Owner's Manual - La Toile des batteurs

IMPORTANT NOTESAdditional Precautions551• Please be aware that the contents of memory can beirretrievably lost as a result of a malfunction, or theimproper operation of the unit. To protect yourself againstthe risk of loosing important data, we recommend that youperiodically save a backup copy of important data youhave stored in the unit’s memory in another MIDI device(e.g., a sequencer).552• Unfortunately, it may be impossible to restore the contentsof data that was stored in the unit’s memory or in anotherMIDI device (e.g., a sequencer) once it has been lost.Roland Corporation assumes no liability concerning suchloss of data.553• Use a reasonable amount of care when using the unit’sbuttons, sliders, or other controls; and when using its jacksand connectors. Rough handling can lead to malfunctions.554• Never strike or apply strong pressure to the display.556• When connecting / disconnecting all cables, grasp theconnector itself—never pull on the cable. This way you willavoid causing shorts, or damage to the cable’s internalelements.557• A small amount of heat will radiate from the unit duringnormal operation.558a• To avoid disturbing your neighbors, try to keep the unit’svolume at reasonable levels. You may prefer to useheadphones, so you do not need to be concerned aboutthose around you (especially when it is late at night).558c• Since sound vibrations can be transmitted through floorsand walls to a greater degree than expected, take care notto allow such sound to become a nuisance to neighbors,especially at night and when using headphones. Althoughthe drum pads and pedals are designed so there is aminimal amount of extraneous sound produced whenthey’re struck, rubber heads tend to produce loudersounds compared to mesh heads. You can effectivelyreduce much of the unwanted sound from the pads byswitching to mesh heads.559a• When you need to transport the unit, package it in the box(including padding) that it came in, if possible. Otherwise,you will need to use equivalent packaging materials.562• Use a cable from Roland to make the connection. If usingsome other make of connection cable, please note thefollowing precautions.• Some connection cables contain resistors. Do not usecables that incorporate resistors for connecting to thisunit. The use of such cables can cause the sound level tobe extremely low, or impossible to hear. For informationon cable specifications, contact the manufacturerof the cable.6