aqua-traxx - Agro Pataki

C O N T E N T STape and DriplineImpact SprinklersAQUA-TRAXX 4VIBRO-MIST 25AQUA-TRAXX PC 11DRIP IN PC 13DRIP IN CLASSIC 15Fittings for AQUA-TRAXX and DRIP IN 16Emitters/SprayersMini SprinklersEURO KEY CLASSIC 19EURO PLUS PC 20NGE AL 21NGE SF 22BLACK SPIDER 23CAPILLARY LINE STAKES 24CENTURION 24VIBRO FLO 26ELITE 26ROTA ONE 27ROTA PIVOT 28ASSEMBLY EXAMPLES 29AND CODESWb VI CLASSIC 31Wb VI PC 33BROWING B500 34ROTO FRAME 34

FiltersFertigationFILTRATION: USEFUL CONCEPTS 35FILTER SERIES LAMA 35FILTER SERIES F20/F25/F32/F40 37MAZZEI INJECTORS 48MAZZEI AIRJECTION INJECTORS 52MAZZEI RAINBOW INJECTORS 53XD FILTERS 38SD FILTERS 39ASA 100 39ValvesAccessoriesOVAL-V 41AIR RELEASE VALVE 43MICRO-FITTINGS 54PUNCHERS 54MICROTUBE 54PROMOTIONAL ITEMS 55TORO AG IRRIGATION LITERATURE 55ControllersIRRITROL DC 44MULTI PROGRAM 44FILCOM 45SATELLITE 46

T A P E A N D D R I P - L I N EApplicationsAQUA-TRAXX ®• Aqua-TraXX ® tape is ideal for irrigating:- Shallow rooted row crops(Strawberries, Lettuce, Cauliflower, Cabbage, Celery).- Moderate to deep rooted row crops(Tomatoes, Melons, Watermelons, Cucumbers, Sweetpepper, Pumpkins, Cotton).- Perennial row crops:(Artichokes, Asparagus, Tobacco).- Vineyards, Orchards, Nursery.- Officinal crops.• Aqua-TraXX ® is generally ideal for irrigating crops that areadvantaged by the maintenance of a dry foliage.Features• Aqua-TraXX ® is stronger, longer lasting, more efficient andmore reliable. Resilience and versatility favour easyinstallation (saving time and work) with less risk ofdamaging the product.• Aqua-TraXX ® is easy to recognise by its double blue stripe.• Aqua-TraXX ® is constructed in a single extrusion. Noseams, burrs or welding.• Highly resistant to blockage. Wide section outlet made bylaser. Lots of holes for each single dripper (30cm spacing)ensure a constant output and uniform water flow.• The path configuration is so precise that it gives anexcellent Cv and a true turbulent flow.• Aqua-TraXX ® is available in following individual emitterflow rates:- 1,41 l/h @0,7 bar- 1,14 l/h @0,7 bar- 0,87 l/h @0,7 bar- 0,64 l/h @0,7 bar- 0,57 l/h @0,7 bar• Wall Thickness: 0,127-0,15-0,20-0,25-0,30-0,38 mm• Internal diameter: 16 m and 22 mm• If the soil is infested with insects which can damage thetube then some form of soil treatment must be considered.• To prevent clogging, flush out the main and secondarylines before connecting Aqua-TraXX ® .• Buried Aqua-TraXX ® should be pressurised within 24 hoursto prevent flow restriction by the soil compaction.• Only use water soluble fertilisers and flush the lines of anydeposits before terminating irrigation.• It is advisable to mount vacuum breaker valves on thesubmains to avoid the possibility of impurities beingsucked back through the outlets of the Aqua-TraXX ®during shutdown of the system.Suggestions for Aqua-TraXX ®Systems FiltrationFor water rich in organic substances it is recommended thatsand filters with a grain size of 0,5 - 1,2 mm are used followedby mesh or disc safety filters, in all cases.Mesh or disc filters with a filtering capacity corresponding tothe type of Aqua-Traxx ® used could be sufficient in the case ofwell water.For greater detail about the mesh/micron correlation pleasecontact our engineering office.Futher information concerning the filtration can also be foundin the Aqua-Traxx ® manual.Blue stripes upLaser slitoutletAquaTraXX ® Emitter* (detail)Water flowTurbolentflow pathEmitter spacingWater inletfiltersInstallation• The double “blue” stripe must face upwards for warrantyvalidity.• Aqua-TraXX ® can be buried, laid under black plastic film orinstalled on the ground.• During installation it must not be pulled, cut, perforated orscuffed.* Indicative drawningEmitter Lenght4La I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.

WallthicknessInternaldiameterInlet pressure (bar)min maxIndividual emitterFlow rate @ 0,7 barl/h l/h l/h l/h l/hReellenghtDimension(Ø x h)5mil - 0,127 mm 5/8” - 16 mm 0,3 bar 0,7 bar 1.41 1.14 0.87 0.64 0.57 4200 m 55cm x 28cm6mil - 0,15 mm 5/8” - 16 mm 0,3 bar 0,8 bar 1.41 1.14 0.87 0.64 0.57 3048 m 55cm x 28cm8mil - 0,20 mm 5/8” - 16 mm 0,3 bar 1,0 bar 1.41 1.14 0.87 0.64 0.57 2286 m 55cm x 28cm10mil - 0,25 mm 5/8” - 16 mm 0,3 bar 1,0 bar 1.41 1.14 0.87 0.64 0.57 1828 m 55cm x 28cm12mil - 0,30 mm 5/8” - 16 mm 0,3 bar 1,0 bar 1.41 1.14 0.87 0.64 0.57 1554 m 55cm x 28cm15mil - 0,38 mm 5/8” - 16 mm 0,3 bar 1,0 bar 1.41 1.14 0.87 0.64 0.57 1220 m 55cm x 28cm8mil - 0,20 mm 5/8” - 16 mm 0,3 bar 1,0 bar 1,14 250 m 39,5cm x 8,2cm8mil - 0,20 mm 7/8” - 22 mm 0,3 bar 0,7 bar 1.41 1.14 0.87 0.64 0.57 1828 m 55cm x 28cm10mil - 0,25 mm 7/8” - 22 mm 0,3 bar 1,0 bar 1.41 1.14 0.87 0.64 0.57 1341 m 55cm x 28cmPart NumberEmitter (1,41 l/h)OutletSpacing(cm)Individual emitterflow rate (l/h)@0,55 bar @0,7 barFlow rateper meter (l/h/m)@0,55 bar @0,7 barRAXxx0884-yyy 20 1,29 1,41 6,45 7,05RAXxx1256-yyy 30 1,29 1,41 4,30 4,70Emitter (1,14 l/h)RAXxx04134-yyy 10 1,02 1,14 10,02 11,40RAXxx0867-yyy 20 1,02 1,14 5,1 5,7RAXxx1245-yyy 30 1,02 1,14 3,4 3,8RAXxx1634-yyy 40 1,02 1,14 2,55 2,85Emitter (0,87 l/h)RAXxx0667-yyy 15 0,76 0,87 5,1 5,7RAXxx0851-yyy 20 0,76 0,87 3,80 4,35RAXxx1234-yyy 30 0,76 0,87 2,55 2,85RAXxx1626-yyy 40 0,76 0,87 1,90 2,18RAXxx2417-yyy 60 0,76 0,87 1,27 1,45Emitter (0,64 l/h)RAXxx0650-yyy 15 0,57 0,64 3,80 4,35RAXxx1225-yyy 30 0,57 0,64 1,90 2,13Emitter (0,57 l/h)RAXxx0834-yyy 20 0,49 0,57 2,55 2,85RAXxx1222-yyy 30 0,49 0,57 1,64 1,9RAXxx1617-yyy 40 0,49 0,57 1,27 1,42RAXxx2411-yyy 60 0,49 0,57 0,82 0,95Minimumfiltrationrequired(1,41 -1,14 l/h)Codes Aqua-TraXX ®X Denotes internal diameter: 5 for 5/8” (16 mm) or 7 for 7/8” (22 mm);xx Denotes wall thickness in milyyy Denotes reel lenght in FT/10RA 5 08 08 34 - 750Aqua-TraXX ® Model(0,87 - 0,86 -0,64 l/h)Reel lenghtin FT/10*Flow rate g/min/100 ft@ 0.55 bar8” emitter spacing 20 cm8 mil wall thickness(0,20 mm)Internal diameter 5/8”(16 mm)Ø(0,57 l/h)Mesh 120-140 140-150 180-200Micron 120 115 85hT A P E A N D D R I P - L I N E* Excluding 5 mil where - 42 indicated 4200 m and short reels where - 2,5 indicates 250 mI.S.E. S.r.l.may change product specificationswithout prior notice and without liability5

T A P E A N D D R I P - L I N EAQUA-TRAXX ®ø 5/8” (16 mm)1,41 l/h P E R E M I T T E R @ 0,7 barRA5XX0884-yyy20 cmPerformance dataThe tables below show the maximum length (in meters) of thelines according to the type of dripper,the spacing between drippers,the inlet pressure, the efficiency required (EU 85% or90%) and the slope of the land (+ for a downward gradient).The complete product code is obtained by substituting the“XX” with the wall thickness required (i.e. 05, 06, 08 and 10mil) and the “yyy” with reel lenght required.To find the recommended maximum length:1. Find the series of tables referring to the individual emitterflow rate type selected (1,41-1,14-0,87-0,64-0,57 l/h).2. From these tables select the desired spacing betweendrippers.3. Within this table select the slope and the required inletpressure. The intersect of these two figures will give themaximum length of the line in meters for an emissionuniformity (EU) of 85% and 90% respectively.Caution:When calculating the recommended maximum length the maximumoperating pressure limits must be respected for the variouswall thicknesses.For example, Aqua-TraXX ® 5 mil must not be considered forpressures over 0,7 bars.Design programsAsk for the software to design your Aqua-TraXX ® system youwill find all the data necessary to optimise the use of the Aqua-TraXX ® .Legend of the design parametersEA = Application EfficiencyEA =q m / q a ;EU = Emission Uniformity (Expressed asa decimal)EU = (1- 1.27 CV/√n ) x EAq m = Minimum flow rateq a = Average flow rate (design rating)CV = Co-efficient of variationn = If the calculation gives 0,7 emitters per plant the value1 will always be inserted in the formula.bar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 73 50 98 73 138 110 167 135 175 141 175 1380,6 80 56 104 78 139 110 165 134 175 141 176 1410,7 87 62 108 82 139 111 163 132 173 141 178 1420,8 91 66 104 85 140 111 162 130 173 139 177 1430,9 96 71 115 89 140 111 161 129 173 139 177 1431,0 99 73 117 90 141 112 160 128 171 137 176 142RA5XX1256-yyy30 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 80 53 116 87 180 143 222 179 228 183 222 1680,6 90 61 124 92 180 143 220 177 230 185 227 1840,7 99 69 131 98 181 144 218 175 229 185 230 1840,8 106 74 137 103 181 144 216 174 229 185 232 1850,9 112 80 141 106 182 145 214 172 228 185 232 1871,0 117 85 145 110 183 145 213 171 227 183 232 1871,14 l/h P E R E M I T T E R @ 0,7 barRA5XX04134-yyy10 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 62 44 78 59 101 81 119 96 127 102 129 1040,6 67 49 82 62 102 81 118 94 126 101 129 1040,7 71 52 85 65 102 81 117 93 125 100 129 1040,8 74 55 87 67 103 81 115 93 124 99 128 1030,9 77 58 88 69 103 82 115 92 123 98 127 1031,0 79 60 90 70 103 82 114 91 122 98 126 102RA5XX0867-yyy20 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 77 51 107 79 159 126 195 157 203 163 200 1550,6 86 59 115 85 160 127 193 155 203 163 203 1610,7 93 65 120 90 161 127 191 153 202 163 204 1630,8 99 71 125 94 161 128 189 152 202 162 205 1650,9 104 75 128 98 162 128 188 151 200 161 205 1651,0 109 79 131 101 162 129 186 149 199 160 205 165The above data may vary according to test conditions.* Check AquaFlow program.6I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

RA5XX1245-yyy30 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 83 54 126 89 207 164 260 209 262 207 251 169*0,6 95 63 136 99 208 165 257 207 265 212 259 1970,7 105 71 144 106 209 166 255 205 266 214 264 2060,8 113 78 151 112 210 166 253 203 266 214 266 2110,9 121 84 157 117 210 167 251 201 265 214 268 2141,0 127 90 161 122 211 167 249 200 265 213 269 215RA5XX1634-yyy40 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 87 55 139 96 250 198 316 254 312 239 391 52*0,6 100 65 152 108 251 199 315 254 318 251 304 198*0,7 112 74 163 117 252 200 313 252 321 256 312 234*0,8 122 82 171 125 253 200 310 250 322 258 317 2460,9 132 89 178 132 253 201 308 247 322 259 321 2531,0 140 96 185 138 254 202 306 245 322 259 323 257RA5XX1234-yyy30 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 86 55 138 96 250 198 316 255 312 240 290 52*0,6 100 65 152 108 251 199 315 253 318 251 304 197*0,7 112 73 162 117 251 200 312 251 321 256 312 234*0,8 122 82 171 125 253 201 310 249 322 258 317 2460,9 131 89 179 132 253 201 308 247 322 259 321 2531,0 140 96 185 138 254 201 306 246 322 259 323 257RA5XX1625-yyy40 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 89 56 150 101 301 239 383 308 367 258 325* 50*0,6 104 66 167 115 302 240 383 308 378 289 351 62*0,7 117 76 180 127 304 241 381 307 384 301 365 75*0,8 130 85 192 137 304 242 379 306 387 308 375 274*0,9 141 93 202 146 305 243 377 304 389 311 381 2911,0 151 102 210 154 306 243 375 302 390 313 386 301T A P E A N D D R I P - L I N E0,87 l/h P E R E M I T T E R @ 0,7 bar0,64 l/h P E R E M I T T E R @ 0,7 barRA5XX0667-yyy15 cmRA5XX0650-yyy15 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 77 51 107 79 159 126 195 157 203 163 200 1550,6 86 59 115 85 160 127 193 155 203 163 203 1610,7 93 65 120 90 161 127 191 153 202 163 204 1630,8 99 71 125 94 161 128 189 152 202 162 205 1650,9 104 75 128 98 162 128 188 151 200 161 205 1651,0 109 79 131 101 162 129 186 149 199 160 205 165bar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 81 53 120 86 192 152 239 193 244 194 236 172*0,6 92 62 130 92 193 153 237 191 246 197 242 1870,7 101 69 137 101 193 154 235 189 246 198 245 1940,8 109 76 143 107 194 154 232 187 245 198 247 1970,9 116 82 148 112 195 154 230 185 245 197 248 1991,0 122 87 152 115 195 155 229 183 244 196 249 200RA5XX0850-yyy20 cmRA5XX1225-yyy30 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 81 53 120 86 192 152 239 193 244 194 236 172*0,6 92 62 130 92 193 153 237 191 246 197 242 1870,7 101 69 137 101 193 154 235 189 246 198 245 1940,8 109 76 143 107 194 154 232 187 245 198 247 1970,9 116 82 148 112 195 154 230 185 245 197 248 1991,0 122 87 152 115 195 155 229 183 244 196 249 200bar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 89 56 150 101 301 239 383 308 367 258 325* 50*0,6 104 66 167 115 302 240 383 308 378 289 351 62*0,7 117 76 180 127 304 241 381 307 384 301 365 75*0,8 130 85 192 137 304 242 379 306 387 308 375 274*0,9 141 93 202 146 305 243 377 304 389 311 381 2911,0 151 102 210 154 306 243 375 302 390 313 386 301The above data may vary according to test conditions.* Check AquaFlow program.The above data may vary according to test conditions.* Check AquaFlow program.I.S.E. S.r.l.may change product specificationswithout prior notice and without liability7

