Instruction manual - Walsh Engineering Supplies

6.2.3 Cutting with wheel guideThe wheel guide facilitates to a considerable extent manual guidance of cutting by means of easy-runningwheels. The wheel guide is attached to the torch head to the limit stop and both hexagon sockets arefastened. The correct distance between torch head and workpiece is thus established. The adjustment ifnecessary is made by the dismantling of the lateral screws (hexagon socket and hexagon) and moving theheight of the wheel guidesFig. 7: cutting with wheel guide6.2.4 Cutting with circular cutting attachmentThe torch holder is attached to the torch head to the limit stop and fastened with the grub screw.With the compass rod, which can be detached from the holder, circular parts with a diameter of 100 to 1000mm can be cut.The torch head is rotatable in the holder.The tip of the compass can be shifted and arrestedFig. 8: cutting with circular cutting attachment.33