Protege DIN Rail 8 PGM Output Expander

PRT-PX8-DINProtege DIN Rail 8 PGM Output ExpanderInstallation Manual

The specifications and descriptions of products and services contained in this manual were correct at the time ofprinting. Integrated Control Technology Limited reserves the right to change specifications or withdraw productswithout notice. No part of this document may be reproduced, photocopied, or transmitted in any form or by anymeans (electronic or mechanical), for any purpose, without the express written permission of Integrated ControlTechnology Limited. Designed and manufactured by Integrated Control Technology Limited. Protege® and theProtege® Logo are registered trademarks of Integrated Control Technology Limited. All other brand or productnames are trademarks or registered trademarks of their respective holders.Copyright © Integrated Control Technology Limited 2003-2011. All rights reserved.Publication Date: September 20112 PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011

Contents1 Welcome _________________________________________________________________ 41.1 Document Conventions ................................................................................................. 42 Mounting _________________________________________________________________ 52.1 Enclosure Removal ........................................................................................................ 53 DC Power and Encrypted Module Network ___________________________________ 64 Programmable Outputs ____________________________________________________ 74.1 PGM Outputs 1 to 8 ...................................................................................................... 75 Address Configuration _____________________________________________________ 86 LED Indicators ____________________________________________________________ 96.1 Status Indicator ............................................................................................................. 96.2 Fault Indicator ................................................................................................................ 96.3 Power Indicator ............................................................................................................. 97 Error Code Indication _____________________________________________________ 107.1 Error Code Display ...................................................................................................... 108 Mechanical Diagram ______________________________________________________ 119 Mechanical Layout _______________________________________________________ 1210 Technical Specifications ___________________________________________________ 1311 Ordering Information ______________________________________________________ 1412 Warranty ________________________________________________________________ 1513 Contact _________________________________________________________________ 16PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011 3

1 WelcomeThank you for purchasing the Protege® DIN Rail 8 PGM Output Expander by Integrated Control Technology. TheProtege System is an advanced technology security system specifically designed to enhance the functionality ofcondominium and apartment security with flexible local monitoring and offsite communication.The Output Expander extends the number of PGM outputs on the system by 8, featuring high current FORM Crelays for controlled automation of building systems including lighting and HVAC.Flexible module network architecture allows large numbers of modules to be connected to the RS-485 ModuleNetwork. Up to 250 modules can be connected to the Protege System in any combination to the network, over adistance of up to 900M (3000ft). Further span can be achieved with the use of a Network Repeater Module.Locking a network prevents the removal, substitution or addition of modules to the module network effectivelypreventing any tampering with the system.The current features of the Output Expander include:• Secure Encrypted RS-485 Module Communications• 8x PGM Outputs• Industry Standard DIN Rail Mounting• Online and Remote Upgradable FirmwareWhen receiving the Output Expander you should find the kit contains the items listed below. The kit type is clearlylabelled on the packaging and will tell you what your kit contains. Please note that if you do not have the correctcontents contact your distributor immediately.• Protege DIN Rail 8 PGM Output Expander• Protege DIN Rail 8 PGM Output Expander Installation Manual• DIN Rail Mounting Strip• 1x 330 Ohm EOL Termination ResistorFor more information on the Protege DIN Rail 8 PGM Output Expander and other Integrated Control Technologyproducts please login to www.incontrol.co.nz.1.1 Document ConventionsiIndicates a warning or cautionary messageIndicates an important note or advisory informationIndicates a hint or suggestion[TEXT]Bold text enclosed in brackets is used to show a section number or address of a programmableoption or information on programming shortcut sequences4 PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011

2 MountingThe Output Expander is designed to mount on standard DIN Rail either in dedicated DIN cabinets, ProtegeJumbo Cabinet Enclosure DIN Rail Gear Plates or generic DIN Rail mounting strip. A section of this DIN Rail stripbas been provided as a mounting option.When installing the Output Expander ensure that there is adequate clearance around all sides of the enclosureand air flow to the vents of the unit is not restricted. It is recommended to install the Output Expander in alocation that will facilitate easy access for wiring. It is also recommended that the Output Expander is installed inelectrical rooms, communication equipment rooms, closets or in an accessible area of the ceiling.Step 1Hook the upper tabs under the bottom edge of the DIN Rail.Step 2Push the enclosure against the DIN Rail mount until the upper tab clips over the upper rail.2.1 Enclosure RemovalThe Enclosure can be removed from the DIN Rail mount using the following steps:Step 1Insert a flat blade screwdriver into the hole in the tab at the top of the enclosure.Step 2Lever the tab up and rotate the unit off the DIN Rail mount.PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011 5

