configuration and options guide - IBM Quicklinks

ibmquicklinks.com

configuration and options guide - IBM Quicklinks

Major updates in this issueAdded xSeries 206 and 306 models supporting 3.2GHz/800MHz Xeonprocessors with Intel's EM64T technologyAdded xSeries 236 and 346 redundant power models with Remote SupervisorAdapter II SlimLine installedAdded additional system support for FAStT100 Storage ServerAdded additional system support for FAStT EXP100 Expansion UnitAdded support for new IXA adapter in xSeries 346Added UPS options for Intellistation Z Pro (6223)Added monitor support for xSeries 226Added portable USB drive support for x336Added additional tape and tape enclosure supportAdded adapter support for the BladeCenter PCI I/O Expansion UnitVarious maintenance updates


Table of ContentsInformation Sources . . . . . . . . . . . . . . . . . 3Server Product Positioning. . . . . . . . . . . . 5xSeries Selection Guide . . . . . . . . . . . . 7IntelliStation® Video Adapter SelectionGuide. . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 IntelliStation M Pro 6220 . . . . . . . . . . . . 132 IntelliStation M Pro 6230 . . . . . . . . . . . . 173 IntelliStation Z Pro 6221 . . . . . . . . . . . . 254 Intellistation Z Pro 6223. . . . . . . . . . . . . 315 IntelliStation A Pro 6224 . . . . . . . . . . . . 396 xSeries 206 . . . . . . . . . . . . . . . . . . . . . . . 477 xSeries 225 . . . . . . . . . . . . . . . . . . . . . . . 558 xSeries 226 . . . . . . . . . . . . . . . . . . . . . . . 659 xSeries 235 . . . . . . . . . . . . . . . . . . . . . . . 7510 xSeries 236 . . . . . . . . . . . . . . . . . . . . . . 8511 xSeries 255 . . . . . . . . . . . . . . . . . . . . . . 9512 xSeries 306 . . . . . . . . . . . . . . . . . . . . . 10513 xSeries 335 . . . . . . . . . . . . . . . . . . . . . 11314 xSeries 336 . . . . . . . . . . . . . . . . . . . . . 12115 xSeries 343 (NEBS-compliant) . . . . . 13116 xSeries 345 . . . . . . . . . . . . . . . . . . . . . 13517 xSeries 346 . . . . . . . . . . . . . . . . . . . . . 14518 xSeries 365 . . . . . . . . . . . . . . . . . . . . . 15319 xSeries 382 . . . . . . . . . . . . . . . . . . . . . 16320 xSeries 445. . . . . . . . . . . . . . . . . . . . . 16921 xSeries 455. . . . . . . . . . . . . . . . . . . . . 18322 RXE-100 Remote Expansion Enclosure19123 Datacenter Solution Program . . . . . . 19324 eServer 325 . . . . . . . . . . . . . . . . . . . . 21725 BladeCenter and BladeCenter TChassis. . . . . . . . . . . . . . . . . . . . . . . . . . 22326 BladeCenter HS20 . . . . . . . . . . . . . 23127 BladeCenter HS40 . . . . . . . . . . . . . 23528 BladeCenter JS20 . . . . . . . . . . . . . 23929 VMware ESX Server 2.0. . . . . . . . . . . 24130 xSeries Network Operating SystemPreloads . . . . . . . . . . . . . . . . . . . . . . . . . 24331 IBM and Third Party SoftwareApplications . . . . . . . . . . . . . . . . . . . . . . 24532 External Storage Expansion UnitOverview. . . . . . . . . . . . . . . . . . . . . . . . . 24933 EXP400 (17331RU) . . . . . . . . . . . . . . . 25134 Fibre Channel Solutions Quickview. 25335 FAStT100 Storage Server . . . . . . . . . 25736 FAStT200 Storage Server (3542xRU) 25937 FAStT EXP500 (35601RU) . . . . . . . . . 26338 FAStT600 Storage Server . . . . . . . . . 26739 FAStT EXP700 (17401RU) . . . . . . . . . 27140 Fibre Interconnection Guidelines. . . 2751


Information SourcesInformation SourcesAudience Where to go How to getIBM xSeries Configuration and Options GuideCustomers www.pc.ibm.com/us/eserver/xseries Select www.pc.ibm.com/us/compatSelect Business Partners www.pc.ibm.com/partner/us/ User ID and password required.IBM EmployeesPC Marketing Essentials (US) on Lotus NotesdatabaseD03DB035\p_dir\pcpartnr\marketng\me4feus.nsfserverproven.raleigh.ibm.com/cog/index.shtmlMain menu --> Configuration and Options Guideinternal siteFeedback cfgtools@us.ibm.com E-mailIBM xSeries and Netfinity Rack ConfiguratorCustomers www.pc.ibm.com/us/eserver/xseries Select Business Partners www.pc.ibm.com/partner/us/ User ID and password required.IBM EmployeesMain menu --> ConfiguratorsFeedback cfgtools@us.ibm.com E-mailIBM xSeries Configuration AidCustomers, BusinessPartners, IBM Employeeswww.pc.ibm.com/qtechinfo/MIGR-41411.html -www.pc.ibm.com/us/eserver/xseries/library/configtools.html-Feedback cfgtools@us.ibm.com E-mailPC Sales Guide/Configurator and WorkPad Pricer (updated twice per week)Business PartnersIBM Employeespsg.partner.boulder.ibm.com/partner/fpages.nsf/HTML/United+States.PSGC/$FILE/pcconfig.htmlPC Marketing Essentials (US) on Lotus NotesdatabaseD03DB035\p_dir\pcpartnr\marketng\me4feus.nsfw3-1.ibm.com/psg/essentials/us/me4feus.nsf/$$FrameSet?ReadFormUser ID and password required.Select Configurators.Feedback BMSHD08@us.ibm.com E-mailLatest Product & Technical InformationCustomerswww.pc.ibm.com/us/eserver/xseriesor call 1-800-772-2227-Business Partners www.pc.ibm.com/partner/us/ or call 1-800-426-7763Select Products & Services (user ID and password required).IBM EmployeesPC Marketing Essentials (US) on Lotus NotesdatabaseD03DB035\p_dir\pcpartnr\marketng\me4feus.nsfFrom main menu or by brand category.3


Additional URLsAudience Where to go How to getTechnical spec sheets(PSREF)IBM Datacenter SolutionsClustering (US, LA, CAN)Benchmark ResultsOptions/NOS/ServerCompatibilitywww.pc.ibm.com/us/eserver/xseries/library.htmlwww.pc.ibm.com/ww/eserver/xseries/windows/datacenter.htmlwww.pc.ibm.com/ww/eserver/xseries/clustering/index.htmlwww.pc.ibm.com/ww/eserver/xseries/benchmarks/www.pc.ibm.com/us/compatSelect Technical spec sheets (PSREF).-Select appropriate category or server.Select appropriate category or server.Select appropriate Product Type.Active PCI www.pc.ibm.com/us/compat Select , .99.9% AvailabilityGuarantee Programwww.pc.ibm.com/ww/eserver/xseries/999guarantee.htmlSelect appropriate category.IBM Storage Products www.storage.ibm.com Select appropriate category.Adv Sys Mgmt AdapterFirmwarewww.pc.ibm.com/ww/eserver/xseriesSelect Servers, select Intel-based Servers, select Fixes, select Get Fixes, selectappropriate category.Flash BIOS Updates www.pc.ibm.com/ww/eserver/xseries Select Servers, select Intel-based Servers, select Fixes, select Get Fixes, selectdevice drivers by server, select appropriate category.ServeRAID Updates www.pc.ibm.com/ww/eserver/xseries Select Servers, select Intel-based Servers, select Fixes, select Get Fixes, selectappropriate category.VMwarewww.pc.ibm.com/ww/eserver/xseries/vmware.html-Options ContinuationProgramwww.pc.ibm.com/ww/ocp -4 Configuration and Options Guide


Server Product PositioningIncreased Capacity:SMPStorageI/OAvailability FeaturesWorkloadx445HS40x365x455x382x346HS20 x345e325 x336x335x236x235x255x306 x226x305 x225x206x205InfrastructureApplicationNumber of ClientsWhen in a competitive situation, this table suggests the appropriate IBM xSeries server to bid against othervendors’ equipment. However, as an IBM business partner, you may determine that customer-specificrequirements may make an alternative IBM solution a better choice.ValueUniversal/TowerDepartmental/MissionCriticalUniversal/TowerRack-optimizedModular EnterpriseScalable NodesIA-64 IBM: eServer 325, xSeries 382Dell: PowerEdge 7150HP: ProLiant rx5670IA-32>4-wayIBM: xSeries 455Dell: PowerEdge 3250HP: Proliant rx2600IBM: xSeries 445 (Xeon MP)HP: ProLiant DL740, DL760 G2Unisys: ES70004-way IBM: xSeries 255Dell: PowerEdge 6600HP:ProLiant ML570IBM: xSeries 365Dell: PowerEdge 6650HP: ProLiant ML560 & 580 G2IBM: xSeries 445 (Xeon)Dell: PowerEdge 6650HP: ProLiant DL580G2IBM: eServer BladeCenter HS402-way IBM: xSeries 225Dell: PowerEdge 1600SCHP: ProLiant ML350G3IBM: xSeries 235Dell: PowerEdge 2500HP:ProLiant ML370IBM: xSeries 335, xSeries 345Dell: PowerEdge 1750, 2650HP: ProLiant DL360G3, DL380IBM: eServer BladeCenter HS20Uni IBM: xSeries 206Dell: PowerEdge 700HP: ProLiant ML110IBM: xSeries 306Dell: PowerEdge 750HP: ProLiant DL320IBM: xSeries 205Dell: PowerEdge 500SCHP: ProLiant tc2100IBM: xSeries 305Dell: PowerEdge 350HP: ProLiant DL3205


6 Configuration and Options Guide


xSeries Selection GuideThis table provides a reasonable approximation of selecting the appropriate server based on the number ofusers supported in a particular application environment. Customer environments are unique and areunlikely to be precisely represented by this table. External Storage Units are utilized when internalcapacities are exceeded. Steps for using this table are provided after the table footnotes. These are notpublished benchmark results. See “Benchmark Results” on the ‘Information Sources’ page for a URL toview published benchmark results.Performance numbers are based on Windows 2003 Advanced Server. Other Network Operating System(NOS) results could vary.Extensive SAP sizings are available from IBM/SAP Competency Centers. Contact your IBM MarketingRepresentative for additional information.Using the Selection GuideStep 1: Select the desired server operating environment (or one that most closely matches).Step 2: Select number of users equal or greater than planned maximum number of users.Step 3: Move up to the top row of the columns chosen in step 2, to determine which servers should beconsidered as possible solutions.Step 4: Evaluate other features of those servers in order to determine which server is the mostappropriate.Application/Expectation of Maximum # ofUsersxSeries2053.06GHz/533MHz-512KBPentium 4xSeries2063.0GHz/800MHz-1MBL2 CachePentium 4xSeries 3053.06GHz/533MHz-512KBPentium 4xSeries3063.0GHz/800MHz-1MB L2CachePentium 4xSeries 225Dual3.06GHz/533MHz-512KBXeonxSeries335 Dual3.2GHz/533MHz-2MB L3XeonxSeries345 Dual3.2GHz/533MHz-2MBL3 XeonDB TransactionProcessingSelect, Update andDelete; Does notinclude image orDecision Support# Users 3650 5140 6150 7200 11070 13550 13550# Processors 1 1 1 1 2 2 2Memory 2GB 2GB 4GB 4GB 8GB 8GB 8GB# Hard Disk Drives 20 to 35 25 to 30 30 to 50 40 to 50 50 to 70 70 to 90 70 to 90# RAID Adapters >1 or Fibre >1 or Fibre > 1 or Fibre > 1 or Fibre >2 or Fibre Fibre >2 or Fibre# NetworkConnections1 1 1Gb 1Gb 1Gb 1Gb 1GbFile and PrintApplication is storedlocally. (For serverstored applications -cut number of users inhalf).# Users 2500 2880 3500 4030 6050 6500 6500# Processors 1 1 1 1 2 2 2Memory 2GB 2GB 3GB 3GB 4GB 4GB 4GB# Hard Disk Drives 20 to 25 20-30 30 to 40 35 to 45 50 to 65 55 to 70 55 to 70# RAID Adapters 1 to 2 1 to 2 1 to 2 >=1 to Fibre >4 >2 or Fibre >2 or Fibre# 100Mbps EthernetConnections1Gb 1Gb 1Gb 1Gb 1 to 2 Gb 2 x 1Gb 2 x 1GbLotus® Notes®10% Power Users 40%Mail50% Mail & DB# Users 1760 2020 2750 3670 4810 5870 5870# Processors 1 1 1 1 2 2 2Memory 2GB 2GB 2GB 3GB 3GB 3GB 3GB# Hard Disk Drives 10 to 20 15 to 20 20 to 25 25 to 30 30 to 40 35 to 50 35 to 50# RAID Adapters 1 to 2 1 to 2 1 to 2 > 1 or Fibre > 1 or Fibre > 1 or Fibre > 1 or Fibre# NetworkConnections>2 >2 1Gb 1Gb 1Gb 1Gb 1Gb7


Microsoft® ExchangeServer 2000100% Med Users30MB Mailbox# Users 1750 - 1750 - 3250 3250 3250# Processors 1 - 1 - 2 2 2Memory 1GB - 1GB - 2GB 2GB 2GB# Hard Disk Drives 12 - 12 - 22 22 22# RAID Adapters 1 - 1 - 1 1 1# NetworkConnections1 - 1 - 1 1 to 2 1 to 2SAP 3-Tier DistributedVersion 4.0bProcessingSales and DistributionApplication (Minimumof 16-20 Servers)# Users - - - - - - -# Processors - - - - - - -Memory - - - - - - -# Hard Disk Drives - - - - - - -# RAID Adapters - - - - - - -# NetworkConnections- - - - - - -SAP Central Version4.0bProcessingSales and DistributionApplication(One Server)# Users 170 - 170 - 180 180 180# Processors 2 - 2 - 2 2 2Memory 2GB - 2GB - 2GB 2GB 2GB# Hard Disk Drives 12 to 24 - 12 to 24 - 12 to 24 12 to 24 12 to 24# RAID Adapters >1 - >1 - >1 >1 >1# NetworkConnections1 - 1 - 1 1 1Application/Expectation of Maximum # ofUsersxSeries 235Dual3.2GHz/533MHz-1MB L3XeonxSeries 255Quad3.0GHZ/400MHz-4MB L3Xeon MPxSeries 365Quad3.0GHZ/400MHz-4MB L3Cache XeonMPxSeries 382 xSeries 445Dual Four-way1.5GHz/ 3.0GHz/400MHz- 400MHz-6MB L3 4MB L3Itanium 2 1 Xeon MPxSeries 445Eight-way3.0GHz/400MHz-4MB L3Xeon MPDB TransactionProcessingSelect, Update andDelete; Does notinclude image orDecision Support# Users 13810 22190 27280 13280 27280 41600# Processors 2 4 4 2 4 8Memory 12GB 12GB 32GB 16GB 32GB 64GB# Hard Disk Drives 70 to 90 110 to 130 130 to 160 60 to 80 130 to 170 210 to 250# RAID Adapters >2 or Fibre >5 or Fibre >4 or Fibre >2 or Fibre >4 or Fibre >4 or Fibre# NetworkConnections1Gb 1Gb 1Gb 1Gb 1Gb 1GbFile and PrintApplication is storedlocally. (For serverstored applications - cutnumber of users inhalf).# Users 6130 8780 9210 6750 9210 N/A# Processors 2 4 4 2 4 -Memory 4GB 4GB 4GB 4GB 4GB -# Hard Disk Drives 50 to 70 75 to 100 75 to 100 55 to 75 75 to 100 -# RAID Adapters >2 or Fibre >4 or Fibre >4 or Fibre >2 or Fibre >4 or Fibre -# 100Mbps EthernetConnections2 x 1Gb 2 x 1Gb 2 x 1Gb 2 x 1Gb 2 x 1Gb -8 Configuration and Options Guide


Refer to the Important Notices section for important noticesLotus® Notes®10% Power Users 40%Mail50% Mail & DB# Users 5530 6900 7250 - 7250 N/A# Processors 2 4 4 - 4 -Memory 3GB 4GB 4GB - 4GB -# Hard Disk Drives 35 to 45 45 to 60 45 to 60 - 45 to 60 -# RAID Adapters >1 or Fibre >2 or Fibre >2 or Fibre - >2 or Fibre -# NetworkConnections1Gb 1Gb 1Gb - 1 -Microsoft® ExchangeServer 2000100% Med Users30MB Mailbox# Users 3250 6000 - - - -# Processors 2 4 - - - -Memory 2GB 4GB - - - -# Hard Disk Drives 22 34 - - - -# RAID Adapters 1 1 - - - -# NetworkConnections1 to 2 2 - - - -SAP 3-Tier DistributedVersion 4.0bProcessingSales and DistributionApplication (Minimumof 16-20 Servers)SAP Central Version4.0bProcessingSales and DistributionApplication(One Server)# Users - 4800 - - - -# Processors - 4 - - - -Memory - >4GB - - - -# Hard Disk Drives - 48 to 60 - - - -# RAID Adapters - >3 - - - -# NetworkConnections- 1 - - - -# Users 180 375 - - - -# Processors 2 4 - - - -Memory 2GB >2GB - - - -# Hard Disk Drives 12 to 24 24 to 36 - - - -# RAID Adapters >1 >2 - - - -# NetworkConnections1 1 - - - -1. Performance numbers for the xSeries 382 are based on using 64-bit software applications.Application/Expectation ofMaximum # of UsersxSeries 44516-way3.0GHz/400MHz-4MB L3Xeon MPxSeries 455Quad1.5GHz/400MHz-6MB L3CacheItanium 2BladeCenter(chassis)BladeCenterHS20 Dual3.2GHz/533MHz-1MB L3XeonBladeCenterHS40eServer325 DualAMDOpteronModel246-1MBL2 Cache 1DBTransactionProcessingSelect,Update andDelete; Doesnot includeimage orDecisionSupport# Users 57330 31370 180700 12900 19360 15190# Processors 8 4 (BladeCenter 2 4 2Memory 64GB 56GB numbers are 8GB 12GB 12GB# Hard DiskDrives290 to 340 150 to 190 derived by 60 to 80 100 to 120 75 to 90# RAID Adapters >4 or Fibre >4 or Fibre multiplying by Fibre Fibre Fibre# NetworkConnections1Gb 1Gb 14 HS20s) 1Gb 1Gb 1GbxSeries Selection Guide 9


IntelliStation® Video Adapter Selection GuideVideo Adapter 1ImagingDual-head GraphicsMemorySignal WidthResolution Supported(each head)Monitor Connector TypeNumber/Type Monitors SupportedSystem Support 23DlabsWildcat4 7110 3,4extreme 3D Y 128/128MB128/64-bit2048 x 1536 (analog),3820 x 2160 (digital) 52 DVI-I 2 digital, hybrid oranalog (anycombination)Z Pro 6221NVIDIA QuadroFX 3400 PCleHigh Advanced 3D Y 256MB 256-bit 2048 x 1536 (analog), 2 DVI-I 2 digital, hybrid or3820 x 2400 (digital) 5 analog (anycombination)Z Pro 6223NVIDIA QuadroNVS 280 PClePerformance 2D Y 64MB 64-bit 2048 x 1536 (analog),1280 x 1024 (digital)2 DVI-D or 2 analog(both requirepigtails convert theDMS59)2 digital/hybrid or 2analog/hybridZ Pro 6223NVIDIA QuadroFX 3000NVIDIA QuadroFX 1300 PCleNVIDIA QuadroFX 1100NVIDIA QuadroFX 1000NVIDIA Quadro4980XGLextreme 3D Y 256MB 128-bit 2048 x 1536 (analog), 2 DVI-I 2 digital, hybrid or3820 x 2400 (digital) 5 analog (anycombination)Advanced 3D Y 128MB 128-bit 2048 x 1536 (analog), 2 DVI-I 2 digital, hybrid or3820 x 2400 (digital) 5 analog (anycombination)Advanced 3D Y 128MB 128-bit 2048 x 1536 (analog), 2 DVI-I 2 digital, hybrid or3820 x 2400 (digital) 5 analog (anycombination)extreme 3D Y 128MB 128-bit 2048 x 1536 (analog), 2 DVI-I 2 digital, hybrid or3820 x 2400 (digital) 5 analog (anycombination)advanced 3D Y 128MB 128-bit 2048 x 1536 (analog), 2 DVI-I 2 digital, hybrid or3840 x 2400 (digital) 5 analog (anycombination)A Pro 6224,M Pro 6230,Z Pro 6221Z Pro 6223A Pro 6224,M Pro 6230,Z Pro 6221M Pro 6230,Z Pro 6221M Pro 6230,Z Pro 6221NVIDIA Quadro4580XGLentry 3D Y 64MB 128-bit 2048 x 1536 (analog),1600 x 1200 (digital)analog (both requirepigtails to convertthe LFH60)2 digital/hybrid or 2analog/hybridM Pro 6220,M Pro 6230NVIDIA Quadro4280NVShigh-performance2DY 64MB 128-bit 2048 x 1536 (analog),1280 x 1024 (digital)analog (both requirepigtails to convertthe LFH60)2 digital/hybrid or 2analog/hybridA Pro 6224,M Pro 6220,M Pro 6230,Z Pro 6221MatroxMillennium G450DVIentry 2D Y 32MB 64-bit 2048 x 1536 (analog),1280 x 1024 (digital)1 DVI-I 1 digital/hybrid or 2analog/hybrid(requires pigtailshipped withadapter)Z Pro 62211. Available only as standard equipment in an IntelliStation workstation model or configured to order via CTO.2. See IntelliStation system At-A-Glance sections to identify models that include these standard video adapters.3. Requires more space than the planar provides between slots, preventing the installation of an optional PCI adapter in the first PCI slot.4. Models shipped with this video adapter do not support video playback in DVD devices.5. The IBM T221 monitor (P/N 9503DG3) is required to run this mode. Smaller resolutions are available on the digital port with other monitors.11


12 Configuration and Options Guide


Chapter 1. IntelliStation M Pro 6220IntelliStation M Pro 6220 At-A-GlancePart Number 1Processor/FSB Speed (HGz/MHz)Number of Processors (Std/Max)CacheMemory (Std/Max) 2Video Adapter (AGP)Form FactorOnboard Ethernet 3Storage Controller 4Internal HDD Storage (Std/Max)Optical DriveBays (Total/Avail)PCI Slots (Total/Avail)6220-20U 2.8/800 1/1 512KBL2256MB/4GB 5NVIDIA Quadro4280NVSLow-profileDesktop1Gb IDE 40GB/240GB 648x-20xCD-ROM3/1 3/36220-24U 2.8/800 1/1 512KBL2512MB/4GB 5NVIDIA Quadro4580XGLLow-profileDesktop1Gb SATA 80GB/320GB 748x-20xCD-ROM3/1 3/36220-40U 3.2/800 1/1 512KBL2256MB/4GB 5NVIDIA Quadro4280NVSLow-profileDesktop1Gb IDE 40GB/240GB 6 48x-20xCD-ROM3/1 3/36220-44U 3.2/800 1/1 512KBL2512MB/4GB 5NVIDIA Quadro4580XGLLow-profileDesktop1Gb SATA 80GB/320GB7 48x-20xCD-ROM3/1 3/36220-50U 3.4/800 1/1 512KBL2512MB/4GB 5NVIDIA Quadro4280NVSLow-profileDesktop1Gb IDE 40GB/240GB 6 48x-20xCD-ROM3/1 3/36220-54U 3.4/800 1/1 512KBL2512MB/4GB 8NVIDIA Quadro4580XGLLow-profileDesktop1Gb SATA 80GB/320GB 7 48x-20xCD-ROM3/1 3/36220-71U 93.4/800 1/1 1MBL2512MB/4GB 8NVIDIA Quadro4280NVSLow-profileDesktop1Gb SATA 80GB/320GB7 48x-20xCD-ROM3/1 3/36220-74U 3.4/800 1/1 1MBL2512MB/4GB 8NVIDIA Quadro4580XGLLow-profileDesktop1Gb SATA 80GB/320GB7 48x-20xCD-ROM3/1 3/31. IntelliStation M Pro 6220 also provides six USB ports (two in front, four in rear), two 9-pin serial ports and one 25-pin parallel port. A floppydiskette drive is not provided. All models ship with a keyboard, mouse and a vertical floor stand. See "Power and Accessories" for a list of compatiblemonitors.2. Maximum memory capacity may require replacement of the standard DIMMs.3. An Intel-based copper gigabit Ethernet controller is integrated into the planar.4. IDE models support two IDE HDDs and one IDE optical drive. SATA models support two SATA HDDs and one IDE optical drive.5. Standard memory is PC2700 CL2.5 ECC DDR.6. Maximum storage is based on two 120GB IDE HDDs, which requires replacing the standard 40GB HDD.7. Maximum storage is based on two 160GB SATA HDDs which requires replacing the standard 80GB HDD.8. Standard memory is PC3200 CL3 ECC DDR.9. Ships preloaded with Red Hat Enterprise Linux® WS 3 operating system. Other models ship preloaded with Microsoft Windows XP Professional.IntelliStation M Pro 6220 Memory OptionsSBBNumberOptionNumberMemory Description 1, 274P5096 06P4053 256MB PC2700 ECC DDR UDIMM74P5097 06P4054 512MB PC2700 DDR UDIMM74P5098 06P4055 1GB PC2700 ECC DDR UDIMM74P5112 06P4049 256MB PC3200 ECC DDR UDIMM74P5113 06P4050 512MB PC3200 ECC DDR UDIMM74P5114 06P4051 1GB PC3200 ECC DDR UDIMM13


1. A single DIMM configuration is valid if installed in socket DIMM1. Otherwise,DIMMs must be configured in matched pairs starting with DIMM sockets 1 and 3,then 2 and 4. Single DIMM models require the standard DIMM either be matchedor removed, before adding additional memory in pairs.2. All DIMM speeds within a configuration must match. All PC3200 or all PC2700.IntelliStation M Pro 6220 Hard Disk Drive (HDD) and Optical StorageOptionsSBBNumberOptionNumberDescription Bays Supported Height MaximumQuantitySATA HDDs 1, 274P5102 09N4253 80GB 7200rpm Serial ATA 1, 3 SL 290P0581 09N4254 160GB 7200rpm Serial ATA 1, 3 SL 2IDE HDDs 1, 374P5145 22P7157 40GB 7200 rpm ATA-100 (EIDE) HDD 1, 3 SL 249P2895 09N4226 80GB 7200 rpm ATA-100 (EIDE) HDD 1, 3 SL 202R2677 09N4231 120GB 7200 rpm ATA-100 (EIDE) HDD 1, 3 SL 2Optical Drives 471P8149 10K3782 48x-20x CD-ROM Black Internal IDE Drive 2 HH 190P4239 22P7042 48x/32x/48x Max CD-RW Drive 2 HH 102R3278 22P6950 16x Max RAM-Read DVD-ROM Drive 2 HH 126K8793 73P3305 Multi-Burner Plus 2 HH 11. Standard HDD installed in bay three for both SATA and IDE models.2. SATA models support a maximum of two SATA devices and one IDE device.3. EIDE models support a maximum of three IDE devices including CD-ROM drives and HDDs.4. Standard optical drive is installed in Bay 1.14 Configuration and Options Guide


Refer to the Important Notices section for important noticesBay Form Factor Height FrontAccessUsage 11 89mm (3.5in) SL No HDD2 133mm (5.25in) HH Yes Std. Optical3 89mm (3.5in) SL No Std. HDD1. A diskette drive does not ship with any model.M Pro 6220 front viewIntelliStation M Pro 6220 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCISupport 1SlotsSupported 2Storage Controllers- 71P8648 ServeRAID-7t SATA Controller Half 64-bit 1 ... 3Networking 3, 431P9605 31P9601 PRO/1000 MT Server Ethernet Adapter by Intel Half 64-bit 1 ... 3- 73P2701 PRO/1000 MT Dual Port Server Ethernet Adapter byIntelHalf 64-bit 1 ... 332P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit 1 ... 331P6305 31P6301 NetXtreme 1000 T Ethernet Adapter Half 64-bit 1 ... 332P9298 31P6401 NetXtreme Dual Port Gb Ethernet Adapter Half 64-bit 1 ... 3Other I/O31P7205 31P7201 V.90 Data/Fax Soft Modem Half 32-bit 1 ... 31. A 64-bit adapter installed into a 32-bit slot transfers data at 32-bit rates. Adapters rated at 66MHz or higher will operate at 33MHz wheninstalled in a 33MHz slot.2. IntelliStation M Pro 6220 has three half-length PCI expansion slots on a single 32-bit, 33MHz bus.3. Wake on LAN® is supported through PCI networking adapters that provide this function.4. The integrated 10/100/1000 Intel-based Ethernet controller supports Wake on LAN.M Pro 6220 rear viewChapter 1. IntelliStation M Pro 6220 15


IntelliStation M Pro 6220 Power and AccessoriesSBBNumberOptionNumberDescriptionPowerIntelliStation M Pro 6220 includes a 200w voltage-sensing power supply and a single line cord.Tower Uninterruptible Power Supply (UPS)- 21301TX UPS750TLV- 21302TX UPS750THV- 21303TX UPS1000TLV- 21304TX UPS1000THV- 21305TX UPS1500TLV- 21306TX UPS1500THVMonitors- 673766N C170 ThinkVision 17in CRT Flat Panel Monitor (406.4mm, 16in viewable image), business black- 9503DG3 T221 Flat Panel Monitor 22.2in (564mm, 22.2in viewable image), business black- 6636HB1 L150p ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image), business black- 6734HB0 L170p ThinkVision 17in LCD Flat Panel Monitor (432mm, 17in viewable image), business black- 2704HB7 L190p ThinkVision 19in TFT Flat Panel Monitor (483mm, 19in viewable image), business blackKeyboard and Mouse 102R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys business black02R3421 28L3673 Sleek 2-Button Mouse, business black02R3434 31P8700 Optical 3-button Scrollpoint Pro Mouse - 800dpi - PS/2 and USB- 33L3252 SpaceBall 3D Input DeviceOther Accessories- 22P9024 64MB USB 2.0 Memory Key- 22P9025 256MB USB 2.0 Memory Key- 05K9276 USB Portable Diskette Drive1. IntelliStation M Pro 6220 ships standard with a keyboard and mouse.16 Configuration and Options Guide


Chapter 2. IntelliStation M Pro 6230IntelliStation M Pro 6230 At-A-GlancePart Number 1, 2Processors/FSB Speed (GHz/MHZ)Number of Processors (Std/Max)CacheMemory (Std/Max) 3Video Adapter (AGP)Form FactorOnboard Ethernet (Mbps) 4Storage Controller 5IEEE 1394Internal HDD Storage (Std/Max) 6Optical Drive (IDE)Bays (Total/Avail)PCI Slots (Total/Avail)6230-20U 2.8/800 1/1 512KBL2256MB/4GB 7NVIDIA Quadro4280NVSTower 1Gb IDE N 40GB/360GB 8 48x-20xCD-ROM7/4 5/56230-25U 2.8/800 1/1 512KBL2512MB/4GB 7NVIDIA Quadro4580XGLTower 1Gb U320 N 36.4GB/587.2GB9 48x-20xCD-ROM7/4 5/56230-27U 2.8/800 1/1 512KBL2512MB/4GB 7NVIDIA Quadro4980XGLTower 1Gb IDE Y 40GB/360GB 8 48x/24x/48x CD-RW7/4 5/56230-38U 3.0/800 1/1 512KBL2512MB/4GB 7NVIDIA Quadro4980XGLTower 1Gb U320 Y 36.4GB/587.2GB 9 48x/24x/48x CD-RW7/4 5/56230-39U 3.0/800 1/1 512KBL21GB/4GB 7NVIDIA QuadroFX 3000Tower 1Gb U320 Y 36.4GB/587.2GB 9 48x/24x/48x CD-RW 7/310 5/4 116230-41U 3.2/800 1/1 512KBL2512MB/4GB 7NVIDIA Quadro4280NVSTower 1Gb SATA Y 1280GB/320GB 48x-20xCD-ROM7/4 5/56230-49U 3.2/800 1/1 512KBL21GB/4GB 7NVIDIA QuadroFX 3000Tower 1Gb U320 Y 36.4GB/587.26GB 9 48x/24x/48x CD-RW 7/310 5/4 116230-51U 3.4/800 1/1 512KBL2512MB/4GB 13NVIDIA Quadro4280NVSTower 1Gb SATA Y 1280GB/320GB 48x/24x/48x CD-RW7/4 5/56230-52U 3.4/800 1/1 512KBL2512MB/4GB 13NVIDIA QuadroFX 500Tower 1Gb SATA N 1280GB/320GB 48x/24x/48x CD-RW7/4 5/56230-55U14 3.4/800 1/1 512KBL21GB/4GB 13NVIDIA QuadroFX 1100Tower 1Gb U320 Y 36.4GB/587.26GB 9 48x/24x/48x CD-RW7/4 5/56230-56U 3.4/800 1/1 512KBL21GB/4GB 13NVIDIA QuadroFX 1100Tower 1Gb U320 Y 36.4GB/587.26GB9 48x/24x/48x CD-RW7/4 5/56230-58U 3.4/800 1/1 512KBL21GB/4GB 13NVIDIA Quadro4980XGLTower 1Gb U320 Y 36.4GB/587.26GB9 48x/24x/48x CD-RW7/4 5/56230-59U 3.4/800 1/1 512KBL21GB/4GB 13NVIDIA QuadroFX 3000Tower 1Gb U320 Y 36.4GB/587.26GB 9 48x/24x/48x CD-RW 7/310 5/5 116230-61U 3.2/800 1/1 1MBL2512MB/4GB 13NVIDIA Quadro4280NVSTower 1Gb SATA N 1280GB/320GB 48x/24x/48x CD-RW7/4 5/56230-65U 3.2/800 1/1 1MBL21GB/4GB 13NVIDIA QuadroFX 1100Tower 1Gb SATA N 160GB/320GB12 48x/24x/48x CD-RW7/4 5/56230-72U 3.4/800 1/1 1MBL2512MB/4GB 13NVIDIA QuadroFX 500Tower 1Gb SATA N 80GB/320GB12 48x/24x/48x CD-RW7/4 5/5156230-75U 3.4/800 1/1 1MBL21GB/4GB 13NVIDIA QuadroFX 1100Tower 1Gb U320 Y 36.4GB/587.26GB9 48x/24x/48x CD-RW7/4 5/56230-78U 3.4/800 1/1 1MBL21GB/4GB 15NVIDIA Quadro4980XGLTower 1Gb U320 Y 36.4GB/587.26GB8 48x/24x/48x CD-RW7/4 5/51. IntelliStation M Pro 6230 also provides six USB ports (two in front, four in rear), two 9-pin serial ports and one 25-pin parallel port. Select models havetwo IEEE 1394 ports (one front, one rear). All models ship with a keyboard and mouse. See "Power and Accessories" for a list of compatible monitors.All models are rack-mountable using an optional tower-to-rack conversion kit, or they can be turned on the side and installed as desktop units capableof supporting the weight of a monitor.2. Unless otherwise footnoted, models ship preloaded with Microsoft Windows XP Professional.3. Maximum memory capacity may require replacement of the standard DIMMs.4. An Intel-based copper gigabit Ethernet controller is integrated into the planar.17


5. Describes the storage controller to which the standard HDD is attached. All models include two Serial ATA (SATA) controllers supporting one deviceeach. All models also include an integrated ATA-100 IDE controller. Four IDE devices are supported in IDE models and three IDE devices in the SCSImodels. SCSI models include an integrated single-channel Ultra320 SCSI controller that supports up to four nonhot-swap SCSI HDDs attached with astandard four-drop terminated LVD SCSI cable.6. Maximum storage capacity assumes all drives are of the same type. Higher maximum capacities may be possible by mixing SATA HDDs with IDEHDDs or by mixing SATA HDDs with SCSI HDDs.7. Standard memory is PC2700 CL2.5 ECC DDR.8. Maximum storage is based on three 120GB IDE HDDs, which requires replacing the standard 40GB HDD.9. Maximum storage is based on four 146.8GB SCSI HDDs which requires replacing the standard 36.4GB HDD.10. The NVIDIA Quadro FX 1000 and NVIDIA Quadro FX 3000 video adapters require the use of one power drop that would normally be used for anIDE or SCSI device. In SCSI models with one of these adapters installed, one media bay will not be available for installation of a SCSI or IDE device.11. Installation of the NVIDIA Quadro FX 3000 video adapter physically prevents installation of a PCI adapter in slot PCI 1.12. Maximum storage is based on two 160GB SATA HDDs which requires replacing the standard 80GB HDD.13. Standard memory is PC3200 CL3 ECC DDR.14. Ships with a PC DOS 2000 License and is not preloaded with an operating system.15. Ships preloaded with Red Hat Enterprise Linux WS 3 operating system.IntelliStation M Pro 6230 Memory OptionsSBBNumberOptionNumberMemory Description 1, 274P5096 06P4053 256MB PC2700 ECC DDR UDIMM74P5097 06P4054 512MB PC2700 DDR UDIMM74P5098 06P4055 1GB PC2700 ECC DDR UDIMM74P5112 06P4049 256MB PC3200 ECC DDR UDIMM74P5113 06P4050 512MB PC3200 ECC DDR UDIMM74P5114 06P4051 1GB PC3200 ECC DDR UDIMM1. A single DIMM configuration is valid if installed in socket DIMM1, otherwiseDIMMs must be configured in matched pairs starting with DIMM sockets 1 and 3,then 2 and 4. Single DIMMs require the standard DIMM either be matched or removed,before adding additional memory in pairs.2. All DIMM speeds within a configuration must match. All PC3200 or all PC2700.18 Configuration and Options Guide


Refer to the Important Notices section for important noticesIntelliStation M Pro 6230 Hard Disk Drive (HDD) and Optical StorageOptionsSBBNumberOptionNumberDescription Height BaysSupportedMaximumQuantitySATA HDDs 1, 274P5102 09N4253 80GB 7200rpm Serial ATA 3SL 4, 5, 6, 7 2 490P0581 09N4254 160GB 7200rpm Serial ATA SL 4, 5, 6, 7 2 4EIDE HDD 574P5145 22P7157 40GB 7200rpm ATA-100 (EIDE) HDD 6SL 4, 6, 7 349P2895 09N4226 80GB 7200rpm ATA-100 (EIDE) HDD SL 4, 6, 7 302R2677 09N4231 120GB 7200rpm ATA-100 (EIDE) HDD SL 4, 6, 7 3Nonhot-swap Ultra320 SCSI HDDs 7, 832P0753 32P0723 36.4GB 10Krpm Ultra320 SCSI HDD SL 4, 5, 6, 7 432P0754 32P0724 73.4GB 10Krpm Ultra320 SCSI HDD SL 4, 5, 6, 7 432P0755 32P0725 146.8GB 10Krpm Ultra320 SCSI HDD - 4, 5, 6, 7 432P0751 32P0784 36.4GB 15Krpm Ultra320 SCSI HDD SL 4, 5, 6, 7 432P0752 32P0785 73.4GB 15Krpm Ultra320 SCSI HDD SL 4, 5, 6, 7 4Optical Drives 971P8149 10K3782 48x-20x CD-ROM Black Internal IDE Drive HH 1, 2 290P4239 22P7042 48x/32x/48x Max CD-RW Drive HH 1, 2 202R3278 22P6950 16x Max RAM-Read DVD-ROM Drive HH 1, 2 226K8793 73P3305 Multi-Burner Plus HH 1, 2 21. Up to two SATA HDDs can be installed in EIDE and SCSI models. Each SATA HDD option ships with one SATA cable.2. SATA models support a maximum of two SATA devices and three IDE devices.3. Standard HDD on SATA models. Installed in bay seven.4. Four SATA HDDs are supported with the installation of the optional ServeRAID-7t RAID controller.5. IDE models support a maximum of four IDE devices.6. Standard HDD on EIDE models. Installed in bay six.7. Standard HDD on EIDE models. Installed in bay six.8. Mixing of 10,000rpm and 15,000rpm HDDs is allowed.9. Standard optical drive is installed in Bay 1.Bay Form Factor Height Front Access Usage1 133mm (5.25in) HH Yes Std. Optical 12 133mm (5.25in) HH Yes Optical, Tape, Zip 13 89mm (3.5in) SL Yes Std. FDD4 89mm (3.5in) SL Yes HDD, Tape, Zip5, 6 89mm (3.5in) SL No HDD 27 89mm (3.5in) SL No Std. HDD1. Supports removable media devices only. Hard disk drives are not supported.2. IDE HDDs are not supported in bay five.Chapter 2. IntelliStation M Pro 6230 19


M Pro 6230 front viewIntelliStation M Pro 6230 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCISupport 1SlotsSupported 2, 3Storage Controllers24P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller 4Half 64-bit 1 ... 571P8651 71P8648 ServeRAID-7t SATA Controller Half 64-bit 1 ... 571P8605 71P8592 ATA133 RAID Controller 5Half 32-bit 1 ... 5Networking 4, 502R3435 22P6501 Pro/1000 T Desktop Ethernet Adapter by Intel Half 32-bit 1 ... 531P9605 31P9601 PRO/1000 MT Server Ethernet Adapter by Intel Half 64-bit 1 ... 5- 73P2701 PRO/1000 MT Dual Port Server Ethernet Adapter byIntelHalf64-bit/133MHz1 ... 532P9298 31P6401 NetXtreme Dual Port Gb Ethernet Adapter Half 64-bit 1 ... 532P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit 1 ... 531P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) Half 64-bit 1 ... 5Communications32P8862 33L4618 V.90 PCI Data/Fax Modem Half 32-bit 1 ... 5- 31P7201 V.90 Data/Fax Soft Modem Half 32-bit 1 ... 51. A 64-bit adapter installed into a 32-bit slot transfers data at 32-bit rates. Adapters rated at 66MHz or higher will operate at 33MHz wheninstalled in a 33MHz slot.2. IntelliStation M Pro 6230 has five full-length PCI expansion slots on a single 32-bit, 33MHz bus.3. Models with the NVIDIA Quadro FX 1000 or 3000 video adapter installed will not have access to PCI slot 1. These adapters physicallyprevent installation of a PCI adapter in slot PCI 1.4. The integrated 10/100/1000 Intel-based Ethernet controller supports Wake on LAN.5. Wake on LAN® is supported through PCI networking adapters that provide this function.20 Configuration and Options Guide


Refer to the Important Notices section for important noticesPCI 1 - PCI 5: Bus 3, 33MHz, 23-bit, 5v, full-length, PCIM Pro 6230 rear viewChapter 2. IntelliStation M Pro 6230 21


IntelliStation M Pro 6230 Power and AccessoriesSBBNumberOptionNumberDescriptionPowerIntelliStation M Pro 6230 includes a 340w voltage-sensing power supply and a single line cord.Tower Uninterruptible Power Supply (UPS)- 21301TX UPS750TLV- 21302TX UPS750THV- 21303TX UPS1000TLV- 21304TX UPS1000THV- 21305TX UPS1500TLV- 21306TX UPS1500THVMonitors- 673766N C170 ThinkVision 17in CRT Flat Panel Monitor (406.4mm, 16in viewable image), business black- 6636HB1 L150p ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image), business black- 6734HB0 L170p ThinkVision 17in LCD Flat Panel Monitor (432mm, 17in viewable image), business black- 2704HB7 L190p ThinkVision 19in TFT Flat Panel Monitor (483mm, 19in viewable image), business blackConversion Kit- 09N4300 4Ux20D Tower-to-Rack KitKeyboard and Mouse 102R3452 31P7415 Preferred Pro Full-size Keyboard - 104 Keys business black 202R3421 28L3673 Sleek 2-Button Mouse, business black02R3434 31P8700 Optical 3-button Scrollpoint Pro Mouse - 800dpi - PS/2 and USB13M7124 06P4069 USB Optical Wheel Mouse- 33L3252 SpaceBall 3D Input DeviceOther Accessories02R3451 00N8078 250MB IDE Internal Zip Drive 3- 22P9024 64MB USB 2.0 Memory Key- 22P9025 256MB USB 2.0 Memory Key- 05K9276 Portable USB Diskette Drive1. IntelliStation M Pro 6230 ships standard with an IBM 104-key keyboard and three-button mouse.2. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard try witha flat panel display.3. Supported in bays 1, 2 and 4. Hardware for installing into a 5.25in bay is included with the option.22 Configuration and Options Guide


Refer to the Important Notices section for important noticesIntelliStation M Pro 6230 Tape OptionsSBBNumberOptionNumberTape Drives 1BaysSupported 2StorageInterfaceForm FactorExt TapeEnclosures32P8861 00N7991 20/40GB DDS/4 4mm Internal TapeDrive71P9176 71P9145 36/72GB DDS/5 Internal SCSI TapeDriveExternal Tape Enclosures 12 Ultra2 (16-bit) 89mm (3.5in)HH or 133mm(5.25in) HH2 Ultra2 (16-bit) 89mm (3.5in)HH or 133mm(5.25in) HH35100203510020- 3510020 External Half-High SCSI StorageEnclosure 3, 4- LVD (16-bit) Desktop -Associated Options- 00N7956 68-pin External Multimode LVD/SE SCSITerminator- LVD/SE (16-bit) External 3510020Note: SCSI models include an integrated single-channel Ultra320 SCSI controller, a 68-pin, four-drop multimode terminatedU320 SCSI cable and a two-drop IDE cable. IDE models include two two-drop IDE cables. SATA models include a one-dropIDE cable attached to the standard optical drive and one two-drop IDE cable.Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributesand Tape Library Attributes appendices, respectively.1. IDE models and external tape enclosures require an optional SCSI controller in order to support SCSI tape drives.2. The standard optical drive is installed in bay 1.3. External cables are not included. Refer to Appendix D: Cables - Storage Units - Controllers to select a supported cable.4. Requires the 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).Chapter 2. IntelliStation M Pro 6230 23


24 Configuration and Options Guide


Chapter 3. IntelliStation Z Pro 6221IntelliStation Z Pro 6221 At-A-GlancePart Number 1Processors/FSB Speed (GHz/MHz) 2Number of Processors (Std/Max)CacheMemory (Std/Max) 3Video Adapter (AGP)Form FactorOnboard Ethernet (Mbps) 4Storage Controller 5IEEE 1394Internal HDD Storage (Std/Max)Optical DriveBays (Total/Avail)PCI Slots (Total/Avail)6221-33U 2.8/533 1/2 512KBL2512MB/8GBNVIDIAQuadro4 280NVSTower 1Gb DualU320N36.4GB/440.4GB 648x-20x CDROM 6/3 5/56221-38U 2.8/533 1/2 512KBL21GB/8GBNVIDIAQuadro4 980XGLTower 1Gb DualU320N36.4GB/440.4GB 648x/24x/48xCD-RW6/3 5/56221-40U 3.06/533 1/2 512KBL2512MB/8GBMatroxMillennium G450DVITower 1Gb IDE N 40GB/240GB 748x-20x CDROM 6/3 5/56221-42U 3.06/533 1/2 512KBL2512MB/8GBNVIDIAQuadro4 280NVSTower 1Gb IDE N 40GB/240GB 7 48x-20x CDROM 6/3 5/56221-46U 3.06/533 1/2 512KBL21GB/8GBNVIDIAQuadro4 980XGLTower 1Gb DualU320Y36.4GB/440.4GB 648x/24x/48x/16xCD-RW/DVD6/3 5/56221-49U 3.06/533 2/2 512KBL21GB/8GBNVIDIAQuadro4 280NVSTower 1Gb DualU320Y36.4GB/ DVD 6/3 5/5440.4GB 66221-52U 3.2/533 1/2 1MB L3 512MB/8GBNVIDIA Quadro4280NVSTower 1Gb IDE N 40GB/240GB 7 48x-20x CDROM 6/3 5/56221-53U 3.2/533 1/2 1MB L3 512MB/8GBNVIDIA Quadro4980XGLTower 1Gb IDE Y 40GB/240GB 748x-24x-48xCD-RW6/3 5/56221-56U 3.2/533 1/2 1MB L3 512MB/8GBNVIDIA Quadro4980XGLTower 1Gb DualU320Y36.4GB/440.4GB 648x-24x-48xCD-RW6/3 5/56221-59U 3.2/533 1/2 1MB L3 1GB/8GB NVIDIA Quadro FX3000Tower 1Gb DualU320Y36.4GB/440.4GB 648x-24x-48xCD-RW6/3 5/4 66221-66U 83.2/533 1/2 1MB L3 2GB/8GB NVIDIA Quadro4980XGTower 1Gb DualU320Y36.4GB/440.4GB 748x-24x-48xCD-RW6/3 5/56221-67U 3.2/533 1/2 1MB L3 1GB/8GB NVIDIA Quadro FX1100Tower 1Gb DualU320Y36.4GB/440.4GB 748x-24x-48x-16xCD-RW/DVD6/3 5/586221-68U 3.2/533 1/2 1MB L3 2GB/8GB NVIDIA Quadro FX1100Tower 1Gb DualU320Y36.4GB/440.4GB 948x-24x-48x-16xCD-RW/DVD6/3 5/51. IntelliStation Z Pro 6221 ships with a keyboard and mouse. See "Power and Accessories" for a list of compatible monitors. Tower models are rackmountableusing an optional tower-to-rack conversion kit, or they can be turned on the side and installed as desktop units capable of supportingthe weight of a monitor.2. Intel Xeon processor with advanced transfer ECC L2 cache and 533MHz (quad-pumped) Front Side Bus (FSB). Some processors have an additionalL3 cache as noted in the table above.3. High-speed, two-way interleaved 133MHz DDR PC2100 RDIMM. Maximum capacity includes four 2GB RDIMMs, requiring replacement of thetwo standard RDIMMs.4. A Broadcom-based copper gigabit Ethernet controller is integrated into the planar.5. All models include both an integrated ATA-100 IDE controller and an integrated dual channel Ultra320 SCSI controller. The integrated SCSI controllersupports onboard mirroring.6. Installation of the 3Dlabs Wildcat4 7110 of the NVIDIA Quadro FX 3000 video adapter will physically prevent installation of a PCI adapter in theadjacent PCI slot (PCI slot one).7. Maximum storage is based on three 146.8GB SCSI HDDs, which requires replacing the standard 36.4GB HDD.8. Ships with a PC DOS 2000 License. Other models ship preloaded with Microsoft Windows XP Professional.9. Maximum storage is based on two 120GB IDE HDDs, which requires replacing the standard 40GB HDD.25


IntelliStation Z Pro 6221 Processor OptionsSBBNumberOptionNumberProcessor UpgradesSMPSupport 159P4843 59P5110 2.8GHz/533MHz-512KB L2 Cache Xeon Processor 3xU71P8339 24P8123 3.06GHz/533MHz-512KB L2 Cache Xeon Processor 4xU13N1509 13N0691 3.2GHz/533MHz-1MB L3 Cache Xeon Processor 5xU1. One additional processor may be installed, providing a maximum of two. All processors must beidentical in type, speed and cache size.IntelliStation Z Pro 6221 Memory OptionsSBBNumberOptionNumberMemory Description 132P0915 33L5037 256MB DDR PC2100 ECC RDIMM37L3538 33L5038 512MB DDR PC2100 ECC RDIMM33P3126 33L5039 1GB DDR PC2100 ECC RDIMM32P9223 33L5040 2GB DDR PC2100 ECC RDIMM1. Due to two-way interleaving, installation of memory options in matched pairsbeginning with RDIMMs three and four is required. Standard RDIMMs are installedin sockets three and four.CPU 1CPU 2RDIMM 1RDIMM 2RDIMM 3RDIMM 4Top of vertical planar26 Configuration and Options Guide


Refer to the Important Notices section for important noticesIntelliStation Z Pro 6221 Hard Disk Drive (HDD) and Optical StorageOptionsSBBNumberOptionNumberDescription Height BaysSupportedMaximumQuantityIDE HDDs 1, 249P2893 22P7157 40GB 7200rpm ATA-100 (EIDE) HDD SL 4 ... 6 249P2895 09N4226 80GB 7200rpm ATA-100 (EIDE) HDD SL 4 ... 6 202R2677 09N4231 120GB 7200rpm ATA-100 (EIDE) HDD SL 4 ... 6 2Nonhot-swap Ultra320 HDDs 2, 332P0753 32P0723 36.4GB 10Krpm Ultra320 SCSI HDD SL 4 ... 6 332P0754 32P0724 73.4GB 10Krpm Ultra320 SCSI HDD SL 4 ... 6 332P0755 32P0725 146.8GB 10Krpm Ultra320 SCSI HDD SL 4 ... 6 332P0751 32P0784 36.4GB 15Krpm Ultra320 SCSI HDD SL 4 ... 6 332P0752 32P0785 73.4GB 15Krpm Ultra320 SCSI HDD SL 4 ... 6 3Removable Media Devices 4, 590P4239 22P7042 48X/32X/48X Max CD-RW Drive HH 1, 2 226K8793 73P3305 Multi-Burner Plus HH 1, 2 271P8149 10K3782 48x-20x CD-ROM Black Internal IDE Drive HH 1, 2 202R3278 22P6950 16x Max RAM-Read DVD-ROM Drive HH 1, 2 224P9574 00N8078 250MB IDE Internal Zip Drive SL 1, 2 1Associated Options59P4923 24P7929 Enabling Cable for External Ultra320 SCSI Port 6- - 11. IDE models ship with two two-drop IDE cables supporting four IDE devices of which only two can be HDDs.2. Standard HDD installed in bay six for both SCSI and IDE models.3. SCSI models ship with a three-drop LVD SCSI cable supporting up to three SCSI HDDs.4. Standard optical drive is installed in Bay 1.5. DVD video playback is not supported for models that include a 3Dlabs Wildcat4 7110 video adapter.6. Required to enable the external 68-pin high density SCSI port. Attaches to Channel B of the integrated Ultra320 SCSI controller.Bay Form Factor Height Front Access Usage1 133mm (5.25in) HH Yes Std. Optical 12 133mm (5.25in) HH Yes Optical/Tape 13 89mm (3.5in) SL Yes Std. FDD4, 5 89mm (3.5in) SL No HDD6 89mm (3.5in) SL No Std. HDD1. Supports removable media devices only. Hard disk drives are not supported.Chapter 3. IntelliStation Z Pro 6221 27


Bay 1Bay 2Bay 3Bay 6Bay 5Bay 4Z Pro 6221 front viewIntelliStation Z Pro 6221 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCISupport 1SlotsSupported 2Storage Controllers 3, 424P2650 19K4646 PCI Wide Ultra160 SCSI Adapter Half 64-bit 1 ... 571P8614 71P8594 Single Channel Ultra320 SCSI Controller Half 64-bit 1 ... 524P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit 2 ... 571P8605 71P8592 ATA133 RAID Controller Half 32-bit 1 ... 5Networking 524P9559 22P4501 Intel Pro/100S Desktop Ethernet Adapter 6Half 32-bit 1 ... 502R3435 22P6501 6Pro/1000 T Desktop Ethernet Adapter by Intel Half 32-bit 1 ... 532P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit 2 ... 5Communications 732P8862 33L4618 V.90 PCI Data/Fax Modem Half 32-bit 11. A 32-bit adapter installed into a 64-bit slot will restrict the data transfer rate to 32-bit. Adapters rated at 66MHz will operate at 33MHzwhen installed in a 33MHz slot. 33MHz adapters will reduce 100MHz buses to 33MHz. 133MHz PCI-X adapters are backward compatiblewith 33/66MHz, 64-bit PCI-based servers, but will only operate at the rated bus frequency or frequency of the slowest adapter in the busin which it is installed. 64-bit adapters are not supported in slot one.2. When the NVIDIA Wildcat4 7110 video adapter is installed in the AGP slot, slot one is unavailable due to the width of the adapter. SCSImodels do not support 64-bit or PCI-X adapters in slot one due to interference caused by the IEEE 1394 Firewire digital multimedia port.3. The dual-channel, Ultra320 integrated controller supports both Ultra160 and Ultra320 HDDs, but the entire SCSI bus will default to theslower rate (MB/second) if HDDs of different technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocatedfor mirroring if a RAID adapter is not installed. One additional HDD may be designated as a hot-spare for HDDs configured in the onboardmirror. Mirrored and hot-spare HDDs must be matched.4. Z Pro 6221 includes a dual-channel Ultra320 SCSI controller with two internal connectors. An external high-density 68-pin connectorcan be enabled using optional Enabling Cable for External Ultra320 SCSI Port (P/N 24P7929) to connect channel B to an external SCSI connector.External connection using this option and the external knockout is not supported if both channels of the integrated controller areconnected internally, in which case a supported PCI SCSI controller is required to support an external SCSI device.5. The integrated copper 10/100/1000Mbps Broadcom (BCM5703) single-port Ethernet controller supports Wake on LAN.6. Wake on LAN is supported through this adapter if proper shut-down procedures were followed.7. IntelliStation Z Pro 6221 includes four USB ports (two each on front and rear of the chassis), two nine-pin serial ports, one 25-pin parallelport, audio in/out jacks and a microphone in jack. An integrated IEEE 1394 digital multimedia port is provided in models that supportSCSI HDDs (slot one in these models is not available for 64-bit or PCI-X adapters).28 Configuration and Options Guide


Refer to the Important Notices section for important noticesAGP slotPCI slot 1PCI slot 2PCI slot 3PCI slot 4PCI slot 5Z Pro 6221 rear viewSlot 1: Bus C, 32-bit, 33MHz, 5v, half-lengthSlot 2: Bus A, 64-bit, 100MHz, 3.3v, full-length, PCI-XSlot 3: Bus A, 64-bit, 100MHz, 3.3v, full-length, PCI-XSlot 4: Bus B, 64-bit, 100MHz, 3.3v, full-length extended, PCI-XSlot 5: Bus B, 64-bit, 100MHz, 3.3v, full-length, PCI-XIntelliStation Z Pro 6221 Power and AccessoriesSBBNumberOptionNumberDescriptionPower- - IntelliStation Z Pro 6221 includes a 425w voltage-sensing power supply and a single line cord.Rack-mount Uninterruptible Power Supply (UPS)- 32P1020 APC 2U Smart-UPS 1400RMBMonitors- 673766N ThinkVision C170 17in CRT Flat Panel Monitor (406.4mm, 16in viewable image), business blackConversion Kit- 09N4300 4Ux20D Tower-to-Rack KitKeyboard and Mouse 102R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys business black02R3421 28L3673 Sleek 2-button Mouse, business black13M7124 06P4069 USB Optical Wheel Mouse02R3434 31P8700 Optical 3-button Scrollpoint Pro Mouse - 800dpi - PS/2 and USB02R3486 31P7405 Optical 3-button Scrollpoint Mouse - 800dpi - PS/2 and USB- 33L3252 SpaceBall 3D Input Device1. IntelliStation Z Pro 6221 ships standard with an IBM 104-key keyboard and three-button mouse.Chapter 3. IntelliStation Z Pro 6221 29


IntelliStation Z Pro 6221 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupported 1SCSIInterface(bit)Form FactorExt TapeEnclosures 232P8861 00N7991 20/40GB DDS/4 4mm Internal TapeDrive2 16 Ultra2LVD89mm (3.5in) HHor 133mm (5.25in)HH3510020 371P9176 71P9145 36/72GB DDS/5 Internal SCSI TapeDrive2 Ultra2(16-bit)89mm (3.5in) HHor 133mm (5.25in)HH3510020 3External Tape Enclosures- 3510020 External Half-High SCSI StorageEnclosure 4Associated Options- 00N7956 68-pin External Multimode LVD/SE SCSITerminator- 24P7929 Enabling Cable for External Ultra320 SCSIPort- LVD(16-bit)- LVD/SE(16-bit)- LVD(16-bit)Desktop -External 3510020Internal -Note: All models include an integrated Ultra320 SCSI controller. SCSI models include a three-drop multimode terminatedLVD SCSI cable and one two-drop IDE cable. IDE models include two two-drop IDE cables. To enable external attachment tochannel B of the integrated SCSI controller, optional Enabling Cable for External Ultra320 SCSI Port (P/N 24P7929) isrequired, which provides a 68-pin HD external connector.Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributesand Tape Library Attributes appendices, respectively.1. The standard optical drive is installed in bay 1.2. To determine external cable requirements, note the tape drive's SCSI interface, the appropriate SCSI controller from the system configuratorsection and the desired enclosure, then refer to Appendix D: Cables - Storage Units - Controllers.3. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).4. Black desktop tape enclosure that supports a single 133mm (5.25in) half-high (HH) tape drive. Internal and external connectors are68-pin high-density supporting LVD. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956). External cablesare not included. Refer to Appendix D: Cables - Storage Units - Controllers to select a supported cable.30 Configuration and Options Guide


Chapter 4. Intellistation Z Pro 6223Intellistation Z Pro 6223 At-A-GlancePart Number 1CPU/FSB Speed (GHz/MHz) - Cache 2Number of Processors (Std/Max)Memory (Std/Max) 3Video Adapter (PCle)Form Factor 4Integrated Ethernet (Mbps) 5Storage Controller 6Internal HDD InterfaceInternal HDD Storage (Std/Max) 7, 8Optical DriveBays (Total/Avail)PCI Slots (Total/Avail) 96223-10Y 3.4/8001MB L21/2 512MB/8GBNVIDIA Quadro280NVSMinitower1GB SATA FixedSATA80GB/1000GBCD-ROM (48x-20x) 6/4 6/56223-11Y 3.4/8001MB L21/2 1GB/8GB NVIDIA Quadro280NVSMinitower1GB SATA FixedSATA80GB/1000GBCD-RW(48x-24x-48x)6/4 6/56223-14Y 3.4/8001MB L21/2 1GB/8GB NVIDIA Quadro FX3400Minitower1GB U320 FixedSCSI73GB/587.2GBCD-RW/DVD(48x-32x-48x-16x)6/4 6/56223-21Y 3.6/8001MB L21/2 1GB/8GB NVIDIA Quadro FX1300Minitower1GB SATA FixedSATA80GB/1000GBCD-RW(48x-24x-48x)6/4 6/56223-22Y 3.6/8001MB L21/2 1GB/8GB NVIDIA Quadro FX1300Minitower1GB U320 FixedSCSI73GB/587.2GBCD-RW(48x-24x-48x)6/4 6/56223-23Y 3.6/8001MB L21/2 1GB/8GB NVIDIA Quadro FX3400Minitower1GB SATA FixedSATA80GB/1000GBCD-RW/DVD(48x-32x-48x-16x)6/4 6/56223-24Y 3.6/8001MB L21/2 1GB/8GB NVIDIA Quadro FX3400Minitower1GB U320 FixedSCSI73GB/587.2GBCD-RW/DVD(48x-32x-48x-16x)6/4 6/56223-28Y 103.6/8001MB L21/2 1GB/8GB NVIDIA Quadro FX1300Minitower1GB U320 FixedSCSI73GB/587.2GBCD-RW(48x-24x-48x)6/4 6/5106223-29Y 3.6/8001MB L22/2 1GB/8GB NVIDIA Quadro FX3400Minitower1GB U320 FixedSCSI73GB/587.2GBCD-RW(48x-24x-48x)6/4 6/5Note: Intellistation Z Pro (6223) also provides six USB ports (two front/four rear), two IEEE 1394A ports (one front/one rear), two 9-pinserial ports and one 25-pin parallel port. A keyboard and mouse is also provided. A diskette drive is not provided.1. Model numbers provided are worldwide generally available variant (GAV) model number which are not orderable as listed and need to be modifiedby country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 6223-10Y is6223-10U. See the product specific Official IBM announcement letter for other country-specific GAV model numbers. GAV to MTM mapping for L.A.and A.P. Geographies follow the same pattern. Substitute the last character with the country-specific designator.2. Intel Xeon processor with Extended Memory 64 Technology (EM64T), L2 cache and an 800MHz (quad-pumped) Front Side Bus (FSB).3. High-speed, two-way interleaved PC2-3200 RDIMMs. Maximum capacity requires replacing the standard DIMMs. Z Pro (6223) will support 16GBof memory if/when a supported 4GB DIMM becomes available.4. A 5U tower-to-rack conversion kit is available. See ’Power and Accessories.’5. Broadcom 5721 copper gigabit Ethernet controller with Wake-on-LAN support.6. Integrated dual-channel Ultra320 SCSI storage controller on SCSI models, two SATA controllers on SATA models supporting one SATA HDD percontroller. Both the SCSI and SATA integrated controllers support Integrated ServeRAID-7e (RAID-0 and RAID-1).7. Maximum storage capacity for SATA models is based on four 250GB SATA HDDs which requires installation of the optional ServeRAID-7t RAIDcontroller and replacement of the standard HDD. Standard configuration will support two SATA HDDs.8. Maximum storage capacity for SCSI models is based on three 146.8GB HDDs.9. The standard graphics adapter occupies the PCI Express slot.10. Ships with Red Hat Enterprise Linux WS 3 License. Other models ship preloaded with Microsoft Windows XP Professional.31


Intellistation Z Pro 6223 Processor OptionsSBB NumberOptionNumberProcessor Options SMP Support 190P1032 13N0674 3.4GHz/800MHz-1MB L2 Cache, Xeon Processor 1xY90P1050 13N0675 3.6GHz/800MHz-1MB L2 Cache, Xeon Processor 2xYNote: Z Pro (6223) processor options support Intel’s Extended Memory 64 Technology (EM64T).1. One additional processor may be installed, providing a maximum of two. All processors must be identical intype, speed and cache size.Intellistation Z Pro 6223 Memory OptionsSBB Number 1Option NumberMemory Options90P0870 73P3523 512MB (2x256MB) PC2-3200 ECC DDR2 RDIMM Kit90P1218 73P3522 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit73P2873 73P2865 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit 273P2874 73P2866 2GB (2x1GB) PC2-3200 ECC DDR2 RDIMM Kit 273P2875 73P2867 4GB (2x2GB) PC2-3200 ECC DDR2 RDIMM Kit 2, 3Note: 8GB of memory is supported via six DIMM slots with currently available options. Z Pro(6223) will support 16GB of memory if/when a supported 4GB DIMM becomes available. Dueto two-way interleaving, installation of memory DIMMs in matched pairs is requiredbeginning with DIMM slots 1 and 2, then 3 and 4, then 5 and 6.1. Quantity two of each SBB PN must be ordered to equal its corresponding option.2. Supports Chipkill. Mixing Chipkill DIMMs with nonChipkill DIMMs will disable all Chipkillfunction.3. 2GB DIMMs can only be installed in slots 1, 2, 3 and 4. If mixing 2GB DIMMs with other sizeDIMMs, only two 2GB DIMMs can be installed and they must be installed in slots 1 and 2.Model10YStd. DIMM Configuration2 x 256MB PC2-3200 ECC DDR2 SDRAM RDIMM11Y, 14Y, 2xY 2 x 512MB PC2-3200 ECC DDR2 SDRAM RDIMM32 Configuration and Options Guide


Refer to the Important Notices section for important noticesSlot 2, PCISlot 3, PCISlot 4, PCI-XSlot 5, PCI-XDIMM 3Slot 1, PCIExpress x16DIMM 4DIMM 5DIMM 2DIMM 1DIMM 6Slot 6, PCI-XZ Pro 6223 System BoardBattery Microprocessor 2 Microprocessor 1Chapter 4. Intellistation Z Pro 6223 33


Intellistation Z Pro 6223 Hard Disk Drive (HDD) and Optical StorageOptionsSBB NumberOptionNumberDescription Height Bays Supported 1Max Qty 2SATA HDDs 374P5102 09N4253 80GB 7200 rpm SATA HDD SL 3 ... 6 490P0581 09N4254 160GB 7200 rpm SATA HDD SL 3 ... 6 4- 73P8006 250GB 7200 rpm Simple-swap SATA HDD 4SL 3 ... 6 4Fixed (Nonhot-swap) Ultra320 HDDs32P0753 32P0723 36.4GB 10K rpm Ultra320 SCSI HDD SL 3 ... 6 432P0751 32P0784 36.4GB 15K rpm Ultra320 SCSI HDD SL 3 ... 6 432P0754 32P0724 73.4GB 10K rpm Ultra320 SCSI HDD SL 3 ... 6 432P0752 32P0785 73.4GB 15K rpm Ultra320 SCSI HDD SL 3 ... 6 432P0755 32P0725 146GB 10K rpm Ultra320 SCSI HDD SL 3 ... 6 4Associated Options24P7970 24P7929 Ultra320 External SCSI Interface Kit 524P7970 24P7973 Ultra320 External SCSI Interface Kit 6- - 1- - 1Optical Devices32P8852 10K3782 48x-20x CD-ROM Internal IDE Drive (Black) HH 1, 2 202R3278 22P6950 16x Max RAM-Read DVD-ROM Drive HH 1, 2 290P4239 22P7042 48x/32x/48x Max CD-RW HH 1, 2 226K8792 73P3300 48x/32x/48x/16x Max CD-RW/DVD-ROMCombination DriveHH 1, 2 226K8793 73P3305 Multi-Burner Plus HH 1, 2 21. May require removing standard devices.2. Four SATA HDDs are supported with the installation of the optional ServeRAID-7t controller. Two HDDs are supported in the standard configuration.3. Mixing SATA and SCSI HDDs is not supported.4. Installation of this HDD option will require removing the simple-swap tray that ships with the HDD.5. Required to enable a 68-pin high density external SCSI connector. Connects to the second channel of the integrated SCSI controller.6. Required to enable a 0.8mm VHDCI external SCSI connector. Connects to the second channel of the integrated SCSI controller.Bay Form Factor Height Front Access Usage1 133mm (5.25in) HH Yes Optical2 133mm (5.25in) HH Yes Optical/Tape/Zip3 89mm (3.25in) SL Yes FDD/HDD4 ... 6 89mm (3.25in) SL No HDD 1Note: HDDs are installed in the following order: bays 6, 5 and 4.1. Standard HDD is installed in bay 6.34 Configuration and Options Guide


Refer to the Important Notices section for important noticesZ Pro 6223 Front ViewIntellistation Z Pro 6223 I/O OptionsSBB NumberOptionNumberDescriptionAdapterLengthPCI SupportSlots SupportedStorage Controllers 124P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller Full 64-bit/133MHz 4 ... 6- 71P8648 ServeRAID-7t SATA Controller Half 64-bit/66MHz 4 ... 6Networking- 73P2701 Pro/1000 MT Dual Port Ethernet Adapter Half 64-bit/133MHz 4 ... 602R3435 22P6501 Pro/1000T Desktop Adapter by Intel Half 32-bit/33MHz 2 ... 632P9298 31P6401 NetXtreme Gigabit Dual Port Adapter Half 64-bit/133MHz 4 ... 6Other I/O32P8862 33L4618 V.90 PCI Data/Fax Modem 2Half 32-bit/33MHz 2, 31. Currently only one type of RAID is supported at a time; for example, ServeRAID-7e (RAID-0 or RAID-1 with integrated controller),ServeRAID-4Lx or ServeRAID-7t, etc.2. Due to homologation variances, modem availability may differ by country.Chapter 4. Intellistation Z Pro 6223 35


Power cordMouseKeyboardParallelSerial 1VideoUSB 1USB 2EthernetSerial 2PCI Slots 1 - 6Slot 1: Bus PCI Express, 32-bit, 33MHz, 5v, PCI Express, half-lengthSlot 2: Bus PCI, 32-bit, 33MHz, 5v, PCI, half-lengthSlot 3: Bus PCI, 32-bit, 33MHz, 5v, PCI, full-lengthSlot 4: Bus PCI-X Channel B, 64-bit, 133MHz, 3.3v, PCI-X, full-lengthSlot 5: Bus PCI-X Channel A, 64-bit, 100MHz, 3.3v, PCI-X, full-lengthSlot 6: Bus PCI-X Channel A, 64-bit, 100MHz, 3.3v, PCI-X, full lengthZ Pro 6223 Rear View36 Configuration and Options Guide


Refer to the Important Notices section for important noticesIntellistation Z Pro 6223 Power and AccessoriesSBB NumberOptionNumberDescriptionPower- - Intellistation Z Pro 6223 includes a 530w voltage-sensing power supply and a single line cord.Tower Uninterruptible Power Supply (UPS)- 21301TX UPS750TLV- 21302TX UPS750THV- 21303TX UPS1000TLV- 21304TX UPS1000THV- 21305TX UPS1500TLV- 21306TX UPS1500THVRack-mount Uninterruptible Power Supply (UPS)- 32P1020 APC 2U Smart-UPS 1400RMB- 32P1022 APC 2U Smart-UPS 1400RMiBRack/Tower Conversion Kits- 13N2455 5Ux20D Tower-to-Rack KitKeyboard and Mouse 102R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys, Business Black- 31P8950 USB Keyboard with UltraNav - US English- 73P2620 USB Keyboard Enhanced Performance Keyboard - US English02R3421 28L3673 Sleek 2-Button Mouse, Business Black02R3426 33L3244 Sleek USB Mouse02R3434 31P8700 Optical 3-button ScrollPoint Pro Mouse - 800dpi - PS/2 and USB02R3486 31P7405 Optical 3-button ScrollPoint Mouse - 800dpi - PS/2 and USB- 33L3252 SpaceBall 3D Input DeviceOther Accessories02R3451 00N8078 250MB IDE Internal Zip Drive- 22P9025 256MB USB 2.0 Memory Key1. Intellistation Z Pro 6223 ships standard with an IBM 104-key keyboard and three-button mouse.Chapter 4. Intellistation Z Pro 6223 37


Intellistation Z Pro 6223 Tape OptionsSBB NumberOptionNumberTape DrivesBaysSupported 1Interface (bit) Form Factor Ext TapeEncl49P3228 48P7042 20/40GB TR7 Internal IDE Tape Drive 1, 2, 3 Std. IDE 89mm (3.5in) SL or133mm (5.25in) HH-32P8861 00N7991 20/40GB DDS/4 4mm Internal TapeDrive71P9176 71P9145 36/72GB DDS/5 Internal SCSI TapeDrive1, 2 16 Ultra2 LVD 89mm (3.5in) HH or133mm (5.25in) HH1, 2 Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH--- 59P6746 80/160GB VXA-2 SCSI Tape Drive 1, 2 Ultra2 (16-bit) 133mm (5.25in) HH -External Tape Enclosures- 4559HHX Half-High Tape Enclosure - Ultra160 (16-bit) Desktop or Rack Shelf(2.52in tall)-- 3510020 External Half-High SCSI StorageEnclosure 2- Ultra2 (16-bit) Desktop -Associated Options- 00N7956 68-pin External Multimode LVD/SESCSI Terminator- LVD/SE (16-bit) External 3510020Note: The integrated SCSI controller is available on SATA models for tape support only (internal or external).Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. Installation may require removing a standard device.2. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).38 Configuration and Options Guide


Chapter 5. IntelliStation A Pro 6224Intellistation A Pro 6224 At-A-GlancePart Number 1AMD Processor ModelNumber of Processors (Std/Max)CacheMemory (Std/Max) 2Video Adapter (AGP)Form Factor 3Onboard Ethernet (Mbps)Storage ControllerIEEE 1394Internal HDD Storage (Std/Max)Optical Drive (IDE)Bays (Total/Avail)PCI Slots (Total/Avail)6224-10U 244 1/2 1MB L2 1GB/16GB NVIDIAQuadro4280NVSMini-tower 1Gb IDE Y 80GB/320GB 448x-20xCD-ROM6/4 5/56224-20U 246 1/2 1MB L2 1GB/16GB NVIDIAQuadro4280NVSMini-tower 1Gb IDE Y 80GB/320GB 448x-20xCD-ROM6/4 5/56224-30U 248 1/2 1MB L2 1GB/16GB NVIDIAQuadro4280NVSMini-tower 1Gb IDE Y 80GB/320GB 448x/32x/48xCD-RW6/4 5/56224-33U 248 1/2 1MB L2 1GB/16GB NVIDIA QuadroFX 1100Mini-tower 1Gb U320 Y 36.4GB/584GB 548x/32x/48xCD-RW6/4 5/56224-35U 248 1/2 1MB L2 1GB/16GB NVIDIA QuadroFX 3000Mini-tower 1Gb U320 Y 36.4GB/584GB 548x/32x/48x/16x Max CD-RW/DVD-ROM6/4 5/4 66224-37U 7248 1/2 1MB L2 2GB/16GB NVIDIAQuadro4280NVSMini-tower 1Gb U320 Y 36.4GB/584GB 548x/32x/48xCD-RW6/4 5/576224-38U 248 1/2 1MB L2 1GB/16GB NVIDIA QuadroFX 1100Mini-tower 1Gb U320 Y 36.4GB/584GB 548x/32x/48x/16x Max CD-RW/DVD-ROM6/4 5/576224-39U 248 1/2 1MB L2 2GB/16GB NVIDIA QuadroFX 3000Mini-tower 1Gb U320 Y 36.4GB/584GB 548x/32x/48x/16x Max CD-RW/DVD-ROM6/4 5/4 61. IntelliStation A Pro 6224 also provides an integrated Broadcom 5703ci Gb Ethernet controller (WOL, ASF 2.0), five USB ports (three front / tworear), two 9-pin serial ports, two IEEE 1394A ports (one front / one rear) and one 25-pin parallel port. It supports a single 530w power supply, andships with a keyboard and mouse but without a diskette drive.2. Maximum capacity shown will be supported if/when a 2GB DIMM option is available. To achieve maximum memory capacity, an additionalCPU must be installed to provide support for four additional DIMMs.3. A rack mount kit is available.4. Maximum capacity for SATA models is based on two 160GB SATA HDDs.5. Maximum capacity for fixed (nonhot-swap) SCSI models is based on four 146.8GB fixed (nonhot-swap) SCSI HDDs.6. PCI slot four is not available for models using the NVIDIA Quadro FX 3000 adapter.7. Ships with Red Hat Enterprise Linux WS 3 License. Other models ship preloaded with Microsoft Windows XP Professional.Intellistation A Pro 6224 Processor OptionsSBBNumberOptionNumberProcessor Options 1SMPSupport 213N2862 13N0740 Opteron Processor Model 244 1xU13N2863 13N0741 Opteron Processor Model 246 2xU13N2864 13N0742 Opteron Processor Model 248 3xU1. Installing a second CPU provides an additional four memory DIMM slots for a total of eight.39


2. One additional processor may be installed, providing a maximum of two. Processor models mustmatch within a system.Intellistation A Pro 6224 Memory OptionsSBBNumber 1OptionNumberMemory Options 2, 373P3239 73P3233 1GB PC3200 ECC DDR RDIMM Kit73P3240 73P3234 2GB PC3200 ECC DDR RDIMM KitNote: All models ship with two matched, Chipkill DIMMs installed. Singleprocessor systems support a maximum of 8GB via four DIMM slots. Dualprocessor systems will support a maximum of 16GB via 8 DIMM slots if/whena 2GB DIMM is available. The optional processor complex card contains fourDIMM slots.1. Each SBB number contains a single DIMM.2. Each memory option kit contains two matching Chipkill DIMMs totaling thespecified amount. For example, option 73P3233 contains two 512MB DIMMs.3. Memory must be installed in matched pairs, starting with DIMM slots 1 and 2.While memory interleaving across processor complex cards is not supported, optimumsystem performance requires at least two DIMMs installed on each card.DIMM5 .. DIMM8DIMM4 .. DIMM1A Pro system board showing optional processor complex card40 Configuration and Options Guide


Refer to the Important Notices section for important noticesIntellistation A Pro 6224 Hard Disk Drive (HDD) and Optical StorageOptionsSBBNumberOptionNumberDescription Bays Supported Height MaximumQuantity 1SATA HDDs 202R8747 09N4253 80GB 7200 RPM SATA HDD 3 ... 6 SL 202R8748 09N4254 160GB 7200 RPM SATA HDD 3 ... 6 SL 2Fixed (Nonhot-swap) Ultra320 HDDs32P0753 32P0723 36.4GB 10K rpm Ultra320 SCSI HDD 3 ... 6 SL 432P0751 32P0784 36.4GB 15K rpm Ultra320 SCSI HDD 3 ... 6 SL 432P0754 32P0724 73.4GB 10K rpm Ultra320 SCSI HDD 3 ... 6 SL 432P0752 32P0785 73.4GB 15K rpm Ultra320 SCSI HDD 3 ... 6 SL 432P0755 32P0725 146.8GB 10K rpm Ultra320 SCSI HDD 3 ... 6 SL 4Optical Devices 332P8852 10K3782 48x-20x CD-ROM Internal IDE Drive (Black) 1, 2 HH 290P4239 22P7042 48x/32x/48x Max CD-RW 1, 2 HH 226K8793 73P3305 Multi-Burner Plus 1, 2 HH 226K8792 73P3300 48x/32x/48x/16x Max CD-RW/DVD-ROMCombination Drive1, 2 HH 202R3278 22P6950 16x Max RAM-Read DVD-ROM Drive 1, 2 HH 21. Up to four SATA HDDs are supported with the installation of the optional ServeRAID-7t SATA RAID controller.2. Mixing of different HDD technologies is supported. Follow installation order provided with the Bay Usage table.3. Standard optical drive is installed in Bay 1.Bay 1Form Factor Height FrontAccessUsage1 133mm (5.25in) HL Yes Std. Optical2 133mm (5.25in) HH Yes Optical/Tape3 89mm (3.5in) SL Yes Zip, Tape, HDD4 ... 6 89mm (3.5in) SL No Std. HDD 2Note: HDDs are installed in the following order: bays 4, 5, 6 and 3.1. The installation order for adding additional HDDs depends upon the A Promodel. For SCSI models, install all additional SCSI HDDs, then install any SATAHDDs. For SATA models, install all additional SATA HDDs, then install any SCSIHDDs.2. Standard HDD is installed in bay 4.Chapter 5. IntelliStation A Pro 6224 41