T A P E A N D D R I P - L I N E0,57 l/h P E R E M I T T E R @ 0,7 barAQUA-TRAXX ®RA5XX0834-yyy20 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 86 55 138 96 250 198 316 255 312 240 290 51*0,6 100 64 152 107 251 199 315 253 318 251 304 197*0,7 112 74 162 117 252 200 313 252 321 256 312 234*0,8 122 82 171 125 253 201 310 250 322 258 317 2460,9 131 89 178 132 253 201 308 247 322 259 321 2531,0 140 96 185 138 254 202 306 246 322 259 323 257RA5XX1222-yyy30 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 89 56 154 103 325 258 414 332 391 81* 331* 50*0,6 105 66 173 118 326 259 415 334 404 303* 369* 61*0,7 119 76 188 131 328 260 414 333 412 320 388* 73*0,8 132 86 200 142 329 261 412 332 417 329 400 272*0,9 144 95 211 152 329 262 410 330 420 334 408 304*1,0 155 103 220 160 330 262 407 328 422 337 414 318RA5XX1617-yyy40 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 91 56 163 106 392 311 498 395 449 77* 104* 49*0,6 107 67 186 124 393 312 501 402 473 96* 397* 60*0,7 123 78 204 139 395 313 502 404 487 358 440* 71*0,8 138 88 221 153 396 315 502 404 496 381 462* 82*0,9 152 98 234 165 397 316 500 403 502 393 477* 96*1,0 164 107 246 176 399 316 499 402 506 401 487* 345*ø 7/8” (22 mm)1,14 l/h P E R E M I T T E R @ 0,7 barRA7XX0867-yyy20 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 88 55 146 99 280 223 357 287 346 256* 313* 50*0,6 102 65 161 112 282 224 356 287 354 275 333 63*0,7 115 75 174 124 283 225 354 285 359 284 345 241*0,8 127 84 184 133 284 225 352 283 362 289 353 266*0,9 137 92 193 141 285 226 350 281 363 291 358 2771,0 147 100 200 148 285 227 347 279 363 292 361 284The above data may vary according to test conditions.* Check AquaFlow program.8I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

RA7XX1245-yyy30 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 90 56 160 105 365 290 465 370 428 78* 106* 49*0,6 106 67 181 122 367 291 467 375 447 308* 392* 60*0,7 122 77 198 136 368 292 467 376 458 347* 422* 71*0,8 136 87 213 149 369 293 466 376 465 362 439 84*0,9 149 96 226 160 370 294 464 374 470 371 450 305*1,0 161 105 237 170 372 295 462 372 473 376 459 340*RA7XX1634-yyy40 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 91 56 168 108 440 349 556 436 481* 75* 102* 49*0,6 109 67 193 126 442 351 563 448 517 93* 127* 59*0,7 125 78 214 143 444 352 566 454 537 114* 462* 69*0,8 140 89 232 158 445 354 567 456 550 408* 499* 81*0,9 155 99 248 172 447 355 566 456 559 430 521 931,0 169 109 262 184 447 356 564 454 565 442 536 106RA7XX1625-yyy40 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 92 57 174 110 530 421 659 497* 162* 74* 99* 49*0,6 110 68 202 130 533 423 673 527 580* 90* 122* 59*0,7 127 78 227 148 535 425 680 541 619 108* 147* 69*0,8 143 89 250 166 537 426 684 547 642 127* 524* 79*0,9 159 100 269 182 538 428 686 551 658 465* 583* 90*1,0 175 110 287 196 540 429 686 552 669 502* 612* 101*0,57 l/h P E R E M I T T E R @ 0,7 barRA7XX0834-yyy20 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 91 56 168 108 440 349 556 436 418* 75* 102* 49*0,6 108 67 193 126 442 351 563 448 517 93* 127* 59*0,7 125 78 214 143 444 352 566 454 537 114* 462* 69*0,8 140 88 232 158 445 354 567 456 550 408* 499* 81*0,9 155 98 248 172 447 355 566 456 559 430 521* 93*1,0 169 108 262 184 448 356 564 455 565 442 536* 106*T A P E A N D D R I P - L I N E0,87 l/h P E R E M I T T E R @ 0,7 barRA7XX0850-yyy20 cmRA7XX1222-yyy30 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 90 56 156 104 338 268 431 345 404 79* 326* 49*0,6 105 66 175 119 340 270 432 347 419 308* 378* 60*0,7 120 76 191 133 341 271 432 348 428 330 399 72*0,8 134 86 205 144 342 272 430 346 433 341 413 86*0,9 146 95 216 155 343 272 428 345 436 347 422 309*1,0 157 104 226 164 344 273 426 343 439 351 429 327*bar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 92 57 176 110 572 454 704 515* 157* 74* 99* 48*0,6 110 68 205 131 575 457 722 559 595* 89* 120* 59*0,7 127 79 232 150 578 458 732 578 650 106* 144* 69*0,8 144 89 255 168 579 460 738 589 681 124* 171* 79*0,9 160 100 277 185 581 461 741 594 701 145* 595* 89*1,0 176 111 296 200 583 463 742 596 715 517* 640* 100*RA7XX1234-yyy30 cmRA7XX1617-yyy40 cmbar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 91 56 168 108 440 349 556 436 481* 75* 101* 49*0,6 108 67 193 126 442 351 563 448 517 93* 127* 59*0,7 125 78 214 143 444 352 566 454 537 114* 462* 69*0,8 140 88 232 158 445 354 566 456 550 408* 499* 81*0,9 155 98 248 172 447 355 566 456 559 429 521* 93*1,0 169 108 262 184 448 355 564 454 565 442 536* 106*bar -2% -1% 0 1% 2% 3%85% 90% 85% 90% 85% 90% 85% 90% 85% 90% 85% 90%0,5 93 57 317 208 690 548 821 158* 151* 73* 98* 48*0,6 111 68 293 191 693 551 852 619* 188* 88* 119* 58*0,7 128 79 241 153 696 553 871 669 692* 104* 140* 68*0,8 146 90 268 173 699 555 883 693 767* 120* 163* 78*0,9 163 101 293 191 701 556 891 707 805* 138* 188* 88*1,0 180 112 317 208 703 558 895 715 832* 157* 216* 98*The above data may vary according to test conditions.* Check AquaFlow program.The above data may vary according to test conditions.* Check AquaFlow program.I.S.E. S.r.l.may change product specificationswithout prior notice and without liability9

T A P E A N D D R I P - L I N EAQUA-TRAXX ® 10Injection tool indicative drawing for buried or laid AquaTraXX ®installationDiam.A-A SectionB-B SectionI.S.E. S.r.l.may change product specificationswithout prior notice and without liability

AQUA-TRAXX ® PCApplicationsPressure compensatingAqua-TraXX ® PC is ideal:• to irrigate crops in difficult topographical conditions• in installations requiring long lateralsFeatures• Pressure compensating (ISO 9260-9261):flow exponent X = 0,2• Coefficient of variation ≤ 0,3% for all emitters• Seamless construction; no more splitting at the seam• Ultra high strength and flexibility• Multiple laser slit outlets• Blue stripes, signature of quality and useful installation aid• Turbulent flow path• Two flow rates: 0,76 l/h and 1,02 l/h individual emitterflow rate 0,7 bar• Wall tickness: 0,20; 0,25; 0,38 mmInstallation• The double “blue” stripe must face upwards for warrantyvalidity• Aqua-TraXX ® PC can be buried, laid under black plasticfilm or installed on the ground• During installation it must not be pulled, cut, perforated orscuffed• If soil is infested with insects which can damage the tubethen some form of soil treatment must be considered• To prevent blockages, flush out main and secundary linesbefore connectng tape• Buried Aqua-TraXX ® PC should be pressured within 24hours to prevent flow restriction by soil compation• Only use water soluble fertilisers and flush the lines of anydeposits before terminating irrigation• It is advisable to mount vacuum breaker valves on thesubmains to avoid the possibility of impurities beingsucked back through the outlets of the Aqua-TraXX ® PCduring shutdown of the systemEmitter flow vs. Pressureflow rate (l/h)1,210,80,60,40,20Codes Aqua-TraXX ®PCEAP 5 10 08 34 - 750Reel lenght in FT/10Flow rate (g/min/100 p) @ 0.7 barSpacing 8” (20 cm)Wall thickness 10 mil of inch (0,25 mm)Diameter 5/8” (16 mm)Pressure compensantingAqua-TraXX PC0,27 0,41 0,55 0,69 0,83 0,97 1,10 1,24 1,38 1,52 1,65 1,79Flow rate Aquatraxx PC 0,76 l/hFlow rate Aquatraxx PC 1,02 l/hpressure (bar)T A P E A N D D R I P - L I N EFiltration: it is required a minimum filtration of 200 mesh (74 micron)I.S.E. S.r.l.may change product specificationswithout prior notice and without liability11

T A P E A N D D R I P - L I N EAQUA-TRAXX ® PCPressure compensatingPerformance chartWallthicknessDiameterInlet pressuremin maxIndividual emitterflow rate at @ 0,7 barReellenghtWeight(Kg)Reel dimensions(Ø x h)▼▼l/h l/h Kg8 mil 5/8” (16 mm) 0,3 bar 1,10 bar 0,76 1,02 2286 28,57 55 cm x 28 cm10 mil 5/8” (16 mm) 0,3 bar 1,40 bar 0,76 1,02 1828 27,21 55 cm x 28 cm15 mil 5/8” (16 mm) 0,3 bar 1,75 bar 0,76 1,02 1220 27,66 55 cm x 28 cm10 mil 7/8” (22 mm) 0,3 bar 1,25 bar 0,76 1,02 1341 29,50 55 cm x 28 cm15 mil 7/8” (22 mm) 0,3 bar 1,55 bar 0,76 1,02 914 27,13 55 cm x 28 cmØhModels chartCodesDripperspacing(cm)Flow ratefor each emitter (l/h)@ 0,7 barFlow rateper meter (l/h/m)@ 0,7 barEAPXxx0667 15 0,76 5,07EAPXxx0850 20 0,76 3,80EAPXxx1234 30 0,76 2,53EAPXxx1625 40 0,76 1,90EAPXxx1822 45 0,76 1,69EAPXxx2417 60 0,76 1,27EAPXxx0690 15 1,02 6,80EAPXxx0867 20 1,02 5,10EAPXxx1245 30 1,02 3,40EAPXxx1634 40 1,02 2,55EAPXxx1830 45 1,02 2,27EAPXxx2422 60 1,02 1,70Maximum distance*EAP5XX0867-yyySpacing 20cm - 0,76 l/h @ 0,55 barInlet pressure (bar)Slope 0% EU(%) 0,69 0,82 0,97 1,10 1,2494 122 130 137 137 13792 145 152 160 160 16790 *167 175 183 183Slope 3% EU(%) 0,69 0,82 0,97 1,10 1,2494 160 167 167 175 17592 190 198 198 198 20690 *213 213 221 221Slope 6% EU(%) 0,69 0,82 0,97 1,10 1,2494 30 38 46 53 17592 183 198 198 206 21390 206 221 229 236 236Maximum distance*EAP5XX0850-yyySpacing 20cm - 1,02 l/h @ 0,55 barInlet pressure (bar)EAP5XX1234-yyySpacing 30cm - 0,76 l/h @ 0,55 barInlet pressure (bar)EAP5XX1245-yyySpacing 30cm - 1,02 l/h @ 0,55 barInlet pressure (bar)Slope 0% EU(%) 0,69 0,82 0,97 1,10 1,24 0,69 0,82 0,97 1,10 1,24 0,69 0,82 0,97 1,10 1,2494 145 152 160 160 167 193 200 208 214 219 159 165 171 176 18092 175 183 190 198 206 233 242 251 259 265 192 199 207 212 21890 190 206 213 221 221 258 269 279 286 295 213 221 230 236 242Slope 3% EU(%) 0,69 0,82 0,97 1,10 1,24 0,69 0,82 0,97 1,10 1,24 0,69 0,82 0,97 1,10 1,2494 190 198 206 213 213 64 83 264 276 285 198 211 222 229 23492 229 236 244 251 251 301 315 325 334 340 248 257 265 271 27790 *259 267 274 282 336 347 358 367 374 274 283 291 297 303Slope 6% EU(%) 0,69 0,82 0,97 1,10 1,24 0,69 0,82 0,97 1,10 1,24 0,69 0,82 0,97 1,10 1,2494 30 38 46 53 53 29 35 42 48 55 30 36 43 50 5792 69 229 244 251 267 64 78 97 118 333 66 237 260 272 28290 251 267 274 282 290 115 169 357 371 392 270 285 298 307 315* For further information ask for our Aqua Flow program or contact our technical service.12I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

ApplicationsDRIP IN ® PCPressure compensatingIdeal to irrigate crops in difficult topographical conditions, varyingwater pressures and in installations requiring long laterals.FeaturesDrip In PC (pressure compensating) dripline has a built in flowregulated emitter that provides a constant discharge over apressure range of 0,5 bar to 4,2 bar. The emitter is installed inthe tube during the extrusion process.This prevents damage and loss of dripper and reduces labourand installation costs.Advantages• Highly resistant to clogging(filtration is, in any case, required)• The flow rates never exceeds nominal flow rate• Drip In PC is the only dripline featuring dual-opposed exitholes to prevent re-entry of dirty during vacuum phase atthe end of each irrigation cycle• Drip In PC emitter body is made from polyethylene resins.The diaphragm is made from silicon. This combination willwithstand acids down to pH2 as well as chemicals,fertilisers and chlorine• The emitters performance is not affected by changes inwater temperatures.• Five years’ warranty.flushingregulatingT A P E A N D D R I P - L I N ECodes Drip In ®PCEHD PC E XX XX - XXEmitter spacing (cm)Dripper (l/h)Ø (mm)Pressure compensatingI.S.E. S.r.l.may change product specificationswithout prior notice and without liability13

