10.07.2015 Views

Installation and Operation Manual For Hunter Ceiling ... - Hunter Fan

Installation and Operation Manual For Hunter Ceiling ... - Hunter Fan

Installation and Operation Manual For Hunter Ceiling ... - Hunter Fan

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

®PROBLEM PROBABLE CAUSE SOLUTIONNoisy operation (continued).4. Using non-approved speed control. 4. Change to approved speed control.5. Glass screwed loosely to fixture. 5. H<strong>and</strong>-tighten the light fixturescrews. Ensure that rubber noiseisolators are installed.6. Switch housing is loose.6. Check <strong>and</strong> tighten screws to theswitch housing mounting plate <strong>and</strong>to the upper <strong>and</strong> lower switchhousing.Excessive wobbling.Note: When switching from mediumto low speed, you may notice some fanwobble. When the fan stabilizes at lowspeed, wobble will disappear.1. Unbalanced blades.2. Loose blades or blade irons.3. <strong>Fan</strong> not secure on hanger assembly.4. <strong>Fan</strong> hanger ball not seated incanopy tabs.1. Use balancing kit included with fan.2. Tighten all screws.3. Turn power off, support fan verycarefully, loosen canopy <strong>and</strong> hangcorrectly.4. Turn power off, support the fanvery carefully, <strong>and</strong> check that thehanger ball is properly seated.If you have tried these troubleshooting solutions <strong>and</strong> still have trouble, call 901-248-2222 or visit ourWeb site at http://www.hunterfan.com.continued41524-01 9-5-200131

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!