DYNAPRO - Grass America, Inc.

DynaproFeatures and BenefitsFeatures• Synchronization for smooth, silent operation• Ridges on drawer member and front locking devices forimmediate connection• Support roller for uniform drawer front height• 3-D adjustment - tilt, height, and side - is simple, tool free andeasily accessible• Easy to open with a low pull-out force• Wide drawer member provides stability between cabinet anddrawer member• Synchronization for smooth,• Uniform height position ofdrawer front panel regardless ofweight due to the support roller.silent operation.• Excellent running performance, even withheavy loads, due to the world’s firstsynchronization in concealeddrawer slides.• Ridges on the slide and front lockingdevice connect immediately atinstallation for maximum connectionbetween the drawer slide and frontlocking device.• Available for 5/8” (16 mm) or 3/4” (19 mm) drawer material.But it’s not only the end user who benefitsfrom these technical developments. Forinstallers and cabinet manufacturers,Dynapro offers precise drawer frontalignment due to the addition of the threedimensional adjustment feature.6

Features• Wear resistant nylon rollers ensure quiet and precise running characteristics• Easy to open with a low pull out force• Support roller for uniform drawer front height• 88 lb dynamic load for Dynapro Standard• 110 lb dynamic load for Dynapro Extended lengths• 132 lb dynamic load for Dynapro Heavy Duty• Minimal drawer front gap using the integrated 2-D adjustment• Extended length for 27” and 30” drawers• Superior stability provided by31 mm wide drawer members.Suitable for drawer widths of up to 48”.• Abrasion resistant nylon rollersensure smooth and even operation.• Sensomatic - for handle-free drawers7

Adjustment adapter• Provides tilt adjustment with Dynapro 3-D,Dynapro 3-D heavy duty, and Dynapro 3-Dextended lengths• Tilt adjustment +4 mm (5/32”)• For Frameless or Face Frame applicationPre-drilling recommendedØ2.5 mm (3/32”)32(1 1/4´´)10(3/8´´) 32(1 1/4´´)min. 7(1/4´´)Patent Pending15(19/32´´)min. 35(1 3/8´´)Tilt adjustment +4 mm (5/32´´)Rear mounting socket for 12” - 21” slides• For 12” - 21” drawers• For Face Frame applicationPre-drilling recommendedØ2.5 mm (3/32”)2.5(1/8´´)48(1 7/8´´)44(1 3/4´´)14(9/16´´)32(1 1/4´´)21(13/16´´)17(11/16´´)Narrow rear mounting socket for 12” - 21” slides9(3/8´´)• For 12” - 21” drawers• For Face Frame applicationPre-drilling recommendedØ2.5 mm (3/32”)50.5(2")42.5(1 11 /16")37(1 7 /16") 14.4( 9 /16")28(1 1 /8")4( 3 /16")4( 3 /16")48(1 7 /8")14( 9 /16")32(1 1 /4")26.5(1 1 /16")2.5( 1 /8")20.5( 13 /16")16.5( 5 /8")4.1( 3 /16")Rear mounting socket for 9” slide• For 9” drawer• For Face Frame application• For installation depth min. 269 mm(10 19 ⁄32”) to 299 mm (11 3 ⁄4”)Pre-drilling recommendedØ2.5 mm (3/32”)36.5(1 7 /16")150(5 29 /32")110(4 11 /32")32(1 1 /4")36(1 13 /32")9

Technical informationfor DynaproDynapro Application• For drawer material from 1/2” (12.5 mm) up to 3/4” (19 mm)• For frameless or face frame application• Use rear socket for face frame application• Heavy duty and extended length slidesmust be blocked out forface frame applicationInserting the drawerPlace drawer on extended Dynapro slide andpush in until it engages audiblyDisengaging the drawerPull the drawer out, squeezethe locking device levers andlift drawer from the slide.Front locking deviceNarrow and Eco front locking deviceWeight Capacitieslbs.Dynapro 2-D: 88 lbs dynamic load ratingDynapro 3-D: 88 lbs dynamic load ratingDynapro 3-D Heavy Duty: 132 lbs dynamic load ratingDynapro 3-D Extended Lengths: 110 lbs. dynamic load ratingDynapro exceeds BHMA Grade 1 testing requirements10

Height adjustment (max. +3.5 mm)DynaproFront locking device Narrow front locking device Eco front locking deviceSide adjustment (max. ±1.5 mm)Dynapro1 Adjust both wheels in the same directionFor 3-D application only:2 Disengage drawer3 Re-attach drawerTilt adjustment (max. +4.0 mm)Dynapro11

Technical informationfor Dynapro 2-D drawer slideInstallationFramelessFace FrameDepthDepthWidthWidthHeightHeightmin. 266 (10 15/32´´)229 (9´´)min. 327 (12 7/8´ ´ )305 (12´´)min. 403 (15 7/8´´)381 (15´´)min. 479 (18 27/32”)457 (18´´)min. 555 (21 27/32”)533 (21´´)4 (5/32´´) Setbackmax. 299 (11 3/4´´)min. 269 (10 19/32´´)229 (9´´)max. 370 (14 9/16´´)min. 327 (12 7/8´´)305 (12´´)max. 446 (17 9/16´´)min. 403 (15 7/8´´)381 (15´´)max. 522 (20 9/16´´)min. 479 (18 27/32”)457 (18´´)max. 598 (23 9/16´´)min. 555 (21 27/32”)533 (21´´)4 (5/32´´) Setback229 (9´´)305 (12´´)381 (15´´)457 (18´´)533 (21´´)109(3/8´´)6,3(1/4´´)37(1 7/16´´)10(25/64´´)24(15/16´´)361 7/16´´)Setback 4 (5/32´´)NoteAttaching the cabinet members:The recommendations for screws are guidelines only.Installers need to ensure that the cabinet wall is adequate.12

Technical informationfor Dynapro 2-D drawer slideDrawer measurementsDrawerFrontDrawerBack10 ( 3 /8")-13 m m ( 1 /2")LengthofDrawer9" - 12" - 15" - 18" - 21"4th SideM in.35 m m(1 3/8”)Hole-ø 6m m (1/4”)9.5m m (3/8”)deepM in.35 m m(1 3 /8") 11 m m (7/16”)7m m(9/32”)7 m m(9/32”)11 m m(7/16”)Drawer Installation dimensionsmin. 37 (1 15/32“)min. 7 (1/4“)10 (3/8“)Inside Drawer Width = Inside Cabinet Width -ABCCMaxAInside Cabinet Width+0-1.5min. Inside DrawerWidth = 180 mm (7 3/32“)Drawer material thickness 13 - 16 16 - 1942 (1 21 ⁄32”) 50 (1 31 ⁄32”)21 ( 13 ⁄32”) 25 ( 31 ⁄32”)BCmax.13 (1/2“) min. 53 (2 1/16“)min.10 (3/8“)Rear mountingbracket Installationfor face frame cabinets2.5(1/8´´)48(1 7/8´´)Pre-drilling recommendedØ2.5 mm (3/32”)44(1 3/4´´)32(1 1/4´´)17(11/16´´)2113/16´´)14(9/16´´)9(3/8´´)Drawer applicationsFour sided drawer overlay application with decorativedrawer frontInterior drawer without decorative drawer frontInterior drawer measurementsZOverall Cabinet Interior DepthYZ = Set-back. Set-back = Decorative drawer front thicknessplus 5 mm (3/16")Y = Overall cabinet depth minus set-back13

