FTTH-Solutions - BKtel

Customer Premises EquipmentTriple Play SolutionsThe XON1500 is the newest memberof BKtel’s XON CPE family. The speedof 1 Gbit/s along with the well provenconcept of a managed Ethernet switchand a solid metal housing makes it tothe ideal FTTH network termination.Flexibility is one of the most obviousadvantages of the point-to-pointnetwork architecture. The XON1500supports this flexibility with itsmulti-rate optical WAN interface.The CPE can be used with FastEthernet and upgraded any time toGigabit Ethernet without any hardwareexchange at the subscribers premises.Gigabit Ethernet Managed SwitchXON1500Multi-rate WAN interface,1000Base-BX10, 100Base-BX104 x 1000Base-T LAN interfacesIntegrated 10/100/1000 MbpsEthernet switchIPv6 supportVirtual LAN (VLAN)Quality of Service / Class of ServiceIGMP Snooping/MLDBandwidth ControlSNMP agentRemote diagnosticsWeb-inferfaceTwo FXS ports to connect two analogphonesUltra low noise Cable TV / SAT TVReceiverISDN adapter (optional upon request)LAN SFP cage (optional upon request)Available UnitsXON1500.SVC:Gigabit Ethernet, VoIP, Cable TVXON1500.SVSAT:Gigabit Ethernet, VoIP,Cable & Satellite TVPassive Fiber ManagementThe XON family is based on a wallmountable passive fiber termination unit.Secure termination of drop cables andinhouse cables is possible.Fiber Protection UnitInstallation platform for allXON500 / XON1500 seriesWall mountable module withintegrated fiber managementSeal protectionXON10.WPXON10.WAll versions available in one-fiber(with additional WDM coupler) orstandard two-fiber solution.6FTTHFTTH 7

Customer Premises EquipmentRF Video OverlayUltra Compact and Easy to InstallOptical TransmissionOptical Ethernet AccessLayer 2 Media ConverterMulti-rate WAN interface (SFP)1000 Base-BX10, 100 Base-BX101 x 1000 Base-T LAN interfaceIPv4/v6 supportAuto-crossover MDI/MDIX featurefor plug-and-playPower consumption 100 kmSBS threshold adjustmentES10XL (CATV):up to +19 dBm for 65 km fiberES26XL (CATV + SAT):up to +15 dBm for 40 km fiberAutomatic Gain Control (AGC)Up to 2 x 13 dBm optical output powerA key component of an RF VideoOverlay system is the opticaltransmitter converting the electricalTV signal into an optical modulatedsignal. The optical wavelength isgenerally chosen in the range of1550 nm because optical amplifierswith high performance are availablefor this wavelength.BKtel offers a range of optical transmitters:The high end external modulatedtype is required for extended networkswith large distance to be covered.Direct modulated transmitters areonly useful for short distance and theirusage is therefore restricted to smallnetworks with local available CATV orSAT TV feeds.Fx-ES10XL / Fx-ES26XLDirect Modulated TransmitterFx-DS26CATV & SAT TV FTTH Network TerminationPassive FTTH Network TerminationBox with integrated OCR1016E /OCR2206E optical CATV/SAT TVReceiver Module for drop andinhouse optical fiber cabling.XON50.C / XON50.SAT221550 nm high performance OpticalBC (broadcast) Transmitter for CATVand SAT-IFBandwidth: 2.6 GHzUp to 10 km distanceAutomatic Gain Control (AGC)9 dBm optical output port8FTTHFTTH 9

RF Video OverlayOptical AmplificationPassive Optical Power splitting on an RF only SystemThe optical amplifier, the second keycomponent, is required in order torecover the optical signal level aftertransmission over long fiber distances(inline amplifier, EDFA) or in order toboost its level for the final distribution(YEDFA) to a large number of endusers.The third key component isrepresented by passive optical splittersand optical wavelength divisionmultiplexers (WDM). The componentsare required for splitting optical powerin order to supply adequate opticalsignal level to the end user or tocombine or separate the differentoptical wavelengths on a fiber opticlink.Optical Amplifier (EDFA)Fx-OVnxxxOptical SplitterFOVnnn-PLCOptical amplification of CATV andSAT-IF signals in FTTH networks,1540 nm - 1560 nmAdjustable output powerConstant Output Power Mode andConstant Gain ModeSBS detection optionalRF Video Overlay in FTTH networksUp to 64 output ports available in1 or 2 RUOptical connector: SC/APC or LC/APCInsertion loss < 19.7 dBUniformity < 1.6 dBWavelength range: 1260 -1650 nmVery High Power Optical Amplifier (YEDFA)Fx-OV16xxxRF Video Overlay in FTTH networks,used as Booster Amplifier on the lastmileAmplification of CATV and SAT-IFsignals in FTTH networks,1545 nm - 1565 nmPre- and Booster Amplifier in one19” deviceUsable in combination with externalmodulated Optical Transmitter(Fx-ES10, Fx-ES26)Adjustable output powerConstant Output Power Mode andConstant Gain ModeFx-OV32165Optical Splitter + Integrated WDM ArrayIP and RF Video Overlay inFTTH networks over one fiber:1310 & 1490 & 1610 nm IP /1550 nm RF Video1 Input port RF Video1 RUFOVnnn-PLC-IPIPAvailable VersionsWDMIP+ RF Video1016 x 14.5 dBm (SC/APC or LC/APC)in 1 RU*16 x 16.5 dBm (SC/APC or LC/APC)in 1 RU*32 x 16.5 dBm (LC/APC) in 1 RU*16 x 20 dBm (LC/APC) in 1 RU*8 x 20 dBm (LC/APC) in 1 RU** RU = Rack UnitFTTHAvailable Versions:FOV016-PLC-IP16 In/Out ports IP (MPO APC)16 combined RF Video and IP In/Outports (SC/APC)Insertion loss < 15 dBUniformity < 1.9 dBRF VideoFOV032-PLC-IP32 In/Out ports IP (MPO APC)32 combined RF Video and IP In/Outports (SC/APC)Insertion loss < 18 dBUniformity < 1.9 dBOpticalSplitterWDMWDMIP+ RF VideoIP+ RF VideoFOV064-PLC-IP64 In/Out ports IP (MPO APC)64 combined RF Video and IP In/Outports (LC APC)Insertion loss < 20.7 dBUniformity < 2 dBFTTH 11