Bay 1Bay 2Bay 3Bay 6Bay 5Bay 4A Pro front viewIntellistation A Pro 6224 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCI SupportSlotsSupported 1Storage Controllers 213N2194 13N2190 ServeRAID-6i+ Controller Half 64-bit/133MHz 302R0995 32P0033 ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 1, 3, 4, 571P8651 71P8648 ServeRAID-7t SATA Controller Half 64-bit/66MHz 1 ... 571P8614 71P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz 1 ... 5Networking 331P9605 31P9601 10/100 Ethernet Server Adapter Half 64-bit / 133MHz 1 ... 502R3435 22P6501 PRO/1000 MT Server Ethernet Adapter by Intel Half 32-bit 1 ... 532P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit/133MHz 1 ... 51. Intellistation A Pro 6224 Models with the NVIDIA Quadro FX 3000 video adapter installed will not have access to PCI slot 4.2. All models have an integrated dual-channel, Ultra320 SCSI controller.3. All Models also provide an integrated Intel gigabit Ethernet controller that supports WOL and ASF.42 Configuration and Options Guide


Refer to the Important Notices section for important noticesPCI1 .. PCI3AGPPCI4 & PCI5PCI1: Bus 03, 100MHz, 64-bit, full length, 3.3v, PCI-XPCI2: Bus 02, 133MHz, 64-bit, 2/3 length, 3.3v, PCI-XPCI3: Bus 13, 100MHz, 64-bit, full length, 3.3v, PCI-XPCI4: Bus 0E, 100MHz, 64-bit, full length, 3.3v, PCI-XPCI5: Bus 0E, 100MHz, 64-bit, full length, 3.3v, PCI-XA Pro rear viewIntellistation A Pro 6224 Power and AccessoriesOptionNumberDescriptionPower 1Tower Uninterruptible Power Supply (UPS) 221301TX21302TXUPS750TLVUPS750THV1. A Pro 6224 Models include a 530w voltage sensing power supply with a single line cord.2. For runtimes and UPS attributes, see Appendix C: UPS Runtime Estimate.Chapter 5. IntelliStation A Pro 6224 43


SBBNumberOptionNumberDescriptionRack/Tower Conversion Kits- 09N4300 4Ux20D Tower-to-Rack KitMonitors- 2704HB7 L190p ThinkVision 19in TFT Flat Panel Monitor (483mm, 19in viewable image), business black- 6636AB1 L150 ThinkVision 15in LCD Flat Panel Monitor, (381mm, 15in viewable image), business black- 6636HB1 L150p ThinkVision 15in LCD Flat Panel Monitor, (381mm, 15in viewable image), business black- 6734HB0 L170p ThinkVision 17in LCD Flat Panel Monitor (432mm, 17in viewable image), business black- 673766N C170 ThinkVision 17in CRT Flat Panel Monitor (406.4mm, 16in viewable image), business black- 6739-60N C190 ThinkVision 19in CRT Flat Panel Monitor (457.3mm, 18in viewable image), business blackKeyboard and Mouse 102R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys, business black 202R3421 28L3673 Sleek 2-Button Mouse, business black13M7124 06P4069 USB Optical Wheel Mouse02R3486 31P7405 Optical 3-button ScrollPoint Mouse - 800dpi - PS/2 and USB02R3434 31P8700 Optical 3-button ScrollPoint Pro Mouse - 800dpi - PS/2 and USB- 33L3252 SpaceBall 3D Input DeviceOther Accessories02R3451 00N8078 250MB IDE Internal Zip Drive 3- 22P9025 256MB USB 2.0 Memory Key- 05K9276 USB Portable Diskette Drive1. A Pro 6224 Models ship standard with a 104-key keyboard and 3-button mouse.2. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat paneldisplay.3. Hardware for installing into a 5.25in bay is included with the option.Intellistation A Pro 6224 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupported 1SCSI/IDEInterfaceForm FactorExt TapeEnclosures 249P3228 48P7042 20/40GB TR7 Internal IDE Tape Drive 2, 3 Std. IDE 89mm (3.5in) SL or133mm (5.25in) HH-32P8861 00N7991 20/40GB DDS/4 4mm Internal TapeDrive2 Ultra2(16-bit)89mm (3.5in) HH or133mm (5.25in) HH351002071P9176 71P9145 36/72GB DDS/5 Internal SCSI TapeDrive2 Ultra2(16-bit)89mm (3.5in) HH or133mm (5.25in) HH351002071P9166 59P6746 80/160GB VXA-2 SCSI Tape Drive 2 Ultra2(16-bit)133mm (5.25in) HH 3510020External Tape Enclosures- 3510020 External Half High SCSI StorageEnclosure 3, 4 - Ultra2(16-bit)Desktop -Associated Options- 00N7956 68-pin External Multimode LVD/SESCSI Terminator- LVD/SE(16-bit)External 3510020Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributesand Tape Library Attributes appendices, respectively.44 Configuration and Options Guide


Refer to the Important Notices section for important notices1. The standard optical drive is installed in bay 1.2. To determine external cable requirements, note the tape drive's SCSI interface, the appropriate SCSI controller from the system configuratorsection and the desired enclosure, then refer to Appendix D: Cables - Storage Units - Controllers.3. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).4. External cables are not included.Chapter 5. IntelliStation A Pro 6224 45


46 Configuration and Options Guide


Chapter 6. xSeries 206xSeries 206 At-A-GlancePart Number 1, 2Processor Speed/FSB (GHz/MHz) 3Number of Processors (Std/Max)CacheMemory (Std/Max) 4Form FactorHot-Swap (Power, Slots, HDD, Fans)Storage Controller 5Internal HDD InterfaceInternal HDD Storage (Std/Max) 6, 7CD-ROM (IDE)Bays (Total/Avail)Slots (Total/Avail)8482-9Mx 8 2.4/4008 1/1 256KB L2 256MB/4GB Minitower8482-1Mx 2.8/800 1/1 1MB L2 512MB/4GB Minitower8482-1Rx 2.8/800 1/1 1MB L2 512MB/4GB Minitower8482-1Sx 2.8/800 1/1 1MB L2 256MB/4GB Minitower8482-2Mx 3.0/800 1/1 1MB L2 512MB/4GB Minitower8482-2Rx 3.0/800 1/1 1MB L2 512MB/4GB Minitower8482-2Sx 3.0/800 1/1 1MB L2 256MB/4GB Minitower8482-3MY 3.2/800 1/1 1MB L2 512MB/4GB Minitower8482-3RY 3.2/800 1/1 1MB L2 512MB/4GB Minitower8482-3SY 3.2/800 1/1 1MB L2 256MB/4GB Minitower8482-4MY 9 3.2/8009 1/1 1MB L2 512MB/4GB Minitower8482-4RY 9 93.2/800 1/1 1MB L2 512MB/4GB Minitower8482-4SY 9 93.2/800 1/1 1MB L2 256MB/4GB Minitower- SATA Simple-swap 80GB/640GB 48x-20x 7/4 5/5H U320 Hot-swap 0GB/440.4GB 48x-20x 7/5 5/5- U320 Fixed 36.4GB/587.2GB 48x-20x 7/4 5/5- SATA Simple-swap 0GB/640GB 48x-20x 7/5 5/5H U320 Hot-swap 0GB/440.4GB 48x-20x 7/5 5/5- U320 Fixed 36.4GB/587.2GB 48x-20x 7/4 5/5- SATA Simple-swap 0GB/640GB 48x-20x 7/5 5/5H U320 Hot-swap 0GB/440.4GB 48x-20x 7/5 5/5- U320 Fixed 36.4GB/587.2GB 48x-20x 7/5 5/5- SATA Simple-swap 0GB/640GB 48x-20x 7/5 5/5H U320 Hot-swap 0GB/440.4GB 48x-20x 7/5 5/5- U320 Fixed 36.4GB/587.2GB 48x-20x 7/5 5/5- SATA Simple-swap 0GB/640GB 48x-20x 7/5 5/5Note: Model numbers provided are worldwide generally available variant (GAV) model numbers which are not orderable as listedand need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S.orderable part number for 8482-1Mx is 8482-1MU. See the product specific Official IBM announcement letter for other countryspecificGAV model numbers.1. xSeries 206 is housed in a mini-tower mechanical with a rack mount kit available. This system also provides an integrated Intel gigabit Ethernetcontroller (WOL, ASF 2.0), four USB ports (two front/two rear), two RS-232 serial ports, one parallel port, an integrated ATI 7000M videocontroller with 16MB of memory, supports a single 340w power supply, ships with a keyboard and mouse, and includes a one year parts andlabor warranty.2. GAV to MTM mapping for L.A. and A.P. Geographies: 1Mx --> 11X, 1Rx --> 14X, 1Sx --> 15X, 2Mx --> 21X, 2Rx --> 24X, 2Sx --> 25X,9Mx --> 91X, 3MY --> 31X, 3RY --> 34X, 3SY --> 35X, 4MY --> 41X, 4RY --> 44X, 4SY --> 45X. Models 3xX and 4xX will need the last digit (X)substituted with a country-specific designator. For example, Model 34X may become 34L.3. Unless footnoted otherwise, models ship with Intel Pentium 4 processors with advanced transfer L2 cache and 800MHz Front-side Bus (FSB).4. Models with a 3.0GHz CPU or below, ship with PC2700 ECC DDR unbuffered DIMMs. Models with a 3.2GHz CPU ship with PC3200 ECCDDR unbuffered DIMMs.5. Integrated single channel Ultra320 SCSI storage controller on SCSI models, two SATA controllers on SATA models supporting one SATAHDD per controller. Both the SCSI and SATA integrated controllers support Integrated ServeRAID-7e (RAID-0 and RAID-1).6. Maximum capacity for hot-swap SCSI models is based on three 146.8GB hot-swap SCSI HDDs. Maximum capacity for fixed, or nonhot-swap,SCSI models is based on four 146.8GB nonhot-swap SCSI HDDs.7. Maximum storage capacity for SATA models is based on four 160GB SATA HDDs which requires installation of the optionalServeRAID-7t RAID controller and may require replacement of any standard HDD. Standard configuration will support two SATA HDDs.47


8. Intel Celeron processor with 400MHz Front-side Bus (FSB).9. Intel Pentium 4 processor with Extended Memory 64 Technology (EM64T), L2 cache and an 800MHz Front Side Bus (FSB).xSeries 206 Memory OptionsSBBNumberOptionNumberMemory Description 1, 274P5096 06P4053 256MB PC2700 ECC DDR DIMM74P5097 06P4054 512MB PC2700 ECC DDR DIMM74P5098 06P4055 1GB PC2700 ECC DDR DIMM74P5112 06P4049 256MB PC3200 ECC DDR DIMM74P5113 06P4050 512MB PC3200 ECC DDR DIMM74P5114 06P4051 1GB PC3200 ECC DDR DIMMNote: All DIMM options are unbuffered DIMMs.1. A maximum of 4GB of memory is supported via 4 DIMM slots.2. A single DIMM configuration is valid if installed in socket DIMM 1. Otherwise,DIMMs must be configured in matched pairs starting with DIMMsockets 1 and 3, then 2 and 4. Single DIMM models require the standardDIMM either matched or removed, before adding additional memory inpairs. PC2700 and PC3200 DIMMs can coexist in the same system if the memoryconfiguration/installation rules are followed (i.e., matched pairs). However,all memory will operate at the lowest installed speed.Model9Mx, 1Sx, 2Sx1Mx, 1Rx,2Mx, 2Rx3SY, 4SY3MY, 3RY,4MY, 4RYStd. DIMM Configuration1 x 256MB PC2700 ECC DDR DIMM1 x 512MB PC2700 ECC DDR DIMM1 x 256MB PC3200 ECC DDR DIMM1 x 512MB PC3200 ECC DDR DIMM48 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 206 Internal CablingHot-swap SCSI modelsxSeries 206 hot-swap SCSI models are cabled internally with a single, point-to-point (68-pin to SCA-2),nonterminated, 16-bit Ultra320 SCSI cable connecting the SCSI controller to the hot-swap backplane. Thebackplane provides termination for the SCSI bus.Fixed (Nonhot-swap) SCSI ModelsxSeries 206 fixed SCSI models are cabled internally with a single, 4-drop (68-pin), terminated, 16-bitUltra320 SCSI cable, connecting the SCSI controller to installed HDDs.Simple-swap SATASimple-swap SATA models provide two point-to-point SATA cables supporting one SATA HDD each.All models provide a single ATA-100 IDE connector supporting two IDE devices, one device being thestandard optical cabled via a 2-drop IDE cable.xSeries 206 Hard Disk Drive (HDD) and Optical Storage OptionsSBBNumberOptionNumberDescription Height BaysSupported 1MaximumQuantitySimple-swap SATA HDDs 202R8747 73P8002 80GB 7200 rpm Simple-swap SATA HDD SL 6, 7 2 302R8748 73P8003 160GB 7200 rpm Simple-swap SATA HDD SL 6, 7 2 3Fixed (Nonhot-swap) Ultra320 HDDs 232P0753 32P0723 36.4GB 10K rpm Ultra320 SCSI HDD SL 4 ... 7 432P0751 32P0784 36.4GB 15K rpm Ultra320 SCSI HDD SL 4 ... 7 432P0754 32P0724 73.4GB 10K rpm Ultra320 SCSI HDD SL 4 ... 7 432P0752 32P0785 73.4GB 15K rpm Ultra320 SCSI HDD SL 4 ... 7 432P0755 32P0725 146.8GB 10K rpm Ultra320 SCSI HDD SL 4 ... 7 4Hot-swap Ultra320 SCSI HDDs 232P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 5 ... 7 332P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 5 ... 7 332P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 5 ... 7 332P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 5 ... 7 332P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 5 ... 7 3Optical Devices 432P8852 10K3782 48x-20x CD-ROM Black Internal IDE Drive HH 1, 2 290P4239 22P7042 48x/32x/48x Max CD-RW Drive HH 1, 2 2External Storage Expansion Units 5FormFactor- 17331RU EXP400 Storage Expansion Unit Rack (3U)- 09N7296 EXP Rack-to-Tower Conversion Kit -1. May require removing standard devices.2. Mixing of different HDD technologies is not supported.3. Four SATA HDDs are supported with the installation of the optional ServeRAID-7t RAID controller.Chapter 6. xSeries 206 49


4. The xSeries 206 IDE controller supports a maximum of two “parallel” IDE devices (IDE optical drives, IDE tape drives,etc.).5. Not supported by the onboard SCSI controller.Bay Form Factor Height Front Access Usage133mm (5.25in) HH yes Std. Optical1 1 1. Supports removable media devices only. Hard disk drives are12 133mm (5.25in) HH yes Optical/Tape3 89mm (3.5in) SL yes Std. FDD4 89mm (3.5in) SL yes HDD 25 ... 7 89mm (3.5in) SL yes/no 3Std. HDD 4Note: HDDs are installed in the order of bays seven through four,i.e., 7, 6, 5, 4.not supported.2. Bay 4 supports fixed HDDs only.3. Bays six and seven are front-accessible on SATA models, baysfive, six and seven are front-accessible on hot-swap models andbays five, six and seven are not front-accessible on nonhot-swapmodels.4. Standard HDD on nonopen-bay models is installed in bay seven.50 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 206 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCISupport 1SlotsSupportedStorage Controllers 102R0966 02R0988 ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz02R0995 32P0033 ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz13N2194 13N2190 ServeRAID-6i+ Controller Half 64-bit/133MHz1, 21, 2124P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit/66MHz 1 ... 571P8614 71P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz1 ... 571P8651 71P8648 ServeRAID-7t SATA RAID Controller Half 64-bit/66MHz 1 ... 524P2650 19K4646 PCI Wide Ultra160 SCSI Adapter Half 64-bit/66MHz 1 ... 5Fibre Storage Controllers and Options 2- 3534F08 TotalStorage SAN Switch F08, 8-port - - -- 2109F16 SAN Fibre Channel Switch, 16-port - - -Networking 325P2889 06P3601 10/100 Ethernet Server Adapter Half 32-bit/33MHz 1 ... 531P9605 31P9601 PRO/1000 MT Server Ethernet Adapter by Intel Half 64-bit/133MHz1 ... 5System Management02R1676 59P2984 Remote Supervisor Adapter II Half 32-bit/33MHz 2Point of Sale (POS)- 08L2683 PCI Store Loop Adapter 4- - 1 ... 5- 08L2684 PCI NVRAM Adapter 4 - - 1 ... 51. xSeries 206 SCSI models ship with single channel, Ultra320 SCSI Controller installed in a dedicated mini-PCI slot. SATA models ship withtwo integrated SATA controllers. Both the SCSI and SATA controllers support Integrated ServeRAID-7e (RAID-0 and RAID-1).2. See Fibre Channel Solutions Overview section for additional configuration information.3. xSeries 206 includes an integrated copper-based, full-duplex, Intel gigabit Ethernet controller.4. The PCI Store Loop adapter contains NVRAM which is required to run the 4690 OS system. POS solutions implemented via Ethernet use thePCI NVRAM adapter to provide NVRAM.Chapter 6. xSeries 206 51


Slot 1: Bus 03, 66MHz, 64-bit, full length, 3.3v, PCI-XSlot 2: Bus 03, 66MHz, 64-bit, full length, 3.3v, PCI-XSlot 3: Bus 04, 33MHz, 32-bit, full length, 5v, PCISlot 4: Bus 04, 33MHz, 32-bit, full length, 5v, PCISlot 5: Bus 04, 33MHz, 32-bit, full length, 5v, PCIxSeries 206 Power and AccessoriesOption NumberDescriptionPower 1Tower Uninterruptible Power Supply (UPS) 221301TX21302TX21303TX21304TX21305TX21306TXUPS750TLVUPS750THVUPS1000TLVUPS1000THVUPS1500TLVUPS1500THVRack-mount Uninterruptible Power Supply (UPS) 232P102032P10222130R302130R31APC 2U Smart-UPS 1400RMBAPC 2U Smart-UPS 1400RMiBUPS3000XLVUPS3000XHV37L6861 APC Smart-UPS 500032P1692UPS Extend Run Battery Pack1. The xSeries 206 includes a 340w voltage sensing power supply with a single line cord.2. For runtimes and UPS attributes, see Appendix C: UPS Runtime Estimate.52 Configuration and Options Guide


Refer to the Important Notices section for important noticesSBBNumberOptionNumberDescriptionRack/Tower Conversion Kits- 09N4300 4Ux20D Tower-to-Rack KitRack Console Connectivity 1- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 2x8 Console SwitchMonitors- 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 2- 63324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black 2- 6636AB1 ThinkVision L150 15in LCD Flat Panel Monitor, (381mm, 15in viewable image), businessblack- 17231UX 1U Flat Panel Monitor Console Kit (with US Space Travel keyboard) 3- 17231NX 1U Flat Panel Monitor Console Kit (without keyboard) 3- 32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 4- 32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 432P8917 28L3644 Space Saver II Keyboard 6Keyboard and Mouse 502R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys business black 702R3421 28L3673 Sleek 2-button Mouse, business black13M7124 06P4069 USB Optical Wheel MouseNote: Refer to the Rack Console Options section for information concerning IBM racks and rack-supporteddevices.1. Refer to the Rack console Options section for information regarding console connectivity using these options.2. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).3. Includes a 17in Flat Panel Monitor.4. Includes a 15in Flat Panel Monitor.5. Includes a 15in Flat Panel Monitor.6. Installation within a rack requires an optional keyboard tray (P/N 28L4707) or a monitor console kit.7. Installation within a rack requires an optional keyboard tray (P/N 28:4707). This keyboard cannot share a keyboardtray with a flat panel display.Chapter 6. xSeries 206 53


xSeries 206 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupportedSCSIInterfaceForm FactorExt TapeEnclosures 132P8861 00N7991 20/40GB DDS/4 4mm Internal Tape Drive 2 Ultra2(16-bit)71P9176 71P9145 36/72GB DDS/5 Internal SCSI Tape Drive 2 Ultra2(16-bit)- 59P6745 80/160GB VS160 SCSI Tape Drive 2 Ultra160(16-bit)89mm (3.5in) HH or133mm (5.25in) HH89mm (3.5in) HH or133mm (5.25in) HH89mm (3.5in) HH or133mm (5.25in) HH35100303510030351003071P9166 59P6746 80/160GB VXA-2 SCSI Tape Drive 2 Ultra2(16-bit)- 59P6717 100/200GB LTO Tape Drive 2 Ultra2(16-bit)133mm (5.25in) HH 3510030133mm (5.25in) HH -Tape Autoloaders- 18P9133 TotalStorage Ultrium LVD Tape Drive 3580 ModelL23- Ultra160(16-bit)Stand-alone or5U Rack 2-External Tape Enclosures- 3510020 External Half-High SCSI Storage Enclosure 3, 4- Ultra2(16-bit)Desktop -- 3510030 External Half High SCSI Storage Enclosure withoutpower cord 3, 4 - Ultra2(16-bit)Desktop -External Tape Libraries 5- 18P9212 TotalStorage Ultrium LVD Tape Library 3582- Ultra160Model L23 4 (16-bit)Stand-alone or4U Rack 6-- 18P9337 TotalStorage Ultrium Fibre Tape Library 3582- 2Gb FibreModel F23 4 ChannelStand-alone or4U Rack 6 -Associated Options- 00N7956 68-pin External Multimode LVD/SE SCSITerminator- LVD/SE(16-bit)External 3510020Note: Hot-swap models do not support installation of a SCSI tape drive on the same bus that supports the hot-swap backplane. Thestandard SCSI controller can be used if an optional RAID controller is installed for the HDDs. SATA models will require an optionalSCSI controller to support SCSI tape drives.Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. To determine external cable requirements, note the tape drive's SCSI interface, the appropriate SCSI controller from the system configurator sectionand the desired enclosure, then refer to Appendix D: Cables - Storage Units - Controllers.2. Rack mount requires an optional rack kit. See tape drive appendix for more information.3. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).4. External cables are not included.5. Tape library attributes and options are located in the tape library appendix.6. Rack-mount kit is standard. Stand-alone kit is optional. See tape drive appendix for more information and options.54 Configuration and Options Guide


Chapter 7. xSeries 225xSeries 225 At-A-GlancePart Number 1Processor Speed/FSB (GHz/MHz) 2Number of Processors (Std/Max)CacheMemory (Std/Max) 3Form FactorPower Supply Quantity (Std/Max)Hot-Swap (Power, Slots, HDD, Fans)Redundancy (Optional, Standard) 4System Management ProcessorsOnboard Ethernet 5Storage Controller 6Removable Media Bays (Total/Avail)Internal HDD Storage (Std/Max) 7CD-ROM (IDE)Bays (Total/Avail)Slots (Total/Avail)8649-42X 2.67/533 1/2 512KB L2 512MB/8GBTower 1/1 - - N 1Gb DualU3203/1 36.4GB/587.2GB48x-20x 7/4 5/58649-4AX 2.67/533 1/2 512KB L2 512MB/8GBTower 1/1 H - N 1Gb DualU3203/1 0/880.8GB 48x-20x 9/7 5/58649-4BX 2.67/533 1/2 512KB L2 512MB/8GBTower 2/2 P, H S-PowerN 1Gb DualU3203/1 0/880.8GB 48x-20x 9/7 5/58649-52X 2.8/533 1/2 512KB L2 512MB/8GBTower 1/1 - - N 1Gb DualU3203/1 36.4GB/587.2GB48x-20x 7/4 5/58649-5AX 2.8/533 1/2 512KB L2 512MB/8GBTower 1/1 H - N 1Gb DualU3203/1 0/880.8GB 48x-20x 9/7 5/58649-5BX 2.8/533 1/2 512KB L2 512MB/8GBTower 2/2 P, H S-PowerN 1Gb DualU3203/1 0/880.8GB 48x-20x 9/7 5/58649-62X 3.06/533 1/2 512KB L2 512MB/8GBTower 1/1 - - N 1Gb DualU3203/1 36.4GB/587.2GB48x-20x 7/4 5/58649-6AX 3.06/533 1/2 512KB L2 512MB/8GBTower 1/1 H - N 1Gb DualU3203/1 0/880.8GB 48x-20x 9/7 5/58649-6BX 3.06/533 1/2 512KB L2 512MB/8GBTower 2/2 P, H S-PowerN 1Gb DualU3203/1 0/880.8GB 48x-20x 9/7 5/51. xSeries 225 ships with standard keyboard and mouse. See Power and Accessories section for tower-to-rack conversion kit and other accessories.2. Intel Xeon processor with advanced transfer L2 cache and 533MHz (quad-pumped) access to memory and I/O buses.3. High-speed, two-way interleaved 133MHz DDR PC2100 RDIMM. Maximum capacity includes four 2GB RDIMMs, requiring replacement of thetwo standard RDIMMs.4. Nonredundant power models include a single 425w nonhot-swap power supply. Redundant power models include two 514w power supplies.Each power supply includes a separate power cord.5. A Broadcom 5703 copper gigabit Ethernet controller is integrated into the planar.6. The dual-channel, Ultra320 integrated controller supports both Ultra160 and Ultra320 HDDs, but the entire SCSI bus will default to the slowerrate (MB/second) if HDDs of different technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocated for mirroringif a RAID adapter is not installed. One additional HDD may be designated as a hot-spare for HDDs configured in the onboard mirror. Mirroredand hot-spare HDDs must be matched.7. Maximum storage capacity is based on four 146.8GB nonhot-swap Ultra320 HDDs in nonhot-swap models and six 146.8GB hot-swap Ultra320HDDs in hot-swap models.xSeries 225 Processor OptionsSBB Number Option Number Processor Upgrades SMP Support 190P4215 24P7861 2.67GHz/533MHz-512KB L2 Cache XeonProcessor90P4216 24P8054 2.8GHz/533MHz-512KB L2 Cache XeonProcessor90P4212 24P8122 3.06GHz/533MHz-512KB L2 Cache XeonProcessor4xX5xX6xX55


xSeries 225 Memory Options1. One additional processor may be installed, providing a maximum of two. All processors must be identical intype, speed and cacheSBBNumberOptionNumberMemory Description 1, 273P2876 373P2868 3 512MB DDR PC2100 ECC RDIMM Kit 337L3538 33L5038 512MB DDR PC2100 ECC RDIMM33P3126 33L5039 1GB DDR PC2100 ECC RDIMM32P9223 33L5040 2GB PC2100 CL2.5 ECC DDR SDRAM RDIMM1. Due to two-way interleaving, installation of memory options in matched pairsbeginning with DIMMs three and four is required. Standard DIMMs are installedin sockets three and four.2. Chipkill is available in 512MB DIMMs and above. Installation of a non-ChipkillDIMM will disable all Chipkill function.3. The 512MB kit option contains two 256MB non-Chipkill DIMMs, whereas theSBB contains a single DIMM.CPU 1CPU 2RDIMM 1RDIMM 2RDIMM 3RDIMM 4Top view of x225 vertical planarxSeries 225 Internal SCSI CablingxSeries 225 nonhot-swap models are cabled internally with a four-drop, 16-bit wide Ultra320 SCSI cablewith a built-in active terminator at one end of the cable. The other end of the cable is attached to the internal68-pin connector of channel A of the integrated Ultra320 SCSI controller. SCSI HDDs can be connected toany of the four cable connectors.xSeries 225 hot-swap models are cabled internally with a single-drop, nonterminated 16-bit wide Ultra320SCSI cable. One end is connected to the internal 68-pin connector of channel A of the integrated Ultra320SCSI controller and the other end to the hot-swap backplane, which provides termination for the SCSI bus.In addition to the SCSI controller, an IDE controller provides the interface for the IDE CD-ROM drive. Atwo-drop IDE cable connects the IDE controller to the IDE CD-ROM. The second drop can be used toconnect a second optional IDE device.56 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 225 Hard Disk Drive (HDD) and Optical Storage OptionsSBBNumberOptionNumberDescription Height BaysSupported 1MaximumQuantity 2Nonhot-swap Ultra320 HDDs 132P0753 32P0723 36.4GB 10K rpm Ultra320 SCSI HDD SL 1 ... 4 432P0754 32P0724 73.4GB 10K rpm Ultra320 SCSI HDD SL 1 ... 4 432P0755 32P0725 146.8GB 10K rpm Ultra320 SCSI HDD SL 1 ... 4 432P0751 32P0784 36.4GB 15K rpm Ultra320 SCSI HDD SL 1 ... 4 432P0752 32P0785 73.4GB 15K rpm Ultra320 SCSI HDD SL 1 ... 4 4Hot-swap Ultra160 HDDs 132P9018 06P5755 36.4GB 10K rpm Ultra160 SCSI Hot-swap HDD SL 1 ... 6 632P9011 06P5756 73.4GB 10K rpm Ultra160 SCSI Hot-swap HDD SL 1 ... 6 632P9025 06P5768 36.4GB 15K rpm Ultra160 SCSI Hot-swap HDD SL 1 ... 6 632P0749 32P0750 146.8GB 10K rpm Ultra160 SCSI Hot-swap HDD SL 1 ... 6 6Hot-swap Ultra320 HDDs 132P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 632P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 632P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 632P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 632P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 6Associated Options33P3129 32P8164 External SCSI Interface Kit 3Optical Devices 4- - 1BaysSupported71P8149 10K3782 48x-20x CD-ROM Black Internal IDE Drive A, B02R3278 22P6950 16x Max RAM-Read DVD-ROM Drive 5 A, BExternal Storage Expansion Units 6Form Factor- 17331RU 7EXP400 Storage Expansion Unit Rack (3U)- 09N7296 EXP Rack-to-Tower Conversion Kit 8 -- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)- 174290U FAStT900 Storage Server Rack (4U)- 172260U FAStT600 Storage Server (US line cord, Englishpubs)Rack (3U)- 35421RU 9FAStT200 Storage Server Rack (3U)- 35422RU FAStT200 HA Storage Server Rack (3U)- 19K1121 FAStT200 Redundant RAID Controller -Note: The integrated Ultra320 SCSI controller supports both Ultra320 and Ultra160 HDDs, but if mixed on the same bus,bus speed is limited to the lower rated performance.1. Nonhot-swap HDDs are not supported in hot-swap models. Hot-swap HDDs are not supported in nonhot-swap models.2. When integrated mirroring is enabled, the maximum quantity of HDDs supported is three (two mirrored and one hot-spare).3. Required to enable 0.8mm VHDCI external connector for external SCSI attachment to the second channel of the integrated controler.Refer to Appendix D: Cables - Storage Units - Controllers for additional information.4. Standard optical drive is installed in Bay 1.Chapter 7. xSeries 225 57


5. Audio not supported for DVD-ROM drives. The drive provides data input/output only.6. To configure a SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllersto confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD orother expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre ChannelSolutions Overview section.7. To attach EXP400 to the integrated controller when ServeRAID-6i+ is installed, External SCSI Interface Kit is required to enablea 0.8mm VHDCI external connector on the system chassis.8. To convert an EXP Storage Unit to a tower form factor the EXP Rack-to-Tower Conversion Kit is required.9. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller(P/N 19K1121).Bay Form Factor Height Front Access UsageA 133mm (5.25in) HH yes CD-ROMB 133mm (5.25in) HH yes open 1C 89mm (3.5in) SL yes FDD1 ... 6 89mm (3.5in) SL yes openNote: HDDs are installed in the order of bays six through one.The boot disk must be installed in bay six.1. Supports removable media devices only. Hard disk drives arenot supported.CD-ROMRemovablemediaFDDBay 1Bay 2Bay 3Bay 4Bay 5Bay 6xSeries 225 front view (hot-swap)Bay Form Factor Height FrontAccessUsageA 133mm (5.25in) HH yes CD-ROMB 133mm (5.25in) HH yes open 1C 89mm (3.5in) SL yes FDD2 ... 4 89mm (3.5in) SL no open 21 89mm (3.5in) SL no HDD 2Note: HDDs are installed in the order of bays one throughfour. The boot disk must be installed in bay one.1. Supports removable media devices only. Hard disk drivesare not supported.2. HDD bays are not front-accessible in nonhot-swap models.58 Configuration and Options Guide


Refer to the Important Notices section for important noticesCD-ROMRemovablemediaFDDBay 4Bay 3Bay 2Bay 1xSeries 225 front view (nonhot-swap)Chapter 7. xSeries 225 59


xSeries 225 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCI Support 1SlotsSupportedHot-PlugCapable 2Storage Controllers 3, 402R0996 02R0988 ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz 2 ... 4 5-02R0995 32P0033 ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 2 ... 4 5 -- 13N2190 ServeRAID-6i+ Controller Half 64-bit/133MHz 4 -24P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit/66MHz 2 ... 5 5 -24P2650 19K4646 PCI Wide Ultra160 SCSI Adapter Half 64-bit/66MHz 1 ... 5 -71P8614 71P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz 2 ... 5 -Internal RAID Cable02R2046 02R2068 Ultra320 Internal Single-drop 24in LVD SCSI Cable 5 - - - -Fibre Storage Controllers and Options 624P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 2 ... 5 -- 17421RU FAStT700 Fibre Channel Storage Server - - - -- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 2034212 McDATA Sphereon 4300 Fabric Switch Model 212 - - - -- 3534F08 TotalStorage SAN Switch F08, 8-port - - - -- 2109F16 SAN Fibre Channel Switch, 16-Port - - - -Networking 725P2889 06P3601 10/100 Ethernet Server Adapter 8Half 32-bit/33MHz 1 ... 5 -31P9605 31P9601 PRO/1000 MT Server Ethernet Adapter by Intel Half 64-bit/133MHz 1 ... 5 -32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit/133MHz 2 ... 5 -31P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) 8 Half 64-bit/133MHz 2 ... 4 -32P9298 31P6401 NetXtreme 1000 T Dual Port Ethernet AdapterHalf 64-bit/133MHz 2 ... 5 -(copper) 8Communications 932P8862 33L4618 10V.90 PCI Data/Fax Modem Half 32-bit/33MHz 1 -System Management02R1676 59P2984 Remote Supervisor Adapter II11 Half 32-bit/33MHz 1 -1. A 32-bit adapter installed into a 64-bit slot will restrict the data transfer rate to 32-bit. Adapters rated at 66MHz will operate at 33MHz wheninstalled in a 33MHz slot. 33MHz adapters will reduce 100MHz buses to 33MHz. 133MHz PCI-X adapters are backward compatible with33/66MHz, 64-bit PCI-based servers, but will only operate at the rated bus frequency or frequency of the slowest adapter in the bus in which itis installed. 64-bit adapters are not supported in slot one.2. xSeries 225 does not support hot-plug PCI slots.3. The dual-channel, Ultra320 integrated controller supports both Ultra160 and Ultra320 HDDs, but the entire SCSI bus will default to the slowerrate (MB/second) if HDDs of different technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocated for mirroringif a RAID adapter is not installed. One additional HDD may be designated as a hot-spare for HDDs configured in the onboard mirror. Mirroredand hot-spare HDDs must be matched.4. xSeries 225 includes a dual-channel Ultra320 SCSI controller with two internal connectors. An external high density 68-pin connector can beenabled using optional External SCSI Interface Kit (P/N 32P8164) to connect channel B to an external SCSI connector. External connection usingthis option and the external knockout is not supported if both channels of the integrated controller are connected internally, in which case a supportedPCI SCSI controller is required to support an external SCSI device.5. ServeRAID-6M and ServeRAID-4Lx installations in slots 3-5 on hot-swap models for internal HDDs, require cable option 02R2068.6. See Fibre Channel Solutions Overview section for additional configuration information.7. The integrated copper 10/100/1000Mbps Broadcom (BCM5703) single-port Ethernet controller supports Wake on LAN.8. The Wake on LAN (WoL) function provided by this Ethernet PCI adapter is supported in this system.60 Configuration and Options Guide


Refer to the Important Notices section for important notices9. xSeries 225 includes four USB ports (two each on front and rear of the chassis), two nine-pin serial ports, one 25-pin parallel port, audio in/outjacks and a microphone in jack.10. Due to homologation variances, modem availability may differ by country.11. Connect the 20-pin ribbon cable provided with the option between the planar connector and the adapter. Connection of the external AC powersupply provided with RSA is required.AGP slotPCI slot 1PCI slot 2PCI slot 3PCI slot 4PCI slot 5xSeries 225 rear viewSlot 1: Bus C, 32-bit, 33MHz, 5v, half-lengthSlot 2: Bus A, 64-bit, 100MHz, 3.3v, full-length, PCI-XSlot 3: Bus A, 64-bit, 100MHz, 3.3v, full-length, PCI-XSlot 4: Bus B, 64-bit, 100MHz, 3.3v, full-length, PCI-XSlot 5: Bus B, 64-bit, 100MHz, 3.3v, full-length, PCI-XChapter 7. xSeries 225 61


xSeries 225 Power and AccessoriesPart NumberDescriptionPower 1Tower Uninterruptible Power Supply (UPS) 221301TX21302TX21303TX21304TX21305TX21306TXUPS750TLVUPS750THVUPS1000TLVUPS1000THVUPS1500TLVUPS1500THVRack Mount Uninterruptible Power Supply (UPS) 232P1020APC 2U Smart-UPS 1400RMB2130R30 UPS3000XLV 32130R31 UPS3000XHV 332P1692 UPS Extend Run Battery Pack 337L6861 APC Smart-UPS 5000RMB 4Monitors 517231UX 1U Flat Panel Monitor Console Kit (with US Space Travel keyboard) 617231NX 1U Flat Panel Monitor Console Kit (without keyboard) 66636AB16636HB167634HB0L150 ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image), business blackL150p ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image), business blackL170p ThinkVision 17in LCD Flat Panel Monitor (432mm, 17in viewable image), business black1. Nonredundant power models include a single 425w nonhot-swap power supply. Redundant power models include two 514wpower supplies. Each power supply includes a 6ft NEMA 5-15P power cord.2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.3. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.4. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.5. xSeries 225 uses an integrated ATI Rage XL video controller with 8MB of memory.6. Includes a 17in Flat Panel Monitor.62 Configuration and Options Guide


Refer to the Important Notices section for important noticesSBB Number Option Number DescriptionConversion Kits- 59P4817 4U Extended Depth Tower to Rack Conversion Kit- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion Option- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 1x4 Console Switch32P8917 28L3644 Space Saver II Keyboard 5, 6Rack and NetBAY 1Refer to the Rack Cabinets and Options section for information concerning IBM racks andrack-supported devices.Console Connectivity 2, 3Keyboard and Mouse 402R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys business black 702R3421 28L3673 Sleek 2-Button Mouse, business black1. Rack installation of xSeries 225 requires 4U Extended Depth Tower to Rack Conversion Kit (P/N 49P4817) and one of the rackslisted in the Rack Cabinets and Options section.2. Refer to the Rack Console Options section for information regarding console connectivity using these options.3. USB accessories are not compatible with the NetBay console switches. They attach to a single USB-capable server.4. The xSeries 225 includes both a mouse and nonspace saver keyboard.5. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in ready-to-use position, or NetBAY 2UFlat Panel Monitor Console Kit. Standard with 2U NetBAY console kits.6. Advanced TrackPoint IV features are not available on IBM xSeries systems.7. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with aflat panel display.Chapter 7. xSeries 225 63


xSeries 225 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupportedStorageInterfaceForm FactorExt TapeEnclosures 149P3228 48P7042 20/40GB TR7 Internal IDE Tape Drive 2 Std. IDE 89mm (3.5in) SL or133mm (5.25in) HH-32P8861 00N7991 20/40GB DDS/4 4mm Internal Tape Drive 2 Ultra2(16-bit)71P9176 71P9145 36/72GB DDS/5 Internal SCSI Tape Drive 2 Ultra2(16-bit)89mm (3.5in) HH or133mm (5.25in) HH89mm (3.5in) HH or133mm (5.25in) HH35100200034B0X35100200034B0X71P9166 59P6746 80/160GB VXA-2 SCSI Tape Drive 2 Ultra2(16-bit)133mm (5.25in) HH 35100200034B0X- 59P6717 100/200GB LTO Tape Drive 2 Ultra2(16-bit)133mm (5.25in) HH0034B0X- 59P6719 40/80GB DLT VS80 Internal SCSI TapeDrive2 Ultra2(16-bit)133mm (5.25in) HH 35100200034B0X49P3225 00N8016 100/200GB LTO Tape Drive - Ultra2(16-bit)24P7303 59P6736 160/320GB SDLT SCSI Tape Drive Option - Ultra2(16-bit)71P9165 59P6744 200/400GB LTO Full-High Tape Drive - Ultra2(16-bit)Tape Autoloaders133mm (5.25in) FH133mm (5.25in) FH133mm (5.25in) FH0034B0X0034B0X0034B0X- 360716X 3607 Series 1760GB/3.5TB SDLTpro TapeAutoloader- Ultra2(16-bit)2U Rack -- 18P9133 TotalStorage Ultrium LVD Tape Drive 3580Model L23- Ultra160(16-bit)Stand-alone or5U Rack 2-External Tape Enclosures- 0034B0X NetBAY Tape Enclosure (Rack Mount) 3- 3510020 External Half-High SCSI StorageEnclosure 3, 4- Ultra2(16-bit)- LVD(16-bit)4U Rack -Desktop -- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160(16-bit)1U Rack -Associated Options- 00N7956 68-pin External Multimedia LVD/SE SCSITerminator33P3129 32P8164 External SCSI Interface Kit 5- LVD/SE(16-bit)- LVD(16-bit)External 3510020Internal -Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. To determine external cable requirements, note the tape drive's SCSI interface, the appropriate SCSI controller from the system configuratorsection and the desired enclosure, then refer to Appendix D: Cables - Storage Units - Controllers.2. Rack mount requires an optional rack kit. See tape drive appendix for more information.3. External cables are not included.4. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).5. Required to enable a 0.8mm VHDCI external connector for external SCSI attachment to the second channel of the integrated controller.64 Configuration and Options Guide


Chapter 8. xSeries 226xSeries 226 At-A-GlancePart Number 1CPU/FSB Speed (GHz/MHz) - Cache 2Number of Processors (Std/Max)Memory (Std/Max) 3Form Factor 4Power Supply Quantity (Std/Max) 5Hot-swap (Power, Slots, HDD, Fans)System Management ProcessorIntegrated Ethernet 6Storage Controller 7Internal HDD InterfaceInternal HDD Storage (Std/Max) 8, 9Optical DriveBays (Total/Avail)Slots (Total/Avail)8648-00Y 2.8/8001MB L21/2 512MB/8GB Tower 1/1 - N 1GB SATA Simpleswap80GB/1000GBCD-ROM(48x-20x)7/5 6/68648-0AY 2.8/8001MB L28648-0BY 2.8/8001MB L21/2 512MB/8GB Tower 1/1 H N 1GB Dual U320 Hot-swap 0/880.8GB CD-ROM(48x-20x)1/2 512MB/8GB Tower 2/2 P, H N 1GB Dual U320 Hot-swap 0/880.8GB CD-ROM(48x-20x)9/7 6/69/7 6/68648-10Y 3.0/8001MB L21/2 512MB/8GB Tower 1/1 - N 1GB SATA Simpleswap80GB/1000GBCD-ROM(48x-20x)7/5 6/68648-1AY 3.0/8001MB L28648-1BY 3.0/8001MB L21/2 512MB/8GB Tower 1/1 H N 1GB Dual U320 Hot-swap 0/880.8GB CD-ROM(48x-20x)1/2 512MB/8GB Tower 2/2 P, H N 1GB Dual U320 Hot-swap 0/880.8GB CD-ROM(48x-20x)9/7 6/69/7 6/68648-20Y 3.2/8001MB L21/2 512MB/8GB Tower 1/1 - N 1GB SATA Simpleswap80GB/1000GBCD-ROM(48x-20x)7/5 6/68648-2AY 3.2/8001MB L28648-2BY 3.2/8001MB L21/2 512MB/8GB Tower 1/1 H N 1GB Dual U320 Hot-swap 0/880.8GB CD-ROM(48x-20x)1/2 512MB/8GB Tower 2/2 P, H N 1GB Dual U320 Hot-swap 0/880.8GB CD-ROM(48x-20x)9/7 6/69/7 6/6Note: xSeries 226 also provides four USB ports (two front, two rear), two 9-pin serial ports, one 25-pin parallel port, keyboard port,mouse port, video port and an integrated ATI Radeon 7000M graphics controller with 16 MB of video memory. A keyboard and mouse isalso provided.1. Model numbers provided are worldwide generally available variant (GAV) model numbers which are not orderable as listed and need to be modifiedby country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8648-00Y is8648-00U. See the product specific Official IBM announcement letter for other country-specific GAV model numbers. GAV to MTM mapping for L.A.and A.P. Geographies follow the same pattern. Substitute the last character with a country-specific designator.2. Intel Xeon processor with Extended Memory 64 Technology (EM64T), L2 cache and an 800MHz (quad-pumped) Front Side Bus (FSB).3. High-speed, two-way interleaved PC2-3200 RDIMMs. Maximum capacity requires replacing the standard DIMMs. x226 will support 16GB of memoryif/when a supported 4GB DIMM becomes available.4. A 4U tower-to-rack conversion kit is available. See ‘Power and Accessories.’5. See ‘Power and Accessories’ section for more information on the power supplies.6. Broadcom 5721 copper gigabit Ethernet controller with Wake-on-LAN support.7. Integrated dual-channel Ultra320 SCSI storage controller on SCSI models, two SATA controllers on SATA models supporting one SATA HDD percontroller. Both the SCSI and SATA integrated controllers support Integrated ServeRAID-7e (RAID-0 and RAID-1).8. Maximum storage capacity for SATA models is based on four 250GB SATA HDDs which requires installation of the optional ServeRAID-7t controllerand replacement of the standard HDD. Standard configuration will support two SATA HDDs.9. Maximum storage capacity for hot-swap SCSI models is based on six 146.8GB hot-swap HDDs.65


xSeries 226 Processor OptionsSBB NumberOptionNumberProcessor Options SMP Support 1xSeries 226 Memory Options13N1622 13N0671 2.8GHz/800MHz-1MB L2 Cache Xeon Processor 0xY13N1431 13N0672 3.0GHz/800MHz 1MB L2 Cache, Xeon Processor 1xY13N1432 13N0673 3.2GHz/800MHz 1MB L2 Cache, Xeon Processor 2xYNote: x226 processor options support Intel’s Extended Memory 64 Technology (EM64T).1. One additional processor may be installed, providing a maximum of two. All processors must be identical intype, speed and cache size.SBBNumber 1OptionNumberMemory Options90P0870 73P3523 512MB (2x256MB) PC2-3200 ECC DDR2 RDIMM Kit90P1218 73P3522 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit73P2873 73P2865 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit 273P2874 73P2866 2GB (2x1GB) PC2-3200 ECC DDR2 RDIMM Kt 273P2875 73P2867 4GB (2x2GB) PC2-3200 ECC DDR2 RDIMM Kit 2, 3Note: 8GB of memory is supported via six DIMM slots with currently available options.x226 will support 16GB of memory if/when a supported 4GB DIMM becomes available.Due to two-way interleaving, installation of memory DIMMs in matched pairs is requiredbeginning with DIMM slots 1 and 2, then 3 and 4, then 5 and 6.1. Quantity two of each SBB PN must be ordered to equal its corresponding option.2. Supports Chipkill. Mixing Chipkill DIMMs with nonChipkill DIMMs will disable Chipkillfunction.3. 2GB DIMMs can only be installed in slots 1, 2, 3 and 4. If mixing 2GB DIMMs with other sizeDIMMs, only two 2GB DIMMs can be installed and they must be installed in slots 1 and 2.ModelAllStd. DIMM Configuration2 x 256MB PC2-3200 ECC DDR2 RDIMM (nonChipkill)66 Configuration and Options Guide


Refer to the Important Notices section for important noticesSlot 3 PCISlot 2 PCISlot 4 PCI-XSlot 1 PCISlot 5 PCI-XExpress x 16Slot 6 PCI-XDIMM 4DIMM 5DIMM 6DIMM 3DIMM 2DIMM 1Battery Microprocessor 2Microprocessor 1Remote SupervisorAdapter IIMicroprocessor 2 VRMxSeries 226 System BoardxSeries 226 Internal CablingHot-swap SCSI modelsxSeries 226 hot-swap SCSI models are cabled internally with a single, 1-drop LVD SCSI cable, connectingone channel of the integrated, dual-channel Ultra320 SCSI controller to the hot-swap backplane.Simple-swap SATAxSeries 226 simple-swap SATA models provide two point-to-point SATA cables connecting the twointegrated SATA controllers to the SATA simple-swap backplane.All models provide a single ATA-100 IDE connector supporting two IDE devices, one device being thestandard optical cabled via a 2-drop IDE cable.An optional SCSI cable is available to connect the second SCSI channel to the back of the chassis, enablingan external 0.8mm VHDCI SCSI connector.Chapter 8. xSeries 226 67


xSeries 226 Hard Disk Drive (HDD) and Optical Storage OptionsSBB NumberOptionNumberDescription Height Bays Supported 1Max Qty 2Simple-swap SATA HDDs 390P1398 73P8002 80GB 7200 rpm Simple-swap SATA HDD SL 4 ... 7 490P1399 73P8003 160GB 7200 rpm Simple-swap SATA HDD SL 4 ... 7 4- 73P8006 250GB 7200 rpm Simple-swap SATA HDD SL 4 ... 7 4Hot-swap Ultra320 HDDs 332P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 4 ... 9 632P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 4 ... 9 632P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 4 ... 9 632P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 4 ... 9 632P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swapHDDSL 4 ... 9 6Associated Options24P7970 24P7973 Ultra320 External SCSI Interface Kit 4- - 1Optical Devices32P8852 10K3782 48x-20x CD-ROM Black Internal IDE Drive HH 1, 2 290P4239 22P7042 48X/32X/48X Max CD-RW Drive HH 1, 2 226K8792 73P3300 48X/32X/48X/16X Max CD-RW/DVD-ROMCombination DriveHH 1, 2 202R3278 22P6950 16X Max RAM-Read DVD-ROM Drive HH 1, 2 226K8793 73P3305 Multi-Burner Plus HH 1, 2 2External Storage Expansion Units 5Form Factor- 17331RU EXP400 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 1724100 FAStT100 Storage Server Rack (3U)- 172260U FAStT600 Storage Server Rack (3U)- 17226LU FAStT600 Entry Storage Server Rack (3U)1. May require removing standard devices.2. Four SATA HDDs are supported within the installation of the optional ServeRAID-7t controller. Two HDDs are supported in the standard configuration.3. Mixing SATA and SCSI HDDs is not supported.4. Required to enable a 0.8mm VHDCI external SCSI connector. Connects to the second channel of the integrated SCSI controller. Installs in the rearPCI slot knockout for either slot 2 or slot 3, preventing use of that particular slot.5. FAStT options require an optional Fibre controller be installed in the system.68 Configuration and Options Guide


Refer to the Important Notices section for important noticesBay Form Factor Height Front Access Usage1 133mm (5.25in) HH Yes Std. Optical2 133mm (5.25in) HH Yes Optical/Tape3 89mm (3.5in) SL Yes Std. FDD4 89mm (3.5in) SL Yes HDD5 89mm (3.5in) SL Yes HDD6 89mm (3.5in) SL Yes HDD7 89mm (3.5in) SL Yes Std. HDD 18 289mm (3.5in) SL Yes HDD9 2 89mm (3.5in) SL Yes Std. HDD 11. Standard HDD is installed in bay 7 on SATA models; bay 9 on SCSI models.2. Bays 8 and 9 are available on SCSI models only.Bay 1Bay 2Bay 3xSeries 226 front viewBay 4Bay 5Bay 6Bay 7Bay 8Bay 9Chapter 8. xSeries 226 69


xSeries 226 I/O OptionsPower cordMouseKeyboardParallelSerial 1VideoUSB 1USB 2EthernetSerial 2PCI Slots 1 - 6Slot 1: Bus PCI Express, 32-bit, 33MHz, 5v, PCI Express, half-lengthSlot 2: Bus PCI, 32-bit, 33MHz, 5v, PCI, half-lengthSlot 3: Bus PCI, 32-bit, 33MHz, 5v, PCI, full-lengthSlot 4: Bus PCI-X Channel B, 64-bit, 133 MHz, 3.3v, PCI-X, full-lengthSlot 5: Bus PCI-X Channel A, 64-bit, 100MHz, 3.3v, PCI-X, full-lengthSlot 6: Bus PCI-X Channel A, 64-bit, 100MHz, 3.3v, PCI-X, full-lengthx226 rear view70 Configuration and Options Guide


Refer to the Important Notices section for important noticesSBB NumberOptionNumberDescriptionAdapterLengthPCI SupportSlotsSupportedHot-PlugCapable 1Storage Controllers 202R0996 02R0988 ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz 4 ... 6 -02R0995 32P0033 ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 4 ... 6 -13N2194 13N2190 ServeRAID-6i+ Controller Half 64-bit/133MHz 5 -- 71P8648 ServeRAID-7t SATA Controller Half 64-bit/66MHz 4 ... 6 -Fibre Storage Controllers andOptions 324P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 4 ... 6 -- 1724100 FAStT100 Storage Server - - - -- 172260U FAStT600 Storage Server- 17226LU FAStT600 Entry Storage Server - - - -- 17421RU FAStT700 Storage Server - - - -- 174290U FAStT900 Storage Server - - - -- 2109F16 SAN Fibre Channel Switch, 16-Port - - - -Networking25P2889 06P3601 10/100 Ethernet Server Adapter Half 32-bit/33MHz 2 ... 6 -31P9605 31P9601 PRO/1000 MT Server Ethernet Adapter byIntel- 73P2701 PRO/1000 MT Dual Port Server EthernetAdapter by Intel32P9298 31P6401 NetXtreme 1000 T Dual Port EthernetAdapter (copper)Half 64-bit/133MHz 4 ... 6 -Half 64-bit/133MHz 4 ... 6 -Half 64-bit/133MHz 4 ... 6 -System Management02R1676 59P2984 Remote Supervisor Adapter II Half 32-bit/33MHz 2 -Other I/O32P8862 33L4618 V.90 PCI Data/Fax Modem4 Half 32-bit/33MHz 1 -1. xSeries 226 does not have any Active-PCI slots.2. Currently only one type of RAID is supported at a time; for example, ServeRAID-7e (RAID-0 or RAID-1 with integrated controller), ServeRAID-4Lx or ServeRAID-7t, etc.3. See Fibre Channel Solutions Overview section for additional configuration information.4. Due to homologation variances, modem availability may differ by country.Chapter 8. xSeries 226 71


xSeries 226 Power and AccessoriesOptionNumberDescriptionPower 1Tower Uninterruptible Power Supply (UPS) 221301TX21302TX21303TX21304TX21305TX21306TXUPS 750TLVUPS 750THVUPS 1000TLVUPS 1000THVUPS 1500TLVUPS 1500THVRack Mount Uninterruptible Power Supply (UPS) 232P102032P1022APC 2U Smart-UPS 1400RMBAPC 2U Smart-UPS 1400RMiB2130R30 UPS3000XLV 32130R31 UPS3000XHV 337L6861 APC Smart-UPS 5000RMB 437L6862 APC Smart-UPS 5000RMiB 432P1692 UPS Extend Run Battery Pack 31. Nonredundant power models include a single 530w nonhot-swap power supply and line cord. Redundantpower models include two 514w power supplies and two line cords.2. For runtimes and UPS attributes, see Appendix C: UPS Runtime Estimate.3. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.4. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.72 Configuration and Options Guide


Refer to the Important Notices section for important noticesSBB NumberOptionNumberDescriptionRack/Tower Conversion Kits- 26K6095 4U Extended Depth Tower to Rack Conversion Kit 1- 1735L04 NetBay Local Console Manager- 1735R16 NetBay Remote Console Manager- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion Option- 09N4290 NetBay 1x4 Console Switch- 09N4291 NetBay 2x8 Console SwitchRack Console Connectivity 2Monitors- 17231UX 1U Flat Panel Monitor Console Kit (with US Space Travel keyboard)- 17231NX 1U Flat Panel Monitor Console Kit (without keyboard)- 6636AB1 L150 ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image), business black- 6636HB1 L150p ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image), business black- 6734HB0 L170p ThinkVision 17in LCD Flat Panel Monitor (432mm, 17in viewable image), business black- 673766N C170 ThinkVision 17in CRT Flat Panel Monitor (406.4mm, 16in viewable image), business black- 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black- 63324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black- 32P1702 NetBay 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard)- 32P1703 NetBay 2U Flat Panel Monitor Console Kit (without keyboard)Keyboard and Mouse02R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys, business black- 31P8950 USB Keyboard with UltraNav - US English- 73P2620 USB Keyboard Enhanced Performance Keyboard - US English- 73P3144 Space Travel PS2 Keyboard - US English02R3421 28L3673 Sleek 2-Button Mouse, business black- 06P4069 USB Optical Wheel MouseNote: Refer to the Rack Cabinets and Options section for more information concerning IBM racks and rack-supporteddevices.1. Rack kit is 24in deep.2. USB accessories are not compatible with the NetBay console switches. They attach to a single USB-capable server.Chapter 8. xSeries 226 73


xSeries 226 Tape OptionsSBB NumberOptionNumberTape DrivesBaysSupported 1StorageInterfaceForm FactorExt TapeEncl- 48P7042 20/40GB TR7 Internal IDE Tape Drive 1, 2 Std. IDE 89mm (3.5in) SL or133mm (5.25in) HH-32P8861 00N7991 20/40GB DDS/4 4mm Internal TapeDrive71P9176 71P9145 36/72GB DDS/5 Internal SCSI TapeDrive1, 2 Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH1, 2 Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH35100200034B0X-71P9166 59P6746 80/160GB VXA-2 SCSI Tape Drive 1, 2 Ultra2 (16-bit) 133mm (5.25in) HH 35100200034B0X- 59P6717 100/200GB LTO Tape Drive 1, 2 Ultra2 (16-bit) 133mm (5.25in) HH 35100200034B0X- 59P6719 40/80GB DLT VS80 Internal SCSI TapeDrive1, 2 Ultra2 (16-bit) 133mm (5.25in) HH 35100200034B0X- 59P6745 80/160GB DLT VS160 SCSI Tape Drive 1, 2 Ultra160(16-bit)133mm (5.25in) HH 35100200034B0X49P3225 00N8016 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 0034B0X3503B1X- 59P6736 160/320GB SDLT SCSI Tape DriveOption- Ultra2 (16-bit) 133mm (5.25in) FH 0034B0X3503B1X- 59P6744 200/400GB LTO Full-High Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 0034B0XTape Autoloaders- 36232LX 200/400GB 2U LTO Generation 2 TapeAutoloader 3623 Model 2LXExternal Tape Libraries- Ultra160(16-bit)2U Rack -- 18P9212 TotalStorage Ultrium LVD Tape Library3582 Model L23- Ultra160(16-bit)Stand-alone or 4URack-- 18P9337 TotalStorage Ultrium Fibre TapeLibrary 3582 Model F23- 2Gb FibreChannelStand-alone or 4URack-- 4560SLX SDLT/LTO Modular Tape Library - Ultra2 (16-bit) 5U Rack -External Tape Enclosures- 0034B0X NetBAY Tape Enclosure (Rack Mount) - Ultra2 (16-bit) 4U Rack -- 3510020 External Half-High SCSI StorageEnclosure 2- LVD (16-bit) Desktop -- 3503B1X Full-high SCSI Tape Enclosure Ultra2 (16-bit) Desktop or 3U Rack -Associated Options- 00N7956 68-pin External Multimode LVD/SESCSI Terminator- LVD/SE(16-bit)External 3510020Note: The integrated SCSI controller is available on SATA models for tape support only (internal or external).Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. Installation may require removing a standard device.2. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).74 Configuration and Options Guide


Chapter 9. xSeries 235xSeries 235 At-A-GlancePart Number 1Processor/FSB Speed (GHz/MHz)Number of Processors (Std/Max)CacheMemory (Std/Max) (DIMM) 2, 3Form FactorPower Supply Quantity (Std/Max)Hot-Swap (Power, Slots, HDD, Fans)Redundacy (Optional, Standard) 4System Management ProcessorsOnboard Ethernet 5Storage Controller 6Removable Media Bays (Total/Avail) 7Internal HDD Storage (Std/Max) 8CD-ROM (IDE)Bays (Total/Avail) 9Slots (Total/Avail) 108671-K1X 5 2.67/533 111/2 512KBL2512MB/12GBTower 1/2 S, H,FO - Power,S - FansY 1Gb DualU3204/2 0/1321.2GB 48x-20x10/8 6/68671-KAX 5 2.67/53311 1/2 512KBL2512MB/12GBTower 2/2 P, S,H, FS - Power,S - FansY 1Gb DualU3204/2 0/1321.2GB 48x-20x10/8 6/68671-L1X 5 112.8/533 1/2 512KBL2512MB/12GBTower 1/2 S, H,FO - Power,S - FansY 1Gb DualU3204/2 0/1321.2GB 48x-20x10/8 6/68671-LAX 5 112.8/533 1/2 512KBL2512MB/12GBTower 2/2 P, S,H, FS - Power,S - FansY 1Gb DualU3204/2 0/1321.2GB 48x-20x10/8 6/68671-M1X 5 113.06/533 1/2 512KBL2512MB/12GBTower 1/2 S, H,FO - Power,S - FansY 1Gb DualU3204/2 0/1321.2GB 48x-20x10/8 6/68671-MAX 5 3.06/53311 1/2 512KBL2512MB/12GBTower 2/2 P, S,H, FS - Power,S - FansY 1Gb DualU3204/2 0/1321.2GB 48x-20x10/8 6/68671-G1X 3.2/533 121/2 1MB L3 1GB/12GBTower 1/2 S, H,FO - Power,S - FansY 1Gb DualU3204/2 0/1321.2GB 48x-20x10/8 6/68671-GAX 123.2/533 1/2 1MB L3 1GB/12GBTower 2/2 P, S,H, FS - Power,S - FansY 1Gb DualU3204/2 0/1321.2GB 48x-20x10/8 6/61. Ships with standard keyboard and mouse. See Power and Accessories section for tower-to-rack conversion kit.2. High-speed, two-way interleaved 133MHz DDR PC2100 RDIMMs.3. x235 models KxX, LxX and MxX ship with non-Chipkill 256MB DIMMs.4. See ‘xSeries 235 Power and Accessories’ section for important information concerning x235 power supplies.5. The standard Ethernet controller is a Broadcom 5703 gigabit Ethernet controller integrated into the planar.6. The dual-channel, Ultra320 integrated controller supports both Ultra160 and Ultra320 HDDs, but the entire SCSI bus will default to the slower rate(MB/second) if HDDs of different technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocated for mirroring if aRAID adapter is not installed. One additional HDD may be designated as a hot-spare for HDDs configured in the onboard mirror. Mirrored and hotspareHDDs must be matched.7. xSeries 235 includes two available removable media bays that can be converted to three slim-line (SL) hot-swap bays with the addition of optionalUltra320 3-Pack Kit (P/N 33P2751).8. Assumes installation of optional Ultra320 3-Pack Kit (P/N 33P2751), which converts the two available removable media bays into three slim-line(SL) hot-swap bays. Maximum storage is based on nine 146.8GB 10Krpm Ultra320 SCSI Hot-swap HDDs (P/N 32P0728).9. The total number of bays can be increased to nine by installing an optional Ultra320 3-pack Kit (P/N 33P2751), which converts the two availableremovable media bays to three SL hot-swap HDD bays.10. Includes two hot-plug PCI-X 64-bit 133MHz slots, three 64-bit 100MHz nonhot-plug slots and one 32-bit 33MHz slot. See I/O Options for additionalinformation.11. Intel Xeon processor with advanced transfer L2 cache and a 533MHz (quad-pumped) Front Side Bus (FSB).12. Intel Xeon processor with advanced transfer L2 cache, an additional L3 cache, and a 533MHz (quad-pumped) Front Side Bus (FSB).75


xSeries 235 Processor OptionsSBBNumberOptionNumberProcessor UpgradesSMPSupport 173P9154 71P8966 2.67GHz/533MHz-512KB L2 Cache Xeon Processor KxX73P9155 71P8967 2.8GHz/533MHz-512KB L2 Cache Xeon Processor LxX90P0587 02R1988 3.06GHz/533MHz-512KB L2 Cache Xeon Processor MxX23K4993 23K4523 3.2GHz/533MHz-1MB L3 Cache Xeon Processor GxX1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed,and cache size.xSeries 235 Memory OptionsSBBNumberOptionNumberMemory Description 1, 273P2876 373P2868 512MB DDR PC2100 ECC RDIMM Kit 437L3538 33L5038 512MB DDR PC2100 ECC RDIMM33P3126 33L5039 1GB DDR PC2100 ECC RDIMM32P9223 33L5040 2GB DDR PC2100 ECC RDIMM1. Due to two-way interleaving, installation of memory options in matchedpairs beginning with set 1 is required.2. Chipkill is available in 512MB DIMMs and above. Installation of a non-Chipkill DIMM will disable all Chipkill function.3. This SBB number contains one 256MB nonChipkill DIMM.4. The 512MB kit contains two 256MB nonChipkill DIMMs.RDIMMRDIMMRDIMM 3RDIMM 4Set 1: RDIMMs 5, 6Set 2: RDIMMs 3, 4Set 3: RDIMMs 1, 2RDIMMRDIMMxSeries 235 Internal SCSI CablingThe xSeries 235 contains 10 drive bays in the standard base configuration. The six 3.5in hot-swap bays onthe lower half of the chassis front support Ultra320 or Ultra160 hot-swap HDDs. The four media bays abovethe HDD bays include a 3.5in bay for the standard floppy disk drive (FDD) and a 5.25in bay containing thestandard CD-ROM. The two open 5.25in media bays are available for removable media devices such as tapedrives, or an Ultra320 3-bay kit can be installed in two available media bays to provide a hot-swapbackplane that supports three slim-line hot-swap HDDs.The standard six-bay hot-swap backplane connects to one channel of the dual-channel integrated Ultra320storage controller through a single-drop 16-bit LVD SCSI cable. If internal RAID is required, this cablecannot be used to connect optional ServeRAID-6M or 4Lx controllers to the hot-swap backplane. Instead,the optional Single-drop Internal LVD Ultra320 SCSI Cable must be purchased. If the RAID controller isServeRAID-5i or 6i+, an optional cable is not required because both channels of the integrated controller aremanaged by these two adapters when installed. The standard SCSI cable cannot be used to connect to anoptional SCSI media device because it is not terminated.76 Configuration and Options Guide


Refer to the Important Notices section for important noticesOne full-high or half-high tape drive can be installed in the available media bays. The terminated LVD SCSIcable provided with the tape drive can be used to connect the tape drive to the integrated controller ifServeRAID-6M or 4Lx is installed (or if no RAID controller is installed). If ServeRAID-5i or 6i+ is installed,only supported tape drives can be connected to the RAID bus (see Tape Options section). If the tape drive isnot supported for RAID attachment or the configuration does not require the tape drive to be installed onthe RAID bus, use an optional Ultra160 or Ultra320 SCSI adapter.External tape drive support requires installation of the External SCSI Interface Kit in order to connect theexternal port to the second channel of the integrated controller. The external port cannot be enabled if bothchannels of the integrated controller are connected internally. If ServeRAID-5i or 6i+ is installed, onlyRAID-supported tape drives can be installed in the tape enclosure. An external tape enclosure is alsosupported by installing an optional SCSI adapter, in which case the External SCSI Interface Kit is no longerrequired.xSeries 235 Hard Disk Drive (HDD) and Optical Storage OptionsSBBNumberOptionNumberDescription Height BaysSupported 1MaximumQuantity 2Hot-Swap Ultra320 HDDs32P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 932P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 932P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 932P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 932P0445 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 9Associated Options33P3127 33P2751 Ultra320 3-Pack Kit 324P7970 24P7973 Ultra320 External SCSI Interface Kit 4Optical Devices25P5573 22P6950 16X Max RAM-Read DVD-ROM Drive 5, 6External Storage Expansion Units 7- A+B 1- - 1Bays SupportedA, B, CForm Factor- 17331RU EXP400 Storage Expansion Unit8 Rack (3U)- 09N7296 EXP Rack-to-Tower Conversion Kit 9 -- 1724100 FAStT100 Storage Server Rack (3U)- 171010U FAStT EXP100 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 172260U FAStT600 Storage Server (US line cord, English pubs) Rack (3U)- 17226LU FAStT600 Entry Storage Server Rack (3U)- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)- 35421RU 10FAStT200 Storage Server Rack (3U)- 35422RU FAStT200 HA Storage Server Rack (3U)- 19K1121 FAStT200 Redundant RAID Controller -1. Install HDDs in the order indicated in the system bay diagram (from bottom of chassis). If an Ultra320 3-pack Kit is installed, install HDDs frombottom to top.2. Maximum quantity of HDDs can be increased to nine by converting the two removable media bays to three SL HDD bays using the 3-PackUltra320 3-Pack Kit (P/N 33P2751). When integrated mirroring is enabled, the maximum quantity of HDDs supported on the standard backplaneis three (two mirrored and one hot-spare).3. Removable media bays A and B can be converted to three SL hot-swap bays using the optional Ultra320 3-Pack Kit (P/N 33P2751). The hotswapbackplane is cabled as an independent bus.4. Required to enable a 0.8mm VHDCI external connector for external SCSI attachment to the second channel of the integrated controller. Referto Appendix D: Cables - Storage Units - Controllers for additional information.5. Either replace standard CD-ROM or install in one of the media bays. A two-drop IDE cable is included with the optional optical drive. If installingas an additional device, connect the cable to each optical device and the IDE connector on the system board. Configure the optional deviceas a master using the preset configuration if replacing the standard device or as a slave if installed as an additional device.Chapter 9. xSeries 235 77


6. Audio and video are not supported for DVD-ROM drives. These drives are for data retrieval only.7. To configure a SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllers to confirmthe controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options,see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre Channel Solutions Overview section.8. In order to attach EXP400 to the integrated controller when ServeRAID-5i or 6i+ is installed, the external SCSI interface kit is required to enablea 0.8mm VHDCI external connector on the system chassis.9. To convert an EXP Storage Unit to a tower form factor the EXP Rack-to-Tower Conversion Kit is required.10. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).Bay Form Factor Height Front Access Usage133mm (5.25in) HH 2YesOpenB 1 133mm (5.25in) 2HH Yes Open133mm (5.25in) HH Yes IDE CD-ROM89mm (3.5in) SL Yes Diskette1 ... 6 HS SL Yes OpenA 1 1. Removable media bays A and B can be converted to three hot-C 3 D 4 swap HDD bays using the optional Ultra320 3-Pack Kit (P/N33P2751).2. Two half-high (HH) bays can be combined to support a single fullhigh(FH) device.3. This bay supports optical drives only.4. This bay supports a floppy disk drive only.RM ARM BCD-ROMFDDHDD 6HDD 5HDD 4HDD 3HDD 2HDD 1x235 front view78 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 235 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCI Support 1 Slots Supported 1 Hot-Plug 2Storage Controllers 302R0996 02R0988 4ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz 2 ... 4 -02R0995 32P0033 4ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 2 ... 4 -- 13N2190 ServeRAID-6i+ Controller Half 64-bit/133MHz 4 -32P0022 25P3492 ServeRAID-5i Controller Full 64-bit/66MHz 4 ‘ -24P3472 06P5740 4ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit/66MHz 2 ... 4 X24P2650 19K4646 PCI Wide Ultra160 SCSI Adapter Half 64-bit/66MHz 2 ... 6 -71P8614 71P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz 2 ... 6 -Internal RAID Cable02R2046 02R2068 Ultra320 Internal Single-drop 24in LVD SCSICable 4 - - - -Fibre Storage Controllers and Options 524P2334 00N6881 FAStT Host Adapter Half 64-bit/66MHz 2 ... 6 X24P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 2 ... 6 X- 174290U FAStT900 Storage Server (US line cord) - - - -- 17421RU FAStT700 Fibre Channel Storage Server - - - -- 172260U FAStT600 Storage Server (US line cord, Englishpubs)- - - -- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 1724100 FAStT100 Storage Server - - - -- 2034212 McDATA Sphereon 4300 Fabric Switch Model212- - - -- 2005H08 TotalStorage SAN Fabric Switch Model H08 - - - -- 2005H16 TotalStorage SAN Fabric Switch Model H16 - - - -- 3534F08 TotalStorage SAN Switch F08, 8-port - - - -- 2109F16 SAN Fibre Channel Switch, 16-Port - - - -Networking 625P2889 06P3601 10/100 Ethernet Server Adapter7 Half 32-bit/33MHz 2 ... 6 X31P9605 31P9601 PRO/1000 MT Server Ethernet Adapter by Intel Half 64-bit/133MHz 1 ... 7 X32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit/133MHz 2 ... 6 X31P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) 7 Half 64-bit/133MHz 2 ... 6 X32P9298 31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter Half 64-bit/133MHz 2 ... 6 X(copper) 7Other I/O 8- 1519100 Integrated xSeries Adapter for iSeries 9 Full 64-bit/66MHz 4 9 -32P8862 33L4618 10V.90 PCI Data/Fax Modem Half 32-bit/33MHz 1 -System Management02R1676 59P2984 11Remote Supervisor Adapter II Half 32-bit/33MHz 1 -Chapter 9. xSeries 235 79


1. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installedin a 33MHz slot. 33MHz adapters will reduce 66MHz buses to 33MHz. 133MHz PCI-X adapters are backward compatible with 33/66MHz, 64-bit PCI-based servers.2. Slots five and six (bus 2) are hot-plug capable. For Network Operating System support, access www.pc.ibm.com/us/compat.3. xSeries 235 includes a dual-channel Ultra320 SCSI controller with two internal connectors. An external 0.8mm VHDCI connector can be enabledusing optional External SCSI Interface Kit (P/N 32P8164) to connect channel A to the external connector. External connection using thisoption and the external knockout is not supported if both channels of the integrated controller are connected internally, in which case a supportedPCI SCSI controller is required to support an external SCSI device. See “Internal SCSI Cabling” for cabling alternatives.4. Cable option 02R2068 is required when connecting internal HDDs to ServeRAID-6M and ServeRAID-4Lx.5. See Fibre Channel Solutions Overview section for additional configuration information.6. xSeries 235 includes a copper integrated 10/100/1000Mbps Broadcom (BCM5703) single-port Ethernet controller.7. The Wake on LAN (WoL) function provided by this Ethernet PCI adapter is supported in this system.8. xSeries 235 provides three USB ports (two on the rear of the chassis and one on the front), two serial ports on 533MHz FSB models, two RS-485 ports for system management and one parallel port.9. The Integrated xSeries Adapter for iSeries allows interconnectivity with an IBM eServer iServer server. This card occupies two slot positions.It is restricted to slot five on 533MHz models. Remote Supervisor Adapter I or II must also be installed.10. Due to homologation variances, modem availability may differ by country.11. Remote Supervisor Adapter II (P/N 59P2984) includes an internal 20-pin ribbon cable for connection to the system planar, an interconnectcable, a 56w AC power adapter, an intra-rack power cable and a country-specific wall power cord. External connectors include an RS230 (9-pin) serial port, 10/100 base T Ethernet port (RJ-45), interconnect port (RJ-11) and power connector. The interconnect cable includes a singleRJ-11 connector and dual RJ-48 ports. Supports an interconnect network of up to 24 RSAs or ISMPs with aggregate cable connection length of300ft (91.4m) or less. No more than 12 ASMPs are supported in an interconnect network. RJ-45 bus is self-terminating, i.e., terminators are notrequired for the interconnect bus.PCI slot 1PCI slot 2PCI slot 3PCI slot 4PCI slot 5PCI slot 6xSeries 235 rear viewSlot 1: Bus 0, 32-bit, 33MHz, 5v, full-lengthSlot 2: Bus 1 (primary), 64-bit, 100MHz, 3.3v, full-length PCI-XSlot 3: Bus 1 (primary), 64-bit, 100MHz, 3.3v, full-length PCI-XSlot 4: Bus 1 (secondary), 64-bit, 100MHz, 3.3v, full-length PCI-XSlot 5: Bus 2, 64-bit, 100MHz, 3.3v, full-length Active PCI-XSlot 6: Bus 2, 64-bit, 100MHz, 3.3v, full-length Active PCI-X80 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 235 Power and AccessoriesSBBNumberOptionNumberDescriptionPower 102R1863 02R1874 560w Power Supply for 533MHz FSB 202R1963 02R2015 660w Redundant Power Supply for 533MHz FSB Option with US line cord 3- 21301TX UPS750TLV- 21302TX UPS750THV- 21303TX UPS1000TLV- 21304TX UPS1000THV- 21305TX UPS1500TLV- 21306TX UPS1500THV- 32P1020 APC 2U Smart-UPS 1400RMB- 2130R30 UPS3000XLV 5- 2130R31 UPS3000XHV 5- 32P1692 UPS Extend Run Battery Pack 5- 37L6861 APC Smart-UPS 5000RMB 6Tower Uninterruptible Power Supply (UPS) 4Rack-mount Uninterruptible Power Supply (UPS) 4Monitors 7- 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 8- 63324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black 8- 32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 9- 32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 9- 17231UX 1U Flat Panel Monitor Console Kit (with US Space Travel keyboard) 10- 17231NX 1U Flat Panel Monitor Console Kit (without keyboard) 10- 6734HB0 L170p ThinkVision 17in LCD Flat Panel Monitor (432mm, 17in viewable image),business black- 6636AB1 L150 ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image),business black- 6636HB1 L150p ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image),business black1. xSeries 235 2.xxGHz models ship with a 560w power supply whereas the 3.xxGHz models ship with a 660wPSU. Hot-swap redundant power models ship with two PSUs and two line cords. Non-redundant power modelsinclude a single nonhot-swap power supply with a single line cord. N+N power supply redundancy for thesemodels may be achieved by removing the standard power supply and installing a hot-swap power backplaneand two hot-swap redundant power supplies provided in the appropriate power supply upgrade option.2. 560w Power Supply for 533MHz FSB (P/N 02R1874) includes a power backplane, two power supplies, two9ft power cords and is compatible only with 2.xxGHz/533MHz FSB models.3. 660w Redundant Power Supply for 533MHz FSB Option with US line cord (P/N 02R2015) includes a powerbackplane, two power supplies, two 9ft power cords and is compatible only with 3.xxGHz models.4. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.5. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.6. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.7. xSeries 235 uses an integrated ATI Rage XL video controller with 8MB of memory.8. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).9. Includes a 15in Flat Panel Monitor.10. Includes a 17in Flat Panel Monitor.Chapter 9. xSeries 235 81


SBBNumberOptionNumberDescriptionConversion Kits- 59P4211 5Ux24D Tower-to-Rack Kit IIIxSeries 235 Tape OptionsRack and NetBAY 1Refer to the Rack Cabinets and Options section for information concerning IBM racksand rack-supported devices.- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion Option- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 2x8 Console Switch32P8917 28L3644 Space Saver II Keyboard 4, 5Console Connectivity 2Keyboard and Mouse 302R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys business black 602R3421 28L3673 Sleek 2-Button Mouse, business black1. Rack installations require a supported IBM rack and a tower-to-rack conversion kit.2. Refer to the Rack Console Options section for information regarding console connectivity using these options.3. xSeries 235 includes tower models only and ships with a keyboard and mouse.4. Installation within a rack requires an optional keyboard tray (P/N 28L4707) which stows in ready-to-use position,or NetBAY 2U Flat Panel Monitor Console Kit. Standard with 2U NetBAY console kits.5. Advanced TrackPoint IV features are not available on IBM xSeries systems.6. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboardtray with a flat panel display.SBBNumberOptionNumberTape DrivesBaysSupportedStorageInterfaceForm FactorExt TapeEnclosures 132P8861 00N7991 20/40GB DDS/4 4mm Internal Tape Drive A, B Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH71P9176 71P9145 36/72GB DDS/5 Internal SCSI Tape Drive A, B Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH35100200034B0X35100200034B0X- 59P6719 40/80GB DLT VS80 Internal SCSI TapeDriveA, B Ultra2 (16-bit) 133mm (5.25in) HH 35100200034B0X71P9187 59P6745 80/160GB DLT VS160 SCSI Tape Drive A, B Ultra160 (16-bit) 133mm (5.25in) HH 35100200034B0X71P9166 59P6746 80/160GB VXA-2 SCSI Tape Drive A, B Ultra2 (16-bit) 133mm (5.25in) HH 35100200034B0X49P3225 00N8016 100/200GB LTO Tape Drive A+B Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0X- 59P6717 100/200GB LTO Tape Drive A, B Ultra2 (16-bit) 133mm (5.25in) HH 3503B1X0034B0X24P7303 59P6736 160/320GB SDLT Tape Drive A+B Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0X71P9165 59P6744 200/400GB LTO Full-High Tape Drive A+B Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0XTape Autoloaders- 00N7992 120/240GB DDS/4 Tape Autoloader A+B Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X82 Configuration and Options Guide


Refer to the Important Notices section for important notices- 36232LX 200/400GB 2U LTO Generation 2 TapeAutoloader 3623 Model 2LX- 360716X 3607 Series 1760GB/3.5TB SDLTpro TapeAutoloader- 360726X 3607 Series 1.6TB/3.2TB LTO TapeAutoloader- 18P9133 TotalStorage Ultrium LVD Tape Drive 3580Model L23- 3581L28 TotalStorage Ultrium LVD Tape 2UAutoloader 3581- Ultra160 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- Ultra160 (16-bit) Stand-alone or 5U Rack 2 -- Ultra160 (16-bit) Stand-alone or 2U Rack 2- 3581F28 TotalStorage Ultrium Fibre Tape 2UAutoloader 3581External Tape Enclosures- 2Gb FibreChannelStand-alone or 2U Rack 2- 3510020 External Half-High SCSI StorageEnclosure 3, 4 - LVD (16-bit) Desktop -- 3503B1X 5Full-High SCSI Tape Enclosure - Ultra2 (16-bit) Desktop or 3U Rack -- 0034B0X 3NetBAY Tape Enclosure (Rack Mount) - Ultra2 (16-bit) 4U Rack -- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160 (16-bit) 1U Rack -External Tape Libraries 6- 18P9212 TotalStorage Ultrium LVD Tape Library3582 Model L23 3 - Ultra160 (16-bit) Stand-alone or 4U Rack 7 -- 18P9337 TotalStorage Ultrium Fibre Tape Library- 2Gb Fibre3582 Model F23 3 ChannelStand-alone or 4U Rack 7 -Associated Options- 00N7956 68-pin External Multimode LVD/SE SCSITerminator- LVD/SE (16-bit) External 351002024P7970 24P7973 Ultra320 External SCSI Connector CableOption 8 - Ultra320 LVD Internal -Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. To determine external cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configuratorsection and the desired enclosure, then refer to Appendix D: Cables - Storage Units - Controllers.2. Rack mount requires an optional rack kit. See tape drive appendix for more information.3. Requires 68-pin External Multimode LVD/SE SCSI terminator (P/N 00N7956).4. External cables are not included.5. An external cable is included.6. Tape library attributes and options are located in the tape library appendix.7. Rack mount kit is standard. Stand-alone kit is optional. See tape drive appendix for more information and options.8. Required to connect one channel of the integrated Ultra320 storage controller to the 0.8mm VHDCI external port, which cannot be enabled ifboth channels of the integrated controller are connected internally. If both SCSI channels are being used for internal use, an optional SCSI controlleris required to support external SCSI tape attachment.Chapter 9. xSeries 235 83


