speakers - Fane

More documents

Recommendations

Info

speakers1989 and failed in that effort,and Fane was sold toWharfedale. I left in December1989, and it was to be thebeginning of the end for Fanesoon after.I then had a conversation withthe founder of Eminence, BobGault, and created Eminence asa branded product for the firsttime. Before that, Eminencewas the world’s number oneBob Gault & Hartley Peavey OEM manufacturer, but withouta brand presence or distribution line of its own. Consequently,it was the loudspeaker industry’s best-kept secret. So I createda product line for my catalogue, supported it with professionalmarketing, which was an exciting development at that time,and established international distribution in all markets outsideNorth America. The international renown of the Eminencebrand today is evidence of the success of this decision.Wharfedale sold Fane to another company, it was sold in turnagain, and in February 2007 I was able to buy the business. Ihad also acquired another company called Precision Devices,which makes very high-end PA speakers, so we already had asmall manufacturing facility when we acquired Fane. TheFane factory was located in Leeds, and when we built a newfacility, we were able to bring over all the old tooling andmachinery, and amazingly, many of the original workers. Oneof the smartest moves I made was to find one of my old supervisorsfrom Fane, Susan Goodyear, who had begun workingthere in 1978 and whom we hired to run production again.Now, Arthur Faulcus was avery clever fellow, and he hadinvented the glass fiber voicecoil in 1967, which was used inthe guitar speakers – copperwire wound on a glass fiberformer, which allowed us todouble the power ratings. Priorto that time, when guitar playerswould play the amplifiers into clipping, the voice coilswould heat up and quickly fail. The glass fiber former morethan doubled the power handling, and it is the same former weuse today. We also have a lady working with us who was acoil winder with Fane in 1972, and she is a coil winder for ustoday. In the early days, children would follow their mothersand fathers to work in the business, which was quite common.TQR:To what extent do you feel that the materials usedto manufacture speaker components have changedsignificantly from the old days?Well, as you know, Alnico was exclusively used until itbecame so expensive in the mid ‘60s, and I’d be lying if Isaid it wasn’t challenging to acquire the same high-qualitymaterials today. Fane began using Alnico again in the AxiomSeries in the early ‘90s, and we have examples of the olderoriginal speakers to compare to. We have retained the samemanufacturing techniques, the same voice coil, and we buythe cones from the same supplier we used in the ‘60s – theBritish manufacturer Kurt Mueller.TQR:Is there an accepted variance in speaker manufacturingspecifications?I would say that a variance of plus or minus 5% in the resonanceof the speaker is a fact of life, but each speaker is testedagainst the master specifications and the response curvemust be within our tolerances.TQR:What do you see as the future for Fane?The relaunch of Fane is still in the very early stages and wehave a huge number of exciting developments to the productline to unveil over the coming months. We will see a mixtureof our popular favorites standing alongside a raft of newproduct releases which will strengthen and broaden the Faneline to an unparalleled extent, giving Fane clients the opportunityto use our drivers in every application in a way notavailable to them before. For information on Fane speakers inthe USA, please reference Tonic Consulting, Inc. in RedwoodCity, CA., www.tonicamps.com, and the Fane web site.FANE REVIEWWe received a pair of Fane Axiom Alnico 12s and 10s forreview – weighty 34 ounce, 100 watt steel blue Alnicos. Bothspeakers essentially share the same voice – interesting andunique, with stout compression and a very touch-sensitivedynamic character. The Fanes avoid sounding aggressive andgritty in the upper mids, retaining a strong midrange focuswithout sacrificing treble presence and sustain. Bass responseis also strong, and the Fanes are exceptionally powerful andpunchy. Their overall sound is full, bold and very British,definitely voiced with strong mids, but not at the expense ofclarity. We’re probably just dreaming here, but they remind usa lot of a Hiwatt amp. Mounted as a single or in a 2x12 openback Avatar cabinet, the Fane created a fascinating blend oftones capturing both the full fidelity of a classic Fender ampwith the richly focused and lush harmonic detail of a Voxwhen played through our Deluxe and vintage Tremolux amps.Since the frames of the Axiom speakers are tapped with onlyfour mounting holes, we were unable to mount the 10 in theblackface Princeton, which still retains its original eightmounting screws. Keep this in mind when considering Britishspeakers destined for older combos. We recommend the-continued-8TONEQUEST REPORT V10. N2. December 2008