Technical informationfor Dynapro 3-D drawer slideInstallationFramelessFace FrameDepthDepthWidthWidthHeightHeightmin. 266 (10 15/32´´)229 (9´´)min. 327 (12 7/8´ ´ )305 (12´´)min. 403 (15 7/8´´)381 (15´´)min. 479 (18 27/32”)457 (18´´)min. 555 (21 27/32”)533 (21´´)4 (5/32´´) Setbackmax. 299 (11 3/4´´)min. 269 (10 19/32´´)229 (9´´)max. 370 (14 9/16´´)min. 327 (12 7/8´´)305 (12´´)max. 446 (17 9/16´´)min. 403 (15 7/8´´)381 (15´´)max. 522 (20 9/16´´)min. 479 (18 27/32”)457 (18´´)max. 598 (23 9/16´´)min. 555 (21 27/32”)533 (21´´)4 (5/32´´) Setback229 (9´´)305 (12´´)381 (15´´)457 (18´´)533 (21´´)10Frameless Heavy Duty and Extended Lengths4 (5/32´´) Setbackmin. 479(18 27/32´´)457 (18´´)457 (18´´)9(3/8´´)6,3(1/4´´)37(1 7/16´´)10(25/64´´)min. 555 (21 27/32´´)533 (21´´)min. 632 (24 7/8”)610 (24´´)533 (21´´)Setback 4 (5/32´´)24(15/16´´)361 7/16´´)min. 708 (27 7/8”)686 (27´´)610 (24´´)686 (27´´)min. 784 (30 7/8”)762 (30´´)762 (30´´)NoteAttaching the cabinet members:The recommendations for screws are guidelines only.Installers need to ensure that the cabinet wall is adequate.NOTE:Heavy duty and extended length slides canbe blocked out for face frame application.14

Technical informationfor Dynapro 3-D drawer slideDrawer measurementsAdjustment adapterBack10 ( 3 /8")-13 m m ( 1 /2")M in.35 m m(1 3 /8")DrawerDrawerFrontLengthofDrawer9" - 12" - 15" - 18" - 21"24" - 27" - 30"4th SideM in.35 m m(1 3/8”)15(19/32“) 32 (1 1/4“)10(3/8“) 32 (1 1/4“)min.35(1 3/8“)Tilt Adjustment+ 4 mm (5/32“)7 (1/4“)Drawer Installation dimensionsmin. 37 (1 15/32“)min. 7 (1/4“)10 (3/8“)Inside Drawer Width = Inside Cabinet Width -CMaxAInside Cabinet Width+0-1.5min. Inside DrawerWidth = 180 mm (7 3/32“)BCmax.13 (1/2“) min. 53 (2 1/16“)min.10 (3/8“)Rear mountingbracket Installationfor face frame cabinets2.5(1/8´´)48(1 7/8´´)44(1 3/4´´)32(1 1/4´´)2113/16´´)14(9/16´´)17(11/16´´)9(3/8´´)ABCDrawer material thickness 13 - 16 16 - 1942 (1 21 ⁄32”) 50 (1 31 ⁄32”)21 ( 13 ⁄32”) 25 ( 31 ⁄32”)Pre-drilling recommendedØ2.5 mm (3/32”)Drawer applicationsFour sided drawer overlay application with decorativedrawer frontInterior drawer without decorative drawer frontInterior drawer measurementsZOverall Cabinet Interior DepthYZ = Set-back. Set-back = Decorative drawer front thicknessplus 5 mm (3/16")Y = Overall cabinet depth minus set-back15

Dynapro 16, Full Extension Slide, 2-D, FramelessIntegrated Soft-close with 2-dimensional adjustment for 5 ⁄8” (16 mm ) Drawer material• Frameless application for 5/8” (16 mm) drawer material• Full extension with a synchronized mechanism• Soft-close damping system• Maximum connection to drawer slideand front locking device• Integrated 2-dimensional adjustment for alignment• Height adjustment + 3.5 mm with suitable front locking device• Side adjustment ± 1.5 mm with suitable front locking device• 88 lbs. load rating (40 kg)Dynapro 16 full extension slide, 88 lbs (40 kg)Drawer length Nominal length Min Installation Depth Item No. PU229 (9”) 262 (10 5 ⁄16”) 266 (10 15 ⁄32”) F130100733204 5305 (12”) 323 (12 23 ⁄32”) 327 (12 7 ⁄8”) F130100734204 5381 (15”) 399 (15 23 ⁄32”) 403 (15 7 ⁄8”) F130100735204 5457 (18”) 475 (18 11 ⁄16”) 479 (18 27 ⁄32”) F130100736204 5533 (21”) 551 (21 11 ⁄16”) 555 (21 27 ⁄32”) F130100737204 5Locking devices1Description Item No. PU1(Please order separately)Front locking device, left F134125000233 200Front locking device, right F134125001233 200Front locking device, left and right, set F134101400104 522Narrow front locking device, left F134100699233 200Narrow front locking device, right F134100700233 2003Eco front locking device, left F134101221233 200Eco front locking device, right F134101222233 200Eco front locking device, left and right, set F134101220517 534Eco front locking device with flange, left F134116420233 200Eco front locking device with flange, right F134116421233 2004PU = Packaging Unit16 Dimensions in millimeters, fractional inch equivalents as noted.

Cabinet TypeFramelessDrawer Material (5/8 ) 16 mmDynamic Load88 lbs. (40 kg)Static Load 100 lbs. (45Drawer MeasurementsDrawerInset drawerDrawerBack10 m m ( 3 /8”)-13 m m ( 1 /2")DrawerFrontLengthofDrawer9" - 12" - 15" - 18" - 21"4th Sidemin. 7 (9/32”)DLmin. 12(15/32”)37 (1 15/32”)X = NL +4 (5/32”)min. 7 (9/32”)37 (1 15/32”) DL16(5/8”)min. 12(5/32”)7.5 (9/32“)19 (3/4“)M in.35 m m(1 3 /8") 11 m m ( 7 /16”)7 m m ( 9 /32”)Front locking device installationHole-ø 6m m (1/4”)9.5m m (3/8”)deepH +3.5 mm (+ 1/8“)90 (3 9/16“) 90 (3 9/16“)S 1.5 mm (± 1/16“)min. 55 23 (7/8“)(2 5/32“)Pre-drilling recommended Ø2.5 mm (3/32“)Mounting position for front cabinet profileDL = drawer lengthNL = nominal lengthX = minimum installation depthDrawer installation dimensionsmin. 37 (1 15/32“)min. 7 (1/4“)10 (3/8“)Inside Drawer Width = Inside Cabinet Width - 42 (1 21/32“)21(13/16“)max.16(5/8“)Cabinet member boring specificationsmin. Inside DrawerWidth = 180 mm (7 3/32“)Inside Cabinet WidthX = NL +21(13/16”)+0-1.5min. 53 (2 1/16“)21 (13/16“)max.13 (1/2“)min.10 (3/8“)Front edge18Min 266 (10 15/32”)229 (9”)4 (5/32”) Setback9 23 910229 (9´´)12Min 327 (12 7/8”)305 (12”)305 (12´´)28Min 403 (15 7/8”)381 (15”)37381 (15´´)Pre-drilling recommended Ø2.5 mm (3/32”).Min 479 (18 27/32”)457 (18”)457 (18´´)Min 555 (21 27/32”)533(21´´)IDW = inside drawer widthICW = inside cabinet widthH = height adjustmentS = side adjustmentX = minimum installation depth517453357261229165133693710533 (21´´)All dimensions in millimeters.Subject to technical modifications without notice. 17

