Kemet Virtual Brochure

Forming Machines • Welding Machines • Kilns • Furnaces2000 19991 OF 22 SEIKEN TAP-1RII 20-KGPOWDER FORMING MACHINES1 OF 14 MECHA-KOKI HI-MECHAMODEL HTW-PW PELLET WELDING MACHINES1 OF 17 CLADAN MODEL FF19E038ELECTRIC CERAMIC FIRING KILNS(23) POWDER FORMING MACHINESMauldin, South Carolina Preview Location22 – SEIKEN MODEL TAP-1RII 20-KG POWDER FORMING MACHINES,S/N 48 A# 30175, S/N 49 A# 30176, S/N 50 A# 30177, S/N 51 A# 30178,S/N 52 A# 30179, S/N 53 A# 30180, S/N 54 A# 30455, S/N 55 A# 30456,S/N 56 A# 30457, S/N 57 A# 30458, S/N 58 A# 30459, S/N 65 A# 30437,S/N 66 A# 30438, S/N 67 A# 30439, S/N 68 A# 30440, S/N 69 A# 30441,S/N 70 A# 30442, S/N 71 A# 30443, S/N 72 A# 30444, S/N 73 A# 30445,S/N 74 A# 30446, S/N 75 A# 30447 (ALL 2000), Pellet Height 0.5mmto 2mm, Pellet Width 0.5mm to 2mm, Pellet Thickness 0.5mmto 1.5mm, Internal Wire Length Height Times 2/3 or More, External WireLength 6.5mm to 8mm, Wire Diameter 0.2mm to 0.24mm, Pellet GrossDensity 4.5 to 6.5g/cm3, Wire Bend 2 Angle° in the Width & ThicknessDirection, Annealed or Unannealed Wire, Production Speed 1 SecondPer Stroke, Horizontal Pressing, Maximum Pressure 20-kG, AC ServoDrive, Maximum Press Opening 10mm in Micron Steps by the GraphicPanel Controller, Fixed Powder Feed Rate, Adjustable Wire Length,Sequencer & Graphic Panel Controller1 – SEIKEN MODEL TAP-1RI TANTALUM FORMING MACHINE, S/N 1(1998), Same Specifications As Above(14) PELLET WELDING MACHINESSimpsonville, South Carolina Preview Location5 – MECHA-KOKI HI-MECHA MODEL HTW-PW PELLET WELDINGMACHINES, S/Ns 9101227-3/5, 9110241-1/2 (BOTH 1999), N/A (1992),51208, 50905 (BOTH 1990) Feeding Works: 0.81mmW X 0.81mmHX 1.14mmL & Length Range .085mm to 1.02mm, 0.93mmWX 1.87mmH X 1.37mmL & Length Range 1.09mm to 1.22mm,1.19mmW X 2.02mmH X 3.09mmL & Length Range 2.21mmto 2.90mm, 1.49mmW X 2.99mmH X 4.37mmL & Length Range3.68mm to 4.45mm, Maximum Lead Wrap 0.03mm, Maximum LeadBend 0.2mm, Maximum Lead Cut Flash 0.02mm; Teflon Tape: 37.5mmID (Paper Roll, Approximate Thickness 3mm); Aluminum Coil (Strip):Material A1100-HH (JIS-H-4000), Width 7.0mm, Thickness 1.0mm,Maximum Slit Flash 0.03mmMatamoros, Tamaulipas, Mexico Preview Location9 – MECHA-KOKI HI-MECHA MODEL HTW-PW PELLET WELDINGMACHINES, S/Ns 9101227-1/5, 9110243-1/2, 9110551-1/3 (ALL 1999),9440109-1/2, 9541110-1/2 (BOTH 1995), 9211208-1/3 (1992),9000607 (1991), 51203.2, 9000242-1/4, (BOTH 1990)Same Specifications As Above(20) CERAMIC FIRING KILNSSimpsonville, South Carolina Preview Location17 – CLADAN MODEL FF19E038 ELECTRIC CERAMIC FIRING KILNS, (1) S/N N/A (ALL 1993),(8) S/Ns N/A (ALL 1992), (8) S/Ns N/A (ALL 1990), Maximum Chip Size 0.08"to 0.22"L X 0.05" to 0.25"W, Maximum Temperature 1200°C, Chamber Size 20" DiameterX 14-1/8"H, Elevating Actuator, Air Injector, Exhaust Vent, (2) Thermocouple Probes,(8) Banks of Hairpin Heaters, Overtemp Alarm, Digital Overtemp Controller, Heater CurrentMeter, Safety