Product Catalogue & Trade Price List 2011/12 - Solid State Security

solidstatesecurity.co.uk

Product Catalogue & Trade Price List 2011/12 - Solid State Security

Product Catalogue &

Trade Price List

2011/12

Design

Installation

Commissioning

Service & Maintenance

Certification

Supply

4Fire Alarm Systems

4Voice alarm & public

address systems

4Disabled Refuge Systems

4Call systems

4Induction loop systems


With over 30 years’ experience in the design, installation and maintenance of fire

detection, nursecall, voice alarm and public address systems, Solid State is BAFE SP203

accredited, an affiliated member of the NICEIC (National Inspection Council for Electrical

Installation Contracting), the FIA (Fire Industry Association) and the IFPO (Institute of Fire

Prevention Officers).

We are the longest established member of a specialist group of life safety companies, one

of whom specialises in the manufacture of voice alarm equipment and whose systems are

currently protecting millions of people worldwide. As the only installation company within

the group, Solid State is in the unique position of understanding all aspects of interfacing

voice alarm and fire alarm equipment and is regularly called upon by its sister companies

to assist them in the selection, completion, review and maintenance of pre-launch test

installation for all of their new products.

We offer a range of specialist services (including system design, equipment supply,

installation, commissioning, verification, certification, service and maintenance) not only

to end users and facility management companies but also to other installation companies

requiring assistance with larger projects.

B FE

FIR/G/10006 SP203 APPROVED

This price list applies to all UK orders placed for delivery on or after 1st September 2011 and supersedes all previous

Solid State price lists.

Prices shown are our current UK trade prices in pounds (£) Sterling. Trade discounts may apply - contact our sales desk for

details.

Standard carriage is free on orders over £300.00 nett goods. Standard carriage on orders less than £300.00 nett goods will

be charged at £10.00 (UK mainland only). Carriage charges for other areas are available on request.

An on-site delivery service is available at no extra cost. However, the nature of on-site deliveries (lack of access, etc.),

means that goods often have to be signed for by someone other than your selected representative. Once a signature has

been obtained, neither ourselves or our carrier can be held responsible for the goods. Although we will endeavour to

provide proof of delivery wherever possible, no compensation can be claimed for any consequential loss.

An inspection and restocking charge of 30% will be made on returns (minimum £5.00 per consignment).

Minimum invoice value = £20.00 + VAT. VAT is charged extra at the current rate.

All goods supplied and services provided are subject to our current Conditions of Sale, as detailed on our Account

Application Form, copies of which are available on request. Copies of our Customer Returns Policy are also available on

request.

Errors and omissions excepted. Every effort has been made to ensure the accuracy of this price list but no responsibility

can be accepted by Solid State for any mistakes. Prices are subject to change without prior notice.

Our UK Sales Desk is open 9.00am to 5.00pm Monday to Friday, except for bank holidays, during our annual stocktake

(normally the first two working days in May) and over our Christmas shutdown period.

Orders can be placed by telephone, fax or email using the details shown below.

Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS

Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

6

solidstatesecurity.co.uk


CONTENTS

SERVICES

System Design .................................................................................................................................................................... 4

Installation .......................................................................................................................................................................... 4

Commissioning .................................................................................................................................................................. 4

Verification & Certification ................................................................................................................................................ 5

Service & Maintenance ...................................................................................................................................................... 5

Equipment Supply .............................................................................................................................................................. 5

PRODUCTS

CONVENTIONAL FIRE ALARM EQUIPMENT

SFP Standard 2-8 Zone Conventional Fire Panels (LPCB approved to EN54-2/4)............................................................ 6

SFP Economy 2-8 Zone Conventional Fire Panels (to EN54-2/4) .................................................................................... 6

SEP Range 3 Zone Automatic Extinguisher Panel (to EN12094-1) .................................................................................. 7

Fire Alarm Ancillaries (remote indicators, relays, device isolators and sounder circuit extenders).............................. 8

EN54-4 Power Supplies ...................................................................................................................................................... 8

Non-EN54-4 Power Supplies .............................................................................................................................................. 8

Manual Call Points .............................................................................................................................................................. 9

Series 65 (Apollo) Conventional Smoke & Heat Detectors .............................................................................................. 9

Orbis (Apollo) Intrinsically Safe Smoke & Heat Detectors .............................................................................................. 9

Beam Detectors .................................................................................................................................................................. 9

Bells & Sirens ...................................................................................................................................................................... 9

Strobes, Bedhead Sounders, Base Sounders, Strobes / Beacons & Sounder Strobe Combinations ............................ 10

Electromagnetic Door Retainers ...................................................................................................................................... 10

Vibrating Pads .................................................................................................................................................................. 10

24V VRLA Battery Packs .................................................................................................................................................. 10

2-WIRE FIRE ALARM EQUIPMENT

SFP AlarmSense 2-8 Zone Two-Wire Fire Panels (to EN54-2/4) & Ancillaries ................................................................ 11

ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT

SXFP 1-2 Loop Networkable Analogue Addressable Fire Panels (to EN54-2/4)............................................................ 12

BS5839-6 Hush Buttons .................................................................................................................................................... 13

XP95 Analogue Addressable Peripherals ........................................................................................................................ 14

Discovery Analogue Addressable Peripherals ................................................................................................................ 15

C-TEC manufactured Analogue Addressable Peripherals ............................................................................................ 15

Hochiki ESP Analogue Addressable Peripherals ............................................................................................................ 16

VOICE ALARM SYSTEMS

SigNET LS Distributed Voice Alarm System .................................................................................................................... 17

Integrity 2-64 Zone Voice Alarm System ........................................................................................................................ 17

Linx Single Zone Voice Alarm System.............................................................................................................................. 18

AVAC Voice Alarm System................................................................................................................................................ 18

Loudspeakers .................................................................................................................................................................... 18

Background music sources .............................................................................................................................................. 19

General VA ancillaries ...................................................................................................................................................... 19

Racks & Rack Mount Accessories .................................................................................................................................... 19

DISABLED REFUGE / EMERGENCY VOICE COMMUNICATION EQUIPMENT

SigTEL Emergency Voice Communication System (to BS5839-9) .................................................................................. 20

DISABLED PERSONS TOILET ALARMS

SNC951 Disabled Persons Toilet Alarm Kits .................................................................................................................... 21

800 SERIES CONVENTIONAL CALL SYSTEM

SNC951 Disabled Persons Toilet Alarm Kits .................................................................................................................... 21

800 Series Conventional Call System .................................................................................................................... 21/22/23

ADDRESSABLE CALL SYSTEMS / INFRARED STAFF PROTECTION SYSTEMS

Quantec Addressable Call System .................................................................................................................... 24/25/26/27

INDUCTION LOOP EQUIPMENT

SPDA Range Induction Loop Equipment and Ancillaries.......................................................................................... 28/29

DIMENSIONS

Key control panel measurements / mounting details ................................................................................................30/31

3


SERVICES

SYSTEM DESIGN

As a BAFE-SP203 accredited company, Solid State offers a comprehensive design and

specification service that can encompass everything from the marking up of plans to recognised

British and European standards, site surveys and the provision of detailed bills of quantities.

Our sales team have expert knowledge of a wide range of specialist life-safety systems and aim

to deliver the highest levels of customer support. The team are on-hand to demonstrate

products on site and respond to any technical enquiries or questions you may have.

System design prices available on application

INSTALLATION

Solid State has the technical expertise and project management experience to fulfil the

complex electrical requirements of today’s multi-purpose sites ranging from a complete new

installation to the simple upgrade of an existing system.

Our multi-skilled installation engineers are trained to exacting standards in all areas and we

insist they all complete NVQ Levels 2 and 3 in Electrical Installation and attend FIA and IFPO

training courses on a regular basis. Furthermore, our engineers are encouraged to study

Electrical Installation at HNC level and to attain NICEIC Test and Inspection Certificates.

Solid State’s status as an NSI Fire Gold Award winner and BAFE SP203 registered firm proves we

are a reliable, reputable and professional company and allows us to certify our work with

certificates that are recognised by most major approval/insurance bodies.

All of the systems Solid State install are ‘open protocol’. This means that the owner of the

system has complete control over all system modifications and maintenance.

Installation prices available on application

COMMISSIONING

The inspection, testing and commissioning of electrical systems is absolutely vital to ensure they

are working and in good order. Solid State's technical expertise provides a commissioning

platform that is second to none. We can commission virtually any type of life safety system to

the requirements of BAFE SP203 and can satisfy even the most demanding specifications using

some of the most experienced engineers in the industry.

Commissioning prices available on application

Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

4

solidstatesecurity.co.uk


VERIFICATION & CERTIFICATION

In the current climate of risk assessment, proof that your life safety systems have been

designed, installed, commissioned and maintained to the required standards is essential. Solid

State’s status as a BAFE SP203 Registered Firm allows us to issue appropriate fire certificates for

every system we work on. We also offer an advisory service to businesses seeking to comply

with the Regulatory Reform (Fire Safety) Order.

Verification and certification prices available on application

SERVICE & MAINTENANCE

Solid State’s BAFE SP203 accredited service and maintenance department currently manages

over 300 national, regional and single site contracts for organisations as diverse as Vue Cinemas,

Cumberland Infirmary, Booths Supermarkets and Wigan & Leigh college. We offer a full 24hour

call out service across the UK mainland and will service any electrical system to the

relevant British standards.

We have a wide range of maintenance contracts available to meet any requirement and we

pride ourselves on our ability to offer all our clients, whatever their size, the same level of

support and on being able to deliver the industry’s best maintenance packages. Testament to

this is the large number of unsolicited testimonials we regularly receive and the fact that our

maintenance contract renewal stands at over 95% per annum.

Unlike many other nationwide service and maintenance providers, our customers can speak

directly to an experienced call-out engineer which often leads to problems being resolved

without the need for an emergency site visit and the extra expense that often goes with it.

Service and maintenance prices available on application

SYSTEM SUPPLY

Our comprehensive and cost-effective supply service is extremely popular with electrical

contractors, electrical wholesalers, local authority works departments and many other

organisations that prefer to undertake their own electrical installations. We can supply you with

an extensive range of fire alarm control panels and ancillaries, voice alarms, call systems, staff

protection systems and disability equipment. Please refer to our full product listing in the next

section of this price list. Excellent discounts are available for quantity orders.

Trade prices for all our equipment can be found on pages 6 to 29 of this document

5


Conventional Fire alarm equipment

SFP 2-8 ZONE EN54 FIRE PANELS

NOW WITH

KEYPAD/KEYSWITCH ENTRY

IMPROVED USER INTERFACE

TWO ONBOARD RELAYS*

• LPCB certified to the latest versions of

EN54 Parts 2 and 4*

• Re-engineered to include an improved

user interface with colour-coded

buttons and combined keypad/keyswitch

entry to access level 2

• 2, 4 or 8 zone circuits (dependent on

model purchased)

• Four conventional sounder circuits

• Integral 1.5A EN54-4/A2 switch mode PSU

• Wide range of engineering functions

including zone test, coincidence*, zone

delay* and non-latching zones*

• Two on-board relays (Fire and Fault)*

• Two open-collector outputs (Remote

and Reset)

• ‘Class change’ and alert inputs

• Installer-friendly design accommodates

easy first fix and straightforward

maintenance

• Multiple indicators

• End of line units included (one per zone)

• Ancillary system expansion connections*

provided for up to eight two-wire

repeaters (one SFP761 network driver

card required per system) and optional

SFP relay boards

• Space for two x 12V 3.2Ah VRLA batteries

• Economy SFP panels (without on-board

relays, system expansion connections,

coincidence, zone delay or non-latching

zone facilities) are also available

Features marked * not available on SFP

Economy panels

NEW

NEW

SFP STANDARD LPCB CERTIFIED 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

SFP702-4 SFP Standard 2 zone panel

Keypad/keyswitch entry. Max. 2 x 3.2Ah batteries

LPCB certified to EN54-2/4 (no. 176a)

£124.37

SFP704-4 SFP Standard 4 zone panel

Keypad/keyswitch entry. Max. 2 x 3.2Ah batteries

LPCB certified to EN54-2/4 (no. 176a)

£156.82

SFP708-4 SFP Standard 8 zone panel

Keypad/keyswitch entry. Max. 2 x 3.2Ah batteries

LPCB certified to EN54-2/4 (no. 176a)

£237.93

SFP760 SFP 8 zone repeater panel, keypad/keyswitch entry

(Max. 2 x 3.2Ah batteries). Max 8 repeaters per system

£180.85

S-KEY Spare key for use with SFP keypad/keyswitch panels £2.00

SFP761 SFP/SXFP network driver card, 1 required per repeater system, fit at main £63.36

SFP762 SFP relay output card, provides reset, fault, aux & remote relay outputs £43.04

SFP763 SFP relay output card, 12 relays, as SFP762 plus 8 o/p per zone relays £66.35

SFP764 SFP relay output card, 8 relays (8 o/p per zone relays for an 8 zone SFP) £44.23

SFP765 SFP relay output card, 4 relays (4 o/p per zone relays for a 4 zone SFP) £38.98

SFP766 SFP relay output card, 2 relays (2 o/p per zone relays for a 2 zone SFP) £33.73

SF362 Barrier interface unit (allows a SFP zone circuit to be connected to up to 10

intrinsically safe detectors and call points via a Zener barrier, not supplied)

£15.38

SFP ECONOMY 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

Include all SFP standard panel features except onboard relays, system expansion connections,

coincidence, zone delay and non-latching zone facilities. SFP Economy panels are not LPCB

certified and are not compatible with SFP repeaters or SFP relay boards.

SFP702E-4 SFP Economy 2 zone panel

Keypad/keyswitch entry. (Max. 2 x 3.2Ah batteries)

£110.25

SFP704E-4 SFP Economy 4 zone panel

Keypad/keyswitch entry. (Max. 2 x 3.2Ah batteries)

£136.50

SFP708E-4 SFP Economy 8 zone panel,

Keypad/keyswitch entry. (Max. 2 x 3.2Ah batteries)

£199.50

S-KEY Spare key for use with SFP keypad/keyswitch panels £2.00

SFP ALARMSENSE 2-8 ZONE TWO WIRE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

Include 2, 4 or 8 ‘AlarmSense’ zone circuits designed for use with AlarmSense call points,

AlarmSense detectors & AlarmSense sounders only. See our separate listing on page 11

DESIGN, INSTALLATION & COMMISSIONING PRICES AVAILABLE ON REQUEST - SEE PAGES 4-5

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

6

solidstatesecurity.co.uk


SEP 3 ZONE AUTOMATIC EXTINGUISHER PANELS

• A three-zone automatic extinguisher

panel for areas housing expensive,

dangerous or irreplaceable items of

equipment

• LPCB certified to EN12094 part 1

and EN54 parts 2 & 4

• Functions as a standard three zone fire

panel with extra circuitry for controlling

the release of fire-suppressing gas into

computer rooms, chemical plants, etc.