84 Configuration and Options Guide


Chapter 10. xSeries 236xSeries 236 At-A-GlancePart Number 1CPU/FSB Speed (GHz/MHz) - Cache 2Processor Quantity (Std/Max)Memory (Std/Max) 3, 4Form Factor 5Power Supply Quantity (Std/Max) 6Hot-swap (Power, Slots, HDD, Fans) 7System Management ProcessorIntegrated Ethernet 8Storage Controller 9Internal HDD InterfaceInternal HDD Storage (Std/Max) 10Optical DriveBays (Total/Avail)Slots (Total/Avail)8841-01Y 2.8/800 -1MB L21/2 512MB/16GB Tower 1/2 P, S,H, FYDual1GBDualU320Hotswap0GB/1.3TBCD-ROM(48x-24x)10/8 6/68841-11Y 3.0/800 -1MB L21/2 1GB/16GB Tower 1/2 P, S,H, FYDual1GBDualU320Hotswap0GB/1.3TBCD-ROM(48x-24x)10/8 6/68841-21Y 3.2/800 -1MB L21/2 1GB/16GB Tower 1/2 P, S,H, FYDual1GBDualU320Hotswap0GB/1.3TBCD-ROM(48x-24x)10/8 6/68841-31Y 3.4/800 -1MB L21/2 1GB/16GB Tower 1/2 P, S,H, FYDual1GBDualU320Hotswap0GB/1.3TBCD-ROM(48x-24x)10/8 6/68841-32Y 3.4/800 -1MB L21/2 1GB/16GB Tower 2/2 P, S,H, FY 11Dual1GBDualU320Hotswap0GB/1.3TBCD-ROM(48x-24x)4/4 6/68841-41Y 3.6/800 -1MB L21/2 1GB/16GB Tower 1/2 P, S,H, FYDual1GBDualU320Hotswap0GB/1.3TBCD-ROM(48x-24x)10/8 6/6Note: xSeries 236 also provides three USB ports (one front, two rear), two 9-pin serial ports, one systems management RS-485 port,one systems management Ethernet port, keyboard port, mouse port, video port and an integrated ATI Radeon 7000M graphicscontroller with 16 MB of video memory. A keyboard and mouse is also provided.1. Model numbers provided are worldwide generally available variant (GAV) model numbers which are not orderable as listed and need to bemodified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8841-01Y is 8841-01U. See the product specific Official IBM announcement letter for other country-specific GAV model numbers. GAV to MTM mappingfor L.A. and A.P. Geographies follow the same pattern. Substitute the last character with a country-specific designator.2. Intel Xeon processor with Extended Memory 64 Technology (EM64T), L2 cache and an 800MHz (quad-pumped) Front Side Bus (FSB).3. High-speed, two-way interleaved PC2-3200 RDIMMs. Maximum capacity requires replacing the standard DIMMs with 2GB DIMMs. x236 willsupport 16GB of memory if/when a supported 2GB DIMM is available.4. Memory-mirroring, hot-spare memory and Chipkill functions are supported. Chipkill is available on DIMMs 512MB and greater.5. A 5U tower-to-rack conversion kit is available.6. See ‘Power and Accessories’ section for more information on the power supplies.7. x236 provides one Active-PCI slot.8. Dual Broadcom 5721 Gigabit Ethernet controllers.9. The integrated dual-channel, Ultra320 SCSI controller supports integrated RAID-0, 1 and 10.10. Maximum capacity is based on nine 146.8GB HDDs and requires installing the optional Ultra320 3-pack kit.11. This model ships standard with the Remote Supervisor Adapter II SlimLine adapter installed into a dedicated slot.xSeries 236 Processor OptionsSBB NumberOptionNumberProcessor Options SMP Support 113M7939 13N0681 2.8GHz/800MHz-1MB L2 Cache Xeon Processor 0xY13M7940 13N0688 3.0GHz/800MHz 1MB L2 Cache, Xeon Processor 1xY25K9555 13N0683 3.2GHz/800MHz 1MB L2 Cache, Xeon Processor 2xY25K9556 13N0684 3.4GHz/800MHz 1 MB L2 Cache, Xeon Processor 3xY25K9557 13N0685 3.6GHz/800MHz 1MB L2 Cache, Xeon Processor 4xYNote: x236 processor options support Intel’s Extended Memory 64 Technology (EM64T)85


1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed and cachesize.xSeries 236 Memory OptionsSBBNumber 1OptionNumberMemory Options90P0870 73P3523 512MB (2x256MB) PC2-3200 ECC DDR2 RDIMM Kit90P1218 73P3522 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit73P2873 73P2865 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit 273P2874 73P2866 2GB (2x1GB) PC2-3200 ECC DDR2 RDIMM Kit 2Note: 16GB of memory is supported, if/when a supported 2GB DIMM becomesavailable, via eight DIMM slots. Due to two-way interleaving, installation of memoryDIMMs in matched pairs is required beginning with DIMM slots one and two, thenthree and four, then five and six, then DIMM slots seven and eight. Memory-mirroringrequires all installed DIMMs to match and effectively reduces available memory byhalf. Hot-spare memory requires all installed DIMMs to match except for the last pairwhich must be of equal size or greater than other installed pairs.1. Quantity two of each SBB PN must be ordered to equal its corresponding option.2. Supports Chipkill. Mixing Chipkill DIMMs with nonChipkill DIMMs will disable allChipkill function.Model0xY1xx, 2xx, 3xx,4xx2 x 256MB PC2-3200 ECC DDR2 RDIMM2 x 512MB PC2-3200 ECC DDR2 RDIMMStd. DIMM Configuration86 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 236 System BoardxSeries 236 Internal CablingxSeries 236 models are cabled internally with a single, 1-drop LVD SCSI cable, connecting one channel ofthe integrated, dual channel Ultra320 SCSI controller to the hot-swap backplane.The second SCSI channel can be used to connect to the optional Ultra320 3-Pack HDD kit, an optional SCSItape or can be used for external attachment via the optional Ultra320 SCSI External Interface Kit enablingan external 0.8mm VHDCI SCSI connector.All models provide a single ATA-100 IDE connector supporting two IDE devices, one device being thestandard optical cabled via a 2-drop IDE cable.Chapter 10. xSeries 236 87


xSeries 236 Hard Disk Drive (HDD) and Optical Storage OptionsSBB NumberOptionNumberDescription Height Bays Supported 1Max Qty 2Hot-swap Ultra320 HDDs90P1328 90P1304 36.4GB 10K rpm Ultra320 SCSI HDD SSL 5 ... 10 990P1329 90P1305 73.4GB 10K rpm Ultra320 SCSI HDD SSL 5 ... 10 990P1336 90P1319 73.4GB 15K rpm Ultra320 SCSI HDD SSL 5 ... 10 990P1330 90P1306 146.8GB 10K rpm Ultra320 SCSI HDD SSL 5 ... 10 9Associated Options33P3127 33P2751 Ultra320 3-Pack HDD Kit 324P7970 24P7973 Ultra320 External SCSI Interface Kit 4- 1 + 2 3 1- - 1Optical Devices 5- 10K3782 48X-20X Max CD-ROM Drive HH 1 .. 3 2- 22P7042 48X/32X/48X Max CD-RW Drive HH 1 .. 3 2- 73P3300 48X/32X/48X/16X Max CD-RW/DVD-ROMCombination DriveHH 1 .. 3 2- 73P3305 Multi-Burner Plus HH 1 .. 3 202R3278 22P6950 16X Max RAM-Read DVD-ROM Drive HH 1 .. 3 2External Storage Expansion Units 6Form Factor- 17331RU EXP400 Storage Expansion Unit Rack (3U)- 171010U FAStT EXP100 Storage Expansion Unit Rack (3U)- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 1724100 FAStT100 Storage Server Rack (3U)- 172260U FAStT600 Storage Server Rack (3U)- 17226LU FAStT600 Entry Storage Server Rack (3U)1. Bays 1 and 2 can be converted to support three additional HDDs for a total of nine HDDs.2. Maximum quantity of supported HDDs requires installation of the optical Ultra320 3-Pack HDD kit. Six HDDs are supported without this kit.3. The Ultra320 3-Pack HDD Kit converts bays 1 and 2 into three additional HDD bays.4. Required to enable a 0.8mm VHDCI external SCSI connector. Connects to the second channel of the integrated SCSI controller.5. An optical drive ships standard in bay 3.6. An optical SCSI, RAID or Fibre controller is required in order to attach to the system.Bay Form Factor Height Front Access Usage1 1 133mm (5.25in) HH Yes Optical/Tape/HDD 22 1 133mm (5.25in) HH Yes Optical/Tape/HDD 23 133mm (5.25in) HH Yes Std. Optical4 89mm (3.5in) SL Yes Std.FDD5 89mm (3.5in) SSL Yes HDD6 89mm (3.5in) SSL Yes HDD7 89mm (3.5in) SSL Yes HDD8 89mm (3.5in) SSL Yes HDD9 89mm (3.5in) SSL Yes HDD10 89mm (3.5in) SSL Yes HDD88 Configuration and Options Guide


Refer to the Important Notices section for important notices1. Bays 1 and 2 can be combined to support one full-high device.2. The optional Ultra320 3-Pack HDD Kit converts bays 1 and 2 into three additional hot-swap HDD bays.xSeries 236 Front ViewChapter 10. xSeries 236 89


xSeries 236 I/O OptionsSBB NumberOptionNumberDescriptionAdapterLengthPCI SupportSlotsSupportedHot-PlugStorage Controllers02R0996 02R0988 ServeRAID-6M Controller (256MB Cache) 1Full 64-bit/133MHz 4, 5, 6 -02R0995 32P0033 1ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 4, 5, 6 -71P8653 71P8642 ServeRAID-7k Controller 2- - - -71P8614 71P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz 4, 5, 6 -Associated Options02R2046 02R2068 Ultra320 Internal Single-drop 24in LVD SCSICable 1 - - - -Fibre Storage Controllers andOptions 324P2334 00N6881 FAStT Host Adapter Half 64-bit/66MHz 4, 5, 6 X24P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 4, 5, 6 X- 1724100 FAStT100 Storage Server - - - -172260U FAStT600 Storage Server - - - -- 17226LU FAStT600 Entry Storage Server - - - -- 17421RU FAStT700 Storage Server - - - -- 174290U FAStT900 Storage Server - - - -Networking31P9605 31P9601 PRO/1000 MT Server Ethernet Adapter byIntel- 73P2701 PRO/1000 MT Dual Port Server EthernetAdapter by Intel32P9298 31P6401 NetXtreme 1000 T Dual Port EthernetAdapter (copper)Half 64-bit/133MHz 4, 5, 6 XHalf 64-bit/133MHz 4, 5, 6 XHalf 64-bit/133MHz 4, 5, 6 X25P2889 06P3601 10/100 Ethernet Server Adapter Half 32-bit/33MHz 4, 5, 6 XSystem Management73P9342 73P9341 Remote Supervisor Adapter II SlimLine 2 - - - -Other I/O32P8862 33L4618 V.90 PCI Data/Fax Modem 4Half 32-bit/33MHz 1 -- 31P7201 4V.90 Data/Fax Soft Modem Half 32-bit/33MHz 1, 4, 5, 6 -1. Ultra320 Internal Single-drop 24” LVD SCSI Cable option is required when connecting internal HDDs to ServeRAID-6M adapters.2. Installs into a dedicated slot. Does not consume a PCI slot. Quantity one allowed.3. See Fibre Channel Solutions Overview section for additional configuration information.4. Due to homologation variances, modem availability may differ by country.90 Configuration and Options Guide


Refer to the Important Notices section for important noticesSlot 1: Bus A, 32-bit, 33MHz, Universal voltage, PCI, half-lengthSlot 2: Bus B, PCI-ExpressSlot 3: Bus C, PCI-ExpressSlot 4: Bus D, 64-bit, 100MHz, 3.3v, PCI-X, full-lengthSlot 5: Bus D, 64-bit, 100MHz, 3.3v, PCI-X, full-lengthSlot 6: Bus E, 64-bit, 133MHz, 3.3v, PCI-X, full-lengthxSeries 236 rear viewChapter 10. xSeries 236 91


xSeries 236 Power and AccessoriesOptionNumberDescriptionPower 125K9560670w Hot-Swap Power Supply (North America)24R9258 670w Hot-Swap Power Supply (Worldwide) 2Tower Uninterruptible Power Supply (UPS) 321301TX21302TX21303TX21304TX21305TX21306TXUPS 750TLVUPS 750THVUPS 1000TLVUPS 1000THVUPS 1500TLVUPS 1500THVRack Mount Uninterruptible Power Supply (UPS) 332P102032P1022APC 2U Smart-UPS 1400RMBAPC 2U Smart-UPS 1400RMiB2130R30 UPS3000XLV 42130R31 UPS3000XHV 437L6861 APC Smart-UPS 5000RMB 537L6862 APC Smart-UPS 5000RMiB 532P1692 UPS Extend Run Battery Pack 41. xSeries 236 ships with a single 670w hot-swap capable power supply and line cord. A second hot-swappower supply is optional for redundancy.2. Does not ship with a line cord.3. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.4. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.5. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.92 Configuration and Options Guide


Refer to the Important Notices section for important noticesSBB NumberOptionNumberDescriptionRack/Tower Conversion Kits- 13N0956 5U Extended Depth Tower-to-Rack Conversion Kit 1- 1735L04 NetBay Local Console ManagerRack Console Connectivity 2- 1735R16 NetBay Remote Console Manager- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion Option- 09N4290 NetBay 1x4 Console Switch- 09N4291 NetBay 2x8 Console SwitchKeyboard and Mouse32P8917 28L3644 Space Saver II Keyboard 3- 31P7415 Preferred Pro Full-size Keyboard - 104 Keys, business black 4- 73P2620 USB Keyboard Enhanced Performance Keyboard - US English- 06P4069 USB Optical Wheel Mouse- 28L3673 Sleek 2-Button Mouse, business blackOther Accessories- 05K9276 USB Portable Diskette DriveNote: Refer to the Rack Cabinets and Options section for information concerning IBMracks and rack-supported devices.1. Rack kit is 24in deep2. USB accessories are not compatible with the NetBay console switches. They attach to a singleUSB-capable server.3. Installation within a rack requires an optional keyboard tray (P/N 28L4707) or a monitorconsole kit.4. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboardcannot share a keyboard tray with a flat panel display.Chapter 10. xSeries 236 93


xSeries 236 Tape OptionsSBB NumberOptionNumberTape DrivesBaysSupported 1StorageInterfaceForm FactorExt TapeEncl71P9176 71P9145 36/72GB DDS/5 Internal SCSI TapeDrive1, 2 Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH-71P9166 59P6746 80/160GB VXA-2 SCSI Tape Drive 1, 2 Ultra2 (16-bit) 133mm (5.25in) HH 45591UX- 59P6717 100/200GB LTO Tape Drive 1, 2 Ultra2 (16-bit) 133mm (5.25in) HH -- 59P6745 80/160GB DLT VS160 SCSI Tape Drive 1, 2 Ultra160(16-bit)133mm (5.25in) HH45591UX- 00N8016 100/200GB LTO Tape Drive 1 + 2 Ultra2 (16-bit) 133mm (5.25in) FH -- 59P6736 160/320GB SDLT SCSI Tape DriveOption1 + 2 Ultra2 (16-bit) 133mm (5.25in) FH -- 59P6744 200/400GB LTO Full-High Tape Drive 1 + 2 Ultra2 (16-bit) 133mm (5.25in) FH -Tape Autoloaders- 360716X 3607 Series 1760GB/3.5TB SDLTproTape Autoloader- 360726X 3607 Series 1.6TB/3.2TB LTO TapeAutoloader- Ultra2 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -External Tape Enclosures- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160(16-bit)1U Rack -- 4559HHX Half-High Tape Enclosure - Ultra160(16-bit)- 4559FHX Full-High Tape Enclosure - Ultra160(16-bit)Desktop or RackShelf (2.52in tall)Desktop or RackShelf (4.41in tall)--Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. Installation may require removing a standard device.94 Configuration and Options Guide


Chapter 11. xSeries 255xSeries 255 At-A-GlancePart Number 1, 2Processor/FSB Speed (GHz/MHz) 3Number of Processors (Std/Max)L3 CacheMemory (Std/Max) 4Form FactorPower Supply Quantity (Std/Max)Hot-Swap (Power, Slots, HDD, Fans)Redundant (Optional, Standard)System Management ProcessorOnboard EthernetStorage ControllerRemovable Media Bays (Total/Avail)Internal HDD Storage (Std/Max) 5CD-ROM (IDE)Bays (Total/Avail) 6Slots (Total/Avail)8685-71X 2/400 1/4 1MB 512MB/24GB Tower 2/4 P, S,H, FS-FansO-PowerY 1Gb DualU1604/2 0/1761.6GB 48x-20x 16/14 7/78685-7RX 2/400 1/4 1MB 512MB/24GB Rack (7U) 2/4 P, S,H, FS-FansO-PowerY 1Gb DualU1604/2 0/1761.6GB 48x-20x 16/14 7/78685-A1X 2.2/400 1/4 2MB 512MB/24GB Tower 2/4 P, S,H, FS-FansO-PowerY 1Gb DualU1604/2 0/1761.6GB 48x-20x 16/14 7/78685-ARX 2.2/400 1/4 2MB 512MB/24GB Rack (7U) 2/4 P, S,H, FS-FansO-PowerY 1Gb DualU1604/2 0/1761.6GB 48x-20x 16/14 7/78685-B1X 2.7/400 1/4 2MB 1GB/24GB Tower 2/4 P, S,H, FS-FansO-PowerY 1Gb DualU1604/2 0/1761.6GB 48x-20x 16/14 7/78685-BRX 2.7/400 1/4 2MB 1GB/24GB Rack (7U) 2/4 P, S,H, FS-FansO-PowerY 1Gb DualU1604/2 0/1761.6GB 48x-20x 16/14 7/78685-C1X 3/400 1/4 4MB 1GB/24GB Tower 2/4 P, S,H, FS-FansO-PowerY 1Gb DualU1604/2 0/1761.6GB 48x-20x 16/14 7/78685-CRX 3/400 1/4 4MB 1GB/24GB Rack (7U) 2/4 P, S,H, FS-FansO-PowerY 1Gb DualU1604/2 0/1761.6GB 48x-20x 16/14 7/71. Tower models ship standard with keyboard and mouse. See Power and Accessories section for tower-to-rack conversion kit.2. Rack models are housed in a 19in rack-mountable drawer and ship standard without a keyboard or mouse. See Rack Cabinets and Options sectionfor supported IBM racks.3. Intel Xeon MP processor with integrated full-speed ECC L3 cache and 400MHz (quad-pumped) access to memory and I/O buses.4. Advanced Chipkill ECC memory, supporting two and four-way interleaving and hot-spare configurations. Maximum memory is based on 12 2GBDIMMs.5. Maximum internal HDD storage capacity is based on 12 hot-swap 146.8GB HDDs, which requires the optional 6-pack Ultra320 Hot-swap ExpansionKit. Both the standard and optional hot-swap HDD backplanes are Ultra320. The integrated controller is Ultra160.6. Total number of bays includes the standard bays plus six additional bays provided by installation of the optional 6-pack Ultra320 Hot-swap ExpansionKit.xSeries 255 Processor OptionsSBBNumberOptionNumberProcessor OptionsSMPSupport 190P0017 73P8805 2.0GHz/400MHz-1MB L3 Cache Upgrade with Xeon Processor MP 7xX26K5912 13N0747 2.2GHz/400MHz-2MB L3 Cache Upgrade with Xeon Processor MP AxX26K5913 13N0746 2.7GHz/400MHz-2MB L3 Cache Upgrade with Xeon Processor MP BxX26K5914 13N0745 3.0GHz/400MHz-4MB L3 Cache Upgrade with Xeon Processor MP CxX1. Three additional processors may be installed, providing a maximum of four. All processors must be identicalin type, speed, and cache size. See diagram for order of installation.95


frontCPU1 CPU2CPU4 CPU3rearTop view of x255 planarxSeries 255 Memory OptionsSBBNumberOptionNumberMemory Description 1, 225P2754 33L3281 256MB PC1600 ECC DDR SDRAM RDIMM25P2755 33L3283 512MB PC1600 ECC DDR SDRAM RDIMM33L3186 33L3285 1GB PC1600 ECC DDR SDRAM RDIMM73P2574 33L3287 2GB PC1600 ECC DDR SDRAM RDIMM 31. To support two-way interleaving, optional DIMMs must be installed in pairs up to a maximum ofsix DIMMs including the standard DIMMs. To support four-way interleaving, the first two optionalDIMMs are installed to complete one four-way set, then the next two sets are installed, each of whichincludes four matching DIMMs. All DIMMs in a set must be the same density and technology, but thesets are not required to match other sets. Four-way interleaving provides improved performance benefitsover two-way interleaving. Chipkill support is provided on the memory card. See DIMM order ofInstallation table below.2. Hot-spare memory is supported for both two and four-way interleaving.3. When 2GB DIMMs are installed, the BIOS and diagnostic firmware must be later than version 1.02.D1D2D3D4D5D6D7D8D9D10D11D12x255 memory riser cardDIMM Order of Installation and Hot Spare Memory ConfigurationInterleaving DIMM Set Quantity ofDIMMsBankSpareMemory 122-way D2, D8 2 3 -2-way D4, D10 4 2 Bank 32-way D6, D12 6 1 Bank 324-way D1, D2, D7, D8 4 3 -4-way D3, D4, D9, D10 8 2 Bank 34-way D5, D6, D11, D12 12 1 Bank 396 Configuration and Options Guide


Refer to the Important Notices section for important notices1. Two DIMMs installed in D2 and D8 are standard in base models with two-way interleaving enabled.If two-way interleaving is maintained, then a pair of DIMMs can be installed in D4 and D8and two more in D6 and D12. If four-way interleaving is enabled, DIMMs must be added in D1 andD7 to complete Bank 3, then four DIMMs are added in Bank 2 and four more DIMMs can be addedin Bank 1.2. If Hot Spare Memory is enabled by the system BIOS, memory bank 3 is used as a spare bank in theevent of DIMM failure. Bank 3 serves as a hot spare for both banks 1 and 2. Hot Spare Memory doesnot apply when only two DIMMs are installed or when only four DIMMs are installed with fourwayinterleaving. Hot Spare Memory is not addressable by the CPU until activated. Memory densityand technology must be the same in both the active and spare banks.xSeries 255 Internal SCSI CablingThe xSeries 255 contains 10 standard bays with the option of adding an additional six HDD bays. The sixstandard slim-line hot-swap HDD bays are located on the upper left half of the front of both tower and rackmodels. Four removable media bays are located on the right-side front of the chassis. The top bay containsthe standard floppy disk drive and the second bay from the top contains the standard CD-ROM drive. Theremaining two removable media bays support tape or optical drive options.The standard Ultra320 hot-swap backplane supports six hot-swap HDD bays. The backplane is connectedto the integrated dual-channel, Ultra160 SCSI controller through a standard 16-bit LVD SCSI cable. Ifinternal RAID support is required, this cable can be used to connect the backplane to a supported RAIDcontroller. A second optional hot-swap backplane with six hot-swap HDD bays is supported for installationdirectly below the standard backplane. The optional backplane can be configured as an independent SCSIbus with the addition of an optional SCSI storage controller or it can be configured with the six standardhot-swap HDD bays by connecting each of the hot-swap backplanes to separate connectors of a two- orfour-channel RAID controller. The optional backplane cannot be connected to the integrated SCSI controllerif the standard backplane remains connected, and there is no accommodation for connecting the twobackplanes directly.Supported internal tape drives include a 34-inch terminated SCSI cable for connecting optional tape drivesto either a supported SCSI controller or to channel A of the integrated SCSI controller if the hot-swapbackplane is connected to an optional controller. The standard CD-ROM is cabled to the IDE port on theplanar through a two-drop IDE cable.External attachment of supported SCSI devices requires installation of the optional External SCSI InterfaceKit (P/N 32P8164), which provides a SCSI cable with an external 0.8mm VHDCI connector that attaches tothe rear of the chassis and connects at the other end to the 68-pin connector of channel B on the planar.Chapter 11. xSeries 255 97


xSeries 255 Hard Disk Drive (HDD) StoragexSeries 255 Hard Disk Drive (HDD) StorageSBBNumberOptionNumberDescription Height BaysSupported 1MaximumQuantity 1Hot-swap Ultra320 HDDs 232P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 12 1232P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 12 1232P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 12 1232P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 12 1232P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 12 12Associated Options32P1945 32P8163 36-pack Ultra320 Hot-swap Expansion Kit - 6 ... 12 133P3129 32P8164 External SCSI Interface Kit 4 - - 1Optical Devices 5BaysSupported25P5573 22P6950 616x Max RAM-Read DVD-ROM Drive A, B, CExternal Storage Expansion Units 7Form Factor- 17331RU EXP400 Storage Expansion Unit Rack (3U)- 09N7296 EXP Rack-to-Tower Conversion Kit 8 -- 171010U FAStT EXP100 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 172260U FAStT600 Storage Server (US line cord, English pubs) Rack (3U)- 17226LU FAStT600 Entry Storage Server Rack (3U)- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)- 35421RU 9FAStT200 Storage Server Rack (3U)- 35422RU FAStT200 HA Storage Server Rack (3U)- 19K1121 FAStT200 Redundant RAID Controller -- 1724100 FAStT100 Storage Server Rack (3U)1. Maximum quantity requires installation of 6-pack Ultra320 Hot-swap Expansion Kit (P/N 32P8163), which supports bays seven through12.2. xSeries 255 contains an Ultra320 hot-swap backplane connected to an integrated Ultra160 storage controller. In order to support Ultra320speeds, an Ultra320 storage controller must be installed.3. xSeries 6-pack Ultra320 Hot-swap Expansion Kit is used to provide an additional hot-swap backplane supporting a single SCSI channelwith up to six HDDs.4. Required to enable a 0.8mm VHDCI external connector for external SCSI attachment to the second channel of the integrated controller.Refer to Appendix D: Cables - Storage Units - Controllers for additional information.5. Standard optical drive is installed in Bay A.6. Audio and video are not supported for DVD-ROM drives. The drive reads data signals only.7. Not supported by the onboard external SCSI port. To configure an external SCSI storage devices, select an optional SCSI controller thenrefer to Appendix D: Cables - Storage Units - Controllers to confirm that the controller supports the desired External Storage ExpansionUnit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section. For Fibre Channelstorage devices, refer to the Fibre Channel Solutions Overview section.8. To convert an EXP Storage Unit to a tower form factor the EXP Rack-to-Tower Conversion Kit is required.9. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).98 Configuration and Options Guide


Refer to the Important Notices section for important noticesBay Form Factor Height Front Access Usage- 89mm (3.5in) SL Yes FDDRM A 133mm (5.25in) HH Yes CD-ROMRM B 133mm (5.25in) HH 1YesOpenRM C 133mm (5.25in) 1HH Yes Open(1 ... 12) 2HS SL Yes OpenNote: Install HDDs in the same order as bays are numbered, i.e., bays one to 12.1. Two half-high (HH) bays can be combined to support a single full-high (FH) device.2. Optional 6-pack Ultra320 Hot-swap Expansion Kit (P/N 32P8163) is required to support bays seventhrough 12.1 2 3 4 5 6FDDRM A:CD-ROMRM B7 8 9 10 11 12RM CxSeries 255 front viewThe following table does not represent all possible HDD configurations. Total internal storage listed iswithin +/-0.2GB unless otherwise noted.Chapter 11. xSeries 255 99


xSeries 255 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCI Support 1SlotsSupported 1Hot-Plug 2Storage Controllers 302R0996 02R0988 ServeRAID-6M Controller (256MB Cache) 4Full 64-bit/133MHz 1... 7 -02R0995 32P0033 4ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 1... 7 -24P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit/66MHz 3, 4 5 X24P2650 19K4646 PCI Wide Ultra160 SCSI Adapter Half 64-bit/66MHz 1... 7 -Internal RAID Cable02R2046 02R2068 Ultra320 Internal Single-drop 24in LVD SCSI Cable 4 - - - -Fibre Storage Controllers and Options 624P2334 00N6881 FAStT Host Adapter Half 64-bit/66MHz 1... 7 X24P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 1... 7 X- 174290U FAStT900 Storage Server (US line cord) - - - -- 17421RU FAStT700 Fibre Channel Storage Server - - - -- 172260U FAStT600 Storage Server (US line cord, English pubs) - - - -- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 1724100 FAStT100 Storage Server - - - -- 2034212 McDATA Sphereon 4300 Fabric Switch Model 212 - - - -- 2005H08 TotalStorage SAN Fabric Switch Model H08 - - - -- 2005H16 TotalStorage SAN Fabric Switch Model H16 - - - -- 3534F08 TotalStorage SAN Switch F08, 8-port - - - -- 2109F16 SAN Fibre Channel Switch, 16-Port - - - -Networking 731P9605 31P9601 PRO/1000 MT Server Ethernet Adapter by Intel Half 64-bit/133MHz 1 ... 7 X32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit/133MHz 1 ... 7 X31P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) 8 Half 64-bit/66MHz 1 ... 7 X32P9298 31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter (copper) 8 Half 64-bit/133MHz 1 ... 7 X25P2889 06P3601 10/100 Ethernet Server Adapter Half 32-bit 1 ... 7 XOther I/O 932P8862 33L4618 10V.90 PCI Data/Fax Modem Half 32-bit/33MHz 1 -- 1519100 Integrated xSeries Adapter for iSeries 11 Full 64-bit/66MHz 2 10System Management02R1676 59P2984 12Remote Supervisor Adapter II Half 32-bit/33MHz 1 -1. The 5v slots support universal or 5v adapters. The 3.3v slots support universal or 3.3v adapters. A higher frequency adapter plugged into alower frequency slot will operate at the slot frequency. A lower frequency (e.g., 33MHz) adapter plugged into a higher frequency (e.g., 66MHz)slot limits other adapters installed on the same bus to the lower frequency. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bitrates. 133MHz PCI-X adapters are backward compatible with 33/66MHz, 64-bit PCI-based servers.2. Slots two through seven are hot-plugable. For Network Operating System support access www.pc.ibm.com/us/compat.3. All models include a dual-port, dual-channel, 64-bit Wide Ultra160 SCSI controller with one internal connector connected to the standard hotswapbackplane with a standard Ultra160 SCSI cable. The second connector supports one external port, which is enabled by installing an ExternalSCSI Interface Kit (P/N 32P8164) with a 0.8mm VHDCI connector.4. Cable option 02R2068 is required when connecting internal HDDs to ServeRAID-6M adapters.100 Configuration and Options Guide


Refer to the Important Notices section for important notices5. If a second ServeRAID-4Lx is to be installed, it should be installed in slot 3 or 4.6. See Fibre Channel Solutions Overview section for additional configuration information.7. xSeries 255 includes an integrated copper Broadcom 10/100/1000Mbps Ethernet controller, which supports Wake on LAN.8. The Wake on LAN function of this option is not supported by this server.9. xSeries 255 includes four USB ports, one external serial port and two integrated RS-485 system management interconnect ports located on theback of the system chassis. Connection of the standard service processor to other servers in an interconnect network requires a customer-suppliedCat5 cable.10. The Integrated xSeries Adapter for iSeries allows interconnectivity with an IBM eServer iServer server. This card occupies two slot positions.It is restricted to slot two. Remote Supervisor Adapter I or II must also be installed.11. Due to homologation variances, modem availability may differ by country.12. Connection of the external AC power supply provided with the option is not required.External VHDCISCSI portslot 1slot 2slot 3slot 4slot 5slot 6slot 7xSeries 255 rear viewSlot 1: Bus A, 33MHz, 32-bit, 5v, full-lengthSlot 2: Bus B, 100MHz, 64-bit, 3.3v, full-length, Active PCI-XSlot 3: Bus B, 100MHz, 64-bit, 3.3v, full-length, Active PCI-XSlot 4: Bus C, 100MHz, 64-bit, 3.3v, full-length, Active PCI-XSlot 5: Bus C, 100MHz, 64-bit, 3.3v, full-length, Active PCI-XSlot 6: Bus D, 100MHz, 64-bit, 3.3v, full-length, Active PCI-XSlot 7: Bus D, 100MHz, 64-bit, 3.3v, full-length, Active PCI-XChapter 11. xSeries 255 101


xSeries 255 Power and AccessoriesSBBNumberOptionNumberDescriptionPower 148P7713 31P6133 370w Reversed Fan Hot-swap Redundant Power Supply- 21301TX UPS750TLV- 21302TX UPS750THV- 21303TX UPS1000TLV- 21304TX UPS1000THV- 21305TX UPS1500TLV- 21306TX UPS1500THV- 32P1020 APC 2U Smart-UPS 1400RMB- 2130R30 UPS3000XLV 3- 2130R31 UPS3000XHV 3- 32P1692 UPS Extend Run Battery Pack 3- 37L6861 APC Smart-UPS 5000RMB 4Tower Uninterruptible Power Supply (UPS) 2Rack-mount Uninterruptible Power SupplyMonitors 5- 17231UX 1U Flat Panel Monitor Console Kit (with US Space Travel keyboard) 6- 17231NX 1U Flat Panel Monitor Console Kit (without keyboard) 6- 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 7- 63324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black 8- 32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 9- 32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 9- 6734HB0 L170p ThinkVision 17in LCD Flat Panel Monitor (432mm, 17in viewable image),business black- 6636AB1 L150 ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image),business black- 6636HB1 L150p ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image),business black1. xSeries 255 includes two 370w hot-swap power supplies with the ability to accept two additional 370w ReversedFan Hot-swap Redundant Power Supplies (P/N 31P6133). Each power supply bus in rack models includesan IEC 9ft rack power cable (P/N 36L8886) for attachment to NetBAY Rack Plus and high voltage UPSunits. The US country kit for rack models includes two NEMA 5-15P cords (P/N 6952300) for connection to alow voltage UPS, low voltage PDU or wall outlet. Tower models ship with two 1.8m NEMA 5-15P cords (P/N6952301). Each of the two standard power supplies is installed on a separate bus. Installation of one optionalpower supply on each bus is required to achieve full power redundancy. Additional power cords are not used.2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.3. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.4. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.5. xSeries 255 uses an integrated ATI Rage XL video controller with 8MB of memory.6. Includes a 17in Flat Panel Monitor.7. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).8. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) andNetfinity Rack Keyboard Tray (P/N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboardtray.9. Includes a 15in Flat Panel Monitor102 Configuration and Options Guide


Refer to the Important Notices section for important noticesSBBNumberOptionNumberDescriptionConversion Kits- 32P1474 7Ux26D Tower-to-Rack KitRack and NetBAY 1Refer to the Rack Cabinets and Options section for information concerning IBMracks and rack-supported devices.- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion Option- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 2x8 Console Switch32P8917 28L3644 Space Saver II Keyboard 4, 5Console Connectivity 2Keyboard and Mouse 302R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys, business black 632P4092 28L3673 Sleek 2-Button Mouse, business black1. xSeries 255 rack models are housed in a 19in rack-mountable drawer and require one of the racks listed in theRack Cabinets and Options section.2. Refer to the Rack Console Options section for information regarding console connectivity using these options.3. xSeries 255 rack models ship without a keyboard or mouse.4. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in ready-to-use position,or NetBAY 2U Flat Panel Monitor Console Kit. Standard with 2U NetBAY console kits.5. Advanced TrackPoint IV features are not available on IBM xSeries systems.6. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboardtray with a flat panel display.Chapter 11. xSeries 255 103


xSeries 255 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupportedStorageInterfaceForm FactorExt TapeEnclosures 132P8861 00N7991 20/40GB DDS/4 4mm Internal TapeDrive 2B, C Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH-71P9187 59P6745 80/160GB VS160 SCSI Tape Drive B, C Ultra2 (16-bit) 133mm (5.25in) HH -49P3225 00N8016 100/200GB LTO Tape Drive B+C Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X24P7303 59P6736 160/320GB SDLT Tape Drive B+C Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X71P9165 59P6744 200/400GB LTO Full-High Tape Drive B+C Ultra2 (16-bit) 133mm (5.25in) FH 3503B1XTape Autoloaders- 00N7992 120/240GB DDS/4 Tape Autoloader B+C Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X- 36232LX 200/400GB 2U LTO Generation 2 TapeAutoloader 3623 Model 2LX- 360716X 3607 Series 1760GB/3.5TB SDLTproTape Autoloader- 360726X 3607 Series 1.6TB/3.2TB LTO TapeAutoloader- Ultra160 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- 18P9133 TotalStorage Ultrium LVD Tape Drive3580 Model L23- 3581L28 TotalStorage Ultrium LVD Tape 2UAutoloader 3581- 3581F28 TotalStorage Ultrium Fibre Tape 2UAutoloader 3581External Tape Enclosures- Ultra160 (16-bit) Stand-alone or 5U Rack 3- Ultra160 (16-bit) Stand-alone or 2U Rack 3- 2Gb Fibre Channel Stand-alone or 2U Rack 3-- 3503B1X Full-High SCSI Tape Enclosure 4- Ultra2 (16-bit) Desktop or 3U Rack -- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160 (16-bit) 1U Rack -External Tape Libraries 5- 18P9212 TotalStorage Ultrium LVD Tape Library3582 Model L23 6- Ultra160 (16-bit) Stand-alone or 4U Rack 7-- 18P9337 TotalStorage Ultrium Fibre Tape Library3582 Model F23 6 - 2Gb Fibre Channel Stand-alone or 4U Rack 7 -Associated Options33P3129 32P8164 External SCSI Interface Kit 8- Ultra2 (16-bit) - -Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. To determine external cable requirements, note the tape drive’ s SCSI interface, the appropriate SCSI controller from the system configuratorsection and the desired enclosure, then refer to Appendix D: Cables - Storage Units - Controllers.2. The standard internal media power cable is not long enough to connect to this tape drive in xSeries 255. An optional longer media power cableis available (FRU# 24P1054).3. Rack mount requires an optional rack kit. See tape drive appendix for more information.4. An external cable is included. Requires a fixed shelf if installed in a rack (allow an additional 1U in rack for fixed shelf).5. Tape library attributes and options are located in the tape library appendix.6. External cables are not included.7. Rack mount kit is standard. Stand-alone kit is optional. See tape drive appendix for more information and options.8. Required to connect one channel of the integrated SCSI controller to the 0.8mm VHDCI external port, which cannot be enabled if both channelsof the integrated controller are connected internally. If both SCSI channels are being used for internal use, an optional SCSI controller is requiredto support external SCSI tape attachment.104 Configuration and Options Guide


Chapter 12. xSeries 306xSeries 306 At-A-GlancePart Number 1, 2Processor/FSB Speed (GHz/MHz) 3Number of Processors (Std/Max)CacheMemory (Std/Max) 4Form FactorHot-Swap (Power, Slots, HDD, Fans)Storage Controller 5Internal HDD InterfaceInternal HDD Storage (Std/Max) 6CD-ROM (IDE)Bays (Total/Avail)Slots (Total/Avail)8836-1Mx 2.8/800 1/1 1MB L2 512MB/4GB Rack (1U) - U320 Fixed 36.4GB/293.6GB 24x-10x 4/1 2/28836-1Sx 2.8/800 1/1 1MB L2 512MB/4GB Rack (1U) - SATA Simple-swap 0GB/320GB 24x-10x 4/2 2/28836-2Mx 3.0/800 1/1 1MB L2 512MB/4GB Rack (1U) - U320 Fixed 36.4GB/293.6GB 24x-10x 4/1 2/28836-2Sx 3.0/800 1/1 1MB L2 512MB/4GB Rack (1U) - SATA Simple-swap 0GB/320GB 24x-10x 4/2 2/28836-3MY 3.2/800 1/1 1MB L2 512MB/4GB Rack (1U) - U320 Fixed 36.4GB/293.6GB 24x-10x 4/1 2/28836-3SY 3.2/800 1/1 1MB L2 512MB/4GB Rack (1U) - SATA Simple-swap 0GB/320GB 24x-10x 4/2 2/28836-4MY 773.2/800 1/1 1MB L2 512MB/4GB Rack (1U) - U320 Fixed 36.4GB/293.6GB 24x-10x 4/1 2/28836-4SY 7 73.2/800 1/1 1MB L2 512MB/4GB Rack (1U) - SATA Simple-swap 0GB/320GB 24x-10x 4/2 2/2Note: Model numbers provided are worldwide generally available variant (GAV) model numbers which are not orderable as listedand need to be modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S.orderable part number for 8836-1Mx is 8836-1MU. See the product specific Official IBM announcement letter for other country-specificGAV model numbers.1. xSeries 306 is housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. This system also provides dual integratedIntel gigabit Ethernet controllers (WOL, ASF 2.0), four USB ports (two front/two rear), one RS-232 serial port, an integrated ATI 7000Mvideo controller with 16MB of memory, supports a single 300w power supply, and comes with a one year parts and labor warranty.2. GAV to MTM mapping for L.A. and A.P. Geographies: 1Mx --> 11X, 1Sx --> 15X, 2Mx --> 21X, 2Sx --> 25X, 3MY --> 31X, 3SY --> 35X, 4MY -->41X, 4SY --> 45X. L.A. and A.P. models 3xX and 4xX will need the last digit (X) substituted with a country-specific designator. For example, Model31X may become 31L.3. Unless footnoted otherwise, models ship with Intel Pentium 4 processors with advanced transfer L2 cache and 800MHz Front-side Bus (FSB).4. Models with 3.0GHz CPU or below, ship with PC2700 ECC DDR unbuffered DIMMs. Models with a 3.2GHz CPU ship with PC3200 ECC DDRunbuffered DIMMs.5. Integrated single channel Ultra320 SCSI storage controller on SCSI models, two SATA controllers on SATA models supporting one HDD percontroller. Both the SCSI and SATA integrated controllers support Integrated ServeRAID-7e (RAID-0 and RAID-1).6. Maximum capacity for SCSI models is based on two 146.8GB hot-swap SCSI HDDs. Maximum capacity for SATA models is based on two 160GBSATA HDDs.7. Intel Pentium 4 processor with Extended Memory 64 Technology (EM64T), L2 cache and an 800MHz Front-side Bus (FSB).105


xSeries 306 Memory OptionsSBBNumberOptionNumberMemory Description 1, 274P5096 06P4053 256MB PC2700 ECC DDR DIMM74P5097 06P4054 512MB PC2700 ECC DDR DIMM74P5098 06P4055 1GB PC2700 ECC DDR DIMM74P5112 06P4049 256MB PC3200 ECC DDR DIMM74P5113 06P4050 512MB PC3200 ECC DDR DIMM74P5114 06P4051 1GB PC3200 ECC DDR DIMMNote: All DIMM options are unbuffered DIMMs.1. A maximum of 4GB of memory is supported via 4 DIMM slots.2. A single DIMM configuration is valid if installed in socket DIMM 1. Otherwise,DIMMs must be configured in matched pairs starting with DIMMsockets 1 and 3, then 2 and 4. Single DIMM models require the standardDIMM either be matched or removed, before adding additional memory inpairs. PC2700 and PC3200 DIMMs can coexist in the same system if the memoryconfiguration/installation rules are followed (i.e., matched pairs). However,all memory will operate at the lowest installed speed.Model1Mx, 1Sx, 2Mx, 2Sx3MY, 3SY, 4MY, 4SYStd. DIMM Configuration1 x 512MB PC2700 ECC DDR DIMM1 x 512MB PC3200 ECC DDR DIMMPCI-X Riser Card ConnectorDIMM1 .. DIMM4106 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 306 Internal CablingFixed (Nonhot-swap) SCSI ModelsxSeries 306 fixed SCSI models are cabled internally with a single, 2-drop (68-pin), terminated, 16-bit LVDSCSI cable, connecting the SCSI controller to installed HDDs.Simple-swap SATASimple-swap SATA models provide two point-to-point SATA cables supporting one SATA HDD each.All models provide a single ATA-100 IDE connector cabled to the standard optical device via a single-dropIDE cable.xSeries 306 Hard Disk Drive (HDD) and Optical Storage OptionsSBBNumberOptionNumberDescription Height BaysSupported 1MaximumQuantitySimple-swap SATA HDDs 202R8747 73P8002 80GB 7200 rpm Simple-swap SATA HDD SL 3, 4 202R8748 73P8003 160GB 7200 rpm Simple-swap SATA HDD SL 3, 4 2Fixed (Nonhot-swap) Ultra320 HDDs 232P0753 32P0723 36.4GB 10K rpm Ultra320 SCSI HDD SL 3, 4 232P0751 32P0784 36.4GB 15K rpm Ultra320 SCSI HDD SL 3, 4 232P0754 32P0724 73.4GB 10K rpm Ultra320 SCSI HDD SL 3, 4 232P0752 32P0785 73.4GB 15K rpm Ultra320 SCSI HDD SL 3, 4 232P0755 32P0725 146.8GB 10K rpm Ultra320 SCSI HDD SL 3, 4 2Optical Devices 3External Storage Expansion Units 4FormFactor- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)1. Audio not supported for DVD-ROM drives. The drive provides data input/output only.2. Mixing of different HDD technologies is not supported.3. The xSeries 306 ships standard with a slim high 24x-10x CD-ROM drive.4. May require removing standard devices.Bay Form Factor Height Front Access Usage1 133mm (5.25in) Slim yes Std.Optical2 89mm (3.5in) SL yes Std. FDD3 89mm (3.5in) SL yes Std. HDD 14 89mm (3.5in) SL yes HDDNote: Install first HDD in bay three.1. Standard HDD on nonopen-bay models is installed in bay 3.Chapter 12. xSeries 306 107


USB connectorsBAY 1 BAY 2BAY 3 BAY 4xSeries 306 front viewxSeries 306 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCI Support 1SlotsSupportedStorage Controllers 113N2194 13N2190 ServeRAID-6i+ Controller Half 64-bit/133MHz 124P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller 2Half 64-bit/66MHz 271P8651 71P8648 ServeRAID-7t SATA RAID Controller Half 64-bit/66MHz 171P8614,71P8612 371P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz 1, 224P2650 19K4646 PCI Wide Ultra160 SCSI Adapter Half 64-bit/66MHz 1, 2Fibre Storage Controllers and Options 424P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 1, 2- 3534F08 TotalStorage SAN Switch F08, 8-port - - -- 2109F16 SAN Fibre Channel Switch, 16-port - - -Networking 525P2889 06P3601 10/100 Ethernet Server Adapter Half 32-bit/33MHz 231P9605 31P9601 PRO/1000 MT Server Adapter by Intel Half 64-bit/133MHz 1, 232P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit/133MHz 1, 231P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) Half 64-bit/133MHz 1, 2System Management02R1676 59P2984 Remote Supervisor Adapter II Half 32-bit/33MHz 21. xSeries 306 SCSI models ship with single channel, Ultra320 SCSI Controller installed in a dedicated mini-PCI slot. SATA models shipwith two integrated SATA controllers. Both the SCSI and SATA controllers support Integrated ServeRAID-7e (RAID-0 and RAID-1).2. Supported for external connections only.3. SBB 71P8614 contains an ATX bracket. SBB 71P8612 contains a low-profile bracket.4. See the Fibre Channel Solutions Overview section for additional configuration information.5. xSeries 306 includes dual integrated copper-based, full-duplex, Intel gigabit Ethernet controllers (82547GI and 82541GI).108 Configuration and Options Guide


Refer to the Important Notices section for important noticesSlot 1: Bus 03, 66MHz, 64-bit, half-length, low-profile, 3.3v, PCI-XSlot 2: Bus 03, 66MHz, 64-bit, three-quarter length, full-high, 3.3v, PCI-XPCI scan sequence: 2, 1, integrated SCSIxSeries 306 rear viewxSeries 306 Power and AccessoriesOption Number Power 1Rack-mount Uninterruptible Power Supply (UPS) 232P102032P10222130R302130R31APC 2U Smart-UPS 1400RMBAPC 2U Smart-UPS 1400 RMiBUPS3000XLVUPS3000XHV37L6861 APC Smart-UPS 500037L686232P1692APC Smart-UPS 5000RMiBUPS Extend Run Battery Pack1. The xSeries 306 includes a 300w voltage sensing power supply with a single line cord.2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.Chapter 12. xSeries 306 109


SBBNumberOptionNumberDescriptionRack Console Connectivity 1- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 2x8 Console Switch- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion Option- 73P5832 USB Conversion Option (four-pack) 2Monitors- 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 3- 63324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black 3- 6636AB1 ThinkVision L150 15in LCD Flat Panel Monitor, (381mm, 15in viewable image),business black- 17231UX 1U Flat Panel Monitor Console Kit (with US Space Travel keyboard) 4- 17231NX 1U Flat Panel Monitor Console Kit (without keyboard) 4- 32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 5- 32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 532P8917 28L3644 Space Saver II Keyboard 7Keyboard and Mouse 602R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys business black 802R3421 28L3673 Sleek 2-button Mouse, business black13M7124 06P4069 USB Optical Wheel Mouse- 05K9276 USB Portable Diskette DriveOther AccessoriesNote: Refer to the Rack Console Options section for information concerning IBM racks and racksupporteddevices.1. Refer to the Rack console Options section for information regarding console connectivity using these options.2. Required to connect one of the USB ports on the server to either a Local or Remote Console Manager. Thisoption kit contains four 1.5m USB conversion option cables, four 14in lengths of Cat5 cable, four large curly-lockcable connectors and an eight-pack of velcro strips.3. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).4. Includes a 17in Flat Panel Monitor.5. Includes a 15in Flat Panel Monitor.6. xSeries 306 models ship standard with a mouse and full-size keyboard.7. Installation within a rack requires an optional keyboard tray (P/N 28L4707) or a monitor console kit.8. Installation within a rack requires an optional keyboard tray (P/N 28:4707). This keyboard cannot share a keyboardtray with a flat panel display.110 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 306 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupported 1StorageInterfaceForm FactorExt TapeEnclosures 132P8861 00N7991 20/40 GB DDS/4 4mm Internal TapeDrive71P9176 71P9145 36/72GB DDS/5 Internal SCSI TapeDrive- Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH- Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH351002035100200034B0X71P9187 59P6745 80/160GB VS160 SCSI Tape Drive - Ultra2 (16-bit) 133mm (5.25in) HH 351002071P9166 59P6746 80/160/GB VXA-2 SCSI Tape Drive - Ultra2 (16-bit) 133mm (5.25in) HH 35100200034B0X49P3225 00N8016 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 0034B0X- 59P6717 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) HH 0034B0X71P9165 59P6744 200/400GB LTO Full-High Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0XTape Autoloaders- 00N7992 120/240GB DDS/4 Tape Autoloader - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X- 36232LX 200/400GB 2U LTO Generation 2 TapeAutoloader 3623 Model 2LX- 360716X 3607 Series 1760GB/3.5TB SDLTproTape Autoloader- 360726X 3607 Series 1.6TB/3.2TB LTO TapeAutoloader- Ultra160 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- 18P9133 TotalStorage Ultrium LVD Tape Drive3580 Model L23External Tape Enclosures- Ultra160 (16-bit) Stand-alone or 5U Rack 2-- 0034B0X NetBAY Tape Enclosure (Rack Mount) 3- 3510020 External Half High SCSI StorageEnclosure 3, 4- 3503B1X Full-high SCSI Tape Enclosure 5- Ultra2 (16-bit) 4U Rack -- LVD (16-bit) Desktop -- Ultra2 (16-bit) Desktop or 3U Rack -External Tape Libraries 6- 18P9212 TotalStorage Ultrium LVD TapeLibrary 3582 Model L23 3 - Ultra160 (16-bit) Stand-alone or 4U Rack 7-- 18P9337 TotalStorage Ultrium Fibre Tape- 2Gb FibreLibrary 3582 Model F23 3 ChannelStand-alone or 4U Rack 7 -Associated Options-00N795668-pin External Multimode LVD/SESCSI Terminator- LVD/SE (16-bit) External 3510020Note: Hot-swap models do not support installation of a SCSI tape drive on the same bus that supports the hot-swap backplane.Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes andTape Library Attributes appendices, respectively.1. xSeries 306 does not support internal tape drives and does not include an external SCSI connector. An external tape library or internal tapedrive with a tape enclosure, supported SCSI adapter and appropriate cable must be selected. Select tape drive, enclosure and supported adapterthen use Appendix D: Cables - Storage Units - Controllers to select an appropriate external cable.2. Rack mount requires an optional rack kit. See tape drive appendix for more information.3. External cables are not included.4. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).5. An external cable is included. Requires a fixed shelf if installed in a rack (allow an additional 1U in rack for fixed shelf).6. Tape library attributes and options are located in the tape library appendix.7. Rack mount kit standard. Stand-alone kit is optional. See tape drive appendix for more information and options.Chapter 12. xSeries 306 111


112 Configuration and Options Guide


Chapter 13. xSeries 335xSeries 335 At-A-GlancePart Number 1Processor/FSB Speed (GHz/MHz)Number of Processors (Std/Max)CacheMemory (Std/Max) 2, 3Form FactorPower Supply Quantity (Std/Max) 4Hot-Swap (Power, Slots, HDD, Fans)Redundancy (Options, Standard)System Management ProcessorOnboard Ethernet 5Storage ControllerRemovable Media Bays (Total/Avail)Internal HDD Storage (Std/Max)CD-ROM (IDE)Bays (Total/Avail)Slots (Total/Avail)8676-L1X 3 2.8/533 61/2 512KBL2512MB/8GBRack(1U)1/1 H - Y 2 x 1Gb U320 72/0 0/293.6GB7 24x-10x 4/2 2/28676-L2X 3 62.8/533 1/2 512KBL2512MB/8GBRack(1U)1/1 - - Y 2 x 1Gb IDE 2/0 40GB/240GB 824x-10x 4/1 2/28676-LAX 3, 962.8/533 1/2 512KBL2512MB/8GBRack(1U)1/1 7 H - Y 2 x 1Gb U320 102/0 70/293.6GB 24x-10x 4/2 2/28676-M1X 3 63.06/533 1/2 512KBL2512MB/8GBRack(1U)1/1 H - Y 2 x 1Gb U320 11 2/0 70/293.6GB 24x-10x 4/2 2/28676-M2X 3 3.06/5336 1/2 512KBL2512MB/8GBRack(1U)1/1 - - Y 2 x 1Gb IDE 2/0 40GB/240GB8 24x-10x 4/1 2/28676-G1X 3.2/533 111/2 1MB L3 1GB/8GB Rack(1U)1/1 H - Y 2 x 1Gb U320 11 2/0 70/293.6GB 24x-10x 4/2 2/28676-G2X 113.2/533 1/2 1MB L3 1GB/8GB Rack(1U)8676-J1X 3.2/53311 1/2 2MB L3 1GB/8GB Rack(1U)8676-J2X 113.2/533 1/2 2MB L3 1GB/8GB Rack(1U)1/1 - - Y 2 x 1Gb IDE 2/0 880GB/240GB 24x-10x 4/1 2/21/1 H - Y 2 x 1Gb U320 2/0 0/293.6GB7 24x-10x 4/2 2/21/1 - - Y 2 x 1Gb IDE 2/0 880GB/240GB 24x-10x 4/2 2/21. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See Rack Cabinets and Options section for supportedIBM racks.2. Two-way interleaved, high-speed PC2100 266MHz ECC DDR RDIMMs.3. x335 models LxX and MxX ship with non-Chipkill 256MB DIMMs whereas the other 512MB models ship with Chipkill 256MB DIMMs.4. A single 332w power supply is standard. Redundancy and hot-swap are not supported.5. Broadcom 5703 integrated dual gigabit Ethernet controllers.6. Intel Xeon processor with advanced transfer L2 cache and 533MHz (quad-pumped) FSB. Not compatible with 400MHz FSB models.7. Maximum capacity requires installing two 146.8GB SCSI HDDs. Mixing of Ultra320 and Ultra160 HDDs is supported, but the bus will operate atthe speed of the lowest rated HDD.8. Maximum capacity requires removing the standard IDE HDD and installing two 120GB IDE HDDs.9. Includes a -48v to -60v 332w DC power supply designed for telecommunications applications.10. The single-channel, Ultra320 integrated controller supports both Ultra160 and Ultra320 HDDs, but the entire SCSI bus will default to the slowerrate (MB/second) if HDDs of different technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocated for mirroringif a RAID adapter is not used to support the internal HDDs. Mirrored HDDs must match.11. Intel Xeon processor with advanced transfer L2 cache, an additional L3 cache and a 533MHz (quad-pumped) Front Side Bus (FSB).xSeries 335 Processor OptionsSBBNumberOptionNumberProcessor UpgradesSMPSupport 190P0584 73P6382 2.8GHz/533MHz-512KB L2 Cache Xeon Processor LxX73P8039 02R8959 3.06GHz/533MHz-512KB L2 Cache Xeon Processor MxX25K9986 13N0661 3.2GHz/533MHz-1MB L3 Cache Xeon Processor GxX25K5062 13N0662 3.2GHz/533MHz-2MB L3 Cache Xeon Processor JxX113


xSeries 335 Memory Options1. One additional processor may be installed, providing a maximum of two. All processors must beidentical in type, speed and cache size.SBB Number Part Number Memory Description 1, 273P2876 373P2868 3 512MB DDR PC2100 ECC RDIMM Kit 337L3538 33L5038 512MB DDR PC2100 ECC RDIMM33P3126 33L5039 1GB DDR PC2100 ECC RDIMM32P9223 33L5040 2GB DDR PC2100 ECC RDIMM1. Due to two-way interleaving, installation of memory options inpairs is required. Standard DIMMs are installed in sockets one andtwo. One DIMM pair is not required to match the other. Provides ErrorChecking and Correcting (ECC) via 16-bit Checksum Chipkill (corrects1, 2, 3, or 4-bit errors on the same chip and detects 2- through 8-bit errors contained in two chips).2. Chipkill is available in 512MB DIMMs and above. Installation of anon-Chipkill DIMM will disable all Chipkill function.3. The 512MB kit option contains two 256MB non-Chipkill DIMMs,whereas the SBB contains a single DIMM.RDIMM 4RDIMM 3RDIMM 2RDIMM 1CPU2CPU1Location of RDIMM sockets on planar front viewxSeries 335 Internal SCSI CablingEIDE ConfigurationsEIDE models include a standard CD-ROM drive attached to one connector of the IDE controller using asingle-drop IDE cable and the standard IDE HDD is attached to the other IDE connector using a standardtwo-drop IDE cable. One additional IDE HDD may be installed in the one available HDD bay, attaching tothe second drop of the standard two-drop IDE cable.SCSI ConfigurationsxSeries 335 hot-swap SCSI models support two hot-swap SCSI HDDs on a DASD backplane. The backplaneis connected to the integrated Ultra320 single-channel controller through a 16-bit nonterminated SCSI cable.Attachment of external SCSI devices require a supported optional SCSI PCI controller. The standard CD-ROM is attached to the IDE connector using a single-drop IDE cable.114 Configuration and Options Guide


Refer to the Important Notices section for important noticesRAID configurations are supported by the integrated LSI chipset, which provides onboard mirroring.Optional ServeRAID-4Lx or -4Mx controllers can be installed to support the internal HDDs, in which casethe standard cable would be used to attach the backplane to the RAID controller.xSeries 335 Hard Disk Drive (HDD) and Optical Storage OptionsSBBNumberOptionNumberDescription Height BaysSupportedMaximumQuantityIDE HDD 1, 249P2893 22P7157 40GB 7200 rpm ATA-100 (EIDE) HDD SL 1, 2 249P2895 09N4226 80GB 7200 rpm ATA-100 (EIDE) HDD SL 1, 2 202R2677 09N4231 120GB 7200 rpm ATA-100 (EIDE) HDD SL 1, 2 2Hot-swap Ultra320 HDDs 132P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-Swap HDD SL 1, 2 232P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-Swap HDD SL 1, 2 2External USB Drives- 05K9276 USB Portable Diskette Drive -- 33L5151 USB Portable CD-ROM Drive -Optical Devices59P5800 22P7047 8x Max Slimline DVD-ROM Drive 3External Storage Expansion Units 4BaysSupportedAForm Factor- 17331RU EXP400 Storage Expansion Unit Rack (3U)- 171010U FAStT EXP100 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)- 17226LU FAStT600 Entry Storage Server Rack (3U)- 35421RU FAStT200 Storage Server 5Rack (3U)- 35422RU FAStT200 HA Storage Server Rack (3U)- 19K1121 FAStT200 Redundant RAID Controller -- 1724100 FAStT100 Storage Server Rack (3U)1. Mixing of IDE and SCSI hard disk drives is not supported.2. IDE HDDs are supported only in IDE models.3. Requires removing and replacing the standard optical drive.4. xSeries 335 does not include an external SCSI connector. To configure a SCSI storage device, select an optional SCSI controller then refer to AppendixD: Cables - Storage Units - Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supportedcable. For HDD or other expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the FibreChannel Solutions Overview section.5. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).Bay Form Factor Height Front Access Usage1 1HS or 89mm (3.5in) 2 SL yes 3 open2 HS or 89mm (3.5in) 2 SL yes 3 open1. Boot drive should be located in bay one.Chapter 13. xSeries 335 115


2. x335 supports IDE and hot-swap models.3. Bays one and two are not front-accessible in IDE models, which include one IDE HDD in bay one.CD-ROMFDDHDD bay 1 HDD bay 2xSeries 335 front view116 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 335 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCI Support 1SlotsSupported 1Hot-PlugStorage Controllers 2, 302R0996 02R0988 4ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz 2 -02R0995 32P0033 4ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 2 -24P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit/66MHz 2 -71P8605 71P8592 ATA133 RAID Controller Half 32-bit/33MHz 1, 2 -24P2650 19K4646 5PCI Wide Ultra160 SCSI Adapter Half 64-bit/66MHz 1, 2 -71P8614 71P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz 1, 2 -Internal RAID Cable02R2046 02R2068 Ultra320 Internal Single-drop 24in LVD SCSI Cable 4 - - - -Fibre Storage Controllers and Options 624P2334 00N6881 FAStT Host Adapter Half 64-bit/66MHz 1, 2 -24P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 1, 2 -- 17421RU FAStT700 Fibre Channel Storage Server - - - -- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 174290U FAStT900 Storage Server (US line cord) - - - -- 172260U FAStT600 Storage Server (US line cord, English pubs) - - - -- 1724100 FAStT100 Storage Server - - - -- 2034212 McDATA Sphereon 4300 Fabric Switch Model 212 - - - -- 2005H08 TotalStorage SAN Fabric Switch Model H08 - - - -- 2005H16 TotalStorage SAN Fabric Switch Model H16 - - - -- 3534F08 TotalStorage SAN Switch F08, 8-port - - - -- 2109F16 SAN Fibre Channel Switch, 16-Port - - - -Networking 725P2889 06P3601 10/100 Ethernet Server Adapter8 Half 32-bit/33MHz 1, 2 -32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit/133MHz 1, 2 -31P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) 8 Half 64-bit/133MHz 1, 2 -32P9298 31P6401 NetXtreme 1000 T Dual Port Ethernet AdapterHalf 64-bit/133MHz 1, 2 -(copper) 9Communications 9System Management 1002R1676 59P2984 11Remote Supervisor Adapter II Half 32-bit/33MHz 1 -1. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installed ina 33MHz slot. 33MHz adapters will reduce 66MHz buses to 33MHz. 133MHz PCI-X adapters are backward compatible with 33/66MHz, 64-bitPCI-based servers.2. xSeries 335 has a single-channel, Ultra320 integrated controller that supports both Ultra160 and Ultra320 HDDs. The entire SCSI bus will defaultto the slower rate (MB/second) if HDDs of different technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocatedfor mirroring if a RAID adapter is not installed.Chapter 13. xSeries 335 117


3. If a RAID controller is installed in either slot one or two, the boot media must be attached to it. If two RAID controllers are installed, the bootmedia must be attached to the controller in slot one. If two non-RAID storage controllers are installed, the BIOS for the integrated storage controllermust be disabled, i.e., it cannot support either external or internal storage media.4. Cable option 02R2068 is required in order to fully support U320 SCSI speeds when cabled to internal HDDs.5. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a five-drop terminated LVD SCSI cable which is not supported for use in this server.6. See the Fibre Channel Solutions Overview section for additional configuration information.7. xSeries 335 includes dual full-duplex copper 10/100/1000Mbps Broadcom 5703 Ethernet controllers.8. The Wake on LAN function of this option is supported.9. xSeries 335 includes four USB ports (two each on both front and rear), a high-speed serial/asynchronous port (NS16550A compatible), one RS-485 port, and in/out C2T Interconnect connectors.10. xSeries 335 has one integrated RS-485 system management interconnect port located on the back of the system chassis. Connection of the standardservice processor to servers other than xSeries 335 in an interconnect network requires a customer-supplied Cat5 Ethernet cable. Connectionto other xSeries 335 servers can also be achieved through the C2T Interconnect chaining cables, which transmits both console connectivity andsystem management functionality.11. Connection of the external AC power supply provided with RSA is not required.PCI slot 1PCI slot 2Slot 1: Bus 2, 100MHz, 64-bit, 3.3v, half-length, PCI-XSlot 2: Bus 1, 100MHz, 64-bit, 3.3v, full-length, PCI-XxSeries 335 rear viewxSeries 335 Power and AccessoriesOption NumberDescriptionPower 1Uninterruptible Power Supply (UPS) 232P1020APC 2U Smart-UPS 1400RMB2130R30 UPS3000XLV 32130R31 UPS3000XHV 332P1692 UPS Extend Run Battery Pack 337L6861 APC Smart-UPS 5000RMB 4Monitors 5633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 663324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black 617231UX 1U Flat Panel Monitor Console Kit (with US Space Travel keyboard) 717231NX 1U Flat Panel Monitor Console Kit (without keyboard) 76734HB06636AB16636HB1L170p ThinkVision 17in LCD Flat Panel Monitor (432mm, 17in viewable image), businessblackL150 ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image), businessblackL150p ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image), businessblack32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 832P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 81. xSeries 335 models include a worldwide, voltage-sensing 332w power supply with auto-restart and two9ft line cords, one with an IEC 320 C14 connector for attachment to a PDU or high-voltage UPS and onewith a 110v NEMA 5-15P connector for attachment to a low-voltage UPS or wall outlet.2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.3. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.4. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.118 Configuration and Options Guide


Refer to the Important Notices section for important notices5. xSeries 335 includes an integrated ATI Rage XL SVGA controller with 8MB of video memory.6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).7. Includes a 17in Flat Panel Monitor.8. Includes a 15in Flat Panel Monitor.SBB Number Option Number DescriptionRack and NetBAY 1, 2Refer to the Rack Cabinets and Options section for informationconcerning IBM racks and rack-supported devices.Console Connectivity 3- 06P4792 C2T Interconnect Cable Chain Technology Cable Kit 4- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 32P1637 C2T Conversion Option- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 2x8 Console Switch32P8917 28L3644 Space Saver II Keyboard 6, 7Keyboard and Mouse 502R3421 28L3673 Sleek 2-button Mouse, business black1. xSeries 335 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinetsand Options section.2. Note limitations and restrictions required for adequate cooling in the Rack Cabinets and Options section. Ifnon-IBM racks are to be used, assure that both front and rear doors offer a minimum of 48% open area uniformlydistributed and in line with installed servers. A clearance of 51 to 64mm (2 to 2.5in) must be maintained betweenthe front door and the system unit's front bezel. The rear door must maintain the same or greater clearance.3. Refer to the Rack Console Options section for information regarding console connectivity using these options.4. A C2T Interconnect Cable Chain Technology Cable Kit (P/N 06P4792) may be used for the attachment of consoledevices to one or multiple chained xSeries 335s. The kit contains a 2m (6.5ft) breakout cable for attachmentto a keyboard, mouse and monitor as well as a 2m (6.5ft) chaining cable for connecting two xSeries 335s togetherwhen the standard 260mm (10in) chaining cable is not long enough. A maximum of 42 xSeries 335s are supportedin a single chain. No more than one Cable Chain Technology Cable Kit may be used. If the last server in the chainis connected to a console switch rather than directly to a monitor, a console cable (P/N 09N4293 or 94G7447) isrequired in addition to the cable kit. System management interconnect network functionality is transmitted betweenx335 systems through the C2T Interconnect cable.5. xSeries 335 supports rack configurations only and ships without a keyboard or mouse.6. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in ready-to-use position,or NetBAY 2U Flat Panel Monitor Console Kit. Standard with 2U NetBAY console kits7. Advanced TrackPoint IV features are not available on IBM xSeries systems.Chapter 13. xSeries 335 119


xSeries 335 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupported 1StorageInterfaceForm FactorExt TapeEnclosures 132P8861 00N7991 20/40 GB DDS/4 4mm Internal TapeDrive71P9176 71P9145 36/72GB DDS/5 Internal SCSI TapeDrive- Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH- Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH-0034B0X- 59P6719 40/80GB DLT VS80 Internal SCSITape Drive71P9187 59P6745 80/160GB DLT VS160 SCSI TapeDrive- Ultra2 (16-bit) 133mm (5.25in) HH 0034B0X- Ultra160 (16-bit) 133mm (5.25in) HH 0034B0X71P9166 59P6746 80/160GB VXA-2 SCSI Tape Drive - Ultra2 (16-bit) 133mm (5.25in) HH 0034B0X49P3225 00N8016 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X- 59P6717 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) HH 0034B0X24P7303 59P6736 160/320GB SDLT Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0X71P9165 59P6744 200/400GB LTO Full-High TapeDrive- Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0XTape Autoloaders- 00N7992 120/240GB DDS/4 Tape Autoloader - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X- 360716X 3607 Series 1760GB/3.5TB SDLTproTape Autoloader- 360726X 3607 Series 1.6TB/3.2TB LTO TapeAutoloader- Ultra2 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- 18P9133 TotalStorage Ultrium LVD TapeDrive 3580 Model L23- Ultra160 (16-bit) Stand-alone or5U Rack 2-- 3581L28 TotalStorage Ultrium LVD Tape 2UAutoloader 3581- 3581F28 TotalStorage Ultrium Fibre Tape 2UAutoloader 3581- Ultra160 (16-bit) Stand-alone or 2U Rack 2 -- 2Gb Fibre Channel Stand-alone or 2U Rack 2 -External Tape Enclosures- 0034B0X NetBAY Tape Enclosure (RackMount) 3- 3503B1X Full-High SCSI Tape Enclosure 4- Ultra2 (16-bit) 4U Rack -- Ultra2 (16-bit) Desktop or 3U Rack -- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160 (16-bit) 1U Rack -External Tape Libraries 5- 18P9212 TotalStorage Ultrium LVD TapeLibrary 3582 Model L23 3 - Ultra160 (16-bit) Stand-alone or 4U Rack 6-- 18P9337 TotalStorage Ultrium Fibre TapeLibrary 3582 Model F23 3 - 2Gb Fibre Channel Stand-alone or 4U Rack 6 -Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. xSeries 335 does not support internal tape drives and does not include an external SCSI connector. An external tape library or internal tape drivewith a tape enclosure, supported SCSI adapter and appropriate cable must be selected. Select tape drive, enclosure and supported adapter then useAppendix D: Cables - Storage Units - Controllers to select an appropriate external cable.2. Rack mount kit requires an optional rack kit. See tape drive appendix for more information.3. External cables are not included.4. An external cable is included. Requires a fixed shelf if installed in a rack (allow an additional 1U in rack for fixed shelf).5. Tape library attributes and options are located in the tape library appendix.6. Rack mount kit is standard. Stand-alone kit is optional. See tape drive appendix for more information and options.120 Configuration and Options Guide


Chapter 14. xSeries 336xSeries 336 At-A-GlancePart Number 1CPU/FSB Speed (GHz/MHz) - Cache 2Processor Quantity (Std/Max)Memory (Std/Max) 3, 4Form FactorPower Supply Quantity (Std/Max) 5Hot-swap (Power, Slots, HDD, Fans)System Management Processor 6Integrated Ethernet 7Storage ControllerInternal HDD InterfaceInternal HDD Storage (Std/Max)Optical DriveBays (Total/Avail)Slots (Total/Avail)8837-01Y 2.8/800 -1MB L21/2 512MB/16GBRack (1U) 1/2 P, H, F Y Dual1GBU320 Hot-swap 0GB/293.6GB 8DVD-ROM (8X)3/2 2/28837-02Y 2.8/800 -1MB L21/2 512MB/16GBRack (1U) 1/2 P, F Y Dual1GBSATA0GB/500GB 9SimpleswapDVD-ROM (8X)3/2 2/28837-11Y 3.0/800 -1MB L21/2 1GB/16GB Rack (1U) 1/2 P, H, F Y Dual1GBU320 Hot-swap 0GB/293.6GB 8 DVD-ROM (8X)3/2 2/28837-21Y 3.2/800 -1MB L21/2 1GB/16GB Rack (1U) 1/2 P, H, F Y Dual1GBU320 Hot-swap 0GB/293.6GB 8 DVD-ROM (8X)3/2 2/28837-2AY 3.2/800 -1MB L21/2 1GB/16GB Rack (1U) 1/2 P, H, F Y Dual1GBU320 Hot-swap 0GB/293.6GB 10- 114/4 2/28837-22Y 3.2/800 -1MB L21/2 1GB/16GB Rack (1U) 1/2 P, F Y Dual1GBSATA0GB/500GB 9SimpleswapDVD-ROM (8X)3/2 2/28837-31Y 3.4/800 -1MB L21/2 1GB/16GB Rack (1U) 1/2 P, H, F Y Dual1GBU320 Hot-swap 0GB/293.6GB 8 DVD-ROM (8X)3/2 2/28837-41Y 3.6/800 -1MB L21/2 1GB/16GB Rack (1U) 1/2 P, H, F Y Dual1GBU320 Hot-swap 0GB/293.6GB 8 DVD-ROM (8X)3/2 2/28837-4AY 3.6/800 -1MB L21/2 1GB/16GB Rack (1U) 1/2 P, H, F Y Dual1GBU320 Hot-swap 0GB/-11 4/4 2/2293.6GB 108837-42Y 3.6/800 -1MB L21/2 1GB/16GB Rack (1U) 1/2 P, F Y Dual1GBSATA0GB/500GB 9SimpleswapDVD-ROM (8X)3/2 2/2Note: xSeries 336 is housed in a 19in rack-mountable drawer and also provides three USB ports (one front, two rear), one 9-pin serial port,keyboard port, mouse port, video port and an integrated ATI Radeon 7000M graphics controller with 16 MB of video memory. A keyboard,mouse and diskette drive is not provided.1. Model numbers provided are worldwide generally available variant (GAV) model numbers which are not orderable as listed and need to be modifiedby country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8837-01Y is 8837-01U. Seethe product specific Official IBM announcement letter for other country-specific GAV model numbers. GAV to MTM mapping for L.A. and A.P. Geographiesfollow the same pattern. Substitute the last character with the country-specific designator.2. Intel Xeon processor with Extended Memory 64 Technology (EM64T), L2 cache and an 800MHz (quad-pumped) Front Side Bus (FSB).3. High-speed, two-way interleaved PC2-3200 RDIMMs. Maximum capacity requires replacing the standard DIMMs. x336 will support 16GB of memoryif/when a supported 2GB DIMM is available.4. Memory-mirroring, hot-spare memory and Chipkill functions are supported. Chipkill is available on DIMMs 512MB and greater.5. See ‘Power and Accessories’ section for more information on the power supplies.6. Dual Broadcom 5721 Gigabit Ethernet controllers.7. SCSI models provide a single-channel, Ultra320 integrated SCSI controller which supports RAID-0 and RAID-1. SATA models provide two SATA controllerssupporting one HDD each.8. Maximum capacity requires installing two 146.8GB 3.5in SCSI HDDs.9. Maximum capacity requires installing four 73.4GB 2.5in SCSI HDDs.10. Maximum capacity requires installing two 250GB SATA HDDs.11. Models shipping with four 2.5in hot-swap HDD bays do not support an optical drive. Operating system installation requires a network-based install oran external USB optical drive.121


xSeries 336 Processor OptionsSBB NumberOptionNumberProcessor Options SMP Support 1xSeries 336 Memory Options24R9286 13N0668 2.8GHz/800MHz-1MB L2 Cache Xeon Processor 0xY24R9287 13N0669 3.0GHz/800MHz 1MB L2 Cache, Xeon Processor 1xY90P5195 13N0663 3.2GHz/800MHz 1MB L2 Cache, Xeon Processor 2xY90P5196 13N0664 3.4GHz/800MHz 1MB L2 Cache, Xeon Processor 3xY90P5197 13N0665 3.6GHz/800MHz 1MB L2 Cache, Xeon Processor 4xYNote: x336 processor options support Intel’s Extended Memory 64 Technology (EM64T).1. One additional processor may be installed, providing a maximum of two. All processors must be identical intype, speed and cache size.SBBNumber 1OptionNumberMemory Options90P0870 73P3523 512MB (2x256MB) PC2-3200 ECC DDR2 RDIMM Kit90P1218 73P3522 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit73P2873 73P2865 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit 273P2874 73P2866 2GB (2x1GB) PC2-3200 ECC DDR2 RDIMM Kit 2Note: 16GB of memory is supported, if/when a supported 2GB DIMM becomesavailable, via eight DIMM slots. Due to two-way interleaving, installation of memoryDIMMs in matched pairs is required beginning with DIMM slots one and two, then threeand four, then five and six, then the DIMM slots seven and eight. Memory-mirroringrequires all installed DIMMS to match and effectively reduces available memory by half.Hot-spare memory requires all installed DIMMs to match except for the last pair whichmust be of equal size or greater than other installed pairs.1. Quantity two of each SBB PN must be ordered to equal its corresponding option.2. Supports Chipkill. Mixing Chipkill DIMMs with nonChipkill DIMMs will disable all Chipkillfunction.Model0xY1xx, 2xx, 3xx,4xxStd. DIMM Configuration2 x 256MB PC2-3200 ECC DDR2 RDIMM2 x 512MB PC2-3200 ECC DDR2 RDIMM122 Configuration and Options Guide


Refer to the Important Notices section for important noticesBattery (BH1)DIMM 1 (J5)DIMM 2 (J7)DIMM 3 (J8)DIMM 4 (J10)DIMM 5 (J12)DIMM 6 (J13)DIMM 7 (J14)DIMM 8 (J15)VRM 1 (J1)Microprocessor 1(U16)Microprocessor 2(U32)VRM 2 (J25)Slot 1:PCI-X slot 1 64 bit/100 MHz (U33)xSeries 336 System BoardRemote SupervisorAdapter II SlimLine (J41)Slot 2:PCI-X 64 bit/133 MHz orPCI-Express x8 (U34)DVD connector (J39)xSeries 336 Internal CablingHot-swap SCSI modelsxSeries 336 hot-swap SCSI models are cabled internally with a single, 1-drop LVD SCSI cable, connectingthe integrated single-channel Ultra320 SCSI controller to the hot-swap backplane.Simple-swap SATAxSeries 336 simple-swap SATA models provide two point-to-point SATA cables connecting the twointegrated SATA controllers to the SATA simple-swap backplane.A single IDE device is supported on the 3.5in SCSI HDD models and the simple-swap SATA models. AnIDE device is not supported on the 2.5in SCSI HDD models.External SCSI attachment requires an optional SCSI controller be installed.Chapter 14. xSeries 336 123


xSeries 336 Hard Disk Drive (HDD) and Optical Storage OptionsSBB NumberOptionNumberDescription Height Bays Supported 1Max QtySimple-swap SATA HDDs 273P8009 73P8002 80GB 7200 rpm Simple-swap SATA HDD SL 1, 2 290P1398 73P8003 160GB 7200 rpm Simple-swap SATA HDD SL 1, 2 2- 73P8006 250GB 7200 rpm Simple-swap SATA HDD SL 1, 2 2Hot-swap Ultra320 HDDs 2, 390P1324 32P0796 36.4GB 10K rpm Ultra320 SCSI SFF HDD SFF 1, 2, 3, 4 490P1325 32P0797 73.4GB 10K rpm Ultra320 SCSI SFF HDD SFF 1, 2, 3, 4 425R3149 90P1304 36.4GB 10K rpm Ultra320 SCSI HDD SSL 1, 2 290P1335 90P1318 36.4GB 15K rpm Ultra320 SCSI HDD SSL 1, 2 290P1329 90P1305 73.4GB 10K rpm Ultra320 SCSI HDD SSL 1, 2 290P1336 90P1319 73.4GB 15K rpm Ultra320 SCSI HDD SSL 1, 2 290P1330 90P1306 146.8GB 10K rpm Ultra320 SCSI HDD SSL 1, 2 2Optical Devices 473P328824X/24X/24X/8X Max CD-RW/DVDCombinationUltra-Slim 3 173P3294 8X/24X Multi-Burner Ultra-Slim 3 173P3270 8X Max DVD-ROM Ultra-Slim 3 1External Storage Expansion Units 5Form Factor- 17331RU EXP400 Storage Expansion Unit Rack (3U)- 17332RX EXP400 Storage Expansion Unit (DCPower)Rack (3U)- 171010U FAStT EXP100 Storage Expansion Unit Rack (3U)- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)1724100 FAStT100 Storage Server Rack (3U)- 172260U FAStT600 Storage Server Rack (3U)- 24P8215 FAStT600 Turbo Storage Server Rack (3U)17226LU FAStT600 Entry Storage Server Rack (3U)- 35421RU FAStT200 Storage Server 6Rack (3U)- 35422RU FAStT200 HA Storage Server Rack (3U)- 19K1121 FAStT200 Redundant RAID Controller -1. Installation may require removing standard devices.2. Mixing SATA and SCSI HDDs is not supported.3. Small Form Factor (SFF) HDDs are 2.5in wide and cannot be mixed with the 3.5in SSL HDDs.4. SFF SCSI HDD models do not support an optical drive. 3.5in SCSI HDD and SATA models ship standard with an 8X Max DVD-ROM drive.5. An optional SCSI, RAID or Fibre controller is required in order to attach to the system.6. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).124 Configuration and Options Guide