Dynapro 16, Full extension slide, 2-D, Face FrameIntegrated Soft-close with 2-dimensional adjustment for 5 ⁄8” (16 mm ) Drawer material• Face frame application for 5/8” (16 mm) drawer material• Full extension with a synchronized mechanism• Soft-close damping system• Maximum connection to drawer slide and front locking device• Integrated 2-dimensional adjustment for alignment• Height adjustment + 3.5 mm with suitable front locking device• Side adjustment ± 1.5 mm with suitable front locking device• 88 lbs. load rating (40 kg)Dynapro 16 full extension slide, 88 lbs (40 kg)Drawer length Nominal length Min Installation Depth Max Installation Depth Item No. PU229 (9”) 262 (10 5 ⁄16”) 269 (10 19 ⁄32”) 299 (11 3 ⁄4”) F130100733204 5305 (12”) 323 (12 23 ⁄32”) 327 (12 7 ⁄8”) 370 (14 9 ⁄16”) F130100734204 5381 (15”) 399 (15 23 ⁄32”) 403 (15 7 ⁄8”) 446 (17 9 ⁄16”) F130100735204 5457 (18”) 475 (18 11 ⁄16”) 479 (18 27 ⁄32”) 522 (20 9 ⁄16”) F130100736204 5533 (21”) 551 (21 11 ⁄16”) 555 (21 27 ⁄32”) 598 (23 17 ⁄32”) F130100737204 5Locking devices and rear mounting sockets12Description Item No. PU1(Please order separately)Front locking device, left F134125000233 200Front locking device, right F134125001233 200Front locking device, left and right, set F134101400104 534234Narrow front locking device, left F134100699233 200Narrow front locking device, right F134100700233 200Eco front locking device, left F134101221233 200Eco front locking device, right F134101222233 200Eco front locking device, left and right, set F134101220517 5Eco front locking device with flange, left F134116420233 200Eco front locking device with flange, right F134116421233 200556Rear mounting sockets, non-handed for 12”-21” slides 7950.VE300 3007950.VE20 20Narrow rear mounting sockets, non-handed for 12”-21” slides 7951.VE300 30067Rear mounting socket for 9” slide, set 00433-37 51 each left and right socket, 4 x #M5 x 8 screw7PU = Packaging Unit18 Dimensions in millimeters, fractional inch equivalents as noted.

Dynapro 19, Full Extension Slide, 2-D, FramelessIntegrated Soft-close with 2-dimensional adjustment for 3 ⁄4”(19 mm) Drawer material• Frameless application for 3/4” (19 mm) drawer material• Full extension with a synchronized mechanism• Soft-close damping system• Maximum connection to drawer slide and front locking device• Integrated 2-dimensional adjustment for alignment• Height adjustment + 3.5 mm with suitable front locking device• Side adjustment ± 1.5 mm with suitable front locking device• 88 lbs. load rating (40 kg)Dynapro 19 full extension slide, 88 lbs (40 kg)Drawer length Nominal length Min Installation Depth Item No. PU229 (9”) 262 (10 5 ⁄16”) 266 (10 15 ⁄32”) F130101248204 5305 (12”) 323 (12 23 ⁄32”) 327 (12 7 ⁄8”) F130101249204 5381 (15”) 399 (15 23 ⁄32”) 403 (15 7 ⁄8”) F130101250204 5457 (18”) 475 (18 11 ⁄16”) 479 (18 27 ⁄32”) F130101251204 5533 (21”) 551 (21 11 ⁄16”) 555 (21 27 ⁄32”) F130101252204 5Locking devices1Description Item No. PU1(Please order separately)Front locking device, left F134125000233 200Front locking device, right F134125001233 200Front locking device, left and right, set F134101400104 522Narrow front locking device, left F134100699233 200Narrow front locking device, right F134100700233 2003Eco front locking device, left F134101221233 200Eco front locking device, right F134101222233 200Eco front locking device, left and right, set F134101220517 534Eco front locking device with flange, left F134116420233 200Eco front locking device with flange, right F134116421233 2004PU = Packaging Unit20 Dimensions in millimeters, fractional inch equivalents as noted.

Cabinet TypeFramelessDrawer Material (3/4 ) 19 mmDynamic Load88 lbs. (40 kg)Static Load 100 lbs. (45Drawer MeasurementsDrawerInset drawerDrawerBack10 m m ( 3 /8”)-13 m m ( 1 /2")DrawerFrontLengthofDrawer9" - 12" - 15" - 18" - 21"4th Sidemin. 7 (9/32”)DLmin. 12(15/32”)37 (1 15/32”)X = NL +4 (5/32”)min. 7 (9/32”)37 (1 15/32”) DL16(5/8”)min. 12(5/32”)7.5 (9/32“)19 (3/4“)M in.35 m m(1 3 /8") 11 m m ( 7 /16”)7 m m ( 9 /32”)Front locking device installationHole-ø 6m m (1/4”)9.5m m (3/8”)deepH +3.5 mm (+ 1/8“)90 (3 9/16“) 90 (3 9/16“)S 1.5 mm (± 1/16“)min. 55 23 (7/8“)(2 5/32“)Pre-drilling recommended Ø2.5 mm (3/32“)Mounting position for front cabinet profileDL = drawer lengthNL = nominal lengthX = minimum installation depthDrawer installation dimensionsmin. 37 (1 15/32“)min. 7 (1/4“)10 (3/8“)25 (31/32“)Inside Drawer Width = Inside Cabinet Width - 50 (1 31/32“)max.19(3/4“)Cabinet member boring specificationsmin. Inside DrawerWidth = 180 mm (7 3/32“)Inside Cabinet WidthX = NL +21(13/16”)+0-1.5min. 53 (2 1/16“)max.13 (1/2“)min.10 (3/8“)25 (31/32“)Front edge4 (5/32”) Setback189 23 910Min 266 (10 15/32”)229 (9”)229 (9´´)12Min 327 (12 7/8”)305 (12”)305 (12´´)3728Min 403 (15 7/8”)381 (15”)Pre-drilling recommended Ø2.5 mm (3/32”).381 (15´´)Min 479 (18 27/32”)457 (18”)457 (18´´)Min 555 (21 27/32”)533(21´´)IDW = inside drawer widthICW = inside cabinet widthH = height adjustmentS = side adjustmentX = minimum installation depth517453357261229165133693710533 (21´´)All dimensions in millimeters.Subject to technical modifications without notice. 21

