283.<br />
Baines, T. S. and Kay, J. M. (2002). “Human performance modelling as an aid in the<br />
process of manufacturing system design: a pilot study”, International Journal of<br />
Production Research, 40 (10), 2321-2334<br />
Bennett, M. J., Nicholls, J .R., Borchardt, G. and Strehl, G. (2002). “Crevice corrosion<br />
of Cr2O3 and Al2O3 forming alloys in mixed nitrogen-oxygen environments”, Materials<br />
at High Temperatures, 19, (3), pp. 117-125.<br />
Bourne, M., Neely, A., Platts, K. and Mills, J. (2002). “The success and failure of<br />
performance measurement initiatives - Perceptions of participating managers”,<br />
International Journal of Operations and Production Management, 22 (11), pp. 1288-<br />
1310.<br />
Burns, A. and Evans, S. (2002). “Empathic Design - a new approach for<br />
understanding and delighting customers”, International Journal of New Product<br />
Development and Innovation Management, 34, pp. 313-327.<br />
Cai, G. Q., Feng, B. F., Jin, T. and Gong, Y.D. (2002). “Study on the friction<br />
coefficient in grinding”, Journal of Materials Processing Technology, 129 (1-3), pp.<br />
25-29.<br />
Cartie, D. D. R. and Irving, P. E. (2002). “Effect of resin and fibre properties on<br />
impact and compression after impact performance of CFRP”, Composites Part A –<br />
Applied Science and Manufacturing, 33 (4), pp. 483-493.<br />
Corbett, J., Morantz, P., Stephenson, D. J. and Read, R. F. (2002). “An advanced<br />
ultraprecision face grinding machine”, International Journal of Advanced<br />
Manufacturing Technology, 20 (9), pp. 639-648.<br />
Gao, J. X. and Bowland, N. W. (2002). “A product data management integrated<br />
product configuration and assembly process planning environment”, Proceedings of<br />
the Institution of Mechanical Engineers Part B – Journal of Engineering Manufacture,<br />
216 (3), pp. 407-418.<br />
Gao, J. X., Bowland, N. W. and Sharma, R. (2002). “A product-configuration-driven<br />
system for assembly planning within a product data management environment”,<br />
International Journal of Production Research, 409, pp. 2041-2051.<br />
36
Hancock, P., da Silva, M. F. V. and Nicholls, J. R. (2002). “Measurement of<br />
mechanical properties of multilayer coatings by nanoindentation”, Materials Science<br />
and Technology, 18 (8), pp. 827-830.<br />
Harrison, A. and New, C. (2002). “The role of coherent supply chain strategy and<br />
performance management in achieving competitive advantage: an international<br />
survey”, Journal of the Operational Research Society, 53 (3), pp. 263-271.<br />
James, S.W., Tatam, R. P., Twin, A., Morgan, M. and Noonan, P. (2002). “Strain<br />
response of fibre Bragg grating sensors at cryogenic temperatures”, Measurement<br />
Science and Technology, 13 (10), pp. 1535-1539.<br />
Jin, T., Rowe, W. B. and McCormack, D. (2002). “Temperatures in deep grinding of<br />
finite workpieces”, International Journal of Machine Tools and Manufacture, 42 (1),<br />
pp. 53-59.<br />
Jin, T., Stephenson, D. J. and Corbett, J. (2002). “Burn threshold of high-carbon steel<br />
in high-efficiency deep grinding”, Proceedings of the Institution of Mechanical<br />
Engineers Part B – Journal of Engineering Manufacture, 216 (3), pp. 357-364.<br />
Kennerley, M. and Neely, A. (2002). “A framework of the factors affecting the<br />
evolution of performance measurement systems”, International Journal of Operations<br />
and Production Management, 22 (11), pp. 1222-1245.<br />
Khaliq, S., James, S. W. and Tatam, R. P. (2002). “Enhanced sensitivity fibre optic<br />
long period grating temperature sensor” Measurement Science and Technology, 13<br />
(5), pp. 792-795.<br />
Mena, C., Whicker, L .,Templar, S. and Bernon, M. (2002). “Costing the supply<br />
chain”, Manufacturing Engineering, 81 (5), pp. 225-228.<br />
Mills, A. (2002). “Carbon car comes of age”, Materials World, 10 (9), pp. 20-22.<br />
Myers, T. G., Charpin, J. P .F. and Thompson, C.P. (2002). “Slowly accreting ice due<br />
to supercooled water impacting on a cold surface” Physics of Fluids, 14 (1), pp. 240-<br />
256.<br />
Nicholls, J. R., Lawson, K. J., Johnstone, A. and Rickerby, D. S. (2002). “Methods to<br />
reduce the thermal conductivity of EB-PVD TBCs”, Surface and Coatings<br />
Technology, 2002, 151, pp. 383-391.<br />
Nicholls, J. R., Simms, N. J., Chan, W. and Evans, H. E. (2002). “Smart overlay<br />
coatings - concept and practice”, Surface and Coatings Technology, 149 (2-3), pp.<br />
236-244.<br />
Payne, K. H., Deasley, P. J., Morris, A. J., Evans, S., Fielding, J. P., Guenov, M. and<br />
Syamsudin, H. (2002). “A distributed process for the aerospace industry”, Journal of<br />
Engineering Design, 133, pp. 253-260.<br />
Rees, N. D., James, S. W., Tatam, R. P. and Ashwell, G. J. (2002). “Optical fiber<br />
long-period gratings with Langmuir-Blodgett thin-film overlays”, Optics Letters, 27 (9),<br />
pp. 686- 688.<br />
37
Reilly, S. P., James, S. W. and Tatam, R. P. (2002). “Tunable and switchable dual<br />
wavelength lasers using optical fibre Bragg grating external cavities” Electronics<br />
Letters, 38 (18), pp. 1033-1034.<br />
Rougier, A., Blyr, A., Garcia, J., Zhang, Q. and Impey, S.A. (2002). “Electrochromic<br />
W-M-O (M = V, Nb) sol-gel thin films: a way to neutral colour”, Solar Energy Materials<br />
and Solar Cells, 71 (3), pp. 343-357.<br />
Roy, R., Jared, G. and Mussa, R. (2002). “Curve and surface optimization within the<br />
CAD/CAM environment”, Journal of Engineering Design, 132, pp. 121-139.<br />
Sapsed, J., Bessant, J., Partington, D., Tranfield, D. and Young, M. (2002).<br />
“Teamworking and knowledge management: a review of converging themes”,<br />
International Journal of Management Reviews, 4 (1), pp. 71-85.<br />
Sharma, R., Gao, J. X. (2002). “Implementation of STEP Application Protocol 224 in<br />
an automated manufacturing planning system”, Proceedings of the Institution of<br />
Mechanical Engineers Part B – Journal of Engineering Manufacture, 216 (9), pp.<br />
1277-1289.<br />
Sharma, R. and Gao, J. X. (2002). “A progressive design and manufacturing<br />
evaluation system incorporating STEP AP224”, Computers in Industry, 47 (2), pp.<br />
155-167.<br />
Smart, P. K., Brookes, N. J., Lettice, F. E., Backhouse, C. J. and Burns, N. D. (2002).<br />
“A boundary-based view of product development - a feasibility study”, Proceedings of<br />
the Institution of Mechanical Engineers Part B – Journal of Engineering Manufacture,<br />
216 (1), pp. 1-12.<br />
Stephenson, D. J., Jin, T. and Corbett, J. (2002). “High efficiency deep grinding of a<br />
low alloy steel with plated CBN wheels”, CIRP Annals – Manufacturing Technology,<br />
51 (1), pp. 241-244.<br />
Stephenson, D. J., Hedge, J. and Corbett, J. (2002). “Surface finishing of Ni-Cr-B-Si<br />
composite coatings by precision grinding”, International Journal of Machine Tools<br />
and Manufacture, 42 (3), pp. 357-363.<br />
Tranfield, D. and Smith, S. (2002). “Organisation designs for teamworking”,<br />
International Journal of Operations and Production Management, 22, (38873), pp.<br />
471-491.<br />
Wei, C. Y., Ye, C. C., James, S. W., Tatam, R. P.and Irving, P. E. (2002). “The<br />
influence of hydrogen loading and the fabrication process on the mechanical strength<br />
of optical fibre Bragg gratings” Optical Materials, 20 (4), pp. 241-251.<br />
Wei, C. Y., Ye, C. C., James, S. W., Irving, P. E. and Tatam, R. P. (2002). “AFM<br />
observation of surface topography of fibre Bragg gratings fabricated in germaniumboron<br />
codoped fibres and hydrogen-loaded fibres” Optical Materials, 20 (4), pp. 283-<br />
294.<br />
Ye, C. C., Staines, S .E., James, S. W. and Tatam, R. P. (2002. “A polarizationmaintaining<br />
fibre Bragg grating interrogation system for multi-axis strain sensing”,<br />
Measurement Science and Technology, 13 (9), pp. 1446-1449.<br />
38
Zarrelli, M., Skordos, A. A. and Partridge, I. K. (2002). “Investigation of cure induced<br />
shrinkage in unreinforced epoxy resin”, Plastics Rubber and Composites, 31 (9), pp.<br />
377-384.<br />
39
Conference <strong>Publications</strong> 2012<br />
Pozzi, M., Canziani, A. and Zhu, M. (2012). “Experimental characterisation of macro<br />
fibre composites and piezoelectric transducers for strain energy harvesting”, SPIE<br />
Smart Structures/NDE 2012, 11-15 March 2012, San Diego, California, USA.<br />
Pozzi, M., Guo, S. and Zhu, M. (2012). “Harvesting Strain Energy of an Optimised<br />
Composite Aircraft Wing under Gust Loading”, SPIE Smart Structures/NDE 2012, 11<br />
- 15 March 2012, San Diego, California, USA.<br />
Zdebski, D., Stephenson, D.J., Allen, D. and Ratchev, S. (2012). “Prediction of<br />
cutting conditions effects on micro-milling performance”, 7 th International Conference<br />
on Micro Manufacturing, 12-14 March 2012, Illinois, USA.<br />
40
Conference <strong>Publications</strong> 2011<br />
Bastl, M., Johnson, M. and Karatzas, A. (2011). “Servitization of manufacturing; An<br />
event study to examine how public announcements of different types of offerings<br />
affect shareholder value”, 18th Annual EurOMA Conference, 3-6 July 2011,<br />
Cambridge, UK.<br />
Benkhelifa, E., Moniri, M., Tiwari, A. and De Rueda, A.G. (2011). “Evolutionary multiobjective<br />
design optimisation of energy harvesting MEMS: The case of a<br />
Piezoelectric”, IEEE Congress on Evolutionary Computation (CEC-2011), 5-8 June,<br />
New Orleans, USA.<br />
Bianchi, F. (2011). “A cohesive zone model for predicting delamination suppression<br />
in z-pinned laminates”, 8 th Postgraduate Academic Forum, October 2011, Beijing,<br />
China.<br />
Butler, J. (2011). “Delamination control in structural metal-composite joints via Zdirection<br />
pinning”, 6 th International Conference on Fracture of Polymers, Composites<br />
and Adhesives, 11 th – 15 th September 2011, Les Diablerets, Switzerland.<br />
Cakkol, M. and Johnson, M. (2011). “An Empirical Investigation of Business Model<br />
Innovation on Inter-and Intra-Organisational Relationships”, 18th Annual EurOMA<br />
Conference, 3-6 July 2011, Cambridge, UK.<br />
Castelli, M., Jourdain, R., Morantz, P., and Shore P. (2011). “Reactive Atom Plasma<br />
for Rapid Figure Correction of Optical Surfaces”, International Congress for Precision<br />
Machining, 15 September 2011, Liverpool, UK.<br />
Edkins, S., Worthington, E., and Zhu, M., (2011). “Piezoelectric backward coupling<br />
effect on electromechanical performance of cantilever based piezoelectric energy<br />
harvesting devices”, Eurosensors XXV, 4-7 September 2011, Athens, Greece.<br />
Gkekas, K., Alcock, J. and Tiwari, A. (2011). “Service system representation based<br />
on SYSML”, 9 th International Conference on Manufacturing Research (ICMR-2011),<br />
6-8 September, Glasgow, Scotland.<br />
Jourdain, R., Castelli, M., Morantz P., and Shore P. (2011). “Fast 3D Figuring of<br />
Large Optical Surfaces Using Reactive Atom Plasma (RAP) Processing”, EOS<br />
Conference Manufacturing of Optical Components, 23-25 May 2011, Munich,<br />
Germany.<br />
Jourdain, R., Castelli, M., Morantz P., and Shore P. (2011). “Figuring of Large Optical<br />
Surfaces Using Reactive Atom Plasma (RAP) Processing”, International Conference<br />
of the European Society for Precision Engineering and Nanotechnology, 23-27 May<br />
2011, Como, Italy.<br />
Marsic, V., Zhu, M., and Williams, S (2011). “Design and implementation of a<br />
wireless sensor communication system with low power consumption for energy<br />
harvesting technology”, Proceedings of the 19th Telecommunications Forum, 22-24<br />
November 2011, Belgrade, Serbia.<br />
Partridge, I. K. (2011). “Through-the-thickness reinforcement of composites”,<br />
Thermosets 2011, 21-23 September 2011, Berlin, Germany.<br />
41
Partridge, I.K. (2011). “Use of micro-fasteners in localized reinforcement of<br />
composite structures”, SAMPE-JISSE-12, 10 November 2011, Tokyo, Japan.<br />
Pilbeam, C. (2011). “Social Networks for Innovation in Manufacturing SMEs in the<br />
UK”, Decision Science Conference, 19-22 November 2011, Boston, USA.<br />
Romero Rojo, F. J., Roy, R. and Kelly S. (2011). “A Comparative Study Between<br />
Obsolescence Cost Metrics”, Component Obsolescence Group (COG) International<br />
Conference 2011: The Economics of Obsolescence, 28-30 June 2011, York, UK.<br />
Romero Rojo, F. J., Roy, R. and Kelly, S. (2011). “TOMCAT: A Framework to Assess<br />
Obsolescence Management Capability”, DMSMS Conference 2011, 29th Aug–1st<br />
Sept 2011, Hollywood, USA.<br />
Romero Rojo, F. J., Roy, R., Shehab, E., Call, M. and Wardle, P. (2011). “Electronic,<br />
electrical and electromechanical (EEE) obsolescence cost drivers for product<br />
support”, 24 th International Congress on Condition Monitoring and Diagnostics<br />
Engineering management (COMADEM 2011), 30 May-1 June 2011, Stavenger,<br />
Norway.<br />
Roy, R., Erkoyuncu, J.A. (2011). “Service cost estimation challenges in industrial<br />
product-service systems”, Keynote Paper, 3rd CIRP International Conference on<br />
Industrial Product Service Systems, 4-6 May 2011, Braunschweig, Germany.<br />
42
Conference <strong>Publications</strong> 2010<br />
Abu-Salim, T., Shehab, E. M. and Baines T. (2010). “Conceptual Phase of Service<br />
Design Process in Result-Oriented Product-Service System: Case Study”,<br />