Refer to the Important Notices section for important noticesSATA and 3.5in SCSI HDD ModelsBay Form Factor Height Front Access Usage1 89mm (3.5in) SSL Yes HDD2 89mm (3.5in) SSL Yes HDD3 133mm (5.25in) Ultra-Slim Yes Std. OpticalBay 1 Bay 2Bay 3xSeries 336 Front View2.5in SCSI HDD ModelsBay Form Factor Height Front Access Usage1 63.5mm (2.5in) SFF Yes HDD2 63.5mm (2.5in) SFF Yes HDD3 63.5mm (2.5in) SFF Yes HDD4 63.5mm (2.5in) SFF Yes HDDBay 1Bay 3USB connectorModel #Serial #Bay 2xSeries 336 Front ViewBay 4Chapter 14. xSeries 336 125


xSeries 336 I/O OptionsSBB NumberOptionNumberDescriptionAdapterLengthPCI SupportSlotsSupportedHot-Plug 1Storage Controllers71P8633 13N2190 ServeRAID-6i+ Controller Half 64-bit/133MHz 1 -02R0996 02R0988 ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz 2 -02R0995 32P0033 ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 2 -71P8651 71P8648 ServeRAID-7t SATA RAID Controller Half 64-bit/64MHz 1, 2 -71P8614 71P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz 1, 2 -Fibre Storage Controllers and Options 224P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 1, 2 -- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 1724100 FAStT100 Storage Server - - - -- 1722260U FAStT600 Storage Server - - - -- 24P8215 FAStT600 Turbo Storage Server - - - -- 17226LU FAStT600 Entry Storage Server - - - -- 17421RU FAStT700 Storage Server - - - -- 174290U FAStT900 Storage Server - - - -- 2034212 McDATA Sphereon 4300 Fabric Switch Model212- - - -Networking- 31P9601 PRO/1000 MT Server Adapter by Intel Half 64-bit/133MHz 1, 2 -- 73P2701 PRO/1000 MT Dual Port Server Adapter byIntel- 31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter(copper)Half 64-bit/133MHz 1, 2 -Half 64-bit/133MHz 1, 2 -System Management73P9342 73P9341 Remote Supervisor Adapter II SlimLine 3- - - -Other I/O- 31P7201 V.90 Data/Fax Soft Modem 4Half 32-bit/33MHz 1, 2 -1. xSeries 336 does not have any Active-PCI slots.2. See Fibre Channel Solutions Overview section for additional configuration information.3. Installs into a dedicated slot. Does not consume a PCI slot. Quantity one allowed.4. Due to homologation variances, modem availability may differ by country.PCI slot 1 PCI slot 2Slot 1: Bus A, 64-bit, 100MHz, 3.3v, PCI-X, low-profile,half-lengthSlot 2: Bus B, 64-bit, 133MHz, 3.3v, PCI-X, full-lengthxSeries 336 Rear View126 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 336 Power and AccessoriesOptionNumberDescriptionPower 190P5280 585w Hot-Swap Power Supply 2Rack Mount Uninterruptible Power Supply (UPS) 332P102032P1022APC 2U Smart-UPS 1400RMBAPC 2U Smart-UPS 1400RMiB2130R30 UPS3000XLV 42130R31 UPS3000XHV 437L6861 APC Smart-UPS 5000RMB 537L6862 APC Smart-UPS 5000RMiB 532P1692 UPS Extend Run Battery Pack 41. xSeries 336 ships with a single 585w hot-swap capable power supply, a rack power cableand line cord. A second hot-swap power supply is optional for redundancy.2. The power supply ships with a single 2.8m rack power Y-cable which replaces the system’sstandard power cable. When used in conjunction with multiple x336s, the Y-cable isdesigned to be split between x336s. Therefore, the number of PDU outlets used is reducedand a certain level of redundancy is provided.3. For runtimes and UPS attributes, see Appendix C: UPS Runtime Estimate.4. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.5. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.Chapter 14. xSeries 336 127


SBB NumberOptionNumberDescriptionRack Console Connectivity 1- 1735L04 NetBay Local Console Manager- 1735R16 NetBay Remote Console Manager- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion Option- 09N4290 NetBay 1x4 Console Switch- 09N4291 NetBay 2x8 Console SwitchKeyboard and Mouse- 28L3644 Space Saver II Keyboard 2- 31P8950 USB Keyboard with UltraNav - US English- 31P9490 USB Travel Keyboard with UltraNav - US English- 73P2620 USB Keyboard Enhanced Performance Keyboard - US English- 31P8700 Optical 3-button ScrollPoint Pro Mouse - 800dpi - PS/2 and USB- 06P4069 USB Optical Wheel Mouse- 31P7405 Optical 3-button ScrollPoint Mouse - 800dpi - PS/2 and USB- 33L3252 SpaceBall 3D Input DeviceOther Accessories- 05K9276 USB Portable Diskette Drive- 33L5151 USB Portable CD-ROM- 22P9163 USB 2.0 Portable Multi-BurnerNote: Refer to the Rack Cabinets and Options section for information concerning IBMracks and rack-supported devices.1. USB accessories are not compatible with the NetBay console switches. They attach to a singleUSB-capable server.2. Installation within a rack requires an optional keyboard tray (P/N 28L4707) or a monitorconsole kit.128 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 336 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupportedStorageInterfaceForm FactorExt TapeEncl- 71P9145 36/72GB DDS/5 Internal SCSI Tape Drive - Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH-- 59P6719 40/80GB DLT VS80 Internal SCSI TapeDrive- Ultra2 (16-bit) 133mm (5.25in) HH -- 59P6746 80/160GB VXA-2 SCSI Tape Drive - Ultra2 (16-bit) 133mm (5.25in) HH 45591UX- 59P6717 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) HH -- 59P6745 80/160GB DLT VS160 SCSI Tape Drive - Ultra160 (16-bit) 133mm (5.25in) HH 45591UX- 59P6736 160/320GB SDLT SCSI Tape Drive Option - Ultra2 (16-bit) 133mm (5.25in) FH -- 59P6744 200/400GB LTO Full-High Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH -External Tape Enclosures- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160 (16-bit) 1U Rack -- 4559HHX Half-High Tape Enclosure - Ultra160 (16-bit) Desktop or Rack Shelf(2.52in tall)- 4559FHX Full-High Tape Enclosure - Ultra160 (16-bit) Desktop or Rack Shelf(4.41in tall)--Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.Chapter 14. xSeries 336 129


130 Configuration and Options Guide


Chapter 15. xSeries 343 (NEBS-compliant)xSeries 343 At-A-GlancePart Number 1, 2Processors/FSB Speed (GHz/MHz)Number of Processors (Std/Max)CacheMemory (Std/Max)Form FactorPower, Supply Quantity (Std/Max)Hot-Swap (Power, Slots, HDD, Fans)System Management ProcessorsStorage Controller 3Internal HDD InterfaceInternal HDD Storage (Std/Max)Optical DriveBays (Total/Avail)Slots (Total/Avail)8827-14X 1.26 42/2 512KBL22GB/6GBRack(2U)2/2 5P Y Dual U160 Fixed 36.4GB/72.8GB 6CD-ROM24x-10x4/1 6/68847-14X 2.4/533 72/2 512KBL21GB/12GB 8Rack(2U)1/2 9P Y Dual U320 Hot-Swap 73.4GB/293.6GB 10CD-ROM24x-10x3/1 6/68847-24X 72.4/533 2/2 512KBL22GB/12GB 8Rack(2U)2/2 9 P Y Dual U320 Hot-Swap 146.8GB/293.6GB 11CD-ROM24x-10x3/1 6/6Note: xSeries 343 is Network Equipment Building System (NEBS) Level 3 compliant, in its standard configuration, for utilization in atelecommunications network infrastructure. For information about obtaining NEBS compliancy for any other configuration, contactyour IBM representative. x343 includes -48v direct current (DC) power supplies requiring a direct current power source (-48v to -60v).Housed in a 19in rack-mountable drawer which requires a two-post rack. It is not supported in standard IBM racks.1. x343 machine-type 8827 also provides two integrated Intel 10/100 Ethernet controllers, two rear USB ports, a single serial port (via a RJ-45 connector)and a single combined keyboard/mouse port. A keyboard or mouse is not provided.2. x343 machine-type 8847 also provides two integrated Intel gigabit Ethernet controllers, two front and two rear USB, two serial ports (via RJ-45connectors) and a single combined keyboard/mouse port. A keyboard or mouse is not provided and x343 machine-type 8847 does not ship with adiskette drive.3. Storage controllers are integrated and dual-channel, supporting both internal and external SCSI attachment.4. Intel Pentium III processor with advanced transfer L2 cache and a 133MHz Front-side bus (FSB).5. Includes two standard 350w, -48v direct current (DC) hot-swap, redundant power supplies.6. Ships standard with one nonhot-swap 36.4GB 10k rpm U160 SCSI HDD.7. Intel Xeon processor with advanced transfer L2 cache and a 533MHz Front-side bus (FSB).8. 12GB is supported when “Special Bid Order Only” 2GB DIMMs are installed in all six DIMM slots.9. Power supplies are 470w, -48v DC. They are hot-swappable and redundant when two are installed. An AC power supply kit is available viaSpecial Bid order only.10. Ships standard with one hot-swap 73.4GB 10k rpm U320 SCSI HDD.11. Ships standard with one hot-swap 146.8GB 10k rpm U320 SCSI HDD.xSeries 343 Memory OptionsOptionNumberx343 MT 8847 Memory Options 1, 2- 1GB PC2100 ECC DDR RDIMM Kit 373P4126 2GB PC2100 ECC DDR RDIMM Kit- 4GB PC2100 ECC DDR RDIMM Kit 31. Due to two-way interleaving, installation of memory optionsin pairs beginning with sockets one and four is required. Addmemory options in sockets two and five, then three and six.2. The 1GB DIMM Kit contains two 512MB DIMMs. The 2GBDIMM Kit contains two 1GB DIMMs. The 4GB DIMM Kit containstwo 2GB DIMMs.3. Available via Special Bid order only.131


ModelStd. DIMM Configuration8827-14X 2 x 1GB PC133 ECC SDRAM RDIMM8847-14X 2 x 512MB PC2100 ECC DDR RDIMM8847-24X 2 x 1GB PC2100 ECC DDR RDIMMxSeries 343 Internal SCSI CablingMT - 8827A two-drop 16-bit LVD SCSI cable connects the standard HDD to the integrated, dual-channel U160 SCSIcontroller. The second channel of the integrated SCSI controller is hardwired to the rear of the systemproviding an external 0.8mm VHDCI connector for external attachment. A single-drop IDE cable connectsto the standard optical drive.MT - 8847A two-drop 16-bit LVD SCSI cable connects the standard HDD to the integrated, dual-channel U320 SCSIcontroller. The second channel of the integrated SCSI controller is hardwired to the rear of the systemproviding an external 0.8mm VHDCI connector for external attachment. A single-drop IDE cable connectsto the standard optical drive.xSeries 343 Hard Disk Drive Storage OptionsDescription Height Bays Supported 1Max Qty 173.4GB 10k rpm Ultra320 SCSI Hot-swap HDD 2SL 2, 3 2146.8GB 10k rpm Ultra320 SCSI Hot-swap HDD2 SL 2, 3 2Note: HDD options for x343 MT 8847 are available via Special Bid order only. Contact your IBMrepresentative for more information.1. One HDD ships standard.2. Not supported in x343 MT 8827.xSeries 343 8827 Bay ConfigurationBay Form Factor Height Front Access Usage1 133mm(5.25in)Slim yes Std.Optical2 89mm (3.5in) SL yes Std. FDD3 89mm (3.5in) SL yes Std. HDD4 89mm (3.5in) SL yes HDDCD-ROMFDDbay 2 bay 1xSeries 343 8827 front view132 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 343 8847 Bay ConfigurationBay Form Factor Height Front Access Usage1 133mm(5.25in)Slim yes Std.Optical2 89mm (3.5in) SL yes HDD3 89mm (3.5in) SL yes Std. HDDxSeries 343 I/O OptionsxSeries 343 8847 front viewOptionNumberDescriptionAdapterLengthPCI SupportSlotsSupportedStorage Controllers 171P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz 1 ... 6Networking 231P9601 PRO/1000 MT Server Adapter by Intel Half 64-bit/133MHz 1 ... 631P6301 NetXtreme 1000 T Ethernet Adapter (copper) Half 64-bit/133MHz 1 ... 6Note: I/O options above are for x343 MT 8847. They are not supported in x343 MT 8827. Select third-party optionsare supported on x343 MT 8827. Refer to the IBM Serverproven compatibility website for latest available information.IBM makes no representations or warranties with respect to non-IBM products. These products are offered andwarranted by the third parties, respectively.1. x343 MT 8847 ships with a dual-channel, integrated U320 SCSI controller. x343 MT 8827 ships with a dual channel, integratedU160 SCSI controller. Both provide support for external SCSI attachment.2. x343 MT 8847 includes dual, integrated, copper-based, full-duplex, Intel gigabit Ethernet controllers. x343 MT 8827 includesdual, integrated, copper-based, full-duplex, Intel 10/100 megabit Ethernet controllers.slot 3 slot 6slot 2slot 1slotslotSlot 1: bus 1, 64-bit, 66MHz, half-length, low-profile, 3.3v, PCISlot 2: bus 1, 64-bit, 66MHz, half-length, low-profile, 3.3v, PCISlot 3: bus 1, 64-bit, 66MHz, half-length, low-profile, 3.3v, PCISlot 4: bus 2, 64-bit, 33MHz, full-length, 5v, PCISlot 5: bus 2, 64-bit, 33MHz, full-length, 5v, PCISlot 6: bus 2, 64-bit, 33MHz, full-length, 5v, PCIxSeries 343 8827 rear viewChapter 15. xSeries 343 (NEBS-compliant) 133


slot 3 slot 6slot 2slot 1slotslotSlot 1: bus C, 64-bit, 100MHz, half-length, low-profile, 3.3v, PCI-XSlot 2: bus C, 64-bit, 100MHz, half-length, low-profile, 3.3v, PCI-XSlot 3: bus C, 64-bit, 100MHz, half-length, low-profile, 3.3v, PCI-XSlot 4: bus B, 64-bit, 33MHz, full-length, 5v, PCISlot 5: bus B, 64-bit, 33MHz, full-length, 5v, PCISlot 6: bus B, 64-bit, 33MHz, full-length, 5v, PCIxSeries 343 rear viewNote: Bus C may operate at lower speeds if all three slots are populated.xSeries 343 Power and AccessoriesOptionNumberDescriptionPower 1, 2- 470w, -48v, Hot-swap Power Supply 3, 4- AC Power Supply Kit 5, 4Monitors 6633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 7, 81. xSeries 343 MT 8827 includes two 350w, -48v direct current (DC) power supplies requiring a directcurrent power source (-48v to -60v). Power cord is customer-supplied.2. Depending on model, x343 MT 8847, ships with one or two 470w, -48v DC power supplies. Powercord is customer-supplied. A maximum of two power supplies are supported.3. Not available for x343 MT 8827.4. Available via Special Bid order only. Contact your IBM Representative for further information.5. Kit provides necessary hardware to convert x343 MT 8847 DC models to AC power. Customer willneed to specify one or two AC power supplies.6. xSeries 343 uses an ATI Rage XL SVGA controller with 8MB of video memory.7. Not available for x343 MT 8847.8. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).OptionNumberDescriptionRack and NetBAY 1Keyboard and Mouse 228L3644 Space Saver II Keyboard 328L3673Sleek 2-button Mouse, business black1. xSeries 343 is housed in a 19in rack-mountable drawer and requires a two-post rack. Not supportedfor installation in standard IBM racks.2. xSeries 343 supports rack configurations only and ships without a mouse or keyboard.3. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in readyto-useposition.134 Configuration and Options Guide


Chapter 16. xSeries 345xSeries 345 At-A-GlancePart Number 1Processor/FSB Speed (GHz/MHz)Number of Processors (Std/Max)CacheMemory (Std/Max) 2Form FactorPower Supply Quantity (Std/Max)Hot-Swap (Power, Slots, HDD, Fans)Redundancy (Optical, Standard) 3System Management ProcessorsOnboard EthernetStorage Controller 4Removable Media Bays (Total/Avail) 5Internal HDD Storage (Std/Max) 6CD-ROM (IDE)Bays (Total/Avail)Slots (Total/Avail) 78670-K1X 2.67/533 81/2 512KBL2512MB/8GBRack(2U)1/2 P,H, FO -Power,O- FansY 2 x 1Gb Dual,U3202/0 0/880.8GB 24x-10x 8/6 5/58670-L1X 82.8/533 1/2 512KBL2512MB/8GBRack(2U)1/2 P,H, FO -Power, O- FansY 2 x 1Gb Dual,U3202/0 0/880.8GB 24x-10x 8/6 5/58670-M1X 3.06/5338 1/2 512KBL2512MB/8GBRack(2U)1/2 P,H, FO -Power, S- FansY 2 x 1Gb Dual,U3202/0 0/880.8GB 24x-10x 8/6 5/58670-F1X 3.06/533 91/2 1MBL3512MB/8GBRack(2U)1/2 P,H, FO -Power, S- FansY 2 x 1Gb Dual,U3202/0 0/880.8GB 24x-10x 8/6 5/58670-G1X 93.2/533 1/2 1MBL31GB/8GBRack(2U)1/2 P,H, FO -Power, S- FansY 2 x 1Gb Dual,U3202/0 0/880.8GB 24x-10x 8/6 5/58670-J1X 3.2/5339 1/2 2MBL31GB/8GBRack(2U)1/2 P,H, FO -Power, S- FansY 2 x 1Gb Dual,U3202/0 0/880.8GB 24x-10x 8/6 5/51. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See Rack Cabinets and Options section for supportedIBM racks.2. High-speed, two-way interleaved 133MHz DDR PC2100 RDIMMs. 1GB models ship with Chipkill DIMMs. Maximum amount comprises of four2GB DIMMs, which requires replacing the standard RDIMMs. Usage of the 2GB DIMM requires redundant power and cooling.3. See ‘xSeries 345 Power and Accessories’ section for important information concerning x345 power supplies.4. The dual-channel, Ultra320 integrated controller supports both Ultra160 and Ultra320 HDDs, but the entire SCSI bus will default to the slower rate(MB/second) if HDDs of different technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocated for mirroring if aRAID adapter is not installed. One additional HDD may be designated as a hot-spare for HDDs configured in the onboard mirror. Mirrored and hotspareHDDs must be matched.5. xSeries 345 includes two slim-line media bays populated by a standard slim-line CD-ROM and a floppy disk drive.6. Total capacity includes installation of six 146.8GB slim-line (SL) hot-swap HDDs.7. Three slots are horizontal full-size slots (two full-length and one half-length) and two are vertical low-profile slots that are both full-length (seeI/O Options section).8. Intel Xeon processor with advanced transfer L2 cache and a 533MHz (quad-pumped) Front Side Bus (FSB).9. Intel Xeon processor with advanced transfer L2 cache, an additional L3 cache and a 533MHz (quad-pumped) Front Side Bus (FSB).135


xSeries 345 Processor OptionsSBBNumberOptionNumberProcessor UpgradesSMPSupport 1xSeries 345 Memory Options71P8033 71P8966 2.67GHz/533MHz-512KB L2 Cache Xeon Processor KxX71P8034 71P8967 2.8GHz/533MHz-512KB L2 Cache Xeon Processor LxX73P6551 02R1988 3.06GHz/533MHz-512KB L2 Cache Xeon Processor MxX88P9780 88P9677 3.06GHz/533MHz-1MB L3 Cache Xeon Processor FxX23K4596 23K4523 3.2GHz/533MHz-1MB L3 Cache Xeon Processor GxX26K5062 13N0682 3.2GHz/533MHz-2MB L3 Cache Xeon Processor JxX1. One additional processor may be installed, providing a maximum of two. All processors must be identical intype, speed, and cache size.SBBNumberOptionNumberMemory Description 1, 273P2876 373P2868 3 512MB DDR PC2100 ECC RDIMM Kit 337L3538 33L5038 512MB DDR PC2100 ECC RDIMM33P3126 33L5039 1GB DDR PC2100 ECC RDIMM32P9223 33L5040 2GB DDR PC2100 ECC RDIMM 41. Due to two-way interleaving, installation of memory options in matched pairs isrequired. Install first two DIMMs in sockets one and two and the second set insockets three and four (refer to planar diagram).2. Chipkill is available in 512MB DIMMs and above. Installation of a non-ChipkillDIMM will disable all Chipkill function.3. The 512MB kit option contains two 256MB non-Chipkill DIMMs, whereas theSBB contains a single DIMM.4. Usage of the 2GB DIMM requires redundant power and cooling be installed.RDIMM 4RDIMM 3RDIMM 2RDIMM 1CPU 1 CPU 2fan 1 fan 2fan 3fan 4fan 5fan 6fan 7fan 8xSeries 345 top view of planar from rear136 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 345 Internal SCSI CablingThe xSeries 345 includes eight front-accessible bays. The top right slim-line bay contains a slim-line 3.5indiskette drive and the top left slim-line bay contains a slim-line CD-ROM. Six slim-line, hot-swap HDDbays are located in the center of the front of the chassis.The system contains a DASD backplane supporting six hot-swap, SCA-2-compliant HDD bays. Thebackplane is connected to one of the connectors of the integrated Ultra320 SCSI controller through a 16-bit(nonterminated) LVD SCSI cable. In RAID configurations using ServeRAID-5i, no cable is required andboth channels of the integrated controller are managed by ServeRAID-5i. Internal RAID configurationsusing ServeRAID-4Mx or -4Lx require optional 30in nonterminated Single-drop Internal LVD Ultra160SCSI Cable (P/N 71P8995).External SCSI device attachment is facilitated by a dedicated 0.8mm VHDCI port on the rear of the systemchassis, which is connected to the second channel of the integrated controller. If ServeRAID-5i is installed,supported tape drives that can be installed in an external tape enclosure are limited (see Tape Optionssection). External tape enclosures are also supported by installing PCI Wide Ultra160 SCSI Adapter (P/N19K4646).The 24x-10x CD-ROM is connected to the IDE port through an interposer card.xSeries 345 Hard Disk Drive (HDD) and Optical Storage OptionsSBBNumberOptionNumberDescription Height BaysSupportedMaximumQuantity 1Hot-swap Ultra320 HDDs32P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 632P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 632P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 632P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 632P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1 ... 6 6Optical Devices59P5800 22P7047 8x Max Slimline DVD-ROM Drive 2External Storage Expansion Units 3BaysSupportedAForm Factor- 17331RU EXP400 Storage Expansion Unit Rack (3U)171010U FAStT EXP100 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 172260U FAStT600 Storage Server (US line cord, English pubs) Rack (3U)- 17226LU FAStT600 Entry Storage Server Rack (3U)- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)- 35421RU FAStT200 Storage Server 4Rack (3U)- 35422RU FAStT200 HA Storage Server Rack (3U)- 19K1121 FAStT200 Redundant RAID Controller -- 1724100 FAStT100 Storage Server Rack (3U)1. When integrated mirroring is enabled, the maximum quantity of HDDs supported is three (two mirrored and one hot-spare).2. Requires removing and replacing the standard optical device.3. To configure a SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllersto confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansionunit options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre Channel SolutionsOverview section.4. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).Chapter 16. xSeries 345 137


Bay Form Factor Height Front Access UsageA 133mm (5.25in) SL Yes CD-ROMB 89mm (3.5in) SL Yes FDD1 ... 6 89mm (3.5in) SL Yes OpenHDD Bay 1HDD Bay 2CD-ROMHDD Bay 3HDD Bay 4FDDHDD Bay 5HDD Bay 6xSeries 345 front view138 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 345 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCI Support 1SlotsSupported 1Hot-Plug 2Storage Controllers 302R0996 02R0988 ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz 3, 4 -02R0995 32P0033 ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 3, 4 -- 13N2190 ServeRAID-6i+ Controller Half 64-bit/133MHz 2 -32P0022 25P3492 ServeRAID-5i Controller Full 64-bit/66MHz 2 -24P3472 06P5740 4ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit/66MHz 3, 4 -24P2650 19K4646 PCI Wide Ultra160 SCSI Adapter Half 64-bit/66MHz 1 ... 4 -71P8614 71P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz 1 ... 4 -Internal RAID Cable02R2046 02R2068 Ultra320 Internal Single-drop 24in LVD SCSI Cable 4 - - - -Fibre Storage Controllers and Options 524P2334 00N6881 FAStT Host Adapter Half 64-bit/66MHz 3, 4 -24P0963 24P0960 6FC2-133 Host Bus Adapter Half 64-bit/133MHz 1 ... 4 -- 174290U FAStT900 Storage Server (US line cord) - - - -- 17421RU FAStT700 Fibre Channel Storage Server - - - -- 172260U FAStT600 Storage Server (US line cord, English pubs) - - - -- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 1724100 FAStT100 Storage Server - - - -- 2034212 McDATA Sphereon 4300 Fabric Switch Model 212 - - - -- 2005H08 TotalStorage SAN Fabric Switch Model H08 - - - -- 2005H16 TotalStorage SAN Fabric Switch Model H16 - - - -- 3534F08 TotalStorage SAN Switch F08, 8-port - - - -- 2109F16 SAN Fibre Channel Switch, 16-Port - - - -Networking 725P2889 06P3601 10/100 Ethernet Server Adapter8 Half 32-bit/33MHz 3, 4 -32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter6 Half 64-bit/133MHz 1 ... 4 -31P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) 6, 8 Half 64-bit/133MHz 1 ... 4 -32P9298 31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter(copper) 6, 8 Half 64-bit/133MHz 1 ... 4 -Communications 932P8862 33L4618 10V.90 PCI Data/Fax Modem Half 32-bit/33MHz 5 -System Management02R1676 59P2984 Remote Supervisor Adapter II11 Half 32-bit/33MHz 5 -1. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installedin a 33MHz slot. 33MHz adapters will reduce 66MHz buses to 33MHz. 133MHz PCI-X adapters are backward compatible with 33/66MHz,64-bit PCI-based servers.2. This system does not support hot-plug PCI.3. xSeries 345 includes a dual-channel Ultra320 SCSI controller. Channel A is connected to the hot-swap backplane and channel B to an external0.8mm VHDCI connector.Chapter 16. xSeries 345 139


4. Cable option 02R2068 is required when connecting internal HDDs to ServeRAID-6M and ServeRAID-4Lx.5. See Fibre Channel Solutions Overview section for additional configuration information.6. The option includes brackets for installation in both low-profile and full-size PCI slots.7. xSeries 345 includes dual integrated copper Intel 10/100/1000Mbps Ethernet controllers, which support Wake on LAN.8. The Wake on LAN (WoL) function provided by this Ethernet PCI adapter is supported in this system.9. xSeries 345 provides three USB ports (two on the rear of the chassis and one on the front), one serial port and two RS-485 ports for systemmanagement.10. Due to homologation variances, modem availability may differ by country.11. Remote Supervisor Adapter II (P/N 59P2984) includes an internal 20-pin ribbon cable for connection to the system planar, an interconnectcable, a 56w AC power adapter, an intra-rack power cable and a country-specific wall power cord. External connectors include an RS230 (9-pin) serial port, 10/100 base T Ethernet port (RJ-45), interconnect port (RJ-11) and power connector. The interconnect cable includes a singleRJ-11 connector and dual RJ-48 ports. Supports an interconnect network of up to 24 RSAs or ISMPs with aggregate cable connection length of300ft (91.4m) or less. No more than 12 ASMPs are supported in an interconnect network. RJ-45 bus is self-terminating, i.e., terminators are notrequired for the interconnect bus.slot 1slot 2slot 3slot 4slot 5Slot 1: Bus A, 64-bit, 100MHz, 3.3v, PCI-X, low-profile, full-lengthSlot 2: Bus A, 64-bit, 100MHz, 3.3v, PCI-X, low-profile, full-length extended supports ServeRAID-5i)Slot 3: Bus B, 64-bit, 133MHz, 3.3v, PCI-X, full-length, installs horizontally on riser cardSlot 4: Bus B, 64-bit, 133MHz, 3.3v, PCI-X, full-length, installs horizontally on riser cardSlot 5: Bus C, 32-bit, 33MHz, 5v, half-length, installs horizontally on riser cardxSeries 345 rear view140 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 345 Power and AccessoriesSBB Number Option Number DescriptionPower 173P6554 74P4965 514w Hot-swap Redundant Power Supply Upgrade (US) 273P6554 74P4955 514w Hot-swap Redundant Power Supply Upgrade (International) 2- 32P1020 APC 2U Smart-UPS 1400RMB- 2130R30 UPS3000XLV 4- 2130R31 UPS3000XHV 4- 32P1692 UPS Extend Run Battery Pack 4- 37L6861 APC Smart-UPS 5000RMB 5Uninterruptible Power Supply (UPS) 3Monitors 6- 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 7- 63324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black 7- 32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 8- 32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 8- 17231UX 1U Flat Panel Monitor Console Kit (with US Space Travel keyboard) 9- 17231NX 1U Flat Panel Monitor Console Kit (without keyboard) 9- 6734HB0 L170p ThinkVision 17in LCD Flat Panel Monitor (432mm, 17in viewable image), businessblack- 6636AB1 L150 ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image), businessblack- 6636HB1 L150p ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image), businessblack1. xSeries 345 ships with a single worldwide, voltage-sensing hot-swap power supply, a 9ft line cord and a 9ft rack power cable(IEC 320-C13 to IEC 320-C14). N+N power supply redundancy requires installation of a matching optional power supply upgrade.2. The 514w Hot-swap Redundant Power Supply Upgrade Option is available for 3.xx CPU models and includes a power supply,a 9ft rack power cable and a 9ft line cord. Redundant cooling is standard on the 3.xx CPU models.3. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.4. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.5. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.6. xSeries 345 uses an integrated ATI Rage XL video controller with 8MB of memory.7. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).8. Includes a 15in Flat Panel Monitor.9. Includes a 17in Flat Panel Monitor.Chapter 16. xSeries 345 141


SBB Number Option Number Description- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion Option- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 2x8 Console Switch32P8917 28L3644 Space Saver II Keyboard 4, 502R3421 28L3673 Sleek 2-Button Mouse, business blackxSeries 345 Tape OptionsRack and NetBAY 1Refer to the Rack Cabinets and Options section for information concerning IBM racks andrack-supported devices.Console Connectivity 2Keyboard and Mouse 31. xSeries 345 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Optionssection. If installed in older IBM racks, the server should not be installed behind a glass door that blocks air flow. Remove the glassdoor or replace with an optional perforated door. To order a rack extension kit for withdrawan IBM racks, visit the Options ContinuationProgram Website at www.pc.ibm.com/ww/ocp.2. Refer to the Rack Console Options section for information regarding console connectivity using these options.3. xSeries 345 supports rack configurations only and ships without a mouse or keyboard.4. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in ready-to-use position, or NetBAY 2UFlat Panel Monitor Console Kit. Standard with 2U NetBAY console kits.5. Advanced TrackPoint IV features are not available on IBM xSeries systems.SBBNumberOptionNumberTape DrivesBaysSupported 1StorageInterfaceForm FactorExt TapeEnclosures 132P8861 00N7991 20/40GB DDS/4 4mm Internal Tape Drive - Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH71P9176 71P9145 36/72GB DDS/5 Internal SCSI Tape Drive - Ultra2 (16-bit) 89mm (3.5in) HH or133mm (5.25in) HH35100200034B0X35100200034B0X- 59P6719 40/80GB DLT VS80 Internal SCSI Tape Drive - Ultra2 (16-bit) 133mm (5.25in) HH 35100200034B0X71P9187 59P6745 80/160GB DLT VS160 SCSI Tape Drive - Ultra160 (16-bit) 133mm (5.25in) HH 0034B0X71P9166 59P6746 80/160GB VXA-2 SCSI Tape Drive - Ultra2 (16-bit) 133mm (5.25in) HH 35100200034B0X49P3225 00N8016 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0X- 59P6717 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) HH 0034B0X24P7303 59P6736 160/320GB SDLT Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0X71P9165 59P6744 200/400GB LTO Full-High Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0XTape Autoloaders- 00N7992 120/240GB DDS/4 Tape Autoloader - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X- 36232LX 200/400GB 2U LTO Generation 2 TapeAutoloader 3623 Model 2LX- 360716X 3607 Series 1760GB/3.5TB SDLTpro TapeAutoloader- Ultra160 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -142 Configuration and Options Guide


Refer to the Important Notices section for important notices- 360726X 3607 Series 1.6TB/3.2TB LTO TapeAutoloader- 18P9133 TotalStorage Ultrium LVD Tape Drive 3580Model L23- 3581L28 TotalStorage Ultrium LVD Tape 2UAutoloader 3581- Ultra2 (16-bit) 2U Rack -- Ultra160 (16-bit) Stand-alone or5U Rack 2 -- Ultra160 (16-bit) Stand-alone or2U Rack 2 -- 3581F28 TotalStorage Ultrium Fibre Tape 2UAutoloader 3581External Tape Enclosures- 2Gb FibreChannelStand-alone or2U Rack 2 -- 0034B0X 3NetBAY Tape Enclosure (Rack Mount) - Ultra2 (16-bit) 4U Rack -- 3510020 3, 4External Half-High SCSI Storage Enclosure - LVD (16-bit) Desktop -- 3503B1X 5Full-High SCSI Tape Enclosure - Ultra2 (16-bit) Desktop or 3U Rack -- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160 (16-bit) 1U Rack -External Tape Libraries 6- 4560SLX SDLT/LTO Modular Tape Library - Ultra2 (16-bit) 5U Rack -External Tape Libraries 6- 18P9212 TotalStorage Ultrium LVD Tape Library 3582Model L23 3 - Ultra160 (16-bit) Stand-alone or4U Rack 7 -- 18P9337 TotalStorage Ultrium Fibre Tape Library 3582 - 2Gb FibreModel F23 3 ChannelStand-alone or4U Rack 7 -Associated Options- 00N7956 68-pin External Multimode LVD/SE SCSITerminator- LVD/SE (16-bit) External 3510020Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. xSeries 345 does not support internal tape drives. An external tape library or internal tape drive with a tape enclosure, can be connected to theUltra320 0.8mm VHDCI external SCSI connector. Select tape drive and enclosure, then use Appendix D: Cables - Storage Units - Controllers to selectan appropriate external cable.2. Rack mount requires an optional rack kit. See tape drive appendix for more information.3. External cables are not included.4. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).5. An external cable is included. Requires a fixed shelf if installed in a rack (allow an additional 1U in rack for fixed shelf).6. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.7. Rack mount kit is standard. Stand-alone kit is optional. See tape drive appendix for more information and options.Chapter 16. xSeries 345 143


144 Configuration and Options Guide


Chapter 17. xSeries 346The xSeries 346 is housed in a 19in rack-mountable drawer and also provides three USB ports (one front,two rear), two 9-pin serial ports, two systems management RS-485 ports, an external SCSI port, keyboardport, mouse port, video port and an integrated ATI Radeon 7000M graphics controller with 16 MB of videomemory. A keyboard and mouse is not provided.xSeries 346 At-A-GlancePart Number 1CPU/FSB Speed (GHz/MHz) - Cache 2Processor Quantity (Std/Max)Memory (Std/Max) 3, 4Form FactorPower Supply Quantity (Std/Max) 5Hot-swap (Power, Slots, HDD, Fans)System Management ProcessorsIntegrated Ethernet 6Storage Controller 7Internal HDD InterfaceInternal HDD Storage (Std/Max) 8Optical DriveBays (Total/Avail)Slots (Total/Avail)8840-01Y 2.8/800 -1MB L21/2 512MB/16GB Rack (2U) 1/2 P, H,FYDual1GBDualU320Hotswap0/880.8GBDVD-ROM(8x-24x)8/6 4/48840-11Y 3.0/800 -1MB L21/2 1GB/16GB Rack (2U) 1/2 P, H,FYDual1GBDualU320Hotswap0/880.8GBDVD-ROM(8x-24X)8/6 4/48840-21Y 3.2/800 -1MB L21/2 1GB/16GB Rack (2U) 1/2 P, H,FYDual1GBDualU320Hotswap0/800.8GBDVD-ROM(8x-24x)8/6 4/48840-22Y 3.2/800 -1MB L21/2 1GB/16GB Rack (2U) 2/2 P, H,FY 9Dual1GBDualU320Hotswap0/800.8GBDVD-ROM(8x-24x)8/6 4/48840-31Y 3.4/800 -1MB L21/2 1GB/16GB Rack (2U) 1/2 P, H,FYDual1GBDualU320Hotswap0/800.8GBDVD-ROM(8x-24x)8/6 4/48840-32Y 3.4/800 -1MB L21/2 1GB/16GB Rack (2U) 2/2 P, H,FY 9Dual1GBDualU320Hotswap0/800.8GBDVD-ROM(8x-24x)8/6 4/48840-41Y 3.6/800 -1MB L21/2 1GB/16GB Rack (2U) 1/2 P, H,FYDual1GBDualU320Hotswap0/800.8GBDVD-ROM(8x-24x)8/6 4/48840-42Y 3.6/800 -1MB L21/2 1GB/16GB Rack (2U) 2/2 P, H,FY 9Dual1GBDualU320Hotswap0/800.8GBDVD-ROM(8x-24x)8/6 4/41. Model numbers provided are worldwide generally available variant (GAV) model numbers which are not orderable as listed and need to bemodified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 8840-01Y is 8840-01U. See the product specific Official IBM announcement letter for other country-specific GAV model numbers. GAV to MTM mappingfor L.A. and A.P. Geographies follow the same pattern. Substitute the last character with the country-specific designator.2. Intel Xeon processor with Extended Memory 64 Technology (EM64T), L2 cache and an 800MHz (quad-pumped) Front Side Bus (FSB).3. High-speed, two-way interleaved PC2-3200 RDIMMs. Maximum capacity requires replacing the standard DIMMs. x346 will support 16GB ofmemory if/when a supported 2GB DIMM becomes available.4. Memory-mirroring, hot-spare memory and Chipkill functions are supported. Chipkill is available on DIMMs 512MB and greater.5. See ‘Power and Accessories’ section for more information on the power supplies.6. Dual Broadcom 5721 Gigabit Ethernet controllers.7. The integrated dual-channel, Ultra320 SCSI controller supports integrated RAID-0, 1 and 10.8. Maximum capacity is based on six 146.8GB HDDs.9. This model ships standard with the Remote Supervisor Adapter II SlimLine adapter installed into a dedicated slot.145


xSeries 346 Processor OptionsSBB NumberOptionNumberProcessor Options SMP Support 1xSeries 346 Memory Options13M7939 13N0681 2.8GHz/800MHz-1MB L2 Cache Xeon Processor 0xY13M7940 13N0688 3.0GHz/800MHz 1MB L2 Cache Xeon Processor 1xY25K9555 13N0683 3.2GHz/800MHz 1MB L2 Cache Xeon Processor 2xY25K9556 13N0684 3.4GHz/800MHz 1MB L2 Cache Xeon Processor 3xY25K9557 13N0685 3.6GHz/800MHz 1MB L2 Cache Xeon Processor 4xYNote: The x346 processor options support Intel’s Extended Memory 64 Technology (EM64T).1. One additional processor may be installed, providing a maximum of two. All processors must be identicalin type, speed and cache size.SBBNumber 1OptionNumberMemory Options90P0870 73P3523 512MB (2x256MB) PC2-3200 ECC DDR2 RDIMM Kit90P1218 73P3522 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit73P2873 73P2865 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit 273P2874 73P2866 2GB (2x1GB) PC2-3200 ECC DDR2 RDIMM Kit 2Note: 16GB of memory is supported, if/when a supported 2GB DIMM becomes available, via eight DIMM slots. Due to two-wayinterleaving, installation of memory DIMMs in matched pairs is required beginning with DIMM slots one and two, then three andfour, then five and six, then DIMM slots seven and eight. Memory-mirroring requires all installed DIMMs to match and effectivelyreduces available memory by half. Hot-spare memory requires all installed DIMMs to match except for the last pair which must be ofequal size or greater than other installed pairs.1. Quantity two of each SBB PN must be ordered to equal its corresponding option.2. Supports Chipkill. Mixing Chipkill DIMMs with nonChipkill DIMMs will disable all Chipkill function.ModelStd. DIMM Configuration0xY1xx, 2xx, 3xx,4xx2 x 256MB PC2-3200 ECC DDR2 RDIMM2 x 512MB PC2-3200 ECC DDR2 RDIMM146 Configuration and Options Guide


Refer to the Important Notices section for important noticesDIMM 1 (J1)DIMM 2 (J2)DIMM 3 (J3)DIMM 4 (J4)DIMM 5 (J5)DIMM 6 (J6)DIMM 7 (J7)DIMM 8 (J8)Microprocessor 1 (J22)Microprocessor 2 (J23)Battery(BH1)VRM (J72)RemoteSupervisorAdapter IISlimLine (J21)PCI low-profile card (J18)xSeries 346 system boardServeRAID-7k card (J19)PCI riser card (J73)xSeries 346 Internal CablingxSeries 346 models are cabled internally with a single, 1-drop LVD SCSI cable, connecting one channel ofthe integrated, dual-channel Ultra320 SCSI controller to the hot-swap backplane. The second SCSI channelis wired to an external 0.8mm VHDCI SCSI connector.A single IDE device is supported in all models.Chapter 17. xSeries 346 147


xSeries 346 Hard Disk Drive (HDD) and Optical Storage OptionsSBBNumberOptionNumberDescription Height BaysSupported 1Max QtyHot-swap Ultra320 HDDs90P1328 90P1304 36.4GB 10K rpm Ultra320 SCSI HDD SSL 1 .. 6 690P1329 90P1305 73.4GB 10K rpm Ultra320 SCSI HDD SSL 1 .. 6 690P1336 90P1319 73.4GB 15K rpm Ultra320 SCSI HDD SSL 1 .. 6 690P1330 90P1306 146.8GB 10K rpm Ultra320 SCSI HDD SSL 1 .. 6 6Optical Devices 259P5800 22P7047 8x Max DVD-ROM Drive Ultra-Slim 8 1External Storage Expansion Units 3Form Factor- 17331RU EXP400 Storage Expansion Unit Rack (3U)- 171010U FAStT EXP100 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 1724100 FAStT100 Storage Server Rack (3U)- 172260U FAStT600 Storage Server Rack (3U)- 24P8215 FAStT600 Turbo Storage Server Rack (3U)- 17226LU FAStT600 Entry Storage Server Rack (3U)- 35421RU FAStT200 Storage Server 4Rack (3U)- 35422RU FAStT200 HA Storage Server Rack (3U)- 19K1121 FAStT200 Redundant RAID Controller -1. Installation may require removing standard devices.2. All models ship standard with an 8X Max DVD-ROM drive.3. An optional SCSI, RAID or Fibre controller is required in order to attach to the system.4. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).Bay UsageBay Form Factor Height Front Access Usage1 89mm (3.5in) SSL Yes HDD2 89mm (3.5in) SSL Yes HDD3 89mm (3.5in) SSL Yes HDD4 89mm (3.5in) SSL Yes HDD5 89mm (3.5in) SSL Yes HDD6 89mm (3.5in) SSL Yes HDD7 89mm (3.5in) SSL Yes Std. FDD8 133mm (5.25in) Ultra-Slim Yes Std. Optical148 Configuration and Options Guide


Refer to the Important Notices section for important noticesBay 1Bay 2Bay 3Bay 4Bay 5Bay 6Bay 7Bay 8xSeries 346 front viewxSeries 346 I/O OptionsSBB NumberOptionNumberDescriptionAdapterLengthPCI SupportSlotsSupportedHot-Plug1Storage Controllers02R0996 02R0988 ServeRAID-6M Controller (256MBCache) 2Full 64-bit/133MHz 3, 4 -02R0995 32P0033 ServeRAID-6M Controller (128MBCache) 2 Full 64-bit/133MHz 3, 4 -71P8614 71P8594 Single Channel Ultra320 SCSI Controller Half 64-bit/133MHz 1 ... 4 -Fibre Storage Controllers andOptions 324P2334 00N6881 FAStT Host Adapter Half 64-bit/66MHz 3, 4 -24P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 1 ... 4 -- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 1724100 FAStT100 Storage Server - - - -- 172260U FAStT600 Storage Server - - - -- 24P8215 FAStT600 Turbo Storage Server - - - -- 17226LU FAStT600 Entry Storage Server - - - -- 17421RU FAStT700 Storage Server - - - -- 174290U FAStT900 Storage Server - - - -Networking31P9605 31P9601 PRO/1000 MT Server Ethernet Adapterby Intel- 73P2701 PRO/1000 MT Dual Port Server EthernetAdapter by Intel32P9298 31P6401 NetXtreme 1000 T Dual Port EthernetAdapter (copper)Half 64-bit/133MHz 1 ... 4 -Half 64-bit/133MHz 1 ... 4 -Half 64-bit/133MHz 1 ... 4 -25P2889 06P3601 10/100 Ethernet Server Adapter Half 32-bit/33MHz 1 ... 4 -System Management73P9342 73P9341 Remote Supervisor Adapter II SlimLine 4- - - -Other I/O- 1519200 Integrated xSeries Adapter for iSeries 5 Full 64-bit/66MHz 4 5- 31P7201 V.90 Data/Fax Soft Modem6 Half 32-bit/33MHz 1 ... 4 -1. xSeries 346 does not have any Active-PCI slots.2. Supported for external attachment only and not for internal HDDs.3. See Fibre Channel Solutions Overview section for additional configuration information.4. Installs into a dedicated slot. Does not consume a PCI slot. Quantity one allowed.Chapter 17. xSeries 346 149


TX/RXLINKTX/RXLINK5. The Integrated xSeries Adapter for iSeries allows interconnectivity with an IBM eServer iSeries server. This card occupies two slot positions.The Remote Supervisor Adapter II Slimline must also be installed.6. Due to homologation variances, modem availability may differ by country.xSeries 346 rear viewPCI 1PCI 2PCI 3PCI 4Slot 1: Bus A, 64-bit, 100MHz, 3.3v, PCI-X, low-profile, halflengthSlot 2: Bus A, 64-bit, 100MHz, 3.3v, PCI-X, low-profile, halflengthSlot 3: Bus B, 64-bit, 133MHz, 3.3v, PCI-X, full-lengthSlot 4: Bus C, 64-bit, 133MHz, 3.3v, PCI-X, full-lengthxSeries 346 Power and AccessoriesOption NumberDescriptionPower 126K5097625w Hot-Swap Power Supply (North America)26K5098 625w Hot-Swap Power Supply (Worldwide) 2Rack Mount Uninterruptible Power Supply (UPS) 332P102032P1022APC 2U Smart-UPS 1400RMBAPC 2U Smart-UPS 1400RMiB2130R30 UPS3000XLV 42130R31 UPS3000XHV 437L6861 APC Smart-UPS 5000RMB 537L6862 APC Smart-UPS 5000RMiB 51. xSeries 346 ships with a single 625w hot-swap capable power supply, a rack power cable and line cord. A second hot-swap powersupply is optional for redundancy.2. Does not ship with a line cord.3. For runtimes and UPS attributes, see Appendix C: UPS Runtime Estimate.4. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.5. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.150 Configuration and Options Guide


Refer to the Important Notices section for important noticesSBB Number Option Number Description- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion Option- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 2x8 Console Switch- 28L3644 Space Saver II Keyboard 2Rack Console Connectivity 1Keyboard and Mouse- 31P7415 Preferred Pro Full-size Keyboard - 104 Keys, business black 3- 31P8950 USB Keyboard with UltraNav - US English- 33L3244 Sleek USB Mouse- 28L3673 Sleek 2-Button Mouse, business blackNote: Refer to the Rack Cabinets and Options section for information concerning IBM racks and rack-supported devices.1. USB accessories are not compatible with the NetBAY console switches. They attach to a single USB-capable server.2. Installation within a rack requires an optional keyboard tray (P/N 28L4707) or a monitor console kit.3. Installation within a rack requires an optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel display.Chapter 17. xSeries 346 151


xSeries 346 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupportedStorageInterfaceForm FactorExt Tape Encl- 71P9145 36/72GB DDS/5 Internal SCSI Tape Drive 5+6 1Ultra2(16-bit)89mm (3.5in) HH or133mm (5.25in) HH-- 59P6719 40/80GB DLT VS80 Internal SCSI TapeDrive- Ultra2(16-bit)133mm (5.25in) HH -- 59P6746 80/160GB VXA-2 SCSI Tape Drive - Ultra2(16-bit)- 59P6717 100/200GB LTO Tape Drive - Ultra2(16-bit)133mm (5.25in) HH -133mm (5.25in) HH -71P9187 59P6745 80/160GB DLT VS160 SCSI Tape Drive - Ultra160(16-bit)133mm (5.25in) HH45591UX- 00N8016 100/200GB LTO Tape Drive - Ultra2(16-bit)- 59P6736 160/320GB SDLT SCSI Tape Drive Option - Ultra2(16-bit)- 59P6744 200/400GB LTO Full-High Tape Drive - Ultra2(16-bit)133mm (5.25in) FH -133mm (5.25in) FH -133mm (5.25in) FH -Tape Autoloaders- 36232LX 200/400GB 2U LTO Generation 2 TapeAutoloader 3623 Model 2LX- 360716X 3607 Series 1760GB/3.5TB SDLTpro TapeAutoloaderExternal Tape Enclosures- Ultra160(16-bit)- Ultra2(16-bit)2U Rack -2U Rack -- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160(16-bit)1U Rack -- 4559HHX Half-High Tape Enclosure - Ultra160(16-bit)- 4559FHX Full-High Tape Enclosure - Ultra160(16-bit)Desktop or Rack Shelf(2.52in tall)Desktop or Rack Shelf(4.41in tall)--- 3503B1X Full-High SCSI Tape Enclosure - Ultra2(16-bit)Desktop or 3U Rack -Associated Options73P9756 73P9711 Tape Drive Enablement Kit 25+6 - - -Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes andTape Library Attributes appendices, respectively.1. For internal use, requires installation of the optional Tape Drive Enablement kit.2. Requires installation of an optional SCSI controller and occupies bays 5 and 6. SCSI cable is provided.152 Configuration and Options Guide


Chapter 18. xSeries 365xSeries 365 At-A-GlancePart Number 1, 2Processors/FSB Speed (GHz/MHz) 3Number of Processors (Std/Max)CacheMemory (Std/Max) 4, 5Form FactorPower Supply Quantity (Std/Max) 6Hot-Swap (Power, Slots, HDD, Fans)Redundancy (Optional, Standard)System Management Adapter 7Onboard Ethernet 8Storage Controller 9Removable Media Bays (Total/Avail)Internal HDD Storage (Std/Max) 10CD-ROM (IDE)Bays (Total/Avail)Slots (Total/Avail) 78861-1RX 112/400 1/4 1MBL31GB/32GB Rack (3U) 1/2 P, S,H, FO -Power,S - FansYDual1GBDualU3202/00/880.8GB 24x-10x 8/6 6/5118861-4RX 2.2/400 1/4 2MBL31GB/32GB Rack (3U) 1/2 P, S,H, FO -Power,S - FansYDual1GBDualU3202/00/880.8GB 24x-10x 8/6 6/58862-1RX 2/400 1/4 1MBL32GB/32GB Rack (3U) 1/2 P, S,H, FO -Power,S - FansYDual1GBDualU3202/00/880.8GB 24x-10x 8/6 6/58862-4RX 2.2/400 1/4 2MBL32GB/32GB Rack (3U) 1/2 P, S,H, FO -Power,S - FansYDual1GBDualU3202/00/880.8GB 24x-10x 8/6 6/58862-5RX 2.7/400 2/4 2MBL32GB/32GB Rack (3U) 2/2 P, S,H, FS - Power,S - FansYDual1GBDualU3202/00/880.8GB 24x-10x 8/6 6/58862-6RX 3.0/400 2/4 4MBL32GB/32GB Rack (3U) 2/2 P, S,H, FS - Power,S - FansYDual1GBDualU3202/00/880.8GB 24x-10x 8/6 6/51. xSeries 365 also provides a FDD, three USB ports (one in front and two in rear), one serial port (RS-232), one RXE-100 expansion port (RS-485) andone RXE-100 management port (RS-485).2. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See Rack Cabinets and Options section for supportedIBM racks.3. Intel Xeon processor with advanced transfer L2 cache, an additional L3 cache and a 400MHz (quad-pumped) Front Side Bus (FSB).4. xSeries 365 uses DDR PC2100, Advanced Chipkill memory DIMMs and is capable of memory mirroring.5. Memory mirroring and the maximum supported amount of memory require the optional 16 DIMM memory card. 16GB of memory is supportedin base system. See x365 Memory section for more information.6. Power is provided by either one or two 950w power supplies depending on model. N+1 power supply redundancy is provided standard in modelswith two power supples and is optional in models with one power supply.7. Advanced system management is provided by a standard Remote Supervisor Adapter II installed in slot 1, allowing for five additional PCI adapters.8. Integrated dual-port Broadcom 5704 Gigabit Ethernet controller.9. The integrated dual-channel U320 SCSI controller (LSI 53C1030) supports HDD mirroring and provides one external port and one internal port.10. Maximum storage capacity is based on six 146.8GB hot-swap HDDs.11. The 8861 machine type carries a one year limited parts and labor warranty. 8862 carries a three year limited parts and labor warranty.xSeries 365 Processor OptionsSBBNumberOptionNumberProcessor UpgradesSMPSupport 173P6953 73P7073 2GHz/400MHz-1MB L3 Cache Xeon Processor MP 1RX13N0191 13N0712 2.2GHz/400MHz-2MB L3 Cache Xeon Processor MP 4RX13N0192 13N0711 2.7GHz/400MHz-2MB L3 Cache Xeon Processor MP 5RX13N0193 13N0710 3.0GHz/400MHz-4MB L3 Cache Xeon Processor MP 6RX1. A maximum of four processors can be installed. All processors must be identical in type, speed andcache size. Install processors in the order indicated in the diagram below.153


xSeries 365 processor boardxSeries 365 Memory OptionsSBBNumberOptionNumberMemory Description 1, 237L3538 33L5038 512MB PC2100 ECC DDR RDIMM73P2106 73P2031 1GB PC2100 ECC DDR RDIMM73P2572 73P2030 2GB PC2100 ECC DDR RDIMM73P7026 73P9710 Memory Upgrade Card 31. x365 memory supports Chipkill, mirroring and memory ProteXion technologies.2. Installation of memory DIMMs in matched pairs is required. DIMMsmust be installed in sets of four in order to enable mirroring which requiresinstallation of the optional memory upgrade card. 32GB of memory is supportedvia 16-DIMM slots when the optional memory upgrade card is installed.16GB is supported via 8 DIMM slots in base systems that ship withthe 8-DIMM memory card.3. Optional 16-DIMM memory card that replaces the standard 8-DIMMmemory card. This card is required in order to support maximum amountof memory and to enable memory mirroring. Partial memory mirroring isnot supported. If configured with “N” capacity of memory in Port 1, and“N+z” memory in Port 2 and memory mirroring is enabled, then “N”amount of memory is available to the system, and “z” amount of memoryis not usable.8-DIMM Memory Card Installation OrderPair #1st2nd3rd4thLocationDIMM1 and DIMM5DIMM2 and DIMM6DIMM3 and DIMM7DIMM4 and DIMM8154 Configuration and Options Guide


Refer to the Important Notices section for important notices16-DIMM Memory Card Installation Order (non-mirrored mode)Pair #1st2nd3rd4th5th6th7th8thLocationDIMM1 & DIMM3DIMM14 & DIMM16DIMM2 & DIMM4DIMM13 & DIMM15DIMM5 & DIMM7DIMM10 & DIMM12DIMM6 & DIMM8DIMM9 & DIMM1116-DIMM Memory Card Installation Order (mirrored mode)Quad #1st2nd3rd4thLocationDIMM1 & DIMM3, DIMM14 & DIMM16DIMM2 & DIMM4, DIMM13 & DIMM15DIMM5 & DIMM7, DIMM10 & DIMM12DIMM6 & DIMM8, DIMM9 & DIMM118-DIMM memory cardChapter 18. xSeries 365 155


16-DIMM memory cardxSeries 365 Internal CablingThe xSeries 365 mechanical contains six hot-swap HDD bays, one slim 3.5in and one slim 5.25in media bay.The integrated SCSI controller is connected to the hot-swap backplane via a 16-bit LVDS cable.The standard optical drive and floppy connect directly to a media card which is cabled to the system board.External SCSI device attachment is provided via a 0.8mm VHDCI port on the rear of the system chassis,which is cabled to the second channel of the integrated SCSI controller. For internal SCSI tape support, thiscable will be disconnected from the SCSI channel and left clipped to the inside of the mechanical, leavingthe external port in place, though not usable. The SCSI cable for the tape can now be connected to theintegrated SCSI controller.156 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 365 Hard Disk Drive (HDD) and Optical Storage OptionsSBBNumberOptionNumberDescription Height BaysSupported 1MaximumQuantityHot-swap Ultra320 HDDs32P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-Swap HDD SL 3 ... 8 632P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-Swap HDD SL 3 ... 8 632P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-Swap HDD SL 3 ... 8 632P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-Swap HDD SL 3 ... 8 632P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-Swap HDD SL 3 ... 8 6Optical Devices59P5800 22P7047 8x Max Slimline DVD-ROM Drive 1 SL 1 1External Storage Expansion Units 2Form Factor- 17331RU EXP400 Storage Expansion Unit Rack (3U)- 171010U FAStT EXP100 Storage Expansion Unit Rack (3U)- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 172260U FAStT600 Storage Server Rack (3U)- 17226LU FAStT600 Entry Storage Server Rack (3U)- 17421RU FAStT700 Storage Server Rack (4U)- 174290U FAStT900 Storage Server Rack (4U)- 35421RU FAStT200 Storage Server Rack (3U)- 35422RU FAStT200 HA Storage Server Rack (3U)- 19K1121 FAStT200 Redundant RAID Controller 3--- 1724100 FAStT100 Storage Server Rack (3U)1. Requires removing and replacing the standard optical drive.2. To configure an external SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllersto confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansionunit options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre Channel Solutions Overviewsection.3. Upgrades the FAStT200 Storage Server to FAStT200 HA Storage Server.Bay Form Factor Height Front Access Usage1 133mm (5.25in) SL Yes Std. Optical2 89mm (3.5in) SL Yes Std. FDD3 89mm (3.5in) HS SL Yes HDD4 89mm (3.5in) HS SL Yes HDD5 89mm (3.5in) HS SL Yes HDD6 89mm (3.5in) HS SL Yes HDD7 89mm (3.5in) HS SL Yes HDD8 89mm (3.5in) HS SL Yes HDDChapter 18. xSeries 365 157


xSeries 365 front viewxSeries 365 I/O OptionsSBBNumberPartNumberDescriptionAdapterLengthPCI Support 1SlotsSupported 2Hot-PlugCapableStorage Controllers 302R0996 02R0988 ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz 2 ... 6 X02R0995 32P0033 ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 2 ... 6 X- 13N2190 4ServeRAID-6i+ Controller Half 64-bit/133MHz 2 -24P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit/66MHz 2 ... 6 X24P2650 19K4646 PCI Wide Ultra160 SCSI Adapter Half 64-bit/66MHz 2 ... 6 -1. Adapters rated at a lower frequency than the slots in which they are installed will reduce the bus to the frequency of the slowest adapter.2. xSeries 365 includes the Remote Supervisor Adapter II (RSA II) installed in PCI slot 1. Connection to other servers requires the AdvancedSystem Management Interconnect Cable Kit.3. xSeries 365 includes an integrated dual channel Ultra320 SCSI controller and provides one internal and one external connector.158 Configuration and Options GuideFibre Storage Controllers and Options 524P2334 00N6881 FAStT Host Adapter Half 64-bit/66MHz 2 ... 6 -24P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 2 ... 6 X- 174290U FAStT900 Storage Server (US line cord) - - - -- 17421RU FAStT700 Storage Server - - - -- 172260U FAStT600 Storage Server (US line cord, English pubs) - - - -- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 1724100 FAStT100 Storage Server - - - -- 3534F08 TotalStorage SAN Switch F08, 8-port - - - -- 2109F16 SAN Fibre Channel Switch, 16-Port - - - -Networking 625P2889 06P3601 10/100 Ethernet Server Adapter Half 32-bit/33MHz 2 ... 6 X32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit/133MHz 2 ... 6 X31P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) Half 64-bit/133MHz 2 ... 6 XSystem Management 2- 03K9309 Advanced System Management Interconnect Cable Kit 7 - - - -Other I/O- 8684-1RX RXE-100 Remote Expansion Enclosure 8 - - - -- 1519100 Integrated xSeries Adapter for iSeries 9 Full 64-bit/66MHz 3 9 -


Refer to the Important Notices section for important notices4. Not supported in RXE-100 when connected to this system.5. See Fibre Channel Solutions Overview section for additional configuration information.6. xSeries 365 includes an integrated Broadcom 5704 10/100/1000 dual-port Ethernet controller (copper) with Wake on LAN support.7. Required to connect the standard Remote Supervisor Adapter II to an interconnect network with other servers for system management supportthrough a single LAN or modem connection.8. xSeries 365 supports a maximum of one RXE-100 per server. One RXE-100 can be shared between two x365 systems providing fail-over supportor capability to add up to six additional PCI slots per server.9. The Integrated xSeries Adapter for iSeries allows interconnectivity with an IBM eServer iSeries server. This card occupies two slot positions.RSA: standard Remote Supervisor AdapterSlot 1: Bus 0, 33MHz, 64-bit, full-length, 3.3v, Active-PCI (contains pre-installed RSA II)Slot 2: Bus 3, 100MHz, 64-bit, full-length, 3.3v, Active PCI-X for 100MHz or higher adaptersSlot 3: Bus 6, 133MHz, 64-bit, full-length, 3.3v, Active-PCI-XSlot 4: Bus 9, 133MHz, 64-bit, full-length, 3.3v, Active-PCI-XSlot 5: Bus C, 133MHz, 64-bit, full-length, 3.3v, Active-PCI-XSlot 6: Bus F, 133MHz, 64-bit, full-length, 3.3v, Active-PCI-XScan sequence: Slot 1, 2, 3, 4, 5, 6Continuing in optional RXE-100: Slot 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18xSeries 365 rear viewChapter 18. xSeries 365 159


xSeries 365 Power and AccessoriesSBBNumberOptionNumberDescriptionPower 173P7052 73P9709 950w Hot-swap Power Supply (U.S.) 2- 73P7214 950w Hot-Swap Power Supply (International) 2- 2130R30 UPS3000XLV- 2130R31 UPS3000XHV- 32P1020 APC 2U Smart-UPS 1400RMB- 32P1692 UPS Extend Run Battery Pack160 Configuration and Options GuideUninterruptible Power Supply (UPS) 3Monitors 4- 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), stealth black 5- 63324HN E74 Color Monitor 17in (406mm, 16in viewable image), stealth black 5- 32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 6- 32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 6- 6734HB0 L170p ThinkVision 17in LCD Flat Panel Monitor (432mm, 17in viewable image),business black- 6636AB1 ThinkVision L150 15in LCD Flat Panel Monitor, (381mm, 15in viewable image),business black- 6636HB1 L150p ThinkVision 15in LCD Flat Panel Monitor (381mm, 15in viewable image),business blackRack and NetBAY 7- - Refer to Rack Cabinets and Options section for information concerning IBM racks andrack-supported devices.- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 73P5832 USB Conversion Option (four-pack) 9Console Connectivity 8Keyboard and Mouse 1002R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys, business black 1132P8917 28L3644 12, 13Space Saver II Keyboard02R3421 28L3673 Sleek 2-Button Mouse, business black13M7124 06P4069 USB Optical Wheel Mouse1. xSeries 365 systems include either one or two 950w hot-swap power supplies depending on model. N+1 redundancyis standard on systems that ship with two power supplies. One 4.3m/14ft IEC 320-C19 to IEC 320-C14power cable ships per installed power supply.2. Available for models with one power supply installed. Provides N+1 redundancy.3. For runtimes and UPS attributes see Appendix: UPS Runtime Estimate.4. xSeries 365 video is provided by the installed RSA II via an ATI Radeon RV-100. The integrated ATI RageXLvideo is disabled when the RSA II adapter is installed.5. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).6. Includes a 15in Flat Panel Monitor.7. xSeries 365 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinetsand Options section.8. Refer to the Rack Console Options section for information regarding console connectivity using these options.9. Required to connect one of the USB ports on the server to either a Local or Remote Console Manager. This optionkit contains four 1.5m USB conversion option cables, four 14in lengths of Cat5 cable, four large curly-lockcable connectors and an eight-pack of velcro strips.


Refer to the Important Notices section for important notices10. xSeries 365 supports rack configurations only and ships without a keyboard or mouse.11. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboardtry with a flat panel display.12. Installation within a rack requires optional keyboard tray (P/N 28L4707), or a NetBAY 1U or 2U Flat PanelMonitor Console Kit.13. Advanced TrackPoint IV features are not available on IBM xSeries systems.xSeries 365 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupported 1StorageInterfaceForm FactorExt TapeEnclosures 149P3225 00N8016 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0X24P7303 59P6736 160/320GB SDLT SCSI Tape Drive Option - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0X71P9165 59P6744 200/400GB LTO Full-High Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B0XTape Autoloaders- 36232LX 200/400GB 2U LTO Generation 2 TapeAutoloader 3623 Model 2LX- 360716X 3607 Series 1760GB/3.5TB SDLTpro TapeAutoloader- 360726X 3607 Series 1.6TB/3.2TB LTO TapeAutoloader;- Ultra160 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- 18P9133 TotalStorage Ultrium LVD Tape Drive 3580Model L23External Tape Enclosures- Ultra160 (16-bit) Stand-alone or5U Rack 2-- 3503B1X Full-High SCSI Tape Enclosure 3- 0034B0X NetBAY Tape Enclosure (Rack Mount) 4- Ultra2 (16-bit) Desktop or 3U Rack -- Ultra2 (16-bit) 4U Rack -- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160 (16-bit) 1U Rack -External Tape Libraries 5- 18P9212 TotalStorage Ultrium LVD Tape Library 3582Model L23 4 - Ultra160 (16-bit) Stand-alone or4U Rack 6 -- 18P9337 TotalStorage Ultrium Fibre Tape Library- 2Gb Fibre3582 Model F23 4 ChannelStand-alone or4U Rack 6-- 4560SLX SDLT/LTO Modular Tape Library - Ultra2 (16-bit) 5U Rack -Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. xSeries 365 does not support internal tape drives. An external tape library or internal tape drive with a tape enclosure, can be connected to theUltra320 0.8mm VHDCI external SCSI connector. Select tape drive and enclosure, then use Appendix D: Cables - Storage Units - Controllers toselect an appropriate external cable.2. Rack mount requires an optional rack kit. See tape drive appendix for more information.3. An external cable is included. Requires a fixed shelf if installed in a rack (allow an additional 1U in rack for fixed shelf).4. External cables are not included.5. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.6. Rack mount kit is standard. Stand-alone kit is optional. See tape drive appendix for more information and options.Chapter 18. xSeries 365 161


162 Configuration and Options Guide


Chapter 19. xSeries 382xSeries 382 At-A-GlancePart Number1, 2, 3Processor/FSB Speed (GHz/MHz) 4Number of Processors (Std/Max)L3 ECC CacheMemory (Std/Max) 5Form FactorPower Supply Quantity (Std/Max) 6Hot-Swap (Power, Slots, HDD, Fans)Redundancy (Optional, Standard)System Management ProcessorOnboard Ethernet (Mbps)Storage Controller 6Removable Media Bays (Total/Avail)Internal HDD Storage (Std/Max) 7Optical Drive (IDE)Bays (Total/Avail)Slots (Total/Avail) 88834-21X 1.4/4002/2 1.5MB 2GB/16GB Rack(2U)2/3 9H, P9 S-F, O- Y 2x10/100/P 9 1000DualU3201/0 73.4/293.6GB 78x DVD-CD/RW3/1 3/38834-32X 1.5/4002/2 6MB 4GB/16GB Rack(2U)2/3 9 H, P9 S-F, O- Y 2x10/100/P 9 1000DualU3201/0 146.8/293.6GB 78x DVD-CD/RW3/0 3/31. xSeries 382 also provides four USB ports (two in front and two in rear), one serial port (RJ-45) and two video connectors (one in front and one inrear). It does not provide a floppy diskette drive. xSeries 382 installs into a 19in rack-mountable drawer and ships standard without a keyboard ormouse. See Rack Cabinets and Options section for supported IBM racks.2. All models include a three-year parts and labor warranty.3. Differing configurations are available via Special Bid. Orders have an approximate lead time of 14 weeks.4. Intel Itanium 2 processors with 6MB full-speed L3 cache.5. Four 512MB RDIMMs are standard on model 21X; Eight are standard on model 32X.6. The dual-channel, Ultra320 integrated controller supports RAID-1 mirroring. Mirrored HDDs must match.7. One 73.4GB HDD is standard on model 21X; two are standard on model 32X. Maximum storage is based on two 146.8GB SCSI HDD and requirereplacing the standard HDDs.8. Three full-length, 64-bit, PCI-X slots (two 100MHz, one 133MHz).9. Two 350w power supplies are standard. Redundancy and ability to hot-swap power supplies require a third power supply which is availablevia special bid.xSeries 382 Memory OptionsPart Number Memory Description 1, 233L503733L503833L503933L5040256MB PC 2100 ECC DDR SDRAM RDIMM512MB PC2100 ECC DDR SDRAM RDIMM1GB PC2100 ECC DDR SDRAM RDIMM2GB PC2100 ECC DDR SDRAM RDIMM1. DIMMs must be installed in matched sets of four witha total of eight DIMMs supported.2. Only an IBM Trained Servicer can install or configureinternal options in this system.xSeries 382 Internal SCSI CablingxSeries 382 supports two hot-swap SCSI HDDs on a DASD backplane. The backplane is connected to theintegrated U320 dual-channel SCSI controller through a 16-bit nonterminated SCSI cable. The standardoptical drive is attached to the IDE connector using a single-drop IDE cable.External SCSI device attachment, such as a tape enclosure, is facilitated by a dedicated 0.8mm VHDCI porton the rear of the system chassis, which is connected to the second channel of the integrated controller.163


xSeries 382 Hard Disk Drive (HDD) Storage OptionsPartNumberDescription Height BaysSupportedMaximumQuantityHot-swap Ultra320 SCSI HDDs32P0726 36.4GB 10Krpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0727 73.4GB 10Krpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0728 146.8GB 10Krpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0734 36.4GB 15Krpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0735 73.4GB 15Krpm Ultra320 SCSI Hot-swap HDD SL 1, 2 2External Storage Expansion Units 1Form Factor17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)35421RU FAStT200 Storage Server Rack (3U)35422RU FAStT200 HA Storage Server Rack (3U)1. xSeries 382 includes one external SCSI connector. If necessary, select an optional SCSI controller, then refer to Appendix D: Cables- Storage Units - Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select asupported cable. For HDD or other expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices,refer to the Fibre Channel Solutions Overview section.Bay Form Factor Height Front Access Usage1 Hot-swap or fixed 89mm (3.5in) SL Yes Standard HDD2 Hot-swap or fixed 89mm (3.5in) SL Yes StandardHDD/HDD 13 89mm (3.5in) Slim Yes Standard optical1. Bay 2 is used for the standard HDD on model 32X; it is open on model 21X.164 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 382 I/O OptionsOptionNumberDescriptionAdapterLengthPCISupportSlots Supported 1Hot-PlugPCI VoltageKeyMHzStorage Controllers 271P8594 Single Channel Ultra320 SCSI Controller 302R0988 ServeRAID-6M Controller (256MB Cache) 4Half 64-bit 1, 2, 3 - Universal 133Full 64-bit 1, 2, 3 - - 13332P0033 ServeRAID-6M Controller (128MB Cache) 4 Full 64-bit 1, 2, 3 - - 13306P5740 ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit 1, 2, 3 X - 66Fibre Storage Controllers and Options 524P0960 FC2-133 Host Bus Adapter Half 64-bit 1, 2, 3 - Universal 133174290U FAStT900 Storage Server - - - - - -17421RU FAStT700 Storage Server - - - - - -35421RU FAStT200 Storage Server - - - - - -35422RU FAStT200 HA Storage Server - - - - - -Networking22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit 1, 2, 3 - Universal 13331P6301 NetXtreme 1000 T Ethernet Adapter (copper) Half 64-bit 1, 2, 3 - Universal 13331P6401NetXtreme 1000 T Dual Port Ethernet Adapter(copper)Half 64-bit 1, 2, 3 - Universal 1331. Five volt signaling adapters are not supported.2. xSeries 382 has a dual-channel, Ultra320 integrated controller which supports RAID-1 mirroring. Provided are one internal and one externalSCSI connector.3. Single channel Ultra320 SCSI Controller (P/N 71P8594) provides a single channel with one 68-pin internal connector, a four-drop multimodeterminated LVD SCSI cable and one external 0.8mm VHDCI connector. Only one of the two connectors may be utilized. Hardware is included inthe option to support either low-profile (2U) or full-size (3U) installations.4. Supported for external connections only.5. See Fibre Channel Solutions Overview section for additional configuration information.PCI 1: Bus A, 133MHz, 64-bit, 3.3v, full-length, PCI-XPCI 2: Bus A, 100MHz, 64-bit, 3.3v, full-length, PCI-XPCI 3: Bus A, 100MHz, 64-bit, 3.3v, full-length, PCI-XxSeries 382 rear viewChapter 19. xSeries 382 165


xSeries 382 Power and AccessoriesPartNumberDescriptionMonitors633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 163324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black 132P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 232P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 2Rack and NetBAY 3, 4Refer to the Rack Cabinets and Options section for information concerning IBM racks andrack-supported devices.Console Connectivity 51735L041735R16NetBAY Local Console ManagerNetBAY Remote Console ManagerKeyboard and Mouse06P406931P740531P870031P7410USB Optical Wheel MouseOptical 3-button ScrollPoint Mouse - 800dpi - PS/2 and USBOptical 3-button ScrollPoint Pro Mouse - 800dpi - PS/2 and USBOptical 3-button Travel Wheel Mouse - 800dpi - PS/2 and USBUSB Devices22P9025256MB USB 2.0 Memory Key1. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).2. Includes a 15in Flat Panel Monitor.3. xSeries 382 is housed in a 19in rack-mountable drawer and requires one of the racks listed in theRack Cabinets and Options section.4. Note limitations and restrictions required for adequate cooling in the Rack Cabinets and Optionssection. If non-IBM racks are to be used, assure that both front and rear doors offer a minimum of48% open area uniformly distributed and in line with installed servers. A clearance of 51 to 64mm (2to 2.5in) must be maintained between the front door and the system unit’s front bezel. The rear doormust maintain the same or greater clearance.5. Refer to the Rack Console Options section for information regarding console connectivity usingthese options.166 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 382 Tape OptionsOptionNumberTape DrivesBaysSupported 1StorageInterfaceForm FactorExt TapeEnclosures 159P6745 80/160GB DLT VS160 SCSI Tape Drive - Ultra160(16-bit)Tape Autoloaders133mm (5.25in)HH45591UX36232LX200/400GB 2U LTO Generation 2 TapeAutoloader 3623 Model 2LX- Ultra(16-bit)2U Rack -External Tape Enclosures45591UX NetBAY 1U Tape Enclosure (Rack Mount) 2- Ultra160(16-bit)1U Rack -45591UX NetBay 1U xSeries Tape Enclosure - Ultra160(16-bit)1U Rack -Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape DriveAttributes and Tape Library Attributes appendices, respectively.1. xSeries 382 does not support internal tape drives. An external tape library or internal tape drive with a tape enclosure,can be connected to the Ultra320 0.8mm VHDCI external SCSI connector. Select tape drive and enclosure, then use AppendixD: Cables - Storage Units - Controllers to select an appropriate external cable.2. External SCSI cables are included.Chapter 19. xSeries 382 167


168 Configuration and Options Guide


Chapter 20. xSeries 445xSeries 445 At-A-GlancePart Number 1, 2Processors/FSB Speed (GHz/MHz)Number of Processors 3CacheMemory (Std/Max) 4Form FactorPower Supply Quantity (Std/Max) 5Hot-Swap (Power, Slots, HDD, Fans)Redundancy (Optional, Standard)System Management Adapter 6Onboard Ethernet (Mbps) 7SCSI Controller (Dual, Ultra, RAID) 8Removable Media Bays (Total/Avail)Internal HDD Storage (Std/Max) 9Optical Drive (IDE)Bays (Total/Avail)Slots (Total/Avail) 108870-11X 2.0/400 2/8 1MBL32GB/64GBRack(4U)2/2 P, S,H, FS-Fans,S-PowerYDual1GbDualU3202/0 0/293.6GB DVD-ROM 4/2 6/68870-12X 2.2/400 112/8 2MBL32GB/64GBRack(4U)2/2 P, S,H, FS-Fans,S-PowerYDual1GbDualU3202/0 0/293.6GB DVD-ROM 4/2 6/68870-22X 112.7/400 2/8 2MBL32GB/64GBRack(4U)2/2 P, S,H, FS-Fans,S-PowerYDual1GbDualU3202/0 0/293.6GB DVD-ROM 4/2 6/68870-3EX 3.0/400 122/4 512KBL22GB/64GBRack(4U)2/2 P, S,H, FS-Fans,S-PowerYDual1GbDualU3202/0 0/293.6GB DVD-ROM 4/2 6/68870-4EX 123.0/400 4/4 512KBL22GB/64GBRack(4U)2/2 P, S,H, FS-Fans,S-PowerYDual1GbDualU3202/0 0/293.6GB DVD-ROM 4/2 6/68870-42X 123.0/400 4/8 4MBL32GB/64GBRack(4U)2/2 P, S,H, FS-Fans,S-PowerYDual1GbDualU3202/0 0/293.6GB DVD-ROM 4/2 6/6Note: Refer to the Datacenter Solutions section for xSeries 445 DataCenter models.1. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See Rack Cabinets and Options section for supportedIBM racks.2. Availability in the U.S. is limited to the Large Enterprise Direct (LED) program or through EXAct Business Partner program members.3. Xeon MP models support up to eight processors each with the optional SMP Expansion Module installed. These models are expandable to 16-wayconfigurations via a connection to a second x445 MP chassis. Xeon DP models support up to four processors each with the optional SMP ExpansionModule installed.4. Advanced Chipkill ECC memory controller supports two-way interleaving, Memory ProteXion, memory mirroring and hot-swap installation if mirroringis enabled. Sixteen sockets are provided in standard models, four of which are populated with 512MB RDIMMs. An additional 16 sockets aresupported with the installation of SMP Expansion Module. Maximum memory configurations include 32 2GB RDIMMs.5. Two 1200w, voltage-sensing, hot-swap power supplies that support N+1 redundancy on full configurations are standard.6. Advanced system management is provided by the standard Remote Supervisor Adapter II installed in a dedicated slot.7. Broadcom dual-port 5704 10/100/1000 Ethernet controller.8. The LSI chipset in the dual-channel, Ultra320 integrated controller allows for two HDDs to be allocated for mirroring if a RAID adapter is not installed.Mirrored HDDs must be matched.9. Maximum internal storage is based on two 146.8GB Ultra320 hot-swap HDDs.10. Support for an additional 12 64-bit slots is available through installation of the optional RXE-100 Remote Expansion Unit. Refer to x445 I/O Optionsor the RXE-100 section for more information.11. Intel Xeon MP processor with integrated full-speed ECC L3 cache and 400MHz (quad-pumped) Front-side Bus (FSB).12. Intel Xeon DP processor with integrated full-speed ECC L2 cache and 400MHz (quad-pumped) Front-side Bus (FSB).169


xSeries 445 Processor OptionsSBBNumberOptionNumberProcessor Options 1SMPSupport02R2034 02R2062 2.0GHz/400MHz-1MB L3 Cache Xeon Processor MP 11X02R2243 13N0723 2.2GHz/400MHz-2MB L3 Cache Xeon Processor MP 12X02R2244 13N0722 2.7GHz/400MHz-2MB L3 Cache Xeon Processor MP 22X02R2245 13N0721 3.0GHz/400MHz-4MB L3 Cache Xeon Processor MP 42X02R1935 02R1870 SMP Expansion Module for Xeon MP Models 2, 3- 02R1871 SMP Expansion Module for Xeon DP Models 4, 311X, 12X, 22X,42X3EX02R2108 502R2013 x445 Two Chassis 16-way Configuration Kit 611X, 12X, 22X,42X1. xSeries 445 architecture supporting 2, 4, and 8-way configurations, optimizes memory and bus performanceusing an XA-32 core chipset with up to two CPU/memory cards and two PCI-X host-bridge controllers. Withthe optional SMP Expansion Module installed, up to eight Pentium Xeon MP processors are supported or up tofour Xeon DP processors. All processors must be identical in type, speed and cache size.2. Required for MP models to install processors five through eight. A total of eight processors required in systemwhen installed. Includes two 250mm/10in scalability cables.3. A minimum of two DIMMs must be installed on each SMP module board which may require purchasing additionalDIMMs or rearranging the standard DIMMs.4. Required to upgrade DP models from two to four Xeon processors. Includes two Xeon DP processors.5. The SBB includes one 2.5m scalability cable whereas the option contains four.6. Required to enable 16-way configurations by connecting two x445 Xeon MP chassis together. Includes four2.5m and two 250mm scalability cables, and an Ethernet crossover cable for use if both chassis are not connectedto an enterprise network.frontfanfanstandard CPU/memory modulepowersuppliesCPU 2CPU 3fanfanCPU 4Memory port 2CPU 1Memory port 1RDIMMs 9-16 RDIMMs 1-8170 Configuration and Options GuideNote: The figure depicts a Xeon MP model. Processors for DP models come preinstalled in correctlocations.Optional SMP expansion module for Xeon MP modules installs directly above standard CPU/memoryboard, requiring installation of four processors and a minimum of two DIMMs.


