Views
3 years ago

Installation Instructions - Power Vent Adapter Kit

Installation Instructions - Power Vent Adapter Kit

Installation Instructions - Power Vent Adapter

HEARTH PRODUCTSKITS AND ACCESSORIESP/N 506019-26REV. N/C 10/2008ELDV Power VentAdapter kitINSTALLATION INSTRUCTIONS FOR The ELDV-PVAK (H7407)FireplaceModelFireplace adapter kits (For LPVK-110)Kit CatalogNumberKit ContentsRear Log SupportELDVTable 1H7407(ELDV-PVAK)5/8” Restrictor1” RestrictorRear Log BracketRemove the 2 screwsindicated by arrowsKIT CONTENTSLog Support Bracket - 1 each, Restrictor 5/8” - 1 each, Restrictor1” - 1 eachTOOLS NEEDED - 5/16” Nut DriverGENERAL INFORMATIONThis kit provides components that are designed to adapt any sizeELDV fireplace to be used with the Lennox LPVK-110 Power Vent Kit.ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION ANDOPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TOTHESE INSTRUCTIONS.Installation InstructionsFigure 1 - Log Support BracketVent Run ParametersAny Vent Run With A Vertical HeightGreater Than 30 FeetAny Vent Run With A Vertical HeightLess Than 30 FeetUse 5/8” RestrictorProvided With This KitUse 1” RestrictorProvided With This KitNote: See Power Vent Kit manual for maximum and minimumvent run parameters.Table 2restrictor BodyStep 1. Remove the glass door per instructions in the ELDV Careand Operation Instructions Manual.Step 2. Using a 5/16” nut driver, remove and discard the rear log supportbracket per instructions in Figure 1 and using the same screws,install the rear log support bracket provided with this kit. Orient asshown in Figure 1.Step 3. Refer to Figure 2 and remove two screws securing the downdraftbaffle. Remove and retain the down-draft baffle.Step 4. Remove two screws securing the restrictor base plate andremove the restrictor assembly from the fireplace vent outlet.Step 5. Remove two screws securing the restrictor body to the baseplate. Discard the restrictor body.Down Draft BaffleFigure 2 - Removing Baffle And Base Platerestrictor Base PlateNOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.

Hearth Venting Manual - Enervex
Installation instructions and user guide - Fisher & Paykel
SPEEDBEAD Installation Instructions - OpticsPlanet.com
Installation instructions - Akrapovic Auspuff
trex 700 nitro electronic conversion kit installation instructions
trex 700 nitro electronic conversion kit installation instructions
INSTRUCTIONS FOR INSTALLATION, USE AND ... - Robeys Ltd
Installation Instructions – RVR Solar Water Heating Kits - RVR.ie
Aprilaire 1213 & 1413 Upgrade Kit Installation Instructions
Instruction Manual - Minka Group
BMA 0010 Instruction and Installation Manual Oil-Air Cooler ACN
Burris SpeedBead Benelli 2 Installation Instructions - OpticsPlanet.com
pva40 power vent adaptor kit installation instructions - Continental ...
stainless steel vent termination kit installation instructions
installation instructions ed300 icemaker adapter kit (p/n 629087952)
concentric vent termination kit installation instructions
Power Vent Kit - Apollo Heating & Air Conditioning
installation and operating instructions for aq-1 and aq-2 power vent ...
uw50 powered vent fan kit - part no. 918303 installation ... - Hobart
power vented gas water heater installation and operating instruction ...
installation instructions ed300 icemaker adapter kit (p/n 629087957)
Throttle Body Injection Adapter Kit Installation Instructions for - Jegs
installation instructions for flexible vent kit part ... - Bradford White
installation instructions for solid vent kit part number - Bradford White
INSTALLATION INSTRUCTIONS USB To 3.5mm Adapter Kit
Replacement Coil Tubing Adapter Kit Installation Instructions
Powercool power attic ventilators installation instructions - Air Vent