Dynapro 19, Full extension slide, 2-D, Face FrameIntegrated Soft-close with 2-dimensional adjustment for 3 ⁄4”(19 mm) Drawer material• Face frame application for 3/4” (19 mm) drawer material• Full extension with a synchronized mechanism• Soft-close damping system• Maximum connection to drawer slide and front locking device• Integrated 2-dimensional adjustment for alignment• Height adjustment + 3.5 mm with suitable front locking device• Side adjustment ± 1.5 mm with suitable front locking device• 88 lbs. load rating (40 kg)Dynapro 19 full extension slide, 88 lbs (40 kg)Drawer length Nominal length Min Installation Depth Max Installation Depth Item No. PU229 (9”) 262 (10 5 ⁄16”) 269 (10 19 ⁄32”) 299 (11 3 ⁄4”) F130101248204 5305 (12”) 323 (12 23 ⁄32”) 327 (12 7 ⁄8”) 370 (14 9 ⁄16”) F130101249204 5381 (15”) 399 (15 23 ⁄32”) 403 (15 7 ⁄8”) 446 (17 9 ⁄16”) F130101250204 5457 (18”) 475 (18 11 ⁄16”) 479 (18 27 ⁄32”) 522 (20 9 ⁄16”) F130101251204 5533 (21”) 551 (21 11 ⁄16”) 555 (21 27 ⁄32”) 598 (23 17 ⁄32”) F130101252204 5Locking devices and rear mounting sockets12Description Item No. PU1(Please order separately)Front locking device, left F134125000233 200Front locking device, right F134125001233 200Front locking device, left and right, set F134101400104 534234Narrow front locking device, left F134100699233 200Narrow front locking device, right F134100700233 200Eco front locking device, left F134101221233 200Eco front locking device, right F134101222233 200Eco front locking device, left and right, set F134101220517 5Eco front locking device with flange, left F134116420233 200Eco front locking device with flange, right F134116421233 200556Rear mounting sockets, non-handed for 12”-21” slides 7950.VE300 3007950.VE20 20Narrow rear mounting sockets, non-handed for 12”-21” slides 7951.VE300 30067Rear mounting socket for 9” slide, set 00433-37 51 each left and right socket, 4 x #M5 x 8 screw7PU = Packaging Unit22 Dimensions in millimeters, fractional inch equivalents as noted.

Cabinet TypeFace FrameDrawer Material 3/4 (19mm)Dynamic Load88 lbs. (40 kg)Static Load 100 lbs. (45Drawer MeasurementsDrawerInset drawerFront locking device installation7.5 (9/32“)19 (3/4“)DrawerBack10 m m ( 3 /8”)-13 m m ( 1 /2")DrawerFrontLengthofDrawer9" - 12" - 15" - 18" - 21"Mounting position for front cabinet profileFront edge4th SideM in.35 m m(1 3 /8") 11 m m ( 7 /16”)7 m m ( 9 /32”)Hole-ø 6m m (1/4”)9.5m m (3/8”)deepH +3.5 mm (+ 1/8“)90 (3 9/16“) 90 (3 9/16“)S 1.5 mm (± 1/16“)min. 55 23 (7/8“)(2 5/32“)Pre-drilling recommended Ø2.5 mm (3/32“)min. 37 (1 15/32“)min. 7 (9/32”)min. 7 (1/4“)10 (3/8“)37 (1 15/32”)DLmin. 12(15/32”)X = NL +4 (5/32”)DL = drawer lengthNL = nominal lengthX = minimum installation depthDrawer installation dimensionsCabinet member boring specificationsmin. 7 (9/32”)37 (1 15/32”) DL16(5/8”)Inside Drawer Width = Inside Cabinet Width - 50 (1 31/32“)25 (31/32“)max.19(3/4“)min. Inside DrawerWidth = 180 mm (7 3/32“)Inside Cabinet WidthX = NL +21(13/16”)+0-1.54(5/32´´) SetbackDrawer Bottom Clearance25 (31/32“)min. 12(5/32”)max.13 (1/2“) min. 53 (2 1/16“)min.10 (3/8“)189 23 910max. 299 (11 3/4´´)min. 269 (10 19/32´´)229 (9´´)229 (9´´)12max. 370 (14 9/16´´)min. 327 (12 7/8´´)305 (12´´)305 (12´´)3728Pre-drilling recommended Ø2.5 mm (3/32”).max. 446 (17 9/16´´)min. 403 (15 7/8´´)381 (15´´)max. 522 (20 9/16´´)min. 479 (18 27/32´´)457 (18´´)381 (15´´)457 (18´´)max. 598 (23 17/32´´)min. 555 (21 27/32´´)533 (21´´)IDW = inside drawer widthICW = inside cabinet widthH = height adjustmentS = side adjustmentX = minimum installation depth *For rear mount socket installation, please see page 9.517453357261229165133693710533 (21´´)All dimensions in millimeters.Subject to technical modifications without notice. 23

Dynapro 16, Full Extension Slide, 3-D, FramelessIntegrated Soft-close with 3-dimensional tilt adjustment for 5 ⁄8”(16 mm) Drawer material• Frameless application for 5/8” (16 mm) drawer material• Full extension with a synchronized mechanism• Soft-close damping system• Maximum connection drawer slide and front locking device• Integrated 3-dimensional adjustment for alignment• Height adjustment + 3.5 mm• Side adjustment ± 1.5 mm• Tilt adjustment + 4.0 mm• 88 lbs. load rating (40 kg)Dynapro 16 full extension slide, 88 lbs. (40 kg)Drawer length Nominal length Min installation depth Item No. PU229 (9”) 262 (10 5 ⁄16”) 266 (10 5 ⁄16”) F130100725204 5305 (12”) 323 (12 23 ⁄32”) 327 (12 7 ⁄8”) F130100726204 5381 (15”) 399 (15 23 ⁄32”) 403 (15 7 ⁄8”) F130100727204 5457 (18”) 475 (18 11 ⁄16”) 479 (18 27 ⁄32”) F130100728204 5533 (21”) 551 (21 11 ⁄16”) 555 (21 27 ⁄32”) F130100729204 5For extended lengths, 686 (27”) and 762 (30”), see page 32.Locking devices and tilt adjustment adapter1Description Item No. PU(Please order separately)Front locking device, left F134125000233 2001 Front locking device, right F134125001233 200Front locking device, left and right set F134101400104 522Narrow front locking device, left F134100699233 200Narrow front locking device, right F134100700233 200334Adjustment adapter, left F134125002233 200Adjustment adapter, right F134125003233 200Front locking device and adjustment adapter set F134125074517 1Set includes 1 Front locking device, and 3 Adjustment adapterPU = Packaging Unit24 Dimensions in millimeters, fractional inch equivalents as noted.