Refer to the Important Notices section for important noticesCPU 6CPU 7CPU 8Memory port 2CPU 5Memory port 1RDIMMs 9-16 RDIMMs 1-8Optional SMP Expansion ModuleNote: The figure depicts Xeon MP models. Processors for DP models come preinstalled in correct locations.Operating System InstanceRemoteI/OI/OBridgeI/OBridgeSys ManProcCEC #1CPUCPUCPUCPU123PCI-XThe figure is a logical diagram of SMP Expansion Module cabling for single node, four-way x445 runningone operating system.Scalability Ports(Forwarding)Scalability CableSMP Expansion Module legendChapter 20. xSeries 445 171


Operating System InstanceRemoteI/OI/O BridgeI/O BridgeSys MgtProcCEC #1CPUCPUCPUCPUCEC #2CPUCPUCPUCPU123321PCI-XThe figure is a logical diagram of SMP Expansion Module cabling (including scalability cables) for singlenode, eight-way x445 running one operating system.The figure is a logical diagram of SMP Expansion Module cabling for 16-way x445 (two eight-way models)running one operating system. The top SMP Expansion Modules in each chassis are labeled CEC #2.Scalability ports are shown top to bottom one to three.172 Configuration and Options Guide


Refer to the Important Notices section for important noticesB1 2 3 4 5 6SMPExpansionPortsRIO portsAprimary x445Scalability ports are numberedone to three from the left.RXE Management portssecondary x445B1 2 3 4 5 6SMPExpansionPortsRIO portsAxSeries 445 Memory OptionsSBB Number Option Number Memory Description 137L3538 33L5038 512MB DDR PC2100 ECC RDIMM33P3126 33L5039 1GB DDR PC2100 ECC RDIMM32P9223 33L5040 2GB DDR PC2100 ECC RDIMM1. Due to two-way interleaving, installation of memory DIMMs in banks of two is required.A minimum of two DIMMs are required for each SMP Expansion Module(minimum of four required to enable memory mirroring).Note:• Performance is optimized by balancing the amount of memory between ports (and between SMPExpansion Modules).• In order to enable memory mirroring during BIOS set-up, the same memory configuration must beinstalled in each port (memory mirroring reduces the amount of memory available to the operatingsystem by half).• Memory mirroring is specific to each SMP Expansion Module, but enabling mirroring in both SMPExpansion modules for eight-way systems is required.Chapter 20. xSeries 445 173


ack of planar1 2 3 4 5 6 7 8 9 10 1 12 13 14 15 16port 1: RDIMM 1-8 port 2: RDIMM 9-16front of planarNumber of RDIMM sockets on memory cardInstallation OrderPair #Location1st2nd3rd4th5th6th7th8thDIMM1 & DIMM3DIMM9 & DIMM11DIMM5 & DIMM7DIMM13 & DIMM15DIMM2 & DIMM4DIMM10 & DIMM12DIMM6 & DIMM8DIMM14 & DIMM16xSeries 445 Internal SCSI CablingxSeries 445 server contains four drive bays on the lower left front of the chassis. The bottom two side-bysidebays contain the standard DVD-ROM and 1.44MB diskette drive. Two 3.5in, SCA-2-compliant, slimline,hot-swap drive bays are located above these two bays.The EIDE DVD-ROM is cabled directly to the IDE port. The two hot-swap bays are connected to theintegrated Ultra320 SCSI controller through a 16-bit LVDS cable.An optional ServeRAID controller is supported for internal RAID applications. A separate16-bit LVDS SCSIcable is included with the system to attach the hot-swap backplane to the ServeRAID controller.The integrated Ultra320 SCSI controller supports HDD mirroring if the internal HDDs are matched.The Ultra320 SCSI controller contains a second channel that supports external SCSI devices. The controlleris connected to an external, industry-standard, 0.8mm VHDCI connector through a 16-bit LVDS cable.174 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 445 Hard Disk Drive (HDD) Storage OptionsSBBNumberOptionNumberDescription Height BaysSupported 1MaximumQuantityHot-swap Ultra320 SCSI HDDs 132P0746 32P0726 36.4GB 10Krpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0747 32P0727 73.4GB 10Krpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0748 32P0728 146.8GB 10Krpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0744 32P0734 36.4GB 15Krpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0745 32P0735 73.4GB 15Krpm Ultra320 SCSI Hot-swap HDD SL 1, 2 2Removable Media 232P9070 08K9603 ThinkPad Removable Diskette Drive 3Bays Supported348P8072 05K9233 ThinkPad 24x-10x CD-ROM Ultrabay 2000 Drive 3, 402R3485 22P6991 ThinkPad CD-WR/DVD Combo IV Ultrabay 2000 Drive 402R2032 22P9102 ThinkPad Ultralight 8x Max DVD-ROM Ultrabay 2000Drive 5External Storage Expansion Units 63, 43, 4Form Factor- 17331RU EXP400 Storage Expansion Unit Rack (3U)- 171010U FAStT EXP100 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 17226LU FAStT600 Entry Storage Server Rack (3U)- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)- 35421RU FAStT200 Storage Server 7Rack (3U)- 35422RU FAStT200 HA Storage Server Rack (3U)- 19K1121 FAStT200 Redundant RAID Controller -- 1724100 FAStT100 Storage Server Rack (3U)1. HDD bays in both the primary and secondary servers in 16-way configurations support boot disks.2. Removable media bays in the secondary server in 16-way configurations are disabled.3. Installed standard in bay three. Not compatible with bay four.4. Install in either bay three or four, requiring removal of standard devices. If only one optical drive is installed, it must be installed in bay four.If a second optical drive is installed, use bay three configured as slave.5. Installed standard in bay four.6. Not supported by the onboard external SCSI port, which supports external tape enclosures only. External SCSI HDD storage requires a RAIDcontroller. Fibre Channel HDD storage requires a Fibre Channel controller. For HDD expansion unit options, see the specific expansion unit section.For Fibre Channel storage devices, refer to the Fibre Channel Solutions Overview section.7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).Bay Form Factor Height Front Access Usage1, 2 HS SL Yes open3 133mm (5.25in) SL 14 133mm (5.25in) SL 2YesYesFDDDVD-ROM1. Supports FDD, high-density FDD, CD-ROM, CD-RW or DVD-ROM. If IDE device (optical drive) is installed,must be configured as slave.2. Supports CD-ROM, CD-RW or DVD-ROM. Must be configured as master if bay three contains an opticaldrive. If only one optical drive is installed, it must be installed in bay four. In 16-way configurations, baysthree and four are disabled in the secondary chassis.Chapter 20. xSeries 445 175


Bay 1Bay 3xSeries 445 front viewBay 4Bay 2176 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 445 I/O OptionsSBB NumberOptionNumberDescriptionAdapterLengthPCI Support 1SlotsSupported 1, 2Hot-Plug 2Storage Controllers 302R0996 02R0988 ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz 1 ... 6 -02R0225 32P0033 ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 1 ... 6 -24P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit/133MHz 1 ... 6 X24P2650 19K4646 PCI Wide Ultra160 SCSI Adapter 4Half 64-bit/66MHz 1 ... 6 -Fibre Storage Controllers and Options 524P2334 00N6881 FAStT Host Adapter Half 64-bit/66MHz 1 ... 6 X24P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 1 ... 6 X- 174290U FAStT900 Storage Server (US line cord) - - - -- 17421RU FAStT700 Storage Server - - - -- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 172260U FAStT600 Storage Server (US line cord,English pubs)- - - -- 1724100 FAStT100 Storage Server - - - -- 2034212 McDATA Sphereon 4300 Fabric Switch Model212- - - -- 2005H08 TotalStorage SAN Fabric Switch Model H08 - - - -- 2005H16 TotalStorage SAN Fabric Switch Model H16 - - - -- 3534F08 TotalStorage SAN Switch F08, 8-port - - - -- 2109F16 SAN Fibre Channel Switch, 16-Port - - - -Networking 625P2889 06P3601 710/100 Ethernet Server Adapter Half 32-bit/33MHz 1 ... 6 X32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit/133MHz 1 ... 6 X- 31P6301 7NetXtreme 1000 T Ethernet Adapter (copper) Half 64-bit/133MHz 1 ... 6 X32P9298 31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter Half 64-bit/133MHz 3 ... 6 8 X(copper) 7System Management 9- 13N0382 Remote Supervisor Adapter II-EXA for xSeries445 Servers 10, 11 Half 32-bit/33MHz reserved slot -- 03K9309 Advanced System Management InterconnectCable Kit 12 - - - -Other I/O 13- 8684-1RX 14, 15RXE-100 Remote Expansion Enclosure - - - -- 1519100 Integrated xSeries Adapter for iSeries 16 Full 64-bit/66MHz 2 16 -1. Adapters rated at a lower frequency than the slots in which they are installed will reduce the bus to the frequency of the slowest adapter.133MHz PCI-X adapters are backward compatible with 33/66MHz, 64-bit PCI-based servers. Slot six is not available if the serial port assemblycable shipped with the system is installed.2. All six slots are full-length hot-plug capable. For network operating system support, access www.pc.ibm.com/us/compat.3. xSeries 445 includes an integrated dual channel Ultra320 SCSI controller with one external and one internal connector. See Internal SCSI Cablingor Internal Cabling Overview for cabling alternatives. When a RAID controller is installed as a boot disk, it must be installed in a slot that isscanned before other RAID controllers in the configuration. Refer to the scan sequence provided in this section.4. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) is supported for external connections only.Chapter 20. xSeries 445 177


5. See Fibre Channel Solutions Overview section for additional configuration information.6. xSeries 445 has an integrated dual-port Broadcom-based 10/100/1000 PCI Ethernet controller (copper), which supports Wake on LAN.7. The Wake on LAN function of this option is supported by this server.8. When one of these adapters is installed, install in either slot 5 or 6. If two of these adapters are installed, install in slots 3 and 4.9. xSeries 445 includes a Remote Supervisor Adapter (RSA) installed in a dedicated PCI slot with an external connector, leaving six PCI slots availablefor optional adapters. Support for connection to other servers requires an optional Advanced System Management Interconnect Cable Kit(P/N 03K9309). Direct connection to the RXE drawer management controller in an RXE-100 Remote Expansion Enclosure is supported througha standard Interconnect Management Cable Kit with 3.5m cable. An 8m optional cable is available. 16-way configurations provide an Ethernetcrossover cable to connect the Ethernet ports in the RSAs in each chassis if they are not connected to an Ethernet LAN. All system managementfunctionality supported by the RSA is provided for both the primary and secondary servers through the Ethernet connection on the RSA. TheRS485 port is only required when the 16-way x445 configuration is interconnected to support additional systems with the x445 standard RSAserving as a focal point for those systems.10. This adapter is available as an upgrade to the Remote Supervisor Adapter that ships standard in xSeries 445. Installation must be done by anauthorized IBM service technician. This service is provided at no additional cost.11. Not supported in RXE-100 when connected to this system.12. Required to connect the standard Remote Supervisor Adapter to an interconnect network with other servers for system management supportthrough a single LAN or modem connection. Up to 24 Integrated System Management Processors or Remote Supervisors Adapters may be interconnectedwith an aggregate connection length of no more than 91.4m (300ft). This interconnect network of 24 devices may also include a maximumof 12 Advanced System Management Processors or Advanced System Management PCI Adapters. A customer-supplied Cat5 cable isrequired for each interconnection. System management RS485 interconnect network connections for 16-way configurations are not required unlessthe RSA in the 16-way x445 configuration is a focal point for additional systems.13. xSeries 445 provides three USB ports (two on the rear of the chassis and one on the front) and PS/2 connectors for monitor, keyboard andmouse. An external serial port can be enabled in the slot one bracket by installing the serial port assembly cable shipped with the system.14. RXE-100 Remote Expansion Enclosure supports up to 12 additional PCI-X slots. Cable required for connection included with expansion unit,which attaches to a standard integrated RIO port located on the back of the x445 chassis. An optional longer cable is available. Refer to RXE-100section for diagrams and supported options.15. xSeries 445 supports only one RXE-100 for all server configurations. Two- and four-way systems use only RIO port A because port B is inactiveunless a second SMP Expansion Module is installed. Sixteen-way systems require a connection from each server and an interconnection betweenthe servers.16. The Integrated xSeries Adapter for iSeries allows interconnectivity with an IBM eServer iSeries server. This card occupies two slot positions.It is restricted to slot two.B1 2 3 4 5 6RIO portsASlot 1: Bus A, 66MHz, 64-bit, full-length, 3.3v, Active PCI-XSlot 2: Bus A, 66MHz, 64-bit, full-length, 3.3v, Active PCI-XSlot 3: Bus B, 100MHz, 64-bit, full-length, 3.3v, Active PCI-XSlot 4: Bus B, 100MHz, 64-bit, full-length, 3.3v, Active PCI-XSlot 5: Bus C, 133MHz, 64-bit, full-length, 3.3v, Active PCI-XSlot 6: Bus D, 133MHz, 64-bit, full-length, 3.3v, Active PCI-XOptimal order of installation (highest frequency adapters first): 6-5-4-2-3-1Scan sequence ((both 8-way and16-way):Inside the primary server: slots 1, 2, 3, 4, 5, 6Additional chassis (if present):Standard 6-slot Expansion Kit in the RXE-100: slots 7, 8, 9, 10, 11, 12Inside the secondary server: slots 13, 14, 15, 16, 17, 18Second 6-slot Expansion Kit in the RXE-100: slots 19, 20, 21, 22, 23, 24Location of PCI slots and RIO ports on rear of x445 chassis178 Configuration and Options Guide


Refer to the Important Notices section for important noticesInterconnect management cableRXE-100ARXE Expansion PortsBRXE expansion cableBSMP expansion cable1 2 3 4 5 6SMPExpansionPortsRIO portsAprimary x445Scalability ports are numberedone to three from the left.RXE Management portssecondary x445B1 2 3 4 5 6SMPExpansionPortsRIO portsAxSeries 445 Power and AccessoriesOption NumberDescriptionPower 1, 2Uninterruptible Power Supply (UPS) 332P1020APC 2U Smart-UPS 1400RMB2130R30 UPS3000XLV 42130R31 UPS3000XHV 432P1692 UPS Extend Run Battery Pack 437L6861 APC Smart-UPS 5000RMB 5 Monitors 617231UX 1U Flat Panel Monitor Console Kit (with US Space Travel keyboard) 717231NX 1U Flat Panel Monitor Console Kit (without keyboard) 7633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 863324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black 832P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 932P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 9Chapter 20. xSeries 445 179


1. xSeries 445 models ship with two 1200w hot-swap power supplies with two 2.8m/9ft IEC 320-C13 to IEC 320-C14 power cables for intrarackpower distribution. Models shipped in the US also include two 2.8m/9ft IEC 320-C13 to NEMA 6-15P power cords for attachment to high voltagepower sources.2. Power supply redundancy is standard for all configurations with a high voltage power source. If a low voltage source is used, power suppliesoperate at 600w on 1200w models. This limits full redundancy to configurations with two processors. Low voltage is not supported for 16-wayinstallations.3. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.4. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.5. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.6. xSeries 445 uses an SVGA controller (ATI Rage XL) with 8MB of video memory. Optional video adapters are not supported. Sixteen-way configurationssupport console connections only through the primary chassis.7. Includes a 17in Flat Panel Monitor.8. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).9. Includes a 15in Flat Panel Monitor.SBB Number Option Number Description- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion OptionRack and NetBAY 1, 2Refer to the Rack Cabinets and Options section for information concerning IBM racks and rack-supporteddevices.- 73P5832 USB Conversion Option (four-pack) 4- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 2x8 Console Switch32P8917 28L3644 Space Saver II Keyboard 6, 7Console Connectivity 2, 3Keyboard and Mouse 502R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys, business black 802R3421 28L3673 Sleek 2-Button Mouse, business black1. xSeries 445 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options section.2. Sixteen-way configurations support console connections only through the primary chassis.3. Refer to the Rack Console Options section for information regarding console connectivity using these options.4. Required to connect one of the USB ports on the server to either a Local or Remote Console Manager. This option kit contains four 1.5 USBconversion option cables, four 14in lengths of Cat5 cable, four large curly-lock cable connectors and an eight-pack of velcro strips.5. xSeries 445 supports rack configurations only and ships without a keyboard or mouse. The system includes three USB ports (one on the frontof the chassis), SVGA video port, mouse port and keyboard port. USB ports are not active on the secondary server in 16-way configurations.6. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in ready-to-use position, or NetBAY2U Flat Panel MonitorConsole Kit. Standard with 2U NetBAY console kits.7. Advanced TrackPoint IV features are not available on IBM xSeries systems.8. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel display.180 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 445 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupported 1Storage Interface Form Factor Ext TapeEnclosures 171P9187 59P6745 80/160GB DLT VS160 SCSI TapeDrive- Ultra160 (16-bit) 133mm (5.25in) HH 0034B0X49P3225 00N8016 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B1X24P7303 59P6736 160/320GB SDLT Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B1X71P9165 59P6744 200/400GB LTO Full-High TapeDrive- Ultra2 (16-bit) 133mm (5.25in) FH 0034B0X3503B1XTape Autoloaders- 36232LX 200/400GB 2U LTO Generation 2Tape Autoloader 3623 Model 2LX- 360716X 3607 Series 1760G/3.5TB SDLTproTape Autoloader- 360726X 3607 Series 1.6TB/3.2TB LTO TapeAutoloader;- Ultra160 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- 18P9133 TotalStorage Ultrium LVD TapeDrive 3580 Model L23- Ultra160 (16-bit) Stand-alone or5U Rack 2-- 4560SLX SDLT/LTO Modular Tape Library - Ultra2 (16-bit) 5U Rack -External Tape Enclosures- 0034B0X NetBAY Tape Enclosure (RackMount) 3- Ultra2 (16-bit) 4U Rack -- 3503B1X Full-High SCSI Tape Enclosure 4- Ultra2 (16-bit) Desktop or3U Rack-- 3510020 External Half High SCSI StorageEnclosure 3, 5- LVD (16-bit) Desktop -- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160 (16-bit) 1U RackExternal Tape Libraries- 18P9212 TotalStorage Ultrium LVD Tape- Ultra160 (16-bit) Stand-alone orLibrary 3582 Model L23 3 4U Rack 6-- 18P9337 TotalStorage Ultrium Fibre TapeLibrary 3582 Model F23 3 - 2Gb Fibre Channel Stand-alone or4U Rack 6 -Associated Options- 00N7956 68-pin External MultimodeLVD/SE SCSI Terminator- LVD/SE (16-bit) External 3510020Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. xSeries 445 does not support internal tape drives. An external tape library or internal tape drive with a tape enclosure, can be connected to theUltra320 0.8mm VHDCI external SCSI connector. Select tape drive and enclosure, then use Appendix D: Cables - Storage Units - Controllers to selectan appropriate external cable.2. Rack mount requires an optional rack kit. See tape drive appendix for more information.3. External cables are not included.4. An external cable is included. Requires a fixed shelf if installed in a rack (allow an additional 1U in rack for fixed shelf).5. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).6. Rack mount kit is standard. Stand-alone kit is optional. See tape drive appendix for more information and options.Chapter 20. xSeries 445 181


182 Configuration and Options Guide


Chapter 21. xSeries 455xSeries 455 At-A-GlancePart Number1, 2, 3Processors/FSB Speed (GHz/MHz) 4Number of Processors (Std/Max) 5Cache 6Memory (Std/Max) 7Form FactorPower Supply Quantity (Std/Max) 8Hot-Swap (Power, Slots, HDD, Fans)Redundacy (Optional, Standard)System Management Adapter 9Onboard Ethernet 10Storage Controller 11Removable Media Bays (Total/Avail)Internal HDD Storage (Std/Max) 12Optical Drive (IDE) 13Bays (Total/Avail)Slots (Total/Avail) 148855-1RX 1.3/400 1/4 3MBL31GB/56GBRack(4U)2/2 P, S,H, FS-Fans,S-PowerY 1Gb DualU3202/1 0/293.6GB CD-RW/DVD4/3 6/68855-2RX 1.4/400 2/4 4MBL32GB/56GBRack(4U)2/2 P, S,H, FS-Fans,S-PowerY 1Gb DualU3202/1 0/293.6GB CD-RW/DVD4/3 6/68855-3RX 1.5/400 2/4 6MBL32GB56GBRack(4U)2/2 P, S,H, FS-Fans,S-PowerY 1Gb DualU3202/1 0/293.6GB CD-RW/DVD4/3 6/6Note: Refer to the Datacenter Solutions section for xSeries 455 DataCenter models.1. xSeries 455 also provides three USB ports (one in front and two in rear), one serial port (RS-232), and two RXE-100 expansion ports (RS-485) andone RXE-100 management port (RS-485). This system does not provide a floppy diskette drive.2. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See Rack Cabinets and Options section for supportedIBM racks.3. Availability in the U.S. is limited to the Large Enterprise Direct (LED) program or through EXAct Business Partner program members.4. 64-bit Itanium 2 processor with full-speed L3 cache, a 400MHz (double-pumped) Front-side Bus (FSB) and Explicitly Parallel Instruction Computing(EPIC) architecture.5. Multinode upgrade kits are available which provide 16-way scalability. Refer to x455 Processor section for more information.6. In addition to the L3 cache, these models also have 64MB of XceL4 Server Accelerator Cache that propels performance by reducing waits formain memory.7. Advanced Chipkill ECC memory options are two-way interleaved supporting Memory ProteXion, memory mirroring and hot-swap installationif mirroring is enabled.8. Two 1050w, voltage-sensing, hot-swap power supplies are standard, supporting N+1 redundancy on all 220v configurations and some 110vconfigurations. For this reason x455 servers should be connected to a 220v power source.9. Advanced system management is provided by a standard Remote Supervisor Adapter installed in a reserved slot.10. Broadcom dual-port 5704 10/100/1000 Ethernet controller supporting Wake-On-Lan.11. The LSI 1030 Ultra320 dual-channel integrated controller allows for two HDDs to be allocated for mirroring if a RAID adapter is not installed.Mirrored HDDs must be matched.12. Maximum internal storage is based on two 146.8GB Ultra320 hot-swap HDDs.13. ThinkPad Ultrabay 2000 16x/10x/24x/8x CD-RW/DVD drive is standard, installed in bay four.14. Support for an additional 12 64-bit slots available through installation of the optional RXE-100 Remote Expansion Unit. Refer to x455 I/O Optionsfor more information.xSeries 455 Processor OptionsSBBNumberOptionNumberProcessor Upgrades 1SMPSupport 273P6989 73P7076 1.3GHz/400MHz-3MB L3 Cache Itanium 2 Processor 1RX73P6990 73P7077 1.4GHz/400MHz-3MB L3 Cache Itanium 2 Processor 2RX73P6991 73P7078 1.5GHz/400MHz-3MB L3 Cache Itanium 2 Processor 3RXMulti-node Upgrade Kits 3- 73P9911 4-way to 8-way Scalability Option 4 -- 73P9715 8-way to 16-way Supplemental option 5 -183


1. xSeries 455 architecture optimizes memory and bus performance using an XA-64 core chipset supporting upto four 64-bit Itanium 2 processors in each model. x455 models include three SMP expansion ports, allowing upto four x455 systems to be interconnected creating up to a 16-way multi-node system. Note: All nodes in a multinodesystem must be installed in the same rack.2. All processors must be identical in type, speed and cache size. The nodes of a multi-node system must be thesame base model with identical processors.3. x455 models include three SMP expansion ports, allowing up to four x455 systems to be interconnected creatingup to a 16-way multi-node system. Note: All nodes in a multi-node system must be installed in the same rack.4. Allows two nodes to be connected together providing an 8-way capable configuration. Includes two 2.5m cables.5. Allows two 8-way nodes to be connected together providing a 16-way capable configuration. Includes one3.5m cable and three 2.5m cables. Note: 16-way capable configurations require both multi-node upgrade kits.xSeries 455 Processor board (front)xSeries 455 Processor board (back)xSeries 455 Memory OptionsSBBNumberOptionNumberMemory Description 1, 237L3538 33L5038 512MB PC2100 ECC DDR RDIMM33P3126 33L5039 1GB PC2100 ECC DDR RDIMM32P9223 33L5040 2GB PC2100 ECC DDR RDIMM1. x455 memory supports Chipkill, mirroring, hot-swap and memory ProteXion technologies.2. Installation of memory DIMMs in matched pairs is required. 56GB is supported via 28 DIMM sockets.Removal of standard memory is required to achieve the maximum supported amount.Note:• Performance is optimized by balancing the amount of memory between ports.184 Configuration and Options Guide


Refer to the Important Notices section for important notices• DIMM pairs must be matched between ports if memory mirroring is enabled.• Partial memory mirroring is not supported. If configured with “N” capacity of memory in Port 1, and“N+z” memory in Port 2 and memory mirroring is enabled, then “N” amount of memory is availableto the system, and “z” amount of memory is not usable.xSeries 455 memory cardPair #1st2nd3rd4th5th6th7thPair #8th9th10th11th12th13th14thLocationDIMM1 & DIMM14DIMM15 & DIMM28DIMM2 & DIMM13DIMM16 & DIMM27DIMM3 & DIMM12DIMM17 & DIMM26DIMM6 & DIMM8LocationDIMM18 & DIMM25DIMM5 & DIMM10DIMM19 & DIMM24DIMM6 & DIMM9DIMM20 & DIMM23DIMM7 & DIMM8DIMM21 & DIMM22xSeries 455 Internal CablingThe xSeries 455 server mechanical contains two hot-swap HDD bays and two 5.25in Ultrabay 2000 bays.The integrated SCSI controller is connected to the hot-swap backplane via a 16-bit LVDS cable. A 24inLVDS cable is also provided inside the mechanical (unconnected), for use when a ServeRAID controller isinstalled for internal HDD configurations.The standard optical drive is connected to the IDE controller via a two-drop IDE cable.External SCSI device attachment, such as a tape enclosure, is facilitated by a dedicated 0.8mm VHDCI porton the rear of the system chassis, which is connected to the second channel of the integrated SCSI controller.Chapter 21. xSeries 455 185


xSeries 455 Hard Disk Drive (HDD) Storage OptionsSBBNumberOptionNumberDescription Height BaysSupported 1MaximumQuantityHot-swap Ultra320 HDDs32P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 2Removable Media 1Bays Supported48P8072 05K9233 ThinkPad 24x-10x CD-ROM Ultrabay 2000 Drive 3, 402R3485 22P6991 ThinkPad CD-RW/DVD Combo IV Ultrabay 2000 Drive 3, 448P8073 22P9102 ThinkPad Ultralight 8x Max DVD-ROM Ultrabay 2000 Drive 3, 4External Storage Expansion Units 2Form Factor- 17331RU EXP400 Storage Expansion Unit Rack (3U)- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U)- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)- 172260U FAStT600 Storage Server Rack (3U)- 17421RU FAStT700 Storage Server Rack (4U)- 174290U FAStT900 Storage Server Rack (4U)1. If only one optical drive is installed, it must be installed in bay four. Standard optical is installed in bay four.2. Not supported by the onboard external SCSI port, which supports external tape enclosures only. External SCSI HDD storage requires a RAIDcontroller. Fibre Channel HDD storage requires a Fibre Channel controller. For HDD expansion unit options, see the specific expansion unit section.For Fibre Channel storage devices, refer to the Fibre Channel Solutions Quickview section.Bay Form Factor Height Front Access Usage1, 2 HS SL Yes HDD3 133mm (5.25in) SL Yes Optical4 133mm (5.25in) SL Yes Std. OpticalxSeries 455 front view186 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 455 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCI Support 1SlotsSupported 1Hot-PlugCapableStorage Controllers 202R0996 02R0988 ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz 1 ... 6 3X02R0225 32P0033 ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 1 ... 6 3 XFibre Storage Controllers andOptions 424P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 1 ... 6 X- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 172260U FAStT600 Storage Server (US line cord,English Pubs)- - - -- 17421RU FAStT700 Storage Server - - - -- 174290U FAStT900 Storage Server (US line cord) - - - -- 2005H08 TotalStorage SAN Fabric Switch Model H08 - - - -- 2005H16 TotalStorage SAN Fabric Switch Model H16 - - - -- 3534F08 TotalStorage SAN Switch F08, 8-port - - - -- 2109F16 SAN Fibre Channel Switch, 16-port - - - -Networking 525P2889 06P3601 10/100 Ethernet Server Adapter Half 32-bit/133MHz 1 ... 6 X31P9605 31P9601 PRO/1000 MT Server Adapter by Intel Half 64-bit/133MHz 1 ... 6 X32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit/133MHz 1 ... 6 X31P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) Half 64-bit/133MHz 1 ... 6 X32P9298 31P6401 NetXtreme 1000 T Dual Port EthernetAdapter (copper)Half 64-bit/133MHz 1 ... 6 XSystem Management 6- 03K9309 Advanced System Management InterconnectCable Kit 7- - - -Remote I/O Expansion- 8684-1RX RXE-100 Remote Expansion Enclosure 8- - - -1. Adapters rated at a lower frequency than the slots in which they are installed will reduce the bus to the frequency of the slowest adapter.2. xSeries 455 includes an integrated dual channel Ultra320 SCSI controller with one internal and one external connector.3. Internal HDD configurations require the ServeRAID adapters to be installed in slot 6 and connected to the backplane using a separate 24incable provided inside the mechanical.4. See Fibre Channel Solutions Overview section for additional configuration information.5. xSeries 455 includes an integrated Broadcom (BC5704) 10/100/1000 dual-port Ethernet controller (copper) with Wake on LAN support.6. xSeries 455 includes a Remote Supervisor Adapter II (RSA II) installed in a seventh reserved slot. Connection to other servers requires theAdvanced System Management Interconnect Cable Kit.7. Required to connect the standard Remote Supervisor Adapter II to an interconnect network with other servers for system managementsupport through a single LAN or modem connection.8. xSeries 455 supports a maximum of one RXE-100 per server. One RXE-100 can be shared between two x455 systems providing fail-oversupport or adding up to six additional PCI slots per server.Chapter 21. xSeries 455 187


PCI Slots 1- 6Reserved slot for standard RSASlot 1: Bus A, 66MHz, 64-bit, full-length, 3.3v, Active PCI-XSlot 2: Bus A, 66MHz, 64-bit, full-length, 3.3v, Active PCI-XSlot 3: Bus B, 100MHz, 64-bit, full-length, 3.3v, Active PCI-XSlot 4: Bus B, 100MHz, 64-bit, full-length, 3.3v, Active PCI-XSlot 5: Bus C, 133MHz, 64-bit, full-length, 3.3v, Active PCI-XSlot 6: Bus D, 133MHz, 64-bit, full-length, 3.3v, Active PCI-XPCI slot scan sequence: slot 1, 2, 6, 5, 3, 4Continuing in an RXE-100: slots 11, 12, 9, 10, 7, 8, 17, 18, 15, 16,xSeries 455 rear viewxSeries 455 Power and AccessoriesSBB Number Option Number DescriptionMonitors 1- 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 2- 63324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black 2- 32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 3- 32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 3- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console ManagerRack and NetBAY 4Refer to the Rack Cabinets and Options section for information concerning IBM racks and racksupporteddevices.Console Connectivity 5- 73P5832 USB Conversion Option (four-pack) 6 Keyboard and Mouse 713M7124 06P4069 USB Optical Wheel MouseNote: xSeries 455 systems include two 1050W, hot-swap power supplies with two 2.8m/9ft IEC 320-C13 to IEC 320-C14 powercables for intra-rack power distribution. Models shipped in the US also include two 2.8m/9ft IEC 320-C13 to NEMA 6-15P powercords for attachment to high voltage power sources. Power supply redundancy is standard for all configurations with a high voltagepower source.1. xSeries 455 provides an integrated ATI RageXL video controller with 8MB of video memory.188 Configuration and Options Guide


Refer to the Important Notices section for important notices2. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).3. Includes a 15in Flat Panel Monitor.4. xSeries 455 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options section.5. Refer to the Rack Condole Options section for information regarding console connectivity using these options.6. Required to connect one of the USB ports on the server to either a Local or Remote Console Manager. This option kit contains four 1.5m USBconversion option cables, four 14in lengths of Cat5 cable, four large curly-lock cable connectors and an eight-pack of Velcro strips.7. xSeries 455 supports rack configurations only and ships without a keyboard or mouse. Only USB-capable keyboards are supported.xSeries 455 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupported 1StorageInterfaceFormFactorExt TapeEnclosures 124P7303 59P6736 160/320GB SDLT Tape Drive - Ultra2 (16-bit) 133mm(5.25in) FH71P9165 59P6744 200/400GB LTO Full-High Tape Drive - Ultra2 (16-bit) 133mm(5.25in) FH0034B0X3503B1X0034B0X3503B1XTape Autoloaders- 36232LX 200/400GB 2U LTO Generation 2 TapeAutoloader 3623 Model 2LX- Ultra160 (16-bit) 2U Rack -External Tape Enclosures- 0034B0X NetBAY Tape Enclosure (Rack Mount) 2- Ultra2 (16-bit) 4U Rack -- 3503B1X Full-High SCSI Tape Enclosure 3- Ultra2 (16-bit) Desktop or3U Rack-- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160 (16-bit) 1U Rack -Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. xSeries 455 does not support internal tape drives. An external tape library or internal tape drive with a tape enclosure can be connected to theUltra320 0.8mm VHDCI external SCSI connector. Select tape drive and enclosure, then use Appendix D: Cables - Storage Units - Controllers toselect an appropriate external cable.2. External SCSI cables are not included.3. An external cable is included. Requires a fixed shelf if installed in a rack (allow an additional 1U in rack for fixed shelf).Chapter 21. xSeries 455 189


190 Configuration and Options Guide


Chapter 22. RXE-100 Remote Expansion EnclosureRXE-100 Remote Expansion Enclosure At-A-GlancePart NumberForm FactorPower Supply Quantity (Std/Max)Hot-Swap (Power, Slots, Fans)Redundancy (Optional, Standard)System Management Controller 1Number of Slots (Std/Max)8684-1RX Rack (3U) 2/2 P, S, F S - Fans, S - Power Y 6/12 28684-2RX 3Rack (3U) 2/2 P, S, F S- Fans, S - Power Y 6/12 2Note: Housed in a 19in rack-mountable drawer. Includes two 370w hotswappower supplies, two 2.8m rack power cables (100-240v, C13 to IEC320-C14) and two 2.8m low-voltage line cords (100-120v, C13 to NEMA 5-15P). One 3.5m Remote I/O Cable Kit and one 3.5m InterconnectManagement Cable Kit is also provided.1. RXE-100 management controller interfaces with the connected server’s RemoteSupervisor Adapter (I or II) using the standard management cables.2. RXE-100 ships with six full-length, Active-PCI, 64-bit PCI-X slots. Six moreare supported via installation of the optional six slot expansion kit.3. RXE-100 model 2RX offers better performance with an updated 2nd generationEnterprise X-Architecture chipset.powersupplypowersupplyRemote I/O PCI-X 6-slotExpansion KitSix-pack Bprimary RIOconnections (external)and DMC ports(RS-485 bus)fansRemote I/O PCI-X 6-slotExpansion KitSix-pack A (standard)secondary RIOconnections(front)RXE-100 Remote Expansion Enclosure P/N 8684-1RX top view• Rack-mounted 3U enclosure that fits standard IBM racks.• Contains six active PCI-X adapter slots with support for six optional slots (6-slot expansion kits are nothot-swap).• Supports three 133MHz or six 100MHz adapters (backward compatible to 33 or 66MHz adapters).• Interfaces directly to the host server memory controller.• Interfaces with Remote Supervisor Adapter in the host server (jumper cable provided with RemoteI/OPCI-X 6-slot Expansion Kit to connect second six-pack to the system management bus).• Hot-swap redundancy for fans and power supplies (two 370W power supplies and four cooling fans).(rear)191


RXE-100 Remote Expansion Enclosure I/O OptionsNote: Supported I/O options for RXE-100 will match those options supported on the system to which RXE-100 is connected. See specific system options for further option support. Exceptions will be footnoted.OptionNumberDescriptionAssociated Options31P5998 Remote I/O PCI-X 6-slot Expansion Kit 1, 213N0055 Remote I/O PCI-X 6-slot Expansion Kit 2, 331P6088 8m Interconnect Management Cable Kit 431P6103 8m Remote I/O Cable Kit 531P6087 3.5m Interconnect Management Cable Kit 631P6102 3.5m Remote I/O Cable Kit 61. Supported in 8684 model 1RX only.2. Installs into the RXE-100 to expand slot availability from six to12. The expansion enclosure must be powered down to install thisoption. Cables internally through the secondary RIO connectors.The additional six slots are numbered one to six with the same attributesas the standard unit.3. Supported in 8684 model 2RX only.4. Allows the host server remote management functionality tosupport the RXE-100. A 3.5m cable is standard for installations inthe same rack. The 8m length is required when installing in a differentrack.5. Primary expansion cable connecting the expansion enclosurePCI slot capability to the system processor and memory components.A 3.5m cable is standard for installations in the same rack.The 8m length is required when installing in a different rack. Connectsthe RIO port on the back of the system to the primary RIOport on the back of the enclosure.6. Ships standard with the RXE-100 Remote Expansion Enclosure.PCI slots 1 & 2: Bus 3PCI slots 3 & 4: Bus 2PCI slots 5 & 6: Bus 1RXE-100 ships with six full-length, Active-PCI, 64-bit, 133MHz, PCI-X slots. An additional six slots aresupported via installation of the optional six slot expansion kit. Each bus will support one PCI adapteroperating at 133MHz or two PCI adapters operating at 100MHz or slower.192 Configuration and Options Guide


Chapter 23. Datacenter Solution ProgramSoftwareThe IBM Datacenter Solution Program is a comprehensive set of hardware, software and service offeringsintended to deliver true enterprise computing solutions based on the Microsoft® Windows® 2000Datacenter Server and Microsoft® Windows® Server 2003 Datacenter Edition operating systems. xSeriesservers supporting Datacenter Solutions include the xSeries 445 and the xSeries 455.IBM now offers two Datacenter solutions with the xSeries 445 and 455. The Datacenter Scalable Offering for“system” certified solutions and the Datacenter High Availability Program for end to end Datacentercertified configurations including storage. The IBM Datacenter Solutions include Microsoft-certifiedhardware, the Windows Datacenter Server operating systems and optional onsite services and remotesupport offerings through IGS or xSeries Lab Services.In addition to the configuration information on the following pages, the IBM Datacenter Solution Programincludes the following software and optional services. The service offerings must be ordered separately. Acomplete Solutions Assurance Review will be conducted by IBM or your IBM business partner to ensurethat the configuration being ordered is complete.• Microsoft Windows 2000 Datacenter Server, licensed for up to 16 CPUs 1 (five Client Access Licensesare included. Additional CALs must be purchased separately)• Microsoft Windows Server 2003 Datacenter Edition, licensed for up to 16 CPUs 1 (five Client AccessLicenses are included. Additional CALs must be purchased separately)Standard Services• Solutions Assurance Review 2• Factory installation and software preload for the IBM Datacenter High Availability Program• Limited Warranty 3 service with 24x7 same day responseIBM Optional Support Services• On-site installation• Microsoft Authorized Premier Support (MAPS--base software support for Datacenter, whereavailable)• IBM Software Update Subscription for Microsoft Windows Datacenter 4• Advanced Support for Mission Critical Systems (US)• Support Line (base software support outside the US and where MAPS is not available)• High Availability Services 5 (including up to 99.99% availability guarantee in the US for the DatacenterHigh Availability Program only)• xSeries 99.9% High Availability Guarantee 6 outside the US• Warranty upgrade (24x7x2 hour response)• Operational Support Services, e.g., Account advocate1. IBM makes no representations or warranties regarding non-IBM products or services. These products are offered andwarranted by third parties.2. IBM provides this service standard for all Datacenter sales direct through IBM. Business Partners will also perform thisservice but may choose to charge a fee.3. For information on IBM's Statement of Limited Warranty, call 1-800-772-2227 or contact your IBM representative orreseller. Copies are available upon request. International Warranty Service available in those countries where the particularproduct is sold by IBM or IBM Business Partners. With respect to on-site service, IBM sends a technician after attempting toresolve the problem remotely.4. This annual Software Update Subscription service ensures that customers can upgrade to future Microsoft Datacenteroperating system releases. Software Update Subscriptions for the IBM Datacenter High Availability Program includeoperating system upgrades and IBM maintenance updates. The IBM Datacenter Scalable Offering includes SoftwareUpdate Subscriptions for operating system upgrades only, maintenance is available from Microsoft. IBM will provideOperating System Upgrades and Maintenance as applicable as long as upgrade and maintenance support is provided byMicrosoft.5. The High Availability Services for Business Critical Systems offering for an availability guarantee is an optional serviceand is only offered for eligible IBM eServer xSeries environments at this time. IBM reserves the right to change the termsand conditions of the program at any time, without notice. For more details, refer to IBM’s eServer xSeries ‘99.9%Availability Guarantee Program’ website. See ‘Information Sources’ for URL.6. The xSeries 99.9% High Availability Guarantee program is an optional offering on eligible xSeries configurations. IBMreserves the right to change the terms and conditions of the program at any time, without notice. For more details, refer towww.pc.ibm.com/ww/eserver/xseries/999guarantee.html.193


Datacenter Solutions• Testing Services--proof of concept, assessment, design and planning• Business Continuity and Recovery Services• Custom services for unique requirements provided by IGSNote: Maximum memory may require replacement of standard memory with optional maximum memorymodule.The product content described here is consistent worldwide; however, there may be some variance in IBMpart numbers outside of the US and Canada. Contact your IBM Business Partner or IBM MarketingRepresentative for assistance with your specific configuration requirements.Second node Ethernet adapterInterconnect link(crossover cable included)FC2-133 Host Bus Adapter2 x Hot-swap HDDs 1 PRO/1000 MT Ethernet2Short-wave 1m LC-LCFibre Channel CableQuantity = 2 x (# EXP700 - 1)FC2-133 Host Bus AdapterFCSwitchMirroredServeRAID-6MFCSwitchServer Nodes 1 and 2Short-wave 5mLC-LC cableQuantity = 2 x # nodes1. Not included in the bundled solutions.2. PCI adapters are not included in the single-node bundle.Node 2Short-wave SFP Modulesfor EXP700sQuantity = (4 x # EXP700s) - 25m LC-LC Fibre Channel CableQuantity = 2Four standardmini hubsShort-wave SFP Modulesfor storage serverQuantity = (2 x # nodes) + 2FAStT EXP700FAStT900 Storage Server194 Configuration and Options Guide


Refer to the Important Notices section for important noticesEnterpriseRackConsoleSwitchFAStT Storage ServerHigh-voltagePDUs2U Flat Panel MonitorConsoleKitTape Drive EnclosureFAStT EXP Storage ExpansionKitsxSeries Datacenter certifiedserversxSeries 445 Datacenter Solution: High Availability ProgramThe Datacenter High Availability Program includes the part numbers and quantities identified in this table.Additional options for Datacenter Solutions are listed in the table labeled “Selectable Options.”Chapter 23. Datacenter Solution Program 195


xSeries 445 4 and 8-way Datacenter High Availability Program 1OptionNumberDescriptionTotal QTY4-wayTotal Qty8-wayUsageSelect one of the following8870-1BX8870-2BX8870-4BX2 x 2.2GHz/400MHz-2MB Xeon MP, open bay, DVD-ROM2 x 2.7GHz/400MHz-2MB Xeon MP, open bay, DVD-ROM2 x 3.0GHz/400MHz-4MB Xeon MP, open bay, DVD-ROM1 11 11 1Select one of the followingAll processors in the solution mustmatch.13N0723 2.2GHz/400MHz-2MB L3 Cache Xeon Processor MP 2 613N0722 2.7GHz/400MHz-2MB L3 Cache Xeon Processor MP 2 613N0721 3.0GHz/400MHz-4MB L3 Cache Xeon Processor MP 2 64-way to 8-way upgrade kit02R1870 SMP Expansion Module 0 1Select memory required Select in matched pairs. Up to 16DIMMs per chassis without SMPExpansion module. Up to 32 with SMPExpansion module33L5038 512MB PC2100 ECC DDR RDIMM Min. of 2 -33L5039 1GB PC2100 ECC DDR RDIMM Min. of 2 -33L5040 2GB PC2100 ECC DDR RDIMM Min. of 2 -Select one of the following02R0988 ServeRAID-6M Controller (256MB Cache) 1 132P0033 ServeRAID-6M Controller (128MB Cache) 1 1Select HDD requiredTwo HDDs required32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 232P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 232P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 232P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 232P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 2Select the following24P0960 FC2-133 Host Bus Adapter 2 2 Two per node for load balancing andredundancy.Select one of the following4816-6BUPreload Kit for Microsoft Windows 2000 Datacenter,1-8 Processors1 14816-7AU Preload Kit for Microsoft Windows Server 2003Datacenter Edition, 1-4 Processors14816-7BU Preload Kit for Microsoft Windows Server 2003Datacenter Edition, 1-8 Processors1Services06P7505 Image Load Fee 1 158P8663 Hardware Integration - Server - up to 3 options As Required As Required58P8665 Hardware Integration - Server - 4 or more options As Required As Required1. All final customer configurations and solutions require IBM Solution Assurance Approval.196 Configuration and Options Guide


Refer to the Important Notices section for important noticesThe Datacenter High Availability Program includes the part numbers and quantities identified in this table.Additional options for Datacenter Solutions are listed in the table labeled “Selectable Options.”xSeries 445 16-way Datacenter High Availability Program 1OptionNumberDescriptionTotal Qty16-wayTotal Qty2 Node16-wayTotal Qty4 Node16-wayUsageSelect one of the following8870-1Bx8870-2BX8870-4BX2 x 2.2GHz/400MHz-2MB Xeon MP, open-bay,DVD-ROM2 x 2.7GHz/400MHz-2MB Xeon MP, open-bay,DVD-ROM2 x 3.0GHz/400MHz-4MB Xeon MP, open-bay,DVD-ROMScalability Kit2 4 8 -2 4 8 -2 4 8 -02R2013 Two Chassis 16-way Configuration Kit 1 2 4 Allows two chassis to be connectedtogether providing a 16-way capableconfiguration.13N072313N072213N0721Select one of the following2.2GHz/400MHz-2MB L3 Cache Xeon ProcessorMP2.7GHz/400MHz-2MB L3 Cache Xeon ProcessorMP3.0GHz/400MHz-2MB L3 Cache Xeon ProcessorMP4-way to 8-way upgrade kitAll processors in the solution mustmatch.12 24 48 -12 24 48 -12 24 48 -02R1870 SMP Expansion Module 2 4 8 -Select memory required Select in matched pairs. Up to 16DIMMs per chassis without SMPExpansion module; Up to 32 withSMP Expansion module.33L5038 512MB PC2100 ECC DDR RDIMM Min. of 2 - - -33L5039 1GB PC2100 ECC DDR RDIMM Min. of 2 - - -33L5040 2GB PC2100 ECC DDR RDIMM Min. of 2 - - -Select one of the following02R0988 ServeRAID-6M Controller (256MB Cache) 1 2 4 -32P0033 ServeRAID-6M Controller (128MB Cache) 1 2 4 -Select HDD required Two HDDs per node required. 232P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 8 -32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 8 -32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 8 -32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4 8 -32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4 8 -Chapter 23. Datacenter Solution Program 197


Select the followingOne per node24P0960 FC2-133 Host Bus Adapter 2 4 8 Two per node for load balancing andredundancy.Select one of the following4816-6DU Preload Kit for Microsoft Windows 2000Datacenter, 1-16 Processors4816-7DU Preload Kit for Microsoft Windows Server 2003Datacenter Edition, 1-16 ProcessorsOne per node1 2 4 -1 2 4 -Services06P7505 Image Load Fee 1 2 4 -58P8663 Hardware Integration - Server - up to 3 options AsRequiredAsRequiredAsRequired-58P8665 Hardware Integration - Server - 4 or more options AsRequiredAsRequiredAsRequired-Note: A node represents a single instance of the operating system. For x445 Datacenter 16-way configurations, a node consists of twochassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. One of the two chassis in each “node” will contain two HDDs.xSeries 445 Datacenter High Availability Program - Selectable Options 1Selectable Options 2WarrantyServiceUpgrade24x7x4 hrsWarrantyServiceUpgrade24x7x2 hrsEnterpriseRackAssemblyFeeOptionNumberDescription Usage OptionNumberOptionNumberOptionNumberI/O Controllers22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter One per node. - - --31P6301 NetXtreme 1000 T Ethernet Adapter (copper) One per node. - - -31P6401174290U 4174290X 4NetXtreme 1000 T Dual Port Ethernet Adapter(copper)External Fibre Channel Storage 3FAStT900 Fibre Channel Storage Server (U.S. linecord)FAStT900 Fibre Channel Storage Server (no linecord)One per node. - - -- 96P2062 96P2063 21P3342- 96P2062 96P2063 21P3342417401RU FAStT EXP700 Storage Expansion Unit - 41L2768 41L2769 21P334224P7984 Upgrade from 16 to 64 Storage Partitions - - - -24P7985 FAStT900 FlashCopy Activation - - - -24P7986 FAStT900 Remote Mirror Activation - - - -Fibre Channel HDD OptionsMultiple of two per bundle06P5761 36.4GB 10K rpm 2Gbps FC Hot-swap HDD - - - -06P5762 73.4GB 10K rpm 2Gbps FC Hot-swap HDD - - - -06P5771 18.2GB 15K rpm 2Gbps FC Hot-swap HDD - - - -06P5772 36.4GB 15K rpm 2Gbps FC Hot-swap HDD - - - -Cables, connectors and switches:19K1247 1m LC-LC Fibre Channel Cable - - - -19K1248 5m LC-LC Fibre Channel Cable - - - -198 Configuration and Options Guide


Refer to the Important Notices section for important notices19K1249 25m LC-LC Fibre Channel Cable - - - -19K1271 Short-wave SFP Module - - - -42109F16 SAN Fibre Channel Switch, 16-port - 96P2033 96P2034 21P334218P3576 Additional Power Supply for 2109F16 - - - -43534F08 TotalStorage SAN Switch F08 - 8-port - 96P1994 96P1995 -Other I/O48684-1RX RXE-100 Remote Expansion Enclosure - 96P2469 96P2470 -31P5998 Remote I/O PCI-X 6-slot Expansion Kit - - - -519K5788 25ft Ethernet Crossover Cable - - - -31L3820 Fast Ethernet on STP Adapter 2.5m Cable Attachment from Ethernetadapter to Ethernet switch- - -Tape Drives and Enclosures 600N8016 100/200GB LTO Full-High Tape Drive - - - -59P6744 200/400GB LTO Full-High Tape Drive - - - -0034B0X NetBAY Tape Enclosure (4U Rack Mount) 4U rack mount enclosure thatsupports four full-high or sixhalf-high tape drives3503B1X Full-High SCSI Tape Enclosure7 Desktop or 3U rack mount thatsupports a single full-high tapedrive- - -- - -Rack-related:930842S NetBAY42 Enterprise Rack Cabinet (ER) - 41L2762 41L2763 21P3341930842E NetBAY42 Enterprise Expansion Rack Cabinet (EX) - 41L2762 41L2763 21P334132P1702 432P1703 4NetBAY 2U Flat Panel Monitor Console Kit (withkeyboard)NetBAY 2U Flat Panel Monitor Console Kit (withoutkeyboard)- - - -- - - -94G6670 Blank Filler Panel Kit Fills empty front panel space tocontrol air flow- - -409N4290 NetBAY 1x4 Console Switch - - - -409N4291 NetBAY 2 x 8 Console Switch - - - -94G7447 NetBAY Console Cable Set 12ft (3.66m) - - - -94G7448 Power Cable Type C12 (3.7m, 12ft) Provides IEC 320-C13 (device)to IEC 320-C14 (Power Unit)power cord.- - -37L68864 NetBAY Three-phase Front-end 30a PDU (US) - - - -94G66664 100-120v Power Distribution Unit - - - -2130R314 UPS3000XHV (US) - - - -431P1692 UPS Extend Run Battery Pack - - - -06P3882 4, 5Cisco CAT2912 12-port Ethernet Switch/EnterpriseEditionDatacenter Preload KitsUsed for heartbeat interconnect. - - 21P3342One per node or as requiredseparately.4816-6BU Microsoft Windows 2000 Datacenter, 1-8 processors - - - -4816-6DU Microsoft Windows 2000 Datacenter, 1-16 processors - - - -4816-7AU4816-7BU4816-7DUMicrosoft Windows Server 2003 Datacenter Edition,1-4 processorsMicrosoft Windows Server 2003 Datacenter Edition,1-8 processorsMicrosoft Windows Server 2003 Datacenter Edition,1-16 processors- - - -- - - -- - - -Chapter 23. Datacenter Solution Program 199


4816-ABX4816-ADX4816-CAX4816-CBX4816-CDXSoftware Update Subscriptions 8Software Update Subscription for MicrosoftWindows 2000 Datacenter, 1-8 processorsSoftware Update Subscription for MicrosoftWindows 2000 Datacenter, 1-16 processorsSoftware Update Subscription for MicrosoftWindows Server 2003 Datacenter Edition, 1-4processorsSoftware Update Subscription for MicrosoftWindows Server 2003 Datacenter Edition, 1-8processorsSoftware Update Subscription for MicrosoftWindows Server 2003 Datacenter Edition, 1-16processorsServices- - - -- - - -- - - -- - - -- - - -58P8663 Hardware Integration - Server - up to 3 options - - - -58P8665 Hardware Integration - Server - 4 or more options - - - -06P7514 Enterprise Rack Setup Fee Covers installation of items suchas PDUs, KVM and powercabling. Quantity equals thenumber of racks.31P4310 Enterprise Rack Configuration Fee (1U) Quantity equals the number ofrack components 1U or smaller.- - -- - -06P7515 Enterprise Rack Configuration Fee (>1U) Quantity equals the number ofrack components larger than1U.Warranty Services96P2688 3 Year On-Site Repair: 24 x 7 x 4 - - - -96P2689 3 Year On-Site Repair: 24 x 7 x 2 9 - - - -Note: A node represents a single instance of the operating system. For x445 Datacenter 16-way configurations, a node consists oftwo chassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. Selectable options are additional, certified options for use with IBM Datacenter solutions.3. Refer to the Fiber Channel Solutions section for more information of FAStT storage devices.4. This hardware component may be subject to a rack installation/configuration fee.5. Part number may vary outside of North America.6. xSeries 445 does not support internal tape drives. An external tape enclosure must be used.7. Requires a fixed shelf such as 1U Fixed Shelf P/N 94G7442.8. Annual subscription services ensure that customers receive all updates to the Microsoft Datacenter operating system (and roll up of IBMdriver updates). Staying current on Datacenter subscriptions is a requirement for Microsoft support; therefore, this service is highly recommendedto all Datacenter customers.9. 24x7x2 warranty service is limited to selected locations. For list, see Fax #8146 on 1-800-IBM-4FAXxSeries 455 Datacenter Solution: High Availability ProgramThe Datacenter High Availability Program includes the part numbers and quantities identified in this table.Additional options for Datacenter Solutions are listed in the table labeled “Selectable Options.”200 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 455 4-way Datacenter High Availability Program 1OptionNumberDescription Total Qty Usage8855-1AX8855-2AX8855-3AXSelect one of the following2 x 1.3GHz/400MHz-3MB L3 Cache Itanium 2, openbay,CD-RW/DVD2 x 1.4GHz/400MHz-4MB L3 Cache Itanium 2, openbay,CD-RW/DVD2 x 1.5GHz/400MHz-6MB L3 Cache Itanium 2, openbay,CD-RW/DVD111Select one of the followingAll processors in the solution must match.73P7076 1.3GHz/400MHz-3MB L3 Cache Itanium 2 Processor 273P7077 1.4GHz/400MHz-4MB L3 Cache Itanium 2 Processor 273P7078 1.5GHz/400MHz-6MB L3 Cache Itanium 2 Processor 2Select memory requiredSelect in matched pairs, up to 28 DIMMs perchassis.33L5038 512MB PC2100 ECC DDR RDIMM Min. of 233L5039 1GB PC2100 ECC DDR RDIMM Min. of 233L5040 2GB PC2100 ECC DDR RDIMM Min. of 2Select one of the following02R0988 ServeRAID-6M Controller (256MB Cache) 132P0033 ServeRAID-6M Controller (128MB Cache) 1Select HDD requiredTwo HDDs required32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 232P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 232P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD 232P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 232P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2Select the following24P0960 FC2-133 Host Bus Adapter 2 Two per node for load balancing andredundancy.Each Datacenter Solution is preloadedwith the following:4816-5AUMicrosoft Windows Server 2003 Datacenter Editionlicensed for up to 4 processorsServices106P7505 Image Load Fee 158P8663 Hardware Integration - Server (up to 3 options) AsRequired58P8665 Hardware Integration - Server (4 or more options) AsRequired1. All final customer configurations and solutions require IBM Solution Assurance Approval.The Datacenter High Availability Program includes the part numbers and quantities identified in this table.Additional options for Datacenter Solutions are listed in the table labeled “Selectable Options.”Chapter 23. Datacenter Solution Program 201


xSeries 455 8-way Datacenter High Availability Program 1OptionNumberDescriptionTotal Qty8-wayTotal Qty2-Node 8-wayUsageSelect one of the following8855-1AX8855-2AX8855-3AX2 x 1.3GHz/400MHz-3MB L3 Cache Itanium 2, openbay,CD-RW/DVD2 x 1.4GHz/400MHz-4MB L3 Cache Itanium 2, openbay,CD-RW/DVD2 x 1.5GHz/400MHz-6MB L3 Cache Itanium 2, openbay,CD-RW/DVDScalability Kit2 42 42 473P9911 4-way to 8-way Scalability option 1 2 Allows two nodes to be connectedtogether providing an 8-way capableconfiguration. Includes two 2.5mmcables.Select one of the followingAll processors in the solution mustmatch.73P7076 1.3GHz/400MHz-3MB L3 Cache Itanium 2 Processor 4 873P7077 1.4GHz/400MHz-4MB L3 Cache Itanium 2 Processor 4 873P7078 1.5GHz/400MHz-6MB L3 Cache Itanium 2 Processor 4 8Select memory requiredSelect in matched pairs, up to 28 DIMMsper chassis.33L5038 512MB PC2100 ECC DDR RDIMM Min. of 2 -33L5039 1GB PC2100 ECC DDR RDIMM Min. of 2 -33L5040 2GB PC2100 ECC DDR RDIMM Min. of 2 -Select one of the following02R0988 ServeRAID-6M Controller (256MB Cache) 1 232P0033 ServeRAID-6M Controller (128MB Cache) 1 2Select HDD required Two HDDs per node required 232P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 432P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 432P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 432P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 432P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4Select the following24P0960 FC2-133 Host Bus Adapter 2 4 Two per node for load balancing andredundancy.Services06P7505 Image Load Fee 1 258P8663 Hardware Integration - Server (up to 3 options) AsRequired58P8665 Hardware Integration - Server (4 or more options) AsRequiredAs RequiredAs RequiredNote: A node represents a single instance of the operating system. For x455 Datacenter 8-way configurations, a node consists of twochassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. One of the two chassis in each “node” will contain two HDDs.The Datacenter High Availability Program includes the part numbers and quantities identified in this table.Additional options for Datacenter Solutions are listed in the table labeled “Selectable Options.”202 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 455 16-way Datacenter High Availability Program 1OptionNumberDescriptionTotal Qty16-wayTotal Qty2 Node16-wayTotal Qty4 Node16-wayUsageSelect one of the following8855-1AX 2 x 1.3GHz/400MHz-3MB L3 Cache Itanium 2,open-bay, CD-RW/DVD8855-2AX 2 x 1.4GHz/400MHz-4MB L3 Cache Itanium 2,open-bay, CD-RW/DVD8855-3AX 2 x 1.5GHz/400MHz-6MB L3 Cache Itanium 2,open-bay, CD-RW/DVD4 8 164 8 164 8 16Scalability Kit73P9911 4-way to 8-way Scalability Option 1 2 4 Allows two chassis to be connectedtogether providing an 8-way capableconfiguration. Includes two 2.5mmcables.73P9715 8-way to 16-way Supplemental Option 1 2 4 Allows two 8-way nodes to beconnected together providing a 16-waycapable configuration. Includes one3.5m cable and three 2.5m cables.Select one of the followingAll processors in the solution mustmatch.73P7076 1.3GHz/400MHz-3MB L3 Cache Itanium 2Processor73P7077 1.4GHz/400MHz-4MB L3 Cache Itanium 2Processor73P7078 1.5GHz/400MHz-6MB L3 Cache Itanium 2Processor8 16 328 16 328 16 32Select memory requiredSelect in matched pairs up to 28 DIMMsper chassis.33L5038 512MB PC2100 ECC DDR RDIMM Min. of 2 - -33L5039 1GB PC2100 ECC DDR RDIMM Min. of 2 - -33L5040 2GB PC2100 ECC DDR RDIMM Min. of 2 - -Select one of the following02R0988 ServeRAID-6M Controller (256MB Cache) 1 2 432P0033 ServeRAID-6M Controller (128MB Cache) 1 2 4Select HDD required Two HDDs per node required 232P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 832P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 832P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 832P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4 8Chapter 23. Datacenter Solution Program 203


32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4 8Select the following24P0960 FC2-133 Host Bus Adapter 2 4 8 Two per node for load balancing andredundancy.Each Datacenter Solution is preloadedwith the following:4816-5DUMicrosoft Windows Server 2003 DatacenterEdition licensed for up to 16 processorsServices1 2 4 One per node.06P7505 Image Load Fee 1 2 458P8663 Hardware Integration - Server (up to 3 options) AsRequiredAsRequiredAsRequired58P8665Hardware Integration - Server (4 or moreoptions)AsRequiredAsRequiredAsRequiredNote: A node represents a single instance of the operating system. For x455 Datacenter 16-way configurations, a node consists of fourchassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. One of the four chassis in each “node” will contain two HDDs.xSeries 455 Datacenter High Availability Program - Selectable Options 1Selectable Options 2WarrantyServiceUpgrade24x7x4 hrsWarrantyServiceUpgrade24x7x2 hrsEnterpriseRackAssemblyFeeOptionNumberDescription Usage OptionNumberOptionNumberOptionNumberI/O Controllers22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter One per node.31P6301 NetXtreme 1000 T Ethernet Adapter (copper) One per node.31P6401NetXtreme 1000 T Dual Port Ethernet Adapter(copper)One per node.31P9601 PRO/1000 MT Server Adapter by Intel One per node.External Fibre Channel Storage174290U 3174290X 3FAStT900 Fibre Channel Storage Server (U.S. linecord)FAStT900 Fibre Channel Storage Server (no linecord)96P2062 96P2063 21P334296P2062 96P2063 21P3342317401RU FAStT EXP700 Storage Expansion Unit 41L2768 41L2769 21P334224P798424P798524P7986Upgrade from 16 to 64 Storage PartitionsFAStT900 FlashCopy ActivationFAStT900 Remote Mirror ActivationFibre Channel HDD OptionsMultiple of two per bundle06P576106P576206P577106P577236.4GB 10K rpm 2Gbps FC Hot-swap HDD73.4GB 10K rpm 2Gbps FC Hot-swap HDD18.2GB 15K rpm 2Gbps FC Hot-swap HDD36.4GB 15K rpm 2Gbps FC Hot-swap HDDCables, connectors and switches:19K12471m LC-LC Fibre Channel Cable204 Configuration and Options Guide


Refer to the Important Notices section for important notices19K124819K124919K12715m LC-LC Fibre Channel Cable25m LC-LC Fibre Channel CableShort-wave SFP Module32109F16 SAN Fibre Channel Switch, 16-port 96P2033 96P2034 21P334218P3576Additional Power Supply for 2109F1633534F08 TotalStorage SAN Switch F08 - 8-port 96P1994 96P1995Other I/O38684-1RX RXE-100 Remote Expansion Enclosure 96P2469 96P247031P5998Remote I/O PCI-X 6-slot Expansion Kit419K5788 25ft Ethernet Crossover Cable -31L3820 Fast Ethernet on STP Adapter 2.5m Cable Attachment from Ethernetadapter to Ethernet switchRack-related:930842S NetBAY42 Enterprise Rack Cabinet (ER) 41L2762 41L2763 21P3341930842E NetBAY42 Enterprise Expansion Rack Cabinet (EX) 41L2762 41L2763 21P334132P1702 332P1703 3NetBAY 2U Flat Panel Monitor Console Kit (withkeyboard)NetBAY 2U Flat Panel Monitor Console Kit (withoutkeyboard)94G6670 Blank Filler Kit Fills empty front panel space tocontrol air flow309N4290 NetBAY 1x4 Console Switch Attaches up to 4 nodes to asingle monitor, keyboard andmouse.309N4291 NetBAY 2 x 8 Console Switch -94G7447 NetBAY Console Cable Set 12ft (3.66m) -94G7448 Power Cable Type C12 (3.7m, 12ft) Provides IEC 320-C13 (device)to IEC 320-C14 (Power Unit)power cord.37L6886 3NetBAY Three-phase Front-end 30a PDU (US)94G6666 3100-120v Power Distribution Unit2130R31 3UPS3000XHV (US)31P1692 3UPS Extend Run Battery Pack06P3882 3, 4Cisco CAT2912 12-port Ethernet Switch/EnterpriseEditionUsed for heartbeat interconnect.21P3342Datacenter Preload KitsOne per node or as requiredseparately4816-5AUMicrosoft Windows Server 2003 Datacenter Edition,1-4 processors4816-5BUMicrosoft Windows Server 2003 Datacenter Edition,1-8 processors4816-5DUMicrosoft Windows Server 2003 Datacenter Edition,1-16 processorsSoftware Update Subscriptions 54816-EAXSoftware Update Subscription for MicrosoftWindows Server 2003 Datacenter Edition, 1-4processors (Yearly)4816-EBXSoftware Update Subscription for MicrosoftWindows Server 2003 Datacenter Edition, 1-8processors (Yearly)4816-EDXSoftware Update Subscription for MicrosoftWindows Server 2003 Datacenter Edition, 1-16processors (Yearly)Chapter 23. Datacenter Solution Program 205


Services58P866358P8665Hardware Integration - Server - up to 3 optionsHardware Integration - Server - 4 or more options06P7514 Enterprise Rack Setup Fee Covers installation of items suchas PDUs, KVM and powercabling. Quantity equals thenumber of racks.31P4310 Enterprise Rack Configuration Fee (1U) Quantity equals the number ofrack components 1U or smaller.06P7515 Enterprise Rack Configuration Fee (>1U) Quantity equals the number ofrack components larger than1U.Warranty Services96P2688 3 Year On-Site Repair: 24 x 7 x 496P2689 3 Year On-Site Repair: 24 x 7 x 2 6Note: A node represents a single instance of the operating system. For x455 Datacenter 8-way configurations, a node consists oftwo chassis; for 16-way configurations, a node consists of four chassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. Selectable options are additional, certified options for use with IBM Datacenter solutions.3. Indicates component may be subject to Rack Install Fee.4. Part number may vary outside of North America.5. This annual subscription service ensures that customers receive all updates to the Microsoft Datacenter operating system (and roll up ofIBM driver updates). Staying current on Datacenter patches is a requirement for Microsoft support; therefore, this service is highly recommendedto all Datacenter customers.6. 24x7x2 warranty service is limited to selected locations. For list, see Fax #8146 on 1-800-IBM-4FAXxSeries 445 Datacenter Solution: Scalable OfferingThe DataCenter Scalable Offering includes the part numbers and quantities identified in this table.Additional options for DataCenter Solutions are listed in the table labeled “Selectable Options”.206 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 445 8-way Datacenter Scalable Offering 1OptionNumberDescriptionTotal Qty8-wayUsageSelect one of the followingAll models ship with the maximum number ofprocessors standard8870-2CX8 x 2.7GHz/400MHz-2MB Xeon MP, 4GB mem, W2K DC, openbay,DVD-ROM, RSA II18870-2FX8 x 2.7GHz/400MHz-2MB Xeon MP, 4GB mem, WS03 DC, openbay,DVD-ROM, RSA II18870-4CX8 x 3.0GHz/400MHz-4MB Xeon MP, 4GB mem, W2K DC, openbay,DVD-ROM, RSA II18870-4FX8 x 3.0GHz/400MHz-4MB Xeon MP, 4GB mem, WS03 DC, openbay,DVD-ROM, RSA II1Select memory requiredSelect in matched pairs. Up to 16 DIMMs perchassis without SMP Expansion module; up to32 DIMMs per chassis with SMP Expansionmodule. All models ship standard with 4GB ofmemory via 4 x 1GB DIMMs.33L5038 512MB PC2100 ECC DDR RDIMM -33L5039 1GB PC2100 ECC DDR RDIMM -33L5040 2GB PC2100 ECC DDR RDIMM -Select one of the following1 ServeRAID adapter is required per node.02R0988 ServeRAID-6M Controller (256MB Cache) 132P0033 ServeRAID-6M Controller (128MB Cache) 1Select HDD Required32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 232P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 232P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD 232P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 232P073573.4GB 15K rpm Ultra320 SCSI Hot-swap HDD1. All final customer configurations and solutions require IBM Solution Assurance Approval.The Datacenter Scalable Offering includes the part numbers and quantities identified in this table.Additional options for Datacenter Solutions are listed in the table labeled “Selectable Options.”Chapter 23. Datacenter Solution Program 207


xSeries 445 16-way Datacenter Scalable Offering 1OptionNumberDescriptionTotal Qty16-wayTotal Qty2 Node16-wayTotal Qty4 Node16-wayUsageSelect one of the followingAll models ship with the maximumnumber of processors standard.8870-2CX8870-2FX8870-4CX8870-4FX8 x 2.7GHz/400MHz-2MB Xeon MP, 4GB mem,W2K DC, open-bay, DVD-ROM, RSA II8 x 2.7GHz/400MHz-2MB Xeon MP, 4GB mem,WS03 DC, open-bay, DVD-ROM, RSA II8 x 3.0GHz/400MHz-4MB Xeon MP, 4GB mem,W2K DC, open-bay, DVD-ROM, RSA II8 x 3.0GHz/400MHz-4MB Xeon MP, 4GB mem,WS03 DC, open-bay, DVD-ROM, RSA IIScalability Kit2 4 82 4 82 4 82 4 802R2013 Two Chassis 16-way Configuration Kit 1 2 4 Allows two chassis to be connectedtogether providing a 16-way capableconfiguration.Select memory required Select in matched pairs. Up to 16DIMMs per chassis without SMPExpansion module; up to 32 DIMMs perchassis with SMP Expansion module.All models ship standard with 4GB ofmemory via 4 x 1GB DIMMs.33L5038 512MB PC2100 ECC DDR RDIMM Min. of 2 - -33L5039 1GB PC2100 ECC DDR RDIMM Min. of 2 - -33L5040 2GB PC2100 ECC DDR RDIMM Min. of 2 - -Select one of the following02R0988 ServeRAID-6M Controller (256MB Cache) 1 2 432P0033 ServeRAID-6M Controller (128MB Cache) 1 2 4Select HDD required Two HDDs per node required. 232P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 832P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 832P0728146.8GB 10K rpm Ultra320 SCSI Hot-swapHDD2 4 832P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4 832P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4 8Note: A node represents a single instance of the operating system. For x445 Datacenter 16-way configurations, a node consists of twochassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. One of the two chassis in each node will contain two HDDs.208 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 445 Scalable Offering - Selectable Options 1Selectable Options 2WarrantyServiceUpgrade24x7x4 hrsWarrantyServiceUpgrade24x7x2 hrsEnterpriseRackAssemblyFeeOptionNumberDescription Usage OptionNumberOptionNumberOptionNumberI/O Controllers24P0960 FC2-133 Host Bus Adapter Two per node for loadbalancing and redundancy.- - -22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter One per node. - - -31P6301 NetXtreme 1000 T Ethernet Adapter (copper) One per node. - - -31P6401174290U174290XNetXtreme 1000 T Dual Port Ethernet Adapter(copper)External Fibre Channel Storage 3FAStT900 Fibre Channel Storage Server (U.S. linecord)FAStT900 Fibre Channel Storage Server (no linecord)One per node. - - -- 96P2062 96P2063 21P3342- 96P2062 96P2063 21P334217401RU FAStT EXP700 Storage Expansion Unit - 41L2768 41L2769 21P334224P7984 Upgrade from 16 to 64 Storage Partitions - - - -24P7985 FAStT900 FlashCopy Activation - - - -24P7986 FAStT900 Remote Mirror Activation - - - -Fibre Channel HDD OptionsMultiple of two per bundle06P5761 36.4GB 10K rpm 2Gbps FC Hot-swap HDD - - - -06P5762 73.4GB 10K rpm 2Gbps FC Hot-swap HDD - - - -06P5771 18.2GB 15K rpm 2Gbps FC Hot-swap HDD - - - -06P5772 36.4GB 15K rpm 2Gbps FC Hot-swap HDD - - - -Cables, connectors and switches:19K1247 1m LC-LC Fibre Channel Cable - - - -19K1248 5m LC-LC Fibre Channel Cable - - - -19K1249 25m LC-LC Fibre Channel Cable - - - -19K1271 Short-wave SFP Module - - - -2109F16 SAN Fibre Channel Switch, 16-port - 96P2033 96P2034 21P334218P3576 Additional Power Supply for 2109F16 - - - -3534F08 TotalStorage SAN Switch F08 - 8-port - 96P1994 96P1995 -Other I/O8684-1RX RXE-100 Remote Expansion Enclosure - 96P2469 96P2470 -31P5998 Remote I/O PCI-X 6-slot Expansion Kit - - - -419K5788 25ft Ethernet Crossover Cable - - - -31L3820 Fast Ethernet on STP Adapter 2.5m Cable Attachment from Ethernetadapter to Ethernet switch- - -Tape Drives 500N8016 100/200GB LTO Tape Drive - - - -59P6744 LTO FH Generation-2 Tape Drive Option - - - -Chapter 23. Datacenter Solution Program 209


Rack-related930842S NetBAY42 Enterprise Rack Cabinet (ER) - 41L2762 41L2763 21P3341930842E NetBAY42 Enterprise Expansion Rack Cabinet (EX) - 41L2762 41L2763 21P334132P170232P1703NetBAY 2U Flat Panel Monitor Console Kit (withU.S. Space Saver keyboard)NetBAY 2U Flat Panel Monitor Console Kit (withoutkeyboard)- - - -- - - -94G6670 Blank Filler Panel Kit Fills empty front panel space tocontrol air flow- - -09N4290 NetBAY 1x4 Console Switch - - - -09N4291 NetBAY 2 x 8 Console Switch - - - -94G7447 NetBAY Console Cable Set 12ft (3.66m) - - - -94G7448 Power Cable Type C12 (3.7m, 12ft) Provides IEC 320-C13 (Device)to IEC 320-C14 (Power Unit)power cord.- - -37L6886 NetBAY Three-phase Front-end 30a PDU (US) - - - -94G6666 100-120v Power Distribution Unit - - - -2130R31 UPS3000XHV (US) - - - -31P1692 UPS Extend Run Battery Pack - - - -06P3882 44818-GBX4818-CBXCisco CAT2912 12-port Ethernet Switch/EnterpriseEditionSoftware Update Subscriptions 6Software Update Subscription for MicrosoftWindows 2000 Datacenter, 1-8 processorsSoftware Update Subscription for MicrosoftWindows Server 2003 Datacenter Edition, 1-8processorsWarranty ServicesUsed for heartbeat interconnect. - - 21P3342- - - -- - - -96P2688 3 Year On-Site Repair: 24 x 7 x 4 - - - -96P2689 3 Year On-Site Repair: 24 x 7 x 2 7 - - - -Note: A node represents a single instance of the operating system. For x445 Datacenter 16-way configurations, a node consists oftwo chassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. Selectable options are additional, certified options for use with IBM Datacenter solutions.3. Refer to the Fiber Channel Solutions section for more information of FAStT storage devices.4. Part number may vary outside of North America.5. Tape drives are not supported internally. An external tape enclosure is required. Additional tape drive and tape library attributes, requirementsand options can be found in the Tape Drive Attributes and Tape Library Attributes appendices, respectively.6. Annual subscription services ensure that customers can upgrade future releases of the Microsoft Datacenter operating system. Maintenanceupdates are not included in this subscription license. All Datacenter OS maintenance updates are available directly from Microsoft.7. 24x7x2 warranty service is limited to selected locations. For list, see Fax #8146 on 1-800-IBM-4FAX.xSeries 455 Datacenter Solution: Scalable OfferingThe Datacenter Scalable Offering includes the part numbers and quantities identified in this table.Additional options for Datacenter Solutions are listed in the table labeled “Selectable Options.”210 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 455 4-way Datacenter Scalable Offering 1OptionNumberDescription Total Qty UsageSelect one of the followingAll models ship with the maximum number ofprocessors standard.8855-2BX8855-3BX4 x 1.4GHz/400MHz-4MB Itanium 2, 2GB mem, WS03DC, open-bay, CD-RW/DVD, RSA4 x 1.5GHz/400MHz-6MB Itanium 2, 2GB mem, WS03DC, open-bay, CD-RW/DVD, RSA11Select memory requiredSelect in matched pairs, up to 28 DIMMs perchassis. All models ship standard with 2GB ofmemory via 2 x 1GB DIMMs.33L5038 512MB PC2100 ECC DDR RDIMM Min. of 233L5039 1GB PC2100 ECC DDR RDIMM Min. of 233L5040 2GB PC2100 ECC DDR RDIMM Min. of 2Select one of the following1 ServeRAID adapter is required per node.02R0988 ServeRAID-6M Controller (256MB Cache) 132P0033 ServeRAID-6M Controller (128MB Cache) 1Select HDD requiredTwo HDDs required per node.32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 232P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 232P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD 232P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 232P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 21. All final customer configurations and solutions require IBM Solution Assurance Approval.The Datacenter High Availability Program includes the part numbers and quantities identified in this table.Additional options for Datacenter Solutions are listed in the table labeled “Selectable Options.”Chapter 23. Datacenter Solution Program 211


xSeries 455 8-way Datacenter Scalable Offering 1OptionNumberDescriptionTotal Qty8-wayTotal Qty2-Node 8-wayUsageSelect one of the followingAll models ship with the maximumnumber of processors standard.8855-2BX8855-3BX4 x 1.4GHz/400MHz-4MB Itanium 2, 2GB mem,WS03DC, open-bay, CD-RW/DVD, RSA4 x 1.5GHz/400MHz-6MB Itanium 2, 2GB mem,WS03 DC, open-bay, CD-RW/DVD, RSAScalability Kit2 42 473P9911 4-way to 8-way Scalability option 1 2 Allows two chassis to be connectedtogether, providing an 8-way capableconfiguration. Includes two 2.5mmcables.Select memory requiredSelect in matched pairs, up to 28 DIMMsper chassis. All models ship standardwith 2GB of memory via 2 x 1GB DIMMs.33L5038 512MB PC2100 ECC DDR RDIMM Min. of 2 -33L5039 1GB PC2100 ECC DDR RDIMM Min. of 2 -33L5040 2GB PC2100 ECC DDR RDIMM Min. of 2 -Select one of the following1 ServeRAID adapter is required pernode.02R0988 ServeRAID-6M Controller (256MB Cache) 1 232P0033 ServeRAID-6M Controller (128MB Cache) 1 2Select HDD required Two HDDs per node required 232P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 432P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 432P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 432P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 432P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4Note: A node represents a single instance of the operating system. For x455 Datacenter 8-way configurations, a node consists of twochassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. One of the two chassis in each “node” will contain two HDDs.The Datacenter Scalable Offering Program includes the part numbers and quantities identified in this table.Additional options for Datacenter Solutions are listed in the table labeled “Selectable Options.”212 Configuration and Options Guide