128 x 64 pixel graphical display for

straightforward system programming

• Any combination of activated zones

can be programmed to automatically

start the panel’s release sequence

• Three conventional sounder circuits,

(two x 1st stage, one x 2nd stage)

• Wide range of monitored inputs

and auxiliary outputs (see schematic)

• Time-stamped event log

• Connections for up to eight remote

status units with their own LCDs,

manual release and mode switches

• Connections for up to eight economy

status units

• Optional relay expansion boards and

single gang abort and hold buttons

available

NEW

SEP RANGE AUTOMATIC EXTINGUISHER PANEL (TO EN12094-1)

SEP203 3 zone automatic extinguisher panel c/w 3A EN54-4 PSU

(Max. 2 x 7.0Ah batteries)

LPCB certified to EN12094-1 and EN54-2/4 (no. 176c)

£430.00

SEP212 Output expansion relay board for SEP203

Provides volt-free changeover relay contacts for reset, mode, discharged, hold and abort

£95.00

SEP210F Remote status unit, flush mounting, fully-functional

c/w Status LCD, manual release & mode (auto/manual) switches

Max. 8 x SEP210F or SEP210S per SEP203

£135.00

SEP210S Remote status unit, surface mounting, fully-functional

c/w Status LCD, manual release & mode (auto/manual) switches

Max. 8 x SEP210S or SEP210F per SEP203

£140.00

SF359/1 Weatherproof enclosure, IP66, steel, non-locking (for SEP210F/S) £110.00

SEP211 Economy status unit, single gang

c/w keyswitch operated mode (auto/manual) switch and Status LEDs

Max. 8 per SEP203

£83.00

SEP214 System line terminator, max. 2 per system (note, one is supplied with the SEP203)

For terminating the SEP203’s extinguishant release output to a gas release solenoid

£27.12

SEP215 Extinguishant hold/abort button, single gang, IP66 rated

Can be used to delay or cancel the release sequence depending on how it is connected

£65.00

SF372 ‘KAC’ yellow ‘extinguishant release’ surface call point £18.40

SF372A ‘KAC’ yellow ‘abort’ surface call point £18.40

Relay

Board

Detection

Zones

Relay Outputs

Fire

Local Fire

1st stage active

2nd stage active

Economy Status Units

(Max. 8)

An overview of the SEP203’s Inputs & Outputs

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

Fault

Provides reset, mode,

discharged, hold and

abort outputs

7

1 2 3

Mode/ESU

Extinguisher Control Panel Instructions

Conventional Fire alarm equipment

DESIGN, INSTALLATION & COMMISSIONING PRICES AVAILABLE ON REQUEST - SEE PAGES 4-5

1st stage

1st stage

2nd stage

Hold

Abort

Release

EXTINGUISHER RELEASE

PULL DOWN and PUSH BUTTONS

Input Switches

Sounder

Circuits

RS485

Gas low pressure switch

Gas flow detection switch

Activate extinguisher solenoid

Extract fan switch

EXTINGUISHER RELEASE

PULL DOWN and PUSH BUTTONS

EXTINGUISHER RELEASE

PULL DOWN and PUSH BUTTONS

Remote Status Units

(Max. 8)

Extinguishant

Gas

EXTINGUISHER RELEASE

PULL DOWN and PUSH BUTTONS

solidstatesecurity.co.uk


Conventional Fire alarm equipment

FIRE ALARM ANCILLARIES

A range of durable and cost-effective fire

alarm ancillaries, suitable for use with

virtually all makes of fire alarm panel.

REMOTE INDICATORS, RELAYS, DEVICE ISOLATORS, SOUNDER EXTENDERS, ETC.

SF318 Remote LED indicator, supplied on a single gang plate £5.68

Ideal for connecting to hidden or out of sight detectors or directly to a sounder circuit

SF376 24V 5A relay on a plate, supplied on a single gang plate £17.18

Ideal for operating door retaining magnets, rollershutter doors & other ancillary devices

SF367 Auxiliary device isolator, supplied on a single gang plate £23.74

Allows a 24V d.c. output from a fire panel to be remotely isolated, ideal for preventing

autodiallers, rollershutter doors, etc., from accidentally triggering during routine maintenance

SF366 24V 5A isolatable relay on a plate c/w buzzer, supplied on a single gang plate £35.00

Combines the functions of the SF376 5A relay and SF367 device isolator in one unit

SF502P Four zone monitored sounder extender, supplied on a double gang plate £43.63

Provides four extra sounder circuits with open and closed circuit fault monitoring,

two trigger inputs and one fault output

GENERAL PURPOSE BOXES

EN54-4 POWER SUPPLIES

• A comprehensive range of EN54-4

compliant power supplies, including:-

• Five VDS/LPCB certified boxed PSUs to

EN54-4/A2:2006 (as indicated) and a wide

range of ‘Caged’ and ‘PCB-only’ PSUs

with exactly the same electronics

• All EN54-4/A2 models offer low current

consumption, a single pole volt-free

fault relay and battery impedence

fault reporting - see listing for standby

battery requirements

NEW

NEW

NEW

NEW

SF360BOX Ancillary fire alarm equipment box (external size 380x235x90mm) £41.59

SF361BOX Ancillary fire alarm equipment box (external size 465x290x103mm) £97.75

SF362BOX Ancillary fire alarm equipment box (external size 404x404x110mm) £75.00

SF360LEDKIT 6-way Status LED kit for SF360BOX £15.25

SF361LEDKIT 6-way Status LED kit for SF361BOX or SF362BOX £15.25

EN54-4 24V & 12V POWER SUPPLIES & ANCILLARIES (TO EN54-4:1997/A2:2006)

NON-EN54-4 POWER SUPPLIES

SF360-24 24V 1.5A EN54-4/A2 Boxed PSU (380 x 235 x 96mm plastic enclosure) £150.00

VDS certified to EN54-4/A2 (no. G208156). Batteries: 2 x 12V. Min. 2Ah, Max. 3.4Ah

SF362-1 24V 1.5A EN54-4/A2 Boxed PSU (404 x 404 x 110mm metal enclosure) £170.00

VDS certified to EN54-4/A2 (no. G209196). Batteries: 2 x 12V, Min. 2.5Ah, Max.19Ah

SF362-3 24V 3A EN54-4/A2 Boxed PSU (404 x 404 x 110mm metal enclosure) £180.00

LPCB certified to EN54-4/A2 (pending). Batteries: 2 x 12V, Min. 7Ah, Max. 12Ah

SF361-3 24V 3A EN54-4/A2 Boxed PSU (465 x 290 x 103mm enclosure). £160.00

Designed to comply with EN54-4/A2. Batteries: 2 x 12V 7Ah

SF362-5 24V 5A EN54-4/A2 Boxed PSU (404 x 404 x 110mm metal enclosure) £220.00

VDS certified to EN54-4/A2 (no. G209197). Batteries: 2 x 12V, Min. 7Ah, Max. 18Ah

SF361-5 24V 5A EN54-4/A2 Boxed PSU (465 x 290 x 103mm enclosure). £200.00

Designed to comply with EN54-4/A2. Batteries: 2 x 12V 7Ah

SF360-12 12V 2A EN54-4/A2 Boxed PSU (380 x 235 x 96mm plastic enclosure) £138.08

Batteries: 1 x 12V, Min. 2Ah, Max. 7Ah (without STU plate), 3.4Ah (with STU plate)

VDS certified to EN54-4/A2 (no. G208155)

SF360SP Optional STU mounting plate for SF360-12 2A PSU £14.28

SF360-24/C 24V 1.5A EN54-4/A2 Power Supply PCB. Batteries: 2 x 12V, Min. 2Ah, Max. 12Ah £81.00

SF362-3/C 24V 3A EN54-4/A2 Power Supply PCB. Batteries: 2 x 12V, Min. 7Ah, Max 12Ah £97.62

SF362-5/C 24V 5A EN54-4/A2 Power Supply PCB. Batteries: 2 x 12V, Min. 7Ah, Max. 18Ah £127.50

SF360-12/C 12V 2A EN54-4/A2 Power Supply PCB. Batteries: 1 x 12V, Min. 2Ah, Max. 12Ah £65.00

SF360-24/E 24V 1.5A EN54-4/A2 Caged Power Supply. Batteries: 2 x 12V, Min. 2Ah, Max. 12Ah £95.00

SF362-3/E 24V 3A EN54-4/A2 Caged Power Supply. Batteries: 2 x 12V, Min. 7Ah, Max. 12Ah £114.00

SF362-5/E 24V 5A EN54-4/A2 Caged Power Supply. Batteries: 2 x 12V, Min. 7Ah, Max. 18Ah £139.00

SF360-12/E 12V 2A EN54-4/A2 Caged Power Supply. Batteries: 1 x 12V, Min 2Ah, Max. 12Ah £86.00

SF368EN 24 3A EN54-4 Boxed PSU (410 x 250 x 80mm enclosure). £175.00

Designed to comply with EN54-4. Batteries: 2 x 12V, Max. 2 x 7Ah.

NON-EN54 24V POWER SUPPLIES & ANCILLARIES

SF375P 24V 250mA unregulated door release PSU, supplied on a double gang plate £41.33

SF375PK 24V 250mA unregulated door release PSU kit £82.00

Includes one SF375P and one SF345/1H electromagnetic door retainer

SF375M 24V 1A regulated general purpose boxed PSU (271 x 200 x 70mm enclosure) £77.96

Max. 2 x 2.3 Ah batteries.

SF377 24V 2A unregulated door release boxed PSU (405 x 267 x 92mm enclosure) £66.21

SF375PE 24V 250mA unregulated double gang door release PSU c/w detector circuit £46.35

SF375PEK 24V 250mA double gang automatic door release system £186.15

Includes 1 x SF375PE double gang door release psu c/w detector circuit,

2 x Apollo optical detectors / bases; 1 x door retainer; 1 x flush back box

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

8

solidstatesecurity.co.uk


FIRE ALARM ACCESSORIES

NEW

NEW

MANUAL CALL POINTS (KAC)

SF370R ‘KAC’ red surface mounting crack glass fire call point, 470Ω £8.11

SF370RF ‘KAC’ red flush mounting crack glass fire call point, 470Ω £7.14

SF370/W ‘KAC’ red IP67 Waterproof crack glass fire call point £74.97

SF371 Spare glass for ‘KAC’ crack glass fire call points £0.69

SF370MR ‘KAC’ red No Break surface mounting fire call point, 470Ω £10.28

SF370MFR ‘KAC’ red No Break flush mounting fire call point, 470Ω £8.40

SF372 ‘KAC’ yellow ‘extinguishant release’ surface call point £18.40

SF372A ‘KAC’ yellow ‘abort’ surface call point £18.40

SF370G ‘KAC’ green ‘door release’ surface call point £18.17

SF370MC Protective cover for ‘KAC’ call point (fits all indoor KAC call point variants) £3.77

SF370KRK Test key for ‘KAC’ call point £0.55

SERIES 65 (APOLLO) CONVENTIONAL SMOKE & HEAT DETECTORS

SF302Z1H 55000-122 Series 65 AIR (57 o C) heat detector, no base £16.60

SF302Z2H 55000-127 Series 65 BR (75 o C) heat detector, no base £16.60

SF303Z1H 55000-132 Series 65 CR (90 o C) heat detector, no base £16.60

SF303Z2H 55000-137 Series 65 CS (90 o C) heat detector, no base £16.60

SF316ZH 55000-317 Series 65 optical smoke detector, no base £28.00

SF317ZH 55000-217 Series 65 ionisation smoke detector, no base £28.00

SF317ZH1 55000-220 Series 65 integrating ionisation smoke detector, no base £30.00

SF314ZOH ORB-OH-13001 Orbis multi-sensor, requires SF308ZO base £37.00

SF308Z 45681-200 Series 65 base £5.47

SF308ZD 45681-201 Series 65 base with diode £6.42

SF308ZR 45681-245 Series 65 base with relay £17.10

SF308ZO ORB-MB-00001 Orbis timesaver base £5.50

ORBIS (APOLLO) INTRINSICALLY SAFE SMOKE & HEAT DETECTORS

SF302Z1HIS ORB-HT-51145 Orbis grade 1 intrinsically safe heat detector, needs SF308ZIS base £60.00

SF302Z2HIS ORB-HT-51147 Orbis grade 2 intrinsically safe heat detector, needs SF308ZIS base £60.00

SF315ZHIS ORB-OH-53028 Orbis intrinsically safe multi-sensor, needs SF308ZIS base £78.87

SF316ZHIS ORB-OP-52027 Orbis intrinsically safe optical smoke detector, needs SF308ZIS base £68.57

SF308ZIS ORB-MB-50018 Orbis intrinsically safe timesaver base £15.00

BEAM DETECTORS

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

9

Conventional Fire alarm equipment

SF369BD Fireray 2000 12-24VDC optical beam detector, 10-100m range £512.82

SF369BD51 Fireray 5000 14-28VDC motorised beam system, 8-50m range £448.71

SF369BD1H Fireray 5000 extra detector head for use with SF369BD51 £384.60

SF369BD52 Fireray 5000 14-28VDC motorised beam system, 8-100m range £520.00

SF369BD2H Fireray 5000 extra detector head for use with SF369BD52 £489.74

SF369BD5LR Fireray 5000 long range kit £100.00

SF369BD50 Fireray 50R reflective beam detector, 50m range £414.28

SF369BD100 Fireray 100R reflective beam detector, 100m range £542.85

BELLS

SF336 24V polarised fire bell, internal £19.73

SF336C 24V polarised 6” fire bell £16.71

SF336/W 24V polarised fire bell, weatherproof £32.91

SIRENS

SF330CSR 24V red VTG fire siren c/w shallow base £17.40

SF330CSR/LPCB 24V red VTG fire siren c/w shallow base (LPCB approved) £18.57

SF330CDR 24V red VTG fire siren c/w deep base £17.40

SF330CDR/LPCB 24V red VTG fire siren c/w deep base (LPCB approved) £18.85

SF330SR 24V red polarised fire siren, internal (shallow) £22.86

SF330DR 24V red polarised fire siren, weatherproof (deep) £21.32

solidstatesecurity.co.uk


Conventional Fire alarm equipment

BEDHEAD SOUNDERS

SF331CR 24V red VRS conventional bedhead sounder £16.87

SF331CR/L 24V red VRS conventional bedhead sounder, with LED £37.50

SF331CW 24V white VRS conventional bedhead sounder £16.87

SF331CW/L 24V white VRS conventional bedhead sounder, with LED £37.50

SF331R 24V red polarised bedhead sounder £18.82

SF331W 24V white polarised bedhead sounder £18.82

BASE SOUNDERS

SF332C 24V white VCT conventional base sounder £18.28

SF332C/LIDW White lid for VCT sounder £2.77

SF332 24V Squashni base ceiling sounder £22.40

STROBES / BEACONS

SF340/1 24V polarised red 1W fire strobe £28.37

SF340/3 24V polarised red 3W fire strobe £32.05

SF340C/1 24V 1W xenon beacon, red lens £20.85

SF340C/2 24V 2W xenon beacon, red lens £21.14

SF340C/5 24V 5W xenon beacon, red lens £52.85

SF340CLS 24V red LED beacon, shallow base £19.57

SF340CLD 24V red LED beacon, deep base £19.85

SOUNDER BEACON COMBINATIONS

SF333CSR 24V red VTB fire siren/beacon c/w shallow base £41.34

SF333CDR 24V red VTB fire siren/beacon c/w deep base £41.34

SF333F 24V Flashni sounder/beacon combined £54.88

ELECTRO-MAGNETIC DOOR RETAINERS

SF345/1H ‘H’ Range 24V electromagnetic door retainer £31.00

SF345/2H ‘H’ Range 240V a.c. electromagnetic door retainer £32.35

SF345HB Floor mounting bracket for ‘H’ range door retainers £13.00

SF345C/24/500 ‘C’ Range 24V low profile door retainer, 500N, c/w keeper plate £84.14