Proceedings of The 8 th International Conference on Manufacturing Research (ICMR<br />
2010), 14-16 September 2010, Durham, UK.<br />
Abu-Salim, T., Shehab, E. M. and Baines T. (2010) “Development of Assessment<br />
Framework for Customer Involvement in Service Design Process within Result-<br />
Oriented Product- Service System”, Cambridge Doctoral Symposium on Service, 21-<br />
24 September 2010, Cambridge, UK.<br />
Ahmad, W., Shehab, E., Abdalla, H. and Al-Ashaab, A. (2010) “Cost and Effort<br />
Drivers for Lean Product Design Projects” Proceedings of The 8 th International<br />
Conference on Manufacturing Research (ICMR 2010), 14-16 September 2010,<br />
Durham, UK.<br />
Al-Ashaab, A., Flores, M., Khan, M., Maksimovic, M., Alam, R., Shehab, E.,<br />
Doultsinou, A. and Sopelanad, A. (2010). “The Industrial Requirements of the<br />
LeanPPD Model”, International Conference on Advances in Production Management<br />
Systems (APMS), 11-13 October 2010, Cernobbio, Como, Italy.<br />
Al-Ashaab, A., Shehab, E., Alam, R., Sopelanad, A., Sorli, M., Flores, M., Taisch, M.,<br />
Stokic, D and James-Moore, M. (2010). “The Conceptual LeanPPD Model”<br />
Proceedings of the 17th ISPE International Conference on Concurrent Engineering,<br />
6-10 September 2010, Krakow, Poland<br />
Annamalai, G.V. and Roy, R. (2010). “Challenges in product service systems<br />
design”, 8th International Conference on Manufacturing Research (ICMR 2010), 14-<br />
16 September 2010, Durham, UK.<br />
Assuncao, E., Ganguly, S., Yapp, D. and Williams, S. (2010). “Conduction mode -<br />
Broadening the range of applications for laser welding”, 63rd Annual Assembly &<br />
International Conference of the International Institute of Welding, 11-17 July 2010,<br />
Istanbul, Turkey.<br />
Bastl, M., Johnson, M. (2010). “Lost in translation? The role, application and<br />
applicability of extant theories in operations management”, Production and<br />
Operations Management Conference, Vancouver, Canada.<br />
Bastl, M., Johnson, M. and Choi, T.Y. (2010). “Coalition Behaviour of a Weaker<br />
Player in Buyer-Supplier Relationships”, 17 th Annual EurOMA Conference, 6-9 June<br />
2010, Porto, Portugal.<br />
Benkhelifa, E., Farnsworth, M., Tiwari, A. and Zhu, M. L. (2010). “Evolutionary<br />
Algorithms for Planar MEMS Design Optimisation: A Comparative Study,” Nature<br />
Inspired Cooperative Strategies for Optimization (NISCO 2010), 12-14 May 2010,<br />
Grenada, Spain.<br />
Benkhelifa, E., Tiwari, A. and Pipe, A. (2010). “Evolutionary design optimisation of a<br />
32-step traffic lights controller”, IEEE Congress on Evolutionary Computation, 18-23<br />
July 2010, Barcelona, Spain.<br />
Borisoglebsky, D., Roy, R. and Shehab, E. (2010). “A process of information<br />
collection for discrete event simulation modelling of production systems”, 21st<br />
43
International Conference on Computer-Aided Production Engineering (CAPE), 13-14<br />
April 2010, Edinburgh, UK.<br />
Cakkol, M., Johnson, M., Martinez, V. and Shehab, E. (2010). “Challenges for<br />
Integrating Suppliers into Product-Service Systems Design”, International<br />
Conference on Advances in Production Management Systems (APMS), 11-13<br />
October 2010, Cernobbio, Como, Italy.<br />
Castelli, M., Jourdain, R., McMeeking, G., Morantz, P., Shore, P., Proscia, D.,<br />
Subrahmanyan, P. (2010). “Initial Strategies for 3D RAP Processing of Optical<br />
Surfaces Based on a Temperature Adaptation Approach”, Matador Conference, 14-<br />
16 July 2010, Manchester, UK.<br />
Darwish, M., Haque, B., Shehab, E. and Al-Ashaab, A. (2010). “Value Stream<br />
Mapping and Analysis of Product Development (Engineering) Processes” 8 th<br />
International Conference on Manufacturing Research (ICMR 2010), 14-16<br />
September 2010, Durham, UK.<br />
Ding, J., Wessing, S., Trautmann, H., Mehnen, J. and Naujoks B. (2010).<br />
“Sequential Parameter Optimisation for Multi-Objective Evolutionary Optimisation of<br />
Additive Layer Manufacturing”, ICME 2010, Intelligent Computation in Manufacturing<br />
Engineering, 23-25 June 2010, Capri, Italy.<br />
Durugbo, C., Bankole, O., Erkoyuncu, J. A., Tiwari, A., Alcock, J. R., Roy, R. and<br />
Shehab, E. (2010). “Product-Service Systems across Industry Sectors: Future<br />
Research Needs and Challenges”, 2nd CIRP Conference on Industrial Product-<br />
Service Systems, 14-15 April 2010, Linkoping, Sweden.<br />
Durugbo, C., Bankole, O., Tiwari, A., Alcock, J., Roy, R. and Shehab, E. M. (2010).<br />
“A Study of Key Performance Indicators for Product-Service Systems”, 2nd CIRP<br />
Conference on Industrial Product-Service Systems, 14-15 April 2010, Linkoping,<br />
Sweden.<br />
Durugbo, C., Hutabarat, W., Tiwari, A. and Alcock, J. R. (2010). “SysML for the<br />
Analysis of Product-Service Systems Requirements”, 2nd CIRP Conference on<br />
Industrial Product-Service Systems, 14-15 April 2010, Linkoping, Sweden.<br />
Durugbo, C., Tiwari, A. and Alcock, J. R. (2010). “Survey of Media Forms and<br />
Information Flow Models in Microsystems Companies”, First Doctoral Conference on<br />
Computing, Electrical and Industrial Systems 2010 (DoCEIS 2010), 22-24 February<br />
2010, Lisbon, Portugal.<br />
Durugbo, C., Tiwari, A. and Alcock, J. R. (2010). “Managing Information Flows for<br />
Product-Service Systems Delivery”, 2nd CIRP Conference on Industrial Product-<br />
Service Systems, 14-15 April 2010, Linkoping, Sweden.<br />
Erkoyuncu, J. A., Roy, R., Shehab, E. M. and Cheruvu, K. 2010 “Impact of<br />
Uncertainty on Industrial Product-Service System Delivery”, 2 nd CIRP International<br />
Conference on Industrial Product-Service Systems (IPS2), 14-15 April 2010,<br />
Linköping, Sweden.<br />
Erkoyuncu, J A, Roy, R, Shehab EM, Cheruvu, K. (2010). “Service Cost Estimation<br />
with Uncertainty using Agent Based Simulation”, 2010 Annual Conference of the<br />
ISPA/Society of Cost Estimating and Analysis (SCEA), 8-11 June 2010, San Diego,<br />
USA<br />
44
Farnsworth, M., Benkhelifa, E., Tiwari, A. and Zhu, M. (2010). “A Novel Approach to<br />
Multi-level Evolutionary Design Optimization of a MEMS Device”, 9th International<br />
Conference on Evolvable systems (ICES 2010), 6-8 Sept 2010, York, UK.<br />
Godsell, J. and Johnson, M. (2010). “Case studies into strategic supply chain<br />
alignment”, DSI Annual Meeting, 20-23 November 2010, San Diego, USA.<br />
Godsell, J., Johnson, M. and van Hoek, R. I. (2010). “How do we know what we<br />
know? A review of methods use in operations and supply chain management<br />
research”, 17th Annual EurOMA Conference, 6-9 June 2010, Porto, Portugal.<br />
Grubic, T., Baines, T.S. and Redding, L.E. (2010). “Exploring the role of diagnostic<br />
and prognostic technology in PSS”, 8 th International Conference on Manufacturing<br />
Research (ICMR 2010), 14-16 September 2010, Durham, UK.<br />
Grubic, T., Baines, T.S. and Redding, L.E. (2010), “Exploring the role of diagnostic<br />
and prognostic technology in servitized business model – survey of UK<br />
manufacturers”, 17 th International Annual EurOMA Conference, 6– 9 June 2010,<br />
Porto, Portugal.<br />
Hussain, R., Lockett, H. L., Kingston, J., Alcock, J. and Vasantha, G. (2010). “ISIR:<br />
Informed Sensitised Intelligent Response - A PSS Conceptual Design Framework<br />
using Service Characteristics”, APMS 2010 International Conference: Competitive<br />
and Sustainable Manufacturing, Products and Services. 11-13 October 2010,<br />
Cernobbio, Como, Italy.<br />
Javaid, N., Stephenson, D. J. and Vitanov, V. I. (2010). “Nano-level surface<br />
generation on H13 alloy steel by ultra-precision grinding with electrolytic in-process<br />
dressing”, 8 th International Conference on Manufacturing Research (ICMR 2010), 14-<br />
16 Sept 2010, Durham, UK.<br />
Johnson, M. (2010). “Complex systems and qualitative inquiry”, DSI Annual Meeting,<br />
20-23 November 2010, San Diego, USA.<br />
Karatzas, A., Johnson, M., Bastl, M. (2010). “Servitized and product supply networks:<br />
A research design to understand their differences and similarities”, 17 th International<br />
Annual EurOMA Conference, 6– 9 June 2010, Porto, Portugal.<br />
Lightfoot, H. et al. (2010). “Exploring the operations practices that support productcentric<br />
services”, 3 rd International EurOMA Service Operations Management Forum,<br />
20-21 September 2010, Bath, UK<br />
Lightfoot, H. and Baines, T. (2010). “Product-Centric Services: the adoption of<br />
service provision strategies by UK manufacturers”, Frontiers in Service Conference,<br />
10-13 June 2010, Karlstad, Sweden.<br />
Maginness, M., Shehab, E. M. and Beadle, C. (2010). “Integrated New Product<br />
Introduction Challenges in Aerospace Manufacturing”, 20 th CIRP International Design<br />
Conference on Global Product Development, 19-21 April 2010, Nantes, France.<br />
Mehnen, J., Ding, J., Lockett, H. and Kazanas P. (2010). “Design for Wire and Arc<br />
Additive Layer Manufacture”, 20 th CIRP International Design Conference on Global<br />
Product Development, 19-21 April 2010, Nantes, France.<br />
45
Morantz, P. and Mitchell J. (2010). “Large optics fabrication in the UK”,<br />
Manufacturing Technologies to Support Large Science Projects, 25-26 November<br />
2010, Paris, France.<br />
Raja, J. Z. and Martinez, V. (2010). “The outsourcing of industrial maintenance<br />
capabilities: espoused intentions and experienced reality”, International Conference<br />
on Advances in Production Management Systems (APMS 2010), 11-13 October<br />
2010, Cernobbio, Como, Italy.<br />
Reia de Costa, E., Skordos, A. A. and Partridge I. K. (2010). ”Flow and Filtration<br />
Modelling of Carbon Nanoparticle Loaded Thermosets in Liquid Moulding”, 10th<br />
International Conference on Flow Processes in Composite Materials (FPCM-10), 11-<br />
15 July 2010,Ascona, Switzerland.<br />
Redding, L. et al. (2010). “Exploring the process of operations strategy formulation in<br />
a servitization environment”, 3 rd International EurOMA Service Operations<br />
Management Forum, 20-21 September 2010, Bath, UK.<br />
Redding, L. E., Baines, T.S. and Grubic, T. (2010). “A theoretical framework for a<br />
stratagem formulation tool for manufacturing organisations wishing to adopt<br />
integrated service solutions”, 8 th International Conference on Manufacturing<br />
Research (ICMR 2010), 14-16 September 2010, Durham, UK.<br />
Romero Rojo, F. J., Roy, R., Shehab, E. M., Cheruvu, K., Blackman, I. and Rumney,<br />
G. A. (2010). “Key Challenges in Managing Software Obsolescence for Industrial<br />
Product-Service Systems (IPS2)”, 2 nd CIRP International Conference on Industrial<br />
Product-Service Systems (IPS2), 14-15 April 2010, Linköping, Sweden.<br />
Romero Rojo, F. J., Roy, R., Shehab, E. M. and Cheruvu, K. (2010). “A Cost<br />
Estimating Framework for Materials Obsolescence in Product-Service Systems”,<br />
Annual Conference of the ISPA/Society of Cost Estimating and Analysis (SCEA), 8-<br />
11 June 2010, San Diego, USA.<br />
Sanya, I., Shehab, E. M. and, Roy, R. (2010). “Semantic Knowledge Based<br />
Approach for Cost Modelling”, 8 th International Conference on Manufacturing<br />
Research (ICMR 2010), 14-16 September 2010, Durham, UK.<br />
Sanya, I., Shehab, E. M., Roy, R., Houseman, O. and Jonik, M. (2010). “Semantic<br />
Knowledge Based Approach for Product Maintenance Support”, 20 th CIRP<br />
International Design Conference on Global Product Development, 19-21 April 2010,<br />
Nantes, France.<br />
Sequeira Almeida, P. M. and Williams, S. (2010). “Innovative process model of Ti-<br />
6Al-4V additive layer manufacturing using cold metal transfer (CMT)”, 21 st Annual<br />
International Solid Freeform Fabrication Symposium., 9-11 August 2010, Austin,<br />
Texas, USA.<br />
Shore, P. (2010). “Enabling next generation products”, Industrial Technologies 2010,<br />
7-9 September 2010, Brussels, Belgium.<br />
Shore P, “The BoX ultraprecision grinding machine”, Manufacturing Technologies to<br />
Support Large Science Projects, 25-26 November 2010, Paris, France.<br />
46
Suder, W. and Williams, S. (2010). “Parameter selection in laser welding using the<br />
power factor concept”, 29th International Conference on Application of Lasers and<br />
Electro-Optics (ICALEO 2010), 26-30 September 2010, Anaheim USA.<br />
Tiwari, A., Fontestad, R. N. and Turner, C.J. (2010). “Drivers and barriers to the<br />
adoption of Web 2.0”, 6th International Conference on Web Information Systems and<br />
Technologies (WEBIST 2010), 24 March 2010, Valencia Spain.<br />
Tiwari, A., Hadden, J. and Turner, C. (2010). “A New Neural Network Based<br />
Customer Profiling Methodology for Churn Prediction”, 2010 International Conference<br />
on Computational Science and Its Applications (ICCSA 2010), 23-26 March 2010,<br />
Fukuoka, Japan.<br />
Tonnellier, X., Morantz, P., Shore, P. and Comley, P. (2010). “Precision grinding for<br />
rapid fabrication of segments for extremely large telescopes using the <strong>Cranfield</strong> BoX’,<br />
Proceedings of the SPIE - The International Society for Optical Engineering, Modern<br />
Technologies in Space- and Ground-based Telescopes and Instrumentation, 19 July<br />
2010, San Diego, USA.<br />
Toossi, A., Lockett, H., Raja, J. Z. and Martinez, V. (2010). “Understanding the use<br />
