Owner's Manual - Mustang Survival

CONVERSION CAP REMOVALOnce the conversion cap is removed, the MD3196 becomes an automaticinflation device. Firmly pull the conversion cap lanyard to remove theconversion cap (Fig.25).NOTE:Do not pull inflation lanyard when removing conversion capFIGURE 25To remove the conversion cap when packed, pull the conversion caplanyard out from the opening of the cover of the LP’s right lobe. Visuallyconfirm the conversion cap has been removed from the valve opening.Place the conversion cap in the anti-chafing cover, in the front pocket,when not in use.RepackingIMPORTANT: Carefully read the entire Repacking instructions toachieve a properly packed Inflatable Vest with LIFT TMIf your Inflatable Vest with LIFT TM has been used and/or the hydrostaticinflator replaced, always inflate through the oral tube and check that itstays inflated at least overnight. With the dust cap in the top of the oraltube, gently squeeze the Inflatable Vest with LIFT TM until all air or gashas been expelled (Fig. 11). Do not wring or twist the Inflatable Vest withLIFT TM . Put the oral tube dust cap back in its stowed position on the oraltube (Fig. 26). Let the life jacket dry before packing.17 MUSTANG SURVIVAL