Conveyor system closures Universal · RGT - Stöbich Brandschutz
Conveyor system closures Universal · RGT - Stöbich Brandschutz
Conveyor system closures Universal · RGT - Stöbich Brandschutz
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>RGT</strong> type<br />
System advantages<br />
R 0 type - interrupted<br />
conveying <strong>system</strong>s<br />
• Open construction, thus good access for maintenance<br />
• Limited closing power and controlled closing velocity<br />
• In case of horizontal closing direction the shutter lowering in the closing area is<br />
possible in the closing position, thus minimum split for smoke penetration<br />
• Suitable for all conveyor <strong>system</strong>s, e.g. chain conveyors<br />
Design<br />
• Special galvanized particular-steel profiles for frames and closure envelopings<br />
• Shutter elements as sandwich-construction with full-cored mineral<br />
and calcium silicate plates Promatect H<br />
• Shutters alternatively planked with galvanized steel or stainless<br />
steel, respectively colour-coated<br />
• Re-opening is done manually, by electric motor or pneumatically<br />
Closure types for the conveyor technique<br />
R 2 type - continuous<br />
bearing bars, embraced<br />
roll<br />
G 5 type - brought<br />
together belts, continuous<br />
supporting construction<br />
underneath the closing level<br />
R 3 type - continuous<br />
bearing bars and driving<br />
elements, external roll<br />
Application<br />
parameters<br />
and vice versa<br />
≥ 100 LH = ≥<br />
200 - 2700 340<br />
5000<br />
≥ LB + 400 LB =<br />
200 - 2500<br />
6000<br />
≥ 220<br />
K 3 type - continuous slide<br />
steel sheets and cross<br />
beams, recirculation<br />
through sleeve<br />
K 2 type - continuous<br />
chain conveyors or<br />
travelling carriage<br />
and vice versa<br />
for the RO type<br />
K 5 type - continuous slide<br />
steel sheets/guiding<br />
plates - lower belt through<br />
sleeve<br />
KS type - hinge chain for<br />
steel and synthetic plates<br />
≥ LH =<br />
200 - 2700<br />
5000<br />
≥ 100<br />
≥ 400 LB = 200 - 2500 ≥ 240<br />
6000<br />
≥ LH + 400<br />
Page 2<br />
Brickwork<br />
according to DIN 1053-1,<br />
wall thickness<br />
d ≥ 175 mm<br />
Concrete<br />
according to DIN 1045,<br />
wall thickness<br />
d ≥ 140 mm<br />
G 11 type- tray belt,<br />
continuous carrying bars,<br />
recirculation through sleeve<br />
S type - container<br />
conveyor <strong>system</strong>, fixed rails<br />
Dimensions: Red = technical feasibility,<br />
White = according to the approval You will find the approval at www.stoebich.de<br />
Wall qualities
Change language