MODEL H-340-0425™ - WaterLOG

MODEL H-340-0425STAINLESS STEEL TIPPING BUCKET RAIN GAUGEThe H-340-0425 Stainless Steel Tipping Bucket RainGage is designed for many years of accurate, troublefreeoperation. It is constructed entirely of stainlesssteel. Even contains a Stainless steel outer housing.It has a built in level indicator and pre-drilled feet.KEY FEATURES• Rain enters gauge through an eight inchorifice, protected by distortion preventingaluminum ring• Collected water passes through debrisfilteringscreen and is funneled into one oftwo tipping buckets inside the gauge. SDI-12Master mode• When a given amount of water collects,bucket tips (amount determined bycalibration).• Tipping causes magnet to pass overproximity switch, closing it momentarily.• Second bucket positions under funnel forfilling.• After rain is measured, it exits through draintubes with screen covered holes in the baseof the gauge.

SpecificationsSPECIFICATIONSMechanical OrificeSizeDimensionsWeightSwitchOperational OutputAccuracySensitivity/ ResolutionMaterialMISCELLANEOUSWarrantyNote20 cm (7.87 in.) Diameter8.25 in. (20.95 cm) Dia x 24 in. (609.6 cm)6.4 lbs (2.9Kg)Rugged magnetic proximity switch0.1 second switch closure± 0.5% at 0.5 mm/hr (1.27 cm/hr.)0.5 mmStainless steelThe WaterLOG® H-340 is warranted against defects inmaterials and workmanship for one year from date ofshipment.Specifications subject to change without prior noticedue to on going commitment to product testing andimprovement. LR April12, 2012. D7 0412.Design Analysis Associates Inc.75 West 100 South, Logan, Utah 84321 USATel: (435) 753-2212Fax: (435) 753-7669sales@waterlog.comwww.waterlog.com