speakersFanes for single 10 and 12 configurations (check the numberof screws on your baffleboard and insure that the deep Alnicobell cover will fit), or any extension speaker configuration.Fane also offers ceramic models, and additional speakersunder development.www.fane-international.comTHE EVM12-L CLASSICJoe Bonamassa reminded us ofthe venerable EVM12-L Classicas we were discussing his everchangingrig in the October ‘08issue of TQR. We contacted EV,and they graciously sent us aquad of these magnificent speakersto consider on your behalf.We also recalled a story told byStevie Ray Vaughan’s formerguitar tech, René Martinez,about Stevie switching over toEVs after they had become fedup with speakers blowing on the road. René and César Diazspent days replacing the baffleboards in Stevie’s Fender ampsand fitting them with heavy duty EVs. One of those EV15swas present in Stevie’s stolen Vibroverb featured in theAugust ‘07 issue of TQR. Aside from the problem that blownspeakers obviously posed on tour, Stevie was intently focusedon achieving a loud and exceptionally clean tone on stage.The ElectroVoice speakers were perfectly suited to handle thepercussive soundpressure created byStevie’s .013-.060strings, multipleamps, Fuzz Face,and his brutalstring-popping‘touch.’ We askedJosh Bartunek,Product Managerfor Bosch Communications Systems to provide some historicalbackground on the EV speakers, and we received the followingdescription from an ElectroVoice engineer:“The Electro-Voice EVM12 was originally released to productionin 1973. The EVM12L Series II was released in1978. There is no written history of development – only thefinal documentation and various people’s memories. A varietyof engineers worked on various aspects of the design, so itwould be unfair to single out any specific individuals asresponsible for the EVM12L sound.In the beginning, it was decided that the EVM12L wouldshare the magnet structures and frames of the entire EVMproduct line, much ofwhich would be usedfor sound reinforcementloudspeakers.Sound reinforcementloudspeakers musthave high efficiencyand high power handlingto be able toprovide sufficientlyhigh sound pressurelevels in large venues. To meet these requirements, largemagnet structures were designed to create powerful electromagneticmotors for high efficiency. Heavy-duty die-cast aluminumframes were designed to support the large magnetstructures and to ensure that the frames wouldn’t flex duringhigh-power operation. An additional benefit of the large magnetstructures and heavy-duty aluminum frames is that theyact as heat sinks to draw heat away from the voice coil,enabling higher power handling to be achieved. While thesefeatures are essential for sound reinforcement loudspeakers,they are not commonly found in most guitar speakers.Although these design decisions were not originally madespecifically for the EVM12L, they did have an effect on thesonic characteristics and resulted in exceptional reliability.The voice coil, cone, dust dome and spider were, however,specifically chosen for the EVM12L. Although there is norecorded history of the sonic target of the EVM12L, theintent was to make the speaker sound “musical.” The voicecoil was designed to get the ”right amount of distortion”when driven hard. The geometry of the paper cone and thedust dome and the details of the paper pulp were chosen toget “the right sound,” as was the choice for the cloth for thesurround and the treatments applied. Nobody realized at thetime the impact that the EVM12L would have on the futureof guitar sound.For most of its life, the EVM12L speaker was manufacturedat the Electro-Voice facility in Newport, TN. That manufacturingfacility was relocated to Morrilton, AR in 2002 – andthat is where all Electro-Voice loudspeakers are manufacturedtoday. There have been a variety of changes to the EVM12Lover the years – some intentional and some unintentional.The intentional changes are the obvious cosmetic changes.The frames and magnet structures were redesigned to have amore rounded and sleek look to give the speaker a more modernappearance. These redesign revisions were made tochange the appearance without affect on the performance. Inaddition, a plethora of labels have appeared on the EVM12Lover the years.The unintentional changes to the EVM12L were the result ofchanges in manufacturing processes and materials that-continued-TONEQUEST REPORT V10. N2. December 20089
Page 1: speakersGreen Beret 12This is a ver

speakers - Fane

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?