Drawer measurementsDrawerCabinet TypeFramelessDrawer Material 5/8 (16mm)Dynamic Load88 lbs. (40 kg)Static Load 100 lbs. (45AdapterTiltInset drawer10 m m ( 3 /8”)-13 m m ( 1 /2")DrawerBackDrawerFrontLengthofDrawer9" - 12" - 15" - 18" - 21"4th Sidemin. 7 (9/32”)DLmin. 12(15/32”)37 (1 15/32”)X = NL +4 (5/32”)min. 7 (9/32”)37 (1 15/32”)DL16(5/8”)min. 12(5/32”)Front locking device installation7.5 (9/32“)19 (3/4“)M in.35 m m(1 3 /8")H +3.5 mm (+ 1/8“)90 (3 9/16“) 90 (3 9/16“)S 1.5 mm (± 1/16“)min. 55 23 (7/8“)(2 5/32“)Pre-drilling recommended Ø2.5 mm (3/32“)Adjustment adapter installationmin. 37 (1 15/32“)DL = drawer lengthNL = nominal lengthX = minimum installation depthDrawer installation dimensionsmin. 7 (1/4“)10 (3/8“)Inside Drawer Width = Inside Cabinet Width - 42 (1 21/32“)21(13/16“)max.16(5/8“)Cabinet member boring specificationsmin. Inside DrawerWidth = 180 mm (7 3/32“)Inside Cabinet WidthX = NL +21(13/16”)+0-1.5min. 53 (2 1/16“)21 (13/16“)max.13 (1/2“)min.10 (3/8“)4 (5/32´´) Setback10 (3/8“)min. 35 ( 1 3 / 8 “ )Front edge189 23 9 10Min 266 (10 15/32”)229 (9”)10(3/8“) 32 (1 1/4“)7 (1/4“)12229 (9´´)15(19/32“) 32 (1 1/4“)2837Min 327 (12 7/8”)305 (12”)Min 403 (15 7/8”)381 (15”)305 (12´´)min.35(1 3/8“)Tilt Adjustment+ 4 mm (5/32“)381 (15´´)Pre-drilling recommended Ø2.5 mm (3/32”).Min 479 (18 27/32”)457 (18”)457 (18´´)Min 555 (21 27/32”)533 (21´´)533 (21´´)IDW = inside drawer widthICW = inside cabinet widthH = height adjustmentS = side adjustmentX = minimum installation depth517453357261229165133693710All dimensions in millimeters.Subject to technical modifications without notice. 25

Dynapro 16, Full extension slide, 3-D, Face FrameIntegrated Soft-close with 3-dimensional tilt adjustment for 5 ⁄8”(16 mm) Drawer material• Face frame application for 5/8” (16 mm) drawer material• Full extension with a synchronized mechanism• Soft-close damping system• Maximum connection to drawer slide and front locking device• Integrated 3-dimensional adjustment for alignment• Height adjustment + 3.5 mm• Side adjustment ± 1.5 mm• Tilt adjustment + 4.0 mm• 88 lbs. load rating (40 kg)Dynapro 16 full extension slide, 88 lbs (40 kg)Drawer length Nominal length Min Installation Depth Max Installation Depth Item No. PU229 (9”) 262 (10 5 ⁄16”) 269 (10 19 ⁄32”) 299 (11 3 ⁄4”) F130100725204 5305 (12”) 323 (12 23 ⁄32”) 327 (12 7 ⁄8”) 370 (14 9 ⁄16”) F130100726204 5381 (15”) 399 (15 23 ⁄32”) 403 (15 7 ⁄8”) 446 (17 9 ⁄16”) F130100727204 5457 (18”) 475 (18 11 ⁄16”) 479 (18 27 ⁄32”) 522 (20 9 ⁄16”) F130100728204 5533 (21”) 551 (21 11 ⁄16”) 555 (21 27 ⁄32”) 598 (23 17 ⁄32”) F130100729204 5For extended lengths, 686 (27”) and 762 (30”), see page 32.Locking devices and rear adjustment adapter12Description Item No. PU(Please order separately)Front locking device, left F134125000233 2001 Front locking device, right F134125001233 200Front locking device, left and right, set F134101400104 52 Narrow front locking device, left F134100699233 200Narrow front locking device, right F134100700233 20033 Adjustment adapter, left F134125002233 200Adjustment adapter, right F134125003233 20044 Rear mounting sockets, non-handed for 12”-21” slides 7950.VE300 3007950.VE20 205 Narrow rear mounting sockets, non-handed for 12”-21” slides 7951.VE300 30056 Rear mounting socket for 9” slide, set 00433-37 51 each left and right socket, 4 #M5 x 8 screws7 Front locking device and adjustment adapter set F134125074517 1Set includes 1 Front locking device, and 3 Adjustment adapter6PU = Packaging Unit26 Dimensions in millimeters, fractional inch equivalents as noted.

Drawer MeasurementDrawerCabinet TypeFace FrameDrawer Material 5/8 (16 mm)Dynamic Load88 lbs. (40 kg)Static Load 100 lbs. (45AdapterTiltInset drawer10 m m ( 3 /8”)-13 m m ( 1 /2")DrawerBackDrawerFrontLengthofDrawer9" - 12" - 15" - 18" - 21"4th Sidemin. 7 (9/32”)DLmin. 12(15/32”)37 (1 15/32”)X = NL +4 (5/32”)min. 7 (9/32”)37 (1 15/32”) DL16(5/8”)min. 12(5/32”)M in.35 m m(1 3 /8")DL = drawer lengthNL = nominal lengthX = minimum installation depthX = NL +21(13/16”)Front locking device installationH +3.5 mm (+ 1/8“)90 (3 9/16“) 90 (3 9/16“)7.5 (9/32“)19 (3/4“)S 1.5 mm (± 1/16“)min. 55 23 (7/8“)(2 5/32“)Pre-drilling recommended Ø2.5 mm (3/32“)Adjustment adapter installationmin. 37 (1 15/32“)min. 7 (1/4“)10 (3/8“)Drawer Installation dimensionsInside Drawer Width = Inside Cabinet Width - 42 (1 21/32“)21(13/16“)max.16(5/8“)Cabinet member boring specificationsmin. Inside DrawerWidth = 180 mm (7 3/32“)Inside Cabinet Width+0-1.5Drawer Bottom Clearance21 (13/16“)max.13 (1/2“) min. 53 (2 1/16“)min.10 (3/8“)10 (3/8“)min. 35 ( 1 3 / 8 “ )Front edge189 23 9 104(5/32´´) Setbackmax. 299 (11 3/4´´)min. 269 (10 9/32´´)229 (9´´)10(3/8“) 32 (1 1/4“)7 (1/4“)12229 (9´´)15(19/32“) 32 (1 1/4“)min.35(1 3/8“)Tilt Adjustment+ 4 mm (5/32“)2837max. 370 (14 9/16´´)min. 327 (12 7/8´´)305 (12´´)max. 446 (17 9/16´´)min. 403 (15 7/8´´)381 (15´´)305 (12´´)381 (15´´)Pre-drilling recommended Ø2.5 mm (3/32”).max. 522 (20 9/16´´)min. 479 (18 27/32´´)457 (18´´)457 (18´´)max. 598 (23 9/16´´)min. 555 (21 27/32´´)533 (21´´)533 (21´´)IDW = inside drawer widthICW = inside cabinet widthH = height adjustmentS = side adjustmentX = minimum installation depth *For rear mount socket installation, please see page 9.517453357261229165133693710All dimensions in millimeters.Subject to technical modifications without notice. 27