Lock, (5) Dwyer Flow Gages, Programmable in 6 Steps, Model 1300 Directsthe Max-V Set Point Commands, Halmar SCR Power Controller, 8-KVA Dry-Type Transformer3 – CLADAN INCETEC MODEL 308 ELECTRIC CERAMIC FIRING KILNS, S/Ns 1012, 1017, 1019(ALL 1990), Same Specifications As AboveCONTROLLED ATMOSPHERE THICK FILM FURNACESSimpsonville, South Carolina Preview Location3 – WATKINS-JOHNSON 9-ZONE ELECTRIC CONVEYORIZED CONTROLLED ATMOSPHERETHICK FILM FURNACES,(2) MODEL 14C0-154, S/Ns 4436, 4437 (BOTH 1990),(1) MODEL 24CD-72, S/N 227608 (1990),All With Opening Size 17" X 6", Overall Length 28', Chamber Length 20', Nominal ChamberSize 10-3/10" X 1-1/2" With 4" Vertical Clearance, Preheat Zone 57-3/4", Firing Zone #218-1/4", Firing Zone #3 28-7/8", Firing Zone #4 18-1/4", Firing Zone #5 8-5/8", Firing Zone #65-3/4", Firing Zone #7 9-5/8", Insulated Cooling Zone 18-5/8", Forced Air Cooling Zone 60",Maximum Preheat Zone Temperature 600°C, Maximum Firing Zone Temperature 1000°C,Wire Chain Conveyor Width 14", Conveyor Speed Range 2 to 20 IPM, Ceramic Hearth Plates,Anafaze Model IAS High Temperature Alarm, Product Alarm, Model WJ-991 ThermoguardTemperature Control With Digital Readout, Model WJ-998 Temperature Control With DigitalReadout, Variable Speed Conveyor3 – SIERRA THERM ELECTRIC CONVEYORIZED CONTROLLED ATMOSPHERE THICK FILMFURNACES,(2) MODEL 1K36-263C5-9-14A, S/Ns 7062, 7394 (BOTH 1998), With Overall Length 30',Chamber Length 26',(1) MODEL 1K25-213C4-9-12A, S/N 7017 (1999), With Opening Size 28" X 6", Overall Length31', Chamber Length 23',All With Opening Size 28" X 6", Wire Chain Conveyor Width 16", Easi 12"W X 26'L Return BeltConveyor, Gateway & Dell Personal ComputersMonterrey, Mexico Preview Location1 – SIERRA THERM MODEL 1K36-263C5-9-14A ELECTRIC CONVEYORIZED CONTROLLEDATMOSPHERE THICK FILM FURNACE, S/N 7234 (1998), Opening Size 28" X 6", OverallLength 30', Chamber Length 26', Wire Chain Conveyor Width 16", Easi Model SB-40012"W X 26'L Return Belt Conveyor, Gateway & Dell Personal Computers4To view a complete asset list, visit our website @ www.dovebid.com

Forming Machines • Welding Machines • Kilns • Furnaces1998HARPER MODEL HOU-13142949-ZONE TWIN HEARTH ELECTRIC PUSHER-TYPETUNNEL FURNACE1998SIERRA THERM MODEL 1K36-263C5-9-14AELECTRIC CONVEYORIZEDCONTROLLED ATMOSPHERE THICK FILM FURNACESTWIN HEARTH PUSHER-TYPETUNNEL FURNACESSimpsonville, South Carolina Preview Location1 – HARPER MODEL HOU-1314294 9-ZONE TWIN HEARTH ELECTRICPUSHER-TYPE TUNNEL FURNACE, S/N AX007 (1998), Gas TightConstruction Used With Air Atmosphere, High Heat Chamber: MaximumCharge Size 13"W (331mm) X 5-7/8"H (150mm) X 6-3/4"L (172mm),Entrance Throat Length 18" (457mm), Chamber Length 179-3/4"(4566mm), Thermal Baffles Between Zones 3" (76mm) Thick, MaximumTemperature 2642°F (1450°C), Maximum Operating Temperature 2552°F(1400°C), (18) Independent Control Heat Zones, (18) 4-Element SiliconCarbide Element Sets; Insulated Cooling