SF345CB Floor mounting bracket for ’C’ range door retainer £7.14

SF345C/FM24/200 24V floor mounting door retainer, 200N, c/w keeper plate £63.22

SF345C/FM24/500 24V floor mounting door retainer, 500N, c/w keeper plate £89.08

VIBRATING PADS

SF363 24V vibrating pad c/w locking jack plug (requires 1 x SF364) £45.00

Designed for use under pillows, etc, to warn the hard of hearing of a fire condition

SF364 Single gang locking jack socket for use with SF363 £37.14

Can be connected to a standard 24V (max. 27V) fire alarm sounder circuit

24V BATTERY PACKS

BC283/2 24V 1.2 AH VRLA battery pack (2 x 12V including link wire) £25.72

BC284/2 24V 2.3 AH VRLA battery pack (2 x 12V including link wire) £28.82

BC285/2 24V 3.2 AH VRLA battery pack (2 x 12V including link wire) £29.45

BC286/2 24V 7.0 AH VRLA battery pack (2 x 12V including link wire) £39.54

BC288/4 24V 10.0 AH VRLA battery pack (4 x 6V including link wires) £74.11

BC290/2 24V 17.0 AH VRLA battery pack (2 x 12V including link wires) £73.82

BC289/2 24V 24.0 AHr VRLA battery pack (2 x 12V including link wire) £130.11

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

10

solidstatesecurity.co.uk


SFP ALARMSENSE 2-8 ZONE TWO-WIRE FIRE PANELS (TO EN54-2/4)

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

11

2 Wire Fire alarm equipment

SFP TWO-WIRE FIRE PANELS & ANCILLARIES

NOW WITH

KEYPAD/KEYSWITCH ENTRY

IMPROVED USER INTERFACE

TWO ONBOARD RELAYS*

• Designed to comply with EN54 parts 2 & 4

• Re-engineered to include an improved

user interface with colour-coded

buttons and combined keypad/keyswitch

entry to access level 2

• Available with 2, 4 or 8 AlarmSense zone

circuits (dependent on model purchased)

• Four conventional sounder circuits (for

use with non-AlarmSense sounders)

• Integral 1.5A EN54-4/A2 switch mode PSU

• Wide range of engineering functions

including zone test, coincidence, zone

delay and non-latching zones

• Two on-board relays (Fire and Fault)

• Two open-collector outputs (Remote

and Reset)

• ‘Class change’ and alert inputs

• Ancillary system expansion connections

for up to eight two-wire repeaters (one

SFP761 network driver card required per

system) and optional SFP relay boards

• Space for two x 12V 3.2Ah VRLA

batteries

• General and local alarm facility on

AlarmSense sounders and beacons ideal

for use in houses in multiple occupation

NEW

NEW

NEW

NEW

Zone circuits designed for use with AlarmSense call points, AlarmSense detectors & AlarmSense sounders only.

SFP702-2 SFP AlarmSense 2 zone two-wire panel, keypad/keyswitch entry £161.68

includes 2 AlarmSense zone circuits, does not extend (Max. 2 x 3.2Ah batteries)

SFP704-2 SFP AlarmSense 4 zone two-wire panel, keypad/keyswitch entry £203.87

includes 4 AlarmSense zone circuits, does not extend (Max. 2 x 3.2Ah batteries)

SFP708-2 SFP AlarmSense 8 zone two-wire panel, keypad/keyswitch entry £245.87

includes 8 AlarmSense zone circuits, does not extend (Max. 2 x 3.2Ah batteries)

SFP760 SFP 8 zone repeater panel, keypad/keyswitch entry £180.85

(Max. 2 x 3.2Ah batteries). Up to 8 per system.

S-KEY Spare key for use with SFP keypad/keyswitch panels £2.00

SFP761 SFP network driver card, one required per repeater system, fit at main £63.36

SFP762 SFP relay output card, provides reset, fault, aux & remote relay outputs £43.04

SFP763 SFP relay output per zone card, as SFP762 plus 8 output per zone relays £66.35

SFP764 SFP relay output card, 8 relays (8 o/p per zone relays for an 8 zone SFP) £44.23

SFP765 SFP relay output card, 4 relays (4 o/p per zone relays for a 4 zone SFP) £38.98

SFP766 SFP relay output card, 2 relays (2 o/p per zone relays for a 2 zone SFP) £33.73

ALARMSENSE DETECTORS, CALL POINTS & SOUNDERS for use with SFP two-wire fire panels only

SF302ASH 55000-190 AlarmSense standard heat detector £20.86

SF302ASHH 55000-193 AlarmSense high temperature heat detector £22.41

SF316ASH 55000-390 AlarmSense optical smoke detector £32.51

SF316ASHI 55000-391 AlarmSense integrating optical smoke detector £31.38

SF308AS 45681-244 AlarmSense base with ‘removAlert’ £15.68

SF330ASBS 45681-510 AlarmSense base sounder (requires cap for stand-alone use) £35.81

SF330ASLIDR 45681-295 Red cap for base sounder £3.35

SF330ASLIDW 45681-294 White cap for base sounder £3.35

SF330ASBSB 45681-509 AlarmSense base sounder/beacon £39.07

SF330ASWS 55000-018 AlarmSense open area sounder, IP65 £60.71

SF333AS 55000-017 AlarmSense open area sounder/beacon, IP65 £71.42

SF340AS 55000-035 AlarmSense open area beacon, IP65 £64.28

SF318AS 53832-070 AlarmSense remote indicator £10.61

SF310ASR 55000-835 AlarmSense relay module (needs mounting box) £37.14

SF370ASS 55100-894 AlarmSense surface mounting manual call point £32.68

SF316ASHC 55000-392 AlarmSense optical smoke detector and

sounder base combination

£65.51

SF316ASHIC 55000-393 AlarmSense integrating optical smoke detector

and sounder base combination

£66.20

SF302ASHC 55000-196 AlarmSense standard heat detector and

sounder base combination

£62.41

SF302ASHHC 55000-197 AlarmSense high temperature heat detector and

sounder base combination

£63.79

SF316ASHC1 55000-394 AlarmSense optical smoke detector and

sounder beacon base combination

£81.88

SF316ASHIC1 55000-395 AlarmSense integrating optical smoke detector and

sounder beacon base combination

£82.75

SF302ASHC1 55000-198 AlarmSense standard heat detector and

sounder beacon base combination

£78.01

SF302ASHHC1 55000-199 AlarmSense high temperature heat detector

and sounder beacon base combination

£79.73

DESIGN, INSTALLATION & COMMISSIONING PRICES AVAILABLE ON REQUEST - SEE PAGES 4-5

solidstatesecurity.co.uk


analogue addressable Fire alarm equipment

SXFP 1-2 LOOP EN54 NETWORKABLE FIRE PANELS

NOW WITH

KEYPAD/KEYSWITCH ENTRY

IMPROVED USER INTERFACE

• LPCB certified to the latest versions of

EN54 Parts 2 and 4

• Compatible with Hochiki’s ESP & Apollo’s

XP95 & Discovery protocols

• Re-engineered to include an improved

user interface with colour-coded buttons

and combined keypad/keyswitch entry

• Can be configured to sit on a network of

up to 8 interconnected SXFP main panels.

(Alternatively, up to 8 SXFP repeaters can be

connected to a non-networked panel)

• Two independently programmable

conventional sounder circuits

• Two programmable inputs, a fault

output relay and 3 programmable relays

• Zone dependency (coincidence), day/night

(building occupied/unoccupied) and

investigation delay period functions

• Individual device sensitivity settings

• Phased evacuation facility

• 500 event monitoring

• Comprehensive test, maintenance and

commissioning functions (including

auto-learn loops, monitor a point, test

outputs, OMT and loop continuity test)

• An intuitive Windows based uploaddownload

PC program

• Compatible with the Hush Button

fire alarm solution (see page 13).

• XP95/Discovery models also compatible

with C-TEC manufactured addressable

sounders & beacons (see page 15)

NEW

COMING SOON:

THE ENVISION 4-8 LOOP FIRE PANEL

PICTURE a fire panel that is

touchscreen controlled, a

breeze to install, provides clear

and constant feedback on all

aspects of fire alarm system

activity and is fully compliant

with EN54 parts 2, 4 and 13.

Picture ENVISION - a powerful,

intuitive and feature-rich range of 2 to 8 loop analogue

addressable fire panels available soon from Solid State.

Previewed to much acclaim at this year’s International

Firex exhibition, ENVISION is destined to set the fire

industry alight when it is released later this year.

SXFP 1-2 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)

SXFP501E/X SXFP Networkable single loop 16 zone panel, XP95/Discovery version £378.00

Keypad/keyswitch entry c/w 1.4A psu, plastic enclosure

LPCB certified to EN54-2/4 (no. 176b). Max. 2 x 3.2Ah batteries

SXFP501/X SXFP Networkable one loop 32 zone panel, XP95/Discovery version £552.83

Keypad/keyswitch entry c/w 3A psu, metal enclosure

LPCB certified to EN54-2/4 (no. 176b). Max. 2 x 7.0Ah batteries

SXFP502/X SXFP Networkable two loop 32 zone panel, XP95/Discovery version £694.58

Keypad/keyswitch entry, c/w 3A psu, metal enclosure

LPCB certified to EN54-2/4 (no. 176b). Max. 2 x 7.0Ah batteries

For repeaters, bezels, stainless steel enclosures, etc., see SXFP ancillaries section below

SXFP 1-2 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)

SXFP501E/H SXFP Networkable single loop 16 zone panel, Hochiki ESP version

Keypad/keyswitch entry c/w 1.4A psu, plastic enclosure

LPCB certified to EN54-2/4 (no. 176b). Max. 2 x 3.2Ah batteries

£378.00

SXFP501/H SXFP Networkable one loop 32 zone panel, Hochiki ESP version

Keypad/keyswitch entry c/w 3A psu, metal enclosure

LPCB certified to EN54-2/4 (no. 176b). Max. 2 x 7.0Ah batteries

£552.83

SXFP502/H SXFP Networkable two loop 32 zone panel, Hochiki ESP version

Keypad/keyswitch entry c/w 3A psu, metal enclosure

LPCB certified to EN54-2/4 (no. 176b). Max. 2 x 7.0Ah batteries

£694.58

For repeaters, bezels, stainless steel enclosures, etc., see SXFP ancillaries section below

SXFP ANCILLARIES (REPEATERS, NETWORK CARDS, ENCLOSURES, PRINTERS AND SOFTWARE)

SXFP510-16 SXFP Networkable repeater panel, 16 zones (all protocols)

Keypad/keyswitch entry c/w psu, plastic enclosure (Max. 2 x 3.2Ah batteries)

£275.10

SXFP510-32 SXFP Networkable repeater panel, 32 zones (all protocols)

Keypad/keyswitch entry c/w psu, metal enclosure (Max. 2 x 7.0Ah batteries)

£378.00

SFP761 SFP/SXFP network communications card for SXFP 16 zone panels

(all protocols, one required per master for network or repeater function)

£63.36

SAFP711 CFP/XFP network communications card for SXFP 32 zone panels

(all protocols, one required per master for network or repeater function)

£95.55

SAFP385 Flush mounting bezel (for SXFP 32 zone masters & repeaters) £28.99

SF359/3S Stainless steel glazed enclosure for SXFP one/two loop 32 zone panels only

Requires SF359/3CL or SF359/3SL lock kit

£280.00

SF359/3CL Cam lock kit for SF359/3S stainless steel enclosure £23.85

SF359/3SL Electromagnetic solenoid lock kit for SF359/3S stainless steel enclosure £200.00

SAFP709 SXFP printer kit, incl. lead & socket (not compatible with SXFP 16 zone panels) £395.19

SXFP507 SXFP Upload/download programming software

(Windows 2000/XP/Vista) c/w SAF7070000 lead

£84.00

SAF7070000 2m Programming lead ONLY (4 way molex to 9-way RS232 ‘D’ female) £16.28

SF232 RS232 to USB convertor (allows SAF7070000 to connect to a PC’s USB connector) £42.00

S-KEY Spare key for use with SXFP single loop 16 zone panels £2.00

DESIGN, INSTALLATION & COMMISSIONING PRICES AVAILABLE ON REQUEST - SEE PAGES 4-5

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

Here’s just a taster of some of the features you can expect:-

• Three cabinet sizes - standard (2 or 4 loops), medium (2, 4, 6 or 8

loops) and large (2, 4, 6 or 8 loops)

• An intuitive 4.3 inch, 472 x 248 pixel colour resistive touchscreen

• A real time clock with automatic daylight saving mode

• A secure fault tolerant network (via a separate driver PCB)

• 64 x eight loop peer to peer panel network capacity

• Up to 10,000 programmable and indicatable system zones

• A fully filterable 20,000 event memory

• A dedicated Ethernet connection port (requires a plug on TCP/IP PCB)

• Up to 18 Ah batteries in standard cabinet, up to 38 Ah in

larger cabinets

• Attractive flush and surface mountable ‘Compact Controllers’

(pictured) for use in reception areas/emergency service access points

• An excellent pricing structure and much, much more...

12

solidstatesecurity.co.uk


HUSH BUTTONS

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

13

analogue addressable Fire alarm equipment

HUSH BUTTON FIRE ALARM SOLUTION

• An award-winning fire alarm solution

for flats, apartments, houses of

multiple occupation and more!

• Reduces false alarms and the likelihood

of unnecessary building evacuations,

system vandalism and the possibility of a

true alarm signal being ignored

• Designed to sit on an Apollo or Hochiki

analogue addressable loop (see right)

• Each Hush Button has its own conventional

detector circuit, conventional sounder

circuit and onboard loop isolator

• Provides each HMO dwelling with a twominute

silence facility and 15-minute

isolate facility

• Fully monitored for open and short circuit

faults

• Logging facilities at the main communal

panel gives full traceability of any

problems

• Can be operated by building occupants

whilst standing at floor level

• Fully compliant with the requirements of

BS 5839 part 1 and part 6 as appropriate

NEW

NEW

SXFP508H BS5839-6 Hush Button

Hochiki ESP protocol

£73.50

SXFP508H/SS BS5839-6 Hush Button, stainless steel version (available Sept 2011)

Hochiki ESP protocol

POA

SXFP508X BS5839-6 Hush Button

Apollo XP95/Discovery protocol

£73.50

SXFP508X/SS BS5839-6 Hush Button, stainless steel version (available Sept 2011)

Apollo XP95/Discovery protocol

POA

Communal analogue

addressable fire panel

Apollo XP95 or

Hochiki ESP

Analogue loop

Hush Button

Hush Button

HUSH

HUSH

Max. 20 Hush Buttons per loop

(dependent on host panel output current and devices connected)

2 x 2 core

2 x 2 core

Conventional detectors and sounders wired in 2 x 2 core

fire resistant screened cable (2 cores per circuit).

Alternatively, 1 x 3 core cable can be used as 0V is common.

Max. cable length = 100m

Dwelling 1

EOLs

Dwelling 2

DESIGN, INSTALLATION & COMMISSIONING PRICES AVAILABLE ON REQUEST - SEE PAGES 4-5

EOLs

solidstatesecurity.co.uk


analogue addressable Fire alarm equipment

ANALOGUE ADDRESSABLE PERIPHERALS

PROTOCOL-SPECIFIC DETECTORS, CALL POINTS, SOUNDERS, BEACONS, MODULES, ETC.

