320 SKID STEER LOADER - Cesco Used Equipment

320SKIDSTEER LOADER66 HORSEPOWERCOMMERCIAL WORKSITE PRODUCTS

300 SERIES320 SKID STEER LOADER SPECIFICATIONSStandard Equipment• Adjustable Armrests• Adjustable Foot Pedals• Automatic Fan Belt Tensioner• Automatic Preheat• Automatic Shutdown with Alarm• Auxiliary Hydraulics Operation Presence System• Convenient Front and Rear Tie Downs• Deluxe Headliner• Deluxe Instrumentation EMU with OperatorSelectable Monitoring: Hour Meter, Engine RPM, Battery,Voltage, Diagnostics, EMU Configuration, Engine CoolantTemperature and Hydraulic Oil TemperatureLED Warning Indicators: Glow Plug, Seat Switch, Seat Belt,Door Open, Auxiliary Hydraulics, Park Brake Engaged,Two-Speed Engaged, Stop, Low Engine Oil Pressure,Engine Coolant Over-Temperature, Battery Not Charging,Air Filter Restriction, Hydraulic Filter Restriction• Environmental Drains for All Fluid Reservoirs• Front and Rear Halogen Work Lights• Four Grab Handles• Integral Cab Boom Lock• John Deere 250 Series PowerTech TurbochargedEngine — meets EPA Tier II non-road emissionsregulations• John Deere COOL-GARD ® Extended Life Engine Coolant• John Deere Hydraulic Cylinders with CushionedBoom Cylinders• John Deere Plus-50 ® 10w30 Initial Engine Oil Fill 2• Patented John Deere Quik-Tatch • Patented John Deere Vertical-Lift Boom withSuperior Visibility• Quick-Check Hydraulic Fluid Level Sight Glass• Quick-Pivot ROPS• Rear Window• ROPS/FOPS Operator Structure• Seat Belt with Auto Recoil• Triple Interlock Operator Presence Control System• Water-Shedding Deluxe Vinyl Seat• Wet Disk Brakes• Three-Micron Hydraulic Filter• Five-Micron Primary Fuel Filter and Water SeparatorBring productivity to a new level.• Smooth and quiet 66-hp, high-torque, four-cylinderturbocharged Deere diesel with exclusive precisionjointconnecting rods and hydraulic valve-liftersdelivers exceptional reliability, power, and torque rise.• Large, standard 12x16.5-inch tires give the 320unsurpassed stability, traction, and ground clearance.• Boost your productivity with industry leading optionssuch as hydraulic Quik-Tatch , self-leveling bucket,high-flow hydraulics, and a comfortable HVAC system.• Overhead panel features sealed easy-to-operate rockerswitches and comprehensive instrumentation that givesvital operating information at a glance.Engine:Model .................................................................Displacement......................................................Cylinders ............................................................Gross Horsepower ..............................................Net Horsepower..................................................Rated Engine Speed ...........................................Fuel Capacity......................................................Performance:Tipping Load.......................................................SAE Rated Operating Capacity 1 ...........................ROC with Optional Counterweights .....................Breakout Forces:Boom..................................................................Bucket with Heavy-Duty Foundry........................Bucket with Heavy-Duty Construction.................Ground Speed:Single Speed ......................................................Maximum Axle Torque ........................................Tractive Effort .....................................................Operating Weight................................................Hydraulics:System Hydraulic Pressure @ Couplers ..............Standard Pump Flow ..........................................Total Pump Flow with High-Flow Option .............Hydraulic Horsepower:Standard Flow (calculated) .................................High Flow (calculated) ........................................Transmission:Type ...................................................................System High-Pressure Relief ..............................Electrical System:Alternator Output ................................................Battery Cold Cranking Amps ...............................Dimensions:Length without Bucket........................................Length with Bucket.............................................Width without Bucket .........................................Height to ROPS...................................................Height to Hinge Pin.............................................Dump Reach:Heavy-Duty Foundry Bucket ...............................Heavy-Duty Construction Bucket ........................Dump Angle (At Full Height)................................Bucket Rollback (At Ground) ...............................Wheelbase..........................................................Ground Clearance...............................................Angle of Departure .............................................Standard Tire Size ..............................................John Deere 4024T149 cu. in. (2.4 L)466 hp (49.2 kW)62 hp (46.2 kW)2,800 rpm16 gal. (60.6 L)3,900 lb. (1769 kg)1,950 lb. (885 kg)2,300 lb. (1043 kg)3,100 lb. (1406 kg)5,500 lb. (2495 kg)3,900 lb. (1769 kg)6.8 mph (10.9 km/h)4,725 lb.-ft. (6407 Nm)7,100 lbf (3220 kgf)6,435 lb. (2919 kg)3,450 psi19 gpm (72 L/min.)31 gpm (117 L/min.)38 hp (28.3 kW)61 hp (45.5 kW)Manual–Hydrostatic5,000 psi70 amps750102 in. (2591 mm)125.8 in. (3195 mm)69.8 in. (1773 mm)76.8 in. (1951 mm)115.2 in. (2926 mm)28.1 in. (714 mm)35 in. (889 mm)45 degrees35 degrees42.3 in. (1074 mm)9.6 in. (244 mm)27 degrees12x16.5 10 PR SKSOptions and Accessories• Air Conditioning withHeater/Defroster• Backup Alarm• Battery, 925 cca• Block Heater• Cab Enclosure• Chrome Exhaust Stack• Demolition Door• Dual Flashers• Floor Cover Plates• Hand Controls• Heater/Defroster• High-Flow Hydraulics• Horn• Hydraulic Quik-Tatch• Hydraulic Self-Leveling• Quik-Tatch Weights• Rear Weight Brackets• Rearview Mirror Kit• Shoulder Belt• Side Window Kit• Single-Point Lift Kit• SMV Sign Kit• Spare Tire and Wheel• Suspension Seat• Tire Options: Flotation, FoamFilled, Solid, HD Galaxy• Top Window• Vinyl Cab Enclosure Kit• Warning Beacon Kit• 3-Inch Seat Belt• 8-Button Handle Kit• 12-Volt Receptacle KitNote: Where applicable, dimensionsand performance specifications are inaccordance with Society of AutomotiveEngineers (SAE) and ISO standards.Dimensions given are with skid steerequipped with standard tires. John Deerecomplies with the requirements of ISO9001 as registered with QMI.1Operating capacity rated with standard tiresand foundry bucket according to SAE standardJ818 operating capacity to equal nomore than one half the tip load.www.skidsteer.com• Impressive breakout force, 35-degree rollback, 45-degreedump, 115-inch load height, and true vertical lift providegreater stability and reach for maximum productivity.John Deere Standard Warranty ....................... One-year unlimited hours2500-hour engine oil change intervals whenJohn Deere Plus-50 oil and John Deere oilfilter is used.This literature has been compiled for worldwide circulation. While general information, pictures, and descriptions are provided,some illustrations and text may include finance, credit, insurance, product options, and accessories NOT AVAILABLE in allregions. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS. John Deere reserves the right to change specifications, design,and price of products described in this literature without notice.NOTHING RUNS LIKE A DEERE