value dimensions of outsourced maintenance services”, International Conference on<br />
Advances in Production Management Systems (APMS 2010), 11-13 October 2010,<br />
Cernobbio, Como, Italy.<br />
Vladimirova, D., Evans, S. and Martinez, V. (2010). “Transforming the Manufacturer<br />
into a Servitized Organisation3 rd International EurOMA Service Operations<br />
Management Forum, 20-21 September 2010, Bath, UK.<br />
Vladimirova, D., Evans, S. and Martinez, V. (2010). “Conceptual Transformation<br />
Framework for Servitization”, International Conference on Advances in Production<br />
Management Systems (APMS 2010), 11-13 October 2010, Cernobbio, Como, Italy.<br />
Xiangdong, X., Marson, S., Patel, M. K., Attia, U. M., Bailey, C., O'Neill, W., Topham,<br />
D. and Desmulliez, M. (2010). “Biofluid Behaviour in 3D MicroChannel Systems:<br />
Numerical Analysis and Design Development of 3D MicroChannel Biochip<br />
Separators”, IEEE 60th Electronic Components and Technology Conference (ECTC<br />
2010), 1-4 June 2010, Las Vegas, USA.<br />
Zdebski, D., Allen, D. M. and Stephenson, D. J. (2010). “A numerical analysis of<br />
dimensional tolerance effects on the failure of micro end-mills”, 4M 2010 Conference,<br />
17-19 November 2010, Oyonnax, France.<br />
47
Conference <strong>Publications</strong> 2009<br />
Ajai, O., Tiwari, A. and Alcock, J. R. (2009). “Informatics-Based Product-Service-<br />
Systems for Point-of-Care Devices.” 1st CIRP Industrial Product-Service Systems<br />
(IPS2) Conference, 1 - 2 April 2009, <strong>Cranfield</strong>, UK.<br />
Allen, D. M., Simpkins, M., Barnes, C., Brown, R. and Johnson, R. (2009).<br />
“Photochemical Machining of Magnesium and its Alloys: From Printing Plates and<br />
Embossing Dies to Potential Microengineering Applications”, Magnesium. 8th<br />
International Conference on Magnesium Alloys & their Applications, 26-29 October<br />
2009, Weimar, Germany.<br />
Arundachawat, P., Roy, R. and Al-Ashaab, A. (2009). “An Analogy Based Estimation<br />
Framework for Design Rework Efforts”, 16th ISPE International Conference on<br />
Concurrent Engineering (CE2009), 20-24 July 2009,Taipei, Taiwan.<br />
Arundachawa, P., Roy, R. and Al-Ashaab, A. (2009). “Design Rework Prediction in<br />
Concurrent Environment: Current Trends and Future Research Directions”, 19th<br />
CIRP Design Conference 2009, 30-31 March 2009, <strong>Cranfield</strong>, UK.<br />
Baines, T. and Lightfoot, H. (2009). “The Practical Challenges of Servitization”,<br />
18th International Frontiers in Service Conference, 29 Oct – 1 Nov 2009, Honolulu,<br />
Hawaii.<br />
Bankole, O.O., Roy, R., Shehab, E. and Wardle, P. (2009). “Current Practice in<br />
Affordability Assessment of Product-Service Systems within the Aerospace and<br />
Defence industries”, 1st CIRP Industrial Product-Service Systems (IPS2)<br />
Conference, 1- 2 April 2009, <strong>Cranfield</strong>, UK.<br />
Bankole, O.O., Roy, R., Shehab, E. and Cheruvu, K. (2009). “An Affordability<br />
prediction system to assess information availability in defence projects”, 6th<br />
International Conference on Digital Enterprise Technology, 14-16 Dec 2009, Hong<br />
Kong, People’s Republic of China.<br />
Battisti, A., Reia da Costa, E., Skordos, A. A. and Partridge, I. K. (2009). “Challenges<br />
in processing fibrous composites of CNT loaded resins via liquid moulding”, 4th<br />
International Conference on Carbon Based Nanocomposites (CNT09), 20-23 Sept<br />
2009, Hamburg, Germany.<br />
Battisti, A., Skordo, A. A. and Partridge, I. K (2009). “Dielectric monitoring of CNT<br />
network formation in curing thermosetting composites”, 5th International Conference<br />
on Nanostructured Polymers and Nanocomposites, 15-17 April, 2009Paris, France.<br />
Battisti, A., Skordos, A. A. and Partridge, I. K. (2009). “Exploration of carbon<br />
nanoparticle/thermoset resin blend morphologies using dielectric spectroscopy”,<br />
EUROMAT 2009, 7-10 September 2009, Glasgow, Scotland.<br />
Benkhelifa E., Farnsworth, M., Tiwari, A. and Zhu, M. (2009). “An Integrated<br />
Framework for MEMS Design Optimisation using modeFrontier”, EnginSoft<br />
International Conference 2009 on CAE Technologies For Industry and ANSYS Italian<br />
Conference 2009, 1-2 October 2009, Bergamo, Italy.<br />
Benkhelifa, E. and Pipe, A. (2009). “Design Innovation for Real World Applications<br />
Using Evolutionary Algorithms”, IEEE Congress of Evolutionary Computation CEC<br />
2009, 18-21 May 2009, Trondheim, Norway.<br />
48
Durugbo, C., Tiwari, A. and Alcock J. R. (2009). “An Infodynamic Engine Approach to<br />
Improving the Efficiency of Information flow in a Product-Service System”, 1st CIRP<br />
Industrial Product-Service Systems (IPS2) Conference, 1- 2 April, 2009, <strong>Cranfield</strong>,<br />
UK.<br />
Erkoyuncu, J. A., Roy, R., Shehab, E. and Cheruvu, K. (2009). “Managing<br />
Uncertainty in Service Cost Estimation for Product Service Systems”, 7th<br />
International Conference on Manufacturing Research (ICMR09), 8-10 September<br />
2009, Warwick, UK.<br />
Erkoyuncu, J. A., Roy, R., Shehab, E. and Wardle, P. (2009). “Uncertainty challenges<br />
in service cost estimation for product- service systems in the aerospace and defence<br />
industries”, 1st CIRP Industrial Product-Service Systems (IPS2) Conference, 1- 2<br />
April 2009 ,<strong>Cranfield</strong>, UK.<br />
Grubic, T., Jennions, I. and Baines T. (2009). “The Interaction of PSS and PHM - a<br />
mutual benefit case”, Annual Conference of the Prognostics and Health Management<br />
Society, 27 September-1 October 2009, San Diego, USA.<br />
Kirkwood, L., Durazo-Cardenas, I. S and Shore, P. (2009). “Tool failure mechanisms<br />
while single point diamond turning silicon”, Lamdamap’s 9 th International Conference<br />
and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 30<br />
Jun - 2 July 2009, London, UK.<br />
Lightfoot, H. and Baines T, “Service Infusion in Manufacturing: a research<br />
landscape”, 18th International Frontiers in Service Conference, 29 Oct – 1 Nov 2009,<br />
Honolulu, Hawaii.<br />
Macdonald, E., Martinez, V. and Wilson, H. (2009). “Towards the assessment of<br />
value-in-use in product-service systems: a review”, Production and Operations<br />
Management Conference, 1 - 4 May 2009, Orlando, USA.<br />
Macdonald, E., Martinez, V. and Wilson, H. (2009). “Developing a framework for<br />
assessing the value-in-use of product-service systems: a case study”, The Naples<br />
Forum on Service, 16-19 June 2009, Capri, Italy.<br />
Macdonald, E., Wilson, H., Martinez, V. and Toossi A. (2009). “Assessing the valuein-use<br />
of integrated product-service offerings: a repertory grid approach”, 18th<br />
International Frontiers in Service Conference, 29 Oct – 1 Nov 2009, Honolulu,<br />
Hawaii.<br />
Martinez, V., Bastl, M., Kingston, J. and Evans, S. (2009). “Challenges in<br />
transforming manufacturing organisations into product-service providers”, Production<br />
and Operations Management Conference, 1 - 4 May 2009, Orlando, USA.<br />
Martinez, V. and Bititci, U. (2009). “A framework for understanding operational &<br />
strategic implications of product-service organisations”, Academy of Management<br />
Conference, 7-11 August 2009, Chicago, USA.<br />
Mehnen, J. (2009). “Lessons Learned in Evolutionary Computation: 11 Steps to<br />
Success”, GECCO 2009, 8-12 July 2009, Montreal, Canada.<br />
49
Mills, A. R., Dell’Anno, G. and Frost, M. (2009). “Affordable Manufacture of<br />
Lightweight, Low Maintenance Cost Future Airframes”, SAMPE International<br />
Conference, 18 – 21 May 2009, Baltimore, USA.<br />
Morris, T., Walton, I. M. and Stephenson, D. J. (2009). “Abrasive processing using<br />
Minimum Quantity Solid Lubrication (MQSL)”, 7th International Conference on<br />
Manufacturing Research (ICMR09), 8-10 September 2009, Warwick, UK.<br />
Panikowska, K., Tiwari, A. and Alcock, J. R. (2009). “Design in the Microfluidic<br />
Domain as Compared to Other Domains”, 17th International Conference on<br />
Engineering Design, 24 - 27 Aug 2009, Stanford, USA.<br />
Redding, L. (2009). “Integrated Vehicle Health Management (IVHM): An enabler to<br />
the ‘servitization’ of companies within the manufacturing sector – A model approach”,<br />
Annual Conference of the Prognostics and Health Management Society, 27<br />
September-1 October 2009, San Diego, USA.<br />
Reia da Costa, E. F., Skordos, A.A., Partridge, I. K and Rezai. (2009). “Flow of<br />
carbon nanoparticle loaded epoxy resin in liquid moulding”, 17th International<br />
Conference on Composite Materials, 27-31 July 2009, Edinburgh, Scotland.<br />
Romero Rojo, F. J., Roy, R. and Shehab E. (2009). “A Methodology for Variability<br />
Reduction in Manufacturing Cost Estimating in the Automotive Industry based on<br />
Design Features”, 19th CIRP Design Conference – Competitive Design, 30-31 March<br />
2009, <strong>Cranfield</strong>, UK.<br />
Romero, F. J., Roy, R., Shehab, E. and Wardle, P. (2009). “Obsolescence<br />
Challenges for Product-Service Systems in Aerospace and defence Industry”, 1st<br />
CIRP Industrial Product-Service Systems (IPS2) Conference, 1- 2 April 2009,<br />
<strong>Cranfield</strong>, UK.<br />
Roy, R., Datta, P., Romero Rojo, F. J. and Erkoyunku, J. A. (2009). “Cost of<br />
Industrial Product Service Systems (IPS2)”, 16 th CIRP International Conference on<br />
Life Cycle Engineering, 4-6 May 2009, Cairo, Egypt.<br />
Sagoo, J., Tiwari, A. and Alcock, J. R. (2009). “A Descriptive Model of the Current<br />
Microelectromechanical Systems (MEMS) Development Process”, 17th International<br />
Conference on Engineering Design, 24 - 27 August 2009, Stanford, USA.<br />
Suder, W., Williams, S. and Colegrove, P. (2009). “Absolute spot size effect on<br />
penetration depth in laser welding”, Lasers in Manufacturing, 15-18 June 2009,<br />
Munich, Germany.<br />
Trautmann, H., Mehnen, J. and Naujoks, B. (2009). “Pareto-Dominance in Noisy<br />
Environments”, IEEE Congress on Evolutionary Computation CEC 2009, 18- 21 May<br />
2009, Trondheim, Norway.<br />
Turner, C. J., Tiwari, A. and Mehnen, J. (2009). “Mining Process Flowcharts from<br />
Business Data: An Evolutionary Approach”, 6th CIRP-Sponsored International<br />
Conference on Digital Enterprise Technology, 14-16 December 2009, Hong Kong,<br />
China.<br />
Weiland, F.,Weimer, C., Katsiropoulos, C.V., Pantelakis, S. G, Asareh, M., Cartié, D.<br />
D. R., Mills, A. R., Skordos, A. A., Dufort, L., De Luca, P. and Pickett, A. K. (2009).<br />
50
“Manufacture of a rotor blade pitch horn using binder yarn fabrics”, 17th International<br />
Conference on Composite Materials, 27-31 July 2009, Edinburgh, Scotland.<br />
Wan Husain, W., Lockett, H. and Fielding, J. (2009). “The Role of Feedback<br />
Information in the Development of a Design for Maintainability and Service Method”,<br />
CEAS 2009, European Air and Space Conference, 26-29 October 2009, Manchester,<br />
UK.<br />
Zhu, M. and Worthington, E. (2009). “Design and Testing of Piezoelectric Energy<br />
Harvesting Devices for Generation of Higher Electric Power for Wireless Sensor<br />
Networks”, IEEE Sensors 2009, 25-28 October 2009, Christchurch, New Zealand.<br />
Zhu, M., Worthington, E. and Njuguna, J. (2009). “Coupled piezoelectric-circuit FEA<br />
to study influence of a resistive load on power output of piezoelectric energy<br />
devices”, SPIE Symposium on Microtechnologies for the New Millennium, 4-6 May<br />
2009, Dresden, Germany.<br />
51
Conference <strong>Publications</strong> 2008<br />
Buggy, S.J., James, S.W. and Tatam, R. P. (2008). “A long period grating based<br />
directional flow sensor”, Proceedings of The SPIE - The International Society for<br />
Optical Engineering, 7004, article number 70045P, 19 th International Conference on<br />
Fibre Sensors, 14-18 April 2008,Perth, Australia.<br />
Colegrove, P. A., Simiand, P. E., Varughese, A.,Williams, S. W. and Yapp, D. (2008).<br />
“Evaluation of a drilling model approach to represent laser spot microwelding”, 8th<br />
International Conference: Trends in Welding Research, 1-6 June 2008, Georgia,<br />
USA.<br />
Correia, R., Chehura, E., James, S. W. and Tatam, R. P. (2008). “A transverse<br />
loading technique to enhance the pressure measurement capability of fibre Bragg<br />
gratings”, 19 th International Conference on Fibre Sensors, 14-18 April 2008, Perth,<br />
Australia.<br />
Francis, D., James, S. W. and Tatam, R. P. (2008). “Surface strain measurement of<br />
rotating objects using shearography instrumentation based on fibre-optic imaging<br />
bundles”, International Conference on Optical Fibre Sensors (OFS-19), 14-18 April<br />
2008, Perth, Australia.<br />
Jarzebinska, R., Cheung, C. S., James, S. W., Ashwell, G. J. and Tatam, R. P.<br />
(2008). “Response of the transmission spectrum of tapered optical fibres to the<br />
deposition of a nanostructured coating”, International Conference on Optical Fibre<br />
Sensors (OFS-19), 14-18 April 2008, Perth, Australia.<br />
Mehnen, J. and Trautmann, H. (2008). “Robust Multi-objective Optimisation of Weld<br />
Bead Geometry for Additive Manufacturing”, 6th CIRP International Seminar on<br />
Intelligent Computation in Manufacturing Engineering (CIRP ICME '08), 23-25 July<br />