NEW

NEW

NEW

NEW

APOLLO XP95 ANALOGUE ADDRESSABLE PERIPHERALS

XP95 Detectors

SF302XPH 55000-400 standard temperature (55ºC) heat detector, white, no base £42.00

SF303XPH 55000-401 high temperature (90ºC) heat detector, white, no base £42.00

SF314XPH 55000-885 multisensor, white, no base £58.33

SF316XPH 55000-600 optical smoke detector, white, no base £43.00

SF316XPHB 55000-660 black optical smoke detector, black, no base £51.40

SF317XPH 55000-500 ionisation smoke detector, white, no base £43.00

SF308XP 45681-210 standard base, white, c/w XPERT card £5.00

SF308XPB 45681-361 black standard base, black, c/w XPERT card £8.57

SF308XPR 45681-242 low power relay base, white, c/w XPERT card £27.00

SF308XPC 38531-771 blank XPERT card £0.53

SF308XPC126 45682-127 Complete set of 126 pre-addressed XPERT cards £54.00

XP95 Beam Detectors

SF369XBD 55000-265 loop powered beam detector (incl. transmitter, receiver & interface) £839.00

SF369X/1 55000-268 loop powered reflective beam detector (5-50m, 1 reflector supplied) £714.28

SF369X/2 55000-273 loop powered reflective beam detector (50-100m, 4 reflectors supplied) £771.43

XP95 Manual Call points

SF370XPI 55100-908 manual addressable call point with isolator, red £43.75

SF370XPG 39117-217 spare glass for manual addressable call point £1.14

XP95 Isolators

SF308XP/20 45681-284 isolating base (isolates up to 20 devices) £32.00

SAFP735 55000-720 isolator, needs SF308XPI base £35.00

SF308XPI 45681-211 isolator base (for use with SAFP735) £6.50

SAFP735DD 55000-802 dual isolator, DIN style £77.14

XP95 Loop Powered Sounders, Beacons and Sounder/Beacon combinations

SF330XBSI 45681-277 integrated base sounder with isolator (55-91dB) £42.86

SF330XBS 45681-278 integrated base sounder £48.57

SF330XRBI 45681-330 sounder beacon base with isolator (55-91dB) £95.71

SF330XBSCR 45681-293 locking red cap for use with sounder/bases/beacons £2.86

SF330XBSCW 45681-292 locking white cap for use with sounder/bases/beacons £2.86

SF330XAB 45681-276 ancillary base sounder £37.14

SF330XASR 55000-278 red stand alone loop powered sounder 100/92dB £74.28

SF330XASW 55000-279 white stand alone loop powered sounder 100/92dB £74.28

SF330XSR 55000-001 Sonos open area red sounder with isolator £58.57

SF330XSW 55000-002 Sonos open area white sounder with isolator £58.57

SF330XSRBR 55000-005 Sonos open area red sounder beacon with isolator £88.00

SF330XSRBC 55000-006 Sonos open area clear sounder beacon with isolator £88.00

SF333XSR 55000-009 Sonos open area red beacon with isolator £54.00

SF333XSC 55000-010 Sonos open area clear beacon with isolator £54.00

SF340X 55000-877 loop powered beacon £44.11

SF340XBI 45681-333 beacon base with isolator £45.71

XP95 Modules

SXFP508X Hush Button (XP95/Discovery), requires double gang back box £73.50

SXFP508X/SS Stainless steel Hush Button (XP95/Discovery) - available Sept. 2011 £POA

SAFP730I 55000-847 input output unit, with isolator (includes back box) £91.67

SAFP730I3 55000-588 three channel input output unit, with isolator (incl. back box) £124.85

SAFP730D 55000-803 input output unit, DIN style £95.83

SAFP730MS 55000-875 input output unit, mains switching £127.78

SAFP732I 55000-852 sounder control unit with isolator (includes back box) £111.42

SAFP732D 55000-182 sounder control unit, DIN style £114.29

SAFP732DH 55000-181 hi-power sounder control unit, DIN style £129.28

SAFP733I 55000-849 output unit with isolator (includes back box) £84.72

SAFP733D 55000-804 output unit, DIN style £88.00

SAFP734I 55000-845 zone monitor with isolator (includes back box) £90.27

SAFP734ID 55000-812 zone monitor with isolator, DIN style £88.89

SAFP736I 55000-843 switch monitor with isolator (includes back box) £79.17

SAFP736D 55000-822 switch monitor, DIN style £83.80

SAFP737I 55000-841 switch monitor plus with isolator (includes back box) £90.69

SAFP738 55000-760 mini switch monitor with interrupt & isolator (no back box required) £56.00

If the module you require is not listed, please contact our sales desk continues >>>

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

14

solidstatesecurity.co.uk


01257 463018 01257 462038 sales@solidstatesecurity.co.uk

15

analogue addressable Fire alarm equipment

APOLLO XP95 ANALOGUE ADDRESSABLE PERIPHERALS

XP95 ‘Xpander’ radio smoke and heat detection devices

SF302XPXH 11171 CS heat detector with radio base/address module £285.71

SF303XPXH 11170 A1R heat detector with radio base/address module £285.71

SF314XPXH 13032 multisensor detector with radio base/address module £328.57

SF316XPXH 12034 optical detector with radio base/address module £285.71

SF370XPX 14006 manual call point with integral radio address module £271.42

SF330XAXSR 14001 Red stand alone sounder with red radio base £371.42

SF330XAXSW 14002 White stand alone sounder with white radio base £371.42

SF333XAXR 14003 Red stand alone sounder beacon with red radio base £428.57

SF333XAXA 14004 Amber stand alone sounder beacon with white radio base £428.57

SF333XAXC 14005 Clear stand alone sounder beacon with white radio base £428.57

SAFP746 14007 Interface module with isolator, takes 15 addresses, incl aerial £571.42

SAFP746S 14008 External standard aerial £185.71

SAFP746D 14009 External directional aerial £328.57

SAFP746ST 14010 Survey tool £500.00

APOLLO DISCOVERY ANALOGUE ADDRESSABLE PERIPHERALS

SF302DH 58000-400 heat detector, no base £52.00

SF314DH 58000-700 multisensor detector, no base £71.50

SF316DH 58000-600 optical smoke detector, no base £53.00

SF317DH 58000-500 ionisation smoke detector, no base £53.00

SF313DH 58000-300 carbon monoxide fire detector, no base £71.50

SF370DP/S 58100-910 surface mounting manual call point c/w back box £53.00

SF370DP/F 58000-920 flush mounting manual call point c/w terminal tray £63.00

SF370DP/SI 58100-908 surface mounting manual call point with isolator c/w back box £62.57

SF370DPWI 58100-951 weatherproof call point with isolator, IP67 £185.71

Note all XP95 bases, isolators, interfaces, sounders and beacons are also compatible with the Discovery range.

C-TEC MANUFACTURED ADDRESSABLE SOUNDERS & BEACONS

Designed for use with C-TEC’s XFP Discovery/XP95 fire panels

• A new range of DIP switch addressable

sounders & beacons for use with

SXFP Discovery compatible fire panels

• All variants feature a built-in loop

isolator, 15 selectable tone pairs and

7 volume levels (selectable at the SXFP

fire panel)

• Low current consumption, high sound

output

• Excellent discounts for quantity orders

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

• C-TEC’s established range of loop powered

sounders and beacons

• Designed for use with SXFP XP95

compatible fire panels

• 3 dip switch selectable evacuate tones

(continuous, warble & sweep) and 1 alert tone

• Excellent lateral sound distribution

C-TEC MANUFACTURED SOUNDERS & BEACONS (FOR USE WITH C-TEC’S XFP DISCOVERY FIRE PANELS)

SF330CT Addressable Sounder Base with isolator, white (Discovery) £42.50

(Can be used as part of sounder/detector base combination - requires a separately

available smoke/heat detector & base, spur wires & fixing screws provided)

SF330CTB Addressable Sounder Beacon Base with isolator, white (Discovery) £66.50

(Can be used as part of sounder/beacon/detector base combination - requires a

separately available smoke/heat detector & base, spur wires & fixing screws provided)

SF330CTLIDW Optional white cap for SF330CT/SF330CTB (required for stand-alone use) £2.50

SF330CTLIDR Optional red cap for SF330CT/SF330CTB (required for stand-alone use) £2.50

SF330CTSR Addressable Wall Sounder with isolator, shallow base, red (Discovery) £51.50

SF330CTDR Addressable Wall Sounder with isolator, deep base, red (Discovery) £52.00

SF333CTSR Addressable Wall Sounder/Beacon with isolator, shallow base, red (Discovery) £71.00

SF333CTDR Addressable Wall Sounder/Beacon with isolator, deep base, red (Discovery) £71.50

SF340CTSR Addressable Wall Beacon with isolator, shallow base, red (Discovery) £42.50

SF340CTDR Addressable Wall Beacon with isolator, deep base, red (Discovery) £43.00

White C-TEC wall sounders and beacons also available - contact our sales desk for details.

C-TEC MANUFACTURED SOUNDERS & BEACONS (FOR USE WITH C-TEC’S XFP XP95 FIRE PANELS)

SF330CR VCT loop powered base sounder, white (XP95) £36.55

SF330CRLIDW Optional white lid for SF330CR (required for stand-alone use) £4.13

SF330CRLIDR Optional red lid for SF330CR (required for stand-alone use) £4.13

SF330CASR VTG loop powered wall sounder, shallow base, red (XP95) £48.50

SF330CASR2 VTG ‘slow whoop’ loop powered wall sounder, shallow base, red (XP95) £49.00

SF330CADR VTG loop powered wall sounder, deep base, red (XP95) £49.50

SF330CADR2 VTG ‘slow whoop’ loop powered wall sounder, deep base, red (XP95) £50.00

SF333CASR VTB loop powered wall sounder/beacon, shallow base, red (XP95) £71.30

SF333CADR VTB loop powered wall sounder/beacon, deep base, red (XP95) £72.30

SF340CASR VTG loop powered wall beacon, shallow base, red (XP95) £42.94

SF340CADR VTG loop powered wall beacon, deep base, red (XP95) £43.58

White C-TEC wall sounders and beacons also available - contact our sales desk for details.

solidstatesecurity.co.uk


analogue addressable Fire alarm equipment

NEW

HOCHIKI ESP ANALOGUE ADDRESSABLE PERIPHERALS

Hochiki ESP Detectors

SF302HEH ACB-E Fixed temperature/ROR heat sensor, no base £47.00

SF302HEWH ACB-E/W Fixed temperature/ROR heat sensor, weatherproof, no base £95.71

SF314HEH ACA-E Multi-sensor, no base £70.00

SF316HEH ALG-EN Photo-electric smoke sensor, no base £43.70

SF317HEH AIE-E Ionisation smoke sensor, no base £52.00

SF308HE YBN-R/3 Sensor base £5.00

Hochiki ESP Manual Call points

SF370H HCP-E Addressable call point, flush, red (no back box) £47.15

SF370HD HCP-DPS Addressable call point, flush, red, dual pole (no back box) £99.71

SF370HW HCP-W Addressable call point, red, weatherproof c/w back box £157.76

SF370HB SR Surface mounting back box, red £3.57

SF370HB3 SR-1T Surface mounting back box, red, 1 terminal for SF370HD £5.00

Hochiki ESP Isolators

SF308HEI YBO-R/SCI Short circuit isolator base, needs SAFP755C for stand alone use £27.14

SAFP755C S/ICAP Isolator cover for wall mounting SF308HEI £2.15

SAFP755D CHQ-SCI/DIN DIN rail mounting short circuit isolator £43.55

Hochiki ESP Loop Powered Sounders, Beacons and Sounder/Beacon combinations

SF330HE YBO-BS Loop powered base sounder (needs SF308HE base) £41.25

SF330HEB YBO-BSB Loop powered base sounder with beacon (needs SF308HE base) £73.54

SF330H CHO-WS2 Loop powered 100dB wall mounting sounder £59.86

SF330H/IB YBO-R/SCI Red isolator base for SF330H £22.71

SF330H/WK WS2-WPK Weatherproof kit for SF330H £12.14

SF330H/RB YBO-R/3 Red mounting base for SF330H £3.10

SF330H/RBI YBO-RSCI Red isolator base for SF330H £24.09

SAFP755C SI/CAP Cover for SF330HE, SF330HEB, SF308HEI sounder/isolators £2.15

SF340HE CHQ-AB Loop powered beacon, red £46.05

SF340HEA/B CHQ-AB (AMB/BLU) Loop powered beacon, amber/blue £46.05

Hochiki ESP Modules

SXFP508H Hush Button (Hochiki), requires double gang back box £73.50

SXFP508H/SS Stainless steel Hush Button (Hochiki) - available Sept. 2011 £POA

SAFP752 CHQ-DSC Dual sounder controller c/w isolator £128.57

requires 24VDC supply (needs SAFP750B)

SAFP753 CHQ-DRC Dual relay controller c/w isolator, loop powered (needs SAFP750B) £94.14

SAFP753D CHQ-R/DIN DIN rail mounting dual relay controller (J type) £99.28

SAFP753/240 CHQ-MRC Mains relay controller c/w isolator, loop powered (needs SAFP750B) £82.85

SAFP754 CHQ-Z Dual zone monitor, requires 24VDC supply (needs SAFP750LB) £136.42

SAFP754M CHQ-SZM Single zone monitor c/w isolator, loop powered (needs SAFP750B) £77.85

SAFP754DM CHQ-MZ/DIN DIN rail mounting mini zone monitor (J type) £88.42

SAFP756 CHQ-DIM Dual input monitor c/w isolator, loop powered (needs SAFP750B) £72.15

SAFP756D CHQ-S/DIN DIN rail mounting dual switch monitor (J type) £82.71

SAFP759 CHQ-Z(IS) Intrinsically safe dual monitor (needs SAFP750LB) £256.42

SAFP760 CHQ-SCI/DIN DIN rail mounting short circuit isolator (J type) £42.86

SAFP750A CHQ-ADAPTOR ESP CHQ adaptor £4.86

SAFP750B CHQ-BOX I/O box £11.42

SAFP750LB CHQ-BOX/L I/O unit large box £17.85

SAFP751 CHQ/ARI Loop powered remote indicator £47.17

Hochiki ESP Ancillary Equipment

SAFP757 O/CALG/SLR Outer cover removal tool £111.71

SAFP758 TCH-B100 Hand held address programmer £139.28

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

16

solidstatesecurity.co.uk


SS2N STATIONS, INTERFACES AND PC SOFTWARE

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

17

voiCe alarm systems

SigNET LS DISTRIBUTED VOICE ALARM SYSTEM

• Ideal for applications requiring

complex audio routing such as

airports, shopping centres and stadia

• A 240 audio zone capacity 8 channel

matrix with multiple links to

distributed fire detection systems and

optional PC controlled functions for

paging and automated messaging

• Excellent sound quality

• Digital network

• Allows PA, VA & BGM to be integrated

in one system

• Dual data rings ensure continuous

operation of system and transmission

of data even in the event of

catastrophic failure

SSS2N SigNET LS 2 node station £1,990.00

SFC1 SigNET LS single channel fibre convertor £1,150.00

S4ZIC 4 zone interface card. 8 inputs, 8 output, needs SWCTL (Max 6 per SWCTL) £150.00

SWCTL Scenario controller for input/output devices connected to an SSS2N £500.00

SSS2NRCFG SigNET LS configuration software £150.00

SigNIFY-1 SigNET LS control & fault software c/w editable spot announcer, single user £3,360.00

MICROPHONES & SigNET LS PAGING CONSOLES

S1ZDM 1 zone LS local desk paging microphone £250.00

SFM1 1 zone Firefighter's microphone with red case £450.00

SMPC16 16 button desk mount emergency paging panel, c/w fault display £900.00

SMPC16/K 16 button desk mount emergency paging panel, c/w fault display (key access) £975.00

SMPC32 32 button desk mount emergency paging panel, c/w fault display £1360.00

SMPC32/K 32 button desk mount emergency paging panel, c/w fault display (key access) £1435.00

SMPC48 48 button desk mount emergency paging panel, c/w fault display £1675.00

SMPC48/K 48 button desk mount emergency paging panel, c/w fault display (key access) £1750.00

SMPC64 64 button desk mount emergency paging panel, c/w fault display £1990.00

SMPC64/K 64 button desk mount emergency paging panel, c/w fault display (key access) £2065.00

SMPC16W 16 button wall mount emergency paging panel c/w fault display £900.00

SMPC32W 32 button wall mount emergency paging panel c/w fault display £1,360.00

SMPCRMK Rack mount kit for SMPC16W/SMPC32W £32.10

MESSAGE STORAGE

SSVMP2-8 Sound Vault dual 30 second LS message player £700.00

INTEGRITY 2-64 ZONE VOICE ALARM SYSTEM

• A fully integrated VA, PA and BGM

solution for theatres, hotels, sports

grounds, exhibition halls, shopping

centres, etc.