T A P E A N D D R I P - L I N E543210DRIP IN ® PCPressure compensatingEmitter discharge rate vs. pressureflow rate (l/h)Performance chart4,0 3,9 4,0 4,03,0 3,1 3,1 3,12,4 2,4 2,4 2,42,0 1,9 2,0 1,91,8 1,8 1,8 1,81 2 3 4inlet pressure (bar)Versatility• Drip In PC is highly versatile• Emitters are available with 5 different flow rates(1,8-2,0-2,4-3,0-4,0 l/h) and can be insertedinto two hose sizes:- 16 mm (I.D. 14 mm / O.D. 16,2 mm)- 20 mm (I.D. 18 mm / O.D. 20,4 mm)• Unlimited spacing options plus group spacing providegreater design flexibility• Drip In PC can be used in permanent installation or rowcrops where it is laid out and re-rolled easily• Standard reel-length:- 300 m per 20 mm- 400 m per 16 mm• Drip In PC may be hung on wire, laid on the surface or buried(SSDI).Diameter(mm)Wall thickness(mm)Emitter(l/h)Spacing(cm)Reel Lenght(m)Weight(Kg)Reel dimensions(Ø x h)I.D. 14 / O.D. 16,2 1,1 1,8; 2,0; 2,4; 3,0; 4,0* 30; 40; 50; 60; 75; 100 400 21 83 cm x 30 cmI.D. 18 / O.D. 20,4 1,2 1,8; 2,0; 2,4; 3,0; 4,0 30; 40; 50; 60; 75; 100 300 21 83 cm x 30 cmMax recommended Drip Line LengthDrip In PC 16 mm (I.D. 14 mm / O.D. 16,2 mm)InletEmitter (cm)pressure 30 40 50 60 75 1001,0 bar 54 50 44 40 33 69 64 57 52 42 84 78 70 63 52 99 92 82 74 61 119 111 98 89 73 150 140 125 113 931,7 bar 83 77 69 62 51 109 104 89 81 66 130 121 108 98 81 153 142 126 115 94 184 171 153 138 114 233 217 193 175 1442,4 bar 100 93 83 75 62 130 121 108 98 80 158 147 131 119 98 185 172 153 139 114 224 208 185 168 138 283 263 234 212 1753,0 bar 117 104 93 84 69 143 130 121 109 90 177 164 146 133 109 207 192 171 155 128 249 232 207 187 154 316 294 232 237 1953,5 bar 119 112 100 91 74 156 145 129 117 96 190 177 157 143 117 222 207 184 167 137 268 249 222 201 166 339 315 281 255 2104,0 bar 127 119 106 96 79 166 154 137 124 102 201 187 167 151 124 236 219 195 177 146 285 265 236 214 176 360 335 298 270 223Flow rate l/h 1,8 2,0 2,4 3,0 4,0 1,8 2,0 2,4 3,0 4,0 1,8 2,0 2,4 3,0 4,0 1,8 2,0 2,4 3,0 4,0 1,8 2,0 2,4 3,0 4,0 1,8 2,0 2,4 3,0 4,0Drip In PC 20 mm (I.D. 18 mm / O.D. 20,4 mm)InletEmitter (cm)pressure 30 40 50 60 75 1001,0 bar 95 89 79 72 59 122 113 101 91 75 126 136 121 110 91 170 158 141 127 105 202 188 168 152 125 252 235 209 190 1561,7 bar 147 137 122 111 91 183 176 156 142 117 227 211 188 170 140 263 245 218 197 163 314 292 260 235 194 391 364 324 294 2422,4 bar 179 167 148 135 111 229 213 190 172 142 274 256 228 207 170 319 297 264 240 197 381 354 315 286 235 474 441 393 356 2933,0 bar 200 186 166 150 124 256 238 212 192 158 307 286 254 231 190 356 331 295 267 220 425 395 352 319 263 530 493 439 398 3273,5 bar 215 200 178 161 133 274 255 227 206 170 330 307 273 248 204 383 356 317 287 236 456 424 378 342 282 569 529 471 427 3524,0 bar 228 212 189 171 141 291 271 241 219 180 351 326 290 263 217 406 378 336 305 251 484 450 401 366 299 604 562 500 453 373Flow rate l/h 1,8 2,0 2,4 3,0 4,0 1,8 2,0 2,4 3,0 4,0 1,8 2,0 2,4 3,0 4,0 1,8 2,0 2,4 3,0 4,0 1,8 2,0 2,4 3,0 4,0 1,8 2,0 2,4 3,0 4,0Data refers to a minimum working pressure of 0,7 bars at line end. The above data may vary according test conditions.* 1,2 and 1,5 for Drip In PC 16 mm will be available soon.14I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

ApplicationsBuilt in emitters make Drip In the ideal dripline for quickdamage-free re-rolling through dense crops like tomatoes orcottons, providing convenient storage between season, pluseasy shipment and handling.FeaturesDrip In Classic is one piece jointless emitter enclosed tube. It isrugged, lightweight and very flexible. It can be laid out and rerolledeasily with no damage to in line emitters. Only the highestquality resins are used.Advantages• Highly clog resistant due to wide deep turbulent passageways and raise inlets (filtration is, in any case, required)• Extremely accurate flow rate due to high quality controlstandards• Reduced labour and installation cost. No hole punching, lostemitters or handling damage• Can’t separate because there are no clip-ons or connections• Lower friction loss due to jointless design, allows longer runsand fewer mainlines• Water pressure flushes dripline clean• Flow rate can be varied for crop requirements• For above and below ground applications• Emitter is factory spaced at regular intervals or by growerspecification for special orders• Five years’ warranty.VersatilityDRIP IN ® CLASSICNon pressure compensating• Drip In Classic is highly versatile• Emitter are available with different flow rates:- 16mm (1,5-2,0-3,0-4,0-8,0 l/h)- 20mm (1,5-2,0-4,0-8,0 l/h)and it can be inserted into two hose sizes:- 16 mm (I.D. 14 mm / O.D. 16,2 mm)- 20 mm (I.D. 18 mm / O.D. 20,4 mm)• Unlimited spacing options, plus group spacing providegreater design flexibility• Standard reel length:- 300 m per O.D. 20 mm- 400 m per O.D. 16 mmCodice Drip In ®EHDE XX XX - XXDrip In Classic 16mm max line lengthEmitterspacing (cm)Drip In Classic 20mm max line lengthEmitterspacing (cm)EmitterØ (mm)ClassicEmitter spacing (cm)Maximum Run for a Flow Variation ± 5%1,5 l/h 2,0 l/h 3,0 l/h 4,0 l/h20 * * * *30 * * * *40 110 m 77 m 59 m 50 m50 113 m 84 m 65 m 51 m60 138 m 96 m 74 m 65 m75 151 m 114 m 88 m 70 m90 178 m 130 m 100 m 80 m* For further information on these lengths, contact our technical service.Maximum Run for a Flow Variation ± 5%1,5 l/h 2,0 l/h 4,0 l/h20 * * *30 100 m * *40 166 m 120 m 75 m50 174 m 130 m 80 m60 207 m 150 m 95 m75 237 m 163 m 108 m90 275 m 177 m 125 m* For further information on these lengths, contact our technical service.T A P E A N D D R I P - L I N EPerformance chartØ(mm)Wall thickness(mm)For product availability, please contact your distributorEmitter(l/h)Spacing(cm)Reel length(m)Reel weight(Kg)Dimension(Ø x h)D.I. 13,8 / D.E. 16 1,1 1,5; 2,0; 3,0; 4,0; 8,0 30; 40; 50; 60; 75; 90 400 21 83 cm x 30 cmD.I. 17,6 / D.E. 20 1,2 1,5; 2,0; 4,0; 8,0 30; 40; 50; 60; 75; 90 300 21 83 cm x 30 cmI.S.E. S.r.l.may change product specificationswithout prior notice and without liability15

F I T T I N G SFITTINGSfor AquaTraXX and Drip InStarter for HDPE and Pvc from Ø 40 mm to Ø 110 mmFitting example:++ orHDPE/PVCIT-FGA668IT-FGA645IT-FVT 3957 AquaTraXX DRIP-INTapeIT-FGA645IT-FGA646IT-FVT3957IT-FVT3966IT-FGA6461IT-FGA6451IT-FGP668IT-FCP641IT-FCP6411IT-FGA638Starter 3/8” M for tape 16 mmStarter 3/4” M for tape 16 mmStarter Mini Valve 3/8” M for tape 16 mmStarter Mini Valve barbed 15 mm for tape 16 mmStarter 3/4” M for tape 22 mmStarter 3/8” M for tape 22 mmExpander gasket for Poly/PVC for starter 3/8” MStarter barbed for Aqua-TraXX for tape 16 mmStarter barbed for Aqua-TraXX for tape 22 mmStarter barbed 15 mm with rubber for tape 16 mmDrip InIT-FGA6191IT-FGA6192IT-FGP621IT-FGP622IT-FGT676IT-FHP661IT-FHP660Starter 3/8” M thread for Drip In 16 mmStarter 3/8” M thread for Drip In 20 mmStarter barbed 15 mm w/rubber for Drip In 16 mmStarter barbed 15 mm w/rubber for Drip In 20 mmTap 3/8” M for expander gasket for layflat grommetDrill cup Ø 18 mm for IT-FGP668Drill cup Ø 15 mm for starter barbed 15 mm16La I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.

Starter for LDPE from Ø 25 mm to Ø 32 mmFitting example:++ orLDPE IT-FGA06 AQUA-TRAXX DRIP-INF I T T I N G STapeIT-FGA06IT-FGA98IT-FGA637Starter 6 mm barbed for tape 16 mm (to use with puncher IT- FMP04)Grommet with rubber for tape 16 mmStarter barbed 10 mm for tape 16 mmDrip inIT-FGA619IT-FGA620IT-FMP45Starter barbed 10 mm for Drip In 16 mmStarter barbed 10 mm for Drip In 20 mmPuncher 7 mm for barbed starter 10 mmCouplingFitting example:or++ orAQUA-TRAXXDRIP-IN IT-FCC636 AQUA-TRAXX DRIP-INTapeIT-FCC636IT-FCC6361Coupling for Tape Ø 16 mmCoupling for Tape Ø 22 mmDrip InIT-FCC617IT-FCC618Coupling for Drip In Ø 16 mmCoupling for Drip In Ø 20 mmLa I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.17

F I T T I N G SFITTINGSforr AquaTraXX and Drip InStarter from Lay FlatFitting example:++ orLAY FLATIT-FGP655IT-FSP678IT-FGA645IT-FVT 3957 AQUA-TRAXX DRIP-INTapeIT-FGA645IT-FVT3957IT-FGA6451IT-FGA6461IT-FGP655IT-FSP675IT-FLP665IT-FPM664Starter 3/8” M for tape 16 mmThreaded valve 3/8” M for tape 16 mmStarter threaded 3/8” M for tape 22 mmStarter threaded 3/4” M for tape 22 mmGrommet threaded 3/8” M for tape for LayflatCoupling 3/8” F for Layflat for tape starterPuncher for LayflatSupport for Layflat fittings18La I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.

FeaturesEURO-KEYClassic Dripper• Turbulent flow path resists clogging• Removable cap for cleaning• Base lugs for dripperline stability: 2 l/h blue base, 4 l/hblack base, 8 l/h red base, 16 l/h brown base, 24 l/h greenbase• Spanner available (IT-DNK00)E M I T T E R SSpecifications• Recommended operating pressure range: 1,0 a 2,0 bar• Stable polypropylene and polyethylene material• 4 mm barbed inlet• Male exit offtake for 4x6 mm Micro-tube• CV ≤ 5%• Exponent = 0,5• A-class dripper in conformity with UNI 9260 norms.Euro-KeyCode Flow rate Disc 1.0 bar 1.25 bar 1.5 barIT-DNK02-2-BLUE 2 l/h White 2,0 l/h 2,4 l/h 2,8 l/hIT-DNK04-2 4 l/h Black 4,0 l/h 5,0 l/h 5,6 l/hIT-DNK08-2-RED 8 l/h Green 8,0 l/h 9,7 l/h 11,2 l/hIT-DNK16-2-MB 16 l/h Red 16,0 l/h 16,8 l/h 19,5 l/hIT-DNK24-2-GREEN 24 l/h Yellow 24,7 l/h 29,0 l/h 34,0 l/hLa I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.19

E M I T T E R SEURO-PLUSPressure CompensatingFeatures• Available in 4 and 8 l/h• Improved pressure compensation flow rate uniformity overa wide range of pressure variance is better than ever• Silicone diaphragm• Larger, self flushing, turbulent flow channel provideshigher resistance to plugging• Take apart feature permits fast, easy field inspection• Moulded-in stabilizing tabs at base• Spanner available (IT-DNK00)• CV ≤ 5%• A-class dripper, in conformity with UNI 9260 Norms.Euro-PlusSpecifications• Recommended operating pressure rangefrom 0,5 to 3,5 bar• 4 mm barbed inlet• Male exit offtake for 4x6 mm microtube.Codice Flow rate 1.0 bar 2.0 bar 3.0 bar 4.0 barIT-DPJ04-2 4 l/h 3,9 l/h 3,9 l/h 3,9 l/h -IT-DPJ08-2 8 l/h 7,6 l/h 7,9 l/h 8,1 l/h 8,35 l/h20La I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.

Applications• Especially suited for tank farming and other crops thatrequire very precise irrigation.FeaturesNGE ALPressure Compensatingwith Anti-leakage for nurseriesSpecifications• Flow rate: 2, 3, 4, 8 l/h• Recommended filtration: 115 micron• Pressure compensating range: from 1,0 bar to 4 bar• Opening pressure: 0,8 bar• Closing pressure: 0,24 bar for 2 l/h; 0,28 bar for 3 l/h;0,31 bar for 4 l/h; 0,35 bar for 8 l/h;• Max flow rate shift ± 5%• CV ≤ 3%.E M I T T E R S• High closing pressure• Pressure compensating• Low variation coefficient (CV)• Extensive labyrinth with turbulent flow that creates greatresistance to blockage• Anti-drainage device that closes the dropper and avoids:- loss loads for short irrigation fertirrigation cycle- pipe draining- water wastage• Silicone diaphragm• A-Class dripper, in conformity with UNI 9260 norms• Acid resistant, down to pH2.CodesDPC02-MA-ALDPC03-MA-ALDPC04-MA-ALDPC08-MA-ALNGE ALNGE AL 2 l/h with 4 mm male OfftakeNGE AL 3 l/h with 4 mm male OfftakeNGE AL 4 l/h with 4 mm male OfftakeNGE AL 8 l/h with 4 mm male OfftakeCodeModelPressure (bar)1,0 1,5 2,0 2,5 3,0 3,5 4,0DPC02-MA-AL NGE AL 2 l/h 1,97 l/h 2,02 l/h 2,08 l/h 2,07 l/h 2,01 l/h 1,94 l/h -DPC03-MA-AL NGE AL 3 l/h 2,96 l/h 3,01 l/h 2,98 l/h 3,00 l/h 3,02 l/h 3,05 l/h 3,06 l/hDPC04-MA-AL NGE AL 4 l/h 4,08 l/h 4,04 l/h 3,77 l/h 3,76 l/h 3,88 l/h 3,89 l/h 3,88 l/hDPC08-MA-AL NGE AL 8 l/h 7,95 l/h 8,22 l/h 8,10 l/h 8,10 l/h 8,03 l/h 8,03 l/h 7,81 l/hNGE AL Pressure Compensanting Dripper with anti-leakage for nurseries11,4Pressure compensating range9,5NGE AL 8 l/hFlow rate (l/h)7,65,73,81,9IRRIGATIONTIMENGE AL 4 l/hNGE AL 3 l/hNGE AL 2 l/h00,8 0,9 1,0 1,4 1, 7 2,1 2,4 2,8 3,1 3,5 3,8 4,1 4,1 3,8 3,5 3,1 2,8 2,4 2,1 1,7 1,4 1,0 0,7 0,6 0,4 0,35 0,31 0,28 0,24Pressure (bar)La I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.21

E M I T T E R SNGE SFPressure Compensating Self-flushingDripper for Open Field Applications• Recommended filtration: 120 micron• Pressure compensating range:- from 0,7 to 4 bar• Max flow rate shift ± 5%• CV ≤ 3%.Applications• Ideal for open field applications in difficult topographicalconditions.Features• Self-cleaning system in the depressurisation stage• Pressure compensating• Resistant against climatic changes• Low variation coefficient (CV)• Large tortuous path for turbulent flow to create a high anticlogging effect• Silicone diaphragm• A-Class dripper, in conformity with UNI 9260 norms• Acid resistant, down to pH2.Specifications• Rated fow rate: 2, 3, 4, 8 l/hCodesDPC02-DCDPC04-DCDPC08-DCDPC02-MADPC04-MADPC08-MANGE SFNGE SF 2 l/h with dust capNGE SF 4 l/h with dust capNGE SF 8 l/h with dust capNGE SF 2 l/h with 4 mm male OfftakeNGE SF 4 l/h with 4 mm male OfftakeNGE SF 8 l/h with 4 mm male OfftakeCode ModelPressure (bar)0,6 0,8 1,0 1,5 2,0 2,5 3,0 3,5 4,0DPC02-DC NGE SF 2 l/h 1,97 l/h 1,97 l/h 1,97 l/h 2,02 l/h 2,08 l/h 2,07 l/h 2,01 l/h 1,94 l/h -DPC04-DC NGE SF 4 l/h 3,60 l/h 3,90 l/h 4,08 l/h 4,04 l/h 3,77 l/h 3,76 l/h 3,88 l/h 3,89 l/h 3,88 l/hDPC08-DC NGE SF 8 l/h - 7,90 l/h 7,95 l/h 8,22 l/h 8,10 l/h 8,10 l/h 8,3 l/h 8,03 l/h 7,81 l/hNGE SF 2 l/h3.0Cleaning stage (instant)2.5Flow rate (l/h)2.01.51.00.5Closing stage (instant)0.04 3 2 1 0.5 0.15Pressure (bar)22La I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.