2008, Naples, Italy.<br />
Trautmann, H., Ligges, U., Mehnen, J., and Preuss, M. (2008). “A Convergence<br />
Criterion for Multiobjective Evolutionary Algorithms Based on Systematic Statistical<br />
Testing”, 10th International Conference on Parallel Problem Solving from Nature<br />
(PPSN X), 13-17 September 2008, Dortmund, Germany.<br />
52
Conference <strong>Publications</strong> 2007<br />
Achimugu, N., Julien, D. and Kay, J. (2006). “Enhancing alignment using a<br />
performance model: case study of high variety low volume firm”, 14th International<br />
EurOMA Conference, June 2007, Ankara, Turkey.<br />
Almond, H. J .A. and Allen, D.M. (2007). “Electrolytic machining of difficult-to-etch<br />
metals and alloys”, 20th International Conference on Computer Aided Production<br />
Engineering (CAPE) 2007, 6-8 June 2007, Glasgow, Scotland.<br />
Almond, H. J. A., Allen, D. M. and Blondeau, S. (2007). “A technical and economic<br />
comparison of the photochemical machining of AISI 304 and AISI 201 stainless<br />
steels with ferric chloride etchants”, PCMI Conference, 23 April 2007, Cambridge,<br />
Massachusetts, USA.<br />
Azarenko, A., Roy, R., Shore, P., Shehab, E. and Tiwari, A. (2007). “Technical<br />
Product-Service System: Business Models For High Precision Machine Tool<br />
Manufacturers”, 5th International Conference on Manufacturing Research, 11-13th<br />
September 2007, Leicester, UK.<br />
Baxter, D., Gao, X. and Roy, R. (2007). “Design process knowledge reuse<br />
challenges and issues”, International CAD Conference and Exhibition (CAD07), 25-<br />
27 June 2007, Honolulu, Hawaii.<br />
Baxter, D., Roy, R. and Gao, X. (2007). “Specifying a manufacturing knowledge<br />
reuse framework”, 4 th International Conference on Digital Enterprise Technology<br />
(DET2007), 17-19 September 2007, Bath, UK.<br />
Buggy, S.J., Chehura, E., Skordos, A. A., Dimopoulos, A., James, S. W., Partridge, I.<br />
K and Tatam, R. P. (2007). “Fibre grating refractometer sensors for composite<br />
process monitoring”, SPIE Europe Optical Metrology, 17-21 June 2007, Munich,<br />
Germany.<br />
Chowdhury, D. and Allen, D. M. (2007). “Enhancement of transdermal drug delivery<br />
using MEMS technologies”, 7th International Conference of the European Society for<br />
Precision Engineering and Nanotechnology, 20-24 May 2007, Bremen, Germany.<br />
Damour, L., Turner, C. J. and Tiwari, A. (2007). “Global strategic inventory planning”,<br />
5th International Conference on Manufacturing Research (ICMR-2007), 11-13th<br />
September 2007, Leicester, UK .<br />
Doultsinou, N., Roy, R., Baxter, D. and Gao, X. (2007). “Identification of Service<br />
Knowledge Types for Technical Product-Service Systems”, 4 th International<br />
Conference on Digital Enterprise Technology (DET2007), 17-19 September 2007,<br />
Bath, UK.<br />
Huang, Z., Popov, C., Chang, H., Record, P. M., Abraham, E. and Whatmore, R. W.<br />
(2007). “Direct and converse magnetoelectric effect at resonant frequency in<br />
laminated piezoelectric-magnetostrictive composite”, Piezoceramics for End Users<br />
III, 6-9 February 2007, Liberec, Czech Republic.<br />
Marson, S., Evans, R. and Allen, D. M. (2007). “Replication of polymer<br />
microcomponents: the economics of hot embossing versus injection moulding”, 20th<br />
International Conference on Computer-Aided Production Engineering (CAPE) 2007,<br />
6-8th June 2007, Glasgow, Scotland.<br />
53
Mehnen, J., Kersting, P., Roy, R. and Wagner, T. (2007). “ICSPEA: Evolutionary<br />
Five-Axis Milling Path Optimisation”, GECCO 2007. 7-10th July 2007London, UK.<br />
Mehnen, J. and Roy, R. (2007). “Multi-objective Evolutionary Algorithms Applied to<br />
Machining of Materials with Dynamically Changing Properties”, 20th International<br />
Conference on Computer-Aided Production Engineering (CAPE 2007), 6-8th June<br />
2007, Glasgow, UK.<br />
Mehnen, J., Trautmann, H. and Tiwari, A. (2007). “Introducing User Preference Using<br />
Desirability Functions in Multi-Objective Evolutionary Optimisation of Noisy<br />
Processes”, CEC 2007, IEEE Congress on Evolutionary Computation, 25-28th<br />
September 2007, Singapore.<br />
Merlo, C., Pol, G., Jared, G. E. M. and Legardeur, J. (2007). “From collaborative<br />
practices analysis to improvements in the definition of pdm workflows”, ICED07, 28-<br />
30th August 2007, Paris, France.<br />
Momoh, A., Roy, R., Shehab, E. and Snowden, D. (2007). “Challenges In Enterprise<br />
Resource Planning (ERP) Phased Approach Implementation Within A Large<br />
Organisation: A Case Study”, 5th International Conference on Manufacturing<br />
Research (ICMR2007), 11-13th September 2007, Leicester, UK.<br />
Pol, G., Merlo, C., Legardeur, J. and Jared, G. E .M. (2007)/ “Supporting<br />
collaboration in product design through PLM system customization”, PLM07, 28-30<br />
August 2007, Paris, France.<br />
Ramsden, J. J., Allen, D. M., Stephenson, D. J., Alcock, J. R., Peggs, G. N., Fuller,<br />
G. D. and Goch, G. (2007). “The design and manufacture of biomedical surfaces”,<br />
56th CIRP Annual General Assembly, 19-24 August 2007, Dresden, Germany.<br />
Stelling, M., Roy, R. and Tiwari, A. (2007). “A novel modelling & optimisation<br />
technique for business processes: An evolutionary computing based approach”, 12th<br />
Online World Conference on Soft Computing in Industrial Applications (WSC-12), 16-<br />
26 October 2007.<br />
Turner, C. J. and Tiwari, A. (2007). “An experimental evaluation of feedback loops in<br />
a business process mining genetic algorithm”, IEEE Congress on Evolutionary<br />
Computation (CEC-2007), 25-28 September 2007, Singapore.<br />
Turner, C. J. and Tiwari, A. (2007). “An experimental evaluation of genetic process<br />
mining”, Genetic and Evolutionary Computation Conference (GECCO-2007), 7-11<br />
July 2007, London, UK.<br />
Turner, C. J. and Tiwari, A. (2007). “An exploration of genetic process mining”, 12th<br />
Online World Conference on Soft Computing in Industrial Applications (WSC-12), 16-<br />
26th October 2007.<br />
Turner, C .J., Vergidis, K. and Tiwari, A. (2007). “Surveying business processes: The<br />
industry perspective”, 5th International Conference on Manufacturing Research<br />
(ICMR-2007), 11-13 September, Leicester, UK.<br />
Vergidis, K., Tiwari, A. and Majeed, B. (2007). “Composite business processes: An<br />
evolutionary multi-objective optimization approach”, IEEE Congress on Evolutionary<br />
Computation (CEC-2007), 25-28 September 2007, Singapore.<br />
54
Younis, K. and Tiwari, A. (2007). “A review of purchasing literature”, 5th International<br />
Conference on Manufacturing Research (ICMR-2007), 11-13 September 2007,<br />
Leicester, UK.<br />
Zhang, P., Baxter, D., Gao, X. and Kalta, M. (2007). “Developing A Design Process<br />
Model for The Reuse of Knowledge”, 4 th International Conference on Digital<br />
Enterprise Technology (DET2007), 17-19 September 2007, Bath, UK.<br />
55
Conference <strong>Publications</strong> 2006<br />
Allen, D. M. and Jefferies, P. (2006). “An economic, environment-friendly oxygenhydrochloric<br />
acid regeneration system for ferric chloride etchants used in<br />
photochemical machining”, 56th General Assembly of CIRP, 20-26 August 2006,<br />
Kobe, Japan.<br />
Allen, D. M., Nuclos, N., Garbutt, I., Saumer, M., Dhum, C., Schmitt, M. and<br />
Hoffmann, J. E. (2006). “The effects of additives on the physical properties of<br />
electroformed nickel and on the stretch of photoelectroformed nickel components”,<br />
2006 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, 26-<br />
28 April 2006, Stresa, Italy.<br />
Ambler, T. and Neely, A. (2006). “Assessing the quality of director's reviews in UK<br />
annual reports”, 5th International Conference on Performance Measurement, 2006,<br />
London, UK.<br />
Bastl, M. and Grubic, T. (2006). “New Collaborative Business Models for Supply<br />
Partnerships: taking advantage of shared product and process information”, 2006<br />
Logistics Research Network Annual Conference, 6-8 September, Newcastle, UK.<br />
Buggy, S. J., Chehura, E. James, S. W. and Tatam, R. P. (2006). “Long period<br />
gratings for cure monitoring applications”, Photon 06, 4-7 September 2006,<br />
Manchester, UK.<br />
Buggy, S. J., Chehura, E., James, S. W. and Tatam, R. P. (2006). “ Fibre Gratings for<br />
Cure Monitoring of Epoxy Resins, 18th International Conference of Fibre Optic<br />
Sensors, 23-27 October 2006, Cancun, Mexico.<br />
Cerruti, C. and Harrison, A. (2006). “Gucci's Agile Supply Chain”, 2006 Logistics<br />
Research Network Annual Conference, 6-8 September, Newcastle, UK<br />
Chehura, E., Murphy, R. P., James, S. W. and Tatam, R. P. (2006). “Tilted Fibre<br />
Bragg Gratings With Nano-Structured Overlays”, 18th International Conference of<br />
Fibre Optic Sensors, 23-27 October 2006, Cancun, Mexico.<br />
Coley, F., Roy, R. and Houseman, O. (2006). “Designers and cost engineers: do they<br />
think differently?”. The International Conference on Advanced Design and<br />
Manufacture, 8-10 January 2006, Harbin, China.<br />
Comley, P. Walton, I. Jin, T. and Stephenson, D. J. (2006). “A high material removal<br />
rate grinding process for the production of automotive crankshafts”, 56th General<br />
Assembly of CIRP, 20-06 August 2006, Kobe, Japan.<br />
Durazo-Cardenas,I., Shore, P., Luo, X., Jacklin,T. and Impey, S. (2006). “Tool Life<br />
influence of diamond gems whilst diamond turning of IR silicon optics”, Diamond at<br />
Work Conference, 20-21 October 2005, Barcelona, Spain.<br />
Fanara, C., Shore, P., Nicholls, J. R., Lyford, N., Sommer, P. and Fiske, P. (2006).<br />
“A New Reactive Atom Plasma Technology (RAPT) for Precision Machining: the<br />
Etching of ULE Optical Surfaces”, Conference on Optomechanical Technologies for<br />
Astronomy, 24-31 May 2006, Orlando, USA.<br />
56
Ford, H. D. and Tatam, R. P. (2006). “Full-field optical coherence tomography using a<br />
fibre imaging bundle”, Conference on Coherence Domain Optical Methods and<br />
Optical Coherence Tomography in Biomedicine X, 23-25 January 2006, San Jose,<br />
USA.<br />
Fouinneteau, M. and Pickett, A. K. (2006). “Failure characterisation of heavy tow<br />
braided composites using digital wage correlation (DIC)”, 6th International<br />
Conference on Modern Practice in Stress and Vibration Analysis, 5-7 September<br />
2006, Bath, UK.<br />
Furfari, D. and Irving, P. (2006). “Initiation and short crack growth behaviour in<br />
titanium 10V-2Al-3Fe Alloy”, 9 th International Fatigue Congress (Fatigue 2006), 14-19<br />
May 2006, Atlanta, USA.<br />
Godsell, J. and Skipworth, H. (2006). “Market Driven Supply Chains: Myth or Reality”,<br />
3rd European Forum on Market- Driven Supply Chains, 7-8 March 2006, Brussels,<br />
Belgium.<br />
Griffith, R. and Neely, A. (2006). “Incentive design for multi-task teams: Evidence<br />
from a UK distributed firm”, Royal Economic Society Annual Conference, 18-20 April<br />
2006, Nottingham, UK.<br />
Harrison, A. and Koulikoff, M. (2006). “Coordinating supply relationships: Rhetoric<br />
and reality”, Academy of Management Annual Meeting, 11-16 August 2006, Atlanta<br />
USA.<br />
Jourdain, R. P. R. and Wilson, S. A. (2006). “Thermally induced stresses in an<br />
adhesively bonded multilayer structure with 30-micron thick film piezoelectric ceramic<br />
and metal components”, 2 nd International Conference on Multi Material Micro<br />
Manufacture (4M 2006), 20-22 September 2006, Grenoble, France.<br />
Kohler, T. and Harrison, A. (2006). “Tension management in logistics service<br />
innovation projects”, British Academy of Management Annual Conference 2006, 12-<br />
14 September 2006, Belfast, NI.<br />
Koulikoff, M. and Harrison, A. (2006). “Interdependent supply relationships as<br />
institutions: the role of HR practices” EurOMA Annual Conference 2006, 18-21 June<br />
2006 Glasgow, UK.<br />
Luo, X., Shore, P., Durazo-Cardenas, I. S., Heaume, A. M. and Jacklin, T. (2006). “A<br />
new approach for measuring tool wear volume in single point diamond turning of<br />
silicon”, 4th International Conference on Manufacturing Research, 4-7 September<br />
2006, Liverpool, UK.<br />
Mason, S. A., Baines, T. S. and Wilcox, M. (2006). “Manufacturing systems and the<br />
human performance fallacy”. PMA Conference, 25-28 July 2006, London, UK<br />
Mason, S. A. and Wilcox, M. (2006). “A rationale for social and discursive<br />
Performance Measurement Systems for Predictive Management Control”, PMA<br />
Conference, 25-28 July 2006, London, UK.<br />
Miranda, R., Quintino, L., Costa, A. and Yapp, D. (2006). “Fibre laser bead-on plate<br />
welds in titanium, aluminium, and X100 steel”, 6 th International Conference on<br />
Welding, Joining and Cutting (Eurojoin 6), June 2006, Santiago de Compostela,<br />
Spain.<br />
57
Pickett, A. K. and Creech G. (2006). “Preforming simulation of comprehensive noncrimp<br />
fabric parts using a mesoscopic model”, 9th ESAFORM Conference on<br />
Materials Joining, 26-28 October 2006, Glasgow, Scotland.<br />
Roy, R., Coley, F. and Houseman, O. (2006). “Cognitive actions of Design Engineers<br />
and Cost Estimators: A Comparative Study”, 16 th CIRP International Design Seminar,<br />
16-19 July 2006, Kanaskis, Canada.<br />
Ryan, P., Prangnell, P. B. and Williams, S.W. (2006). “Epitaxial grain growth during<br />