• Unique PC software allows the system

to be designed and demonstrated prior

to purchase, giving customers and

designers confidence and control over

the site’s voice evacuation strategies

• Simple monitored interface with fire

systems via normal sounder circuits

• Ideal for applications requiring complex

routing of multiple channels, such as

alert, evacuate, bomb and test

messages, paging and music

• Large 40 character panel displays

date/time,location and engineer

configurable fault texts

INTEGRITY MAINFRAME & CONFIGURATION SOFTWARE

SMF16 Integrity 16 zone mainframe, main CPU, 24VDC, fault display & config. software £1,500.00

SCFG Integrity configuration software £150.00

INPUT / OUTPUT MODULES

S1LS All-call Fire mic card, two message trigger, max four mics £250.00

SSVMA 30 second LS message card, c/w alert message £500.00

SSVME 30 second LS message card, c/w evac message £500.00

SSVM-CUST 30 second LS message card, c/w custom message £700.00

SCI-16 16 input, one reset, one output contact card £250.00

SBGM Stereo music input card, four externally selectable groups £250.00

SOP2 2 zone audio output card £250.00

SGPI General purpose interface card £250.00

SINTHUB Microphone interface for Integrity card £250.00

MICROPHONES & INTEGRITY PAGING CONSOLES

SFMIC Firefighter's all call mic, 2 message trigger £600.00

SFMX Fire mic. adaptor board £87.50

S1ZDM 1 Zone LS local desk paging microphone £250.00

SMPC16I 16 button desk mount emergency paging panel, c/w fault display £900.00

SMPC16I/K 16 button desk mount emergency paging panel, c/w fault display (key access) £975.00

SMPC32I 32 button desk mount emergency paging panel, c/w fault display & Integrity firmware £1360.00

SMPC32I/K 32 button desk mount emergency paging panel, c/w fault display (key access) £1435.00

SMPC48I 48 button desk mount emergency paging panel, c/w fault display £1675.00

SMPC48I/K 48 button desk mount emergency paging panel, c/w fault display (key access) £1750.00

SMPC64I 64 button desk mount emergency paging panel, c/w fault display £1990.00

SMPC64I/K 64 button desk mount emergency paging panel, c/w fault display (key accesss) £2065.00

SMPC16WI 16 button wall mount emergency paging panel, c/w fault display £900.00

SMPC32WI 32 button wall mount emergency paging panel c/w fault display £1360.00

SMPCRMK Rack mount kit for SMPC16WI/SMPC32WI £32.10

solidstatesecurity.co.uk


voiCe alarm systems

LINX SINGLE ZONE VOICE ALARM SYSTEM

• Includes many of the features of larger

VA systems, but in a compact wallmount

swing frame rack

• Pre-wired and ready for connection to

the fire alarm, loudspeakers and

batteries

• Comes with a wall mounting fire

microphone

• Three spare inputs - two for paging mics.

and one spare input for a music source

• Available in 400W multiples

• A low-cost, wall-mounting modular VA

system ideal for use in hotels, licensed

premises, schools and offices

• Conventional & analogue fire alarm

interfaces

• Includes 2 x 60W max peak class D amps

• Fully compliant with BS5839-8

• 5 and 10 zone paging microphone

consoles now available

LinX MAINFRAME & PERIPHERALS

SLINX1-400 1 Zone 400 Watt VA system £4,995.00

SLINX1-800 1 Zone 800 Watt VA system £6,495.00

SiXLS 6:1 Prioritised LS mixer £475.00

SALFI2 2 Input fire alarm interface with reset £100.00

MICROPHONES & PAGING CONSOLES

S1ZDM 1 Zone LS local desk paging microphone £250.00

SFM1 1 Zone Fireman's microphone with red case £450.00

MESSAGE STORAGE

AVAC VOICE ALARM SYSTEM

LOUDSPEAKERS

SSVMP2-8 Sound Vault dual 30 second LS message player £700.00

SSPE043 Multiple message selector £100.00

AVAC AMPLIFIERS & ANCILLARIES

SVA403 Master AVAC dual 60W amplifier, charger & PSU £1,100.75

includes fire alarm interface, fire microphone, paging and BGM connections

SVA403H Master AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp. £1,275.00

includes fire alarm interface, fire microphone, paging and BGM connections

SVA402 Slave AVAC dual 60W amplifier, charger & PSU £795.00

includes local paging and BGM connections

SVA402H Slave AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp. £930.00

includes local paging and BGM connections

SFM1 All Call Emergency microphone (1 only per system) £450.00

SFMIC All Call Emergency microphone (up to 4 only per system) £600.00

S1ZDM All Call Line level paging microphone (1 only per system) £250.00

SVA406X All Call Line level paging microphone (up to 4 only per system) £600.00

SPA105 5 Zone self-cancelling paging microphone console (non-life safety), needs SPAZU10 £500.00

SPA110 10 Zone self-cancelling paging microphone console (non-life safety), needs SPAZU10 £750.00

SPAZU10 Wall-mounted 10-zone microphone switching unit with PSU £1,100.00

for use with up to 8 SPA105 or SPA110s

LOUDSPEAKERS (TO BS5839-8)

LIFE SAFETY AMPLIFIERS

SVA421A 6” 6W ceiling loudspeaker c/w steel fire dome & ceramic terminal block £40.68

SVA422A 8W wall mounting metal cabinet loudspeaker c/w ceramic terminal block £53.57

SVA430 6W round wall/ceiling loudspeaker in metal cabinet c/w ceramic terminal block £42.00

SVA490 Ceramic terminal block and thermal fuse assembly £4.21

(use to convert wire-end sealers to BS5839-8, needs adaptable back box)

SVA492 VA loudspeaker metal termination box £22.50

c/w 2 x ceramic terminal blocks and thermal fuses

Loudspeakers for special applications - column, horn, sound projection, spherical suspension,

etc - are available to order. Please contact our technical department for details.

AMPLIFIERS

SP2200LS/B Pulse 2 x 200W LS current mode feedforward 100V amplifier, black £1,470.00

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

18

solidstatesecurity.co.uk


BGM SOURCES

GENERAL VA ANCILLARIES

CD PLAYERS, CASSETTES, TUNERS & SPOT ANNOUNCERS

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

19

voiCe alarm systems

SDNC200 5 disc CD player, 3U rack mountable £711.42

SDRW695 Twin auto reverse cassette player £504.28

SDRM595 Single play cassette player £402.14

SRMK8 Rack mount kit for SDRW695, SDRM595 £106.40

SDNU100 Digitally controlled FM/MW/LW analogue tuner, rack mountable £516.23

RELAYS, CONVERTORS, TEST EQUIPMENT, BATTERIES, ETC

RACKS & RACK ACCESSORIES

SRLP 5 Volt relay, 4 input, open collector switchable DPCO £30.00

SRLPV 12 Volt relay, 4 input, 470R switchable DPCO £30.00

SLEST 100V to line level spike protected convertor £21.25

SLEST/BBX 100V to line level convertor with full galvanic isolation £50.00

SBT5 PABX dial up interface £734.84

Loadmaster Loadmaster loudspeaker line tester £157.57S

PM-9208 Eight channel 100 Volt audio monitoring unit with loudspeaker £291.00

SSPLIT100 Life safety circuit splitter, 2 x 100 Watts £120.00

SSLIM Line impedence monitoring unit £120.00

SHS2 Hotswap module, 2 channel, requires 1 x STIJLS £200.00

STIJLS 22kHz Crystal controlled tone injector 0 to 50V £90.00

SPSIREN 28 Band Graphic Equaliser / Ambient Noise Sensor, life safety £1,200.00

SMPD Message programming dongle kit, allows compatible sound files to be sent to, £500.00

or retrieved from, an AVAC, LinX, Integrity or SigNET LS VA system using a PC

STPG5 Tone pulse generator with chime £154.60

STU16 Programmable timer unit, seven day, multiple event £337.65

SSPE121 Rack mount monitor/test loudspeaker £200.23S

SPE122 Stand alone monitor/test loudspeaker £219.76

NP7.2-12 12 Volt 7.2 Ahr SLA battery £22.72

NP27-12 12 Volt 27 Ahr SLA battery £81.21

NP42-12 12 Volt 42 Ahr SLA battery £99.93

NP70-12 12 Volt 70 Ahr SLA battery £157.57

RACKS & RACK ACCESSORIES

18UFLOOR 18U Floor rack, glazed front door, vented rear door, height 1005mm £1,237.00

27UFLOOR 27U Floor rack, glazed front door, vented rear door, height 1410mm £1,285.42

37UFLOOR 37U Floor rack, glazed front door, vented rear door, height 1870mm £1,344.94

42UFLOOR 42U Floor rack, glazed front door, vented rear door, height 2080mm £1,456.80

15USWING 15U Wall mounted swing frame rack, 600mm wide 500mm deep £1,025.57

VENT1 1U Vent £19.50

VENT2 2U Vent £26.95

VENT4 4U Vent £32.72

BATTTRAY Battery tray for 4 x 27AHR, 4 x 42 Ahr £74.00

TBOX 4 Part termination box (Fits on top of floor racks, not for data cable or fibre) H 200mm £126.00

SNCP-7 Double gang blanking plate £5.35

SNCP-1 Single gang blanking plate £4.95

2UTIL3 2U Utility rack plate, 3 double gang £30.00

2UTIL5 2U Utility rack plate, 5 single gang £35.40

SOFT6 Six circuit inrush suppression unit £300.00

Rack build prices available on request POA

DESIGN, INSTALLATION & COMMISSIONING PRICES AVAILABLE ON REQUEST - SEE PAGES 4-5

solidstatesecurity.co.uk


disabled reFuge systems

SIGTEL EMERGENCY VOICE COMMUNICATION SYSTEM

FOR DISABLED REFUGE & FIRE TELEPHONE APPLICATIONS

• Meets and exceeds the requirements

of BS 5839 part 9

• Ideal for all disabled refuge, fire telephone

and stadium marshal applications

• Compact 4 or 8 line wall-mounting master

controllers save valuable desk and floor

space in crowded control rooms

• 8 line expansion unit allows a 4 or 8 line

master controller to be expanded to

12 or 16 lines

• Network communication card allows up

to four master controllers to be

interlinked allowing systems of up to

64 lines to be easily implemented

• Optional anti-tamper enclosures

available for controllers located in areas

accessible to the public

• Wide range of ‘Disabled Refuge’ (Type B)

outstations available in green steel or

stainless steel (flush, surface or

weatherproof versions available)

• ‘Fire Telephone’ (Type A) outstations

available in locking or non-locking red steel

cabinets

• All outstations offer true duplex speech

and can be mixed and matched to suit the

application

• Unique ‘auto-learn’ facility allows fast

network set up

• Devices can be named/edited using the

buttons on a master controller or via an

optional PC programming configurator

• Fully monitored hardware and software

• System operates at 24 VDC

• In the event of mains failure, operation

can be maintained for 24 hours (standby) &

3 hours (in use) using 2 x 12V 7Ahr batteries

• Optional line tester allows cable faults to

be checked prior to equipment connection

• Can be easily interfaced to many disabled

persons toilet alarm systems, induction loop

systems, strobes, beacons or CCTV activation

relays

• Ideal for hotels, shopping malls, office blocks,

transport terminals, banks, sports stadia,

entertainment complexes, auditoria, etc.

• 16-128 line wall/desk mounting central

control equipment also available for

larger systems

NEW

NEW

SIGTEL COMPACT (1-64 LINE) SYSTEM

SIGTEL 1-64 LINE CONTROLLERS

SECU-4 4 Line Master EVC controller c/w handset & display, needs 2 x 7Ah batteries £850.00

SECU-8 8 Line Master EVC controller c/w handset & display, needs 2 x 7Ah batteries £1085.00

SECU-8NT 8 Line Master EVC controller (no handset) c/w display, needs 2 x 7Ah batteries

(typically used on networked systems that do not require multiple control points)

£910.00

SECU-8S 8 Line Slave EVC expansion unit (adds 8 extra lines to an SECU-4, SECU-8 or SECU-8NT)

Max. one SECU-8S per SECU-4/SECU-8/SECU-8NT, no batteries required

£757.00

SECU721 Network communication card (allows up to four SECU-4, SECU-8 or SECU-8NT

controllers to be interlinked - one required per networked SECU-4, SECU-8 or SECU-8NT)

£105.00

SECU423 PC programming software, configurator and mini-USB lead for SECU-4 / SECU-8

(allows the optional programming of extension names etc via a Windows PC)

£121.17

SAFP385 Grey flush bezel for SECU-4/SECU-8/SECU-8NT controllers £28.99

SF359/2 Grey steel anti-tamper enclosure for SECU-4/SECU-8/SECU-8NT controllers, surface £273.00

SF359/2B Flush mounting bezel for SF359/2 enclosure £85.83

SF359/3D Stainless steel anti-tamper enclosure for SECU-4/SECU-8/SECU-8NT controllers, flush £290.00

SF359/3CL Cam lock kit for SF359/3D stainless steel enclosure £23.85

SF359/3SL Electromagnetic solenoid lock kit for SF359/3D stainless steel enclosure £200.00

DISABLED REFUGE (TYPE B) OUTSTATIONS

SEVC302GF Green handsfree EVC outstation, flush mounting £158.40

SEVC302GS Green handsfree EVC outstation, surface mounting £168.80

SEVC302F Stainless steel handsfree EVC outstation, flush mounting £176.00

SEVC302S Stainless steel handsfree EVC outstation, surface mounting £187.55

SF359/1 Weatherproof enclosure, IP66, steel, non-locking (for SEVC302F/SEVC302GF) £110.00

FIRE TELEPHONE (TYPE A) OUTSTATIONS

SEVC301RPO Red fire telephone EVC outstation, c/w handset (push to open version) £180.00

SEVC301RLK Red fire telephone EVC outstation, c/w handset (lift lock version) £180.00