Dynapro 19, Full Extension Slide, 3-D, FramelessIntegrated Soft-close with 3-dimensional tilt adjustment for 3 ⁄4”(19 mm) Drawer material• Frameless application for 3/4” (19 mm) drawer material• Full extension with a synchronized mechanism• Soft-close damping system• Maximum connection drawer slide and front locking device• Integrated 3-dimensional adjustment for alignment• Height adjustment + 3.5 mm• Side adjustment ± 1.5 mm• Tilt adjustment + 4.0 mm• 88 lbs. load rating (40 kg)Dynapro 19 full extension slide, 88 lbs. (40 kg)Drawer length Nominal length Min installation depth Item No. PU229 (9”) 262 (10 5 ⁄16”) 266 (10 5 ⁄16”) F130101240204 5305 (12”) 323 (12 23 ⁄32”) 327 (12 7 ⁄8”) F130101241204 5381 (15”) 399 (15 23 ⁄32”) 403 (15 7 ⁄8”) F130101242204 5457 (18”) 475 (18 11 ⁄16”) 479 (18 27 ⁄32”) F130101243204 5533 (21”) 551 (21 11 ⁄16”) 555 (21 27 ⁄32”) F130101244204 5For extended lengths, 686 (27”) and 762 (30”), see page 34.Locking devices and tilt adjustment adapter1Description Item No. PU(Please order separately)Front locking device, left F134125000233 2001 Front locking device, right F134125001233 200Front locking device, left and right set F134101400104 522Narrow front locking device, left F134100699233 200Narrow front locking device, right F134100700233 200334Adjustment adapter, left F134125002233 200Adjustment adapter, right F134125003233 200Front locking device and adjustment adapter set F134125074517 1Set includes 1 Front locking device, and 3 Adjustment adapterPU = Packaging Unit28 Dimensions in millimeters, fractional inch equivalents as noted.

Drawer measurementsDrawerCabinet TypeFramelessDrawer Material 3/4 (19mm)Dynamic Load88 lbs. (40 kg)Static Load 100 lbs. (45AdapterTiltInset drawer10 m m ( 3 /8”)-13 m m ( 1 /2")DrawerBackDrawerFrontLengthofDrawer9" - 12" - 15" - 18" - 21"4th Sidemin. 7 (9/32”)DLmin. 12(15/32”)37 (1 15/32”)X = NL +4 (5/32”)min. 7 (9/32”)37 (1 15/32”)DL16(5/8”)min. 12(5/32”)Front locking device installation7.5 (9/32“)19 (3/4“)M in.35 m m(1 3 /8")H +3.5 mm (+ 1/8“)90 (3 9/16“) 90 (3 9/16“)S 1.5 mm (± 1/16“)min. 55 23 (7/8“)(2 5/32“)Pre-drilling recommended Ø2.5 mm (3/32“)Adjustment adapter installationmin. 37 (1 15/32“)DL = drawer lengthNL = nominal lengthX = minimum installation depthDrawer installation dimensionsmin. 7 (1/4“)10 (3/8“)Inside Drawer Width = Inside Cabinet Width - 50 (1 31/32“)25 (31/32“)max.19(3/4“)Cabinet member boring specificationsmin. Inside DrawerWidth = 180 mm (7 3/32“)Inside Cabinet WidthX = NL +21(13/16”)+0-1.5min. 53 (2 1/16“)25 (31/32“)max.13 (1/2“)min.10 (3/8“)4 (5/32´´) Setback10 (3/8“)min. 35 ( 1 3 / 8 “ )Front edge189 23 9 10Min 266 (10 15/32”)229 (9”)10(3/8“) 32 (1 1/4“)7 (1/4“)12229 (9´´)15(19/32“) 32 (1 1/4“)2837Min 327 (12 7/8”)305 (12”)Min 403 (15 7/8”)381 (15”)305 (12´´)min.35(1 3/8“)Tilt Adjustment+ 4 mm (5/32“)381 (15´´)Pre-drilling recommended Ø2.5 mm (3/32”).Min 479 (18 27/32”)457 (18”)457 (18´´)Min 555 (21 27/32”)533 (21´´)533 (21´´)IDW = inside drawer widthICW = inside cabinet widthH = height adjustmentS = side adjustmentX = minimum installation depth517453357261229165133693710All dimensions in millimeters.Subject to technical modifications without notice. 29

Dynapro 19, Full extension slide, 3-D, Face FrameIntegrated Soft-close with 3-dimensional tilt adjustment for 3 ⁄4”(19 mm) Drawer material• Face frame application for 3/4” (19 mm) drawer material• Full extension with a synchronized mechanism• Soft-close damping system• Maximum connection to drawer slide and front locking device• Integrated 3-dimensional adjustment for alignment• Height adjustment + 3.5 mm• Side adjustment ± 1.5 mm• Tilt adjustment + 4.0 mm• 88 lbs. load rating (40 kg)Dynapro 19 full extension slide, 88 lbs (40 kg)Drawer length Nominal length Min Installation Depth Max Installation Depth Item No. PU229 (9”) 262 (10 5 ⁄16”) 269 (10 19 ⁄32”) 299 (11 3 ⁄4”) F130101240204 5305 (12”) 323 (12 23 ⁄32”) 327 (12 7 ⁄8”) 370 (14 9 ⁄16”) F130101241204 5381 (15”) 399 (15 23 ⁄32”) 403 (15 7 ⁄8”) 446 (17 9 ⁄16”) F130101242204 5457 (18”) 475 (18 11 ⁄16”) 479 (18 27 ⁄32”) 522 (20 9 ⁄16”) F130101243204 5533 (21”) 551 (21 11 ⁄16”) 555 (21 27 ⁄32”) 598 (23 17 ⁄32”) F130101244204 5For extended lengths, 686 (27”) and 762 (30”), see page 34.Locking devices and rear adjustment adapter12Description Item No. PU(Please order separately)1 Front locking device, left F134125000233 200Front locking device, right F134125001233 200Front locking device, left and right, set F134101400104 52 Narrow front locking device, left F134100699233 200Narrow front locking device, right F134100700233 20033 Adjustment adapter, left F134125002233 200Adjustment adapter, right F134125003233 20044 Rear mounting sockets, non-handed for 12”-21” slides 7950.VE300 3007950.VE20 205 Narrow rear mounting sockets, non-handed for 12”-21” slides 7951.VE300 30056 Rear mounting socket for 9” slide, set 00433-37 51 each left and right socket, 4 #M5 x 8 screwsFront locking device and adjustment adapter set F134125074517 17Set includes 1 Front locking device, and 3 Adjustment adapter6PU = Packaging Unit30 Dimensions in millimeters, fractional inch equivalents as noted.