surface modification of friction stir welded aerospace alloys by a pulsed laser<br />
system”, 10th International Conference on Aluminium Alloys (ICAA-10), 9-13 July<br />
2006, Vancouver, Canada.<br />
Shore, P., Morantz, P. and Lee, D. (2006). “Manufacturing and measurement of the<br />
MIRI spectrometer optics for the James Webb Space Telescope”, 56th General<br />
Assembly of CIRP, 206-26 August 2006, Kobe, Japan.<br />
Sweeney, M., Szwejczewski, M. and Cousens, A. (2006). “Manufacturing network<br />
flexibility - roles and capabilities”, Production and Operations Management Society<br />
Annual Conference, 28 April-1 May 2006, Boston, USA.<br />
Sweeney, M., Szwejczewski, M. and Cousens, A. (2006). “Manufacturing network<br />
flexibility - roles and capabilities”, 18 th International Annual EurOMA Conference<br />
2006, 18-23 June 2006, Glasgow, Scotland.<br />
Tonnellier, X., Shore, P., Luo, X., Baldwin, A., Morantz, P. M. H., Jin, T. and<br />
Stephenson, D. J. (2006). “Wheel wear investigations when precision grinding of<br />
optical materials using the BoX grinding mode”, Fifth International Conference on<br />
High Speed Machining, 14-16 March 2006, Metz, France.<br />
Tonnellier, X., Shore, P., Luo, X., Morantz, P. M. H., Baldwin, A., Evans, R. and<br />
Walker, D. (2006). “Wheel wear and surface/subsurface qualities when precision<br />
grinding optical materials”, Conference on Optomechanical Technologies for<br />
Astronomy, 24-31 May 2006, Orlando, USA.<br />
Tonnellier, X., Shore, P., Morantz, P. M. H. Luo, X. and Baldwin, A. (2006). “Diamond<br />
resin bond wheel wear in precision grinding of optical materials”, 4th International<br />
Conference on Manufacturing Research (ICMR 2006), 5-7 September 2006,<br />
Liverpool, UK.<br />
Turnball James, K. and Denyer, D. (2006). “Learning for sector change: the<br />
development of a knowledge sharing and learning network”, Organization<br />
Knowledge, Learning and Capabilities Conference, 20-22 March 2006, Warwick, UK.<br />
Turnball James, K. and Denyer, D. (2006). “Making business schools relevant:<br />
impacting management practice through appropriate modes of learning”, IMD<br />
Executive Education Conference, 3-4 July 2006, Lausanne, Switzerland.<br />
Wilson, S. A., Jourdain, R. P. R., Whatmore, R. W., Morantz, P. M. H., Corbett, J.,<br />
Hucker, M.J. and Warsop, C. (2006). “Ultra-precision machining of 30-micron PZTon-silicon<br />
laminates for piezoelectric MEMS”, 10 th International Conference on New<br />
Actuators and the 4 th International Exhibition on Smart Actuators and Drive Systems<br />
(Actuator 2006), 14-16June 2006, Bremen, Germany.<br />
58
Wong, C. and Godsell, J. (2006). “Configuring supply chains to deliver customer and<br />
shareholder value”, Logistics Research Network Conference, 2006, 6-8 September<br />
2006, Newcastle Upon Tyne, UK.<br />
Yapp, D. (2006). “Recent Developments in High Productivity Pipeline Welding, IIW<br />
Annual Assembly, 28 August 2006, Quebec, Canada.<br />
59
Conference <strong>Publications</strong> 2005<br />
Achanga P., Shehab, E., Roy, R. and Nelder, G. (2005). “Lean Manufacturing to<br />
Improve Cost-Effectiveness of SMEs”, The Seventh International Conference on<br />
Stimulating Manufacturing Excellence in Small and Medium Enterprises (SMESME<br />
2005), 12-15 June 2005, Strathclyde, Scotland.<br />
Achanga, P., Shehab, E., Roy, R. and Nelder, G. (2005). “Lean Manufacturing for<br />
SMEs: enabling rapid response to demand changes”, 15th International Conference<br />
on Engineering Design (ICED 05), 15-18 August 2005, Melbourne, Australia.<br />
Allen, D. M., Almond, H. J. A., Hollinshead, N. and Kayode Ake, G. (2005).<br />
“Comparisons of various physical characteristics of electroformed nickels and nickelcobalt<br />
alloys as an aid for the selection of micro-mould insert materials”, Design,<br />
Test, Integration and Packaging of MEMS/MOEMS, 1-3 June 2005, Montreux,<br />
Switzerland.<br />
Aziz, H., Gao, J., Maropoulos, P. G. and Cheung, W. M. (2005). “Advanced Tools<br />
and Technologies for Collaborative Product Development and Knowledge<br />
Management”, 3rd International Conference on Manufacturing Research 2005 (ICMR<br />
2005), 6-8 September 2005, <strong>Cranfield</strong>, UK.<br />
Baxter, D. and Gao, J. (2005). “Formalising Customer Requirements as an Input to a<br />
Design Knowledge Reuse System, 3rd International Conference on Manufacturing<br />
Research 2005 (ICMR 2005), 6-8 September 2005, <strong>Cranfield</strong>, UK.<br />
Baxter, D. and Gao, J. (2005). “Process based design knowledge reuse through<br />
process and product representation”, 12 th International CIRP Life Cycle Engineering<br />
Seminar, 3-5 April 2005, Grenoble, France.<br />
Bradfield, D. and Gao, J. (2005). “Facilitation of Knowledge Sharing in the Product<br />
Innovation Process”, 3rd International Conference on Manufacturing Research 2005<br />
(ICMR 2005), 6-8 September 2005, <strong>Cranfield</strong>, UK.<br />
Burley, G., Odi, R., Naing, S. and Corbett, J. (2005). “An Algorithm for Assembly<br />
Centric Design”, AEROFAST 2002, SAE Aerospace Automated Fastening<br />
Conference, 11 March, 2005, Chester, UK.<br />
Chau, E., Friend, C. M., Allen, D. M., Hora, J. and Webster, J. R. (2005). “A<br />
technical and economic appraisal of shape memory alloys for aerospace<br />
applications”, International Conference on Martensitic Transformations, 14-17 June<br />
2005, Shanghai, China.<br />
Chen, Y. C. K. and Sackett, P. (2005). “Specialised Requirements Management<br />
System for Maintenance Service Industry”, International Council on Systems<br />
Engineering, INCOSE 2005, 10-15 July, 2005, Rochester, New York, USA.<br />
Chen, Y. C. K. and Sackett, P. (2005). “The Stakeholder and Customer<br />
Requirements Analysis in a High Technology Product maintenance Service”, 16th<br />
Annual Conference of Production and Operations Management Society, POMS<br />
2005, 29 April- 2 May 2005, Chicago, USA.<br />
Chen, Y. C. K. and Sackett, P. (2005). “The Stakeholder and Customer<br />
Requirements Analysis in a High Technology Product Maintenance Service”, 3rd<br />
60
International Conference on Manufacturing Research 2005 (ICMR 2005), 6-8<br />
September 2005, <strong>Cranfield</strong>, UK.<br />
Cheung, W. M. Maropoulos, P. G. Gao, J. Aziz, H. Ontological approach for<br />
Fanara, C., Nicholls, J. R. and Shore, P. (2005). “Atmospheric pressure inductively<br />
coupled plasma for SiC mirrors precision machining”, 32nd Annual IoP Plasma<br />
Physics Group Conference, 21-24 March, 2005, Oxford, UK.<br />
Gao, J., Baxter, D., Mountney, S., Bradfield, D. and Sackett, P. (2005). “Knowledge<br />
Management for New Product Development”, 3rd International Conference on<br />
Manufacturing Research 2005 (ICMR 2005), 6-8 September 2005, <strong>Cranfield</strong>, UK.<br />
Gashi, B., Shore, P. and Stephenson, D. J. (2005). “Thermal analysis of joint<br />
interfaces in machine tools”, 7th International Conference on Laser Metrology,<br />
Machine Tool, CMM and Robotics Performance (LAMDAMAP 2005), 27-30 June<br />
2005, <strong>Cranfield</strong>, UK.<br />
Jin, T. and Stephenson, D. J. (2005). “Optimising the process conditions in ultraprecision<br />
grinding to achieve surface finish of optical quality”, CCAT Conference, 19<br />
Aug 2005, China.<br />
Lavdas, E., Roy, R., Wainwright, C. E. R. and Houseman, O. (2005). “Cost<br />
Estimating Knowledge Capture: a Novice Based Approach”, The International<br />
Society of Parametric Analysts and The Society of Cost Estimating and Analysis 5th<br />
Joint International Conference and Educational Workshop, 14-17 June 2005, Denver,<br />
Colorado, USA.<br />
Lee Gan Kai W., Baines, T. S. and Tjahjono, B. (2005). “Agile Manufacturing:<br />
Competitive Advantage for Semiconductors Industry”, 16th Annual Conference of the<br />
Production and Operations Management Society, 29 April-2 May 2005, Chicago, IL,<br />
USA.<br />
Lettice, F., Jukes, S. and Evans, S. (2005). “The role of Alignment in Co-<br />
Development Improvement”, European Institute for Advanced Studies in<br />
Management (EIASM) 8th International Product Development Management<br />
Association (PDMA) Conference, 14 February 2005, Enschede, The Netherlands.<br />
Ling, D., Roy, R., Shehab, E. and Jaiswal, J. (2005). “Railway Asset Maintenance<br />
and Renewal Cost Estimation Challenges”, 15th Annual Conference of the Society of<br />
Cost Estimating and Analysis (SCEA), 14-17 June 2005, Colorado, USA.<br />
Merlo, C., Pol, G., Jared, G., Legardeur, J. and Girard, P. (2005). “Controlling<br />
Collaboration for Engineering Design Coordination”, 17th World Congress on<br />
Scientific Computation, Applied Mathematics and Simulation (IMACS05), 11-15 July<br />
2005, Paris, France.<br />
Morantz, P. M. H., Shore, P., Stephenson, D. J., May-Miller, R. and Read, R. (2005).<br />
“From tetrahedral to box: design philosophy behind the <strong>Cranfield</strong> Big OptiX system2,<br />
5th International Conference of the European Society of Precision Engineering and<br />
Nanotechnology, 8-11 May 2005. Montpellier, France.<br />
Morantz, P., Shore, P. and Lee, D. (2005). “Metrology of Imaging Mirror Arrays for<br />
Space Telescope Spectrometer Optics”, 7th International Conference on Laser<br />
61
Metrology, Machine Tool, CMM and Robotics Performance (LAMDAMAP 2005), 27-<br />
30 June 2005, <strong>Cranfield</strong>, UK.<br />
Mountney, S. and Gao, J. (2005). “Manufacturing knowledge to support preliminary<br />
design: an exploratory case study”, 3rd International Conference on Manufacturing<br />
Research 2005 (ICMR 2005), 6-8 September 2005, <strong>Cranfield</strong>, UK.<br />
Oduguwa, P. A, Roy, R. and Sackett, P. (2005). “A rule based cost estimating<br />
approach for design requirement changes”, 5th Joint ISPA/SCEA International<br />
Conference, 14-17 June 2005, Denver, Colorado, USA.<br />
Pol, G., Jared, G. and Merlo, C. (2005). “Legardeur Prerequisites for the<br />
implementation of a product data and process management tool in an SME”,<br />
International Conference on Engineering Design (ICED05), 15-18 August 2005,<br />
Melbourne, Australia.<br />
Pol, G., Merlo, C., Jared, G. Legardeur, J. From PDM systems to integrated project<br />
management systems: a case study. PLM05 International Conference on Product<br />
Lifecycle Management. Lyon, France, 1 July, 2005.<br />
Pol, G., Merlo, C., Legardeur, J. and Jared, G. (2005). “Vers le pilotage de la<br />
collaboration en conception de produits: cas d’etude d’une PME”, 9ème AIP<br />
PRIMECA, 5-8 April 2005, La Plagne, France.<br />
Rios, J., Lopez, A. and Roy, R. (2005). “Design requirements change and cost<br />
impact: an aerospace perspective”, 12th ISPE International Conference on<br />
Concurrent Engineering: Research and Applications (CE 2005), 25-29 July 2005, Ft.<br />
Worth, Dallas, USA.<br />
Roy, R., Kerr, C., Oduguwa, P. A., Makri, C. and Sackett, P. (2005). “Design<br />
Requirements Management: a new perspective”, 15th International CIRP Design<br />
Seminar 2005, 22-26 May 2005, Shanghai, China.<br />
Roy, R., Rios, J., Hussla, I. and Hansen, L. (2005). “Virtual Cost Engineering Studio<br />
(V-CES): the challenges of a Just In time service for cost engineering professionals”,<br />
eChallenges 2005, 19-21 October 2005, Ljubljana, Slovenia.<br />
Roy, R. and Rios, J. (2005). “Virtual Cost Engineering Studio (V-CES): a framework<br />
for Cost Engineering services”, 11 th International Conference on Concurrent<br />
Enterprising (ICE 2005), 20-22 June 2005, Munich, Germany.<br />
Sackett, P., Chen, Y .C. K., Huang, S. and Wang, T.C. (2005). “The Crisis Analysis in<br />
a Requirements Driven Maintenance Service”, 3rd International Conference of Crisis<br />
Management, 25 November 2005, Hsinchu, Taiwan, China.<br />
Sackett, P. and Chen, Y. C. K. (2005). “Requirements Management in Product<br />
Maintenance Service - an adaptive technique”, 7th International Conference on<br />
Modern Information Technology in the Innovation processes of Industrial Enterprises.<br />
8-9 September 2005, Genoa, Italy.<br />
Sackett, P. (2005). “Unrecognised Crises - Unexpected Solutions”, 3rd International<br />
Conference of Crisis Management, 25 November 2005, Hsinchu, Taiwan, China.<br />
Shah, S., Roy, R. and Tiwari, A. (2005). “Development of Fuzzy Expert System for<br />
Customer and Service Advisor Categorisation within Contact Centre Environment”,<br />
62
10th Online World Conference on Soft Computing in Industrial Applications (WSC-<br />
10), 19 September 2005.<br />
Shah, S., Roy, R., Tiwari, A. and Majeed, B. (2005). “Customised Customer Support<br />
Using a Soft Computing Approach”, International Conference on Computational<br />
Intelligence for Modelling, Control and Automation (CIMCA), 28 November 2005,<br />
Vienna, Austria.<br />
Shore, P., Luo, X., Jin, T., Tonnellier, X., Morantz, P. M. H. and Stephenson, D. J..<br />
(2005). “Grinding mode of the BOX ultra precision free-form grinder”, 20 th Annual<br />
Meeting of the American Society for Precision Engineering, 9-14 October 2005,<br />
Norfolk, VA, USA.<br />
Shore, P., Morantz, P. M. H., Luo, X., Collins, R. G., Roberts, A., May-Miller, R. and<br />
Read, R. (2005). “Big OptiX ultra precision grinding/measuring system2, Optical<br />