Refer to the Important Notices section for important noticesxSeries 455 16-way Datacenter Scalable Offering 1OptionNumberDescriptionTotal Qty16-wayTotal Qty2 Node16-wayTotal Qty4 Node16-wayUsageSelect one of the followingAll models ship with the maximumnumber of processors standard.8855-2BX8855-3BX4 x 1.4GHz/400MHz-4MB Itanium 2, 2GB mem,WS03DC, open-bay, CD-RW/DVD, RSA4 x 1.5GHz/400MHz-6MB Itanium 2, 2GB mem, WS03DC, open-bay, CD-RW/DVD, RSAScalability Kit4 8 164 8 1673P9911 4-way to 8-way Scalability Option 1 2 4 Allows two chassis to be connectedtogether providing an 8-way capableconfiguration. Includes two 2.5mmcables.73P9715 8-way to 16-way Supplemental Option 1 2 4 Allows two 8-way nodes to beconnected together providing a 16-waycapable configuration. Includes one3.5m cable and three 2.5m cables.Select memory requiredSelect in matched pairs up to 28 DIMMsper chassis. All models ship standardwith 2GB of memory via 2 x 1GBDIMMs.33L5038 512MB PC2100 ECC DDR RDIMM Min. of 2 - -33L5039 1GB PC2100 ECC DDR RDIMM Min. of 2 - -33L5040 2GB PC2100 ECC DDR RDIMM Min. of 2 - -Select one of the following1 ServeRAID adapter is required pernode.02R0988 ServeRAID-6M Controller (256MB Cache) 1 2 432P0033 ServeRAID-6M Controller (128MB Cache) 1 2 4Select HDD required Two HDDs per node required 232P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 832P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 832P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 4 832P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4 832P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4 8Note: A node represents a single instance of the operating system. For x455 Datacenter 16-way configurations, a node consists of fourchassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. One of the four chassis in each “node” will contain two HDDs.Chapter 23. Datacenter Solution Program 213


xSeries 455 Datacenter Scalable Offering - Selectable Options 1Selectable Options 2WarrantyServiceUpgrade24x7x4 hrsWarrantyServiceUpgrade24x7x2 hrsEnterpriseRackAssemblyFeeOptionNumberDescription Usage OptionNumberOptionNumberOptionNumberI/O Controllers24P0960 FC2-133 Host Bus Adapter Two per node for loadbalancing and redundancy.- - -22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter One per node. - - -31P6301 NetXtreme 1000 T Ethernet Adapter (copper) One per node. - - -31P6401NetXtreme 1000 T Dual Port Ethernet Adapter(copper)One per node. - - -31P9601 PRO/1000 MT Server Adapter by Intel One per node. - - -External Fibre Channel Storage174290U174290XFAStT900 Fibre Channel Storage Server (U.S. linecord)FAStT900 Fibre Channel Storage Server (no linecord)96P2062 96P2063 21P334296P2062 96P2063 21P334217401RU FAStT EXP700 Storage Expansion Unit 41L2768 41L2769 21P334224P7984 Upgrade from 16 to 64 Storage Partitions - - -24P7985 FAStT900 FlashCopy Activation - - -24P7986 FAStT900 Remote Mirror Activation - - -Fibre Channel HDD OptionsMultiple of two per bundle06P5761 36.4GB 10K rpm 2Gbps FC Hot-swap HDD - - -06P5762 73.4GB 10K rpm 2Gbps FC Hot-swap HDD - - -06P5771 18.2GB 15K rpm 2Gbps FC Hot-swap HDD - - -06P5772 36.4GB 15K rpm 2Gbps FC Hot-swap HDD - - -Cables, connectors and switches:19K1247 1m LC-LC Fibre Channel Cable - - -19K1248 5m LC-LC Fibre Channel Cable - - -19K1249 25m LC-LC Fibre Channel Cable - - -19K1271 Short-wave SFP Module - - -2109F16 SAN Fibre Channel Switch, 16-port 96P2033 96P2034 21P334218P3576 Additional Power Supply for 2109F16 - - -3534F08 TotalStorage SAN Switch F08 - 8-port 96P1994 96P1995 -Other I/O8684-1RX RXE-100 Remote Expansion Enclosure 96P2469 96P2470 -31P5998 Remote I/O PCI-X 6-slot Expansion Kit - - -319K5788 25ft Ethernet Crossover Cable - - - -31L3820 Fast Ethernet on STP Adapter 2.5m Cable Attachment from Ethernetadapter to Ethernet switch- - -Rack-related:930842S NetBAY42 Enterprise Rack Cabinet (ER) 41L2762 41L2763 21P3341214 Configuration and Options Guide


Refer to the Important Notices section for important notices930842E NetBAY42 Enterprise Expansion Rack Cabinet (EX) 41L2762 41L2763 21P334132P170232P1703NetBAY 2U Flat Panel Monitor Console Kit (withU.S. Space Saver keyboard)NetBAY 2U Flat Panel Monitor Console Kit (withoutkeyboard)- - -- - -94G6670 Blank Filler Kit Fills empty front panel space tocontrol air flow09N4290 NetBAY 1x4 Console Switch Attaches up to 4 nodes to asingle monitor, keyboard andmouse.- - -- - -09N4291 NetBAY 2 x 8 Console Switch - - - -94G7447 NetBAY Console Cable Set 12ft (3.66m) - - - -94G7448 Power Cable Type C12 (3.7m, 12ft) Provides IEC 320-C13 (Device)to IEC 320-C14 (Power Unit)power cord.- - -37L6886 NetBAY Three-phase Front-end 30a PDU (US) - - -94G6666 100-120v Power Distribution Unit - - -2130R31 UPS3000XHV (US) - - -31P1692 UPS Extend Run Battery Pack - - -06P3882 34818-EAXCisco CAT2912 12-port Ethernet Switch/EnterpriseEditionSoftware Update Subscriptions 4Software Update Subscription for MicrosoftWindows Server 2003 Datacenter Edition, 1-4processors (Yearly)Warranty ServicesUsed for heartbeat interconnect. - - 21P3342- - -96P2688 3 Year On-Site Repair: 24 x 7 x 4 - - -96P2689 3 Year On-Site Repair: 24 x 7 x 2 5 - - -Note: A node represents a single instance of the operating system. For x455 Datacenter 8-way configurations, a node consists oftwo chassis; for 16-way configurations, a node consists of four chassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. Selectable options are additional, certified options for use with IBM Datacenter solutions.3. Part number may vary outside of North America.4. Annual subscription services ensure that customers can upgrade future releases of the Microsoft Datacenter operating system. Maintenanceupdates are not included in this subscription license. All Datacenter OS maintenance updates are available directly from Microsoft.5. 24x7x2 warranty service is limited to selected locations. For list, see Fax #8146 on 1-800-IBM-4FAX.Chapter 23. Datacenter Solution Program 215


216 Configuration and Options Guide


Chapter 24. eServer 325eServer 325 At-A-GlancePart Number 1, 2AMD Processor ModelNumber of Processors (Std/Max)CacheMemory (Std/Max) 3, 4Form FactorPower Supply Quantity (Std/Max) 5Hot-Swap (Power, Slots, HDD, Fans)Redundancy (Optional, Standard)System Management ProcessorsOnboard Ethernet 6Storage Controller 7Removable Media Bays (Total/Avail)Internal HDD Storage (Std/Max) 8, 9CD-ROM (IDE)Bays (Total/Avail)Slots (Total/Avail)8835-31X 242 1/2 1MBL21GB/12GBRack(1U)1/14 H - Y 2 x 1Gb SingleU3201/0 0/293.6GB 24x-10x 3/2 2/28835-32X 242 1/2 1MBL21GB/12GBRack(1U)1/1 - - Y 2 x 1Gb EIDE 1/0 80GB/240GB 24x-10x 3/1 2/28835-51X 246 1/2 1MBL21GB/12GBRack(1U)1/1 H - Y 2 x 1Gb SingleU3201/0 0/293.6GB 24x-10x 3/2 2/28835-52X 246 1/2 1MBL21GB/12GBRack(1U)1/1 - - Y 2 x 1Gb EIDE 1/0 80GB/240GB 24x-10x 3/1 2/28835-61X 248 1/2 1MBL21GB/12GBRack(1U)1/1 H - Y 2 x 1Gb SingleU3201/0 0/293.6GB 24x-10x 3/2 2/28835-62X 248 1/2 1MBL21GB/12GBRack(1U)1/1 - - Y 2 x 1Gb EIDE 1/0 80GB/240GB 24x-10x 3/1 2/28835-71X 250 1/2 1MBL21GB/12GBRack(1U)1/1 H - Y 2 x 1Gb SingleU3201/0 0/293.6GB 24x-10x 3/2 2/28835-72X 250 1/2 1MBL21GB/12GBRack(1U)1/1 - - Y 2 x 1Gb EIDE 1/0 80GB/240GB 24x-10x 3/1 2/21. eServer 325 also provides four USB ports (two in front and two in rear) and one serial port (16550A-compatible).It does not ship with a diskettedrive. eServer 325 installs in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See Rack Cabinets and Optionssection for supported IBM racks.2. All models include a one-year parts and labor warranty3. All models support two-way memory interleaving and Chipkill technology.4. Uni-processor systems support a maximum of 8GB and dual-processor systems support a maximum of 12GB.5. A single 411w power supply is standard. Redundancy and hot-swap are not supported.6. Broadcom 5704 integrated dual gigabit Ethernet controllers.7. The single-channel, 64-bit, Ultra320 LSI integrated controller on SCSI models supports RAID-1 mirroring. Mirrored HDDs must match.8. All models support up to two HDDs.9. Maximum storage is based on two 146.8GB SCSI HDDs for SCSI models and two 120GB IDE HDDs for EIDE models. Any standard HDD mayneed to be replaced.eServer 325 Processor OptionsSBBNumberOptionNumberProcessor UpgradesSMPSupport 188P9619 24P8190 AMD Opteron Processor Model 242 3xX88P9663 13N0700 AMD Opteron Processor Model 246 5xX13N2864 13N0701 AMD Opteron Processor Model 248 6xX13M7270 13N0702 AMD Opteron Processor Model 250 7xX1. All models support up to two of the same processor model.217


eServer 325 Memory OptionsSBB Number Option Number Memory Description 1, 288P9638 73P2266 512MB PC2700 ECC DDR SDRAM RDIMM73P2575 73P2267 1GB PC2700 ECC DDR SDRAM RDIMM22P9270 73P2269 2GB PC2700 ECC DDR SDRAM RDIMMNote: Two 512MB DIMMs are standard in 1GB models; four 512MB DIMMs arestandard in the 2GB models.1. Due to two-way interleaving, DIMMs must be installed in pairs.2. DIMMs feature Chipkill technology.Uni-processor memory configurationDIMM Pair DIMM Sockets Installation SequenceSet 1 DIMM 1 & DIMM 2 1st (standard in all models)Set 2 DIMM 3 & DIMM 4 2ndN/A 11. DIMM sockets five and six are not used in uni-processor configurations.Dual-processor memory configurationDIMM Pair DIMM Sockets Installation SequenceSet 1 DIMM 1 & DIMM 2 1st(standard in all models)Set 2 DIMM 5 & DIMM 6 2ndSet 3 DIMM 3 & DIMM 4 3rd218 Configuration and Options Guide


Refer to the Important Notices section for important noticeseServer 325 Internal CablingIDE ConfigurationsThe standard IDE HDD is cabled to the primary IDE controller using a two-drop IDE cable. An additionalIDE HDD may be installed in the available HDD bay and connected to the second drop of the standardtwo-drop IDE cable. A single-drop IDE cable connects the standard CDROM to the secondary IDEconnector.SCSI ConfigurationsSCSI models support two hot-swap SCSI HDDs on a DASD backplane. The backplane is connected to theintegrated Ultra320 single-channel controller through a 16-bit nonterminated SCSI cable. Attachment ofexternal SCSI devices require a supported optional SCSI or RAID controller. A single-drop IDE cableconnects the standard CDROM to the secondary IDE controller.RAID configurations are supported by the integrated LSI chipset, which provides integrated mirroring.Optional ServeRAID-4Lx or -6M controllers can be installed to support the internal HDDs, in which casethe standard cable would be used to attach the backplane to the RAID controller.eServer 325 Hard Disk Drive (HDD) and Optical Storage OptionsSBBNumberPartNumberDescription Height BaysSupported 1MaximumQuantityEIDE HDDs 274P5145 22P7157 40GB 7200 rpm ATA-100 (EIDE) HDD SL 2, 3 249P2895 09N4226 80GB 7200 rpm ATA-100 (EIDE) HDD SL 2, 3 202R2677 09N4231 120GB 7200 rpm ATA-100 (EIDE) HDD SL 2, 3 2Hot-swap Ultra320 HDDs 232P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 2, 3 232P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 2, 3 232P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 2, 3 232P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 2, 3 232P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 2, 3 2Optical Devices59P5800 22P7047 8x Max Slimline DVD-ROM Drive 3External Storage Expansion Units 1SL 1 1FormFactor- 17331RU EXP400 Storage Expansion Unit Rack(3U)- 1724100 FAStT100 Storage Server Rack(3U)- 17226LU FAStT600 Entry Storage Server Rack(3U)1. eServer 325 does not include an external SCSI connector. To configure a SCSI storage device, select an optional SCSI controllerthen refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller supports the desired External Storage ExpansionUnit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.For Fibre Channel storage devices, refer to the Fibre Channel Solutions Overview section.2. Mixing of IDE and SCSI hard disk drives is not supported.3. Requires removing and replacing the standard optical drive.Chapter 24. eServer 325 219


Bay Form Factor Height Front Access Usage1 189mm (3.5in) Slim yes Standard optical2 2Hot-swap or fixedSL yes (SCSI) 389mm (3.5in) 1HDD23 Hot-swap or fixedSL yes (SCSI) 3 HDD89mm (3.5in) 11. Bays two and three are hot swap on SCSI models; fixed on IDE models.2. Bays two and three are not front-accessible on IDE models.3. On SCSI models, install SCSI boot drive in bay two. On IDE models, install IDE primary master drive inbay three.eServer 325 I/O OptionsSBBNumberOptionNumberDescriptionAdapterLengthPCI Support 1SlotsSupportedHot-PlugStorage Controllers 202R0996 02R0988 ServeRAID-6M Controller (256MB Cache) Full 64-bit/133MHz 1 -02R0225 32P0033 ServeRAID-6M Controller (128MB Cache) Full 64-bit/133MHz 1 -24P3472 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller 3Half 64-bit/66MHz 1, 2 -Fibre Storage Controllers and Options24P0963 24P0960 FC2-133 Host Bus Adapter Half 64-bit/133MHz 1, 2 -- 1724100 FAStT100 Storage Server - - - -- 17421RU FAStT700 Fibre Channel Storage Server - - - -- 35421RU FAStT200 Storage Server - - - -- 35422RU FAStT200 HA Storage Server - - - -- 172260U FAStT600 Storage Server (US line cord, English pubs) - - - -- 174290U FAStT900 Storage Server (US line cord) - - - -- 3534F08 TotalStorage SAN Switch F08, 8-port - - - -- 2109F16 SAN Fibre Channel Switch, 16-port - - - -Networking32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit/133MHz 1, 2 X31P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) Half 64-bit/133MHz 1, 2 X1. eServer 325 supports 3.3v or universal adapters only.2. eServer 325 has a single-channel, Ultra320 integrated controller that supports RAID-1 mirroring.3. Only external connections are supported with this adapter.220 Configuration and Options Guide


Refer to the Important Notices section for important noticesPCI 1:Bus 3, 100MHz, 64-bit, 3.3v, full-length, PCI-XeServer 325 rear vieweServer 325 Power and AccessoriesSBBNumberOptionNumberDescriptionMonitors- 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 1- 63324HN E74 Color Monitor 17in (406mm, 16in viewable image), business black 1- 32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 2- 32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 2Rack and NetBAY 3, 4- - Refer to Rack Cabinets and Options section for information concerning IBM racks andrack-supported devices.- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 73P5832 USB Conversion Option (four-pack) 613M7124 06P4069 USB Optical Wheel Mouse- 33L5151 USB Portable CD-ROM- 05K9276 USB Portable Diskette DriveConsole Connectivity 5Keyboard and MouseOther Accessories 71. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).2. Includes a 15in Flat Panel Monitor.3. eServer 325 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinetsand Options section.4. Note any limitations and restrictions required for adequate cooling in the Rack Cabinets and Options Section.If non-IBM racks are to be used, assure that both front and rear doors offer a minimum of 48% open area uniformlydistributed and in line with installed servers. A clearance of 51 to 64mm (2 to 2.5in) must be maintained betweenthe front door and the system unit’s front bezel. The rear door must maintain the same or greater clearance.5. Refer to the Rack Console Options section for information regarding console connectivity using these options.6. Required to connect one of the USB ports on the server to either a Local or Remote Console Manager. This optionkit contains four 1.5m USB conversion option cables, four 14in lengths of Cat5 cable, four large curly-lockcable connectors and an eight-pack of velcro strips.7. USB accessories attach to a single USB-capable server. They are not compatible with the NetBAY consoleswitches.Chapter 24. eServer 325 221


222 Configuration and Options Guide


Chapter 25. BladeCenter and BladeCenter T ChassisBladeCenter and BladeCenter T Chassis At-A-GlancePart NumberForm Factor (Width/Depth) 1Power ModulesPower Module Quantity (Std/Max)Hot-swap (Power, Bays, Blowers)Redundancy (Optional, Standard)Management Module (Std/Max) 2Switch Module Bays (Total/Avail)Optical DriveFloppy Disk DriveBlade Bays (Total/Avail)8677-2XXRack (7U)19in x 28in1800w AC(200v - 240v)2/4 P, B, B S-BlowersS-Power1/2 4/4 CD-ROM(24x-10x)USBFloppy14/14 38677-3XY 4Rack (7U)19in x 28in2000w AC(200v-240v)2/4 P, B, B S-Blowers,S-Power1/2 4/4 DVD-ROM(24x-10x)USBFloppy14/14 38720-1RXRack (8U)19in x 20in1300w DC(-48v - 60v)2/4 P, B, B S-BlowersS-Power1/2 4/4 CD-RW/DVD(24x-24x-24x-8x)- 58/8 68730-1RX 7Rack (8U)19in x 20in1300w AC(200v - 240v)2/4 P, B, B S-BlowersS-Power1/2 4/4 CD-RW/DVD(24x-24x-24x-8x)- 5 8/8 6Note: BladeCenter Chassis can provide increased density per rack over standalone 1U servers by housing multiple blades in lessrack space. BladeCenter solutions increase usability and reduces complexity by providing common sourcing for blade servers,cabling, cabling connections, I/O options, power modules, system management requirements (optional adapters and externalcabling), external Fibre Channel storage switching and connectivity, and network management and expansion.1. Housed in a 19in rack-mountable chassis.2. The management modules for BladeCenter (8677) include KVM components. BladeCenter T (8720, 8730) have KVM implemented as partof the main chassis.3. Supports up to 14 singlewide blade servers. Additional power supplies are required to maintain full redundancy beyond six blade servers.4. Model number 8677-3XY is a worldwide general available variant (GAV) model number which is not orderable as listed and needs to bemodified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for8677-3XY is 8677-3XU. See the product specific Official IBM announcement letter for other country-specific GAV model numbers.5. Does not ship with a floppy disk drive. An external FDD is supported attached to one of the two front-mounted USB ports.6. Supports up to 8 singlewide blade servers. Additional power supplies are required to maintain full redundancy beyond four blade servers.7. BladeCenter T Chassis that is NEBS compliant and designed specifically for telecommunications applications.BladeCenter Chassis, blade server support8677 8720 8730HS20 All All 1All 1HS40 All 51X, 61X, 6TX 51X, 61X, 6TXJS20 All None None1. All HS20 (8832) models are supported except for 8832-J1X.223


CD-ROMFDDBlade controlpanelFiller bladesBlades8677 front viewSCSI Storage Expansion Unit(attached to blade in bay 5)8720/8730 front view224 Configuration and Options Guide


Refer to the Important Notices section for important noticesBladeCenter Chassis I/O OptionsSBBNumberOptionNumberDescription Form Factor ChassisSupport 1NEBSCompliant 2Fibre Channel Storage Controllers- 174290U FAStT900 Storage Server (US line cord) Rack (4U) BC, BCT -- 17421RU FAStT700 Fibre Channel Storage Server Rack (4U) BC, BCT -- 172260U FAStT600 Storage Server (US line cord) Rack (3U) BC, BCT -- 17226LU FAStT600 Entry Storage Server Rack (3U) BC, BCT -- 35421RU FAStT200 Storage Server Rack (3U) BC, BCT -- 35422RU FAStT200 HA Storage Server Rack (3U) BC, BCT -- 1724100 FAStT100 Storage Server Rack (3U) BC, BCT -Fibre Channel Switches, Hubs and Routers- 2034212 McDATA Sphereon 4300 Fabric Switch Model 212 Rack (1U) BC 3-- 3534F08 TotalStorage SAN Switch F08 - 8-port Rack (1U) BC, BCT -- 2109F16 SAN Fibre Channel Switch, 16-port Rack (1U) BC, BCT -Fibre Channel External Storage Enclosures- 171010U FAStT EXP100 Storage Expansion Unit Rack (3U) BC, BCT -- 17401RU FAStT EXP700 Storage Expansion Unit Rack (3U) BC, BCT -- 35601RU FAStT EXP500 Storage Expansion Unit Rack (3U) BC, BCT -BladeCenter Switch Modules 426K5614 90P0165 5, 6Brocade Enterprise SAN Switch Module for BladeCenter BC26K5619 26K5601 Brocade Entry SAN Switch Module for BladeCenter5, 6 BC59P6627 48P7062 BladeCenter 2-port Fibre Channel Switch Module5, 6 - BC, BCT Y13N0567 13N0568 BladeCenter 4-port Gb Ethernet Switch Module7 - BC, BCT -- 90P3776 BladeCenter T 4-port Gb Ethernet Switch Module 8 - BCT Y13N2287 13N2281 Cisco Systems Intelligent Gb Ethernet Switch Module 7 - BC -73P9043 73P9057 7Nortel Networks Layer 2-7 GbE Switch Module - BC, BCT Y02R9081 02R9080 9BladeCenter Optical Pass-thru Module - BC, BCT -73P5989 73P5992 10BladeCenter Optical Pass-thru Module SC Cable - BC -73P6031 73P6033 BladeCenter Optical Pass-thru Module LC Cable10 - BC -73P6096 73P6100 BladeCenter Copper Pass-thru Module 7 - BC -73P6101 BladeCenter Copper Pass-thru Module Cable11 - BC -System Management48P7081 48P7055 BladeCenter Redundant KVM/Management Module Option - BC -- 90P3741 BladeCenter T Redundant Management Module Option - BCT Y12, 13Blade Server Expansion CardsNote: Installation of additional options into the BladeCenter and BladeCenter T chassis may require power upgrades. Refer to "Power andAccessories" section for more information.1. BC = BladeCenter 8677; BCT = BladeCenter Telco (8720, 8730).2. An absence of a ’Y’ does not necessarily mean that the component is not NEBS compliant.3. Currently not available for HS40 blade servers.Chapter 25. BladeCenter and BladeCenter T Chassis 225


4. Mixing Ethernet (including Copper Pass-thru Module (CPM)) and Fibre/SAN switches in I/O module bays 3 and 4 is not supported. However, mixingOptical Pass-thru modules (OPM) and Ethernet or Fibre/SAN switches in bays 3 and 4 is supported.5. Short- or Long-wave SFP Modules (P/N 19K1271 or 19K1272) are required for each fibre channel port connection.6. Installs in I/O module bays 3 or 4. When installed in bay 3, port 1 is enabled on blade-installed Fibre Channel expansion cards. When installed inbay 4, port 2 is enabled on blade-installed Fibre Channel expansion cards.7. Maximum of four allowed and can be installed in any I/O module bay. When installed in I/O module bay 1, integrated Ethernet controller 1 is enabledon all blades. When installed in bay 2, integrated Ethernet controller 2 is enabled on all blades. Installation in I/O module bays 3 or 4 requires anEthernet expansion card to be installed in blade servers.8. Maximum of four. A single switch module can support up to eight 2-way blade servers or four 4-way blade servers. A second switch module can beinstalled in bay 2 for redundancy. Installation in I/O module bays 3 or 4 requires an Ethernet expansion card to be installed in blade servers.9. Maximum of four allowed and can be installed in any I/O module bay. Must be installed in I/O module bay 4 when Myrinet cluster expansion cardsare installed in blade servers.10. This cable is 1.5m in length and provides four connections between the optical pass-thru-module (OPM) and an external Ethernet or fibre environment.11. Provides five copper connections between the copper pass-thru module (CPM) and an external gigabit Ethernet environment. A maximum of 15connections per CPM is supported. One CPM cable ships with the CPM option. Two additional cables can be installed.12. Expansion cards install in the blade servers and communicate with optional switch modules installed in the BladeCenter chassis. Port 1 on expansioncards communicates with BladeCenter I/O module bay 3; port 2 on expansion cards communicates with BladeCenter I/O module bay 4. Differingexpansion cards can be installed among blades as long as OPM I/O modules are installed in BladeCenter I/O module bays 3 and 4.13. Refer to the individual blade server data for expansion card options and configuration information.226 Configuration and Options Guide


Refer to the Important Notices section for important noticesSwitch modulebay 3Switch module 1Power modulebay 3Blower module 1Power module 1Ethernet portsACDCManagementmoduleKeyboardVideoMouseACDCOptional RedundantManagement ModuleBlower module 2Power module bay 4Switch module 2Switch module bay 48677 rear viewPower module 2Rear system LED panelI/O module bay 2I/O module bay 1KVM m od uleLAN m od uleDC PowerAC PowerI/O module bay 4I/O module bay 38730 and 8720 rear viewChapter 25. BladeCenter and BladeCenter T Chassis 227


BladeCenter Power and AccessoriesSBBNumberOptionNumberDescriptionPower - BladeCenter Chassis (8677) 113N0593 13N0570 BladeCenter 1800w Power Supply Modules 226K4829 26K4816 BladeCenter 2000w Power Supply Modules 3Power - BladeCenter T Chassis (8720, 8730) 4- 90P3742 BladeCenter Telco 1300w DC Power Supply Modules 5- 90P3743 BladeCenter Telco 1300w AC Power Supply Modules 6- 37L6861 APC Smart-UPS 5000RMB 7Uninterruptible Power Supply (UPS)Note: Refer to Appendix eServer BladeCenter Power Upgrade Guidelines for important information that willhelp determine when a BladeCenter power module upgrade is necessary.1. The BladeCenter chassis’ ship standard with two hot-swap power modules which support blade servers in bays 1through 6 and all module bays. When one or more blade servers are installed in blade bays 7 through 14, the appropriatepower supply modules option must be installed in power module bays 3 and 4.2. The 1800w Power Supply Modules option contains two 1800w hot-swap power supply modules and two 2.8m/9ftIEC 320-C19 to IEC 320-C20 rack power cables. Not supported in 8677-3xx.3. The 2000w Power Supply Modules are a mandatory upgrade for 8677-2XX in order to support BladeCenter bladeservers with Intel’s Xeon processor with EM64T. This option contains two hot-swap power supply modules and two2.8m/9ft IEC 320-C19 to IEC 320-C20 rack power cables.4. The BladeCenter T chassis’ ship standard with two hot-swap power modules which support blade servers in bays1 through 4, switch module bays 1 and 2, both management modules and the media tray. When one or more bladeservers are installed in blade bays 5 through 8, and/or switch modules installed in switch module bays 3 or 4, theappropriate power supply modules option must be installed in power module bays 3 and 4.5. Available for 8720 only. Includes two 1300w -48v to -60v DC power supplies. DC power cable is customer provided.6. Available for 8730 only. Includes two 1300w 200v to 240v AC power supplies and two 2.8m IEC 309-C19 to IEC 309-C20 intra-rack cables7. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.BladeCenter Standard Power ConfigurationModelPowerModulesPower Cord8677-2XX 2 x 1800w 2 x 2.5m/8.2ft, 100-240V IEC 320-C19 to IEC 320-C20 rack power cables8677-3XY 2 x 2000w 2 x 2.5m/8.2ft, 100-240V IEC 320-C19 to IEC 320-C20 rack power cables8720-1RX 2 x 1300w, -48v to -60v DC8730-1RX 2 x 1300w,200v to 240vACDC power cables are customer supplied2 x 2.8m/9ft, 100-240V, IEC 320-C13 to IEC 320-C20 rack power cables228 Configuration and Options Guide


Refer to the Important Notices section for important noticesSBBNumberOptionNumberDescriptionChassisSupport 1Rack and NetBAYRefer to the Rack Cabinets and Options section for information concerning IBM racks andrack-supported devices.- 90P3774 BladeCenter T 2-Post Rack Mount Kit BCT- 90P3775 BladeCenter T 4-Post Rack Mount Kit BCTConsole Connectivity 2- 1735L04 NetBAY Local Console Manager 3BC, BCT- 1735R16 NetBAY Remote Console Manager3 BC, BCT- 32P1636 250mm KVM Conversion Option BC, BCT- 32P1652 1.5m KVM Conversion Option BC, BCTAcoustic Option- 49P2694 BladeCenter Acoustic Attenuation Module 4BCMonitors- 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), business black 5BC, BCT- 63324HN 5E74 Color Monitor 17in (406mm, 16in viewable image), business black BC, BCT- 32P1031 NetBAY 1U Flat Panel Monitor Console Kit (with US Space Saver Keyboard) 6BC- 32P1032 NetBAY 1U Flat Panel Monitor Console Kit (without keyboard) 6 BC- 32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver Keyboard) 6 BC, BCT- 32P1703 6NetBAY 2U Flat Panel Monitor Console Kit (without Keyboard) BC, BCTKeyboard and Mouse 732P8917 28L3644 Space Saver II Keyboard 8, 902R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys business black 10BC, BCTBC, BCT02R3421 28L3673 Sleek 2-Button Business Black Mouse BC, BCT1. BC=BladeCenter (8677); BCT=BladeCenter Telco (8720, 8730).2. BladeCenter and BladeCenter T include a standard management module that provides system management connectivity for all installedblade servers. KVM is provided as part of the management module on BladeCenter. KVM is provided as part of the chassis onBladeCenter T.3. Supports up to three BladeCenter chassis on one ACT (Advanced Connectivity Technology) chain.4. Installs over the blower modules in the rear of the chassis to reduce decibels in sound-sensitive environments. BladeCenter generates80 decibels (8 bels) at maximum performance levels. The Acoustic Attenuation Module reduces the decibel level by 11 (approximately12%).5. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).6. Includes a 15in Flat Panel Monitor.7. BladeCenter supports rack configurations only and ships without a keyboard or mouse.8. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stores in ready-to-use position, or NetBAY 1U or 2UFlat Panel Monitor Console Kit (P/N 32P1032, 32P1702). Standard with 1U and 2U NetBAY console kits (P/N 32P1031, 32P1702).9. Advanced TrackPoint IV features are not available.10. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flatpanel display.Chapter 25. BladeCenter and BladeCenter T Chassis 229


230 Configuration and Options Guide


Chapter 26. BladeCenter HS20BladeCenter HS20 At-A-GlancePart Number 1Processor/FSB Speed (GHz/MHz) 2Number of Processors (Std/Max)CacheMemory (Std/Max) 3, 4Storage ControllerHDD Bays (Total/Avail) 5, 6Onboard Ethernet 7Integrated System Mgmt Processor 8Expansion Cards (Std/Max) 98832-9TX 2.4/533 1/2 512KB L2 1GB/8GB Dual ATA-100 2/2 2 x1Gb Y 0/18832-LTX 2.8/533 1/2 512KB L2 512MB/8GB Dual ATA-100 2/2 2 x1Gb Y 0/18832-M1X 3.06/533 1/2 512KB L2 512MB/8GB Dual ATA-100 2/2 2 x1Gb Y 0/110, 118832-N1X103.06/533 2/2 1MB L2 2GB/8GB Dual ATA-100 2/2 2 x 1Gb Y 0/18832-G1X 3.2/533 1/2 1MB L3 1GB/8GB Dual ATA-100 2/2 2 x1Gb Y 0/18832-GTX 3.2/533 1/2 1MB L3 1GB/8GB Dual ATA-100 2/2 2 x1Gb Y 0/18832-J1X 3.2/533 1/2 2MB L3 1GB/8GB Dual ATA-100 2/2 2 x1Gb Y 0/11. Blade server models xTx are designed to support the telecommunications industry.2. Intel Xeon processor with advanced transfer ECC L2 cache and 533MHz (quad-pumped) Front Side Bus (FSB). Some processors have anadditional L3 cache as noted in the table above.3. Memory is two-way interleaved, PC2100 ECC DDR RDIMMs.4. HS20 models LxX and MxX ship with non-Chipkill 256MB DIMMs whereas the other 512MB models ship with Chipkill 256MB DIMMs.5. Integrated mirroring is supported using IDE HDDs. However, when two IDE HDDs are installed, no I/O expansion cards can be installed.6. An optional SCSI expansion unit is available that attaches directly to the blade server adding two SCSI HDD bays. See HDD section formore information.7. Broadcom 5703 dual integrated copper gigabit Ethernet controller.8. System management functionality, interconnect network connectivity and console connectivity are managed through the standard managementmodule. The standard integrated service processor monitors HS20 system management activity, communicating with the managementmodule in the BladeCenter.9. Each installed expansion card will physically prevent installation of one IDE HDD and vice versa.10. Intel Xeon processor with Extended Memory 64 Technology (EM64T), L2 cache and a 533MHz (quad-pumped) Front Side Bus (FSB).11. This blade requires the BladeCenter Chassis to have the 2000w power supplies installed.HS20 Processor OptionsSBBNumberOptionNumberProcessor UpgradesSMPSupport 190P3835 13N0744 2.4GHz/533MHz-512KB L2 Cache Xeon Processor 29TX71P8835 73P9073 2.8GHz/533MHz-512KB L2 Cache Xeon Processor L1X, LTX71P8836 73P9074 3.06GHz/533MHz-512KB L2 Cache Xeon Processor 31X, M1X25K9518 13N0650 3.2GHz/533MHz-1MB L3 Cache Xeon Processor G1X, GTX25K9598 13N0743 3.2GHz/533MHz-2MB L3 Cache Xeon Processor J1X1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type,speed and cache size.2. This processor is NEBS compliant for the telecommunications industry.231


BatteryControl panelconnector (J64)IDE connector 1(J13)SCSI expansionconnector (J8)Network-interfaceoption connector (J34)IDE connector 2(J62)Microprocessorsocket 2and heat sink filler(U70)HS20 planarMicroprocessor 1and heat sink (U66)Network-interfaceoption connector (J9)DIMM socket 1 (J1)DIMM socket 2 (J5)DIMM socket 3 (J2)DIMM socket 4 (J6)HS20 Memory OptionsSBBNumberOptionNumberMemory Description 1, 273P2876 373P2868 512MB PC2100 ECC DDR RDIMM Kit 437L3538 33L5038 512MB PC2100 ECC DDR RDIMM33P3126 33L5039 1GB PC2100 ECC DDR RDIMM32P9223 33L5040 2GB PC2100 ECC DDR RDIMM1. Due to two-way interleaving, installation of memory options in pairs is required. Standard DIMMs are installedin sockets three and four. One DIMM pair is not required to match the other.2. Chipkill is available in 512MB DIMMs and above. Installation of a non-Chipkill DIMM will disable all Chipkillfunction.3. This SBB number contains one 256MB non-Chipkill DIMM.4. The 512MB kit contains two 256MB non-Chipkill DIMMs.Standard DIMM ConfigurationModel Std DIMM Configuration Chipkill31X, LxX, LTX, M1X 2 x 256MB PC2100 ECC DDR DIMM N 19TX,GxX, J1X 2 x 512MB PC2100 ECC DDR DIMM NN1X 2 x 1GB PC2100 ECC DDR DIMM Y1. Model 31X ships standard with ChipKill DIMMS.232 Configuration and Options Guide


Refer to the Important Notices section for important noticesHS20 Hard Disk Drive (HDD) Storage OptionsSBBNumberOptionNumberDescription Height BaysSupportedMaximumQuantity 1IDE HDDs 248P7099 48P7063 BladeCenter 40GB 5400 rpm ATA-100 HDD Slim 1, 2 2Flash Disk Drives 2, 325K8227 90P3771 BladeCenter 1GB Flash Disk Drive Slim 1, 2 225K8228 90P3772 BladeCenter 2GB Flash Disk Drive Slim 1, 2 225K8229 90P3773 BladeCenter 4GB Flash Disk Drive Slim 1, 2 2Hot-swap Ultra160 HDDs 432P9108 06P5755 36.4GB 10K rpm Ultra160 SCSI Hot-swap HDD SL 1, 2 232P9011 06P5756 73.4GB 10K rpm Ultra160 SCSI Hot-swap HDD SL 1, 2 232P0749 32P0750 146.8GB 10K rpm Ultra160 SCSI Hot-swap HDD SL 1, 2 232P9025 06P5768 36.4GB 15K rpm Ultra160 SCSI Hot-swap HDD SL 1, 2 2Hot-swap Ultra320 HDDs 432P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 2Storage Expansion 526K4852 26K4847 BladeCenter SCSI Storage Expansion Unit 6- - -1. Installation of a second IDE HDD (including the flash disk drives) will physically prevent installation of an expansion card.2. Integrated mirroring is supported using the IDE HDDs.3. The flash disk drives are IDE HDDs and adhere to the same cabling and configuration rules as the IDE HDDs.4. Requires the optional storage expansion unit.5. Either the BladeCenter PCI I/O Expansion Unit or the BladeCenter SCSI Storage Expansion unit can be attached to a single bladeserver, but not both.6. The optional, 1U, BladeCenter SCSI Storage Expansion Unit provides two hot-swap SCSI HDD bays and an integrated single-channelUltra320 storage controller that supports integrated mirroring. The expansion unit connects to the blade server and both units are installedtogether into the BladeCenter chassis.Chapter 26. BladeCenter HS20 233


HS20 I/O OptionsSBBNumberOptionNumberDescriptionForm FactorBlade Server Expansion Cards 1, 213N2204 13N2203 BladeCenter Fibre Channel Expansion Card -59P6613 48P7061 BladeCenter Fibre Channel Expansion Card -73P9029 73P9030 BladeCenter Gigabit Ethernet Expansion Card -73P5999 73P6000 Myrinet Cluster Expansion Card 3-PCI Expansion 4, 524P0963 24P0960 FC2-133 Host Bus Adapter Half02R0996 02R0988 ServeRAID-6M Controller (256MB Cache) Full02R0995 32P0033 ServeRAID-6M Controller (128MB Cache) Full71P8614 71P8594 Single Channel Ultra320 SCSI Controller Half- 06P3601 10/100 Ethernet Server Adapter Half- 31P9601 PRO/1000 MT Server Ethernet Adapter by Intel Half32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half31P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) Half32P9298 31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter (copper) Half13N1675 90P3721 BladeCenter PCI I/O Expansion Unit 61U Rack1. One expansion card is allowed per blade server and installs over IDE HDD bay 2, preventing installation ofsecond IDE HDD.2. Requires appropriate I/O modules to be installed in the BladeCenter chassis. Refer to ‘BladeCenter Storageand Communications Expansion’ for appropriate I/O module options and configuration information.3. Requires an OPM I/O module to be installed in BladeCenter I/O module bay 4.4. PCI Adapters must be installed in the optional BladeCenter PCI I/O Expansion Unit and provide external connectionsonly.5. Either the BladeCenter PCI I/O Expansion Unit or the BladeCenter SCSI Storage Expansion unit can be attachedto a single blade server, but not both.6. The optional, 1U, BladeCenter PCI I/O Expansion Unit provides two 64-bit/100MHz PCI-X slots. The expansionunit connects to the blade server and both units are installed as a single unit into the BladeCenter chassis.234 Configuration and Options Guide


Chapter 27. BladeCenter HS40BladeCenter HS40 At-A-GlancePart Number 1, 2Processor/FSB Speed (GHz/MHz) 3Number of Processors (Std/Max)CacheMemory (Std/Max) 4Storage ControllerHDD Bays (Total/Avail) 5, 6Onboard Ethernet 7Integrated System Management Processor 8I/O Expansion Cards (Std/Max) 98839-51X 2.2/400 1/4 2MB L3 1GB/16GB Dual ATA-100 2/2 4 x 1Gb Y 0/28839-61X 2.7/400 1/4 2MB L3 2GB/16GB Dual ATA-100 2/2 4 x 1Gb Y 0/28839-6TX2 2.7/400 1/4 2MB L3 2GB/16GB Dual ATA-100 2/2 4 x 1Gb Y 0/28839-71X 3.0/400 1/4 4MB L3 2GB/16GB Dual ATA-100 2/2 4 x 1Gb Y 0/21. 4-way, 2U blade servers which install into a supported BladeCenter or BladeCenter T chassis. Ship without keyboard andmouse.2. Blade server models xTx are designed to support the telecommunications industry.3. Intel Xeon Processor MP with L2 cache (512KB), L3 cache (see table) and a 400MHz (quad-pumped) Front Side Bus (FSB).4. Memory is two-way interleaved, PC2100 ECC DDR RDIMMs supporting Chipkill technology.5. Integrated mirroring is supported using IDE HDDs. However, when two IDE HDDs are installed, no I/O expansion cardscan be installed.6. An optional SCSI expansion unit is available that attaches directly to the bladeserver adding two SCSI HDD bays. See HDDsection for more information.7. Four Ethernet connections via one integrated dual Gb controller and two integrated single Gb controllers(Broadcom BCM5704S).8. System management functionality, interconnect network connectivity and console connectivity are managed through thestandard management module. The standard integrated service processor monitors HS40 system management activity, communicatingwith the management module in the BladeCenter.9. Each installed expansion card will physically prevent installation of one IDE HDD and vice versa.HS40 ProcessorsSBBNumberOptionNumberProcessor UpgradesSMPSupport 126K4854 13N0656 2.2GHz/400MHz-2MB L3 Cache Xeon Processor MP 5xX26K4855 13N0655 2.7GHz/400MHz-2MB L3 Cache Xeon Processor MP 6xX90P0972 13N0653 2.8GHz/400MHz-2MB L3 Cache Xeon Processor MP 4xX26K4856 13N0654 3.0GHz/400MHz-4MB L3 Cache Xeon Processor MP 7xX1. Up to three additional processors may be installed, providing a maximum of four. All processors must be identicalin type, speed and cache size.235


HS40 Memory OptionsSBBNumberOptionNumberMemory Description 1, 237L3538 33L5038 512MB PC2100 ECC DDR RDIMM33P3126 33L5039 1GB PC2100 ECC DDR RDIMM32P9223 33L5040 2GB PC2100 ECC DDR RDIMMNote: DIMMs are installed in matched pairs using the following population order: DIMM1-A & DIMM1-B,DIMM2-A & DIMM2-B, DIMM3-A & DIMM3-B, DIMM4-A & DIMM4-B.1. BladeCenter HS40 supports up to 16GB of Chipkill memory via 8 DIMM slots. Removal of standard memory is requiredto achieve the supported maximum amount.2. Due to two-way interleaving, installation of memory options in pairs is required.HS40 Hard Disk Drive (HDD) Storage OptionsHDD OptionsSBBNumberOptionNumberDescription Height BaysSupportedMaximumQuantity 1IDE HDD 248P7099 48P7063 BladeCenter 40GB 5400 rpm ATA-100 HDD Slim 1, 2 2IDE Flash Disk Drives 2, 325K8227 90P3771 BladeCenter 1GB Flash Disk Drive Slim 1.2 225K8228 90P3772 BladeCenter 2GB Flash Disk Drive Slim 1,2 225K8229 90P3773 BladeCenter 4GB Flash Disk Drive Slim 1,2 2Hot-swap Ultra320 HDDs 432P0746 32P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0747 32P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0748 32P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0744 32P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 232P0745 32P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD SL 1, 2 2Internal Storage Expansion 526K4852 26K4847 BladeCenter SCSI Storage Expansion Unit 6- - -1. Each installed HDD will physically prevent installation of one expansion card.2. Integrated mirroring is supported using these HDDs.3. Supported in BladeCenter T blades only (models xTx) and can be mixed with a standard IDE HDD.4. Requires the optional storage expansion unit.5. Either the BladeCenter PCI I/O Expansion Unit or the BladeCenter SCSI Storage Expansion unit can be attached to a single bladeserver, but not both.6. The optional, 1U BladeCenter SCSI Storage Expansion Unit provides two hot-swap SCSI HDD bays, and an integrated single-channelUltra320 storage controller that supports integrated mirroring. The expansion unit connects to the blade server and both units are installedtogether into the BladeCenter chassis.236 Configuration and Options Guide


Refer to the Important Notices section for important noticesHS40 I/O OptionsSBBNumberOptionNumberDescriptionForm FactorBlade Server Expansion Cards 1, 213N2204 13N2203 BladeCenter Fibre Channel Expansion Card -59P6613 48P7061 BladeCenter Fibre Channel Expansion Card -73P9029 73P9030 BladeCenter Gigabit Ethernet Expansion Card -90P3849 90P3777 Intel Gigabit Ethernet Expansion Card -73P5999 73P6000 Myrinet Cluster Expansion Card 3-PCI Expansion 4, 524P0963 24P0960 FC2-133 Host Bus Adapter Half02R0996 02R0988 ServeRAID-6M Controller (256MB Cache) Full02R0995 32P0033 ServeRAID-6M Controller (128MB Cache) Full71P8614 71P8594 Single Channel Ultra320 SCSI Controller Half- 06P3601 10/100 Ethernet Server Adapter Half- 31P9601 PRO/1000 MT Server Ethernet Adapter by Intel Half32P9296 22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half31P6305 31P6301 NetXtreme 1000 T Ethernet Adapter (copper) Half32P9298 31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter (copper) Half13N1675 90P3721 BladeCenter PCI I/O Expansion Unit 61U Rack1. Two identical expansion cards are allowed. Each installed expansion card will physically prevent installation ofone IDE HDD and vice-versa.2. Requires appropriate I/O modules to be installed in the BladeCenter chassis. Refer to ‘BladeCenter I/O Options’for I/O option and configuration information.3. Requires an OPM I/O module to be installed in BladeCenter I/O module bay 4.4. PCI Adapters must be installed in the optional BladeCenter PCI I/O Expansion Unit and provide external connectionsonly.5. Either the BladeCenter PCI I/O Expansion Unit or the BladeCenter SCSI Storage Expansion unit can be attachedto a single blade server, but not both.6. The optional, 1U, BladeCenter PCI I/O Expansion Unit provides two 64-bit/100MHz PCI-X slots. The expansionunit connects to the blade server and both units are installed as a single unit into the BladeCenter chassis.Chapter 27. BladeCenter HS40 237


238 Configuration and Options Guide


Chapter 28. BladeCenter JS20BladeCenter JS20 At-A-GlanceOption Part Number 1Processor/FSB Speed (GHz/MHz) 2Number of Processors (Std/Max)CacheMemory (Std/Max) 3Storage ControllerHDD Bays (Total/Avail)HDD Capacity (Std/Max) 4Onboard Ethernet (Mbps) 5Integrated System Management Processor 6Expansion Cards (Std/Max) 78842-21X 1.6/800 2/2 512KB L2 512MB/4GB Dual ATA-100 2/2 0/80GB 2 x 1GB Y 0/11. 2-way, 1U blade server which installs in a BladeCenter chassis and ships without keyboard and mouse. Up to 14 JS20 bladeservers are supported in the BladeCenter chassis. Power modules in BladeCenter models 1XX will need to be upgraded to1800w power modules in order to support JS20 blade servers.2. PowerPC 970 processors with full-speed L2 cache and 800MHz Front-side Bus (FSB).3. Memory is two-way interleaved, PC2700 ECC DDR RDIMMs supporting Chipkill technology.4. Maximum HDD storage capacity is based on installation of two 40GB 5400rpm IDE HDDs.5. Broadcom dual-port integrated copper gigabit Ethernet controller.6. System management functionality, interconnect network connectivity and console connectivity are managed through thestandard management module. The standard integrated service processor monitors JS20 system management activity, communicatingwith the management module in the BladeCenter.7. Installation of an I/O expansion card prevents installation of a 2nd IDE HDD.JS20 Memory OptionsSBBNumberOptionNumberMemory Description 190P0862 73P2265 256MB PC2700 ECC DDR RDIMM13N1266 73P2275 512MB PC2700 ECC DDR RDIMM13N1267 73P2276 1GB PC2700 ECC DDR RDIMM1. DIMMs are installed in matched pairs using the following population order:DIMM3 & DIMM4, DIMM1 & DIMM2.JS20 Hard Disk Drive (HDD) Storage OptionsSBBNumberOptionNumberDescription Height BaysSupportedMaximumQuantity 1IDE HDD48P7099 48P7063 BladeCenter 40GB 5400rpm ATA-100 HDD Slim 1, 2 21. Up to two IDE HDDs may be installed in each JS20. A second IDE HDD cannot be added if a I/O expansion cardis installed.239


JS20 I/O OptionsSBBNumberOptionNumberDescriptionForm FactorBlade Server Expansion Cards 1, 259P6613 48P7061 BladeCenter Fibre Channel Expansion Card -73P9029 73P9030 BladeCenter Gigabit Ethernet Expansion Card -1. One expansion card is allowed per blade server and installs over IDE HDD bay 2, preventing installation of secondIDE HDD.2. Requires appropriate I/O modules to be installed in the BladeCenter chassis. Refer to ‘BladeCenter Storage andCommunications Expansion’ for appropriate I/O module options and configuration information.240 Configuration and Options Guide


Chapter 29. VMware ESX Server 2.0Virtual machine software for consolidating and partitioning systems in high-performance environments.Option Number 1481722X481724X481728X481726X481739X48173AX48173BXDescriptionVMware ESX Server 2.0 (1-2 processors)VMware ESX Server 2.0 (2-4 processors)VMware ESX Server 2.0 (5-8 processors)VMware ESX Server 2.0 (8-16 processors)VMware ESX Server 2.0 Upgrade (2-4 processors)VMware ESX Server 2.0 Upgrade (4-8 processors)VMware ESX Server 2.0 Upgrade (8-16 processors)1. Orderable only when configured with an xSeries server, not separately.VMware Virtual SMPAdd-on module to VMware ESX Server 2.0 that allows a single virtual machine to span multiple physicalprocessors.Option Number48173CX48173DX48173EX48173FX4817U1X4817U2X4817U3XDescriptionVMware Virtual SMP (2 processors)VMware Virtual SMP (4 processors)VMware Virtual SMP (8 processors)VMware Virtual SMP (16 processors)VMware Virtual SMP Upgrade (2-4 processors)VMware Virtual SMP Upgrade (4-8 processors)VMware Virtual SMP Upgrade (9-16 processors)Server CompatibilityThe following servers are compatible with VMware ESX Server 2.0, VMware ESX Server 2.0 upgrades,VMware Virtual SMP and VMware Virtual SMP upgrades.• xSeries 255• xSeries 335• xSeries 345• xSeries 365• xSeries 445• BladeCenter HS20• BladeCenter HS40• IBM provides support for Windows, Linux and leading applications in a VMware environment.• Differences in system configurations are invisible to operating systems and applications.• Clustering environments can be supported within a single server.• Provides a cost-effective failover solution for mixed OS environments.All options that are compatible with a supported system may not be supported by VMware.For the latest available information, refer to IBM’s website for Option/NOS/Server compatibility. See theinformation Sources section for URL.241


VMware Offerings for BladeCenterThese BladeCenter license packs and media kits enable you to conveniently purchase VMware softwareand product media for a full BladeCenter chassis.Option NumberDescription4817BEV VMware Virtual Infrastructure Node license pack for BladeCenter 14817BE2 VMware ESX Server and VirtualCenter Agent license pack for BladeCenter 24817B12481721X4817MEXVMware ESX Server and VirtualCenter Agent license pack for single bladeVMware ESX Server Media KitVMware VirtualCenter Media KitNote: Except for media kits, these VMware offerings include a one-year software maintenancesubscription service and must be purchased together with a corresponding IBM hardwareproduct.1. Contains licenses for Virtual Infrastructure Nodes for 14 two-way blades.2. Contains VMware ESX Server and VirtualCenter Agent licenses for 14 two-way blades.242 Configuration and Options Guide


Chapter 30. xSeries Network Operating System PreloadsIBM Systems Group offers a range of Microsoft Windows Network Operating Systems (NOS) on mostxSeries servers and IntelliStation workstations as a certified preloaded package that includes optionfirmware. IBM preloads are documented after testing to operate as reliable solutions, providing a simple,cost-effective start-up process.The following chart shows which NOS preloads are available for each xSeries server and IntelliStationworkstation. The second chart shows which options are supported in these preloads for each system(exceptions are footnoted in the first chart).Network Operating System (NOS) Preload 1Windows 2000 Server with Service Pack 3 2HS20 x205 x225 x235 x255 x305 x335 x345 Z Pro 6221X X X X X X X XWindows 2000 Advanced Server with Service Pack 3 2 X X X X X X X XMicrosoft SBS with Service Pack 3 2 X XWindows 2003 Server, Standard Edition 2, 3XXWindows 2003 Server, Enterprise Edition 2, 3 X XWindows XP Professional Edition 4Windows 2000 Professional Edition 2XXNote: IBM Operational Support Services - Support Line provides fee-based direct support to enhance your productivity with voiceand electronic access. Additionally, Support Line will help answer questions pertaining to usage and suspected software defectsfor eligible products.1. Orderable only when configured with an xSeries server or IntelliStation workstation, not separately. Available in select countries. For moreinformation, check with your local IBM representative.2. Language support for US English only.3. System support only. Option support will be added and documented in a later edition.4. Language support includes US English, French, German, Italian, Spanish, Dutch, Danish, Swedish, Finnish and Norwegian.243


Options Supported in NOS PreloadsOption NumberSBB NumberDescriptionHS20x205x225x235x255x305x335x345Z Pro 6221Storage Controllers06P5740 24P3472 ServeRAID-4Lx Ultra160 SCSI Controller X X X X X X X25P3492 32P0022 ServeRAID-5i Controller X X X19K4646 24P2650 PCI Wide Ultra160 SCSI Adapter X X X X X X XFibre Channel Storage Controllers and Options00N6881 24P2334 FAStT Host Adapter X X X X19K1246 19K1311 FAStT FC-2 Host Bus Adapter X X X X24P0960 24P0963 FC2-133 Host Bus Adapter X X X X X48P7061 59P6613 BladeCenter Fibre Channel Expansion Card XNetwork AdaptersEthernet06P3601 25P2889 10/100 Ethernet Server Adapter X X X X X22P4501 24P9559 Intel Pro/100S Desktop Adapter X22P6501 02R3435 Pro/1000 T Desktop Adapter by Intel22P7801 32P9296 NetXtreme 1000 SX Fiber Ethernet Adapter X X X X X X31P6301 31P6305 NetXtreme 1000 T Ethernet Adapter (copper) X31P6401 32P9298 NetXtreme 1000 T Dual Port Ethernet Adapter(copper)Removable Media22P6950 25P5573 16x Max RAM-read DVD-ROM Drive X X X X X22P7047 59P5800 8x Max Slim-line DVD-ROM Drive X X08K9603 32P9070 ThinkPad Removable Diskette Drive05K9233 32P9069 ThinkPad 24x-10x CD-ROM Ultrabay 2000 Drive22P9102 02R2032 ThinkPad Ultralight 8x Max DVD-ROM Ultrabay2000 DriveCommunications33L4618 32P8862 V.90 PCI Data/Fax Modem X X X XTape Drives48P7042 49P3228 20/40GB TR7 Internal IDE Tape Drive X X X00N7991 32P8861 20/40GB DDS/4 4mm Internal Tape Drive X X X X X00N8016 49P3225 100/200GB LTO Tape Drive X X X59P6736 71P9199 160/320GB SDLT Tape Drive X244 Configuration and Options Guide


Chapter 31. IBM and Third Party Software ApplicationsCheck with your IBM representative to verify application software availability for your system.Director v4.2• Basic hardware management including inventory, monitoring, alerting, group management, RAID manager and managementprocessor.• Help Desk and Support including remote control, remote session, file transfer and real-time diagnostics.• Upward integration to Tivoli, CA, HP, MS, SMS, BMC or NetIQ.Director is provided with all xSeries serversDirector for IBM systemsDirector Agent is provided with all xSeries, IntelliStation and NetVista systems.Director for Non-IBM Environments (OEM installations)25K853125K853225K862725K862825K862924R945124R9437Director v4.20 Media Package, Separate Proof of Entitlement requiredServer Plus Pack v4.20, Media Package Only, Separate Proof of Entitlement requiredDirector v4.20 Server: License + 1 year Subscription, Separate Proof of Entitlement onlyDirector v4.20 Agent: License + 1 year Subscription, Separate Proof of Entitlement onlyServer Plus Pack v4.20, License + 1 year Subscription, Separate Proof of Entitlement onlyDirector v4.20 SW Distribution Media Package, Separate Proof of Entitlement requiredDirector v4.20 SW Distribution Premium Edition: License + 1 year Subscription Proof of EntitlementDirector v4.1• Basic hardware management including inventory, monitoring, alerting, group management, RAID manager and managementprocessor.• Help Desk and Support including remote control, remote session, file transfer and real-time diagnostics.• Upward integration to Tivoli, CA, HP, MS, SMS, BMC or Net/Q.Director v4.1 Server (provided with all xSeries servers)Director for IBM systemsDirector v4.1 Agent (provided with all xSeries servers, IntelliStation and NetVista systems)Director for Non-IBM Environments (OEM installations)71P761371P761471P761571P761671P761771P7626Director v4.1 CD with 20 Client LicenseDirector v4.1 Single Server License Proof of EntitlementDirector v4.1 20 Additional Client License Proof of EntitlementDirector v4.1 50 Additional Client License Proof of EntitlementDirector v4.1 100 Additional Client License Proof of EntitlementDirector v4.1 Single Client License Proof of EntitlementServer Plus Pack for xSeries systemsAdvanced predictive tools with self-managing technologies including capacity manager, software rejuvenation,rack manager, system availability and active PC manager.71P761871P761971P762071P762171P7627Director v4.1 xSeries All Server Plus Pack CD Single License Proof of EntitlementDirector v4.1 xSeries All Server Plus Pack 20 additional License Proof of EntitlementDirector v4.1 xSeries All Server Plus Pack 50 additional License Proof of EntitlementDirector v4.1 xSeries All Server Plus Pack 100 additional License Proof of EntitlementDirector v4.1 xSeries All Server Plus Pack Single License Proof of Entitlement245


Remote Deployment ManagerRemote replication of system installations (including blades), including remote unattended system deployment,updating of system and option firmware, and restoration of system HDDs with PowerRestore.4836DMX4836D2X4836DCX4836F1X4836F2X4836FCXRemote Deployment Manager v4.11 Single Managed IBM Server License Proof of EntitlementRemote Deployment Manager v4.11 20 Managed IBM Server License Proof of EntitlementRemote Deployment Manager v4.11 100 Managed IBM Server License Proof of EntitlementRemote Deployment Manager v4.11 Single Managed IBM Workstation License Proof of EntitlementRemote Deployment Manager v4.11 20 Managed IBM Workstation License Proof of EntitlementRemote Deployment Manager v4.11 100 Managed IBM Workstation License Proof of EntitlementSoftware Distribution Premium EditionRemote packaging and distribution of applications from a single console to an end-user or user group.73P856373P858273P856673P856873P8570Software Distribution Premium Edition Media Package + Single Agent License Proof of EntitlementSoftware Distribution Premium Edition Single Agent License Proof of EntitlementSoftware Distribution Premium Edition 20 Agent License Proof of EntitlementSoftware Distribution Premium Edition 50 Agent License Proof of EntitlementSoftware Distribution Premium Edition 100 Agent License Proof of EntitlementApplication Workload ManagerProtection of availability and performance of server workloads, allowing multiple applications to share a serverand management of resource contention.73P860373P860473P860573P860673P8607Application Workload Manager for IBM Director - Media Pack, Single License Proof of EntitlementApplication Workload Manager for IBM Director - Single License Proof of EntitlementApplication Workload Manager for IBM Director - 20 License Proof of EntitlementApplication Workload Manager for IBM Director - 50 License Proof of EntitlementApplication Workload Manager for IBM Director - 100 License Proof of Entitlement246 Configuration and Options Guide


Refer to the Important Notices section for important noticesSteelEye LifeKeeper HA Clustering SoftwareCore LifeKeeper software for popular applications as well as proprietary application recovery kits for applicationhealth monitoring and recovery.24R945924R946024R946124R946324R946424R946524R946624R946724R946824R946924R947024R947124R947224R947324R947424R947524R947624R947724R947824R947924R948024R948124R948224R948324R948424R948524R948624R9487LifeKeeper for mySAP/MAX DB Solution on LinuxLifeKeeper for mySAP/DB2 Solution on LinuxLifeKeeper for Sendmail SAMS Solution on LinuxLifeKeeper for LinuxLifeKeeper Data Replication for LinuxLifeKeeper Data Replication for Linux - WANApache Web Server Module (includes SSL support)Sendmail Module (Open Source Sendmail)Informix ModuleOracle ModuleDB2 WE, EE, EEE, ESE ModuleMySQL ModulePostgreSQL ModuleSybase ModuleNFS Server ModulePrint Services ModuleSamba ModuleNetwork Attached Storage Recovery KitLogical Volume Manager ModuleLifeKeeper for Linux Software Development KitLifeKeeper for LAN-based Exchange SolutionLifeKeeper for WAN-based Exchange SolutionLifeKeeper for WindowsLifeKeeper Data Replication for WindowsMS IIS 5.0 Web Server ModuleSQL Server ModuleDB2 WE, EE, EEE, ESE ModuleOracle 8i & 9i Module24R9488 SteelEye Support Package 124R9489 SteelEye Support Package 224R9490 SteelEye Support Package 324R9491 SteelEye Support Package 424R9492 SteelEye Support Package 5Chapter 31. IBM and Third Party Software Applications 247


ARMTech 2.0 Active Resource Management for WindowsComprehensive solutions for the allocation, management and control of critical system resources such as CPU andmemory.90P035090P029190P029290P029390P0349ARMTech Active Resource Management v2.x for Windows (1 CPU)ARMTech Active Resource Management v2.x for Windows (2 CPU)ARMTech Active Resource Management v2.x for Windows (4 CPU)ARMTech Active Resource Management v2.x for Windows (8 CPU)ARMTech Active Resource Management v2.x for Windows (Media Pack)Note: IBM makes no representations or warranties regarding third-party products or services. Some software may differ from its retailversion (if available) and may not include user manuals or all program functionality. Software license agreements may apply.248 Configuration and Options Guide


Chapter 32. External Storage Expansion Unit OverviewNamePart NumberStorage TypeHDD Bays (Std/Max)Hot-Swap HDD Bays (Y/N)Maximum Storage Capacity (GB)Dimensions (W x D x H)Form FactorMax Cfg WtPower SupplySCSI External Storage Expansion At-A-GlanceEXP400 11733(1RU, 2RX) 2Ultra320LVDS14/14 3Y 2,055.2 445mm x 552mm x 128mm(17.5in x 21.7in x 5in)Rack Drawer(3U) 438kg(85lbs)Dual 500w,Redundant 5Fibre Channel External Expansion At-A-GlanceFAStT200 35421RU FibreChannel10/10 Y 1,468 480mm x 575mm x 131.8mm(18.9in x 22.63in x 5.2in)Rack Drawer (3U)42.3kg(94lbs)Dual 350w,RedundantFAStT200HA35422RU 6FibreChannel10/10 Y 1,468 480mm x 575mm x 131.8mm(18.9in x 22.63in x 5.2in)Rack Drawer (3U)42.3kg(94lbs)Dual 350w,RedundantFAStT100 1724100 7SATA 14/14 Y 3500 481.8mm x 597.4mm x132.3mm (18.97in x 23.52in x5.21in)Rack Drawer (3U)40.2kg(57lbs)Dual 390w,RedundantFAStT600Entry 817226LUFibreChannel14/14 Y 2,055 481.8mm x 597.4mm x132.3mm (18.97in x 23.52in x5.21in)Rack Drawer (3U)41.04kg(90.48lbs)Single 390wFAStTEXP100 9171010U 10SATA 14/14 Y 3,500 481.8mm x 597.4mm x132.3mm (18.97in x 23.52in x5.21in)Rack Drawer (3U)40.2kg(57lbs)Dual 390w,RedundantFAStTEXP50035601RU 11FibreChannel310/10 Y 1,468 447mm x 563mm x 128mm(17.6in x 22.2in x 5in)Rack Drawer (3U)36.1kg(79.6lbs)Dual 350w,RedundantFAStT600 12172260UFibreChannel14/14 Y 2,055.2 481.8mm x 597.4mm x132.3mm(18.97in x 23.52in x 5.21in)Rack Drawer (3U)45.87kg(101.26lbs)Dual 390w,RedundantFAStTEXP70017401RU 13FibreChannel314/14 Y 2,055.2 482mm x 597mm x 132mm(18.97in x 23.52in x 5.21in)Rack Drawer (3U)41.47kg(91.42lbs)Dual 400w,RedundantNote: To attach a SCSI storage enclosure to an xSeries server, an appropriate RAID controller and external cable is required.See Appendix D: Cables - Storage Units - Controllers.1. Includes a single 2m Ultra2 SCSI cable and dual hot-swap 500w redundant power supplies, each with its own power cord.2. EXP400 model 2RX is DC powered.3. EXP400 and FastT EXP700 support slim-line drives only. FAStT EXP500 supports either half-high or slim-line HDDs.4. A rack-to-tower conversion kit option (P/N 09N7296) is available.5. Two 500w power supplies are standard in models 1RU and 1RX only.6. Identical to FAStT200 (P/N 35421RU) with the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).7. FAStT100 ships with the railing mounting kit and two 2.8m/9ft intra-rack power cords (IEC 320-C13 to IEC 320-C14). If U.S. wall-outlet powercords are required, then order quantity two of 94G6667.8. Single RAID controller and single power supply. Upgradeable to FAStT600 or FAStT600 Turbo.9. Attachment to a FAStT600 Storage Server or FAStT900 Storage Server is required. This expansion unit does not attach directly to an xSeries server.See FAStT EXP100 section for more information.10. FAStT EXP100 ships with the rail mounting kit, two 2.8m/9ft intra-rack power cords (IEC 320-C13 to IEC 320-C14), and two U.S. power cords(IEC 320-C13 to NEMA 5-15P).11. Attachment to a FAStT500 Storage Server (P/N 35521RU) or FAStT700 Storage Server (P/N 17421RU) is required. This expansion unit does notattach directly to an xSeries server. See FAStT EXP500 section for more information.12. The FAStT600 can also be purchased with the FAStT600 Turbo Option installed, which significantly increases performance and scalability. Seethe ‘Fibre Channel Solutions Quickview’ for more information.13. Attachment to a FAStT700 Storage Server (P/N 17401RU) is required. This expansion unit does not attach directly to an xSeries server. SeeFAStT EXP700 section for more information.249


250 Configuration and Options Guide


Chapter 33. EXP400 (17331RU)EXP400 Hard Disk Drive (HDD) Storage OptionsPartNumberDescription RPM Height BaysSupported 1MaximumQuantityUltra320 HDDs32P0726 36.4GB 10Krpm Ultra320 SCSI Hot-swap HDD 10000 SL 1 ... 14 14 232P0727 73.4GB 10Krpm Ultra320 SCSI Hot-swap HDD 10000 SL 1 ... 14 14 232P0728 146.8GB 10Krpm Ultra320 SCSI Hot-swap HDD 10000 SL 1 ... 14 14 232P0734 36.4GB 15Krpm Ultra320 SCSI Hot-swap HDD 15000 SL 1 ... 14 14 232P0735 73.4GB 15Krpm Ultra320 SCSI Hot-swap HDD 15000 SL 1 ... 14 14 2Related Options59P5018SCSI Bus Expander and Enclosure Services Module(ESM) 3- -09N7296 Rack-to-Tower Conversion Kit - -1. EXP400 Storage Expansion Unit ships with 14 slim-line hot-swap bays which can be configured as a single bus, two independentbuses or a twintailed single bus.2. Twintailing reduces the maximum number of HDDs on a single bus to 13.3. The optional ESM allows for twintailing and clustering.251


252 Configuration and Options Guide


Chapter 34. Fibre Channel Solutions QuickviewFibre Channel Solutions Quickview At-A-GlancePart NumberDescriptionMax Supported StorageHost Partition (Std/Max)Host Fabric Ports (Std/Max)Max Redundant Host ConnectionsDrive Side Mini Hubs (Std/Max)Redundant Drive Loops (Std/Max)Form FactorFAStT Storage Servers35421RU FAStT200 Storage Server 1.468TB 1 264/64 1/1 - - - 3U35422RU FAStT200 HA Storage Server 8.8TB 3 264/64 2/2 1 - 1/1 3U1724100 FAStT100 Storage Server 14TB 4 5*/16 4/4 2 - 1/1 3U172260U FAStT600 Storage Server (US line cord) 8.221TB 6 */165 4/4 2 - 1/1 3U24P8215 FAStT600 Turbo Storage Server 7 16.442TB817421RU FAStT700 Fibre Channel Storage Server 32.883TB9174290U FAStT900 Storage Server (US line cord) 32.883TB98/64 4/4 2 - 1/1 3U64/64 4/8 4 2/4 1/2 4U64/64 4/8 4 2/4 1/2 4UFibre Channel HDD Expansion Units35601RU FAStT EXP500 Storage Expansion Unit 1.468TB - - - - - 3U17401RU FAStT EXP700 Storage Expansion Unit 2.0552TB - - - - - 3UStorage Server Premium Features24P899725R0051FAStT100 Flash CopyFAStT100 Intel Pack25R0060 FAStT100 Linux/Intel Host Kit 1025R0061 FAStT100 Novell Netware Host Kit 1025R0062 FAStT100 VMware Host Kit 1025R0063 FAStT100 AIX Host Kit 1025R0066 FAStT100 Sun Host Kit 1025R0137 FAStT100 Linux for Power Host Kit 1025R007225R007425R007725R008025R0081FAStT100 4 Storage Partition ActivationFAStT100 8 Storage Partition ActivationFAStT100 16 Storage Partition ActivationFAStT100 4 to 8 Storage Partition UpgradeFAStT100 8 to 16 Storage Partition Upgrade24P8149 FAStT600 1st EXP700 Attach 1124P8151 FAStT600 2nd EXP700 Attach 1224P8066 FAStT600 Two EXP700 Attach 13253


24P8183 FAStT600 3rd EXP700 Attach 1424P8180 FAStT600 Three EXP700 Attach 1524P8067 Intel Pack 1624P8068 FAStT600 Linux/Intel Host Kit10, 1724P8069 FAStT600 Novell NetWare Host Kit10, 1724P8070 10, 17FAStT600 VMware Host Kit24P8072 10, 17FAStT600 AIX Host Kit24P8073 10, 17FAStT600 Sun Host Kit24P8074 10, 17FAStT600 HP-UX Host Kit25R0091 10, 17FAStT600 Linux for Power Host Kit24P8075 FAStT600 4-Storage Partition Activation 1824P815724P822124P8154FAStT600 8-Storage Partition ActivationFAStT600 16-Storage Partition ActivationFAStT600 4 to 8 Storage Partition Upgrade24P8223 FAStT600 8 to 16 Storage Partition Upgrade 1724P8220FAStT600 FlashCopy Activation with Storage Managerv8.424P8216 FAStT600 Turbo Option Upgrade Kit 724P822224P822424P821724P821824P821924P822919K1294FAStT600 Turbo 8 to 64 PartitionsFAStT600 Turbo 16 to 64 Partition UpgradeFAStT600 Turbo FlashCopy ActivationFAStT600 Turbo VolumeCopy ActivationFAStT600 Turbo combined FlashCopy andVolumeCopy ActivationFAStT700 Storage Manager v8.4 UpgradeFAStT700 FlashCopy Activation24P8230 FAStT700 VolumeCopy Activation 1924P823119K1295FAStT700 combined FlashCopy and VolumeCopyActivation 19FAStT700 Remote Mirror Activation24P7981 FAStT900 AIX Host Kit 1024P7982 FAStT900 Sun Host Kit 1024P7983 FAStT900 HP-UX Host Kit 1025R0103 FAStT900 Linux for Power Host Kit 1024P822624P7984FAStT900 Storage Manager v8.4 UpgradeFAStT900 Upgrade from 16 to 64 Storage Partitions24P7985 FAStT900 FlashCopy Activation 1024P8227 FAStT900 VolumeCopy Activation 1924P8228FAStT900 combined FlashCopy and VolumeCopyActivation 1924P7986 FAStT900 Remote Mirror Activation 101Gb Fibre Channel Fabric Components00N6881 FAStT Host Adapter - - - - - - -19K1121 FAStT200 Redundant RAID Controller - - - - - - -254 Configuration and Options Guide


Refer to the Important Notices section for important notices03K9307 FC Long-wave GBIC - - - - - - -03K9308 FC Short-wave GBIC - - - - - - -03K9305 Fibre Channel 25m Cable - - - - - - -03K9306 Fibre Channel 5m Cable - - - - - - -36L9973 Fibre Channel 1m Cable - - - - - - -2Gb Fibre Channel Fabric Components24P0960 FC2-133 Host Bus Adapter - - - - - - -19K1269 FAStT700/900 Mini Hub - - - - - - -2005H08 TotalStorage SAN Fabric Switch Model H08 20 - - - - - - -2005H16 TotalStorage SAN Fabric Switch Model H16 21 - - - - - - -2034212 22, 23McDATA Sphereon 4300 Fabric Switch Model 21222R0046 McDATA Sphereon 4300 4-port FlexPort Expansion 24 - - - - - - -3534F08 TotalStorage SAN Switch F08, 8-port 25 - - - - - - -2109F16 SAN FC Switch, 16-Port 26 - - - - - - -19K1271 Short-wave SFP Module - - - - - - -19K1272 Long-wave SFP Module - - - - - - -22R0047McDATA Long-wave SFP Module19K1247 1m LC-LC Fibre Channel Cable - - - - - - -19K1248 5m LC-LC Fibre Channel Cable - - - - - - -19K1249 25m LC-LC Fibre Channel Cable - - - - - - -19K1250 LC-SC Fibre Channel Adapter Cable 27 - - - - - - -Fibre Channel HDDs19K0653 36.4GB 10K rpm 1Gbps FC Hot-swap HDD - - - - - - -19K0654 73.4GB 10K rpm 1Gbps FC Hot-swap HDD - - - - - - -06P5707 18.2GB 15K rpm 1Gbps FC Hot-swap HDD - - - - - - -06P5761 36.4GB 10K rpm 2Gbps FC Hot-swap HDD - - - - - - -06P5762 73.4GB 10K rpm 2Gbps FC Hot-swap HDD - - - - - - -32P0765 146.8GB 10K rpm 2Gbps FC Hot-swap HDD - - - - - - -06P5771 18.2GB 15K rpm 2Gbps FC Hot-swap HDD - - - - - - -06P5772 36.4GB 15K rpm 2Gbps FC Hot-swap HDD - - - - - - -32P0768 73.4GB 15K rpm 2Gbps FC Hot-swap HDD - - - - - - -1. Attaching expansion units to a FAStT200 Storage Server is not recommended because a single point-of-failure occurs when external storage isconnected through only one RAID controller. The maximum storage value is based on 10 internal 146.8GB internal FC HDDs.2. Existing systems in the field may require a free software download in order to support the number of partitions shown.3. Based on a maximum of 60 146.8GB FC HDDs installed in the redundant storage loop that includes the FAStT200 internal HDD bays and fiveFAStT EXP500 expansion units.4. Based on a maximum of 56 250GB SATA HDDs installed in the redundant storage loop that includes the FAStT100 internal HDD bays and threeFAStT EXP100 expansion units.5. The unit ships with a single Host Default Group.6. Based on a maximum of 56 146.8GB FC HDDs installed in the redundant storage loop that includes the FAStT600 internal HDD bays and threeEXP700 expansion units.7. The FAStT600 Turbo option includes two RAID Blades with 1GB Cache each (2GB total), FAStT Storage Manager v8.4, license to attach 112HDDs through seven EXP700s and license for eight partitions.8. Based on a maximum of 112 146.8GB FC HDDs installed in the redundant storage loop that includes the FAStT600 internal HDD bays and sevenEXP700 expansion units.9. Based on a maximum of 224 146.8GB Fibre Channel HDDs installed in a maximum of 16 FAStT EXP700 expansion units. A maximum of eightexpansion units are supported in a redundant drive loop (cable pair). Four drive-side mini hubs are required to support two loops running inredundant mode.10. Licensed one per controller.11. License to attach 15 to 28 HDDs.12. License to attach 29 to 42 HDDs.13. License kit upgrade to support up to 42 HDDs.14. License to attach 43 to 56 HDDs.15. License to attach up to 56 HDDs.Chapter 34. Fibre Channel Solutions Quickview 255


16. Upgrade to support four partitions and provides the Novell Netware and Linux Host kits.17. This option is available for both FAStT600 and FAStT600 Turbo.18. Upgrade to support four partitions.19. Requires Storage Manager v8.4.20. Additional related options include H08 Remote Switch Activation (P/N 22R0579), H08 Extended Fabric Activation (P/N 22R0549), H08 FullFabric Activation (P/N 22R0552), H08 Performance Bundle Act (P/N 22R0555), H08 Advanced Security Act (P/N 22R0558) and Fabric ManagerV4 Max Domains for H08/H16 (P/N 17P7180).21. Additional related options include H16 Remote Switch Activation (P/N 22R0491), H16 Extended Fabric Activation (P/N 22R0494), H16 FullFabric Activation (P/N 22R0497), H16 Performance Bundle Act (P/N 22R0500), H16 Advanced Security Act (P/N 22R0503) and Fabric ManagerV4 Max Domains for H08/H16 (P/N 17P7180).22. Base model ships with four short-wave SFP modules and be expanded to 12 ports in 4-port increments via the McDATA Sphereon 4300-portFlexPort Expansion Kit.23. Related option is the McData 4300 Full Fabric Capability Activation (P/N 22R0045).24. Expands the McDATA 4300 by four ports. The McDATA 4300 can be expanded up to 12 ports using multiple expansion kits.25. Additional related options include F08 Full Fabric Activation (P/N 18P5060), Performance Bundle Activation (P/N 18P4405), Fabric ManagerVersion 4.0 (F08) (P/N 17P7180) and F08 Advanced Security Activation (P/N 18P4411).26. Additional related options include Remote Switch Activation (P/N 18P3579), Extended Fabric Activation (P/N 18P3580), F16 PerformanceBundle Activation (P/N 18P3590), Fabric Manager Version 4.0 (F16) (P/N 17P7182) and F16 Advanced Security Activation (P/N 18P3596). Powercords for nonrack installation are available by country.27. The LC-SC Fibre Channel Adapter Cable (P/N 19K1250) is designed to connect any 1Gb device or cable to any 2Gb device or cable. When 2Gband 1Gb technology are combined in a configuration, the signal transfer automatically converts to the slower speed.256 Configuration and Options Guide


Chapter 35. FAStT100 Storage ServerFAStT100 Storage Server HDD Storage OptionsOptionNumberDescription Height Bays Supported Max QtyFastT SATA HDDs90P1350 250GB 7200 rpm FAStT SATA HDD SL 1 ... 14 14External Storage Expansion UnitsForm Factor171010U FAStT EXP100 Storage Expansion Unit Rack (3U)FAStTEXP100 HDD Storage OptionsOptionNumberDescription Height Bays Supported Max QtyFastT SATA HDDs90P1350 250GB 7200 rpm FAStT SATA HDD SL 1 ... 14 14257


258 Configuration and Options Guide


Chapter 36. FAStT200 Storage Server (3542xRU)This table does not represent all valid HDD configurations.PartNumberDescription RPM Height BaysSupportedMaximumQuantity19K065319K065406P5707Netfinity 36.4GB 10K-4 FC Hot-SwapHDDNetfinity 73.4GB 10K-4 FC Hot-SwapHDDNetfinity 18.2GB 15Krpm FC Hot-SwapHDD10,000 SL 1 ... 10 1010,000 HH 1 ... 10 1015,000 SL 1 ... 10 1006P5761 2Gbps FC 36.4GB/10K Drive 10,000 SL 1 ... 10 1006P5762 2Gbps FC 73.4GB/10K Drive 10,000 SL 1 ... 10 1032P0765146.8GB Fibre Channel Disk DriveModule10,000 SL 1 ... 10 1006P5771 2Gbps FC 18.2GB/15K Drive 15,000 SL 1 ... 10 1006P5772 2Gbps FC 36.4GB/15K Drive 15,000 SL 1 ... 10 1032P0768 73.4GB/15K Disk Module 15000 SL 1 ... 10 10External Storage Expansion Units35421RU FAStT200 Storage Server 1, 2Form FactorRack (3U)35422RU FAStT200 HA Storage Server1 Rack (3U)19K1121 FAStT200 Redundant RAID Controller -1. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own powercord.2. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller(P/N 19K1121).FAStT200 Storage Server LegendA and BGFibre Channel ControllersGBICE Ethernet 1INOUThost connectionexpansion connection1. GBICs are not included. Either Fibre Channel Long orShort-wave GBICs (P/N 03K9307 or 03K9308 respectively)may be used.259


GFC HDDOUTINGEEGINABOUTFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFAStT200 Storage Server 1 (35421RU 2 /35422RU)Fibre/Fibre Configuration Examples (FAStT200)GThe following sample configurations are for illustration only and may not be suitable for any specificcustomer installation. Contact your IBM Business Partner or IBM Marketing Representative for assistancewith your specific configuration requirements.Fibre Configuration LegendPSprimary pathsecondary (redundant) pathShaded boxes represent separate hosts.Cable groups are represented by letters.Maximum of 60 external storage HDDs are supported for optimum performance (up to 10 in the storageserver with the remainder in expansion units).The number of servers that can be used in configurations with managed hubs or Fibre Channel switches aredependent on partitioning restrictions of the management system or cluster software.An optional short- or long-wave GBIC is required for all FAStT200 storage server and FAStT EXP500storage connections. GBICs are not depicted in these diagrams. See device drawings at the end of thissection for details.Other Fibre Channel devices may not require optional GBICs. For specific requirements, see the FibreDevice Ports Reference.260 Configuration and Options Guide1. Housed in a 19in rack-mountable drawer and ships standard with redundant power supplies and two power cablesrequiring separate power sources. Requires an IBM industry standard 19in rack, EIA-310D with a minimum depth of 24in(711.2mm). External Storage Expansion Units require storage controllers and external cables. Select a supported controllerfrom the system configurator and cables from Appendix Cables-Storage Units-Controllers.2. 35421RU includes a single loop only. The second loop is available with the addition of FAStT200 Redundant RAIDController (P/N 19K1121).


