PDF Download - LIG Nex1

LIG Nex1’s EMI Receiver Can verify every EMI standard in full compliance with CISPR in the frequency range from 3Hz to 26.5GHz.Experience the LIG Nex1’s EMI Receiver verified in the fields of EMI Conducted and Radiated EmissionCommercial standards◆ CISPR11.22◆ EN55011.55022◆ VDE0872.0879◆ ANSI-C63.4◆ FCC15, 18◆ EACL1.8Military standards◆ VG95370.95377◆ DEF-STAN49.41◆ GAM-EG13◆ MIL-STD-461EMain UsesFull Compliance for EMI standards(CE, RE)Used for a professional certification purpose, the EMI Receiver extracts precisemeasurement values by combining with an antenna within a standardizedchamber such as Test House. It also conforms to a variety of domestic andevery industry standards(CISPR 16-1-1). The built-in Pre-Selector enables theequipment to remove mutual interferences within the measuring bandwidthand to measure the noise value of EUT precisely while Tracking Generatoris designed not only to correct Pre-selector but also to enable to analyze theScalar Network simultaneously.Debugging for EMI R&D, LabDuring the EMI test , users can detect the exact weak points of the EUT under variousenvironments specified on the EMI standards of each country, and find how to improvethe design by testing its RF characteristics precisely In the specturm analyzer mode.LIG Nex1’s EMI receiver provides powerful spectrum analyzer performance andpersonalities such as Spurious Emission, Phase Noise, TOI, CCDF, and etc. basically sothat users can analyze the exact weak points and improve them.EMI Pre-Test for R&D, ManufacturingIn the fields of R&D and manufacturing for RF equipment, module, parts,and etc., The ER Series enables users to save high costs of the EMI Test anddebugging that are usually fulfilled the certified EMI lab or institution and reducethe trouble shooting time. Also, users can get the reliable EMI test results underthe various test environments by simulating the field correction factors usingthe convenient correction factor table.NSA(Normalized Site Attenuation): Environment test in ChamberMonitoring the test environment such as antenna, turn table, and etc. in thetest house(Chamber) specified in CISPR 16-1-4 automatically in real time, andcorrect it according to the gathered VSWR data. Users can optimize EMI testenvironment in the test house before starting EMI Test.3