Drawer MeasurementDrawerCabinet TypeFace FrameDrawer Material 3/4 (19 mm)Dynamic Load88 lbs. (40 kg)Static Load 100 lbs. (45AdapterTiltInset drawer10 m m ( 3 /8”)-13 m m ( 1 /2")DrawerBackDrawerFrontLengthofDrawer9" - 12" - 15" - 18" - 21"4th Sidemin. 7 (9/32”)DLmin. 12(15/32”)37 (1 15/32”)X = NL +4 (5/32”)min. 7 (9/32”)37 (1 15/32”) DL16(5/8”)min. 12(5/32”)M in.35 m m(1 3 /8")DL = drawer lengthNL = nominal lengthX = minimum installation depthX = NL +21(13/16”)Front locking device installationH +3.5 mm (+ 1/8“)90 (3 9/16“) 90 (3 9/16“)7.5 (9/32“)19 (3/4“)S 1.5 mm (± 1/16“)min. 55 23 (7/8“)(2 5/32“)Pre-drilling recommended Ø2.5 mm (3/32“)Adjustment adapter installationmin. 37 (1 15/32“)min. 7 (1/4“)10 (3/8“)Drawer Installation dimensionsInside Drawer Width = Inside Cabinet Width - 50 (1 13/32“)25 (31/32“)max.19(3/4“)Cabinet member boring specificationsmin. Inside DrawerWidth = 180 mm (7 3/32“)Inside Cabinet Width+0-1.5Drawer Bottom Clearance25 (31/32“)max.13 (1/2“) min. 53 (2 1/16“)min.10 (3/8“)10 (3/8“)min. 35 ( 1 3 / 8 “ )Front edge189 23 9 104(5/32´´) Setbackmax. 299 (11 3/4´´)min. 269 (10 9/32´´)229 (9´´)229 (9´´)10(3/8“) 32 (1 1/4“)7 (1/4“)12max. 370 (14 9/16´´)min. 327 (12 7/8´´)15(19/32“) 32 (1 1/4“)min.35(1 3/8“)Tilt Adjustment+ 4 mm (5/32“)2837305 (12´´)max. 446 (17 9/16´´)min. 403 (15 7/8´´)381 (15´´)max. 522 (20 9/16´´)305 (12´´)381 (15´´)Pre-drilling recommended Ø2.5 mm (3/32”).min. 479 (18 27/32´´)457 (18´´)457 (18´´)max. 598 (23 9/16´´)min. 555 (21 27/32´´)533 (21´´)533 (21´´)IDW = inside drawer widthICW = inside cabinet widthH = height adjustmentS = side adjustmentX = minimum installation depth *For rear mount socket installation, please see page 9.517453357261229165133693710All dimensions in millimeters.Subject to technical modifications without notice. 31

Dynapro 16, Heavy Duty and Extend Length Slide, 3-D, FramelessIntegrated Soft-close with 3-dimensional tilt adjustment for 5 ⁄8”(16 mm) Drawer material• Frameless application for 5/8” (16 mm) drawer material• Full extension with a synchronized mechanism• Soft-close damping system• Maximum connection to drawer slide and front locking device• Integrated 3-dimensional adjustment for alignment• Height adjustment + 3.5 mm• Side adjustment ± 1.5 mm• Tilt adjustment + 4.0 mm• 132 lbs load rating (60 kg)Dynapro 16 full extension slide, 132 lbs (60 kg)Drawer length Nominal length Min Installation Depth Item No. PU457 (18”) 475 (18 11 ⁄16”) 479 (18 27 ⁄32”) F130100730204 5533 (21”) 551 (21 11 ⁄16”) 555 (21 27 ⁄32”) F130100731204 5610 (24”) 628 (24 23 ⁄32”) 632 (24 7 ⁄8”) F130100732204 5*686 (27”) 704 (27 23 ⁄32”) 708 (27 7 ⁄8”) F130101394203 4*762 (30”) 780 (24 23 ⁄32”) 784 (30 7 ⁄8”) F130101395203 4*Extended lengths, 110 lb (50 kg)Locking devices and adjustment adapter12Description Item No. PU(Please order separately)1 Front locking device, left F134125000233 200Front locking device, right F134125001233 200Front locking device, left and right, set F134101400104 5Adjustment adapter, left F134125002233 2002Adjustment adapter, right F134125003233 2003 Front locking device and adjustment adapter set F134125074517 1Set includes 1 Front locking device, and 3 Adjustment adapterNOTE: Heavy duty and extended length slides can be blocked out for face frame application.PU = Packaging Unit32 Dimensions in millimeters, fractional inch equivalents as noted.

Drawer MeasurmentsDrawerCabinet TypeFramelessDrawer Material 5/8 (16 mm)Dynamic Load *132 lbs. (40Static Load *150 lbs. (45AdapterTiltInset drawer10 m m ( 3 /8”)-13 m m ( 1 /2")DrawerBackDrawerFrontLengthofDrawer18" - 21" - 24" - 27” - 30”4th Sidemin. 7 (9/32”)37 (1 15/32”)DLmin. 12(15/32”)X = NL +4 (5/32”)min. 7 (9/32”)37 (1 15/32”) DL16(5/8”)min. 12(5/32”)M in.35 m m(1 3 /8")DL = drawer lengthNL = nominal lengthX = minimum installation depthX = NL +21(13/16”)Front locking device installationDrawer installation dimensions7.5 (9/32“)19 (3/4“)H +3.5 mm (+ 1/8“)90 (3 9/16“) 90 (3 9/16“)min. 55(2 5/32“)Adjustment adapter installationS 1.5 mm (± 1/16“)23 (7/8“)Pre-drilling recommended Ø2.5 mm (3/32”).min. 37 (1 15/32“)min. 7 (1/4“)10 (3/8“)Inside Drawer Width = Inside Cabinet Width - 42 (1 21/32“)21(13/16“)max.16(5/8“)Cabinet member boring specificationsmin. Inside DrawerWidth = 180 mm (7 3/32“)Inside Cabinet Width+0-1.5min. 53 (2 1/16“)21 (13/16“)max.13 (1/2“)min.10 (3/8“)10 (3/8“)min. 35 ( 1 3 / 8 “ )10(3/8“) 32 (1 1/4“)7 (1/4“)min. 479 (18 27/32´´)457 (18´´)4 (5/32´´) Setback15(19/32“) 32 (1 1/4“)min. 555 (21 27/32´´)533 (21´´)min.35(1 3/8“)Tilt Adjustment+ 4 mm (5/32“)min. 632 (24 7/8”)610 (24´´)Pre-drilling recommended Ø2.5 mm (3/32”).Front edge189 23 9 1012min. 708 (27 7/8”)686 (27´´)*2837IDW = inside drawer widthICW = inside cabinet widthH = height adjustmentS = side adjustmentX = minimum installation depth517453389*110 lbs (50kg) dynamic load and 125 lbs (60kg) static load for extended lengths261min. 784 (30 7/8”)762 (30´´)693710All dimensions in millimeters.*Subject to technical modifications without notice. 33