BLACK SPIDERAccessories for NGE AL (nurseries)Applications• Ideal for greenhouses, nurseries potted plants etc...• Ideal for situations where precise irrigation is required,such as tank farming, on rock wool, beads or other inertmaterials.E M I T T E R SFeaturesThe Black Spider is available in six versions: 4 outlets, 2outlets and 1 outlet, 60 cm or 80 cm longThe 4 outlets version is made up of a kit including:• 1 cross for 4 outlets with female socket for emitter with 4mm male exit off take• 4 drip point stakes, with internal turbulent flow path• 4 PEVA 3x5 mm flexible microtube (60 cm o 80 cm). TheKit is supplied fully assembledSpecifications• The flow rate of each single stake may differ according todifferent types of installation and materials used• Black Spider single outlet uses IPS0301BQ 90° barbedstake to avoid back-pressure problems withautocompensation decrasingPEVA: Mixture of polythylene and vinilacetate, it makespolyethylene more flexible.Don’t use with Euro-Key,Euro-Plus and Turbo-Plus.NGEEmitter NGECodesIT-DBS1BQ Black Spider-Kit 60 cm (1 outlet) - 90°IT-DBS2 Black Spider-Kit 60 cm (2 outlets)IT-DBS4 Black Spider-Kit 60 cm (4 outlets)IT-DBS1BQ-80 Black Spider-Kit 80 cm (1 outlet) - 90°IT-DBS2-80 Black Spider-Kit 80 cm (2 outlets)IT-DBS4-80 Black Spider-Kit 80 cm (4 outlets)DNS1 1 outlet manifold straight (180°)DNS1Q 1 outlet elbow(90°)DNS2 2 outlets manifold (Tee)DNS4 4 outlets manifold (Cross)IPSO301 Stake 180° Turbulent flowIPSO301Q Stake 90° Turbulent flowIPSO301BQ Stake 90° barbedIT-EHD503PEVA 3x5 mm microtube PEVA (reel)SFH0332-24 3x5 mm microtube PEVA 60 cm precutSFH0332-32 3x5 mm microtube PEVA 80 cm precutLa I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.23

E M I T T E R S / S P R Y A E R SCAPILLARY LINECENTURIONSprayerFeaturesFeaturesSTANDARD• Self-tapping stake• Ideal for watering pots, greenhouses or nurseries• The standard stake accepts a capillary tube with outsideØ 3,2 mm• Single moulding sprayer, for flower box or planter• Available in three different arc patterns:360°, 180° and 90°• Colour coded spray pattern• Well proportioned and uniform water distributionSpecifications• 4 mm threaded inlet• Working pressure from 0,5 to 1,5 bar.Codes1011307 ● Centurion 360°FeaturesCOLIBRÌ• Self-tapping stake• Capillary angle adjustment from 45° to 90°• Capillary tube with outside Ø 3,2 mm.1011306 Centurion 180°1011305 Centurion 90°1011137Stake for CenturionUse with IT-FBJXX riserbar 360° 180° 90°l/h r (m) l/h r (m) l/h r (m)0,5 60 1,00 43 1,0 34 1,01,0 86 1,25 62 1,25 49 1,251,5 106 1,50 77 1,50 60 1,50CodesIT-RCP90885-1Capillary 3,2 x 0,8 x 85 cmIT-RCP908100-1 Capillary 3,2 x 0,8 x 100 cmIT-IPS0305-A● Black stake for capillary tube Ø 3,2 mmIT-IPS0305-A1● Blue stake for capillary tube Ø 3,2 mmIT-IPS0305-A2IT-IPS0315IT-RCP90800-X● Red stake for capillary tube Ø 3,2 mmColibrì stake for capillary tube Ø 3,2 mmCapillary 3,2 x 0,8 mm reel of 500 m24La I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.

VIBRO MISTUpside-Down Vibrodynamic MisterApplications• Ideal for humidifying closed environments such as greenhouses and tunnels thanks to the reduced diameter andoutstanding uniformity of distribution• Particularly suitable for in green-house seed germinationand rooting• Suspended powder controlFeatures• Structure of the body that avoids dripping and shadedsections• Diameter of the drops atomised, approx. 50 micron at 3bar• Structure of the nozzle that prevents the accumulation ofparticles and deposits thanks to the vibrations of theNIDDLE• Installation with anti-drip option avoids the water from theatomisers from draining and permits them to start togetherat the beginning of each irrigation cycle• C.U. recommended 85%Specifications• Recommended operating pressure: 2 bar• Recommended filtration: 150 micron.Mod. 20 l/h @ barDistancebetween lines (m)1.00% CU1.25% CU1.50% CU1.75% CU2.00% CU2.25% CU2.50% CU1.00 84 89 88 86 81 711.25 89 95 95 92 85 76 661.50 88 95 95 92 85 76 661.75 86 92 92 91 85 762.00 81 85 85 85 83 752.25 71 76 76 76 752.50 66 662.753.00Codes:See page 30 ID 5Performance chartNozzleColour code1.00% CU1.25% CUPressure(bar)1.50% CU1.75% CUFlow rate(l/h)(m)* (m)**Purple 1,4 18 2.5 2.52,0 21 3.0 3.02,5 24 3.0 3.03,0 26 3.0 3.0Blue 1,4 35 3.5 3.52,0 42 4.0 4.02,5 47 4.0 4.03,0 51 4.0 4.0Mod. 40 l/h @ 2 barRECTANGULAR SPACING • Distribution uniformity (% CU) • Distance between atomisers (m) at 100 cm off the ground2.00% CU2.25% CU2.50% CU2.75% CU90 90 90 90 88 85 76 7190 97 98 98 95 89 80 7190 98 98 98 95 88 80 7190 98 98 97 94 89 80 7188 95 95 94 93 88 8085 89 88 89 88 86 7976 80 80 80 80 7971 81 71 71Vibro Mist*100 cm off the ground **150 cm off the groundØ3.00% CUI M P A C T S P R I N K L E R SSINGLE FILE • Distribution uniformity (% CU) • Distance between atomisers (m) at 100 cm off the groundDistancebetween lines (m)1.00% CU1.25% CU1.50% CU1.75% CU2.00% CU2.25% CU2.50% CU1.25 79 89 89 88 83 75 661.50 75 73 73 73 72 691.75 71 73 73 73 72 692.00 67 73 73 73 72 691.00% CU1.25% CU1.50% CU1.75% CU2.00% CU2.25% CU2.50% CU2.75% CU3.00% CU89 94 94 94 93 88 83 73 6586 79 79 80 79 78 75 6982 79 79 80 79 78 75 6977 79 79 80 79 78 75 69La I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.25

M I N I S P R I N K L E R SApplicationsVIBRO FLOVibrodynamic Mini Sprinkler• Open field orchard-type applications, under tree sprinklingfor trees such as olive, orange, lemon fruit trees in generalFeatures• It can work both in its standard position on a rod ordirectly on the pipe• Body structure with no support bridge that avoids dripping• Nozzle design that protects the mini-sprinkler from bothinsects and dust if used the right way up• The revolutionary “vibro” systems ensures:- Outstanding distribution uniformity, thereby diminishingthe need for overlapping to a minimum;- Higher resistance to clogging thanks to the constantremoval of the pariticles that have sedimented;- A very strong jet that avoids wetting the leavesVery important when spraying under tree with waste water• Colour code.Specifications• Recommended operating pressure: 2 bar.• Filtration: 150 micron.• Spacing recommended to have a CU(uniformity coefficient) of 92%: 2 x 2m for the 120 l/h model.Codes: See page 30 ID 4SE05400804IPS0408-1Cantal Adapter 8 mmStake for Cantal AdapterAdapter 8 mmVibro FloRECTANGULAR SPACING • Distribution uniformity (% CU) @ 2 barModel 2 X 2 2,5 X 2,5 3 X 3Mod. 105 l/h 89 88 87Mod. 120 l/h 92 91 85Mod. 160 l/h 89 87 87Performance chartNozzle2035506070105120160Pressure(bar)1231231231231231,5231,5231,523Flow rate(l/h)–2026–35433550614060744970867410512884120149112160194Ø(m)*1.82.83.13.54.04.55.05.5ELITEUpside-Down Vibrodynamic 75 l/hApplications• A new development to shoot up volumesof mini-drops, to land slowly and covercompletely any thing on their routeSpecifications• CU recommended 94%.Codes: See page 30 ID 6RECTANGULAR SPACING • Precipitation mm/hELITEModel 2 X 2 2,5 X 2,5 3 X 3 3,5 x 3,5Mod. 75 l/h 18 mm/h 12 mm/h 8,3 mm/h 6,1 mm/h*25 cm off the ground26La I.S.E. S.r.l.may change product specificationswithout prior notice and without liability.

M I N I S P R I N K L E R SROTA PIVOTUpside-Down Mini-Sprinklerswith Removable NozzleFlushingApplications• Ideal for under tree upside-down sprinkling for treecultivation, in closed environments such as green houseand tunnels• Suitable for cooling livestock and poultry breedingpremises.Features• Upside-down mini-sprinkler from 40 l/h to 240 l/h• Rapid cleaning of the sprinkler simply by turning thenozzle 180° for a few seconds without having todismantle anything• Flow rate and required radius easily adjustable changingnozzle• Colour coded nozzle• Installation with an anti-leakage function that prevents thewater from the mini-sprinklers from draining off at the endof the irrigation and enables simultaneous starting at thebeginning of each irrigation cycle.Specifications• Recommended operating pressure: 2 bar• Filtration: 150 micron• Recommended spacing to get a CU (Uniformity coefficient)of 94%: 4 x 4 m for the 70 l/h model• The precipitation uniformity charts based on spacing andchosen pressure are available for each nozzle on requestCodes: See page 29 ID 5; page 30 ID 10WaterflowWaterflowNozzleColour codeBlueGreenGrayBlackOrangeRedBrownYellowIrrigatingPerformance chartPressure(bar)1,42,02,53,01,42,02,53,01,42,02,53,01,42,02,53,01,42,02,53,01,42,02,53,01,42,02,53,01,42,02,53,0Flow rate(l/h)33404549394753584958657156677582748899108100119133146130155173190167200224245Rota PivotØ(m)*6,56,57,07,07,07,08,08,58,58,58,58,59,59,59,59,5*150 cm off the ground28I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

ASSEMBLY EXAMPLES AND CODESCodes1.a SE05101300 Male starter1.b SE0510100M Starter 5.5 mm1.c SE05200100M Male adaptor for tube 4x7 mm2 SE05200171F Tube PVC 4x7 mm 30 cm MxF2 SE05200160F Tube PVC 4x7 mm 60 cm MxF2 SE05200190F Tube PVC 4x7 mm 90 cm MxF3 SE05 Blue stabilyzer4 SE01731002 ● Blue - Rota-One 40 l/h (Mini-sprinkler upsite-down)4 SE01731302 ● Green - Rota-One 50 l/h (Mini-sprinkler upsite-down)4 SE01731502 ● Grey - Rota-One 60 l/h (Mini-sprinkler upsite-down)4 SE01731802 ● Black - Rota-One 70 l/h (Mini-sprinkler upsite-down)4 SE01732302 ● Orange - Rota-One 90 l/h (Mini-sprinkler upsite-down)4 SE01733202 ● Red - Rota-One 120 l/h (Mini-sprinkler upsite-down)4 SE017334002 ● Brown - Rota-One 160 l/h (Mini-sprinkler upsite-down)4 SE017335002 ● Yellow - Rota-One 200 l/h (Mini-sprinkler upsite-down)5 SE017440003 ● Light blue - Rota-Pivot 25 l/h (Mini-sprinkler upsite-down)5 SE01741003 ● Blue - Rota-Pivot 40 l/h (Mini-sprinkler upsite-down)5 SE01741303 ● Green - Rota-Pivot 50 l/h (Mini-sprinkler upsite-down)5 SE01741503 ● Grey - Rota-Pivot 60 l/h (Mini-sprinkler upsite-down)5 SE01741803 ● Black - Rota-Pivot 70 l/h (Mini-sprinkler upsite-down)5 SE01742303 ● Orange - Rota-Pivot 90 l/h (Mini-sprinkler upsite-down)5 SE01743203 ● Red - Rota-Pivot 120 l/h (Mini-sprinkler upsite-down)5 SE01744003 ● Brown - Rota-Pivot 160 l/h (Mini-sprinkler upsite-down)5 SE01745003 ● Yellow - Rota-Pivot 200 l/h (Mini-sprinkler upsite-down)5 SE01746003 ● Purple - Rota-Pivot 240 l/h (Mini-sprinkler upsite-down)6 SE031040 Pressure regulator, from 2.0 to 4.5 bar, flow rate from 60 a 160 l/h1.a 1.b 1.c Inlet F23 Outlet MM I N I S P R I N K L E R SOr 64545I.S.E. S.r.l.may change product specificationswithout prior notice and without liability29