Chamber: Chamber Length 81"(2057mm), (2) Thermocouples; Water-Jacketed Cooling Chamber:Chamber Length 90" (2286mm), (2) Thermocouples; Atmosphere System:Air, 2700 SCPH With Exhaust Monitoring, 4000 CFH @ 15 PSI; MaterialHandling System: Type FDA Fully-Automated Closed-Loop ContinuousCycling Material Handling System, Maximum Main Pusher Speed 41 IPH(1041mm/min), Mechanical Entrance Pusher, Entrance Chamber,Pneumatic-Actuated Entrance Door, Pneumatic-Actuated Separator Table,Dual Main Pushers With High Speed Approach & Retract & Adjustable SlowSpeed Push Rate, Exit Registration, Mechanical Discharge Pusher,Mechanical Return Conveyor Pusher, Gravity Roller Return Conveyor;Allen-Bradley Model 5/20 PLC Control, Micron Millennia 200-MHz PentiumComputer System, Temperature & Automation Control System1 – HARPER MODEL HOU-135-180-PTKA-31-FDA 9-ZONE TWIN HEARTHELECTRIC PUSHER-TYPE TUNNEL FURNACE, S/N AT043 (1995), SameSpecifications As AboveMonterrey, Mexico Preview Location1 – HARPER MODEL HOU-135-180-PTKA-27-FDA 9-ZONE TWIN HEARTHELECTRIC PUSHER-TYPE TUNNEL FURNACE, S/N AT020 (1995), SameSpecifications As Above19901 OF 3 WATKINS-JOHNSON MODEL 14C0-1549-ZONE ELECTRIC CONVEYORIZEDCONTROLLED ATMOSPHERE THICK FILM FURNACESNEED HELP WITH SHIPPING?As a courtesy to our buyers,DoveBid can provide contact information for shippingcompanies scheduled to attend this auction.For details, please visit DoveBid’s Websiteat www.dovebid.com or call ourcustomer service department at 800.665.1042.5To schedule an auction, call our Connecticut Office • Phone 203.488.6650

Ovens • Trim Form & Tape Machines • Vacuums1995 1995PARTIAL VIEWS OF BTU MODEL DR252-8-99DS ELECTRIC CONVEYORIZED NON-EXPLOSIVE DRYING OVENSTO19976VIEW OF BTUELECTRIC CONVEYORIZEDNON-EXPLOSIVE DRYING OVENSNON-EXPLOSIVE DRYING OVENSSimpsonville, South Carolina Preview Location7 – BTU ELECTRIC CONVEYORIZED NON-EXPLOSIVE DRYING OVENS,(4) DR252-8-99DS, S/Ns KFSC15, KFSC17, KFSC18, KFSC25 (ALL 1995),(3) MODEL DR252-6-72D, S/Ns KFSC2, KFSC3, KFSC4 (ALL 1992),All With Opening Size 25" X 5-1/2", Overall Length 13', Chamber Length 9',Wire Chain ConveyorBOX OVENSSimpsonville, South Carolina Preview Location8 – DESPATCH MODEL FCH2-36 60-KW SINGLE-DOOR ELECTRIC BOX OVENS,S/Ns 156858 (1997), 153980-L, 153981-L (BOTH 1995), 149509, 151093-L,151094-L, 151096-L (ALL 1993), N/A, Chamber Size 39" X 48" X 48",Maximum Operating Temperature 1350°F (732°C), Love Digital TemperatureControl, Honeywell Circular Chart Recorder, RI Dimension LCD Interface1 OF 8 DESPATCHMODEL FCH2-36 60-KWSINGLE-DOOR ELECTRIC BOX OVENSTRIM, FORM & TAPE MACHINESMatamoros, Tamaulipas, Mexico Preview Location3 – MECHA HI-MECHA SIGMA-F TRIM, FORM & TAPE MACHINES, (1) MODEL HS-44A,S/N 2012-1/2 (2000), (2) MODEL N/A, S/Ns 9711006.5 (1999), 9761209 (1997)TURBO VACUUMSSimpsonville, South Carolina Preview Location3 – SPENCER 40-HP TURBO VACUUMS,(1) MODEL 2540-H, S/N N/A, With 2200 SCFM,(2) MODEL 2540-H-MOD, S/Ns 272678, 280205, With 1825 SCFM,Both With 3500 RPM, Inlet Pressure 14.7 PSIA@See us on the webwww.dovebid.comTo view a complete asset list, visit our website @ www.dovebid.com