ST-BEZ301 Red flush bezel for SEVC301RPO & SEVC301RLK £14.28

SIGTEL ACCESSORIES

SFiTT EVC line tester £120.00

SCATCON Adaptor box to convert fire-rated cable to Cat 5 £26.62

SXSB Blue xenon strobe, 12V £36.00

SXSA Amber xenon strobe, 12V £36.00

SSDM Strobe driver module, 12V £15.00

BC286/2 24V Volt 7.0 Ahr SLA battery (2 x 12V including link wire) £39.54

Contact our sales desk for information on acoustic hoods

SIGTEL (16-128 LINE) SYSTEM

SIGTEL 16-128 LINE CONTROLLERS & DIAL UNITS

SCCU-16 16 line master EVC control unit with display, wall-mounting £1142.40

Needs a separate SECU desk dial unit, SLC2/SLC3 line cards and 2 x 7.0Ah batteries

SSCU-16 16 line slave EVC expansion unit (expands SCCU-16 in 16 line multiples) £714.00

Wall-mounting, needs SLC2/SLC3 line cards and 2 x 7.0Ah batteries

Max. seven SSCU-16 slaves per SCCU-16 master (allows up to 128 lines)

SLC2 2-way Line Card for Type A Fire Telephone Outstations £24.99

One card required per two Type A outstations connected to a SCCU or SSCU

SLC3 2-way Line Card for Type B Disabled Refuge Outstations £22.14

One card required per two Type B outstations connected to a SCCU or SSCU

SSVMM Two message card for SCCU (optional) £285.60

SSVMM/C Custom message card for SCCU (optional) £599.00

SAFP385 Grey flush bezel for SCCU-16 or SSCU-16 £28.99

SECU-32 32 line Desk control unit with handset and display £1,428.00

SECU-64 64 line Desk control unit with handset and display £2,142.00

SECU-128 128 line Desk control unit with handset and display £2,856.00

SECUWMB Wall Mount Bracket for SECU-32, SECU-64, SECU-128 £14.50

For outstations and accessories, please refer to the SigTEL Compact listing above

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

20

solidstatesecurity.co.uk


01257 463018 01257 462038 sales@solidstatesecurity.co.uk

21

Conventional Call systems

800 SERIES CONVENTIONAL CALL SYSTEM

• Hundreds of applications - suitable for use in hotels, leisure centres, nursing homes, shops,

offices, GP surgeries, factories, warehouses, restaurants and more

12V d.c. system - simple to install, easy to use and highly reliable - standard six core

security cable ideal for most installations

• Wide range of indicator panels covering 1 to 90 zones including a new flush or surface

mountable 20-40 Zone Call Controller (available September 2011)

• Extensive range of ancillaries including ceiling pulls, wall-mounting call points, monitoring

points, overdoor lights, infrared ceiling receivers, remote sounders, relays and more

• Attractive compact design (most wall-mounting components fit 25mm UK single or double

gang back boxes. Ceiling pulls and water resistant alert points are surface mountable)

• Two levels of call - standard (constant tone) and emergency (intermittent tone)

• No limit to system size - components can be mixed to meet the layout and call

communication requirements of virtually any building

• The range also includes our SNC951 disabled persons toilet alarm kit which contains

everything required for a BS 8300 compliant emergency assistance alarm (except cables & fixings)

NEW

NEW

NEW

NEW

NEW

DISABLED PERSONS TOILET ALARMS & ANCILLARIES

SNC951 Disabled persons toilet alarm kit (to BS8300) £107.63

Includes SNC942B call controller c/w onboard battery backup facility, SNC807C ceiling

pull, SNC806CS overdoor light c/w sounder, SNC809DBB reset point c/w sounder

& SNC949 Disabled WC sticker

SNC951/SS Stainless steel single zone call system kit £161.70

Includes SNC941/SS s/steel call controller, SNC807C plastic ceiling pull, SNC806CS/SS

s/steel overdoor light c/w sounder, SNC809DB/SS s/steel reset point & SNC949

Disabled WC sticker (no onboard battery backup)

SNCP-12 Nylon ceiling pull cord accessory pack (3m nylon cord, 2 x triangles, 1 x bullet) £3.07

SNCP-13 Wipe clean/anti-bacterial vinyl ceiling pull cord accessory pack £15.34

(3m vinyl cord, 2 x triangles, 1 x bullet)

The SNC951 can be expanded to include multi-zone indicator panels and/or additional calling devices,

sounders, overdoor lights, etc. Refer to our full 800 Series listing below for details.

800 SERIES SINGLE ZONE EMERGENCY CALL CONTROLLERS

Capable of indicating standard and emergency calls

SNC942 Single zone call controller c/w 12V 140mA PSU, reset button & relay £77.18

SNC942B Single zone call controller c/w 12V 140mA PSU, reset button, relay & £86.00

on-board rechargeable battery backup supply

SNC941 Single zone call controller c/w 12V 250mA PSU & reset button £77.18

SNC941/SS Single zone call controller, s/steel, c/w 12V 250mA PSU & reset button £138.92

SNC941B 0.3AHr battery backup kit, for use with SNC941 & SNC941/SS controllers £61.11

800 SERIES 4-12 ZONE EMERGENCY CALL CONTROLLERS

Capable of indicating standard and emergency calls

SNC944 Four zone call controller c/w mute/reset button, requires 12V PSU £60.64

SNC944/SS Four zone call controller, s/steel, c/w mute/reset button, requires 12V PSU £190.68

SNC930 12V 250mA PSU, powers up to 2 x four zone call controllers £55.13

SNC930/SS 12V 250mA PSU, s/steel, powers up to 2 x four zone call controllers £156.74

SNC941B 0.3AHr battery backup kit, for use with SNC930 and SNC930/SS 12V PSUs £61.11

SNC925B1 12V 1A white boxed PSU, powers up to 3 x four zone call controllers £69.60

AC284 2.3Ah backup battery, for use with SNC925B1 12V PSU £10.54

800 SERIES 20-40 ZONE EMERGENCY CALL CONTROLLERS - available September 2011

Capable of indicating standard and emergency calls

SNC920F 20 Zone Master Call Controller, flush version, c/w 12V 300mA PSU £POA

Includes reset button, mute/call acknowledge button and relay

(Can be extended to 40 zones using an SNC920EF expansion unit)

SNC920S 20 Zone Call Controller, surface version, c/w 12V 300mA PSU £POA

Includes reset button, mute/call acknowledge button and relay

(Can be extended to 40 zones using an SNC920ES expansion unit)

SNC920EF 20 Zone Expansion Unit for 20 Zone Call Controller, flush version £POA

Expands SNC920F Call Controller to 40 zones

SNC920ES 20 Zone Expansion Unit for 20 Zone Call Controller, surface version £POA

Expands SNC920S Call Controller to 40 zones

SBF360-12 12V 2A Boxed EN54-4 PSU, with space for 1 x 12V 7Ah standby battery £138.08

Can be optionally connected to an SNC920F/SNC920S to provide standby power

solidstatesecurity.co.uk


Conventional Call systems

NEW

800 SERIES 10-60 ZONE EMERGENCY INDICATOR PANELS

Capable of indicating standard and emergency calls

SNC812KE 10 Zone Emergency master panel c/w 12V PSU, backup battery & mute button £219.09

SNC811KE 10 Zone Emergency repeater panel £164.28

SNC822KE 20 Zone Emergency master panel c/w 12V PSU, backup battery & mute button £298.23

SNC821KE 20 Zone Emergency repeater panel £243.41

SNC832KE 30 Zone Emergency master panel c/w 12V PSU, backup battery & mute button £377.34

SNC831KE 30 Zone Emergency repeater panel £322.53

Larger Emergency master and repeater panels available to order, add per 10 zones £150.70

800 SERIES 10-60 ZONE STANDARD INDICATOR PANELS

Capable of indicating standard calls ONLY

SNC810K 10 Zone Standard master panel c/w 12V PSU & reset button £176.75

SNC811K 10 Zone Standard repeater panel £149.34

SNC820K 20 Zone Standard master panel c/w 12V PSU & reset button £248.68

SNC821K 20 Zone Standard repeater panel £221.28

SNC830K 30 Zone Standard master panel c/w 12V PSU & reset button £320.63

SNC831K 30 Zone Standard repeater panel £293.21

Larger Standard master and repeater panels available to order, add per 10 zones £137.03

800 SERIES OVERDOOR LIGHTS AND SOUNDERS

Can be used to increase call indication levels

SNC806C Overdoor light £17.12

SNC806CS Overdoor light & sounder £26.89

SNC806C/SS Overdoor light, s/steel £47.66

SNC806CS/SS Overdoor light & sounder, s/steel £54.36

SNC887D Switchable sounder £25.12

SNC888D Remote sounder £9.77

800 SERIES STANDARD CALL POINTS

Generate standard calls only

SNC807C Ceiling pull unit, no on-board reset, no remote socket £17.12

SNCP-12 Nylon ceiling pull cord accessory pack (3m nylon cord, 2 x triangles, 1 x bullet) £3.07

SNCP-13 Wipe clean/anti-bacterial vinyl ceiling pull cord accessory pack £15.34

(3m vinyl cord, 2 x triangles, 1 x bullet)

SNC802DB Standard call point, button reset, with remote socket £21.98

SNC802DBB Standard call point with braille label, button reset, with remote socket £31.37

SNC802DM Standard call point, magnetic reset, with remote socket £21.98

SNC917L Standard call push with protruding button, no on-board reset, no remote socket £19.17

SNC802DEWMMaster IP65 water resistant alert point, mag. reset, no remote socket £91.63

SNC802DEWS Slave IP65 water resistant alert point, up to 10 per master £87.32

SNC802DESS IP69K sauna alert point (must be used as a slave to an SNC802DEWM) £177.66

SNC802DEM/SS Stainless steel call point, magnetic reset, no remote socket £105.62

800 SERIES STANDARD MONITORING POINTS (door contacts included)

Generate standard calls only

SNC894DKB Isolatable monitoring point, button reset, no remote socket £31.45

SNC894DKM Isolatable monitoring point, magnetic reset, no remote socket £31.45

800 SERIES EMERGENCY CALL POINTS

Generate standard and/or emergency calls (as described)

SNC802DEB-1/2 Emergency call point, button reset, with remote socket £32.07

can generate standard and emergency calls

SNC802DEM Emergency call point, magnetic reset, with remote socket £32.07

can generate standard and emergency calls

SNC802DEWM Master water resistant alert point, IP65, mag. reset, no remote socket £91.63

can generate standard or emergency calls (not both)

SNC802DEWS Slave water resistant alert point, IP65, max. 10 per master £87.32

SNC802DESS IP69K sauna alert point (must be used as a slave to an SNC802DEWM) £177.66

SNC802DEM/SS Stainless steel call point, magnetic reset, no remote socket £105.62

can generate standard or emergency calls (not both)

SNC804DE Emergency call / reset point, button reset, no remote socket £29.30

can generate emergency calls only

SNC809DEM Emergency call / reset point, magnetic call & magnetic reset £33.47

No remote socket, can generate emergency calls only

22


NEW

NEW

NEW

800 SERIES INFRARED CALL POINTS & CEILING RECEIVERS

800 SERIES RESET POINTS

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

23

Conventional Call systems

Generate standard and/or emergency calls when triggered by a compatible infrared transmitter

SNC302RXC Infrared master ceiling receiver, no on-board reset, no remote socket £40.79

SNC302RXCS Infrared slave ceiling receiver, up to 3 per master £31.50

SNC802DERB Infrared call point, button reset, with remote socket £51.41

SNC802DERM Infrared call point, magnetic reset, with remote socket £51.41

SNC302RT Test infrared receiver £63.00

800 SERIES RECHARGEABLE INFRARED ‘STAFF ATTACK’ TRANSMITTERS

For use with infrared call points & ceiling receivers

SQT412RXA Infrared transmitter, push/pull for emergency call £84.00 ■

SQT412RXCA Infrared transmitter, push for standard call/pull for emergency call £84.00 ■

SQT424/1 Single-way charging unit for SQT412 range transmitters £15.75 ■

SQT424/10 Ten-way charging unit for SQT412 range transmitters £194.25 ■

800 SERIES INFRARED NECK / WRIST PENDANT TRANSMITTERS

Battery operated using a replaceable 12V A23/23A (8LR23) alkaline battery (supplied)

SNC432 Infrared neck pendant transmitter (push for call) £42.00

SNC432W Infrared wrist pendant transmitter (push for call) £42.00

Can be used to reset devices which do not have an onboard reset facility

SNC809DB Button reset point £9.77

SNC809DBB Button reset point c/w sounder and braille label £15.75

SNC809DB/SS Button reset point, s/steel £48.07

SNC809DM Magnetic reset point £9.77

SNC899IRR Keyswitch reset point £28.35

800 SERIES MAGNETIC RESET KEYS

For use with all magnetic call points, monitoring points and reset points

SNC803M/10 10 x magnetic reset keys £31.43

SNC803M/50 50 x magnetic reset keys £148.84

800 SERIES ANCILLARY CALLING DEVICES

Generate standard calls via a call point’s remote socket

SNC805C/6 1.8m (6ft) tail call lead £11.18

SNC805C/14 4.2m (14ft) tail call lead £12.57

SNC805D 1.2-3.6m (4-12ft) tail call lead £17.12

SNC805P Hand/foot pneumatic pad, requires 1 x SNC805AS £28.98

SNC805AS Remote air switch for SNC805P £44.55

SNC805MD Portable movement detector £383.47

SQT644 Floor pressure mat - available late 2011 £POA ■

SNC805DSP Double remote jack socket, allows two ancillary calling devices to be connected £9.95

MISCELLANEOUS 800 SERIES DEVICES

SNC889 Call latch module, can trigger a standard call from a n/o or n/c switch £11.27

SNC889ERM Multi-purpose call latch module, can trigger a standard and/or an emergency £20.31

call from a normally open switch (includes confidence LED & on-board magnetic reset)

SNC899KD Area isolator, can be used to isolate areas/zones £36.66

SNC884DE Emergency 5:1 input expander, can be used to provide area/zonal indication £21.09

SNC885 Standard 5:1 input expander, can be used to provide area/zonal indication £12.87

SNC883D 12V relay unit, can be used to switch sirens, strobes, etc. £34.22

SNC848/10 10 x anti-tamper screws £20.16

SNC848/50 50 x anti-tamper screws, can be used to secure s/steel devices in high risk environments £100.80

SNC947 Anti-tamper Allen key, for use with anti-tamper screws £9.95

SDP874B/4 Tone only UHF paging transmitter, supplied with one tone-only pager £554.13

SDP875/4 Extra tone-only pager £204.75

DESIGN, INSTALLATION & COMMISSIONING PRICES AVAILABLE ON REQUEST - SEE PAGES 4-5

solidstatesecurity.co.uk


addressable Call systems

QUANTEC ADDRESSABLE CALL SYSTEM

• A powerful yet easy-to-use addressable call system ideal for use in care homes, hospitals,

GP surgeries, mental health facilities, hotels, offices, leisure centres, shops and factories

• Ideal for nursecall, dementia, staff protection, emergency assistance and affray applications

• Up to 7 call levels - standard, ensuite, help required, emergency, attack, presence & attendance

• Staff presence, call accept, manual and automatic call divert facilities

• Up to 256 monitored addressable devices per system

• Up to 40 pre-set and 45 custom place names per system (new optional ‘User ID’

function allows staff to see exactly who is calling - available on Quantec systems with

infrared devices only)

• Flexible call routing - allows the system to be tailored to suit a site’s exact operational needs

• Includes a huge range of cost-effective system components including individually

programmable call points, displays, ceiling pulls, overdoor lights, monitoring points,

infrared transmitters and more!