M I N I S P R I N K L E R SASSEMBLY EXAMPLES AND CODESCodes1.a SE05100100 Starter 5.5 mm1.b SE05100101 Starter with rubber 5.5 mm1.c SE05101200 Male starter 1/4”1.d SE05101500 Male starter 1/8”1.e SE051001600 Male starter 5 mm2 SE05200171F Tube PVC 4x7 mm 30 cm MxF2 SE05200160F Tube PVC 4x7 mm 60 cm MxF2 SE05200190F Tube PVC 4x7 mm 90 cm MxF3 SE05 Blue Stabilyzer4 SE01700700 ●● Purple/Blu - Vibro Flo B.P. 20 l/h (Mini Sprinkler)4 SE01700900 ●● Light blue/Light blue - Vibro Flo B.P. 35 l/h (Mini Sprinkler)4 SE01711300 ●● Green/Black - Vibro Flo B.P. 50 l/h (Mini Sprinkler)4 SE01711500 ●● Grey/Black - Vibro Flo B.P. 60 l/h (Mini Sprinkler)4 SE01711800 ●● Black/Black - Vibro Flo B.P. 70 l/h (Mini Sprinkler)4 SE01712300 ●● Orange/Black - Vibro Flo B.P. 90 l/h (Mini Sprinkler)4 SE01702700 ●● Blue/Black - Vibro Flo ST. 105 l/h (Mini Sprinkler)4 SE01703200 ●● Red/Black - Vibro Flo ST. 120 l/h (Mini Sprinkler)4 SE01704000 ●● Brown/Black - Vibro Flo ST. 160 l/h (Mini Sprinkler)5 SE01730008 ● Purple - Vibro MIST ST. 20 l/h (mister)5 SE01730401 ● Blue - Vibro MIST ST. 40 l/h (mister)6 SE01711802 Elite 75 l/hAntileak valve MxF pressure from 2 to 4 bar7 SE031505Fflow rate until, 200 l/h8 SE05500200 Adaptor MxM9 SE01731002 ● Blue - Rota-One 40 l/h (Mini-sprinkler upsite-down)9 SE01731302 ● Green - Rota-One 50 l/h (Mini-sprinkler upsite-down)9 SE01731502 ● Grey - Rota-One 60 l/h (Mini-sprinkler upsite-down)9 SE01731802 ● Black - Rota-One 70 l/h (Mini-sprinkler upsite-down)9 SE01732302 ● Orange - Rota-One 90 l/h (Mini-sprinkler upsite-down)9 SE01733202 ● Red - Rota-One 120 l/h (Mini-sprinkler upsite-down)9 SE017334002 ● Brown - Rota-One 160 l/h (Mini-sprinkler upsite-down)9 SE017335002 ● Yellow - Rota-One 200 l/h (Mini-sprinkler upsite-down)10 SE01740003 ● Light blue - Rota-Pivot 25 l/h (Mini-sprinkler upsite-down)10 SE01741003 ● Blue - Rota-Pivot 40 l/h (Mini-sprinkler upsite-down)10 SE01741303 ● Green - Rota-Pivot 50 l/h (Mini-sprinkler upsite-down)10 SE01741503 ● Grey - Rota-Pivot 60 l/h (Mini-sprinkler upsite-down)10 SE01741803 ● Black - Rota-Pivot 70 l/h (Mini-sprinkler upsite-down)10 SE01742303 ● Orange - Rota-Pivot 90 l/h (Mini-sprinkler upsite-down)10 SE01743203 ● Red - Rota-Pivot 120 l/h (Mini-sprinkler upsite-down)10 SE01744003 ● Brown - Rota-Pivot 160 l/h (Mini-sprinkler upsite-down)10 SE01745003 ● Yellow - Rota-Pivot 200 l/h (Mini-sprinkler upsite-down)10 SE01746003 ● Purple - Rota-Pivot 240 l/h (Mini-sprinkler upsite-down)11 SE031040 Pressure regulator, from 2.0 to 4.5 bar flow rate from 60 a 160 l/h74 5 64 5 6301.a 1.b 1.c 1.d 1.e9118 Inlet M23 Outlet F10I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

ApplicationsWb VI CLASSIC• Applicable for full coverage irrigation on vegetable rowcrops or any archard watering where full undertreeirrigation is requiredFeatures• Robust and proven sturdy double framedsprinkler• Anti-insect/dust proof spinner covers jetwhen not in operation• Double bearing ensures spinner stability andlong life• Maximum start-up torque obtained fromdeflector plate to ensure reliability of start-upand operation in the most hostileenvironments• Uniform distribution characteristics and largedroplet size being less susceptible to windeffects• Color coded large range of nozzle to suitmany applications and for ease ofidentification• Lower angle of throw for maximizing underfoliage penetration• Balanced spin rate to minimize stakevibration.Performance chart WB VI ClassicSpecifications• Inlet: 10 mm (3/8”) BSP male thread• Material: Frame, Bearing and Nozzle - Acetal, Spinner -Nylon.• Diameter Range: 4,3 m to 11,2 m• Flow Range 44 l/h to 304 l/h• Operating Pressure Range: 1 to 2 bar.• Recommended Operating Pressure: 1,5 bar.(Maximum Distribution Efficiency).Codes10142XX*10143XX**IT-IPS0406-11014372IT-IPG10091IT-IPG10091-1WbWb VI ClassicWb VI Classic Shorter diameterStake 40 cm to be used with adapter IPG10091Stake 36 cm with barbed inlet + 60 cmmicrotube 5 mmAdapter for IPS0406-1,5 mm barbed inlet x3/8” Female for plastic stake Ø 5mmAdapter for metal rod Ø 6 mm - 5 mm barbedinlet 3/8” Female* XX: 72; 73; 74; 75; 76; 77; 49 ** XX: 51; 83; 84; 85M I N I S P R I N K L E R SColour CodeCode Ø ShortNozzle(mm)● 1014272 (1014351) 1,05● 1014273 (1014383) 1,25● 1014274 (1014384) 1,40● 1014275 (1014385) 1,65● 1014276 1,80● 1014277 2,00● 1014249 2,30Pressure(bar)1,01,52,01,01,52,01,01,52,01,01,52,01,01,52,01,01,52,01,01,52,0StandardØ (m)6,16,97,36,877,88,38,19,39,68,910,010,59,510,510,89,610,511,19,610,811,2ShortØ (m)(4,3)(4,8)(5,1)(4,8)(5,5)(5,8)(5,7)(6,5)(6,7)(6,2)(7,0)(7,6)---------Flow rate(l/h)4455646176898099115108134156125155179156192221214265304Max heightof trajectory (m)0,560,620,650,570,710,900,600,830,900,600,800,920,600,770,900,650,740,850,740,971,05I.S.E. S.r.l.may change product specificationswithout prior notice and without liability31

M I N I S P R I N K L E R SWb VI CLASSICSprinkler Spacing• Wb VI sprinklers are generally spaced in two ways:- Single sprinkler per tree or strip watering (for wateringindividual trees)- Full coverage (Where cover crops are grown thesprinkler are spaced between 4 m to 8 m) forherbaceous coltivations• When designing Full Coverage systems refer to the Tablebelow for distribution Uniformity requirements and desiredPrecipitation Rate.Sprinkler precipitation (mm/h)NozzleWhitePress(bar)1,001,502,00square spacing (m x m) triangular spacing (m x m)3 x 3 4 x 4 5 x 5 6 x 6 7 x 7 8 x 8 3 x 3 4 x 4 5 x 5 6 x 6 7 x 7 8 x 84,9 6,2 7,1 2,8 3,5 4,0 1,8 2,2 2,5 - - - - - - - - - 4,9 6,2 7,1 2,8 3,5 4,0 1,8 2,2 2,5 - - - - - - - - - Brown1,001,502,006,8 8,5 9,9 3,8 4,8 5,6 2,4 3,1 3,6 1,7 2,1 2,5 1,2 1,6 1,8 - - - 6,8 8,5 9,9 3,8 4,8 5,6 2,4 3,1 3,6 1,7 2,1 2,5 1,2 1,6 1,8 - - - Green1,001,502,008,9 11,0 12,8 5,0 6,2 7,2 3,2 4,0 4,6 2,2 2,7 3,2 1,6 2,0 2,3 - - - 8,9 11,0 12,8 5,0 6,2 7,2 3,2 4,0 4,6 2,2 2,7 3,2 1,6 2,0 2,3 - - - Blue1,001,502,0012,0 14,9 17,3 6,8 8,4 9,7 4,3 5,4 6,2 3,0 3,7 4,3 2,2 2,7 3,2 1,7 2,1 2,4 12,0 14,9 17,3 6,8 8,4 9,7 4,3 5,4 6,2 3,0 3,7 4,3 2,2 2,7 3,2 1,7 2,1 2,4 Grey1,001,502,0013,9 17,2 19,9 7,8 9,7 11,2 5,0 6,2 7,2 3,5 4,3 5,0 2,6 3,2 3,7 2,0 2,4 2,8 13,9 17,2 19,9 7,8 9,7 11,2 5,0 6,2 7,2 3,5 4,3 5,0 2,6 3,2 3,7 2,0 2,4 2,8 Yellow1,001,502,0017,4 21,4 24,5 9,8 12,0 13,8 6,3 7,7 8,8 4,3 5,3 6,1 3,2 3,9 4,5 2,4 3,0 3,5 17,4 21,4 24,5 9,8 12,0 13,8 6,3 7,7 8,8 4,3 5,3 6,1 3,2 3,9 4,5 2,4 3,0 3,5 Red1,001,502,0023,8 29,5 33,8 13,4 16,6 19,0 8,6 10,6 12,2 5,9 7,4 8,4 4,4 5,4 6,2 3,3 4,1 4,8 23,8 29,5 33,8 13,4 16,6 19,0 8,6 10,6 12,2 5,9 7,4 8,4 4,4 5,4 6,2 3,3 4,1 4,8 < 55 % 55 - 64 % 65 - 74 % 75 - 84 % 85 - 94 % > 95 %Distribution uniformity scale (%)• Distribution Uniformity compares the mean of the lowest25% of precipitation readings to the mean precipitationbetween a pattern of sprinklers. It is an indicator of theuniformity of water application and will highlight any “dryspots” that could occour, causing plant stress or salinitybuild up. An acceptable figure for distribution uniformity isequal to or above 75% with less than 65% being deemedunacceptable.• All tests have been carried out in still conditions (no wind)and to relevant ISO or equivalent Standards. Derationfactor should be used for windy conditions.• Triangular spacing are represented by Sprinkler x Row.RS32I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

ApplicationsWb VI PCPressure Compensating• Ideal to irrigate in difficult topographical condition, providefull coverage for vegetable row crops and undertreeirrigation for orchards.Features• Pressure Compensating• Available in two versions: standard diameter and shortdiameter. The short diameter is ideal for new planted tree• Wb VI PC short diameter can be changed to a standarddiameter by simply breaking off the end of the deflector.The rotor has been designed so that this operation can bedone by hand• Robust frame design for superior strength and long fieldlife• Excellent start-up reliability and low maintenance• Insect proof spinner design to protect the nozzle when notin use• Excellent uniformity of water distribution ensures a good,even root development• Self-cleaning, pressure compensating system that ensureshigh uniformity of water distribution• Hook on top for easy hanging• Color coded nozzles: brown (35 l/h), sky-blu (45 l/h),light green (57 l/h), grey (90 l/h)SpecificationsNew Wb 90 l/h• 10 mm (3/8”) BSP male thread• Working pressure from 1,5 to 4 bar• Optional threaded adapter (IPG10091).Codes10147XX*10147XX**IT-IPSO406-11014372IPG10091IT-IPG10091-1Wb VI PCWb VI PC Shorter diameterWb VI PCStake 40 cm to be used with adapter IT-IPG10091Stake 36 cm with adapter and barbed take offwith 60 cm tube (5 mm)Adapter for IPS0406-1 5 mm barbed inlet 3/8”Female for plastic stake Ø 5 mmAdapter for metal rod Ø 6 mm - 5 mm barbedinlet 3/8” FemaleM I N I S P R I N K L E R S* XX: 58; 59; 60; 62 (90 l/h) ** XX: 70; 71; 72; (90 l/h)Performance chart Wb VI PC (35, 45, 57, 90 l/h)Color codeCode Standard Shortbarshort Ø (m) (m) 1,0 1,4 1,7 2,0 2,4 2,8 3,5● 1014758 (1014770) 4,3 (1,4) 31,7 l/h 35,0 l/h 36,3 l/h 36,6 l/h 36,4 l/h 36,4 l/h 36,3 l/h● 1014759 (1014771) 4,7 (1,5) 42,3 l/h 46,6 l/h 47,7 l/h 47,3 l/h 47,1 l/h 47,4 l/h 46,9 l/h● 1014760 (1014772) 4,7 (1,5) 48,4 l/h 53,4 l/h 56,4 l/h 56,0 l/h 55,6 l/h 56,4 l/h 56,0 l/h● 1014762 / 8,6 / / 86,0 l/h 87,0 l/h 88,0 l/h 88,4 l/h 89,0 l/h 90,0 l/hI.S.E. S.r.l.may change product specificationswithout prior notice and without liability33

M I N I S P R I N K L E RBROWNING B500ROTOFRAMEApplications• Ideal under foliage and tunnel irrigation.Features• Low operating pressure• Recommended presuure 1,5 bar• Wide range of nozzlecombinations• Uniform distribution.Specifications• Engineered polypropylene and acetal construction• Order sprinkler and two nozzles or preassembled• Inlet 15 mm (1/2”) femaleCodes1014270 Only Browning sprinkler body1014261 Round with pin (03)1014262 Round with pin (05)1014264 Triangular (10)1014263 Round (11)1014266 Triangular (15)1014265 Round (16)Performance chart couple of nozzles1014270 xxyy* bar Ø (m) l/h1,07,812403101,59,01522,09,617505100315051511161516031105111616* xxyy: couple of nozzle1,01,52,01,01,52,01,01,52,01,01,52,01,01,52,01,01,52,01,01,52,01,01,52,07,89,09,69,210,611,19,210,611,110,211,411,98,610,010,710,812,012,410,812,012,48,610,010,7149181209166205237179221255214262304235289333124152175143175202247304351Applications• A unique lower pressure “butterfly” sprinkler with arotating spinner. Suitable for total coverage irrigation ofrow crops.Features• Rotating spinner and rotating frame which provides evenwater distribution at lower pressures• Materials: Metal and plastic constructionSpecifications• Inlet:- 15 mm (1/2”) BSP Female or- 20 mm (3/4”) BSP Female• Flow Range: 12 to 16 l/min• Diameter Range: 12 to 13 m.Codes1015190 Rotoframe 1/2”1015191 Rotoframe 3/4”Performance chartbar Ø (m) l/min1,0 12,2 11,81,5 13,4 13,22,0 13,1 14,72,5 12,0 15,234I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

ApplicationsF SERIESInox screen / Disc filtersF I LT E R S• Ideal for watering systems where the flow does not exceedthe flow rates given in the table.Features• Easy to dismount for easy cleaning• Available with disc cartridge or Inox screen cartridge• BSP male thread.Specifications• Maximum working pressure 10 bar• 1/2” male outlet (with optional cap) for quick flushing• Max flow rate indicated in the table refers to a max pressuredrop of 0,5 bar (clean water)• Filter in polypropylene• Stainless-Steel Screen or plastic discs• O-ring in Buna-N.F20 / F25 / F32 / F40Installing disc filters, the flow direction is opposite to thescreen filterFilter spare cartridgeScreen filterDisc filterIT-AMP0004-1SIT-AMP0004-2FIT-AMP0004-4FIT-ATP1115100 micron for 3/4” and 1”Inox screen filters “S” model100 micron for 1”, 1” 1/4 and 1” 1/2Inox screen filters100 micron for 1”, 1” 1/4 and 1” 1/2disc filtersCap 1/2” female (bag. of 10 unit)DimensioniModelA(mm)B(mm)Ø(mm)F20-S 144 140 78F25-S 144 147 78F25 220 186 109F32 220 190 109F40 220 193 109Performance chartModel Code screen filter Code disc filterInlet / OutletmaleMicronMeshMax flow(l/min)F20-S IT-ABF2015-2SW – 3/4" 100 ~ 150 80F25-S IT-ABF2515-2SW – 1" 100 ~ 150 80F25 IT-ABF2515-2FW IT-ABF2515-3FW 1" 100 ~ 150 200F32 IT-ABF3215-2FW IT-ABF3215-3FW 1" 1/4 100 ~ 150 250F40 IT-ABF4015-2FW IT-ABF4015-3FW 1" 1/2 100 ~ 150 300I.S.E. S.r.l.may change product specificationswithout prior notice and without liability37