Global Provider of Capital Asset Auction & Valuation ServicesOver $3.3 billion sold in 22 asset categories and over $34 billion in assets valued across 15,000 appraisals since 1990.Auctioneers, Sale Advisors & AppraisersWorldwide Headquarters1241 East Hillsdale BoulevardFoster City, California 94404650.571.7400 • Fax: 650.572.1502www.dovebid.comCustomer Service 800.665.1042®PresortedFirst Class MailU.S. PostagePAIDDetroit, Mich.Permit No. 1904Return Service RequestedFor further information,please contact our Connecticut OfficePhone 203.488.6650DoveBid Webcast Auction• Bid live in Simpsonville, South Carolina• Bid live over the internet at www.dovebid.comSurplus to theongoing operations ofKEMET ELECTRONICSCORPORATIONWEBCAST AUCTIONMay 13, 2003World Class Aluminum,Ceramic & TantalumCapacitor ManufacturerOver 100 upcoming auctions • www.dovebid.comAPRIL 22: NEWELL RUBBERMAID, INC. – (WEBCAST) New Date. (14) PlasticInjection Molders to 550-Ton X 85-Oz, Automatic Bar Machines & Chuckers, Cold Header,Ancillary Plastics, Stamping, Toolroom, Finishing & Printing Equipment. Manitowoc, WI USAAPRIL 22: BENEDICT MILLER, INC. – (WEBCAST) Major Supplier of Alloy Steels,Featuring: 3,000,000-Lb. Steel Inventory, Rotary Surface Grinder, CNC Plasma Cutter, Saws,Finishing, Heat Treat & Material Handling Equipment. Lyndhurst, NJ USAAPRIL 23: NEW CENTURY GLOBAL NETWORK – (ONLINE)Complete Closure of Wireless Telecommunications Network Provider. FeaturingTelecommunications Equipment. DoveBid.com (Osaka, Japan)APRIL 24: SANDISK CORP. – (ONLINE)PCB Assembly and SMT Equipment. DoveBid.com (Sunnyvale, CA USA)APRIL 24: AN AGILENT TECHNOLOGIES PRODUCT AUCTION – SALE #26– (ONLINE) Hewlett Packard and Agilent Electronic Test And Measurement Equipment.DoveBid.com (Roseville, CA USA)APRIL 24: TELLABS, INC. – (ONLINE) State-of-the-Art PCB/SMT Facility. Manufacturing& Production Equipment, Test & Measurement. DoveBid.com (Ronkonkama, NY USA)APRIL 29: CORNING OPTICAL FIBRES – (WEBCAST)Racking & Facilities, Support Equipment. Flintshire, United KingdomNEED HELP WITH FINANCING?As a courtesy to our buyers, DoveBid canprovide contact information for companiesoffering leasing and/or financing services.For details, please visitDoveBid’s Website atwww.dovebid.com or callour customer servicedepartment at800.665.1042©2003 DOVEBID, ALL RIGHTS RESERVED • PRINTED IN USA • #KEME4743 • CA Bond# 57BSBAI7624DoveBid and the DoveBid logo are registered trademarks of DoveBid, Inc.Auctioneers & Licenses: DoveBid, Inc. #001438F, Kirk Dove #001441RComplete Terms & Conditions are contained in the Sale Catalog and on the website at www.dovebid.com.Please review the Terms and Conditions prior to placing bids on any items. Worldwide Headquarters: Foster City, California