Provisioning of Network Termination UnitsTo complete a FTTH network BKteloffers the Device Auto ConfigurationSystem (DACS). DACS is a softwaresolution that automates the remoteconfiguration process of all CPEs inFTTH networks without any customerhardware assignment. Based onDHCP Option 82 DACS allocates thesubscribed services and provideseach connected CPE device withthe corresponding configurationparameters. The software system isespecially designed for the operationwith BKtel’s XON product family.Kurzer Text über FTTH, eventuell auch über BKtel.FeaturesIP-NetworkAccess port based configuration viaDHCP Option 82Remote configuration of allparametersAutomatic firmware management foreach device typeTFTP/DHCP management includedFully automated device configurationBKtel Provisioning:IP address assignment (DHCP)Switch configuration (e.g. VLANs)VoIP configurationFirmware upgradeDefault configuration upgradeRemote Diagnostics of CPE:Optical Transceiver parametersPhysical Port StatusVoice StatusDirect Link DetectionOptical Input Power of theCATV receiverOur CompanyBKtel was founded 1997 as a result ofa management buy-out from AlcatelCable and has currently a workforceof approx. 100 employees worldwide.The company is based in two locationsin Germany, the headquarters inHueckelhoven-Baal, near Düsseldorfand a second office in Kornwestheim,near Stuttgart. Further internationaloffices were founded in China andJapan for the growing Asian market.The company develops and manufacturesproducts in the field of interactiveFTTH-, Video Overlay-, RFoG- andHFC-networks for high performancedata, telephone and cable TV services.The active and passive componentsare designed and manufactured incompany-own facilities. The high qualityproducts as well as the comprehensivesupport in designing optical networksmake BKtel to one of the leadinginternational suppliers in the FTTH andHFC market.Our ProductsBKtel develops FTTH, Video Overlay,RFoG and HFC broadband networksand related network management. Theproduct portfolio includes a wide rangeof products starting from opticaltransmitters, optical amplifiers, opticalreceivers, optical return channel systems,customer premises equipment up toDWDM technology for upstream anddownstream applications. The ownmanufacturing facilities guaranteea high quality standard (ISO 9001certified). Furthermore the companyoffers a complete range of services suchas planning, installation and training.14FTTHFTTH 15

Headquarter:BKtel communications GmbHBenzstrasse 441836 Hückelhoven-BaalGermanyPhone: +49 (0) 24 33 / 91 22-0Fax: +49 (0) 24 33 / 91 22-99Office Kornwestheim:Bahnhofstrasse 8270806 KornwestheimGermanyPhone: +49 (0) 71 54 / 1 59 90-0Fax: +49 (0) 71 54 / 1 59 90-77Representations:BKtel communications Beijing Ltd.and BKtel communications GmbHBeijing Representation OfficeRm. 0711, Sinolife Tower56 Xizhimen North AvenueHaidian District, Beijing,100082 ChinaPhone: +86 10 8229 3065Fax: +86 10 8229 3224BKtel Pacific Rim (Japan) Inc.Katsukou Building 5F1-2-8, Hourai-cho, Naka-ku,Yokohama, Kanagawa 231-0048,JapanPhone: +81 45 350 5447Fax: +81 45 350 546006/2012 FTTH Solutions16FTTxBKtel local agents:France:André Balvabalva@bktel.comSpain:Rafael Leon Lindeleon@bktel.comSouth East Asia:Roland Wuerthwuerth@bktel.comInternet: http://www.bktel.comEmail: info@bktel.comAustralia / New Zealand:John Nixonnixon@bktel.comUnited Arab Emirates:Ünal Güzelguezel@bktel.com