3 DC Power and Encrypted Module NetworkThe Output Expander incorporates encrypted RS-485 communications technology, and both module andnetwork power are supplied by the N+ and N- terminals.N+ N- NA NBNetwork communications inputfrom the Protege IntegratedSystem Controller or previousProtege moduleStandard Communications ConnectionConnection of the communications and DC supply should be performed according to the diagram shown above.It is important that the N+ Network Communications Power be 12VDC supplied from an independent batterybacked power supply unit such as the PRT-PSU-DIN capable of supplying the required voltage to all devices onthe RS-485 network.Warning:• The 12V N+ and N- Communication input must be supplied from only ONE point. Connectionsfrom more than one 12V supply may cause failure or damage to the Output Expander or devicesupplying network power.• The 330 Ohm EOL (End of Line) resistor provided in the accessory bag MUST be inserted betweenthe NA and NB terminals of the FIRST and LAST modules on the RS-485 network. These are themodules physically located at the ends of the RS-485 network cabling.First Module on RS-485 NetworkLast Module on RS-485 NetworkN+ N- NA NB N+ N- NA NB330R330RToNextModuleFromPreviousModuleEnd of Line Resistors6 PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011

4 Programmable OutputsThe Output Expander has 8 Programmable Outputs (PGM's). These PGM's are used to activate the Bell Sirens,Lighting Circuits, Door locks, Relay Accessory Products and other Automation Points.4.1 PGM Outputs 1 to 8The 8 PGM Outputs each have a FORM C output relay. The connection example below shows the control of anexternal LED indicator.0V+12V AUXLED1K5 OHMV+ V- NO C NC NO C NCPGM Connection (PGM 2 Shown)iSwitching inductive loads that can produce high back EMF voltages or large voltage induced spikescan cause the Output Expander to behave unexpectedly and should be avoided. A suitable isolationcircuit must be installed between the relay contacts of the Output Expander and the inductive load.PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011 7

5 Address ConfigurationThe address of the Output Expander is configured via programming and will require entry of the module serialnumber. The serial number can be found on the identification sticker as shown in the example below.Protege DIN Rail8 PGM Output ExpanderPRT-PX8 -DINHW VersionBoot VersionApp VersionLanguage00101.00.0000101.00.00001English100509500056A079FCSerial NumberPlease refer to the Protege Integrated System Controller Reference Manual for address programming details.8 PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011

6 LED IndicatorsThe Output Expander includes comprehensive front panel diagnostic indicators that provide modulecommunications status and current state information of PGM Outputs. In some cases an indicator may havemultiple meanings depending on the combination of indicators currently lit.6.1 Status IndicatorOutput Expander Front PanelThe Status Indicator displays module status of the Output Expander.StateContinuous FastFlashContinuous SlowFlashSingle FlashDescriptionModule attempting registration with ControllerModule successfully registered with ControllerModule communications activityiWhen the fault and status indicators are flashing alternately, the module is in the identification mode,enabling the installer to easily identify the module in question. Upon either a module update or theidentification time period set expiring, the module will return to normal operation.6.2 Fault IndicatorThe Fault Indicator LED is lit any time the module is operating in a non-standard mode.StateiContinuous SlowFlashConstantly OnDescriptionModule is in Boot Mode awaiting firmware updateModule is in error state and will flash an error code with the StatusIndicator. Refer to the Error Code Display section to determine theerror.When the Fault Indicator is on, the Status Indicator will show an error code. Refer to the Error CodeDisplay section for more information.6.3 Power IndicatorThe Power Indicator is lit whenever the correct module input voltage is applied across the N+ and N- terminals.PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011 9

7 Error Code IndicationWhen the Output Expander attempts to register or communicate with the system controller a registration errorcan be generated indicating that it was not successful.7.1 Error Code DisplayThe following table is only valid if the FAULT indicator is CONSTANTLY ON and the STATUS indicator isFLASHING RED.If the fault indicator is FLASHING the Output Expander requires a firmware update or is currently in firmwareupdate mode.The status indicator will FLASH RED with the error code number. The error code number is shown with a 250msON and OFF period (duty cycle) with a delay of 1.5 seconds between each display cycle.Flash1234567Error DescriptionUnknown Error CodeThe error code returned by the system controller could not be understood by the OutputExpander. Contact Integrated Control Technology.Firmware VersionThe firmware version on the Output Expander is not compatible with the system controller.To clear this error, update the module using the module update application.Address Too HighThe Output Expander address is above the maximum number of Output Expanders availableon the system controller. To clear this error change the address to one within the range seton the system controller, restart the Output Expander by disconnecting the power.Address In UseThe Address is already in use by another Output Expander. To clear this error set theaddress to one that is currently not occupied by a Output Expander. Use the view networkstatus command to list the attached devices, or the network update command to refresh theregistered device list.Controller Secured Registration Not AllowedController is not accepting any module registrations. To allow module registrations use thenetwork secure command to change the secure setting to not secured.Serial Number FaultThe serial number in the device is not valid. Return the unit to the distributor for replacement.Locked DeviceThe Output Expander or system controller is a locked device and can not communicate onthe network. Return the unit to the distributor for replacement.10 PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011