F I LT E R SXD (EXTRA DISC)2” and 3” Plastic disc filtersXD 3” FilterSpecifications• Glass-fibre-reinforced Nylon body• Ring-nut closure for easy assembly/disassembly• 2 gauge mounting points 3/8” female (to measure thepressure and hence the level of filter cleaning)• 3 types of filtration: 120, 150 e 200 mesh• Maximum working pressure: 10 bars• Flow rates:- for the 2”: 15-35 m 3 /h- for the 3” 30-60 m 3 /h(both short andstandard body):Disc CharacteristicsDisc filtration flowCodesIT-ABF5012-3XIT-ABF5015-3XIT-ABF5020-3XIT-ABF7512-3X*XD 2” Filter1” maleair releaseconnections2" Plastic disc filter, 120 mesh (125 Micron)2" Plastic disc filter, 150 mesh (100 Micron)2" Plastic disc filter, 200 mesh (75 Micron)3" Plastic disc filter, 120 mesh (125 Micron)• The special disc design allows not performing filtration onthe outer surface of the cartridge, but rather to utilise theentire raised sinusoidal path on the disc (see figure above):filtration occurs between the discs.• This patented system allows reaching a filtering surfacearea absolutely unachievable (with the same dimensions)by any other “standard” disc filter:- for the XD 2” and XD 3” short body: 10.800 cm 2- for the XD 3”: 18.000 cm 2• The filter allows very long cleaning intervals.IT-ABF7515-3X* 3" Plastic disc filter, 150 mesh (100 Micron)IT-ABF7520-3X* 3" Plastic disc filter, 200 mesh (75 Micron)IT-AMPX0204-120 2”Disc cartridge 120 mesh (blue disc)IT-AMPX0204-150 2”Disc cartridge 150 mesh (red disc)IT-AMPX0204-200 2”Disc cartridge 200 mesh (brown disc)IT-AMPX0304-120 3”Disc cartridge 120 mesh (blue disc)IT-AMPX0304-150 3”Disc cartridge 150 mesh (red disc)IT-AMPX0304-200 3”Disc cartridge 200 mesh (brown disc))2” head loss table 3” head loss table6352,5Head Loss (m)432Head Loss (m)21,5110,500 5 10 15 20 25 30 35 40Flow rate (m 3 /h)00 10 20 30 40 50Flow rate (m 3 /h)* Available XD 3” with short body, change ending “x” to “s” for ordering38I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

SD (STANDARD DISC)2” and 3” manual disc filterSpecifications• Glass fibre reinforced nylon body• Ring nut closure for easy assembly/disassembly• 2 gauge mounting points 3/8” female (to measure thepressure and hence the level of filtering cleaning)• 3 types of filtration: 120, 150 and 200 mesh• Filtering surface:- 1.200 cm 2 for the 2” and 3” short body- 2.000 cm 2 for the 3”• Max working pressure: 10 bar• Nominal flow rates*:- for the 2”: 15-35 m 3 /h- for the 3”(both short and standard body): 30-60 m3/h• 1” female threaded coupling for breather pipes• Same dimension as XD filters:- XD 2” L-175mm; H-550 mm- XD 3” L-325mm; H-860 mmApplicationsASA 100Double Chamber(metal sand filter)• To filter the following water sources: canals, rivers, lakes,open cisterns, well with a heavy sludge load• For drip, Tape and other micro irrigation systems.F I LT E R SCodesIT-ABF5012-3S2” plastic disc filter, 120 mesh(125 Micron)IT-ABF5015-3S2” plastic disc filter, 150 mesh(100 Micron)CodesIT-ABF7512-3SSIT-ABF7515-3SS3“ plastic disc filter, short body,120 mesh (125 Micron)3“ plastic disc filter, short body,150 mesh (100 Micron)IT-ASA1150IT-ASA1150-6IT-ASA1180ASA 2” female double chamber ECSASA 2” female double chamber GALVASA 3” female double chamber ECSIT-ABF7512-3S3“ plastic disc filter, 120 mesh(125 Micron)IT-ASA1180-6IT-ASA0100-1ASA 3” female double chamber GALVASA 4” female double chamber ECSIT-ABF7515-3SIT-AMPS204-120IT-AMPS204-150IT-AMPS304-1203“ plastic disc filter, 150 mesh(100 Micron)2” e 3” Disc cartridge 120 mesh, short body(blue disc)2” e 3” Disc cartridge 150 mesh, short body(red disc)3” Disc cartridge 120 mesh, (blue disc)IT-ASA0100-6AFSFOMAC-2AFSFOMAC-3AFSFOMAC-4ASA 4” female double chamber GALVASA 2” female, galvanized body, AC power,Filcom controller includedASA 3” female, galvanized body, AC power,Filcom controller includedASA 4” female, galvanized body, AC power,Filcom controller includedIT-AMPS304-1503” Disc cartridge 150 mesh, (red disc)AFSFOMDC-2ASA 2” female, galvanized body, DC power,Filcom controller includedAFSFOMDC-3ASA 3” female, galvanized body, DC power,Filcom controller includedAFSFOMDC-4ASA 4” female, galvanized body, DC power,Filcom controller included* For pressure losses see table XD filters on page 38IT-AFPOO78Silica sand 0,7-1,2 mm (bag of 25Kg)I.S.E. S.r.l.may change product specificationswithout prior notice and without liability39

F I LT E R SØGuideline to sand filter sizingLevelofsludgeConcentrationDesignflow rate(m 3 /h/m 2 )N.B.: one part per million (ppm) corresponds to one milligram litre (mg/l)Designflow rate(l/min/m 2 )Light 0 - 10 ppm 60 - 70 1000 - 1170Medium 10 - 100 ppm 50 - 60 830 - 1000Elevated 100 - 400 ppm 40 - 50 660 - 830HASA 100Metal Sand FiltersiLØFeatures• The double chamber construction allows a backflush withclean water without interrupting normal operation of thefilter• Automatic or manual backflush• The inspection caps give access to individual chamber.Specifications• Siliceous sand from 0,3 to 1,2 mm (1 bag = 25 kg)• Maximum working pressure 10 bar (2” and 3” mod.) and8 bar (4” mod.)• BSP Female thread (2” and 3” mod.)• Flanged coupling (4” mod.)• Epoxy coated steel (ECS) or galvanized steel (GALV)coating.• Manual ASA: filter body, inlet manifold, 2 gate valves• Automatic ASA: filter body, inlet manifold, 3 way backflushvalves metal murphy PD manometer, Filcom controllerpreassembled control turbine and electric connectionSand filters - general dimensions and featuresCodeModelDimensions (cm)H Ø L iFlowrate 1(m 3 /h)H=Filter height, I=Distance between inlet and outlet hole, L=Filter lenght, Ø=diameter 1. Clear Flo and ASA sand filters are designed for flows of around 1200 litres/minuteper m 2 of sand filtering area. Flow rate and project sizing depends on the water source. 2. The filters weight is approximate.Flowarea(m 2 )Maxworkpress.(bar)flow(m 3 /h)Backflush timemin(min)max(min)Weight 2(kg)Sandcapacity(kg)IT-ASA1150-x ASA 100 2" 109 52 105 86 35 0,49 10 11 2 5 92 150IT-ASA1180-x ASA 100 3" 117 60 110 93 44 0,60 10 13 2 5 100 200IT-ASA0100-x ASA 100 4" 134 77 136 113 69 0,96 8 21 2 5 250 400Sand filter double chamber12341234Filter operation ABBackflush operation ABOperation Position 1 Position 2 Position 3 Position 4Filtering ● ● ● ●Backflush A ● ● ● ●Backflush B ● ● ● ●● Valve closed● Valve open40I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

ApplicationsOVAL VOval valve from 2” up to 6”V A LV E SOval-Vs are hydraulic valves designed to satisfy all therequirements in agricultural fields. The limited number ofcomponents (only 3: body, diaphragm and cover) and theunique design of its diaphragm (oval) make the Oval-V thesmallest and lightest valve in the market place. Thanks to theunique and patented design of the diaphragm, not only thereis no need of spring but also is there very low value of headloss. Oval-V becomes, then, a practical valve suitable for allagricultural systems also thanks to the complete range ofavailable diameter (from 2” to 6”) and to the accessories thatcan transform it into electro-hydraulic valve, pressure reducingvalve, quick relief valve...Oval VThreadedFlangedØ(inch)L(mm)H(mm)B(mm)Peso(kg)2” 145 93 144 2,83” 220 120 216 6,03”A 176 115 154 3,64” 256 150 270 9,0Ø(inch)L(mm)H(mm)B(mm)Peso(kg)3” 180 200 216 10,54” 190 220 270 12,76” 275 288 425 37,0Code tableIT-OV-2T Oval-V 2” (50 mm) Threaded FBSPIT-OV-3F Oval-V 3” (80 mm) FlangedIT-OV-3T Oval-V 3” (80 mm) Threaded FBSPIT-OV-3TA Oval-V 3x2x3 Threaded FBSPIT-OV-4F Oval-V 4” (100 mm) FlangedIT-OV-4T Oval-V 4” (100 mm) Threaded FBSPIT-OV-6F Oval-V 6” (150 mm) FlangedIT-OV-MKIT 3 way brass manual kitIT-OV-SKIT-NO 3 way NO solenoid 24 VACIT-OV-SKIT-L 3 way latching solenoid 9-12 VDCIT-OV-SKIT-NC Solenoid kit (NL) 24 VACIT-OV-PRKIT*3 Way plastic pressure reducing kit+manualkit (PN10)IT-OV-PSKITIT-OV-MSKIT3 Way plastic pressure sustaining kit+ manual kit (PN10)Kit to integrate manual and solenoid kitIT-OV-QRKIT Quick safety kitIT-OV-2-D Diaphragm valve 2”IT-OV-3-D Diaphragm valve 3”IT-OV-4-D Diaphragm valve 4”IT-OV-6-D Diaphragm valve 6”* there is the possibility to choose different sensitivity of the spring (colour coded)to adjust the pressure regulator to different needs.I.S.E. S.r.l.may change product specificationswithout prior notice and without liability41

V A LV E SOVAL VOval Valve from 2” up to 6”Pressureregulator kitQuicksafety kitFeatures• Unique and patented design of the diaphragm: ovalshaped.Thanksto this the valve can be lighter, smaller butwith very low value of head-loss• Body and cover in GG25 grey cast iron• Oval diaphragm: natural reinforced rubber; long lastingthanks to shape of the valve that supports the diaphragmmuch more than in standard valves• Bolts: AISI302 Galvanized Steel• Coating: RAL3000 Epoxy/Poliester (>150 microns)• No spring: Thanks to the particular shape of thediaphragm, there is no need of spring (the ovalshapeddiaphragm has a “permanent memory”)• PN 16* (Pressure regulator PN10)• Easy dismounting, few breakout parts• Cap completely covers diaphragm.Headloss Table(psi) (bar)1.0015.00Ø 2”Ø 3”AØ 3”Ø 4”Ø 6”10.00.88.000.60.56.005.004.000.40.33.002.001.000.800.600.500.400.300.200.20.100.080.060.050.040.030.020.01(M3 /h)2 3 4 5 6 8 1020 30 40 50 60 80 100200 300 500 700 1.000(L/s) 0.3 0.4 0.6 0.8 3 4 5 8 1.0 10.0*Standard diaphragm works pressure from 0,5 up to 10 bars; to have higher pressure, please ask marketing office.2 6 20 30 40 50 7020010042I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

AIR RELEASE VALVEKinetic, Automatic, Double effectApplicationsValve designed to extract air from pipes, large filters, tanks orany similar equipment which must work without thepresence of air.Kinetic Valve 1” & 2”• At start-up as water enters irrigation system the valveextracts air that is in the system. This stage ends as waterreaches the inside of the valve raising the float and closingthe main discharge outlet.• At system shutdown the valve prevents pipe collapse byallowing atmospheric air into the system to restore theinside of the system to zero pressure.Automatic Valve 2”• Same characteristic of the kinetic valve, with the differencethat during system operation the valve continues to extractair from the system, allowing the income only to the arrestof the system.Kinetic & Automatic Valve 2”• It extracts the air from pipes as they fill. This stage end aswater reaches the inside of the valve raising the float andclosing the main discharge outlet. It exerts continuousautomatic control, eliminating any residual pocket of airthatmight reach the valve, as when this happens, the floatdrops, partially or totally opening the discharge outlet. Itprevents pipe collapse, because pressure decreasing.CodesV A LV E SSpecificationsKineticvalve 1”Kineticvalve 2”AutomaticValveDoubleeffectCode ARV-1-K ARV-2-K ARV-1-A ARV-2-KAWorking pressure (bar) 15,51 15,51 11,7 15,51totally sealed from (bar) 0,2 0,2 0,2 0,2volume of air release in m3/hwithout valve closing and 501 1002 70 1002without the presence of waterRelease air volume @ 0,34 bar(m 3 /h)44 442 5 238ARV-1-KARV-1-AARV-2-KARV-2-KA1" BSP M threaded Kinetic Air / Vacum Release Valve2" BSP M threaded Aut. Air / Vacum Release Valve2" BSP M threaded Kinetic Air / Vacum Release Valve2" BSP M threaded Double effect Air Release ValveAir release valve 1”kinetic and automaticAir release valve 2”kinetic and double effectARV-1-K 1”(kinetic) ARV-1-A 1”(automatic)ARV-2-K 2” ARV-2-KA 2” (*) ARV-2-KA 2”I.S.E. S.r.l.may change product specificationswithout prior notice and without liability43

C O N T R O L L E R SIRRITROL DCBattery operated controllerMULTI-PROGRAMIndependent Station controllerFeatures• 4, 6, 8 stations• Battery operated• Two independent programs• Water budget 10-200%• Stacking program• Low battery indication• Watering time: 1 min. to 599 min. in 1 min. increments• Start time: 3 starts per program• Days schedule: 7 days “select a day” or skip days” intervalfrom 1-14 days• Master valve/Pump Start• Rain off function• Program erase-total eraseSpecifications• Use one 9 V Alkaline battery to operate the controller.• Output to solenoid is 12V. Operate 9 volt valves withlatching solenoid, 2 wires.Features• 4, 6, 8 stations• Individual station programming• Self diagnostic circuit breakeridentifies override and displayelectric multifuncion of a station• Water budget 10-200%• Manual operating per station orsemi-auto of all programmed stations• “Copy” feature allows quick copy of data from previousstation• Stacking program• Power failure indication• Watering time: 1 min. to 9 hrs and 59 min. in 1 min. increments.• Start time: 3 starts per day for each station• Days schedule: 7 days “select a day” or “skip days”interval from 1-30 days• Master valve/Pump Start• Rain off function• Program erase-total erase.Specifications• External transformer 19,2VA• 9V, Alkaline battery to run the controller program and keepreal time during power failure• Operate electric valve 24VAC• Maximum output per station:24VCA - 0,35 Amp• Max total controller output:24VAC - 0,5 AmpCodesCodesIT-DC4DC 4 stationsIT-MP4MP 4 stations, external transformerIT-DC6DC 6 stationsIT-MP6MP 6 stations, external transformerIT-DC8DC 8 stationsIT-MP8MP 8 stations, external transformerDCLLatching solenoid 2 waysIT-MP4-EXTMP 4 stations, built-in transformerIT-DC4-EXTDC 4 stations, outdoorIT-MP6-EXTMP 6 stations, built-in transformerIT-DC6-EXTDC 6 stations, outdoorIT-MP8-EXTMP 8 stations, built-in transformerIT-DC8-EXTDC 8 stations, outdoor44I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

