Product Catalogue - Hot Press

20PRESSURE SENSITIVEMOUNTING FILMSPRESSURE SENSITIVE MOUNTING FILMSSELF WOUND MOUNT FILMA “self-wound” 12 micron polyester carrier film, coated on both sides with astrong acrylic adhesive and protected by a single release liner. The liner issiliconised on both sides. As the roll is unwound, the adhesive is exposed.Self-wound films are intended for use with laminators that feature anunwind shaft.DOUBLE SIDED MOUNT FILMA pressure-sensitive adhesive coated on either side of a clear 50 micronPVC film. Each side is protected by a paper liner. This film is used inconjunction with the JetMounter or other laminators to pre-coat mountingboards in order to produce a self-adhesive mounting board. It is also suitablefor basic hand application and cuts easily into manageable sheets.TRANSPARENCY MOUNT FILMThis mount film features ultra-clear adhesives, coated to each side of anoptically clear polyester film. In order to maintain their smoothness, theadhesive layers are protected by high quality filmic release liners on bothsides. A primary application for this film is face-mounting images onto therear of acrylic panels.WINDOWTACA revolutionary mounting film with a host of uses. This film has a permanentsmooth adhesive on one side and a textured peelable adhesive on theother. Its primary use is as an adhesive for applying artwork and signageto glass and other transparent surfaces. The permanent side is appliedto the face of the artwork and then the textured side is hand applied tothe glass. The texture within the adhesive allows for any trapped air to beeasily pushed away and the peelable nature allows for accurate positioning.When required, the artwork can be removed cleanly from the glass withno residue being left behind. This film is also suitable for application tothe back of artwork or photographs that need accurate positioning withinalbums and a stronger bond can be achieved with the use of a hairdryerand hand roller to cure the adhesive.