Fabrication, Testing, and Metrology II, 13-15 September 2005, Jena, Germany.<br />
Shore, P., Morantz, P., Luo, X., Tonnellier, X., Read, R. and May-Miller, R.(2005).<br />
“Design philosophy of the ultra precision big OptiX BoX machine”, 7th International<br />
Conference on Laser Metrology, Machine Tool, CMM and Robotics Performance<br />
(LAMDAMAP 2005), 27-30 June 2005, <strong>Cranfield</strong>, UK.<br />
Sun, X., Stephenson, D. J. and Hedge, J. I. (2005). “Assessment of ELID grinding of<br />
optical glass by acoustic emission”, 7th International Conference on Laser Metrology,<br />
Machine Tool, CMM and Robotics Performance (LAMDAMAP), 27-30 June 2005,<br />
<strong>Cranfield</strong>, UK.<br />
Uriarte, L., Ivanov, A., Oosterling, H., Staemmler, L., Tang, P. T. and Allen, D. M.<br />
(2005). “A comparison between microfabrication technologies for metal tooling”,<br />
International Conference on Multi-Material Micro Manufacture (4M), 29 June-1 July<br />
2005, Karlsruhe, Germany.<br />
Wilson, S. A., Jourdain, R. P. R., Whatmore, R. W., Morantz, P. M. H., Arai, S.,<br />
Corbett, J., Hucker, M. J. and Warsop, C. (2005). “ Ultraprecision machining of 30micron<br />
PZT-on-silicon laminates for piezoelectric MEMS”, MNT 2005, 12-14<br />
December 2005, London, UK.<br />
Zervos, C., Robinson, M. J.and Stephenson, D. J. (2005). “Fundamental studies of<br />
oxide layer characteristics during ELID grinding of glass”,7th International<br />
Conference on Laser Metrology, Machine Tool, CMM and Robotics Performance<br />
(LAMDAMAP 2005), 27-30 June, 2005, <strong>Cranfield</strong>, UK.<br />
63
Conference <strong>Publications</strong> 2004<br />
Arai, S., Corbett, J., Whatmore, R. W. and Wilson, S. A. (2004). “Surface Integrity<br />
Control of Piezoelectric Materials in Ultraprecision Grinding”, 4th International<br />
Conference of the European Society for Precision Engineering and Nanotechnology,<br />
30 May-3 June 2004, Glasgow, UK.<br />
Baxter, D. and Gao, J. X. (2004). “Process based knowledge management for<br />
product development”, 2nd International Conference on Manufacturing Research, 7-9<br />
September 2004, Sheffield, UK.<br />
Brintrup, A., Camirillo, A. and Gao, J. (2004). “Shaping of a Knowledge Management<br />
Strategy for the Distributed Manufacturing Organisation”, 2nd International<br />
Conference on Manufacturing Research, 7-9 September 2004, Sheffield, UK.<br />
Brintrup. A., Tiwari, A. and Gao, J. (2004). “Handling Qualitativeness in Evolutionary<br />
Multiple Objective Engineering Design Optimisation”, International Conference of<br />
Computational Intelligence (ICCI), 17-19 December 2004, Istanbul, Turkey.<br />
Burr, M. and Denyer, D. (2004). “Developing an applied research programme through<br />
knowledge co-production: the Mouchel-<strong>Cranfield</strong> cast study”, Knowledge<br />
Management International Conference and Exhibition (KMICE), Towards Intelligent<br />
and Co-operative Nations, 13-15 February 2004, Penang, Malaysia.<br />
Cheung, W. M., Maropoulos, P. G., Gao, J. X. and Aziz, H. (2004). “A framework for<br />
distributed workflows, peer-to-peer and PLM/PDM collaborations to support OEMs<br />
and SMEs”, 2 nd International Seminar on Digital Enterprise Technology (DET04), 13-<br />
15 September 2004, Seattle, Washington, USA.<br />
Cheung, W. M., Maropoulos, P. G., Gao, J. X. and Aziz, H. (2004). “Web-based<br />
knowledge management methods for collaborative product development”, 2nd<br />
International Conference on Manufacturing Research, 7-9 September 2004,<br />
Sheffield, UK.<br />
Gao, J. and Eadie, R. (2004). “An interactive tolerance optimization system using<br />
manufacturing capability knowledge”, 12 th International Conference on Concurrent<br />
Engineering, the Worldwide Engineering Grid, 26-30 July 2004, Beijing, China.<br />
Gao, J. X. and Aziz, H. (2004). “Case studies of collaborative knowledge<br />
management in the early phases of product development”, EASED 04, 19-21 April<br />
2004, Xian, China.<br />
Godsell, J. and Harrison, A. (2004). “From Christmas mugs to prescription drugs: a<br />
challenge for customer responsive supply chains”, ISL Conference, 11-14 July, 2004,<br />
Bangalore, India.<br />
Godsell, J. and Harrison, A. (2004). “Customer responsive supply chain<br />
management: an unnatural act?”, Logistics Research Network Conference, 9-10<br />
September 2004, Dublin, Ireland.<br />
Godsell, J. (2004). “Postponement – a practical tool for aligning marketing and<br />
logistics strategy”, EUROMA/POMS Conference, 30 April – 3 May 2004, Cancun,<br />
Mexico.<br />
64
Jones, P., Tiwari, A., Roy, R. and Corbett, J. (2004). “Multi-objective Optimisation<br />
with Uncertainty”, Artificial Intelligence and Soft Computing, 1-3 September 2004,<br />
Marbella, Spain.<br />
Jones, P., Tiwari, A., Roy, R. and Corbett, J. (2004). “Optimisation of the High<br />
Efficiency Deep Grinding Process with Fuzzy Fitness Function and Constraints”.<br />
IEEE Congress on Evolutionary Computation (CEC-2004), 19-23 June 2004,<br />
Portland, USA.<br />
Jourdain, R., Wilson, S., Whatmore, R., Morantz, P., Corbett, J., Hucker, M. J. and<br />
Warsop, C.(2004). “Precision multi-point grinding of commercial PZT wafers for<br />
Piezoelectric micro-actuators”, 4th International Conference of the European Society<br />
for Precision Engineering and Nanotechnology, 30 May-3 June 2004, Glasgow, UK.<br />
Kerr, C., Roy, R. and Sackett, P.J. (2004). “The electronic-enabling of product<br />
specifications for the digital environment of the automotive supply chain”, 4th<br />
International Conference on e-Engineering and Digital Enterprise Technology (e-<br />
ENGDET 2004), 1-3 September 2004, Leeds, UK.<br />
Kerr, C. I. V., Roy, R. and Sackett, P. J. (2004). “Managing design changes and the<br />
implications for manufacturing within an automotive supplier”, 5th Inernational<br />
Conference on Integrated Design and Manufacturing in Mechanical Engineering<br />
(IDMME 2004) – The Design Manufacturing Interface, 5-7 April 2004, Bath, UK.<br />
Kerr, C. I. V., Roy, R. and Sackett, P. J. (2004). “A knowledge-based tool for the<br />
selection of design options during the competitive tendering of vehicle systems”,7th<br />
Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA<br />
2004), 19-22 July 2004, Manchester, UK.<br />
Kerr, C. I. V., Roy, R. and Sackett, P.J. (2004). “Designing through the supply chain:<br />
A requirements perspective”, 3rd International Conference on Total Vehicle<br />
Technology (TVT 2004), 26-27 April 2004, Brighton, UK.<br />
Kerr, C. I. V., Roy, R. and Sackett, P. J. (2004). “The assignment of product<br />
specification responsibilities for automotive system development”, 2nd International<br />
Conference on Manufacturing Research (ICMR 2004) – Encouraging Applied<br />
Research in Industry, 7-9 September 2004, Sheffield, UK.<br />
Kerr, C. I. V., Roy, R. and Sackett, P. J. (2004). “The integration of specification<br />
management in the digital product development environment for supply chain<br />
interactions”, 30th International Federation of Automotive Engineering Societies<br />
World Automotive Congress (FISITA 2004), 23-27 May 2004, Barcelona, Spain.<br />
Leslie, A., Young, K. and Lettice, F. (2004). “Inter organizational relations within the<br />
aerospace and defence industry”, British Academy of Management Annual<br />
Conference, 30 August-1 September 2004, St. Andrews, Scotland.<br />
Levene, R. J., Smart, P., Tranfield, D. R., Rowe, A., Corley, J. and Deasley, P.J.<br />
(2004). “Service delivery focus projects – suporting theories for project<br />
management”, ProMac Conference, 11-14 October 2004, Tokyo, Japan.<br />
Levene, R. J., Smart, P. and Tranfield, D. R. (2004). “Organizing for service delivery<br />
projects”, PMI Research Conference, 11-14 July 2004London, UK.<br />
65
Makri, C., Roy, R. and Sackett, P. J. (2004). “Translating environmental legislation<br />
into the engineering design domain”, 2004 SAE World Congress, 8-11 March 2004,<br />
Detroit, USA.<br />
Mason, S. A., Wilcox, M., Baines, T. S. and Ladbrook, J. (2004). “Developing<br />
predictive performance measures”, 2nd International Conference on Manufacturing<br />
Research, 7-9 September 2004, Sheffield, UK.<br />
Monteiro-Duarte, G., Evans, S. and Sackett, P. (2004). “Management of outsourcing:<br />
An exploratory model”, 7th Irish Academy of Management Annual Conference, 15-17<br />
September 2004, Dublin, Ireland.<br />
Monteiro-Duarte, G. N., Evans, S. and Sackett, P. (2004). “Outsourcing<br />
Management: The gaps to be overcome for success”, British Academy of<br />
Management Annual Conference, 30 August-1 September 2004, St. Andrews,<br />
Scotland.<br />
Oduguwa, P. A., Kerr, C. I., Roy, R. and Sackett, P. J. (2004). “Supplier estimation<br />
of design change costs”, 48th Annual Meeting of the Association for the<br />
Advancement of Cost Engineering (AACE) International, 13-16 June 2004,<br />
Washington, USA.<br />
Oduguwa, P. A., Roy, R. and Sackett, P. J. (2004). “Impact of requirement changes<br />
on automotive product development”, 2nd International Conference on Manufacturing<br />
Research, 7-9 September 2004, Sheffield, UK.<br />
Rodriguez-Toro, C., Jared, G. and Swift, K.G. (2004). “Product-Development<br />
Complexity Metrics: A Framework for Proactive-DFA Implementation”, 8th<br />
International Design Conference (DESIGN 2004), 18- 20 May 2004, Dubrovnik,<br />
Croatia.<br />
Rodriguez-Toro, C .A., Jared, G. E. M. and Swift, K. G. (2004). “Productdevelopment<br />
complexity metrics: A framework for proactive-DFA implementation2,<br />
8th International Design Conference (DESIGN 2004), 18- 20 May 2004, Dubrovnik,<br />
Croatia.<br />
Roy, R., Kerr, C. I. V., Makri, C. and Kritsilis, D. (2004). “Documenting technical<br />
specifications during the conceptualisation stages of aeroengine product<br />
development”, 8th International Design Conference (DESIGN 2004), 18- 20 May<br />
2004, Dubrovnik, Croatia.<br />
Roy, R., Kerr, C. I.V.and Sackett, P. J. (2004). “Requirements management for the<br />
automotive extended enterprise: The next evolution in digital product development”,<br />
14th International CIRP Design Seminar 2004, 16-18 May 2004, Cairo, Egypt.<br />
Roy, R., Kerr, C. I. V. and Sackett, P. J. (2004). “Requirements management: A pillar<br />
of concurrent engineering”, 11th International Society for Productivity Enhancement<br />
(ISPE) International Conference on Concurrent Engineering (CE2004), 26-30 July<br />
2004, Beijing, China.<br />
Sharma, R., Bowland, N. and Gao, J. (2004). “STEP PLCS Based Product<br />
Information Explorer for Design and in-service Product Data Management :<br />
Implementation Case Study, 14th International CIRP Design Seminar 2004, 16-18<br />
May 2004, Cairo, Egypt.<br />
66
Sharma, R. and Gao, J. (2004). “A knowledge based manufacturing and cost<br />
evaluation system for progressive design/re-design using STEP AP224”, Tools and<br />
Methods for Competitive Engineering, 13-17 April 2004, Lausanne, Switzerland.<br />
Sharma, R. and Gao, J. (2004). “Design analysis and manufacturing planning using<br />
ISO 010303 STEP AP 224”, EASED 04, 19-21 April 2004, Xian, China.<br />
Smirnov, A., Krizhanovsky, A., Roy, R. and Kerr, C. (2004). “A multi-agent system<br />
architecture for requirements management in the extended enterprise”, 11th<br />
International Society for Productivity Enhancement (ISPE) International Conference<br />
on Concurrent Engineering (CE 2004), 26-30 July 2004, Beijing, China.<br />
Swift, K. G., Brown, N. J. and Jared, G. E. M. (2004). “The designers sandpit: an<br />
environment for assembly oriented design”, 5th International Conference on<br />
Integrated Design and Manufacturing in Mechanical Engineering, IDMME04, 5-7 April<br />
2004, Bath, UK.<br />
Tranfield, D. R., Denyer, D. and Marcos, J. (2004). “Developing an evidence-based<br />
approach to management consultancy by using systematic review”, Academy of<br />
Management Conference, 6-11 August 2004, New Orleans, USA.<br />
Tranfield, D. R., Denyer, D. and Marcos, J. (2004). “Developing an evidence-based<br />
approach to management consulting”, British Academy of Management Annual<br />
Conference, 30 Aug-1 September 2004, St Andrews, Scotland.<br />
Tranfield, D. R. and Denyer, D. (2004). “Introduction to systematic review”, British<br />
Academy of Management Annual Conference, 30 Aug-1 September 2004, St<br />
Andrews, Scotland.<br />
Wilcox, M., Mason, S., Neely, A. and Bourne, M. (2004). “A pragmatic theory of<br />
prediction”, PMA Conference, 28-30 July 2004, Edinburgh, Scotland.<br />
Wilcox, M., Mason, S., Neely, A. and Bourne, M. (2004). “Predictive performance<br />
measurement: Taking control of business processes in manufacturing”, British<br />
Academy of Management Annual Conference, 30 Aug-1 September 2004, St<br />
Andrews, Scotland.<br />
Young, K., Lettice, F. and Leslie, A. (2004). “Using graphic facilitation to enhance<br />
knowledge transfer and communication within clusters”, British Academy of<br />
Management Annual Conference, 30 Aug-1 September 2004, St Andrews, Scotland.<br />
67
Conference <strong>Publications</strong> 2003<br />
Aziz, H., Gao, J. X., Maropoulos, P. G. and Cheung, W. M. (2003). “A design<br />