FILCOMController for filter backflushApplicationsFilcom is a controller that has been developed precisely forfilter backflush.Features• 2, 4, 6 stations (on the 4 and 6 st. it is possible to controlalso the pressure sustaining valve)• Permanente memory• It may work with 24 VAC, 24 VDC, 12 VDC, latching(2 wire 9-12VDC) solenoids• Set interval between complete backflush cycles:- in minutes (from 10 to 90 minutes, 1 by 1 minutes) or inhours (from 2 to 24, 1 by 1 hours)- it is possible to choose to have this interval set by thedifferential pressure sensor• Set the backflush time per station:- from 0 to 90 seconds (5 by 5 seconds)- from 2 to 10 minutes (10 by 10 minutes)• Set the delay between stations: from 0 to 90 seconds (5 by5 seconds)• It is possible to set the duration of the impulse to thelatching solenoids from 10 to 99 ms• It may work with AC or DC power• 1 led (Alarm) signal if a short cut has happened or if thedifferential pressure sensor has been actived• It is possible to set the delay for the reaction of thedifferential pressure sensor (from 5 to 90 seconds)• Number of the cycles execute after last reset is showed ondisplay• Each one of 6 led (related to the 6 stations) flashes whenthe station is working• Two digit display• Output to the stations (working in latching): 32 VDC• Max total controller output (latching): 5A latching• Duration of the impulse to latching solenoids: 10-99 ms• Consumption working in DC: 85 uAh (Stand by andCycles)*• Consumption working in DC:

C O N T R O L L E RSATELLITECentralina modulare per agricolturaIntroductionIn recent years we have seen an ever growing process ofautomation of irrigation systems: The complexity of thesesystems, at first expertly handled by the farmers, oftengenerated problems difficult for conventional control units tosolve. The Toro AG Satellite control unit was designedspecifically to meet these requirements.Completeness, flexibility and easy programming underlinesthis project.• Completeness: 30 independent programs (including incyclic mode), 10 irrigation start times per program, timedand volumetric contral, filter backwashing contrai, sensorcontrai, possibility of programming and remote contral viamobile phone or PC ali this in one single contral unit!• Flexibility: farm and residential irrigation systems are noteasy to standardise and hence a flexible control instrumentable to adapt to the individual system requirements isneeded. Satellite is a modular control unit both in terms ofnumber of stations (from 16 to 96) and in terms ofperformance - the basic principle is similar to a fullydevelopedprogrammer to which you can add sensors andremote controls whenever you like.• Easy programming: despite all the functions and theexpansion possibilities, Satellite remains an easy-toprogramcontrol unit by means of a practical dial and only5 buttons.Features• 16 stations or 8+8 stations for backwashing, expandableto up to 96 stations (using a slave after 32 zones) withmodules of 8 stations each.• Permanent memory• 30 independent programs with the possibility of choosingfor each of them: - whether or not to activate the program- whether to program in minutes/seconds, hours/minutesor in volumetric mode- the delay between stations- the irrigation start times according to the calendar,on alternate days or in relation to the sensors- program repetition (Ioop)- whether to activate 1 master valve and 1 pump controland with what delay oradvance• whether to sto re thedata in electronic or electromechanicalmode- whether or not to activate the sensors.• 10 irrigation start times per program• 14-day calendar• It can operate with 24 VAC, 12 VDC, 9 VDC or latching sole-46I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

noids in groups of 8• Water budget from 5% to 250%• Manual start per program or per station . Rain off (up to 13days)• Possibility of having numerous input sensors (Iuxmeter, anemometer,rain sensor, humidity sensor, flow sensor, flow measuringsensor, temperature sensor) and setting the operatingdelay• AC and DC power supply• Filter backwashing control option• Large display that facilitates programming andcontinuously shows the irrigation status• Practical dial with icons to guide intuitive programming .IP65 cabinett• RS232/422 port for connection to PC or mode m . I E485port for connection to the slaveSpecifications• Supply voltage: 230 VAC, 50/60 Hz (network filter)• Power available: primary 230V - secondary 10/20/24V - 2A• Degree of protection: IP 65• Max. DC and latching solenoid valve output current: 2A• Max. number of AC solenoid valves activatablesimultaneously: 8 (maximum 4 per station)• 1 group of 8 stations: dedicated to backwashing,configurable in 24V AC/24VDC/12VDC, latching• 1 master valve: configurable in 24 VAC/24VDC/12VDC,latching• 8A relay output for pump control• 8A relay output for alarm signalling• on/off sensor input unit for rain sensor, flow meter,pressure switch• IE485 port for connection to the humidity, rain,temperature, light and wind sensors• RS232/422 port far PC and modemC O N T R O L L E REncondingIT-SATELLITEIT-SATSLAVEIT-SATEXP8IT-SAT-MODEMIT-SAT-MODEM-PCIT-SAT-MODEM-A16-station Satellite control unit or 8+8stations for backwashing for AC, DC orlatching solenoids, DC or AC power supply.Slave far Satellite (to be purchased if youwish to go over 32 zones) with 8 stations8-station expansion module for Satellite orits slaveGSM modem interface for SatelliteGSM modem for PCAnalog modem interface for SatelliteIT-SATDC-ADAPTOR Module for use of one battery for SatelliteYou can also have a pre-assembled version of the system consisting of Satellite +Icod Plus + Sat- Modem (for information please contact ISE Technical Service orMarketing)IT-SAT-GATEIT-SAT-TTEPIT-SAT-TRHIT-SAT-TWIT-SAT-THGIT-SAT-SWSensor interfaceAir temperature sensorAir relative humidity sensorWind speed sensorSoil moisture sensorSoftware to program the Satellite controlunit via PCI.S.E. S.r.l.may change product specificationswithout prior notice and without liability47

F E R T I G A T I O NMAZZEI ® INJECTORSPP (polypropylene) or PVDF (kynar) bodyHighly efficient in the injection of liquids and gas by pressuredifference.The Mazzei injectors offer a safe, precise and economicmethod to inject practically any kind of liquid or gas iuta apressurised current.Operation• When a fluid under pressure enters the injector it ischannelled towards the injection chamber, and sharplyincreases speed.This acceleration causes a drop in pressure that allowsanother liquid or gas to be sucked through a special orificeand be mixed with the drive flow.• When the drive flow advances towards the injector {)utlet, itsspeed reduces, creating an increase in pressure (al a lowerlevel than at the injector inlet).The Mazzei injectors require a negligible pressure differencebetween inlet and outlet to create a feed through thesuction orifice.AIV 287-PAIV 287 (Kynar)AIC484AIC 484-XAIC584AIC584-PPGAIC885XAIC885X-PPGAIC1078AIC1078-PPGAIC1583AIC1583-PPGBuilt in non-return valve.Body in polypropylene or Kynar.Connection: I/O 1/2 " M NPTSuction: 4.7 mm socketBuilt in non-return valve.Body in polypropylene or Kynar.Connection: I/O 3/4" M BSPSuction: 1/4" M NPT and 6.3 mm socketPre-assembled non-return valve ACP83.Body in polypropylene or Kynar.Connection: 1 1/2” M BSPSuction: 1/2" M NPT and 9.5 mm socketBuilt in non-return valve.Body In polypropylene or Kynar.Connection: I/O 1" 1/2 MSuction: 1/2" M NPT and 12 mm socket.Advantage• Low investment and installation cost• No extemal power source is required in most installations• Low maintenance costs• Suitable far continuous mixing, without requiringadditional equipment.Why Kynar T M• Because Kynar (PVDF) is more than twice as good asmost other plastic• Strength, pressure (15 bar), chemical & temperatureresistance range are greater• Extremely resistant to most AG chemicals:- Sulfuric acid 90%, good to 100° C(PP, PE., Acetal are not recommended)- Nitric Acid 65%, good to 60° c.(PP, PE. not recommended)(PP, PE. resistant up to 6% at 20° C to 40° C)- Chlorine (PP not resistent)- Xylene, good to 40° C (PP, PE, PVC. not resistant).AIC2081-XAIC2081-PPGAIC4090Pre-assembled non-return valve ACP86.Body in Kynar or polypropilene (Kynarmodel) and C75 (PP model).Connection: I/O 2" M BSPSuction: 1/2" M NPT and 12 mm socketBuilt in non-return valve.Body in Kynar.Connection: I/O 4" M BSPSuction (two): 2" M BSPCodes ending “-p” or “-ppg” are made of polypropylene48I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

Data required for selectinginjectorsTo select the most suitable injector model the followingdata is required:1.Total water flow rate of the system ............ (l/min)2.Desired fertiliser/chemical productinjection flow rate............ (l/min)3.Pressure differential "d" available inthe system, calculated as follows:a. maximum working pressure ofsystem, at injector inlet............ barb. minimum working pressure ofsystem, at injector outlet............ barc. difference between pressures"a" and "b"............ barPercentage pressure differential"d" = (c/a) x 100 ............ %If "d" is equal or more than 20%, theBy Pass installation method can be used (seediagram l+2)If "d" is less than 20% then the injectorshave to be installed in series with anauxiliary pump (see diagrams)Selecting the right modeIFollowing the example given above, proceed as follows:• Find the pressure column with "a" = 5.5 bar.• Move to the right until "b" = 4 bar• Move to the right along the line to the suction capacitycolumn, continue right until the nearest value to thedesired suction capacity is found (using the example,341/h). We will select 30 "!/h. the top of this columnshows the code of the model to use, in this case AIC584.Model AIC584 will be capable of sucking 30 I/h only if the bypassis guaranteed a flow rate of 28 Vmin as indicated in the"Injector flow rate".If, in practise, the injector does not really bave this flow rate,the suction capacity will not meet the data given.Assembly diagram1 Microtube2 Metering valve (optional)3 StrainerF E R T I G A T I O NExample: 1=250 l/min; 2=341 l/h; a= 5.5 bar; b= 4 bar;c= 1.5 bar. Therefore "d" = 27%. This means that we canuse a By Pass installation, there is no need for a boosterpump.12Suction KitAAK184 • For Mazzei 1/2” and 3/4”AAK183 • For Mazzei 1” and 1/2”1 Suction KitInstallation diagrams3Diagram 1 Diagram 2 Diagram 3GaugePressure reducing valveGaugeBall valveMain flowInjectorbypass flowInjectorGaugeInjectorMeteringvalveMain flowMeteringvalveOptionalflow meterMain flowCentrifugalpumpMeteringvalveOptionalflow meterOptionalflow meterStrainerI.S.E. S.r.l.may change product specificationswithout prior notice and without liability49

F E R T I G A T I O NMAZZEI ® INJECTORPerformance chartaInletbarPressurebOutletbarAIC287 1/2”InjectorFlow ratel/minSuctionFlow ratel/minAIC484-X 3/4”InjectorFlow ratel/minSuctionFlow ratel/minAIC484 3/4”InjectorFlow ratel/minSuctionFlow ratel/minAIC584 3/4”InjectorFlow ratel/minSuctionFlow ratel/minAIC1078 1”InjectorFlow ratel/minSuctionFlow ratel/minAIC1583 1 1/2”InjectorFlow ratel/minSuctionFlow ratel/minAIC2081 2”InjectorFlow ratel/minSuctionFlow ratel/min0 0,33 1,48 0,92 1,84 6,40 8,57 39,700,07 0,16 1,05 0,66 1,82 2,93 5,33 39,700,35 0,14 1,10 0,11 4,50 0,75 4,50 0,42 7,91 1,80 20,74 1,40 40,60 3,36 122,60 39,700,21 0,08 0,46 0,06 1,60 0,17 - 13,500,28 - - - 0,63 - - 8,600 0,39 1,88 1,18 1,78 6,67 13,87 39,700,14 0,30 1,46 0,88 1,78 4,78 9,07 39,700,70 0,35 1,21 0,12 6,40 0,75 6,40 0,38 11,20 1,73 29,30 2,64 57,40 4,97 173,40 29,500,49 0,05 0,24 0,18 0,84 1,21 2,65 9,400,56 - - - 0,69 0,28 - 1,900 0,43 2,44 1,18 1,78 6,39 14,21 39,800,35 0,26 1,32 0,72 1,76 5,04 10,33 39,301,05 0,49 1,59 0,18 7,83 0,99 7,83 0,52 13,70 1,77 35,88 4,08 70,30 7,85 212,30 36,400,70 0,08 - 0,06 0,88 2,16 5,46 13,400,84 - - - 0,70 1,07 0,92 4,800 0,44 2,49 1,14 1,57 6,20 14,39 39,800,35 0,38 1,74 0,99 1,57 6,02 12,96 39,801,41 0,70 1,93 0,21 9,01 0,84 9,01 0,60 15,82 1,50 41,45 4,42 81,20 9,06 245,30 29,500,84 0,12 0,53 0,49 1,21 3,25 8,31 18,801,05 0,03 - 0,06 0,92 1,91 4,18 9,600 0,49 2,50 1,13 1,59 6,05 14,31 39,800,35 0,44 2,03 1,09 1,59 6,10 14,28 39,801,76 0,70 2,20 0,28 10,11 1,39 10,11 0,87 17,68 1,59 46,33 5,64 90,80 12,23 274,40 39,501,05 0,15 0,63 0,47 1,31 4,30 9,34 25,501,41 - - 0,06 0,77 2,01 3,09 8,500 0,50 2,51 1,09 1,60 5,95 14,29 39,800,35 0,50 2,41 1,08 1,60 5,96 14,28 39,802,11 0,70 2,46 0,35 11,05 1,82 11,05 1,05 19,38 1,57 50,76 5,96 99,50 13,35 300,50 39,801,05 0,23 1,07 0,71 1,59 5,18 10,55 32,301,41 0,11 - 0,45 1,15 3,50 7,92 21,501,76 - - - 0,73 1,13 1,15 3,900 0,51 2,54 1,09 1,61 5,93 14,30 39,800,35 0,50 2,48 1,10 1,61 5,93 14,29 39,802,46 0,70 2,65 0,43 11,96 2,14 11,96 1,10 20,93 1,60 54,84 5,96 107,40 14,14 324,40 39,801,05 0,32 1,53 1,10 1,59 5,80 12,98 39,501,41 0,19 0,93 0,70 1,38 4,68 10,40 29,001,76 0,07 - 0,25 1,04 2,98 5,62 16,100 0,51 2,57 1,08 1,62 5,88 14,34 39,800,35 0,51 2,44 1,12 1,61 5,88 14,43 39,800,70 0,47 2,43 1,12 1,62 5,88 14,33 39,802,81 1,05 2,84 0,40 12,76 1,89 12,76 1,12 22,37 1,61 58,63 5,88 114,80 13,91 347,10 39,801,41 0,27 1,31 0,96 1,59 5,79 12,17 33,001,76 0,17 0,41 0,72 1,35 4,56 9,68 24,902,11 0,02 - 0,25 0,95 2,69 5,14 10,700 0,51 2,61 1,09 1,63 5,86 14,38 39,800,35 0,51 2,46 1,09 1,64 5,86 14,40 39,800,70 0,51 2,39 1,10 1,64 5,86 14,38 39,803,16 1,05 3,07 0,44 13,55 2,21 13,55 1,10 23,73 1,63 62,19 5,86 121,80 14,10 367,90 39,801,41 0,35 1,70 1,05 1,62 5,92 13,40 38,301,76 0,25 1,15 0,87 1,49 5,48 11,03 32,002,11 0,15 - 0,65 1,22 4,18 7,13 21,502,46 - - 0,23 0,85 2,32 2,97 9,400 0,52 2,63 1,10 1,61 5,83 14,35 39,800,35 0,52 2,55 1,10 1,61 5,83 14,35 39,800,70 0,52 2,47 1,12 1,61 5,83 14,28 39,801,05 0,50 2,36 1,12 1,61 5,83 14,23 39,803,52 1,41 3,22 0,37 14,27 1,86 14,27 1,12 25,02 1,60 65,56 5,83 128,40 14,16 388,00 39,801,76 0,28 1,28 1,04 1,54 5,83 12,85 37,102,11 0,19 0,52 0,80 1,36 5,45 10,88 28,602,46 0,08 - 0,49 0,99 4,06 7,61 18,902,81 - - - 0,18 2,21 2,55 7,3050I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