8 Mechanical DiagramThe mechanical diagram shown below outlines the essential details needed to help ensure the correct installationof the Output Expander.12VDC Pass ThroughPGM Outputs 5 & 6PGM Outputs 7 & 812VDC Pass ThroughStatus IndicatorsPGM Outputs12VDC InputRS-485 InputPGM Outputs 3 & 412VDC Pass ThroughPGM Outputs 1 & 212VDC Pass ThroughPRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011 11

9 Mechanical LayoutThe mechanical layout shown below outlines the essential details needed to help ensure the correct installation ofthe Output Expander.156.8mm90mmPRT-PX8-DIN FRONT44.1mm36.4mmPRT-PX8-DIN BACK90mm143.5mm156.8mm12 PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011

10 Technical SpecificationsiThe following specifications are important and vital to the correct operation of the Output Expander.Failure to adhere to the specifications will result in any warranty or guarantee that was providedbecoming null and void.Integrated Control Technology continually strives to increase the performance of its products. As a result thesespecifications may change without notice. We recommend consulting the ICT website(http://www.incontrol.co.nz) for the latest documentation and product information.Power SupplyDC Input Voltage 12VDC (+/-10%)Operating CurrentLow Voltage CutoutLow Voltage RestoreCommunicationRS-485OutputsPGM OutputsInputsTamperDimensions80mA (Typical)8.7VDC10.5VDCIsolated Module Network8x FORM C Relays, 7A 250V Max1 (Normally Closed)Dimensions (L x W x H) 156.8 x 90 x 60mm (6.17 x 3.54 x 2.36")WeightTemperatureOperatingStorageHumidityi482g (17oz)5˚- 55˚ Celsius (41˚ - 131˚ Fahrenheit)-10˚- 85˚ Celsius (14˚ - 185˚ Fahrenheit)0%-85% (Non-Condensing)It is important that the unit is installed in a dry cool location that is not affected by humidity. Do notlocate the unit in air conditioning or a boiler room that can exceed the temperature or humidityspecifications.PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011 13

11 Ordering InformationPlease use the following product codes when placing an order for the Protege DIN Rail 8 PGM Output Expander.• PRT-PX8-DINManuals and additional literature are available on the ICT Website (http://www.incontrol.co.nz) under the Supportsection.14 PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011

12 WarrantyIntegrated Control Technology (ICT) warrants its products to be free from defects in materials and workmanshipunder normal use for a period of one year. Except as specifically stated herein, all express or implied warrantieswhatsoever, statutory or otherwise, including without limitation, any implied warranty of merchantability andfitness for a particular purpose, are expressly excluded. ICT does not install or connect the products andbecause the products may be used in conjunction with products not manufactured by ICT, ICT cannot guaranteethe performance of the security system. ICT's obligation and liability under this warranty is expressly limited torepairing or replacing, at ICT's option, any product not meeting the specifications. In no event shall ICT be liableto the buyer or any other person for any loss or damages whether direct or indirect or consequential or incidental,including without limitation, any damages for lost profits, stolen goods, or claims by any other party caused bydefective goods or otherwise arising from the improper, incorrect or otherwise faulty installation or use of themerchandise sold.Protege® and the Protege® Logo are registered trademarks of Integrated Control Technology Limited.PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011 15

13 ContactIntegrated Control Technology welcomes all feedback.Please visit our website (http://www.incontrol.co.nz) or use the contact information below.Integrated Control TechnologyP.O. Box 302-340North Harbour Post CentreAucklandNew Zealand11 Canaveral DriveAlbanyNorth Shore City 0632AucklandNew ZealandPhone: +64-9-476-7124Fax: +64-9-476-7128Email:Web:sales@incontrol.co.nz or support@incontrol.co.nzwww.incontrol.co.nz16 PRT-PX8-DIN Protege DIN Rail 8 PGM Output Expander Installation Manual | Sept 2011

227-5095-002