environment for product knowledge management and data exchange”, CIRP Design<br />
Seminar, 12-14 May 2003, Grebe, France.<br />
Aziz, H., Gao, J. X., Maropoulos, P. G. and Cheung, W. M.(2003). “New technologies<br />
and standards for design knowledge management in collaborative conceptual<br />
design”, 9 th International Conference on Concurrent Enterprising (ICE2003), 16-18<br />
June 2003, Espoo, Finland.<br />
Aziz, H,. Gao, J. X., Maropoulos, P .G. and Cheung, W. M. (2003). “Open standards,<br />
open source and peer to peer methods for collaborative product development and<br />
knowledge management”, Product Data Technology (PDT) Europe, 25-27 November<br />
2003, Manchester, UK.<br />
Aziz, H., Gao, J. X., Maropoulos, P. G. and Cheung, W. M. (2003). “Tools and<br />
Techniques for Distributed Collaborative Design and Knowledge Management”, 1 st<br />
International Conference on Manufacturing Research, 9-11 September 2003,<br />
Glasgow, Scotland.<br />
Baines, T. S. and Adesola, S. (2003). “Human Performance Modelling”, Industrial<br />
Simulation Conference, 9-11June 2003, Valencia, Spain.<br />
Baines, T. S. and Adesola, S. (2003). “Exploring future challenges in the field of<br />
human performance modelling”, Operational Research Society, Annual Conference,<br />
2-3 September 2003, Keele, UK.<br />
Baines, T. S., Hadfield, L. and Ladbrook, J. (2003). “Modelling worker performance<br />
on assembly lines”, Industrial Simulation Conference, 9-11June 2003, Valencia,<br />
Spain.<br />
Baines, T. S., Hadfield, L., Mason, S. A. and Kay, J. M. (2003). “Modelling the<br />
variation in worker performance on assembly lines”, 17 th International Conference on<br />
Pattern Recognition, 3-7 August 2003, Blacksburg, Virginia, USA.<br />
Baines, T. S. and Kay, G. (2003). “Strategic outsourcing: An empirical study of<br />
decision making processes”, International Conference on Managing Innovative<br />
Manufacturing, 22-23 September 2003, Aslborg, Denmark.<br />
Baines, T. S. and Kay, G. (2003). “Strategic positioning of internal and external<br />
operations within manufacturing supply chains”, 17 th International Conference on<br />
Pattern Recognition, 3-7 August 2003, Blacksburg, Virginia, USA.<br />
Baines, T.S. (2003). “Strategic outsourcing for competitive manufacture”,<br />
EuROMA/POMS Conference, 16-18 June 2003, Cernobbio, Lake Como, Italy.<br />
Cheung, W. M., Maropoulos, P. G., Gao, J. X. and Aziz, H. (2003). “Knowledgeenriched<br />
Product Data Management System to Support Aggregate Process<br />
Planning”, 1 st International Conference on Manufacturing Research, 9-11 September<br />
2003, Glasgow, Scotland.<br />
Cheung, W. M., Maropoulos, P. G., Gao, J. X. and Aziz, H. (2003). “The application<br />
of web-based technologies in product data management and manufacturing systems<br />
68
interoperability and data exchange”, 10 th Anniversary European Concurrent<br />
Engineering Conference (ECEC2003), 14-16 April 2003, Plymouth, UK.<br />
Cheung, W. M., Maropoulos, P. G., Gao, J. X. and Aziz, H. (2003). “Workflow activity<br />
task controller”, Product Data Technology (PDT) Europe, 25-27 November 2003,<br />
Manchester, UK.<br />
Comley, P., Stephenson, D. J. and Corbett, J. (2003). “Superfinish grinding”, 6 th<br />
International Symposium on Advances in Abrasive Technology (ISAAT 2003), 18-20<br />
November, 2003, Bristol, UK.<br />
Corbett, J. and Riemer, O. (2003). “Nanotechnology and its place in modern<br />
production”, International Congress of Precision Machining 2003, 3-6 September<br />
2003, Prague, Czech Republic.<br />
Corbett, J. (2003). “Manufacturing trends in precision engineering”, International<br />
Conference in Manufacturing Research (ICMR2003), 9-11 September 2003,<br />
Glasgow, Scotland.<br />
Corley, J. and Deasley, P. J. (2003). “Factors affecting teamworking in construction<br />
service delivery projects”, Association of Researchers in Construction (ARCOM) 19 th<br />
Annual Conference, 3-5 September 2003, Brighton, UK.<br />
Edum-Fotwe, F. T., Thorpe, A., Gregory, M. J., Deasley, P. J., Wooton, A. B., North,<br />
A. N. W. and Cooper, R. (2003). “Design team characteristics in aerospace,<br />
construction and product design for co-located and distributed projects”, 2 nd<br />
International Conference on Structural Engineering and Construction, 23-26<br />
September 2003, Rome, Italy.<br />
Edum-Fotwe, F. T., Thorpe, A., Gregory, M. J., Deasley, P. J., Wooton, A. B., North,<br />
A. N. W. and Cooper, R. (2003). “Distributed design: exploring scenarios for future<br />
smart team working”, International Conference on Smart and Sustainable Built<br />
Environment (SASBE2003), 19-23 November 2003, Brisbane, Australia.<br />
Edum-Fotwe, F. T., Thorpe, A., Wooton, A. B., North, A. N. W., Cooper, R., Gregory,<br />
M .J. and Deasley, P. J. (2003). “Managing know-how of distributed design teams in<br />
aerospace construction and product design”, Knowledge Construction, Joint<br />
International Symposium of CIB Working Commissions W55, W65 and W107, 22-24<br />
October 2003, Singapore.<br />
Edum-Fotwe, F. T., Wootton, A. B., Gregory, M. J., Thorpe, A., Cooper, R. and<br />
Deasley, P. J. (2003). “Telegenesis: cross-lessons on managing distributed design<br />
across three sectors”, 14 th International Conference on Engineering Innovative<br />
Products, Processes and Organisations, 19-21 August, 2003 Stockholm, Sweden.<br />
Emberson, C. and Godsell, J. (2003). “Customer responsiveness or customer<br />
control?” EIASM Inaugural Conference on Market-driven Supply Chains, 17-18<br />
November 2003, <strong>Cranfield</strong>, UK.<br />
Emberson, C. (2003). “The rhetoric of partnership”, EGOS Colloquium (Discourse<br />
stream), 3-5 July 2003, Copenhagen, Denmark.<br />
Fan, I. and Albert, C. (2003). “Designing Information System to Fit People and<br />
Organisation Diversity”, EIASM Workshop On Information And Organisational<br />
Design, 17-18 March 2003, Brussels, Belgium.<br />
69
Fletcher, S., Baines, T. S., Asch, R. and Ladbrook, J. (2003). “Understanding the<br />
impact of workers to improve manufacturing system design capabilities”, International<br />
Conference on Managing Innovative Manufacturing, 22-23 September 2003, Aslborg,<br />
Denmark.<br />
Hadfield, L., Baines, T. S. and Ladbrook, J. (2003). “Making the case for HPM: An<br />
empirical study of direct worker performance”, Operational Research Society, Annual<br />
Conference, 2-3 September 2003, Keele, UK.<br />
Harrison, A. and Godsell, J. (2003). “Supply chain management: putting the end<br />
customer first”, ISL Conference, 6-8 July 2003, Seville, Spain.<br />
Kalargeros, N. and Gao, J. (2003). “A customer driven rapid product development<br />
system”, International Conference in Manufacturing Research (ICMR2003), 9-11<br />
September 2003, Glasgow, Scotland.<br />
Levene, R.J. (2003). “The future directions for project management through<br />
learning”, Project Management Conference: Excellence in Teaching, Learning<br />
Assessment (LSTN BEST APM),18-23 September 2003, Bournemouth, UK.<br />
Makri, C., Sackett, P. J. and Roy, R. (2003). “PDM in the supply chain and the<br />
missing link with customer requirements in automotive new product development”,<br />
Product Data Technology Europe 12th Symposium (PDT Europe 2003), 25-27<br />
November 2003, Manchester, UK.<br />
Marcos, J., Tranfield, D. and Denyer, D. (2003). “Management Research into<br />
Practice: Exploring Knowledge Transfer and Utilization”, Knowledge Management<br />
Aston Conference, 14-15 July 2003, Aston, Birmingham.<br />
Marcos, J., Tranfield, D. and Denyer, D. (2003). “Organizational and Management<br />
Research into Practice: An Evaluation of the Use of Systematic Reviews”, European<br />
Congress of Work and Organizational Psychology, 14-17 May 2003, Lisbon,<br />
Portugal.<br />
Mason, J. P., Baines, T. S. and Ladbrook, J.(2003). “A need to consider human<br />
factors during manufacturing system design”, 20 th International Manufacturing<br />
Conference, 3-5 September 2003, Cork, Ireland.<br />
Mason, J. P., Baines, T. S. and Ladbrook, J. (2003). “Extending manufacturing<br />
simulation capability – an empirical study into the effects of the physical working<br />
environment”, Operational Research Society, Annual Conference, 2-3 September<br />
2003, Keele, UK.<br />
Mason, J. P., Baines, T. S. and Ladbrook, J. (2003). “Investigating the effects of the<br />
physical working environment upon worker performance: an empirical study”,<br />
EuEOMA/POMS Conference, 16-18 June 2003, Cernobbio, Lake Como, Italy.<br />
Mason, S. A., Baines, T. S., Mason. J. P. and Ladbrook, J. (2003). “Measurement<br />
and analysis of blocked and starved conditions in a flow line assembly plant”,<br />
Operational Research Society, Annual Conference, 2-3 September 2003, Keele, UK.<br />
Mena, C., Bernon, M., Templar, S. and Whicker, L. (2003). “Developing a tool for<br />
analysing cause-effect relationships in the supply chain”, 8 th International Symposium<br />
on Logistics, 6-8 July 2003, Seville, Spain.<br />
70
Morantz, P. and Shore, P. (2003). “Combined In-process monitoring and postprocess<br />
measurement technique for machining applications”, euspen International<br />
Topical Conference 2003, 19-20 May 2003, Aachen, Germany.<br />
Oduguwa, V., Roy, R. and Farrugia, D. (2003). “Fuzzy multi-objective optimisation<br />
approach for rod shape design in long product rolling”, Fuzzy Sets and Systems,<br />
IFSA 2003, 10 th International Fuzzy Systems Association World Congress, 2715,<br />
636-643, 30 June – 2 July 2003, Istanbul, Turkey.<br />
Oyarbide, A., Baines, T. S. and Kay, J. M. (2003). “Can system dynamics be a cost<br />
effective aid to manufacturing system designers”. 17 th ICPR, Blacksburg, 17 th<br />
International Conference on Pattern Recognition, 3-7 August 2003, Blacksburg,<br />
Virginia, USA.<br />
Oyarbide, A. and Baines, T. S. (2003). “System dynamics methodology modelling as<br />
an aid to manufacturing system design”, EuROMA/POMS Conference, 16-18 June<br />
2003, Cernobbio, Italy.<br />
Peggs, G. N., May-Miller, R., Walker, D., Atad, E., Shore, P. and Smith, D. J.<br />
(2009). “Dimensional Metrology of Mirror Segments for Extremely-Large<br />
Telescopes”, International workshop of ELTs, 1 September 2003, Backaskogs,<br />
Sweden.<br />
Roy, R., Souchoroukov, P. and Kopponen, H. (2003). “Information requirements for<br />
cost estimating and the automotive industry”, 8 th Annual ASME Design for<br />
Manufacturing Conference, 2-6 September 2003, Chicago, IL, USA.<br />
Shore, P. and May-Miller, R. (2003). “Production Challenge of the Optical Segments<br />
for Extra Large Telescopes”, International Progress on Advanced Optics and<br />
Sensors, 14-17 January 2003, Tokyo, Japan.<br />
Shore, P. and Parr-Burman, P. (2003). “Manufacture of large mirrors for ELTs: A<br />
fresh perspective”, Proceedings of the SPIE Volume 5251, Detectors and Associated<br />
Signal Processors, 1 Oct 2003, St Etienne, France.<br />
Shore, P., Puhasmagi, V., Billing, O. and Calas, P. (2003). “Intranet based systems<br />
for grinding cycle optimization”, 1st European Grinding Conference, 6-7 November<br />
2003, Aachen, Germany.<br />
Siebers, P., Baines, T. S. Mason. S. A. and Ladbrook, J. (2003). “Worker behaviour<br />
modelling; does it matter?” Operational Research Society Annual Conference, 2-3<br />
September 2003, Keele, UK.<br />
Souchoroukov, P., Roy, R. and Mishra, K. (2003). “Using functional decomposition<br />
techniques for cost estimating at the conceptual design stage”, ISPA-SCEA 4 th<br />
International Co-sponsored Conference, 17-20 June 2003, Orlando, FL, USA.<br />
Stephenson, D., Corbett, J. and Comley, P. (2003). “High Efficiency Deep Grinding<br />
and the effect on surface integrity”, 6th International Symposium on Advanced in<br />
Abrasive Technology (ISAAT 2003),18 November 2003, Bristol, UK.<br />
Stephenson, D. J. and Jin, T. (2003). “Physical basics in grinding”, 1st European<br />
Grinding Conference, 6-7 November 2003, Aachen, Germany.<br />
71
Tranfield, D., Denyer, D.and Marcos, J. (2003). “Knowledge into Practice: The<br />
Adoption and Utilization of Management Research”, British Academy of Management<br />
Annual Conference, 15-17 September 2003, Harrogate, North Yorkshire, UK.<br />
Tranfield, D., Denyer, D. and Marcos, J. (2003). “Synthesising Management<br />
Research: The Development of Field Tested and Grounded Technological Rules”,<br />
British Academy of Management Annual Conference, 15-17 September 2003,<br />
Harrogate, North Yorkshire, UK.<br />
Tranfield, D. and Denyer, D. (2003). “Democracy and the discourse of Management<br />
in a Knowledge Economy”, Academy of Management Annual Meeting, 1-6 August<br />
2003, Seattle, USA.<br />
Tranfield, D. R., Rowe, A., Levene, R. J. and Smart, P. (2003). “Knowledge into<br />
practice: an empirical contribution”, British Academy of Management Annual<br />
Conference, 15-17 September 2003, Harrogate, North Yorkshire, UK.<br />
Viseras, E. M., Baines, T. S. and Sweeney, M. (2003). “Project management: The<br />
real challenge to the implementation of manufacturing strategy”, 20 th Inernational<br />
Manufacturing Conference, 3-5 September 2003, Cork, Ireland.<br />
Viseras, E. M. and Baines, T. S. (2003). “Working towards a methodology to guide<br />