• Optional Surveyor data management software allows building managers to output

reports on all aspects of call system activity to a PC’s desktop

• Contact our Sales Desk for details of our free Quantec training courses or visit our website

at www.c-tec.co.uk

QUANTEC CONTROLLERS, ENCLOSURES & INSTALLATION AIDS

SQT601-2 Quantec controller, one required per system £341.25

(Laptop programmable, includes space for 2 x 7.0Ah batteries)

SAFP385 Flush bezel for Quantec controller £28.99

SF359/3S Stainless steel glazed enclosure for Quantec controller £280.00

requires SF359/3CL or 3SL lock kit

SF359/3CL Cam lock kit for SF359/3S £23.85

SF359/3SL Electromagnetic solenoid lock kit for SF359/3S £200.00

SQT603 Quantec network splitter £21.47

QUANTEC PROGRAMMING SOFTWARE

SQT707 Quantec upload/download programming software (Windows 2000/XP/Vista/7) £84.00

Includes 4 way molex to 9-way RS232 ‘D’ female programming lead

SAF7070000 4 way molex to 9-way RS232 ‘D’ female programming lead ONLY £16.28

SF232 RS232 to USB convertor (allows SAF7070000 to connect to a PC’s USB connector) £42.00

SQT423 Quantec configurator c/w lead, adaptor & software (Windows 2000/XP/Vista/7) £121.17

(used to program special functions on addressable call points, universal

programming devices, hi-output sounders, IR/RF transmitters & IR/RF pendants)

SQT423A Configurator adaptor (allows existing QT423 configurators to program call points) £9.69

SQT707S Surveyor Data Management Software (Windows 2000/XP/Vista/7) £315.00

Includes wall socket & lead

QUANTEC DISPLAYS

SQT608C Quantec corridor display, with controls £156.45

SQT608CD Quantec corridor display, no controls £156.45

SPE0614000 Quantec stainless steel corridor display, with controls £236.63

SPE0633000 Quantec stainless steel corridor display, no controls £207.33

SQT608CD1S Quantec large corridor display (965x163x68mm) £1,060.00

requires 1 x SQT615S display interface

SQT615S Quantec display interface (for use with SQT608CD1S) £76.92

QUANTEC OVERDOOR LIGHTS & SOUNDERS

SQT606 Quantec slave overdoor light £19.37

SQT606A Quantec addressable overdoor light c/w sounder £44.10

SPE0656000 Quantec stainless steel addressable overdoor light c/w sounder, double gang £74.90

SQT688 Quantec addressable sounder £43.05

SQT688/2 Quantec high-output 85dB addressable sounder £48.46

(with optional programmable HTM08-03 tones - requires a SQT423 configurator)

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

24

solidstatesecurity.co.uk


NEW

SQT602 ADDRESSABLE CALL POINTS (WITH REMOTE SOCKETS)

QUANTEC STAINLESS STEEL CALL POINTS

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

25

addressable Call systems

SQT602 Quantec call point, button reset £38.33

SQT602S Quantec call point with sounder, button reset £43.58

SQT602R Quantec call point with IR receiver, button reset £48.83

SQT602RS Quantec call point with sounder & IR receiver, button reset £54.08

SQT602M Quantec call point, magnetic reset £38.33

SQT602SM Quantec call point with sounder, magnetic reset £43.58

SQT602RM Quantec call point with IR receiver, magnetic reset £48.83

SQT602RSM Quantec call point with sounder & IR receiver, magnetic reset £54.08

The special programming functions on the above require a SQT423 configurator

SQT602E ADDRESSABLE CALL POINTS (WITH REMOTE SOCKETS) & ICONISED LABELS

SQT602E Quantec Euro call point, button reset (iconised label) £38.33

SQT602ES Quantec Euro call point with sounder, button reset (iconised label) £43.58

SQT602ER Quantec Euro call point with IR receiver, button reset (iconised label) £48.83

SQT602ERS Quantec Euro call point with sounder & IR receiver, button reset (iconised label) £54.08

SQT602EM Quantec Euro call point, magnetic reset (iconised label) £38.33

SQT602ESM Quantec Euro call point with sounder, magnetic reset (iconised label) £43.58

SQT602ERM Quantec Euro call point with IR receiver, magnetic reset (iconised label) £48.83

SQT602ERSM Quantec Euro call point with sounder & IR receiver, mag reset (iconised label) £54.08

The special programming functions on the above require a SQT423 configurator

SQT609 ADDRESSABLE CALL POINTS (NO REMOTE SOCKETS)

SQT609 Quantec call point, button reset £37.80

SQT609S Quantec call point, button reset with sounder £43.05

SQT609R Quantec call point, button reset with infrared receiver £48.30

SQT609RS Quantec call point, button reset with sounder & infrared receiver £53.55

SQT609M Quantec call point, magnetic reset £37.80

SQT609SM Quantec call point, magnetic reset with sounder £43.05

SQT609RM Quantec call point, magnetic reset with infrared receiver £48.30

SQT609RSM Quantec call point, magnetic reset with sounder & infrared receiver £53.55

The special programming functions on the above require a SQT423 configurator

SPE0616000 Quantec stainless steel call point, button reset, no remote socket, double gang £197.40

SPE0634000 Quantec stainless steel call point, key reset, c/w remote socket, double gang £236.67

SPE0613000 Quantec stainless steel isolatable call point, key reset, no remote socket, double gang £298.91

QUANTEC SLAVE CEILING PULLS & SLAVE CALL POINTS

SQT607 Quantec slave ceiling pull unit £16.80

SNCP-12 Nylon ceiling pull cord accessory pack (3m nylon cord, 2 x triangles, 1 x bullet) £3.07

SNCP-13 Wipe clean/anti-bacterial vinyl ceiling pull cord accessory pack £15.34

(3m vinyl cord, 2 x triangles, 1 x bullet)

SQT602D Quantec slave call point £23.10

QUANTEC MONITORING POINTS

SQT604 Quantec monitoring point, button reset

Keyswitch isolatable

£38.75

SQT604M Quantec monitoring point, magnetic reset

Keyswitch isolatable

£38.75

QUANTEC UNIVERSAL DEVICES

Programming requires a SQT423 configurator

SQT611 Quantec multi-purpose programmable device £97.13

Allows 3rd-party switch assemblies & indicators to be interfaced to Quantec

SQT612 Quantec relay output device £102.38

A zone-specific relay output (30V 1A ) to trigger third-party strobes, auto-diallers, etc.

SQT613 Quantec zonal indicator driver device - can drive 3rd-party LED indicating devices £97.13

SQT614 Quantec bedhead light dimmer interface £31.50

solidstatesecurity.co.uk


addressable Call systems

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

QUANTEC INFRARED CEILING RECEIVERS

SQT302RX Quantec master infrared ceiling receiver £63.00

SQT302RXS Quantec slave infrared ceiling receiver £47.25

SQT302RXR Quantec round master infrared ceiling receiver £63.00

SQT302RXRS Quantec round slave infrared ceiling receiver £47.25

SQT848/10 10 x Anti-tamper grub screws for SQT302RXR/SQT302RXRS, incl. allen key £2.50

SQT302RT Quantec test infrared ceiling receiver £52.50

The special programming functions on the SQT302RX and SQT302RXR require a SQT423 configurator

QUANTEC Mk2 (868MHz) RADIO RECEIVERS

SQT422RX Quantec Mk2 radio receiver £222.71

SQT422RXEX External extension aerial for SQT422RX radio receiver £194.72

SQT421 RF integrity ‘monitored heartbeat’ transmitter (use at least 1 per SQT422RX) £88.83

QUANTEC ‘STAFF ATTACK’ TRANSMITTERS, INFRARED/RADIO (868MHz)

Rechargeable. For use with Quantec infrared call points, infrared ceiling receivers & Mk2 radio receivers

SQT412RXA Quantec Infrared/radio transmitter (push for attack/pull for attack) £84.00

(with optional ‘User ID’ / special programming functionality - requires a SQT423 configurator)

SQT412RXCA Quantec Infrared transmitter (push for call/pull for attack) £84.00

(with optional ‘User ID’ / special programming functionality - requires a SQT423 configurator)

SQT424/1 Single-way charging unit for SQT412 range transmitters £15.75

SQT424/10 Ten-way charging unit for QT412 range transmitters £194.25

QUANTEC NECK & WRIST PENDANTS, INFRARED/RADIO (868MHz)

Battery operated using a replaceable 12V A23/23A (8LR23) alkaline battery (supplied)

For use with Quantec infrared call points, infrared ceiling receivers & Mk2 radio receivers

SQT432 Quantec infrared/radio patient neck pendant c/w lanyard (push for call) £42.00

(with optional ‘User ID’ / special programming functionality - requires a SQT423 configurator)

SQT432W Quantec infrared/radio patient wrist pendant c/w wrist strap (push for call) £42.00

(with optional ‘User ID’ / special programming functionality - requires a SQT423 configurator)

SQT432S Spare wrist straps for SQT432W pendant, pack of 10 £15.75

SQT432A Quantec infrared/radio attendance pendant c/w lanyard (push for attendance) £52.50

(with optional ‘User ID’ / special programming functionality - requires a SQT423 configurator)

QUANTEC DEMENTIA CARE MASTER CONTROL UNIT & ANCILLARIES - available late 2011

SQT630 Quantec Dementia care master control unit c/w psu (requires SQT643 programming tools) £POA

Designed to sit on the Quantec network. Includes inputs/timers, etc., for a wide range of

dementia ancillary devices such as enuresis sensors, PIRs, bed exit mats, LED lights and more.

SQT643 Programming tools for SQT630 Dementia care master control unit (Windows compatible) £POA

SQT631K Quantec Dementia care room status controller, keyswitch reset/isolate £POA

SQT631M Quantec Dementia care room status controller, magnetic reset/isolate £POA

SQT632 Quantec doorbell push (can be optionally connected to a SQT631K/SQT631M status controller) £POA

SQT639 Quantec Dementia care super-bright 3W LED lamp MR16 £POA

QUANTEC INTERFACE UNITS - available late 2011

Allow external devices such as enuresis sensors, bed exit sensors, etc, to be connected to Quantec.

Must be used in conjunction with a SQT602/602E/609 range call point or a SQT630 dementia control unit.

SQT636 Quantec interface unit c/w remote socket £POA

(can be configured to accept normally open or closed ancillary devices)

SQT637 Quantec Enuresis/general purpose interface socket (includes two remote sockets, one £POA

for a SQT635 enuresis sensor & one that can accept a normally open or closed ancillary device)

PIR MOVEMENT SENSORS - available late 2011

Can be connected directly to a SQT630 dementia control unit or via a SQT604/QT604M

monitoring point or SQT611 multi-purpose programmable device.

SQT638 Quantec PIR movement sensor (requires a SQT645 PIR power interface if £POA

connecting to Quantec via a SQT604, SQT604M or SQT611)

SQT645 Quantec PIR power interface (for use with SQT638 PIR movement sensor) £POA ■

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

26

solidstatesecurity.co.uk


NEW

NEW

NEW

NEW

NEW

NEW

NEW

QUANTEC ANCILLARY CALLING DEVICES

QUANTEC PRINTERS & PAGING EQUIPMENT

MISCELLANEOUS

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

27

addressable Call systems

Generate calls via the remote socket on a SQT602 call point or a SQT636 / SQT637 interface unit (as indicated).

Note that SQT636 / SQT637 interface units (listed on page 26) are not available until late 2011.

SNC805C/6 1.8m/6ft tail call (connects to a SQT602 call point or a SQT636/SQT637 interface unit) £11.18

SNC805C/14 4.2m/14ft tail call (connects to a SQT602 call point or a SQT636/SQT637 interface unit) £12.57

SNC805D 1.2-3.6m/4-12ft tail call (connects to a SQT602 call point or a SQT636/SQT637 interface unit) £17.12

SNC805P Hand/foot pneumatic pad, requires 1 x SNC805AS £28.98

SNC805AS Remote air switch for NC805P (connects to a SQT602 call point or a SQT636/SQT637 interface unit) £44.55

SNC805MD Portable movement detector (connects to a SQT602 call point or a SQT636/SQT637 interface unit) £383.47

SNC805DSP Double remote jack socket, allows two ancillary calling devices to be connected £9.95

SQT644 Floor pressure mat (connects to a SQT602 call point or a SQT636/SQT637 interface unit) - available late 2011 £POA

SQT633 Bed exit mat (connects to a SQT636 or SQT637 interface unit) - available late 2011 £POA

SQT634 Chair exit mat (connects to a SQT636 or SQT637 interface unit) - available late 2011 £POA

SQT635 Enuresis (bed wet) sensor (connects to a SQT637 interface unit) - available late 2011 £POA

SQT600P Quantec printer kit incl. printer, lead & wall socket £377.22

SQT600S Quantec printer/paging wall socket £18.08

SF874QAQ Serial display paging transmitter for alphanumeric pagers, requires SF876DQ £585.00

SF876DQ Dipole 400mHz aerial c/w BNC and 10m connection lead, 1500m range £140.00

SF877QAQ 40 character alphanumeric pocket pager £180.00

SNC803M/10 Pack of 10 magnetic reset keys £31.43

SNC803M/50 Pack of 50 magnetic reset keys £148.84

SNC848/10 10 x anti-tamper screws (can be used to secure s/steel devices in secure applications) £20.16

SNC848/50 50 x anti-tamper screws (can be used to secure s/steel devices in secure applications) £100.80

SNC947 Anti-tamper Allen key, for use with anti-tamper screws £9.95

DESIGN, INSTALLATION & COMMISSIONING PRICES AVAILABLE ON REQUEST - SEE PAGES 4-5

solidstatesecurity.co.uk


induCtion loop equipment

SPDA RANGE INDUCTION LOOP EQUIPMENT

• The widest range of audio-frequency

induction loop equipment in the UK

• Designed to meet or exceed the

requirements of BS7594 and

BS-EN60118 part 4 when correctly

installed

• Available in a variety of cost-effective

kit formats suitable for use in ticket

offices, meeting rooms, lecture

theatres, nursing homes, GP surgeries,

churches and shops

• Allows hearing aid users to participate

fully in general conversation and

other social/work related activities

• No audio experience required -

can be fitted by any competent

electrician

• New SFPROK induction loop test kit

includes everything you need to test

an AFILS system to current British

standards

• Can be used to help building managers

and service providers comply with

BS8300 and the Equality / Disability

Discrimination Act

NEW

PORTABLE INDUCTION LOOP KITS (approx. 1.2m 2 coverage)

SPL1/K1 Portable induction loop kit (supplied in a cardboard carry case)

Includes SPL1 amplifier, plugtop charger and sticker.

£126.00

SPL1/K2 Portable induction loop kit with AFILS tester (supplied in a cardboard carry case) £381.32

Includes SPL1 amplifier, plugtop charger, sticker & SFPROK induction loop test kit comprising

FoSmeter-Pro test meter/loop listener, MP3 player c/w test tones and headphones.

SPL1/K3 Portable induction loop kit (supplied in a robust plastic carry case)

Includes SPL1 amplifier c/w battery & integral microphone, plugtop charger and sticker.

£178.82

SPL1/K4 Portable induction loop kit with AFILS tester (supplied in a robust plasticcarry case) £439.36

Includes SPL1 amplifier, plugtop charger, sticker & SFPROK induction loop test kit comprising

FoSmeter-Pro test meter/loop listener, MP3 player c/w test tones and headphones.