Performance chartaInletbarPressureMAZZEI ® INJECTORbOutletbarAIC287 1/2”InjectorFlow ratel/minSuctionFlow ratel/minAIC484-X 3/4”InjectorFlow ratel/minSuctionFlow ratel/minAIC484 3/4”InjectorFlow ratel/minSuctionFlow ratel/minAIC584 3/4”InjectorFlow ratel/minSuctionFlow ratel/minAIC1078 1”InjectorFlow ratel/minSuctionFlow ratel/minAIC1583 1 1/2”InjectorFlow ratel/minSuctionFlow ratel/minAIC2081 2”InjectorFlow ratel/minSuctionFlow ratel/min0 0,52 2,68 1,12 1,67 5,85 14,49 39,800,35 0,52 2,67 1,12 1,67 5,85 14,44 39,800,70 0,49 2,42 1,12 1,67 5,85 14,45 39,801,05 0,49 2,40 1,12 1,67 5,85 14,32 39,804,22 1,41 3,48 0,49 15,63 2,37 15,63 1,12 27,40 1,65 71,80 5,85 140,70 14,37 425,10 39,802,11 0,36 1,46 1,09 1,60 5,87 13,03 37,902,46 0,26 0,71 0,96 1,50 5,79 11,50 32,102,81 0,17 - 0,76 1,27 4,87 9,33 24,003,16 0,04 - 0,25 0,91 2,80 5,18 13,700 0,52 2,67 1,14 1,63 5,89 14,43 39,800,39 0,52 2,68 1,14 1,63 5,89 14,43 39,800,70 0,52 2,49 1,08 1,64 5,89 14,43 39,801,05 0,52 2,35 1,08 1,64 5,89 14,43 39,804,92 1,41 3,75 0,52 16,88 2,25 16,88 1,08 29,60 1,63 77,55 5,89 151,90 14,43 459,10 39,802,11 0,47 1,98 1,08 1,62 5,90 14,24 39,802,81 0,30 1,03 1,03 1,62 5,83 12,53 33,403,16 0,22 0,57 0,85 1,47 5,16 10,07 27,803,52 0,11 - 0,72 1,06 3,44 7,85 20,603,87 - - 0,09 0,57 1,82 2,73 9,000 0,52 2,67 1,07 1,65 5,92 14,61 39,800,35 0,52 2,65 1,07 1,60 5,92 14,61 39,800,70 0,52 2,64 1,07 1,65 5,92 14,61 39,801,05 0,52 2,57 1,07 1,65 5,92 14,61 39,805,62 1,41 4,01 0,52 18,05 2,57 18,05 1,02 31,64 1,66 82,89 5,92 162,40 14,61 490,50 39,802,11 0,51 2,51 1,03 1,66 5,92 14,61 39,802,81 0,40 1,70 1,00 1,66 5,98 13,91 38,103,52 0,26 0,43 0,94 1,58 5,77 11,19 31,904,22 0,06 - 0,39 1,08 3,34 5,88 17,004,57 - - - 0,50 2,08 0,76 3,800 0,52 2,67 0,86 1,71 5,96 14,47 39,800,35 0,52 2,65 0,86 1,71 5,96 14,47 39,800,70 0,52 2,57 0,86 1,71 5,96 14,47 39,801,41 0,52 2,57 0,86 1,73 5,96 14,47 39,806,33 2,11 4,28 0,52 19,15 2,49 19,15 0,86 33,57 1,72 87,93 5,96 172,30 14,47 520,40 39,802,81 0,50 2,11 0,86 1,72 6,03 14,45 39,803,52 0,36 1,66 0,86 1,72 5,95 13,74 38,004,22 0,22 - 0,84 1,54 5,34 11,22 28,904,92 0,01 - 0,27 0,84 2,50 3,10 11,305,27 - - - 0,33 1,30 - -0 0,49 2,68 0,84 1,81 5,94 14,64 39,800,35 0,49 2,65 0,84 1,81 5,94 14,64 39,800,70 0,49 2,57 0,84 1,81 5,94 14,64 39,801,41 0,49 2,50 0,84 1,84 5,94 14,64 39,807,03 2,11 4,50 0,49 20,17 2,57 20,17 0,84 35,39 1,83 92,69 5,94 181,60 14,64 548,40 39,802,81 0,47 2,21 0,84 1,82 5,94 14,64 39,803,52 0,45 1,71 0,83 1,82 5,93 14,41 39,204,22 0,33 0,96 0,84 1,79 5,99 13,01 37,504,92 0,19 - 0,81 1,47 5,13 9,25 26,005,62 - - 0,06 1,06 1,93 1,62 7,600 0,40 2,89 0,78 2,03 5,96 - 39,800,35 0,40 2,77 0,78 2,03 5,96 - 39,800,70 0,40 2,73 0,78 2,03 5,96 - 39,801,41 0,40 2,65 0,78 2,03 5,96 - 39,802,11 0,40 2,54 0,78 2,03 5,96 - 39,808,44 2,81 5,00 0,40 22,10 2,32 22,10 0,77 38,76 2,01 101,60 5,96 - 598,00 39,803,52 0,38 2,02 0,77 2,01 5,96 - 39,804,22 0,37 1,57 0,77 2,00 6,01 - 38,604,92 0,30 1,29 0,77 2,00 5,96 - 37,505,62 0,23 - 0,77 1,80 5,73 - 33,006,33 0,09 - 0,74 1,08 3,86 - 19,507,03 - - - 0,69 1,41 - -F E R T I G A T I O NI.S.E. S.r.l.may change product specificationswithout prior notice and without liability51

F E R T I G A T I O NMAZZEI ® AIRJECTION ®Mazzei AirJection IrrigationA Proven Method of Increasing Crop Production inSubsurface Drip Applications• AvaiIable in seven models 1/2", two models 3/4" (serieRainbow), one 2" and one 3"• 10% + increase in yieIds as compared to conventionaldrip*• 50% increase in root mass - healthy and more vitai plant• Less stress on plant as the plant is able to absorb water,air and soil nutrients simuItaneously during the irrigationcycle• May hasten maturity in the plant allowing harvest to comeearlier• Ease of operation• Added benefits far organic growers* lncrease in yields based on results obtained from commercial farmingand study performed by ClT at CSU FresnoWhy AirJectionAside from soil, two basic ingredients necessary to rootsystems in farming are air and water.Mazzei AirJection Irrigation improves aerobic activity in thesoil and increases root respiration. Inadequate soil aerationreduces the rate of water and mineral absorption by theroots. Saturated soils will trap metabolites, ethylene andcarbon dioxide in the root zone, concentrations of which canseriously affect the rate of growth and size of the plant.Oxygen is also necessary for the survival of beneficial soilmicro-organisms that aid in improving soil physicalproperties and processes such as nitrification andammonification. Clay soils by nature are depleted of oxygenmore rapidly than soils high in sand content. MazzeiAirJection Irrigation provides needed oxygen directly to theroot zone during irrigation. The Mazzei AirJection Irrigationunit is calibrated to deliver the proper air to water ratio.Mazzei AirJection Irrigation is designed to work in subsurfacedrip irrigation (SSDI) applications. To ensure uniformdistribution of the air, the unit is typically installed at the driptape or dripper line sub main and will function as a pressurereducer.Selection & calibration guidelinesfor 2” and 3” modelsMazzei Airjection2” Model MAI-2081 3” Model MAI-3090(337 to 697 lpm) (795 to 1416 lpm)Inlet Bypass Water Orifice Inlet Bypass Water Orificepressure valve Flow Plate # pressure valve Flow Plate #Kg/cm 2 position (lpm) Kg/cm 2 position (lpm)(Turns open)(Turns open)2,11 0 337 107 2,11 0 795 1512 401 125 2 886 1514 439 125 4 958 1726 466 125 6 1033 1828 1056 1822,81 0 386 107 2,81 0 931 1512 469 107 2 1015 1514 530 125 4 1147 1726 568 125 6 1189 1828 1196 1823,52 0 432 107 3,52 0 996 1512 511 107 2 1094 1724 598 125 4 1230 1826 647 125 6 1314 1828 1321 1824,22 0 458 107 4,22 0 1086 1512 575 107 2 1181 1724 670 125 4 1340 1826 697 125 6 1412 1828 1416 182Bypass Valve at 0 turns is completely CLOSEDBypass Valve at 6 or 8 turns is completely OPENEDThe Orifice Plate should be installed with the numbers facing up.The smooth side should be down on the gasket.Care should be taken to ensure the Orifice Plate is centered on the gasket.Airjection Rainbow installation (1/2” and 3/4”)52I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

Advantages• 10-39% increasesin production as indicated by the testsdalle with belI peppers at a conunercial farming operation.• 50% larger root Inass, and a healthier root zone due to anincrease in soli microbial activity• Improve plant canopy size and reduce damage by the sun.• Tests performed with an infrared thermometer indicatelower levels of stress on ai1jected plants as compared toplants irrigated with conventional drip.Results show less yield loss due to stress.• Beneficial to clay soils where oxygen is easily depleted.• Added'benefits far growers of organic produce. Reducesthe need far additional soli amendrnentsand organicfenilizers.• Plant stress is minimized; Plants may produce earlier.• Reduce effects of soli crusting. Reduce tilling due to theinunediate injection of air under the surface of the beffi.• Micro-bubbles produced by the Mazzei Airjection Irrigationunit have a cleaning effect on the inner walls of the driptape and tubing keeping particulates in suspension andreducing the chance of plugging.• Injector constructed of rugged PVDF thermo-plastic carries5 year warranty• Single valve operation makes it easy to operate. . Injectoracts as a pressure regulating valve.• Substantial returns with minimal capital and operatingcosts.• 1£ss stress on plant as the plant is able to absorb water,air and soli nutrients• simultaneously during the irrigation cycle.• Any crop utilizing SSDI should benefit £rom the MazzeiAirjection Irrigation system.MAZZEI ® AIRJECTION ®Rainbow Series performance tableFlow rate inside injectorRainbow SeriesbarWater flow (l/min)● MAI-A3 ● MAI-A5 ● MAI-A71,38 3,41 5,55 7,071,72 3,79 6,31 8,202,07 4,16 6,81 8,962,41 4,54 7,44 9,592,75 4,92 7,95 10,353,10 5,30 8,58 10,983,45 5,55 8,96 11,614,13 6,06 9,71 12,494,82 6,43 10,47 13,755,51 6,94 11,23 14,64Flow rate inside injectorbarWater flow (l/min)● MAI-A10 ● MAI-A12 ● MAI-A141,38 9,97 11,36 13,881,72 11,10 12,49 15,272,07 12,11 13,50 16,912,41 13,25 14,89 18,172,75 14,13 15,90 19,053,10 15,14 16,91 20,693,45 15,64 17,92 21,834,13 17,28 19,56 24,224,82 18,55 20,94 25,865,51 19,56 22,33 27,63Flow rate inside injectorF E R T I G A T I O NCodesAMAI2081AAMAI3090Model 2081 2” M BSP in Kynar for air injectionModel 3090 3” M BSP in Kynar for air injectionbarWater flow (l/min)● MAI-A10 ● MAI-A12 ● MAI-A141,38 16,40 21,32 27,631,72 18,29 23,85 29,652,07 19,81 26,00 31,922,41 21,45 27,76 35,072,75 23,09 29,52 37,093,10 24,35 31,16 40,003,45 25,36 33,43 41,384,13 27,88 36,08 45,424,82 29,78 39,24 48,835,51 32,17 41,76 52,11Whith the above inlet flow rates and pressure we obtain an outletpressure of 0,7 barThe models A-3 to A-16 have 1/2” NPT threaded connectionsThe models A-20 to A-24 have 3/4” NPT threaded connectionsI.S.E. S.r.l.may change product specificationswithout prior notice and without liability53

A C C E S S O R I E SMICROTUBE FITTINGSMICROTUBEFCC0400FCC0500Union 4 mmUnion 5 mmIT-EHD503-1IT-EHD504-1IT-EHD504IT-EHD6083 x 5 mm semi-rigid PVC4 x 6 mm semi-rigid PVC4 x 6 mm PE5 x 8 mm soft PVCFEE0400FTT0400Elbow 4 mmTee 4 mmIT-IPS0304-1Microtube stakesfor: 3,2 x 5 mm - 4 x 6 mm4 x 7 mmFPG01Plug 4 mmIT-DNK00EuroPlus, Turbo Plus, EuroKey spannerIT-FBG05Cross 4 mmIT-FVT13Mini valve, 13 mm Barbed1011137Suitable for Centurio andMicroject Use with FBJOXrigid riser or with PolyetilenemicrotubeIT-IPSO406-1Accepts IPG10091adapter for Waterbird VIClassic and VI PV.Height: 39 cmPUNCHERIT-FMP044 mm PuncherIT-FMC13Hook for Drip-in 16 mm54I.S.E. S.r.l.may change product specificationswithout prior notice and without liability

PROMOTIONAL ITEMSIT-QMIAMA1IT-QMIAMA2IT-QMIAMA3IT-QMIAMA4IT-QMUAMA1IT-QMIABU1IT-QMIABU3IT-QMIABU2IT-QMUACA2IT-QMUACA1IT-QMUACA3IT-QMIAPEIT-QMIGRA1IT-QMKTP34IT-QMKRIGIT-QMIGTA2IT-QMIAMMIT-QMUAST1IT-QMUAST2IT-QMUAST3IT-QMKTP23-EIT-QMKTP24IT-QMKTP43IT-QMKTP43-PIT-QAGJACKIT-QMKMPIT-QAGPOSTIT-QAGPOST-1Promotional itemsAqua-Traxx T-ShirtToro Ag T-ShirtDrip IN T-ShirtToro Ag Polo T-ShirtAqua-Traxx Polo T-ShirtAqua-Traxx Shopping Bag (plastic)Irritrol/Toro Ag Shopping Bag (plastic)Drip In Shopping Bag (plastic)Toro Ag CapAqua-Traxx CapDrip In CapToro Ag PenIrritrol/Toro Ag FolderFolder Toro Agplastific ruler Toro AgToro Ag DoormatToro Ag Measuring tapeToro Ag flexible PVC BannerAqua.Traxx flexible PVC BannerDrip IN flexible PVC BannerAquatraXX Poster, EnglishToro Ag PosterDrip In Poster 50x70Drip In Poster 35x50Toro AG JacketMouse padToro AG Poster 100x70Toro AG Small Poster 70x50P R O M O T I O N A L I T E M SIT-QMIATPI/08IT-QMKTP32/0301IT-QMATP10E/R0204IT-QMKTP3-EIT-QMKTP31-EIT-QMKTP40-EIT-QMKTP42-EIT-QMKTP46-EIT-QMKTP52-EIT-QSD-EIT-QOV-EToro Ag LiteratureToro Ag Catalogue 2008, EnglishLAMA 2001 CatalogueLeaflet Aqua-Traxx, EnglishSell Sheet F Filter, EnglishLeaflet Drip In, EnglishLeaflet Mazzei Injectors, EnglishSell Sheet Water Bird PC & Classic, EnglishLeaflet Mazzei Airjection, EnglishLeaflet XD Filter, EnglishLeaflet SD AG EnglishLeaflet Oval-V EnglishI.S.E. S.r.l.may change product specificationswithout prior notice and without liability 55

N O T E................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................56I.S.E. S.r.l.may change product specificationswithout prior notice and without liability