the project management of the implementation of strategic manufacturing initiatives”,<br />
International Conference on Managing Innovative Manufacturing, 22-23 September<br />
2003, Aslborg, Denmark.<br />
Walker, D. D. and Shore, P. (2003). “Manufacture of Segments for Extremely Large<br />
Telescopes: a New Perspective”, Second Backaskog Workshop on Extremely Large<br />
Telescopes, 9-11 September 2003, Backaskog Castle, Sweden.<br />
White, A. and Daniel, E. M. (2003). “Electronic marketplace-to marketplace alliances:<br />
emerging trends and strategic rationales”, 5 th International Conference on Electronic<br />
Commerce, 30 September-3 October 2003, Philadelphia, USA.<br />
White, A. and Daniel, E. M. (2003). “Electronic Marketplaces: An Empirical Study in<br />
the UK Healthcare Sector”, 4 th World Congress on E-Business, 15-17 January 2003,<br />
Hamilton, Canada.<br />
Zervos, C., Stephenson, D. J. and Robinson, M. J. (2003). “Electrochemical<br />
measurements for surface-film characterisation in high precision grinding process”,<br />
44th Corrosion Science Symposium, 14 September 2003, Southampton, UK.<br />
72
Conference <strong>Publications</strong> 2002<br />
Aziz, H., Gao, J., Maropoulos, P. and Cheung, W. M. (2002). “Advanced Tools and<br />
Technologies for Collaborative Product Development and Knowledge Management”,<br />
18 th National Conference on Manufacturing Research (NCMR), 10-12 September<br />
2002, Leeds, UK.<br />
Baines T. S. (2002). “Human performance modelling as an aid to manufacturing<br />
system design”, Annual Meeting of the Production and Operations Management<br />
Society, 6-8 April 2002, San Francisco, USA.<br />
Bermell-Garcia, P., Mulet, E., Vidal, R., Garcia-Fernandez, L. and Fan, I. (2002). “A<br />
Multi-Agent System To Support Engineering Design2, Intelligent Agents in Design<br />
Workshop at 7th International Conference on Artificial Intelligence in Design<br />
(AID2002), 13-14 July 2002, Cambridge, UK.<br />
Bostick, M.and Godsell, J. (2002). “Growing-up in the new economy: an investigation<br />
into the practicality and applicability of CPFR within the FMCG environment”, EuR-<br />
OMA Conference, 2-4 June 2002, Copenhagen, Denmark.<br />
Burley, G., Odi, R., Naing, S. and Corbett, J. (2002). “An Algorithm for Assembly<br />
Centric Design”, AEROFAST 2002, SAE Aerospace Automated Fastening<br />
Conference, 11 March 2002, Chester, UK.<br />
Castanos, A. and Mills, A. R. (2002). “Analysis of multicell braided composite joints”,<br />
Future Car Congress, 3-5 June 2002, Washington, Virginia, USA.<br />
Cheung, W. M., Maropoulos, P., Aziz, H. and Gao, J. (2002). “ntegration of a<br />
manufacturing model with a state-of-the-art PDM system”, 1 st CIRP International<br />
Seminar on Digital Enterprise Technology, 16-17 September 2002, Durham, UK.<br />
Cook, M. and Bhamra, T. (2002). “Evolutionary Perspectives on Adoption of the Ecoservice<br />
Concept”, 7 th International Conference Towards Sustainable Product Design<br />
7: Managing Sustainable Products: Organisational Considerations in Product and<br />
Service Development, 28-29 October 2002, London, UK.<br />
Corley, J., Deasley, P., Levene, R., Rowe, A., Smart, P. and Tranfield, D. (2002).<br />
“Constructing New Relationships for Service: Advances in Construction Industry<br />
Practice Inspired by Public-Private Partnerships”, British Academy of Management<br />
Conference (BAM2002), 9-11 September 2011, Middlesex, UK.<br />
Daniel, E. M., Hoxmeier, J., White, A. and Smart, A. (2002). “A Framework for the<br />
Sustainability of E-Marketplaces”, 7 th Annual Conference of the UK Academy for<br />
Information Systems, 10-12 April 2002, Leeds, UK.<br />
Eadie, R. and Gao, J. (2002). “A Tolerance Optimisation System for the Design<br />
Environment using Process Capability and Test Data”, 1 st CIRP International<br />
Seminar on Digital Enterprise Technology, 16-17 September 2002, Durham, UK.<br />
Eadie, R. and Gao, J. (2002). “A Tolerance Optimisation System for the design<br />
Environment”, 35th CIRP Manufacturing Systems Seminar, 13-15 May 2002, Seoul,<br />
Korea.<br />
Edum-Fotwe, F. T., Gregory, M. J., Thorpe, A., Cooper, R. and Deasley, P. J. (2002).<br />
“Managing distributed design teams and processes: A cross-sector study of<br />
73
construction and aerospace”, 18 th Annual Conference of the Association of<br />
Researchers in Construction Management, 2-4 September 2002, Newcastle, UK.<br />
Emberson, C. (2002). “Shaping customer responsive supply chains – an interactional<br />
approach”, British Academy of Management Conference, 9-11 September 2002,<br />
London, UK.<br />
Fletcher, S., Mason, J. P., Baines, T. S., Asch, R. and Ladbrook, J. (2002).<br />
“Understanding the Impact of Human Variability in the Manufacturing System”, 18 th<br />
National Conference on Manufacturing Research (NCMR), 10-12 September 2002,<br />
Leeds, UK.<br />
Gao, J. and Sharma, R. (2002). “A STEP Enabled and PDM-based Manufacturing<br />
Planning Systems”, 5th International Conference on Frontiers of Design and<br />
Manufacturing, 10-12 July 2002, Dalian, China.<br />
Gao, J. and Welti, M. (2002). “An Enterprise-wide Product Data Management Driven<br />
Knowledge Based Design System”, 5th International Conference on Frontiers of<br />
Design and Manufacturing, 10-12 July 2002, Dalian, China.<br />
Gao, J. X., Aziz, H., Sharma, R., Welti, M., Bowland, N .W., Maropoulos, P. and<br />
Cheung, W. M. (2002). “Application of PDM Technologies for Enterprise Integration”,<br />
1 st CIRP International Seminar on Digital Enterprise Technology, 16-17 September<br />
2002, Durham, UK.<br />
Garside, P., Burns, A. and Evans, S. (2002). “Foresight Vehicle Program – Customer<br />
Understanding Processes in Design”, The Society of Automotive Engineers World<br />
Congress, 1-7 March 2002, Detroit, USA.<br />
Godsell, J. and Harrison, A. (2002). “Customer responsiveness: an exploratory view<br />
of a supply chain strategy for the new economy”, EuROMA Conference, 2-4 June<br />
2002, Copenhagen, Denmark.<br />
Godsell, J. and Harrison, A. (2002). “Strategy formulation in an FMCG supply chain”,<br />
Logistics Research Network Conference, 4-6 September 2002, Birmingham, UK.<br />
Godsell, J. (2002). “Customer responsive supply chains: exploring the alignment<br />
between marketing, operations, management and logistics”, ELA Doctoral<br />
Colloquium, 26-28 June 2002, Monchy St Eloi, France.<br />
Hadfield, L., Baines, T. S.and Ladbrook, J. (2002). “Human Performance Modelling –<br />
The Interaction of the Organization and the Individual”, 18th National Conference on<br />
Manufacturing Research, 10-12 September 2002, Leeds, UK.<br />
Hadfield, L., Fletcher, S., Mason, J. P., Baines, T. S. and Ladbrook, J. (2002). “A<br />
Theoretical Framework for Human Performance Modelling”, 2nd International<br />
Conference on Systems Thinking in Management (ICSTM02), 3-5 April 2002,<br />
Salford, UK.<br />
Harrison, S. and Godsell, J. (2002). “Customer responsive supply chains: an<br />
exploratory view of performance measurement”, Performance Measurement<br />
Association Conference, 16-19 July 2002, Boston, MA, USA.<br />
Kyratsis, P., Zuburtikudis, I., Peristeri, S. and Gao, J.(2002). “CAD/CAM/CAE<br />
Technology Transfer from OEMs to their Suppliers - System and Process Integration<br />
74
in a Highly Competitive Global Environment”, International Conference on<br />
Manufacturing Engineering (ICMEN), 3-4 October 2002, Chalkidiki, Greece.<br />
Levene, R. J. (2002). “The Future Directions for Project Management through<br />
Learning”, British Academy of Management Conference (BAM2002), Middlesex<br />
<strong>University</strong>, 9-11 September 2002, London, UK.<br />
Levene, R., Rowe, A., Smart, P., Tranfield, D., Deasley, P. and Corley, J. (2002).<br />
“New Management Forms for Construction Projects”, IEEE International Engineering<br />
Management Conference (IEMC-2002), 18-20 August 2002, Cambridge, UK.<br />
Levene, R. J. and Smart, P. (2002). “Service Delivery – A New Future for Project<br />
Management”, 5 th European Project Management Conference, PMI Europe 2002, 19-<br />
20 June 2002, Cannes France.<br />
Levene, R. J., Rowe, A., Smart, P., Tranfield, D. R., Deasley, P. J. and Corley, J.<br />
(2002). “New management forms for construction projects”, IEEE International<br />
Engineering Management Conference (IEMC-2002), 18-20 August 2002, Strathclyde,<br />
Scotland.<br />
Mason, J. P., Fletcher, S., Baines, T. S. and Ladbrook, J. (2002). “Physical<br />
Environment – A Challenge to the Extension of Simulation Capabilities”, 18th<br />
National Conference on Manufacturing Research, 10-12 September 2002, Leeds,<br />
UK.<br />
Mason, S., Siebers P. O. and Baines T. S. (2002). “Humans: The Missing Link in<br />
Simulation?” Operational Research Society, Simulation Study Group Two-day<br />
Workshop, 20-21 March 2002, Birmingham, UK.<br />
Mena, C., Bernon, M., Templar, S. and Whicker, L. (2002). “Costing waste in the<br />
supply chain; A case study in the food industry”, Logistics Research Network<br />
Conference, 4-5 September 2002, Birmingham, UK.<br />
Mills, A. R., Castanos, A. and Frost, M. (2002). “Materials and process technology<br />
development for an ultralight composite car”, 23 rd International SAMPE Europe<br />
Conference, 9-11 April 2002, Paris, France.<br />
Mills, A. R. (2002). “Development of a carbon fibre composite ultra lightweight vehicle<br />
structure”, The Society of Automotive Engineers World Congress, 1-7 March 2002,<br />
Detroit, USA.<br />
Mishra, K., Roy, R., Souchoroukov, P. and Taratoukhine, V. (2002). “Knowledge in<br />
the commercial and engineering activities within cost estimating”, ISPE Conference<br />
on Concurrent Engineering Conference, 27-31 July 2002, <strong>Cranfield</strong>, UK.<br />
Morantz, P., Maeda, C. and Ueda, H. (2002). “Ultra-precision machining hard metals:<br />
turning versus grinding”, 2nd International Conference of the European Society of<br />
Precision Engineering and Nanotechnology, 26-30 May 2002, Eindhoven, The<br />
Netherlands.<br />
Oyarbide, A., Baines, T. S., Kay, J. M. and Ladbrook, J. (2002). “Manufacturing<br />
Systems Modelling using System Dynamics: Forming a dedicated modelling tool”,<br />
2nd International Conference on Systems Thinking in Management (ICSTM02), 3-5<br />
April 2002, Salford, UK.<br />
75
Partington, D. and Young, M. (2002). “Programme management competence: A<br />
contemporary research agenda”, 62 nd Annual Meeting of the Academy of<br />
Management, 9-14 August 2002, Denver, CO, USA.<br />
Rodriguez-Toro, C. A., Tate, S. J. Jared, G.E. M. and Swift, K.G. (2002). “Shaping<br />
the Complexity of a Design”, ASME International Mechanical Engineering Congress<br />
Exposition, 17-22 November 2002, New Orleans, Louisiana, USA.<br />
Roth, N., Lettice, F. and Evans, S. (2002). “Measurement of Knowledge Reuse and<br />
Invention in New Product Development”, 8th International Conference on Concurrent<br />
Engineering, 17-19 June 2002, Rome, Italy.<br />
Roth, N., Lettice, F., Evans, S. and Prieto, J. (2005). “Improving knowledge reuse<br />
and Invention in New Product Development through Performance Management”, 3rd<br />
International Conference on Theory and Practice in Performance Measurement, 17-<br />
19 July 2002, Boston, USA.<br />
Rowe, A., Smart, P., Tranfield, D. R., Levene, R. J., Corley, J. and Deasley, P. J.<br />
(2002). “Exploring design for serviceability in construction: a case for relationship<br />
management in a web of networks”, 9 th EUROMA Conference on Operations<br />
Management and the New Economy, 2-4 June 2002, Copenhagen, Denmark.<br />
Souchoroukov, P., Roy, R. and Mishra, K. “2002). “Data and information in cost<br />
estimating”, Conference of the Society of Cost Estimating Analysis, 11-14 June<br />
2002, Phoenix, Arizona, USA.<br />
Stephenson, D. J. and Jin, T. (2002). “Thermal analysis on the cylindrical grinding in<br />
HEDG mode”, 5th International Conference on Behaviour of Materials in Machining,<br />
12-13 November 2002, Chester, UK.<br />
Strutt, J. E., Hall, P. L., Georgiou, S., Jones, H., Locker, G., Bevan, D. and Morris, J.<br />
(2002). “The Foresight Vehicle: Prescient Tools to Support the Development of<br />
Reliable Automotive Products”, The Society of Automotive Engineers World<br />
Congress, 1-7 March 2002, Detroit, USA.<br />
Strutt, J. E., Hall, P. L., Georgiou, S., Jones, D. H., Locker, G., Bevan, D., Morris J.<br />
and Macdonald-Bradley, C. (2002). “Prescient Tools to Support the Design of<br />
Reliable Automotive Products”, The Society of Automotive Engineers World<br />
Congress, 1-7 March 2002, Detroit, USA.<br />
Tranfield, D. and Denyer, D. (2002). “An Evidence-based Approach for Management<br />
Research”, ”, 62 nd Annual Meeting of the Academy of Management, 9-14 August<br />
2002, Denver, CO, USA.<br />
Van der Zwan, F. M. and Bhamra, T. A. (2002). “Developing and offering<br />
sustainable solutions: report on a cross-industry exploration of integrated solutions”,<br />
Managing Sustainable Products Conference, October 2002, London, UK.<br />
Whicker, L., Bernon, M., Mena, C. and Templar, S. (2002). “Visualising costs in the<br />
food and drink supply chain”, 9 th EUROMA Conference on Operations Management<br />
and the New Economy, 2-4 June 2002, Copenhagen, Denmark.<br />
76