Dynapro 19, Heavy Duty and Extended Length Slide, 3-D, FramelessIntegrated Soft-close with 3-dimensional tilt adjustment for 3 ⁄4”(19 mm) Drawer material• Frameless application for 3/4” (19 mm) drawer material• Full extension with a synchronized mechanism• Soft-close damping system• Maximum connection to drawer slide and front locking device• Integrated 3-dimensional adjustment for alignment• Height adjustment + 3.5 mm• Side adjustment ± 1.5 mm• Tilt adjustment + 4.0 mm• 132 lbs load rating (60 kg)Dynapro 19 full extension slide, 132 lbs (60 kg)Drawer length Nominal length Min Installation Depth Item No. PU457 (18”) 475 (18 11 ⁄16”) 479 (18 27 ⁄32”) F130101245204 5533 (21”) 551 (21 11 ⁄16”) 555 (21 27 ⁄32”) F130101246204 5610 (24”) 628 (24 23 ⁄32”) 632 (24 7 ⁄8”) F130101247204 5*686 (27”) 704 (27 23 ⁄32”) 708 (27 7 ⁄8”) F130101238203 4*762 (30”) 780 (30 23 ⁄32”) 784 (30 7 ⁄8”) F130101239203 4*Extended lengths, 110 lb (50 kg)Locking devices and adjustment adapter12Description Item No. PU(Please order separately)1 Front locking device, left F134125000233 200Front locking device, right F134125001233 200Front locking device, left and right, set F134101400104 5Adjustment adapter, left F134125002233 2002Adjustment adapter, right F134125003233 2003 Front locking device and adjustment adapter set F134125074517 1Set includes 1 Front locking device, and 3 Adjustment adapterNOTE: Heavy duty and extended length slides can be blocked out for face frame application.PU = Packaging Unit34 Dimensions in millimeters, fractional inch equivalents as noted.

Drawer MeasurmentsDrawerCabinet TypeFramelessDrawer Material 3/4 (19 mm)Dynamic Load *132 lbs. (60Static Load *150 lbs. (70AdapterTiltInset drawer10 m m ( 3 /8”)-13 m m ( 1 /2")DrawerBackDrawerFrontLengthofDrawer18" - 21" - 24" - 27” - 30”4th Sidemin. 7 (9/32”)37 (1 15/32”)DLmin. 12(15/32”)X = NL +4 (5/32”)min. 7 (9/32”)37 (1 15/32”) DL16(5/8”)min. 12(5/32”)M in.35 m m(1 3 /8")DL = drawer lengthNL = nominal lengthX = minimum installation depthX = NL +21(13/16”)Front locking device installationDrawer installation dimensions7.5 (9/32“)19 (3/4“)H +3.5 mm (+ 1/8“)90 (3 9/16“) 90 (3 9/16“)min. 55(2 5/32“)Adjustment adapter installationS 1.5 mm (± 1/16“)23 (7/8“)Pre-drilling recommended Ø2.5 mm (3/32”).min. 37 (1 15/32“)min. 7 (1/4“)10 (3/8“)Inside Drawer Width = Inside Cabinet Width - 50 (1 31/32“)25 (31/32“)max.19(3/4“)Cabinet member boring specificationsmin. Inside DrawerWidth = 180 mm (7 3/32“)Inside Cabinet Width+0-1.5min. 53 (2 1/16“)25 (31/32“)max.13 (1/2“)min.10 (3/8“)10 (3/8“)min. 35 ( 1 3 / 8 “ )10(3/8“) 32 (1 1/4“)7 (1/4“)min. 479 (18 27/32´´)457 (18´´)4 (5/32´´) Setback15(19/32“) 32 (1 1/4“)min. 555 (21 27/32´´)533 (21´´)min.35(1 3/8“)Tilt Adjustment+ 4 mm (5/32“)min. 632 (24 7/8”)610 (24´´)Pre-drilling recommended Ø2.5 mm (3/32”).Front edge189 23 9 1012min. 708 (27 7/8”)686 (27´´)*2837IDW = inside drawer widthICW = inside cabinet widthH = height adjustmentS = side adjustmentX = minimum installation depth517453389*110 lbs (50kg) dynamic load and 125 lbs (60kg) static load for extended lengths261min. 784 (30 7/8”)762 (30´´)693710All dimensions in millimeters.*Subject to technical modifications without notice. 35

Accessories and assembly aidesfor DynaproDrilling template for drawerDescription Item No. PUDrilling template F146109874299 1• For front locking device• For narrow front locking device• For drawer hole hook• For adjustment adapterCentering drill bit Ø 2.5 mmThe GRASS centering drill bit is used for pre-drillingcountersink wood screws, Ø 2.5 mmDescription Item No. PUCentering drill bit 35692-01 1Inset Bracket for Dynapro• For face frame inset applications when using Dynapro.• Works with all inset applications• Bracket mounts behind the face frame, minimum 12.7 mm (1/2”) frame offset required• Slide attaches easily with one screw• Bracket includes guide markings for proper setback• Polybagged with brackets, screws, and instructions73.6(2 7/8”)41(1 5/8”)12.7(1/2”)Description Item No. PUInset bracket set 13901-37 1Inset bracket set 13901-08 50Polybag includes:2 - Universal Inset Bracket ABS Brown2 - 8 X 32 Tapped Insert for Inset bracket4 - #7 X 2" mounting screws2 - #8 - 32 X 1/2" Machine Screw FHPPU = Packaging Unit36

Wood screw, nickel platedSteel, nickel plated(Phillips)7 mm ( 1 ⁄4")7 mm ( 1 ⁄4")Type Item No. PUPanhead Ø 6 x 5/8” 499.060.58.0015 500Flathead Ø 6 x 5/8” 81001-43 5007 mm ( 1 ⁄4")Flathead Ø 6 x 3/4” 81003-43 500Euro screw, nickel platedSteel, nickel plated(Pozi)7 mm ( 1 ⁄4")Type Item No. PUEuro Screw Ø6.3 x 11mm (7/16”) 499.360.61.1015 500Euro Screw Ø6.3 x 13mm (1/2”) 499.360.61.3015 50037

DYNAPROPRECISION... IN MOVEMENT, DESIGN AND COMFORT

Precision plays an important role in cabinetand furniture design and it is our priority thathardware function intelligently.Dynapro, the new undermount slide system,features the first completely synchronizedmechanism for quiet operation, providesincreased stability for wide drawers and setsnew industry standards in load capacity.DYNAPRO – precision in design NOWwww.grassusa.com

Grass America Inc.1202 NC Highway 66 SouthKernersville, NC 27284Phone 1-800-334-3512Fax 1-800-525-8406Grass Canada Inc.475 Finchdene Square, Unit 9Toronto, ON M1X 1B7Phone 1-800-461-4975Fax 1-416-335-5907Item #01813-01-DPC-5M-MAP-8/12Internet: www.grassusa.comE-Mail: info@grassusa.comInternet: www.grasscanada.comE-Mail: info@grasscanada.com