SPL1/EUROAD European Plug Adaptor for SPL1, black, 7.5A £2.28

STEAR-P Spare ‘AFILS available’ sticker £1.55

VEHICLE INDUCTION LOOP AMPLIFIER KITS (approx. 1.2m 2 coverage)

SVL1/B1 12V vehicle induction loop kit £153.12

Includes SVL1 mini-12V amplifier, AL8 cigarette lighter power connector, STX2 loop, SAMT mic.

SVL1/B2 24V vehicle induction loop kit £257.40

Includes SVL1 mini-12V amplifier, AL7 power lead, 24V to 12V DC convertor, STX2 loop, SAMT mic.

1.5m 2 COUNTER INDUCTION LOOP AMPLIFIER KITS

SML1/K SML1 counter induction loop kit £63.64

c/w SML1 wall-mounting double gang loop amplifier, SAMT mic. and STX2 counter loop

SPDA102C SPDA102 counter induction loop kit £147.77

c/w SPDA102 free-standing loop amplifier, SAMT microphone and STX121 counter loop

16m 2 INDUCTION LOOP AMPLIFIERS & KITS

Provide 16m 2 coverage to EN60118-4 or 50m 2 coverage to BS7594 (1993)

SDL50 16m 2 Domestic induction loop amplifier £89.25

SDL50/K SDL50 16m 2 Domestic induction loop amplifier kit £102.90

c/w SDL50 free-standing loop amplifier, SAMT tie/desk mic., SAPS scart lead & loop cable

SPDA102L SPDA102 16m 2 Small room loop kit (tie/desk mic version) £134.16

c/w SPDA102 free-standing loop amplifier, SAMT tie/desk microphone and loop cable

SPDA102R SPDA102 16m 2 Small room loop kit (omni-directional plated mic. version) £155.94

c/w SPDA102 free-standing loop amplifier, SAPM plated microphone and loop cable

SPDA102S SPDA102 16m 2 TV lounge loop kit £134.16

c/w SPDA102 free-standing loop amplifier, Scart lead and SAPL connection plate and loop cable

120m 2 INDUCTION LOOP AMPLIFIERS & KITS

SPDA200E SPDA200E 120m2 wall-mounting induction loop amplifier £201.23

SAKM1 SPDA200E 120m2 Meeting/seminar room loop kit

c/w SPDA200E amplifier, SAPM omni-directional mic plate

£237.11

SAKL1 SPDA200E 120m2 Lecture room loop kit

c/w SPDA200E amplifier, SAMT tie/desk mic, SAML lectern mic, 2 x SAPJ plate

£316.68

SAKT1 SPDA200E 120m2 TV / music lounge loop kit

c/w SPDA200E amplifier, SAMH handheld mic, SAPS scart lead, SAPJ plate, SAPL plate

£318.23

SAKR1 SPDA200E 120m2 Waiting room loop kit c/w SPDA200E amplifier, SAPL plate £237.11

SAKU1 SPDA200E 120m2 Retail unit loop kit

c/w SPDA200E amplifier, SAML lectern mic, SAPJ plate

£276.12

SAKW1 SPDA200E 120m2 Place of worship loop kit 1

c/w SPDA200E amplifier, SAML lectern mic, SAPJ plate, SAPL plate

£327.60

SAKW2/L SPDA200E 120m2 Place of worship loop kit 2 (lavalier mic. version)

c/w SPDA200E amplifier, SAMR/LA lavalier radio mic, SAPQM plate, 2 x SAPXM plate

£525.63

SAKW2/H SPDA200E 120m2 Place of worship loop kit 2 (handheld mic. version)

c/w SPDA200E amplifier, SAMR/HA handheld radio mic, SAPQM plate, 2 x SAPXM plate

£525.63

SAKH1/L SPDA200E 120m2 Health and fitness club loop kit (lavalier mic. version) £487.36

c/w SPDA200E amplifier, SAMR/LA lavalier radio mic, SAPQM plate, SAPL plate

SAKH1/H SPDA200E 120m2 Health and fitness club loop kit (handheld mic. version) £487.36

c/w SPDA200E amplifier, SAMR/HA handheld radio mic, SAPQM plate, SAPL plate

SAKM2 SPDA200E lift loop kit, for elevators £346.50

Please note: Loop cable is not included in the above ‘SAK’ range kits. We recommend you use 1mm2 single core cable such

as our SLOOP2/W cable which is available in 100m reels (see page 29 for pricing details).

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

28

solidstatesecurity.co.uk


PRO-RANGE (200m 2 to 900m 2 ) INDUCTION LOOP AMPLIFIERS

SPDA200/2 200m 2 free standing induction loop amplifier £303.12

SPDA500/2 500m 2 free standing induction loop amplifier £411.77

SPDA1000/2 900m 2 free standing induction loop amplifier £471.17

SPDA/RM 19” rack mount kit for SPDA Pro-Range amplifier £26.25

SPDA/WM Wall mount kit for SPDA Pro-Range amplifier £21.05

OUTREACH PLATE AUDIO INPUT EXTENSION SYSTEM

CAN BE USED TO INCREASE THE NUMBER OF AUDIO INPUTS ON AN INDUCTION LOOP SYSTEM*

* SML1, SPDA102, SPDA200E and SPDA Pro-Range amplifiers all have Outreach connection sockets. A separate 12V PSU

may be required when connecting outreach plates to other amplifiers. Plates should be wired using Belden 8723 audio cable.

SAPJ 3.5mm mono jack plate, for connection of SAMT, SAMH, SAML or SAMD microphones £38.27

SAPL Line level audio plate, for connection of SAPS SCART lead/other line level audio feeds £38.27

SAPQM 6.35mm stereo jack plate, for connection of SAMR/L & SAMR/H radio microphone kit £38.27

SAPQL 6.35mm stereo jack plate, for connection of line level feeds from mixing desks, etc £38.27

SAPXM XLR mic level plate, for connection of SAMP microphone £38.27

SAPXL XLR line level plate, for connection of line level feeds from mixing desks, etc £38.27

SAPM Omni-directional plated microphone, for wall/ceiling/desk mounting £38.27

SAPXO 3 pin XLR balanced line output plate, connects an Outreach chain to 3rd-party equipment £58.80

SAPI AFILS active indicator light £38.27

SAPS SCART to double phono lead (for use with APL plate) £6.25

MICROPHONES

SAPM Omni-directional plated microphone, for wall/ceiling/desk mounting £38.27

For direct connection to SML1, SPDA102, SPDA200E, SPDA Pro-Range or an outreach chain

SAMT Tie/desk microphone for SML1, SPDA102, SPDA200E, SPL1, SPDA Pro-Range or SAPJ plate £5.46

SAMH Handheld microphone for SML1, SPDA102, SPDA200E, SPL1, SPDA Pro-Range or SAPJ plate£39.00

SAML Lectern microphone for SML1, SPDA102, SPDA200E, SPL1, SPDA Pro-Range or SAPJ plate£39.00

SAMLS Lectern microphone (short stemmed version of SAML) £39.00

SAMD Desktop microphone for SML1, SPDA102, SPDA200E, SPL1, SPDA Pro-Range or SAPJ plate£54.60

SAMDS Desktop microphone (short stemmed version of SAMD) £54.60

SAMD/P Desktop microphone, push to talk £144.50

SAMP Professional handheld mic. for SPDA200E or SAPXM outreach plate, requires SAXLR lead £221.36

SAMR/LA Lavalier radio mic. (4 selectable frequencies)

c/w Rx, Tx, psu. for SPDA200E or SAPQM outreach plate £266.70

SAMR/HA Handheld radio mic. (4 selectable frequencies)

c/w Rx, Tx, psu. for SPDA200E or SAPQM outreach plate £266.70

SPRO45 Hanging ambient microphone for SPDA Pro-Range or SAPXM plate £198.24

INDUCTION LOOP TEST EQUIPMENT

SFPROK FosMeter-Pro Induction Loop Test Kit £320.25

Includes FosMeter-Pro Induction Loop Tester, MP3 player c/w test tones & headphones

Requires SAL1, SAL2, SAL3 (or SAL4 + SAL12 adaptor) lead

SRXTI2 Induction loop test receiver requires 2 x AAA batteries & walkman type headphones £61.73

SAL1 3.5mm jack to 3.5mm jack lead £7.88

SAL2 3.5mm jack to double phono lead £7.88

SAL3 3.5mm jack to pre-cut bare ended lead £7.88

SAL4 5.35mm jack to SXLRM lead £39.00

SAL12 3.5mm jack to 6.35mm jack socket adaptor £1.87

INDUCTION LOOP CABLE & MISCELLANEOUS OTHER AFILS ANCILLARIES

Loop cable is included in all SML1/K, SDL50/K and SPDA102 range induction loop kits. For SPDA200E/AK Range

kits we recommend SLOOP2/W cable. For other SPDA range loop amplifiers, call our technical dept. for advice.

SLOOP1/W 100m x 0.5mm 2 single core white loop cable (for black cable order SLOOP1/B) £22.75

SLOOP2/W 100m x 1.0mm 2 single core white loop cable (for black cable order SLOOP2/B) £37.17

SLOOP3/W 100m x 1.5mm 2 single core white loop cable (for black cable order SLOOP3/B) £53.08

SLOOP4/W 100m x 2.5mm 2 single core white loop cable (for black cable order SLOOP4/B) £87.96

SFLAT1005 100m x 0.5mm 2 insulated copper tape (flat loop cable for under carpets) £102.14

SFLAT2005 100m x 1.0 mm 2 insulated copper tape (flat loop cable for under carpets) £112.96

SFLAT3005 100m x 1.5mm 2 insulated copper tape (flat loop cable for under carpets) £123.90

STAPE 50m white synthetic fibre tape (used to protect flat loop cable) £9.95

BELDEN/10 10m Belden 8723 four core screened cable for use with outreach plates £18.20

SAPT Loop connector plate (for the termination of induction loop cable) £38.27

SAXLR XLR to XLR lead (used to connect SAMP mic to SAPXM outreach plate) £12.76

SLEST 100V line (i.e PA system output) to 0db (775mV line level) convertor £26.76

SAPPS Overspill reduction phase shifter £106.05

STEAR10 Pack of 10 self-adhesive ‘induction loop fitted’ stickers £9.57

29

induCtion loop equipment


dimensions

SFP/FP/MFP CONVENTIONAL FIRE PANELS

90

380mm

235mm

SFP 2-8 ZONE PANEL

Hole required for flush mounting:

W 367 x H 220 x D 75mm approx

(No bezel required)

90

133

85mm

90

465mm

380mm

380mm

510mm

FP8/10/12/14 PANEL

Hole required for flush mounting

using FF387 bezel:

W 512 x H 340 x D 110mm approx

SEP EXTINGUISHER PANELS & ANCILLARIES

290mm

SEP203 PANEL

Hole required for flush mounting:

W 440 x H 277 x D 40mm approx

235mm

235mm

336mm

53

85

110

271mm

160mm

SXFP ADDRESSABLE FIRE PANELS

SXFP 1 LOOP 16Z PANEL

Hole required for flush mounting:

W 367 x H 220 x D 75mm approx

(No bezel required)

POWER SUPPLIES

SF360-12/24 PSU

Hole required for flush mounting:

W 367 x H 220 x D 75mm approx

(No bezel required)

75

435mm

404mm

240mm

404mm

270mm

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

200mm

EFP1 PANEL

Designed for surface mounting only

94

408mm

SEP210S RSU

Designed for surface

mounting only

SXFP 1/2 LOOP 32Z PANEL

Hole required for flush mounting

using AFP385 bezel:

W 412 x H 255 x D 50 approx

SF362-1/3/5 PSU

Designed for surface

mounting only

267mm

MFP4/8/12/MFP REPEATER PANEL

Hole required for flush mounting

using FF385 bezel:

W 410 x H 271 x D 70mm approx

30

94

53

103

85mm

175mm

325mm

250mm

725mm

465mm

267mm

FP2/4E PANEL

Hole required for flush mounting

using FF379 bezel:

W 327 x H 271 x D 70mm approx

133

510mm

MFP16/20/24/28 PANEL

Hole required for flush mounting

using FF387 bezel:

W 512 x H 340 x D 110mm approx

SEP210F RSU

Hole required for flush mounting:

W 156 x H 232 x D 51mm approx

(No bezel required)

448mm

SF359/3S STAINLESS STEEL ENCLOSURE

Depth of hole required for flush mounting: 93mm

290mm

SF361-3/5 PSU

Hole required for flush mounting:

W 440 x H 277 x D 40mm approx

336mm

372

186

20

94

408mm

267mm

FP4/6/8E/FP REPEATER PANEL

Hole required for flush mounting

using FF385 bezel:

W 410 x H 271 x D 70mm approx

15

326

652

522

solidstatesecurity.co.uk

15

15

20

20

49.5


SigTEL DISABLED REFUGE

85

53

160mm

435mm

240mm

270mm

SECU-8 CONTROLLER

Hole required for flush mounting

using AFP385 bezel:

W 412 x H 255 x D 50 approx

SEVC302S OUTSTATION

Designed for surface mounting only

QUANTEC CALL SYSTEM

85

435mm

270mm

SQT601-2 CONTROLLER

Hole required for flush mounting

using AFP385 bezel:

W 412 x H 255 x D 50 approx

800 SERIES CALL SYSTEM

115

15

450mm

141mm

86mm

SNC942B 1 ZONE CONTROLLER

Designed to mount on a UK double gang

back box of at least 25mm depth

450mm

226

53

103

AVAC VOICE ALARM SYSTEM

AVAC MASTER/SLAVE

Hole required for semi flush mounting:

W 420 x H 420 x D 45mm approx

175mm

600mm

250mm

462mm

SF359/2 ENCLOSURE

Hole required for flush mounting

using BF359/2B bezel:

W 610 x 470 x 185mm approx

SEVC302F OUTSTATION

Hole required for flush mounting:

W 156 x H 232 x D 51mm approx

(No bezel required)

725mm

448mm

01257 463018 01257 462038 sales@solidstatesecurity.co.uk

31

193

123

SF359/3S STAINLESS STEEL ENCLOSURE

Depth of hole required for flush mounting: 93mm

15

141mm

86mm

SNC944 4 ZONE CONTROLLER

Designed to mount on a UK double gang

back box of at least 25mm depth

372

92

200mm

725mm

302mm

397mm

180mm

448mm

SF359/3D STAINLESS STEEL ENCLOSURE

Depth of hole required for flush mounting: 183mm

SF359/1 ENCLOSURE

Designed for surface mounting only

186

20

15

326

652

522

10-30Z INDICATOR PANEL

Designed for surface mounting only

15

15

20

20

372

49.5

186

20

92

15

326

dimensions

397mm

652

522

360mm

40-60Z INDICATOR PANEL

Designed for surface mounting only

solidstatesecurity.co.uk

15

15

20

20

49.5


www.solidstatesecurity.co.uk

Solid Solid State State Security Security Limited, Limited, Hartfield Hartfield House, House, 54 Chorley Chorley Road, Road, Hilldale, Hilldale, Parbold, Parbold, Wigan, Wigan, Lancashire Lancashire WN8 WN8 7AS. 7AS.

01257 463018 01257 462038 info@solidstatesecurity.co.uk www.solidstatesecurity.co.uk

B FE

FIR/G/10006 SP203 APPROVED

More magazines by this user
Similar magazines