Refer to the Important Notices section for important notices1.FAStT HostAdapterD1FAStT200 Storage Server(P/N 35421RU)2.FAStT HostAdapterFAStT HostAdapterD1D1FAStT200 HA Storage Server(P/N 35422RU)D1PFAStT EXP500D1SFAStT HostAdapterD1D1FAStT200 HA Storage Server(P/N 35422RU)FAStT EXP5003.FAStT HostAdapterESwitch/HubSwitch/Hub 2D1 or ED1 or ED1PD1PFAStT EXP500D1SSFAStT HostAdapterD1Switch/HubFAStT HostAdapterD1D1 or EFAStT200 HA Storage Server(P/N 35422RU)FAStT EXP5004.FAStT HostAdapterFAStT HostAdapterD1Switch/HubD1 or ED1D1PPFAStT EXP500D1SSNote: FAStT Host Adapter (P/N 00N6881) supports short-wave connections only.Note: Buffering the long-wave optic cable expanse with a second switch or hub at the remote storagelocation is required to requalify the signal. A managed hub supports only one long-wave GBIC.Refer to the following Supported Cable Groups chart for cable type definitions.Chapter 36. FAStT200 Storage Server (3542xRU) 261


Supported Cable GroupsCable Group A (0.8mm to 0.8mm)03K931003K9311Netfinity 2m Ultra2 SCSI CableNetfinity 4.2m Ultra2 SCSI CableCable Group D (short-wave Fibre Channel_Group D1 - 1Gb (SC-SC) short-wave Fibre Channel cables36L997303K930603K9305Netfinity Fibre Channel 1m CableNetfinity Fibre Channel 5m CableNetfinity Fibre Channel 25m CableGroup D2 - 2Gb (LC-LC) short-wave Fibre Channel cables19K124719K124819K12491m LC-LC Fibre Channel Cable5m LC-LC Fibre Channel Cable25m LC-LC Fibre Channel CableCustomer-supplied short-wave cable of up to 500m (0.31 miles)Cable Group E (long-wave Fibre ChannelCustomer-supplied long-wave cable of up to 10km (6.2 miles)Fibre Channel connectors1Gb (SC-SC) GBICs03K930803K9307Netfinity Fibre Channel Short-wave GBICNetfinity Fibre Channel Long-wave GBIC2Gb (LC-LC) SFP Modules19K127119K1272Short-wave SFP ModuleLong-wave SFP Module2Gb to 1Gb (LC-SC) adapter19K1250LC-SC Fibre Channel Adapter Cable262 Configuration and Options Guide


Chapter 37. FAStT EXP500 (35601RU)PartNumberDescription RPM Height BaysSupportedMaximumQuantity19K0653 Netfinity 36.4GB 10K-4 FC Hot-Swap HDD 10,000 SL 1 ... 10 1019K0654 Netfinity 73.4GB 10K-4 FC Hot-Swap HDD 10,000 HH 1 ... 10 1006P5707Netfinity 18.2GB 15Krpm FC Hot-SwapHDD15,000 SL 1 ... 10 1006P5761 2Gbps FC 36.4GB/10K Drive 10,000 SL 1 ... 10 1006P5762 2Gbps FC 73.4GB/10K Drive 10,000 SL 1 ... 10 1032P0765 146.8GB Fibre Channel Disk Drive Module 10,000 SL 1 ... 10 1006P5771 2Gbps FC 18.2GB/15K Drive 15,000 SL 1 ... 10 1006P5772 2Gbps FC 36.4GB/15K Drive 15,000 SL 1 ... 10 1032P0768 73.4GB/15K Disk Module 15,000 SL 1 ... 10 10External Storage Expansion Units35601RU FAStT EXP500 Storage Expansion Unit 1Form FactorRack (3U)1. The FAStT EXP500 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its ownpower cord.FAStT EXP500 LegendINOUTprimary or secondary (redundant) connection from FAStT500 StorageServer or previous FAStT EXP500 expansion unit daisy-chained fromthe storage serverprimary or secondary (redundant) connection to additional FAStTEXP500 expansion units263


35601RUFibre ChannelConnectorsOUTIN OUT INExternal: Fibre ChannelInternal: Fibre ChannelAuto TerminationLoop ABay 1Bay 2Bay 3Bay 4Bay 5Bay 6Bay 7Bay 8Bay 9Bay 10Loop BFAStT EXP500 1, 2Fibre/Fibre Configuration ExamplesThe following sample configurations are for illustration only and may not be suitable for any specificcustomer installation. Contact your IBM Business Partner or IBM Marketing Representative for assistancewith your specific configuration requirements.Fibre Configuration LegendPSprimary pathsecondary (redundant) pathShaded boxes represent separate hosts.Cable groups are represented by letters.Maximum of 220 external storage HDDs are supported through a maximum of 11 enclosures in eachchannel pair (22 enclosures total).The number of servers that can be used in configurations with managed hubs or Fibre Channel switches aredependent on partitioning restrictions of the management system or cluster software.An optional short- or long-wave GBIC is required for all FAStT500 EXP500 storage connections. FAStT700and 2Gb FC switch connections require SFP Modules. LC-SC FC Adapter Cables are required to connectLC-LC FC cables to GBICs in FAStT EXP500 connections. GBICs, SFP Modules and adapter cables are notdepicted in these diagrams. See device drawings at the end of this section for details.For specific requirements concerning connections, refer to the Fibre Device Ports Reference or FibreInterconnection Guidelines.264 Configuration and Options Guide1. Housed in a 19in rack mountable drawer and ships standard with redundant power supplies and two power cablesrequiring separate power sources. Requires an IBM industry standard 19in rack, EIA-310D with a minimum depth of 24in(711.2mm). Select optional storage controllers and external cables, which are not included with the FAStT storage server orexternal enclosure, using the Fibre Channel Device Ports Reference.2. GBICs are not included. Either Fibre Channel long or short-wave GBICs (P/N 03K9307 or 03K9308 respectively) may beused.


Refer to the Important Notices section for important notices1.FAStT FC-2 HostBus Adapter 1FAStT FC-2 HostBus Adapter 1D2D2FAStT700 Storage Server(P/N 17421RU)D1 or D2 2PFAStT EXP500S2.3.4.FAStT FC-2 HostBus Adapter 1FAStT FC-2 HostBus Adapter 1FAStT FC-2 HostBus Adapter 1FAStT FC-2 HostBus Adapter 1FAStT FC-2 HostBus Adapter 1FAStT FC-2 HostBus Adapter 1D2D2ED2D2D2SAN FC Switch 16-port(2109F16)D2 or ESAN FC Switch(2109F16) 3D2SAN FC Switch(2109F16)D2 or ED2 or EFAStT700 Storage Server(P/N 17421RU)FAStT700 Storage Server(P/N 17421RU)FAStT700 Storage Server(P/N 17421RU)D1 or D2 2D1 or D2 2PD1 or D2 2D1 or D2 2PPD1 or D2 2D1 or D2 2PPPD1 or D2 2FAStT EXP500FAStT EXP500FAStT EXP500FAStT EXP500FAStT EXP500FAStT EXP500D1D1D1SSSSSSFAStT EXP500 with FAStT700 Fibre Channel Storage ServerNote: FAStT FC-2 Host Bus Adapter (P/N 24P0960) includes an integrated short-wave SFF Module,supporting short-wave connections only.Note: Fibre Channel connections to the FAStT EXP500 require GBICs. LC-LC Fibre Channel cable does notconnect directly into a GBIC. LC-SC Fibre Channel Adapter Cable (P/N 19K1250) is required. Use SC FibreChannel cable for daisy-chaining FAStT EXP500 units (see the Supported Cable Groups chart for a list of SCcables).Note: Buffering the long-wave optic cable expanse with a second switch or hub at the remote storagelocation is required to requalify the signal.Refer to the Supported Cable Groups chart following the FAStT 200 configuration examples for cable typedefinitions.Chapter 37. FAStT EXP500 (35601RU) 265


266 Configuration and Options Guide


Chapter 38. FAStT600 Storage ServerPartNumberDescription RPM Height BaysSupportedMaximumQuantity06P5761 2Gbps FC 36.4GB/10K Drive 10,000 SL 1 ... 14 1406P5762 2Gbps FC 73.4GB/10K Drive 10,000 SL 1 ... 14 1432P0765 146.8GB Fibre Channel Disk Drive Module 10,000 SL 1 ... 14 1406P5771 2Gbps FC 18.2GB/15K Drive 15,000 SL 1 ... 14 1406P5772 2Gbps FC 36.4GB/15K Drive 15,000 SL 1 ... 14 1432P0768 73.4GB/15K Disk Module 15,000 SL 1 ... 14 14External Storage Expansion UnitsForm Factor172260U FAStT600 Storage Server (US line cord) Rack (3U)171010U FAStT EXP100 Storage Expansion Unit Rack (3U)17401RU FAStT EXP700 Storage Expansion Unit Rack (3U)FAStT 600 Storage Server LegendA and BFibre Channel controllersE Ethernet 1INOUThost connectionexpansion connection1. SFP modules are not included. Either FibreChannel Long- or Short-wave SFP modules (P/N19K1272 or 19K1271 respectively) may be used.267


SFPSFPSFPSFPSFPSFPOUTINEEAOUTIN BFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFC HDDFAStT 600 Storage Server 1 (172260U)Fibre Channel Configuration Examples (FAStT600)The following sample configurations are for illustration only and may not be suitable for any specificcustomer installation. Contact your IBM Business Partner or IBM Marketing Representative for assistancewith your specific configuration requirements.Fibre Channel Configuration LegendPSprimary pathsecondary pathShaded boxes represent separate hostsCable groups are represented by letters.Maximum of 42 Fibre Channel HDDs are supported by the FAStT600 Storage Server for optimumperformance (up to 14 in storage server with remainder in expansion units).An optional short- or long-wave SFP Module is required for all FAStT600 storage server and FAStT EXP700storage connections. SFP Modules are not depicted in these diagrams. See device drawings at the end ofthis section for details.268 Configuration and Options Guide1.Housed in a 19in rack-mountable drawer and ships standard with redundant power supplies and two power cablesrequiring separate power sources. Requires an IBM industry standard 19in rack, EIA-310D with a minimum depth of 24in(711.2mm).


Refer to the Important Notices section for important noticesDirect Attachment1.FAStT FC-2 HostBus Adapter 1FAStT600 Storage Server(P/N 172260U)FAStT FC-2 HostBus Adapter 1D2D2High-availability Without Switch2.FASt FC-2 HostBus Adapter 1D2FASt FC-2 HostBus Adapter 1FAStT600 Storage Server(P/N 172260U)FAStT EXP700D2FASt FC-2 HostP SFAStT EXP700Bus Adapter 1D2D2FASt FC-2 HostD2Bus Adapter 1 D2High-availability With Switch3.FASt FC-2 HostBus Adapter 1D2SwitchFASt FC-2 HostBus Adapter 1FAStT600 Storage Server(P/N 172260U)FAStT EXP700D2FASt FC-2 HostBus Adapter 1SwitchD2 or ED2 or EPPFAStT EXP700SFASt FC-2 HostBus Adapter 1D2D2 or ED2 or ESNote: FAStT FC2 Host Bus Adapter (P/N 24P0960) supports short-wave connections only.Refer to the Supported Cable Groups chart following the FAStT 200 configuration examples for cable typedefinitions.Chapter 38. FAStT600 Storage Server 269


270 Configuration and Options Guide


Chapter 39. FAStT EXP700 (17401RU)PartNumberDescription RPM Height BaysSupportedMaximumQuantity06P5761 2Gbps FC 36.4GB/10K Drive 10,000 SL 1 ... 14 1406P5762 2Gbps FC 73.4GB/10K Drive 10,000 SL 1 ... 14 1432P0765 146.8GB Fibre Channel Disk Drive Module 10,000 SL 1 ... 14 1406P5771 2Gbps FC 18.2GB/15K Drive 15,000 SL 1 ... 14 1406P5772 2Gbps FC 36.4GB/15K Drive 15,000 SL 1 ... 14 1432P0768 73.4GB/15K Disk Module 15,000 SL 1 ... 14 14External Storage Expansion Units17401RU FAStT EXP700 Storage Expansion Unit 1Form FactorRack (3U)1. The FAStT EXP700 includes two hot-swap, 400w auto-ranging redundant power supplies, each with its ownpower cord.FAStT EXP700 LegendINOUTprimary or secondary (redundant) connection from FAStT700 Storage Serveror previous FAStT EXP700 expansion unit daisy-chained from the storageserverprimary or secondary (redundant) connection to additional FAStT EXP700expansion units271


Fibre ChannelConnectorsOutInOutInLoop ABay 1Bay 2Bay 3Bay 4Bay 5Bay 6Bay 7Bay 8Bay 9Bay 10Bay 11Bay 12Bay 13Bay 14Loop BFAStT EXP700 1 (17401RU)Note: SFP Modules are not included. Either Fibre Channel long or short-wave SFP Modules(P/N 19K1272 or 19K1271 respectively) may be used.Fibre/Fibre Configuration ExamplesThe following sample configurations are for illustration only and may not be suitable for any specificcustomer installation. Contact your IBM Business Partner or IBM Marketing Representative for assistancewith your specific configuration requirements.Fibre Configuration LegendPSprimary pathsecondary pathShaded boxes represent separate hosts.Cable groups are represented by letters.A maximum of 224 external storage HDDs are supported through a maximum of eight enclosures in aredundant loop (cable pair). The maximum number of enclosures supported is 16. A maximum of twoloops running in redundant mode are supported with four drive-side mini hubs.The number of servers that can be used in configurations with managed hubs or Fibre Channel switches aredependent on partitioning restrictions of the management system or cluster software.272 Configuration and Options Guide1. Housed in a 19in rack-mountable drawer and ships standard with redundant power supplies and two power cablesrequiring separate power sources. Requires an IBM industry standard 19in rack, EIA-310D with a minimum depth of 24in(711.2mm). Select optional storage controllers and external cables, which are not included with the FAStT storage server orexternal enclosure, using the Fibre Device Ports Reference.


Refer to the Important Notices section for important noticesAn optional short- or long-wave SFP Module is required for all FAStT EXP700 storage connections.FAStT700 and 2Gb Fibre Channel switch connections require SFP Modules. SFP Modules and adaptercables are not depicted in these diagrams. See device drawings at the end of this section for details.For specific requirements concerning connections, refer to the Fibre Device Ports Reference or FibreInterconnection Guidelines.1.FC2-133 HostBus Adapter 1FC2-133 HostBus Adapter 1D2D2FAStT700 Storage Server(P/N 17421RU)PD2FAStT EXP700SD22.FC2-133 HostBus Adapter 1D2SAN FC Switch 16-port(2109F16)D2 or EFAStT700 Storage Server(P/N 17421RU)PD2D2FAStT EXP700S3.FC2-133 HostBus Adapter 1D2ESAN FC Switch(2109F16) 2FAStT700 Storage Server(P/N 17421RU)PD2PFAStT EXP700FAStT EXP700SD2D2SFC2-133 HostBus Adapter 1FC2-133 HostBus Adapter 1D2D2SAN FC Switch(2109F16)D2 or EFAStT700 Storage Server(P/N 17421RU)PD2PFAStT EXP700FAStT EXP700S4.FC2-133 HostBus Adapter 1PFAStT EXP700SFC2-133 HostBus Adapter 1D2D2 or ED2SFAStT EXP700 with FAStT700 Fibre Channel Storage ServerNote: FC2-133 Host Bus Adapter (P/N 24P0960) includes an integrated short-wave SFF Module,supporting short-wave connections only.Note: Buffering the long-wave optic cable expanse with a second switch or hub at the remote storagelocation is required to requalify the signal.Refer to the Supported Cable Groups chart following the FAStT 200 configuration examples for cable typedefinitions.Chapter 39. FAStT EXP700 (17401RU) 273


1.FC2-133 HostBus Adapter 1FC2-133 HostBus Adapter 1D2D2FAStT900 Storage Server(P/N 174290U)PD2FAStT EXP700SD22.FC2-133 HostBus Adapter 1D2SAN FC Switch 16-port(P/N 2109F16)D2 or EFAStT900 Storage Server(P/N 174290U)PD2D2FAStT EXP700S3.FC2-133 HostBus Adapter 1D2ESAN FC Switch 16-port(P/N 2109F16) 2FAStT900 Storage Server(P/N 174290U)PD2PFAStT EXP700FAStT EXP700SD2D2SFC2-133 HostBus Adapter 1FC2-133 HostBus Adapter 1D2D2D2 or ESAN FC Switch 16-port(P/N 2109F16)FAStT900 Storage Server(P/N 174290U)PD2PFAStT EXP700FAStT EXP700S4.FC2-133 HostBus Adapter 1PFAStT EXP700SFC2-133 HostBus Adapter 1D2D2 or ED2SFAStT EXP700 with FAStT900 Fibre Channel Storage ServerNote: FC2-133 Host Bus Adapter (P/N 24P0960) includes an integrated short-wave SFF Module,supporting short-wave connections only.Note: Buffering the long-wave optic cable expanse with a second switch or hub at the remote storagelocation is required to requalify the signal.Refer to the Supported Cable Groups chart following the FAStT 200 configuration examples for cable typedefinitions.274 Configuration and Options Guide


Chapter 40. Fibre Interconnection GuidelinesLegend:• S = Short-wave connection only. See Fibre Device Ports Reference section for GBIC, SFP module orintegrated optical port information.• E = Either short-wave or long-wave connections allowed via the appropriate GBIC or SFP module. SeeFibre Device Ports Reference section for GBIC, SFP module or integrated optical port information.• H = Hardware connection: One of these devices installs directly into the other, e.g., the FAStT500 MiniHub (P/N 00N6882) installs directly into the FAStT500 Storage Server (P/N 35521RU) to provideGBIC availability.Option NUmberDescription00N6881 FAStT Host Adapter00N6882 FAStT500 Mini Hub 124P0960 FC2-133 Host Bus Adapter1724100 FAStT100 Storage Server 219K1121 FAStT200 Redundant Raid Controller 135421RU FAStT200 HA Storage Server 135422RU FAStT200 HA Storage Server 11172260U FAStT600 Storage Server (US line cord) 2171010U FAStT EXP100 235601RU FAStT EXP500 12005H08 TotalStorage SAN Fabric Switch Model H082005H16 TotalStorage SAN Fabric Switch Model H162034212 McData Sphereon 4300 Fabric Switch Model 2123534F08 TotalStorage SAN Switch F08 8-Port 22109F16 SAN Fibre Channel Switch, 16-port 217421RU FAStT700 FC Storage Server19K1269 FAStT Mini Hub 217401RU FAStT EXP700 2174290U FAStT900 Fibre Channel Storage Server 219K1250 LC-SC Fibre Channel Adapter Cable 300N6881 FAStT Host Adapter - S - S S S S S 4 - - S S E S 5 S 5 S 5 S 5 - S 5 H24P0960 FC2-133 Host Bus Adapter - S 4 - S S 4 S 4 S 4 S - - S S E S S S S - S H2005H082005H16TotalStorage SAN Fabric S E S E - E E E - - E E - E E E - - E HSwitch Model H08 2TotalStorage SAN Fabric S E S E - E E E - - E E - E E E - - E HSwitch Model H16 22034212 McDATA Sphereon 4300Fabric Switch Model 21 2 E E E E - E E E - E - - E - - E E - E H3534F082109F16SAN Fibre Channel Switch, S 5 E 4 S E - E 4 E 4 E - - E E - E E E E - E H8-port 2SAN Fibre Channel Switch, S 5 E 4 S E - E 4 E 4 E - - E E - E E E E - E H16-Port 21724100 FAStT100 Storage Server 2 S - S - - - - - E - E E E E E - - - - H35421RU FAStT200 Storage Server 1 S - S 4 - H - - - - E E E E E E - - E - H35422RU19K1121172260UFAStT200 HA Storage S - S 4 - - - - - - E E E E E E - - E - HServer 1FAStT200 Redundant RAID S - S 4 - - H - - - E - - E - - - - - - HController 1FAStT600 Storage Server (US S 4 - S - - - - - E - E E E E E - - E - Hline cord) 2171010U FAStT EXP100 2 - - - E - - - E E - - - - - - - - - E H35601RUFAStT EXP500 Storage - E - - E E E - - - - - E - - E 5 E 5 - E 4 HExpansion Unit 1275


17421RUFAStT700 Fibre Channel S 4 - S - - - - - - E 4 E E E E E - H E - HStorage Server 219K1269 FAStT700 Mini Hub 2 S 4 - S - - - - - - E 4 E E E E E H - E H H17401RU174290UFAStT EXP700 Storage - - S - - - - E - - - - E - - E E - E -Expansion Unit 2FAStT900 Storage Server (US S 4 - S - - - - - E E 4 E E E E E - H E - Hline cord) 303K9307 FC Long-wave GBIC - H - - H H H - - H - - - - - - - - - H03K9308 FC Short-wave GBIC - H - - H H H - - H - - - - - - - - - H19K1250LC-SC Fibre Channel H H H H H H H H H H H H - H H H H H H -Adapter Cable 319K1271 Short-wave SFP Module - - - H - - - H H - H H - H H H H H H H19K1272 Long-wave SFP Module - - - H - - - H H - H H - H H H H H H H48P7062BladeCenter 2-port Fibre - E - E E E E E E - E E E - - E E - E HChannel Switch Module 61. This device requires the use of GBICs. Purchase of GBICs may be needed in order to make connections to this device. See the Fibre Device PortsReference section for GBIC or integrated optical port information.2. This device requires a long or short-wave SFP module. See Fibre Device Ports Reference for additional information.3. The LC-SC Fibre Channel Adapter Cable (P/N 19K1250) is designed to connect any 1Gb device or cable to any 2Gb device or cable. When 2Gband 1Gb technology are combined in a configuration, the signal transfer automatically converts to the slower speed.4. When connected to 1Gb devices or cable, LC-SC Fibre Channel Adapter Cable (P/N 19K1250) is required.5. When connected to 2Gb devices or cable, LC-SC Fibre Channel Adapter Cable (P/N 19K1250) is required.6. Compatible only with BladeCenter. Supports two SFP modules (either short- or long-wave).276 Configuration and Options Guide


Refer to the Important Notices section for important noticesFibre Device Ports ReferencePartNumberDescriptionPorts(Std/Max) 1, 2GBICs or SFPModulesIncluded 3Mini Hubs(Std/Max)00N6881 FAStT Host Adapter 1 - -03K9307 FC Long-wave GBIC 1 - -03K9308 FC Short-wave GBIC 1 - -19K1121 FAStT200 Redundant RAID Controller 2 - -2005H08TotalStorage SAN Fabric SwitchModel H084/8 4 4-2005H16TotalStorage SAN Fabric SwitchModel H168/16 8 5-2034212 McDATA Sphereon 4300 FabricSwitch Model 2124/12 64 4 -3534F08 TotalStorage SAN Switch F08, 8-port 8 4 4 -2109F16 SAN FC Switch, 16-Port 16 8 5 -35421RU FAStT200 Storage Server 2/4 7- -35422RU FAStT200 HA Storage Server 4/4 7 - -1724100 FAStT100 Storage Server 6/6 7 - -171010U FAStT EXP100 4 7 - -172260UFAStT600 Storage Server (US linecord)6/6 7 - -35601RU FAStT EXP500 Storage Expansion Unit 4 - -24P0960 FC2-133 Host Bus Adapter 1 - -17421RU FAStT700 FC Storage Server 86/12 7, 9- 4/819K1269 FAStT700 Mini Hub 3 2 - -17401RU FAStT EXP700 Storage Expansion Unit 4 - -174290UFAStT900 Storage Server (US linecord) 106/127, 9 - 4/819K1250 LC-SC FC Adapter Cable 11 1 - -19K1271 Short-wave SFP Module 1 - -19K1272 Long-wave SFP Module 1 - -48P7062BladeCenter 2-port Fibre Channel2 - -Switch Module 12Note: Refer to the Fibre Channel Solutions Quickview section for additional related options.1. Standard GBICs, SFP Modules and integrated optical ports are short-wave.2. Standard ports represents number of usable ports not requiring additional hardware. Maximum numberof ports may require additional GBICs, SFPs and/or mini-hubs.3. Each FAStT700 Mini Hub provides two SFP Module ports. The host-side mini hubs connect to one of twoFibre Channel controllers in the FAStT700 or FAStT900 Storage Servers. The drive side mini hubs each connectto both Fibre Channel controllers. Full redundancy requires connection to two drive-side and two hostsidemini hubs. Drive-side mini hubs support connection to one port only.4. Four short-wave SFP modules are standard. Either short-wave or long-wave modules can populate the otherfour ports.5. Eight short-wave SFP modules are standard. Either short-wave or long-wave modules can populate theother eight ports.6. Twelve ports require two optional McDATA Sphereon 4300 FlexPort 4-port Expansion kits.7. Quantity shown for storage servers includes both host-side and drive-side ports.8. FAStT700 Storage Server supports up to eight nonredundant or four redundant host connections and tworedundant storage drive loops.9. Each mini-hub has two ports. However, when installed on drive-side, only one port is used.10. FAStT900 Storage Server supports up to eight nonredundant or four redundant host connections and tworedundant storage drive loops.Chapter 40. Fibre Interconnection Guidelines 277


11. The LC-SC Fibre Channel Adapter Cable (P/N 19K1250) is designed to connect any 1Gb device or cableto any 2Gb device or cable. When 2Gb and 1Gb technology are combined in a configuration, the signal transferautomatically converts to the slower speed.12. Compatible only with BladeCenter. Supports two SFP modules (either short- or long-wave).FAStT Host Adapter (P/N 00N6881)FAStT HostAdapter• PCI to FCAL 64/32-bit host adapter.• Compatible with Cable Group D1.• Integrated short-wave optical port, no GBIC required.• Full Fibre Channel fabric support.FAStT EXP500 Storage Expansion Unit (P/N 35601RU)GBIC portsHot-swapfanHot-swappower suppliesHot-swapfan• Two hot-swap, 350w auto-ranging, redundant power supplies.• Redundant fans - two hot-swap, dual-fan units.• LED indicators on all critical components warn of faults, over-temperature, and other abnormalities.• Ten drive bays - supports slim-high or half-high Fibre Channel hot-swap HDDs.• Height is 3U (1U = 1.75in or 44.45mm).• Requires optional GBICs for each connection. GBICs not included.FC2-133 Host Bus Adapter (P/N 24P0960)FC2-133 Host BusAdapter• PCI-X to FCAL 64-bit host adapter (133Mhz).• Supported Attachments (use LC-LC cable in group D2): FAStT700 Storage Server (P/N 17421RU).• Integrated short-wave optical port, no SFP Module required.• Full Fibre Channel fabric support.FAStT700 Storage Server (P/N 17421RU)Mini hubExpansion bays foradditional mini hubsMini hubSFPModuleportsSFPModuleportsPower supplies• Dual high-performance RAID controller cards — supports up to 390MB/sec of throughput.• Operates at 1Gb or 2Gb (autosensing).• Dual 175w auto-ranging, hot-swap redundant power supplies.• Attach directly to FC2-133 Host Bus Adapter (P/N 24P0960) with short-wave cables and SFP Modulesor indirectly through either the 8-port or 16-port 2Gb Fibre Channel Switch (P/N 3534F08, 2109F16)using cables from cable group D2 or E with corresponding SFP Modules.• Height is 4U (1U = 1.75in or 44.45mm).278 Configuration and Options Guide


Refer to the Important Notices section for important notices• For optimum performance no more than two FAStT700 Storage Servers (P/N 17421RU) should beattached to a a single Fibre Channel switch.• Includes four FAStT700 Mini Hubs (P/N 19K1269), two host-side and two storage drive-side.• Each controller is equipped with 1GB of cache (2GB total).• All connections to FAStT700 Mini Hubs require the use of SFP Modules, which are not included.FAStT700 MIni Hub (P/N 19K1269)SFP Module portsSFP Module• Provides additional connections to the FAStT Storage Server — supports complex clustering oradvanced storage applications.• All connections to FAStT700 Mini Hubs require the use of SFP Modules. SFP Modules are notincluded.FAStT EXP700 Storage Expansion Unit (P/N 17401RU)SFP ModuleportsHot-swapfanHot-swappower suppliesHot-swapfan• Two hot-swap, 400w auto-ranging, redundant power supplies.• Redundant fans - two hot-swap, dual-fan units.• LED indicators on all critical components warn of faults, over-temperature, and other abnormalities.• Fourteen drive bays - supports slim-high Fibre Channel hot-swap HDDs.• Height is 3U (1U = 1.75in or 44.45mm).• Requires optional SFP Modules for each connection. SFP Modules not included.FAStT200 Storage Server (P/N 35421RU)GBIC port 10/100 Ethernet port RS-232Hot-swap fanHot-swappowerGBIC portHot-swap fan• Contains a single hot-plug RAID controller which provides a single host Fibre Channel arbitrated loopand a single storage Fibre Channel arbitrated loop.• Can be upgraded to a FAStT200 HA Storage Server through the addition of a FAStT200 RedundantRAID Controller (P/N 19K1121).• Integrated 10/100Mbps Ethernet connector and RS-232 service support port.• Two hot-swap 350W auto-ranging, redundant power supplies.• Redundant fans: two hot-swap, dual-fan units.• LED indicators on all critical components warn of faults, over-temperature, and other abnormalities.• Ten drive bays - supports slim-line or half-high Fibre Channel hot-swap HDDs.• Height is 3U (1U=1.75in or 44.45mm).• Supports long- and short-wave connections. Requires optional GBICs for each connection. GBICs notincluded.Chapter 40. Fibre Interconnection Guidelines 279


FAStT200 HA Storage Server (P/N 35422RU)GBIC Port10/100 Ethernet PortRS-232Hot-swap Fan Hot-swap Power Hot-swap FanGBIC Port• Contains two hot-plug RAID controllers. Each controller provides a single host Fibre Channelarbitrated loop and a single storage Fibre Channel arbitrated loop.• Integrated 10/100Mbps Ethernet connector and RS-232 service support port.• Performance optimized for 60 HDDs - supports optional FAStT EXP500 Storage Expansion Units(P/N 35601RU).• Two hot-swap 350W auto-ranging, redundant power supplies.• Redundant fans: two hot-swap, dual-fan units.• LED indicators on all critical components warn of faults, over-temperature, and other abnormalities.• Ten drive bays - supports slim-line or half-high Fibre Channel hot-swap HDDs.• Height is 3U (1U=1.75in or 44.45mm).• Supports long- and short-wave connections. Requires optional GBICs for each connection. GBICs notincluded.SAN Fibre Channel Switch, 8-port (P/N 3534F08)• Provides 2Gb per second port-to-port throughput with autosensing capability for connecting to 1Gbper second host servers, storage and switches with full operability.• Contained in a 1U mechanical.• Includes a comprehensive set of management tools that support a Web browser interface.• Four short-wave SFP Modules (optical transceivers) are standard.• Supports up to 192 ports in a single 42U rack (scalable to 239 switches maximum).• Additional related options include F08 Full Fabric Activation (P/N 18P5060), Performance BundleActivation (P/N 18P4405), Fabric Manager Version 4.0 (P/N 17P7180) and F08 Advanced SecurityActivation (P/N 18P4411).SAN Fibre Channel Switch, 16-port (P/N 2109F16)• Provides 2Gb per second port-to-port throughput with autosensing capability for connecting to 1Gbper second host servers, storage and switches with full operability.• Contained in a 1U mechanical, requiring half the rack space of the 1Gb16-port switch.• Up to four Inter-Switch Links can be trunked for throughput of up to 8Gb per second.• Includes a comprehensive set of management tools that support a Web browser interface.• Eight short-wave SFP Modules (optical transceivers) are standard.• Built-in redundancy with no single points of failure.• Supports up to 384 ports in a single 42U rack (scalable to 239 switches maximum).• Ships with one hot-swap 126W power supply. and supports an optional redundant power supply(P/N 18P3576).• Additional related options include Remote Switch Activation (P/N 18P3579), Extended FabricActivation (P/N 18P3580), F16 Performance Bundle Activation (P/N 18P3590), Fabric ManagerVersion 4.0 (F16) (P/N 18P7182) and F16 Advanced Security Activation (P/N 18P3596). Power cordsfor nonrack installation are available by country.LC-SC Fibre Channel Adapter Cable (P/N 19K1250)A (female LC)B (male SC)280 Configuration and Options Guide• Nine-inch adapter cable used to connect 1Gb cable or devices to 2Gb cable or devices.


Refer to the Important Notices section for important notices• To plug into a FAStT Host Adapter integrated GBIC (or any short-wave GBIC), remove the black capsfrom the 1Gb male SC connector (B).• To attach LC-LC cable, remove the white caps from the 2Gb female LC connector (A) and insert themale connector of the LC-LC cable.FAStT900 Storage Server (P/N 174290U)Mini hubExpansion bays foradditional mini hubsMini hubHost SFPModuleportsDrive SFPModuleportsPower supplies• Dual high-performance RAID controller cards supporting up to 772MB/sec of throughput.• Operates at 1Gb or 2Gb (autosensing).• Dual 175w auto-ranging, hot-swap, redundant power supplies.• Attach directly to FC2-133 Host Bus Adapter (P/N 24P0960) with short-wave cables and SFP Modulesor indirectly through the SAN Fibre Channel Switch, 16-port (P/N 2109F16) or TotalStorage SANSwitch F08, 8-port(P/N 3534F08) using LC-LC cables from cable group D2 or E with corresponding SFP Modules.• Height is 4U (1U = 1.75in or 44.45mm).• For optimum performance no more than two FAStT900 Storage Servers(P/N 174290U) should be attached to a a single Fibre Channel switch.• Includes four FAStT700 Mini Hubs (P/N 19K1269), two host-side and two storage drive-side.• Each controller is equipped with 1GB of cache (2GB total).• All connections to FAStT700 Mini Hubs require the use of SFP Modules, which are not included.FAStT600 Storage Server (P/N 172260U)EthernetHost port 2Expansion portHost port 2EthernetExpansion portHost port 1Serial portHost port 1Serial portAC powerconnectorAC powerswitchServer IDswitchAC powerconnectorAC powerswitch• Compact 3U rack-mountable enclosure.• Dual 2Gbps RAID controllers with 256MB cache (128MB per controller) supporting up to 400MB/s ofthroughput.• Fourteen Fibre Channel HDD bays (over 2TB of storage capacity).• Redundant hot-swap 390w power supplies and cooling fans.• Supports two FAStT EXP700 Expansion Units via EXP700 attachment features.• Supports RAID types 0, 1, 3, 5, 10.• Four host ports standard (two per controller), attaching to either Fibre Channel switched fabrics orhost servers.• Short and long-wave Fibre Channel host attachment.• FAStT Storage Manager v8.33 with upgrade capability for eight storage partitions.• All host and expansion connections require SFP Modules (not included).Chapter 40. Fibre Interconnection Guidelines 281


282 Configuration and Options Guide


Chapter 41. Rack Cabinets and OptionsNetBAY11Standard RackNetBAY25 andS2 25U Standard RackNetBAY42 andS2 42U Standard RackNetBAY42Enterprise RackU40U40AB30U20CD20AB3020U10AB10 E10FCD10283


NetBAY11StandardRackNetBAY25StandardRack 1NetBAY42Standard RackS2 25UStandardRackS2 42U StandardRackNetBAY42Enterprise RackMachine TypeModelEIA Capacity 2SidewallCompartments9306110 9306250 9306420 9306421 93072SX 93074SX 93074EX 930842S 930842E11U 25U 42U 42U 25U 42U 42U 42U 42U0 2 6 6 2 6 6 4 4Front Stabilizers Std Std Std Std Std Std Std Std StdSide Stabilizers NR NR Std Std NR Std 3NR NR NRCasters Std Std Std Std Std Std Std Std StdLeveling Feet NA Std Std Std Std Std Std Std StdSide Covers Std Std Std NR Std Std NR Std NRRack Attachment Kit 4NA NA NR Std NA NR Std NR StdGlass Front Door NA NA NA NA NA NA NA NA NAPerforated Front Door Std Std Std Std Std Std Std Std StdPerforated Rear Door NA Std Std Std Std Std Std Std StdHeight (mm/in) 5611 / 24.1 1360 / 53.5 2076 / 81.7 2076 / 81.7 1244/49 1999/78.7 1999/78.7 2020 / 79.5 2020 / 79.5Width (mm/in) 518 / 20.4 600 / 23.6 600 / 23.6 600 / 23.6 605/23.8 605/23.8 600/23.6 648 / 25.5 648 / 25.5Depth (mm/in) 873 / 34.4 1000 / 39.4 1000 / 39.4 1000 / 39.4 1000/39.4 1000/39.4 1000/39.4 1105 / 43.5 1105 / 43.5Empty Weight (kg/lb) 34 / 75 80 / 177 117 / 258 92 / 202 100/220 125/276 94/207 261 / 575 234 / 516Max Load (kg/lb) 182 / 401 385 / 849 646 / 1424 646 / 1424 567/1250 907/2000 907/2000 667 / 1470 667 / 1470Total Weight (kg/lb) 216 / 476 465 / 1026 763 / 1682 738 / 1626 667/1470 1032/2276 1032/2276 928 / 2045 901 / 1986Shippable Loaded 6Yes Yes No No Yes No No Yes YesNote: NR - Not Required; NA - Not Available; 1U=1.75in (44.5mm)1. Display and keyboard may be placed on top of the NetBAY25.2. Conforms to EIA 310 - D Standard 19in rack specification for a Type A cabinet with universal hole spacing.3. Side stabilizer brackets are included to bolt the cabinet to the floor. They are needed when a single, standalone cabinet is lightly loaded. See theinstallation instructions for additional information.4. Required to attach racks together to make a suite.5. Minimum clearance to the ceiling is 305mm / 12in.6. ‘Shippable loaded’ means the cabinet is capable of being transported with equipment installed. Required packaging is provided. The integrator/assembleris responsible for assuring the stability of the shipped configuration. Rack Integration Services are available from IBM.284 Configuration and Options Guide


Refer to the Important Notices section for important noticesServer System Rack AlternativesConversion Kits Standard Racks 1EnterpriseRacks 109N43004Ux20D Tower-to-Rack Kit59P48174U Extended DepthTower-to-Rack Conversion Kit59P42115Ux24D Tower-to-Rack Kit III32P14747Ux26D Tower-to-Rack KitNetBAY11 (9306-110)NetBAY25SR (9306-250)S2 25U (9307-2SX)NetBAY42SR (9306-420)S2 42U Standard Rack (9307-4SX)NetBAY42SX (9306-421)S2 42U Expansion Rack (9307-4EX)9308-42SNetBAY42ER9308-42ENetBAY42EXServersxSeries 205 2X X X X X X XxSeries 206 2 X X X X X X XxSeries 225 2 X X X X X X XxSeries 235 X X X X X X XxSeries 255 X X X X X X XxSeries 305 3xSeries 306 4X X X X X XX X X X X XeServer 325 X X X X X Xxseries 335 X X X X X XxSeries 345 4 X X X X X XxSeries 365 X X X X X XxSeries 382 X XxSeries 445 X X X X X XxSeries 455 X X X X X XBladeCenter X X X X X XBladeCenter T, 8720 X X X X X XBladeCenter T, 8730 X X X X X X1. See the first page of Rack Cabinets and Options section for additional information concerning IBM racksupporteddevices.2. Rack installation requires appropriate conversion kit.3. Blank filler panels (P/N 94G6670) should be placed on the front of any unused rack space to aid properairflow through the system units. If non-IBM racks are used, assure that both the front and rear doors offera minimum of 45% open area uniformly distributed and in line with the installed servers. A clearance of atleast 51mm (2in) must be maintained between the front door and the system unit’s front bezel. The reardoor must maintain the same or greater clearance. Nonrack installations are not supported.4. If installed in older IBM racks, the server should not be installed behind a glass door that blocks air flow.Remove the glass door or replace with an optional perforated door. To order a rack extension kit for withdrawnIBM racks, visit the Options Continuation Program Website. See the Information Sources section forthe URL.General rack placement rules and other information:• Locate heaviest components at the bottom of the rack (i.e., UPS, then servers or storage, etc.).• Do not extend more than one component on side rails at a time.• Maximum of three UPSs (including no more than two APC 5000 UPSs) per rack.• Utilize sidewall compartments for mounting PDUs and console switches prior to using EIA space.• When mounting components in a rack, consider user and service requirements.Chapter 41. Rack Cabinets and Options 285


• When selecting length of power, console and storage cables, consider extension of cable managementarms and overall cable routing.• BTUs = Watts x 3.41.Standard Power Cords 1DescriptionMachineType / ModelSize (U) 2Depth (in) 3Approx Weight(lbs) 4Power (Watts)Typical/Max(All cords to samesource)Number of P/Sand Line Cordsbasic/max6ft NEMA 5-15PP/N 69523019ft NEMA 5-15PP/N 69523009ft NEMA 6-15PP/N 18385749ft IEC 320-C14P/N 36L888614ft IEC 320-C19/C14P/N 12J5995 5Server System Units:6x205 8480 4 20 43 340/485 1/1 16x206 8482 4 19 46 340/485 1/1 16x225 8649 4 26 57 420/600 1/1 16x225 w/redundant power 8649 4 26 57 490/700 2/2 26x235 8671 5 24 83 560/800 1/2 1x255 6 8685 7 25 120 530/1000 2/2 7 2 2x3058 8673 1 17 28 140/200 1/1 1 19x306 8836 1 20 28 300/430 1/1 1e325 8835 1 26 28 400/587 1/1 1 18x335 8676 1 26 29 245/340 1/1 1 19x345 8670 2 29 62 350/500 1/2 1 1x365 8862 3 28 115 770/1100 2/2 2x382 8834 2 29 76 700/1000 2/2 3 210x445 8687 4 28 120 800/950 2/2 2 2x455 8855 4 28 120 600/700 2/2 2BladeCenter w/2 power supplies 8677 7 28 134 1050/1500 2/2 2BladeCenter w/4 power supplies 8677 7 28 230 2100/3000 4/4 4I/O Units:RXE-100 86841RU 3 26 56 260/370 2/2 2 2Storage Units:EXP400 17331RU 3 22 85 310/440 2/2 2 2FAStT200 35421RU 3 22 56 275/390 2/2 2FAStT200HA 35422RU 3 22 56 275/390 2/2 2FAStT600 172260U 3 24 46 390/557 2/2 2FAStT700 17421RU 4 24 85 140/200 2/2 2FAStT900 174290U 4 24 85 140/200 2/2 2FAStT EXP100 171010U 3 23.5 57 245/350 2/2 2FAStT EXP500 35601RU 3 22 61 245/350 2/2 2286 Configuration and Options Guide


Refer to the Important Notices section for important noticesFAStT EXP700 17401RU 3 23 91 245/350 2/2 2 2FC Switch 8-port 3534F08 1 17 17 -/50 1/1 1FC Switch 16-port 2109F16 1 25 28 -/200 1/2 1Tape Components:NetBAY 1U xSeries Tape Enclosure 45591UX 1 20 16 - 1/1 1NetBAY Tape Enclosure 0034B0X 4 18 39 320/457 1/1 1Full-High SCSI Tape Enclosure 3503B1X 3 11 8 - 1/1 13607 Series SDLTpro TapeAutoloader360716X 2 29.7 66 60/80 1/1 13607 Series LTO Tape Autoloader 360726X 2 29.7 66 60/80 1/1 1SDLT/LTO Modular Tape Library 4560SLX 5 31 70 300/430 1/1 1 11. Refer to Appendix eServer BladeCenter Power Upgrade Guidelines for important information that will help determine when a BladeCenterpower module upgrade is necessary.2. 1U = 1.75in (44.45mm).3. Includes three N+1 redundant power supplies. Uses only two power cords.4. Weight equals maximum ship configuration.5. Optional rack power cords: P/N 94G6667 - 14ft NEMA 5-15P; P/N 94G7448 - 14ft IEC 320-C14.6. Rack installation requires appropriate tower-to-rack conversion kit.7. Additional power cords are not required. This power supply option shares use of line cords provided with the base system. Should be orderedin pairs to maintain redundancy.8. To provide adequate cooling, blank filler panel kit (P/N 94G6670) should be placed on the front of any unused rack space. If non-IBM racks areto be used, assure that both front and rear doors offer a minimum of 48% open area uniformly distributed and in line with installed servers. Aclearance of 51 to 64mm (2 to 2.5in) must be maintained between the front of the door and the system unit’s front bezel. The rear door must maintainthe same or greater clearance. Nonrack or NetBAY3 installations are not supported.9. If installed in older IBM racks, the server should not be installed behind a glass door that blocks air flow. Remove the glass door or replace withan optional perforated door. To order a rack extension kit for withdrawn IBM racks, visit the Options Continuation Program Website atwww.pc.ibm.com/ww/ocp.10. Internal power supply logic limits low voltage (100-127VAC) to 550w per power supply. Thus, configurations requiring more power are notredundant for low voltage installations, e.g., configurations with more than two processors.Power Supply OptionsStandard Power CordsPower SupplyPart NumberUsable with6ft NEMA 5-15P69523019ft NEMA 5-15P69523009ft IEC 320-C1436L88869ft IEC C13/C2074P44308.2ft IEC C19/C2000N770114ft IEC 320-C19/C1412J59958.2ft IEC 320-C19NEMA 5-15P12J5112126w 18P3576 2109-F16 1950w 73P9709 x365 1 1350w 59P4057 x345 1514w 74P4965 x345 1 1370w 31P6108 RXE-100 1 1370w 31P6133 x255 1560w 02R1874 x235 22660w 02R2015 x235 2 21200w to 1400wUpgrade Kit90P0197 BladeCenter 341800w 13N0570 BladeCenter 3 21. Additional power cords are not required. This power supply option shares use of line cords provided with the base system.Should be ordered in pairs to maintain redundancy.2. Option includes two hot-swap power supplies and a power backplane. 02R1874 is compatible only with 533MHz FSB.3. Refer to Appendix eServer BladeCenter Power Upgrade Guidelines for important information that will help determinewhen a BladeCenter power module upgrade is necessary.Chapter 41. Rack Cabinets and Options 287


Rack OptionsOptionNumberDescriptionInformation28L4707 Netfinity Rack Keyboard Tray Supports keyboards in racks, also used with Flat Panel Monitor Rack Mount Kit II28L3644 Space Saver II Keyboard 1U, includes TrackPoint IV, requires Rack Keyboard Tray (P/N 28L4707)94G7444 Monitor Compartment Size depends on monitor, space for CRT or Flat Panel Monitor and a consoleswitch.633147N E54 Color Monitor 9U, requires Monitor Compartment (P/N 94G7444)63324HN E74 Color Monitor 10U, requires Monitor Compartment (P/N 94G7444)32P170232P170332P103132P103217231UX17231NXNetBAY 2U Flat Panel Monitor Console Kit withSpace Saver Keyboard (US)NetBAY 2U Flat Panel Monitor Console Kitwithout keyboardNetBAY1U Flat Panel Monitor Console Kit withSpace Saver Keyboard (US)NetBAY 1U Flat Panel Monitor Console Kitwithout keyboard1U Flat Panel Monitor Console Kit (with US SpaceTravel keyboard)1U Flat Panel Monitor Console Kit (withoutkeyboard)2U, built-in 15in Flat Panel Monitor (15in viewable image), includes SpaceSaverKeyboard-US English (P/N 28L3644)2U, built-in 15in Flat Panel Monitor (15in viewable image), space for SpaceSaverKeyboard1U, built-in 15in Flat Panel Monitor (15in viewable image), includes SpaceSaverKeyboard - US English (P/N 28L3644)1U, built-in 15in Flat Panel Monitor (15in viewable image), space for SpaceSaverKeyboard1U, built-in 17in Flat Panel Monitor (17in viewable image), includes TravelKeyboard - US English (P/N 73P3144)1U, built-in 17in Flat Panel Monitor (17in viewable image), space for TravelKeyboard09N4290 NetBAY 1 x 4 Console Switch 1U, mounts in sidewall compartments, EIA space or Monitor Compartment;supports one to four servers, one console09N4291 NetBAY 2 x 8 Console Switch 1U, mounts in sidewall compartments, EIA space or Monitor Compartment;supports one to eight servers, two consoles (only one console when installed in theMonitor Compartment)09N4293 Console Cable Set - 7ft Connects servers to console switch94G7447 Console Cable Set - 12ft Connects servers to console switch1735L04 Local Console Manager 1U, mounts in sidewall compartments, EIA space or behind 1U Console Kit;supports one to 64 servers, one local console1735R16 Remote Console Manager 1U, mounts in sidewall compartments or EIA space; supports one to 256 servers,one local console and two remote consoles32P1636 Short KVM Conversion Option Converts the console signals of servers without cable management arms (not onslides) so they can be chained to connect to a Local or Remote Console Managerusing Cat5 cable32P1652 Long KVM Conversion Option Converts the console signals of servers with cable management arms (on slides) sothey can be chained to connect to a Local or Remote Console Manager using Cat5cable32P1637 C2T Conversion Option Converts the console signals of a chain of C2T-capable servers so they can beconnected to a Local or Remote Console Manager using Cat5 cable32P176132P1736DPI 100-127 PDU with Fixed NEMA L5-15P linecordDPI Universal Rack PDU with NEMA L5-20P andL6-20P (US line cords)1U, 100-127v, 12a, single-phase, mounts in sidewall compartment or EIA space, sixNEMA 5-15R outlets, requires one L5-15R wall receptacle1U, 100-240v, 15a, single-phase, mounts in sidewall compartment or EIA space,sevenIEC 320-C13 outlets, requires one NEMA L5-20R or L6-20R wall receptacle32P1751 DPI 30a/125v Front-end PDU with NEMA L5-30P32P1766 DPI 30a/250v Front-end PDU with NEMA L6-30P32P1767 DPI 60a/250v Front-end PDU with IEC 3092P+Gnd1U, 100-127v, 24a, single-phase, mounts in sidewall compartment or EIA space,threeIEC 320-C19 outlets, requires one NEMA L5-30R wall receptacle1U, 200-250v, 24a, single-phase, mounts in sidewall compartment or EIA space,threeIEC 320-C19 outlets, requires one NEMA L6-30R wall receptacle1U, 200-250v, 48a, single-phase, mounts in sidewall compartment or EIA space,threeIEC 320-C19 outlets, requires one 60a IEC 309 2P+G wall receptacle73P5855 DPI Single-phase 60a/208v High Density PDU 1U, 200-208v, mounts in sidewall compartment or EIA space, twelve 320-C19outlets, requires one 60a IEC 309 2P+G wall receptacle.73P5847 DPI Three-phase 60a/208v High Density PDU 1U, 200-208v, mounts in sidewall compartment or EIA space, twelve 320-C19outlets in three groups of four, requires one 60a IEC 309 3P+G wall receptacle.32P1020 APC 2U Smart-UPS 1400RMB 2U, 120V, 9.5A, six NEMA 5-15R outlets, requires one NEMA L5-15R wallreceptacle288 Configuration and Options Guide


Refer to the Important Notices section for important noticesRack OptionsOptionNumberDescriptionInformation2130R30 UPS3000XLV (US) 2U, 120v, 24a, six IEC C13 outlets, 1 NEMA L5-20R outlet, requires one NEMA L5-30R wall receptacle2130R31 UPS3000XHV (US) 2U, 200-240v, 14.25a, seven IEC C13 outlets, 1 IEC C19 outlet, requires one NEMAL6-20R wall receptacle32P1692 UPS Extended Run Battery Pack 2U, up to four may be attached to the UPS3000XLV or XHV to extend run timewhen using the batteries37L6861 APC Smart-UPS 5000RMB 5U, 208V, 18.75A, eight IEC 320-C13 outlets, two IEC 320-C19 outlets, requires oneNEMA L6-30R wall receptacle; ships standard with two IEC 320-C19 to C20 cablesto support PDUs94G6670 Blank Filler Panel Kit Consists of one 5U, one 3U, and two 1U blank filler panels94G7442 Fixed Shelf Supports up to 100lbs94G6667 Rack Power Cord - C13/NEMA 5-15P IEC 320-C13 to NEMA 5-15P (14ft)94G7448 Rack Power Cord - C13/C14 IEC 320-C13 to IEC 320-C14 (14ft)23K4809 Rack Power Cable - C13/C20 IEC 320-C13 to IEC 320-C20 (2.8m)90P4849 Rack Power Cable - C19/C20 IEC 320-C19 to IEC 320-C20 (2.5m)KDAKMCHEFFBJCGLDeviceExtensionFrontIChapter 41. Rack Cabinets and Options 289


9306-110(inches)9306-xxx(inches)9307-xxx(inches)9308-xxx(inches)DescriptionBox FootprintA 20.4 23.6 23.6 25.5 Width of rackB 34.4 39.4 39.4 43.5 Depth of rack (not including front stabilizer)C 21 24 24/12.5 26 Front/rear door clearance (when required)Operational ClearanceD 24.4 27.6 27.5 29.5 Width of Operational Clearance areaE 74.4 93.4 93.4 110 Depth of Operational Clearance areaF 2 2 2 2 Left/Right sides of rack to Operational Clearance areaG 30 36 36 36 Front of rack to Operational Clearance areaH 10 24 24 26 Rear of rack to Operational Clearance areaService ClearanceI 26 95.6 95.6 97.5 Width of Service Clearance areaJ 78.3 129.4 129.4 133.5 Depth of Service Clearance areaK 2.8 36 36 36 Left/Right sides of rack to Service Clearance areaL 36 60 60 60 Front of rack to Service Clearance areaM 30 30 30 30 Rear of rack to Service Clearance area290 Configuration and Options Guide


Chapter 42. Rack Console OptionsA console consisting of a keyboard, monitor and pointing device is required by each server for systemmaintenance and support. The console may be local or remote and may be dedicated to a single server orshared across a large array of servers, which requires the use of one or more console switching devices.Flat Panel Monitor Console KitsMulti-server Console Switching1. Standard PS/2 Keyboard - Video - Mouse (KVM)2. IBM C2T Interconnect Cable Chaining Technology291


3. IBM Advanced Connectivity Technology (ACT)Refer to the cable labeling key in the Cable Options table appearing later in this section.Refer to the cable labeling key in the Cable Options table appearing later in this section.292 Configuration and Options Guide


Refer to the Important Notices section for important notices3. Advanced Connectivity Technology (ACT)RemoteConsoleVLANConsoleup to 16 serversper chainKVM or USBServerKVM or USBServerKVM or USBServerup to 42 serversper chainC2T ServerC2T ServerC2T Server[d,e,g]KCO orUCOCCO[f]1 chain per portLCM/RCM SwitchCat5cable[h]up to 4 or 16 ports[d]KCOup to 3 BladeCentersper chainBladeCenterBladeCenterBladeCenter[d] KCO1 switch per portConsole Switch[a]BladeCenterup to 4 or 8 servers,BCs, or chainsKVM ServerC2T ServerC2T ServerC2T Server[c]1 chain per portSwitch OptionsPorts Capacity Standard PartsIN OUT TwolevelTieringPart NumberDescriptionType of switchTypeQtyTypeQtymax KVM serversmax USB serversmax BladeCenterC2T chainsACT chainsKVM switchesmax KVM serverslocal consolesremote consoles1U blank filler panel1.8m Cat5 cableCat5 terminatorEIA mountingside-wall mounting09N4290 1x4 Console Switch KVM PS2 4 PS2 1 4 - 4 4 0 4 16 1 0 - - - - 109N4291 2x8 Console Switch KVM PS2 8 PS2 2 8 - 8 8 0 8 64 2 0 1 - - 1 11735L041735R16Local ConsoleManagerRemote ConsoleManagerACT Cat5 4 PS2 1 64 64 12 64 4 4 32 1 0 1 1 4 1 1ACT Cat5 16 PS2 1 256 256 48 256 16 16 128 1 2 1 1 16 1 1LAN1Chapter 42. Rack Console Options 293


Switch Placement RulesMounting Locations 1x4 2x8 LCM RCMmonitor shelf \ switch bay yes yes no no3U Console \ switch bay yes yes yes yes1U Console \ switch bay yes yes yes nowith (above) 2U console yes yes yes yesside-wall compartment yes yes yes yesU compartment (EIA space) no yes yes yesCable OptionsLabelPart NumberDescription2.1m KVM cable3.8m KVM cable(PS2 male to PS2 male)260mm C2T chaining cable 12m C2T chaining cable 22m C2T breakout cable(C2T male to PS2 female)250mm KCO cable(PS2 male to RJ45)1.5m KCO cable(PS2 male to RJ45)114mm CC0 cable(C2T male to RJ45)1.5m UCO cable(USB, DB15 to RJ45)150mm Cat5 cable(RJ45 to RJ45350mm Cat5 cable(RJ45 to RJ45)1.8m Cat5 cable(RJ45 to RJ45)Usage[a] 09N4293 Console Cable Set - 7ft 1 - - - - - - - - - - - servers with PS2KVM ports 3[a] 94G7447 Console Cable Set - 12ft - 1 - - - - - - - - - - servers with PS2KVM ports 3[b] with server C2T Interconnect chaining cable - - 1 - - - - - - - - - (included with x335) 4[c] 06P4792 C2T Interconnect Cable Kit - - - 1 1 - - - - - - - x335[d] 32P1636 short KVM Conversion Optionkit[e] 32P1652 long KVM Conversion Optionkit[f] 32P1637 C2T Interconnect ConversionOption kit- - - - - 4 - - - 4 - - (x305, x306, BC,Console Switch) 5- - - - - - 4 - - - 4 - servers with cablemanagement arms- - - - - - - 1 - - - 1 x335 5[g] 73P5832 USB Conversion Option Kit - - - - - - - - 4 - 4 - e325, x382, x455 5[h] - Cat5 cable provided with option or by customerNote: KVM switches may be interconnected to form a two-level tier for attaching up to 16, 32 or 64 servers.1. Short C2T Interconnect chaining cable included standard with the C2T-capable servers.2. C2T Interconnect Cable Kit (P/N 06P4792) includes a long C2T chaining cable for use when interconnected servers are farther than three EIAunits apart.3. PS2 KVM connectors: keyboard 5-pin DIN, mouse 5-pin DIN, video HD-15 VGA.4. C2T Interconnect ports use special connectors.5. ACT conversion options convert from PS2 KVM, USB plus VGA or C2T interconnect to Cat5 RJ45 connectors.294 Configuration and Options Guide


Chapter 43. xSeries Rack Power ConfiguratorRack Power Products:Distributed Power Interface Power Distribution UnitsDPI 100-127v NEMA PDUDPI Universal Rack PDUDPI Single-phase Front-end PDUsDPI Single-phase High Density PDUDPI Three-phase High Density PDUPossible Power Configurations:Single Rack PDU(1)Device / UnitP/SHigh Density PDURack PDU7 outlets - C13100-240Vac15aPDUC13up to 7Rack PDUPDU(1)P/SP/SUnits withC14 Inlets(2)Redundant Power Distribution(1)Units withredundant p/sHD- PDU12 outlets - C19single- orthree-phaseHD-PDU(4)(7)Units with C20 Inletseg. x365, BladeCenter 2XXP/SPDUP/SP/SPDU(8)(9)P/SUnits withC14 Inletspn 23K4809 2.8m C13/C20 power cable(2)PDU used as UPS back-end(1)PDUC13Device / UnitRedundant Power Distributionwith PDU and UPSPDU(1)Units withredundant p/sRedundant Power Distributionwith PDU and UPS with PDU(1)PDUUnits withredundant p/sPDU(3)C19UPSC13(2)(6)UPS(3)(2)(6)UPS(3)(6)Outlets:Outlets C19 C13 5-15RNEMA PDU 0 0 6Rack PDU 0 7 0Front-end PDU 3 0 0High Density PDU 12 0 0US modelsEMEA modelsOutlets C19 C13 5-15R L5-20R C19 C13 L5-20RAPC 2U 1400RM 0 0 6 0 0 4 0IBM 3000X LV 0 6 0 1 (10) 0 6 1 (10)IBM 3000X HV 1 7 0 0 1 7 0APC5000RM 2 8 0 0 2 8 0295


Typical Rack Power ConfigurationsTypical Rack Power Configurations :Simple: two Rack PDUs(two circuits, 14 outlets)RackCabinetSimple: three Rack PDUsand one Front-end PDU(single circuit, 21 outlets)RackCabinetPDURedundant: six Rack PDUsand two Front-end PDUs (dualcircuit, 42 outlets)PDURackCabinetPDUPDU(4)PDUPDUPDURack PDU7 outlets - C131 inlet - C20PDUPDU(4)PDUPDUFEFront-end PDU3 outlets - C191 inlet - hardwiredFEFE(2)(5)(5)Notes (reference both this and the previous page):(1) Each device usually comes with a power cord. The PDU requires the power cord to have an IEC320-C14 plug. Order94G7448 (14ft) if appropriate cord is not provided with the device.(2) Each PDU and UPS comes with a country-specific power cord.(3) Internal rack power cable is provided with APC SmartUPS 5000 UPS.(4) One 2m internal rack power cable provided withDPI Rack PDU.(5) Line cord provided with Front-end PDU.(6) UPS comes with a country-specific power cord or a terminal block.(7) Devices with C20 power inlets included 2.8m C19 to C20 power cords.(8) High Density PDU includes hardwired line cord.(9) Option 23K4809 provides a C13 to C20 power cord to attach normal devices with C14 power inletsdirectly to Front-end or High Density PDUs.(10) Includes L5-20P to L5-15R adapter cable.(11) P/S = Power SupplyCustomers are responsible for providing a dedicated circuit for each line cord protected with an appropriatecircuit breaker .Standard Racks9306-420, 421Enterprise Racks9308-42P, X, S, ERack Rules and PDU CapacitiesNetBAY and DPI PDUs cannot be mixed in the same side-wallcompartment.DPI Rack PDUs can be cabled to NetBAY Front-end PDUs.PDUs/RackStandard9306-Enterprise9306-9308250 420,4212-bay 2-bay 2-bay 3-bay 4-bayRack PDUs 4 8 8 8 129306-250ACUBDAUBFront-end PDUs 2 4 2 4 4High Density PDUs 2 4 4 4 4Total PDUs 4 12 8 12 16AUBEFCD296 Configuration and Options Guide


O3O2O1O12O11O10O9O8O7O6O5O4O3O2O1ESW1M1PS3PS1E1PM3SM3PM1 MM12VSM13K4MESW2PS4PS212SM4 SM2 PM4PM2 MM234SM3ESW112 SM134PS3PM3PS1PM1M1EMM1 VKMESW2PS4PS21SM4 SM22PM4PM2 MM234ESW1M1PS3PS1E1PM3SM3PM1 MM12VSM13K4MESW2PS4PS21SM4 SM22PM4PM2 MM234O3O2O1O12O11O10O9O8O7O6O5O4O3O2O1O12O11O10O9O8O7O6O5O4O3O2O1O12O11O10O9O8O7O6O5O4O3O2O1O12O11O10O9O8O7O6O5O4O3O2O1Refer to the Important Notices section for important noticesSide-wall Compartment Configurations2-bays per compartment(9306)2-bays per compartment(9308)3-bays per compartment(9308)4-bays per compartment(9308)HD-PDUs(9306/9308)RackPDURackPDURackPDURackPDUFront-endPDURackPDURackPDURackPDURackPDURackPDURackPDUHighDensityPDUFront-endPDURackPDUFront-endRackPDUFront-endPDUFront-endPDURackPDURackPDURackPDURackPDUFront-endPDUFront-endPDUHighDensityPDUPDURackPDUBladeCenter examples:4241403938373635BladeCenter --Single-phase FE-PDUs(Redundant)Six BladeCenters --Three-phase HD-PDUs(Redundant)424140 BC39383736353434B3332 BC31302928272625242322212019ATwo BladeCenters --Single-phase HD-PDUs(Non-Redundant)B33 BC323130292827BC 26252423222120BC 1918A18171716D1615141312 BC111098CD15141312 BC11109876C76BC 5BC 543423211rear viewrear viewChapter 43. xSeries Rack Power Configurator 297


Country-Specific Considerations: USA, Canada parts of Latin America,TaiwanPower Cables:(1) Device to Rack PDU power cableIEC C13 to C14, 10/15a cabletypical: 36L8886 (2.8m)requirement: C14 plug, long enough to reachavailable option: 94G7448 (14ft)(2) Rack PDU to wall line cordIEC C19 to country-specific connector, 16/20a,14ft (4.3m)(3) Rack PDU to UPS power cableIEC C19 to C20, 16/20a00N7700 (2m)provided with 37L6861 APC SU-5000RMB(4) Rack PDU to Front-end PDU power cableIEC C19 to C20, 16/20a00N7698 (1m) provided with the NetBAYFront-end PDUs00N7700 (2m) provided with the DPI Front-endPDUs(5) Front-end PDU to wall line cordspecial to country-specific connector, 30/32a,60/63a, 8.2ft (2.5m)(7) Device to High Density PDU power cableIEC C19 to C20, 16/20a, 2.5m(8) High Density PDU to wall line cordhardwired to country-specific connector, 60a,8.2ft (2.5m)(9) Device to FE- or HD-PDU power cableIEC C13 to C20, 10/15a cableoption: 23K4809 9ft (2.8m)(2) Line Cords: Rack PDU(5) Line Cords: Front-end PDU(8) Line Cords:High Density PDUDPI PDUsRack PDUsPart Plug TypeSource CircuitPDU OutputNumber(single phase 50/60Hz) (single phase 50/60Hz)32P1761 NEMA L5 -15 P 100-127Vac, 15a six 100-127Vac, NEMA 5-15Rreceptacles, shared 12aseven 100-127Vac, shared 15aNEMA L5-20P 100-127Vac, 20a32P1736NEMA L6-20P 200-240Vac, 20a seven 200-240Vac, shared 15aFront-end PDUsPart Plug Type Source Circuit (50/60Hz) PDU OutputNumber(single phase 50/60Hz)32P1751 NEMA L5-30P 100-127Vac, 30a, single-phase three 100-127Vac, 20a each,shared 24a32P1766 NEMA L6-30P 200-240Vac, 30a, single-phase three 200-240Vac, 20a each,line-to-line with groundshare d 24a32P1767 IEC 309-2P+G 200-240Vac, 60a, single-phase three 200-240Vac, 20a each,line-to-line with groundshared 48aHigh Density PDUsPart Plug Type Source Circuit (50/60Hz) PDU OutputNumber(single phase 50/60Hz)73P5855 IEC 309 2P+G 208Vac, 60a, single-phasetwelve 208Vac, 16a each, shareddedicated circuit48a73P5847 IEC 309 3P+G 208Vac, 60a, three-phase delta twelve 208Vac, 16a each,dedicated circuitshared 28a per four outlet phasegroupNotes:N = NEMA PDU with a 12a circuit breakerC = Rack PDU with a 15a circuit breakerW = FE PDU with a 20a fuse per outletS = HD PDU with 20a circuit breaker per outletMax leakage current > 3.5maA customer-supplied dedicated circuit is assumed.Actual power values (watts) may vary based on actual sourcevoltage.115-127v1 phase15aNEMA L5-15R115-127v1 phase20aNEMA L5-20RL5-15PL5-20PLow VoltagePower Load CapacityNC1380w1725 w208v1 phasew/neutral20a208vline-to-linew/ground30a208vline-to-linew/ground60aL6-20PL6-30P3-wireIEC 3092P+G3-wireHigh VoltageCshared 24aW1ph4992wshared 48aW1ph9360w3120 w208v208vCCCCCC1664w3120w max1664w1664w3120w3120w max3120w3120w115-127v1 phase30aNEMA L5-30RL5-30Pshared 24aW1ph2760w115vCCC920 w920w920 w208v1 phase60aIEC 3092P+G3-wireshared 48aS 9984w1ph9984w208vshared 28a per phase208v208v3 phasedelta60aIEC 3093P+G4-wireS3ph5771w5771w5771w17313w298 Configuration and Options Guide


Refer to the Important Notices section for important noticesCountry-Specific Considerations: Europe, Africa, Asia Pacific, parts ofLatin AmericaDPI PDUsRack PDUsPower Cables:(1) Device to Rack PDU power cableIEC C13 to C14, 10/15a cabletypical: 36L8886 (2.8m)requirement: C14 plug, long enough to reachavailable option: 94G7448 (14ft)(2) Line Cords: Rack PDUs(2) Rack PDU to wall line cordIEC C19 to country-specific connector, 16/20a,14ft (4.3m)(3) Rack PDU to UPS power cableIEC C19 to C20, 16/20a00N7700 (2m)provided with 37L6861 APC SU-5000RMB(4) Rack PDU to Front-end PDU power cableIEC C19 to C20, 16/20a00N7698 (1m) provided with the NetBAYFront-end PDUs00N7700 (2m) provided with the DPI Front-end(5) Line Cords: Front-end PDUsPDUs(5) Front-end PDU to wall line cordspecial to country-specific connector, 30/32a,60/63a, 8.2ft (2.5m)(7) Device to High Density PDU power cable(8) Line Cords:High Density PDUIEC C19 to C20, 16/20a, 2.5m(8) High Density PDU to wall line cordhardwired to country-specific connector, 60a,8.2ft (2.5m)(9) Device to FE- or HD-PDU power cableIEC C13 to C20, 10/15a cableoption: 23K4809 9ft (2.8m)A customer-supplied dedicated circuit is assumed.Part Plug TypeSource CircuitPDU OutputNumber(single phase 50/60Hz) (single phase 50/60Hz)32P1761 NEMA L5- 15 P 100-127Vac, 15 a six 100-127Vac, NEMA 5-15Rreceptacles, shared 12 aNEMA L5-20P 100-127Vac, 20a seven 100-127Vac, shared 15a32P1736NEMA L6-20P200-240Vac, 20a32P1737 CEE7-VII 220-240Vac, 16a32P1738 IEC 309-2P+Gnd 220-240Vac, 16aseven 220 -240Vac, shared 15a32P1739 SII 32 220-240Vac, 16a32P1740 CEI 23-16 220-240Vac, 16a32P1741 SABS 164 220-240Vac, 16a32P1742 BS 1363/A 220-240Vac, 13a seven 220-240Vac, shared 13a32P1745 NBR 6147 100-127Vac, 15a seven 100-127Vac, shared 15a32P1747 IRAM 2073 220-240Vac, 15a32P1743 AS/NZ 3112 220-240Vac, 15aseven 220-240Vac, shared 15a32P1744 GB 2099.1 220-240Vac, 15a32P1746 IS6538 220-240Vac, 16aFront-end PDUsPart Plug Type Source Circuit (50/60Hz) PDU OutputNumber(single phase 50/60Hz)32P1751 NEMA L5-30P 100-127Vac, 30a, single-phase three 100-127Vac, 20a each,shared 24a32P1766 NEMA L6-30P 200-240Vac, 30a, single-phase three 200-240Vac, 20a each,line-to-line with groundshare d 24a32P1767 IEC 309-2P+G 200-240Vac, 60a, single-phase three 200-240Vac, 20a each,line-to-line with groundshared 48a32P1752 IEC 309-2P+G 220-240Vac, 32a, single-phase three 220-240Vac, 16a each,shared 32a32P1754 IEC 309-2P+G 220-240Vac, 63a, single-phase three 220-240Vac, 16a each,shared 48aHigh Density PDUsPartNumberPlug Type Source Circuit (50/60Hz) PDU Output(single phase 50/60Hz)73P5856 IEC 309 P+N+G 220-240Vac, 63a, single-phase twelve 220-240Vac, 16a each,shared 63a73P5844 IEC 309 3P+N+G 380-415Vac, 32a, three-phasewyetwelve 220-240Vac, 16a each,shared 32a per four outlet phasegroupChapter 43. xSeries Rack Power Configurator 299


Country-Specific Considerations: Europe, Mid-East, Africa, Asia Pacific,parts of Latin AmericaNotes:C = Rack PDU with a 15a circuit breakerW = FE PDU with a 20a fuse per outletS = HD PDU with 20a circuit breaker per outletActual power values (watts) may vary based on actual sourcevoltage.A customer-supplied dedicated circuit is assumed.220-240Vac1 phase16avarious @Power Load CapacityC220v 230v 235v 240v1400W3300w 3450w 3525w 3600w@ country specific:IEC 309-2P+GCEE7-VIISII 32SABS 164BS 1363 w/fuseCEI 23-16etc.C220v 230v 235v 240v1400W2346w 2453w 2506w 2560w220-240Vac1 phase32a309-2P+Gshared 32aW1ph220v 230v 235v 240v7040w 7360w 7520w 7680wCC220v 230v 235v 240v1400W2346w 2453w 2506w 2560w220v 230v 235v 240v1400W2346w 2453w 2506w 2560wC220v 230v 235v 240v1400W3300w 3450w 3525w 3600w220-240Vac1 phase63a309-2P+Gshared 63aW1ph220v 230v 235v 240v9900w 10350w 10575w 10800wC220v 230v 235v 240v1400W3300w 3450w 3525w 3600w220v 230v 235v 240vC 1400W3300w 3450w 3525w 3600w300 Configuration and Options Guide


Refer to the Important Notices section for important noticesCountry-Specific Considerations: Europe, Mid-East, Africa, Asia Pacific,part of Latin AmericaNotes:C = Rack PDU with a 15a circuit breakerW = FE PDU with a 20a fuse per outletS = HD PDU with 20a circuit breaker per outletActual power values (watts) may vary based on actual sourcevoltage.A customer-supplied dedicated circuit is assumed.Power Load Capacity@ country specific:IEC 309-2P+GCEE7-VIISII 32SABS 164BS 1363 w/fuseCEI 23-16etc.220-240Vac1 phase63a309-P+N+G1phS220v 230v 235v 240v13860w 14490w 14805w 15120w220v 230v 235v 240v380-415Vac3 phasedelta309-3P+N+GS7040w 7360w 7520w 7680w220v 230v 235v 240v7040w 7360w 7520w 7680w32a220v 230v 235v 240v3ph7040w 7360w 7520w 7680w220v 230v 235v 240v21120w 22080w 22560w 23040wChapter 43. xSeries Rack Power Configurator 301


Country-Specific Considerations: JapanPower Cables(1) Device to Rack PDU power cableIEC C13 to C14, 10/15a cabletypical: 36L8886 (2.8m)requirement: C14 plug, long enough to reachavailable option: 94G7448 (14ft)(2) Rack PDU to wall line cordIEC C19 to country-specific connector, 16/20a,14ft (4.3m)(3) Rack PDU to UPS power cableIEC C19 to C20, 16/20a00N7700 (2m)provided with 37L6861 APC SU-5000RMB(4) Rack PDU to Front-end PDU power cableIEC C19 to C20, 16/20a00N7698 (1m) provided with the NetBAYFront-end PDUs00N7700 (2m) provided with the DPI Front-endPDUs(5) Front-end PDU to wall line cordspecial to country-specific connector, 30/32a,60/63a, 8.2ft (2.5m)(7) Device to High Density PDU power cableIEC C19 to C20, 16/20a, 2.5m(8) High Density PDU to wall line cordhardwired to country-specific connector, 60a,8.2ft (2.5m)(9) Device to FE- or HD-PDU power cableIEC C13 to C20, 10/15a cableoption: 23K4809 9ft (2.8m)(2) Line Cords: Rack PDU(5) Line Cords: Front-end PDU(8) Line Cords:High Density PDUDPI PDUsRack PDUsPart Plug TypeSource CircuitPDU OutputNumber(single phase 50/60Hz) (single phase 50/60Hz)32P1761 NEMA L5 -15P 100-127Vac, 15a six 100-127Vac, NEMA 5-15Rreceptacles, shared 12aseven 100-127Vac, shared 15aNEMA L5-20P 100-127Vac, 20a32P1736NEMA L6-20P 200-240Vac, 20a seven 200-240Vac, shared 15aFront-end PDUsPart Plug Type Source Circuit (50/60Hz) PDU OutputNumber(single phase 50/60Hz)32P1751 NEMA L5-30P 100-127Vac, 30a, single-phase three 100-127Vac, 20a each,shared 24a32P1766 NEMA L6-30P 200-240Vac, 30a, single-phase three 200-240Vac, 20a each,line-to-line with groundshare d 24a32P1767 IEC 309-2P+G 200-240Vac, 60a, single-phase three 200-240Vac, 20a each,line-to-line with groundshared 48aHigh Density PDUsPart Plug Type Source Circuit (50/60Hz) PDU OutputNumber(single phase 50/60Hz)73P5855 IEC 309 2P+G 200Vac, 60a, single-phase twelve 200Vac, 16a each, shared48a73P5847 IEC 309 3P+G 200Vac, 60a, three-phase delta twelve 200Vac, 16a each,shared 28a per four outlet phasegroupPower Load CapacityNotes:N = NEMA PDU has 12a circuit breakerC = Rack PDU has a 15a circuit breakerW = FE PDU has a 20a fuseS = HD PDU with 20a circuit breaker per outletActual power values (watts) may vary based on actual sourcevoltage.A customer-supplied dedicated circuit is assumed.Low Voltage100v1 phaseL5-15PN1200w15a100v1 phaseL5-20PC1500w20a302 Configuration and Options Guide


Refer to the Important Notices section for important noticesCountry-Specific Considerations: Japan, continuedPower Load CapacityNotes:N = NEMA PDU has 12a circuit breakerC = Rack PDU has a 15a circuit breakerW = FE PDU has a 20a fuseS = HD PDU with 20a circuit breaker per outletActual power values (watts) may vary based on actual sourcevoltage.A customer-supplied dedicated circuit is assumed.High Voltageshared 48a200v200v1 phase20aL6-20PC3000w200v1 phase60aIEC 3092P+G3-wireS1ph9600w9600w200vC2000 w200v1 phase30aL6-30Pshared 30aW1ph6000 wCC2000w2000 w200v3 phasedelta60aIEC 3093P+G4-wireshared 28a per phase5600wS 5600w5600w3ph16200w200vChapter 43. xSeries Rack Power Configurator 303


Rack PDU Power Cables1WallDevice2PDU31. Device to wall line cord2. Device to PDU/UPS power cable3. PDU to wall line cord4. PDU to Front-end PDU or UPS power cable5. Front-end PDU or UPS to wall line cordPDU Power Cord Plug Types4Front-end PDUor UPS5A B C D EIEC 320-C13/C14 IEC 320-C19/C20 IEC 309 2P+GIEC 309 2P+G IEC 309 3P+N+G250Vac/10aWW - intra-rack250Vac/16aWW - intra-rack32a single-phase60a/62a single-phase32a three-phaseF G H I J KNEMA 5-15PNEMA L5-20PNEMA L5-30PNEMA L6-20P NEMA L6-30P NEMA L21-30P125Vac/15aNorth America125Vac/20asingle-phase125Vac/30asingle-phase250Vac/20asingle-phase250Vac/30asingle-phase250Vac/30athree-phaseNorth AmericaNorth AmericaNorth America North America North AmericaN O P Q R SCEE7-VIIIEC 309 2P+GSI32CEI 23-16SABS 164BS 1363/Aw/ fuse250Vac/16aEurope (other)TAS/NZ 3112250Vac/16aDenmarkWspecial Burndyconnector250Vac/16aIsrael250Vac/16aItaly250Vac/16aSouth Africa250Vac/13aUK250Vac/15aAustralia / NewZealandNote: Match letters with Key columns in the following chart to identify power cables with these plugtypes.304 Configuration and Options Guide


Refer to the Important Notices section for important noticesPDU Power CablesOption Part NumberCable Part NumberPlug TypePlug TypeRating (a/v)Cable Length (m/ft)Country/CommentsRack PDUsDPI 100-127V NEMA PDU(US)32P1761 --- hardwired B NEMA L5-20P H 15a/125v 2.8m/9ft US, Canada, Mexico,...; includes one00N7700DPI Universal Rack PDU (US) 32P1736 12J511714F1553IEC 320-C19IEC 320-C19BBNEMA L5-20PNEMA L6-20PHJ18a/125v18a/250v4.3m/14ft4.3m/14ftUS, Canada, Mexico,...; includes one00N7700DPI Universal Rack PDU(Argentina)DPI Universal Rack PDU(Brazil)DPI Universal Rack PDU(Europe)DPI Universal Rack PDU(Denmark)DPI Universal Rack PDU(Israel)DPI Universal Rack PDU(Italy)DPI Universal Rack PDU(South Africa)32P1747 36L8885 IEC 320-C19 B IRAM 2073 M 15a/250v 4.3m/14ft Argentina; includesone 00N770032P1745 49P2115 IEC 320-C19 B NBR 6147 N 15a/125v 4.3m/14ft Brazil; includes one00N770032P1737 14F1554 IEC 320-C19 B CEE7-VII O 16a/250v 4.3m/14ft Europe (other);includes one 00N77032P1738 36L8823 IEC 320-C19 B IEC 309 2P+Gnd P 16a/250v 4.3m/14ft Denmark; includesone 00N770032P1739 14F1561 IEC 320-C19 B SI 32 Q 16a/250v 4.3m/14ft Israel; includes one00N770032P1740 14F1560 IEC 320-C19 B CEI 23-16 R 16a/250v 4.3m/14ft Italy; includes one00N770032P1741 14F1557 IEC 320-C19 B SABS 164 S 16a/250v 4.3m/14ft South Africa;includes one 00N7700DPI Universal Rack PDU (UK) 32P1742 12J5988 IEC 320-C19 B BS 1363/Aw/fuseT 13a/250v 4.3m/14ft UK; includes one00N7700DPI Universal Rack PDU(Aus/NZ)32P1743 14F1559 IEC 320-C19 B AS/NZ 3112 U 15a/250v 4.3m/14ft Australia/NewZealand; includesone 00N7700DPI Universal Rack PDU(China)32P1744 01K9852 IEC 320-C19 B GB 2099.1 V 15a/250v?4.3m/14ftChina; includes one00N7700DPI Universal Rack PDU(India)32P1746 49P2083 IEC 320-C19 B IS6538 W 16a/250v 4.3m/14ft India; includes one00N7700Front-end PDUsDPI Single-phase 30A FrontendPDU - LV (US)DPI Single-phase 30A FrontendPDU - HVDPI Single-phase 60A FrontendPDU - HVDPI Single-phase 32A FrontendPDU - HV (I)DPI Single-phase 63A FrontendPDU - HV (I)32P1751 74P4314 Burndy Y NEMA L5-30P H 30a/125v 2.8m/9ft US, Canada, Mexico,...32P1766 74P4312 Burndy Y NEMA L6-30P J 30a/208v 2.8m/9ft US, Canada, Mexico,...32P1767 74P4313 Burndy Y IEC 309 2P+Gnd C 60a/208v 2.8m/9ft US, Canada, Mexico,...32P1752 74P4315 Burndy Y IEC 309 2P+Gnd C 32a/250v 2.8m/9ft International32P1754 74P4311 Burndy Y IEC 309 2P+Gnd C 63a/250v 2.8m/9ft InternationalHigh Density PDUsDPI Single-phase 208V 60AHigh Density PDU (US)73P5855 --- hardwired ---IEC 309 2P+Gnd---C 60a/250v 4.3m/14ft US, Canada, Mexico,...DPI Three -phase 208V 60AHigh Density PDU (US)DPI Single-phase220-240V 63AHigh Density PDU(International)73P5847 --- hardwired ---73P5856 --- hardwired ---IEC 309 3P+G D 60a/250v 4.3m/14ft US, Canada, Mexico,...IEC 309 P+N+G E 63a/250v 4.3m/14ft InternationalChapter 43. xSeries Rack Power Configurator 305


DPI Three-phase 380-415V 32AHigh Density PDU(International)Power Cables73P5844 --- hardwired ---IEC 309 3P+N+G F 32a/415v 4.3m/14ft InternationalRack Power Cable Type A14optionRack Power Cable Type C12option94G6667 13F9961 IEC 320-C13 A NEMA 5-15P G 10a/125v 4.3m/14ft US, Canada, Mexico,...94G7448 36L8861 IEC 320-C13 A IEC 320-C14 A 10a/250v 4.3m/14ft Worldwide1.5m IEC 320-C13/C14 24P7469 36L8860 IEC 320-C13 A IEC 320-C14 A 10a/250v 1.5m/4.9ft Worldwide2.8m IEC 320-C13/C20 23K4809 74P4430 IEC 320-C13 A IEC 320-C20 B 10a/250v 2.8m/9ft Worldwide1m IEC power cable --- 00N7698 IEC 320-C19 B IEC 320-C20 B 16a/250v 1m/3.3ft Worldwide2m IEC power cable --- 00N7700 IEC 320-C19 B IEC 320-C20 B 16a/250v 2m/6.5ft WorldwidePower Cord Extension option 24P7864 11F0114 NEMA L6-30R K NEMA L6-30P K 30a/208v 1.8m/6ft US, Canada, Mexico,...Power Cord Extension option 24P7887 21H7693 IEC 309 2P+G C IEC 309 2P+G C 32a/350v 1.8m/6ft InternationalPower Cord Extension option 24P7888 88G4764 IEC 309 3P+G F IEC 309 3P+N+G F 32a/415v 1.8m/6ft InternationalNote: US = United States, I = International, LV = Low Voltage (100-127Vac), HV = High Voltage (200-250Vac), NEMA = NationalElectrical Manufacturers Association, IEC = International Electrotechnical Commission306 Configuration and Options Guide


Appendix A. Tape Drive AttributesLegendFHFull-high - approximate height 81mm/3.2inHHHalf-high - approximate height 41mm/1.6inSLSlim-line - approximate height 25mm/1inOption NumberDescriptionStorage InterfaceForm FactorMB/sec - Native/CompressedData/Cleaning Cartridges IncludedExt Tape Enclosures 1Tape Drives48P7042 20/40GB TR7 Internal IDE Tape Drive - 89mm (3.5in) SL or 133mm(5.25in) HH00N7991 20/40GB DDS/4 4mm Internal Tape Drive Ultra2 (16-bit) 89mm (3.5in) HH or 133mm(5.25in) HH71P9145 36/72GB DDS/5 Internal SCSI Tape Drive Ultra2 (16-bit) 89mm (3.5in) HH or 133mm(5.25in) HH2/4 1/1 -2.75/5.5 1/1 3510020,0034B0X3.5/7 0/1 3510020,0034B0X59P6719 40/80GB DLT VS80 Internal SCSI Tape Drive Ultra2 (16-bit) 133mm (5.25in) HH 3/6 0/1 3510020,0034B0X59P6745 80/160GB DLT VS160 SCSI Tape Drive Ultra160 (16-bit) 133mm (5.25in) HH 8/16 0/1 3510020,0034B0X59P6717 100/200GB LTO Tape Drive Ultra2 (16-bit) 133mm (5.25in) HH 7.5/15 0/1 0034B0X00N8016 100/200GB LTO Tape Drive Ultra2 (16-bit) 133mm (5.25in) FH 15/30 1/1 3503B1X0034B0X59P6736 160/320GB SDLT Tape Drive Ultra2 (16-bit) 133mm (5.25in) FH 16/32 1/1 0034BOX3503B1X59P6746 80/160GB VXA-2 SCSI Tape Drive Ultra2 (16-bit) 133mm (5.25in) HH 6/12 1/1 0034BOX3510020 259P6744 200/400GB LTO Full-High Tape Drive Ultra2 (16-bit) 133mm (5.25in) FH 35/70 1/1 0034BOX3503B1XAssociated Options00N795668-pin External Multimode LVD/SE SCSITerminatorTape AutoloadersLVD/SE (16-bit) External - - 351002000N7992 120/240GB DDS/4 Tape Autoloader Ultra2 (16-bit) 133mm (5.25in) FH 3/6 5/1 3503B1X36232LX200/400GB 2U LTO Generation 2 TapeUltra160 (16-bit) 2U Rack 35/70 1/1 -Autoloader 3623 Model 2LX 3360716X3607 Series 1760GB/1.8TB SDLTpro TapeAutoloaderUltra2 (16-bit) 2U Rack 11/22 1/1 -360726X 3607 Series 1.6TB/3.2TB LTO Tape Autoloader Ultra2 (16-bit) 2U Rack 15/30 1/1 -18P9133 TotalStorage Ultrium LVD Tape Drive 3580Ultra160 16-bit 5Stand-alone or 5U Rack 35/70 1/1 -Model L23 4307


3581L28TotalStorage Ultrium LVD Tape 2U Autoloader Ultra160 16-bit 7Stand-alone or 2U Rack 35/70 1/1 -3581 63581F28TotalStorage Ultrium Fibre Tape 2U Autoloader 2GB Fibre3581 6 ChannelExternal Tape EnclosuresStand-alone or 2U Rack 35/70 1/1 -45591UX NetBay 1U xSeries Tape Enclosure8 Ultra160 (16-bit) 1U Rack4559HHX Half-High SCSI Tape Enclosure 9 Ultra160 (16-bit) Desktop or Rack Shelf(2.52in tall)- - -0034B0X 2NetBAY Tape Enclosure (Rack Mount) Ultra2 (16-bit) 4U Rack - 1/1 -4559FHX Full-High SCSI Tape Enclosure10 Ultra160 (16-bit) Desktop or Rack Shelf(4.41in tall)- - -3510020 11, 12External Half High SCSI Storage Enclosure Ultra2 (16-bit) Desktop - - -3503B1X 13Full-High SCSI Tape Enclosure Ultra2 (16-bit) Desktop or 3U Rack - - -External Tape Libraries 144560SLX SDLT/LTO Modular Tape Library15 Ultra2 (16-bit) 5U Rack 16/32 (allSDLT); 15/300/0 17 -(all LTO) 161. To determine cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section and thedesired enclosure then refer to Appendix D: Cables - Storage Units - Controllers. For installation of an internal tape drive into a server, see the appropriatesystem section.2. 4U rack-mounted enclosure that supports four full-high or six half-high tape drives. The backplate includes six 0.8mm VHDCI external connectors forattachment of up to six servers. Internal connection of tape drives requires the single-drop terminated LVD SCSI cable that ships with the tape drive, whichalso provides termination for the SCSI bus. A single 320w power supply with a low voltage power cord is standard. An external SCSI storage cable is notprovided. Refer to Appendix D: Cables - Storage - Controllers to select a supported cable.3. Model 3623-2LX has a tape capacity of eight data cartridges providing a media capacity of up to 1.6 TB (3.2TB compressed) data storage per unit. SCSIcontroller and cable are not included. Note tape drive’s SCSI interface and refer to the ‘SCSI Cables, Storage Units, Controllers’ appendix for appropriatecable. Installing the 3623 on the same SCSI bus as on the SCSI devices may impact performance of those devices. Ships with an external 3m SCSI cable anda 2.8m/9ft, 100-120V, IEC 320-C13 to NEMA 5-15P line cord.4. Option P/N 18P9133 ships with a U.S./Canada 110v power cord. Option P/N 18P9484 is the same unit with a U.S./Canada 250v power cord.5. Rack installations require the 5U rack-mount kit P/N 18P9012.6. Does not ship with a power cord.7. Rack installations require the 2U rack-mount kit P/N 24R0998.8. 1U rack-mounted enclosure that supports one or two half-high tape drives. It allows each of these tape drives to be independently attached to asupported xSeries server or both to be daisy-chained to a single server. Includes two 3m 68-pin to.8mm VHDCI external cables.9. Desktop or rack tape enclosure which supports a single 133mm (5.25in) half-high tape drive. Requires a fixed shelf if installed in a rack (allow anadditional 1U for fixed shelf). Includes a power cord and an external 68-pin to 0.8mm VHDCI SCSI cable.10. Desktop or rack tape enclosure which supports a single 133mm (5.25in) full-high tape drive. Requires a fixed shelf if installed in a rack (allow anadditional 1U for fixed shelf). Includes a power cord and an external 68-pin to 0.8mm VHDCI SCSI cable.11. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).12. Black desktop tape enclosure that supports a single 133mm (5.25in) half-high (HH) tape drive. Internal and external connectors are 68-pin high-densitysupporting LVD. External cables are not included. Refer to Appendix D: Cables - Storage Units - Controllers to select a supported cable.13. Black desktop or 3U rack tape enclosure supports a single 133mm (5.25in) full-high LVD tape device including DLT tape drives. Requires a fixed shelf ifinstalled in a rack (allow additional 1U for fixed shelf). Includes a 90w power supply, cooling fan, external terminator, power cord (country-specific), and2m 68-pin to 0.8mm external cable.14. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.15. 4560 Automation Tape Enclosure Library supports either LTO or SDLT (or both if the application software supports mixed media and the drives andmagazines are matched). Up to eight units can be stacked. Two magazines and two drive sleds can be installed in each unit. An external LVD SCSI cablewith 0.8mm VHDCI connectors at each end ships standard with the library unit. A single 300w power supply with an IEC 320-C13 to NEMA 5-15P lowvoltage power cord is standard.16. Data transfer speed is rated separately for LTO and SDLT media. Compressed speed may be less than the maximum rate provided.17. LTO and SDLT data cartridges are not provided standard. Cleaning cartridges are shipped standard with LTO and SDLT drive sleds.308 Configuration and Options Guide


Appendix B. Tape Library AttributesSCSI Interface and Cable LegendFMFemale - ExternalMale - External68 16-bit, 68-pin High Density connector0.8 16-bit, 68-pin Very High Density Connection Interface (VHDI) 0.8mm connectorSESingle-ended SCSIHVDHigh Voltage Differential SCSILVDLow Voltage Differential SCSIPart NumberDescriptionStorage InterfaceForm FactorExt Cable Incl (length)Controllers InclData Cartridges (Std/Max)Cleaning Cartridges (Std)Cartridge Mags (Std/Max)Quantity of Drives (Std/Max)Max Storage - Native/CompressedMB/sec - Native/Compressed 14560 Automation TapeEnclosure Library4560SLXSDLT / LTO Modular Tape Library LVD 5U Rack M0.8-M0.8(5U rack) 2 (4m)N0/30 (LTOonly);0/26(SDLTonly)- 0/2 0/2 4.16TB/ 16/328.32TB (all SDLT);(all SDLT); 15/303TB/6TB(all LTO) 3 (all LTO) 359P6657 4Modular Fibre Channel Option LVD - M0.8-M0.8(0.5m)- - - - - - -59P6658Modular LTO Drive UpgradeLVD - JumperOption 5 (0.5m)N - 1 - - - 15/30 959P6659Modular LTO Cartridge Magazine LVD - - - 0/15 - - - 3TB/6TB 3 -Option 659P6660Modular SDLT Drive UpgradeLVD - JumperOption 5 (0.5m)N - 1 - - - 16/32 359P6661Modular SDLT Cartridge Magazine LVD - - - 0/13 - - - 4.16TB/ -Option 7 8.32TB 359P6662 Modular Elevator Link Option 8 LVD - - - - - - - - -59P6663Modular Elevator Link Extension LVD - - - - - - - - -Option 971P9146 LTO Generation 2 Drive Sled10 LVD - - - - - - - - -08L9120 LTO Data Cartridge LVD - - - - - - - 100GB/200GB35L1119 SDLT Data Cartridge LVD - - - - - - - 160GB/320GB--Magstar Tape Systems3570C21 11Magstar MP 3570 Tape Subsystem HVD 6U Rack (4.5m) Y 1/20 1 2/2 1/2 100GB/300GB3570C22 Magstar MP 3570 Tape Subsystem 11 HVD 6U Rack (4.5m) Y 1/20 1 2/2 2/212 100GB/300GB7/157/15309


08L6517 133570 Adapter Card Kit HVD - (4.5m) Y - - - - - -08L6480 14Second “C” Drive for C21 HVD - - N - - - - - 7/15Magstar MP Media 1505H2462Magstar MP Fast Access Linear Tape - - - - - - - - - -Cartridge, B-format 1605H2463 Magstar MP Cleaning Cartridge - - - - - - - - - -08L6187Magstar MP Fast Access Linear TapeCartridge, C-formatTotalStorage Ultrium TapeLibrary 3582- - - - - - - - - -18P9212TotalStorage Ultrium LVD TapeLibrary 3582 Model L23 17Ultra160(16-bit) 18Standaloneor4URack 19NotincludedN 1/23 1 2/2 1/2 4.8TB/9.6TB35/7018P9337TotalStorage Ultrium LVD TapeLibrary 3582 Model F23 202GbFibreChannelStandaloneor4URack 19NotincludedN 1/23 1 2/2 1/2 4.8TB/9.6TB35/7018P923418P923518P9236Additional 3582 Ultrium 2 LVD TapeDriveAdditional 3582 Ultrium 2 HVD TapeDriveAdditional 3582 Ultrium 2 Fibre TapeDrive- - - - - - - - - -- - - - - - - - - -- - - - - - - - - -18P9237 3582 Stand-alone Cover Kit - - - - - - - - - -18P9238 3582 Magazine Kit with Dust Cover - - - - - - - - - -18P9239 3582 Remote Management Unit - - - - - - - - - -09K9310 Netfinity 2m Ultra2 SCSI Cable - - - - - - - - - -03K9311 Netfinity 42m Ultra2 SCSI Cable - - - - - - - - - -01K8027 2m External 0.8mm SCSI Cable - - - - - - - - - -19K1247 1m LC-LC Fibre Channel Cable - - - - - - - - - -19K1248 5m LC-LC Fibre Channel Cable - - - - - - - - - -19K1249 25m LC-LC Fibre Channel Cable - - - - - - - - - -19K1250 LC-SC Fibre Channel Cable - - - - - - - - - -08L9870 LTO Ultrium 200GB Data Cartridge - - - - - - - - - -71P9027LTO Ultrium 200GB Data Cartridge(20-pack)- - - - - - - - - -35L2086 LTO Cleaning Cartridge - - - - - - - - - -1. Transfer rates are for single SCSI channel configurations. Tape libraries utilizing split library or dual host configurations may obtain higher rates. Datacompression typically provides a 2X improvement in capacity and transfer rate, but since data compression is affected by many factors, actual improvementsmay be more or less than 2X.2. SDLT/LTO Tape Library supports either LTO or SDLT (or both if the application software supports mixed media and the drives and magazines arematched). Up to eight units can be stacked. Two magazines and two drive sleds can be installed in each unit. An external LVD SCSI cable with 0.8mm VHDCIconnectors at each end ships standard with the library unit. A single 300w power supply with an IEC 320-C13 to NEMA 5-15P low voltage power cord isstandard. Attaches to a single host server using a SCSI connection or to either a Fibre Channel switch or single server through a Fibre Channel connection if aModular Fibre Channel Option is installed.3. Data transfer speed and capacity are rated separately for LTO and SDLT media. Compressed speed and data capacity may be less than the maximumindicated.4. Ships with external LVD SCSI cable with 0.8mm VHDCI connector for connection to the tape drive. Requires a short- or long-wave SFP Module (P/N19K1271, 2) for connection to Fibre Channel cable. Supports three to four drive sleds (or two layers) only. Fibre Channel attachment includes either a singleserver using a FC2-133 Host Bus Adapter or a Fibre Channel switch.5. Ships with external LVD SCSI cable. Supported configurations are none, one or two drives. When a drive sled is not installed, the library unit must be cabledto another unit that contains at least one drive upgrade option. The Modular LTO Drive Upgrade Option includes one LTO Cleaning Cartridge (P/N 08L9124)and the Modular SDLT Drive Upgrade Option includes one SDLT Cleaning Cartridge (P/N 19P4357).6. One or two magazines are supported. Up to 15 tape data cartridges (P/N 08L9120) are supported in each magazine.7. One or two magazines are supported. Up to 13 tape data cartridges (P/N 35L1119) are supported in each magazine.8. Required to connect two library units.9. Required to connect each additional library unit (from three through eight).10. Provides a means for mounting LTO Generation 2 (LTO2) SCSI tape drives in the 4560SLX library.11. Includes rack mounting hardware and two power cords (120V and 250V). Models B22 and C22 include an additional two power cords.12. The two tape drives are daisy-chained on the same SCSI bus with an included 0.5m SCSI cable. Dual Host and Split Library configurations require 3570Adapter Card Kit (P/N 08L6517).13. Required for Dual Host or Split Library configurations with 3570B2x or 3570C2x containing two drives.14. Required for either dual host or split library operation. Should be installed by qualified service personnel.15. Magstar MP Media can be ordered by calling 888-IBM-MEDIA or 888-426-6334 in the US, Canada, or Puerto Rico.310 Configuration and Options Guide


Refer to the Important Notices section for important notices16. B-format tape cartridges can be used in either Magstar MP 3570 Model B or C tape drives.17. Option P/N 18P9212 ships with a U.S./Canada 110v power cord. Option P/N 18P9522 is the same unit with a U.S./Canada 250v power cord.18. Support provided for HVD installations.19. Rack mount kit ships with unit. Stand-alone kit is optional.20. Option P/N 18P9337 ships with a U.S./Canada 110v power cord. Option P/N 18P9529 is the same unit with a U.S./Canada 250v power cord.Appendix B. Tape Library Attributes 311


312 Configuration and Options Guide


Appendix C. UPS Runtime Estimate (minutes)Servers# Pwr CordsStd/MaxWatts LoadTyp/Max 1xSeries 205 21/1 340/4852xSeries 225 (single power supply) 1/1 420/600xSeries 225 (redundant power supplies) 2 2/2 350/500xSeries 2352 1/2 560/800xSeries 255 (two power supplies) 2 2/2 370/5302xSeries 255 (four power supplies) 2/2 530/10002xSeries 305 1/1 140/2002eServer 325 1/1 400/5872xSeries 335 1/1 245/3402xSeries 345 1/2 350/5002xSeries 382 2/2 700/1000xSeries 4452 2/2 800/950Other Devices2RXE-100 (8684-1RX) 2/2 260/370FAStT200 Storage Server (35421RU) 2 2/2 275/390FAStT200 HA Storage Server (35422RU) 2 2/2 275/390FAStT600 Storage Server (172260U) 2 2/2 390/5572FAStT700 Storage Server (17421RU) 2/2 275/3902FAStT900 Storage Server (174290U) 2/2 275/3902FAStT EXP500 Storage Expansion Unit (35601RU) 2/2 245/3502FAStT EXP700 Storage Expansion Unit (17401RU) 2/2 245/350TotalStorage SAN Switch F08, 8-port (3534F08) 1/1 50/n/aSAN Fibre Channel Switch, 16-port (2109F16) 1/2 200/n/aNetBAY Tape Enclosure (0034B0X) 1/1 320/457SDLT/LTO Modular Tape Library (4560SLX) 1/1 300/4301. This table represents general guidelines for selecting the appropriate UPS based on minimum andtypical runtime estimates. A ‘maximum configuration’ load will result in ‘minimum’ UPS runtime.‘Typical’ loads are based on a production system running at approximately 70% of maximum capacity(based on the power delivered to the device from the power source, i.e., 70% of the value provided as amaximum equals the rating of the power supply). The ‘typical’ loads represent a more likelyconfiguration; therefore, they provide a more likely estimate of runtime. The values listed as typicalgenerally are equal to the rating of the power supply. Since power supplies operate at 70% of load, thesystem power supplies are actually operating at 70% of the values listed, though the power required fromthe source is what is listed. Customer environments are unique and are unlikely to be preciselyrepresented by any of the specific entries in the table.2. Power-Factor Corrected (PFC) power supply.313


TowerRack MountedINT’LP/NSU-700iNET94G4073SU-1000iNET94G4074SU-1400iNET94G4075SU-2200iNET94G40762USU-1400RMiB32P1022 1SU-3000RMiB94G6677SU-5000RMiB37L6862USP/NSU-700NET94G3134SU-1000NET94G3135SU-1400NET94G3136NotAvailable2U SU-1400RMB32P1020SU-3000RMB94G6676SU-5000RMB37L6861UPS AttributesCommunicationsLinks to Servers1 1 1 1 1 3 3Color black black black white black black blackEIA Height - - - - 2U 3U 5UInt’l Models50 or 60Hz, singlephase, VAC: 2, 310-Amp, IEC 320-C13 (Device)receptacles16-Amp, IEC 320-C19 (PDU)receptaclesLine CordReceptacle (IEC320-)220-240(xxx) 220-240(xxx) 220-240(xxx) 220-240(xxx) 220-240(xxx) 220-240(xxx) 220-240(xxx)4 4 4 8 4 8 8- - - 1 - 1 2C14 C14 C20 C20 C14 C20 TB 4US Models50 or 60Hz, single120 (120) 120 (120) 120 (120) - 120 (120) 120 (120) 200-220 (208)phase, VAC: 2Receptacles(NEMA 5-15R)10-Amp, IEC 320-C13 (Device)receptacles16-Amp, IEC 320-C19 (PDU)receptaclesLine Cord Length,NEMA Plug4 6 6 - 6 8 -- - - - - - 8- - - - - - 2 56ft, 5-15P 6ft, 5-15P 6ft, 5-15P - 6ft, L5-15P 6ft, L5-30P 8ft, L6-30P1. Two IEC power cables are provided to attach devices to the UPS outlets, which are 1.8m long with IEC 320-C13 / C14 connectors.2. How-to-Read example for 200-240(208): Input VAC is 200-240 as is the UPS output when electric service is active. When electric service is interrupted andthe UPS is on battery, the UPS output is 208 VAC.3. Battery output may be set to 220, 225, 230, or 240 VAC.4. SU-5000RMiB (P/N 37L6862) contains a Terminal Block (TB) for direct attachment to an electrical source by qualified personnel.5. Two PDU jumper cables ship with the UPS for attachment from the IEC 320-C19 receptacles to Power Distribution Units (PDUs) with C20 inlets.Total Configuration Runtime EstimatorSteps:1. Identify the devices contained in the configuration.2. Sum the load (watts) of all devices in the configuration. Use either Maximum Load for minimumruntime or Typical Load for typical runtime.3. Find the Total Configuration Load in the table.4. Select the most appropriate UPS model to achieve the desired runtime.314 Configuration and Options Guide


Refer to the Important Notices section for important noticesTotal Configuration Runtime Estimator (time in minutes) 1TowerRack MountInt’l PartNumberSU-700iNET94G4073SU-1000iNET94G4074SU-1400iNET94G4075SU-2200iNET94G4076SU-1400RMiB94G66752U SU-1400RMiB32P1022SU-3000RMiB94G6677SU-5000RMiB37L6862UnitedStatesPartNumberSU-700NET94G3134SU-1000NET94G3135SU-1400NET94G3136NotAvailableSU-1400RMB94G66742U SU-1400RMB32P1020SU-3000RMB94G6676SU-5000RMB37L6861TotalLoad(Watts)RuntimeMinutesRuntimeMinutesRuntimeMinutesRuntimeMinutesRuntimeMinutesRuntimeMinutesRuntimeMinutesRuntimeMinutes200 22 38 62 130 45 45 104 240250 17 28 43 104 34 34 84 200300 12 22 34 85 25 25 70 166350 9 18 29 71 22 22 58 145400 7 14 23 65 18 18 52 125450 5 12 20 52 15 15 45 110500 - 11 18 43 13 13 38 97550 - 9 16 38 11 11 35 87600 - 8 13 34 10 10 31 76650 - 7 12 31 9 9 29 68700 - 6 11 28 8 8 26 63750 - - 10 25 8 8 24 59800 - - 9 23 7 7 22 55850 - - 8 21 7 7 20 51900 - - 7 19 6 6 18 47950 - - 6 18 5 5 17 431000 - - - 17 - - 16 391100 - - - 15 - - 14 341200 - - - 13 - - 12 311300 - - - 11 - - 10 281400 - - - 9 - - 9 251500 - - - 9 - - 8 221600 - - - 8 - - 8 201700 - - - - - - 7 181800 - - - - - - - 17Appendix C. UPS Runtime Estimate (minutes) 315


1900 - - - - - - - 142000 - - - - - - - 122100 - - - - - - - 112200 - - - - - - 112300 - - - - - - - 102400 - - - - - - 102500 - - - - - - - 92600 - - - - - - 92700 - - - - - - - 82800 - - - - - - - 81. Data provided by APC.Steps:1. Identify the devices contained in the configuration.2. Sum the load (watts) of all devices in the configuration. Use either Maximum Load for minimumruntime or Typical Load for typical runtime.3. Find the Total Configuration Load in the table.4. Select the most appropriate UPS model to achieve the desired runtime.InternationalPart NumberUPS3000XLV32P1681UPS3000XHVvariousUPS Extend RunBattery Pack32P1692United StatesPart NumberUPS3000XLV2130R30UPS3000XHV2130R31UPS Extend RunBattery Pack32P1692UPS AttributesCommunications Links to Servers Serial/USB/Enet Serial/USB/Enet -Color black black blackEIA Height 2U 2U 2UInt’l Models50 or 60Hz, single phase, VAC: 120(120) 1 220-240(xxx) 1, 2 -10-Amp, IEC 320-C13 (Device) receptacles 6 7 -16-Amp, IEC 320-C19 (PDU) receptacles - 1 3 -Receptacles (NEMA L5-20R) 1 4 - -Line Cord Length, NEMA Plug 9ft, L5-30P - -Line Cord Receptacle (IEC 320-) - C20 -US Models50 or 60Hz, single phase, VAC: 120(120) 1 200-240(208) 1 -Receptacles (NEMA 5-15R) - - -Receptacles (NEMA L5-20R) 1 4 - -10-Amp, IEC 320-C13 (Device) receptacles 6 5 7 6 -16-Amp, IEC 320-C19 (PDU) receptacles - 1 3 -Line Cord Length, NEMA Plug 9ft, L5-30P - -Line Cord Receptacle (IEC 320-) - C20 6 -316 Configuration and Options Guide


Refer to the Important Notices section for important noticesNote: If the Total Configuration Load is greater than the entries above, split the load across two ormore UPS units.1. How-to-Read example for 200-240(208): Input VAC is 200-240 as is the UPS output when electric service is active.When electric service is interrupted and the UPS is on battery, the UPS output is 208 VAC.2. Battery output may be set to 220, 225, 230, or 240 VAC.3. One 2m PDU jumper cable ships with the UPS for attachment from the IEC 320-C19 receptacles to a PowerDistribution Units (PDUs) with C20 inlets.4. Includes L5-20P to L5-15R adapter cable.5. Four IEC power cables are provided to attach devices to the UPS outlets, which are 2m long with IEC 320-C13 /C14 connectors.6. US line cord is 8ft (2.5m) long with NEMA L6-20P power plug.Steps:1. Identify the devices contained in the configuration.2. Sum the load (watts) of all devices in the configuration. Use either Maximum Load for minimumruntime or Typical Load for typical runtime.3. Find the Total Configuration Load in the table.4. Select the most appropriate battery pack column to achieve the desired runtime.Total Configuration Runtime Estimator (time in minutes) 1Number of Battery PacksInternalOnly+1 +2 +3 +4Total Load(Watts)RuntimeHours /MinutesRuntimeHours /MinutesRuntimeHours /MinutesRuntimeHours /MinutesRuntimeHours /Minutes200 1 / 45 7 / 5 13 / 32 19 / 50 24 / 16250 1 / 15 5 / 48 11 / 57 17 / 36 20 / 56300 1 / 9 3 / 58 9 / 42 14 / 36 17 / 36350 60 3 / 24 8 / 43 13 / 15 16 / 42400 50 2 / 50 6 / 55 10 / 55 15 / 3450 45.5 2 / 41 5 / 59 9 / 50 14 / 0500 41.8 2 / 37 5 / 12 8 / 53 12 / 32550 39 2 / 33 4 / 36 8 / 0 11 / 7600 35.5 2 / 24 3 / 37 6 / 29 8 / 55650 33.8 2 / 19 3 / 14 5 / 51 8 / 19700 30.6 2 / 12 3 / 1 5 / 10 7 / 51750 28 2 / 7 2 / 52 4 / 47 7 / 30800 23.7 1 / 54 2 / 42 3 / 57 6 / 7850 21.9 1 / 48 2 / 38 3 / 29 5 / 23900 20 1 / 40 2 / 34 3 / 13 4 / 58950 18.1 1 / 30 2 / 30 3 / 0 4 / 361000 15.5 1 / 20 2 / 21 2 / 52 3 / 461100 14.4 1 / 8 2 / 15 2 / 50 3 / 351200 13 1 / 1 2 / 8 2 / 43 3 / 91300 12.3 57.5 2 / 4 2 / 39 3 / 01400 10.9 53 1 / 54 2 / 32 2 / 491500 10 51.4 1 / 48 2 / 28 2 / 451600 8.4 48 1 / 35 2 / 19 2 / 391700 7.7 46.3 1 / 30 2 / 13 2 / 371800 6.85 42 1 / 15 2 / 0 2 / 30Appendix C. UPS Runtime Estimate (minutes) 317


1900 6.5 39.7 1 / 6 1 / 54 2 / 242000 6.2 37 1 / 2 1 / 48 2 / 182100 5.7 32.4 58 1 / 37 2 / 92200 5.5 30.8 56.3 1 / 33 2 / 7.52300 5.1 28.9 53.9 1 / 25 2 / 32400 4.9 28.2 53 1 / 21 1 / 592500 4.45 26.9 50.7 1 / 13 1 / 502600 4.2 26 49.4 1 / 9 1 / 462700 4 25.1 48.3 1 / 6 1 / 422800 3.8 24.2 47 1 / 2.5 1 / 392850 3.6 23.4 46 1 / 0 1 / 36Note: If the Total Configuration Load is greater than the entries above, split the loadacross two or more UPS units.1. Data provided by APC.318 Configuration and Options Guide


Appendix D. SCSI Cables - Storage Units - ControllersIdentify Desired Controller Row and Storage Unit Column. The intersection of row and column containsthe cable group letter which supports the connection. Go to the cable group under the correspondingstorage unit for specific support. Read all Notes for row, column, and any cable group footnotes.LegendFMIFemale - ExternalMale - ExternalInternal68 16-bit, 68-pin High Density connector50 8-bit, 50-pin Centronix Connector0.8 16-bit, 68-pin Very High Density Connection Interface (VHDCI) 0.8mmconnector16 16-bit, 68-pin connector8 8-bit, 50-pin connectorStorage Unit35311RU35100203503B1X35510010034B0X360716X360726X4560SLX1Max MB/sec. 160 - - - 80 80 80 80LVDS X - X - X X X XConnectorTypeF0.8 F68 F68 F0.8 F0.8 F68 F68 F0.8DescriptionOption NumberMax/Channel (MB/sec) 1LVDSConnector Type/ Max--------RAID StorageControllersServeRAID-4H Ultra160 SCSIControllerServeRAID-4Mx Ultra160SCSI AdapterServeRAID-4Lx Ultra160SCSI Adapter II- - - -37L6889 160 X F0.8/4 A - - - - - - -06P5736 160 X F0.8/2 A - - - - - - -06P5740 160 X F0.8/1 A - - - - - - -2ServeRAID-5i Controller 25P3492 160 X F0.8/1 A B B A A - - -2ServeRAID-6i+ Controller 13N2190 320 X F0.8/0 A B B A A - - -ServeRAID-6M Controller(256MB Cache)ServeRAID-6M Controller(128MB Cache)02R0988 320 X F0.8/2 A - - - - - - -32P0033 320 X F0.8/2 A - - - - - - -319


Storage Unit35311RU35100203503B1X35510010034B0X360716X360726X4560SLX1 Max MB/sec. 160 - - - 80 80 80 80LVDS X - X - X X X XConnectorTypeF0.8 F68 F68 F0.8 F0.8 F68 F68 F0.8DescriptionOption NumberMax/Channel (MB/sec) 1LVDSConnector Type/ Max--------Ultra320 SCSI Controller - - - -Single Channel Ultra320 SCSIController71P8594 320 X F0.8/1 - B B A A B B AxSeries 225 3 Onboard 320 X F0.8/1 A 4 B - - - B - -xSeries 235 3 Onboard 320 X F0.8/1 A 4 B B A A B B -xSeries 345 Onboard 320 X F0.8/1 A 4 B B A A B B AxSeries 382 Onboard 320 X F0.8/1 A - - - - - - -xSeries 445 Onboard 320 X F0.8/1 - B B - A B B AxSeries 450 Onboard 320 X F0.8/1 - - B A A B B AUltra160 SCSIControllersPCI Wide Ultra160 SCSIAdapter- - - -19K4646 160 X F0.8/1 - B B A A B B AxSeries 2553 Onboard 160 X F0.8/1 - - B A A B B -xSeries 440 Onboard 160 X F0.8/1 - - B A A - B ANo Onboard ExternalPort 5 - - - -xSeries 205 Onboard - - n/a - - - - - - - -xSeries 305PCIadapter- - n/a - - - - - - B -xSeries 335 Onboard - - n/a - - - - - - B -xSeries 360 Onboard - - n/a - - - - - - B -Cable Group A (M0.8-M0.8)- - - -Netfinity 2m Ultra2 SCSI 03K9310 - X M0.8-M0.8 X 7 - - X 8 X 8 - - X 9Cable 6Netfinity 4.2m Ultra2 SCSI 03K9311 - X M0.8-M0.8 X 7 - - X 8 X 8 - - X 9Cable 6Cable Group B (M68-M0.8)2m External 0.8mm SCSICable- - - -01K8027 - - M68-M0.8 - X 8 X 8 X 8 X 9 X 9 -320 Configuration and Options Guide


Refer to the Important Notices section for important noticesStorage Unit35311RU35100203503B1X35510010034B0X360716X360726X4560SLX1 Max MB/sec. 160 - - - 80 80 80 80LVDS X - X - X X X XConnectorTypeF0.8 F68 F68 F0.8 F0.8 F68 F68 F0.8DescriptionOption NumberMax/Channel (MB/sec) 1LVDSConnector Type/ Max--------Cable Group G (Other)68-pin External MultimodeLVD/SE SCSI Terminator00N7956 - - M68 - - - - - - - -1. Maximum supported speeds may be limited by installation of lower speed devices, controllers or cable lengths greater than two meters.2. ServeRAID-5i or -6i+ neither cable internally nor have their own external connector. In systems with an external SCSI connector cabled to channel B ofthe integrated storage controller, ServeRAID-5i or -6i+ can attach through the integrated controller to external SCSI HDDs (EXP300). ServeRAID-5i or -6i+support some tape drives when installed in an available internal media bay connected to channel B of a dual-channel integrated controller or installed in asupported external tape enclosure. When the RAID controller is configured, channel B is designated as a standard SCSI channel in order to support thetape drives.3. Requires External SCSI Interface Kit (P/N 32P8164) or Ultra320 External SCSI Connector Cable Option (24P7973) to enable the external 0.8mm VHDCIport.4. Support for EXP300 connected to the external SCSI port requires installation of ServeRAID-5i (P/N 25P3492) and availability of one channel of theintegrated Ultra320 controller.5. No external SCSI port is available on these systems. A supported optional controller must be installed. See the systems section to determine whichcontrollers and external storage units are supported then refer back to this table for cable requirements using the controller row.6. Supports attachment to Ultra2 or single-ended SCSI controllers with operational speeds of up to Ultra2. Controller, storage unit, cable length or storagedevice limitations may apply (see Max MB/sec row and column above).7. EXP300 (P/N 35311RU) includes a single 2M Ultra2 SCSI cable similar to Netfinity 2M Ultra2 SCSI Cable (P/N 03K9310).8. External storage cable is not included standard with the enclosure.9. External storage cable is included standard with the enclosure.Appendix D. SCSI Cables - Storage Units - Controllers 321


322 Configuration and Options Guide


Appendix E. System Management OverviewIBM system management solutions allow you to run your business-critical applications using innovativehardware technology that prevents most outages and recovers rapidly from the few that do occur. Thistechnology makes xSeries simpler to service and easier to manage.This section shows the available range of standard and optional system management processors anddescribes the features and configuration process for each. This section further demonstrates how theseservice processors can be interconnected to form a communication network for alerting and monitoring awide range of system functions and hardware conditions.Key to abbreviationsASMPISMPASMARSARSA IIASMICAdvanced System Management ProcessorIntegrated System Management ProcessorAdvanced System Management PCI AdapterRemote Supervisor AdapterRemote Supervisor Adapter IIAdvanced System Management Interconnect Cable KitGeneral Notes:Refer to IBM’s website for firmware updates.An advanced system management interconnect network is configured with at least one focal point(generally an ASMA, RSA or RSA II in a server) that provides Ethernet LAN and serial connections formanagement and alerting, which are shared between all the members of an interconnect network.Up to 24 ISMPs and/or RSAs may be interconnected in a single ASM interconnect network (includingstandard and optional processors).Up to 12 ASMPs and/or ASMAs may be interconnected in a single ASM interconnect network (includingstandard and optional processors). Up to 12 additional ISMPs and/or RSAs may be added to an ASMinterconnect network containing 12 or less ASMPs and/or ASMAs.An ASM interconnect network may contain an aggregate connection length of no more than 91.4m (300ft).A customer-supplied Cat5 Ethernet cable is required for each interconnection.Connecting servers that do not have two external RS-485 ports as an ASM interconnect network requiresAdvanced System Management Interconnect Cable Kit (P/N 03K9309). RSA and ASMA do not include thisoption when shipped standard with a system.System Management Support by ServerOnboard PCI Adapter CablingxSeries Server ASMP 1 ISMP 1 ASMA 2, 3, 4 RSA 3, 5, 6 RSA II ASMIC 7x205 - - - 8optional optional optionalx206 - - - - optional optionalx225 (8649) - - - optional optional optionalx235 - standard 9, 10 - 11, 12optional optional standardx255 - standard 9, 10 - 11, 12optional optional standardx305 - - - optional8 optional optionalx306 - - - - optional optionalx335 - standard 10, 13 - optional13 optional standard323


x345 - standard 9, 10 - 11, 12optional optional standardx365 - - - - standard cable kitx382 - - - - - -x445 - - - standard optional cable kitx455 - - - standard - cable kite325 - - - - - -1. This service processor is integrated into the system planar (onboard).2. This adapter cannot be the remote management focal point in an interconnect network containing an RSA or ISMP. The ASM PCI adapter is only used asthe focal point when an RSA or ISMP is not present (or not functioning) in the network. The focal point must be the latest generation of service processorconnected within the network.3. Adds alternate Ethernet LAN and serial connections for support when the operating system is not available.4. Advanced System Management PCI Adapter includes the following: adapter card, dual serial cable, ASM interconnect dual pigtail cable, ASMinterconnect single pigtail cable, internal ASM interconnect knockout cable, AC adapter and power cord, power cable with C13 connector for UPSattachment, and a 1ft Cat5 cable. When ASMA is supplied standard, the optional ASM Interconnect Cable Kit is required in order to enable ASMinterconnect.5. RSA provides ASM Web interface using HTTP protocol; SNMP, DNS, PPP and DHCP network support; E-mail alerting; full remote graphical consoleredirection; blue-screen error information capture for Windows NT and 2000; and network flashing of host firmware for system BIOS and Advanced SystemManagement firmware.6. Remote Supervisor Adapter includes the following: adapter card, 20-pin ribbon cable, AC power adapter, power cable, power cable for UPS attachment,single pigtail cable, two RS-485 terminators and 1ft Cat5 cable. When RSA is shipped standard with a system, optional ASM Interconnect Cable Kit isrequired to enable ASM interconnect.7. Advanced System Management Interconnect Cable Kit includes an internal ASM interconnect knockout cable, an ASM interconnect single pigtail cableand an RS-485 terminator.8. This configuration is shown in interconnect scenario 3, appearing later in this section.9. This configuration is shown in interconnect scenario 1, appearing later in this section.10. The standard ISMP in x235, x255, x335 and x345 has enhanced functionality, described on the System Management Functional Comparison appearinglater in this section.11. This configuration is shown in interconnect scenario 4, appearing later in this section.12. When RSA is installed in an xSeries 235, 255 or 345, the onboard service processor is managed by RSA. All signaling and power are transmitted throughthe 20-pin ribbon cable, and an external Cat5 connection between the RSA and the integrated RS-485 port on the chassis is not installed. Connection of theexternal AC power supply is not required.13. xSeries 335 includes new interconnect cabling options available through the C2T Interconnect cable chaining connection. One integrated RS-485 port isavailable for connecting the integrated ISMP to an optional RSA when that system is used as a system management interconnect network focal point.Interconnect network connections are then established through the cable chaining connection for additional x335 systems. The external AC power supplyprovided with RSA is not required. See Rack Cabinets and Options or system sections for additional information regarding console connectivity.System Management Functional ComparisonOnboardPCI AdapterFeature/Function ASMP ISMP 1 ASMA 2 RSA 2, 3, 4 RSA IIMonitoring & AlertingAutomatic server shutdown/restart yes yes yes yes yesEnvironmental monitors (temperature,voltage)yes yes yes yes yesInterface with Light Path Diagnostics yes yes yes yes 5 yesPFA on system components (fans, powersupplies, memory, etc.)yes 6yes yes yes yesPost, loader, OS timeouts yes yes yes yes yesAlert MechanismsPager (numeric/alphanumeric) 7 yes no yes yes yesAlert on LAN 2 8 no 9yes no no yesDirector via LAN yes 10 10yes yes yes yes11Director via serial yes no yes yes yesE-mail no no no yes yesGenerate SNMP traps yes 10 10yes yes yes yesManagementRemote BIOS and SP firmware update 12 yes yes 13 yes 14yes yesRemote GUI-mode control no no no 5, 15yes yes324 Configuration and Options Guide


Refer to the Important Notices section for important noticesRemote text-mode control yes no no yes yesRemote POST and diagnostics 12 yes no yes 16, 17yes yesView status logs yes no yes yes yesView vital product data yes no yes yes yesCapture Windows blue screens no no no 15yes yesView SP configuration no no yes yes yesSet SP configuration no no no yes14 yesSave and restore SP configuration no no no yes15 yesRestart SP no no yes yes yesConnectivity & CablingIBM Director18 yes yes yes yes yesANSI terminal11 yes no yes yesTelnet yes19 no yes yesWeb interface 19yes no yes yes yes10/100 Ethernet yes 20 9yes yes yes yesDHCP no no no yes yesDNS no no no yes yes7PPP no no no yesDedicated serial port yes no 21dual yesShared serial port yes no 21dual no yesRedundant external power no no yes yes yes1. Refer to IBM’s website for firmware updates.2. When either RSA or ASMA are integrated as a standard adapter in an xSeries server, the two interconnect cables, external power supply and power cordsprovided with the optional packages are not included.3. When an optional RSA is installed in a system with standard ISMP, the optional adapter manages the onboard service processor and assumes all communicationsfunctionality.4. When an optional RSA is installed in a system with standard ASMP, the optional adapter serves only as an Ethernet and interconnect gateway. The onboardASMP provides all service processor data. An external Cat5 connection is required.5. Not available when RSA is added as an option to systems with standard ASMP.6. Performs monitoring capability only. Automated alerting available through IBM Director only.7. Requires customer-supplied external modem.8. Only available with IBM Director version 3.1 or newer.9. This functionality is only available on xSeries 235 and 255 servers, which include ISMP upgraded with a dedicated gigabit Ethernet processor.10. The specified alerting mechanisms may be configured, but sending such alerts to their destination requires connection through an RSA or ASMA either withinthe local machine or via the interconnect network.11. Requires customer-supplied external modem or null-modem cable.12. Requires an out-of-band connection such as a serial, Ethernet or ASM interconnect network (out-of-band connections bypass the NOS and are established evenwhen the NOS is not functioning).13. Only updates to the service processor firmware are possible. BIOS firmware updates are not available when using ISMP.14. Only available through the Web interface, connected via Ethernet or PPP.15. Only available through the Web or Telnet interface, via an Ethernet connection.16. Not available via interconnect network.17. Not available on systems without standard system management to which an optional RSA has been added.18. Connection to IBM Director allows use of all management and alerting functionality (except save and restore configuration file) via an active in-band, out-ofbandor interconnect network connection.19. Connection using Telnet, Web interface or Ethernet is available via an RSA or ASMA through the interconnect network.20. Requires interconnection of integrated service processor to optional ASMA or RSA using an Interconnect Cable Kit (P/N 03K9309).21. Requires the use of the included serial port splitter cable.Sample ASM Interconnect Network SchematicThis diagram shows one simplified example of an ASM interconnect network, intended to illustrate thefollowing key points:The interconnect bus is a logically and physically distinct entity from any LAN connection. Thus, ASMnodes are not required to be connected to the LAN that connects the focal point to the Director server. Theinterconnect bus may not be used as a bridge between two LANs. This improves security and scalability.Multiple hot-spare Director servers (or other management consoles) may exist for any interconnectnetwork. A Director server may also act as an interconnect node (compatible IBM hardware only), allowingremote diagnosis and repair of the Director server itself from a hot-spare server. This provides greatlyimproved availability and scalability.Appendix E. System Management Overview 325


Multiple hot-spare ASM focal points may exist for any interconnect network, allowing access to ASMfunctionality even in the event of a complete failure of the default focal point. This provides improvedavailability.ASM interconnect networks may consist of up to 24 ISMPs or RSAs.ASM interconnect networks may consist of up to 12 ASMPs or ASMAs, to which an additional 12 ISMPs orRSAs may be added.Each ASM node on this diagram may be any xSeries server containing suitable ASM hardware.Note: For more detailed information on specific system management capabilities and configurations, seethe cabling scenarios and service processor comparison tables in this326 Configuration and Options Guide


Refer to the Important Notices section for important noticesASM Interconnect BusEthernet LANIBM Director ServerRemote (hot-spare)IBM Director ServerModem orNull-ModemConnectionASM Focal PointASM Node(Hot-spare Focal Point)ASM NodexSeries Advanced System Management Interconnect Network ScenariosAppendix E. System Management Overview 327


1. Server with ASMP or ISMP and two integrated RS-485 ASMinterconnect ports on the rear of the chassisKey Features:• Allows standard system management functionality, including remote flash update of BIOSand adapter microcode, remote hardware diagnostics, and monitoring and alerting of criticalvoltage and temperature thresholds.• Remote BIOS update only available on ASMP.• Only includes ISMP with firmware v1.02 or later.xSeries 235, 255 and 345Servers:Instructions:1. Attach customer-supplied Cat5 cables (for connection to one or two other ASMinterconnect nodes) to the integrated RS-485 ports at the rear of the server. Unused RS-485ports must be terminated with the supplied RS-485 terminator.2. Server with standard RSAKey Features:xSeries 445 and 455 ship standard with RSA, which provides the latest generation of systemmanagement functionality. In addition to standard system management capabilities, RSAadds advanced features such as full remote operation of server NOS, advanced Ethernetfeatures and system management access even in the event of a complete server NOS failure.Requires purchase of ASM Interconnect Cable Kit.xSeries 445 and 455ServersInstructions:1. Insert pigtail cable into RS-485 ASM interconnect port on rear of adapter.2. Attach customer-supplied Cat5 cables (for connection to one or two other ASMinterconnect nodes) to the RS-485 ports of the pigtail adapter. UnusedRS-485 ports must be terminated with the supplied RS-485 terminator.ASM interconnect ports21328 Configuration and Options Guide


Refer to the Important Notices section for important notices3. Server with no standard service processor and optional RSAKey Features:xSeries 205, 225, 305, 445 and 455 ship standard without system management capability.To enable system management, an optional Remote Supervisor Adapter is required.xSeries 205, 225, 305, 445 and 455Servers:Instructions:1. Insert RSA into PCI slot on system planar (see system I/O section for slot restrictions).2. Connect 20-pin ribbon cable between system planar and RSA. xSeries 220 requires theexternal AC power supply.3. Insert pigtail cable into RS-485 interconnect port on adapter panel.4. Attach customer-supplied Cat5 cables (for connection to one or two other ASMinterconnect nodes) to the RS-485 ports of the pigtail adapter. UnusedRS-485 ports must be terminated with the supplied RS-485 terminator.4. Server with ISMP plus optional RSAKey Features:Adding an RSA to a server containing an ISMP merges their functionality. The RSA managesthe ISMP and handles communications.Only applicable to ISMP with firmware v1.02 or laterServersxSeries 235, 255, 335 (see note below) and 345Instructions:1. Insert RSA into PCI connector on System Planar (see system I/O section for slotrestrictions).2. Connect 20-pin ribbon cable between system planar and RSA.3. Insert pigtail cable into RS-485 port on adapter panel.4. Attach customer-supplied Cat5 cables (for connection to one or two other ASMinterconnect nodes) to the RS-485 ports of the pigtail adapter. UnusedRS-485 ports must be terminated with the supplied RS-485 terminator.Note: Refer to x335 I/O Options for more information on C2T Interconnect cable chainingtechnology connections supporting system management.4433112To system planar2To system planarAppendix E. System Management Overview 329


330 Configuration and Options Guide


Appendix F. xSeries I/O Option AttributesOptionNumberDescriptionAdapterLengthPCISupport 1LowprofileCapableHot-Plug 2PCIVoltageKeyMHz 1Storage Controllers06P5740 3ServeRAID-4Lx Ultra160 SCSI Controller Half 64-bit - X Universal 6625P3492 ServeRAID-5i Controller4 Full 64-bit X - Universal 6613N2190 ServeRAID-6i+ Controller 5 Half 64-bit - - 3.3 133 602R0988 ServeRAID-6M Controller (256MB Cache) 7 Full 64-bit - - 3.3 133 632P0033 ServeRAID-6M Controller (128MB Cache) 7 Full 64-bit - - 3.3 133 671P8642 ServeRAID-7k Controller 8 - - - - - -71P8648 9ServeRAID-7t SATA RAID Controller Half 64-bit X - Universal 6671P8592 10ATA133 RAID Controller Half 32-bit - - Universal 3319K4646 11PCI Wide Ultra160 SCSI Adapter Half 64-bit X - Universal 6671P8594 12Single Channel Ultra320 SCSI Controller Half 64-bit X - Universal 133Fibre Storage Controllers and Options 1300N6881 Netfinity FAStT Host Adapter Half 64-bit - X Universal 6624P0960 FC2-133 Host Bus Adapter 14 Half 64-bit X X Universal 133 6174290U FAStT900 Storage Server (US line cord) - - - - - -17421RU FAStT700 Fibre Channel Storage Server - - - - - -172260U FAStT600 Storage Server (US line cord, English pubs) - - - - - -35421RU FAStT200 Storage Server - - - - - -35422RU FAStT200 HA Storage Server - - - - - -3534F08 TotalStorage SAN Switch F08, 8-port (2Gb) - - - - - -2109F16 SAN Fibre Channel Switch, 16-Port (2Gb) - - - - - -NetworkingEthernet 1522P4501 Intel Pro/100S Desktop Adapter16 Half 32-bit - - Universal 3322P6501 Pro/1000 T Desktop Adapter by Intel17 Half 32-bit - - Universal 3306P3601 1710/100 Ethernet Server Adapter Half 32-bit - X Universal 3331P9601 PRO/1000 MT Server Adapter by Intel 17 Half 64-bit X X Universal 133 622P7801 NetXtreme 1000 SX Fiber Ethernet Adapter 14 Half 64-bit X X Universal 133 631P6301 NetXtreme 1000 T Ethernet Adapter (copper) 14, 17 Half 64-bit X X Universal 133 631P6401NetXtreme 1000 T Dual Port Ethernet AdapterHalf 64-bit X X Universal 133 6(copper) 14, 17Token Ring34L5001 16/4 Token-ring PCI Management Adapter17 Half 32-bit - X Universal 3334L5201High-Speed 100/16/4 Token-ring PCI Management Half 32-bit - X Universal 33Adapter 18331


07P270116/4 Token-ring Low Profile PCI ManagementHalf 32-bit X X Universal 33Adapter 17System Management 1903K9309Advanced System Management Interconnect Cable - - - - - -Kit 2009N7585 Remote Supervisor Adapter 21 Half 32-bit - - 22Universal 3359P2984 Remote Supervisor Adapter II 23 Half 32-bit - - 22Universal 3373P9341 Remote Supervisor Adapter II SlimLine 24 - - - - - -Communications33L4618 25V.90 PCI Data/Fax Modem Half 32-bit - - 5 331519100 26IXA Adapter Full 64-bit - - 3.3v 6622P5888 PCI Parallel Port Adapter (low profile) Half 32-bit - - 5 33Remote I/O Expansion8684-1RX RXE-100 Remote Expansion Enclosure 27 - - - - - -Related I/O Cables02R2068 Ultra320 Internal Single-drop 24in LVD SCSI Cable 2832P8164 External SCSI Interface Kit 29 - - - - - -24P7973 Ultra320 External SCSI Connector Cable Option 29 - -24P7929 Enabling Cable for External Ultra320 SCSI Port 30 - -10K3661 31, 32USB to Serial Adapter - - - - - -1. Adapters rated at a lower frequency than the slots in which they are installed will reduce the bus to the frequency of the slowest adapter. 133MHz PCI-Xadapters are backward compatible with 33/66MHz, 64-bit PCI-based servers.2. Hot-plug feature only supported in systems with Active PCI slots. For network operating system support, point your browser towww.pc.ibm.com/us/compat.3. ServeRAID-4Lx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor and provides a single channel, 32MB of ECC cache andeither one internal or one external Ultra160 connection. External connector is 0.8mm VHDCI.4. ServeRAID-5i Controller (P/N 25P3492) supports both Ultra320 and Ultra160 HDDs in a dedicated or mixed environment, allowing each HDD toperform at rated capacity. The adapter installs into limited PCI slots and converts both channels of the integrated SCSI controller to RAID in conjunctionwith the LSI 1020/30 chipset. Both standard and the optional SCSI HDD backplanes as well as internal tape drives and external SCSI devices cable directlyto the onboard controller connectors. Supports up to 528MB/s data transfers across the PCI bus with 128MB ECC SDRAM write-back cache with batterybackup. Supports RAID levels 0, 1, 10, 5, 50 and 1E. The option includes brackets for installation in both low-profile and standard PCI slots. Internal andexternal tape drives are supported by ServeRAID-5i only when a second channel on the integrated controller is available and the RAID configurationdesignates the second channel as a conventional SCSI bus. See system sections for supported tape drives.5. ServeRAID-6i+ Controller is a PCI-X adapter supporting both Ultra320 and Ultra160 HDDs in a dedicated or mixed environment, allowing each HDD toperform at rated capacity. The adapter installs into limited PCI slots and converts both channels of the integrated SCSI controller to RAID in conjunctionwith the LSI 1030 chipset. Both standard and the optional SCSI HDD backplanes as well as internal tape drives and external SCSI devices cabled directly tothe onboard controller connectors. Supports up to 1,064MB/s data transfers across the PCI bus with 128MB ECC SDRAMM write-back cache with batterybackup. Supports RAID levels 0, 1, 10, 5, 50 and 1E. The option includes brackets for installation in both low-profile and standard PCI slots. Internal andexternal tape drives are supported by ServeRAID-6i+ only when a second channel on the integrated controller is available and the RAID configurationdesignates the second channel as a conventional SCSI bus. See system sections for supported tape drives.6. This adapter is designed using PCI-X technology.7. ServeRAID-6M (P/Ns 02R0988, 32P0033) are PCI-X adapters powered by a 600MHz Intel xScale processor, providing 256MB or 128MB of ECC SDRAMbattery-backed cache. The dual-channel Ultra320 controller includes two internal 68-pin connectors and two external 0.8mm VHDCI connectors, supportingup to 14 HDDs on each channel at data transfer rates of up to 1,064MB/s. Supports RAID levels 0, 1, 10, 1EO, 5, 50 and 5EE with both Ultra160 and Ultra320HDDs.8. ServeRAID-7k is available for select systems, installs into a dedicated slot and does not consume a PCI slot. It works in conjunction with the integratedSCSI controller providing the following RAID levels: 0, 00, 1, 10, 1E, 1E0, 5 and 50.9. ServeRAID-7t is a low-profile capable, four-port SATA controller supporting RAID levels 0, 1, 5 and 10. All ports are internal. ServeRAID-7t is a universalPCI 2.2 compliant adapter powered by Intel’s 400MHz 80302 I/O processor and has 64MB of cache.10. ATA133 RAID controller (P/N 71P8592) supports RAID levels 0, 1 and 10 on up to four ATA66, 100 or 133 EIDE HDDs. The dual-channel IDE controllerincludes two internal 40-pin connectors, two 18in single-drop IDE cables (P/N 02R0719) and two 23in two-drop IDE cables (P/N 02R0721).11. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector, a five-drop multi-mode terminated LVD SCSIcable and one external 0.8mm VHCDI connector. Only one of the two connectors may be utilized. Hardware is included in the option to support either lowprofileor full-size installations.12. Single Channel Ultra320 SCSI Controller (P/N 71P8594) provides a single channel with one 68-pin internal connector, a four-drop multimode terminatedLVD SCSI cable and one external 0.8mm VHDCI connector. Only one of the two connectors may be utilized. Hardware is included in the option to supporteither low-profile (2U) or full-size (3U) installations.13. See Fibre Channel Solutions Overview section for additional configuration information.14. The option includes brackets for installation in both low-profile and full-size PCI slots.15. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer isrecommended. Installing fault-tolerant solutions provided by multiple manufacturers may cause failures if the intermediate drivers provided with theadapters are not compatible. See individual system I/O Options sections for additional information on adapter driver compatibility.16. For use of the Alert on LAN 2 features in the Desktop adapter, the system must be enabled with IBM-compatible Alert on LAN 2 hardware and softwarecomponents. Use of the Wake on LAN function requires a PCI 2.2 compatible system that supports Wake on LAN and provides auxiliary 3.3v powerthrough the PCI bus.17. Use of the Wake on LAN function requires a PCI 2.2 compatible system that supports Wake on LAN and provides auxiliary power through the PCI bus.18. Use of the Wake on LAN function requires a PCI 2.1 or 2.2-compatible system that supports Wake on LAN and provides auxiliary power through the 5vWake on LAN cable provided with the adapter via a 3-pin header in the system planar.332 Configuration and Options Guide


Refer to the Important Notices section for important notices19. Up to 24 Integrated System Management Processors or Remote Supervisors Adapters may be interconnected with an aggregate connection length of nomore than 91.4m (300ft). This interconnect network of 24 devices may also include a maximum of 12 Advanced System Management Processors oradvanced System Management PCI Adapters. A customer-supplied Cat5 cable is required for each interconnection.20. When a standard Remote Supervisor Adapter or ASM PCI Adapter is installed in a dedicated PCI slot with an external connector, support for connectionto other servers in an ASM interconnect network requires an optional Advanced System Management Interconnect Cable Kit(P/N 03K9309). Where applicable, direct connection to the RXE drawer management controller in an RXE-100 Remote Expansion Enclosure is supportedthrough a standard Interconnect Management Cable Kit with 3.5m cable (8m optional cable is available). Support is provided through a single LAN ormodem connection.21. Remote Supervisor Adapter (P/N 09N7585) includes an adapter card, 20-pin ribbon cable, AC power adapter, power cable, power cable for UPSattachment, single pigtail cable, two RS-485 terminators and 1ft Cat5 cable.22. Although the voltage key of this adapter is universal (compatible with 3.3 or 5v slots), the BIOS of each system limits installation to a specific PCI slot.23. Remote Supervisor Adapter II (P/N 59P2984) includes an internal 20-pin ribbon cable for connection to the system planar, an interconnect cable, a 56wAC power adapter, an intra-rack power cable and a country-specific wall power cord. External connectors include an RS230 (9-pin) serial port, 10/100 baseT Ethernet port (RJ-45), interconnect port (RJ-11) and power connector. The interconnect cable includes a single RJ-11 connector and dual RJ-48 ports.Supports an interconnect network of up to 24 RSAs or ISMPs with aggregate cable connection length of 300ft (91.4m) or less. No more than 12 ASMPs aresupported in an interconnect network. RJ-45 bus is self-terminating, i.e., terminators are not required for the interconnect bus.24. Remote Supervisor Adapter II SlimLine is similar to RSA II and is available for select systems. It installs into a dedicated slot on the systemboard anddoes not consume a PCI slot. An external AC adapter is not required as this card uses standby power from the system’s power.25. Due to homologation variances, modem availability differs by country.26. Some xSeries servers support the IXA Adapter (P/N 1519100) for connection to iSeries models. Refer to system sections for PCI slot restrictions.27. RXE-100 Remote Expansion Enclosure supports up to 12 additional PCI-X slots. Cable required for connection included with expansion unit, whichattaches to a standard integrated RIO port located on the back of the system chassis. An optional longer cable is available. Refer to RXE-100 section fordiagrams and supported options.28. Required to connect RAID controllers to the hot-swap backplane in x235 or x345.29. Required to enable external 0.8mm VHDCI connectors on some systems.30. Required to enable external 68-pin high-density SCSI connector on some IntelliStation systems.31. When supported, this option can be used for certain external device connections when only USB ports rather than serial or parallel ports are present ona system chassis.32. Available only in the US.Appendix F. xSeries I/O Option Attributes 333


334 Configuration and Options Guide


Technical UpdateIBM Eserver BladeCenter power module upgrade guidelinesThis Technical Update contains information that will help you determine whether you need to upgrade thepower modules in your IBM ® Eserver BladeCenter Type 8677 unit when installing IBM EserverBladeCenter blade servers or options.Note: These guidelines apply to an IBM Eserver BladeCenter Type 8677 unit. These guidelines do notapply to an IBM Eserver BladeCenter T Type 8720 or 8730 unit.Attention: Nonredundant power is not supported in BladeCenter products. Power modules mustalways be present in power bays 1 and 2. When any blade server or option is in blade bays 7 through 14,power modules must be present in all four power-module bays.If a power module fails or an ac power failure occurs, BladeCenter units configured for redundant poweroperation, as described in this document, will operate in a nonredundant mode, and the blower moduleswill run at full speed. You must replace the failing power module or restore ac power as soon as possibleto regain redundant power operation and to reset the blower modules to their normal operating speed.As of the date of this printing, four BladeCenter power-module options are supported:v IBM BladeCenter 1200W Power Supply Module (part number 48P7052)v IBM BladeCenter 1200W to 1400W Power Supply Upgrade Kit (part number 90P0197)v IBM BladeCenter 1800W Power Supply Module (part number 13N0570)v IBM BladeCenter 2000W Power Supply Module (part number 26K4816)Go to http://www.ibm.com/pc/compat/ for information about these options.Updates to this document are available from the IBM Web site. Complete the following steps to check forupdated documentation and technical updates:1. Go to http://www.ibm.com/pc/support/.2. In the Learn section, click Online publications.3. On the ″Online publications″ page, in the Brand field, select Servers.4. In the Family field, select your BladeCenter device.5. Click Continue.Keep this Technical Update with your BladeCenter and blade server documentation for future reference.


BladeCenter power overviewYour BladeCenter unit is separated into two power domains. Power domain A supports all theBladeCenter modules and bays 1 through 6; power domain A uses power modules 1 and 2.Power domain B supports bays 7 through 14 and uses power modules 3 and 4. To support devices inpower domain B, a power-supply option (consisting of two power modules) must be installed.BladeCenter unit front viewBladeCenter unit rear viewI/O module bay 3Power module 1I/O module 1ManagementPower module 3module 1Blower module 1ACACDCDCACACDCDCPower domain APower domain BBlower module 2Power module 4I/O module 2I/O module bay 4Managementmodule bay 2Power module 2Important:1. The power modules must be installed in pairs in a domain and must match each other in capacity(wattage, amperage, and so on).2. A power domain operating above the capacity of a single power module results in a nonredundantpower condition.3. In a pair of power modules, a power module that is not connected to 200-240 volt ac power sourceresults in a nonredundant power condition.4. To provide true redundant power, BladeCenter power modules 1 and 3 must be connected to adifferent 200-240 volt ac power source than power modules 2 and 4.5. An installed power module must be connected to an ac power source and must not be used as a filler.The following tables list the power requirement for each IBM Eserver BladeCenter blade server or optionthat is available as of the date of this printing. These power requirements assume that each blade serveris fully configured and are based on typical workloads. Use the values in these tables and complete theupgrade calculation (see “Upgrade calculation” on page 4) to determine which power modules areneeded to deliver full power redundancy for your configuration.


Table 1. HS20 blade server power valuesEserver BladeCenter HS20 blade serverIBM power units for the correspondingnumber of installed microprocessors1 microprocessor 2 microprocessors2.0 GHz/400 MHz (8678-21X) 0.9 1.12.4 GHz/400 MHz (8678-41X) 0.9 1.22.6 GHz/400 MHz (8678-51X) 1.0 1.22.8 GHz/400 MHz (8678-61X) 1.0 1.32.4 GHz/533 MHz (8832-9TX) 0.9 1.22.8 GHz/533 MHz (8832-21X, 8832-L1X, 8832-LTX) 1.0 1.53.06 GHz/533 MHz (8832-31X, 8832-M1X) 1.2 1.63.06 GHz/533 MHz (8832-N1X) 1.93.2 GHz/533 MHz (8832-G1X, 8832-J1X, 8832-GTX) 1.2 1.65Table 2. JS20 blade server power valuesEserver BladeCenter JS20 blade serverIBM power units for twoinstalled microprocessors1.6 GHz/800 MHz (8842-21X) 1.5Table 3. BladeCenter expansion unit power valuesEserver BladeCenter Expansion unitIBM power unitsSCSI Storage Expansion Unit Option 0.4Table 4. HS40 blade server power valuesEserver BladeCenter HS40 bladeserver (occupies 2 bays)IBM power units and the corresponding number of installedmicroprocessors (power unit value for each bay)1microprocessor2microprocessors3microprocessors4microprocessors2.0 GHz/400 MHz (8839-21X) 0.70 0.90 1.10 1.302.2 GHz/400 MHz (8839-51X) 0.70 0.95 1.15 1.402.7 GHz/400 MHz (8839-61X, 8839-6TX) 0.75 1.0 1.25 1.552.8 GHz/400 MHz (8839-41X) 0.75 1.0 1.30 1.553.0 GHz/400 MHz (8839-71X) 0.80 1.1 1.35 1.67Important:The HS40 blade server occupies two adjacent bays. When you complete the “Power worksheets” on page6, enter the power unit value from Table 4 twice, once for each bay that the blade server occupies. If youinstall an HS40 blade server in bays 6 and 7, the blade server will use power from both power domain Aand power domain B. In the power worksheets, enter the power unit value twice, once for bay 6 ofpower domain A and once for bay 7 of power domain B.


Upgrade calculationComplete the following steps to determine the power-module capacity that is needed to maintain fullredundancy in each power domain.If you have two 2000 W power modules installed in power domain A and two 2000 W power modulesinstalled in power domain B, you do not need to complete this upgrade calculation. Your system meetsthe requirements to maintain full power redundancy in both domains.Attention: If you are replacing the existing power modules with 2000 W power modules, you mustupgrade the management-module firmware. If two management modules are installed in the BladeCenterunit, both management modules must be upgraded to the same level of firmware. Go to the IBM SupportWeb site at http://www.ibm.com/pc/support/ and obtain the latest firmware.1. In the power worksheets on page 6, list the blade servers or other devices that are installed in thebays.2. In the tables on page 3, look up the number of IBM power units associated with each device andenter it in the applicable power worksheet (see “Example calculation” on page 7).3. Add all of the IBM power unit values for each domain and enter the totals.4. To maintain full power redundancy in power domain A, make sure that the power modules in bays 1and 2 are connected to different 200-240 volt ac power sources and meet the requirements in thefollowing table:Table 5. Power Domain A minimum power requirementsSum of IBM power units for blade servers in Power domain ALess than 7.4Minimum power module required1200 W (labeled 7.5A)Greater than or equal to 7.4 and less than 9.0 1400 W (labeled 9A)Greater than or equal to 9.0 and less than 10.0 1800 W (labeled 12A)Greater than or equal to 10.02000 W (labeled 13.5A)Important: If the sum of the power unit values in power domain A is greater than the capacity of theinstalled power modules, power domain A has nonredundant power. Complete the following steps:a. Determine whether rearranging the installed devices between power domain A and power domainB in the BladeCenter unit will sufficiently reduce the power requirements for the power domain(use the power worksheets on page 6).b. If rearranging the installed devices does not sufficiently reduce the power requirements, the powermodules must be upgraded to maintain redundancy. Install the 1200W to 1400W Power SupplyUpgrade Kit (part number 90P0197) on the power modules to attain 1400 W, install the 1800WPower Supply Module option (part number 13N0570) to attain 1800 W, or install the 2000W PowerSupply Module option (part number 26K4816) to attain 2000 W. Go tohttp://www.ibm.com/pc/compat/ for information about ordering these options.


5. To maintain full power redundancy in power domain B, make sure that the power modules in bays 1and 2 are connected to different 200-240 volt ac power sources and meet the requirements in thefollowing table:Table 6. Power Domain B minimum power requirementsSum of IBM power units for blade servers in Power domain BLess than 9.9Minimum power module required1200 W (labeled 7.5A)Greater than or equal to 9.9 and less than 11.5 1400 W (labeled 9A)Greater than or equal to 11.5 and less than 13.4 1800 W (labeled 12A)Greater than or equal to 13.42000 W (labeled 13.5A)Important: If the sum of the power unit values in power domain B is greater than the capacity of theinstalled power modules, power domain B has nonredundant power. Complete the following steps:a. Determine whether rearranging the installed devices between power domain A and power domainB in the BladeCenter unit will sufficiently reduce the power requirements for the power domain(use the power worksheets on page 6).b. If rearranging the installed devices does not sufficiently reduce the power requirements, the powermodules must be upgraded to maintain redundancy. Install the 1200W to 1400W Power SupplyUpgrade Kit (part number 90P0197) on the power modules to attain 1400 W, install the 1800WPower Supply Module option (part number 13N0570) to attain 1800 W, or install the 2000W PowerSupply Module option (part number 26K4816) to attain 2000 W. Go tohttp://www.ibm.com/pc/compat/ for information about ordering these options.Statement 13:DANGEROverloading a branch circuit is potentially a fire hazard and a shock hazard under certainconditions. To avoid these hazards, ensure that your system electrical requirements do not exceedbranch circuit protection requirements. Refer to the information that is provided with your devicefor electrical specifications.Power distribution unit assessmentIf your calculations indicate that you need to upgrade your power modules, you will also need toreassess your power distribution unit (PDU) configuration. Use the IBM BladeCenter Planning andInstallation Guide to determine the number and types of PDUs that you need. Complete the followingsteps to obtain the BladeCenter Planning and Installation Guide:1. Go to http://www.ibm.com/pc/support/.2. Click the BladeCenter link under Servers, and then select the brand Servers and the familyBladeCenter.3. Click Continue.4. From the View by document type menu, click Online publications.


Power worksheetsPower domain A worksheet (for power modules 1 and 2)Blade bay Description of installed device IBM power units123456TotalPower domain B worksheet (for power modules 3 and 4)Blade bay Description of installed device IBM power units7891011121314Total


Example calculationPower domain A worksheet (for power modules 1 and 2)Blade bay Description of installed device IBM power units1 3.06 GHz/533 MHz HS20 blade server with 2 microprocessors 8832-31X 1.62 SCSI Storage Expansion Unit 0.43 3.06 GHz/533 MHz HS20 blade server with 2 microprocessors 8832-31X 1.64 SCSI Storage Expansion Unit 0.45 3.06 GHz/533 MHz HS20 blade server with 2 microprocessors 8832-31X 1.66 3.06 GHz/533 MHz HS20 blade server with 2 microprocessors 8832-31X 1.6Total 7.2Result:vv7.2 IBM power units < 7.4 IBM power unitsTwo 1200 W power modules will provide full power redundancy for power domain APower domain B worksheet (for power modules 3 and 4)Blade bay Description of installed device IBM power units7 3.06 GHz/533 MHz HS20 blade server with 2 microprocessors 8832-N1X 1.98 3.06 GHz/533 MHz HS20 blade server with 2 microprocessors 8832-N1X 1.99 3.06 GHz/533 MHz HS20 blade server with 2 microprocessors 8832-N1X 1.910 3.06 GHz/533 MHz HS20 blade server with 2 microprocessors 8832-N1X 1.911 3.2 GHz/533 MHz HS20 blade server with 2 microprocessors 8832-G1X 1.6512 2.8 GHz/400 MHz HS40 blade server with 4 microprocessors - first bay(HS40 occupies 2 bays) 8832-41X13 2.8 GHz/400 MHz HS40 blade server with 4 microprocessors - secondbay (HS40 occupies 2 bays) 8839-41X14 3.2 GHz/533 MHz HS20 blade server with 2 microprocessors 8832-G1X 1.651.551.55Total 14.0Result:vv14.0 IBM power units > 13.4 IBM power unitsTwo 2000 W power modules will provide full power redundancy for power domain BAttention: To maintain proper system cooling, each unoccupied blade bay must contain a filler blade.To maintain proper module cooling, each unoccupied I/O, management-module or power-module baymust contain a filler. An installed power module must be powered and must not be used as a filler.


Eleventh Edition (June 2004)IBM, BladeCenter, Eserver, e-business logo, and xSeries are trademarks of the IBM Corporation in the United States,other countries, or both.© Copyright International Business Machines Corporation 2004. All rights reserved.US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contractwith IBM Corp.(1P) P/N: 25K8425


Appendix H. xSeries DC Power and NEBS-compliant ModelsThe following models, designed for the telecommunications industry and may utilize DC Power and/orare NEBS compliant.Refer to individual system sections for complete configuration details.ModelxSeries 305 DC Power model 8673-4AXxSeries 335 DC Power model 8676-LAXxSeries 343 DC Power model 8827-14XxSeries 343 DC Power model 8847-14XxSeries 343 DC Power model 8847-24XBladeCenter T DC Power model 8720-1RXBladeCenter T AC Power model 8730-1RXBladeCenter HS20 8832-9TXBladeCenter HS20 8832-LTXBladeCenter HS20 8832-GTXBladeCenter HS20 8839-6TXDescription2.4GHz/533MHz-512KB L2 P4, 256MB memory. Includes a -48v to -60v, 200w DC powersupply.2.8GHz/533MHz-512KB L2 P4, 512MB memory. Includes a -48v to -60v, 332w DC powersupply.1.26GHz/133MHz-512KB L2 PIII, 2GB memory. Includes two -48v to -60v, 350w DC powersupplies.2.4GHz/533MHz-512KB L2 P4, 1GB memory. Includes a -48v to -60v, 470w DC power supply.2.4GHz/533MHz-512KB L2 P4, 2GB memory. Includes two -48v to -60v, 470w DC powersupplies.BladeCenter T chassis including two -48 to -60v, 1300w DC power supplies.BladeCenter T chassis including two -200 to -240v, 1300w DC power supplies.2.4GHz/533MHz-512KB L2 Xeon, 1GB memory.2.8GHz/533MHz-512KB L2 Xeon, 1GB memory.3.2GHz/533MHz-1MB L3 Xeon, 1GB memory.2.7GHz/400MHz-2MB L3 Xeon MP, 2GB memory.343


344 Configuration and Options Guide


Important NoticesIBM reserves the right to change product specifications and to discontinue marketing products withoutnotice.MHz and GHz only measure microprocessor internal clock speed, not application performance. Manyfactors affect application performance.MB, GB and TB = 1,000,000, 1,000,000,000 and 1,000,000,000,000 bytes, respectively, when referring tostorage capacity. Accessible capacity is less; up to 3GB is used in service partition. Actual storage capacitywill vary based upon many factors and may be less than stated. Some numbers given for storage capacitiesgive capacity in native mode followed by capacity using data compression technology.Tape Drives which utilize data compression technology have storage capacity that will vary dependingupon whether the drive is operating in native mode (without compression) or compressed mode. Actualstorage capacity will vary based upon many factors and may be less than the maximum possible.Maximum internal hard disk and memory capacities may required the replacement of any standard harddrives and/or memory and the population of all hard disk bays and memory slots with the largestcurrently supported drives available. When referring to variable speed CD-ROMs, CD-Rs, CD-RWs andDVDs, actual playback speed will vary and is often less than the maximum possible.The information contained in this document has not been submitted to any formal IBM test and isdistributed AS IS. The use of this information or the implementation of any of these techniques is acustomer responsibility and depends on the customer’s ability to evaluate and integrate them into thecustomer’s operational environment. While each item may have been reviewed by IBM for accuracy in aspecific situation, there is no guarantee that the same or similar results will be obtained elsewhere.Customers attempting to adapt these techniques to their own environments do so at their own risk.Visit www.ibm.com/pc/safecomputing periodically for the latest information on safe and effectivecomputing.For more information on IBM’s statement of Limited Warranty, please call 1-800-772-2227 in the UnitedStates, 1-800-426-2255 in Canada, or contact your IBM representative or reseller. Copies are available uponrequest. For warranties including onsite service, a technician is sent after IBM attempts to resolve theproblem remotely.Energy Star compliance: The EPA, as a matter of policy, does not endorse any particular company or itsproducts.IBM makes no representations or warranties with respect to non-IBM products. Support (if any) for thenon-IBM products is provided by the third party, not IBM. IBM makes no warranties, express or implied,regarding non-IBM products and services that are ServerProven, including but not limited to the impliedwarranties of merchantability and fitness for particular purpose. These products are offered and warrantedsolely by third parties.Unless otherwise noted, phone numbers and fax numbers are valid only in the United States. Outside theUnited States, please call your local IBM representative for assistance.Applications included in IBM products may vary from retail versions and may not include alldocumentation or functions. Not all products are sold separately. Third-party software licenses may apply.This publication was produced in the United States. IBM may not offer the products, services or featuresdiscussed in this document in other countries, and the information is subject to change without notice.Consult your local IBM representative for more information on the products, services and featuresavailable in your area.©IBM Server Group3039 Cornwallis Rd.Research Triangle Park, NC 27709All the part numbers referenced in this publication are product part numbers and not service part numbers.This publication could contain technical inaccuracies or typographical errors. Changes are periodicallymade to the information herein; these changes will be incorporated in new editions of this publication. IBMmay make improvements and/or changes in the product(s) and/or program(s) described in thispublication at any time. IBM reserves the right to alter specifications and other product informationwithout notice. It is your responsibility to obtain the latest information.Other part numbers in addition to those listed in this document may be required to support a specificdevice or function.Data on competitive products is obtained from publicly obtained information and is subject to changewithout notice. Please contact the manufacturer for the most recent information.345


This IBM equipment is subject to applicable rules and regulations of the United States FederalCommunication Commission (FCC).The following items are trademarks or registered trademarks of IBM Corporation in the United States orother countries or both: IBM, the IBM logo, Active PCI, Alert on LAN, BladeCenter, Chipkill memory, the e-business logo, ESCON, ~, IntelliStation, LANStreamer, Light Path Diagnostics, NetBAY3, NetBAY3E,NetBAY22, Netfinity, OS/2, Predictive Failure Analysis, ServeRAID, ServerGuide, ServerProven, SurePath,TechConnect, TME 10 Netfinity, Wake on LAN, xSeries, X-Architecture, 800-CALL-IBM. For a list ofadditional IBM trademarks, please see http://www.ibm.com/legal/copytrade.shtml.Lotus, Lotus Notes and Lotus SmartSuite are trademarks of Lotus Development Corporation, and/or IBMCorporation.Linux is a trademark of Linus Torvalds in the United States, other countries, or both.Intel, Pentium, Celeron, Itanium, MMX, and Pentium III Xeon are trademarks or registered trademarks ofIntel Corporation. Microsoft, Windows and Windows NT are trademarks or registered trademarks of theMicrosoft Corporation. UNIX is a registered trademark in the United States and other countries orregistered trademarks licensed exclusively through X/Open Company Limited. Trinitron is a trademark ofthe Sony Corporation. Java and all Java-based trademarks and logos are trademarks or registeredtrademarks of Sun Microsystems, Inc. in the U.S. and/or other countries. All other registered trademarksand trademarks are properties of their respective owners.IBM offers configure-to-order (CTO) capability for selected products through Easy Access. Althoughsimilar to machine type models (MTM), CTO systems utilize different part numbers called Sales BuildingBlocks (SBB). The contents of an option may not entirely correspond to an SBB because only a certaincomponent within an option package may be required to configure a specific system. Additional ordifferent configuration rules or limitations may apply to the SBB. When a difference occurs, the rules will bedocumented in the tables, diagrams or footnotes.INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS”WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOTLIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. SOME STATES DO NOT ALLOW DISCLAIMER OF EXPRESS OR IMPLIEDWARRANTIES IN CERTAIN TRANSACTIONS. THEREFORE, THIS STATEMENT MAY NOT APPLY TOYOU. THERE IS NO GUARANTEE THAT IBM WILL MARKET ANY PARTICULAR PRODUCT IN YOURCOUNTRYThe information contained in this document has not been submitted to any formal IBM test. The followingparagraph does not apply to the United Kingdom or any country where any such provisions areinconsistent with local law:The use of this information or the implementation of any of these techniques is a customer responsibilityand depends on the customer’s ability to evaluate and integrate them into the customer’s operationalenvironment. While each item may have been reviewed by IBM for accuracy in a specific situation, there isno guarantee that the same or similar results will be obtained elsewhere. Customers attempting to adaptthese techniques to their own environments do so at their own risk.346 Configuration and Options Guide


© Copyright IBM Corporation 2003IBM Server Group3039 Cornwallis RoadResearch Triangle Park, NC 27709

More magazines by this user
Similar magazines